Data sheet eddyNCDT 3010 - Micro

More Precision
eddyNCDT // Eddy current sensors for displacement and position
10
Compact eddy current sensor system
eddyNCDT 3010
- High accuracy and temperature stability
- Active temperature compensation
- Bandwidth 25kHz (-3dB)
- For integration in harsh, industrial
environments
-M
ulti-channel applications by
synchronisation
System structure
The eddyNCDT 3010 is a compact, singlechannel system consisting of an eddy current sensor, a sensor connecting cable and
an amplifier electronics (signal conditioning
unit). The sensors are factory-calibrated for
aluminium (non-ferromagnetic) or steel St37
(ferromagnetic). Using three-point linearisation, the user can also compensate on site for
other materials.
Temperature compensation
The eddyNCDT 3010 series is suitable in a wide
temperature range. In the case of fluctuating
ambient temperatures a stable output signal is
very important for reliable measurements. Due
to a patented temperature compensation method the eddyNCDT series 3010 offers a unique
thermal stability, which no other system can
offer.
The eddyNCDT 3010 is designed for industrial
use in production plants, for machine control
and for measuring and testing during in-process quality assurance.
Synchronisation
If several channels of series 3010 operate simultaneously close to one another, a mutual
interference is possible because of slight differences in the oscillator frequencies.
This can be avoided by synchronisation. Two
SMC connectors at the electronic box, one for
oscillator signal output (sync out) and one for
input (sync in) are standard equipment. The
electronics operate independently as long as
they are not interconnected. lf connected together, they automatically switch to synchronised operation and are controlled by the first
electronics (master). Any quantity of units can
be synchronised by serial connection.
Controller
DT3010
in sync out
Controller
DT3010
in sync out
SC30 – synchronization cable (accessory)
Controller
DT3010
in sync out
11
Controller
Material
Linearity
DT3010-A
DT3010-M
non-ferromagnetic target
ferromagnetic target
≤±0.25% FSO
0.005% FSO
Resolution 1)
Repeatability
0.01% FSO
Bandwidth
25kHz (-3dB)
Temperature compensation range
standard: 10 to 65°C optional 0 to 90°C
operation: 10 to 50°C
Temperature range controller
storage: -25 to 75°C
Temperature stability controller (MMR)
≤0.05 % FSO/ °C
Output
0 ... 10V / 10mA and 4 ... 20mA
Power supply
24 VDC (9 ... 30V) / 205mA
Electromagnetic compatibility (EMC)
acc. EN 50081-2 / EN 50082-2
Synchronisation
with cable SC 30 (accessory)
Protection class
controller
IP 54
FSO = of full scale output
MMR = midrange
1)
static resolution at midrange
Housing DT3010
54
150
sensor
OUTPUT/POWER
Mounting holes
for M4 screws
38
64
138
sync in
sync out
Sensors
eddyNCDT 3010
4
ø4
M3x0.35
M5x0.8
M12x1
WS 8
WS 13
13
20
Connector side
ø12
ø8
M8x1
18
ø2
4
Measurement direction
20
12
ø4
WS 10
3m±0.45m
ø8.9
20
20
16
ø8.9
ø4.6
16
ø4.6
3m ±0.45m integrated cable
0.25m ±0.03m
ø2
Sensor type
WS 19
ø3
ø3
Design
12
ø4
8
ø2.5
10
WS 5.5
U05(09)
U1
S1
S2
unshielded
unshielded
shielded
shielded
Measuring range
0.5mm
1mm
1mm
2mm
Offset distance
0.05mm
0.1mm
0.1mm
0.2mm
≤±1.25µm
≤±2.5µm
≤±2.5µm
≤±5µm
Resolution
0.025µm
0.05µm
0.05µm
0.1µm
Repeatability
0.05µm
0.1µm
0.1µm
0.2µm
≤±0.5µm/°C
Linearity
≤±0.125µm/°C
≤±0.25µm/°C
≤±0.25µm/°C
Integrated cable/ length
Temperature stability (MMR)
0.25m
3m
3m
-
Temperature sensor cable
180°C
180°C
180°C
-
stainless steel and ceramic
stainless steel and plastic
stainless steel and plastic
stainless steel and plastic
Housing material
MMR = midrange
Sensor
Ø3
Controller
Ø4.6
Ø8.9
Connecting cable C3; C6 for sensors U05, S2, U3, U6, U15
16
C3: 3m ±15%
C6: 6m ±15%
Sensor
20
20
16
15
Ø3
Controller
Ø4.6
Ø8.9
Connecting cable C3/90; C6/90 for sensors U05, S2, U3, U6, U15
C3/90: 3m ±15%
C6/90: 6m ±15%
open ends
for transition board
nsor
Ø3
Ø4.6
ntroller
Ø8.9
Connecting cable Cx/1
13
ø14
ø4.2
3 mounting holes
on bolt circle ø 20
25
20
M18x1
12
6
M12x1
Connector side
ø37
6
ø9
Measurement direction
WS 19
WS 10
WS 27
WS 16
Sensor
Ø3
Controller
Ø4.6
Ø8.9
Connecting cable C3; C6 for sensors U05, S2, U3, U6, U15
Design
20
U3
16
C3: 3m ±15%
unshielded
C6: 6m ±15%
Measuring range
Offset distance
Linearity
3mm
6mm
15mm
0.6mm
1.5mm
≤±7.5µm
≤±15µm
≤±37.5µm
0.15µm
0.3µm
0.75µm
0.3µm
0.6µm
≤±0.75µm/°C
≤±1.5µm/°C
≤±3.75 µm/°C
-
-
-
C3/90: 3m ±15% C6/90: 6m ±15%
-
-
stainless steel and plastic
epoxy
Integrated cable/ length
20 sensor cable16
Temperature
Housing material
1.5µm
15
Temperature stability (MMR)
Ø3
Ø4.6
Ø8.9
Controller
Repeatability
U15
unshielded
0.3mm
Connecting cable C3/90; C6/90 for sensors U05, S2, U3, U6, U15
Resolution
U6
unshielded
Sensor
Sensor type
stainless steel and plastic
MMR = midrange
open ends
for transition board
sensor
Ø3
Controller
Ø4.6
Ø8.9
Connecting cable Cx/1
20
16
C3/1: 3m ±15%
C6/1: 6m ±15%
Cable Cx / Cx1 / Cx/90 Cable design
Sheath material
Temperature resistance
Outer diameter
Bending radius
Suitable for use with robots
coaxial with sheath wire
FEP/Flour-Thermoplast
-50°C to +200°C
2.95mm ±0.05mm
one-time bending during installation: 2 x cable diameter
minimum bending radius for movement: 5 x cable diameter
optimum bending radius at continuous movement: 10 x cable diameter
no
Plug
Type
Locking method
Protection class
Temperature resistance
Material housing
Mechanical service life
Sensor side/Controller side
female connector, coaxial, SMC
screw
no details
-65 to +165°C
brass nickel-plated
> 500 mating cycles
33
Accessories
eddyNCDT
3001
eddyNCDT
3005
eddyNCDT
3010
eddyNCDT
3100
eddyNCDT
3300
Articel
Description
PC3/8
Power- and output cable, 3m, 8 pin
PC5/5
Power- and signal cable
SC30
Synchronisation cable, 30cm
•
CSP 301
Digital signal processing and display unit up to 2 channels
•
PC3100-3/6/BNC
Outputcable and supply unit, 3m
•
PS2020
Power Supply 24V / 2.5A; Input 100-240 VAC; Output 24 VDC / 2.5A; DIN
rail mounting; 35mm x 7.5mm, DIN 50022
•
•
MC2.5
Micrometer calibration fixture, range 0 to 2.5 mm, division 1 μm, for
sensors EPU05 to EPS2, adjustable offset (zero)
•
•
•
MC25D
Micrometer calibration fixture, range 0 to 25mm, division 1 μm, for sensors
EPU05 to EPU15, adjustable offset (zero)
•
•
•
ECx
Sensor cable, length selectable up to 15m
•
ECx/90
Sensor cable with 90° connector (sensor-sided)
length selectable up to 15m
•
ECx/1
Extension cable for solder connection
•
ECx/2
Extension cable for plug connection
•
SCA3/5
Signal cable analogue, 3m
•
SCA3/5/BNC
Signal cable analogue with BNC connector, 3m
•
SCD3/8
Signal cable digital (switch input/outout), 3m
(also for supply 11 - 32VDC); for DT3301
•
SIC3(07)
Signal cable with BNC connector
for direct operation with oscilloscope
•
PSC30
Power / Synchronisation cable, 0.3m, for DT3300
•
ESC30
Synchronisation cable, 0.3m, for DT3301
•
PS300/12/5
Power supply Input 100 - 240VAC; Output ±12VDC / 5.2VDC integrated
cable 1.5m; for max. 4x DT3300
•
MBC300
Mounting base for controller DT330x,
fixing through M4 threaded holes 166x108x60mm
•
MCT304-SM
Tower for max. 4 controller DT 3300; supply 100 - 240VAC
•
MCT304(01)
Tower for max. 4 controller DT 3301; supply 11 - 32VDC
•
•
•
•
Modifications reserved / Y9761509-B051107GKE
High performance sensors made by Micro-Epsilon
Sensors and systems for displacement
and position
Sensors and measurement devices for
non-contact temperature measurement
2D/3D profile sensors (laser scanner)
Optical micrometers, fibre
optic sensors and fibre optics
Colour recognition sensors, LED analyzers
and colour online spectrometer
Measurement and inspection systems
MICRO-EPSILON Headquarters
Koenigbacher Str. 15 ∙ 94496 Ortenburg / Germany
Tel. +49 (0) 8542 / 168-0 ∙ Fax +49 (0) 8542 / 168-90
info@micro-epsilon.com ∙ www.micro-epsilon.com
MICRO-EPSILON UK Ltd.
No.1 Shorelines Building · Shore Road · Birkenhead · CH41 1AU
Phone +44 (0) 151 355 6070 · Fax +44 (0) 151 355 6075
info@micro-epsilon.co.uk · www.micro-epsilon.co.uk
Download PDF

advertising