MDO2-LON - MAHA Maschinenbau Haldenwang GmbH &

MDO2-LON
EMISSION MEASUREMENT TECHNOLOGY
TRÜBUNGSMESSGERÄT
VP 135022
Emission Tester for diesel engines (opacimeter)
DESCRIPTION:
w Official German PTB-approval 18.09
w Complies with ECE R24, ISO 3173 and ISO/TC22/SC 5 N
650 provisions and guidelines.
w Time-saving trouble-free testing and diagnosis of emission
turbidity using partial current procedure with free acceleration
or with engine under load
w Single or continuous testing
w Integrated test chamber temperature sensor
w High-powered test chamber heating
w Oil temperature & RPM recording
w 2 serial RS 232 connections for
« hand terminal or PC
« external testing equipment (LPS 2000)
w Display unit via display integrated in hand terminal Thus
menu-assisted operator control possible, acceleration time
information acquisition, test-relevant data entry (ident and
target data), graphic, alpha/num. documentation of test results
w Exhaust-emitting parts made of high-quality stainless steel
w Sealed with heat-resistant synthetic material.
1
STANDARD DELIVERY:
Stainless steel construction with protective plastic casing
Turbidity test cell with optical measurement
230 V power supply
RS 232 connection
Emission probe for cars with hose (length 1.5 m),
max. 300 degrees C
w Hand terminal with LCD display (two-line), printer and
5 m connection cable
w Packing included
w
w
w
w
w
TECHNICAL DATA:
Measurement principle
absorption photometry
VZ 990446
MGT 300 EVO
Wave length of the spotlight
567 nm
VZ 990281
RPM extension cable (4 m) for magnetic sensor
Measurement chamber length
430 mm
VZ 990284
RPM extension cable (4 m) for battery
VZ 990282
RPM cable for Power Supply
External/Internal diameter of test
chamber
Warm-up time of the measurement chamber approx.
On-board voltage
Power consumption average/max.
Power supply
Dimensions total (L x W x H)
Weight
Single chip processor
LCD
Measurement range turbidity
Measuring range absorption
coefficient
Dimensions hand-held (H x W x D)
Hand-held terminal weight
Power supply via opacimeter
Power consumption average/max.
Connection options
2
ACCESSORIES:
28 mm / 25 mm
180 s
12 V / 24 V
0,11 kW / 0,13 kW
1/N/PE 230 V 50 Hz
245 mm x 55 mm x 125 mm
13 kg
Hitachi H8/532
2 x 16 positions
0 - 100 %
VZ 990283
RPM-Power Supply
VZ 990439
AVL DITEST SPEED 2000
VZ 910138
RPM Power Supply for AVL DISPEED
VZ 911205
RPM extension cable (5 m) for combi sensor
VZ 910139
RPM DigiAnzeige AVL DITEST SPEED 2000
VZ 990221
RPM Light Signal Sensor w. reflective spots
VZ 990227
MDO2-LON TDC-Sensor Cable
VZ 990113
MB-Revolution Converter
VZ 990231
MB-Universal Connector
VZ 990114
MB Connector for Impulse Counter
VZ 990124
MB-Adapter cable for commercial vehicles
1 - 9,99 m-1
VZ 990134
MB-Adapter cable for BR400 EDC
245 mm x 550 mm x 230 mm
VZ 990290
MB RPM-Determination
0,76 kg
VZ 990255
RPM Smart CDI Box
12 V
VZ 990230
Diagnostic Cable IVECO (MDO2-LON)
0,25 A / 0,5 A
VZ 990289
Diagnostic socket adapter cable f. IVECO
RPM sensor, oil temperature
sensor
VZ 990225
Oil temperature sensor for cars
VZ 990226
Oil temperature sensor for cars and trucks
VZ 990447
IR Oil Temperature Gauge
VZ 980012
Additional Charge for Exhaust Probe 600 °C
VZ 980027
Diesel Emission Probe for Cars, max. 650 °C
VZ 980025
Emission probe f. Northern Ireland & Costa Rica
VZ 980022
Emission probe for trucks 300 °C MDO2-LON
VZ 980023
Emission probe f. full power testing 600 °C
VZ 990262
Holder for Truck Emission Probe (Vertical Stacks)
VZ 945001
Bag for Storing and Carrying Exhaust Probes
VZ 975089
Trolley with rubber wheels
VP 975479
Trolley for single or combi tester
VZ 990224
Extension cable MDO2-LON - hand term., 10 m
VZ 990048
Cable for on-board power supply 12/24 V
VZ 990098
Cable (5 m) for Connection 12/24 V
VZ 990247
Mains cable for MDO2-LON, 18 m
VZ 994017
Rugged case with foam insert
VZ 994004
Sturdy Carrying Case
VZ 994010
Aluminium carrying case f. one emissions tester
VZ 994012
Trolley for Carrying Case
VZ 990223
Chip-card reader for MDO2-LON
VZ 990193
Chipcard V 16.0
VZ 990125
Gauge Cable Diameters
VZ 970001
Calibr. filter approx. 50% (grey disk with frame)
VZ 990357
Special calibration filter ca. 25% for maintenance
VZ 990107
Calibr. filter for repair ca. 50%
VZ 990358
Special calibration filter ca. 70% for maintenance
VZ 990288
Special calibration filter, EC 72/306
MAHA Maschinenbau Haldenwang GmbH & Co. KG | Hoyen 20 | 87490 Haldenwang | Germany
Phone: +49 8374 585 0 | Fax: +49 8374 585 497 | sales@maha.de | www.maha.de
Download PDF

advertising