OPERATION MANUAL
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
Contents
Introduction
Dear SHARP customer.................................................................................................................. 1
Contents.......................................................................................................................................... 1
Precautions for daily use............................................................................................................... 3
Important safety precautions........................................................................................................ 4
Trademarks..................................................................................................................................... 5
Accessories.................................................................................................................................... 6
Preparation
Attaching the stand unit................................................................................................................ 7
How to make a simple platform.................................................................................................... 8
Handling and precautions with the wall-mounted TV................................................................ 8
Part names...................................................................................................................................... 9
TV (Side/Front).................................................................................................................. 9
TV (Rear)......................................................................................................................... 10
Remote control unit........................................................................................................ 11
Before turning on the power....................................................................................................... 12
Connecting external devices...................................................................................................... 13
Inserting a SD/SDHC memory card (commercially available)................................................. 14
Connecting a USB memory device............................................................................................. 14
Connecting to the Network......................................................................................................... 14
Inserting the batteries................................................................................................................. 15
Using the remote control unit..................................................................................................... 15
Cautions regarding the remote control unit.................................................................... 15
Turning the TV on/off................................................................................................................... 16
Running the TV for the first time..................................................................................... 16
Turning off the TV........................................................................................................... 16
User Guide.................................................................................................................................... 17
Watching TV
General.......................................................................................................................................... 18
Wallpaper setting............................................................................................................ 18
Skin setting..................................................................................................................... 18
Booting state.................................................................................................................. 18
Language........................................................................................................................ 18
Default input method...................................................................................................... 18
No signal power off......................................................................................................... 18
Sleep timer...................................................................................................................... 18
Video.............................................................................................................................................. 19
AV mode......................................................................................................................... 19
Contrast/Brightness/Tint/Sharpness/Colour/Backlight.................................................. 19
Colour temp. (Colour temperature)................................................................................. 19
Wide mode...................................................................................................................... 19
DNR................................................................................................................................ 20
Fine Motion..................................................................................................................... 20
Active contrast................................................................................................................ 20
Pixel Dimming................................................................................................................. 20
Reset............................................................................................................................... 20
Audio............................................................................................................................................. 20
AV mode......................................................................................................................... 20
Auto volume.................................................................................................................... 20
Bass/Treble/Balance...................................................................................................... 20
Surround sound............................................................................................................. 21
Reset............................................................................................................................... 21
1
Contents
Watching TV (Continued)
Channel......................................................................................................................................... 21
Auto search..................................................................................................................... 21
Digital setting.................................................................................................................. 21
Analogue setting............................................................................................................. 21
Channel edit.................................................................................................................... 22
Network......................................................................................................................................... 22
Apps.............................................................................................................................................. 22
Option............................................................................................................................................ 22
Digital audio language.................................................................................................... 22
Subtitle............................................................................................................................ 22
For hearing impaired....................................................................................................... 23
System.......................................................................................................................................... 23
System info..................................................................................................................... 23
Legal info........................................................................................................................ 23
Local update................................................................................................................... 23
System recovery............................................................................................................. 23
The added instruction for R/C buttons...................................................................................... 24
A ( Flashback )............................................................................................................... 24
e ( Mute )....................................................................................................................... 24
MPX ............................................................................................................................... 24
GUIDE............................................................................................................................. 24
EPG................................................................................................................................. 24
Network function
Connecting to the Network......................................................................................................... 25
Wired installation............................................................................................................ 25
Wireless installation........................................................................................................ 25
Network setting............................................................................................................................ 26
Ethernet network connection.......................................................................................... 26
Wireless network connection.......................................................................................... 26
Add network................................................................................................................... 26
Smart function
Local Apps.................................................................................................................................... 27
Multimedia.....................................................................................................................................27
Browser..........................................................................................................................................27
Input ............................................................................................................................................. 27
Store...............................................................................................................................................27
Installing Apps................................................................................................................ 27
Apps................................................................................................................................ 27
Text input.......................................................................................................................................28
Other useful features
Connecting a USB memory device............................................................................................. 29
Playing back files on a USB memory device..............................................................................29
Buttons for USB media operation.............................................................................................. 30
List of file formats compatible with USB mode.........................................................................31
Appendix
Troubleshooting........................................................................................................................... 33
Specifications............................................................................................................................... 34
Dimensional drawings................................................................................................................. 35
2
Precautions for daily use
Observe the following items
Maintenance of the cabinet
• When cleaning the cabinet, use a soft cloth (made of cotton, floss, etc.) to clean gently.
Do not use a dry or damp rag mixed with chemicals, as this could cause the ingredients of the cabinet body to deteriorate or crack.
• Be careful not to use an abrasive cloth for cleaning or clean with excessive force, as this could scratch the surface of the cabinet.
• If the cabinet is greatly soiled, clean with a soft cloth (made of cotton, floss, etc.) soaked with a small amount of diluted neutral
detergent and wrung out, and then clean with a soft dry cloth.
• Because the cabinet is made of plastic, solvents such as benzene, alcohol or thinner could cause it to deteriorate, or make its
coating come off. Therefore do not use such solvents to clean the cabinet.
• Because plasticizer is included in the plastics, deterioration or the coating peeling off could occur when the cabinet comes into
contact with some substances. Therefore keep it away from volatile substances such as insecticide. In addition, do not let it come
into contact with objects made of rubber, resin, etc. for a long time.
Maintenance of the LCD panel
• Before cleaning the LCD panel, be sure to turn off the TV set and unplug the power cord from the outlet.
• When cleaning the LCD panel, use a dry and soft cloth (made of cotton, floss, etc.) to clean the surface of the LCD panel gently. For
protecting the LCD panel, do not clean with a dirty cloth, detergent, or a dry or damp rag mixed with chemicals, as this could cause
peeling of the panel surface.
• Be careful not to clean with an abrasive cloth or with excessive force, as this could cause the panel surface to be scratched.
• If the LCD panel is greatly soiled, clean it gently with a soft cloth (made of cotton, floss, etc.) soaked with a small amount of water (Do
not clean with excessive force, so as to avoid the scratch of the panel surface).
• If dust sticks on the surface of the LCD panel, clean the panel with a commercially available cleaning brush (anti-static brush).
3
Important safety precautions
• Cleaning — Unplug the AC cord from the
AC outlet before cleaning the product.
Use a damp cloth to clean the product.
Do not use alcohol cleaners, spray
cleaners or chemical cloth when cleaning
because these types of materials may
damage the product.
• Water and moisture — Do not use the
product near water, such as bathtub,
washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled
containers on this product. Do not place the
product under air conditioner, humidifier
and so on. The water may spill onto the
product causing fire or electric shock.
• Stand — Do not place the product on
an unstable cart, stand, tripod or table.
Doing so can cause the product to fall,
resulting in serious personal injuries as
well as damage to the product. Use only
a cart, stand, tripod, bracket or table
recommended by the manufacturer or
sold with the product. When mounting the
product on a wall, be sure to follow the
manufacturer’s instructions. Use only the
mounting hardware recommended by the
manufacturer.
• When relocating the product placed on a
cart, it must be moved with utmost care.
Sudden stops, excessive force and uneven
floor surface can cause the product to fall
from the cart.
• Ventilation — The vents and other openings
in the cabinet are designed for ventilation.
Do not cover or block these vents and
openings since insufficient ventilation can
cause overheating and/or shorten the life
of the product. Do not place the product
on a bed, sofa, rug or other similar surface,
since they can block ventilation openings.
This product is not designed for built-in
installation; do not place the product in
an enclosed place such as a bookcase or
rack, unless proper ventilation is provided
or the manufacturer’s instructions are
followed.
• In case the product is dropped and the
cabinet is damaged, be sure to turn off
the power of the product, and unplug
the power cord. If you continue to use
the product, it may cause fire or electric
shock.
• Do not open the rear cover of the cabinet
to reconstruct the circuits. There exists high
voltage within the cabinet and it may cause
electric shock and injury. If maintenance is
required, contact your dealer.
4
• The LCD panel used in this product is made
of glass. Therefore, it can break when the
product is struck forcefully or with a sharp
object. If the LCD panel is broken, be careful
not to be injured by broken glass.
• Heat sources — Keep the product away
from heat sources such as radiators,
heaters, stoves and other heat-generating
products (including amplifiers)
• To prevent fire, never place any type of
candle or naked flames on the top or near
the TV set.
• To prevent fire or shock hazard, do not
place the AC power cord under the TV set
or other heavy items.
• Do not place heavy objects on this
product or stand on it. Doing so
could cause injury if the product
overturns. Take special care near
children and pets.
• Unplug the power cord before you move
the TV set. If not unplugged beforehand,
the power cord may become damaged and
cause electric shock.
The LCD panel is a very high technology product with
8,294,400 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few
non-active pixels may appear on the screen as a fixed
point of blue, green or red.
This is within product specifications and does not
constitute a fault.
Precautions when transporting the
TV
• When transporting the TV, never carry it by
holding or otherwise putting pressure onto
the display.
Be sure to always carry the TV by at least
two people holding it with two hands — one
hand on each side of the TV.
• Do not display a still picture for a long time, as this could cause
an afterimage to remain.
• Install the product on the place where the AC cord can be
unplugged easily from the AC outlet.
NOTE
• The above are pictures for reference only; the actual item might be
different.
Trademarks
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc. © DTS,
Inc. All Rights Reserved.
• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
• SDHC logo is a trademark of SD-3C,LLC.
• MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
DISCLAIMERS
• This SHARP device facilitates the access to content and services provided by third parties. The content and services
accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party
content and services must be in accordance with any authorization or terms of use provided by such content or service
provider. SHARP shall not be liable to you or any third party for your failure to abide by such authorization or terms of
use. Unless otherwise specifically authorized by the applicable content or service provider, all third party content and
services provided are for personal and non-commercial use; you may not modify, copy, distribute, transmit, display,
perform, reproduce, upload, publish, license, create derivative works from, transfer or sell in any manner or medium any
content or services available via this device.
• SHARP is not responsible, nor liable, for customer service-related issues related to the third party content or services.
Any questions, comments or service-related inquiries relating to the third party content or service should be made
directly to the applicable content or service provider.
• You may not be able to access content or services from the device for a variety of reasons which may be unrelated to
the device itself, including, but not limited to, power failure, other Internet connection, or failure to configure your device
properly. SHARP, its directors, officers, employees, agents, contractors and affiliates shall not be liable to you or any
third party with respect to such failures or maintenance outages, regardless of cause or whether or not it could have been
avoided.
• All third party content or services accessible via this device is provided to you on an “as-is” and “as available”
basis and SHARP and its affiliates make no warranty or representation of any kind to you, either express or implied,
including, without limitation, any warranties of merchantability, non-infringement, fitness for a particular purpose or any
warranties of suitability, availability, accuracy, completeness, security, title, usefulness, lack of negligence or error-free
or uninterrupted operation or use of the content or services provided to you or that the content or services will meet your
requirements or expectations.
• SHARP is not an agent of and assumes no responsibility for the acts or omissions of third party content or service
providers, nor any aspect of the content or service related to such third party providers.
• In no event will SHARP and/or its affiliates be liable to you or any third party for any direct, indirect, special, incidental,
punitive, consequential or other damages, whether the theory of liability is based on contract, tort, negligence, breach of
warranty, strict liability or otherwise and whether or not SHARP and/or its affiliates have been advised of the possibility
of such damages.
• The operation manual has been collated and checked strictly. Due to factors such as software upgrading,SHARP can not
guarantee that the actual operation keeps pace with the manual description.
5
Accessories
Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit
“AAA” size battery (g2)
Operation manual
Used with batteries inserted.
Page 11
Page 15
Stand unit
“L”Stand
“R”Stand
Supporting post(x2)
Page 7
6
AC cord
Screws (x12)
Please use the AC cord supplied with
the TV.
Preparation
Attaching the stand unit
• When you attach the stand unit, put the TV on a flat surface.
• Before attaching (or detaching) the stand unit, unplug the AC power cord from the AC power outlet.
• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
• Attach the stand unit in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand unit may result in the TV falling over.
1
1Insert the supporting post "R" into the foam
block as shown in the figure below.
2
Place the TV on a flat surface with soft cushion
on top of it. Insert the stand unit into the slot
on the bottom of the TV while holding the
stand unit to avoid it falling over.
Insert the rest of four screws into the four holes
on the back of the TV, and tighten them.
FRONT
Screws
2As illustrated in the following figure, attach
the "R" stand onto the supporting post"R".
Insert the four screws into the four holes on
the bottom of the stand, and tighten them.
• To install the stand correctly, hold the stand
with one hand securely, and tighten the
screws with the other hand.
Soft cushion
Screws
“L”&“R” position
NOTE
• When installing the stand unit, you need to put your TV on a
flat surface. Before that, put a soft cushion on the surface.
• To detach the stand unit, perform the steps in reverse order.
• The angle of the stand unit is not adjustable.
• A screwdriver is not supplied with this product.
• During installation, please be careful to avoid getting your
hand trapped between the TV bottom and the floor.
3According to the steps 12, install the
other stand "L".
7
Preparation
How to make a simple platform
To make such a simple platform, you need to use the packing box and the three foam blocks inside it: TOP-L,
TOP-C and TOP-R.
1
As shown in the following figure, remove the
three foam blocks TOP-L, TOP-C and TOP-R
on the top.
3
1 As shown in Figure A, reassemble the packing
box from the side, and place it face down.
2 Attach the foam blocks TOP-L and TOP-R onto
the right side and left side of the packing box
respectively ( as shown in Figure B ).
3 Insert the foam block TOP-C into the packing box
( as shown in Figure B ). Now, a simple platform
is ready.
Front
Figure A
2
As illustrated in the following figure,
disassemble the packing box from one side.
Figure B
NOTE
• Put the platform on the flat floor after you have made it.
• When installing the stand, you need to put the TV face
down on the simple platform. Before that, put a shock pad
on the platform to protect the screen.
• The simple platform is just for temporary use. Do not apply
any load exceeding the weight of the LCD TV onto this
platform.
Handling and precautions with the wall-mounted TV
• You can mount the TV on the wall using the optional bracket.
• For details, refer to the instructions supplied with the optional bracket.
CAUTION
• This TV should be mounted on a wall only with a wall mount bracket recommended by SHARP. The use of other wall
mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skills that should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using a SHARP recommended bracket to mount the TV
• You can ask a qualified service professional about using a SHARP recommended bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
8
Preparation
Part names
TV (Side / Front)
1
2
3
4
5
6
1POWER (On/Off) button
2MENU button
3INPUT button
4CH r/s (Channel up/down) buttons
7
5 VOL k/l (Volume up/down) buttons
6Remote control sensor
7 Power indicator
• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the
actual operations.
9
Preparation
TV (Rear)
USB 1 terminal
Headphone
SD/SDHC card slot
USB 2 terminal
AV input terminal
HDMI 1 terminal
Antenna terminal
(ATV/DTV)
COMPONENT input
terminal
LAN terminal
For service HDMI 2 terminal
terminal
HDMI 3 terminal
Regarding the headphone jack
• Use headphones with a stereo mini plug (Ø 3.5 mm).
• Be sure to unplug headphones from the jack when they are not in use.
• The speakers do not output volume when headphones are plugged in.
10
Preparation
Remote control unit
1
2
13
14
15
16
3
4
17
5
6
18
7
8
9
10
19
20
21
22
23
11
12
24
25
26
27
10 MULTIMEDIA
Access to multimedia player. (See page 29.)
11 BROWSER
Start browser. (See page 27.)
12 SLEEP
Set the sleep timer. (See page 18.)
13 [ SUB.T(Subtitle)
Switch subtitles. (See page 22.)
14 INFO
DTV only: Display the programme information.
15 GUIDE
DTV only: To display programme list. (See page 24.)
16 EPG
DTV only: To display channel list screen. (See page 24.)
17 DELETE
Delete the characters. Press it continually to delete characters
quickly.
18 DISPLAY
Display the channel or input information.
19
(INPUT)
Select an input source. (ATV, DTV, HDMI1, HDMI2, HDMI3,
Component, AV.) (See pages 13, 27.)
20 CHr/s
TV input mode: Select the channel.
21 MENU
Display the menu list.
22 SETTING
Show the App's menu.
23 a/b/c/d (Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
24 RETURN
Return to the previous menu screen.
25 AV MODE
Select a AV mode. (See page 19.)
26 WIDE
Change the wide image mode. (See pages 19, 20.)
27 Colour Buttons (R / G / Y / B)
The coloured buttons are used to select correspondingly to
the coloured items on the screen.
1
2
3
4
POWER (Standby/On)
To switch the power on and off. (See page 16.)
ATV (Analogue TV)
Press to access analogue TV mode.
DTV (Digital TV)
Press to access digital TV mode.
0-9
Set the channel.
A Flashback
Press to return to the previous selected channel or external
input mode. (See page 24.)
5 G, H, dg, J
(Rewind, Stop, Play/Pause, Fast-forward)
Play in Multi Media Player. (See page 30.)
6 MPX
Select the sound multiplex mode. (See page 24.)
7 e (Mute)
Mute the sound. (See page 24.)
8 VOLk/l
Set the volume.
9 SMART
Display the smart home. (See page 27.)
11
Preparation
Before turning on the power
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
• If there are any protective plastic sheets on the TV cabinet, please take them off before connecting.
1
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Standard
DIN45325 plug
(IEC169-2)
75-ohm coaxial
cable (round cable)
Antenna cable
(commercially available)
To antenna terminal
Room antenna terminal
(75-ohm type)
2
Connecting external devices
See page 13 for connecting external equipment, such as a VCR and DVD player.
3
Plug the AC cord into the AC outlet.
TV (rear view)
AC outlet
AC cord
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
4
Bundling the cables
As the picture illustrated, insert the cable clip into the hole on the TV, and put the cable into the cable clip
for banding.
CAUTION
• To prevent risk of electric shock , do not touch un-insulated parts of any cables with the AC cord connected.
12
Preparation
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, Digital TV Set Top Box (STB), game
console, camcorder, DVD player and PC. To view external source images, select the input source from
on the
remote control unit or INPUT on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV Set Top Box (STB), PC or other external equipment.
• Refer to the relevant operation manual (Digital TV Set Top Box (STB), VCR, DVD player, etc.) carefully before making
connections.
w When using HDMI cable (commercially available)
Digital TV STB/VCR/Game
console/Camcorder/DVD
Player/PC
NOTE
• When using a TV set-top box to watch TV programs, use the set-top box remote control to switch channels.
w When using component cable (commercially available)
Audio-L(White)
Audio-R(Red)
R– AUDIO – L PR
Y(Green) PB(Blue)
PB
Y
Digital TV STB/VCR/Game
console/Camcorder/DVD
Player
PR(Red)
NOTE
• Insert the terminals by colour.
w When using AV cable (commercially available)
Audio-R(Red)
Audio-L(White)
Video(Yellow)
Digital TV STB/VCR/
Game console/
Camcorder/DVD
Player
NOTE
• Insert the terminals by colour.
13
Preparation
Inserting a SD/SDHC memory card (commercially available)
It provides access to Apps ,video,music,and other files in SD/SDHC memory cards.
Insert a SD/SDHC memory card that stores your files into the SD slot. Refer to the method of playing files stored in
the USB device specified on page 29 for details.
NOTE
• Insert the memory card into the slot in the direction shown in the figure.
• The SD slot supports SD and SDHC memory cards. However some memory cards may not be supported.
• This product supports memory cards with a maximum storage of 32 GB. We recommend that you use a memory card with at
least a speed of Class 4 for a higher read-write speed, thus guaranteeing the system performance.
• Unplug the memory card after you have safely unloaded it or the TV has been turned off.
• Do not unplug the memory card while data is being transferred. Otherwise the TV may malfunction.
• Regularly back up data in the memory card to prevent data corruption or operating errors of the TV. (SHARP shall not bear
any responsibility for data corruption or destruction.)
Connecting a USB memory device
See page 29.
Connecting to the Network
See pages 25 to 26.
14
Preparation
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1 Open the battery cover.
2 Insert the two supplied “AAA” size batteries.
3 Close the battery cover.
• Place batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Using the remote control unit
Use the remote control unit by pointing it towards the
remote sensor window.
Objects between the remote control unit and sensor
window may prevent proper operation.
5 meters
Remote control sensor
Cautions regarding the remote control unit
• Do not subject the remote control unit to shock.
In addition, do not soak the remote control unit with liquids or place it in
an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor
window of the TV is under direct sunlight or strong lighting. In such
cases, change the angle of the lighting or TV, or operate the remote
control unit closer to the remote sensor window.
15
Preparation
Turning the TV on/off
POWER
button
POWER
button
Running the TV for the first time
After inserting the AC cord, press POWER on the TV.
• The power indicator turns green. TV is switched on (After
several seconds, an image appears with sound.)
• You can switch the TV to standby by pressing POWER on
the remote control or the POWER on the TV. Turning off the TV
If the TV is switched on, press POWER on the remote
control or the POWER on the TV:
• TV is switched into standby and the image disappeared.
• The power indicator turns to red from green. Press
POWER on the remote control or the POWER on the TV
to turn on the TV . • If pull out the AC cord and then plug it, the power indicator
turns to red. Press POWER on the remote control or the
POWER on the TV to turn it on.
16
w Power indicator
Off
Power off
Red
TV is in standby
Green
TV is switched on
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• A small amount of electric power is still consumed even the
TV is in standby mode.
• If TV loses power in special circumstances (such as power
outage or grid fluctuations, etc.), TV may not work well
when TV is switched on again. Please try to power off the
TV (by the POWER key on the TV or the POWER on the
remote control) or unplug and replug the AC cord to restart
the TV.
• It is a normal phenomenon when the TV temperature rises
in the process of watching TV.
• Please do not cut the power off casually in the process
of switching on or switching off the TV, running APPS or
updating, otherwise TV system could not work rightly.
Please turn off TV after closing all APPS.
Preparation
User Guide
When the TV powers on for the first time after
purchase, the setting wizard appears. Follow the
menus and make the necessary settings one after
another.
Confirm the following before turning on the
power
2
w TV Channels Setting
1
Press POWER on the TV.
• It displays the boot screen , and then “Language
Setting” appears.
• It may cost a little time when TV is switched on for
the first time. Please wait patiently.
2
1
2
When the screen displays “Language Setting”,
press c/d on the remote control to select
“ 繁體中文”,“简体中文 ” or “EN” , and then
press ENTER.
1
When the screen displays “Start Settings” ,
press c/d on the remote control to select
“Next” and then press ENTER.
2
If you want to return to “Language Setting”,
press c/d on the remote control to select
“Back”, and then press ENTER.
After the search, press c/d on the remote
control to select “Next”, and then press
ENTER into “Network Setting” .
If you want to return to “Mode Setting”, press
c/d on the remote control to select “Back”,
and then press ENTER.
w Network Setting
1
When the screen displays “Network Setting”,
press c/d on the remote control to select
“Ethernet” or “Wi-Fi” to connect the network.
• Ethernet includes “Auto” and “Manual ”. Please
see page 26.
• If you want to return to “TV Channels Setting”,
press c/d on the remote control to select “Back”,
and then press ENTER.
If you want to exit User Guide, press
a/b/c/d on the remote control to select
“Exit”, and then press ENTER.
w Start Settings
When the screen displays “TV Channels
Setting”, press c/d on the remote control to
select “Start” and then press ENTER.
• The TV searches for sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial channel in progress, press c/d on the remote control to select “Pause”, and
then press ENTER. Press c/d on the remote
control to select “Resume” to continue previous
scan, and then press ENTER.
• If you select “Skip” and press ENTER, TV will skip
“TV Channels Setting” into “Network Setting”.
• After the search , It appears “Scanned TV
Channels”.
• Is the antenna cable connected?
• Is the AC cord plugged in?
w Language Setting
If you want to return to “Start Settings”, press
c/d on the remote control to select “Back”,
and then press ENTER.
2
Press a/b on the remote control to select
“Finish”, and then press ENTER.
w Mode Setting
1
When the screen displays “Mode Setting” ,
press c/d on the remote control to select
“Home” or “Store” , and then press ENTER.
• Please select “Home” when you watch TV at
home. “Store” is only for retail store displays.
• “Store”: “DYNAMIC (Fixed)” will be the default
value for the “AV mode” setting. If the “AV mode”
is changed, the TV will automatically switch back
to “DYNAMIC (Fixed)” when there is no further
change to TV setting for 10 minutes.
• “Home”: “STANDARD” will be the default value for
the “AV mode” setting.
17
Watching TV
You can set your TV as you desired by pressing
MENU.
General
For general setting.
2
Press a/b to select “Language”.
3
Press c/d to select desired language listed
on the screen.
NOTE
• Only after restarted the TV, the language of the system can
be changed.
Default input method
For setting input method.
the “Menu”, press a/b to select “General”,
1 In
and then press ENTER.
Wallpaper setting
You can change the wallpaper of smart home.
the “Menu” , press a/b to select “General”,
1 In
and then press ENTER.
2
Press a/b to select “Wallpaper setting”, and
then press ENTER.
3
Press c/d to select “Starry Sky” or “Diamond
Shine”, and then press ENTER.
Skin setting
You can change the skin of smart home.
the “Menu”, press a/b to select “General”,
1 In
and then press ENTER.
2
Press a/b to select “Skin setting”, and then
press ENTER.
3
Press c/d to select “Colour Surge” or “Minty
Fresh”, and then press ENTER.
2
Press a/b to select “IME setting”, and then
press ENTER.
3
Depending on your preferences, press a/b
to select desired input method listed on the
screen, and then press ENTER. Press
RETURN to save and exit.
NOTE
• The initial installation of the TV is “IQQI-Chinese Pro”.
• If you use any other input method, SHARP can not
guarantee its compatibility with television system.
No signal power off
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals.
the “Menu”, press a/b to select “General”,
1 In
and then press ENTER.
2
Press a/b to select “No signal power off”.
3
Press c/d to select “Off” or “On”.
Booting state
You can set booting state.
the “Menu”, press a/b to select “General”,
1 In
and then press ENTER.
2
Press a/b to select “Booting state”.
3
Press c/d to select “TV” or “Smart home”.
• “TV”: When turn on the TV, It displays TV mode.
• “Smart home”: When turn on the TV, it displays
the smart home.
Language
You can select a language from the menu.
Select from among 3 languages: English, 繁體中文 ,
簡體中文 .
the “Menu”, press a/b to select “General”,
1 In
and then press ENTER.
18
• Five minutes before the power shuts down, the
remaining time displays every minute.
Sleep timer
Auto power-off at a designated time.
the “Menu”, press a/b to select “General”,
1 In
and then press ENTER.
2
Press a/b to select “Sleep timer”.
3
Press c/d to select “Off”, “30min.”, “60min.”,
“90min.”, “120min.” or “150min.”. Or you can
press the SLEEP on the remote control unit to
select.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
Watching TV
Video
Selected item
Set the video as you desired .
cbutton
dbutton
Contrast
For less contrast.
For more contrast.
Brightness
For less brightness.
For more brightness.
Tint
Skin tones become
reddish.
Skin tones become
greenish.
Sharpness
For less sharpness.
For more sharpness.
Colour
For less colour
intensity.
For more colour
intensity.
Backlight
The screen dims.
The screen brightens.
Colour temp. (Colour temperature)
AV mode
The “AV mode” function enables you to select
appropriate settings for audio and video to account for
the system environment.
the “Menu”, press a/b to select “Video”,
1 In
and then press ENTER.
Press a/b to select “AV mode”.
2
3
Press c/d to select you want. Or you can
press the AV MODE on the remote control
unit.
Selected item
Description
STANDARD
For a highly defined image in a normally
bright room.
MOVIE
For viewing the movies.
GAME
Lowers image brightness for easier
viewing.
USER
Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing.
DYNAMIC
(Fixed)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
NOTE
• You can select a different “AV mode” item for each input
mode.
Contrast/Brightness/Tint/Sharpness/
Colour/Backlight
You can adjust the picture to your preference.
the “Menu”, press a/b to select “Video”,
1 In
and then press ENTER.
2
Press a/b to select the desired menu item,
and then press ENTER.
3
Press c/d to adjust the item. Press RETURN
to save and exit.
NOTE
• You can not setup backlight, when no signal to be
received.
Adjusts the colour temperature to give the best white
image.
the “Menu”, press a/b to select “Video”,
1 In
and then press ENTER.
2
Press a/b to select “Colour temp.”.
3
Press c/d to select “High”, “Low”, “M-low”,
“Middle” or “M-high”.
Wide mode
You can select different picture sizes that account for
the kind of each picture.
the “Menu”, press a/b to select “Video”,
1 In
and then press ENTER.
2
Press a/b to select “Wide mode”, and then
press ENTER.
3
Press a/b to select you want. Or you can
press the WIDE on the remote control unit.
Selected item
Description
Normal
For 4:3 standard pictures. A side bar appears
on each side.
Zoom 14:9
For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also
see bars on the top and bottom with some
programmes.
Panorama
In this mode the picture is progressively
stretched toward each side of the screen.
Full
For 16:9 squeeze pictures.
Cinema 16:9
For 16:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
Cinema 14:9
For 14:9 letterbox pictures. Bars may appear
on the top and bottom with some programmes.
Dot by Dot
Display an image with the same number of
pixels on the screen (only when receiving 2160p
signal).
Underscan
Display with an underscan image only when
receiving a 720p / 1080i / 1080p signal.
Display with the High-Definition image adjusted
optimally. Noise may appear on the edge of the
screen with some programmes.
Auto
Keeps the original aspect ratio and enlarges the
picture as much as possible.
Original
Keeps the original aspect ratio and size, only
when receiving 2160p signal.
19
Watching TV
Reset
Normal
Cinema 14:9
Zoom 14:9
Panorama
Cinema 16:9
Full
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
• “Zoom 14:9” and “Cinema 14:9” are only available for the
DTV or ATV mode.
Reset all picture adjustment items to the factory preset.
the “Menu”, press a/b to select “Video”,
1 In
and then press ENTER.
2
Press a/b to select “Reset”.
3
Press c/d to select “Yes” or “No”, and then
press ENTER.
Audio
Set the audio as you desired .
DNR
Reduce noise on screen and produces a clearer video.
the “Menu”, press a/b to select “Video”,
1 In
and then press ENTER.
2
Press a/b to select “DNR”.
3
Press c/d to select “Auto” “High”, “Low” or
“Off”.
Fine Motion
Using the fine motion function can view the high speed
motion image more clearly.
the “Menu”, press a/b to select “Video”,
1 In
and then press ENTER.
2
Press a/b to select “Fine Motion”.
3
Press c/d to select “Standard”, “Advanced”
or “Off”.
Active contrast
Automatically adjust the contrast of an image
according to the scene.
the “Menu”, press a/b to select “Video”,
1 In
and then press ENTER.
2
Press a/b to select “Active contrast”.
3
Press c/d to select “On” or “Off”.
Pixel Dimming
Intelligently enhance the contrast of an image to
improve clarity.
the “Menu”, press a/b to select “Video”,
1 In
and then press ENTER.
2
Press a/b to select “Pixel dimming”.
3
Press c/d to select “High”, “Middle”, “Low”
or “Off”.
20
AV mode
Please see page 19.
Auto volume
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The automatic volume control (Auto
volume) reduces this problem by equalizing levels.
the “Menu”, press a/b to select “Audio”,
1 In
and then press ENTER.
2
Press a/b to select “Auto volume”.
3
Press c/d to select “On” or “Off”.
Bass/Treble/Balance
You can adjust the audio of the selected AV mode.
the “Menu”, press a/b to select “Audio”,
1 In
and then press ENTER.
2
Press a/b to select the desired menu item.
3
Press c/d to adjust the item.
Selected item
cbutton
dbutton
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left speaker
NOTE
• They cannot be changed during “DYNAMIC (Fixed)” mode.
Watching TV
Surround sound
The surround sound function produces a surround
effect from the speakers.
the “Menu”, press a/b to select “Audio”,
1 In
and then press ENTER.
Digital setting
You can set some DTV channel items manually.
the “Menu”, press a/b to select “Channel”,
1 In
and then press ENTER.
2
Press a/b to select “Surround sound”.
2
Press a/b to select “Digital setting”, and then
press ENTER.
3
Press c/d to select “On” or “Off”.
3
Press c/d to select the desired menu item,
and then press ENTER.
w Auto search
Reset
Reset all audio adjustment items to the factory preset
values.
the “Menu”, press a/b to select “Audio”,
1 In
and then press ENTER.
2
Press a/b to select “Reset”.
3
Press c/d to select “Yes” or “No”, and then
press ENTER.
Channel
Set the channel as you desired .
Use this menu to add new DTV services automatically
after auto installation has been completed.
w Manual search
Add new services within a specified frequency band.
w Signal info
Show the “Channel No.”, “Freq”, “Signal strength” and
“Signal quality” of the current program.
NOTE
• The values of “Signal strength” and “Signal quality” indicate
when to check the appropriate alignment of the antenna.
w Antenna power
Press c/d to select “On” or “Off”.
Selected item
Auto search
You can run auto installation again, even after setting
up the preset channels.
1
In the “Menu”, press a/b to select “Channel”,
and then press ENTER.
2
Press a/b to select “Auto search”, and then
press ENTER.
3
The TV searches for, sorts and stores all
the receivable TV stations according to their
settings and the connected antenna.
• Press RETURN to abort the auto installation in
progress.
NOTE
• Auto search can only search channels from the current
mode.
Description
On
Select “On” when your antenna is set-up
and connected independently.
Typical supply voltage: 5V
Typical supply current: 50mA
Off
Select “Off” when you do not need to
supply voltage to your antenna, i.e.
when your antenna is connected to a
community antenna. (The factory default
setting of this function is “Off”.)
Analogue setting
You can set some ATV channel items manually.
the “Menu”, press a/b to select “Channel”,
1 In
and then press ENTER.
2
Press a/b to select “Analogue setting”, and
then press ENTER.
3
Press c/d to select the desired menu item,
and then press ENTER.
w Auto search
Use this menu to add new ATV services automatically
after auto installation has been completed.
w Manual search
Press a/b to select your desired item, and then press
c/d to adjust the settings. Press RETURN to save
and exit.
21
Watching TV
Item
Description
Storage to
[1~99]
Save programme to your desired
channel number. Press ENTER to save.
Current CH
Select the channel you want to edit.
Colour system
Select the optimum colour system to
receive. (PAL, SECAM, NTSC)
Sound system
Select the optimum sound system
(Broadcasting system) to receive. (BG,
DK, I, MN)
Search
Start searching from current channel.
You can Search the next channel by
pressing c/d to adjust the frequency .
Fine-Tune
Tune the frequency of the stored channel
to your desired position.
Option
For setting other items.
Digital audio language
Channel edit
Use this menu to set up a channel individually.
the “Menu”, press a/b to select “Channel”,
1 In
and then press ENTER.
Set up to preferred multi audio languages to display if
the audio languages are available.
1
In the “Menu”, press a/b to select “Option”,
and then press ENTER.
2
Press a/b to select “Channel edit”, and then
press ENTER. Channel list appears.
2
Press a/b to select “1st Language” or “2nd
Language” from “Digital audio language” .
3
Press a/b to select the desired programme.
3
Press c/d to select the desired language.
w Delete
Channels can be erased individually.
Press R and then press c/d to select “Yes”, and
then press ENTER. Now you can erase the selected
channel.
w Label
You can change individual channel names.
Press G to start labelling. Press a/b/c/d to select a
character, and then press RETURN to save.
• Maximum 8 alphanumerics can be input.
• Labeling is only available for the ATV mode.
w Sort
Channel positions can be sorted freely.
Press Y to select the channel you want to move. Press
a/b to move it to the desired position, and then press
Y to save.
w Skip
Channels with “Skip” set to “On” are passed over
when using CHr/s even if selected while watching
the image from the TV.
Press B to skip the selected channel. Press B again to
cancel the skip.
Network
Please see pages 25 to 26.
Apps
Please see pages 27 to 28.
22
NOTE
• This function depends on audio language information from
broadcasters.
• If audio for the selected language is not included in a received
broadcast, audio will not be output for that language.
Subtitle
Setup preferred subtitle language if the subtitle
languages are available. You can switch subtitles by
pressing SUB.T.
1
In the “Menu”, press a/b to select “Option”,
and then press ENTER.
2
Press a/b to select “ 1st Language” or “2nd
Language” from “ Subtitle”.
3
Press c/d to select the desired language.
NOTE
• If subtitles for the selected language are not included in
a received broadcast, subtitles will not be shown for that
language.
Watching TV
For hearing impaired
If the broadcast includes subtitles for the hearing
impaired, they will take precedence over other
subtitles.
the “Menu”, press a/b to select “Option”,
1 In
and then press ENTER.
2
Press a/b to select “ For hearing impaired” .
3
Press c/d to select “On” or “Off”.
NOTE
• If the broadcast includes no subtitles for the hearing impaired,
they will not be displayed even when set to “On”.
System
You can view and set the info about the system.
System info
From here , you can view the Hardware info and
Software info.
Legal info
From here , you can view the open source licenses.
Local update
This function allows you to transform to the latest
software via a USB device.
the USB device containing the system
1 Insert
data file.
2
In the “Menu”, press a/b to select “System”,
and then press ENTER.
3
Press a/b to select “Local update”, and then
press ENTER.
4
Press c/d to select “OK” to update the
system. The TV restarts automatically, and the
software updating will be completed.
• This operation may take a while.
NOTE
• If the software is not compatible with the system, an error
message appears on the screen. Repeat step 1 and step 2
after pressing ENTER.
• When an error message displays, check to see if
• The USB device is inserted firmly.
• The USB memory has two or more software files.
• No software for updating the system exists in the USB
memory.
• The software file is broken.
• The software file is not compatible with your TV’s
software.
• Please do not turn off TV or execute other operations
during version up.
System recovery
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1
In the “Menu”, press a/b to select “System”,
and then press ENTER.
2
Press a/b to select “System recovery”, and
then press ENTER.
3
Press c/d to select “OK” or “Cancel”, and
then press ENTER .
23
Watching TV
The added instruction for R/C buttons
GUIDE
Display the channel list of DTV.
A (Flashback)
Press A to switch the currently tuned channel or
external input source to the previously tuned channel
or external input source.
1
Press A to switch the currently tuned channel
or external input source to the previously tuned
channel or external input source.
2
Press A again to switch back to the currently
tuned channel or external input source.
e(Mute)
Using e (Mute) on the remote control unit to mute the
current sound output.
1
Press e (Mute).
2
Press e (Mute) again to cancel the mute, the
sound can return to the original setting.
1
Press GUIDE, and then display the “Channel
List” of DTV on the screen.
2
Press a/b to select the desired channel , and
then press ENTER to switch to the selected
channel.
• When received a encryption program that cannot
be played, it will display the “key” icon.
EPG
The EPG(Electronic Programme Guide) is broadcasted
together with DTV. The TV screen shows the EPG
when the viewer presses EPG on the remote
control, provided that the TV is receiving the digital
broadcasting signal. The EPG enables you to check
the schedule of DTV, view detailed information.
• The sound is silenced.
• “ ” is displayed while the mute function is on.
MPX
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
Each time you press MPX the mode switches as
follows.
In the NICAM TV broadcasts
Signal
Mode switch
When receiving a
stereo signal
NICAM STEREO , MONO
When receiving a
bilingual signal
NICAM DUAL Ⅰ , NICAM DUAL Ⅱ ,
NICAM DUAL Ⅰ + Ⅱ , MONO.
When receiving a
monaural signal
NICAM MONO, MONO
In the TV mode of A2 TV broadcasts
Signal
Mode switch
When receiving a
stereo signal
STEREO, MONO
When receiving a
bilingual signal
CH A, CH B, CH AB
When receiving a
monaural signal
MONO
NOTE
• Select the sound multiplex for ATV only.
24
1
Press the EPG on the remote control to
display EPG screen.
2
Press a/b to select the desired channel , and
press ENTER. The programme of the selected
channel displays.
3
Press a/b/c/d and ENTER to display
programme information.
NOTE
• The time displayed on the EPG is information sent by the
TV station.
Network function
Connecting to the Network
To enjoy internet services, you need to connect the
TV to a router with a high speed connection to the
internet.
NOTE
• If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask your
internet service provider or telephone company.
• A stable connection speed is required to play back
streaming content, otherwise you may not be able to watch
normally.
Wired installation
Switch on the router (commercially available). Refer to
the router’s operation manual for switching on.
Connect the LAN terminal on the TV to the router
(commercially available) with a LAN cable (commercially
available).
w Wired connection overview
NOTE
• This TV has received the following certifications.
– Wi-Fi CERTIFIED™ (certification program from the Wi-Fi
Alliance®)
• A wireless LAN connection and performance cannot be
guaranteed for all residential environments. In the following
cases, the wireless LAN signal may be poor or drop, or the
connection speed may become slower.
– When used in buildings made with concrete, reinforced
steel, or metal.
– When placed near objects that obstruct the signal.
– When used with other wireless devices that emit the
same frequency.
– When used in the vicinity of microwave ovens and other
devices that emit a magnetic field, electrostatic charge, or
electromagnetic interference.
• Make sure the firewalls in your network allows access to
the TV wireless connection.
• Operations cannot be guaranteed when used with access
points that do not have Wi-Fi® certification.
• A wireless LAN access point is required to connect the
TV to the Internet using a wireless LAN. See the operation
manual of your access point for setup.
• A stable connection speed is required to play back
streaming content. Use a wired connection if the wireless
LAN speed is unstable.
• As there are lot of formats in the internet, some formats
may not be supported by this TV unit.
• Before transferring to a third-party or disposal, be sure to
initialise the wireless LAN settings.
w How to connect
LAN terminal
Router
LAN cable
(commercially available)
LAN
LAN
Wireless installation
Switch on the router (conmmercially available). Refer to
the router's operation manual for switching on.
#
! Wireless LAN router/access point
@ TV
# Network
25
Network function
Network setting
Select “Menu” in the smart home, and then press
ENTER. Press a/b to select “Network”, and then
press ENTER . It displays the connect format.
Ethernet network connection
1
Press a/b to select “Ethernet network
connection”, and then press ENTER.
2
Press c/d to adjust “Ethernet” to “On”.
w DHCP
Press a/b to select “DHCP”. Press c/d to select
“On”. System will attempt to obtain IP address and
other information automatically.
w Manual connection
Press a/b to select “DHCP”. Press c/d to select
“Off ”. You can setup IP address, Gateway, Subnet
mask, First DNS and Second DNS following the onscreen instructions. After setting, press a/b to select
“Save”, and now you can enjoy the internet services.
Wireless network connection
1
Press a/b to select “Wireless network
connection”, and then press ENTER.
2
Press c/d to adjust “Wi-Fi” to “On”, it
displays the nearly wireless network.
3
Press a/b to select an available wireless
network , and then press ENTER. If the
current network connection security is not
open, you should enter the password from
software keyboard by pressing ENTER on
the remote control. If the network connection
security is open, you can connect it directly.
Select “Refresh”, and then press ENTER, it
displays the “Wireless network list”.
NOTE
• You can press MENU to select "Network" to switch the
connection between Ethernet network connection and
Wireless network connection.
26
Add network
1
Select “Add network” , and then press
ENTER. You can add unbroadcast wireless
network manually.
2
Enter the information about the unbroadcast
wireless network , and then select “Save”. Now
the TV is connected to the unbroadcasted
wireless network.
Smart function
You can download and install amounts of Apps from
the third-party of the smart TV.
Press SMART to display the smart home.
Press SMART to start smart home. Select “Browser”,
and then press ENTER, or press BROWSER to start
browsing internet.
NOTE
• Please click the "Browser" icon on the launcher, then
download and install the browser at first time.
Input
NOTE
• To scan the information of the smart home, you must have
a broadband internet connection.
• SHARP is not responsible for the service of third-party.
• Parental consent is necessary for children to use the
internet service.
• Intelligent interface in the relevant content in the future will
do related adjustment, SHARP company reserves the right
to relevant adjustment without prior notice.
Select an input source (ATV, DTV, HDMI1, HDMI2,
HDMI3, COMPONENT, AV.) , and then press ENTER
on the remote control. You can also press
to
select an input source.
Local Apps
Here you can view the local Apps that have been
installed into the TV. You can start the games and local
Apps directly.
Store
Provide you mass Apps.
Press SMART into smart home .Select “Local Apps”,
and then press ENTER .Select the desired App, and
press ENTER to enjoy it.
NOTE
• SHARP is not responsible for the service of third-party.
• Some Apps can be improved operation experience by connecting a usb mouse.
Multimedia
You can enjoy photos, music and video from the external USB device .
Please see pages 29 to 30.
Browser
Press SMART into smart home. Select “Store”, and
then press ENTER .
Installing Apps
From “Store”, select the App you desired, and install it
according to prompt in the screen.
Apps
You could manage all Apps that have been
downloaded into TV.
Press MENU.
1
2
Press a/b to select “Apps”, and then press
ENTER.
3
Press a/b to select the items you want, and
then press ENTER.
27
Smart function
w Internal storage
From here, you can view the free space and the total
space of TV.
w SD card storage
Text input
The virtual keyboard appears when you press ENTER
to input text.
From here, you can view free space and the total
space of SD card.
w Install applications from unknown sources
From here, you can setup whether applications are
allowed to install from unknown sources.
w Default installation location
From here , you can setup the default installation
location. Select from among 3 locations: Default,
Internal, External.
w My Apps
It will display applications list that have been installed.
Operations such as “Force stop”, “Uninstall”, “Clear
cache” or “Move to SD card/Move to internal” can be
used to an application.
w Format SD card
Format SD card .
NOTE
• If you format SD card , the content stored in the SD
card will be deleted completely and the content is
unrecoverable. Please operate it carefully.
w Safely Remove SD
Remove SD card after you have safely unloaded it.
NOTE
• Do not unplug the memory card while data is being
transferred. Otherwise the TV may malfunction.
• Unplug the memory card after you have safely unloaded it
or the TV has been turned off.
• Please regularly back up data in the memory card to
prevent data corruption or operating errors of the TV.
(SHARP shall not bear any responsibility for data corruption
or destruction.)
28
It provides virtual keyboard input mode. In the process,
you can choose character by moving cursor, and press
ENTER to complete character input. At the same time,
you can change the input mode from virtual keyboard.
Other useful features
You can connect a USB memory device or a USB hard
disk drive (HDD) to the TV to enjoy viewing pictures,
listening to music, and watching videos.
Playing back files on a USB memory
device
NOTE
• Depending on the USB memory device, the TV may not be
able to recognise the data.
• It may take time to read the data if the USB memory device
contains many files or folders.
• External subtitles for some video files may not be
supported.
Connecting a USB memory device
Insert the USB memory device with recorded photos,
music or videos into the USB 1 or USB2 terminal on
the TV.
1
Press SMART to display the smart home,
select “Multimedia” and then press ENTER. Or
you can press MULTIMEDIA to display the
mode quickly.
2
Press a/b/c/d to select the device or disk
drive you want.
3
Press a/b/c/d to select the desired folder,
such as "File", "Picture", "Audio", "Video", and
then press ENTER. Select the desired file ,
and then press ENTER.
• Press “RETURN” on the remote control, you can
exit to the upper folder.
• The USB1 and USB2 terminals cannot be connected
with USB hard disk drives at the same time.
• When connecting a USB hard disk drive, be sure to
use a hard disk drive with an AC adapter.
• Do not remove the memory device from the TV
while transferring files.
• Do not insert and remove a USB memory device/
USB hard disk drive to and from the TV repeatedly.
• When using a card reader, be sure to insert Memory
first before using the card reader.
• The TV may not be able to recognise the card
reader.
• Please follow the rules below when the TV is
displaying the file of the USB device:
—Please do not turn off the TV directly.
—Please don’t disconnect the USB device directly.
—Please be sure to exit from USB interface before
removing the USB device, otherwise you may lose
the data , damage the device or TV system may not
work properly.
• If the TV connects with USB-HUB, the TV may not
be able to recognise all USB memory devices.
4
Press SETTING to display the USB media operation
menu when you view a photo or a video.
Press a/b to select the relevant functions, and
then press ENTER.
To know the buttons for USB media operation in
detail, please see page 30.
CAUTION
• Do not use the USB extension cable, otherwise it may
cause the TV does not work properly.
• Please insert the USB device after the TV is powered
on properly.
29
Other useful features
Buttons for USB media operation
Button/
menu
d/g
Movie
mode
3
Music
mode
3
Photo
mode
-
Go to the previous file.
-
3
-
Go to the next file.
-
3
-
Loop.
Each time you press ENTER, the mode will switch from Order play,
Repeating all songs, Play this song only once, Repeating current
song and Shuffle is on.
-
3
-
Playlist
Select a file from the playlist to start playback.
-
3
-
Press ENTER turn to Zoom In or Zoom Out.
Press RETURN to exit this mode.
-
-
3
Rotate the picture
Press c or a to roate the image 90 degress anticlockwise, and
press d or b to roate the image 90 degress clockwise.
Press RETURN to exit this mode.
-
-
3
Set the Time Interval and Switch Mode of the slide.
-
-
3
Set Subtitle On-off, Subtitle Select, Subtitle Switching, Subtitle
Search and Subtitle Advanced.
3
-
-
Select audio track.
3
-
-
Set the starting playback time.
3
-
-
3
-
-
Press ENTER to the previous file.
3
-
-
Press ENTER to the next file.
3
-
-
Fast
forward
Press d or
to fast forward.
3
3
-
Reverse
Press c or
to reverse.
Zoom
Rotation
Slide
Subtitle
Options
Audio
Options
Jump
Time
Description
Play/Pause.
Advanced Set Continue Play, Forward Rewind and Single Cycle.
Options
30
3
3
-
c
Go to the previous file.
-
-
3
d
Go to the next file.
-
-
3
Other useful features
List of file formats compatible with USB mode
w Supported video format
File
extension
Video decoder
Audio decoder
Subtitle
MPEG2 MP@HL
MPEG4 SP, MPEG4 ASP@Level 5
H.264 HP@Up to Level 4.1
Dolby Digital Plus
DTS
Dolby Digital
-
.mkv
H.264 HP@Up to Level 4.1
H.265(HEVC) MP / Main 10 Profile @
Up to Level 5 (4k2k 30 fps)
Dolby Digital Plus
DTS
Dolby Digital
-
.ts
MPEG2 MP@HL
H.264 HP@Up to Level 4.1
H.265(HEVC) MP / Main 10 Profile @
Up to Level 5 (4k2k 30 fps)
AVS Jizhun Profile @Level 6.0
Dolby Digital Plus
DTS
AAC
Dolby Digital
-
.trp
MPEG2 MP@HL
H.264 HP@Up to Level 4.1
H.264(AVC) MP@L4.1
-
-
MPEG2 MP@HL
Dolby Digital Plus
Dolby Digital
-
MPEG1
-
-
.wmv
Advanced Profile@Level 3
Simple Profile and Main Profile
-
-
.mov
MPEG4 SP, MPEG4 ASP@Level 5
H.264 HP@Up to Level 4.1
H.265(HEVC) MP / Main 10 Profile @
Up to Level 5 (4k2k 30 fps)
m-jpeg
Dolby Digital Plus
Dolby Digital
-
.mp4
MPEG4 SP, MPEG4 ASP@Level 5
H.264 HP@Up to Level 4.1
H.265(HEVC) MP / Main 10 Profile @
Up to Level 5 (4k2k 30 fps)
AAC
-
.3gp
H.264 HP@Up to Level 4.1
H.263
AAC
-
.flv
H.264 HP@Up to Level 4.1
-
-
VP8
-
-
MPEG2 MP@HL
-
-
.avi
.vob
.mpeg
.dat
.webm
.tp
31
Other useful features
w Supported audio format
File
extension
Audio decoder
.mp3
MPEG1 Layer 1/2/3
.flac
flac
.aac
AAC
.ogg
VORBIS
.wav
PCM
.m4a
AAC
.mid
MIDI
w Supported picture format
File extension
Picture decoder
PNG
4096*5760
BMP
6000*4000
GIF
4096*5760
JPEG
Progressive 4096*5760
baseline 4096*5760
NOTE
• USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
• Video in Motion JPEG format with a resolution higher than
1280x720 may not be played back correctly.
• Some file formats in the above list may not be played back
correctly (including images, sounds, subtitles, etc.).
• Depending on the bit rate, some files may not be played
back.
• The TV supports DTS encoded video files instead of DTS
surround sound formats.
• Some subtitles may not be displayed correctly and this may
affect the TV operation.
• Only show the compatible file format.
• According to different files, the displayed playback time
may be sightly different from the actual .
• The length of time information may not be displayed
correctly in some file.
32
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV
serviced.
Problem
Possible solution
• No power.
• Is the AC cord disconnected? (See page 12.)
• Has the power been turned on? (See page 16.)
• When the power switch does not work, remove the power plug and insert it again,
and press POWER on the TV after waiting more than five seconds.
• Unit cannot be operated.
• External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off or unplugging
the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
• Are batteries inserted with polarity (e, f) aligned? (See page 15.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light shining on the remote control sensor?
• Picture is cut off.
• Are screen mode adjustments such as picture size made correctly? (See pages 19
and 20.)
• Strange colour, light colour, or
dark, or colour misalignment.
• Adjust the picture tint. (See page 19.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 22.)
• Power is suddenly turned off.
• The unit's internal temperature has increased.
Remove any objects blocking the vent or clean.
• Is the sleep timer, no signal power off ? (See page 18.)
• No picture.
• Is the connection to external equipment correct? (See pages 13, 14 and 29.)
• Is the correct input selected? (See pages 10, 11, and 27.)
• Is the picture adjustment correct? (See page 19.)
• Is the antenna connected properly? (See page 12.)
• No sound.
• Is the volume too low? (See page 11.)
• Check the sound system setting. (See page 22.)
• Make sure that headphones are not connected. (See page 10.)
• Has the mute been opened. (See page 24.)
• The TV sometimes makes a
cracking noise.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV's
performance.
• Cannot select the desired channel. • Switch between Digital TV and Analogue TV modes. (See page 11.)
• Cannot connect to the Network
• Is the LAN cable connected correct. (See pages 25 and 26.)
• Check the “LAN setting”.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
33
Appendix
Specifications
Model
Item
LC-80UD30H
8,294,400 pixels (3840(H) x 2160(V))
Resolution
PAL / SECAM / NTSC 3.58 / NTSC 4.43 / PAL 60
Video colour system
TV function
TV tuning system
TVStandard
Analogue
PAL:BG, DK, I SECAM:BG, DK NTSC:MN
Digital
DTMB
Receiving
channel
VHF/UHF
44.25MHz-863.25 MHz
CATV
S1-S41ch (including Hyperband)
Digital terrestrial
broadcast
52.50MHz-866.00MHz
STEREO/BILINGUAL
NICAM: BG, I, DK ; A2 stereo: BG
Analogue
Auto preset 99 channel
Digital
Auto preset 999 channel
Audio amplifier
10W×2 (L / R)
Speaker
(100 mm x 45mm) x 2
Side
Terminals
Below
USB1
USB 2.0
Headphone
Ø 3.5 mm jack
SD
SD/SDHC
USB2
USB 3.0
AV INPUT
VIDEO in, AUDIO in
HDMI 1
HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz,
1080I/60Hz, 1080P/50Hz, 1080P/60Hz, 1080P/24Hz, 2160P/30Hz)
ANTENNA
UHF/VHF 75 Ω Din type
LAN (ETHERNET 10/100)
Network connector
COMPONENT INPUT
COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz),
AUDIO in
Special service terminal
Only for service
HDMI 3
HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz,1080I/50Hz, 1080I/60Hz,
1080P/50Hz, 1080P/60Hz, 1080P/24Hz, 2160P/30Hz)
HDMI 2
HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz,1080I/50Hz, 1080I/60Hz,
1080P/50Hz, 1080P/60Hz, 1080P/24Hz, 2160P/30Hz)
OSD language
English/Simplified Chinese/Traditional Chinese
Power requirement
AC 110-240 V, 50Hz
Power consumption (Standby)
480W (0.5W)
Weight
Without stand
52.0 kg
With stand
55.0 kg
Operating temperature
0 °C to + 45 °C
•As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without
prior notice.
34
Appendix
Dimensional drawings
Unit: mm
*1 Active area
*2 Thinnest part
35
Download PDF

advertising