INFPRV450 Owner’s Manual
*This stereo should not be washed with a pressure
washer neither should it be washed with chemicals.
A wet sponge or damp cloth will suffice.*
This product is serviced exclusively by Prospec Electronics Inc. and must be
returned to Prospec for in and out of warranty repairs. It can not be serviced
under warranty by other Infinity service centers.
Table of Contents
Table of Contents ----------------------------------------------------------------- 1
Product Description -------------------------------------------------------------- 2
Installation Instructions ---------------------------------------------------------- 3
Wiring Configuration ------------------------------------------------------------ 4
General Function of Buttons ---------------------------------------------------- 5
Sign up Display & Home Menu ------------------------------------------------ 6
General Operations --------------------------------------------------------------- 7
General Settings ------------------------------------------------------------------ 7
Radio Section Operation ------------------------------------------------------- 10
SiriusXM R Section Operation ----------------------------------------------- 12
Bluetooth Section Operation -------------------------------------------------- 16
USB Section Operation -------------------------------------------------------- 18
iPod/iPhone Operation --------------------------------------------------------- 20
AUX Section Operation -------------------------------------------------------- 21
Troubleshooting ----------------------------------------------------------------- 22
1
Product Description
Troubleshooting
This Infinity PRV450 incorporates a 3.5” TFT color screen, ready to complement
your day whether you are on the water, motorcycle, UTV trail, or farm. Following
the same footprint as the popular INFPRV250, this stereo is synonymous with
excellence. In fact, the INFPRV450 was listed as one of the top new products of
2016 by Boating Industry magazine. Check in with us often to see what the next
Prospec experience will bring!
The following information helps you self-diagnose common issues without the need for
contacting SiriusXM support.
Advisory Name
Recommended Description
Check Antenna
The radio has detected a fault with the SiriusXM antenna. The antenna
cable may be either disconnected or damaged.
Verify that the antenna cable is connected to the SiriusXM Connect
Vehicle Tuner.
Inspect the antenna cable for damage and kinks. Replace the antenna
Check Tuner
The radio is having difficulty communicating with the SiriusXM
Connect Vehicle Tuner. The tuner may be disconnected or damaged.
Verify that the SiriusXM Connect Vehicle Tuner cable is securely
connected to the radio.
No Signal
The SiriusXM Connect Vehicle Tuner is having difficulty receiving
the SiriusXM satellite signal.
Verify that your vehicle is outdoors with a clear view of the sky.
Verify that the SiriusXM magnetic mount antenna is mounted on a
metal surface on the outside of the vehicle.
Move the SiriusXM antenna away from any obstructions.
Inspect the antenna cable for damage and kinks.
Consult the SiriusXM Connect Vehicle tuner installation manual for
more information
Subscription
Updated
The radio has detected a change in your SiriusXM subscription status.
Channel Not
Available
The channel that you have requested is not a valid SiriusXM channel
or the channel that you were listening to is no longer available.
You may also see this message briefly when first connecting a new
SiriusXM Connect Vehicle tuner.
Visit www.siriusxm.com for more information about the SiriusXM
channel line up.
Channel Not
Subscribed
The channel that you have requested is not included in your SiriusXM
subscription package or the channel that you were listening to is no
longer include
The INFPRV450 incorporates the following features:
AM/FM
SiriusXM-ReadyTM (SiriusXM connect tuner and subscription required)
Bluetooth Audio Streaming with ID tagging
USB input and control-for USB drives only
Auxiliary input
3.5” color TFT screen / Waterproof faceplate
50W x 4 amplifier
Wired remote option
U.S. and European tuning
Charging through USB
3 pair of RCA output including subwoofer output
Can Bus Control via NMEA2000
The Infinity brand is part of Harman International Industries. In 1958, Harman
Kardon developed the world’s first stereo receiver and we are proud to bring
you the world’s first Infinity marine color screen receiver!
Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio
Inc. All rights reserved.
2
Channel Locked The channel that you have requested is Locked by the radio Parental
Control feature. See the description on Parental Control, page 14 for
more information on the Parental Control feature and how to access
locked channels.
23
Troubleshooting
Installation
*Note: In many respects, a stereo acts much like a computer and occasionally requires a
reboot. In the unlikely event of product malfunction, a reset can usually fix the issue.
For software reset operation, please refer to page 8.
A mounting gasket has been added inside the package for convenience. Trace along
the outside edge of the gasket thus revealing your cutout.
Mounting Illustration
Issue
Cause
Solution
No power
1. Incorrect wiring
2. Fuse is blown
3. Low battery voltage
1. Double check wiring
2. Replace fuse
3. Check voltage of vehicle battery
with multimeter. Voltage must
be at least 11V.
No Sound
1. Speaker connection
came loose
2. Bad speaker
1. Double check connections.
3. Output blown
4. Volume too low on
media device
2. Replace bad speaker with known
good speaker and connect.
3. Send unit in for repair.
4. Increase volume of media device
No Reception
1. Antenna not firmly
seated in socket
1. Insert firmly
USB stick not
reading
1. File must be a mp3
or wma file
1. Convert format to mp3 or mwa.
1. Avoid installing stereo
below cupholders!
Make sure mounting
substrate is flat to avoid
flexing of the plastic.
2. Use the back bracket and
3. To avoid possible water
studs to affix the unit. Install
ingress into wire harness
the U bracket behind the unit,
area, route the harness in
using two nuts per bolt for
the downward direction
ultra hold.
as shown above.
1
While in Bluetooth mode:
No Connection
1. You are not connect
to the “PRV”
address on your
portable media
device.
2. Out of range
3. The connection is
already in use.
22
2
1. Choose “PRV”
3
4
2. Bring portable media device closer
to the receiver. Device needs to be
within 30’.
3. Ask the person who first paired to
drop out.
6
7
5
Instructions:
1. Install jamb nuts (4) loosely on mounting
studs (3), so they will not touch mounting
brackets (5) when installed.
2. Slip mounting bracket (5) on and make
flush with mounting surface (2).
DO NOT RIGHTEN
3. Snug spring washer (6) and outer nuts (7)
against mounting plate (2).
DO NOT TIGHTEN
4. Position jamb nuts approximately 1/16”
from mounting bracket.
5. Tighten outer nuts completely.
3
Wire Configuration
AUX Section Operation
1. To Select USB mode
At Home Menu, press TUNE Up or Down to move the highlight to AUX source, then
press ENTER button to go into the AUX mode.
Note: highlight movement indicated by the icon background change.
RED
6P REMOTE
CONTROL
WHITE
(SiriusXM)
RED
(ANT JACK)
WHITE
(FRONT LINE OUT)
(REAR LINE OUT)
(CAN BUS)
RED
12P CONNECTOR
WHITE
(AUX)
(USB)
BLUE
(REM)
( ACC )
( GROUND )
( FRONT LEFT )
( REAR LEFT )
FUSE
RED
RED
BLACK
WHITE
WHITE
GRAY
WHITE/BLACK
GRAY/BLACK
GREEN
VIOLET
GREEN/BLACK
VIOLET/BLACK
(SUBWOOFER)
(FRONT RIGHT )
( REAR RIGHT )
The use of auxiliary mode allows you to play
the portable music device through the
headphone jack.
Note: An additional accessory/adaptor must be
purchased in order for this to happen.
Prospec's part, SEAMINI2 or
SEAUSBMINI36 fulfills this option.
NOTE:
1. When wiring, the red lead is recommended to be wired to ACC/ignition power lead.
2. Make sure that the black wire on the wiring harness is connected to a good ground point
on the boat. If the chassis f the boat is used as a ground point, make sure that the surface
is scraped clean of paint before attaching the wire to it. It is recommended to connect the
black ground wire directly to negative terminal (-) of the boat battery.
3. Before wiring your system, disconnect your boat battery’s positive (+) cable. This helps
prevent damage in case of a short.
4
21
General Function of Buttons
iPod/iPhone Operation
1. Connect
Connect an iPod/iPhone to the USB socket, it will read the files automatically. The track
information displays on the screen once playback starts.
Only display when EQ / LOUD ON
was selected in the Settings.
1
MENU
ENTER
2
3
5
4
6
Track No.
ID3 tag:
Song name
Artist
Album
Play mode
Play/Pause
Track elapse time
RPT: Track Repeat play
RDM: Track Random play
2. Play/Pause Play
While iPod/iPhone playing, simply press the PAUSE button to pause the playback, and
press it again to resume playback.
Note:
refers to PLAY;
refers to PAUSE.
3. Track Up/Down
While iPod/iPhone playing, simply press TUNE Up or Down button to select the next or
previous track.
3. Track Repeat play
While iPod/iPhone playing, simply press MENU button to activate navigation, it will
highlight at RPT, then press MENU button to toggle select Track Repeat or RPT OFF.
(Note:
Refers to play current track repeatedly.)
4. Random play
While iPod/iPhone playing, simply press MENU button to activate navigation, then press
TUNE Down button to move highlight to RDM, then press MENU button to toggle
select Track Random or RDM OFF.
(Note:
Refers to play all the tracks in a random sequence.)
Note: Please make sure the iPod/iPhone cable is connected correctly.
And it is recommended to use the original cable for connection.
20
1. POWER, MUTE, PAUSE button
- With unit off, press to power the unit on.
- With the unit on, press and hold for over 2s to power the unit off.
- In Radio, SiriusXM, AUX mode, press to MUTE sound output,
press again to resume sound output.
- In USB, BT Music mode, press to PAUSE playback, press again
to resume playback.
2. MENU, ENTER button
- In any status, press and hold for 2s to navigate to home display.
- In source playing status, quick press to activate the bottom navigation function.
(Note: Bottom navigation function is disabled after 5s without operation.)
- In any selection status, press ENTER to confirm selection.
3. VOLUME Up button
- Simply press it to increase volume level.
4. VOLUME Down button
- Simply press it to decrease volume level.
5. Tune Up button
- In playing status, press to select the next station, channel, or track.
- In bottom navigation mode, press to move highlight upward/over.
6. Tune Down button
- In playing status, press to select the previous station, channel, or track.
- In bottom navigation mode, press to move highlight downward/over.
5
Sign Up Display & Home Menu
USB Section Operation
1. Sign Up Display
Once the unit powered on, the introductory home screen appears for 4 seconds, then
switches to the last played mode before power off occurred.
4. Track Up/Down
While USB playing, simply press TUNE Up or Down button to select the next or previous
track. To fast forward or rewind, press and hold TUNE button.
5. Scan Play
While USB playing, simply press MENU button to activate navigation, it will highlight
at SCAN, now repeat press MENU button to toggle select Track Scan, Directory Scan, or
SCAN OFF. (Note: The play mode icon would change simultaneously.)
Refers to play the first 10s of all the tracks in the USB device.
Push
Refers to play the first 10s of all the tracks in current Directory.
Refers to play all the tracks in normal sequence.
6. Repeat play
While USB playing, simply press MENU button to activate navigation, then press TUNE
Down button to move highlight to RPT, repeat press MENU button to toggle select Track
Repeat, Directory Repeat, or RPT OFF. (Note: The play mode icon would change
simultaneously.)
Refers toplay current track repeatedly.
2. Home Menu (Source display)
At Home Menu, press the TUNE Up/Down button to move to desired source and press
ENTER button to confirm.
Radio
SiriusXM
BT Music
Refers to play the tracks in current Directory repeatedly.
Refers to play all the tracks in normal sequence.
7. Random play
While USB playing, simply press MENU button to activate navigation, then press TUNE
Down button to move highlight to RDM, repeat press MENU button to toggle select
Track Random, Directory Random, or RDM OFF. (Note: The play mode icon would
change simultaneously.)
Refers to play all the tracks in a random sequence.
Refers to play the tracks in current Directory in a random sequence.
Refers to play all the tracks in normal sequence.
USB
AUX IN
Settings
Note: icon background changes to two toned burnt orange
when selected. For example, Radio mode is the selected
mode in above picture.
6
8. F.LIST (Folder / File Search)
While USB playing, simply press MENU button to
activate navigation, then press TUNE Down button
to move highlight to F.LIST, press ENTER button
to go inside the F.List.
In F.List, press TUNE Up or Down button to choose
desired Folder, press ENTER to display sub-directory
or files inside, press TUNE Up or Down button to
choose desired file and press ENTER button to play it.
19
USB Section Operation
General Operations
1. To Select USB mode
At Home Menu, press TUNE button to move the highlight to USB source, then press
ENTER button to go into the USB mode.
Note: This input is dsigned to read and play USB drives (mp3 and wam files), not media/
phones.
You can charge most phones through the USB input. Music, however, needs to be
played back by using eigher BT or Aux input.
1. VOLUME Control
In any mode, press VOL UP/DN button to
adjust volume level.
Press and hold VOL button to adjust volume
level rapidly.
2. MUTE Control
In Radio, SiriusXM, or AUX mode, press
MUTE button to mute sound output; press
again to resume sound output.
2. USB Screen Description
Only displays when EQ / LOUD ON
was selected in the Settings.
3. General Settings
Press and hold MENU button to go back to
Home Menu, then press TUNE UP/DN button
to move highlight to Settings source. Then
press ENTER button to go into the Settings
mode.
Track No.
ID3 tag:
Song name
Artist
Album
3-1. Bass Control
In Settings screen, press TUNE Up or Down button
to select Bass, then press VOL Up or Down button
to adjust Bass level.
Play/Pause
Play mode
Track elapse time
SCAN: Intro Scan play (Track / Directory Scan play)
RPT: Repeat play (Track / Directory Repeat play)
RDM: Random play (Track / Directory Random play)
F.List: To display the Directory / File List
3-2. Treble Control
In Settings screen, press TUNE Up or Down button
to select Treble, then press VOL Up or Down button
to adjust Treble level.
3. Play/Pause Play
While USB is playing, press the PAUSE button to pause the playback, and press
again to resume playback.
Note:
18
refers to PLAY;
refers to PAUSE.
7
General Settings
Bluetooth Section Operation
3-3. Balance Control
In Settings screen, press TUNE Up or Down button
to select Balance, then press VOL Up or Down button
to adjust Balance level.
4. Play/Pause Play
Once the BT device being paired is successful, music will begin to play.
Note: For some Bluetooth enabled phones, you might activate play from your phone first.
It depends on the phone itself.
While BT Music playing, press the PAUSE button to pause the playback, and press it
again to resume playback.
Note:
refers to PLAY;
refers to PAUSE.
3-4. Fader Control
In Settings screen, press TUNE Up or Down button
to select Fader, then press VOL Up or Down button
to adjust Fader level.
5. Track Up/Down
While BT Music is playing, press TUNE Up or Down button to select the next or
previous track.
3-5. Loud Control
In Settings screen, press TUNE Up or Down button to
select Loud, then press VOL Up or Down button to
select ON or OFF.
6. Disconnect
In BT Music playing mode, in order to disconnect the BT device, press MENU button
to activate bottom navigation, it will highlight at DISCONN, press ENTER button to
disconnect the BT connection.
Note: When your BT device battery is at low charge, the Bluetooth connection may
occasionally be lost. To maintain good connectivity ensure that your BT device battery
is adequately charged.
3-6. EQ Selection
In Settings screen, press TUNE Up or Down button to
select EQ, then press VOL Up or Down button to select
Off, Classics, Jazz, Pop or Rock.
7. Connect
With BT device paired OK, but disconnected, if you want to reestablish the BT connection,
press MENU button to activate bottom navigation, it will highlight at CONNE. Press
ENTER button to connect the BT device.
Note: With the Bluetooth connection disconnected, once you power on the unit next time,
it will establish the Bluetooth connection automatically.
3-7. Subwoofer Gain Control
At Setting screen, press TUNE Up or Down button to
select Subwoffer, then press VOL Up or Down button
o adjust Subwoofer Gain level.
3-8. I-Volume Control
At Setting screen, press TUNE Up or Down button to
select I-Volume, then press VOL Up or Down button
to adjust the Initial Volume Level. This feature controls
the maximum volume level desired when powered on.
8
17
对折基准线
Bluetooth Section Operation
General Settings
1. To Select Bluetooth mode
At Home Menu, press TUNE button to move the highlight to Bluetooth source, then simply
press ENTER button to go into the Bluetooth mode.
Note: highlight movement indicated by the icon background change.
3-9. Brightness Adjustment
In Settings screen, press TUNE Up or Down button to
select Brightness, then press VOL Up or Down button
to adjust Brightness level.
3-10. Area Selection
In Settings screen, press TUNE Up or Down button to
select Area, then press VOL Up or Down button to
select USA or EUR.
3-11. SiriusXM Parental Lock - Change Code
In Settings screen, press TUNE Up or Down button to
select Parental Lock. Then press VOL Up or Down
button to select Parental Lock sub-features.
Please refer to SiriusXM Section Operation for details.
2. Bluetooth Screen Description
Only displays when EQ / LOUD ON
was selected in the Settings.
BT icon
3-12. SXM Reset
At Setting screen, press TUNE Up or Down button to
select SXM Reset, then ENTER button to reset the
SXM Tuner.
ID3 tag:
Song name
Artist
Album
If already has BT device
connected, here display
DISCON.
If no BT device connect,
here display CONN.
Play/Pause
Paired device name.
CONN: To establish Bluetooth connection.
DISCON: To disconnect the BT Device.
3. Pair BT Device
If there is no BT device paired, go to settings on the BT device and turn the Bluetooth
option ON. Pick “PRV” option on your Bluetooth enabled device.
(if you are prompted for a password, the code entered will be “1234”.)
If there was previously a BT device paired, simply press MENU button to highlight
CONN and press ENTER to establish the BT connection.
16
3-13. Software Version View, Software Reset
At Setting screen, press TUNE Up or Down button to
select S/W Version, then press MENU button to active
highlight at VIEW and press ENTER button to view
the Software Version.
Software Reset:
In Software Version display status, press TUNE UP,
TUNE DN, and TUNE UP in sequence, then press
and hold TUNE DN for 7s to reset the unit.
Note: It will be necessary to re-enter the radio preset
memories and other personal settings as these
will have been erased when the software was
reset. After resetting the unit, ensure all
functions are operating correctly.
9
Radio Section Operation
SiriusXM Section Operation
1. To Select Radio mode
At Home Menu, press TUNE Up/Down button to move the highlight to Radio source, then
press ENTER button to go into the Radio mode.
Note: highlight movement indicated by the icon background change to two tone orange.
11. Channel Parental Lock
The Parental Control feature allows you to limit access
to any SiriusXM channels, including those with mature
content. When enabled, the Parental Control feature
requires you to enter a passcode to tune to the locked
channels.
To Lock / Unlock any Channel, first go back to Home
Menu and select Settings. Press TUNE button to choose
Parental Lock.
- Parental Lock On / Off
Press VOL UP/DN button to move highlight to Off,
then press ENTER, it will prompt for passcode, input
four digits with VOL button and after each input press
ENTER button to jump to next input. After four digit
input, it will indicate “Lock is ON”.
With Parental Lock On selected, all the locked
channels are temporarily unlocked which will let you
listen to the locked channels without inputting the
passcode again.
Note: Once you leave SiriusXM mode or power off
the unit, it will revert to Parental Lock Off.
2. Radio Screen Description
Displays EUR or USA to indicate
the Area selected in the Settings.
Only displays in Manual
Tune status.
Only displays when EQ / LOUD
ON was selected in the Settings.
Only shows when
the station is a
Stereo Channel.
Only displays when
the station is a preset
station.
Displays FM, AM.
Frequency Bar
Frequency Mark
SAVE: To save current frequency into P.List
BAND: To select FM, AM
P.LIST: Global Preset List
10
- To Unlock all channels
Press VOL UP/DN button to move highlight to ALL,
then press ENTER, it will prompt for passcode, input
four digits with VOL button and after each input press
ENTER button to jump to next input. After four digit
input, press ENTER button to unlock all channels.
- To Lock/Unlock channels one by one
Press VOL UP/DN button to move highlight to CH,
then press ENTER, it will prompt for passcode,
input four digit passcode, press ENTER button. It
will display the Channel list, press TUNE UP/DN
button and press MENU at the desired channel.
Note: if the selected channel was locked, then
pressing MENU button will unlock it; and if
the selected channel was unlocked, pressing
MENU button will lock it.
12. SiriusXM Parental Lock Code Change
If you want to change your code, first go back to
Home Menu and select Settings. Press TUNE UP
button to choose Parental Lock. Press VOL button to
choose CODE CHANGE. It will prompt for current
passcode, then new code, and one more prompt for new code confirmation.
Use VOL button for code input, and press ENTER button after each input.
If a wrong digit is inputted, press TUNE DN button to move to previous digit input.
Note: Factory default passcode was 0000.
15
SiriusXM Section Operation
Radio Section Operation
8. Direct Channel Input
In SiriusXM mode, first press MENU button to
activate navigation, then press TUNE Down button
to move highlight at DIRECT, and press ENTER
button. It will display the keyboard. Press VOL Up
or Down button to select the desired digit, then press
ENTER after each selection to move to next input.
After three digit input, simply press ENTER button
again to jump to the selected Channel.
Note: If a wrong digit is inputted, simply press TUNE
DN button to move to previous digit input. Repeat
above operation until the correct channel is inputted.
3. AREA Selection
At Home Menu, move highlight to Settings, press ENTER button, then press TUNE Down
button to move highlight to AREA feature, press VOL Up or Down button to select between
USA and EUR.
9. Category List
In SiriusXM mode, first press MENU button to
activate navigation, then press TUNE Down button
to move highlight to Cat.LIST and to display the
Category List. Press TUNE Up or Down button to
select and press ENTER button at your desired
Category. Then press TUNE Up or Down and ENTER
button to select a desired channel.
10. Preset List Channel Tuning
In SiriusXM play mode, press MENU button to
activate navigation, press TUNE UP/DN button
to move highlight to P.List, then press ENTER
button to display the Global Preset List.
Simply press TUNE Up or Down button to select
a desired preset and press ENTER button to listen
to it. It will let you listen to the selected channel for
10s before it reverts back to source playing screen.
During this time, you can select another channel
with TUNE UP/DN button.
4. BAND Selection
In Radio playing mode, press MENU button to activate navigation, then press TUNE Down
button to move highlight to BAND. Now press MENU button to toggle and select between
FM or AM band.
5. Auto Tuning
In Radio playing mode, press TUNE Up/Down button to activate auto tune. This results in
automatically stopping at next station of sufficient signal strength.
6. Manual Tuning
In Radio playing mode, long press TUNE Up/Down button for 2s. This will activate manual
tune with MANU display on the top area. Then repeatedly press TUNE Up/Down button
to tune frequency by steps.
NOTE: Radio will revert back to AUTO tune mode after 5s without operation.
7. Station Save
In Radio play mode, manually or auto tune to a station, then press MENU button to activate
bottom navigation. Select SAVE icon and press ENTER button. The unit will display the
Global Preset List screen, press TUNE UP/DN button to select a preset No. and press
ENTER button to save current station into Preset List. The Preset number will display
once the station is saved. The unit will go back to previous display if no operation in 5s.
8. Preset List
In Radio play mode, press MENU button to activate navigation, press TUNE UP/DN button
to move highlight to P.List, then press ENTER button to display the Global Preset List.
Press TUNE Up or Down button to select a
preset and press ENTER button to listen to it.
This will let you preview the selected station
for 10s before it reverts back to Radio screen.
During this time, you can select another
station with TUNE UP/DN button.
NOTE:
1. Receiver can store up to 18 stations.
2. If there is no operation at Global Preset
List screen, it will go back to Radio
screen by itself after 5s or simply long
press MENU button for 2s to go back
to previous display.
14
11
SiriusXM Section Operation
SiriusXM Section Operation
1. What is SiriusXM
Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over
140 channels, including commercial-free music plus the best sports, news, talk, comedy and
entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required.
3. SiriusXM Screen Description
Activating your SiriusXM Subscription
1. After installing your SiriusXM Connect Tuner and antenna, power on your radio and select
SiriusXM mode. You should be able to hear the SiriusXM preview channel on Channel 1.
If you cannot hear the preview channels, please check the installation instructions to make
sure your SiriusXM Connect tuner is properly installed.
For more information on how to install the SiriusXM Connect Vehicle tuner, consult the
installation guide included with the tuner.
2. After you can hear the Preview channel, tune to Channel 0 to find the Radio ID of your tuner.
In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner
and its packaging. You will need this number to activate your subscription. Write the number
down for reference.
Note: the SiriusXM Radio ID does not include the letters I, O, S or F.
SiriusXM signal
Only displays when EQ / LOUD ON
was selected in the Settings.
Only displays when the
listening channel is a
preset channel.
Display sequence:
Channel Number
Channel Name
Category Name
Artist Name
Song Title
Content Info.
SAVE: To save current channel into P.List.
DIRECT: To directly input a channel No.
Cat.List: To display the Category List.
P.LIST: To display the Global Preset List.
4. To Display Radio ID
Tune to Channel 0 or direct Tune to Channel 0 to display the Radio ID.
5. MUTE
In SiriusXM mode, press the MUTE button to mute sound output, and press it again
to resume sound output.
As part of the activation process, the SiriusXM satellites will send an activation message to
your tuner. When your radio detects that the tuner has received the activation message, your
radio will display:Subscription Updated, press Enter to continue. Once subscribed, you can
tune to channels in your subscription plan. Note, the activation process usually takes 10 to
15 minutes, but may take up to an hour. Your radio will need to be powered on and receiving
the SiriusXM signal to receive the activation message.
2. To Select SiriusXM Mode
At Home Menu, press TUNE button to move
the highlight to SiriusXM source, then press
ENTER button to go into the SiriusXM mode.
Note: highlight movement indicated by the
icon background change.
12
6. To Select the Previous / Next Channel
In SiriusXM mode, press TUNE Up or Down button to select the previous or next
channel. Press and hold TUNE Up or Down button to rapid tune/browse channels,
and release the button when the desired channel is displayed..
7. Storing a Channel as a Preset
In SiriusXM playing mode, tune to or direct tune to a channel which you want to store
as a preset, then press MENU button to activate bottom navigation. It will highlight at
SAVE, now press ENTER button. It will display the Global Preset List screen, press
TUNE UP/DN button to select a preset number and press ENTER button to save current
channel into Preset List. The Preset No. will display once the channel is saved. The unit
will revert back to the previous display if no operation is performed in 5s.
13
Download PDF