lancom gs-1224 - LANCOM Systems GmbH

LANCOM GS-1224
Web-smart switch with SNMP and power-save functions
1 24-port layer-2 switch with four combo ports (TP/SFP)
1 Port-based QoS, 802.1p or TOS/DiffServ
1 802.1X authentication on all ports
1 Monitoring via SNMP and LANmonitor
1 VLAN support
1 Fanless design
1 Low power consumption and automatic port deactivation
Managed switches exceed the requirements of many networks, which often makes them just too expensive. Web-smart switches present a good alternative where
console-based configuration is not a requirement. The LANCOM GS-1224 is setting new standards for Web-smart switches: This new switch offers the usual security features
such as 802.1X authentication on all ports, and it allows for monitoring via SNMP and LANmonitor. It also features effective power-save functions. These include the
adaptation of power requirements to the cable length, and automatic deactivation of unused ports. The fanless design of this switch has two main advantages: It is an
energy saver and it makes the switch so quiet that it can be employed unobtrusively in offices and on business premises.
More Efficiency.
The LANCOM GS-1224 can re-route data packets when network glitches occur. The rapid spanning tree algorithm is so fast at this that users do not notice any delay. Just
as important as the rapid spanning tree algorithm is the efficient control of bandwidth. This ensures that important applications such as IP telephony are constantly provided
with ample bandwidth to avoid interruptions to conversations. The winners are your budget and the environment: The LANCOM GS-1224 makes do with a power consumption
of just 20 W, about one-third less than other conventional switches on the market. And yet the LANCOM GS-1224 can do more: It adapts its power consumption to the
length of the network cables. With shorter network cabling, power consumption is reduced. The only power consumed is that which is actually required for data transfer.
The LANCOM GS-1224 switches off unused ports automatically.
More Security.
The LANCOM GS-1224 gives you the assurance that rogue clients cannot access your network via this switch. Configuring 802.1X access control for all ports ensures that
unauthorized devices plugged into a switch port cannot gain access to the network. Rest assured that all your network components are compatible: LANCOM switches
are the perfect link between LANCOM routers and LANCOM access points. In order for the wireless virtual networks (VLANs) supported by our access points to match-up
seamlessly to an external, cabled IPsec-based VPN, the switches at the junctions must be able to recognize the different VLANs and forward the data accordingly. The
LANCOM GS-1224 can do this, allowing you to benefit from convergent, professional network technology from a single source.
More Management.
The LANCOM GS-1224 stands for easy operability without compromising on security. Managing the switch is easy with the clearly structured, user-friendly WEBconfig.
Port mirroring allows the close observation of network traffic. And there's yet more you can do: With the free LANCOM Management Tools including LANconfig and
LANmonitor, we offer not only direct access to the devices via WEBconfig but also the direct observation of the GS-1224's performance in the network.
More advantages
Excellence in technology combined with outstanding energy efficiency and environmental protection are backed up by the superb LANCOM Service. LANCOM exceeds
legal warranty requirements to offer a five-year warranty on the LANCOM GS-1224. All of this comes to you with an optimal price/performance ratio.
LANCOM GS-1224
Quality of Service
DiffServ/TOS
Port based (VIP Port), 802.1p, Priority queuing of packets based on DiffServ/TOS fields
Port priority
Supports four level priority queues to prioritize inbound and outbound traffic
Security
802.1X
802.1X access control on all ports, user-based
Storm Control
Multicast/Broadcast/Unicast storm suppression
Performance
Switching technology
Store and forward with latency less than 4 microseconds
MAC addresses
Support of max 32K MAC addresses
MAC addresses
Support of max 8K MAC addresses
Throughput
Max. 48 Gbps on the backplane
VLAN
Port based and IEEE 802.1q tag based VLAN with up to 4,096 VLAN and up to 24 active VLANs
Jumbo Frame Support
Jumbo frame support with up to 9k frames
LAN protocols
Link Aggregation Control Protocol (LACP)
Maximum of 8 groups, max 12 member per group
Multicasting
Supports IGMP snooping
Spanning Tree Protokoll (STP) / Rapid STP
802.1d/1w
Interfaces
Ethernet ports
20 TP ports 10/100/1000 Mbps and 4 Combo ports TP/SFP 10/100/1000 Mbps, Deactivation of unused Ports and providing of power dependend
upon the cable length (energy saving)
Management
Port Mirroring
Support 1:N port mirroring
LANconfig
Supported by LANconfig (LANCOM management software): automatic detection, display of device properties, opening of web configuration
LANmonitor
Monitoring application for Microsoft Windows for (remote) surveillance and logging of the device and port status
Security
Acces security via changeable password
SNMP
SNMP management via SNMPv1 or v2c and private MIB
RFC 1213 MIB
supported
RFC 1493 Bridge MIB
supported
RFC 2863 Interface Group MIB
supported
WEBconfig
Integrated web server with setup wizard for the configuration via Internet browsers with HTTP
LANmonitor
Monitoring application for Microsoft Windows for (remote) surveillance and logging of the device and port status
Firmware update
Upload of firmware via HTTP
Hardware
Power supply
Internal power supply unit (110–230 V, 50-60 Hz)
Environment
Temperature range 0–40° C; humidity 10–90%; non-condensing
Housing
Robust metal housing, 19' 1U (440 x 44 x 170 mm) with removable mounting brackets, network connectors on the front
Fans
None; fanless design without rotating parts, high MTBF
Power consumption (max)
20 Watt
Declarations of conformity
CE
EN 55022, EN 55024, EN 60950
FCC
FCC Part 15 (CFR47) Class A
Supported IEEE standards
IEEE 802.1AB
Link Layer Discovery Protocol (LLDP)
LANCOM GS-1224
IEEE 802.1AB
LLDP-MED
IEEE 802.1d
MAC Bridging
IEEE 802.1d
Spanning Tree
IEEE 802.1p
Class of Service
IEEE 802.1q
VLAN
IEEE 802.1s
Multiple Spanning Tree Protocol (MSTP)
IEEE 802.1w
Rapid Spanning Tree Protocoll (RSTP)
IEEE 802.1X
Port Based Network Access Control
IEEE 802.3
10Base-T Ethernet
IEEE 802.3ab
1000Base-TX Ethernet
IEEE 802.3ad
Link Aggregation Control Protocol (LACP)
IEEE 802.3af
Power over Ethernet (PoE)
IEEE 802.3at
Power over Ethernet Plus (PoE+)
IEEE 802.3az
Energy Efficient Ethernet
IEEE 802.3u
100Base-T Ethernet
IEEE 802.3x
Flow Control
IEEE 802.3z
1000Base-X Ethernet
Package content
Manual
Printed Installation Guide (DE/EN)
CD/DVD
Data medium with firmware, management software (LANconfig, LANmonitor, WLANmonitor) and documentation
Cable
IEC power cord
19" brackets
Two 19' brackets for rackmounting
Support
Warranty
5 years, support via Hotline and Internet KnowledgeBase
Options
Advance Replacement
LANCOM Next Business Day Service Extension CPE, item no. 61411
Accessories
1000Base-SX SFP module
LANCOM SFP-SX-LC1, item no. 61556
1000Base-LX SFP module
LANCOM SFP-LX-LC1, item no. 61557
Item numbers
LANCOM GS-1224
61459 (EU) 61460 (UK)
LANCOM GS-1224P
61461(EU) 61460 (UK)
www.lancom.eu
LANCOM Systems GmbH I Adenauerstr. 20/B2 I 52146 Wuerselen I Germany I E-Mail info@lancom.eu I Internet www.lancom.eu
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change
without notice. No liability for technical errors and/or omissions. 11/2012
Supported IEEE standards