Instruments
INSTRUMENTS
DIGITAL MULTIMETERS
- Selection Guide.................................................................................................... 10-11
- Multimeters.......................................................................................................... 12-18
- Accessories................................................................................................................ 19
CLAMP METERS
- Selection Guide.................................................................................................... 20-21
- Clamp Meters....................................................................................................... 22-29
EARTH RESISTANCE TESTERS
- Selection Guide......................................................................................................... 30
- Earth Resistance Testers........................................................................................ 31-32
- Compliance Kits......................................................................................................... 33
INSULATION TESTERS
- Selection Guide.................................................................................................... 34-35
- Insulation Testers.................................................................................................. 36-40
- PSC Loop Testers........................................................................................................ 41
- ELCB/Polarity/Phase Rotation Testers..................................................................... 42-47
- Miscellaneous and Voltage Testers........................................................................ 47-51
- Surge Protection........................................................................................................ 48
COMPLIANCE TESTERS
- Selection Guide......................................................................................................... 52
- Compliance Testers.................................................................................................... 53
POWER ANALYSERS
- Selection Guide......................................................................................................... 54
- Power Analysers........................................................................................................ 55
- Accessories................................................................................................................ 56
PHOTOVOLTAIC INSTRUMENTS
- Selection Guide.................................................................................................... 57-58
- Solutions for Performance and Troubleshooting......................................................... 58
- Selection Guide - Accessories................................................................................ 59-60
- Photovoltaic Instruments....................................................................................... 61-62
- Calibrators................................................................................................................. 63
- Test Leads............................................................................................................. 64-66
- Cable Avoidance Detectors........................................................................................ 67
- Cable Route Tracers................................................................................................... 68
- High Voltage Testers............................................................................................. 69-72
- Automotive Testers............................................................................................... 73-74
- Tachometer testers..................................................................................................... 75
- Digital Timers........................................................................................................ 76-77
THERMOMETERS
- Selection Guide......................................................................................................... 78
- Selection Guide - Temperature Probe (Type K) ........................................................... 78
- Thermometers...................................................................................................... 79-82
- Environmental Testers................................................................................................ 79
THERMAL IMAGERS
- Selection Guide......................................................................................................... 83
- Thermal Imagers................................................................................................... 84-85
1.0
1.0
Instruments
Certificate of Compliance Test Instruments Selection Guide
MACROG3
T1105
T1120
T1125
T1132
T1151
T1800
T1805
T1820
T1825
T1832
T1851
T2000
PAGE NO.
53
32
32
41
36
37
36
31
32
41
36
37
29
Continuity of bonding
•
•
•
•
•
•
Resistance of earth continuity
conductor
•
•
•
•
•
•
Continuity of ring circuits
(if applicable)
•
•
•
•
•
•
Earth loop impedance test:
at main switch
•
•
•
Prospective short-circuit
current at point of control
(PSCC) for sub-distribution
boards
•
•
•
Elevated voltage between
incoming neutral and external
earth
•
•+
Earth resistance
at electrode (if required)
•
Insulation resistance
•
Voltage at main distribution
board with no load for each
phase to neutral •
Voltage at main distribution
board with load (as calculated
for full load) for each phase
•
Voltage at available load
(worst condition as calculated
for full load) for each phase
to neutral
•
Operation of earth leakage
units
•
Polarity of points of
consumption
•
Phase rotation at points of
consumption for three-phase
systems
•
All switching devices, makeand-break circuits
•
INSTRUMENT
•
•+
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+ Indication only
NOTE:
Testing of operation of earth leakage test button, no instrument is required.
The above is only a guide as many other instruments can be used.
•
•
Instruments
1.0
Certificate of Compliance Test Instruments Selection Guide
T2000
•
T416
T419
T60
T70
T860
T890
TBM
076
TBM
079
TBM
252
TBM
3030
TBM
811
TBM
878
TEL11
TEL28
TEL
2SC
TEL1
TLB
31
53
53
47
46
45
23
27
14
22
16
18
44
42
42
44
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•+
•+
•+
•+
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Instruments
1.0
Digital Multimeters - Selection Guide
FEATURES
PAGE
LCD Display (Counts)
LCD Display (Digits)
T820
T835
T1300H
T235H
T48
TBM805
TBM807
TBM869
TBM252
12
12
12
13
13
13
14
14
14
1999
1999
1999
1999
1999
4000
4000
5000 000
6000
31/2
31/2
31/2
31/2
31/2
33/4
35/6
54/5
35/6
•
•
TRUE RMS
•
Transistor HFE
•
•
Logic
•
•
Max AC Voltage (V)
600
500
500
750
750
1000
1000
1000
1000
Max DC Voltage (V)
600
500
500
1000
1000
1000
1000
1000
1000
20
20
10
10
10
8
Max DC Current (A)
10
10
10
20
20
10
10
10
8
Max Resistance (Ω)
20M
20M
200M
200M
200M
40M
40M
60M
60M
Continuity Beeper
•
•
•
•
•
•
•
•
•
Diode Test
•
•
•
•
•
Max AC Current (A)
•
•
•
•
•
•
•
•
200K
1M
1M
1M
1M
200µ
200µ
3000µ
3000µ
25m
3000µ
1000
1000
300
1000
1000
MAX
MAX
•
•
•
•
•
•
•
•
Auto Range
Frequency (Hz)
Capacitance (F)
Temperature (ºC)
1000
Min/Max DISPLAY
Data Hold
•
•
•
Crest (Peakhold)
•
Backlight
•
•
•
•
•
•
•
•
•
6.5
6.5
12
6.0
•
•
•
•
•
•
•
•
•
•
•
•
Splash and Dust Proof
Transient Proof (kV)
Relative Reference
Bargraph
Auto Power Off (APO)
•
USB Interface
Data Logger
EF Detect
Safety Category
•
CAT III
600V
CAT III
600V
CAT III
600V
CAT II
CAT IV
1000V
600V
CAT II
CAT IV
1000V
600V
CAT II
CAT III
1000V
600V
CAT II
CAT III
1000V
600V
CAT IV
1000V
CAT II
1000V
CAT III
600V
CAT IV
300V
Intrinsically Safe
Dual DISPLAY
Fuse: mA Rating
Fuse Size (mm)
•
250mA 250V
250mA 250V
250mA 250V
250mA 250V
5 x 20
5 x 20
5 x 20
5 x 20
250mA 250V
44mA 1000V
630mA 500V
5 x 20
10 x 37
6 x 32
Fuse: A Rating
12A 250V
11A 1000V
10A 600V
Fuse: Size (mm)
5 x 20
10 x 37
10 x 37
Lifetime Warranty
*
LIFETIME WARRANTY
10
6 x 25
6 x 25
Instruments
1.0
Digital Multimeters - Selection Guide
TBM239R
TBM829*
TBM525
TBM811*
TBM812*
TBM811XEX*
TBM812XEX*
TBM319
TBM878
T8209
15
15
15
16
16
17
17
18
18
18
6000
6000
10 000
6000
6000
6000
10 000
6000
6000
3999
35/6
39/10
39/10
39/10
39/10
39/10
39/10
35/6
35/6
3
•
•
•
•
•
•
•
•
1000
1000
1000
1000
1000
1000
1000
1000
1000
750
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
60M
60M
60M
60M
60M
60M
60M
60M
60M
40M
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50K
1M
1M
1M
1M
1M
1M
1k
5k
1k
20m
20m
20m
20m
200µ
30m
100µ
1000
1000
1000
•
•
•
•
•
•
•
2000µ
20m
25m
400
1000
1000
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6.0
12
12
12
12
12
12
12
12
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CAT II
1000V
CAT III
600V
CAT IV
300V
CAT IV
•
1000V
CAT IV
1000V
•
CAT IV
1000V
CAT IV
1000V
CAT IV
1000V
CAT IV
1000V
CAT II
1000V
CAT III
1000V
CAT III
600V
•
•
•
•
•
•
•
•
•
•
•
•
44mA 1000V
44mA 1000V
1A 600V
1A 600V
44mA 1000V
44mA 1000V
630mA 500V
630mA 500V
10 x 37
10 x 37
10 x 35
10 x 35
10 x 37
10 x 37
6 x 32
6 x 32
11A 1000V
11A 1000V
11A 1000V
10A 600V
10A 600V
11A 1000V
11A 1000V
6.3A 500V
6.3A 500V
10A 600V
6 x 37
6 x 37
6 x 37
6 x 37
6 x 37
6 x 37
6 x 37
6 x 37
6 x 37
6 x 37
•
•
•
•
•
11
Instruments
1.0
Digital Multimeters
T820
•DIY
• Large LCD display
•Continuity
•Diode
Technical Overview
Feature
Parameter
Accuracy
DC Voltage
200mV, 2, 20, 200, 600V
±0.5% + 4 Digit
AC Voltage
200, 600V
±1.2 % + 10 Digit
DC Current
200µ, 2mA, 20mA, 200mA,10A
±1.5 % + 3 Digit
Resistance
200, 2k, 20k ,200k ,20MΩ
±1.2% + 4 Digit
Counts
3 -1/2 Digits
1999 Counts
Model Specification
CAT III
600V
Power Source
1 x 9V Battery
T835
•DIY
•Continuity
•Diode
• Data hold
Technical Overview
Feature
Parameter
Accuracy
DC Voltage
200mV, 2, 20, 200, 600V
±0.5% + 4 Digit
AC Voltage
200, 500V
±1.2 % + 10 Digit
DC Current
200mA, 2mA, 20mA, 200mA,10A
±1.0 % + 2 Digit
Resistance
200, 2k, 20k, 200k, 20MΩ
0.8% + 10 Digit
Temperature
20°C to 1000°C
±1.0 % + 3 Digit
Counts
3 -1/2 Digits
1999 Counts
Model Specification
CAT III
600V
Power Source
1 x 9V Battery
Standard Accessories
Temp Probe TBMTEMPPROBE
T1300H
•Electronic
•Backlit
•Diode
•Continuity
• Data hold
Technical Overview
Feature
Parameter
Accuracy
DC Voltage
200mV, 2, 20, 20, 500V
±0.5% + 2 Digit
AC Voltage
200, 500V
±1.2% + 10 Digit
DC Current
2mA, 20mA, 200mA,10A
2m-200mA ±1% +2 Digit
Resistance
200, 2k, 20k, 200k, 200MΩ
±1% + 5 Digit
Counts
3 -1/2 Digits
1999 Counts
Model Specification
CAT III
12
600V
Power Source
1 x 9V Battery
Instruments
1.0
Digital Multimeters
T235H •Electrician’s
•Backlit
• Data hold
•Capacitance
Technical Overview
TRMS
Feature
Parameter
Accuracy
DC Voltage
200mV, 2mV, 20, 200, 1000V
±0.5% + 4 Digit
AC Voltage
20V, 200, 750V
±1.2 % + 10 Digit
DC Current
20mA, 200mA ,20A
±1.5 % + 3 Digit
Resistance
200, 20k, 200k,20MΩ, 200MΩ
±1.2% + 4 Digit
Temperature
-20°C to 1000°C
±0.8 % + 4 Digit
Capacitance
20nF, 2nF, 2000µF
±2.5 % + 20 Digit
Counts
3 -1/2 Digits
1999 Counts
Model Specification
Power Source
1 x 9V Battery
Standard Accessories
Temp Probe TBMTEMPPROBE
T48
•Electronic
•Backlit
•Capacitance
•Inductance
Technical Overview
Feature
Parameter
Accuracy
DC Voltage
200mV, 2, 20, 200, 1000V
±0.5% + 3 Digit
AC Voltage
200mV, 2, 20, 200, 750V
±0.8% + 5 Digit
DC Current
20µ, 200µ, 20mA, 200mA, 2A, 20A
±0.8% + 3 Digit
AC Current
200mA, 20A
±1.0% + 5 Digit
Resistance
200, 2k, 200k, 2M, 20M, 2000MΩ
±0.8 % + 3 Digit
Frequency
2k, 200kHz
±0.5% + 4 Digit
Temperature
-20°C to 1000°C
±1.0% + 4 Digit
Capacitance
20nF, 200nF, 2µF, 20µF, 200µF
20nF-20µf ±2.5% +20 Digit
Counts
3 -1/2 Digits
1999 Counts
Model Specification
Power Source
1 x 9V Battery
Standard Accessories
Temp Probe TBMTEMPPROBE
TBM805
• Electrician’s
• Splash proof
• Beep guard
•Rugged construction
• Data hold
•Min/Max
• Relative zero
Technical Overview
Feature
Parameter
Accuracy
DC Voltage
400mV, 4, 40, 400, 1000V
±1.0%+4 Digit
AC Voltage
400mV, 4, 40, 400, 1000V
4 -400V ±1.5% + 5 Digit, 1000V ±4.0% +
5 Digit
DC Current
400µ, 4000µ, 40mA, 400mA, 4.10A
±1.2% + 3 Digit
AC Current
400µ, 4000µ, 40mA, 400mA, 4.10A
±1.8% + 4 Digit
Resistance
400, 4k, 40k, 400k, 4M, 40MΩ
±2.0% + 4 Digit
Capacitance
500nF, 5µ, 50µ, 500µ, 3000µF
±3.5% + 6 Digit
Frequency
50k, 500k, 5k, 50k, 500k, 1MHz
±0.5% + 4 Digit
Counts
3 -3/4 Digits
4000 Counts
Model Specification
CAT III
600V
Power Source
2 x 1.5V AAA Batteries
Certificates
UL, IEC61010-1. Certificate of Conformance
13
Instruments
1.0
Digital Multimeters
TBM807
• Electrician’s
• Beep guard
• Data hold
•Min/Max
• Relative zero
Technical Overview
TRMS
Feature
Parameter
Accuracy
DC Voltage
400mV, 4, 40, 400, 1000V
±1.0%+4 Digit
AC Voltage
400mV, 4, 40, 400, 1000V
4 -400V ±1.5% + 5 Digit, 1000V ±4.0% + 5 Digit
DC Current
400µ, 4000µ, 40mA, 400mA, 4.10A
±1.2% + 3 Digit
AC Current
400µ, 4000µ, 40mA, 400mA, 4.10A
±1.8% + 4 Digit
Resistance
400, 4k, 40k, 400k, 4M, 40MΩ
±2.0% + 4 Digit
Temperature
20°C to 300°C
±2.0% + 3°C
Capacitance
500nF, 5µ, 50µ, 500µ, 3000µF
±3.5% + 6 Digit
Frequency
50k, 500k, 5k, 50k, 500k, 1MHz
±0.5% + 4 Digit
Counts
3 -3/4 Digits
4000 Counts
Model Specification
CAT III
600V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Temp Probe TBMTEMPPROBE
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM869
• Probe input warning
• Crest mode
• Duty cycle
• Dual display
Technical Overview
TRMS
CAT IV
1000V
Feature
Parameter
Accuracy
DC Voltage
500mV, 5, 50, 500, 1000V
0.02% + 2 Digit
AC Voltage
500mV, 5, 50, 500, 1000V
1.2% + 40 Digit (20hz-45hz)
DC Current
500µ, 5000µ, 50mA, 500mA, 5.10A
0.15% + 20 Digit (0.5% + 50 Digit att 500µA)
AC Current
500µ, 5000µ, 50mA, 500mA, 5.10A
0.5% + 50 Digit
Resistance
500, 5k, 50k, 500k, 5m, 50mΩ
0.07% + 10 Digit
Temperature
-50ºC to 1000ºC
0.3% + 1.5ºC
Capacitance
50nF, 500nF, 5µ, 500µ, 25mf
0.8% + 3 Digit
Frequency Line:
Logic
10Hz to 3kHz
0.002% + 4 Digit
Counts
5 -4/5 Digits
500000 Counts
Model Specification
Power Source
1 x 9V Battery
Standard Accessories
Temp Probe TBMTEMPPROBE
Optional Accessories
USB Cable and Software TBU86X SEE PG 19
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM252
• USB Interface
• Non-contact EF detection
• Separate battery compartment
Technical Overview
Feature
Parameter
Accuracy
DC Voltage
60mV, 600mV, 6, 60, 600, 1000V
±0.2% + 3 Digit
AC Voltage
60mV, 600mV, 6, 60, 600, 1000V
±0.2% + 3 Digit
DC Current
600µ, 6000µ, 60mA, 600mA, 6.8A
±0.5% + 3 Digit
AC Current
600µ, 6000µ, 60mA, 600mA, 6.8A
±1.0% + 3 Digit
Resistance
600, 6k, 60k, 600k, 6M, 60MΩ
±1.2% + 4 Digit
Temperature
-50ºC to 1000ºC
Capacitance
60nF, 600nF, 6µ, 60µ,600µ,3000µF
±2.0% + 5 Digit
Frequency
5Hz - 1MHz
±0.003% + 2 Digit
Auto Check
Counts
1V - 1000 V AC/DC
3 -5/6 Digits
6000 Counts
Model Specification
CAT III
14
600V
Power Source
1.5V AAA Battery
Standard Accessories
Temp Probe TBMTEMPPROBE
Optional Accessories
USB Cable and Software TBU20X SEE PG 19, USB Adaptor SEE PG 19,
Certificates
UL, IEC61010-1. Certificate of Conformance
Instruments
1.0
Digital Multimeters
TBM239R
• Phase rotation
• VFD V Hz
• Hz of line level voltage
• Probe input warning
• Non-contact EF detection
Technical Overview
TRMS
Feature
Parameter
Accuracy
DC Voltage
60mV, 600mV, 6000V, 60V, 600V, 1000V
0.03% + 2 Digit
AC Voltage
6V, 60V, 600V, 1000V
0.7% + 3 Digit
DC Current
200µA, 2000µA, 6A, 10A
0.7% + 3 Digit
AC Current
200µA, 2000µA, 6A, 10A
1.0% + 3 Digit
Resistance
600Ω - 60MΩ
0.3% + 2 Digit
Temperature
-40ºC to 400ºC
1.0% + 1ºC
Capacitance
2000nF, 20µF, 200µF, 2000µF
1.5% + 2 Digit
Frequency
100Hz - 50KHz
0.03% + 2 Digit
Counts
3-5/6 Digits
6000 Counts
VDF ACV
10Hz - 440Hz, 600V, 1000V
2.0% + 3 Digit
Model Specification
CAT IV
300V
Power Source
2 x 1.5V AAA Batteries
Optional Accessories
Magnetic Hanger TBMH01
Certificates
EN6101-1/2-2-030/-2-033
TBM829
• Splash/Drop proof
• USB interface
• Dual display
• Non-contact EF
• Auto check
• Crest (Peak-hold)
Technical Overview
TRMS
CAT III
1000V
Feature
Parameter
Accuracy
DC Voltage
60mV, 600mV, 6, 600, 1000V
0.08% + 2 Digit
2.0% + 3 Digit
AC Voltage
60mV, 600mV, 6, 600, 1000V
DC Current
600µ, 6000µ, 60mA, 600mA, 6A,10A
0.2% + 4 Digit
AC Current
600µ, 6000µ,60mA, 600mA, 6,10A
1.0% + 4 Digit
Resistance
0.1Ω - 60MΩ
1.5% + 5 Digit
Temperature
-50ºC to 1000ºC
0.3% + 2ºC
Capacitance
60nF, 600nF, 6µ, 60µ, 600µ, 20mF
5.0% + 5 Digit
Frequency
5Hz - 1MHz
0.004% + 4 Digit
Counts
3 -9/10 Digits
6000 Counts
Model Specification
Power Source
1 x 9V Battery
Standard Accessories
Temp Probe TBMTEMPPROBE
Optional Accessories
USB Cable and Software TBU86X SEE PG 19, Magnetic Hanger TBMH01
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM525
•Datalogger
• 87 000 points single display mode
•43 000 points dual display mode
• USB interface
• Non-contact EF detection
Technical Overview
TRMS
CAT IV
1000V
Feature
Parameter
Accuracy
DC Voltage
60mV, 600mV, 6, 600, 1000V
0.08% + 2 Digit
AC Voltage
60mV, 600mV, 6, 600, 1000V
0.08% + 2 Digit
DC Current
600µ, 6000µ, 60mA, 600mA, 6A,10A
0.8% + 6 Digit
AC Current
600µ, 6000µ, 60mA, 600m, 6,10A
0.8% + 6 Digit
Resistance
0.1Ω - 60MΩ
0.8% + 10 Digit
Temperature
-50ºC to 1000ºC
0.3% + 2ºC
Capacitance
60nF, 600nF, 6µ, 60µ, 600µ, 25mF
5.0% + 5 Digit
Frequency
5Hz to 1MHz
0.004% + 4 Digit
Counts
3 -9/10 Digits
10000 Counts
Model Specification
Power Source
1 x 9V Battery
Standard Accessories
Temp Probe TBMTEMPPROBE
Optional Accessories
USB Cable and Software TBU86X SEE PG 19, Magnetic Hanger TBMH01
Certificates
UL, IEC61010-1. Certificate of Conformance
15
Instruments
1.0
Digital Multimeters
TBM811
• General Purpose
• Splash/Drop proof
• 1000V AC/DC
• USB interface
• Dual display
•Backlit
Technical Overview - TBM811 and TBM811XEX
Feature
Parameter
Accuracy
Protection
DC Voltage
60mV, 600mV, 6600, 1000V
0.08% + 2 Digit
1050Vrms, 1450V peak
AC Voltage
60mV, 600mV, 6, 600, 1000V
2.0% + 3 Digit
1050Vrms, 1450V peak
DC Current
600µ, 6000µ, 60m, 600mA, 6.10A
0.2% + 4 Digit
0.44A/1000V Fuse (IR10kA)
11A/1000V Fuse (IR20kA)
AC Current
600µ, 6000µ, 60mA, 600mA, 6.10A
1.0% + 4 Digit
0.44A/1000V Fuse (IR10kA)
11A/1000V Fuse (IR20kA)
1.2V DC open circuit
Resistance
40.1Ω - 60MΩ
1.5% + 5 Digit
Capacitance
60nF, 600nF, 6µ, 60µ, 600µ, 20mF
5.0% + 5 Digit
Frequency
5Hz - 1MHz
±0.5% + 4 Digit
Input Warning
Transient
12kV surge
Protection
Counts
(1.2/50 µs) surge
3 -9/10 Digits
6000 Counts
Model Specification
LIFETIME WARRANTY
CAT IV
1000V
Power Source
1 x 9V Battery
Optional Accessories
USB Cable and Software TBU86X, USB Adaptor SEE PG 19,
Magnetic Hanger TBMH01
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM812
• General Purpose
• Splash/Drop proof
• 1000V AC/DC
• USB interface
• Dual display
•Backlit
Technical Overview - and TBM812XEX
Feature
Parameter
Accuracy
Protection
DC Voltage
60mV, 600mV, 6, 600, 1000V
0.08% + 2 Digit
1050Vrms, 1450V peak
AC Voltage
60mV, 600mV, 6, 600, 1000V
2.0% + 3 Digit
1050Vrms, 1450V peak
DC Current
600µ, 6000µ, 60mA, 600mA, 6.10A
0.2% + 4 Digit
0.44A/1000V Fuse (IR10kA)
11A/1000V Fuse (IR20kA)
AC Current
600µ, 6000µ, 60mA, 600mA, 6.10A
1.0% + 4 Digit
0.44A/1000V Fuse (IR10kA)
11A/1000V Fuse (IR20kA)
Resistance
40.1Ω - 60MΩ
1.5% + 5 Digit
1.2V DC open circuit
Capacitance
60nF, 600nF, 6µ, 60µ, 600µ, 20mF
5.0% + 5 Digit
Frequency
5Hz - 1MHz
0.004% + 4 Digit
Input Warning
Transient
12kV surge
Protection
Counts
TRMS
LIFETIME WARRANTY
CAT IV
16
1000V
(1.2/50 µs) surge
3 -9/10 Digits
6000 Counts
Model Specification
Power Source
1 x 9V Battery
Optional Accessories
USB Cable and Software TBU86X, USB Adaptor SEE PG 19,
Magnetic Hanger TBMH01
Certificates
UL, IEC61010-1. Certificate of Conformance
Instruments
1.0
Digital Multimeters
TBM811XEX
• General Purpose
• Splash/Drop proof
• 1000V AC/DC
• USB interface
• Dual display
•Backlit
Technical Overview see TBM811
TBM811XEX Intrinsically Safe
• 1A/1kV (IR10kA) for µA and mA (1000V HRC Fuse)
• 11A/1kV (IR20kA) for A (1000V HRC Fuse)
These meters comply to IEC SANS 60079-0:2000 and IEC SANS 60079-11:1999.
which is an electrical apparatus for explosive gas atmospheres. Part 0 (general
requirements) and Part 1 (intrinsic). The approved explosive protection rating of
this equipment is suitable for use in Zone 1 hazardous area. Group I (coal mines)
underground and Group II (surface).
Markings on meter:
LIFETIME WARRANTY
CAT IV
• Ex ib I Mb
• Ex ib IIC Gb
• SAEx MS/09-200X
•Ex ib falls under Zone 1 which is an area where flammable gas can occur in
normal operating conditions
1000V
TBM812XEX
• General Purpose
• Splash/Drop proof
• 1000V AC/DC
• USB interface
• Dual display
•Backlit
Technical Overview see TBM812
TBM812XEX Intrinsically Safe
• 1A/1kV (IR10kA) for µA and mA (1000V HRC Fuse)
• 11A/1kV (IR20kA) for A (1000V HRC Fuse)
These meters comply to IEC SANS 60079-0:2000 and IEC SANS 60079-11:1999.
which is an electrical apparatus for explosive gas atmospheres. Part 0 (general
requirements) and Part 1 (intrinsic). The approved explosive protection rating of
this equipment is suitable for use in Zone 1 hazardous area. Group I (coal mines)
underground and Group II (surface).
Markings on meter:
TRMS
• Ex ib I Mb
• Ex ib IIC Gb
• SAEx MS/09-200X
•Ex ib falls under Zone 1 which is an area where flammable gas can occur in
normal operating conditions
LIFETIME WARRANTY
CAT IV
1000V
17
Instruments
1.0
Digital Multimeters
TBM319 Automotive Tester
• Splash/Drop proof
•Selectable 4-stroke /2-stroke
•Sensitivity on RPM
• Selectable 1 to 12 cylinders
Technical Overview
Feature
Parameter
Accuracy
DC Voltage
60mV, 600mV, 6, 600, 1000V
0.4% + 3 Digit
AC Voltage
60mV, 600mV, 6, 600, 1000V
2.0% + 5 Digit
DC Current
600µ, 6000µ, 60mA, 600mA, 6, 10A
0.7% + 3 Digit
AC Current
600µ, 6000µ, 60mA, 600mA, 6, 10A
2.2% + 5 Digit
Resistance
600, 6k, 60k, 600k, 6M, 60MΩ
0.5% + 5 Digit
Temperature
-50ºC to 1000ºC
0.5% + 3 Digit
Capacitance
6µ, 60µ, 600µ, 2000µF
2.0% + 5 Digit
0.1% + 3 Digit
Frequency
10Hz - 1kHz
IP-RPM
240-20000RPM (Inductive)
IG-RPM
60-20000RPM (Contact)
DWELL
0.0º - 360º
1.2º/kRPM + 1 Digit
FUEL INJECTOR
0.05ms - 250.0ms
0.05ms + 1 Digit
Model Specification
CAT II
1000V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Temp Probe TBMTEMPPROBE, Banana Plug BKP60, Inductive Pickup Clip BP300
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM878 Insulation/Combination
•Industrial test probe
•Earth bond resistance
• VFD AC Voltage
• Relative zero
Technical Overview
Feature
Parameter
Accuracy
DC Voltage
60mV, 600mV, 6, 600, 1000V
0.09% + 3 Digit
AC Voltage
60mV, 600mV, 6, 600, 1000V
2.0% + 3 Digit
DC Current
60mA, 400mA
0.4% + 3 Digit
AC Current
60mA, 400mA
1.5% + 3 Digit
Resistance
600, 6k, 60k, 600k, 6M, 60MΩ
1.5% + 3 Digit
Insulation
Resistance
50V(3M-55MΩ),100V(3M-110MΩ), 250V(3M-275MΩ)
550V(3M-550MΩ), 1000V (3M-25GΩ)
1.5% + 3 Digit
Temperature
-50ºC to 1000ºC
9% + 2.0ºC
Capacitance
3µ,30µ,300µ,3000µF,30mF
10% + 5 Digit
Frequency
10Hz - 5KHz
0.02% + 4 Digit
Counts
3 -5/6 Digits
6000 Counts
Model Specification
TRMS
CAT III
1000V
Power Source
4 x 1.5V AA Batteries
Standard Accessories
Temp Probe TBMTEMPPROBE, Croc clips TBM878CLIP, Test Lead Adaptor
TBM878TIPS, Test Lead TBM878LEAD, Industrial Test Probe TBM878PROBE
Certificates
UL, IEC61010-1. Certificate of Conformance
T8209 Multipurpose 5-in-1
•Test probe input warning lights
• Diode test
Technical Overview
VΩA
%Rh
dB
Feature
Parameter
Accuracy
DC Voltage
400mV, 4, 40, 400, 1000V
±0.7% + 2 Digit
AC Voltage
4, 40, 400, 750V
±1.0% + 3 Digit
DC Current
400µA, 400mA, 10A
±2.0% + 10 Digit
AC Current
400µA, 400mA, 10A
±3.0% + 10 Digit
Resistance
400, 4k, 40k, 400k, 40MΩ
±2.0% + 5 Digit
Temperature
±20°C to 1000°C
±3.0% + 5 Digit
Capacitance
4.40nF, 400nF, 4µ, 40, 100µF
±3.0% + 3 Digit
Frequency
10Hz - 1kHz
±2.0% + 5 Digit
Humidity
20~95% RH
±5.0% RH
Sound Level (dB)
40~100dB
±3.5% at 94dB
Illuminance
1~40000 Lux
±5.0% + 10 Digit
Duty Cycle
0.1~99.9%
±3.0%
Counts
3 Digits
3999 Counts
Model Specification
CAT III
18
600V
Power Source
3 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch, Temp Probe TBMTEMPPROBE
Certificates
UL, IEC61010-1. Certificate of Conformance
Instruments
1.0
Accessories
TBU Software
• Optical interface adaptor
• USB Cable and software
Free Software updates available: www.brymen.com/product-html/software-download/
Digital Multimeters
Code
Page No.
TBRUSB
TBM252
TBM811
TBM812
TBM525
TBM829
TBM869
19
14
17
16
15
15
14
•
•
•
•
•
•
•
TBU20X
TBU86X
Clamp Meters
Code
Page No.
TBRUSB
TBM135
TBM157
TBM195
TBM197
19
25
29
28
29
•
•
•
•
•
TBU13X
TBU19X
TBRUSB (USB Adaptor) - Fits TBU20X, TBU13X, TBU19X
19
Instruments
1.0
Digital Clamp Meters - Selection Guide
FEATURES
TBM3030
TM175D
TBM072
TBM076
TBM086
T98
T260D
TBM116
TBM118
TBM135
T77N
PAGE
22
22
22
23
23
23
24
24
24
25
25
MAX AC
Current (A)
600
600
600
600
1000
1000
1000
1000
2000
1000
100
MAX DC
Current (A)
2
MAX AC
Voltage (V)
600
600
600
600
1000
750
750
600
600
600
MAX DC
Voltage (V)
600
600
600
600
1000
1000
1000
600
600
600
MAX
Resistance (Ω)
40M
6M
60k
60k
60k
2k
2M
40M
6M
1k
26
30
30
30
51
42
60
45
45
45
400
400
•
•
•
•
•
Jaw Size
(mm)
Temperature
(°C)
400
40
Continuity
•
•
•
•
•
Frequency
(Hz)
100k
1000k
100k
100k
100k
30k
500
3000µ
2500µ
2500µ
2500µ
2000µ
2000µ
•
•
•
•
•
•
•
•
•
•
4000
4000
6000
6000
6000
1999
1999
4000
6000
6000
6000
Blacklight
•
•
•
•
•
•
•
•
Auto Range
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Capacitance
(F)
Diode
Display
(Counts)
Data Hold
•
•
•
•
•
•
Min/Max
Display
•
•
•
•
•
•
AmptipTM
•
•
•
•
TRUE RMS
•
•
•
•
•
•
Data Logging
Safety
Category
20
CAT III
300V
CAT IV
300V
CAT III
600V
CAT III
600V
CAT III
1000V CAT III
600V
CAT III
600V
CAT III
600V
CAT III
600V
CAT III
600V
CAT III
300V
Instruments
1.0
Digital Clamp Meters - Selection Guide
TF3000
T223
TBM061
TBM062
TBM079
T8056
TBM162
TBM089
T2608
TBM195
TBM197
TBM157
25
26
26
26
27
27
27
28
28
28
29
29
3000
100
400
400
600
1000
800
1000
1500
2000
2000
1000
100
400
400
600
1000
1000
1000
2000
2000
2000
600
600
600
600
700
600
1000
750
1000
1000
600
600
600
600
600
1000
600
1000
1000
1000
1000
600
10k
40M
40M
60k
40M
40M
60k
40M
40M
40M
999.9
12.5
30
30
35
42
50
51
57
55
55
45
400
750
110
•
500
3000
4 Digits
400
1000
•
•
•
•
•
•
•
•
•
•
100k
100k
400
100k
1000k
400k
400k
400
400
500
3000µ
3000µ
2500µ
40µ
3000µ
2500µ
40µ
2000µ
2000µ
•
•
•
•
•
•
•
•
•
•
4000
4000
6000
4000
4000
6000
4000
6000
6000
6000
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CAT IV
600V
CAT III
300V
CAT III
600V
CAT III
600V
CAT III
600V
CAT III
600V
CAT III
600V
CAT IV
600V
CAT III
1000V
CAT IV
1000V
CAT IV
1000V
CAT III
600V
21
Instruments
1.0
Digital Clamp Meters
TBM3030 600A AC
• Jaw size: 26mm
• Large LCD display
• Diode
• Continuity
• Relative zero
• Data hold
Technical Overview
Feature
Parameter
Accuracy
AC Current
40, 600A
±1.9%+ 8 Digit
DC Current
AC Voltage
4, 40, 400, 600V
4.40, 400V ±1.5% + 5 Digit, 600V ±2.0% + 5 Digit
DC Voltage
400mV, 4, 40, 400, 600V
±1.0%+ 4 Digit
Resistance
400, 4k, 40k, 400k, 4M, 40MΩ
4k, 40k, 400kΩ ±0.6%+4 Digit, 4MΩ ±1.0% + 4 Digit,
40MΩ ±2.0% + 4 Digit
Capacitance
500nF, 5µ, 50µ, 500µ, 3000µF
±3.5% + 6 Digit
Frequency
5Hz to 100kHz
±0.5% + 4 Digit
Counts
3 -3/4 Digits
4000 Counts
Model Specification
CAT III
300V
Power Source
1 x 3V Battery CR2032
Standard Accessories
Carry Pouch
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM175D 600A AC
• Jaw size: 30mm
• AmptipTM
• Rotary selector switch
• Dual display
• Non-contact EF detection
• VFD, V & Hz feature
Technical Overview
Feature
Parameter
Accuracy
AC Current
60-600A
1.5% + 5 Digit
DC Current
200mA, 2A
1.0% + 5 Digit
AC Voltage
4, 40, 400, 600V
1.0% + 5 Digit
DC Voltage
400mV, 4, 40, 400, 600V
1.0% + 5 Digit
Temperature
-40º to 400º
-40º - 100º 1.0% + 0.8º, 100º - 400º, 1% + 1º
Resistance
600Ω, 6MΩ
600kΩ, 6kΩ, 60kΩ, 1.0% + 5 Digit,
600kΩ, 60MΩ 1.5% + 5 Digit
AmpTip™
TRMS
Capacitance
5200nF, 2500µF
2.0% + 4 Digit
Frequency
10Hz to 1000kHz
0.5% + 4 Digit
Counts
3 -3/4 Digits
4000 Counts
Model Specification
CAT IV
300V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch
Certificates
UL, IEC61010-1. EMC EN61326-1:2013. Certificate of Conformance
TBM072 600A AC
• Jaw size: 30mm
• AmptipTM
• Large LCD display
•Rotary selector switch
•Continuity
• Data hold
• Non-contact EF detection
Technical Overview
Feature
Parameter
Accuracy
AC Current
40, 600A
±1.8%+ 5 Digit
DC Current
AmpTip™
AC Voltage
4, 40, 400, 600V
4.40, 400V ±1.5% + 5 Digit, 600V ±1.2% + 7 Digit
DC Voltage
400mV, 4, 40, 400, 600V
±1.0%+ 5 Digit
Resistance
600, 6kΩ, 60kΩ
1.0% + 5 Digit
Frequency
5Hz to 100kHz
±0.5% + 4 Digit
Counts
3 -5/6 Digits
6000 Counts
Model Specification
TRMS
CAT IV
22
300V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch
Certificates
UL, IEC61010-1. Certificate of Conformance
Instruments
1.0
Digital Clamp Meters
TBM076 600A AC
• Jaw size: 30mm
• AmptipTM
•3-Phase rotation for mains and motor
• Non-contact EF detection
•Rotary selector switch
•Continuity
• Data Hold
Technical Overview
Feature
Parameter
Accuracy
AC Current
40, 600A
±1.8%+ 5 Digit
DC Current
AmpTip™
TRMS
DC Voltage
400mV, 4, 40, 400, 600V
±1.0%+ 5 Digit
AC Voltage
4, 40, 400, 600V
440, 400V ±1.5% + 5 Digit, 600V ±1.2% + 7 Digit
Resistance
600, 6kΩ, 60kΩ
600kΩ, 6kΩ, 60kΩ, ±1.0% + 5 Digit
Temperature
-40°C to 400°C
± 1% - 0.8°C, 100°C - 400°C ±1.0% - 1°C
Frequency
5Hz to 100kHz
±0.5% + 4 Digit
Capacitance
200µ, 2500µF
± 2% + 4 Digit
Counts
3 -5/6 Digits
6000 Counts
Model Specification
CAT IV
300V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch, Temp Probe TBMTEMPPROBE
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM086 1000A AC
• Jaw size: 51mm
• AmptipTM
•3-Phase rotation for mains and motor
• Non-contact EF detection
•Rotary selector switch
•
Peak RMS 80ms in-rush current
Technical Overview
Feature
Parameter
Accuracy
AC Voltage
600, 1000V
±1.8%+ 5 Digit
DC Voltage
600, 1000V
AC Current
60, 600, 1000A
DC Current
Resistance
AmpTip™
TRMS
4, 40, 400V ±1.5% + 5 Digit, 600V ±1.2% + 7 Digit
±1.0%+ 5 Digit
600, 6kΩ, 60kΩ
4k, 40k, 400kΩ ±0.6% +4 Digit, 4mΩ ±1.0%
+ 4 Digit, 40mΩ ±2.0% + 4 Digit
Temperature
-40°C to 400°C
± 1% - 0.8°C, 100°C - 400°C ±1.0% - 1°C
Frequency
5Hz to 100kHz
±0.5% + 4 Digit
Capacitance
200µ, 2500µF
± 2% + 4 Digit
Counts
3 -5/6 Digits
6000 Counts
Model Specification
CAT III
1000V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch, Temp Probe TBMTEMPPROBE
Certificates
UL, IEC61010-1. Certificate of Conformance
T98 1000A AC
• Jaw size: 42mm
•Backlit
•Continuity
• Data hold
Technical Overview
Feature
Parameter
Accuracy
AC Current
20, 200, 1000A
±2.0% + 5 Digit
DC Current
AC Voltage
750V
±1.0% + 5 Digit
DC Voltage
1000V
±1.0% + 2 Digit
Resistance
200, 2000Ω
±1.0% + 3 Digit
Temperature
-40°C to 750°C
±1.0% + 5 Digit
Counts
3 -1/2 Digits
1999 Counts
Model Specification
CAT III
600V
Power Source
1 x 9V Battery
Standard Accessories
Carry Pouch, Temp Probe TBMTEMPPROBE
Certificates
UL, IEC61010-1. Certificate of Conformance
23
Instruments
1.0
Digital Clamp Meters
T260D 1000A AC
• Jaw size: 60mm
• Combination Clamp
•Diode
• Continuity buzzer
Technical Overview
Feature
Parameter
Accuracy
DC Current
AC Current
20, 200, 1000A
±2% + 5 Digit
DC Voltage
200mV, 20, 200, 1000V
±0.5% + 1 Digit
AC Voltage
200, 750V
±1.2% + 10 Digit
Resistance
200, 2k, 20k, 200k,2MΩ
±1.0% + 2 Digit
Counts
3 -1/2 Digits
1999 Counts
Model Specification
CAT III
600V
Power Source
1 x 9V Battery
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM116 1000A AC
• Jaw size: 45mm
• Auto Check
•Diode
•Continuity
• Relative zero
• Data hold
Technical Overview
Feature
Parameter
Accuracy
DC Current
AC Current
400, 1000A
±1.8%+ 5 Digit
DC Voltage
400mV, 4, 40, 600V
±1.0%+ 5 Digit
AC Voltage
4, 40, 400, 600V
±4, 40, 400V ±1.5% + 5 Digit, 600V ±1.2% + 7 Digit
Resistance
400, 4k, 40k, 400k, 40MΩ
4k, 40k, 400kΩ ±0.6% +4 Digit , 4mΩ ±1.0%
+ 4 Digit, 40mΩ ±2.0% + 4 Digit
Counts
3 -3/4 Digits
4000 Counts
Model Specification
TRMS
CAT III
600V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM118 2000A AC
• Jaw size: 45mm
• Auto Check
• Emf detection
•Diode
•Continuity
• Relative zero
• Data hold
Technical Overview
Feature
Parameter
Accuracy
DC Current
AC Current
400, 2000A
1.5% + 5 Digit
DC Voltage
6, 60, 600V
2% + 5 Digit
AC Voltage
660, 600V
1.5% + 5 Digit
Resistance
6k, 60k, 600k, 6MΩ
1.2% + 4 Digit
Frequency
10 to 50kHz
0.5% + 4 Digit
Capacitance
100nF, 1000nF, 10µ, 100µ, 2000µF
3.5% + 5 Digit
Counts
3 -5/6 Digits
6000 Counts
Model Specification
TRMS
CAT III
24
300V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch
Certificates
UL, IEC61010-1. Certificate of Conformance
Instruments
1.0
Digital Clamp Meters
TBM135 1000A
• Jaw size: 45mm
• AC Data Logger • 5400 Point logging
•Continuity
Technical Overview
Feature
Parameter
Accuracy
DC Current
TRMS
CAT III
300V
AC Current
40, 400, 1000A
2.0% + 5 Digit
DC Voltage
600V
0.5% + 5 Digit
AC Voltage
600V
1.5% + 5 Digit
Resistance
999.9Ω
1.0% + 6 Digit
Temperature
-50 to 300°C
Frequency
5 to 500Hz
±0.5% + 4 Digit
Thd%-r
0.0%~99.9%
Fundamental 1% + 6 Digit
2~3 Harmonics 5% + 6 Digit
4~51 St Harmonics 2%
Counts
3 -5/6 Digits
6000 Counts
Model Specification
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch, Type-K Thermocouple
Optional Accessories
RS232 Cable and Software TBU13X, Adaptor SEE PG 19
Certificates
UL, IEC61010-1. Certificate of Conformance
T77N AC
• Earth Leakage
• Data hold
•Low pass filter with high stability 100Hz
•Autorange
•Bargraph
• Auto backlit sensor
•Frequency compare function
Technical Overview
Feature
Parameter
Accuracy
AC Current
0.1mA, 6mA
60A
100A
6mA ±1.0% rdg + 8 Digit
60A ±1.0% rdg + 8 Digit
100A ±2.0% rdg + 10 Digit
Counts
4 Digits
6000 Counts
Model Specification
TRMS
CAT III
300V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch
Certificates
UL, IEC61010-1
TF3000 3000A AC
• Jaw size: 110mm
•Flexible jaw (254mm length)
•Sample rate (4 times/second)
•Backlit
• Data hold
Technical Overview
Feature
Parameter
Accuracy
AC Current
0.1A, 30A
300A
3000A
30A ±3 % + 5 Digit
300A ±3 % + 5 Digit
3000A ±3 % + 5 Digit
Counts
4 Digits
3000 Counts
Model Specification
TRMS
CAT III
1000V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch
Certificates
UL, IEC61010-1. Certificate of Conformance
25
Instruments
1.0
Digital Clamp Meters
T223 100A AC/DC
• Jaw size: 12.5mm
•Automotive
• Concurrent reading
•Resistance
•Continuity
Technical Overview
Feature
Parameter
Accuracy
Protection
DC Current
1mA, 10mA, 10A, 100A
±2 % + 10 Digit
150A Rms
AC Current
1mA, 10mA, 10A, 100A
±2 % + 10 Digit
150A Rms
DC Voltage
0.1V, 600V
0.08% + 2 Digit
660Vrms
660Vrms
AC Voltage
0.1V, 600V
2.0% + 3 Digit
Resistance
1. 10kΩ
±1 % + 3 Digit
Model Specification
CAT III
300V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch
TBM061 400A AC/DC
• Jaw size: 30mm
• Diode
• Continuity
• Relative zero
• Auto power off
Technical Overview
Feature
Parameter
Accuracy
DC Current
0.01, 400A
±2.5% + 5 Digit
AC Current
40.01, 400A
±2.5% + 5 Digit
DC Voltage
400mV, 4, 40, 400, 600V
±1.0% + 4 Digit
AC Voltage
4, 40, 400, 600V
4, 40, 400V ±1.0% + 4 Digit, 600V ±2.0% + 4 Digit
4k, 40k, 400kΩ ±0.6%+4 Digit,
4MΩ ±1.0% + 4 Digit, 40MΩ ±2.0% + 4 Digit
Resistance
400, 4k, 40k, 400k, 40MΩ
Frequency
1kHz to 100kHz
±2.0% + 4 Digit
Capacitance
500nF, 5µ, 50µ, 500µ, 3000µF
±3.5% + 6 Digit
Counts
3 -3/4 Digits
4000 Counts
Model Specification
CAT III
600V
Standard Accessories
Carry Pouch
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM062 400A AC/DC
• Jaw size: 30mm
• Diode
• Continuity
• Relative zero
• Auto power off
• Backlit
Technical Overview
Feature
Parameter
Accuracy
DC Current
0.01, 400A
±2.5% + 5 Digit
AC Current
0.01, 400A
±2.5% + 5 Digit
DC Voltage
400mV, 4, 40, 400, 600V
±1.0% + 4 Digit
AC Voltage
4, 40, 400, 600V
1.5% + 5 Digit
Resistance
400, 4k, 40k, 400k, 4M, 40MΩ
4k, 40k, 400kΩ ±0.6%+4 Digit, 4MΩ ±1.0% + 4 Digit,
40MΩ ±2.0% + 4 Digit
Frequency
1kHz to 100kHz
±2.0% + 4 Digit
Capacitance
500nF, 5µ, 50µ, 500µ, 3000µF
±3.5% + 6 Digit
Counts
3 -3/4 Digits
4000 Counts
Model Specification
TRMS
CAT III
26
300V
Weight
218g
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch
Certificates
UL, IEC61010-1. Certificate of Conformance
Instruments
1.0
Digital Clamp Meters
TBM079 600A AC/DC
• Jaw size: 35mm
• AmptipTM
•3-Phase rotation for mains and motors
• Non-contact EF detection
•Rotary selector switch
• Data hold
Technical Overview
AmpTip™
TRMS
Feature
Parameter
DC Current
40, 600A
Accuracy
AC Current
40, 600A
±1.8%+ 5 Digit
DC Voltage
400mV, 4, 40, 400, 600V
±1.0%+ 5 Digit
AC Voltage
4, 40, 400, 600V
4, 40, 400V ±1.5% + 5 Digit, 600V ±1.2% + 7 Digit
4k, 40k, 400kΩ ±0.6% +4 Digit, 4mΩ ±1.0% + 4 Digit,
40mΩ ±2.0% + 4 Digit
Resistance
600, 6k, 60kΩ
Temperature
-40°C to 400°C
4mΩ ±1.0% + 4 Digit
Frequency
50Hz to 400Hz
40mΩ ±2.0% + 4 Digit
Capacitance
200µ, 2500µF
Counts
3 -5/6 Digits
6000 Counts
Model Specification
CAT III
600V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch, Temp Probe TBMTEMPPROBE
Certificates
UL, IEC61010-1. Certificate of Conformance
T8056 1000A AC/DC
• Jaw size: 42mm
• Duty cycle
•Diode
•Continuity
• Auto power off
• Relative zero
• Data hold
Technical Overview
Feature
Parameter
Accuracy
DC Current
400, 1000A
±3.0% + 3 Digit
AC Current
400, 1000A
±3.0% + 3 Digit
DC Voltage
60mV, 600mV, 6, 600, 1000V
±0.8% + 3 Digit
AC Voltage
60mV, 600mV, 6, 600, 1000V
±1.0% + 10 Digit
Resistance
400, 4k, 40k, 400k, 4m, 40MΩ
±2.0% + 3 Digit
Temperature
-40°C to 750°C
±1.0% + 6 Digit
Frequency
40, 400, 4k, 40k, 100kHz
±2.0% + 1 Digit
Capacitance
4nF, 40nF, 400nF, 4µ, 40µF
±4.0% + 10 Digit
Counts
3 -3/4 Digits
4000 Counts
Model Specification
CAT III
600V
Power Source
1 x 9V Battery
Standard Accessories
Carry Case, Temp Probe TBMTEMPPROBE
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM162 1000A AC/DC
• Jaw size: 50mm
• Large display
• Max hold
•Continuity
•Diode
•Backlit
Technical Overview
Feature
Parameter
Accuracy
AC Current
400, 800A
400A, ±2.0% + 5 Digit, 800A, 5.0% + 30 Digit
DC Current
400, 1000A
±0.5 % + 3 Digit
AC Voltage
600V
±2 % + 5 Digit
DC Voltage
600V
±2 % + 5 Digit
Resistance
400, 4k, 4M, 40MΩ
±1.0 % + 4 Digit
±3.5 % + 6 Digit
Capacitance
500nF, 5µ, 50µ, 500µ, 3000µF
Frequency
15Hz- 1000Hz
Counts
3 -3/4 Digits
4000 Counts
Model Specification
TRMS
CAT III
600V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Pouch
Certificates
UL, IEC61010-1. Certificate of Conformance
27
Instruments
1.0
Digital Clamp Meters
TBM089 1000A AC/DC
•3-Phase rotation for mains and motors
• AmptipTM
• Non-contact EF detection
•Rotary selector switch
•Continuity
•
Flashlight
Technical Overview
Feature
Parameter
DC Current
60, 600, 1000A
AC Current
60, 600, 1000A
±1.8%+ 5 Digit
DC Voltage
600, 1000V
±1.0%+ 5 Digit
AC Voltage
600, 1000V
4, 40, 400V ±1.5% + 5 Digit, 600V ±1.2% + 7 Digit
600, 6k, 60kΩ
4k, 40k, 400kΩ ±0.6% +4 Digit, 4mΩ ±1.0%
+ 4 Digit, 40mΩ ±2.0% + 4 Digit
Resistance
AmpTip™
TRMS
Accuracy
Temperature
-40°C to 400°C
±1.0% + 6 Digit
Frequency
5Hz to 400kHz
±0.5% + 4 Digit
Capacitance
2500µF
Counts
3 -5/6 Digits
6000 Counts
Model Specification
CAT IV
1000V
Power Source
2 x 1.5V AA Batteries
Standard Accessories
Carry Pouch, Temp Probe TBMTEMPPROBE
Certificates
UL, IEC61010-1. Certificate of Conformance
T2608 2000A DC/ 1500A AC
• Jaw size: 57mm
•Min/Max
•Data hold/Peak hold
• Auto power off
•Diode
•Continuity
•Bargraph
Technical Overview
TRMS
CAT III
1000V
Feature
Parameter
Accuracy
DC Current
400, 2000A
±1.5% rdg + 5 Digit
AC Current
400, 1500A
±1.5% rdg + 5 Digit
DC Voltage
400mV, 4, 40, 400, 1000V
±0.5% rdg + 1 Digit
AC Voltage
400mV, 4, 40, 400, 750V
±1.5% rdg + 4 Digit
Resistance
400, 4k, 40k, 400k, 4M, 40MΩ
±1.0% rdg + 4 Digit
Frequency
10, 1k, 10k, 100k, 400kHz
±0.1% rdg + 4 Digit
Capacitance
4nF, 40nF, 400nF, 4µ, 40µF
±1.0% rdg + 4 Digit
Counts
3 -3/4 Digits
4000 Counts
Model Specification
Power Source
1 x 9V Battery
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM195 2000A AC/DC
• Jaw size: 55mm
• Dual display
•Non-contact EF detection
•VFD (Variable frequency drives)
• Relative zero
• Data logging
•Autocheck
•Diode
Technical Overview
Feature
Parameter
Accuracy
DC Current
100, 200, 500, 1000, 2000A
±2 % + 5 Digit
AC Current
100, 200, 500, 1000, 2000A
±2 % + 5 Digit
DC Voltage
6, 60, 600, 1000V
±1.2 % + 5 Digit
AC Voltage
6, 60, 600, 1000V
±1.2 % + 5 Digit
Resistance
600, 6k, 60k, 6M, 40MΩ
±0.5 % + 5 Digit
±2.0 % + 5 Digit
Capacitance
60nF, 6µ, 60µ, 600µ, 2000µF
Frequency
400Hz
Counts
3 -5/6 Digits
6000 Counts
Model Specification
TRMS
CAT IV
28
1000V
Power Source
2 x 1.5V AA Batteries
Standard Accessories
Carry Pouch
Optional
Temp Probe TBMTEMPPROBE, TBU19X SEE PG 19
Certificates
UL, IEC61010-1. Certificate of Conformance
Instruments
1.0
Digital Clamp Meters
TBM197 2000A AC/DC
• Jaw size: 55mm
• Dual display
•Non-contact EF detection
•VFD (Variable frequency drives)
• Data logging
•Diode
Technical Overview
TRMS
CAT IV
1000V
Feature
Parameter
Accuracy
DC Current
100, 200, 500, 1000, 2000A
±2 % + 5 Digit
AC Current
100, 200, 500, 1000, 2000A
±2 % + 5 Digit
DC Voltage
6, 60, 600, 1000V
±1.4 % + 7 Digit
AC Voltage
6, 60, 600, 1000V
±1.4 % + 7 Digit
Resistance
600, 6k, 60k, 6M, 40MΩ
±0.5 % + 5 Digit
Frequency
400Hz
Temperature
-50°C to 1000°C
±0.3 % + 4 Digit
Capacitance
60nF, 6µ, 60µ, 600µ, 2000µF
±2.0 % + 5 Digit
Counts
3 -5/6 Digits
6000 Counts
Model Specification
Power Source
2 x 1.5V AA Batteries
Standard Accessories
Carry Pouch
Optional Accessories
Temp Probe TBMTEMPPROBE, TBU19X SEE PG 19
Certificates
UL, IEC61010-1. Certificate of Conformance
TBM157 1000A AC
• Jaw size: 45mm
• 3-Phase Power Clamp
• Total power factor
• Data logging
Technical Overview
Feature
Parameter
Accuracy
AC Current
40, 400, 1000A
2.2% + 5 Digit
DC Voltage
600V
0.5% + 5 Digit
AC Voltage
600V
1.5% + 5 Digit
Resistance
999.9Ω
1.0% + 6 Digit
Frequency
5 ~ 500Hz
0.5% + 4 Digit
Power
0.00 ~ 600kVA, 0.00 ~ 600kW
0.00 ~ 600kVAR
±4.0% + 10 Digit
Thd%-f
Total harmonic
distortion
0.0% ~ 999.9%
Fundamental 1.5%+6 Digit
2~3 Harmonics 7%+6 Digit
4~51 Harmonics 2%+6 Digit
Count
3 -5/6 Digits
6000 Counts
Model Specification
TRMS
CAT III
600V
Power Source
2 x 1.5V AAA Batteries
Standard Accessories
Carry Case, Temp Probe TBMTEMPPROBE
Optional Accessories
RS232 Cable and Software TBU13X, USB Adaptor SEE PG 19
Certificates
UL, IEC61010-1. Certificate of Conformance
T2000 Earth Resistance Clamp
•
•
•
•
Jaw size: 32mm
Direct earth probes measurement
Leakage current
Alarm thresholds
• Current noise
• Data HOLD function
• 99 measurement storage locations
Technical Overview
Feature
Parameter
Accuracy
Resistance
0.01Ω~0.999Ω
0.10Ω~0.99Ω
1Ω~49.9Ω
50.0Ω~99.9Ω
100Ω~199.9Ω
200Ω~395Ω
400Ω~590Ω
600Ω~1000Ω
±(1.0%+0.01Ω)
±(1.0%+0.01
±(1.5%+0.1Ω)
±(2.0%+0.3Ω)
±(3.0%+1Ω)
±(6.0%+5Ω)
±(10%+10Ω)
±(20%+20Ω)
AC Current
0.00A~80mA
80~650mA
650~999.5mA
1.000~3.995mA
4.00~20.00mA
±(2.5%+1mA)
±(2.5%+2mA)
±(2.5%+0.003A)
±(2.5%+0.01A)
±(2.5%+0.05A)
Model Specification
TRMS
CAT III
150V
Power Source
4 x 1.5V AAA Batteries
Standard Accessories
Resistive Test Loop, Carry Case
Certificates
UL, IEC61010-1. Certificate of Conformance
29
Instruments
1.0
Earth Resistance Testers - Selection Guide
*
FEATURES
T416
T1805
T1105
T1820
T1120
T2000
PAGE
31
31
32
32
32
29
Earth Resistance Test (Ω)
50k
1k
1.2k
2k
2k
1k
Earth Resistance Test (V)
460
30
30
200
200
•
•
•
•
Micro Processor Controlled
•
Long Test
Auto Power Off (APO)
•
PC Connection
•
Data Saving
•
On Display Help
•
Backlight
•
Data Hold
•
Test Cables Resistance
Compensation
•
Ground Resisting 4 Wire
•
Detection of Disturbances
Currents
•
•
•
•
•
Safety Category
265V
•
•
•
•
CAT III
*Optional accessory software TOPVIEW and USB Cable (T416)
30
•
•
•
CAT III
•
•
Taut Band Movement
Battery Check
•
150V
CAT IV
•
30V
CAT II
•
300V
CAT III
200V
CAT III
150V
Instruments
1.0
Earth Resistance Testers
T416
•
•
•
•
•
Earth Resistance Tester
350 Memory locations
RS232 interface
Resistivity
2 Wire earth resistance measurements
(2 WIRES)
• Three wire earth resistance
measurements (3 WIRES)
• C
alculation of earth resistance average
value with both two and three wires
(RAVG)
• Calculation of resistivity average value
(ρAVG)
• 4 Wire method
Technical Overview
Earth Resistance Measurement
Range Re (Ω)
0.0 - 19.99
20.0 - 199.9
Resolution (Ω)
0.01
0.1
Accuracy
200 - 1999
1
±(2% Reading + 3 digits)
Measuring
Frequency
125Hz / 75Hz/41.66Hz ±1Hz
Test Current
≤ 10mA
Open Circuit
Voltage
≤ 30V
Wave form of
test voltage
Sinusoidal
GROUND RESISTIVITY Measurement
Range p
0.6 19.99Ωm
0.125 1.256kΩm
1.25 19.99kΩm
20.0 - 199.9kΩm
0.001kΩm
0.01kΩm
0.1kΩm
Resolution
0.1Ωm
Accuracy
±(2% Reading + 3 digits)
Measuring
Frequency
125Hz / 75Hz / 41.66Hz ±1Hz
Test Current
≤ 10mA
Open Circuit
Voltage
≤ 30V
Wave form of
test voltage
Sinusoidal
Measurement of DISTURBANCE voltage
Range (V)
500
Resolution (V)
1
Accuracy
±(2% Reading + 3 digits)
Model Specification
CAT III
265V
Power Source
6 x 1.5V AA Batteries
Standard Accessories
Cables and 4 rods, Carry case, English instruction manual, Test Leads (Lengths:
Red - 13 Meters, Blue - 20 Meters, Green - 6 Meters, Green - 6 Meters
Optional Accessories
Software and USB Cable TOPVIEW
Certificates
UL, IEC61010-1. Calibration Certificate ISO9000.Certificate of Conformance
T1805
• Analogue Earth Resistance Tester
• Large display
•Taut band movement
• 2 and 3 Wire tester
Technical Overview
Feature
Parameter
Measuring
Ranges
Resistance: 10, 100, 1.000Ω
Earth Voltage
30V AC (5kΩ/V)
Measuring
System
Resistance: (Constant
current inverter 820Hz
approx, 2mA)
Voltage: rectifier type
0 - 30 VAC, 40~500 Hz
Withstand
Voltage
1.500V AC (one minute)
Accuracy
±1.8% + 4 Digit
Resistance
±2.5% of full scale
Voltage
±1% of full scale
Model Specification
CAT III
150V
Power Source
8 x 1.5V AA Batteries
Standard Accessories
Test Leads (Lengths: Red - 1 Meter and 15 Meters, Yellow - 10 Meters,
Green - 5 Meters) Earth Spikes, Shoulder Belt
Certificates
UL, IEC61010-1. Certificate of Conformance
31
Instruments
1.0
Earth Resistance Testers
T1105
• Earth Resistance Tester
• Analogue display
•Safety voltage protection
• Compact design
Technical Overview
Feature
Parameter
Measuring
Ranges
Resistance:
0-12Ω, 0-120Ω, 0-1200Ω
Earth Voltage
30V AC (5kΩ/V)
Measuring
System
Earth resistance by Constant
current inverter Hz approx, 2mA
square signal
Accuracy
Resistance
±3% of full scale
Voltage
±2.5% of full scale
Model Specification
CAT IV
300V
Power Source
8 x 1.5V AA Batteries
Standard Accessories
Test Leads (Lengths: Red - Meter and 15 Meters, Yellow - 10 Meters,
Green - 5 Meters) Earth Spikes, Shoulder Belt
T1820
• Digital Earth Resistance Tester
•Earth voltage detection
•2mA earth resistance to test
• 2 and 3 Wire Testing
Technical Overview
Feature
Parameter
Measuring
Ranges
Resistance: 20, 200, 2kΩ
Earth Voltage
200V AC (40 - 500hz)
Measuring
System
Earth resistance by constant
current inverter, 820Hz, 2mA
Approx
Over voltage
indication
1 (MSD)
Resistance
±2% rdg + 2 Digit
Voltage
Counts
Accuracy
±1% rdg + 2 Digit
3 -1/2 Digits
2000 Counts
Model Specification
CAT II
300V
Power Source
8 x 1.5V AA Batteries
Standard Accessories
Test Leads (Lengths: Red - Meter and 15 Meters, Yellow - 10 Meters,
Green - 5 Meters) Earth Spikes, Shoulder Belt
Certificates
UL, IEC61010-1. Certificate of Conformance
T1120
• Digital Earth Resistance Tester
•Safety voltage protection
• Compact design
Technical Overview
Feature
Parameter
Measuring
Ranges
Resistance: 20Ω, 200Ω, 2kΩ
Earth Voltage
0-200V AC
Measuring
System
Earth resistance by Constant
current inverter 820Hz approx,
2mA square signal
Withstand
Voltage
1.500V AC (one minute)
Accuracy
Resistance
±2.0 % + 2 Digit
Voltage
±1.0 % + 2 Digit
Model Specification
CAT III
32
300V
Power Source
8 x 1.5V AA Batteries
Standard Accessories
Test Leads (Lengths: Red - Meter and 15 Meters, Yellow - 10 Meters,
Green - 5 Meters) Earth Spikes, Shoulder Belt
Certificates
UL, IEC61010-1. Certificate of Conformance
Instruments
1.0
Compliance Testers
TCTCDK Compact Digital Compliance Kit
• Kit supplied in a sturdy case with foam cut out to secure each instrument
• Refer to individual products for technical overview
Code
Instrument
TCTCS
Case
Page Number
TCTCDTFM
Foam
T1151
1000V Digital Insulation Tester
37
T1120
Digital Tester
32
TEL1TLB
ELCB /Polarity Socket Tester
44
T1125
LOOP/PSC Tester
41
TBM3030
Digital Clamp Meter
22
T890
Phase Rotation Tester
45
TCTDT Digital Compliance Kit
• Kit supplied in a sturdy case with foam cut out to secure each instrument
• Refer to individual products for technical overview
Code
Instrument
TCTCS
Case
Page Number
TCTDTFM
Foam
T1851
Digital Insulation Tester
37
T1820
Digital Earth Resistance Tester
32
TEL1TLB
ELCB /Polarity Socket Tester
44
T1825
LOOP/PSC Tester
41
TBM3030
Digital Clamp Meter
22
T887
LCD Phase Rotation
46
TCTRP Analogue Compliance Kit
• Kit supplied in a sturdy case with foam cut out to secure each instrument
• Refer to individual products for technical overview
Code
Instrument
TCTCS
Case
Page Number
TCTCDKFM
Foam
T1800
Insulation Tester
36
T1805
Analogue Earth Resistance Tester
31
TEL1TLB
ELCB /Polarity Socket Tester
44
T1825
Loop/PSC Tester
41
TBM811
Digital Multimeter
16
T860
Phase Rotation and Motor Rotation
46
33
Instruments
1.0
Insulation Testers - Selection Guide
FEATURES
PAGE
Insulation Tester Voltage (V)
Insulation Resistance Ranges (Ω)
T1132
T1800
T1832
T1851
T1151
T10020C
36
36
36
37
37
38
1000
1000
1000
1000
1000
1000
5kv
250V/100M
250V/100M
250V/100M
250V/200M
250V/2G
500V/200M
500V/200M
500V/200M
500V/200M
500V/4G
1000/400M
1000/400M
1000/400M
1000/200M
1000/200M
Micro Processor Controlled
•
Bargraph
•
T5050
500
500V/
50M
50M
•
•
Counting Timer
Long Test
•
•
Auto Range
•
Auto Power Off (APO)
•
Auto Discharge
•
External Voltage Warning Indication
•
•
Live Circuit Warning
•
•
•
•
•
•
•
PI Polarisation Index
•
Eeprom Calibration
Backlight
Data Hold
•
Relative
Auto Null
•
Fuse Protection
•
B.S. 16TH Edition
•
•
•
•
•
•
•
•
Mirror Scale
•
•
Taut Band Movement
•
•
•
AC Measurement (V)
500
500
500
500
700
500
500
950
500
500
1999
5k
5kΩ
DC Measurement (V)
Hand Free Testing Locker
•
•
•
Battery Check
•
•
•
3/500
50
3/500
Continuity Test Range (Ω)
200/ 2000
DAR (Dialectical Absorption Ratio)
•
Lifetime Warranty
Safety Category
34
•
CAT III
•
500V
CAT III
500V
CAT III
•
500V
CAT III
500V
CAT III
600V
Instruments
1.0
Insulation Testers - Selection Guide
T10020
T5050C
TIN4D
TIN5D
TIN6D
TIN6A
TIN7D
TIN8D
38
38
39
39
39
40
40
1000V
5kv
5kv
10kv
10kv
10kv
10kv
15k
500V/
500V/
50M
50M
5kV/200G
10kV/400
800k
500G
500V/700G
15kV/2T
•
•
•
•
500V/25G
1kV/500G
2.5k/125Ω, 5k/250
•
1kV/50G
2.5k/125,
5k/250
10kV/250
500V/25G
10kV/500
1000/200M
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
500
500
500
•
5kΩ
•
•
•
5k
CAT III
300V
CAT III
300V
CAT III
300V
CAT III
300V
CAT III
300V
CAT IV
600V
35
Instruments
1.0
Insulation Testers
T1132 1000V
• Analogue Insulation Tester
•Safety voltmeter protection
•Live circuit indication
• Auto discharge
• AC voltage measurement
• Zero adjustment knob
Technical Overview
LIFETIME WARRANTY
CAT III
500V
Insulation Test Voltage
250, 500, 1000V
Insulation Resistance
250V (100MΩ), 500V (200MΩ), 1000V (400MΩ)
AC Voltage
0 to 600V
Ohm meter
3 to 500Ω
Model Specification
Power Source
8 x 1.5V AA Batteries
Certificates
Certificate of Conformance
T1800 1000V
• Analogue Insulation Tester
•Heavy duty carry case
• Taut band movement
• Auto discharge
• Colour coded scale
• Live circuit indication
• AC Voltage measurement
Technical Overview
Feature
Parameter
Accuracy
Test Voltages and measuring
range
250V 0-100MΩ, 500V
0-200MΩ, 1000V 0-400MΩ
Voltage
±2% of scale length
Short circuit terminal current
145mA DC Approx
Insulation
±5% of Indicated value
Output Voltage on open circuit
Rated test voltage + 10%
Short Circuit Current (Max)
2mA DC
Continuity Range
0 -50Ω
Open circuit terminal voltage
445mV DC Approx
Voltage Measurement
0 -500 VAC
Model Specification
CAT III
500V
Power Source
8 x 1.5V AA Batteries
Standard Accessories
Test Leads (Lengths: Red - Meter and 15 Meters, Yellow - 10 Meters,
Green - 5 Meters) Earth Spikes, Shoulder Belt
Certificates
UL, IEC61010-1. Certificate of Conformance
T1832 1000V
• Analogue Insulation Tester
•Taut band movement
•Live circuit indication
•200mA continuity short circuit current
•Auto discharge
•AC voltage measurement
•Rugged construction
• Nulling of test leads
• Continuity buzzer
• Mirror scale
Technical Overview
LIFETIME WARRANTY
CAT III
36
500V
Feature
Parameter
Accuracy
Test Voltages and measuring
range
250V 0-100MΩ, 500V
0-200MΩ, 1000V 0-400MΩ
Voltage
±3% of scale lengt
Short circuit terminal current
210mA DC Approx
Insulation
±5% of Indicated value
Output Voltage on open circuit
Rated test voltage + 10%
Short Circuit Current (Max)
1.3mA
Continuity Range
0 -50Ω
Open circuit terminal voltage
445mV DC Approx
Voltage Measurement
0 -500 VAC
Model Specification
Power Source
8 x 1.5V AA Batteries
Certificates
UL, IEC61010-1. Certificate of Conformance
Instruments
1.0
Insulation Testers
T1851 1000V
• Digital Insulation Tester
• Continuity buzzer
• Live circuit warning
• 210mA continuity short circuit current
•AC voltage measurement
• Auto power off
• Auto discharge
•Live circuit indication
Technical Overview
Feature
Parameter
Accuracy
Test Voltages and measuring
range
250V 0-200MΩ, 500V
0-200MΩ, 1000V
0-2000MΩ
Voltage
±1.5 % + 3 Digit
Short circuit terminal current
210mA DC Approx
Insulation
±1.5 % + 5 Digit
Output Voltage on open circuit
Rated test voltage + 10%
Short Circuit Current (Max)
1mA
Continuity Range
0-2kΩ
Open circuit terminal voltage
445mV DC Approx
Voltage Measurement
0 -500 VAC
Counts
3 -1/2 Digits
2000 Counts
Model Specification
CAT III
500V
Power Source
8 x 1.5V AA Batteries
Certificates
UL, , IEC61010-1. Certificate of Conformance
T1151 1000V and T11510LED
T1151 1000V and T11510LED Insulation Testers
• Digital Insulation Tester
•Safety voltmeter protection
•Live circuit indication
• Auto discharge
•AC voltage measurement
•OLED Display (Organic light-emitting diode - T11510LED)
Technical Overview
T1151
LIFETIME WARRANTY
CAT III
T115150LED
500V
Insulation Test Voltage
250,500,1000V
Insulation Resistance
250V (2k-2GΩ), 500V (4k-4GΩ), 1000V (8k-8GΩ)
AC Voltage
0 to 700V
Ohm meter
0.01 to 1999Ω
Test Current
>SH220mA­
Model Specification
Power Source
8 x 1.5V AA Batteries
Certificates
Certificate of Conformance
LIFETIME WARRANTY
37
Instruments
1.0
Insulation Testers
T10020C 1000
• Hand Crank
•Sturdy movement suitable for stringent fieldwork
•Built-in discharge facility for operator safety
•Accurate and stable reading using knife-edge pointer
•Improved AC brushless generator
•Dust protected terminals
Technical Overview
Rated Voltage
1000V
Insulated Resistance
200MΩ
Continuity Range
0 - 50kΩ
Accuracy
±5 % Over First Effective Range
±10 % Over 2nd Effective Range
Model Specification
Power Source
Mechanical winder
Standard Accessories
Case, leads
T5050C 500V
• Hand Crank
•Cross coil movement suitable for stringent fieldwork
•Built-in discharge facility for operator safety
•Accurate and stable reading using knife-edge pointer
•Improved AC brushless generator
•Guard terminal to minimise effect of surface leakage current
Technical Overview
Test Voltage
1000V
Insulation Resistance
5000MΩ
Model Specification
Power Source
Mechanical winder
Standard Accessories
Case, Leads
TIN4D 5KV
• Displays insulation test time
• Displays warning
• Fully protected crow bar
• Insulation test time interval up to 99 sec
• Auro range
• 4 Insulation test voltage
Technical Overview
Insulation Test Voltage
500V
1000V
2500V
5000V
Insulation Resistance
0-30GΩ
0-60GΩ
0-125GΩ
0-250GΩ
Accuracy
±3% reading + 2 digit
Output Current Limit
50µA to 100µA
Live Warning
>500 Volts
Operating Temperature
0 to 40°C
Operating Humidity
85% Max relative humidity
Model Specification
38
Power Source
8 x 1.5V C Batteries Alkaline
Standard Accessories
Carry Pouch
Certificates
Certificate of Conformance
Instruments
1.0
Insulation Testers
TIN5D 10kV
• Auto ranging on all ranges
• Displays insulation test time
• Displays warning
• Fully protected crow bar
• Insulation test time interval up to 99 sec
• 4 Insulation test voltage
Technical Overview
Insulation Test Voltage
1000V
2500V
5000V
10000V
Insulation Resistance
0-60GΩ
0-125GΩ
0-250GΩ
0-500GΩ
Accuracy
±3% reading + 2 digit
Output Current Limit
50µA to 100µA
Live Warning
>500 Volts
Operating Temperature
0ºC to 40ºC
Operating Humidity
85
Model Specification
Power Source
8 x 1.5V C Batteries Alkaline
Standard Accessories
Carry Pouch
Certificates
EN61010-1. Certificate of Conformance
TIN6D 10kV
•20 Insulation test voltages
(500V - 10kV)
• Heavy duty carry case
• Silicone test leads
• Anti skid/vibration absorbing enclosure
• Live circuit warning
• Auto discharge
• Insulation test time interval
up to 99 sec
• Auto range
• Auto off
Technical Overview
Feature
Parameter
Insulation Test Voltage
500V - 10kV
Measuring Range (Autoranging)
500V - 10kV,
25GΩ - 500GΩ
Output Power Limit
1W
Short Circuit Current (Max)
1.25mA
Insulation Accuracy
±3% + 1 Digit
Model Specification
CAT III
300V
Power Source
8 x 1.5V C Batteries Alkaline
Standard Accessories
Carry Pouch
Certificates
EN61010-1. Certificate of Conformance
TIN6A 5kV-10kV
• Live circuit warning
• Auto discharge
• Battery life indication
• Heavy duty carry case
• Silicon test leads
• 2 Test voltage: 5kV and 10kV
Technical Overview
Feature
Parameter
Accuracy
Insulation Test Voltage
5kV
10kV
Insulation Resistance
0-200GΩ
0-400GΩ
Accuracy
±5% of scale length
Output Power Limit
50µA to 100µA
Live Warning
>500 V AC
Operating Temperature
0ºC to 40ºC
Operating Humidity
85
Model Specification
Power Source
6 x 1.5V C Batteries
Certificates
Certificate of Conformance
39
Instruments
1.0
Insulation Testers
TIN7D 10kV and TIN7DOLED 10kV
TIN7D 10kV and TIN7DOLED 10kV Insulation Testers
• Polarisation index*
• Dielectric absorption ratio*
• Live circuit warning
• Auto discharge
•Insulation test time interval up to 10 mins
• 20 Insulation test voltage
• Auto range
•OLED Display (Organic light-emitting diode - TIN7DOLED)
Technical Overview
TIN7D
CAT III
300V
Feature
Parameter
Accuracy
Insulation Test Voltage
500V, 10kV
(20 x 500V increments)
±5% + 1 Digit
Measuring Range
0-250GΩ, 800kΩ to 500gΩ
Output Power Limit
1W
Short Circuit Current (Max)
1.25mA
Dielectric Absorption Ratio
Yes
R @ 1 min
Polarisation Index
Yes
R @ 1 min
Model Specification
Power Source
8 x 1.5V C Batteries Alkaline
Certificates
EN61010-1, EN61326-1. Certificate of Conformance
* Polarisation and dielectric ratio are useful to schedule maintenance. The user can keep record of the PI and
DAR results and analyse these over time. Maintenance can be done according to analysis and down time can be
scheduled thus saving production time.
TIN7DOLED
CAT III
300V
TIN8D 15kV
• Insulation test voltage up to 15kV
• Test insulation resistance up to 2 TΩ
(2000GΩ)
• Short circuit current up to 5mA
• Auto hold function to freeze
the reading
• Overload protection
• 30 insulation test voltages
• Adjustment for testing time (duration)
: 1~30 minutes
• Software included
• USB to RS-232 data transmission.
• 200 Measurement results can be
saved and recalled on the display
Technical Overview
Feature
Parameter
Accuracy
Insulation Test Voltage
500V, 15kV
(500V increments)
±5% + 5 Digit
Measuring Range
70GΩ/0.5kV 70GΩ at 0.5kV - 2TΩ
at 15kV
Short Circuit Current (Max)
Up to 5mA
Dielectric Absorption Ratio
Yes
Polarisation Index
Yes
Model Specification
CAT IV
40
600V
Power Source
Rechargeable Battery with AC charge
Certificates
UL, IEC61010-1. Certificate of Conformance
Instruments
1.0
PSC Loop Testers
T1825 - PSC Loop Tester
• Load/No load tester
•Prospective short circuit current
• Volt drop test
•Micro processor controlled
•Test up to 100A (6kA) circuit breakers
• 3-Phase system test
• Designed to SANS 10142
Technical Overview
Feature
Parameter
Accuracy
Measuring:Loop
:PSC
0 ~ 2000Ω
0 ~ 6kA @230V (L-n)
±12% + 5 Digit
Operating Voltage (VAC)
50 ~275V AC 50 or 60Hz
6KA @ 230V AC
TEST CURRENT
- Loop/PSC/Load
12A (Load Voltage shown as @ 16A)
Resolution (ohm)
0.01 (Loop)
Thermal Protection
Electronic
PSC Current
600kA @ 230V AC
±2% (0.05 ~ 50Ω), ±3% (500Ω), ±15% (above 500Ω)
(L-N) Max
±2% (0.05 ~ 50Ω), ±3% (500Ω), ±15% (above 500Ω)
Operating Temperature
-10 to 40˚C
Humidity
85% Max relative humidity
Model Specification
LIFETIME WARRANTY
CAT III
300V
Power Source
8 x 1.5V AA Batteries
Standard Accessories
Carry Case, Strap, Leads
Certificates
UL, IEC61010-1. Certificate of Conformance
T1826 - PSC Loop Tester
• Fault finding
• Electrical network analyser
• Earth resistance without peg
• Analyse to SANS 10142
• Loop test for L-E, L-N and PSC
Technical Overview
Feature
Parameter
Accuracy
Measuring:Loop
:PSC
0 ~ 2000Ω
0 ~ 6kA @ 230V AC
± 5% ± 2 Digit
Operating Voltage (VAC)
230V ± 20V 50Hz
± 2%
TEST CURRENT - Loop/PSC/Load
11.76A
Neutral Wire Resistance
0.01 - 2000Ω
Live Wire Resistance
0.01 - 2000Ω
PSC Current (L-N)
Max 6kA @ 230V AC
PSC Current (L-E)
Max 6kA @ 230V AC
Operating Temperature
-10˚C to 40˚C
Humidity
80% Max Relative humidity
± 12% + 5 Digit
Model Specification
LIFETIME WARRANTY
CAT III
300V
Power Source
8 x 1.5V AA Batteries
Standard Accessories
Carry Case, Strap, Leads
Certificates
UL, IEC61010-1. Certificate of Conformance IEC61326-1
T1125
• Load/No load tester
•PSC (Prospective short circuit current)
•Safety voltmeter protection
•Micro processor controlled
•Test up to 100A (6kA) circuit breakers
•Each phase tested separately on
a 3-Phase system
• Designed to SANS 10142
Technical Overview
Measuring:Loop
:PSC
0 ~ 2000Ω
0 ~ 6ka @230v (L-n)
Operating Voltage (VAC)
50 ~275V AC 50 or 60Hz
TEST CURRENT - Loop/PSC/Load
12A (Load Voltage shown as @ 16A
Resolution (ohm)
0.01 (Loop)
Thermal Protection
Electronic
Accuracy Voltages
±1% (210 ~ 250V)
Accuracy Loop
±2% (0.05 ~ 50Ω), ±3% (500Ω), ±15% (above 500Ω)
Operating Temperature
0 to 40˚C
Humidity
85%
Model Specification
CAT III
300V
Power Source
8 x 1.5V AA Batteries
Certificates
UL, IEC61010-1. Certificate of Conformance
41
Instruments
1.0
Loop, ELCB and Polarity Testers
TIMP57
Accessory for measuring and recording the efficiency of single-phase and
3-Phase multi-string systems
• Line Loop Adaptor
• Test up to 400kA
Technical Overview
Instruments listed below are to be used in conjunction with
the TIMP57 in order to do high line loop tests up to 400kA
MACROG3
T419
T60
Type of measurement
P-N, P-P, P-PE Loop/Line impedance and short circuit current calculation
Resolution of ohms
0.1mΩ(Zloop) ; 1A (Ipsc)
Test current
approx: 200A
Frequency range
50Hz ±5%
Short Circuit Current (Max)
1.25mA
Dielectric Absorption Ratio
R @ 1 min
Polarisation Index
R @ 10 min
Model Specification
Power Source
8 x 1.5V C Batteries
Standard Accessories
2 Test Cables (3m length, with Alligator Clips), RS-232 Serial Cable, Carrying Bag
Certificates
ISO9000 Calibration Certificate, Certificate of Conformance
TEL2SC
• ELCB Tester/Polarity
• Taut band movement
• Wiring check
• Robust
•
Two and three wire operation
• Designed to SANS 10142
Technical Overview
Feature
Parameter
Accuracy
Operating Voltage
550
550Vac @ ±15%
ELCB current
10mA - 50mA
30A ±3 %
+ 5 Digit 0.01A
Frequency of Operation
50/60Hz
Voltage (L-E)
1% (1mA)
Meter
±1% of full scale
Operator Temperature
-5˚C to 45˚C
Fuse Protected
0.1A Fast Blow
Model Specification
Power Source
No batteries requiRed
Certificates
Certificate of Conformance
TEL28
• Industrial ELCB
•
Micro-processor
•
Direct read out of time/current
•
Voltage measurement
•
Suitable for industrial, mining and
domestic environments
•
Each phase tested separately on a
3-Phase system industrial, mining and
domestic environments
• Designed to SANS 10142
Technical Overview
LIFETIME WARRANTY
CAT III
42
450V
Feature
Parameter
Accuracy
Rated tripping current
0 to 1000mA
± 1mA
Resolution
1mA
Operating Voltage (L-E)
100 to 450V AC
50 - 50V AC 2% ± 1V 350 - 450V AC
Maximum Trip Time
100 secs (1mS resolution)
1mS ± 1mS 5% ± 1V
Operating Temperature
-50ºC to 40ºC
Operating Humidity
80%
Phase Angle Setting
0 and 180º selectable
Model Specification
Power Source
8 x 1.5V AA Batteries Alkaline
Certificates
Certificate of Conformance EN 0081-1. EN 50082-1
Instruments
1.0
ELCB and Polarity Testers
T1812
• Automatic data hold function
• Zero crossing testing at 0º or 180º
• Disconnection phase polarity
•Polarity trip indicator (positive or
negative phase)
• Wiring polarity indicator
•Measures voltage and frequency
between line and earth before testing
Technical Overview
LIFETIME WARRANTY
CAT III
240V
Feature
Parameter
Accuracy
Rated Tripping Current
3mA - 500mA
5% ± 1mA
Operating Voltage (L-E)
20V AC to 280V AC
2% ± 1V AC
Maximum Trip Time
3secs (1mS resolution)
2% ± 2mS
Operating Temperature
-5ºC to 45ºC
Operating Humidity
80%
Phase Angle Setting
0º or 180º
Model Specification
Power Source
8 x 1.5V AA Batteries Alkaline
Certificates
Certificate of Conformance EN 61326-1
TELE10L
• Industrial ELCB
• Micro processor
•
Fully programmable (Direct readout - time or current)
• Voltage measured during test
Technical Overview
Feature
Parameter
Accuracy
Rated Tripping Current
0-1000mA at 317 Volts
±1% reading ±2 digits
Lowest Resolution
1mA to 10ms
Operating Voltage
380, 550V
Maximum Trip Time
99.99 secs
Operating Temperature
0ºC to 40ºC
Operating Humidity
80%
1% reading ±1 digit
Model Specification
LIFETIME WARRANTY
Power Source
6 x 1.5V C Batteries Alkaline
Certificates
Certificate of Conformance
T4137
• Digital Milliohm Meter
• Four terminal measurement
• Large LCD display
•
Robust lightweight case with
O-ring seal
• Bonding tests
• Earth continuity testing
• Designed to SANS 10142
Technical Overview
Feature
Range
Resistance Ranges
0 to 200Ω in steps of 100µΩ
0 to 2000mΩ in steps of 1Ω
0 to 20Ω in steps of 10Ω
0 to 200Ω in steps of 100mΩ
Test Current
1mA = 2000Ω range
10mA = 200Ω range
100mA = 2000mΩ range
Maximum Output Voltage
380/550 volts
Test Current Accuracy
±0.1%
Accuracy
±0.5% of reading ±2 digits
Model Specification
Power Source
12V DC battery poweRed, 8 x 1.5V C Batteries Alkaline
Standard Accessories
Test Leads, Shoulder Belt
Certificates
Certificate of Conformance
43
Instruments
1.0
ELCB and Polarity Testers
TEL11 and TEL11OLED
TEL11 ELCB/Phase Rotation Tester and TEL11OLED ELCB/Phase
Rotation Tester
• 3-Phase presence
• 3-Phase rotation
• TEST for disconnection sensitivity
• TEST for disconnection time
• Select one of 3-Phase to test ELCB
• Measure voltage phase to Earth
• Over temperature protection
• Phase polarity trip indicator
TEL11
LIFETIME WARRANTY
Technical Overview
Feature
Parameter
Current Settings
999mAac/50Hz
Phase-start-selection
0°C and 180°C
Operating Voltage (L-E)
60Vac to 317Vac (525V System)
Timer Resolution
1mS (Max Time = 99.99s)
Current Resolution
1mA
Voltmeter Resolution
1V
Earth Leakage Constant Current IAC
5 to 999 (mA) @50Hz
Ramping Current
5 to 999 (mA)
Sensitivity Disconnection Check
5 to 999 (mA)
Time Delay Disconnection Check(s)
0.001 - 99.999
Maximum Current Consumption
10mA
ELCB Voltage Measurement (L-E) (V AC)
10 to 330V
ELCB Tester Voltage Present (VELCB)
LED
ELCB Fuse (Slow Blow)
1.5A
Model Specification
TEL11OLED
LIFETIME WARRANTY
Power Source
8 x 1.5V C Batteries Alkaline
Standard Accessories
Test Leads x 2 (terminate own plug)
Certificates
Certificate of Conformance
TEL1TLB
•Socket
• ELCB Tester/Polarity
•
Live on earth indication (LCD Display)
•Identifies 6 wiring conditions
•
Earth tripping function
•
Floating earth detection
•
Ready-board compatible
•
LCD displays a floating earth when wiring is incorrect and brass knob is touched
• Designed to SANS 10142
Technical Overview
44
Rated Tripping Current
10, 15, 20, 25, 30, 35mA
Resolution
5mA
Operation Voltage
220V
Instruments
1.0
ELCB and Phase Rotation Testers
TIMT
• Line Insulation Monitor Tester
• Testing of IT supply systems from high impedance transformers
• Test between earth reference and phase with output connections for a multimeter
•
Test Insulation monitoring alarm by adjusting the potentiometer to verify the audio
and visual indication
Application video
Line 1
Blue
Line 2
Red
Voltage
output points
for multimeter
V+
Earth
0-10kΩ
V+
Potentiometer to
test audio & visual
http://www.hellermanntyton.co.za/downloads.html
Plug conFiguration
Earth Reference
±115V
±115V
±230V
Blue OFF Red
Phase selection switch
Line 2
Red
Line 1
Blue
T890
• 3-Phase Detector (Non-contact)
•
Clamps over wire insulation without contact on conductor
•
Non-contact sensor clips
•
Open phase and phase sequence
•
Magnets on back of unit to mount on metal surfaces
Technical Overview
Operating Voltage
150 to 1000VAC
Operating Frequency
45 to 65Hz
Circuit Structure
Electronic
Operating Temperature
-10ºC to 50ºC
Humidity
80%
Power Source
4 x 1.5 AA Batteries
Current Consumption
15mA
Cable Length
Approx 800mm
Model Specification
CAT III
1000V
Standard Accessories
Carry Pouch
Certificates
UL, IEC61010-1. Certificate of Conformance
T855
• 3-Phase Rotation Indicator
• Fused test leads
• Rotating disc
• Colour coded Red/white/Blue
• Large alligator clips
• Real motor behaviour
Technical Overview
Operating Voltage
90 - 600 VAC
Operating Frequency
50/60 Hz
Operating Temperature
-10ºC to 40ºC at 80%
Humidity
Max relative humidity
Cable Length
1.1m each of Red (R), White (S) and Blue (T)
Model Specification
Standard Accessories
Carry Pouch
Certificates
Certificate of Conformance
45
Instruments
1.0
Phase Rotation Testers
T860
• 3-Phase and Motor Rotation Indicator
• Test rotation of unconnected motors
• Heavy duty alligator clips
• Open phase identification
• Phase presence
• Colour coded: Red/White/ Blue
Technical Overview
Operating Voltage
100 to 600VAC
Operating Frequency
45 to 75Hz
Circuit Structure
Electronic
Operating Temperature
0ºC to 50ºC at 90º
Humidity
Max relative Humidity
Power Consumption
(Correct)
±14mA for motor rotation field test
±7mA for Phase rotation field indication
Model Specification
LIFETIME WARRANTY
Standard Accessories
Carry Pouch
Certificates
Certificate of Conformance
T887
• 3-Phase Rotation LCD Indicator
• Phase rotation and phase presence
• Colour coded Red/White/Blue
• Large alligator clips
Technical Overview
Operating Voltage
40 - 700 VAC
Operating Frequency
50/60 Hz
Operating Temperature
-1ºC to 55ºC
Humidity
Not in full sunlight
Cable Length
60cm each of Red( R), White (S) and Blue (T)
Model Specification
LIFETIME WARRANTY
46
Standard Accessories
Carry Pouch
Certificates
Certificate of Conformance
Instruments
1.0
Miscellaneous, Voltage and Phase Rotation Testers
T70
• Phase Sequence Indicator and Voltage Detector
• Detection AC voltage
• Phase sequence and conformity test with 1 wire method
• With or without contact measurements
• LED Red and buzzer indication
• Practical pen clip
• Clamp voltage detectors together
Application video
Incorrect phase sequence
http://www.hellermanntyton.co.za/downloads.html
Technical Overview
Correct phase sequence
CAT IV
1000V
Operating Voltage
1000V to 1000V
Frequency
50/60 Hz
Certificate
IEC/EN61010-1
T475
• Volt/Current Tracer
• Detect current through shielded/armoured cable
• Adjustable sensitivity
•Non-contact
• Visual and Audio
Technical Overview
Voltage Detection
5V ~1000V AC
Current Sensitivity
>100mA
Frequency Range
50 to 500Hz
Operating Temperature
-10°C to 50°C
Operating Humidity
<80 %RH
Model Specification
Power Source
4 x 1.5V LR44 Batteries
T534
• Circuit Breaker Identifier
• Tracing plug sockets to circuit breakers
• Battery check
• Signal strength buzzer
• Calibrate funtion by moving receiver across circuit breakers
• Wiring indications
Technical Overview
Operating Voltage
200 - 250 V AC
Frequency
47 - 63Hz
Duty Cycle
10µs
Transmitter Power
Wall Socket
Receiver Power
1 x 9V Battery
Model Specification
Power Source
TX: 1 x 9V Battery, RX: Mains
Certificates
Certificate of Conformance
47
Instruments
1.0
Voltage Testers and Surge Protection
T180 Tone and Probe Kit
•
With tone generator and amplifier probe
• Sensitivity control
• Alligator clips and RJ11 connector
• Single or dual alternating tone
• Use on de-energised circuits
Technical Overview
Tone Generator
Amplifier Probe
Waveform
Square Ware
Frequency
±1.13kHz
Amplitude
9V P-P
Over voltage Protection
±100V
Frequency Detection
1-12kHz
Receiver distance
50-60cm
Sensitivity Control
√
Model Specification
Power Source
Probe: 1 x 9V Battery, Tone: 1 x 9V Battery
Standard Accessories
Carry Pouch
Certificate
Certificate of Conformance
T45200/T45000
• Neon Screwdrivers
100mm
65mm
Code
Size
T45200
100mm
T45000
65mm
Technical Overview
Operating Voltage
TSP1A Surge Plug Top (Green)
120 - 250 V AC
Surge Plugs
• High surge handling capability
• Incorrect power socket wiring detection
• Economical secondary protection
• Thermal and over-current fusing
• Visual fault indication
• Differential and common mode protection
• 2 Year warranty
TSP1AF Surge Plug Top (Red)
Flat Pin
Technical Overview
Rated Voltage
230V/50Hz
Max Continuous
Operating Voltage
275V AC
Max Continuous Current
16A
Max Surge Current
8kA
Fusing
Integrated 104ºC Thermal and 16A over current fuse
Temperature Range
-10°C to 70°C
Model Specification
48
Certificates
SANS 164-0 Approval
Standards Compliance
IEC 61643-1
Instruments
1.0
Voltage Testers
TS500
• Non-contact voltage detection
• Audio/visual/vibration indication
• Polarity check
• Microwave leakage
Technical Overview
Operating Voltage
70 - 600V AC
Model Specification
Power Source
4 x 1.5V LR44 Batteries T515BATT
TLVD15
• Non-contact voltage detection
• LED and tone indication
• Flashlight
Technical Overview
Operating Voltage
50V - 1000V AC
Frequency
50 - 500Hz
Model Specification
CAT III
600V
Power Source
2 x AAA 1.5V Batteries
Certificates
EN:61010-1, EN:61326-1
TLVD17
• Non-contact voltage detection
• Sensitivity adjustable
• LED and tone indication
• Identifies live and neutral
Technical Overview
Operating Voltage
5V - 1000V AC
Frequency
50 - 500Hz
Model Specification
CAT IV
1000V
Power Source
1 x AAA 1.5V Battery
Certificates
CE EN:61010-1, EN:61326-1
49
Instruments
1.0
Voltage Testers
WIBRETEST
• Industrial Heavy Duty
• AC/DC
• Neon Indication (Green, Red)
• Polarity
• Oil resistant
Technical Overview
Operating Voltage
110 - 750V AC/DC
Model Specification
CAT IV
300V
Power Source
No Batteries
Optional Accessories
Wibreneon (spare neon optional)
WIBRE1000
• Dust and waterproof
• AC/DC
•IP65
• LED indicators
• Polarity
• Oil resistant
Technical Overview
Voltage Range
110V, 230V, 380V, 690V, 1000V AC/DC
Model Specification
CAT IV
1000V
Power Source
No Batteries
Certificates
IP65, IEC61243-3, DIN/VDE 0682-401
TBT69
•Industrial
• Polarity LED indicators
• Electric field detection
• LCD display
• RCD (ELCB) tripping (30mA)
• Continuity
• Attached red probe with screw-on 4mm test tip
Technical Overview
Voltage Range
6V,12V, 24V, 50V, 120V, 230V, 400V, 690V, 1000V
Transient protection
8kV
Model Specification
CAT III
50
1000V
Power Source
No Batteries
Certificates
IEC61010-1
Instruments
1.0
Voltage Testers
DUSPOLA
• Analogue Plus
• Dust and waterproof
• Vibration
• Phase sequence
• LED indicators
• Solenoid movement
• Polarity test
Technical Overview
Operating Voltage
ACV 12 ~ 1000V, DCV 12 ~ 1000V
Model Specification
CAT III
1000V
Power Source
No Batteries
Certificates
IP65, 61243-3:2011-02
DUSPOLE
• Expert
• Dust and waterproof
• Vibration
• Phase sequence
• Continuity with buzzer
• LED indicators
• Measuring point illumination
• Polarity test
Technical Overview
Operating Voltage
ACV 12 ~ 1000V, DCV 12 ~ 1000V
Model Specification
CAT III
1000V
Power Source
2 x 1.5V AAA Batteries
Certificates
IP65, 61243-3:2011-02
TCV6
• Voltage Tester
• Dust and waterproof
• Voltage indication with LED
Technical Overview
Operating Voltage
6V, 12V, 50V, 110V, 230V, 415V AC/DC
Model Specification
CAT III
600V
Power Source
2 x 1.5V AAA Batteries
Certificates
IP66, IEC61010-1 , 61243-3:2011-02
51
Instruments
1.0
Compliance Testers - Selection Guide
ELECTRIC SAFETY MEASUREMENTS
PAGE
MACROG3
T419
T60
53
53
53
True RMS
•
•
•
Insulation with voltage 50, 100, 250, 500, 1000V DC
•
•
•
Continuity of protective conductors with 200mA / 10A
•
•
•
200mA
Only A, AC
general and
selective
200mA
Tripping time and current of RCDs type B, A, AC Standard, Selective
and Delayed up to 1A
Tripping time and current of earth leakage relaystype B, A, AC Standard,
Selective and Delayed up to 10A
•***
Non-trip earth resistance
•
Earth resistance with rods
Earth resistance with stakeless testing method
•***
•
•
•
•
•**
•**
Ground resistivity by 4-wire method
•
Loop/Line impedance, Phase-Phase, Phase-Neutral, Phase-PE
•
•
•
•
Loop/Line impedance Phase-Phase, Phase-Neutral, Phase-PE with high
resolution (0.1mΩ)
•*
•*
•*
Measurement of percentage voltage drop on the line
•
Contact Voltage
•
•
•
Phase Sequence
•
•
•
Leakage current with optional clamp meter
•
•
•
•
POWER ANALYSIS
Measurement of Voltage, Current, Active, Reactive, Apparent Power
(1)
•
Measurement of Cosphi, Power Factor
(1)
•
25th
•
Voltage and current harmonics up to the 49th with calculation of THD%
ADDITIONAL CHARACTERISTICS
Safety category
CAT III
240V
Automatic test (Ra, RCD, Insulation)
Measurement of environmental parameters (°C, °CF, %RH, Lux)
CAT III
240V
•
•*
CAT III
300V
•
*+
Test with remote lead PR400
•
•
•
Help on screen display
•
•
•
Internal memory for measured data saving
•
•
•
Optical/USB serial port for PC connection
•
•
•
222 x 16 2x 57
222 x 162 x 57
222 x 162 x 57
Weight (batteries included) Kg
1.2kg
1.2kg
1.2kg
Reference standard for safety
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
50
50
50
Integrated WiFi connection and compatibility with HTANALYSIS App
Size (L x W x H) mm
IP degree
* Optional accessory TIMP57
** Optional accessory clamp T2100
*** Optional accessory RCDX10
(1) Single-phase or balanced three-phase system
+
Optional accessory HT52/05
52
•
•
Instruments
1.0
Compliance Testers
MACROG3 (23kA L-N) (40kA L-L)
Advanced multifunction device for verification of electric safety of domestic
and industrial electric systems (IEC/EN61557-1)
• Compliance Tester
•Earth resistance by voltammetric method with 2 or 3 poles in TT, TN and IT systems,
non-trip earth resistance measurement and earth resistance with stakeless testing
method with clamp meter T2100 (optional). Ground resistivity
•Measurement of electric parameters in single-phase installations
(V, I, W, VAR, VA, PF)
•Test of RCDs type A, AC, B up to 1A, earth leakage relays with test current up to
10A (with optional accessory RCDX10)
•Measurement of insulation resistance
• Touch-screen colour
Application video
Model Specification
http://www.hellermanntyton.co.za/downloads.html
CAT III
Power Source
6 x 1.2V type AA rechargeable batteries, 6 x 1.5V type AA alkaline batteries
Standard Accessories
3 Terminal cable with SHUKO plug, Set of 4 cables + 4 alligator clips + 2 test leads,
TEARTHKIT - Set of 4 cables + 4 metal earth probes, Carrying bag, Windows
software + optical/USB cable, PR400 - Switch probe, External battery charger
Optional Accessories
USB Cable T2100 Earth Clamp
Certificates
Calibration certificate ISO9000, Certificate of Conformance
TRMS
240V
T419 (23kA L-N) (40kA L-L)
Multifunction device for tests on domestic and industrial systems
• Compliance Tester
• Continuity of protective conductors with 200mA
• Insulation with 50, 100, 250, 500, 1000VDC
•Loop/Line impedance P-N, P-P, P-PE also with high resolution (0.1mΩ) with optional
accessory IMP57
• Non-trip earth resistance
• Phase sequence rotation
• Memory storage of results
• Optical/USB interface for PC connection
• Global Earth Resistance
Application video
Model Specification
http://www.hellermanntyton.co.za/downloads.html
TRMS
CAT III
240V
Power Source
6 x 1.5V batteries type AA
Standard Accessories
Test leads, Carry case, English Instruction Manual
Optional Accessories
TOPVIEW Software and USB Cable
Certificates
IEC/EN61010-1. IEC/EN61557-1-2-3-4-6-7, Calibration Certificate ISO9000,
Certificate of Conformance
T60 Compliance/3-Phase Power Analyser
•
•
•
•
•
•
•
•
•
•
•
•
Application video
362 Parameters over 2 months
Voltage anomalies (sags and swells)
Real-time display of wave forms
Earth resistance 2 or pole
4 pole soil resistivity method
RCD type testing, A, AC, B up to 10A
Insulation resistance up to 1000V
Advanced loop testing of MCBs
WiFi connectivity
Power factor
THD (Total Harmonic Distortou) 49th Harmonic
Verification of phase sequence and leakage currents
Model Specification
http://www.hellermanntyton.co.za/downloads.html
CAT IV
TRMS
300V
Power Source
6 x 1.2V (rechargeable) AA or 6 x 1.5V AA batteries or 10W power supply
Standard Accessories
HTFLEX33E 4pcs 3000A AC flexable clamps 174mm, C2033X - 3 Banana to
shuko plug cable, UNIVERSALKITG3 - Set of 4 cables, KITTERRNE - 4 earth rods
and cables in bag, PR400 - Remote switch , PR400 - Stylus, BORA2051 - Soft
carry bag, TOPVIEW 2006 - PC softwre & optical-USB connection cable, Hands
free kit
Certificates
IP 40. EN61010-1, EN61326-1, EN61557-1-2-3-4-5-6-7-10, EN50160, EN60909-0
53
Instruments
1.0
Power Analyser - Selection Guide
MAIN MEASUREMENTS
T824
T78
TPQA820
PAGE
55
55
55
AC/DC voltage in single-phase/three-phase systems
•
•
•
AC/DC current in single-phase/three-phase systems
•
•
•
Cosphi, Power Factor
•
•
•
Voltage unbalance (NEG%, ZERO%)
•
•
•
Active, reactive, apparent power/energy and DC power
•
•
•
Voltage and current harmonics up to the 49th with THD%
•
•
•
Voltage anomalies (dips, peaks) with 10ms resolution (@ 50Hz)
•
•
•
Voltage fast transients (spikes) with 5μs resolution
•
Electric motor starting current (INRUSH)
•
Voltage flickers (Pst, Plt)
•
Phase sequence
•
•
•
Neutral-Ground Voltage
•
•
Neutral current
•
•
•
MEMORY AND RECORDING
Max number of simultaneously selectable parameters
251
251
383
Recording with selectable integration period
1s-60n
1s-60n
5s-60s
Indicative memory duration
(in days @ PI=10min @ max number of parameters)
90 days
90 days
30 days
Indication of recording duration
•
•
•*
50MB
15MB
8MB
External compact flash card
•
•
Default and custom recording
•
•
Saving instant sampled value
•
•
•*
Summary table of main electric parameters
•
•
•*
Voltage/current waveforms
•
•
•*
Tables or histograms of Harmonics and THD%
•
•
•*
Voltage/current vector diagram
•
•
•*
Internal memory capacity
REAL-TIME DISPLAY
ADDITIONAL CHARACTERISTICS
Safety category
CAT IV
600V
CAT IV
600V
CAT IV
300V
Measurement with use of external CT and VT (with optional accessory HT903
•
•
Touchscreen colour display
•
•
Power supply and rechargeable battery recharging
•
•
Auto Power Off (APO)
•
•
•
USB port for data download onto Pen Drive
•
•
Only PC
USB
USB
WiFi/USB
Context help active on each screen
•
•
Protection password on recording
•
•
235 x 165 x 75
235 x 165 x 75
255 x 200 x 115
1
1
0.7
Provided PC interface with software for Windows
Size (L x W x H) mm
Weight (batteries included) Kg
Reference standard for power quality
Reference standard for safety
*Through App HTANALYSIS
**Adapter ACONBIN necessary
54
EN50160
EN50160
IEC/EN61010-1
IEC/EN61010-1
•**
Auto power
supplied
IEC/EN61010-1
Instruments
1.0
Power Analysers
T824
• 3-Phase Power Quality Analyser and Recorder
•Simultaneous measurement of power parameters on single-phase
and 3-Phase 3-wire and 4-wire systems
• 5 Input channels for voltages and 4 input channels for currents
• Numerical and graphic display (waveforms)
• Recording of voltage anomalies (dips, peaks) with 10ms resolution
Model Specification
TRMS
CAT III
600V
Power Source
1 x 3.7V rechargeable Lithium-Ion battery, with external adapter,
duration >3h, auto power off after 5 minutes’ idling
Certificates
UL, IEC61010-1. Certificate of Conformance
T78
• 3-Phase Power Quality Analysers
•251 Simultaneous parameters on single-phase and 3-Phase 3-wire
and 4-wire systems
• 5 Input channels for voltages and 4 input channels for currents
• Numerical and graphic display (waveforms)
• Recording of voltage anomalies (dips, peaks) with 10ms resolution
• Up to 49 Harmonic power factor
• Colour touch-screen
Application video
http://www.hellermanntyton.co.za/downloads.html
Model Specification
TRMS
CAT III
600V
Power Source
1 x 3.7V rechargeable Lithium-Ion battery, with external adapter,
duration >3h, auto power off after 5 minutes’ idling
Certificates
UL, IEC61010-1. Certificate of Conformance
TPQA820
iPad Mini (Wi-Fi only
supplied with product)
• 3-Phase and single-phase power quality analysers
• WiFi
• Max 415 between inputs
• AC TRMS voltage in single-/3-Phase systems
• AC TRMS current in single-/3-Phase systems
• Vibration
• Calculation and recording of voltage/current THD%
• iPad Mini
Application video
http://www.hellermanntyton.co.za/downloads.html
Model Specification
TRMS
CAT IV
300V
Power Source
Rechargable Lithium-Ion battery
External Power Source
100 ÷ 415V, 50/60Hz
Operating Temperature
0 to 40°C
PC interface
USB 2.0 and WiFi
Certificates
IP65, IEC61010-1. Certificate of Conformance
55
Instruments
1.0
Power Analyser Accessories- Selection Guide
ACCESSORY
T824
T78
TPQA820
PAGE
55
55
55
TOPVIEW2007
PC Windows software + USB cable
•
•
•
BORSA2051
Soft carrying bag for device/accessories
O
O
A0055
External power supply AC/DC
•
•
KITMPPACC
Set of 4 alligator clips for AC voltage
•
KITMPPACW
Set of 4 cables for AC voltage 2m
•
TKIT800
Set of 5 cables, black, Red, green, Blue and brown with alligator
clips
•
•
606-IECN
Connector with magnetic terminal
O
O
ACONBIN
Adapter for connection standard clamps
HTFLEX33E
Flex 3000A AC clamp, max diameter of cable 174mm
•
O
•
•
TFLEX33L
Flex 1000A AC clamp, diameter 174mm
•
HTFLEX35
Flex 3000A AC clamp, max diameter of cable 274mm
O
O
O**
HT96U
Standard AC clamp 1-100-1000A/1V, diameter 54mm
O
O
O*
HP30D1
Standard DC clamp 1000A/1V, diameter 83mm
O
O
O*
HT4005K
Standard AC 200A/1V clamp, diameter 40mm
O
O
O*
HT4005N
Transducer AC 5A-100A/1V
O
O
O*
O Optional
*
Adapter ACONBIN necessary
** Max measurement 1000A AC
56
Instruments
1.0
Photovoltaic Instrument - Selection Guide
MAINTENANCE AND EFFICIENCY
OF THE PHOTOVOLTAIC SYSTEM
PAGE
SOLARIV
IV500
SOLAR300N
PVCHECK
61
61
62
62
Continuity of protective conductors with 200mA
•
Insulation measurement with test voltage 250, 500,
1000V DC with no service interruption
•
I-V Curve measurement on single module or string
•
VOC and ISC measurement on single module
or string
•
Single-Phase and Three-Phase efficiency
measurement
•
1MPPT
1MPPT
DC side ef ciency of the photovoltaic field
•
•
Use of remote unit SOLAR02 with
USB \ RF connection
RF
USB
Measurement of irradiation with reference cell
•
•
•
•
Temperature measurement of cell and environment
•
•
•
•
RF
POWER QUALITY ANALYSIS
AC/DC voltage in single-phase/three-phase systems
•
DC
AC/DC current in single-phase/three-phase systems
•
Cosphi, Power Factor
•
Voltage unbalance (NEG%, ZERO%)
•
Power/Energy: Active P, Reactive Q, Apparent S
Only active P
•
Voltage and current harmonics up to the
49th with THD%
•
Voltage anomalies (dips, peaks) with
10ms resolution (@ 50Hz)
•
Voltage fast transients (spikes) with
5μs resolution (200kHz)
•
Electric motor starting current (INRUSH)
•
Voltage flickers (Pst, Plt)
•
Full analysis according to EN50160
•
Phase sequence
•
Neutral-Ground Voltage
•
Neutral current
•
DC
Only active P
MEMORY AND RECORDING
Internal memory capacity
Recording with selectable integration period
Indicative memory duration
(in days @ PI=10min @ max number of parameters)
249 curves I-V
8 days@
PI =10 min
15MB
90 days@
PI =10 min
999
Locations
5s-60m
5s-60m
5s-60m
8
90
249 curves I-V
Indication of recording duration for power quality
analysis
•
Internal memory extension with Compact Flash card
•
Default and custom recordings
•
REAL-TIME DISPLAY
Summary table of main electric parameters
•
•
•
Voltage/current waveforms
•
Tables or histograms of Harmonics and THD%
•
Voltage/current vector diagram
•
•
57
Instruments
1.0
Photovoltaic Instrument - Selection Guide
ADDITIONAL CHARACTERISTICS
SOLARIV
1500V/ 10A
1000V/ 15A
Measuring range of I-V Curve / IVCK
Measuring range for efficiency measurement
IV500
SOLAR300N
1500V/ 10A
1000V/ 15A
1000V AC-DC
3000A
1000V DC/ 265V AC
Safety category
CAT III
300
PVCHECK
1000V/15A
only VOC
and ISC
CAT III
300
CAT IV
Touchscreen colour display
600
CAT III
300
•
LCD display with backlight
•
•
PC interface with software for Windows
•
•
Integrated WiFi interface
•
•
Custom management of internal PV module
database
•
•
•
USB port for data download onto Pen Drive
•
•
•
•
Power supply with rechargeable battery and battery
charger
•
Auto Power Off (APO)
•
Indication of recording duration for efficiency
measurement
•
•
•
•
•
Reference standard for Power Quality Analysis
EN50160
On display help
Size (L x W x H) mm
•
•
•
•
235 x 165 x 75
235 x 165 x 75
235 x 165 x 75
235 x 165 x 75
Weight (batteries included) kg
1.2
1.2
1
1.2
Reference standard for safety
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
IEC/EN61010-1
Solutions for Performance and Troubleshooting
Troubleshooting
If system efficiency is lower than
expected, it is necessary to detect the
defective modules so that they can
be replaced. This can be achieved by
measuring the I-V curve with devices
SOLARIV and IV500.
Commissioning Tests
When operating a photovoltaic system, it
is necessary to certify its safety according
to IEC62446. The suitable device to carry
out these verifications is PVCHECK.
COMBINER
BOX
DC
Performance
System performance monitoring it is
possible to detect production loss quickly
and efficiently. SOLAR300N and SOLARIV
can record the energy production of a
system and the inverter performance
check over time thus preventing
unneccessary maintenance.
INVERTER
LOADS
AC
Kwh
Kwh
W/m2
ºC
SOLARIV
IV500
58
PVCHECK
SOLAR300N
SOLARIV
Three-phase
Single-phase
M
A
I
N
S
Instruments
1.0
Photovoltaic Instrument Accessories - Selection Guide
ACCESSORY
SOLARIV
IV500
SOLAR300N
PVCHECK
61
61
62
62
TOPVIEW2006
TOPVIEW2007
TOPVIEW2006
PT300N PT1000 probe
for PV module temperature
•
•
O
SOLAR02
Remote unit for Irradiation
and Temperature
•
O
•
O
KITGSC4 Set of 4 cables
+ 4 alligator clips
•
•
•
KITPVMC3 - KITPCMC3
Set of 2 adapters
with connectors MC3
KITPVMC3
KITPVMC3
KITPCMC3
KITPVMC4 - KITPCMC4
Set of 2 adapters with
connectors MC4
KITPVMC4
KITPVMC4
KITPVMC4
PAGE
TOPVIEW2006
TOPVIEW2007
PC Windows software
+ USB/ optical cable
TKIT800
Set of 5 cables
+ 5 alligator clips
•
A0055
External power supply AC/
DC battery charger 230V
50/60Hz
•
PT400
Touch-screen pen
•
HT304N
Sensor for irradiation
measurement
•
•
M304
Mechanical inclinometer
•
•
HT4004N
Standard 10-100A DC
clamp, diameter 32mm
•
•
O
O
•
O Optional
59
Instruments
1.0
Photovoltaic Instrument - Selection Guide
ACCESSORY
SOLARIV
IV500
SOLAR300N
PVCHECK
PAGE
61
61
62
62
HT4005K
Standard 200A AC clamp,
diameter 40mm
•
•
C2007
USB cable
•
BORSA2051
Soft carrying bag
•
VA500
Rigid carrying case
•
HT97U
Standard clamp 10-100-1000A
AC, diameter 54mm
O
HTFLEX33E
Flex 3000A AC clamp,
diameter 174mm
HP30D1
Standard 1000A DC clamp,
diameter 83mm
•
•
O
O
O
O
HP30C3
Standard 3000A AC clamp,
diameter 70mm
O
HP30C2
Standard 200-2000A AC
clamp, diameter 70mm
O
606IECN
Magnetic connectors
for voltage measurement
O Optional
60
O
O
O
Instruments
1.0
Photovoltaic Instruments
SOLARIV
Device for tests and maintenance of single-phase installations
• Measurement of efficiency of a single-phase photovoltaic system
• Measurement of I-V Curve of a module or of a string
• Measurement of open-circuit voltage and of short-circuit current Voc/Isc
• Database of 30 000 selectable photovoltaic modules
• Measurement of PV module/string output voltage up to 1500V DC
• Measurement of PV module/string current up to 10A DC
• Measurement of resistance of series Rs of panels
• DC/AC TRMS single-phase voltage
• DC/AC TRMS single-phase current
• * Measuring a IV curve via remote synchronisation of irradiation and temperature. Refer to IV500.
Model Specification
CAT III
300V
Power Source
6 x 1.5V AA Alkaline batteries
PT300N
ºC
M
A
I
N
S
W/m2
AC
kWh
HT304N
PT300N
INVERTER
LOADS
DC
kWh
W/m2
ºC
SOLAR02
RF Synchro
SOLARIV
SOLARIV
Measuring of curve IV with environmental sensors
Measuring single-phase efficiency with remote environmental sensors
IV500
Device for maintenance and troubleshooting
•Measurement of open-circuit voltage and of short-circuit Vos/Isc
• Measurement of PV module/string output voltage up to 1500V DC
• Measurement of PV module/string output current up to 10A DC
• Direct comparison with reference conditions (STC - 1000Wm2 25°C)
• Internal memory for data saving
Model Specification
Power Source
CAT III
6 x 1.5V AA Alkaline batteries
300V
HT304N
PT300N
ºC
HT304N
PT300N
W/m2
ºC
W/m2
SOLARIV
RF Synchro
IV500
* Measuring a IV curve via remote synchronisation of irradiation and temperature
IV500
Measuring of curve IV with environmental sensors
61
Instruments
1.0
Photovoltaic Instruments
SOLAR300N
Device for vertification of single-phase and 3-Phase PV system efficiency and
power quality analysis in compliance with standard EN50160
CAT III
LOADS
INVERTER
AC
M
A
I
N
S
kWh
600V
•Verification of the efficiency of photovoltaic system
• Analysis of power quality and energy consumption
• DC/AC TRMS voltage (single-phase and 3-Phase)
• DC/AC current (single-phase and 3-Phase)
• DC/AC active power (single-phase and 3-Phase)
• Power factor cosj (single-phase and 3-Phase)
• Solar radiation
• Panel and environment temperature
• Display of testing result (OK/NOT OK)
• Remote unit SOLAR02 for measuring irradiation and temperature
• Periodic recording of power parameters with programmable PI
• Analysis of recordings
• Voltage anomalies and spikes
HT304N
PT300N
DC
kWh
W/m2
ºC
SOLAR02
Synchronised
with SOLAR300N
SOLAR300N
Connection diagram 3-Phase System
PVCHECK and PVCHECK PRO
Device for commissioning tests of electric safety and performance
SOLAR02
Automatic test in a sequence of:
•Measurement of insulation up to 1000VDC
•Open-circuit voltage and short-circuit current Voc/Isc
•Continuity of protection conductors with 200mA
• Internal memory and USB output for PC Connection
• Efficiency measurements of the photovoltaic system
• Efficiency measurement of the photovoltaic field (DC side)
Model Specification
Power Source
HT304N
CAT III
300V
6 x 1.5V AA Alkaline Batteries
PVCHECK PRO
Code
Description
SOLAR02
Remote unit to record irradiation and temperature
HT304N
Kit of 5 cables + alligator clips for voltage measurement Sensor for irradiation measurement
PT300N
Probe PT1000 for panel temperature
HT304N
LOADS
M
A
I
N
S
kWh
PT300N
INVERTER
kWh
W/m2
SOLAR02
Earth
PVCHECK
“Whole photovoltaic field“ insulation measurement method
62
PVCHECK
Measuring efficiency of photovoltaic field
RF Connection
ºC
Instruments
1.0
Calibrators
T8051
• Process Calibrator
• Generation of output voltage signal with amplitude up to 10VDC
• Voltage measurement up to 10VDC
• Generation of output current signal with amplitude up to 24mADC
• Current measurement up to 24mAVDC
• Current measurement under percentage format (4-20mA)
• Adjustment selector with high sensitivity
• Up to 3 available automatic ramp selection
Technical Overview
DC voltage (generated and measured)
Range
0.01mV ÷ 10V
Resolution
0.01mV ÷ 0.001V
Accuracy
±(0.02%rdg + 4dgt)
Protection
30VDC
DC current (generated and measured)
Range
I0.001mA ÷ 24mA
Percentage
-25% ÷ 125%
Resolution
0.001mA
Accuracy
±(0.02%rdg + 4dgt)
Protection
30mADC
DC voltage (generated and measured)
Slower linear ramp
from 0% 100% 0% in 40s
Faster Linear ramp
from 0% 100% 0% in 15s
Step ramp
from 0% 100% 0% in steps of 25% with rampsof 5s each
Model Specification
Test Leads, Alligator Clips, Protection Rubber Holster, Lithium-Ion Rechargeable
Battery, External Adapter, User Manual, Carrying Case
Standard Accessories
T123
• Process Calibrator
• Only for sourcing and not for input voltages
Technical Overview
Output
Measuring
Range
Output Range
Resolution
Accuracy
Remark
100mV
1000mV
10V
-10.000mV to
110.000mV
-100mV to 1100mV
-1.0000 to 11.0000V
1µV
10µV
0.1mV
0.02 + 0.01
0.02 + 0.01
0.02 + 0.01
Max ouput current:
0.5mA Max ouput current: 2mA
Max ouput current: 5mA
DCA
20mA
0.000mA to 22.000mA
1µA
0.02 + 0.02
Max load 1kΩ at 20mA
Resitance
400Ω
4kΩ
40kΩ
0.00Ω to 400.00Ω
0.0000kΩ to 4.0000kΩ
0.000kΩ to 40.000kΩ
0.01Ω
0.1Ω
1Ω
0.02 + 0.02 Current 0.5 to 3mA
0.05 + 0.025 Current 0.05 to 0.3mA
Current 0.01mA
0.1 + 0.1
-0ºC to 1767ºC
-0ºC to 1767ºC
600ºC to 1820ºC
-200ºC to 1000ºC
-200ºC to 1372ºC
-200ºC to 1200ºC
-250ºC to 400ºC
-200ºC to 1300ºC
1ºC
1ºC
1ºC
0.1ºC
0.1ºC
0.1ºC
0.1ºC
0.1ºC
1.5ºC
1.5ºC
1.5ºC
0.6ºC
0.6ºC
0.6ºC
0.6ºC
1.0ºC
ITS-90 temperature scale:
The accuracy does not
include the error of
internal temperature
compensation caused by
a sensor
Temperature scale ITS-90.
Current varies from 0.5
to 3mA. Does not inculde
lead resistance
DCV
R
S
B
E
Temperature
K
J
T
N
RTD
PT100-385
PT200-385
PT500-385
PT1000-385
-200ºC to 800ºC
-200ºC to 630ºC
-200ºC to 630ºC
-200ºC to 630ºC
0.1ºC
0.1ºC
0.1ºC
0.1ºC
0.3ºC
0.8ºC
0.4ºC
0.2ºC
Frequency
100Hz
1kHz
10kHz
100khz
1Hz to 110.00Hz
0.100kHz to 1.10kHz
1.0kHz to 11.0kHz
10kHz to 110kHz
0.01Hz
1Hz
0.1kHz
2kHz
2 count
2 count
2 count
2 count
Pulse
100Hz
1kHz
10kHz
1 to 100000 cycles
1 to 100000 cycles
1 to 100000 cycles
1 cycle
1 cycle
1 cycle
2 count
2 count
2 count
Switch
100Hz to
100kHz
1Hz to 110kHz
0.1Hz to
2kHz
5 count
Model Specification
Power Source
Output voltage 1 to
11Vp-p
Amplitue accuracy 5%
+ 0.5V
Max load > 100kΩ
Duty cycle 50%
Max open/close voltage
28V and 50mA
1 x 9V Battery
63
Instruments
1.0
Test Leads
T02AS
T8040LEAD
•
Universal
• Suitable for all testers with 4mm terminals
•Budget test lead set with probe and crocodile clips
• Silicon based
•
Universal
• Suitable for all Toptronic and Fluke 70 series
•Budget test leads
TAL24
TAL25
•
Universal
• Suitable for all DMM’s
• 2mm Probe tip
• PVC test leads
• C/W crocodile clips
• Screw on crocks
•
Universal
• Suitable for all DMM’s
• 4mm Probe tip
• PVC test leads
• C/W crocodile clips
•Slide on crocks
CAT IV
600V
TALTBM
TAL35RBK
• Silicone
• IEC61010-1
• Ideal for TBM SEE PG 13-18 meters
• Silicone
• General Multimeter use
• Double insulated Silicone wire (1m)
•
Spring-shrouded 4mm brass caged
banana probe tips
• Shrouded right-angle connector
• IEC1010
CAT IV
64
1000V
CAT III
1000V
Instruments
1.0
Test Leads
TALTIN
TAL1825
• Double insulated silicone wire (1.2m)
•
Used for TIN insulation testers
TIN4D - SEE PG 38
TIN5D - SEE PG 39
TIN6A - SEE PG 39
TIN6D - SEE PG 39
TIN7D- SEE PG 40
•Accessories
•
Short length to reduce resistance
with loop test
• Used for loop testers
T1825 - SEE PG 41
TAL30CRBK
TAL38CRBK
•Accessories
• Wide grip crocodile clip with integral finger guard
• Suitable for use with TAL35RBK test leads
• Compatible with 4mm male leads
•Accessories
• Wide grip crocodile clips with integral finger guard
• Suitable for all 4mm male leads
• Suitable for use with TAL39RBK test leads
TAL30ARBK
TAL39RBK
• Silicone
• Double insulated silicone wire (1m)
• Wide grip crocodile clips with integral finger guard
• IEC1010
• Straight shroud terminations
• Silicone
• Double insulated silicone wire (1.2m)
• Straight shroud terminations both sides
CAT III
1000V
65
Instruments
1.0
Test Leads
TKPS54BK /TKPS54RD
TEARTHKIT
•Accessories
•
Flexible shaft with twin pointed gripping jaws
Colour:
RD - Red
BK - Black
• Compatible with 4mm male leads
•
Used for earthing testers
T416 - SEE PG 31
MACROG3- SEE PG 53
T60 - SEE PG 53
TAL36
TAL36L
• Wide grip alligator clips with 35mm spring mouth
• PVC insulated wire
• For 3-wire earth resistance test
• Wide grip alligator clips with 35mm spring mouth
• PVC insulated wire
Colour
Size
Red
15m
Colour
Size
YELLOW
10m
Red
30m
BLACK
10m
YELLOW
20m
GREEN
5m
GREEN
5m
TELEWR50F
• 4mm Brass banana plug
• Soft PVC insulated wire
• 50m braided copper wires
Accessories
66
Earth bar, Alligator clip
Instruments
1.0
Cable Avoidance Detectors
VSCAN
•Compass (cable avoidance detector)
• Self-test and calibration verification
• Metal cover locating mode
• Lithium ion rechargeable batteries
• Internal or external GPS
• Rotary control for sensitivity
• Depth and current measurement (configurable)
•Bluetooth
• 1 Watt
•33kHz and 131kHz simultaneously applied by direct connection,
induction or optional induction clamp
VSCANM
•Cable avoidance detector
• Self-test and calibration verification
• Metal cover locating mode
• Lithium ion rechargeable batteries
• Rotary control for sensitivity
• Depth and current measurement (configurable)
•33kHz and 131kHz simultaneously applied by direct connection,
induction or optional induction clamp
LPC - Live Plug Connector
The LPC separation filter is used to inject and locate frequency into a live cable via a
domestic power socket to trace the services from the building to the connection in
the street. Between 100 V AC and 250 V AAC
67
Instruments
1.0
Cable Route Tracers
CAT4PLUS
The C.A.T4 Avoidance ModeTM searches for power, radio and Genny4 signals, and
pinpoint located utilities, in a single scan. The bargraph ‘tidemark’ enables the user to
quickly spot and zero-in on a buried conductor.
• Cable And Pipe Locator
• eCert™ – remote calibration validation to form part of an annual service regime
• Avoidance instrument, not cable fault locator
•Provides four functions, audio and visual indication and depth estimation in
genny mode
• Signal strength indicator
• Mode/clockface indicator
The Genny4 transmits a specialised small diameter Locate frequency which facilitates
location of utilities such as telecoms and street lighting, including spurs. C.A.T4’s
Dynamic Overload Protection feature automatically filters out high levels of interference,
eg. electrically noisy areas such as substations and under high-voltage cables.
Avoidance ModeTM
Avoidance Mode speeds the process of pre-digital scanning by searching for power,
radio and Genny signals simultaneously.
RD7100
• Excavation of buried utilities easier and safer
• Simultaneous depth and current readout
• Dynamic overload protection
• Power filtersTM
•TrudepthTM
• Guidance mode
• Automatic usage-logging with GPS positioning
•ECERTTM - Remote calibration without downtime
• Ingress protection for tough environments (IP65)
Technical Overview
Sensitivity
Max depth
Dynamic Range
SL, DL, DLG, PL, PLG, TL and TLG
Depth in Power
PL, PLG
Model Specification
Power Source
Alkaline, NiMH or Li-Ion
Standard Accessories
TX-1, RX
VLOCPRO2
•
•
•
•
•
•
•
•
•
68
Rugged ABS and carbon fibre construction
IP54 rating for all weather use
Colour display
High speed dual core processor
Multiple location modes with compass orientation
Multiple frequencies (over 70 are pre-programmed)
Push button and continuous depth/current (feet or meters)
Rechargeable and alkaline battery packs
Combined GPS location with locate data (such as depth, current, etc.)
Instruments
1.0
High Voltage Testers
Telescopic Hot Stick - Ritz
VTT25F
VTT30F
•
•
•
•
•
•
• 7 Sections
• Suitable for voltage ranging 1 to 132kV
• Rubber hook latch
• Base cap for better stability
• Triangular design for easy operation
6 Sections
7.78m (25ft) Length when extended
Voltage range 1 to 132kV
Rubber hook latch
Base cap for better stability
Triangular design for easy operation
Model Specification
Model Specification
Length Extended
7.78m (25ft)
Length Extended
9.18m (30ft)
Standard Accessories
Heavy Duty Carry Bag
Standard Accessories
Heavy Duty Carry Bag
Certificates
Certificate of
Conformance
ASTM F 1826-00
specification
Certificates
Certificate of
Conformance
ASTM F 1826-00
specification
Telescopic Hot Stick - Hastings
C4031601 (SH250)
CSH230 (SH230)
• Voltage range 1 to 132kV
• Voltage range 1 to 132kV
Model Specification
Model Specification
Length Extended
7.62m (25ft)
Length Extended
9m (30ft)
Standard Accessories
Heavy Duty Carry Bag
Standard Accessories
Fuse Hook, Bag
Certificates
Calibration Certificate
Certificates
Calibration Certificate
T99FD Fuse disconnect included
69
Instruments
1.0
High Voltage Testers
Telescopic Hot Sticks
THS25F
THS30F
• Triangular - shaped design keeps sections aligned during extension and retraction
• Withstands voltage rating of 100kV from 30cm for 5min
• Universal end fitting
• Triangular - shaped design keeps sections aligned during extension and retraction
• Withstands voltage rating of 100kV from 30cm for 5min
• Universal end fitting
Model Specification
Model Specification
Length Extended
7.78m
Length Extended
9.18m
Standard Accessories
Disconected hook
and carry bag
Standard Accessories
Disconected hook
and carry bag
Sections
6
Sections
7
Certificates
IEC 62193
Certificates
IEC 62193
TPC7/11/22/33/44K
•High Voltage Phase Comparators/Live
Line Tester/Voltage Detector
• No user assembled parts
• Dual colour coded scale (%, Vac)
• Neon indicator lit when > 1200 Vac
•Measure and test phase to earth
phase to phase
• High quality fibreglass wound rod
•
•
•
•
•
•
•
Self powered operation - no battery
Current is limited to Milliampere
Grounded or ungrounded systems
Lightweight, robust and compact
High immunity to interference fields
Silcone handles
Specified by town councils
Technical Overview
ELECTRICAL
Model
TPC7K
TPC11K*
TPC22K
TPC33K*
TPC44K
System Voltage (kV)
6.6
11
22
33
44
Full Scale Voltage (kV)
8
12
24
36
48
Total Resistance (MΩ)
3.95
6.78
13.5
20.1
27
Response Time
1 Second
Neon Threshold
1.2 kV
MECHANICAL
Total Length (m)
1.105
1.105
1.225
1.375
1.525
Total Weight (kg)
1.2
1.2
1.3
1.4
1.5
Operating Temperature
-25˚C to 55˚C
Operating Humidity
20 to 96% RH
Standard Accessories
Carry Case, Instruction Manual, IEC Certificate
Optional Accessories
90˚ Bend TPCAA90
Certificates
IEC61481:200, IECSPE8561481
Note: * - Standard stock items.
TPCAA90 - 90º Angle bends for the TPC Series
(Optional Accessory)
70
Instruments
1.0
High Voltage Testers
WPC
• Series High Voltage Wireless Transmitter Receiver Phasing Comparator
WPC1000 - 11kV-33kV Voltage range (As shown on this page)
WPC3000 - 44kV-132kV Voltage range
• Wireless distance up to 200 metres
• All weather use (indoor or outdoor)
•Conductor is energised or de-energised to detect and indicate the correct phase
relationship between 2 enegised lines nominal voltage and frequency
• IN phase or OUT of phase
Technical Overview
Wireless Receiver
System Voltage (kV)
11 to 33kV
Threshold Range (kV)
1.3kV
Response Time
< 1 second
Spark Protection
The detector will not be damaged as a result of spark discharge
while making contact with the conductor under test
Bridging Protection
The comparator and its accessories will not cause flashover between live parts
of the installation or between live parts of the installation and earth/ground
Current Consumption
45 mA maximum
Range
30m in air
Visual Indicator
Transmitter - 2 x Red LED’s / Receiver - 1 x Red LED + 1 x Green LED
Audible Indicator
Buzzer present when IN Phase is indicated - > 65dB (5 metres)
MECHANICAL
Length(mm)
Diameter (mm)
Material
Y Electrode
35
40
Stainless steel
Hook
100
40
Stainless steel
Model Specification
Wireless Transmitter
Dimensions (mm)
180 (L) x 100mm (Dia.)
Weight
600g
Power Source
1 x 9V Battery
Standard Accessories
Carry case, Cleaning Kit, 2 x Rose Connector, 2 x Y Contact, 1 x Hook
Certificates
Certificate of Conformance IEC 61481
T1133HVD25E
• Designed for multi-voltage sites
• Covers systems voltage from 11kV to 33kV
Technical Overview
MODEL
T11338VD25E
System Voltage
11/33kV
Threshold Set within Range
1.65kV to 14.6kV
Response Time
<1 Sec
Auto-OFF
±3 Min
Bridging Protection
Yes
Spark Protection
Yes
Battery Low
<7V
Threshold
2.5kV
Battery Current
<30mA
Green = Armed
Yes
Red = V Detected
Yes
71
Instruments
1.0
High Voltage Testers
HVD
• High Voltage Detector
• Checks if HV system is alive or dead
• All weather use (indoor or outdoor)
ELECTRICAL
HVD13AC
HVD32AC
HVD33AC
System Voltage (kV)
6.6 to 132
11 to 33
44 to 132
2.5kV
2.5kV
10kV
Threshold Range (kV)
Non standard threshold voltages can be set outside the range to suit customers
requirements
Technical Overview
Spark Protection
The detector will not be damaged as a result of spark discharge
while making contact with the conductor under test
Bridging Protection
The detector and its accessories will not cause flashover between live parts of
the installation or between live parts of the installation and earth/ground
Current Consumption
30 mA maximum
Test Button
Tests and arms the detector when pressed and released
Visual Indicator (2Hz)
Red lamp (voltage present), green lamp (safe)
Audible Indicator
Buzzer - 3.1 kHz tone modulated at 2 Hz - 70 dB (1.5 metres)
Mechanical
Length(mm)
Diameter (mm)
Material
Y Electrode
35
40
Stainless steel
Standard Accessories
Carry bag, Cleaning kit, Rose Connector, Y Contact
THVD
• Contact Capacitive High Voltage Detector
•Self starting and automatically activated when the High Voltage is applied to the
contact electrode
• Use on sinusoidal (50 or 60Hz) High Voltage Systems
•Models are available to cover systems voltage from 6.6kV to 132kV
•IEC 61243-1 for voltages above 1kV 50/60Hz
• Check system is dead or alive
Technical Overview
LIFETIME WARRANTY
72
MODEL
T213HVD
T217HVD
T218HVD
T219HVD
T220HVD
T222HVD
System Voltage
11kV
11/33kV
6/22kV
44/132kV
6.6/132kV
11/44kV
Threshold Set within
Range
1.65kV to
4.4kV
3.3kV to
4.95kV
1.8kV to
2.7kV
6.6kV to
19.8kV
1.65kV to
14.6kV
4.4kV to
5.0kV
Response Time
<1 Sec
<1 Sec
<1 Sec
<1 Sec
<1 Sec
<1 Sec
Auto-OFF
±3 Min
±3 Min
±3 Min
±3 Min
±3 Min
±3 Min
Bridging Protection
Yes
Yes
Yes
Yes
Yes
Yes
Spark Protection
Yes
Yes
Yes
Yes
Yes
Yes
Battery Low
<7V
<7V
<7V
<7V
<7V
<7V
Threshold
3.02kV
4.12kV
2.5kV
13.2kV
2.5kV
4.75kV
Battery Current
<30mA
<30mA
<30mA
<30mA
<30mA
<30mA
Green = Armed
Yes
Yes
Yes
Yes
Yes
Yes
Red = V Detected
Yes
Yes
Yes
Yes
Yes
Yes
Instruments
1.0
High Voltage Testers and Automotive Testers
T175HP (High-Prox)
• Proximity Detector
• Non-contact high voltage detector
• Ten switch-selectable voltage sensitivity ranges
•Lightweight
• Audible and visual indication of live voltage
• Rose adaptor
• Check high frequency radiation
Technical Overview
Ranges
240V, 3.3kV, 6.6kV, 11kV, 22kV, 33kV, 66kV, 132kV, 275kV
Detection
Selection range is detected at approx. 25cm from the voltage
240V ±10cm, 33kV ±50cm
Self-Test
Selection
Indicators
Bright Red LED and buzzer
Model Specification
Power Source
3 x 1.5V C Batteries
Standard Accessories
Carry Pouch
Certificates
Certificate of Conformance
CBTL - Circuit Buddy 6 to 50
• Volt Test Light
•
Automotive industry
• Test for current on wiring, fuses etc
• Safe and easy to use, especially when piercing wire
• Use of LED’s instead of globes reduces the risk of damage to electronics
VOLTAGE RANGE 6-50V
WARNING
Not for use on circuits exceeding 50 Volts
CBSPK - Circuit Buddy Safety Probe Kit
(To be used with a digital multimeter)
•
Automotive industry
• Used with a standard multimeter
• Easy and safe to pierce wires
VOLTAGE RANGE 5A/50V
WARNING
Not for use on circuits exceeding 50 Volts.
When using a multimeter, voltages from
0-50V can be measured. 5A MAX Rating.
73
Instruments
1.0
Automotive Testers
T185
• LAN Tester
• LED Display
• Network cable testing (RJ45)
• Test any unenergised wire or cable
• Auto and manual scan function
• Lock status function
• Verify cable continuity, open, short circuit and miss-wired
• Buzzer sound warning for wire status
Model Specification
Power Source
1 x 9V Battery
Standard Accessories
RJ45 Cable, Case
Certificates
Certificate of Conformance
T5012
•Carcheck
• DC only
• Polarity (LED display)
• 3 - 48 Volts
74
Instruments
1.0
Tachometer Testers
T6236
• Digital Tachometer
• Low cost
• Photo/contact
• Removable contact head
• Backlit
•Memory Last/Max/Min value
Technical Overview
Measurement and Range
Photo: 2.5 to 999999 RPM
Contact: 0.5 to 19999 RPM
Surface Speeda (m/min): 0.01 to 99.99 m/min
ResolutionRPM
M/Min
0.1 (0.5 to 999.9 RPM)
0.01 (0.05 to 99.99 m/min)
Display
5 Digits, 18mm LCD
Accuracy
±(0.05% + 1 Digit)
Model Specification
LIFETIME WARRANTY
Power Source
4 x 1.5V AA Batteries
Standard Accessories
Reflecting Tape Marks (600mm), RPM Adaptor (cone), RPM Adaptor (Funnel)
Surface Speed Test Wheel
T2238
TAS35C
Surface Speed Test Wheel
TMTL35A
Metal Shaft of Cone
TAS35B
RPM Adaptor (Funnel)
• Digital Tachometer
• Photo/contact
• Microprocessor based
• High accuracy
• Variable LCD contrast
• Holds last reading/recalls max and min
Technical Overview
Measurement and Range
Photo: 5 to 99.999 RPM
Contact: 0.5 to 19.999 RPM
Surface Speed (m/min): m/min: 0.05 to 1999.9 m/min
ResolutionRPM
M/Min
0.1 (0.5 to 999.9 RPM)
1 RPM (≥ 1000 m/min), 0.01 m/min (< 100 m/min.)
Display
5 Digits, 18mm LCD
Accuracy
±(0.05% + 1 Digit)
Model Specification
TA535A
RPM Adaptor (Cone)
Power Source
4 x 1.5V AA Batteries
Standard Accessories
Carry Case, Reflecting Tape Marks (600mm), RPM Adaptor (cone)
RPM Adaptor (Funnel), Surface Speed Test Wheel
T8202
•Vibration
• Magnetic probe
• Sensing probe
Technical Overview
Feature
Parameter
Accuracy
Velocity
0.5 ~199.9mm/s
±5%+2 Digit @23 ±5°C
Acceleration
0.5 ~199.9m/s2
Frequency Range
10hz ~1khz
Min and Max Memory
Sampling Time
Approx.1 Second
Operating Temperature
0°C to 50°C
Operation Humidity
Model Specification
Power Source
4 x 1.5V AA Batteries
Standard Accessories
Cables with plugs, Sensing Probe, Magnetic Base, Carrying Case, Vibration Probe
Certificate
Certificate of Conformance
75
Instruments
1.0
Digital Timers
TDDT7
•
•
•
•
•
•
•
•
•
7 Day Digital Timer (Relay contacts)
Rated Voltage: 220 - 240V AC (50 - 60 Hz)
Relay contacts for various voltage ranges
Max 20A (3500 Watts) - resistive load (geysers, underfloor heating, lights)
Max 10A - inductive load (pool pump, aircon)
Day/Weekly 16 programmable settings
Din rail mounting
3 Year backup battery
LCD displays real time hour/minute - on/auto/off
Wiring diagram
Live In
Circuit
Breaker
Live In
Neutral
TIMER
Relay Output
N/C N/O COM
Live In (Volt Range: 1V to 250V AC)
Load Out (Max 20 Amps)
Additional Contact (Max 20 Amps)
Mounts on both
Din rail and mini rail
Certificates
IEC 60669-1, IEC 60669-2-2, IEC 60730-2-7, IEC 60730-1, RCC Certificate
TDDGT
•
•
•
•
•
•
•
•
7 Day Digital Geyser Timer (Internal relay)
Rated Voltage: 220 - 240V AC (50 - 60 Hz)
Max 20A (3500 Watts) - resistive load (geysers, underfloor heating, lights)
Max 10A - inductive load (pool pump, aircon)
Day/Weekly 16 programmable settings
Din rail mounting
3 Year backup battery
LCD displays real time hour/minute - on/auto/off
Wiring diagram
Live In
Geyser
Circuit
Breaker
Live In
Neutral
TIMER
Live
Load Out
Mounts on both
Din rail and mini rail
Certificates
IEC 60669-1, IEC 60669-2-2, IEC 60730-2-7, IEC 60730-1, RCC Certificate
TGTLC
• Day Digital Geyser Timer (Internal relay)
• Pre-programmed timer
• Rated voltage 220 - 240V AC (50 - 60HZ) internal relay contact
•Six preset times with peak demand lock out between
6:00 - 8:00AM and 18:00 - 20:00PM
•Override option up to 2 hours on any program selection including peak
demand if required
• 2 Program options out of peak demand
• Time and date preset + 2Hr GMT (South Africa)
• Weekend mode option
• Max 20A (3500 Watts) (resistive loads geysers)
• 1 Year backup battery
• Time limit drift under 3 min/year
• Din rail mounted
• Mini rail adaptor (DINADAPT)
• Electrostatic, Electromagnetic field immunity certification
Inside Lid
76
Certificates
IEC 60730-2-7, 60730-1; 60669-1, 60669-2-2 / RCC Certificate
Instruments
1.0
Digital Timers
TDT7
• Digital 3 Pin Socket
• Ideal for household use
• Backup rechargeable battery
• 8 Group programmable
• 3500 Watt / 16 Amps
Certificates
IEC 60730
TMT2
• 24 Hour Mechanical 3 Pin Socket
• Ideal for household use
• User friendly
• 15 Minute increment adjustment
• 3500 Watt / 16 Amps
Certificates
IEC 60730
TMDT2
• 24 Hour Mechanical Din Rail
• 15 Day battery back-up
• Ideal for household use in DBs
• 15 Minute increment adjustment
• 3500 Watt / 16 Amps
77
Instruments
1.0
Thermometer - Selection Guide
FEATURE
T3004
T8000
T500K
T502KJ
TIR9PEN
T306
T151
T685
79
80
80
81
81
81
82
82
Temperature Range
-27°C to
60°C
-100°C to
1300°C
-200°C to
1372°C
-200°C to
1370°C
-33°C to
500°C
-50°C to
700°C
-30°C to
650°C
-50°C to
1000°C
Probe/Sensor Type
Semiconductor
K
K
K, J
IR
IR
IR
IR
Single
Single
Dual
PAGE
Single/Dual Input
Data Hold
•
•
•
•
•
•
•
•
Min/Max Display
•
•
Max
•
•
•
•
•
0.1°C
0.1°C
0.1°C
0.1°C
0.1°C
0.1°C
0.1°C
0.1°C
•
•
•
•
•
•
•
•
Resolution
Backlight
High/Low Setting
•
Auto Power Off
(APO)
Temperature
Accuracy (°C)
•
•
•
•
•
•
•
•
±0.8°C
0.1°C
±0.1% to
2°C
±0.05% to
±0.7°C
±2°C or
±2%
±1.5°C to
±3°C
±1.5°C to
±2°C
±2°C to
±3°C or
±2%
Temperature Probes (Type K) - Selection Guide
Range ºC
-50-20 0 1002003009001000
1100
1200
1300
1400
TP01
TP02A
TP03
TP04
TP04L
* Refer to Instruments for full technical data
TP01 Bead probe
TP02A General purpose liquid probe
TP04 Surface contact probe
TP04L Surface contact probe
78
Instruments
1.0
Environmental Testers and Thermometers
T630
• Digital Luxmeter
• 0-200 000 Lux
• Data hold
• Max hold
• Backlit
Technical Overview
Display
31/2 Digit LCD Display
Ranges
20, 200, 2000, 20000, 200000 Lux
Resolution
0.01 Lux
Overange
OL display
Sampling Time
2.5 times/second
Sensor Material
Silicon Photodiode
Accuracy
±3% rdg + 10dgts
Operating Temperature 0 to 50ºC
Operating Humidity
< 70% RH
Model Specification
Weight
220g
Standard Accessories
Carry Pouch
Certificates
Certificate of Conformance
T325
• Sound Level Tester
•
Type 2 sound level meter
• Wide range
•
Sampling rate 2 seconds
• Bargraph
• Min/Max hold
•
Frequency weighting A/C
•
Over range indications
Technical Overview
Display
3.5 Digit with Bar Graph
Function
Fast (125mS)
Slow (1000mS)
Measurement Ranges
30dB to 130dB
Level ranges
Low 30dB to 80dB, Med 50dB to 100dB, Hi 80dB to 130dB
Display Update
2sec
Microphone
1/4inch (ECM)
Accuracy
±1.5dB @ 94dB of 1kHz
GENERAL
Output Impedance
Approx 100Ω
Operation Humidity
90% RH
Operation Temperature
0˚ to 40˚C
Model Specification
LIFETIME WARRANTY
Power Source
1 x 9V Battery
Standard Accessories
Screw Driver, Instruction Manual, Carry Case, Wind Shield
Certificates
Certificate of Conformance
T3004
• Humidity/Temperature Meter
• Data hold
• Min/Max
• REL function
• Auto power off
Technical Overview
Altitude
Up to 2000meters
Temperature
-20ºC to 60ºC
Humidity
0% RH ~ 100% RH
Resolution Temperature
0.1ºC / 0.1ºF
Resolution Humidity
0.1% RH
Response Time Humidity
180sec
Response Time Temperature
10sec
Operation Temperature
0ºC to 40ºC
Operation Humidity
<80% RH
Sampling Rate
2.5 times per second
Calibration
Internal calibration
RH Accuracy
±3% RH
Temp Accuracy ºC
±0.8ºC
Model Specification
Dimensions (mm)
240 (L) x 54 (W) x 34 (H)
79
Instruments
1.0
Environmental Testers and Thermometers
T4201
• Anemometer
• Low friction • Ball bearing design
• Data hold
•
4 Different speed units
Technical Overview
Measurement
Range
Resolution
m/s
0.4 – 30.0
0.1
km/h
1.4 – 108.0
0.1
Knots
0.8 – 58.3
0.1
Display
18mm LCD, 31/2 dgts
Accuracy
±(2% + 1 Digit) ≤ 25 m/s
Operating Temperature
0°C to 50°C
Dimensions
Sensor Head: Round 72mm Dia.
Operating Humidity
Max 90% RH, (0°C to 35°C)
Model Specification
Power Source
1 x 9V Battery
T8000
•Anemometer/Hygro/Lux/Temp
• Display LCD
• Auto power off
Technical Overview
AIR VELOCITY
Metres Per Second (m/s)
0.4 to 30.0 m/s
Kilometers Per Hour (Km/h)
1.4 to 108.0 km/h
Knots
0.8 to 58.3 Knots
Temperature
-100 to 1300°C
Light Intensity
0.2, 200, 1800, 20000 Lux
Humidity
10 to 95%Rh
Metres Per Second (m/s)
0.1 m/s
Kilometers Per Hour (Km/h)
0.1 km/h
Knots
0.1 Knots
Temperature Accuracy
0.1°C/0.1°CF
LIGHT INTENSITY
0, 2, 200 Lux
1 Lux
1800 to 20.000 Lux
10 Lux
HUMIDITY
10 to 95%Rh
0.1%RH
Operating Temperature
0 to 50 °C
Operation Humidity
80%RH Max
Model Specification
Weight
160g
T500K
•Professional Thermometer (Single Input)
•
K-type Thermocouple
• 0.1 °C resolution
• Hold function
• Max hold
• Backlit
• Relative zero button
Technical Overview
Feature
Temperature Range
Resolution
Parameter
-200°C to 1372°C
0.1°C/1°C
Model Specification
80
Power Source
4 x 1.5V AAA Batteries
Standard Accessories
Bead Probe
Accuracy
-200°C to 1372°C, ±0.1% + 2°C
-60°C to 1372°C, 0
.1% + 1°C
The accuracy specification does not include
the probe accuracy.
Instruments
1.0
Thermometers
T502KJ
•Professional Thermometer (Dual Input)
•
K-type and J-type Thermocouple
• Data hold
• Programmable
•
Temp1/Temp2 dual display
• High/low limit mode
• Relative mode
• Backlit
Technical Overview
Feature
Parameter
Accuracy
Temperature Range
Type K: -200°C to1370°C
Type J: -200°C to 1050°C
-50°C to 1370°C, ± 0.05%, + 0.7°C
-200°C to -50°C, 0
.05% + 0.3°C
The accuracy specification does not include
the probe accuracy.
Resolution
0.1°C/0.2°CF
Model Specification
Power Source
4 x 1.5V AAA Batteries
Standard Accessories
2 x Bead Probe
TIR9PEN
•
•
•
•
9:1 Infrared
Hold Max - Min display
Circular laser
Compact size
Technical Overview
Feature
Parameter
Accuracy
Temperature Range
-33°C to 500°C
±2% or 2°C
0.1°C
Resolution
-9.99°C to 199.9°C
Response Time
1.0 Second
Wavelength
8 to 14µm
Model Specification
Power Source
1 x 1.5 AA Battery
Certification
CE, RoHS
T306
• Non-contact Thermometer
• Laser pointer
•
Emissivity adjustable
•
Distance and spot D:S (Field of view) 12:1
• Max/Min/Average
•
High/Low temperature alarm setting
Technical Overview
NOTE:
Emissivity - is how infrared is
emitted off a particular surface e.g.
black is 1 and a very shiny surface
like chrome, glass is around 0.3
Feature
Parameter
Accuracy
Temperature Range
-50°C to 700°C /
-58°CF to 1292°CF
0°C~700°C ±1.5°C
-50°C to 0°C ±3°C
Resolution
0.1°C / 0.1°CF
Response Time
0.5 Second
Spectral Response
8 to 14µm Nominal
Emissivity Adj.
0.1 to 1
Relative Humidity
10~95%
Model Specification
Power Source
1 x 9V Battery
Standard Accessories
2 x Bead Probe
81
Instruments
1.0
Thermometers
T151
• 4-in-1 Non-contact IR Thermometer
•UV refrigerant leak detector
• Distance and spot size indicator
•
Coaxial laser in circle with scale indication of distance
and measured temperature area
• D:S (Field of view) 15:1
•
High and low alarms for measurements outside the limit
Technical Overview
Feature
Parameter
Accuracy
Temperature Range
-30°C to 650°C
≥-10°C to < 0°C ±2°C, ≥-0°C: ±1.5%
Resolution
0.1°C
Response Time
< 300mS
Spectral Response
8 to 14 µm Nominal
Emissivity Adj.
0.1 to 1
Co-efficient
±0.1°C
Model Specification
Power Source
3 x AA Batteries
T685
•High Temperature / Non-Contact
Thermometer
• Laser pointer
• Dual display
• Emissivity adjustable
• 10 Point memory
•Distance and spot
D:S (Field of View) 30:1
Technical Overview
Feature
NOTE:
Emissivity - is how infrared is
emitted off a particular surface e.g.
black is 1 and a very shiny surface
like chrome, glass is around 0.3
82
Parameter
Accuracy
Temperature Range
50°C to1000°C /
58°CF to 1832°CF
±3°C (±5°CF)
from -50°C to -20°C
±2°C (±3°CF)
from -20°C to -100°C
±2% from 100 to 1000ºC
Resolution
0.1°C / 0.1°CF
Response Time
0.5 Second
Repeatability
±1ºC or ±2ºF
Emissivity Adj.
0.1 to 1.0
Operating Temperature
0°C to 50°C 10-90% RH
Model Specification
Power Source
1 x 9V Battery
Instruments
1.0
Thermal Images - Selection Guide
FEATURE
THT45
TG301
THT60
TPK160
84
84
85
85
80 x 80
128 x 128
160 x 120
160 x 120
Temperature Range
-20°C to 350°C
-30°C to 650°C
-20°C to 400°C
-20°C to 350°C
Thermal Image Sensitivity
< 0.1°C at 30°C
150mK (0.1°C )
≤ 0.8°C at 30°C
0.8°C at 30°C
8 to 14µm
8 to 14µm
8 to 14µm
Type of IR Sensor
UFPA
IR-EXTM
(Integrated IR Array with
CMOS Sensor)
UFPA
Frequency
50Hz
8Hz
50Hz
33° x 33°
29.8° x 22.6°
24° x 32°
7.5mm
Fixed
PAGE
CHARACTERISTICS OF IR IMAGE
IR Sensor Resolution (Pixels)
Spectrum Range
CHARACTERISTICS OF IR AND INTEGRATED OPTICS
Field of view
Focal length of standard lens
17° x 17°
9mm
Interchangeable Optics
•
FUNCTIONS
Laser
Colour Palettes
Saved Image Format
•
Circular
•
4 Standard
3 Standard
8 Standard,
10 Custom Colours
6 Standard
JPEG, MPEG4
Bitmap
JPEG, MPEG4
JPG
•
•
Touch Screen
IP Rating
Shock/Vibrations
Hot/Cold Spot
IP50
IP50
IP65
IP54
25G/2G
50G/2.5G
25G/2G
25G/2G
Auto
Auto
83
Instruments
1.0
Thermal Imagers
THT45
• 80 x 80 Pixels
• Thermal IR camera
•PiP function
•Automatic detection of hot and cold spots
• Built-in laser pointer and illuminator
•3 Cursors: central, Min, Max
•Data saved to JPEG and MPEG4
Technical Overview
Application video
Temperature Range
-20°C to 350°C
Thermal Sensitivity
<0.1°C @ 30°C
Spectral Range
8 to 14µm
Image Frequency
50Hz
Digital Zoom
1x to 32x
IR Resolution
80 x 80 pixels
Colour Palettes
4 Standard
Integrated Photo Camera
1.3MP
Thermal Imaging Sensitivity
150mK
Thermal imaging Detector
IR UFPA
Field Of View
17° x 17°
Model Specification
http://www.hellermanntyton.co.za/downloads.html
Power Source
Lithium-Ion Rechargeable Battery, Battery Charger
Standard Accessories
Focal lens 9mm,universal plugs, Micro SD card 8GB, USB cable, Video
cable, Earphone set, Carry bag, Wrist strap, THTLink Windows software,
Quick reference guide, User manual on CD-ROM
Certifiation
ISO9000
TG301
•128 x 128 Pixels
• Thermal IR camera
•UV refrigerant detection
•30:1 distane to spot ratio
• Bright flashlight
• Circular laser
• 1.2m Drop proof
Technical Overview
Display
1.77” Colour TFT with 128 (H) x 160 (V) pixels
Temperature Range
-30°C to 650°C
Accuracy (Calibration geometry
with ambient temperature 23°C ±2°C)
≥0°C: ±1.5°C or ±1.5°C of reading, whichever is greater
Response Time (95%)
<125ms (95% reading) (8Hz)
Spectral Response
8 to 14µm
Emissivity
0.10 to 1.00
Temperature Coefficient
±0.1°C/°C or ±0.1%
Measurement Resolution
0.1°C
Repeatability (% of reading)
±8% of reading or ±1.0°C, whichever is greater
Thermal Imaging detector
IR-EXTM Technology
(Integrated IR Array Sensor with CMOS Sensor)
IR Resolution
16.384 pixels (128 x 128 pixels)
Field of View (H x W)
33° x 33°
Thermal Imaging Sensitivity
150mK
Colour Palettes
3 (Grey Scale, Hot Iron and Rainbow)
Save Image Format
Bitmap (BMP) Image with Temperature and Emmissivity
Battery Life
12 hours with laser and backlight on
Model Specification
Power Source
84
3 x AA IEC LR06 Batteries
Instruments
1.0
Thermal Imagers
THT60
•
•
•
•
•
•
•
•
160 x 120 Pixels
Thermal infrared camera
Touch screen 3.5” TFT
Micro-SD card and USB interface to PC
8 Standard + 10 custom colour palettes
Built in laser pointer and illuminator
PiP function
PAL/NTSC video out
Technical Overview
Temperature Range
-20°C to 400°C
Thermal Sensitivity
<0.08°C @ 30°C
Visual Range
(FOV) 29.8° x 22.6° (lens 7.5mm)
Spectral Range
8 to 14µm
IR Resolution
160 x 120 pixels
Colour Palettes
8 Standard, 10 Custom Colours
Therman Image Sensitivity
80mK at 30°, 50Hz
Digital Zoom
1x to 20x
Save File Format
JPEG, MPEG4
Integrated Photo Camera
60 x 480 pixels
Image Frequency
50Hz
Thermal Image Detector
IR UFPA
Model Specification
Power Source
2 x 7.4V Lithium-Ion Rechargeable Batteries
Standard Accessories
7.5mm lens and protection cover, AC/DC adapter + universal plugs,
Charger base, 4GB micro SD card and card reader, USB cable for PC
connection, RCA video output cable, Rubber support for LCD hood,
Rubber support for tripod, Earphone set, CD-ROM with THTLink
software, User manual, Hard carry case
Optional Lenses
RL1160-11mm, RL2260-22mm and RL3360-33mm
Certifiation
ISO9000
TPK160
• 160 x 120 Pixels
• Thermal imager
•Integrates tablet and thermal camera technology
•Communicate in real time, live image and video transmission
•WiFi/Bluetooth
•GPS
• Built in memory
• 8MP CCD digital camera
Technical Overview
Field 0f View
24º x 32º
Spatial Resolution
3.05mrad
Thermal Sensitivity
≤ 0.08°C at 30°C
Detector Resolution
160 x 120° pixels
Temperature Range
-20°C to 350°C
Focus
Fixed
Image Mode
IR , CCD
Visible Pixels
High Definition CCD, 8 Mega Pixel
Colour Palettes
6 Standards (Iron INV, Rainbow, Feather, Grey and Grey INV))
Display
5.5” HD Capacitive touch screen LCD
File Format
JPG
Measurement Functions
4 moveable spots , Auto hot/cold spot identification, Isothermal
analysis, circle analysis, rectangular analysis, line profile
Measurement Accuracy
±2ºC or ±2% of reading
IP Rating
IP54
Shock/Vibrations
25G/2G
APPS
Reporter Software Installed as Standard
Model Specification
Power Source
Battery charger
Standard Accessories
AC adaptor, USB cable, Headset, Wrist Strap, Software App (Installed on
the unit), Hard Carrying Case, Operational Manual /Calibration Report
85
Download PDF

advertising