Features, Operation and Maintenance Audiovox ACAM350 Backup Monitor Features: • 3.5” TFT color LCD display • Flexible mounting pad with 3M tape monitor mounts on either vehicle windshield or dashboard • Rearview camera input • Automatically displays backup camera image when vehicle is in reverse Operation: The monitor will automatically display the rear observation camera image whenever the vehicle is engaged in reverse. Maintenance: Though your Monitor requires little care, you can still maintain its condition and performance following the procedures below. • Keep your system away from excessive moisture, extreme heat or cold and magnetic fields. • Keep liquids away from the display monitor. • To avoid damage, do not place auxiliary devices or other objects on the top of the monitor. • Occasionally clean the surface of the monitor with soft cloth moistened with water or window cleaner. Troubleshooting the Audiovox ACAM350 Backup Monitor What do I do if no video signal appears while reversing the vehicle on the Audiovox ACAM350? What do I do if video image is not sharp enough on the Audiovox ACAM350? What do I do if the Monitor is not on after the vehicle is started and vehicle is in reverse on the Audiovox ACAM350? What do I do if the monitor is very dark or the image changes slowly on the Audiovox ACAM350? • Check the rear view camera lens and clean if needed. • Check the rear view camera wiring and connection. • Clean the camera lens • Check the monitor and the receiver wiring and connection. • In extreme cold or hot conditions the LCD screen may react slowly. This is normal and will clear as the vehicle warms or cools to a normal temperature.