Digital Terrestrial Receiver Digital Terrestrial Receiver

AGENT:
User's manual
Digital Terrestrial Receiver
1TINSE104---001
PRINTED IN CHINA
Contents
SPECIFICATION
Frequency Range
VHF:170MHz~230MHz
UHF:470MHz~862MHz
RF input level
-20dBm~-78dBm
Contents
Safety instruction
1-2
3
Main Features
1.Front and rear panel
5-6
7-8
ANT input impedance
75
Band width
6/7/8MHz
2.Remote Control Unit(RCU)
Demodulation
COFDM
3.BASIC FUNCTIONS
Transport
Stream MPGE- ISO/I EC 13818
Video output
VIDEO 1+0.3Vp-p 75
Audio output
1Vp-p adjustable
Video input
1+0.2Vp-p 75
Audiio input
1+0.2Vp-p 47K
Video formats
720 X 480(NTSC) 72 0 X 576(PAL)pixels
Audio formats
MPEG layer 1& ,32/44.1/48KHz
Upgrade/USB
USB 2.0 supports
the play of JPEG/ MP3 / M P4 (AVI/ MPG/
DAT/ VOB) and s oftware upgrade
Power input
+12V~24V
Power consumption
4.5W MAX.
Weight
0.25KG(APP.)
Operation temperature
-10 C~+50 C
Storage temperature
-40 C~+65 C
44
3.1 Enter into system and power on-off
3.2 Volume adjustment and Mute
3.3 TV/RADIO Programs switch
3.4 Station switch
3.5 Display information of programs
3.6 Program return
3.7 Audio language switch and L/R channel
3.8 Electronic programs guide(EPG)
3.9 Teletext
3.10 Subtitle
4 DIGITAL TV
4
9
9
9-10
10
10
10
10
10-11
11-13
13-14
14
14
4.1 INSTALLATION
4.1.1 Area Search
4.1.2 Manual Search
4.1.3 Auto Search
4.2 CHANNEL MANAGER
4.2.1 Channel Organizer
4.2.2 Channel Storing
4.2.3 Channel Grouping
4.2.4 Edit Channel
4.2.5 Delete
4.3 CONFIGURATION
4.3.1 OSD
4.3.2 TV
4.3.2.1 Display Mode
4.3.2.2 Aspect Ratio
4.3.2.3 Video Output
14-15
15
15-16
17
17
18-19
20-21
21-22
22-24
24
25
25-27
27
27
27
28
1
Contents
TROUBLE SHOOTING
4.3.2.4 Brightness
4.3.2.5 Contrast
4.3.2.6 HUE
4.3.2.7 Saturation
4.3.3 System Set up
4.3.3.1 EQ Setup
4.3.3.2 Surround
4.3.3.3 Active Antenna
4.3.3.5 LCN
4.3.3.6 Area
4.3.4 Time
4.3.5 Wake up Timer
4.3.6 Parental Lock
4.4 SOFTWARE UPGRADE
4.4.1 Download update BIN file from USB
4.5 FACTORY DEFAULT
4.6 VERSION
5 USB MEDIA PLAY
28-29
29
29
29-30
30-31
31
31
Problem
No power and
LED off
31
31
32-33
33-35
35
35
35-36
36
36
37
38-39
39-40
6 GAMES
41
6.1 Box Man
6.2 Tetris
6.3 Hit Rat
41
42
42
TROUBLE SHOOTING
43
SPECIFICATION
44
2
AC/DC adaptor
disconnected
Solution
Connec t the pl ug of AC /DC
adap tor to power input jack
31
No sound or picture In st and_ by mode
but LED is on
No sound or picture No si gnal or si gnal
too weak
Pr ess power key on rem ot e
to tur n on
Check ant enna or cab le
con nec tion
Si gnal is too st rong
AD D an at tenua tor
Si gnal is too weak
Re- inst al l ant enna or move
ant enna
Miss wi ring /TV is not
Connec t AV cab le,
swi tch TV to AV mode
Pi ct ur e NG
36
5.1 USB Movie
5.2 USB Music
5.3 USB Dhoto
Possible Causes
on AV mode
No pi ct ur e
Remote control
does not operate
Above is OK
Send for repai r
Bat ter y exh aus ted
Repl ace bat ter y
Som et hi ng shi el d the
R/ C si gnal
in front
43
Keep the R/ C wi ndow cl ear
6 .2 Tetris
Play: press “menu” under normal playing mode and select
Safety instruction
GAME→Native Games→Teris step to play the game.
1.There are five function selection menu on the left of the interface
Please read the following instructions carefully
for user: Start Game: Setting: Set game speed and difficulty.
2.After game-setting,move cursor to“start game”parameter,press
1. The power input is DC9V+/-10%.
2.Do not overload a wall outlet, extension cord, or adaptor as
“Ok” key enter into the game:
3.Press key left and right to move the square left or right;
this may result in fire or electronic shock.
4.Press key up to change the direction;
3.Do not expose the receiver to rain , moisture, direct sunlight
5.Press key down to accelerate the square;
6.Press OK key to pause game, Continue Game Via the left
or do not place it near a heater.
function key, Main Menu returns to the previous menu, reset Game
4.Unplug the receiver from the wall outlet before cleaning. Do
or exit Game.
not use liquid or aerosol cleaners. Use a light damp cloth for
6.3 Hit Rat
cleaning.
Play: press “menu” under normal playing mode and select GAME
5.The hole on top of receiver must be left uncovered to allow
Native Games Hit Rat by step to play the game.
1.There are five function selection menu on the left of the interface
proper airflow to the unit.
6.Do not use any attachment not recommended by product
for user: New Game: Restart Game; peed: Set Game Speed, Press
VOL+/- key to set; Score List: score list; Help information; Exit the
manufacturer as they may cause hazards.
game;
7.Do not connect or modify cables where the receiver is
2.After game-setting,move the cursor to“New Game”parameters,
plugged in. Do not open or remove cover. Refer all servicing to
press“OK”key enter into the game:
3.The direction keys compose 1,2,3,4,5,6,7,8,9 vs top left, top
qualified service personnel.
mid, top right, mid left, mid right, down left, down mid, down right.
4.Press“OK”to pause the game.
Left button“OK” to continue the game.
Left button“OK” return to the previous menu and reset games.
42
3
6 GAMES
Main Features
*Fully compliant with MPEG-2 and DVB-T standards.
If you want to have a rest or to relieve you self after hard working,
you can play some games attached in the system.
*PIG(Picture In Graphic) support.
*Channel editing function.( Favorite ,Moving ,Locking ,Delete).
6 .1 Box Man
*Automatic and manual search.
Play: press“ menu”. under normal playing mode and select
GAME→Native Games→BoxMan step to play the game.
*Stores over 1000 channels.
*Provide electronic program guide(EPG)
*Easy software upgrade .
*Timer function automatically turns on/off by setting function.
*OSD Teletext and VBI Teletext support.
*Support language options(English, Deutsche, French, Swedish,
Portuguese, Finland, Holland, Czech, Greece , Danish, Turkish,
Italian and Spanish total 13 Languages).
*USB Supports the play of JPEG/MP3/MP4 play (AVI/MPG/DAT/VOB)
Figure 5.1 Box Man
and software upgrade.
Accessories
The following have been packed in your receiver box:
*User's manual x1
*Remote control unit(RCU)x1
*Batteries ( AAA type) x2
*Extended R/C box x1
*Mounting LUG x2 with screw x4
*A/V wire x1
*Power supply wire x1
4
1.There are six function selection menus on the left of the
interface for user:
Name Game: Restart game, Reset: reset map, Continue: Continue
game, Level: Display game level, Help: Offer help information, Exit
Game: Exit game;
2.In New Game option, press OK key to enter Game, the function
menu on the left, if turning into grey, can not be used;
3.Press direction keys up, down, left and right to move the cartoon
man here and there.
4.Press OK key Pause Game, you can reset game on the function
menu on the left of the interface.
41
2.Press ENTER key to enter next directory ,every directory can
shown photo file and folder name, as shown in Figure 5.5:
1.Front and rear panel
FRONT
POWER LED
IRRECEIVER
V
USB
IR IN
POWER
IR
L
VIDEO IN
R
AUDIO IN
USB
VIDEO INPUT
AUDIO R/L INPUT
EXTENDED
R/C BOX
Figure 5.5
(1).Press RETURN key to return to the previous directory;
(2).Press UP/DOWN key to choose photo file name;
(3).Press ENTER key to play photo file;
(4).Press PREV key to play previous photo, NEXT key to play next
REAR
ACC, Car Engine Key(Red)
Output GND, DC output ground( Black)
GND,Power Supply ground(Black)
Parking,Parking Switch( Brown )
DC OUT +12~24VDC, 2Amp output (Blue)
BATT,+12~24VDC Power supply input(Yellow)
2.5A FUSE
3.15A FUSE
photo;
(5).Press PREV key to play previous photo, NEXT key to play next
V1
ANT IN
V3
V2
+1 2V- 24 V
OU T
L
R +1 2V- 24 V
IN
DC
IN/
OUT
photo;
(6).In full-screen play state:
1
2
VIDEO OUT
AUDIO OUT
ACC GND
OUT
[1].Press Left, Right key to rotate the photo clockwise/counter
clockwise/counter clockwise by 90 degrees;
[2].Press UP key to view lens photo vertically;
[3].Press DOWN key to exit play mode and return to file directory.
40
TV/MONITOR
1.For car use: Connect the BATT wire to car battery and connect ACC
wire to car ACC switch.
2. For home use: Put BATT and ACC wire together and connect to
B+ 12-24V DC.
3.GND must connect to ground or battery- .
4.DC output ground, connect to the device GND with which use the
DC +12V-24V output.
5
(1).Press RETURN key to return previous directory;
ANT installation
(2).Press UP/DOWN key to choose movie file name;
(3).Press ENTER key to play music file, its interface is as shown
1.ANT-350 /353/355 Structure (optional):
F-TE RMINAL CABLE
POWER LED
BOOSTER
in Figure 5.4;
ANTENNA
2.ANT-350/353/355 Installation:
1.Tint film (sunshine shield film) will cause poor reception due to it has
1
a metallic coating. Install antenna
on a clear window position.
2
2.Set the antenna power supply to
Figure 5.4 Playing music
"ON" in the setup manual of
receiver, and go channel manager
(4).Press FF key to play quickly( × 2, × 4,×8,×20,×1);
to check the signal strength and
(5).Press REW key to rewind music(× 2, × 4,×8,×20,×1);
quality. Move antenna to a best
(6).Press PREV key to play previous music, press NEXT key to
position.
play next music;
3
(7).Press LANGUAGE key to play previous music, press NEXT
4
3.The five install locations
5
are just for your reference.
key to play next music;
(8).Press LANGUAGE key to switch between the left and right
channel and stereo;
(9).Press RETURN key to exit the music play mode and return to
the file directory.
5.3 USB Photo
1.In main menu as shown in Figure 4.1, press UP/DOWN to choose
USB Photo option, press ENTER key to confirm, enter USB main
directory.
6
39
(1).Press RETURN key to return previous directory;
(2).Press UP/DOWN key to choose movie file name;
(3).Press ENTER key to play movies;
(4).Press FF key to play movie quickly( × 2, × 4,×8,×20,×1);
(5).Press REW key to rewind movie(× 2, × 4,×8,×20,×1);
(6).Press SLOW+/- key to slow down movie(1/2,1/4,1);
(7).Press PREV key to play previous, NEXT key to play next movie;
(8).Press LANGUAGE key to switch between the left and right
channel and stereo;
(9).Press PAUSE/STEP key to pause or play;
(10).All movies can be replayed after paused during playing;
(11).Press RETURN exit movie play mode and return to the File
directory.
2.Remote Control Unit(RCU)
- POWER:
Switch the receiver between stand-by
& on modes
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
1
- Mute
:
Mute the audio output
- Numeric Keys(0~9):
For direct entry of channel number or
9
input of alphanumeric characters
- TXT:
EPG
FASTSCAN
Display on the teletext contents of the
0
MENU
EXIT
viewed channel, if teletext is transmitted
- TV/RADIO(GREEN):
CH+
5.2 USB Music
Switch between TV and radio mode
1.In main menu as shown in Figure 4.1, press UP/DOWN to choose
USB Music option, to choose ENTER key to confirm, enter USB
main directory as shown in Figure 5.1:
2.Press ENTER key to enter next directory, every directory can
show music file and Folder name only, as shown in Figure 5.3:
LIST
VOL--
OK
PGUP
VOL+
PGDW
TV/AV
Select the favorite or all channels
- TV/AV:
CHINFO
- FAV (RED):
SUBTITLE
Select between TV and AV mode
- MENU:
FAV
TV/RADIO
AUDIO
TXT
RECALL
PAUSE
Access the main menu
- Audio:
Switch the audio language if
transmitting more then one language
and Select the different audio modes
- EXIT:
To return to previous status or exit
- CH(
/
):
Change channels sequentially up or
down in viewing mode and move to the
Figure 5.3
38
next higher or lower item in the menu
7
Remote Control Unit(RCU)
ABC
1
GHI
DEF
2
3
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
EPG
FASTSCAN
0
MENU
EXIT
CH+
LIST
VOL--
OK
PGUP
VOL+
PGDW
CH-
INFO
FAV
TV/RADIO
TV/AV
SUBTITLE
AUDIO
RECALL
TXT
PAUSE
- VOL( / ):
Alter the Audio output level up or down
in viewing mode or move to the left or
right item in the menu
- OK/LIST:
Select an item or confirm a choice.
A list will enter the channel in viewing
mode
- EPG (Electronic Program Guide):
Call up the EPG function
- INFO:
Display information on viewed channel
- PgUP/ PgDN:
Move up/down a page in the channel
list. Shower movie playing speed while
playing .
- RECALL(YELLOW):
Go back to the previously viewed
channel
- PAUSE(BLUE):
Press once to pause the screen
picture, press once again to go to
the normal mode
-Subtitle:
Switch the subtitle on if the subtitle is
transmitted on this channel
-Fast scan:
Searching all channel quickly
8
1.In main menu as shown in Figure 4.1, press UP/DOWN to
choose USB Movie option, Press ENTER key to confirm, enter
USB main directory as shown in Figure 5.1:
Figure 5.1
2.Press ENTER key to enter next directory, every directory displays
only movie file and folder mane, as shown in Figure 5.2:
Figure 5.2
37
3. Follow up the dialog information and select the root of bin file.
Then press OK for update.
4. If power off is during the update process, the unit can not
recovery and need send back for repair.
4.5 FACTORY DEFAULT
Press OK to dear all programs from a memory before process,
you need enter password(Dlefault password is “0000”)
3.BAS IC FUN CTION S
3.1 Enter into system and power on-off
1.Enter into DVB system
It will enter DVB mode as soon as system power on. Figure
3.1 shows the system interface while none TV/RADIO programs
in the database:
4.6 VERSION
Via menu (MENU Digital TV Version),enter the page
You can be provided with system software information, including
H/W Version, S/W Version, Tuner Type, Date, Time, Press “EXIT”
key to return previous menu. .
5 USB MEDIA PLAY
The unit integrates powerful function to support USB and you
Figure 3.1
It will continue to play the last est program before previous
can connect Ex-equipmentsvia the USB. At present, system can
power off if the database having and TV. or RADIO program.
support usual USB media players and upgrade to system software.
2.Power on
This product supports the play of Mp3, JPEG and MPEG-4(AVI).
It can support only the files displaying in the list and the file format
this product plays.
When it is“standby”mode,press“power”to power on.
3.Power off
When it is running, press“ power” will enter into“standby”mode.
1.Copy media document to USB;
2.Plug in USB device;
3.Enter device in main menu.
3.2 Volume adjustment and Mute
1.Press “VOL+/-”to adjust volume when system is in normal
playing mode: and it will show volume bar on the image.
5.1 USB Movie
2.Press“MUTE”to enter into the mode when normally playing
36
9
and repress“MUTE”to back the normal state.
3. 3 TV/RADIO Programs switch
Press “TV/RADIO”to switch the programs when it is in full
screen.
(8).Press OK key, the system will hint with“Update succeeds” ,
Press EXIT key to return the previous menu.
4.3.6 Parental Lock
You can revise system Password, you can via menu(MENU→Digita
TV→Configuration→Parental Lock) to enter Parental Lock menu.
3.4 Station switch
1.Press “CH+/-”to switch to the previous or next program.
2.Press“OK”to switch to the speediness program list, press
“VOL+/-”to select different program class; press“ CH+/-” to select
1.Press the 0-9 number key on remote controller to input Old
Password, the system defaults Password as “0000” .
2.If the password is input correctly, the cursor can move onto Input
New Password option, press 0-9 number key on the remote controller
program.
Press“OK”to affirm program Selection, press“ EXIT”to hide menu
1.Press number keys to input program number.
2.If there are some favorite programs that been set up, just press
“FAV” to enter into the favorite program list:
to input new 4-digit Password;
3.The cursor move Confirm New Password option, press 0-9number
key press on the remote controller to input new 4-digit Password; if
it is confirmed the new password is different from the new Password
Press“CH+/-” to select favorite program, Press“OK” affirm the
input, the system will hint to input successfully, the system will hint
selection, press“EXIT” to hide menu.
the success and save the setting, and the new password will come
into effect.
3.5 Display information of programs
press key“INFO”to show the information of current programs
when it is in normal playing state. Press again to show more detail
4.4 Software Upgrade
You can automatically update the software of the equipment.
information.
The software of version can support more areas and more
3.6 Program return
Software Upgrade) enter Software Upgrade menu.
function or solve more problems. Via menu(MENU→Digital TV→
Press key“RECALL”under state of full-screen to return to the
previous program played.
4.4.1 Download update BIN file from USB
3.7 Audio language switch and L/R channel
switch
2. Plug the USB into
1. Copy the bin file into USB.
1.Press “AUDIO”key to switch the language of current programs
10
35
key to enter date setting menu as shown in Figure 4.30;
and switch among “stereo”→“Left”→“right”(stereo→left channel→
(6).Set time: move the cursor to On Time option, Press 0-9 number
right channel)
key on the remote controller to revise time;
2.Press “VOL+/-”to switch among “stereo” “left” “right”
(7).Press OK key the system will hint with“Update succeeds”,
(stereo→left channel→right channel),press “CH+/-”to switch the
Press EXIT key to return previous menu.
language of sound.
2. Press Channel
3.Press “OK”key confirm the selection and return to full-screen
(1).Set Wake up Time Event Number: Move the cursor onto Timer
play mode, press “EXIT” to return to full -screen play mode but
No. Option, press VOL+ key to move the cursor onto the list on the
not save the setting.
right, press CH+/- key to choose event number, press OK key to
confirm;
(2).Set Wake up time mode: Default is Off, move the cursor to Timer
Mode options include Once, Daily, Weekly, Yearly as Shown in Figure
4.33.
(3).Set Wake up mode: This option has 4 options as OFF, Message,
Channel, On, Press VOL+/- keys to choose as Channel.
If there is no channel in the database, this option cannot choose
Channel;
3.8 Electronic programs guide(EPG)
1.You can press key“EPG”on the remote controller to enter into
the EPG page the bottom Line shows hint information for keys,
corresponding to the colors on the remote controller: RED,
GREEN, YELLOW, BLUE;
(8).Press“VOL+/-”to switch between Tab 4 and Tab 5 ;
2. Press“GREEN”key to enter into Weekly Mode to display the
programs and program information in different time ranges of the
currently program list within one week, as shown in Figure 3.7:
(4).Move the cursor up word and downward to Wake up Channel
option ,Press VOL+ key to move the cursor onto the list on the right,
Press CH+/- key to choose Preset Channel, Press enter key to
confirm;
(5).Set Date: move the cursor to Wake up Date option, Press VOL+/key to enter date set menu as shown in Figure 4.30;
(6). Set Time: move the cursor to On Time option, Press 0-9 number
key on the remote controller to revise time.
(7).Set Continuous Time: Move the cursor to Duration, Press 0-9
number key on the remote controller to revise time;
34
Figure 3.7 Weekly Mode
11
(1).Press PGUP&PGDW key to switch between Sunday—
Saturday in Tab 3;
3.After time is set, press OK key to save the setting, the system
(2).Press CH+/- key to move upward and downward to switch
will hint with“Update succeeds” .
between the different programs in Tab 5;
(3).Press VOL+/- key to choose to view the program information
in different time ranges in Tab 6.
3. When the cursor stops on Tab 5 in Figure 3.6 Tab 6 in Figure
3.7, press the yellow key to choose the detailed information
corresponding to the current program, as shown in Figure 3.8:
4.3.5 Wake up Timer
If you want to set channel playing at curtain time or giving
hint information . you can set via Wake up Timer →menu .
In Wake up Timer menu, you can set Timer No: set Wake up event
number, the system can support at most 8 events, Timer Mode: set
time mode, Wake up Message: set wake up message, Wake up
Channel: set wake up channel name, Wake up Date: set wake up
date, On Time: set wake up time, Duration: set duration.
1.Hunit with some related message at certain time:
(1).Set Wake up Time Event Number: Move the cursor upward and
downward to Timer No. option, Press VOL+ key to move the cursor
onto the right list, Press CH+/- key to choose event number, Press
OK key to confirm;
(2).Set Wake up mode: set as off, move the choose to Timer Mode
option ,Press VOL+/- key to move circularly and choose among
Figure 3.8 Extended Mode
4. When the cursor stops in Tab 5 of Figure 3.6 and Tab 3.7, press
options, time mode option include off, Once, Daily, Weekly, Yearly.
(3).Set Wake up mode: move the cursor to Wake up Mode option,
the blue key to enter Wake up Timer menu to book programs, as
this option has 4 option as: Off, Message, Channel, On, press
shown in Figure 3.9:
VOL+/-key to choose Message.
(4).Move the cursor to Wake up Message option, Press VOL+/- key
to choose Wake up message information, the system will support
Birthday, Anniversary, General;
(5).Set date: move the cursor to Wake up Date option, press VOL+/-
12
33
4.3.4 Time
Via menu(MENU→ Digital TV→ Configuration time)
You can set Timer Mode in Time page: Timer Mode: set time
mode, Date: set date, Time: set time, GMT Off set: set GMT Off set,
Summer Time: set summer time.
In time menu, there are two time modes, one is Auto setting:
revise via setting GMT Offset, Summer Time options; the other is
Manual setting: revise via setting Date, Time options. When the
Cursor moves onto Timer Mode option, Press VOL+/- key to
Figure 3.9 Wake up timer
choose time mode.
1.The system defaults the setting as Automatic, press CH+/-key
to move upward and downward the cursor to move only between
5. Press“EXIT”to exit from EPG.
Timer Mode, GMT offset and Summer Time.
3.9 Teletext
(1).Move the cursor to GMT offset option, press VOL+ key to
1.If you want to teletext, please press“TTX”on the remote controller
move the cursor into the properties list on the right.
to enter into the teletext page. As shown in the figure below:
(2).Press VOL+/- key to move upward and downward the
cursor to choose, you can see corresponding change in time option,
Press OK key to confirm;
(3).Move the cursor to Summer Time option and then press VOL+/key to set Summer Time;
2.When the setting is Manual, press CH+/- key to move upward and
downward the cursor to move only between timer mode, Date and
Time.
(1).Set Date option, move the cursor upward and downward onto
Date option, press VOL+/- key to enter date setting menu .
Figure 3.10 Teletext page
In date setting menu, press DISPLAY key help information .
(2).Move the cursor upward and downward to Time option, press
0-9 number key to revise values.
32
13
2.Input three digits to go to corresponding page you want;
3.Press“CH+” to go to the previous page, while press“CH-”to go
to the next page;
4.Press“VOL-”to back for 100 pages, while press“VOL+”to
advance for 100 pages.
5.Press“TTX”or“EXIT”to exit from teletext.
3.10 Subtitle
1.Subtitle is defaulted to be off; to see the capitation information,
press the SUB-TITLE key on the remote controller to enter the
Subtitle menu of the current programs.
2.Press VOL+/- key to choose whether to open Subtitle, press
CH+/- key move upward and downward to choose language.
4.DIGITAL TV
In the main menu of the system, under Digital TV, there are such
as options as auto TV search or broad cast programs, program
management, system set up, software update and software
version information view etc.
In Main Menu, press CH+/- key to choose Digital TV option and
then Press OK key once to enter Digital TV menu
choose circularly among the values in this option or press VOL+
key to move the cursor into the right list, press CH+/- key to move
upward and downward the cursor to the choose, press OK key to
confirm;
(3).To edit the option in the System Set up menu, press OK key to
save the information and return previous menu;
(4). Press EXIT key to return the previous menu.
4.3.3.1 EQ setup
To set output sound effect default: standard
4.3.3.2 Surround
To set stage effect default: OFF
4.3.3.3 Active Antenna
Select on to turn on the 5V supply to active
antenna, if ANT circuit short, the ANT power supply will turn off
automatically select OFF for Non-Active antenna.
4.3.3.4 JPEG Effect
You Can turn on the JPEG effect to improve picture Quality of JPEG
4.3.3.5 LCN
If you turn on the LCN (logic channel NO.) function and the
DVB-T program included LCN information, then the channel NO.
will display the LCN channel NO. only after auto channel scan.
LCN channel list usually defined by program vender or broadcaster.
4.1 INSTALLATION
4.3.3.6 Area
There are three kinds of Installation mode as follow:
TO set scanning area and choose, choose area to download
preset channel
Germany/England/Italy/France/Spain/Holand/Taiwan/China/
Norway/Swead/Finland supported, depending on different version.
1. Area Search: searching programs by scan area;
2. Manual Search
3. Auto Search
14
31
1.Move the cursor to Saturation option, Press VOL+ key to move
the cursor into the Properties list on the right.
You can enter into parameter“installation page”via input
password digital (default password is“0000”)
2.Press CH+/- key to move upward the cursor to choose and press
ENTER key to confirm, in this moment, move the cursor onto
4.1.1 Area Search
the options on the left, and then values will become the ones you
Area search is a kind of intelligent and convenient mode of
want.
programs searching, which covers programs of all frequency
3.Saturation can be set as: 0-12; “Update succeeds”;
4.Default:0;
points of target countries and regions.
5.Press OK key to save set, the system will hint with “Update
including: Germany/ England/ Italy/ France/ Spain/ Holland/
succeeds”.
Taiwan/China/ Norway/ Swedish / Finland;
At present, this system covers many targets countries and regions
The default country(region) of system is Germany(you can
4.3.3 System Set up
select target countries you want under system setting scan Area).
System set up menu can provide convenient system set up, you
can via menu(MENU Configuration System Set up) enter
System Set up menu, as shown in Figure 4.27:
1. You can move the cursor to“area search”via press“CH+/-” key
under“install ation menu” ,then press“enter”to enter into area
searching page.
2. After entering into area search page, system will scan all
programs one under frequency points of current countries or
regions selected automatically.
Surround
Active Autenna
LCN
Area
OFF
OFF
OFF
Germany
3.During scanning, press”EXIT” key to stop and exit scanning.
4. If any program is detected and scanning process is finished,
system will exit the scanning page and to play them in window
automatically.
4.1.2 Manual Search
Figure 4.27 System Set up menu
In System Set up menu,
(1).Press CH+/- key to move upward and downward the cursor
to choose option;
(2).When the cursor stays on the option: Press VOL+/- key to
30
If you understand much about digital TV and know the frequency
of the program or if you want to scan the program at any frequency
required, you can select manual scanning, which can save your
much time.
15
1.You can move the cursor to“area search” via press“CH+/-” key
2.Press CH+/- key to move upward and downward the cursor
under “installation menu” ,then press“enter” to enter into area
to choose, press ENTER key to confirm; in this moment, move the
searching page.
cursor onto the options on the left, and then values will become the
2.Prior manual scanning, you need to configure relevant parameters
ones you want.
including:
3.Brightness can be set as: 0%~100%;
(1).Freq(KHz): the default frequency is 474000KHz, you can input
4. Default: 80%;
relevant digital to modify it.;
5. Press OK key to save the setting, the system will hint with
(2).Band Width: the default value of bandwidth is 8 MHz. while you
“Update succeeds”.
can set it to 6 MHz, 7 MHz, 8 Mhz.;
3.Press“OK”key after configuration of start manual scan.
4.If any program is detected and the scanning process is finished,
system will exit the scanning page and save the program, at the
same time return to the“installation menu” and to play them
automatically. As shown in the figure below:
4.3.2.5 Contrast
You can set system constant via contrast option.
1.Move the cursor to contract option, press VOL+ key to move
the cursor into the Properties list on the right.
2.Press CH+/- key to move upward and downward the cursor
to choose, press OK key to confirm, in this moment, move the
cursor onto the options on the left, and then values will become
4.1.3 Auto Search
the ones you want.
You can search the programs of any channel.
1.You can move the cursor to“area search” to enter into area
searching page, As shown in figure below:
3.Contrast can be set as: 0%~100%;
4.Default:80%;
5.Press OK key to save the setting, the system will hint with
“Update succeeds”.
4.3.2.6 HUE
Adjust the system hue.
1.Move the cursor to HUE option Press VOL+ key to move the
cursor into the Properties list on the right.
4.3.2.7 Saturation
Figure 4.7 auto search menu
16
Adjust the system Saturation.
29
2.Prior to auto scanning, you need to configure relevant parameters
4.3.2.3 Video Output
Video output mode can change the mode of video output, you
can adjust TV mode according to the actual situation of you
receiving equipment.
1. Move the cursor to Video Output option, press VOL+/- key
to move circularly and choose options and the setting can be
effective.
2. Video Output mode can be set as CVBS, RGB;
3. Default: RGB;
4. Press OK key to save set, the system will hint with “Update
succeeds”.
including:
(1).Start Freq(KHz):the default frequency is 474000KHz, you can
input relevant digital to modify it.;
(2).End Freq(KHz):the default frequency is 474000KHz. While you
can input relevant digital to modify it;
(3).Band Width: the default value of bandwidth is 8 MHz. while you
can set it to 6 MHz, 7 MHz, 8 MHz .;
3.Press“OK”key after configuration of parameters to start manual
scan.
4.If any program is detected and the scanning process is finished,
system will exit the scanning page and save the program, at the
same time return to the“installation menu” and to play them
4.3.2.4 Brightness
If the brightness is not proper during watching, you can adjust
the current brightness to be a proper one.
1.Move the cursor to Brightness option, press VOL+ key to move
the cursor into the Properties list on the right, as shown in Figure
4.23:
automatically. As shown in the figure below.
4.2 CHANNEL MANAGER
System offer an efficient function of channel management
such as channel deleting, marking, moving, locking, sorting and
grouping.
There are two independent pages for channel management,
TV and RADIO. You can enter the page via“digital TV channel
manager” as shown in the figure below:
Figure 4.23
28
17
will hint with “Update succeeds”and then return to the previous menu.
4.3.2 TV
TV set up provides convenient TV input mode, you can via menu
(MENU→Digital TV→Configuration→TV),enter TV set .
All options are listed on the left of the menu, when the cursor
moves to the option on the left of the TV menu, the values
corresponding to this option can be display on the right of the menu.
Figure 4.8 Channel Manager menu
4.3.2.1 Display Mode
TV mode can change the mode of the on put video, you can adjust
4.2. 1 Channel Organizer
Channel organizer page includes favorite channel deleting,
TV mode according to the actual situation of you receiving equipment.
(1).Move the cursor to Display Mode option, press VOL+/- key to
choose circularly among the options, and the TV mode set can be
moving, locking and rename.
effective immediately;
(2).TV Mode can be set as Auto, PAL, NTSC;
(3).Default TV Mode: AUTO;
(4).Press OK key to save the setting, the system will hint with
“Update succeeds” .
4.3.2.2 Aspect Ratio
Video output mode can change the mode of video out put, you can
adjust TV mode according to actual situation of you receiving
Figure 4.9 Channel Organizer page
equipment.
(1).Move the cursor to Aspect Ratio option, press VOL+/- key to
1.It will pop up and dialogue box prompting that“Channel not
move circularly and choose options;
available”when there are no channels in database to enter into,
(2).Aspect Ratio can be set as 16:9, 4:3 Pan Scan, 4:3 Letter Box;
and it will not enter into channel organizer page.
(3).Default Aspect Ratio 4:3 PS;
(4).Press OK key to save the setting, the system will hint with
18
27
(1).OSD option sets system menu mode ;currently.
2.Channel organizer menu includes: Favorite Channel, Delete
(2).Time on OSD Option sets whether to display system time in full-
Channel, Move Channel ,Lock Channel. Press CH+/- key to choose
screen play channel, Move the cursor to Time on OSD option, press
the line where Favorite Channel is, then press the 4-colorkey on
VOL+/- key to choose between on and off, the default is off.
the remote controller: press the red key to set and cancel Favorite
(3).Trans option sets menu transparency, press VOL+/- key to
Channel, the green key to set or cancel Delete Channel, the yellow
adjust between 0%-60%.
key to set or cancel Move Channel, the blue key to set or cancel
1.OSD Timeout option sets some information hint dialogue box and
lock Channel; After setting, corresponding figure will appear;
displays time length, move the cursor to OSD Timeout option, press
3.To rename channel, press CH+/- key to choose the line
VOL+/- key to choose circularly between Bottom and Top;
where the channel to be renamed is, press VOL+/- key to enter
(4).Trans option sets menu transparency, press VOL+/- key to
the page to renamed is, press VOL+/- key to enter the page to
adjust between 0%-60%.
rename the channel, as shown in Figure 4.10:
1.OSD Language option: The system has the user interface supporting
a couple of languages, you can set language via OSD language option:
(1).Move the cursor onto OSD Language option, Press RIGHT key
to enter OSD Language List as shown in Figure 4.21:
(2).Press VOL+/- key choose language;
(3).Press OK key to confirm system interface language selection,
then the setting is effective, and then the interface language turns into
the currently chosen language, the cursor can move onto OSD
Language, option on the left;
Figure 4.10 Edit Channel-name page
2. 1st Audio Language option: Press VOL+ key to enter the currently
supported Audio Language list, in the Audio Language list, press
4. After program editing, to edit the program, press OK key; to set
CH+/- key to choose language, press OK key to confirm;
or cancel Lock Program, the system will hint to input“0000” ;to set
3. 2nd Audio Language option: Press VOL+ key to enter the currently
Delete program, the system will hint to choose dialogue box“Do
supported Audio Language list, in the Audio Language list, in the Audio
you want to delete the selected items?”,Press VOL+/- key to
Language list, press CH+/- key to choose language, press OK key to
choose, choose “yes” to delete the program chosen,“No”t o cancel;
confirm;
5.Press EXIT key to exit Channel organizer page.
4.Press OK key to confirm the editing action in OSD menu, the system
26
19
4.2.2 Channel Sorting
The channel is shall be listed according to certain sequence so
that the user can easily find them .
4.3 CONFIGURATION
Configuration provides individualized system setup function,
you can configure the system according to your own hobby and
demand. You can enter Configuration menu via the menu
(MENU→Digital TV→Configuration) .
4.3.1 OSD
Via OSD option setup, you can set the user interface display mode
according To your own demand. Via the menu ( MENU →Digita TV→
Configuration →OSD) ,You can enter OSD menu, as shown in
Figure 4.11 Channel Sorting page
Figure 4.20:
1.It will pop up and dialogue box prompting that“Channel not
available”when there are no programs in database to enter into,
and it will not enter into channel sorting page.
2.Before sorting, the type of sorting shall be set, including the
following items:
(1).First Option: choose the programs to be sorted via the
selection area;
(2).Second Option: Press FTA(free to air),Scramble(encrypted),
ALL Free and Encrypted Channels;
(3).Third Option: According to alphabetic order A-Z, or Z-A;
Figure 4.20 Setting page
3.Press CH+/- key choose type , Press VOL+/- key to set Sorting
All options are listed on the left of the OSD menu, when the cursor
Parameters;
moves on the option in OSD menu, the values corresponding to this
4.After sorting is set, to realize channel sorting, press OK key, then
option on the right or the menu, press CH+/- key to move upward
the system will hint with dialogue box “Are you sure?”as shown in
and downward to choose the options in OSD menu, press CH+/- key
Figure 4.12:
to move upward and downward to choose the options in OSD menu.
There are following options in OSD menu:
20
25
๭
Figure 4.12
Figure 4.16 edit channel page
To choose “yes”to confirm, you can see the programs in the
program list; to choose“No”to cancel, you can return to Channel
The operation for this menu is as that of Add Channel page.
4.2.5 Delete
Sorting page;
6.Press EXIT key to exit Channel Sorting page.
If you do not like one or some channel, you can delete it/them in
Channel Organizer menu (Chapter 4.2.1),but, if you do not like all
TV or Radio, you can enter Delete All menu to choose to delete all
4.2.3 Channel Grouping
Group channels according to Movies, Sport, Music, Kids, Fashion etc.
TV ,RADIO.
1.Under Channel Manager menu, press CH+/- key to choose
Delete All option, press OK key again, then the system will hint the
dialogue box of in putting password which is defaulted as“0000”,
input the proper password via the 0-9 number key of the remote
controller, then enter Delete All menu .
2. To delete all TV channels, press CH+/- key to move the cursor
to ALL TV Channels option, press OK key, then the system will hint
with “Delete All TV Channels?”
Figure 4.13 Channel Grouping page
Press VOL+/- key to choose “Yes”or“No”,press OK key to
1.It will pop up and dialogue box prompting that “Channel not
confirm.
available” when there are no programs in database to enter into,
3.All set up and operation are the same as in TV channel.
and it will not enter into channel grouping page.
24
21
2.Press CH+/- key to choose the line where the channel to be
grouped is in, then press the number keys 1-8 on the remote
controller to set different channel grouping.
3. After channel is edited, when EXIT key is pressed to exit the
menu, if actual channel editing action exists, the system will carry
out channel grouping renewal, with the hint of“Update succeeds”.
4.2.4 Edit Channel
Have such operation as add, Delete and Rename to channels.
Figure 4.15 Add Channel Page
Under Add Channel menu, there are 6 parameters for adding
one channel as follows:
(1). Area Name: For Area Name, press the VOL+ key of the
remote controller to enter the Area Name list on the right, then
press CH+/-key to choose area name, press OK key to confirm;
(2).Carrier:PressVOL+/-T key to choose;
(3).Channel Name: Press VOL+/- key to enter Rename Channel
Figure 4.14 Add-Edit Channel Page
1.It will pop up and dialogue box prompting that:“No Carrier”when
page as shown in Figure 4.10;
(4).Audio PID, Video PID, PCR PID, Press 0-9 number key to
there are no programs in database to enter into, and it will not enter
reviser values;
into ADD-Edit Channel page.
(5).Press OK key to confirm the adding, the system will hint with
2.Press the red key of the remote controller to enter Add Channel
“Update succeed”and return to Edit Channel menu;
menu, as shown in Figure 4.15:
(6).Press EXIT key to return to Edit Channel page.
3.Press the yellow key to remote controller to enter Rename
Channel menu, as shown in Figure 4.16:
22
23