Storing Preset Stations

Important Safety Instructions
1. Read these instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use the speaker near water.
6. Clean only with dry cloth.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
SPEAKER TO RAIN OR MOISTURE.
To reduce the risk of electrical shock, fire, etc.:
1.
Do not place unit near any heat source such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
2.
Do not block any ventilation openings of unit.
3.
The unit shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on the unit.
4.
Do not place any heavy loads onto the unit, and do not step on it, the load may fall and cause
serious injury to the unit.
5.
Please read Rating Labels at the back of unit for power input and other safety information.
6.
This unit is intended to be used only with the power supply provided.
7.
Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at any point where they exit from the unit.
8.
Never unplug your unit by pulling on the power cord. Always grasp the plug firmly and pull
straight out from the outlet.
9.
Repair or replace all electric service cords that have become frayed or otherwise damaged
immediately. Do not use a cord that shows cracks or abrasion damage along its length, the
plug, or the connector end.
10. To prevent fire or shock hazard, do not use this plug with an extension cord or other outlet
unless the blades can be fully inserted to prevent blade exposure.
11. To prevent fire or shock hazard, do not expose unit to rain or moisture.
12. During lightning or raining days, unplug the unit for additional protection during
thunderstorms or when the unit is not used for prolonged periods. This will prevent damage
to the unit from lightning and power surges.
13. Do not attempt to carry out any service work yourself. By opening or removing the cabinet,
you may be exposed to dangerous voltage or other hazards. Any service work should be
carried out by qualified technicians.
14. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit
switched on while unattended for long periods of time, e.g. overnight, while on holiday or
while out of the house. Switch it off and disconnect the mains plug from the mains socket.
2
Contents
Important Safety Instructions .......................................................................................................... 2
Contents.......................................................................................................................................... 3
Getting Started ................................................................................................................................ 5
Unit Top View .......................................................................................................................... 7
Unit Front View ........................................................................................................................ 8
Unit Back View......................................................................................................................... 8
Remote Control Overview........................................................................................................ 9
Setup Wizard ................................................................................................................................ 10
Internet Radio Mode ..................................................................................................................... 12
Local Country Stations........................................................................................................... 12
Selecting a station through Stations ...................................................................................... 12
Selecting a station through Podcasts .................................................................................... 13
Getting Access Code and FAQ Solutions .............................................................................. 13
Adding station to ‘My Favourites’ ........................................................................................... 14
Adding station to ‘My Added Stations’ ................................................................................... 14
Viewing Station Information ................................................................................................... 14
Storing Preset Stations .......................................................................................................... 14
Recalling a Preset Station ..................................................................................................... 15
Spotify Connect............................................................................................................................. 16
Using Spotify Connect ........................................................................................................... 16
Music player Mode ........................................................................................................................ 18
Setting up a Music Server...................................................................................................... 18
Sharing Media with Windows Media Player........................................................................... 18
Playing Shared Media............................................................................................................ 19
My Playlist.............................................................................................................................. 19
Repeat Play Mode ................................................................................................................. 19
Shuffle Play Mode.................................................................................................................. 19
Clearing My Playlist ............................................................................................................... 20
Prune Servers ........................................................................................................................ 20
Now Playing Information ........................................................................................................ 20
DAB Mode..................................................................................................................................... 21
Selecting DAB Mode.............................................................................................................. 21
Selecting another DAB/DAB+ Station .................................................................................... 21
Scanning Stations .................................................................................................................. 21
Manual Tune .......................................................................................................................... 22
Prune Invalid .......................................................................................................................... 22
DRC (Dynamic Range Control) value .................................................................................... 22
Changing Station Order ......................................................................................................... 23
Viewing Station Information ................................................................................................... 23
Storing Preset Stations .......................................................................................................... 24
Recalling a Preset Station ..................................................................................................... 24
FM Mode ....................................................................................................................................... 25
Selecting FM Mode ................................................................................................................ 25
3
Scan settings ......................................................................................................................... 25
Audio Settings........................................................................................................................ 25
Viewing Station Information ................................................................................................... 25
Storing Preset Stations .......................................................................................................... 26
Recalling a Preset Station ..................................................................................................... 26
Bluetooth Mode ............................................................................................................................. 27
NFC (Near Field Communication)................................................................................................. 27
Aux in Mode .................................................................................................................................. 28
Wireless Device Remote Control App........................................................................................... 29
App installation ...................................................................................................................... 29
‘MyDigitRadio’ App installation .............................................................................................. 29
Setting up the connection ...................................................................................................... 30
Starting the Navigation .......................................................................................................... 30
General Operation ........................................................................................................................ 31
Setting Sleep ......................................................................................................................... 31
Setting Alarm ......................................................................................................................... 31
Equaliser ................................................................................................................................ 31
Network Setup ....................................................................................................................... 32
Setting Time/Date .................................................................................................................. 32
Setting Language................................................................................................................... 34
Factory Reset ........................................................................................................................ 34
Software Update .................................................................................................................... 34
Setup Wizard ......................................................................................................................... 34
Viewing System Info .............................................................................................................. 35
Setting Backlight .................................................................................................................... 35
Specifications ................................................................................................................................ 36
4
Getting Started
Carefully remove your radio from the box. You may wish to store the packaging for future use.
What you can find inside of your package
!
Main unit
!
Power adapter
!
Remote control
!
Instruction manual
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
!
Where the radio will be exposed to direct sunlight.
!
Where the radio will be close to heat radiating sources.
!
Where the humidity is high and ventilation is poor.
!
Where it is dusty.
!
Where it is damp or there is a possibility of water dripping or splashing onto unit.
Before you can use your Internet Radio, you need to know following:
Wireless LAN Setting
"
A broadband Internet connection.
"
A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
"
If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi
Protected Access (WPA) data encryption then you need to know the WEP or WPA code so
you can get the Internet Radio to communicate with the network.
"
If your wireless network is configured for trusted stations you will need to enter the Radio’s
MAC address into your wireless access point. To find the Radio’s MAC address use menu
items as follows: Main menu > System settings > Network > View settings > MAC
address.
Before you continue, make sure that your wireless access point is powered up and connected to
your broadband Internet. To get this part of the system working, read the instructions supplied with
the wireless access point is highly recommended.
Adjusting the Antenna
Extend the antenna to ensure you receive the best reception possible in both DAB and FM radio
modes. It may be necessary to adjust the position of the radio and /or antenna to achieve the best
signal.
5
Using Headphones
You will require headphones fitted with a 3.5 mm diameter stereo plug. The Headphones socket
is located on the back of this unit. Headphones are not supplied with this radio.
Turn down the volume before connecting earphones. Slowly raise the volume with the earphones
on until you reach your desired level.
#
Note: long-term exposure to loud music may cause hearing damage. It is best to avoid
extreme volume when using earphones, especially for extended periods of time.
Turning the Unit On/Off
Connect the plug at the end of power adapter cable to the DC IN socket on the back of the unit.
Then insert the power adapter into the mains socket. Turn the mains power on and then press the
VOLUME/
knob to turn the unit on or standby. To switch the unit off completely, unplug the
power adapter from the mains socket.
Volume Control
Adjust the radio volume by turning VOLUME/
6
knob.
Unit Top View
1.
2.
7.
NFC sensor
Press to switch radio on or standby.
8.
Display
Turn to adjust volume.
9.
DAB/FM antenna
MODE button
10. BACK button
VOLUME/
knob
Press to switch among Internet, Spotify,
Music player, DAB, FM, Aux in and
3.
Press and hold to store preset station.
MENU button
Press to recall stored preset station.
screen.
button
Press to skip to previous track in Spotify,
Music player and Bluetooth modes.
Press and hold to fast reverse current
playing track in Music player and
Bluetooth modes.
5.
11. PRESET button
Bluetooth modes.
Press and hold to display or exit menu
4.
Press to return to previous menu screen.
button
12. INFO button
Press to browse station information.
13. ALARM button
Press to set alarm.
14. SLEEP button
Press to set sleep time.
15. MUTE button
Press to mute or resume sound.
16. SELECT/TUNE knob
Press to pause/play current playing track
Turn to browse options.
in Spotify, Music player and Bluetooth
Press to confirm selection.
modes.
6.
button
Press to skip to next track in Spotify,
Music player and Bluetooth modes.
Press and hold to fast forward current
playing track in Music player and
Bluetooth modes.
7
Unit Front View
1.
Speaker
2.
Display
Unit Back View
1.
DAB/FM antenna
2.
DC IN socket
3.
AUX IN socket
4.
8
Headphones socket
Remote Control Overview
1.
button
Press to switch radio on or standby.
2.
OK button
Press to confirm your selection.
3.
Navigation buttons
up
down
backward
forward
4.
VOL +/- buttons
Press to adjust volume.
5.
MENU button
Press to display menu or exit menu.
6.
MODE button
Press to switch among Internet, Spotify,
Music player, DAB, FM, Bluetooth and Aux
in modes.
7.
INFO button
Press to view station information.
8.
MUTE button
Press to mute or resume sound.
9.
SCAN button
Press to scan for DAB and FM stations.
10.
button
The way of replace batteries:
Press to skip to previous track in Spotify,
1. Open the battery compartment cover by
Music player and Bluetooth modes.
using your thumb downward push the
Press and hold to fast reverse current
bulge on the back of your remote control.
playing track in Music player and Bluetooth
modes.
2. Install two AAA new batteries referring to
the markings direction inside the battery
11.
button
compartment.
Press to skip to next track in Spotify, Music
#
Note: do not reverse any battery and
player and Bluetooth modes.
do not mix battery types, also do not
Press and hold to fast forward current
playing track in Music player and Bluetooth
mix old and new batteries. When
discard your old battery, please
considering eco-friendly.
3. Cover the battery compartment door.
modes.
12.
button
Press to pause/play current playing track in
Spotify, Music player and Bluetooth modes.
13. Preset buttons 1-10
Press and hold to store preset station.
Press to recall stored preset station
14. SLEEP button
Press to set sleep time.
15. SNOOZE button
Press to active snooze function.
9
Setup Wizard
1.
After setting the language, the display will show ‘Setup wizard’ screen.
2.
Press SELECT/TUNE knob to confirm ‘YES' to start setup. Options in the setup wizard
include the following:
Date/Time
Set 12 or 24 hour format
Auto update
"
Update from DAB
"
Update from FM
"
Update from Network
Select your time zone and daylight savings is needed.
"
No update
Set the date and time is needed.
Keep network connected
Select YES or NO
3.
The Wizard will now scan your location for accessible wireless networks. When the scan has
finished, a list of networks will be displayed.
Selecting wireless network
a.
If a WEP/WPA key (password) is required, radio will ask you to input the WEP/WPA
code and display the password entry screen as follows:
10
b.
Turn SELECT/TUNE knob to cycle through the alphanumeric character list, press
SELECT/TUNE knob to select an appointed character.
#
c.
Note: WEP/WPA pass codes are case-sensitive.
If a wrong operation is being conducted, select
to delete designated
character.
#
Note:
= Backspace;
means return to previous track; radio
will automatically save the WEP/WPA you’ve input, so no bother to re-enter these
codes.
d.
After selecting the final character of your password, turn SELECT/TUNE knob to
, and then press SELECT/TUNE knob to confirm. The radio is connected to
wireless network.
#
Note: If a password (WEP/WPA) isn’t required by your network, radio will connect to the network
automatically.
4.
Setup wizard completed, press SELECT/TUNE knob again to exit.
11
Internet Radio Mode
1.
The display will show 'Main menu' after 'Setup wizard' completed. Press SELECT/TUNE
knob to select Internet radio mode.
2.
While 'Station list' is highlighted, press SELECT/TUNE knob to confirm.
→
3.
Then refer following section to choice stations. Or if failed to connect to network, please
follow:
a. Check your Router, see it working normally or not;
b. Relocate your radio to a stronger signal position is necessary!
c. Make sure your password is correct input.
Local Country Stations
Local "Country" will change according to your current location. It displays local programs of your
current location.
1.
To enter Local stations, press MENU button > Station list > Local "Country", press
SELECT/TUNE knob to confirm.
→
2.
Turn SELECT/TUNE knob to select options, and then press SELECT/TUNE knob to confirm.
3.
Step by step to the program you desired.
Selecting a station through Stations
1.
Press MENU button > Station list > Stations, press SELECT/TUNE knob to confirm.
→
12
2.
In 'Stations' menu:
!
‘Location’ enables you to choose from the radio stations provided by any country which you
choose from a list.
a. While 'Location' is highlighted, press SELECT/TUNE knob to confirm.
b. Turn SELECT/TUNE knob to select the region you wanted, and then press
SELECT/TUNE knob to confirm.
c.
Using the same method to choose country, station in turn, radio will now loading.
‘Genre’ enables you to choose radio stations according to their content, for example Classic
!
Rock, Sport, News, etc.
!
‘Search stations’ enables you to enter all or part of station name to find a station.
!
‘Popular stations’ enables your radio to list the stations that have the most listeners.
!
‘New stations’ enables your radio to list the stations that have recently joined the Internet
radio network.
#
Note: Some radio stations do not broadcast 24 hours per day, and some stations are not always
on-line.
Selecting a station through Podcasts
1.
Press MENU button > Station list > Podcasts, press SELECT/TUNE knob to confirm.
→
2.
Turn SELECT/TUNE knob to select options, and then press SELECT/TUNE knob to confirm.
3.
Step by step to your purpose program.
Getting Access Code and FAQ Solutions
1.
To assess to this order, press MENU button > Station list > Help, press SELECT/TUNE
knob to confirm.
#
2.
Note:
at this step, you can also listening radio FAQ solutions.
When 'Get access code' is highlighted, press SELECT/TUNE knob to confirm, you will get it.
13
Adding station to ‘My Favourites’
1.
To register your radio with the portal: www.wifiradio-frontier. com.
2.
Create account login, enter Access code is required. Access code can be found from
“Station list > Help > Get access code".
3.
4.
You can add your favourite stations via the portal (www. wifiradio-frontier.com).
After you added the stations, in order to have your radio access your new settings, get your
radio power off for several minutes is necessary.
5.
The added stations are accessible by pressing MENU button > Station list > My favourites.
#
Note: doing a ‘factory reset’ cannot erase ‘my favourites stations’.
Adding station to ‘My Added Stations’
1.
Even though the Internet radio portal contains thousands of stations, you may want to listen
to stations not listed. You can add your own stations via the portal (www.
wifiradio-frontier.com).
2.
After you added the stations, in order to have your radio access your new settings, get your
radio power off for several minutes is necessary.
3.
The added stations are accessible by pressing MENU button > Station list > My added
stations.
#
Note: doing a ‘factory reset’ cannot erase ‘my added stations’’.
Viewing Station Information
Internet programs broadcast additional information. Press INFO button repeatedly, the display will
show the information through Station Description, Genre, Country, Reliability, Bit rate, Codec,
Sampling Rate, Playback Buffer and Date Info.
Storing Preset Stations
Your radio can store up to 10 of your favourite Internet stations.
1. While playing your favourite station, press and hold PRESET button on the main unit until
diaplay shows as below:
2. Turn SELECT/TUNE knob to cycle through the preset stations store numbers 1-10.
3. Select one preset station number and then press the SELECT/TUNE knob, display will show
‘Preset stored’.
4. Alternatively, press and hold one of Preset buttons 1-10 on the remote control until display
shows ‘Preset stored’.
14
5. Preset number ‘
#’ will show on the display.
Recalling a Preset Station
1.
Press PRESET button to show the saved preset stations.
2.
Turn SELECT/TUNE knob to select the preset station you want to play and then press the
SELECT/TUNE knob to confirm.
3.
Alternatively, press one of Preset buttons 1-10 on the remote control to play the preset
station.
15
Spotify Connect
Spotify gives you millions of songs at your fingertips. The artists you love, the latest hits and new
discoveries just for you.
With Spotify Connect feature, you can play and control all this music wirelessly. Choose music on
your smartphone or tablet, and listen on your radio.
Your radio has Spotify Connect built in. This lets you control the music playing on your radio using
the Spotify app on your smartphone or tablet.
Listening is seamless – you can take calls, play games, watch a video, even switch you phone off,
all without interrupting the music. It’s a better way to listen at home.
*For service availability in your country, check www.spotify.com
Using Spotify Connect
You’ll need a Spotify Premium account to enjoy instant access to million songs from the Spotify
archive, all at superior audio sampling rates.
If you don’t have it, just go to www.spotify.com/freetrial for your free 30-day trial.
How to use Spotify Connect
1.
Download Spotify app for your smartphone or tablet (iOS or Android).
2.
Connect your device to the same wifi network as your smartphone or tablet.
3.
Open the Spotify app on your smartphone or tablet, and play any song.
4.
Tap the square image of the song’s cover art in the bottom left of the screen. Then tap the
Connect icon
5.
.
Tap ‘DigitRadio 510’ from the list. If you can’t see it, just check it’s connected to the same wifi
network as your phone of tablet.
You will notice that your radio is currently listed as “DigitRadio
510 xxxxxxxxxxxx” (the 12 digit alphanumeric code is the
MAC address of your radio) in the Spotify App. If you would
like to change this name to something more personal (‘John’s
Sine IR’ for example), you can do so as follows:
a.
On the radio: Press MENU and select Main menu >
System settings > Network > View settings. Scroll
down and take a note of the ‘IP address’.
b.
On your computer: Ensure that your computer is on the
same network as the radio, then enter the IP address
into your browser’s address bar (example:
192.168.0.34). This will allow you to view some of the
radio’s diagnostics, but also change its name.
16
6.
The Connect icon will turn green to signify that DigitRadio 510 is now selected and being
used for audio playback.
7.
Your Spotify app will only recognise DigitRadio 510 when the radio is connected to the
internet (i.e. in Internet Radio, Spotify Connect or Music player modes). To use Spotify when
your radio is in non-internet modes (i.e. in DAB, FM, Bluetooth or Aux in modes) you need to
select Main menu > System settings > Network > Keep network connected > YES. This
also allows you to wake the radio from standby using your Spotify app.
#
Note: If unattended to use radio for long periods of time, e.g. overnight, while on holiday
or while out of the house, select NO to save power is recommended.
Controlling Spotify Connect
You can now control Spotify from the app like normal; search for and play your tracks, change the
volume and add to playlists even though playback is through DigitRadio 510. The next time you
open the Spotify app, playback will continue through DigitRadio 510.
Spotify Connect is a cloud-based service, therefore after activation on DigitRadio 510, your
smartphone or tablet no longer needs to be on the same wifi network to control audio playback.
Use another Spotify account with DigitRadio 510
Your Spotify account details are now stored on DigitRadio 510. To overwrite this with another
Spotify account, simply follow the activation steps again whilst running the Spotify app using your
desired account. Please remember that both your smartphone or tablet and DigitRadio 510 need
to be on the same wifi network for the overwriting to occur.
17
Music player Mode
Setting up a Music Server
"
In order for your radio play music files from a computer, the computer must be set up to share
files or media.
"
UPnP media sharing allows devices like this radio to play music from a shared media library,
navigating through tag menus such as Artist, Album or Genre.
"
If you are running a suitable server system such as a PC with Windows Media Player10 or
later (WMP), and your music library is well-tagged, then it is recommended to use media
sharing.
"
Only the UPnP server needs to be set up.
Sharing Media with Windows Media Player
The most common UPnP server is Windows Media Player (10 or later). Alternatively, other UPnP
platforms and servers may be used. To set up WMP for media sharing, perform the following
steps:
1.
Ensure that the PC is connected to the network.
2.
Ensure that the radio is powered on and connected to the same network.
3.
In WMP, add to the media library the audio files and folders you want to share with your radio
(Library > Add to Library…).
4.
In WMP, enable media sharing (Library > Media sharing…).
5.
Make sure that the radio has access to the shared media by selecting it and clicking Allow.
You can also set a name for the shared media in Settings… Click OK to close the dialogue
boxes.
6.
The PC is now ready to stream the music to the radio. The WMP UPnP service runs in the
background; there is no need to start WMP explicitly.
18
Playing Shared Media
1.
Press MODE button repeatedly to select Music player mode.
2.
While 'Shared media' is highlighted, press SELECT/TUNE knob to confirm, and then step by
step to your selecting music.
3.
When a track is playing, you can:
a. Press
button to skip to previous track; press and hold
button to fast reverse
current playing track.
b. Press
button to pause or play current playing track.
c. Press
button to skip to next track; press and hold
button to fast forward current
playing track.
My Playlist
The My Playlist feature enables you to create a playlist of your favourite tracks from your music
libraries.
Once you have your playlist ready you can choose to play through the playlist on your radio and
can also set shuffle and repeat play functions while your playlist is playing.
To save a track to ‘My Playlist’, browse the track you want to add to the playlist, press and hold
SELECT/TUNE knob, and then the track is added to the playlist.
To play 'My Playlist', press MENU button, and then turn SELECT/TUNE knob to select 'My
playlist', press SELECT/TUNE knob to confirm. Browse the track you want to play, press
SELECT/TUNE knob to select.
Repeat Play Mode
Press MENU button, and then turn SELECT/TUNE knob to select 'Repeat play: Off', then press
SELECT/TUNE knob repeatedly to shift repeat play 'On' or 'Off'.
Shuffle Play Mode
Press MENU button, and then turn SELECT/TUNE knob to select 'Shuffle play: Off', then press
SELECT/TUNE knob repeatedly to shift repeat play 'On' or 'Off'.
19
Clearing My Playlist
This feature enables you to clear the contents of your playlist.
1.
Press MENU button, turn SELECT/TUNE knob to select 'Clear My playlist', and then press
SELECT/TUNE knob to confirm.
2.
Select 'YES' to clear my playlist.
Prune Servers
The Prune Servers feature enables you to remove music servers that are no longer available to
you to browse for music.
1.
Press MENU button, turn SELECT/TUNE knob to select 'Prune servers', and then press
SELECT/TUNE knob to confirm.
2.
Select ‘Yes’ to ‘Prune shared media wake on LAN servers’.
Now Playing Information
While a track is playing, the display shows the track and a progress bar with figures for elapsed
and total track time.
To view further information, press INFO button repeatedly to display more information about the
track.
20
DAB Mode
Selecting DAB Mode
1.
Press MODE button repeatedly to select DAB mode.
2.
For initial use, radio will carry out a full scan and store stations list in memory
3.
Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric
order. The first station in the list will be selected, press SELECT/TUNE knob to broadcast.
#
Note: if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your
radio to a stronger signal area.
Selecting another DAB/DAB+ Station
1.
While a program is playing, turn SELECT/TUNE knob to display station list. Alternatively,
press MENU button and select Station list, and then press SELECT/TUNE knob to confirm.
2.
Turn SELECT/TUNE knob to select the station you want to play, and then press
SELECT/TUNE knob to confirm.
Scanning Stations
Press MENU button, turn SELECT/TUNE knob to select Scan, and then press SELECT/TUNE
knob to full scan.
21
Manual Tune
1.
Press MENU button, turn SELECT/TUNE knob to select Manual tune, and then press
SELECT/TUNE knob to confirm, the display will show the channel number and frequency.
2.
Turn SELECT/TUNE knob to step among the channels and then press SELECT/TUNE knob
select the current channel.
→
#
Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a
tuning meter with the signal strength and the multiplex name after a few seconds.
3.
To exit manual tune, directly press SELECT/TUNE knob again.
Prune Invalid
You may remove all unavailable stations from the station list.
1. Press MENU button, turn SELECT/TUNE knob to select Prune invalid, and then press
SELECT/TUNE knob to confirm.
2. Turn SELECT/TUNE knob to select ‘YES’, and then press SELECT/TUNE knob to confirm.
DRC (Dynamic Range Control) value
You can set the compression level of stations to eliminate the differences in dynamic range or
sound level between radio stations.
#
Note: Set DRC to off indicates no compression; set DRC to low indicates little compression; set DRC
to high shows maximum compression.
1. Press MENU button, turn SELECT/TUNE knob to select DRC, and then press
SELECT/TUNE knob to confirm.
2. Turn SELECT/TUNE knob to select 'DRC high', 'DRC low' or 'DRC off', and then press
SELECT/TUNE knob to confirm.
22
Changing Station Order
You may want to display the stations in different order.
1.
Press MENU button, turn SELECT/TUNE knob to select Station order, and then press
SELECT/TUNE knob to confirm.
2.
Turn SELECT/TUNE knob to select 'Alphanumeric', 'Ensemble' or 'Valid', and then press
SELECT/TUNE knob to confirm your selecting option.
Alphanumeric
Ensemble
Valid
Display all stations in alphanumeric order.
List currently broadcasting active stations before inactive ones.
Remove inactive stations from the station list.
Viewing Station Information
DAB/DAB+ stations broadcast additional information. Press INFO button repeatedly to view
information through DLS (Dynamic Label Segment), Ensemble, Program Frequency, Signal
Quality, Signal Strength, Bitrate, Codec, Channel and Date.
Showing Signal Strength
While you selected signal strength, a signal bar with the strength of the current station will show
on the display.
The indicator on the signal bar shows the minimum acceptable signal level.
#
Note: Stations with signal strength below the minimum signal level may not provide a steady stream of
audio.
23
Storing Preset Stations
Your radio can store up to 10 of your favourite DAB/DAB+ stations.
1. While playing your favourite station, press and hold PRESET button on the main unit until
diaplay shows as below:
2. Turn SELECT/TUNE knob to cycle through the preset stations store numbers 1-10.
3. Select one preset station number and then press the SELECT/TUNE knob, display will show
‘Preset stored’.
4. Alternatively, press and hold one of Preset buttons 1-10 on the remote control until display
shows ‘Preset stored’.
5. Preset number ‘
#’ will show on the display.
Recalling a Preset Station
1.
Press PRESET button to show the saved preset stations.
2.
Turn SELECT/TUNE knob to select the preset station you want to play and then press the
SELECT/TUNE knob to confirm.
3.
Alternatively, press one of Preset buttons 1-10 on the remote control to play the preset
station.
24
FM Mode
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise,
the last listened FM station will be selected.
3. To manually change the FM frequency, while FM frequency shows up, turn SELECT/TUNE
knob clockwise or anticlockwise to change the frequency by 0.05MHz per step.
4. To automatically scan, while FM frequency shows up, turn SELECT/TUNE knob clockwise
or anticlockwise and then press SELECT/TUNE knob, your radio will skip forward or
backward until it reached the next available station.
Scan settings
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations.
1.
To change the scan settings to stop only at stations with good signal strength, press MENU
button, turn SELECT/TUNE knob to select Scan setting, and then press SELECT/TUNE
knob to confirm.
2.
Display will show 'Strong stations only?', turn SELECT/TUNE knob to select 'YES', and
then press SELECT/TUNE knob to confirm.
Audio Settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss).
1. To play weak stations in mono, press MENU button, turn SELECT/TUNE knob to select
Audio setting, and then press SELECT/TUNE knob to confirm.
2. Display will show 'Listen in Mono only?', turn SELECT/TUNE knob to select ‘YES’, and then
press SELECT/TUNE knob to confirm.
Viewing Station Information
FM stations broadcast additional information. Press INFO button repeatedly. The display will show
the information through Radio Text, Program Type, Program Name and Date.
25
Storing Preset Stations
Your radio can store up to 10 of your favourite FM stations.
1. While playing your favourite station, press and hold PRESET button on the main unit until
diaplay shows as below:
2. Turn SELECT/TUNE knob to cycle through the preset stations store numbers 1-10.
3. Select one preset station number and then press the SELECT/TUNE knob, display will show
‘Preset stored’.
4. Alternatively, press and hold one of Preset buttons 1-10 on the remote control until display
shows ‘Preset stored’.
5. Preset number ‘
#’ will show on the display.
Recalling a Preset Station
1.
Press PRESET button to show the saved preset stations.
2.
Turn SELECT/TUNE knob to select the preset station you want to play and then press the
SELECT/TUNE knob to confirm.
3.
Alternatively, press one of Preset buttons 1-10 on the remote control to play the preset
station.
26
Bluetooth Mode
Pair the unit with a Bluetooth device to listen to music:
1.
Press the MODE button to select Bluetooth mode.
2.
3.
The display will flash in
repeatedly.
Activate your Bluetooth device and select the search mode.
4.
‘DigitRadio 510’ will appear on your Bluetooth device.
5.
Select ‘DigitRadio 510’ and enter “0000” for the password if necessary.
6.
7.
The
icon will remains steadily on the display when connection is successful.
While a track is playing, you can:
a.
Press
button once to resume to the beginning of track, then press
again to skip to previous track; press and hold
button once
button to fast reverse current playing
track.
b.
Press
button to pause or play current playing track.
c.
Press
button to skip to next track; press and hold
button to fast forward current
playing track.
8.
To disconnect the Bluetooth connection, press MENU button, turn SELECT/TUNE knob to
select ‘BT disconnect’, and then press SELECT/TUNE knob to confirm. The display will
show ‘Device disconnect?’, turn SELECT/TUNE knob to select ‘YES’, and then press
SELECT/TUNE knob to confirm.
#
Note: the unit will automatically switch to standby mode after 30 minutes if the source device
is disconnect, switch off or the volume is too close to mute.
NFC (Near Field Communication)
NFC enable you pair and connect with Bluetooth devices in a easy way.
1.
Press MODE button repeatedly to select Bluetooth mode.
2.
Make sure that your NFC is turned “On” on your mobile device.
3.
Hold your mobile device about 2cm close to NFC sensor on front panel for receiving an
auto-connection between your mobile device and radio.
4.
Your device then will turn-on Bluetooth automatically and will pair your device with radio. No
additional settings are necessary.
27
Aux in Mode
AUX IN allows for quick and easy connection to an MP3 player or other external audio sources.
1.
Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to connect to
your external audio device through the AUX IN socket on the back of unit.
2.
Connect power adapter to mains socket, press VOLUME/
knob to switch unit on.
3.
Press MODE button repeatedly to select Auxiliary Input mode.
4.
In Aux in mode, you may operate your audio device directly for playback features.
5.
To gain optimal volume levels, adjusting the output volume level on the audio device as well
is recommended.
#
Note: the unit will automatically switch to standby mode after 30 minutes if the source device
is disconnect, switch off or the volume is too close to mute.
28
Wireless Device Remote Control App
This feature enables you to navigate the radio via iOS device such as iPhone, iPad, iPod Touch.
All iOS devices running iOS 3.1.3 or later allow users to control your radio as long as you install it
properly.
App installation
First and foremost, we need to make sure App Store has already installed on your iOS device
properly.
1.
Create an account on the Apple Store website:
http://www.ehow.com/how_4822341_download-apps-iphone.html#ixzz1Y508MZs8
2.
You will need a credit card or payment information when sign up, even if you only plan on
downloading free apps, it will still require this information. After you are done with this
process, you should have a user name (email address) and a password. You will need these
to download the apps.
3.
From your iOS device, click on the App Store icon
and scroll through to find the
app that you want to install.
4.
Select the app, you want and tap the "free" icon (if it's a free app), it will then change the
"free" to "install". Tap again to install. Here is where you will enter your user name and
password. You should only have to enter your username once and your iOS device will
remember it, but you will need to always enter a password to prevent just anyone from
downloading apps to your iOS device.
5.
Once your iOS device has started downloading the app, a status bar will show up to indicate
how long it will take to download. Once it is complete, you can access your new app.
‘MyDigitRadio’ App installation
MyDigitRadio is an application that allows your iOS device to control your DigitRadio 510 radio.
1.
To install the MyDigitRadio App on your iOS
device, type App Store icon on the iOS device
to open the App store.
2.
In the App store, search for ‘MyDigitRadio'.
3.
Tap 'MyDigitRadio' icon
, and then tap
'Free' and then 'install'.
The wireless device remote control application –
MyDigitRadio is downloaded and installed on your
iOS device.
29
Setting up the connection
After downloading the wireless device remote control application, you must set up a connection
between the iOS device and your radio.
1.
For initial use, tap the 'MyDigitRadio' icon, your device invites you input Pin code, the default
code is 1234. You can give a user-defined code via your radio: press MENU button > Main
Menu > System setting > Network > NetRemote PIN setup.
2.
To also allows App works while your radio in standby mode, press MENU button > Main
Menu > System setting > Network > Keep network connected, turn SELECT/TUNE knob
to select ‘YES’, and then press SELECT/TUNE knob to confirm.
#
Note: If unattended to use radio for long periods of time, e.g. overnight, while on holiday
or while out of the house, select NO to save power is recommended.
3.
Set the iOS device to use the same WiFi network access point as your radio:
a.
Select Setting > Wi-Fi.
b.
Choose the network of your radio accessed.
Starting the Navigation
Tap MyDigitRadio icon on the main menu of your iOS device, then start to navigate your
DigitRadio 510 radio.
In menu screen can find controls below:
"
Browse: allows you to browse mode menu of
Internet radio, Music player or AUX in modes.
"
Mode: enables you to switch between listening
modes (Internet radio, Music player or AUX in).
"
Preset: in Internet Radio mode, allows you to
select any stations that have been stored as
presets on the radio unit.
"
Audio EQ: allows you to select an audio
equalization setting.
"
Settings: allows you to change Smart Radio
application setting parameters.
Type ‘Now Playing’ on top right to show presenting
information and controls for the current track or
station.
30
General Operation
Setting Sleep
This feature enables your radio to switch to standby mode by itself after a set sleep time.
1.
Press MENU button > Main menu > Sleep, and then press SELECT/TUNE knob to confirm.
2.
Turn SELECT/TUNE knob to view options Sleep OFF, 15, 30, 45 or 60 MINS, press
3.
SELECT/TUNE knob to confirm. The sleep icon
and sleep time will show on the display.
To turn the sleep function off while the sleep timer is still counting down, select 'Sleep' option,
turn SELECT/TUNE knob to select 'Sleep OFF'.
4.
Alternatively, press SLEEP button on the main unit or on the remote control repeatedly to set
sleep time.
Setting Alarm
Your radio includes dual alarms. Set Alarm, making sure set time at first.
1.
Press MENU button > Main menu > Alarms, and then press SELECT/TUNE knob to
confirm.
2.
Turn SELECT/TUNE knob to select ‘Alarm 1’ or ‘Alarm 2’, and then press SELECT/TUNE
knob to confirm. Alternatively, press ALARM button on the main unit repeatedly to set alarm.
3.
Turn SELECT/TUNE knob to select options, and then press SELECT/TUNE knob to confirm
the setting.
Enable:
Alarm active day: Off, Daily, Once, Weekends or Weekdays
Time:
Alarm time: 00:00 (manually set up the time )
Mode:
Alarm mode: Buzzer, Internet radio, DAB or FM
Preset:
Last listened or saved preset station (not available for Buzzer
mode).
Volume:
Alarm volume
Save:
Save the alarm
4.
When the display shows 'Alarm Saved', the alarm setting is successful.
on the display.
or
will show
5.
To temporarily switch off alarm, press SELECT/TUNE knob on the unit or press SNOOZE
button on the remote control repeatedly to set snooze time for 5, 10, 15 or 30 minutes in turn.
The set snooze time will show on the display.
6.
To turn off alarm, press VOLUME/
knob when the alarm sounds
7.
To cancel Alarm, refer to steps1-3 to enable alarm ‘Off’.
Equaliser
This feature enables you to choose a sound equalization profile. Each of the equalization setting
will change the tone of the sound from your radio when selected.
1.
Press MENU button > Main menu > System settings > Equaliser, and then press
SELECT/TUNE knob to confirm.
31
2.
Turn SELECT/TUNE knob and then press it to select Normal, Flat, Jazz, Rock, Movie,
Classic, Pop, News, My EQ or My EQ profile setup.
3.
To set up My EQ, select 'My EQ profile setup ', and then press SELECT/TUNE knob to
confirm. Turn SELECT/TUNE knob to select Bass or Treble, and then press SELECT/TUNE
knob to confirm. Turn SELECT/TUNE knob to change the value of Bass or Treble, and then
press SELECT/TUNE knob to confirm. Press BACK button, display will show ‘Save changes’.
Turn and press SELECT/TUNE knob to select ‘YES’ to save changes.
Network Setup
Users encountering networking issue may find these options useful for diagnosing and fixing
network problems.
1. Press MENU button > Main menu > System settings > Network, press SELECT/TUNE
knob to confirm.
2. Turn SELECT/TUNE knob to select your preferred network setting option:
Network wizard:
Scan for available networks
Set up a WPS encrypted network (only supporting the
PBC Wlan Setup:
router uses WPS 2.0)
View network settings such as MAC address, Wlan
View settings.:
region, IP address etc.
Manual settings:
Set wireless connection
NetRemote PIN Setup:
Set a Net Remote Pin code
List of registered networks or delete some of unwanted
Network profile:
networks
Keep network connected:
Keep network connected in DAB, FM, Bluetooth, Aux in
and standby modes
3. Press SELECT/TUNE knob to confirm your setting.
Setting Time/Date
1.
Press MENU button > Main menu > System settings > Time/Date, press SELECT/TUNE
knob to confirm.
2.
Turn SELECT/TUNE knob to select options, and then press SELECT/TUNE knob to confirm
the setting.
Set Time/date:
Auto update:
Set format:
Set timezone:
Daylight saving:
3.
32
Manually set-up both Time and Date
‘Update from DAB, ‘Update from FM’, ‘Update from
Network’ or ‘No update’
12 or 24 hour format
Select a timezone
(Only available when auto update from Network.)
Daylight saving settings
(Only available when auto update from Network.)
Then setting time according to your personal preference.
33
Setting Language
This feature enables you to change the language of displaying menu names.
1. Press MENU button > Main menu > System settings > Language, press SELECT/TUNE
knob to confirm.
2. Turn SELECT/TUNE knob to select your language, and then press SELECT/TUNE knob to
confirm.
Factory Reset
Doing a factory reset resets all user settings to default values, so time/date and presets are lost.
1. Press MENU button > Main menu > System settings > Factory Reset, press
SELECT/TUNE knob to confirm.
2. Turn SELECT/TUNE knob to select ‘YES’, and then press SELECT/TUNE knob to confirm.
Software Update
From time to time, your radio may make software upgrades available with bug fixes and/or
additional features.
If your radio detects that newer software is available, it will ask if you want to go ahead with an
update. If you agree, the new software is then downloaded and installed.
After a software upgrade, all user settings are maintained.
C
A
U
T
I
O
N
Before starting a software upgrade, ensure that your radio is plugged into a stable mains power
connection. Disconnecting power during a software update may permanently damage the unit.
1. Press MENU button > Main menu > System settings > Software update, press
SELECT/TUNE knob to confirm.
2. Turn SELECT/TUNE knob to select 'Auto-check setting', your radio will check periodically
for new version software.
3. Turn SELECT/TUNE knob to select 'Check now', your radio will now to check new version
software and automatically upgrade the detected new version software.
Setup Wizard
When this unit is started for the first time, it runs through a setup wizard to configure settings for
date/time and network. Once this has finished, the system is ready to use in most modes.
1.
Press MENU button > Main menu > System settings > Setup wizard, press
SELECT/TUNE knob to confirm.
2.
34
Turn SELECT/TUNE knob to select 'YES', and then press SELECT/TUNE knob to confirm.
Viewing System Info
This information may be requested when dealing with technical support issues.
1. Press MENU button > Main menu > System settings > Info, press SELECT/TUNE knob to
confirm.
2. Turn SELECT/TUNE knob to view 'SW version', ‘Spotify version’, 'Radio ID' and 'Friendly
Name'.
Setting Backlight
1.
Press MENU button > Main menu > System settings > Backlight, press SELECT/TUNE
knob to confirm.
2.
Turn SELECT/TUNE knob to select ‘Power-on Level' or 'Standby Level', then press
SELECT/TUNE knob to confirm.
3.
Turn SELECT/TUNE knob to select backlight level, and then press SELECT/TUNE knob to
confirm the setting.
Power-on Level
Standby Level
"
High
"
Medium
"
Low
"
High
"
Medium
"
Low
35
Specifications
Items
Description:
Power Requirements:
Specifications
Internet, DAB/DAB+ and FM radio with Bluetooth and Spotify
Connect
AC Input: 110-240Vac, 50-60 Hz
DC Output: 18V, 2A
Audio Output Power:
10Wrms x 2
Power Consumption:
36W (Max)
Dimension (W x H x D):
350mm x 115mm x 132mm
This symbol on the product or in the instructions means
that your electrical and electronic equipment should be
disposed at the end of its life separately from your
household waste. There are separate collection systems
for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased
the product.
36