Cisco Catalyst 3020 Blade Switch for HP c-Class - Space

QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Overview
The Cisco Catalyst 3020 Blade Switch for HP c-Class BladeSystem provides HP customers with an integrated
switching solution from Cisco Systems. This solution provides Cisco resiliency, advanced security and enhanced
manageability to the server edge while dramatically reducing cabling requirements. The Catalyst 3020 Blade Switch
capitalizes on your current Cisco network infrastructure to reduce the total cost of implementation and ownership. By
utilizing the advanced Cisco end-to-end management framework, customers can simplify current and future
deployments reducing implementation and management costs.
Flexible to fit your needs - The Catalyst 3020 Blade Switch is designed with sixteen internal 1Gb downlinks and eight
1Gb RJ-45 copper uplinks. Up to four uplinks can be optionally configured as fiber SX links. Two uplinks can optionally
be configured as internal cross-connects.
Figure 1 Catalyst 3020 Front View
1.
2.
3.
4.
5.
Switch Module
Release latch
UID LED
SFP Module Port LED
SFP Module Ports for SX Fiber
6.
7.
8.
9.
10
Gigabit Ethernet Port LEDs
Gigabit Ethernet RJ-45 Ports
Health LED
Mode Button
Switch LED Panel
What's New
Support for new HP ProLiant G7 server blades
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 1
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Overview
At A Glance
Performance
Wire speed switching on sixteen internal 1Gb ports.
Wire Speed switching on eight external 10/100/1000BASE-T ports. (Two of these ports can be used as crossconnects to provide failover protection).
Four external 10/100/1000 SFP based ports that can be configured in lieu of the 10/100/1000BASE-T ports to
support Fiber SX SFP modules from Cisco Systems.
One external console port.
Management
CiscoWorks Software that includes multilayer feature configurations such as routing protocols, ACLs, and QoS
parameters.
IOS CLI support providing a common user interface and command set with all Cisco routers and Cisco Catalyst
desktop switches.
The Catalyst Blade Switch 3020 supports an embedded Remote Monitoring (RMON) software agent for
enhanced traffic management, monitoring and analysis.
Security
VLAN - Virtual Local Area Network is a logical network topology configured on top of a physical network topology
which conserves bandwidth and improves security by limiting traffic to specific groups of devices.
Supports Cisco's Identity-Based Networking Services (IBNS) which prevents unauthorized network access and
insures that users get only their designated privileges.
Compatible with Cisco Secure Access Control Server (ACS) so that user security profiles and authentication
follow the user regardless of where they connect on the network.
Access Control Lists (ACL's) are maintained in hardware for maximum performance and can be used to guard
against denial-of-service and other attacks.
802.1x Port Security recognizes the MAC address of the device connecting to it and will set rights or limitations
based on predefined security thresholds.
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 2
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Models and Options
Models
Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem
Options
Cisco BLp-Class Ethernet Fiber SFP Switch
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
410916-B21
378929-B21
Page 3
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Standard Features
Compatibility
HP ProLiant Servers
HP Integrity Servers
ProLiant BL c-Class
Server Blade
Enclosures
ProLiant BL c-Class
Media Options
HP ProLiant BL2x220c G7
HP ProLiant BL2x220c G5
HP ProLiant BL260c G5
HP ProLiant BL280c G6
HP ProLiant BL420c Gen8
HP ProLiant 460c Gen8
HP ProLiant BL460c G7
HP ProLiant BL460c G6
HP ProLiant BL460c G5
HP ProLiant BL460c
HP ProLiant BL465c Gen8
HP ProLiant BL465c G7
HP ProLiant BL465 G6
HP ProLiant BL465 G5
HP ProLiant BL465c
HP ProLiant BL480c
HP ProLiant BL490c G7
HP ProLiant BL490c G6
HP ProLiant BL495c G6
HP ProLiant BL495c G5
HP ProLiant BL620c G7
HP ProLiant BL660c Gen8
HP ProLiant BL680c G7
HP ProLiant BL680c G5
HP ProLiant BL685c G7
HP ProLiant BL685 G6
HP ProLiant BL685 G5
HP ProLiant BL685c
NOTE: Some servers listed above may be discontinued.
HP Integrity BL860c Server Blade
HP Integrity BL860c i2 Server Blade
HP Integrity BL860c i4 Server Blade
HP Integrity BL870c Server Blade
HP Integrity BL870c i2 Server Blade
HP Integrity BL870c i4 Server Blade
HP Integrity BL890c i2 Server Blade
HP Integrity BL890c i4 Server Blade
NOTE: Some servers listed above may be discontinued.
HP BladeSystem c3000 Enclosure
HP BladeSystem c7000 Enclosure
Cisco Fiber SX SFP Module
Cisco Fiber LX SFP Module
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 4
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Standard Features
Required Network
Cabling
10Base-T
100Base-TX
1000Base-T
1000Base-SX
1000Base LX
Categories 3, 4 or 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
Category 5 UTP (100 meters)
EIA/TIA-568 100-ohm STP (100 meters)
50/125 µm Multimode Fiber, 400 MHz/Km (500 meters)
50/125 µm Multimode Fiber, 500 MHz/Km (550 meters)
62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters)
62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters)
Operates on standard single-mode fiber-optic link spans of up to 10
km and up to 550 m on any multimode fibers.
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 5
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Service and Support
Service and Support HP Care Pack Services: Packaged server and storage services for increased uptime,
productivity and ROI
When you buy HP server and storage products and solutions, it's also a good time to think
about what levels of support you may need. Our portfolio of service options reduce
deployment and management worries while helping you get the most out of your server and
storage investments. We take a holistic approach to your environment, bridging servers,
blades, storage, software and network infrastructures with our packaged HP Care Pack
Services for servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment warranties have
matured along with technology. Good news that can also create problems stemming from
depending on standard warranties designed to only protect against product defects and some
downtime causes. Using a standard approach to warranty uplifts, such as HP Care Pack
Services, helps reduce downtime risks and provides operational consistency for missioncritical and standard business computing.
HP Care Pack Services: Upgrading or extending standard server and storage
warranties cost effectively
HP recommends Proactive Care for your BladeSystem servers, enclosures and components
to prevent problems with proactive advice and assistance, resolve issues and rapidly recover
by connecting to HP's enhanced call experience and advanced technical expertise. In
addition with HP Proactive Select, you can acquire the specific proactive constancy and
technical services. HP Proactive Select menu offers a broad set of service options that you
can mix and match depending on your specific requirements. Proactive service options
include offers for server, storage, network, SAN device, software, environment and education
services.
HP server and storage lifecycle support services offers a full spectrum of customer care-from
technology support to complex migrations to complete managed services. HP Factory
Express provides customization, integration and deployment services for turnkey solutions.
HP Education Services offer flexible, comprehensive training on to help your IT staff get the
most out of your server and storage investments. HP Financial solutions extend innovative
financing and cost-effective asset management programs-from purchase to equipment
retirement.
Learn more: www.hp.com/services/servers and www.hp.com/services/storage
NOTE: Care Pack Services availability may vary by product and country.
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using
HP order configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at
http://www.hp.com/go/lookuptool
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 6
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Service and Support
Recommended HP Care Pack Services for optimal satisfaction with your HP
product
Recommended
Services
Hardware Options Support
HP Care Packs provide support for all HP-branded hardware options qualified for inclusion in
your server or storage solution. Any additional HP-qualified options installed within the server
are covered at the same service level and for the same period as the server and no
additional cost.
Help improve or maintain system uptime
Convenient onsite support
Committed response time
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
Provides you with rapid remote support and if required an HP authorized representative who
will arrive on site any time and day of the year to begin hardware maintenance service within
4 hours of the service request being logged.
This service provides a trained HP service specialist to perform an installation that meets HP
quality standards, for:
Help improve or maintain system uptime
Convenient onsite support
Committed response time
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
HP Installation and Startup of HP ProLiant Servers
Provides for the installation of your new HP ProLiant server and operating system to assist
you in bringing your new HP ProLiant server and operating system into operation in a timely
and professional manner.
This service provides a trained HP service specialist to perform an installation that meets HP
quality standards, for:
Delivery of the service at a mutually scheduled time convenient to your organization
Availability of an HP service specialist to answer basic questions during the onsite
delivery of this service
Custom installation as detailed in "Delivery specifications" or in a Statement of Work
(SOW)
Verification prior to installation that all service prerequisites are met
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-7572ENN.pdf
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 7
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Service and Support
Optional HP Care Pack Services that will enhance your HP product experience
Optional Services
HP Proactive Select Service
Customer needs on demand access to consulting, technical proactive services and education
courses
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You
can buy Proactive Select Service Credits when you purchase your hardware and then use the
credits over the next 12 months.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN
eSupport
HP eSupport is a portfolio of technology-based services that assist you with managing your
business environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you
need to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access
the support portal, visit: http://www.hp.com/support
HP Insight Remote Support software delivers secure remote support for your HP Servers and
Storage, 24 X 7, so you can spend less time solving problems and more time focused on
your business. You can have your systems remotely monitored for hardware failure using
secure technology that's been proven at thousands of companies around the world. In many
cases, you can avoid problems before they occur.
Customer Technical
Training
In today's cost-conscious business environment, IT professionals, developers, consultants
and users face an interesting challenge: how to keep up with the latest technologies and
expand important skills while delivering profitable results on current projects. To help address
this challenge, HP offers innovative training solutions that help keep you up-to-date on
virtualization, server, storage, Insight Control, Citrix, Microsoft® and open source/Linuxrelated topics-while spending less time away from business-critical activities.
HP Services Awards
HP Technology Services continues to be recognized for service and support excellence by
customers, partners, industry organizations and publications around the world. Recent
honors and award reflect our services team's dedications, technical expertise,
professionalism and uncompromising commitment to customer satisfaction.
Additional Services
Information
To learn more on HP ProLiant servers, HP BladeSystem servers and HP storage products,
please contact your HP sales representative or HP Authorized Channel Partner. Or visit:
www.hp.com/services/proliant or www.hp.com/services/bladesystem or
http://www.hp.com/services/storage
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 8
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Related Options
Service and Support NOTE: HP Care Pack services for the c7000 and c3000 Enclosure cover the
Offerings (HP Care
enclosure, power supplies and fans. HP qualified rack options are covered
Pack Services)
by these services when installed within the same rack. HP supported c-Class
enclosure devices including pass thru, Ethernet interconnect and virtual
connect modules are also covered by the c7000 and c3000 enclosure Care
Pack services.
NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not
covered under the c7000 and c3000 enclosure Care Packs, SAN/Fabric
switches carry separate Care Packs. SAN/Fabric Switch Care Pack service
level support should always be uplifted to match existing storage or server
service level.
Hardware Support Services On-site Service
c7000 HP Care Pack Services
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
NOTE: Uplifts the Ethernet devices to the same level of warranty as the cclass enclosure
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus 24
HP 3 year Support Plus 24 Insight Control Linux Edition BladeSystem c7000
Service
Onsite HW support 24x7, 4hr response and Insight Control Environment for
BladeSystem SW Updates, SW Tech support offsite, onsite at HP's
discretion, 24x7 2hr response time including HP holidays, Electronic
Onsite HW support 24x7, 4hr response and Insight Control Data Center
Edition SW Updates, SW Tech support offsite, onsite at HP's discretion,
24x7 2hr response time including HP holidays, Electronic
Hardware Services On-site Service
c3000 HP Care Pack Services
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years,
Electronic
NOTE: Uplifts the Ethernet devices to the same level of service as the cclass enclosure
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Insight Control Environment for
BladeSystem SW Updates SW Tech support offsite, onsite at HP's
discretion, 24x7 2hr response time including HP holidays, Electronic
Upfront Fixed Installation & Start-up Services
HP BladeSystem c-Class Infrastructure Installation and Startup Service for
Blade Hardware and Insight Control Software, Electronic
HP BladeSystem c7000 Enhanced Network Installation & Start-up Service,
Electronic
HP BladeSystem c3000 Enhanced Network Installation and Startup Service,
Electronic
ProLiant BL c-Class Blade Server Hardware Installation, Electronic
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
UE477E
UE478E
UE479E
UE480E
UH321E
UH322E
UH323E
UH309E
UH310E
UH311E
UH312E
UF540E
UE602E
UE603E
UF814E
UE493E
Page 9
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Related Options
ProLiant BL c-Class Enclosure and Server Blade Hardware Installation,
Electronic
NOTE: For more information, customer/resellers can contact
http://www.hp.com/services/bladesystemservices
UE494E
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 10
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
Shipping Dimensions
Length
Width
Height
Shipping Weight
Product Specifications Performance
Hardware
Connectors and
Cabling
13.88 in (352.55mm)
10.63 in (270.00mm)
4.75 in (120.65mm)
2.0kg (4.4 lbs)
48 Gbps switching fabric
Forwarding rate based on 64-byte packets: up to 36 Mpps
128 MB DDR SDRAM and 32 MB Flash memory
Configurable up to 8192 MAC addresses
Configurable up to 1000 IGMP groups and bridging entries
Configurable maximum transmission unit (MTU) of up to 9018 bytes
(jumbo frames)
Gigabit Ethernet uplink ports (Up to 8 external)
8 external 10/100/1000BASE-T RJ-45 ports. Two of these ports
can be configured to provide an internal crossover connection to
an associated additional Cisco Catalyst Blade Switch 3020
4 external 10/100/1000 SFP or 10/100/1000BASE-T combo ports.
The SFP cage supports Gigabit Ethernet Fiber SX SFP modules
from Cisco Systems.
Management console port:
Indicators
RJ-45-to-DB9 cable for PC connections
Total of 18 LEDs on the face place
12 LEDs for uplink port status
4 Switch status LEDs
2 HP specific LEDs to indicate Health and UID status
Dimensions
Length
10.5in (267.7mm)
Width
7.5 in (92.79mm)
Height
1.1 in (27.94mm)
Weight
1.27kg (2.8 lbs)
Environmental Ranges Temperature Range
Operating Temperature 10 to 35 C (50 to 95 F)
Storage Temperature
-40 to 70 C ( -40 to 158F)
Operating Relative
10 to 85%
Humidity
(non-condensing)
Storage Relative
5 to 95%
Humidity
(non-condensing)
Power Specification
12V @ 5A (60 W)
Product Specifications Security Features
Software
IEEE 802.1x allows dynamic, port-based security, providing server
authentication.
IEEE 802.1x with VLAN assignment allows a dynamic VLAN
assignment for a specific server, regardless of where the server is
connected.
IEEE 802.1x and port security are provided to authenticate the port and
manage network access for all MAC addresses, including those of the
server.
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 11
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
Spanning Tree
Features
Trunking Features
VLAN Features
Quality of Service
Features
IEEE 802.1x with an ACL assignment allows for specific identity-based
security policies, regardless of where the server is connected.
IEEE 802.1x with Guest VLAN allows servers without 802.1x clients to
have limited network access on the Guest VLAN.
Cisco security VLAN ACLs (VACLs) on all VLANs prevent unauthorized
data flows from being bridged within VLANs.
Port-based ACLs (PACLs) allow security policies to be applied on
individual switch ports.
SSH Protocol (v2), Kerberos, and SNMPv3 provide network security by
encrypting administrator traffic during Telnet and SNMP sessions. SSH,
Kerberos, and the cryptographic version of SNMPv3 require a special
cryptographic software image due to U.S. export restrictions.
Secure Sockets Layer (SSL) provides a secure means to use Webbased tools such as HTML-based device managers.
Private VLAN Edge provides security and isolation between switch
ports, helping to ensure that users cannot snoop on other users' traffic.
Bidirectional data support on the Switched Port Analyzer (SPAN) port
allows Cisco Secure Intrusion
IEEE 802.1D Spanning-Tree Protocol support for redundant backbone
connections and loop-free networks simplifies network configuration and
improves fault tolerance.
Per-VLAN Rapid Spanning-Tree (PVRST+) allows rapid spanning-tree
convergence on a per-VLAN spanning-tree basis, without requiring the
implementation of spanning-tree instances.
IEEE 802.1s Multiple Spanning-Tree Protocol (MSTP) allows a
spanning-tree instance per VLAN and enables each VLAN to use a
different uplink allowing better utilization of uplinks.
IEEE 802.1w Rapid Spanning-Tree Protocol (RSTP) provides rapid
spanning-tree convergence independent of spanning-tree timers.
Unidirectional Link Detection (UDLD) and Aggressive UDLD allow
unidirectional links to be detected and disabled to avoid problems such
as spanning-tree loops.
Cisco UplinkFast and BackboneFast technologies help to ensure quick
failover recovery, enhancing overall network stability and reliability.
PVST+ allows for Layer 2 load sharing on redundant links to efficiently
use the extra capacity inherent in a redundant design.
Dynamic Trunking Protocol (DTP) enables dynamic trunk configuration
across all switch ports.
Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast
EtherChannel® groups or Gigabit EtherChannel® groups to link to the
upstream switch/router, or server blades
Link Aggregation Control Protocol (LACP) allows the creation of
Ethernet channeling with upstream switches that conform to IEEE
802.3ad. This feature is similar to Cisco EtherChannel technology and
PAgP.
4096 VLAN IDs are supported.
VLAN1 minimization allows VLAN1 to be disabled on any individual
VLAN trunk link.
VLAN Trunking Protocol (VTP) pruning limits bandwidth consumption on
VTP trunks by flooding broadcast traffic only on trunk links required to
reach the destination devices.
Wire rate performance for highly granular QoS functions. E.g. Granular
rate limiting
Asynchronous data flows upstream and downstream from the end
station or on an uplink are easily managed using ingress policing and
egress shaping.
802.1p CoS and DSCP field classification are provided, using marking
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 12
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
and reclassification on a per-packet basis by source and destination IP
address, source and destination MAC address, or Layer 4 TCP/UDP
port number.
Rate limiting is provided based on source and destination IP address,
source and destination MAC address, Layer 4 TCP/UDP information, or
any combination of these fields, using QoS ACLs (IP ACLs or MAC
ACLs), class maps, and policy maps.
Up to 64 aggregate or individual policers per port are allowed.
Cisco control-plane and data-plane QoS ACLs on all ports help to
ensure proper marking on a per-packet basis.
4 egress queues per port enable differentiated management of up to 4
traffic flows
Shaped Round Robin scheduling helps to ensure differential
prioritization of packet flows by intelligently servicing the egress queues.
Weighted Tail Drop (WTD) provides congestion avoidance at the
ingress and egress queues before a disruption occurs.
Strict priority queuing guarantees that the highest-priority packets are
serviced ahead of all other traffic.
The Cisco Committed Information Rate (CIR) function guarantees
bandwidth in increments as low as 8 Kbps.
Management Features Cisco IOS CLI support provides a common user interface and command
set with all Cisco routers and Cisco Catalyst desktop switches.
Cisco Service Assurance Agent (SAA) support facilitates service-level
management throughout the LAN.
VLAN trunks can be created from any port, using either standardsbased 802.1Q tagging or the Cisco Inter-Switch Link (ISL) VLAN
architecture.
Up to 1005 VLANs per switch and up to 128 spanning-tree instances
per switch are supported.
Cisco VTP supports dynamic VLANs and dynamic trunk configuration
across all switches.
IGMP snooping provides fast client joins and leaves of multicast
streams and limits bandwidth-intensive video traffic to only the
requestors.
Remote Switch Port Analyzer (RSPAN) allows administrators to
remotely monitor ports in a Layer 2 switch network from any other
switch in the same network.
For enhanced traffic management, monitoring, and analysis, the
Embedded Remote Monitoring (RMON) software agent supports 4
RMON groups (history, statistics, alarms, and events).
Layer 2 traceroute eases troubleshooting by identifying the physical
path that a packet takes from source to destination.
All 4 RMON groups are supported through a SPAN port, which permits
traffic monitoring of a single port, a group of ports from a single network
analyzer, or RMON probe.
The Domain Name System (DNS) provides IP address resolution with
user-defined device names.
Trivial File Transfer Protocol (TFTP) reduces the cost of administering
software upgrades by downloading from a centralized location.
Network Time Protocol (NTP) provides an accurate and consistent
timestamp to all intranet switches.
Multifunction LEDs per port for port status; and switch-level status LEDs
for system.
CiscoWorks Features CiscoWorks network-management software provides management
capabilities on a per-port and per-switch basis, providing a common
management interface for Cisco routers, switches, and hubs.
SNMP v1, v2c, and v3 and Telnet interface support deliver
comprehensive in-band management, and a CLI-based management
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 13
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
console provides detailed out-of-band management.
Cisco Discovery Protocol versions 1 and 2 enable a CiscoWorks
network-management station for automatic switch discovery.
Management and
Standards Support
Management
BRIDGE-MIB (RFC1493)
Information Base (MIB) CISCO-CDP-MIB
Support
CISCO-CLUSTER-MIB
CISCO-CONFIG-MAN-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
CISCO-ENVMON-MIB
CISCO-FLASH-MIB
CISCO-FTP-CLIENT-MIB
CISCO-IGMP-FILTER-MIB
CISCO-IMAGE-MIB
CISCO IP-STAT-MIB
CISCO-MAC-NOTIFICATION-MIB
CISCO-MEMORY-POOL-MIB
CISCO-PAGP-MIB
CISCO-PING-MIB
CISCO-PROCESS-MIB
CISCO-RTTMON-MIB
CISCO-STP-EXTENSIONS-MIB
CISCO-SYSLOG-MIB
CISCO-TCP-MIB
CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
CISCO-VLAN-MEMBERSHIP-MIB
CISCO-VTP-MIB
ENTITY-MIB
ETHERLIKE-MIB
IF-MIB (in and out counters for VLANs are not supported)
IGMP-MIB
OLD-CISCO-CHASSIS-MIB
OLD-CISCO-FLASH-MIB
OLD-CISCO-INTERFACES-MIB
OLD-CISCO-IP-MIB
OLD-CISCO-SYS-MIB
OLD-CISCO-TCP-MIB
OLD-CISCO-TS-MIB
RFC1213-MIB (per the agent capabilities specified in the CISCORFC1213-CAPABILITY.my)
RFC1253-MIB
RMON-MIB
RMON2-MIB
SNMP-FRAMEWORK-MIB
SNMP-MPD-MIB
SNMP-NOTIFICATION-MIB
SNMP-TARGET-MIB
SNMPv2-MIB
TCP-MIB
UDP-MIB
Standards
IEEE 802.1s
IEEE 802.1w
IEEE 802.1x
IEEE 802.3ad
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T
ports
IEEE 802.1D Spanning-Tree Protocol
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 14
QuickSpecs
Cisco Catalyst 3020 Blade Switch for HP c-Class
BladeSystem
Technical Specifications
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification
1000BASE-SX
RMON I and II standards
Safety and
Compliance
Safety Certifications
UL/CUL Recognition to UL/CSA 60950-1
TUV to EN 60950-1
CB report and certificate to IEC 60950-1 with all country deviations
CE Marking
Electromagnetic
FCC Part 15 Class A
Emissions
EN 55022 Class A (CISPR22 Class A)
Certifications FCC Part
VCCI Class A
15 Class A
AS/NZS 3548 Class A or AS/NZS CISPR22 Class A
MIC Class A
CE Marking
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Cisco, CiscoWorks, and Cisco Catalyst are US registered trademarks of Cisco Systems Corporation.
Windows is a US registered trademark of Microsoft Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 12515 Worldwide QuickSpecs — Version 16 — 4.18.2014
Page 15