RuggedNet
TM
RuggedNet GPoE+/Mi
Managed Industrial 10/100/1000 Power Source Equipment (PSE) PoE/PoE+ Ethernet Fiber Switch
The RuggedNet GPoE+/Mi is an industrial ruggedized and
temperature-hardened Ethernet switch that features one
or two 1000BASE-X Gigabit fiber ports and four or eight
10/100/1000BASE-T RJ-45 Power Sourcing Power-overEthernet (PoE and PoE+) ports. The RuggedNet switch
enables network distance extension with fiber cabling and
provides full PoE+ power simultaneously to all RJ-45 ports.
The GPoE+/Mi functions can be configured using easily
accessible DIP-switches or using Web, Telnet or Serial
Console management interfaces. The IP-based web and
Telnet management can be accessed through any of the
Ethernet RJ-45 or fiber ports and facilitates the configuration
and real-time operation monitoring of each port.
The RuggedNet GPoE+/Mi is a Layer 2 Ethernet switch that
can be configured in Directed Switch mode. As a Layer 2
Ethernet switch, frames are forwarded to any port based on
their MAC address. In Directed Switch mode, multicast traffic
(such as video) is directed only to the appropriate fiber port,
preventing the flooding of copper ports.
Models with two fiber ports support Dual Device Mode that
enables the GPoE+/Mi to operate as two independent and
isolated switches. Models with two fiber ports also support
redundant fiber uplinks for critical applications that require
protection and sub-50ms restoration in the event of a fiber
failure. The second fiber port may also be used to daisy-chain
multiple RuggedNet PoE fiber switches, or it may be used as
another switch port.
The RuggedNet GPoE+/Mi is available with fixed ST, SC, and
LC connectors or Small Form Pluggable (SFP) transceivers.
Fiber ports support multimode or single-mode and dual fiber
or single-fiber with distances up to 140 km. SFPs support a
variety of distances in standard and CWDM wavelengths.
SFPs not included
KEY FEATURES
■■ Managed Ruggedized Ethernet Power Sourcing
Equipment (PSE) PoE/PoE+ switch
■■ Multiple port configurations:
• 1 Fiber + 4 RJ-45
• 2 Fiber + 4 RJ-45
• 1 Fiber + 8 RJ-45
• 2 Fiber + 8 RJ-45
■■ Management via Web, Telnet and serial interfaces
■■ Provides full PoE/PoE+ power simultaneously to all
Ethernet RJ-45 ports
■■ Configurable PoE Power Reset
■■ Supports ST, SC and LC fiber ports or SFP transceivers
■■ Fiber redundancy on models with two fiber ports
■■ Dual Device mode for operating as two separate switches
The GPoE+/Mi automatically negotiates and delivers the
power level required by its Powered Device (PD) partner.
When negotiating to PoE (IEEE 802.3af) it delivers up to
15.4 Watts per RJ-45 port. When negotiating to PoE+ (IEEE
802.3at) it delivers up to 30 Watts per RJ-45 port. To support
power for non-standard powered devices, each port can be
configured to be forced to deliver up to the 30 Watts of power.
■■ Directed Switch mode to prevent port flooding
The GPoE+/Mi features a remote PoE power reset function
that can be configured with a DIP-switch or via management.
This feature allows all PDs or individual PDs to be power-
■■ Industrial (-40 to 75ºC) operating temperature
■■ Supports jumbo frames up to 10,240 bytes
■■ Alarm contacts and sensors
■■ Isolated single or dual DC power for redundancy
■■ DIN-rail mountable
■■ Free 24/7/365 Technical Support
Цены и срок поставки уточняйте на сайте www.2test.ru, по телефону: + 7 495 215-57-17 или info@2test.ru
cycled and reset remotely to save time and expense by
eliminating the need to dispatch manpower to remote network
sites.
The compact RuggedNet Ethernet switches can be DIN-rail
mounted using the included DIN-rail mounting clip. They are
available with single or dual DC input power options.
Two contact-closure alarm relays are available to detect
user configured events. Relay contacts can be configured
for normally open or normally closed operation. One alarm
input is available for detecting external events such as door
open or closed.
MANAGEMENT
The IP-based web management provides easy access to all the
features of the GPoE+/Mi using any standard web browser.
Configuration
•
DIP-switch Configuration
•
Port Configuration
•
VLAN Configuration
•
IP Configuration
The management software provides intuitive and easy-tonavigate menu options for Status and Configuration screens.
•
User Configuration
•
Time & Date Configuration
Status
•
Firmware Update
•
System Status
•
System Maintenance
•
System Information
•
Port Statistics Overview
•
Port Statistic Detailed
•
SFP Port Information statistics
•
Contact Closures
IP-based web management provides remote management of
the GPoE+/Mi compact PoE fiber switches, and provides the
ability to remotely monitor status and configure hardware/
software parameters.
Цены и срок поставки уточняйте на сайте www.2test.ru, по телефону: + 7 495 215-57-17 или info@2test.ru
APPLICATIONS
Dual Device Mode
Directed Switch Mode
For secure applications requiring two separate network
domains over fiber runs to the same location and independent
connectivity to the Powered Devices, the GPoE+/Mi can be
configured in Dual Device Mode.
In some networks, video cameras broadcast a single multicast
video stream to the entire network, and the video stream is
received by all of the destinations. This multicast video can
cause port flooding on other network devices (including other
cameras, printers and workstations). To avoid this, multicast
traffic is routed only to ports where the destination devices
are connected.
The GPoE+/Mi can be configured to operate in Directed Switch
Mode, which directs video traffic only to the uplink fiber port,
as shown in the diagram below, preventing the multicast video
traffic from flooding other network ports.
The GPoE+/Mi provides separate and independent data
traffic paths between the two fiber links and four or eight
RJ-45 ports. In the example below, the green lines represents
one independent domain and the purple lines represent the
other independent domain.
Daisy Chain Application
In this industrial manufacturing application example, RuggedNet GPoE+/Mi PoE fiber switches are deployed along an assembly
line. Gigabit fiber is distributed from a fiber switch at a network hub location to RuggedNet GPoE+/Mi PoE switches with dual
fiber ports that enable a fiber daisy chain with multiple locations. Each RuggedNet GPoE+/Mi provides fiber data connectivity
and PoE+ power for IP cameras and Wi-Fi access points at each location.
Цены и срок поставки уточняйте на сайте www.2test.ru, по телефону: + 7 495 215-57-17 или info@2test.ru
SPECIFICATIONS
Standards and Compliances*
UL 60950-1
RuggedNet GPoE+/Mi
Description
10/100/1000BASE-T to 1000BASE-X
Ruggedized Managed PoE+ Ethernet Switch
IEC 60950-1:2005+A1:2009 and
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
CE Mark
Standard
Compliances
IEEE 802.3, IEEE 802.3af (15.40 watts max),
IEEE 802.3at (30 watts max)
EMC
EN 55032/24
Environmental
REACH, RoHS2 and WEEE
EMI
CISPR 32, FCC 47 Part 15 Subpart B Class A
PoE Modes
IEEE Alternate A (Alt A)
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
Management
Web, Telnet, Serial Console
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
Frame Size
Up to 10,240 bytes
Copper:
Port Types
Cable Types
DC Power
Requirements
Dimensions
10/100/1000BASE-T (RJ-45)
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: Signal: 10 V
IEC 61000-4-8 ( Magnetic Field)
Serial:
RJ-45
IEC 61000-4-11 (General Immunity in Industrial
Environments )
EIA/TIA 568A/B, Cat 5 UTP and higher
Fiber:
Multimode: 50/125, 62.5/125µm
Single-mode: 9/125µm
Serial:
Category 3 and higher
DC Input:
(4 RJ-45 Ports)
+/-46 to +/-57VDC1;
2.7A @ 48VDC
2 Pin Terminal (isolated)
(8 RJ-45 Ports)
5.2A @ 48VDC
2 Pin Terminal (isolated)
W: 1.5” x D: 5.5” x H: 5.14”
L: 38.1 mm x B: 139.7 mm x H: 130.5 mm
4 RJ-45 Ports:
8 RJ-45 Ports:
Operating
Temperature
-40 to 75°C (-20°C cold start)
TBD lb.; TBD grams
TBD lb.; TBD grams
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4,000m (operational)
Warranty
EMS
1000BASE-X (ST, SC, LC, SFP)
Weight
MTBF (hours)
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
Fiber:
Copper:
1
Safety
4 RJ-45 Ports:
8 RJ-45 Ports:
IP Rating
IP40 Protection
* Pending
Alarm Contacts and Sensors
Alarm Contact (Output)
2 form C Relays for Normally Open and
Normally Closed Operation
110VDC/125VAC Maximum Voltage
2A Maximum Current
Alarm Sensor (Input)
2.0ma @ 3.3VDC Closure Detection
DC Power: TBD
DC Power: TBD
5 year product warranty with 24/7/365 free Technical Support
A minimum of 52VDC is required to guarantee 25.5 watts at 100 meters on Cat 5 or better cable.
Цены и срок поставки уточняйте на сайте www.2test.ru, по телефону: + 7 495 215-57-17 или info@2test.ru
ORDERING INFORMATION
RuggedNet GPoE+/Mi 4 Port - IEEE 802.3at PoE+
95xx-x-xx-xZ
Connector Type
Fiber
Type
Distance
1
Single DC 2-Pin Terminal Connector
2
Dual DC 2-Pin Terminal Connectors
Tx
Lambda
Rx
Lambda
Min. Tx
Power
Max. Tx
Power
Min. Rx
Power
Max. Rx
Power
Min
Attenuation
Link
Budget
(nm)
(nm)
(dBm)
(dBm)
(dBm)
(dBm)
(dB)
(dB)
ST
SC
LC
SFP
9540-0-14
9542-0-14
9546-0-14
-
850
850
-10
-4
-17
-3
-
7
-
-
9546-0-24
-
850
850
-10
-4
-17
-3
-
7
MM/DF
220/550m
1
MM/DF
(x2)
220/550m
1
MM/DF
2km
-
9542-6-14
-
-
1310
1310
-9.5
-3
-19.5
-3
-
10
SM/DF
12km
9541-1-14
9543-1-14
9547-1-14
-
1310
1310
-9.5
-3
-19.5
-3
-
10
SM/DF
(x2)
12km
-
-
9547-1-24
-
1310
1310
-9.5
-3
-19.5
-3
-
10
SM/DF
34km
-
9543-2-14
-
-
1310
1310
-5
0
-23
-3
3
18
SM/DF
80km
-
9543-3-14
-
-
1550
1550
-5
0
-23
-3
3
18
SM/DF
110km
-
9543-4-14
-
-
1550
1550
0
5
-24
-3
8
24
SM/DF
140km
-
9543-5-14
-
-
1550
1550
2
5
-28
-8
13
30
MM/SF
220/550m
1
-
9550-0-14
-
-
1310
1550
-9
-3
-18
-3
-
9
MM/SF
220/550m1
-
9551-0-14
-
-
1550
1310
-9
-3
-18
-3
-
9
SM/SF
20km
-
9550-1-14
-
-
1310
1550
-9.5
-3
-20
-3
-
10.5
10.5
SM/SF
20km
-
9551-1-14
-
-
1550
1310
-9.5
-3
-20
-3
-
SM/SF
40km
-
9550-2-14
-
-
1310
1550
-3
0
-20
-3
3
17
SM/SF
40km
-
9551-2-14
-
-
1550
1310
-3
0
-20
-3
3
17
SFP (x1)
-
-
-
-
9559-0-14
SFP (x2)
-
-
-
-
9559-0-24
1
62.5/125µm, 100/140µm multimode fiber up to 220m. 50/125µm multimode fiber up to 550m. Refer to the fiber cable manufacturer for multimode distance specifications.
Цены и срок поставки уточняйте на сайте www.2test.ru, по телефону: + 7 495 215-57-17 или info@2test.ru
ORDERING INFORMATION
RuggedNet GPoE+/Mi 8 Port - IEEE 802.3at PoE+
95xx-x-xx-xZ
Connector Type
Fiber
Type
Distance
MM/DF
MM/DF
(x2)
1
Single DC 2-Pin Terminal Connector
2
Dual DC 2-Pin Terminal Connectors
Tx
Lambda
Rx
Lambda
Min. Tx
Power
Max. Tx
Power
Min. Rx
Power
Max. Rx
Power
Min
Attenuation
Link
Budget
ST
SC
LC
SFP
(nm)
(nm)
(dBm)
(dBm)
(dBm)
(dBm)
(dB)
(dB)
220/550m1
9540-0-18
9542-0-18
9546-0-18
-
850
850
-10
-4
-17
-3
-
7
220/550m1
-
-
9546-0-28
-
850
850
-10
-4
-17
-3
-
7
MM/DF
2km
-
9542-6-18
-
-
1310
1310
-9.5
-3
-19.5
-3
-
10
SM/DF
12km
9541-1-18
9543-1-18
9547-1-18
-
1310
1310
-9.5
-3
-19.5
-3
-
10
SM/DF
(x2)
12km
-
-
9547-1-28
-
1310
1310
-9.5
-3
-19.5
-3
-
10
SM/DF
34km
-
9543-2-18
-
-
1310
1310
-5
0
-23
-3
3
18
SM/DF
80km
-
9543-3-18
-
-
1550
1550
-5
0
-23
-3
3
18
SM/DF
110km
-
9543-4-18
-
-
1550
1550
0
5
-24
-3
8
24
SM/DF
140km
-
9543-5-18
-
-
1550
1550
2
5
-28
-8
13
30
MM/SF
220/550m1
-
9550-0-18
-
-
1310
1550
-9
-3
-18
-3
-
9
MM/SF
220/550m
-
9551-0-18
-
-
1550
1310
-9
-3
-18
-3
-
9
SM/SF
20km
-
9550-1-18
-
-
1310
1550
-9.5
-3
-20
-3
-
10.5
SM/SF
20km
-
9551-1-18
-
-
1550
1310
-9.5
-3
-20
-3
-
10.5
1
SM/SF
40km
-
9550-2-18
-
-
1310
1550
-3
0
-20
-3
3
17
SM/SF
40km
-
9551-2-18
-
-
1550
1310
-3
0
-20
-3
3
17
SFP (x1)
-
-
-
-
9559-0-18
SFP (x2)
-
-
-
-
9559-0-28
1
62.5/125µm, 100/140µm multimode fiber up to 220m. 50/125µm multimode fiber up to 550m. Refer to the fiber cable manufacturer for multimode distance specifications.
Цены и срок поставки уточняйте на сайте www.2test.ru, по телефону: + 7 495 215-57-17 или info@2test.ru