RP1300 User‟s Manual
RP1300 User‟s Full Manual
MODEL:
Phase:
Originator:
Dept.
DATE:
RP1300 SERIES
ADD Model
JUL 10th ,2013
(RP1300)
Rugged & Professional
RP1300 Integrator Manual
July 19, 2013
RP1300 User‟s Manual
2
© 2013 by Gen2wave, Inc. All rights reserved.
No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,
without permission in writing from Gen2wave. This includes electronic or mechanical means, such as
photocopying, recording, or information storage and retrieval systems. The material in this manual is subject
to change without notice.
The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is
on a licensed basis. Gen2wave grants to the user a non-transferable and non-exclusive license to use each
software or firmware program delivered hereunder (licensed program). Except as noted below, such license
may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of
Gen2wave. No right to copy a licensed program in whole or in part is granted, except as permitted under
copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program
with other program material, create a derivative work from a licensed program, or use a licensed program in
a network without written permission from Gen2wave. The user agrees to maintain Gen2wave‟s copyright
notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it
makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any
licensed program delivered to the user or any portion thereof.
Gen2wave reserves the right to make changes to any software or product to improve reliability, function, or
design.
Gen2wave does not assume any product liability arising out of, or in connection with, the application or use
of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppels, or otherwise under any Gen2wave, Inc.,
intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained
in Gen2wave products.
Gen2wave, Inc.
http://www.gen2wave.com
RP1300 User‟s Manual
3
The R&TTE Directive
The European Radio equipment and Telecommunications Terminal Equipment (R&TTE) Directive
(1999/5/EC) was published in the Official Journal of the European Communities on 7 April 1999. It
covers all radio equipment and all equipment intended to be connected to public telecommunications
networks
The R&TTE Directive relies for its operation on Harmonized Standards developed by the recognized
European Standards Organizations. These Harmonized Standards define technical characteristics which
can be used to meet the essential requirements of the Directive
RP1300 User‟s Manual
4
Revision History
Changes to the original manual are listed below:
Version
Date
Description
Rev 1.0
13/01/29
Card slot image
Rev 1.1
13/10/28
Define reset functions
0984
RP1300 User‟s Manual
5
Table of Contents
RP1300 User‟s Full Manual............................................................................................................................................................................... 1
Revision History ..................................................................................................................................................................................................... 4
About This Guide .................................................................................................................................................................................................. 8
Introduction.................................................................................................................................................................................................... 8
Software Versions........................................................................................................................................................................................ 9
Build Version/Software Name and Version .................................................................................................................................... 9
AKU Version .......................................................................................................................................................................................... 9
System Version .................................................................................................................................................................................... 9
Service Information ..................................................................................................................................................................................10
Getting Started ....................................................................................................................................................................................................11
Introduction..................................................................................................................................................................................................11
RP1300 Specifications .............................................................................................................................................................................11
Unpacking the RP1300 ...........................................................................................................................................................................13
Getting Started ...........................................................................................................................................................................................14
Installing a microSD Card .....................................................................................................................................................................14
Installing the SIM Card ...........................................................................................................................................................................15
Installing the Battery................................................................................................................................................................................16
Charging the Main Battery ...................................................................................................................................................................17
Table 1-1 LED Charge Indicators .............................................................................................................................................17
Checking the Battery Status.................................................................................................................................................................18
Resetting the RP1300 ..............................................................................................................................................................................19
Performing a Soft Reset Boot .............................................................................................................................................................20
Performing a Hard Reset .......................................................................................................................................................................21
Performing a Clean Boot .......................................................................................................................................................................22
RP1300 Service Verification ...........................................................................................................................................................................23
Ensuring Network Coverage ................................................................................................................................................................23
Configuring a Data Connection...................................................................................................................................................................25
Connecting to an ISP ..............................................................................................................................................................................25
Connecting to a Network With a VPN Server ............................................................................................................................26
RP1300 Settings...................................................................................................................................................................................................27
Phone Tab .....................................................................................................................................................................................................27
Security Tab..................................................................................................................................................................................................28
Enabling a PIN ...................................................................................................................................................................................28
Changing a PIN .................................................................................................................................................................................29
Disabling a PIN .................................................................................................................................................................................29
Services ...........................................................................................................................................................................................................30
Call Barring (Call Blocking) ..........................................................................................................................................................31
Caller ID ................................................................................................................................................................................................31
Call Forwarding .................................................................................................................................................................................32
Call Waiting.........................................................................................................................................................................................32
Voice Mail and Text Messages..................................................................................................................................................33
Fixed Dialing .......................................................................................................................................................................................33
6
RP1300 User‟s Manual
Network..........................................................................................................................................................................................................34
Changing Networks Manually ...................................................................................................................................................34
Viewing Available Networks .......................................................................................................................................................35
Setting Preferred Networks.........................................................................................................................................................36
Via Wireless LAN .......................................................................................................................................................................................37
Accessories .............................................................................................................................................................................................................38
Introduction..................................................................................................................................................................................................38
Single Slot USB Cradle............................................................................................................................................................................39
Setup ...............................................................................................................................................................................................................39
Charging the RP1300 Battery ..............................................................................................................................................................40
Charging the Spare Battery ..................................................................................................................................................................41
Battery Charging Indicators .................................................................................................................................................................42
Table 2-1 Spare Battery LED Charging Indicators ...........................................................................................................42
Charging and Communication............................................................................................................................................................43
LED Charging Indicators ........................................................................................................................................................................43
Charge LED .........................................................................................................................................................................................43
Charging Temperature ..................................................................................................................................................................43
Using the Computer ..........................................................................................................................................................................................44
Adjusting the Volume of the RP1300 .............................................................................................................................................44
Using the Touch Screen .........................................................................................................................................................................45
Configuring the Backlight Settings ...................................................................................................................................................45
Using the Stylus .........................................................................................................................................................................................46
Understanding the Screen Icons .......................................................................................................................................................46
Aligning the Touch Screen ...................................................................................................................................................................47
Rotating the Screen .................................................................................................................................................................................47
Reading Bar Codes ...................................................................................................................................................................................48
Using the Color Camera ........................................................................................................................................................................49
Using a microSD Card.............................................................................................................................................................................51
Enabling the Integrated GPS on the RP1300 ..............................................................................................................................51
Using the A-GPS on the RP1300 .......................................................................................................................................................51
Button Assign Function ..........................................................................................................................................................................54
Connecting and Configuring the RP1300...............................................................................................................................................56
Connecting the RP1300 to a PC ........................................................................................................................................................56
Connecting the RP1300 to Your Network ....................................................................................................................................57
Connecting the RP1300 Using WIFI Communications ............................................................................................................58
Connecting the RP1300 Using Bluetooth Communications ................................................................................................60
Configuring the Phone ...........................................................................................................................................................................61
Turning On the Phone Using the Wireless Manager ..............................................................................................................61
Blue-Tooth that can be used simultaneously with Wi-FI ......................................................................................................62
Using Internet Sharing ............................................................................................................................................................................62
Making a Phone Call ...............................................................................................................................................................................65
Installing Applications ......................................................................................................................................................................................66
Installing Applications on the RP1300 ............................................................................................................................................66
7
RP1300 User‟s Manual
Installing Applications Using Microsoft ActiveSync .................................................................................................................67
Installing Applications Using a microSD Card ............................................................................................................................68
RP1300 User‟s Manual
8
About This Guide
Introduction
This Integrator Guide provides information about setting up and configuring the RP1300 and its accessories.
NOTE. Screens and windows pictured in this guide are samples and can differ from actual screens.
RP1300 User‟s Manual
9
Software Versions
This guide covers various software configurations and references are made to operating system or software
versions for:

Adaptation Kit Update (AKU) version

OEM version

Phone version

BT version

Fusion version.
Build Version/Software Name and Version
AKU Version
To determine the Adaptation Kit Update (AKU) version:
Tap Start > Settings > System > About icon > Version tab.
The second line lists the operating system version and the build number. The last part of the build number
represents the AKU number. For example, Build 29058.5.3.12.8 indicates that the device is running AKU
version 21903 5.0.92.
System Version
To determine the OEM software version:
Tap Start > Settings > System tab > System Info icon
RP1300 User‟s Manual
10
Service Information
If you have a problem with your equipment, contact Gen2wave Enterprise Mobility support for your region.
Contact Information is available at: http://www.gen2wave.com/
Manufacturing label
Gen2wave responds to calls by e-mail, telephone or fax within the time limits set forth in support
agreements.
RP1300 User‟s Manual
11
Getting Started
Introduction
This chapter provides information about the RP1300, accessories, charging, and resetting the RP1300.
RP1300 Specifications
Performance Characteristics
Battery(4000mA) Performance
CPU
Samsung S5PV210 1GHz
Standby time
220 hours
OS
Windows®Embeded Handheld 6.5.3
Talk time
10 hours
Memory
256MB SDRAM (512MB Optional)
User profiles
Outdoor WAN+GPS, 15min/hour voice
communication, 10kB transmission every
1G ROM
Communication
USB HOST 2.0 FULL SPEED
Interface
USB Client 2.0 HIGH SPEED
10 min, and GPS on all time, 10.5 hours
of operation.
Ext. Serial RS232C
Outdoor Voice, 15 min/hour voice
communication, 10.5 hours of operation
and 150 hours standby time.
Physical Characteristics
User Environment
Dimensions
139mm H X 73mm W X 21mm D
Sealing
Weight
270 gram with 1860mAH battery
Drop Spec.
1.5M drop to concrete.
315 gram with 4000mAH battery
Display
2 drops per 6 sides
Operating
4.3inch. WVGA
Main
-20°C ~ +60°C
Storag
-25°C ~ +70°C
Temp.
Input
Touch Panel, 4 side keys, power key
e
Battery
Standard : 1860mA/h ,3.7V,Li-ion
AC Power
Extended : 4000mA/h ,3.7V,Li-ion
Input : AC 100 ~ 240V, 50 ~ 60Hz
Output : DC +5.0V, 3.5A
Build-in backup battery : 200mA/h,3.7V,
(polymer)
Expansion Slot
High capacity micro SD Card
Audio
Speaker / Receiver / MIC
Wireless
HSPA+
(WWAN)
2100MHz
Relative Humidity
5% ~ 80%
EDGE GPRS GSM
900MHz/1800 MHz
Bluetooth
Class 2 (2402MHz~2480MHz)
Fully
Qualified
Bluetooth
v2.1+EDR
system (Intenna, BT Headset support)
Wireless LAN
2.4GHz 802.11 b/g/n
1D Laser Scanner (IS4813)
GPS
Embedded A-GPS
Signal Output
Digital, industry standard
Notification
Vibration and Charging LED
Resolution:
5 mil (0.127 mm)
Scanner
1D Laser Type
Roll:
42°
Pitch Angle:
68°
2D Imager
Color Camera
RP1300 User‟s Manual
12
Resolution:
5.0 megapixel
Yaw
52°
Illumination:
User controllable flash
Light Source
Visible Laser Diode 650 nm
Lens:
Auto Focus
Scan Rate
100 scan lines per second
2D Imager Engine (5100SR-110R)
Sweep Angle
54° minimum
Focal Distance
7 inches (17.8cm) from lens plate
Ambient Light
4842 Lux (450 foot-candles)
Sensor Resolution
752 x 480 pixels
Levels
Typical
5.2 mil 70 mm - 95 mm (2.8˝ - 3.78˝)
Performance*
7.5 mil 57 mm - 171 mm (2.3˝ - 6.8˝)
Narrow Width
Depth of Field
Image Sensor
752 X 480 CMOS sensor
*
10.4 mil 50 mm - 210 mm (2.0˝ - 8.3˝)
13 mil 50 mm - 254 mm (2.0˝ - 10.0˝)
19.5 mil 75 mm - 300 (3.0˝ - 11.8˝)
Performance may be impacted by bar code quality
and environmental conditions
Motion Tolerance
4 in. (10.2cm) per second
Rotational
360°
Regulatory
Sensitivity
Viewing Angle
+40°
Ambient Light
Total darkness to 100,000 lux
Immunity
(full sunlight)
Illumination LEDs
626nm +30nm
Aiming
LEDs: 526nm +30nm
Laser: 650nm +10nm
Peripherals and Accessories
Communication
USB Client 2.0 HIGH SPEED
Battery Chargers:
1-slot battery charger Cradle
Interactive Sensor Technology
Motion-sensor: 3-axis accelerometer that enables motion-sensing applications for dynamic screen orientation, and
Magnetic Field Sensor, power management and free-fall detect.
RP1300 User‟s Manual
13
Unpacking the RP1300
Carefully remove all protective material from the RP1300 and save the shipping container for later storage
and shipping. Verify that you received the following equipment:

RP1300

Lithium-ion battery

stylus

Quick Start Guide
RP1300 SRRIES
ADD MODEL
(RP1200)
BATTERY
STYLUS
Quick Guide
RP1300 User‟s Manual
14
Getting Started
To start using the RP1300 for the first time:

Install a microSD card (optional)

Install the SIM card

Install the main battery.

Charge the RP1300.

Power on the RP1300.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack.
Refer to the documentation provided with the card for more information, and follow the manufacturer‟s
recommendations for use.
CAUTION Follow proper ESD precautions to avoid damaging the SD card. Proper ESD precautions include,
but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded
To install the microSD card:
RP1300 User‟s Manual
15
Installing the SIM Card
★
NOTE
RP1300 configuration only
GSM phone service requires a Subscriber Identification Module (SIM) card, or smart card. Obtain the card
from the your service provider. The card can contain the following information:
★

Mobile phone service provider account details.

Information regarding service access and preferences.

Contact information, which can be moved to Contacts on the RP1300.

Any additional services to which you have subscribed.
NOTE
For more information about SIM cards, refer to the service provider's documentation.
To install the SIM card:
RP1300 User‟s Manual
16
Installing the Battery
★
NOTE
The RP1300 ships with either a 1860 mAh or 4000 mAh battery. The 1860 mAh battery is
shown in this installation procedure.
To install the battery.
Insert the battery, top first, into the battery compartment in the back of the RP1300.
Press the battery down into the battery compartment
Lock the Battery Release Latch
Battery Release Latch
RP1300 User‟s Manual
17
Charging the Main Battery
Before using the RP1300 for the first time, charge the main battery until the amber Charging/Battery Status
LED remains lit (see Table 1-1 for charge status indications). To charge the RP1300, use a cable or a cradle
with the appropriate power supply. For information about the accessories available for the RP1300, see
Accessories Chapter.
For cable and cradle setup and charging procedures see Accessories Chapter for more information.
Charge Only Cable
Single Slot USB Cradle
To charge the main battery:
Connect the charging accessory to the appropriate power source.
Insert the RP1300 into a cradle or attach to a cable. The RP1300 begins charging.
The Charging/Battery Status LED red while charging, then turns LED green when fully charged. See
Table 1-1 for charging indications.
The 1860 mAh battery fully charges in approximately four hours and the 4000 mAh battery fully charges in
approximately six hours.
Table 1-1 LED Charge Indicators
Charging/Battery
Indication
Status LED
Off
RP1300 is not charging.
RP1300 is not inserted correctly in the cradle or connected to a power
source.
Charger/cradle is not powered.
Red LED
RP1300 is charging.
Green LED
Charging complete
Do not use any other charger except one (5.0V / 3.5A) provide.
Make sure to handle it gentle; damage with excessive force may cause no warranty.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
When attached battery is completely discharged, plug charger to main body, then reset
the device to check if screen is back on.
Charging Spare Batteries
RP1300 User‟s Manual
18
See Accessories for information on using accessories to change spare batteries.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Note that charging is intelligently
controlled by the RP1300.
To accomplish this, for small periods of time, the RP1300 or accessory alternately enables and disables
battery
charging to keep the battery at acceptable temperatures. The RP1300 or accessory indicates when charging
is disabled due to abnormal temperatures via its LED. See Table 1-1.
Powering On the RP1300
After inserting the battery or when turning the RP1300 on for the first time, the splash screen displays for
about a minute as the RP1300 boots, then the calibration window appears.
Calibrating the Screen
NOTE
To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:
Remove the stylus from its holder on the side of the RP1300.
Carefully press and briefly hold the tip of stylus on the center of each target that appears on the
screen.
Repeat as the target moves around the screen, and then tap the screen to continue.
Checking the Battery Status
The easiest way to check the status of your battery is to look at the battery icon on the status bar of your
RP1300.
Battery Icon Status
Icon
Status
Battery is fully charged.
Battery has a medium charge. You should be able to work for several more hours
before changing batteries.
Battery is low. You need to charge or replace the battery soon.
Battery is critically low. You need to replace the battery now.
Battery is charging.
RP1300 User‟s Manual
19
Resetting the RP1300
You rarely need to reset the computer. If the computer or an application lock up, you may need to reset the
RP1300. The RP1300 uses the configuration currently saved in flash memory during the boot process. There
are three ways to reset the RP1300:

Soft Reset

Hard Reset

Clean booting
If the RP1300 is not functioning properly, perform a reset first. If the RP1300 still does not respond, perform
a hard reset.
Reset Type
How to perform
What happens
Remark
Hard Reset
Pushing reset button while
Contents in root and Flash
For now, contents in Ram
pushing and holding power
Disk are reserved.
Disk are reserved.
button.
Contents in Ram Disk are
It will be fixed soon.
cleared.
Power Management IC is also
initialized.
Soft Reset
Pushing reset button.
Contents in root and Flash
Could be done by API.
Disk are reserved.
Contents in Ram Disk are
reserved.
Clean Boot
Selecting Clean boot in the
Contents in root are cleared.
boot menu.
Contents in Flash Disk are
Could be done by API.
reserved.
Contents in Ram Disk are
cleared.
Factory Reset
Not supported currently.
Contents in root and Flash
Only
Disk are cleared.
upgrading OS.
Contents in Ram Disk are
cleared.
occurs
when
RP1300 User‟s Manual
20
Performing a Soft Reset Boot
You may need to perform a Soft Reset boot to correct conditions where an application stops responding to
the system.
To perform a Soft Reset boot:
Using the stylus, press the Soft Reset button.
Soft Reset Button
The RP1300 systematically shuts down.
The computer goes through the initialization process and restarts.
Splash Screen (Reset)
RP1300 User‟s Manual
21
Performing a Hard Reset
To perform a Hard reset boot:
Hold down the red Power button, and press the Reset button.
1) Hold down the Power button
2) Press the Reset button
Splash Screen (Hard-reset)
RP1300 User‟s Manual
22
Performing a Clean Boot
A clean boot resets the RP1300 to the factory default settings. All data in the Application folder is retained.
The clean boot process erases the RP1300 memory, including all applications and data files
in the object store. To preserve applications through a clean boot, store them in the Flash
File Store.
To perform a clean boot:
1.
Keeping pressing on the volume down button, press the reset button one time.
2)
Hold down the volume
down button
1)
Press the reset button
2.
You can see the „System Setup Screen‟.
3.
Select „2. Clean Boot‟ and then press enter button.
4.
When prompted, tap the screen to set up the RP1300.
5.
Follow the instructions to calibrate the screen
RP1300 User‟s Manual
23
RP1300 Service Verification
RP1300 phone and data services require a live SIM card, obtained from a service provider, installed in the
RP1300 phone. The SIM card has embedded circuitry on one side of its surface which, when inserted into an
RP1300 phone, provides phone service. The SIM card provides a phone number, determines the features or
services available to the subscriber, and identifies the subscriber to the network.
In addition to SIM card installation, the RP1300 may require various settings to operate as a phone with data
connection features.
Ensuring Network Coverage
1.
Ensure an activated SIM card, from the phone service provider, is installed in the RP1300.
NOTE
2.
The SIM card must be enabled to connect to the network.
Verify active phone and data services by tapping
to display the Phone dialog. The Carrier
name appears in the dialog box.
Connectivity Dialog
3.
Verify SIM card functionality:
A.
Tap Start > Settings > Personal > Phone icon > Network tab.
RP1300 User‟s Manual
24
Phone Settings Window - Network Tab
B.
Ensure the service provider‟s network appears in the Current network: field.
C.
If the network does not appear, tap Find Network. If the network still does not appear, verify that
the SIM card was installed correctly. If it was, and no network appears, contact the service provider.
RP1300 User‟s Manual
25
Configuring a Data Connection
Connecting to an ISP
You can connect to your Internet Service Provider (ISP), and use the connection to send and receive e-mail
messages and view web pages.
Get an ISP dial-up access telephone number, a user name, and a password from your ISP.
Tap the Help icon at any time to view additional information for the wizard or the settings.
To connect to an Internet service provider
1 Tap Start > Settings > Connections > Connections.
2 Under My ISP, tap Add a new modem connection.
3 Enter a name for the connection, such as “ISP Connection.”
4 If using an external modem connected to your RP1300 with a cable, select Hayes Compatible on
COM1 from the Select a modem drop-down list.
5 Tap Next.
6 Enter the access phone number and then tap Next.
7 Enter the User name, Password, and Domain (if provided by an ISP or your network administrator).
8 Tap Finish.
9 Tap the Advanced tab from the Connections screen and then tap Dialing Rules.
10 Select Use dialing rules, tap ok at the dialog box, and then tap Edit.
11 Specify your current phone type and then tap ok until you exit and return to the Settings page.
Once the RP1300 is connected, you can:
• send and receive message by using Messaging (Outlook E-mail).
• visit web pages by using Internet Explorer Mobile.
RP1300 User‟s Manual
26
Connecting to a Network With a VPN Server
A VPN connection helps you to securely connect to servers, such as a corporate network, through the
Internet. Before you can make a VPN connection, you will need the following items from your network
administrator:
• User name
• Password
• Domain name
• TCP/IP settings
• Host name or IP address of the VPN server
To create a VPN server connection to work
1 Tap Start > Settings > Connections.
2 Under My Work Network, tap Add a new VPN server connection.
3 In the Name field, enter a name for the connection, such as your company name.
4 In the Host name / IP field, enter the VPN server name or IP address.
5 Select the VPN type of authentication to use with your RP1300. If you are not sure which option to
choose, check with your network administrator.
6 Tap Next.
7 Select a way for the RP1300 to authenticate the connection. If you select A pre-shared key, enter the
key provided by your network administrator.
8 Click Next.
9 Enter the User name, Password, and Domain (if provided by an ISP or your network administrator).
10 Tap Finish.
RP1300 User‟s Manual
27
RP1300 Settings
Use the Phone Settings window to customize settings, such as the ring type and ring tone for incoming
calls, security options, and other options depending on the type of service.
Phone Tab
Use the Phone tab to customize ring type, ring tone, keypad tone, and security options.
Tap Start > Settings > Personal tab > Phone icon > Phone tab
or
Start > Phone > Menu > Options > Phone tab.
Phone Window - Phone Tab
Sounds
1.
Phone Number automatically displays on the Phone tab when a live SIM card is installed.
2.
Select a ring type from the Ring type: drop-down list. The ring type changes the way the RP1300
rings when you receive an incoming call. Regardless of the ring type selected, a dialog box appears
on the RP1300‟s display for incoming calls.
3.
Select a ring tone for incoming calls from the Ring tone: drop-down list. To hear a sample of the
selected ring tone, tap
4.
. Tap
to end the ring tone.
Select a keypad tone from the Keypad: drop-down list. This selection determines the tone that
sounds when entering a phone number on the keypad.
Select Short tones or Long tones to specify the duration of the sound when you press a number
on the keypad. Select Off to disable tones.
NOTE
Turning off sounds saves power and prolongs battery life.
RP1300 User‟s Manual
28
Security Tab
Enabling a PIN
NOTE
Place emergency calls at any time, without requiring a PIN or a SIM card.
Security Tab
To require a PIN when using the phone:
1.
From the Security tab, select the Require PIN when phone is used check box under PIN Security.
Enter PIN
2.
Use the touch keypad to enter a four to eight digit PIN.
RP1300 User‟s Manual
29
3.
Tap Enter to enable the PIN and return to the Phone tab.
Changing a PIN
CAUTION:
If you enter an incorrect PIN, the message “SIM PIN incorrect: Try again” appears.
After three consecutive incorrect attempts, the SIM card is blocked. The phone does not allow
you to attempt to enter your PIN again and you must obtain a PIN Unblock Key from your
service provider.
1.
From the Security tab (Phone Window - Phone Tab), tap Change PIN.
2.
Use the touch keypad to enter the current PIN.
3.
Tap Enter.
4.
Use the touch keypad to enter a new four to eight digit PIN.
5.
Tap Enter.
6.
Reenter the new PIN for confirmation and tap Enter.
7.
Tap ok to confirm the change.
Disabling a PIN
1.
From the Security tab, deselect the Require PIN when phone is used check box.
2.
Use the touch keypad to enter the current PIN.
3.
Tap Enter.
4.
Tap ok to confirm the change.
5.
Tap ok to exit settings.
RP1300 User‟s Manual
30
Services
Use the Services tab to configure settings for subscribed phone services. For example, block certain types of
incoming and/or outgoing calls, disclose the caller‟s identity when making outgoing calls, forward incoming
calls to a different phone number, receive notification of incoming calls when a phone session is in use, and
set up voice mail and short message service.
1.
Tap Start > Settings > Personal tab > Phone icon > Services tab.
or
Start > Phone > Menu > Options > Services tab.
Phone Window - Services Tab
2.
Select a service from the list and tap Get Settings... .
3.
Change services settings as follows.
RP1300 User‟s Manual
31
Call Barring (Call Blocking)
Use call barring to block certain types of incoming and/or outgoing calls. Select the type of incoming and/or
outgoing calls to block.
Call Barring
Caller ID
Enable caller ID to reveal the identity of the person making an outgoing call. Select the Everyone radio
button toalways display the caller ID. Select the No one radio button to prevent the caller‟s identity from
appearing to others.
Caller ID
RP1300 User‟s Manual
32
Call Forwarding
Call Forwarding may not be available on all networks. Check with your service provider for
NOTE
availability.

Use call forwarding to forward incoming calls to a different phone number.

To forward all calls to a different phone number:

select the Forward all incoming phone calls check box.

enter the phone number to receive forwarded calls in the To: text box.

To forward incoming calls to a different phone number based on a specific situation, select one or
more of the check boxes under Forward phone calls only if:.

No answer: enter the phone number to receive forwarded calls only when the phone cannot be

answered. Then select a time period from the Forward after: drop-down list. Options are 5, 10, 15,
20, 25, and 30 seconds.

Unavailable: enter the phone number to receive forwarded calls only when the phone is turned off
or the user is unreachable.

Busy: enter the phone number to receive forwarded calls only when the line is busy.
Call Waiting
NOTE
Call Waiting may not be available on all networks. Check with your service provider for availability.
Call waiting notifies you of an incoming call when the phone is in a phone session. Select the Notify me
radio button to enable call waiting. Select the Do not notify me radio button to disable call waiting.
Call Waiting
RP1300 User‟s Manual
33
Voice Mail and Text Messages
To use voice mail and send short messages, enter the voice mail and/or text message phone number in the
appropriate text boxes.
Voice Mail and Text Messages
Fixed Dialing
Use Fixed Dialing to restrict the phone to dial only the phone number(s) or area code(s) specified in a Fixed
Dialing list.
1.
Select Fixed Dialing and tap Get Settings.
2.
Select the Enable fixed dialing check box.
3.
To add a number to the list, tap Menu > Add.
4.
Enter the phone number or area code to restrict and tap Done.
5.
Repeat steps 3 and 4 to add more numbers, and tap Done twice when complete.
6.
Enter PIN2 and tap Done.
RP1300 User‟s Manual
34
Network
Use the Network tab to view available networks, determine the order in which the phone accesses another
network if the current network is unavailable, and specify whether to change networks manually or
automatically.
The current network remains active until it‟s changed, the signal is lost, or the SIM card is changed.
The network the RP1300 currently uses appears in the Current network: field at the top of the window.
Changing Networks Manually
1.
Tap Start > Settings > Personal tab > Phone icon > Network tab
Or
Start > Phone > Menu > Options > Network tab.
Phone Window - Network Tab
2.
From the Network selection drop-down list, select Manual.
Choose Network
RP1300 User‟s Manual
35
3.
From the Choose Network window, select the network to use.
4.
Tap OK.
Viewing Available Networks
To view all wireless networks available:
1.
Tap Start > Settings > Personal tab > Phone icon > Network tab.
or
Start > Phone > Options > Network tab.
Phone Window - Network Tab
2.
Tap Find Network.
Choose Network
3.
From the Choose Network window, select the network to use.
4.
Tap OK.
RP1300 User‟s Manual
36
Setting Preferred Networks
Set networks in a preferred order of access. Setting preferred networks allows the RP1300 to access a second
preferred network if the first is unavailable.
1.
Tap Start > Settings > Personal tab > Phone icon > Network tab
or
Start > Phone > Menu > Options > Network tab.
Phone Window - Network Tab
2.
Tap Set Networks to view all available networks.
Preferred Networks
3.
Select the preferred networks by tapping one or more check boxes.
4.
Tap Move Up and Move Down, as necessary, to place the selected networks in the preferred order.
5.
Tap ok to send the new settings to the network.
6.
From the Network tab, select Automatic from the Network selection drop-down list.
7.
Tap ok to exit settings.
RP1300 User‟s Manual
37
Via Wireless LAN



You can use the Wireless Network Via Wireless LAN.
supports IEEE 802.11b and 802.11g and 802.11n..
To connect the Wireless LAN (AP must be on and functioning)
RP1300 User‟s Manual
38
Accessories
Introduction
This chapter provides set up information for the following RP1300 accessories:

Charge Only Cable - Provides power to the RP1300.

USB Charging Cable - Provides power to the RP1300 and USB communication with a host
computer.

Single Slot Modem/USB Cradle - Charges the RP1300 main battery and a spare battery.
Synchronizes the RP1300 with a host computer through an Modem or USB connection.
RP1300 User‟s Manual
39
Single Slot USB Cradle
This section describes how to set up and use a Single Slot USB cradle with the RP1300. For USB
communication setup procedures see ActiveSync Chapter.
The Single Slot USB cradle:
• Synchronizes information between the RP1300 and a host computer. See ActiveSync Chapter for
information on setting up a partnership between the RP1300 and a host computer.
• Charges the RP1300‟s battery.
• Charges a spare battery.
Setup
AC Power
5V, 3.5A
USB Client
USB Host
Single Slot USB Cradle Power and USB Connections

Select switch on right : USB Host
RP1300 User‟s Manual
40
Charging the RP1300 Battery
Connect the cradle to power. Insert the RP1300 into the RP1300 slot to begin charging.
Charges the RP1300‟s battery
RP1300 User‟s Manual
41
Charging the Spare Battery
Spare Battery Charging
RP1300 User‟s Manual
42
Battery Charging Indicators
The Single Slot USB cradle charges the RP1300‟s main battery and a spare battery simultaneously.
The RP1300‟s Charging/Battery Status LED indicates the status of the battery charging in the RP1300. See
Table 1-1 for charging status indications.
The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cradle.
See Table 2-1 for charging status indications.
Charge Status LED
Charging Temperature.
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
RP1300. To accomplish this, for small periods of time, the RP1300 or accessory alternately enables and
disables battery charging to keep the battery at acceptable temperatures. The RP1300 or accessory indicates
when charging is disabled due to abnormal temperatures via its LED. See Table 1-1 and Table 2-1.
Table 2-1 Spare Battery LED Charging Indicators
Spare Battery LED
(on cradle)
Indication
Red LED
Spare battery is charging.
Green LED
Spare battery is fully charged.
Off
Not charging.
RP1300 User‟s Manual
43
Charging and Communication
Insert the RP1300 into a slot to begin charging.
LED Charging Indicators
Charge LED
The RP1300‟s charge LED shows the status of the battery charging in the RP1300. See Table 1-1 for charging
status indications.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
RP1300.
To accomplish this, for small periods of time, the RP1300 alternately enables and disables battery charging to
keep the battery at acceptable temperatures. The RP1300 indicates when charging is disabled due to
abnormal temperatures via its LED. See Table 1-1.
RP1300 User‟s Manual
44
Using the Computer
Adjusting the Volume of the RP1300
You can adjust the computer volume for your needs and your environment. The volume includes sounds you
hear when you tap the screen or scan bar codes with a scanner. You can set the volume to off, very low, low,
medium, high, very high (default), and vibrate.
You can use the Volume application (available from the navigation bar) or the Volume buttons (on the side
of the RP1300) to change the volume of the computer.
Volume Button
Location of Volume Buttons on the RP1300
To adjust the volume with the Volume application
1 Tap the Volume (
) icon at the top of the screen.
2 Use your stylus to adjust the volume slider to the volume you want, select Vibrate, or select Off.
To adjust the volume with the Volume buttons
• Press the upper side button to increase the volume.
• Press the lower side button to decrease the volume, set the volume to vibrate, or turn the volume off.
RP1300 User‟s Manual
45
Using the Touch Screen
The RP1300 has a 480 x 640 pixel color touch screen display. Main Screen is set below
Info Bar
Day/Time info
Wireless info
Message Info
Task Info
Today Info
Lock Info
Left / Right function info
Windows Mobile 6.5 Start Screen
To turn the screen LCD on and off
• For the keypad, press power key
Configuring the Backlight Settings
By default, the RP1300 goes into Screen Off mode when there is no activity on the computer. Screen Off
mode turns off the backlight and display. Press a key or tap the screen to resume activity.
To configure the backlight
1 Tap Start > Settings > System > the Backlight icon > the Battery Power tab.
2 With Turn off backlight if device is not used for checked, select the timeout value (30 seconds, or 1 to 5
minutes).
RP1300 User‟s Manual
46
Using the Stylus
Your computer has a stylus for selecting items and entering information on the touch screen.
Functions You Can Perform With the Stylus
Action
Description
Tap
Touch the screen once with the stylus to select options, open or close applications,
or launch menus from the Command bar.
Drag
Hold the stylus on the screen and drag across the screen to select text and images.
Tap and hold
Tap and hold the stylus on an item to see a menu of actions available for that item.
On the pop-up menu that appears, tap the action you want to perform.
Understanding the Screen Icons
Use the screen icons on the navigation bar and the command bar to see the network connection status and
other system information. For information about the battery icons, see “Checking the Battery Status”. Some
standard Microsoft icons are included in this table.
Screen Icons
Icon
Description
The volume is turned off. To turn the volume back on, tap this icon
and choose your setting.
The computer is connected to the network.
The computer is not connected to the network.
The 802.11 radio is connected to the wireless network.
RP1300 User‟s Manual
47
Aligning the Touch Screen
If the touch screen does not respond when you tap it with the stylus, you may need to calibrate the screen.
Before you calibrate the touch screen, make sure the RP1300 screen is unlocked.
To calibrate the touch screen
1 Tap Start > Settings > Systems > Screen.
2 Tap Align Screen and follow the instructions to align the screen.
3 Click ok.
If the touch screen is so out of alignment that you cannot open the Start menu, you may need to align the
screen menu using only the keypad.
Rotating the Screen
The internal accelerometer enables you to have the screen rotate by sensing the orientation of the RP1300.
You can enable the screen to rotate all the time depending on orientation, you can enable it to rotate for
specific applications, you can disable rotation for selected applications, or you can disable it.
To configure the screen rotation
1. Tap Start > Settings > Systems > TAS Config.
2. Calibration
3. Select the option (“Enable all”) you want to use.
RP1300 User‟s Manual
48
Reading Bar Codes
The RP1300 ships with an internal imager to read and enter bar code data.
To read a bar code
1.
Press Power key to turn on the RP1300.
2.
Point the scanner window at the bar code label, and hold the RP1300 steady a few inches from the
label.
3.
In File Explorer, Flash Disk > Scanner > ScanDemo > execute G2W_Scanner
4.
Press the Scan button. The laser pointer and illumination beam and frame appear.
5.
Use the laser pointer as a guide and aim toward the middle of the bar code. Make sure that the
illumination frame covers the bar code you are trying to decode.
When the RP1300 successfully reads a bar code label, you hear a high beep.
6.
Release the Scan button.
RP1300 User‟s Manual
49
Using the Color Camera
The high-quality 5.0 megapixel color camera with flash is a standard feature of the RP1300. You can take
photos in high, normal, or low quality, with image sizes up to 2048 x 1536 pixels. When you take a picture,
the images are saved as .jpg files and stored in the /MyDocuments/My Pictures folder.
Camera
Location of the RP1300 Color Camera
You can use the Pictures & Videos application on the RP1300 to take, view, and edit pictures or record and
launch video clips stored on the RP1300 or a storage card. You can also send pictures and video clips to
others or save an image as the background on the Today screen.
After you have opened up the camera application, you can configure camera options by tapping Menu.
You can zoom in or out on an image while using either camera mode or video mode.
Function
Still
Video
Comment
Mode
Normal, Burst, Timer
N/A
Setting for taking photo
Brightness
Resolution
-3, -2, -1, 0, +1, +2, +3
QCIF, QVGA, VGA, SVGA,
QCIF, QVGA
Setting for Brightness
Setting for size
XGA, SXGA, UXGA, QXGA
White Balance
Automatic, Sunny, Cloudy, Fluorescent, Incandescent
Setting for White
Balance
Flash
Flash ON, Flash OFF
Setting for Flash ON/OFF
AF
Trig AF
Setting for Auto Focus
RP1300 User‟s Manual
50
Camera is optional. On the device with no built-in camera, Camera function can not be used.
To take a picture with the camera
1 Tap Start > Pictures & Videos.
2 Tap the Camera icon in the grid, or tap Camera on the taskbar.
3 Using the screen as a viewfinder, move the camera until you have the image you want to capture.
4 Tap Take Pic on the taskbar or press Enter to save the image. If you select to save your pictures to Main
memory, they are saved to permanent storage on the RP1300.
5 Auto Focus: Press and hold “Enter” key for 2~3 sec. till you hear sound “Tik” and then release the key.
To switch to Video mode
• Tap Menu > Video Mode.
The camera icon below the screen turns into a video camera and Record now appears in the taskbar.
RP1300 User‟s Manual
51
To set options for saving pictures
1.
From the Pictures & Videos application, tap Menu > Options.
2.
Set these options:
• (Optional) A filename prefix. The default prefix is .img.
• Where you want to save picture files.
• The still image compression level.
3.
Click ok.
You can also set options for flash, video, quality, and some advanced options from the Settings menu.
Using a microSD Card
To install a microSD card
1.
Remove the battery.
2.
Insert the microSD card in the bottom slot.
3.
Install the battery.
4.
Turn on the RP1300
You should be able to navigate to the Storage Card folder and see the contents of the microSD card.
Enabling the Integrated GPS on the RP1300
The RP1300 comes equipped with an integrated Global Positioning System (GPS) receiver.
Using the A-GPS on the RP1300
To use A-GPS, you need to set parameter in G2W.INI which is located in Flash Disk\G2W_Setup.
Remark:
G2W_INI is not directly settable on the RP1300.
To set INI parameter, you need to synchronize the RP1300 with your PC.
On the PC, you change INI parameter.
G2W_INI is convenient setting tool to control various functions
G2W_setup manual is available for download.
To configure your GPSID settings

Tap Start > Settings > System > External GPS
RP1300 User‟s Manual
52

Tap External GPS. The GPS Settings screen appears.

GPS program port: COM2 or COM9
On the Programs tab, select the COM port that you want your programs to use to get GPS data from
your RP1300.
1.
Tap the Hardware tab, and confirm these default settings.
GPS hardware port: COM8
Baud rate: 9600
2.
Tap the Access tab and select the Manage GPS automatically heck box.
RP1300 User‟s Manual
53
3.
Tap ok.
RP1300 User‟s Manual
54
Button Assign Function

Assign Button : L-Scan key, R-Scan key, Volume, Camera key, Call key, End key,
RP1300 User‟s Manual
55

Button Assign Method
1.
Start Menu -> Settings -> Personal -> Buttons
2.
Select a button in “1. Select a button” field.
3.
In “2 Assign a program” field, select the program and press the “ok”.
※ If you assign the Virtual keyboard, select the “<Input Panel>” in the “2 Assign a program” field.
RP1300 User‟s Manual
56
Connecting and Configuring the RP1300
Use this chapter to understand how to configure the RP1300 to communicate in your network.
Connecting the RP1300 to a PC
You can use Microsoft ActiveSync to establish a connection between your RP1300 and PC. ActiveSync lets
you transfer files, synchronize files, remotely debug, and perform other device management activities.
ActiveSync is a free application available from the Microsoft web site at
www.windowsmobile.com/getstarted.
To establish an ActiveSync partnership between your RP1300 and PC, you need to physically connect your
RP1300 to your PC using these accessories:
• RP1300 AC adapter
• USB to micro-USB cable
To establish an ActiveSync partnership
1.
Download ActiveSync from the Microsoft web site and install ActiveSync on your PC. When
installation is complete, the Get Connected dialog box appears.
2.
Follow the onscreen instructions to establish a partnership. When the partnership is established, the
Microsoft ActiveSync screen appears on your PC.
RP1300 User‟s Manual
57
Connecting the RP1300 to Your Network
The RP1300 is a versatile mobile computer that you can easily add to your wireless or wired data collection
network. You can connect your RP1300 using:
• 802.11 radio communications.
• Bluetooth communications.
• USB communications.
Note: The RP1300 radios are disabled when the battery is low. Attach a charger or replace the battery to reenable the radios.
RP1300 User‟s Manual
58
Connecting the RP1300 Using WIFI Communications
Make sure all components with antennas are at least 30 cm (1 ft.) apart when power is applied.
Failure to comply could result in equipment damage.
Your RP1300 has an 802.11 radio to transfer data using wireless communications. This section assumes that
your wireless network is set up, including your access points.
To configure 802.11 radio parameters
1.
Tap Start > Settings > Connections > Wireless Manager > WI-FI status is changed to ON.
2.
Menu > Wi-Fi Settings. The Configure Wireless Networks page appears.
3.
If the Network you want to connect to is available in the wireless networks list, tap the network
name and proceed to Step 4.
If the Network you want to connect to is not in the wireless networks list:

Tap Add New.

In the Network Name field, type in the name of your network and then tap Next. The Configure
Network Authentication page appears.
4.
From the Authentication list, choose either Open, Shared, WPA, WPA-PSK, WPA2, or WPA-PSK.
• If you choose Open or Shared, Data Encryption is automatically set to WEP and the key is
automatically provided.
• If you choose WPA, Data Encryption is automatically set to TKIP.
• If you choose WPA2, Data Encryption should be set to AES.
RP1300 User‟s Manual
59
• If you choose WPA-PSK, Data Encryption is automatically set to TKIP and you need to enter a
Network key.
• If you choose WPA2-PSK, Data Encryption should be set to AES and you need to enter a
Network key.
5.
Tap Next.
6.
For EAP type, select either PEAP or Smart Card or Certificate from the list and tap Finish. You
return to the Configure Wireless Networks page.
7.
Tap Connect. The RP1300 prompts you to enter this network information:

User name

Password
8.
Tap OK. Your device connects to the network.
9.
Make sure that your RP1300 is talking to the network and that the network can see your RP1300. If
you are connected to the wireless network you will see a connected icon
in navigation bar
and you will see the name of your network next to Wi-Fi in the Wireless Manager.
Wireless LAN is optional. You can only use WLAN, When the WLAN module is built in to the
device
RP1300 User‟s Manual
60
Connecting the RP1300 Using Bluetooth Communications
You RP1300 is Bluetooth™-enabled, which lets you connect to other Bluetooth devices, such as printers.
You need to turn on the Bluetooth radio before you can discover and connect to other Bluetooth devices. By
default, the radio is turned off.
Bluetooth is optional. Device without built-in Bluetooth can not use Bluetooth service.
Bluetooth support the transmission and reception of files between the serial connecting service
and Windows Mobile device.
To turn on the Bluetooth radio
1 Tap Start > Settings >Bluetooth > the Mode tab.
2 Tap the Turn on Bluetooth checkbox.
Or Tap the Bluetooth.
Select
Tab the Bluetooth
RP1300 User‟s Manual
61
3 (Optional) If you want your RP1300 to be visible to other Bluetooth devices, tap Make this device
visible to other devices.
4 Tap ok.
The Bluetooth radio maintains its current state through a reset or hard reset and maintains virtual COM
ports. If you clean boot your RP1300, you need to recreate pairings to devices.
Configuring the Phone
The RP1300 supports two types of mobile wireless phone technology:

HSDPA

UMTS
With the radio module installed in the RP1300, you can send and receive telephone calls as well as transmit
data through wide-area (WAN) cellular networks.
The RP1300 provides a phone speaker, microphone, and speakerphone. It also supports the use of a
Bluetooth headset or hands-free kit. The factory default setting for the phone is disabled.
After you have turned on the phone and activated with the wireless carrier of your choice, you can
customize the features of the phone and network settings.
Turning On the Phone Using the Wireless Manager
You can use the Wireless Manager to enable and disable Bluetooth, Wi-Fi, and the phone on your RP1300.
To turn on the phone using the wireless manager
1 Tap Start > Settings > Connections > Wireless Manager.
2. In the Wireless Manager, tap Phone. The phone turns on.
3. Tap Done to close the Wireless Manager.
RP1300 User‟s Manual
62
Blue-Tooth that can be used simultaneously with Wi-FI
RP1300 Series Bluetooth and Wi-Fi can be used at the same time using the wireless manager.
To turn on the Blue-Tooth and Wi-fi using the wireless manager
1 Tap Start > Settings > Connections > Wireless Manager.
2. In the Wireless Manager, tap Bluetooth and Wi-fi. The Bluetooth and Wi-Fi turns on.
Wi-Fi setting see (Connecting the RP1300 Using WIFI Communications page 60)
Bluetooth setting see(Connecting the RP1300 Using Bluetooth Communications page-62)
3. Tap Done to close the Wireless Manager
Using Internet Sharing
Internet Sharing allows you to setup a connection from your laptop to your mobile phones data
connection.
From here the instructions are simple;
1.
Start the application on you mobile phone. It will probably remind you that you‟re starting the
Bluetooth radio and ask you to confirm
2.
Next go to your laptop Bluetooth devices and add the mobile device. In most cases you should
create a pin when prompted, I usually use 1234.
3.
Once you‟ve connected the Bluetooth device you need to go to the network and sharing center
and click setup a new connection
63
RP1300 User‟s Manual
RP1300 User‟s Manual
64
4.
Select setup a new connection, and all going well you should see „Connect to a Bluetooth PAN
5.
Hit connect and you should now be connected to the internet via your mobile!
RP1300 User‟s Manual
65
Making a Phone Call
After you turn on your phone, you are ready to start making phone calls. The icon in the navigation bar will
change to indicate that the radio is now active.
To make a phone call
1. Tap Start > Phone.
2. Tap the keys to enter the telephone number you want to call.
3. Tap the Talk button.
RP1300 User‟s Manual
66
Installing Applications
Use this chapter to understand the guidelines for applications for use on the RP1300.
Installing Applications on the RP1300
There are several ways you can install applications on your mobile computer:
• You can package your application as a cabinet (.cab) file.
• If you have a simple application, you may only need to deliver the .exe file.
• You can copy a directory structure that contains the application, supporting files, DLLs, images, and
data files.
Gen2wave recommends using .cab files to install your applications. The mobile computer uses standard
Windows Mobile .cab files and will install third-party .cab files. You can have your .cab files place your
application in any of these memory locations on the mobile computer:
• The Object Store.
• The optional microSD card. Depending on available disk space, you may want to consider installing
you application files on the microSD card. Using a microSD card creates the Storage Card folder on the
RP1300.
• The non-volatile Flash File Store. Applications and data in the Flash File Store will persist through a
clean boot. Since the flash in the system has a limited number of write cycles, do not use the Flash File
Store for excessive writing.
There are several ways you can install files and applications on the RP1300:
• ActiveSync
• microSD card
The following sections explain how to use each one of these processes to install your application on the
computer.
RP1300 User‟s Manual
67
Installing Applications Using Microsoft ActiveSync
You can send applications from your PC to your RP1300 using Microsoft ActiveSync. To download ActiveSync
or the Windows Mobility Center.
To install an application using Microsoft ActiveSync
1 On your PC, copy the .cab file you want to download to your RP1300.
2 Create an ActiveSync connection between your PC and RP1300. For help, see “Connecting the
RP1300 to a PC”.
3 Click Explore. The Mobile Device window opens.
4 Double-click My Windows Mobile-Based Device.
5 Navigate to the folder you want to copy the .cab file to, and paste the .cab file in the folder.
6 On your RP1300, tap Start > Programs > File Explorer and navigate to the location of the .cab file.
7 Tap the .cab file to install it.
RP1300 User‟s Manual
68
Installing Applications Using a microSD Card
You can also use a microSD card to install applications.
To install applications using the microSD card
1 Suspend the RP1300 and remove the microSD card.
2 Insert the microSD card into a microSD adapter card and then place it in the storage card reader
connected to your PC.
3 Copy your application file to the microSD card.
4 Remove the microSD card from the adapter card and insert it into the RP1300.
5 On your RP1300, navigate to the storage card folder and run your application.