Z6001 - Enterprise Security Distribution

Installation and operation manual
Z6001
INFINITE PLAY
DESCRIPTION:
Main power supply for INFINITEPLAY audio and video door entry systems.
START-UP TIME OF 2 MINUTES TO WAIT FOR ENTRANCE PANEL
SOUND
With internet service in the home, you can establish a connection between
power supply (P5) and router to see services such as weather, news,
directly from videophone.
Recommended the use of these cables, while respecting the CEI 64/8 for
video door entry systems.
UTP CAT 5e for domestic routes dedicated to video door phone system FTP CAT 5e shared routes with tension cables
UTP CAT 5e for outside with protective sheath in PVC
All cables LSZH for Low Smoke Zero Halogen
First to programming read the instructions carefully to get the full picture
on the features, functions and performance.
POWER SUPPLY INSTALLATION ART. Z6001 - Z6002
Mounting:
This device can be mounted on DIN rail cabinets equipped (12 DIN space
modules)
Connect the power supply with a bipolar switch breaker
Terminal:
TECHNICAL CHARACTERISTICS: Polymer housing ABS V0
Supply Voltage 90V - 260V the AC 50-60 Hz
Operating temperature 0 °C to +45 °C
Size 208x89x60 mm.
EN
2
INFINITE PLAY
RJ45 PORTS DESCRIPTION FOR VIDEO DOOR ENTRY SYSTEM
CONNECTION
Z6001
MAIN POWER SUPPLY ART. Z6001
Power supply unit PoE for villa or building video door entry system Z6002
RJ45 ports:
P1-P2-P3-P4 Dedicated to connecting ENTRANCE PANEL or VIDEO
DOOR PHONE
P5 is dedicated to connecting of ROUTER for INTERNET
MAIN POWER SUPPLY ART. Z6002
Power supply unit PoE for four family video door entry system P1 P
2 P3
P4 P
5
RJ45 ports:
P1-P2-P3-P4-P5 Dedicated to connecting ENTRANCE PANEL or VIDEO
DOOR PHONE
DISTRIBUTOR ON LANDING ART. Z60DV
Need to distribute of VIDEO DOOR PHONE RJ45 ports:
P1-P2-P3-P4-P5 Dedicated to the connection of VIDEO DOOR PHONE
Z60DV
Z60DT
DISTRIBUTOR ART. Z60DT
Need to distribute of ENTRANCE PANEL or CONCIERGE STATION RJ45 ports:
P1-P2-P3-P4-P5 Dedicated to the connection of a ENTRANCE PANEL or
CONCIERGE STATION
P1 P
2 P3
P4 P
5
FIREWALL ART. Z600F
If you need to connect to the internet in one of the houses is necessary to
insert an internal distributor 4 outputs FIREWALL Art.Z600F (attached
diagram)
Z600F
RJ45 ports:
P1-P2-P3-P4 Dedicated to the connection of ENTRANCE PANEL, VIDEO
DOOR PHONE and ROUTER for INTERNET
P5 Input connection to backbone
EN
P1 P
2 P3
P4 P
5
3
INFINITE PLAY
MATERIAL NEEDED:
1 skein of CAT5 Ethernet cable
Connectors RJ45 plug
1 scissor
1 crimping tool 8-pin
Recommended a tester for checking LAN cables
MAKE A STRAIGHT CABLE
PIN$
Code$color$T568B$
1"
White"orange"
2"
Orange"
3"
White"green"
4"
Blue"
5"
White"blue"
6"
Green"
7"
White"brown"
8"
Brown"
PROCEDURE:
1) SKINNING CABLE (25-30 mm)
2) ORDER cable as shown and line-up , cutting the connectors with
scissors at the same height (about 10mm)
3) INSERT THE CABLE IN CONNECTOR RJ45 as shown in figure
4) CRIMPING WIRE with clamp
5) FINAL CHECK OPERATION with tester
Altezza
10mm
EN
4
INFINITE PLAY
SYSTEM PROGRAMMING
There are two types of configurations:
1) Using an internal video door when you first start is recommended for
small building
2) For systems of higher dimensions can be a system configuration from a
PC by software
To be connected PC to any RJ45 port of InfinitePlay system by patch
cords.
IIP SETUP INSTALLER:
KEY PASSWORD: 000000
Setup by video door phone VIDEO DOOR PHONE ID ( ten digit code ):
Building 01
Floor 103
Apartment 050
Internal device 04
PHASES OF CONFIGURATION:
The configuration steps of the system are divided into only 5 points:
1.  BASIC SETTINGS
2.  ENTRANCE PANEL
3.  POWER SUPPLY
4.  VIDEO DOOR PHONE
5.  MAPPING ENTRANCE PANEL
1. BASIC SETTINGS
To be programmed the basic parameters for system
CONCIERGE ( yes / no )
SOS PANIC BUTTON ( yes / no )
VIDEO DOOR PHNE VISIBILITY SYSTEM( all video intercom device/ only
master video intercom device )
SYSTEM SETTING TIME (GMT 00)
SETUP INFINITEPLAY SYSTEM LANGUAGE CHANGE PASSWORD OF SYSTEM ( default 000000 )
2. ENTRANCE PANEL
To be programmed all parameters of entrance panel in the system
IDENTIFICATION NUMBER (Mac address out door unit )= B4669800F3
CUSTOM ID NUMBER: from 1 to 200 unit
NAME ENTRACE PANEL: Regent St
SUBTYPE: Choose the subtype of call (1-4 touch buttons, list on LCD
display, buttons on LCD display ) ANSWER TIME (1 to 255 s) Default value 30 s
CONVERSATION TIME (1 to 255 s) Default value 120 s
SELF-START TIME(1 to 255 s) Default value 30 s
AUDIO INDOOR-OUTDOOR (0% to 100%) Default value 50%
ENTRANCE PANEL RINGTONE REPETITION ( yes / no )
Default value is yes
SAVE SETTINGS BEFORE YOU GET OUT OF SETUP
EN
BACK
SAVE
5
INFINITE PLAY
3. POWER SUPPLY
A video door phone INFINITEPLAY system can contain only one server
SIP Z6001 and several distributors Z60DT
IDENTIFICATION NUMBER = 0000000000
DEVICE NAME: es: Z6001 Main elettrical panel
OUTPUT
FUNCTION:
To be assign one of the following functions that appear in the video
intercom. If you have an “X” the function is disabled.
CODE:
You can assign an identification number to each OUTPUT activated by
outdoor unit with display. code set preceded by # symbol (eg. # 123)
TIMEOUT:
The time of OUTPUT can be programmed
TIME LOCK: ( from 1 to 30s ) default value 1s
TIME AUX1: ( from 1 to 30s ) default value 1s
TIME AUX2: ( from 1 to 30s ) default value 1s
TIME AUX3: ( from 1 to 30s ) default value 1s
ENTRANCE PANEL:
Through ”entrance panel" binds the selected function to one or more
entrance panel present in the system.
To a call from entrance panel will be displayed one priority function.
LINK:
This parameter enables indirect opening of the lock, at the same time as
the opening of the lock of another entrance panel, at the command of an
interphone/monitor interphone. Indirect opening can be associated with
different entrance panels. For example: LOCK type Z6001 (1) with LOCK type Z60DT (2).
When you press lock push button, will operate both entrance panel at
same time by their respective power supplies.
INPUTS
Module type Z6001 receives the command from four N/O push button
and when closing, they send the messages to output.
( ex. Light stair push button )
INPUT CALL allows you to make a call from an entrance panel to an
indoor video door phone.
SAVE SETTINGS BEFORE YOU GET OUT OF SETUP
EN
6
INFINITE PLAY
4. VIDEO DOOR PHONE
At the first installation is requested the physical position of the device:
PROGRAMMING ID IDENTIFICATION CODE
Building 01
Floor 103
Apartment 050
Internal device 04
In the INFINITELAY kits the monitor ID CODE : 01 000 001 00
USER NAME: (ex. Famili Briyan )
The name will appear in the display entrance panel Art.Z100D – Z200D
The name will appear in the intercom contacts
VISIBILITY ENTRANCE PANEL:
You can select the list of entrance panels that can call this device.
Default all entrance panels call everyone users
FILTER FUNCTIONS AVAILABLE:
At the request of a end user, you can disable an auxiliary function that is
also used by other residents
VISIBILITY VIDEO DOOR PHONE:
With this function you can define the visibility of the indoor unit intercom
1) INTERNAL INTERCOM CALLS
Select the list of all internal devices apartment that you can call
2) EXTERNAL INTERCOM CALLS
Select the list of the internal intercom of the building that you can call
DOCTOR MODE: (yes/no)
When a call comes in this monitor sends the command lock automatically
on power supply.
AUTO ANSWER: (yes / no)
By activating this function, the indoor unit will enter into conversation with
the outdoor unit automatically after a few seconds
INTERCOM GROUPS:
With this function you can define a group of calls by choosing the origin of
the call. (Eg. To join an indoor unit slave with his master)
1) TO CALL FROM EXTERNAL UNIT
2) TO CALL FROM INDOOR UNIT INTERNAL TO THE APARTMENT
3) TO CALL FROM INDOOR UNIT EXTERNAL TO THE APARTMENT
ECHO CANCELLATION:
With this function you can choose the degree of noise cancellation of your
INDOOR UNIT device InfinitePlay.
1)
Normal (recommended by the factory)
2)
hard
3)
strong
SAVE SETTINGS BEFORE YOU GET OUT OF SETUP
EN
7
INFINITE PLAY
5. MAPPING ENTRANCE PANEL ENTRANCE PANEL SETUP
Select the entrance panel to set their parameters ( touch push button or
display)
ENTRANCE PANEL TOUCH BUTTONS Z1001-Z2001 If in the presence of a outdoor unit touch buttons must be set:
TOUCH BUTTONS 1 call the indoor unit 01000001000 - Famili Briyan ENTRANCE PANEL TOUCH DISPLAY Z100D-Z200D If in the presence of a outdoor unit display must be set:
PROPERTY LOGO: In JPG format
PANEL RINGTONE REPEAT (sound/ring.mp3) suggested
VOLUME ENTRANCE PANEL (from 0% to 100%)
Default value 20% suggested
STAUTS MESSAGE ( yes/no)
If you set YES the entrance panel show messages
(Calling, in conversation, door lock opened, end the conversation)
ENABLE ANIMATION (yes/no)
With this function activates an animation in the outdoor unit display that
ease the visitor in the use of the outdoor device
SHOW CODE BUTTON (yes/no)
Using this function enables the possibility to activate an automation from
the outdoore unit by code (ex.#123)
ENABLE RECEPTION BUTTON (yes/no)
With this function you enable a button dedicated to the call of concierge
station.
BUILDING NAME: ( ex.Residence Argenta )
STREET NUMBER: ( ex. 26 ….. 2B )
WELCOME MESSAGE
ALTERNATION MESSAGE
TIME ALTERNATION: Settable in seconds
SAVE SETTINGS BEFORE YOU GET OUT OF SETUP
EN
8
INFINITE PLAY
OPERANTING ISTRUCTIONS
1. FUNCTION BAR ( BUTTONS ON THE RIGHT) HOME RETURN SETUP
SEARCH
2. VIDEO DOOR PHONE WIDGET
LOCK LIGHT STAIR
GATE 3. DATA AND TIME
4. METEO (with internet connection)
5. VIDEO DOOR PHONE FUNCTION
Available to the call (green symbol)
Do not disturbe (red symbol, choose how long)
ANSWERING A CALL
1.  VIDEO DOOR PHONE FUNCTION
2.  TO END THE CALL
3.  MUTE MICROPHONE
4.  TO ANSWERING A CALL
IPCALL VIDEO DOOR PHONE APP
1.  VIDEO DOOR PHONE FUNCTION
2.  CONCIERCE LIST
INTERCOM CONTACT LIST
ENTRANCE PANEL LIST
LOG ACTIVITIES
3.  SETUP / AUDIO SETTINGS
3
4
1
5
2
2
3
1
4
2
3
1
MESSAGING
TO SEND TEXT MESSAGES AND FILES ( JPG – PDF ) FROM MONITOR
TO CONCIERCE AND FROM CONCIERGE TO MONITOR
THE COMMUNICATION IS ABLE BETWEEN INTERNAL MONITOR AND
CONCIERCE
EN
9
INFINITE PLAY
OPERATION:
Important: For the monitor operation, the ID must have already been programmed. To check this, in all devices
Operating times
The answer and the conversation times depend on the configuration of the
corresponding entrance panel parameters. -  Answer time (for entrance panel call): Default value 30 s
-  Answer time (for intercommunicating call): 30 s
-  Conversation time (for entrance panel call): Default value 120 s
-  Self-activation time (for entrance panel call): Default value 30s
Answering a call
A call from the outdoor entrance panel or from an intercommunicating
device can be answered during the chime cycle or once it has ended. To
answer, press green push button; to end the call, press red push button.
Receiving a door call
The monitor can receive calls from a door call button if connected to
terminals M and FP directly When the door call button is pressed, the
monitor emits a different tone to the one used for outdoor entrance panel
calls or intercommunicating calls.
Making an intercommunicating call
To make a call to another indoor unit, is neccessary to open the videodoor
phone app and choose the name to the contacts list.
Muting the ringtone during a call (Mute function)
When receiving a call from an outdoor entrance panel or from an intercom
device, the call ringtone can be muted by pressing button MUTE in home
page widget. You can set the mute time ( for example 30 minutes )
Door lock command
If you press the lock button by home page widget to send a lock opening
command to the entrance panel. The lock is connect to the power supply
for security Self-start
The videodoor phone is able to recognize the entrance panel or CCTV
cameras.
From the entrance list you can make a self-start function for monitoring
and conversation.
Calling a concierge station
Form the concierge list you can call the concierce service ( lobby,
managment office, guard office)
Alarm and Panic buttons
The monitor can sand two alarms to Concierce station
Connecting a button dirctly to terminals M and AL, you can sand an alarm
( gas detector, smoke detector ) to concierge
If connecting a button dirctly to terminals M and P, you can sand an panic
alarm to concierge . This function is able from widget SOS
Choice a ringtone
Through the settings you can choose between different electronic
ringtone.
Ringtone volume adjustment
Through the settings you can choose between different volume levels plus
mute.
EN
10
INFINITE PLAY
SINGLE RESIDENCE SYSTEM WITH 7” VIDEO DOOR PHONE AND ONE AUDIO-VIDEO ENTRANCE PANEL
Video door phone
GND
HOME INTERNET
M
Relè additional chime
CH2
Relè additional chime
CH1
Alarm INPUT
AL
Outdoor call button
FP
Panic Button
P
Power -
PW-
Power +12V
PW+
RJ45
CAT5
2
CAT5
1
P1
P2
RJ45
Cable
CAT 5
Lock
1,5 mm2
Other
1 mm2
EN
IN1
GND
N
IN2
IN3
IN4
GND GND
Mains
90-260Vac
50-60Hz
GND – INPUT
AUX3 - free
AUX1- Stair light
L
GND – INPUT
1,2,3,4,5
AUX2 – Driveway gate
Up to 100mt
P5
Power Supply
Z6001
COM
AUX3 COM
AUX1 COM AUX2
2
1
3
Terminals
P4
PORTE RJ45
USB
Conductor section
P3
IN4 – free
S+
IN2 – Stair light
12Vcc 1A Lock
IN3 – Driveway gate
S-
IN1–Lock release
Lock return
CAT5
Entrance panel
Video door phone
Entrance panel
RJ45
Entrance panel
Video door phone
USB
11
INFINITE PLAY
DOUBLE RESIDENCE SYSTEM WITH 7” VIDEO DOOR PHONE AND ONE AUDIO-VIDEO ENTRANCE PANEL
GND
M
Relè additional chime
CH2
Relè additional chime
CH1
Alarm INPUT
AL
Outdoor call button
FP
Panic Button
Video door phone 2
P
Power -
PW-
Power +12V
PW+
RJ45
2
USB
GND
Relè additional chime
CH2
Relè additional chime
CH1
Alarm INPUT
AL
Outdoor call button
FP
Panic Button
P
Power -
PW-
Power +12V
PW+
RJ45
CAT5
2
Entrance panel
Video door phone
Entrance panel
RJ45
CAT5
1
Lock return
S-
12Vcc 1A Lock
S+
P1
P2
Power Supply
Z6001
1,5 mm2
Other
1 mm2
EN
IN3
IN4
GND GND
AUX3 - free
IN2
GND – INPUT
Lock
IN1
IN4 – free
CAT 5
N
IN3 – Driveway gate
Cable
GND
IN2 – Stair light
RJ45
L
IN1–Lock release
1,2,3,4,5
P5
AUX2 – Driveway gate
Up to 100mt
P4
COM
AUX3 COM
AUX1 COM AUX2
2
1
3
AUX1- Stair light
Terminals
P3
PORTE RJ45
USB
Conductor section
Internet of building
USB
Mains
90-260Vac
50-60Hz
GND – INPUT
Video door phone 1
CAT5
M
12
INFINITE PLAY
DOUBLE RESIDENCE SYSTEM WITH 1 VIDEO DOOR PHONE, 2 VIDEO DOOR PHONES WITH INTERNET CONNECTION AND ONE AUDIO-VIDEO
ENTRANCE PANEL WITH TWO PUSH BUTTONS
HOME INTERNET
M
CH2
CH1
AL
FP
P
PW-
Video door phone 2
with internet connection
CAT5
FIREWALL Distributor
Z600F
PW+
2
USB
M
CH2
CH1
AL
FP
P
CAT5
PW-
Video door phone 1
Internet of building
PW+
2
USB
Entrance panel
CAT5
1
RJ45
Conductor section
Terminals
Up to 100mt
1,2,3,4,5
RJ45
Cable
CAT 5
Lock
1,5 mm2
Other
1 mm2
EN
Power Supply
Z6001
12Vcc 1A Lock
13
INFINITE PLAY
MULTIPLE RESIDENCE SYSTEM WITH ONE AUDIO-VIDEO ENTRANCE PANEL, POWER SUPPLY, DISTRIBUTOR AND 12 VIDEO DOOR PHONES M
CH2
CH1
Video door phone
AL
Distributor Z60DV
FP
P
PW-
Video door phone
PW+
CAT5
2
Video door phone
M
CH2
Distributor Z60DV
USB
CH1
AL
FP
CAT5
P
PWPW+
CAT5
2
Video door phone
Distributor Z60DV
USB
Entrance panel
CAT5
1
RJ45
Internet of building
Conductor section
Terminals
Up to 100mt
1,2,3,4,5
RJ45
Cable
CAT 5
Lock
1,5 mm2
Other
1 mm2
EN
Power Supply
Z6001
12Vcc 1A Lock
14
INFINITE PLAY
BUILDING COMPLEX SYSTEM WITH TWO AUDIO-VIDEO ENTRANCE PANELS, POWER SUPPLY, CONCIERGE STATION AND DISTRIBUTOR
M
CH2
CH1
AL
Video door phone
P
PW-
Video door phone
PW+
CAT5
2
Distributor Z60DV
FP
USB
Entrance panel
CAT5
1
Distributor Z60DV
Distributor Z60DT
1
12Vcc 1A Lock
INTERNET
of building
CONCIERGE
CAT5
12Vcc 1A Lock
Power Supply
Z6001
Conductor section
Terminals
Up to 100mt
1,2,3,4,5
RJ45
Cable
CAT 5
Lock
1,5 mm2
Other
1 mm2
EN
15
INFINITE PLAY
CONNECTION VARIANTS:
WIRING DIAGRAM ADDITIONAL ELECTRONIC CHIME
Additional chime C.A.
Power supply
12 Vdc
GND
M
Relè additional chime
CH2
Relè additional chime
CH1
Alarm INPUT
AL
Outdoor call button
FP
Panic Button
Power supply
230Vac
Relè
P
Power -
PW-
Power +12V
PW+
RJ45
2
Video door phone
USB
Additional chime C.C.
=
GND
M
Relè additional chime
CH2
Relè additional chime
CH1
Alarm INPUT
AL
Outdoor call button
FP
Panic Button
Power supply
12 - 24Vdc
P
Power -
PW-
Power +12V
PW+
RJ45
2
Video door phone
USB
WIRING DIAGRAM DOOR CALL BUTTON GND
M
Relè additional chime
CH2
Relè additional chime
CH1
Alarm INPUT
AL
Outdoor call button
FP
Panic Button
Contact – Push button - Sensor
P
Power -
PW-
Power +12V
PW+
RJ45
ALLARM INPUT to concierge
2
Video door phone
USB
EN
16
INFINITE PLAY
CONNECTION VARIANTS:
WIRING DIAGRAM DOOR RELESE CONTROL S-
P1
P2
S+
P3
P4
P5
PORTE RJ45
L
Power Supply
Z6001
USB
IN1
N
IN2
IN3
IN4
AUX15$Stair$light$
2A@24Vdc$$
Mains
90-260Vac
50-60Hz
GND GND
IN2 – Stair light
AUX3 - free
AUX2 - Driveway gate
COM
AUX1 COM AUX2
AUX3 COM
2
1
3
GND
GND – INPUT
Lock return
12Vcc 1A Lock
STAIRS LIGHT CONTOL
WIRING DIAGRAM DOOR RELESE CONTROL
wire 1,5mm2
P1
P2
S+
P3
L
Power Supply
Z6001
IN1
IN1– Lock release
AUX3 - free
AUX2 – Driveway gate
COM
AUX1 COM AUX2
AUX3 COM
2
1
3
AUX1- Stair light
P5
PORTE RJ45
USB
12Vcc 1A Lock
P4
GND
N
IN2
IN3
IN4
Mains
90-260Vac
50-60Hz
GND GND
GND – INPUT
S-
DOOR RELEASE CONTROL
EN
17
INFINITE PLAY
INSTALLATION NOTE : EN
18
INFINITE PLAY
Directive 2012/19/UE (WEEE)
The crossed-out wheelie bin symbol marked on the product indicates that
the product must be assigned to a differentiated collection centre for
electrical and electronic equipment or returned to the dealer to purchase a
new product.
For further details regarding the collection systems available, contact your
local waste disposal service.
The user is responsible for assigning the equipment purchased, to the
appropriate collection facilities.
Risks connected to substances considered as dangerous (WEEE).
According to the WEEE Directive, these electrical and electronic products
contain harmful substances for people and the environment.
It is obligatory treat the recycling of the materials in such way to avoid
negative impacts on the environment and people’s health.
Adaptation to current regulations allows a correct recycling of which the
product is made..
SAFETY INSTRUCTIONS FOR INSTALLERS
This equipment is used in video door entry and home & building
automation systems.
The instructions in this document provide important information about
safety, installation, use and maintenance of the product.
Verify that the equipments are undamaged, after purchase.
The packaging contains potential dangerous sources for children (screws
and dowels).
The installation must respect the current CEI regulations.
It is necessary to install to the power sypply a protection bipolar type
switch to video door entry system.
Before connecting this equipment verify the output voltage supplied from
the distribution network.
Before performing maintenance operations, disconnect the device.
In case of failure or malfunction, disconnect the device and contact the
technical assistance centre.
Do not obstruct opening of ventilation or heat exit slots.
The protection bipolar type switch must be located in the main framework
of the House.
WARNING:
This equipment must be fixed to the wall according to the installation
instructions.
This leaflet must always be attached to the system documentation.
Product is according to EC Directive 2004/108/EC, 2006/95/EC and
following norms. EN
19
Via Monte Grappa, 25
31020 Villorba (TV) ITALY
Tel. 0422 350680
Fax. 0422 446958
www.infiniteplay.com
ENG
18901001 – RL00 01 14
ZEALABS - ITALY