1ch Ethernet Over Coax Transceiver

1ch Ethernet Over Coax Transceiver
IV-EOC-1RJ45T
Features:
Features:
. Ethernet Over Coax Transceiver 1*BNC + 1* RJ45
. A conversion device for Ethernet over Coax, can be used in pair or one to multi
. IV-EP11AT provides one POE port. It is no need for power adaptor and power cord, then be based on POE technology
that can supply power for HD cameras, wireless AP, IP telephone equipment over the Ethernet Cable.
. Supports IEEE802.3af (15.4W) and IEEE802.3at (25.5W) standard
. Supports POE power supply (Local side can supply power over coax cable forthe remote side IP camera and equipment)
. Modulation frequency: 2 MHz-28 MHz; Modulation method: OFDM
. Encryption: AES128-bit encryption; Networking: One Master and 7 Slaves
. Protocol:IEEE802.3/u 10Base-T, 100Base-TX, IEEE802.1Q VLAN, IEEE802.3af/at
. Support Auto-sensation of MDI/ MDIX at Ethernet port, compatible with NIC, switch and HUB etc.
. Support up to 1522 Bytes data packet
. Support Store and forward working mode; backpressure on Half-Duplex and flow control Full-Duplex.
. Support Ethernet ESD protection and EFT
. POE (15.4W) and POE+ (25.5W) supported (optional
Specification
IV-EOC-1RJ45T
Specification
Parameter
Commercial Grade
Design grade
10/100Mbps
Rate
IEEE802.3/u,10Base-T,100Base-TX,IEEE802.1Q VLAN,IEEE802.3af/at
Protocol
Transmission distance
Coax(SVY75-5): 1.5Km(TCP/IP up to 70Mbps); Cat 5: 100m
one RJ45: connected to STP/UTP cat 5; one BNC: Q9
Port
Duplex: flow control, Half Duplex: Backpressure
Flow control
<10-9
Error rate
50,0000 hours
MTBF
LED indicator
PWR- power, LAN- link/ Act, Coax- coax cable connection, MASTER- master device monitoring
Power supply
Range:12~56 VDC
<3W (without POE function)
Power
Working temperature/ humidity
-4°F~158°F (-20~70℃), 5%~90% Non condensation
Storage temperature/ humidity
-40°F~158°F (-40~85℃), 5%~90% Non condensation
Dimension
Weight
3.7" x 2.8" x 1.02" (94mm × 71mm× 26mm)
0.45kg
IDView Technologies • 12000 Ford Rd. Suite 110 • Dallas, TX 75234 • www.idview.com