UserGuide - Bush -50-211F Home Mode.indd

50” FULL HD 1080p LED TV
Installation & Operating Instructions - Please keep for future reference
144/5114D
50-211F
Important - Please read these instructions fully before installing or operating
These instructions contain important information which will help you get the best from your
television and ensure safe and correct installation and operation.
For any help concerning set up and use of your TV please call the
Customer Helpline: 0871 2000 463
Lines open: 8.30am - 6pm Monday to Friday and 9am - 5pm Saturday
UserGuide - Bush -50-211F Home Mode.indd 1
11/8/2013 3:54:30 PM
2
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:2
11/8/2013 3:54:31 PM
Important Guarantee Information
Congratulations on purchasing this television. We hope you have many years of trouble free
enjoyment from your purchase.
Your product is covered under the manufacturers guarantee for 12 months from date of
purchase.
In the event of a fault being diagnosed, please refer to the frequently asked questions/
troubleshooting section at the rear of this user guide.
If you are still unable to remedy the fault, try resetting the TV to factory settings, (details in this
user guide) or contact the helpline.
In the event that a fault is diagnosed, the helpline will arrange to collect the TV from your home
or work address, return it to our service centre, repair the item and then return it to you.
If we believe we cannot offer a permanent repair, we will replace the item.
Helpline Information
Telephone UK 0871 2000 463, ROI 01443 3940
Web support: www.umc-uk.co.uk
The telephone opening hours are Monday to Friday 8.30am to 6pm, Saturday 9am – 5pm.
You must retain all packaging materials, in addition to your proof of purchase/receipt, as you will need
these in the event of warranty/service support.
This guarantee is in addition to and does not affect your statutory rights.
If you need to call the helpline, you will need the following information.
1) Model Ref
_____________________________________ (You can find this on the rear of the TV)
2) Date of purchase
______________________________________ (You can find this on your sales receipt)
3) Serial Number
_____________________________________ (You can find this on the rear of the TV)
Example Only
Model No.
Serial No.
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:3
3
11/8/2013 3:54:31 PM
Important Safety Instructions
IMPORTANT - Please read these instructions. All the safety and operating instructions
should be read before the appliance is operated.
Warnings
•
•
To reduce the risk of fire, electric shock or
damage to the television, do not expose it to dust,
rain or moisture, or place any objects filled with
liquids on or near the television.
Do not place the television in a confined space,
ensure that nothing can obstruct the ventilation
openings at the rear of the television.
•
•
•
•
•
Dispose of this television and any components
including batteries in an environmentally friendly
manner. If in doubt, please contact your local
authority for details of recycling.
•
•
•
•
•
•
•
•
For your safety, this appliance is fitted with a
fused moulded 3 pin mains plug. Should the
fuse need to be replaced, ensure that any
replacement is of the same amperage and
approved with the BSI mark.
The television should be connected to a
main socket outlet with a protective earthing
connection.
Never try and replace the mains plug unless
you have adequate qualifications and are
legally authorised to do so. In the event that a
replacement Mains cable is required, contact the
manufacturer for a suitable replacement.
Never use the television if it is damaged in
any way.
Always place the television on a flat level surface
avoiding anywhere which may be subject to
strong vibration.
Ensure the television is not placed on top of the
power cable as the weight of the television may
damage the cable and cause a safety hazard.
Never place mobile phones, speakers or any
other device which may cause magnetic or radio
interference with the television. If interference
is apparent, move the device causing the
interference away from the television.
To disconnect the apparatus from the mains,
please use the all pole mains switch located on
the side, underside or rear of the TV. The switch
shall remain readily operable.
Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fire or the like.
Install the product at least 5cm from the wall for
ventilation.
Maintenance
To prevent the spread of fire, keep
candles or other open flames away
from this product at all times
Safety
4
•
To clean this unit, wipe with a soft, dry cloth. If
the surfaces are extremely dirty, use a soft cloth
dipped in a soap and water solution or a mild
detergent solution.
Never use alcohol, paint thinner
or benzene to clean this unit.
Before using a chemically treated
cloth, read the instructions that
came with the cloth carefully.
CAUTION: If water or other liquid enters the television
through the display panel surface or back cover a
malfunction may occur.
Packaging
•
•
The safest way to transport your item is in
the original box/packaging - please save your
packaging for this.
You will need original box/packaging in the event
of warranty/service repair or support. We are
unable to carry out warranty/service if you are
unable to package it correctly.
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:4
11/8/2013 3:54:31 PM
Important Safety Instructions
IMPORTANT - Please read these instructions. All the safety and operating instructions
should be read before the appliance is operated.
Important Information - Regarding Use of
Video Games, Computers, Captions or Other
Fixed Image Displays
The extended use of fixed image program material
can cause a permanent “shadow image” on the
LCD/LED panel.
This background image is viewable on normal
programs in the form of a stationary fixed image. This
type of irreversible LCD/LED panel deterioration can
be limited by observing the following steps:
How do I dispose of this product?
UK: Waste electrical products should not be disposed
of with household waste. Separate disposal facilities
exist. For your nearest facilities, please see
www.recycle-more.co.uk or in store for details.
ROI: Waste electrical products should not be
disposed of with household waste. Separate disposal
facilities exist. Check with your Local Authority or
retailer for recycling advice.
1. Reduce the brightness/contrast setting to a
minimum viewing level.
Batteries
2. Do not display the fixed image for extended
periods of time.
•
3. Turn the power off when not in actual use.
Examples of images that you need to watch out for
are as follows (this is not an exhaustive list):
• TV Channel Logos: e.g. Shopping channel logos
and pricing displays-especially if they are bright
and stationary.
• Moving or low contrast graphics are less likely to
cause ageing of the screen.
• Time Displays
• Teletext: Do not view a stationary page for a long
period of time
• TV/DVD Menus: e.g. Listings of DVD disc content
• Pause Mode: Do not leave the TV in pause mode
for long periods of time, e.g. When watching
DVDs or videos.
•
•
•
•
Do not expose batteries to high
temperatures, excessive heat,
prolonged sunshine or fire as
this may cause leakage, explosion
or ignition.
Observe the correct polarity when
inserting batteries.
Do not use different types of
batteries together or mix old and
new batteries.
Dispose of batteries in an
environmentally friendly way.
Certain regions may regulate the
disposal of batteries.
Cd
Please consult your local authority.
Important - Once ‘shadow image/screen burn’
occurs, it will never disappear and is not
repairable under warranty.
SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers,
complete with rich bass, high frequency detail and clear dialog.
TruSurround HD, SRS and the
symbol are trademarks of SRS Labs, Inc.
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:5
5
11/8/2013 3:54:32 PM
6
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:6
11/8/2013 3:54:32 PM
Contents
Manufacturers Guarantee Information
Important Safety Instructions
3
4-5
What is included in the box
8
Attaching the stand
9
Detaching the stand and wall mounting
10
Securing the TV to a Wall
11
Getting Started - Initial Set Up
12
TV Buttons and Input Source Menu
13
Remote Control
14
Connections
15-17
TV Menu Operation
18-23
Channel Menu
Picture Menu
Sound Menu
Time Menu
Feature Menu
Setup Menu
18
19
20
21
22
23
PC Settings
24
7 Day TV Guide
25
USB Mode / Media Player
26
General Information
27-30
Using your TV with a Sky digital set top box 27
Frequently Asked Questions
28-29
Technical Specifications
30
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:7
7
11/8/2013 3:54:32 PM
What Is Included In The Box
Accessories
Included with this TV are the following accessories:
1 x User Guide
1 x Remote Control
User Guide
1 x Quick Start Guide
2 x AAA Batteries
QSG
1 x TV
1 x Stand Installation Pack
4xB
M (4x14)
2xA
M (4x16)
5 x ST(4x25)
1 x RF Cable
Please save your packaging as you will need this in the event of warranty/service repair or support. We are
unable to carry out warranty/service if you are unable to package it correctly. The safest way to package your
item in the event of warranty/service repair is in it’s original box/packaging.
8
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:8
11/8/2013 3:54:32 PM
Attaching The Stand
To complete the stand installation you will require a Phillips screw driver.
The Stand Installation pack comes with three sets
of screws.
4xB
M (4x14)
2xA
M (4x16)
5 x ST(4x25)
fig 1) Secure the stand neck to the TV using the
4 x B M (4x14) and 2 x A M (4x16) screws provided.
4 x B M (4x14)
4xB
M (4x14)
2 x A M (4x16)
2xA
M (4x16)
B
B
1
B
B A
A
fig 2) Peel off the protective plastic cover then attach
the stand base to the stand neck
1
1/2
2
fig 3) Secure the base to the neck using the
5 x ST (4x25) screws provided.
5 x ST(4x25)
5 x ST (4x25)
43
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:9
9
11/8/2013 3:54:41 PM
Detaching The Stand And Wall Mounting
Detaching the Stand
To detach the stand please remove the 6 screws
highlighted then remove the stand neck and base
from the rear of the TV set.
4xB
M (4x14)
2xA
M (4x16)
B
B
B
B A
A
Wall Mounting the TV
IMPORTANT - Before drilling any holes in the wall ensure
you are not drilling where there could be any electric wires,
water or gas pipes.
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the
mounting holes on the rear of the TV. These holes
are indicated in the picture below.
IMPORTANT – If wall mounting this TV, only use the
screws already provided in the wall mounting holes.
Using other screws which are longer could cause
irreparable damage to internal parts.
TV
fig 1
INCORRECT
For optimum viewing, if wall mounting the TV higher
than eye level, the TV should be tilted downwards so
that the TV’s screen is ‘face on’. See fig 1 and 2
Viewing angle
TV
CORRECT
fig 2
Viewing angle
10
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:10
11/8/2013 3:54:41 PM
Securing The TV To The Wall
Securing the TV to the Wall
For your safety you can secure the TV to a wall using
a fastening chord. With this method you can prevent
the TV from falling forward which could cause injury
and/or damage to the TV.
1) Using one or both of the top wall-mounting holes
and screws (the screws are already supplied in the
wall mounting holes) fasten one end of the
fastening chord/s to the TV.
2) Secure the other end of the fastening chord/s to
your wall. (you will need screws/fixings suitable for
your wall type - available separately from most
DIY stores)
IMPORTANT – Please ensure that children do not
climb on the TV set.
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:11
11
11/8/2013 3:54:42 PM
Getting Started - Intial Set Up
1) Using the RF cable supplied, connect the TV to the
TV Aerial wall socket (Fig A)
1
Fig B
Connect the power cable to the Electrical outlet
(Fig B)
Fig A
2) Switch on the television using the power on/off
switch located on the side of the TV.
3) Insert the batteries supplied into the Remote
control and press the Standby button to power on the
TV
2
Power on/off
4) You will now be welcomed with the initial set-up
screen. If it does not appear, on the remote control,
please press [MENU] then 8-8-8-8 and the menu will
appear. Press OK on the remote control and tuning
will start.*
3
5) After tuning the following screen will appear.*
If you are missing channels, the reason for this is
likely to be signal strength, you should consider
connecting signal booster and re-tuning the TV.
* Screen shots/images are shown for illustration
purposes only and may change dependent on
model/region
4
Important
As part of our ongoing development to reduce power
consumption, we have added an extra function to
this Television called ‘Home Mode’ (you will see
this during the first time installation set up). Power
consumption using the Home Mode function is
approximately 25% lower than some other modes.
The picture brightness is reduced using the Home
Mode function. If this function is not suitable for your
viewing environment, you can select other modes as
necessary. (Please note, ‘Store mode’ is for optimum
default picture settings, however, power consumption
is approximately 25% higher than ‘Home Mode’)
5
Please refer to the user guide section ‘Picture
settings’ in order to change the mode to one that
maybe more suitable for your environment. There
is also a shortcut button on the remote control
called ‘P-Mode’ should you wish to change to
another mode.
12
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:12
11/8/2013 3:54:42 PM
TV Buttons & Source Menu
1
2
3
4
5
6
7
1. Volume up and menu right
5. Displays Menu/OSD
2. Volume down and menu left
6. Displays the input source menu
3. Programme/Channel up and menu up
7. Standby Power On/Off
4. Programme/Channel down and menu down
Choosing Mode Input/Source
To switch between the different input/connections.
A) Using the buttons on the remote control:
1) Press [SOURCE] - The source menu will appear
2) Press [\/] or [/\] to select the input you require.
3) Press [OK]
B) Using the buttons on the Television:
1) Press [SOURCE]
2) Scroll up / down using CH+/ CH- buttons to the
input/source you require
3) Press Vol+ to change input/source to the one
selected.
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:13
13
11/8/2013 3:54:43 PM
Remote Control
Viewing remote control - TV
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
STANDBY
MUTE
DTV
RADIO
DVD
USB
NUMBER BUTTONS
TV GUIDE
- To return to the previous channel viewed
P.MODE - Scrolls through picture mode options
VOL
CH
S.MODE - Scrolls through sound mode options
FAV - To display favourites menu
MENU
EXIT
- Allows you to navigate the
on-screen menus and adjust the system settings
to your preference
18. SOURCE/AV
19. INFO - Press once for now/next channel
information. Press twice for programme
information about current programme
20. ASPECT
21. SLEEP
22. SUBTITLE
23. AUDIO
24. TEXT
25. TEXT HOLD
26. DISPLAY
27. TEXTZOOM/DVD ZOOM
28. DVD Menu/Record
- To restart the current chapter
- To advance forward to the next chapter
- To stop/eject Disc
(hold for 4 seconds to eject disc)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
29.
30.
31.
32.
33.
REC LIST
GOTO
A-B
REPEAT
ANGLE/
3D - Change to 3D mode
1
2
3
5
4
6
7
8
10
11
9
12
13
14
15
16
17
18
20
21
24
25
28
19
22
23
26
27
29
For Models with Integrated DVD players
30
For Models with PVR Function
31
32
33
For Models with USB Playback
For Models with 3D Feature
14
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:14
11/8/2013 3:54:48 PM
Connections
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
COAX
2
USB
9
COAX Audio Out
USB
HDMI 3
CI CARD IN
Video
R/L Audio in
COMPONENT (HD)
EARPHONE
HDMI 1
HDMI 2
SCART
VGA PC Audio In
VGA PC
RF IN
3
4
5
HDMI 3
CI CARD IN
VIDEO
10
11
Digital Coax output
USB Input
HDMI input
Common Interface module
Video Input
Component Audio input
Component input (YPbPr)
Earphone Socket
HDMI input
HDMI input
SCART input
3.5mm PC audio input
VGA-PC input
RF / TV Aerial Input
6
R
L
Y
12
13
VGA/PC(Audio in)
VGA/PC IN
Pb
7
8
Pr
EARPHONE
14
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:15
15
11/8/2013 3:54:49 PM
Connections
Connecting a DVD Player/Recorder, Video Recorder or Cable/Satellite Box
TVs Source should be set to SCART
SCART
OUT
SCART
IN
RF OUT
RF IN
RF IN
Connecting a Camcorder, Camera or Games Console
Source should be set to Video
Audio
R/L
Video
Connecting a High Definition (HD) Device
Option 1 - via HDMI to HDMI cable
A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio
with minimal loss of quality.
TVs Source should be set to the corresponding HDMI Port (HDMI 1, HDMI 2, etc)
Note: This model TV can not be used as a PC/laptop monitor via HDMI input. The HDMI Input is provided to view
digital content with compatible external devices..
16
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:16
11/8/2013 3:54:49 PM
Connections
Connecting a High Definition (HD) Device
Option 2 - via Component cable
If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE
connectors you must connect via Component (for picture) and by phono cable (for sound).
TV Source should be set to Component.
Y
Y
PB
PB
PR
PR
L
L
R
R
Connecting to a device with VGA/PC output (Laptop or Desktop Computer)
Source should be set to VGA/PC
VGA/PC
IN
VGA/PC
OUT
VGA/PC
(AUDIO
IN)
AUDIO
OUT
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:17
17
11/8/2013 3:54:50 PM
Channel Menu
Auto Tuning
Allows you to retune the television for all digital
channels, digital radio stations and analogue
channels.
Freeview Manual Tuning
Allows you to manually tune your digital signal
To access this menu, press [MENU] button on the
remote control and scroll right.
To enter a menu press [OK]
If you wish to make changes to any of the default
settings, use the scroll
buttons. To confirm
any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
Analogue Manual Tuning
Allows you to manually tune your analogue signal
Programme Edit
Allows you to delete, skip and add favourite channels.
Signal Information
Allows you to view signal frequency, signal quality
and signal strength
Tip: If you do not press any buttons for 30 seconds,
the menu will automatically exit. You can change the
length of time before the menu exits automatically see ‘Menu Duration’ section.
18
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:18
11/8/2013 3:54:51 PM
Picture Menu
A
AV
Picture Mode
• Dynamic - Recommended settings for fast
moving pictures
• Standard - Default settings
• Mild - Set to be lighter in colour and less
bright
• Personal - Lets you manually alter all the
settings
• Home Mode - This is a power saving mode
which reduces the energy usage by up to 25%
(by reducing the power to the LED/LCD panel).
In Home Mode, the TV will switch itself into
Standby after 4-5 hours in the event that the TV
buttons or remote control buttons are not pressed
Noise Reduction
• Off - Turns noise reduction off
• Low - Minor system adjustment
• Middle - Medium system adjustments
• High - Maximum system adjustments
• Default - Default settings
You can make the following adjustments in
Personal Mode
Contrast
Switch the balance between black and white
Brightness
Increase or decrease the brightness of the picture
Colour
Increases the colour from black and white
Tint
Lets you increase or decrease the level of tint within
the picture
Sharpness
Increase or decrease the sharpness of the picture
Colour Temperature
• Cold - Increases blue within the picture
• Normal - Default settings
• Warm - Increases red within the picture
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:19
19
11/8/2013 3:54:51 PM
Sound Menu
Sound Mode
• Standard - Default settings
• Music - Emphasises music over voices
• Movie - Provides live and full sound for movies
• Personal - Selects your personal sound settings
• Sports - Emphasises sound for sports
Treble
To adjust the amount of high frequency within the
sound
Bass
To adjust the amount of low frequency within the
sound
Balance
To switch the sound between the left and right
speakers
Auto Volume Level (AVL)
When ‘on’ is selected, the volume will stay at a
constant level regardless of input/source
Digital Output
• Off - Off
• PCM - Select this option if you are connecting
to a Stereo Hi-fi via coax cable (Pulse-code
modulation (PCM) is a digital representation of an
analogue signal)
• Auto - Selects the best settings automatically
AD Volume
This allows the user to increase and decrease the AD
(Audio Description) volume level.
(Audio Description is a service available on certain
programmes. It provides a description of what is
happening during the selected programme for a
person who is visually impaired)
Tip: Treble and bass levels can only be adjusted
when the sound mode ‘Personal’ is selected.
Surround Sound
• Off - Off
• TruSurround HD - TruSurround HD™ creates
an immersive, feature-rich surround sound
experience from two speakers, complete with
rich bass, high frequency detail and clear dialog.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
20
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:20
11/8/2013 3:54:52 PM
Time Menu
A
AV
To access this menu, press [MENU] button on the
remote control and scroll right.
To enter a menu press [OK]
Clock
Shows the date and time
Off Time
Allows you to set a specific time for your TV to turn off
If you wish to make changes to any of the default
settings, use the scroll
buttons. To confirm
any settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
On Time
Allows you to set a specific time for your TV to turn
on, the channel it will then display, the source it will
be on and also the volume. This function can then be
toggled to repeat every day or a certain day.
(The TV must be in Standby Mode for this to
be effective)
Time Zone
Change your current time zone
Sleep Timer
Lets you set the sleep timer so the television
automatically switches off after a set amount of time.
Off -> 10min -> 20min -> 30min -> 60min -> 90min ->
120min -> 180min -> 240min
Auto standby
Set Auto standby between 3 hours, 4 hours and 5
hours ( to turn off this function you must exit ‘home
mode’ in the Picture Menu)
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:21
21
11/8/2013 3:54:52 PM
Feature Menu
AV
AV
Schedule List
Lists your programme reminders
You can make the following adjustments once
you have accessed System Lock:
CI Information
Pay per view services require a “smartcard” to be
inserted into the TV. If you subscribe to a pay per
view service the provider will issue you with a ‘CAM’
and a “smartcard”. The CAM can then be inserted
into the COMMON INTERFACE PORT (CI Card In).
Key Lock
Allows you to lock the buttons on the side of the TV
set
System Lock
Allows you to lock or unlock the menu. You will be
asked to enter a 4 digit password use the button to
quit the password input. Use the
button to clear.
Default password is 0000
Audio language
Allows the user to change the audio language
Subtitle Language
Allows the user to change the subtitle language
Parental Guidance
Allows you to set the rating to block certain content
based on age information
Default Source
Allows the user to set the default source. The default
source is the source the TV starts on when first
switched on
Default Channel
Allows the user to set a channel as the default
channel on the Digital source. The default channel is
the channel the TV starts on when first switched on
Source Lock
Allows you to lock the source menu
Channel Lock
Allows you to lock certain channels manually
Max Volume
Allows you to adjust and set the maximum volume
Change Password
Allows you to change the password
22
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:22
11/8/2013 3:54:52 PM
Setup Menu
Within the UK the picture format varies depending
on the channel/broadcast. There are a number of
different options to best meet your needs
Menu Language
Allows you to change the language of the menu
•
Auto - Automatically displays the best picture
format. So the picture is in the correct position.
May have black lines at the top/bottom and/or
sides.
•
Original - Will display the picture from the
broadcaster without any change
•
4:3 - Displays the 4:3 picture in its original size.
Side bars are shown to fill the 16:9 screen
•
16:9 - Fills the screen with a regular 16:9 signal
and 4:3 will stretch to fill the screen
•
14:9 - Displays the 14:9 picture in the correct
proportion. As a result side bars are shown on
the screen
•
Zoom - The picture is the correct proportion but
zoomed in to fill the screen
Aspect Ratio
Blue Screen
Changes the background when there is no input
between clear and a blue background (Only available
on some sources)
Menu Duration
Lets you adjust the amount of time the On Screen
Menu stays on the screen before disappearing
Reset to Default:
• Reset Menu System - This resets the menus to
factory settings.
• Reset TV Channels - This clears all the TV
channels from the television.
Software Update (USB)
This menu lets you install the new software/firmware
onto the television. Further details of how to do this
will be issued with the firmware. Contact the helpline
or refer to the ‘product support’ section of the website.
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:23
23
11/8/2013 3:54:53 PM
PC Settings
A
AV
To access this menu, press [MENU] button on the
remote control and scroll right.
To enter a menu press [OK]
Auto Adjust
Lets you automatically configure the television to be
used as a computer monitor
If you wish to make changes to any of the default
settings, use the scroll
buttons. To confirm
any settings press [OK] button.
H Offset
Changes the horizontal position of the picture
To exit this menu at anytime, press [EXIT] button.
V Offset
Changes the vertical position of the picture
Size
Increase picture size
Phase
To adjust delay time of phase in order to reduce the
noise of picture
Tip: If the computer is left in-active for a period of
time, the television will switch into a ‘sleep’ state (the
screen will power off to save power). To switch back
on press the standby button.
Position Reset
Changes back to the factory settings
24
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:24
11/8/2013 3:54:53 PM
7 Day TV Guide
TV Guide is available in Digital TV mode. It provides
information about forthcoming programmes (where
supported by the freeview channel). You can view
the start and end time of all programmes and on all
channels for the next 7 days and set reminders.
1) Press [TV GUIDE]. The following 7 Day TV Guide
will appear.
2) Navigate through the menu using
You can now:
Set a reminder by pressing GREEN
View a previous day by pressing YELLOW
View the next day by pressing BLUE
3) Press [EXIT] to exit the 7 day TV Guide.
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:25
25
11/8/2013 3:54:54 PM
USB Mode / Media Player
USB mode offers playback of various different types
of content that you have saved on your USB Memory
Stick.
1)
On switching to USB source the above menu screen
will appear. The content will be divided into Photo,
Music, Movie and Text based on file type.
1) You can navigate through the menus using the
scroll
buttons. To confirm the item you wish
to play/view press [OK] button.
2) Select the drive you require.
(If your drive only has 1 partition you will only see
1 item).
2)
3) You can now access the item. Press OK to view.
4) While viewing you control the item using (Fig A)
or by pressing ( i ) and using
and (OK)
Tip: If you experience a playback issue, please
ensure the files being used are the correct format
(example - the picture plays but no sound) See
technical specification page for compatible file types
3)
4)
Fig A
26
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:26
11/8/2013 3:54:54 PM
Using Your TV With a Sky Digital Set Top Box
Option 1) Connecting your TV to your Sky box
(when both the TV and Sky Box are located in the same room)
Depending on your Sky Box & TV model, connect either by SCART or HDMI cables
(available separately)
If connecting by SCART, select the ‘Input source’ on the TV as SCART.
If connecting by HDMI, select the ‘Input source’ on the TV as HDMI (if the TV has
more than 1 HDMI port, ensure you select the input source to match the HDMI
numbered port on the rear of the TV)
If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky
remote control (Revision 9 or later) and you will need to programme a 4 digit code
into it. See bottom of this page.
Option 2) Connecting your TV to your Sky box (when your Sky box is located in a different room to the TV)
Please note, if you are adding a ‘Magic Eye/TV Link’
to your system so that you can use your Sky remote
control to change the Sky channel in the room where
the 2nd TV is located, please refer to the instructions
included with the TV link/magic eye in order to ensure
the RF or RF2 output on your Sky box is powered on.
(The red LED light on the TV link/magic eye will light
up if the RF / RF2 output is correctly set up) If you do
not have the instructions that came with the TV link/
magic eye, instructions on how to do it can be found
on our web site.
2nd TV in
another room
Connect to the
Aerial/RF input
on the 2nd TV
SCART
or HDMI
cable
RF/COAX cable from
Sky Box to 2nd TV
Sky Box
Connect to RF
or RF2 output
on the Sky box
TV Link/Magic Eye
(optional)
1) To tune the TV to the Sky box, on the 2nd TV, select the ‘Analogue’ input source.
2) Select the channel that you wish to store the Sky box/channel on. (If you do not use channels 1-5 because you
no longer have analogue terrestrial channels after digital switchover, you may choose to select channel 1 to store
the Sky box/channel, if you still have and use analogue channels 1-5, you may for example decide that channel 6 is
the best option for you)
3) Press the corresponding number on the remote control to select the desired analogue channel chosen as per
point 2 above.
4) On the TV remote control, press Menu. Now navigate through the menus to select Manual Tuning or Analogue
Manual tuning (refer to the Tuning/Channel menu section of this user guide if necessary)
5) Manually tune in the channel (usually, the Sky box is at a frequency between 800Mhz and 850Mhz) once the
Sky box/channel is found, press ‘OK’ to store it.
If you wish to use your Sky remote to operate the TV’s functions, you will need a Sky remote control
(Revision 9 or later) and you will need to programme a 4 digit code into it. Please see below.
Using a Sky Remote or a Universal Remote to operate your TV
Sky Remote Control - If you wish to use your Sky remote to operate the basic functions of your TV, you need to
programme a 4 digit code into it. Please note - you will need the latest Sky Revision 9 remote control as this is the
only version that includes the latest software/firmware necessary to operate this model of TV.
The code required for this television is 2134. If you wish to upgrade/replace your existing Sky remote control to the
latest version, you can do so on our web site.
Universal Remote Control - If you wish to use a Universal remote control to operate your TV, please refer to the
website for a full list of codes. (Please note we only have codes for One for All branded remote controls, if you
have an alternative brand of Universal remote, please refer to the manufacturer for the code.)
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:27
27
11/8/2013 3:54:55 PM
Frequently Asked Questions
General
I would like to have
louder sound by
connecting additional
speakers
Subject to the TV model and connections, it is possible to connect the TV
to an external amplifier or surround sound (subject to connections/inputs
on the device) as follows:1) Connect a COAX cable* from the TV’s COAX output to your amplifier/
surround systems COAX input
2) Connect a 3.5mm jack to L/R phono cable* from the TV’s headphone
socket (where fitted) to your amplifier/surround sound L/R input. Please
note sound to the TV’s speakers will be disabled.
*cables and switches mentioned are available to purchase separately from
your retailer.
General
Why are some
options in the menu
unavailable and
greyed out
Some options are only available in certain sources, i.e. HDMI, PC/VGA.
They are unavailable in the other sources where they have no affect.
General
Can I stop my TV
turning off after
4hrs?
Yes
1) In the picture settings menu, de-select Home Mode
2) In the time settings menu, scroll down to Auto standby and select OFF
TV
I have tuned in
Digital TV but I am
not receiving any or
all of the channels
and/or the channels I
receive are breaking
up
1) Check you are in an area that can receive Freeview. Visit
www.freeview.co.uk
2) Check you are using an aerial that is able to receive a good digital
signal. In most cases, you will need an outdoor digital hi-gain/wideband
aerial. In areas that have excellent Freeview coverage, you may be able to
use a loft type aerial but it is highly likely that you will also need to connect
a booster between the back of the TV and the TV aerial wall socket.
Unfortunately, to receive a good enough digital signal, it is not possible
to use a portable/indoor type aerial. This may change once the analogue
signal is switched off in 2012 and the Digital signal strength is increased.
TV
I have re-tuned my
television but when
I switch it off it is not
storing the channels
Complete a first time installation, please refer to the set-up menu section
of the manual of how to do this
VCR/DVD
Recorder
I have connected
the TV to my VCR or
DVD Recorder via
SCART but it is not
recording
In addition to connecting via SCART, you should connect the aerial cable
from the wall socket to your VCR/DVD Recorder and another aerial cable
from the VCR/DVD Recorder to the TV
Game
Consoles
I have connected
my PS3 to the TV
via HDMI, but I am
not receiving any
pictures or sound on
my TV
1) Ensure the TVs source is on HDMI
2) Check your settings on your PS3 are as per the PS3 instruction manual
28
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:28
11/8/2013 3:54:56 PM
Frequently Asked Questions
Game
Consoles
I have connected
my Xbox 360 to the
TV via Component
Cables (Red, Green
& Blue) but I am not
receiving any sound
Component cables only provide HD Pictures. For the sound you will need
to connect the Red & White audio cables on the Xbox to the Red & White
phono inputs on the rear of the TV. Please refer to the ‘Connections’
pages.
USB
Mode
I have inserted a
USB Memory Key,
but the TV does not
recognise it
Ensure the USB Memory Key is formatted to type FAT32.
USB
Mode
Using a USB
portable hard drive
If you wish to use a portable hard drive larger than 32GB, please note
that it must be formatted to the FAT32 file system in order to operate on
this TV. Windows XP/Vista computers are only capable of formatting up
to 32GB, therefore, you will need a software programme/utility to format
larger hard drives. Please refer to the web site for more information.
System
Lock
I have changed the
password on the
television and now
forgotten it
There is a master password of 4711, to gain access to the TV menu and
reset the normal password
Note:
Supplier may change TV software and on screen
graphics without warning
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:29
29
11/8/2013 3:54:56 PM
Technical Specification
Model
50/211F
Screen size (diagonal)
Resolution
50”/127cm
1920 x 1080
RF
75 ohm Antenna / PAL-SECAM
Video Inputs
3 x HDMI, 1 x VGA/PC, 1 x SCART, 1 x USB, 1 x Composite/Video, 1 x Component/YPbPr
Sound Inputs
1 x shared audio for Composite/Video & Component/YPbPr,
1 x 3.5mm jack for PC audio input
Sound Outputs
1 x Coax Audio output , 1 x 3.5mm headphone jack
USB Port
1
Sound power,
watts (RMS)
2 x 9W
Dimensions including stand (mm)
Net weight
1137W x 735H x 255D
20.4 kgs
Energy Consumption Info
Voltage and power consumption
Annual Energy Consumption
Wallmounting VESA
30
110-240v 50 / 60Hz
65 / 80 / 110W (Ecohome / Standard / Max)
EEI - A+ (Energy Rating)
(in standby less than 0.5w)
95 kWh
400 x 400
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:30
11/8/2013 3:54:56 PM
For any help concerning set up and use of your TV please call the Customer Helpline: 0871 2000 463
UserGuide - Bush -50-211F Home Mode.indd Sec1:31
31
11/8/2013 3:54:56 PM
BUS/MAN/0005
UserGuide - Bush -50-211F Home Mode.indd Sec1:32
11/8/2013 3:54:56 PM
Download PDF

advertising