Quick Setup Guide
MFC-230C
MFC-265C
Before you can use the machine, you must set up the hardware and install the software.
Please read this Quick Setup Guide for the correct setup procedure and installation instructions.
STEP 1
Setting Up the Machine
STEP 2
Installing the Driver & Software
Setup is Complete!
Keep this Quick Setup Guide, the User’s Guide and the supplied CD-ROM in a convenient place for
quick and easy reference at all times.
1
Symbols used in this guide
Warning
Warnings tell you what to do to prevent
possible personal injury.
Note
Notes tell you how you should respond
to a situation that may arise or give tips
about how the current operation works
with other features.
Caution
Improper Setup
Cautions specify procedures you must Improper Setup icons alert you to
follow or avoid to prevent possible
devices and operations that are not
damage to the machine or other objects. compatible with the machine.
User’s Guide or Software User’s Guide
Indicates reference to the User’s Guide
or Software User’s Guide which is on
the CD-ROM we have supplied.
Table of Contents
Getting Started
Carton components...................................................................................................................................... 2
Control panel................................................................................................................................................ 3
STEP 1 – Setting Up the Machine
Removing the protective parts ..................................................................................................................... 4
Loading paper .............................................................................................................................................. 4
Connecting the power cord and telephone line............................................................................................ 6
Installing the ink cartridges........................................................................................................................... 7
Print quality check ...................................................................................................................................... 10
Setting the LCD contrast ............................................................................................................................ 11
Setting the date and time ........................................................................................................................... 11
Setting your station ID................................................................................................................................ 12
Setting tone or pulse dialling mode ............................................................................................................ 12
Choosing a Receive Mode ......................................................................................................................... 13
STEP 2 – Installing the Driver & Software
Windows®
For USB Interface Users
(For Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista™)................................. 16
Installing FaceFilter Studio................................................................................................................... 19
Windows®
For USB Interface Users
(For Mac OS® X 10.2.4 or greater) ................................................................................................................ 20
Consumables
Replacement consumables........................................................................................................................ 22
Ink cartridge .......................................................................................................................................... 22
1
Getting Started
1
1
Carton components
Carton components may vary from one country to another.
Save all packing materials and the carton in case for any reason you must ship your machine.
User’s Guide
Quick Setup Guide
CD-ROM
USB Interface Cable
Telephone Line Cord
Black (LC960BK)
Yellow (LC960Y)
Cyan (LC960C)
Ink Cartridges
A USB interface cable is a standard accessory.
Please make sure you use a USB 2.0 cable that is no longer than 2 metres.
Your machine has a USB interface that is compatible with the USB 2.0 specification.
DO NOT connect the interface cable at this time.
Connecting the interface cable is done during the software installation process.
2
Power Cord
Magenta (LC960M)
Getting Started
2
Control panel
01/01 13:00 Fax
1
Fax and telephone keys
7
Stop/Exit key
2
Dial Pad
8
Menu keys
3
Mode keys
9
Copy Options key
4
Fax Resolution key
10 LCD (Liquid Crystal Display)
5
Ink Management key
11 Power Save key
6
Start keys
For the details of the control panel, see Control panel overview in Chapter 1 of the User’s Guide.
Note
01/01 13:00 Fax
1
2
3
Date
Time
Receive mode
When the machine is idle (not being used) it will return to the default display shown above. The default display
shows the date, time, and the current receive mode.
Illustrations in this Quick Setup Guide are based on MFC-265C.
3
STEP 1
Setting Up the Machine
1
1
1
2
Removing the protective
parts
2
Loading paper
You can load up to 100 sheets of 80 g/m2
paper.
For details, see Acceptable paper and other
media in Chapter 2 of the User’s Guide.
Remove the protective tape and film covering
the scanner glass.
Remove the foam bag (1) containing the ink
cartridges from on top of the paper tray.
1
Pull the paper tray completely out of the
machine and lift the output paper tray cover (1).
1
Improper Setup
1
DO NOT connect the USB cable. Connecting
the USB cable is done during the software
installation process.
2
Press and slide the paper side guides (1) and
paper length guide (2) to fit the paper size.
1
2
4
Setting Up the Machine
3
4
Fan the stack of paper well to avoid paper jams
and misfeeds.
5
Gently adjust the paper side guides with both
hands to fit the paper.
Make sure that the paper guides touch the
edges of the paper.
Gently put the paper into the paper tray print
side down and top edge first.
Check that the paper is flat in the tray.
Note
Be careful that you do not push the paper in too
far; it may lift at the back of the tray and cause
paper feed problems.
6
Note
Close the output paper tray cover (1).
When you use Legal size paper, press and hold
the universal guide release button (1) as you slide
out the front of the paper tray.
7
Slowly push the paper tray completely into the
machine.
1
5
STEP 1
8
Setting Up the Machine
While holding the paper tray in place, pull out
the paper support
until it clicks, and then
unfold the paper support flap .
Improper Setup
DO NOT connect the USB cable. Connecting
the USB cable is done during the software
installation process.
Warning
Note
Do not use the paper support flap
paper.
for Legal size
Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
Note
3
1
Connecting the power cord
and telephone line
If you are sharing one telephone line with an
external telephone, connect it as shown below.
1
Connect the power cord.
2
LINE
EXT.
Warning
The machine must be fitted with an earthed plug.
2
6
Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a modular wall socket.
1
Extension telephone
2
External telephone
Setting Up the Machine
Note
4
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
Installing the ink cartridges
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
No Cartridge
LINE
EXT.
Set the receive mode to ‘External TAD’ if
you have an external answering machine.
For more details, see Connecting an external
TAD (telephone answering device) in
Chapter 7 of the User’s Guide.
2
Open the ink cartridge cover (1).
1
3
Pull all the lock release levers down and
remove the yellow protective part (1).
1
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.
7
STEP 1
4
Setting Up the Machine
Take out the ink cartridge.
6
Install each ink cartridge in the direction of the
arrow on the label.
Take care to match the colour of the lock
release lever (1) with the cartridge colour (2),
as shown in the diagram below.
2
5
Carefully remove the protective yellow cap (1).
1
1
M
7
brother
Lift each lock release lever and gently push it
until it clicks, and then close the ink cartridge
cover.
Improper Setup
DO NOT touch the area shown in the
illustration below.
Note
Note
If the protective yellow cap comes off when you
open the bag, the cartridge will not be damaged.
8
If the LCD shows Install Black,
Install Yellow, Install Cyan or
Install Magenta after you install the ink
cartridges, check that the ink cartridges are
installed correctly.
Setting Up the Machine
The machine will clean the ink tube system for
use for the first time. The cleaning process will
last approximately four minutes.
The LCD shows:
Preparing System
q
Approx 4 Minutes
Cleaning
q
Please Wait
Caution
• DO NOT take out ink cartridges if you do not need
to replace them. If you do so, it may reduce the ink
quantity and the machine will not know the
quantity of ink left in the cartridge.
• DO NOT shake the ink cartridges. If ink stains your
skin or clothing, wash with soap or detergent at
once.
• DO NOT repeatedly insert and remove the
cartridges. If you do so, ink may seep out of the
cartridge.
• If you mix the colours by installing an ink cartridge
in the wrong position, clean the print head several
times after correcting the cartridge installation.
(See Cleaning the print head in Appendixes B of
the User’s Guide.)
• Once you open an ink cartridge, install it in the
machine and use it up within six months of
installation. Use unopened ink cartridges by the
expiration date written on the cartridge package.
• DO NOT dismantle or tamper with the ink
cartridge, this can cause the ink to leak out of the
cartridge.
• Brother multifunction machines are designed to
work with ink of a particular specification and will
work to a level of optimum performance when
used with genuine Brother branded ink cartridges.
Brother cannot guarantee this optimum
performance if ink or ink cartridges of other
specifications are used. Brother does not
therefore recommend the use of cartridges other
than genuine Brother branded cartridges with this
machine or the refilling of empty cartridges with ink
from other sources. If damage is caused to the
print head or other parts of this machine as a result
of using incompatible products with this machine,
any repairs required as a result may not be
covered by the warranty.
9
STEP 1
5
1
Setting Up the Machine
Print quality check
4
Is Quality OK?
q
After the cleaning cycle is finished, the LCD
shows:
1.Yes 2.No
Set Paper and
If all lines are clear and visible, press
1 (Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press
2 (No) on the dial pad and go to step 5.
q
Press Start
2
3
Make sure A4, Letter or Legal size paper is
loaded in the paper tray.
Press Colour Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
The LCD shows:
OK
5
Check the quality of the four colour blocks on
the sheet.
(black/ yellow/ cyan/ magenta)
Poor
The LCD asks you if the print quality is OK for
black and colour. Press 1 (Yes) or 2 (No) on the
dial pad.
Black OK?
q
1.Yes 2.No
Color OK?
q
1.Yes 2.No
After pressing 1 (Yes) or 2 (No) for both black
and colour, the LCD shows:
Start Cleaning?
Note
Avoid touching the printed surface of the paper
immediately after printing, the surface may not be
completely dry and may stain your fingers.
q
1.Yes 2.No
6
7
10
Press 1 (Yes), the machine will then start
cleaning the colours.
After cleaning is finished, press Colour Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
Setting Up the Machine
6
Setting the LCD contrast
You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty seeing
the LCD from your position, we recommend changing
the contrast setting for improved viewing.
1
2
3
4
Press Menu.
Press 1.
Press 6.
Press a or b to choose Dark or Light.
7
Setting the date and time
The machine displays the date and time, and if you
set up the station ID, the date and time displayed on
your machine will be printed on every fax you send.
1
2
3
4
Contrast:Dark
Press Menu.
Press 0.
Press 2.
Enter the last two digits of the year on the dial
pad, and then press OK.
Year:2007
(e.g. Enter 0 7 for 2007.)
5
Enter the two digits for the month on the dial
pad, and then press OK.
Month:03
(e.g. Enter 0 3 for March.)
6
Enter the two digits for the day on the dial pad,
and then press OK.
Day:01
Contrast:Light
(e.g. Enter 0 1 for the first day of the month.)
7
Enter the time in 24-hour format on the dial
pad, and then press OK.
Time:15:25
(e.g. Enter 1 5, 2 5 for 15:25.)
5
6
Press OK.
8
Press Stop/Exit.
Press Stop/Exit.
11
STEP 1
8
Setting Up the Machine
Setting your station ID
9
You should store your name and fax number to be
added to all fax pages that you send.
1
2
3
4
Press Menu.
Press 0.
Press 3.
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK. To enter a “+” for
international codes, press l. For example, to
enter the China dialling code “+86 ”, press l, 8, 6
and then the rest of your number.
Fax:+86XXXXXXXX
5
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Name:_
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the same
key as the last character, press
to move the
cursor to the right.
• If you entered a letter incorrectly and want to
change it, press
or
to move the cursor to
the incorrect character, press Clear/Back.
Press
key
One
time
Two
times
Three
times
Four
times
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
6
5
J
K
L
5
6
M
N
O
6
7
P
Q
R
S
8
T
U
V
8
9
W
X
Y
Z
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go to back to step 1.
For details, see Entering Text in
Appendixes C of the User's Guide.
12
Setting tone or pulse dialling
mode
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling service (rotary), you need to
change the dialling mode.
1
2
3
4
5
Press Menu.
Press 0.
Press 4.
Press a or b to choose Pulse (or Tone).
Press OK.
Press Stop/Exit.
Setting Up the Machine
10 Choosing a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
Now go to
Supplied CD-ROM ‘MFL-Pro Suite’ on the next
page to install the drivers.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Yes
No
Are you using the voice message
function of an external telephone
answering device?
No
Do you want the machine to
answer fax and telephone calls
automatically?
Fax Only
Your machine
automatically answers
every call as a fax.
Yes
Fax/Tel
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the telephone
will ring for you to pick
up the call.
No
Yes
Manual
You control the
telephone line and must
answer every call
yourself.
External TAD
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
printed.
1
2
3
4
5
Press Menu.
Press 0.
Press 1.
Press a or b to choose the mode.
Press OK.
Press Stop/Exit.
For details, see Using receive modes in
Chapter 6 of the User’s Guide.
13
Supplied CD-ROM ‘MFL-Pro Suite’
1
1
Supplied CD-ROM ‘MFL-Pro Suite’
Windows®
Macintosh®
Install MFL-Pro Suite
You can install the MFL-Pro Suite software and
multifunction drivers.
Start Here OSX
You can install the MFL-Pro Suite that includes the
printer driver, scanner driver and Brother
ControlCenter2 for Mac OS® X 10.2.4 or greater.
Install Other Drivers or Utilities
You can install additional MFL-Pro Suite software
utilities, install without Presto!® PageManager® or
install FaceFilter Studio.
Documentation
View the Software User’s Guide in HTML format. You
can also view the manuals in PDF format by
accessing the Brother Solutions Center. The
Software User’s Guide includes instructions for
features available when connected to a computer.
(eg. Printing and scanning details)
Brother Solutions Center
Access the Brother Solutions Center for FAQs, User’s
Guides, driver updates and tips for using your
machine. (Internet access required)
Supplies Information
View our web site for original/genuine Brother
supplies at http://www.brother.com/original/ .
Repair MFL-Pro Suite
If an error occurred during the installation of the
MFL-Pro Suite, use this selection to automatically
repair and re-install the MFL-Pro Suite.
Note
MFL-Pro Suite includes the Printer Driver,
Scanner Driver and Brother ControlCenter3.
14
Documentation
View the Software User’s Guide in HTML format. You
can also view the manuals in PDF format by
accessing the Brother Solutions Center. The
Software User’s Guide includes instructions for
features available when connected to a computer.
(eg. Printing and scanning details)
Brother Solutions Center
Access the Brother Solutions Center for FAQs, User’s
Guides, driver updates and tips for using your
machine. (Internet access required)
Utilities
You can find the additional Utilities from this folder.
STEP 2
Installing the Driver & Software
Follow the instructions on this page for your operating system and interface.
For the latest drivers, documentation, and to find the best solution for your problem, access the Brother Solution Center
directly from the CD-ROM / Driver or visit http://solutions.brother.com.
Windows®
For USB Interface Users
(For Windows® 2000 Professional/XP/
XP Professional x64 Edition/Windows Vista™) ........................................................... 16
Macintosh®
For USB Interface Users
(For Mac OS® X 10.2.4 or greater) ................................................................................. 20
The screens for Windows® in this Quick Setup Guide are based on Windows® XP.
The screens for Mac OS® X in this Quick Setup Guide are based on Mac OS® X 10.4.
Screens on your computer may vary depending on your operating system.
15
STEP 2
Installing the Driver & Software
Windows®
1
Windows®
USB
1
For USB Interface Users
(For Windows® 2000 Professional/XP/
XP Professional x64 Edition/Windows Vista™)
Important
4
The CD-ROM main menu will appear. Click
Install MFL-Pro Suite.
Make sure that you have finished the
instructions from STEP 1 Setting Up the
Machine on pages 4 through 13.
Note
• Please close any applications running before
installing MFL-Pro Suite.
• Make sure there are no memory cards or a USB
Flash memory drive inserted into the media drives
or USB direct interface at the front of the machine.
1
2
3
Disconnect the machine from the power socket
and from your computer, if you already
connected an interface cable.
Turn on your computer.
You must be logged on with Administrator
rights.
If this window does not appear, use Windows®
Explorer to run the start.exe program from the
root folder of the Brother CD-ROM.
Note
• If you are using Windows® 2000 Professional
and have not installed service pack 3 (SP3) or
greater:
To access the PhotoCapture Center™ features
from your computer you may have to install a
Windows® 2000 update first.
The Windows® 2000 update is included with the
MFL-Pro Suite installer.
To install the update, follow the steps below:
1 Click OK to start installation of the Windows®
updates.
Put the supplied CD-ROM into your CD-ROM
drive. If the model name screen appears,
choose your machine. If the language screen
appears, choose your language.
2 When instructed, click OK to restart your
computer.
3 After the computer restarts, the installation of
MFL-Pro Suite will automatically continue.
• If the installation does not continue automatically,
open the main menu again by ejecting and then
reinserting the CD-ROM disc or double-click the
start.exe program from the root folder, and
continue from step 4 to install MFL-Pro Suite.
16
Installing the Driver & Software
• For Windows Vista™, when the User Account
Control screen appears, click Allow.
Windows®
5
6
7
After reading and accepting the
Presto!® PageManager® License Agreement,
click Yes.
9
Windows®
USB
Note
For Windows Vista™, when this screen appears,
click the check box and click Install to complete
the installation properly.
When this screen appears, go to the next step.
10 Using both hands, use the plastic tabs on both
The installation of the Presto!® PageManager®
will automatically start and is followed by the
installation of MFL-Pro Suite.
sides of the machine to lift the scanner cover
until it locks securely into the open position.
When the Brother MFL-Pro Suite Software
License Agreement window appears, click Yes
if you agree to the Software License
Agreement.
11 Connect the USB cable to the USB socket
marked with a
symbol. You will find the
USB socket inside the machine as shown
below.
8
Choose Standard, and then click Next. The
installation continues.
17
STEP 2
Installing the Driver & Software
12 Carefully guide the USB cable into the trench
Windows®
USB
as shown below, following the trench around
and toward the back of the machine.
Then, connect the cable to your computer.
Windows®
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
15 When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
• Make sure you use a USB 2.0 cable that is no
longer than 2 metres.
16 Click Finish to restart your computer.
After restarting the computer, you must be
logged on with Administrator rights.
13 Lift the scanner cover to release the lock
.
Gently push the scanner cover support down
and close the scanner cover .
Note
14 Turn on the machine by connecting the power
cord.
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQ’s in
Start/All Programs/Brother/MFC-XXXX.
The MFL-Pro Suite has been installed
completely. Proceed to Installing
FaceFilter Studio on page 19 to install the
FaceFilter Studio application.
Note
MFL-Pro Suite includes the Printer Driver,
Scanner Driver and Brother ControlCenter3.
18
Installing the Driver & Software
Windows®
FaceFilter Studio is an easy-to-use borderless photo
printing application. FaceFilter Studio also lets you
edit your photo data and add photo effects such as
red eye reduction or skin tone enhancement.
Important
Windows®
USB
Installing FaceFilter Studio
Before you launch FaceFilter Studio for the
first time, you must confirm MFL-Pro Suite is
installed, your Brother machine is turned ON
and connected to your computer.
17 Open the main menu again by ejecting and
then reinserting the CD-ROM disc or by
double-clicking the start.exe program from the
root folder.
18 The CD-ROM main menu will appear. Click
Install Other Drivers or Utilities.
19 Click the FaceFilter Studio button to install.
20 For information on basic FaceFilter Studio
functions see Using FaceFilter Studio for photo
printing by REALLUSION in the Software
User’s Guide on the CD-ROM.
For more detailed information, See FaceFilter
Studio Help.
19
STEP 2
2
Installing the Driver & Software
For USB Interface Users
(For Mac OS® X 10.2.4 or greater)
Important
3
Make sure that you have finished the
instructions from STEP 1 Setting Up the
Machine on pages 4 through 13.
Macintosh®
USB
Macintosh®
Carefully guide the USB cable into the trench
as shown below, following the trench around
and toward the back of the machine. Then,
connect the cable to your Macintosh®.
Note
• For Mac OS® X 10.2.0 to 10.2.3 users, upgrade to
Mac OS® X 10.2.4 or greater. (For the latest
information for Mac OS® X, visit
http://solutions.brother.com)
• Make sure there are no memory cards or a USB
Flash memory drive inserted into the media drives
or USB direct interface at the front of the machine.
1
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your Macintosh®.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
• Make sure you use a USB 2.0 cable that is no
longer than 2 metres.
2
4
Connect the USB cable to the USB socket
marked with a
symbol. You will find the
USB socket inside the machine as shown
below.
Lift the scanner cover to release the lock .
Gently push the scanner cover support down
and close the scanner cover .
Note
Make sure that the machine is turned on by
connecting the power cord.
20
Installing the Driver & Software
Turn on your Macintosh®.
10 For Mac OS® X 10.2.4 to 10.2.8 users:
Click Add.
Put the supplied CD-ROM into your CD-ROM
drive.
11 Choose USB.
7
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Macintosh®
USB
5
6
Macintosh®
12 Choose MFC-XXXX (where XXXX is your
model name), and then click Add.
Note
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
8
9
The Brother software will search for the Brother
device. During this time the following screen
will appear.
13 Click Print Center, then Quit Print Center.
When this screen appears, click OK.
For Mac OS® X 10.3.x or greater users:
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
The MFL-Pro Suite, Brother printer driver,
scanner driver and Brother
ControlCenter2 have been installed and
the installation is now complete.
21
Consumables
1
1
Replacement consumables
When the time comes to replace ink cartridges, an error message will be indicated on the LCD. For more
information about the ink cartridges for your machine, visit http://solutions.brother.com or contact your local
Brother re-seller.
Ink cartridge
Black
Yellow
Cyan
Magenta
LC960BK
LC960Y
LC960C
LC960M
What is Innobella™?
Innobella™ is a range of genuine consumables offered by Brother.
The name "Innobella™" derives from the words "Innovation" and "Bella"
(meaning "Beautiful" in Italian) and is a representation of the "innovative"
technology providing you with beautiful and long lasting print results.
22
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Multi-Function Link is a registered trademark of Brother International Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and /or other countries.
Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and /or other
countries.
Macintosh and TrueType are registered trademarks of Apple Inc.
Presto! PageManager is a registered trademark of NewSoft Technology Corporation.
PictBridge is a trademark.
FaceFilter Studio is a trademark of Reallusion, Inc.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary
programs.
All other brand and product names mentioned in this manual are trademarks or registered trademarks of their
respective companies.
Compilation and Publication
Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product
descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be
responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited
to typographical and other errors relating to the publication.
Copyright and License
©2007 Brother Industries, Ltd.
CHN-ENG