HPE ProLiant BL460c Gen9 Server Blade

QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Overview
HPE ProLiant BL460c Gen9 Server Blade
1.
2.
3.
4.
5.
6.
HPE ProLiant BL460c Gen9 Server Blade – Internal View
FlexibleLOM adapter
7. USB 3.0 and TPM
Nand Flash & Micro SD
8. Embedded SATA Connector
Mezzanine Slots (x16 PCI 3.0)
9. Solid State Device Connector
Sixteen (16) DDR4 DIMM slots (8 per processor)
10. Two hot-plug drive bays
Up to two (2) Intel® Xeon® E5-2600 v3 or v4 family
11. HPE Smart Array P244br Controller with 1GB FBWC
processors
HPE BLc 12W Smart Storage Battery connector
12. iLO Management Engine
What's New
•
•
•
Workload acceleration with NVMe SSDs and Persistent Memory
Support for 2400MT/s DDR4 memory
Support for the Intel E5-2600 v4 Product Family
Page 1
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Standard Features
NOTE: This document covers the HPE ProLiant BL460c Gen9 server blade only. For information on HPE BladeSystems c-Class
Enclosures and HPE BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HPE BladeSystem c-Class Enclosures QuickSpecs:
• HPE BladeSystem c3000 Enclosure QuickSpecs at https://www.hpe.com/h20195/v2/GetPDF.aspx/c04128340.pdf
NOTE: The c3000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c7000 Enclosure QuickSpecs at https://www.hpe.com/h20195/v2/GetPDF.aspx/c04128339.pdf
NOTE: The c7000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c-Class Interconnect and Mezzanine Components at
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For optimal cooling and system performance the BL460c Gen9 Server Blade requires the c7000 enclosure to be
configured with 10 fans and the c3000 enclosure to be configured with 6 fans.
NOTE: For proper BladeSystem operation, the minimum required versions of HPE Onboard Administrator and HPE Virtual
Connect are required and available via the HPE Service Pack for ProLiant, please see
http://h17007.www1.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section.
Processor
E5-2600 v4 series Processors
One of the following HPE BL460c Gen9 Intel® Xeon® E5-2690v4 (2.6GHz/14-core/35MB/135W)
depending on Model
HPE BL460c Gen9 Intel® Xeon® E5-2683v4 (2.1GHz/16-core/40MB/120W)
HPE BL460c Gen9 Intel® Xeon® E5-2680v4 (2.4GHz/14-core/35MB/120W)
HPE BL460c Gen9 Intel® Xeon® E5-2660v4 (2.0GHz/14-core/35MB/105W)
HPE BL460c Gen9 Intel® Xeon® E5-2650v4 (2.2GHz/12-core/30MB/105W)
HPE BL460c Gen9 Intel® Xeon® E5-2650Lv4 (1.7GHz/14-core/35MB/65W)
HPE BL460c Gen9 Intel® Xeon® E5-2640v4 (2.4GHz/10-core/25MB/90W)
HPE BL460c Gen9 Intel® Xeon® E5-2630v4 (2.2GHz/10-core/20MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2630Lv4 (1.8GHz/10-core/25MB/55W)
HPE BL460c Gen9 Intel® Xeon® E5-2623v4 (2.6GHz/4-core/10MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2620v4 (2.1GHz/8-core/20MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2609v4 (1.7GHz/8-core/20MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2603v4 (1.7GHz/6-core/15MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2699v4 (2.2GHz/22-core/55MB/145W)
HPE BL460c Gen9 Intel® Xeon® E5-2698v4 (2.2GHz/20-core/50MB/135W)
HPE BL460c Gen9 Intel® Xeon® E5-2697v4 (2.3GHz/18-core/45MB/145W)
HPE BL460c Gen9 Intel® Xeon® E5-2697Av4 (2.6GHz/16-core/40MB/145W)
HPE BL460c Gen9 Intel® Xeon® E5-2695v4 (2.1GHz/18-core/45MB/120W)
HPE BL460c Gen9 Intel® Xeon® E5-2667v4 (3.2GHz/8-core/25MB/135W)
HPE BL460c Gen9 Intel® Xeon® E5-2643v4 (3.4GHz/6-core/20MB/135W)
HPE BL460c Gen9 Intel® Xeon® E5-2637v4 (3.5GHz/4-core/15MB/135W)
E5-2600 v3 series Processors
Page 2
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Standard Features
HPE BL460c Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W)
HPE BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W)
HPE BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W)
HPE BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W)
HPE BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W)
HPE BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W)
HPE BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W)
HPE BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W)
HPE BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W)
HPE BL460c Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W)
HPE BL460c Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W)
HPE BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W)
HPE BL460c Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W)
HPE BL460c Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W)
HPE BL460c Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W)
HPE BL460c Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W)
HPE BL460c Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W)
NOTE: All processors within the server must be identical.
NOTE: DIMM slots 4 and 5 are not accessible when the E5-2699 v4, E5-2697 v4, E5-2697A v4, E5-2667
v4, E5-2643 v4, E5-2637 v4, E5-2699 v3, the E5-2697 v3, the E5-2643 v3, the E5-2637 v3, or the E52667 v3 is used. In a 2 processor configuration, there are twelve (12) total available DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above, please reference the
'Memory Speed by Processor Model' table in the Memory section of the QuickSpecs.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies except the
E5-2609 v4, E5-2603 v4, E5-2603 v3 and E5-2609 v3.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend
on the quantity and type of DIMMs installed.
NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-2600 v3 and v4 Series, the letter preceding the model number
indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is socket/segment
designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE: The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must be installed in
processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A processor must be
installed in processor slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE: The letter "L" following the model number indicates denotes lower wattage.
55MB (1x55MB) L3 cache
Cache Memory
One of the following NOTE: For Twenty two-core processors.
depending on Model
50MB (1x50MB) L3 cache
NOTE: For Twenty-core processors.
45MB (1x45MB) L3 cache
NOTE: For Eighteen-core processors.
40MB (1x40MB) L3 cache
Page 3
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Standard Features
NOTE: For Sixteen-core processors.
35MB (1x35MB) L3 cache
NOTE: For Fourteen-core processors.
30MB (1x30MB) L3 cache
NOTE: For Twelve-core processors.
25MB (1x25MB) L3 cache
NOTE: For Ten or Eight-core processors.
20MB (1x20MB) L3 cache
NOTE: For Six, Eight, or Ten-core processors.
15MB (1x15MB) L3 cache
NOTE: For Quad or Six-core processors.
10MB (1x10MB) L3 cache
NOTE: For Quad-core processors.
Chipset
Intel® C610 Series Chipset
Intel® E5-2600 v3 or v4 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following:
http://www.intel.com/content/www/us/en/chipsets/chipsets-overview.html
Upgradeability
Upgradeable to two (2) processors
On System
Management
Chipset
HPE iLO (Firmware HPE iLO4 2.0), 4GB NAND with 1GB USB user space configurable via UEFI and
accessible via iLO. Read and learn more in the iLO QuickSpecs.
NOTE: For more information, visit: https://www.hpe.com/us/en/servers/integrated-lights-out-ilo.html
Memory Protection Advanced ECC
Memory Mirroring
Memory Online Spare Mode (Rank Spare Mode)
Type
Memory
One of the following
depending on Model
Standard (Preconfigured Models)
Maximum (LRDIMM)
HPE SmartMemory
DDR4 Load Reduced (LRDIMM), or Registered (RDIMM)
256GB (8 x 32GB) DDR4 2400MT/s LDIMMs at 1.2V
128GB (4x 32GB) DDR4 2400MT/s LDIMMs at 1.2V
64GB (4 x 16GB) DDR4 2400MT/s RDIMMs at 1.2V
32GB (2 x 16GB) DDR4 2400MT/s RDIMMs at 1.2V
16GB (2 x 8GB) DDR4 2400MT/s RDIMMs at 1.2V
128GB (4 x 32GB) DDR4 2133MT/s RDIMMs at 1.2V
64GB (4 x 16GB) DDR4 2133MT/s RDIMMs at 1.2V
32GB (2 x 16GB) DDR4 2133MT/s RDIMMs at 1.2V
32GB (2 x 16GB) DDR4 2133MT/s RDIMMs at 1.2V
16GB (2 x 8GB) DDR4 2133MT/s RDIMMs at 1.2V
16GB (2 x 8GB) DDR4 2133MT/s RDIMMs at 1.2V
2TB (16 x 128GB) up to 2400MT/s at 1.2V
Page 4
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Standard Features
Maximum (RDIMM)
512GB (16 x 32GB) up to 2133MT/s at 1.2V
NOTE: HPE memory from previous generation servers (DDR3) is not compatible with this server. HPE
SmartMemory is required to realize the memory performance improvements and enhanced functionality
listed in this document for Gen9. For additional information, please see the HPE SmartMemory QuickSpecs
at: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
2400MT/s, 2133MT/s, 1866MT/s, or 1600MT/s. Please see Memory Population Table or the Online
Memory Configuration Tool at:
https://h22195.www2.hpe.com/DDR4memoryconfig/Home/SelectServer
Network Controller One (1) 20Gb 2-port FlexFabric FLB, 10Gb 2-port HPE FlexFabric FLB, or 10Gb 2-port Ethernet FLB
One of the following NOTE: Supports FCoE, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and
depending on Model autosensing 10Gb/1Gb Ethernet.
NOTE: Each port is autosensing the speed, and can interoperate with 1Gb HPE BladeSystem c-Class
interconnect components. Both ports will operate at the same speed.
NOTE: FlexFabric capabilities require the use of an HPE Virtual Connect FlexFabric or Flex10/10D module
module.
Fibre Channel over Ethernet (FCoE) is supported with HPE interconnects. Learn more at:
https://www.hpe.com/us/en/integrated-systems/virtual-connect.html
One (1) HPE FlexFabric 10Gb 2-port 536FLB FlexibleLOM
One (1) HPE FlexFabric 20Gb 2-port 650FLB FlexibleLOM
NOTE: FlexibleLOMs are not compatible with prior generation c-Class server blades
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HPE iLO 4 to Onboard Administrator link. The Onboard Administrator
(with 10/100/1000 Mbps) to BladeSystem link is 1Gbps
Expansion Slots
Two (2) I/O expansion mezzanine slots:
• x16 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to
interconnect module bay 3 and the other to bay 4.
• x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).
NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port
cards, one port is routed to interconnect module bay 5 and the other to bay 6. For quad-port
cards, one port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to bay
8.
NOTE: A second processor must be installed (in processor slot 2) to have access to the second
expansion slot (expansion slot 2).
Mezzanine card options include:
• Dual-port 20Gb FlexFabric, Dual-port 10Gb FlexFabric, 10GbE options, and quad-port 1Gb Ethernet
server adapter mezzanine options for additional network ports.
• Dual-port 16Gb Fibre Channel HBA for SAN connectivity.
• QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity.
• I/O accelerator mezzanine options for high transaction rate local storage
HPE Server ROM
HPE ROM (read only memory) is now digitally signed using the HPE Corporate Signing Service. This
signature is verified before the flash process starts, reducing accidental programming and preventing
Page 5
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Standard Features
malicious efforts to corrupt system ROM.
HPE ROM provides for essential initialization and validation of hardware components before control is passed
to the customer-installed operating system. The ROM also provides the capability of booting from various
fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.
HPE ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early phase
of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these
configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.
The HPE ProLiant ROM is used to configure the following:
• Processor and chipset status registers
• System memory, memory map, and memory initialization
• System hardware configuration (integrated PCI devices and optional PCIe cards).
• Customer-specific BIOS configuration using the HPE ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to the HPE RBSU (ROM based setup utility) user guide:
http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c00191707
HPE Server UEFI
/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and
more secured configuration while interacting with your server at boot time. HPE ProLiant Gen9 platform
defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU) of
legacy BIOS. For more information, please visit http://www.hp.com/ctg/Manual/c04398276.pdf
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
• Secure Boot
• Operating system specific functionality
• Support for > 2.2 TB (using GPT) boot drives
• USB 3.0 Stack
• Embedded UEFI Shell
• Mass Configuration Deployment Tool using HPE RESTful API
• PXE boot support for IPv6 networks
• Boot support for option cards that only support a UEFI option ROM
NOTE: For more information please visit http://www.hp.com/ctg/Manual/c04398276.pdf
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly
to support UEFI.
NOTE: HPE UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in
the factory.
Storage Controller All BTO Models
One (1) HPE Smart Array P244br Controller with 1GB Flash-Backed Write Cache
(FBWC) supporting RAID 0 and RAID 1, or HPE H244br Smart HBA.
NOTE: The HPE Smart Array P244br, the HPE H244br Smart HBA, and the HPE
B140i (chipset SATA). Support two (2) small form factor (SFF) hot plug drive bays.
NOTE: For NVMe support, please select the NVMe FIO setting (825555-B21)
available on CTO models only.
Maximum Internal
Storage
One of the following
depending on Model
4.0TB
4.0TB
7.68TB
Hot Plug SFF SAS
Hot Plug SFF SATA
Hot Plug SFF SAS
SSD
2 x 2.0TB
2 x 2.0TB
2 x 3.84TB
Page 6
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Standard Features
Hot Plug SFF SATA 7.68TB
2 x 3.84TB
SSD
Hot Plug SFF NVMe 4.0TB
2 x 2.0TB
SSD
NOTE: The ProLiant BL460c Gen9 server includes the HPE hot plug small form factor (SFF) SmartDrive
carrier for enhanced management and reduced maintenance errors. HPE drives from previous generation
servers (prior to Gen8) are not compatible with the ProLiant BL460c Gen9 drive bays.
Interfaces
Micro SDHC Slot
One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slot
USB 3.0 Port
One (1) internal USB 3.0 connector for USB flash media drive keys
NOTE: The above options are intended for integrated hypervisor virtualization environments.
Industry Standard
Compliance
ACPI 2.0
Microsoft® Logo certifications
USB 3.0 Support
IPMI 2.0
Secure Digital 2.0
TPM 1.2 Support
IEEE (specific IEEE standards depending on Ethernet adapter card(s) installed)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
Active Directory v1.0
PCIe 3.0
ASHRAE A3
FIPS 140-2 Level-1 certification
Energy Star
NOTE: Energy Star Family level certification covering all BL460c Gen9 E5-2600 v3 configurations that do
not include the Intel Xeon E5-2699v3 processor. For more information, visit
http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/energystarservers.html
Operating Systems
and Virtualization
Software Support
for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Canonical Ubuntu
Oracle Solaris
VMware
NOTE: For more information on the HPE Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit our
Support Matrix at: http://www8.hp.com/us/en/products/servers/management/operatingenvironments/os-support-matrix.html and our driver download page:
http://www8.hp.com/us/en/products/proliant-servers/product-detail.html?oid=7271227
Enclosures
Hewlett Packard Enterprise offers two different c-Class server blade enclosures to meet your individual
needs:
• The HPE BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant
BL460c Gen9 servers plugged vertically.
• The HPE BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HPE ProLiant
BL460c Gen9 servers plugged horizontally.
Page 7
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Standard Features
Server blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator modules
are all designed to fit into the c3000 and c7000 enclosures.
NOTE: For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html
Graphics
Integrated Matrox G200eh video controller
• 1600 x 1200 (32 bpp)
• 1920 x 1200 (16 bpp)
HPE iLO Management On System Management Memory
• 16 MB Flash Video Memory
• 256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
HPE ProLiant BL460c Gen9 is a half-height server blade that plugs into the HPE BladeSystem c3000 and
c7000 enclosures.
Embedded
Management
HPE Integrated
Lights Out
Monitor your servers for ongoing management, service alerting, reporting and
remote management with iLO. Learn more at
https://www.hpe.com/us/en/servers/integrated-lights-out-ilo.html
UEFI
Configure and boot your servers securely with industry standard Unified Extensible
Firmware Interface (UEFI). Learn more at
http://www8.hp.com/us/en/products/server-software/productdetail.html?oid=6935826.
HPE RESTful API
RESTful API is an application programming interface. RESTful Web Service API
served by iLO’s web server.
https://www.hpe.com/us/en/servers/restful-api.html.
Intelligent
Provisioning
Provision servers by discovering and deploying 1 to few servers with Intelligent
Provisioning. Learn more at http://www8.hp.com/us/en/products/serversoftware/product-detail.html?oid=5219984
HPE Smart Update
Optimize firmware and driver updates with HPE Smart Update solutions. Learn more
at
http://h17007.www1.hpe.com/us/en/enterprise/servers/products/service_pac
k/hpsum/index.aspx
Server Utilities
HPE Systems Insight HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE
Manager (HPE SIM) Integrity Servers, and also provides you with basic support for non-Hewlett Packard
Enterprise servers. HPE SIM also integrates with HPE SUM to provide quick and
seemless firmware updates. Learn more at
http://www8.hp.com/us/en/products/server-software/productdetail.html?oid=489496
Scripting Tool Kit and Provision 1 to many servers using your own scripts to discover and deploy them with
Windows PowerShell HPE Scripting Tool Kit for Windows and Linux or HPE Scripting Tools for Windows
PowerShell.
HPE RESTful
HPE RESTful API tool is a scripting tool to provision servers using RESTful API
Page 8
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Standard Features
Security
Interface Tool
Interface to discover and deploy servers at scale. Learn more at
https://www.hpe.com/us/en/servers/restful-api.html
HPE iLO Mobile
Application
Enables the ability to access, deploy, and manage your server anytime from
anywhere from select smartphones and mobile devices. For additional information
please visit: http://www8.hp.com/us/en/products/servers/ilo/mobile.html
HPE Insight Online
HPE Insight Online, available at no additional cost as part of your HPE warranty, Care
Pack or contractual support agreement with Hewlett Packard Enterprise, is a
personalized dashboard for simplified tracking of IT operations and support
information from anywhere, anytime. Learn more at
http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c03178991
•
•
•
•
•
•
•
•
•
•
•
Availability
Power-on password
Administrator's password
Keyboard password (QuickLock)
HPE iLO Management On System Management Chipset with:
− SSL encryption
− Secure Shell version 2
− Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on
browser, CLP and XML scripting interface
− AES and RC4 encryption of video
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 2.0 option
Advanced Encryption Standard (AES)
Intel® Advanced Encryption Standard-New Instructions (AES-NI)
FIPS 140-2 Level-1 certification
Memory
•
•
•
•
•
Advanced ECC uses single device data correction (SDDC) to detect and correct single and all multibit error that occurs within a single DRAM chip. Both x4 and x8 SDDC are supported (x8 requires
lockstep mode).
Memory online spare mode (also known as rank spare mode) detects a rank that is degrading and
switches operation to the spare rank.
Memory demand and patrol scrubbing to prevent accumulation of correctable errors and reducing
the likelihood of unplanned downtime.
Failed DIMM isolation improves the service time thus improving the overall system availability.
Address parity protection available on RDIMMs and LRDIMMs detects address bit errors to improve
service time and overall system availability.
Mezzanine options and I/O
• Support for one (1) FlexibleLOM, providing two (2) (i.e. redundant) Ethernet ports
• Multiple mezzanine I/O expansion slots that support a wide variety of mezzanine cards each
supporting multiple data paths routed to redundant interconnect modules.
• Network Adapter Teaming (bonding) provides network fault tolerance, transmit load balancing, and
switch-assisted load balancing.
Storage
•
•
Two (2) Small Form Factor hot-plug SAS/SATA HDD or SSD or NVMe SSD drive bays.
Choice of the HPE Smart Array P244br Controller with 1GB FBWC, HPE Smart HBA H244br, or the
HP B140i (chipset SATA). RAID 0 and 1 support for all three storage controller offerings.
Page 9
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Standard Features
•
Optional dual-port Fibre Channel mezzanine card(s) for redundant SAN connections.
NOTE: For NVMe support, please select the NVMe FIO setting (825555-B21) available on CTO
models only.
Processor/Chipset
• Processor internal sensors & thermal control protection against over-temperature conditions.
• Cache parity/ECC protects cache data from accidental data corruption.
• Machine Check Architecture (MCA) detects and captures hardware errors such as system bus,
memory ECC, parity, and cache, and improves service time.
• Intel® QPI Protocol Protection allows detection of data errors using a checksum of 8-bits.
• Core Disable for FRB (fault resilient boot) allows a system to power-on despite a failing core-pair. It
uses BIST (built-in self-test) results to detect a failure and disables the target core-pair upon
subsequent boot.
Server Blade Enclosure Infrastructure
• Pooled power for true N+N power redundancy through up to six (6) hot-plug, high-efficiency,
common slot enclosure-based power supplies (configuration dependent).
• Up to ten (10) enclosure-based hot-plug HPE Active Cool fans that scale to meet future demands,
optimize airflow, reduce power draw, and improve acoustic performance.
• Dual grid power providing redundant rack enclosure power feeds to the server blade enclosure.
• HPE Dynamic Power Saver Mode monitors the total enclosure power consumption in real time and
automatically adjusts with change in demand for improved efficiency and reliability.HPE Dynamic
Power Capping safely limits power usage without impacting performance by capping peak usage
instead of average power usage, removes risk to electrical infrastructure with a fast-acting,
hardware-based capping algorithm, and reclaims more power by dynamically controlling power limits
based on workload demand.
• Up to eight interconnect modules per server blade enclosure providing four simultaneous redundant
fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, Pass Thru Ethernet, etc.
• Enclosure crosslinks between adjacent enclosures to provide interconnect module-to-module
connections or as Virtual Connect module stacking links.
• Optional enclosure redundant Onboard Administrator system management module.
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide
network of Hewlett Packard Enterprise Authorized Channel Partners. Hardware diagnostic support and repair
is available for three years from date of purchase. Support for software and initial setup is available for 90
days from date of purchase. Enhancements to warranty services are available through HPE Care Pack
services or customized service agreements. Certain restrictions and exclusions apply. Hard drives have either
a one year or three year warranty; refer to specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support. Warranty repairs may
be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories:
1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy
replacement but may involve added complexity. Customers may choose to have HPE replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical support is
available at http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
Page 10
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Optional Features
Fibre Channel
Support
Up to two (2) optional Fibre Channel mezzanine HBAs are supported on the HPE ProLiant BL460c Gen9.
Compatible SAN
HPE ProLiant BL460c Gen9 server blades are optimized for HPE MSA, EVA, 3PAR and XP.
HPE ProLiant BL460c Gen9 server blades are compatible with select 3rd party SANs. Please see blade storage
page for more details at https://www.hpe.com/us/en/integrated-systems/bladesystem.html.
HPE Virtual
Connect
HPE Virtual Connect is an interconnect option for c-Class BladeSystem that simplifies server connectivity to
data and storage networks, and reduces costs. Unique HPE Flex-10 technology makes maximum use of
network bandwidths, provide dynamic tuning and enable extreme flexibility to meet individual server and
infrastructure requirements by allocating up to 4 network connections per server port. Virtual Connect
FlexFabric modules extend those capabilities to allocate one function per port to storage connections (FCoE).
HPE OneView’s software-defined approach to infrastructure management enables central console to administer
network connections and workloads for thousands of servers, see
https://www.hpe.com/us/en/integrated-systems/management-software.html
For more information on Virtual Connect Ethernet, Fibre Channel, Converged Network and management
options, see https://www.hpe.com/us/en/integrated-systems/virtual-connect.html
Embedded
Management
iLO Advanced for
BladeSystem
HPE iLO Advanced for BladeSystem licenses offer smart remote functionality without
compromise, for all HPE ProLiant servers. The license includes the full integrated
remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration,
console record and replay, and GUI-based and scripted virtual media and virtual
folders. You can also activate the enhanced security and power management
functionality. Learn more about HPE iLO Advanced at
https://www.hpe.com/us/en/servers/integrated-lights-out-ilo.html.
Server
Management
HPE Insight Control
HPE Insight Control, lets you deploy, migrate, monitor, remote control, and optimize
your IT infrastructure through a single, simple management console. For more
information, see http://www8.hp.com/us/en/products/server-software/productdetail.html?oid=3312156
HPE OneView
Powerful converged management of servers, storage, and network for IT service
automation and infrastructure simplicity.
HPE Matrix
Operating
Environment
The HPE Matrix Operating Environment (Matrix OE) for ProLiant and Integrity servers
is an integrated command center that helps you instantly adjust to dynamic business
demands. This advanced infrastructure management software lets you reduce the cost
of common data center tasks by up to 40 percent while keeping pace with your
changing business. The HPE Matrix OE includes the automated provisioning,
optimization, and recovery management capabilities for HPE CloudSystem Matrix, the
ideal platform for private cloud and Infrastructure as a Service (IaaS).
For more information, visit:
http://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNu
mber=HPID
HPE Insight Cluster
Management Utility
HPE Insight Cluster Management Utility is a Hyperscale management framework that
includes software for the centralized provisioning, management and monitoring of
Page 11
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Optional Features
(CMU)
nodes and infrastructure.
Learn more at http://www8.hp.com/us/en/products/server-software/productdetail.html?oid=3296361
High Performance HPE Cluster
Clusters
Platforms
HPE HPC
Interconnects
HPE Cluster Platforms are specifically engineered, factory-integrated large-scale
ProLiant clusters optimized for High Performance Computing, with a choice of servers,
networks and software. Operating system options include specially priced offerings for
Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft
Windows HPC Server. A Cluster Platform Configurator simplifies ordering.
http://www8.hp.com/us/en/products/servers/scalablesystems/clusterplatform.html
High Performance Computing (HPC) interconnect technologies are available for this
server as part of the HPE Cluster Platform portfolio. These high-speed InfiniBand and
Gigabit interconnects are fully supported by Hewlett Packard Enterprise when
integrated within an HPE cluster.
Storage Software Whether you need to solve a specific data protection, archiving, or storage command and control challenge, or
deliver on strategic consolidation, compliance, or continuity initiatives, look no further than HPE storage
software. Our storage software helps you reduce costs, simplify storage infrastructure, protect vital assets and
respond faster to business opportunities.
Storage software that gets the job done:
• Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HPE data protection and recovery software
will cost-effectively protect you against disaster and ensure business continuity.
• Data Archive and Migration Software
The HPE storage software enables you to comply with data retention and retrieval requirements,
improve application performance, and reduce costs by efficiently migrating infrequently accessed or
less valuable data to lower cost storage.
• Storage Resource Management Software (SRM)
The HPE storage resource management software reduces operational costs and provides the
command and control foundation you need to efficiently manage and visualize your physical and
virtual environments.
• Data Replication Software
Hewlett Packard Enterprise offers array-based and host-based replication software for use in disaster
recovery, testing, application development and reporting.
• Storage Device Management Software
Maximize your investment in HPE storage and networking with software that enables hardwarespecific configuration, performance tuning and connectivity management.
• HPE StoreVirtual VSA
HPE StoreVirtual VSA allows you to create fully featured shared storage on a VMware vSphere or
Microsoft Hyper-V virtualized server. This server model starting November 2013, includes a limited
license for HPE StoreVirtual VSA software with 1TB of capacity. To download the license key and
StoreVirtual VSA software, visit: http://www8.hp.com/us/en/products/storage-software/productdetail.html?oid=5306917
NOTE: You will need your server serial number in order to complete the registration form. Fully
functional, capacity-based licenses are available in 4TB, 10T and 50TB sizes.
NOTE: For more information available Storage Software including QuickSpecs, please see:
http://www.hpe.com/storage
Page 12
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Optional Features
HPE Insight Online HPE Insight Online is part of the HPE Support Center for one stop, secure access to product and HPE support
information personalized to your IT environment. Insight Online can automatically display devices remotely
monitored by HPE Remote Support tools. With Insight Online's easy navigation you can efficiently track your IT
support contracts and device status from anywhere and at anytime.
https://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNumber=RSSWMBASE
Get connected to
HPE
To get the most from your investment in Hewlett Packard Enterprise servers, get connected to Hewlett
Packard Enterprise using our innovative remote support technology which provides system health monitoring,
pre-failure alert notification and more.
Expansion Blade
Support
Supports one (1) optional D2220sb storage or PCI expansion blade
NOTE: Expansion blade support requires the use of either the HPE Dynamic Smart Array B140i or the HPE
Smart Array P246br controller.
NOTE: Expansion blade support requires server firmware versions from SPP 2015.04 or later.
Factory Express
Portfolio for
Servers
and Storage
HPE Factory Express offers configuration, customization, integration and deployment services for Hewlett
Packard Enterprise servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration
and design services as well as individual factory services, such as image loading, asset tagging, and custom
packaging. Hewlett Packard Enterprise products supported through Factory Express include a wide array of
servers and storage: HPE Integrity, HPE ProLiant, HPE ProLiant Server Blades, HPE BladeSystem, HPE 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server model please contact your sales
representative or go to: http://www8.hp.com/us/en/campaigns/factory-express/server-storagenetworking.html
HPE Simple
Configurator
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your
existing ordering processes. If you require "custom" rack configuration or configuration for products not
available in SCE, please contact the HPE Customer Business Center or an Authorized Partner for assistance.
https://h22174.www2.hp.com/SimplifiedConfig/Index
Page 13
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
Service and
Support
Protect your business beyond warranty with HPE Support Services
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster HPE Support
Services enable you to choose the right service level, length of coverage and response time as you purchase
your new server, giving you full entitlement for the support for need for your IT and business.
Connect your devices
Unlock all of the benefits of your technology investment by connecting your products to HP Enterprise.
Achieve up to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a single consolidated view
of your environment. By connecting, you will receive 24x7monitoring, pre-failure alerts, automatic call
logging, and automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter Care Service
customers will also benefit from proactive activities to help prevent issues and increase optimization. All of
these benefits are already available to you with your server storage and networking products, securely
connected to Hewlett Packard Enterprise support.
1 – IDC
2 – HP CSC reports 2014 - 2015
Optimized
Support
recommendation
HPE Proactive Care Advanced - 24x7 coverage, three year Support Service
This services helps achieve a higher return on your product investment with personalized support from a
local assigned Account Support Manager who will share best practice advice and personalized
recommendations designed to help improve availability and performance to increase stability and reduce
unplanned downtime. Leverage your system’s ability to connect to Hewlett Packard Enterprise for prefailure alerts, automatic call logging and parts dispatch. For business critical incidents, this service offers
critical event management to reduce mean time to resolution. This recommendation provides 24x7
coverage with four-hour response for hardware and collaborative support that offers two-hour callback for
supported software issues. Collaborative software management is included with independent software
vendors unless you have your software support from Hewlett Packard Enterprise where we own all cases
from start through to resolution.
https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA5-3259ENW&cc=us&lc=en
Standard Support
recommendation
HPE Proactive Care - 24x7 coverage, three year Support Service
HPE Proactive Care gives customers an enhanced call experience plus helps preventing problems and
maintains IT stability by utilizing personalized proactive reports with recommendations and advice when
your products are connected to Hewlett Packard Enterprise. This Service combines three years’ proactive
reporting and advice with our 24x7 coverage, four hour hardware response time when there is a problem. In
addition, this service includes collaborative software support for Independent Software Vendors (ISVs), (Red
Hat, VMWare, Microsoft, etc) running on your HPE servers.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf
Parts and Materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical
product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by Hewlett Packard Enterprise due to malfunction.
Related Services
HPE Server Hardware Installation
Provides for the basic hardware installation of HPE branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner.
https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf
Page 14
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
Data Center Care Services
HPE Datacenter Care helps improve IT stability and security, increase the value of IT, and enable agility and
innovation. It is a structured framework of repeatable, tested, and globally available services “building
blocks.” You can deploy, operate, and evolve your datacenter wherever you are on your IT journey. With
HPE Datacenter Care, you benefit from a personalized relationship with Hewlett Packard Enterprise via a
single point of accountability for HPE and others’ products. For more information, visit
http://www8.hp.com/us/en/business-services/it-services/datacenter-care-services.html
Data Privacy Services
Protect your data through better media management. HPE Data privacy services help manage and protect
sensitive data to reduce the risk of unauthorized access to private information and help meet compliance
requirements. Our retention services allow you to keep drives and other devices upon failure with Defective
Media Retention and Comprehensive Defective Material Retention, our removal services provide convenient
data sanitization and our recovery services allow you to safely retire IT assets and capture any remaining
value from the hardware.
http://www.hp.com/services/dataprivacy
HPE Education Services
Keep your IT staff trained making sure they have the right skills to deliver on your business outcomes. Book
on a class today and learn how to get the most from your technology investment.
For more information: http://www.hpe.com/services
Page 15
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options
section of this QuickSpecs.
NOTE: Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models. Any additional
options purchased will be shipped separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed.
NOTE: Not all models are available in all regions. Check with your local country Hewlett Packard Enterprise offices for
availability.
E5-2600 v4 series Processors
HPE ProLiant
Processor(s)
BL460c Gen9 E5- Cache Memory
2609v4 1P 16GBMemory
R Server
813192-B21
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
HPE ProLiant
Processor(s)
BL460c Gen9 E5- Cache Memory
2620v4 1P 16GBMemory
R Server
813193-B21
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
(1) Intel® Xeon® E5-2609 v4 (1.7GHz/8-core/20MB/6.4GT-s QPI/85W, DDR4-1866)
20MB (1x20MB) Level 3 cache
16GB (2x 8GB) 2400MT/s (DDR4-2400) Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
HPE FlexFabric 10Gb 2-port 536FLB FlexibleLOM
HPE Smart HBA H244br Controller with RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
(1) Intel® Xeon® E5-2620 v4 (2.1GHz/8-core/20MB/8GT-s QPI/85W, DDR4-2133)
20MB (1x20MB) Level 3 cache
16GB (2x 8GB) 2400MT/s (DDR4-2400) Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
HPE FlexFabric 10Gb 2-port 536FLB FlexibleLOM
HPE Smart HBA H244br Controller with RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Page 16
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Models
Management
Form Factor
Warranty
HPE ProLiant
Processor(s)
BL460c Gen9 E5- Cache Memory
2640v4 1P 32GBMemory
R Server
813194-B21
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
HPE ProLiant
Processor(s)
BL460c Gen9 E5- Cache Memory
2650v4 2P 64GBMemory
R Server
813195-B21
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
(1) Intel® Xeon® E5-2640 v4 (2.4GHz/10-core/25MB/8GT-s QPI/90W, DDR4-2133)
25MB (1x25MB) Level 3 cache
32GB (2x 16GB) 2400MT/s (DDR4-2400) Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots.
HPE FlexFabric 10Gb 2-port 536FLB FlexibleLOM
HPE Smart Array P244br Controller with RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
(2) Intel® Xeon® E5-2650 v4 (2.2GHz/12-core/30MB/9.6GT-s QPI/90W, DDR4-2400)
30MB (1x30MB) Level 3 cache
64GB (4x 16GB) 2400MT/s (DDR4-2400) Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots.
HPE FlexFabric 10Gb 2-port 536FLB FlexibleLOM
HPE Smart Array P244br Controller with RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
Page 17
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Models
HPE ProLiant
Processor(s)
BL460c Gen9 E52660v4 2P
Cache Memory
128GB-R Server Memory
813196-B21
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
HPE ProLiant
Processor(s)
BL460c Gen9 E52680v4 2P
Cache Memory
256GB-R Server Memory
813197-B21
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
(2) Intel® Xeon® E5-2660 v4 (2.0GHz/14-core/35MB/9.6GT-s QPI/105W, DDR42400)
35MB (1x35MB) Level 3 cache
128GB (4x 32GB) 2400MT/s (DDR4-2400) Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots.
HPE FlexFabric 20Gb 2-port 650FLB FlexibleLOM
HPE Smart Array P244br Controller with RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
(2) Intel® Xeon® E5-2680 v4 (2.4GHz/14-core/35MB/9.6GT-s QPI/120W, DDR42400)
35MB (1x35MB) Level 3 cache
256GB (8x 32GB) 2400MT/s (DDR4-2400) Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots.
HPE FlexFabric 20Gb 2-port 650FLB FlexibleLOM
HPE Smart Array P244br Controller with RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
E5-2600 v3 series Processors
NOTE: Optional: HPE OneView or HPE Insight Control
(1) Intel® Xeon® E5-2609 v3 (1.9GHz/6-core/15MB/6.4GT-s QPI/85W, DDR4-1600)
HPE ProLiant
Processor(s)
BL460c Gen9 E5- Cache Memory
15MB (1x15MB) Level 3 cache
2609v3 1P 16GB16GB (2x 8GB) PC4-2133P-R (DDR4-2133) Registered DIMMs at 1.2V)
Memory
R H244br Entry
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
Page 18
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Models
Server
727026-B21
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
HPE ProLiant
Processor(s)
BL460c Gen9 E52620v3 1P 16GB- Cache Memory
R H244br Entry Memory
Server
727027-B21
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
HPE ProLiant
Processor(s)
BL460c Gen9 E52640v3 1P 32GB- Cache Memory
R P244br Base
Memory
Server
727028-B21
Network Controller
Storage Controller
Hard Drive
Internal Storage
HPE FlexFabric 10Gb 2-port 536FLB FlexibleLOM
HPE Smart HBA H244br Controller with RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
(1) Intel® Xeon® E5-2620 v3 (2.40GHz/6-core/15MB/8.0GT-s QPI/85W, DDR4-1866,
HT, Turbo2)
15MB (1x15MB) Level 3 cache
16GB (2x 8GB) PC4-2133P-R (DDR4-2133) Registered DIMMS at 1.2V)
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
HPE FlexFabric 10Gb 2-port 536FLB FlexibleLOM
HPE Smart HBA H244br Controller with RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
(1) Intel® Xeon® E5-2640 v3 (2.6GHz/8-core/20MB/8.0GT-s QPI/95W, DDR4-1866,
HT, Turbo2)
20MB (1x20MB) Level 3 cache
32GB (2x 16GB) PC4-2133P-R (DDR4-1866 Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
HPE FlexFabric 10Gb 2-port 536FLB FlexibleLOM
HPE Smart Array P244br Controller with 1GB FBWC RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
Page 19
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Models
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
HPE ProLiant
Processor(s)
BL460c Gen9 E52650v3 1P 32GB- Cache Memory
R P244br Base
Memory
Server
727029-B21
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
HPE ProLiant
BL460c Gen9 E52660v3 2P 64GBR P244br
Performance
Server
727030-B21
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
(1) Intel® Xeon® E5-2650 v3 (2.3GHz/10-core/25MB/9.6GT-s QPI/105W, DDR42133, HT, Turbo2)
25MB (1x25MB) Level 3 cache
32GB (2x 16GB) PC4-2133P-R (DDR4-2133 Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
HPE FlexFabric 10Gb 2-port 536FLB FlexibleLOM
HPE Smart Array P244br Controller with 1GB FBWC RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year3-year Labor, 3-year on-site support.
(2) Intel® Xeon® E5-2660 v3 (2.6GHz/10-core/25MB/9.6GT-s QPI/105W, DDR42133, HT, Turbo2)
25MB (1x25MB) Level 3 cache
64GB (4x 16GB) PC4-2133P-R (DDR4-2133 Registered DIMMs at 1.2V)
NOTE: Total of 16 DIMM slots.
HPE FlexFabric 20Gb 2-port 650FLB FlexibleLOM
HPE Smart Array P244br Controller with 1GB FBWC RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Page 20
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Models
Warranty
HPE ProLiant
BL460c Gen9 E52670v3 2P
128GB-L P244br
Performance
Server
727031-B21
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
Expansion Slots
Management
Form Factor
Warranty
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year Parts, 3-year3-year Labor, 3-year on-site support.
(2) Intel® Xeon® E5-2670 v3 (2.3GHz/12-core/30MB/9.6GT-s QPI/120W, DDR42133, HT, Turbo2)
30MB (1x130MB) Level 3 cache
128GB (4x 32GB) PC4-2133P-L (DDR4-2133) Load Reduced DIMMs at 1. 2V)
NOTE: Total of 16 DIMM slots.
HPE FlexFabric 20Gb 2-port 650FLB FlexibleLOM
Smart Array P244br Controller with 1GB FBWC RAID 0,1
None ship standard
Supports up to two (2) HPE hot-plug SFF SAS/SATA/SDD drives
NOTE: NVMe SSDs not available on this model.
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 3.84TB; SATA SSD: 3.84TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and
Type B mezzanine cards.
HPE iLO Management (standard)
Optional: HPE OneView or HPE Insight Control
Up to eight (8) half-height blades supported in the HPE BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HPE BladeSystem c7000 Enclosure
Server warranty includes 3-year3-year Parts, 3-year Labor, 3-year on-site support.
Page 21
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO server).
To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an Hewlett Packard
Enterprise approved configurator. Contact your local sales representative for information on CTO product offerings and
requirements.
NOTE: Configure-to-order server blades must start with a CTO Blade Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard
drives ordered with the server.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HPE ProLiant BL460c Gen9 E5-v3 10Gb/20Gb FlexibleLOM Configure-to-order Blade Server
HPE ProLiant BL460c Gen9 E5-v4 10Gb/20Gb FlexibleLOM Configure-to-order Blade Server
727021-B21
813198-B21
Configurable Models ship with:
One (1) FlexibleLOM connector providing a choice for one (1) of the supported 10Gb/20Gb
FlexibleLOMs (see Step 2)
Two (2) HPE small form factor hot-plug SAS/SATA/ HDD or SSD hard drive bays
Two (2) x16 PCIe I/O expansion slots (one Type A, one Type A/B)
One (1) integrated USB connector and one (1) MicroSDHC connector
One (1) TPM connector
HPE iLO Management (standard)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HPE Processors
NOTE: All configure-to-order processor kits (i.e. xxxxxx-L21) contain one (1) processor.
NOTE: If two processors are desired, select one xxxxxx-L21 here in Step 2 and one xxxxxxB21 in Step 4.
E5-2600 v4 series Processors
HPE BL460c Gen9 Intel® Xeon® E5-2690v4 (2.6GHz/14-core/35MB/135W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2683v4 (2.1GHz/16-core/40MB/120W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2680v4 (2.4GHz/14-core/35MB/120W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2660v4 (2.0GHz/14-core/35MB/105W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2650v4 (2.2GHz/12-core/30MB/105W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2650Lv4 (1.7GHz/14-core/35MB/65W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2640v4 (2.4GHz/10-core/25MB/90W) FIO Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2630v4 (2.2GHz/10-core/25MB/85W) FIO Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2630Lv4 (1.8GHz/10-core/25MB/55W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2623v4 (2.6GHz/4-core/10MB/85W) FIO Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2620v4 (2.1GHz/8-core/20MB/85W) FIO Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2609v4 (1.7GHz/8-core/20MB/85W) FIO Processor Kit
819852-L21
819851-L21
819842-L21
819841-L21
819840-L21
819849-L21
819839-L21
819845-L21
819846-L21
819844-L21
819838-L21
819837-L21
Page 22
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
HPE BL460c Gen9 Intel® Xeon® E5-2603v4 (1.7GHz/6-core/15MB/85W) FIO Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2699v4 (2.2GHz/22-core/55MB/145W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2698v4 (2.2GHz/20-core/50MB/135W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2697v4 (2.3GHz/18-core/45MB/145W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2697Av4 (2.6GHz/16-core/40MB/145W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2695v4 (2.1GHz/18-core/45MB/120W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2667v4 (3.2GHz/8-core/25MB/135W) FIO Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2643v4 (3.4GHz/6-core/20MB/135W) FIO Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2637v4 (3.5GHz/4-core/15MB/135W) FIO Processor Kit
E5-2600 v3 series Processors
HP BL460c Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W) FIO Processor Kit
819843-L21
819856-L21
819855-L21
819854-L21
819857-L21
819853-L21
819850-L21
819848-L21
819847-L21
726987-L21
726988-L21
726989-L21
726990-L21
726991-L21
726992-L21
726993-L21
726994-L21
726995-L21
726996-L21
726997-L21
726999-L21
727000-L21
727001-L21
727002-L21
727003-L21
765268-L21
767049-L21
773123-L21
773124-L21
779795-L21
NOTE: All processors within the server must be identical.
NOTE: DIMM slots 4 and 5 are not accessible when the E5-2699 v4, E5-2697 v4, E52697A v4, E5-2667 v4, E5-2643 v4, E5-2637 v4, E5-2699 v3, the E5-2697 v3, the E52643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2 processor configuration, there
are twelve (12) total available DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above, please
reference the 'Memory Speed by Processor Model' table in the Memory section of the
QuickSpecs.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies
except the E5-2609 v4, E5-2603 v4, E5-2603 v3 and E5-2609 v3.
Page 23
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-2600 v3 and v4 Series, the letter preceding the
model number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a
Node, 6 is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE: The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must be
installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot
1). A processor must be installed in processor slot 2 for access to the second mezzanine
expansion slot (expansion slot 2).
NOTE: The letter "L" following the model number indicates denotes lower wattage.
HPE Memory
NOTE: HPE memory from previous generation servers (DDR3) is not compatible with this
server. HPE SmartMemory is required to realize the memory performance improvements
and enhanced functionality listed in this document for Gen9. For additional information,
please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within
a server.
NOTE: Depending on the memory configuration and processor model, the memory speed
may run at 2400MT/s, 2133MT/s, 1866MT/s, or 1600MT/s. Please see Memory
Population Table or the Online Memory Configuration Tool at:
https://h22195.www2.hpe.com/DDR4memoryconfig/Home/LEGAL
HPE SmartMemory
Registered DIMMs (RDIMMs) - E5-2600 v4 series Processors
HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
Load Reduced DIMMs (LRDIMMs) - E5-2600 v4 series Processors
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit
HPE 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit
HPE 128GB (1x128GB) Octal Rank x4 DDR4-2400 CAS-20-18-18 Load Reduced Memory
Kit
Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 48GB (1x16GB +1x32GB) DDR4-2133 CAS-15-15-15 Load Reduced Memory FIO Kit
HP 64GB (1x64GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
NOTE: For more information on ProLiant Energy Efficient Features, see:
http://h18000.www1.hp.com/products/servers/platforms/energyefficient/bridge.html
805347-B21
805349-B21
836220-B21
805351-B21
805353-B21
805358-B21
809208-B21
759934-B21
726718-B21
726719-B21
728629-B21
726722-B21
726720-B21
792278-B21
726724-B21
Page 24
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
HPE Networking
FlexibleLOM Adapters
NOTE: The server requires one (1) FlexibleLOM that is installed in the FlexibleLOM
connectors. All FlexibleLOMs are dual port: One port is routed to interconnect module bay 1
and the other to bay 2.
20Gb FlexibleLOM Adapters
HP FlexFabric 20Gb 2-port 630FLB FIO Adapter
HP FlexFabric 20Gb 2-port 650FLB FIO Adapter
10Gb FlexibleLOM Adapters
HP FlexFabric 10Gb 2-port 536FLB FIO Adapter
HP Ethernet 10Gb 2-port 560FLB FIO Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://www.hp.com/go/ProLiantNICs
700066-B21
700764-B21
766491-B21
684214-B21
Step 3: Choose Additional Factory Integration Options
HPE Insight
Software
HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server FIO
LTU
Converged
Infrastructure
Management
Software
HPE OneView with iLO Advanced - Server hardware required on same purchase order
HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU
HPE OneView for Blade Server including 3yr 24x7 Support FIO Bundle Physical 1-server LTU
HPE Storage
Controllers
HP Smart Array P244br/1GB FBWC 12Gb 2-ports Int FIO SAS Controller
HP Smart Array P246br/1GB FBWC 12Gb 4-ports Int FIO SAS Controller
HPE Smart Array P741m/2GB FBWC 12Gb 4-ports Ext Mezzanine SAS Controller
HP H244br 12Gb 2-ports Int FIO Smart Host Bus Adapter
HP FIO Enable Smart Array B140i Setting
HPE BL460c G9 Broadwell NVMe FIO Setting
NOTE: The HPE Gen9 Broadwell NVMe FIO Setting (825555-B21) is required to support
SFF NVMe SSDs within the system. This option is not compatible with the HPE Smart Array
P244br, HPE Smart Array P246br, or HPE Smart HBA H244br. Hewlett Packard Enterprise
recommends the use of a dual M.2 solid state drive kit for boot when using this option.
NOTE: The HPE Smart Array B140i Controller (chipset SATA) comes standard with the
HPE BL460c Gen9 10Gb/20Gb FLB CTO Blade (727021-B21). If neither the HPE Smart
Array P244br nor the HPE H244br controllers are chosen, a SATA cable will be provided to
support SATA devices for the two internal drives. If RAID is required when using the B140i,
please choose ‘HPE FIO B140i RAID Enable Kit - BIOS Setting’ (784308-B21).
NOTE: The HPE Smart Array P246br controller is only required when using a PCI expansion
blade or D2220sb storage blade with the BL460c Gen9.
C6N36A
E5Y35AAE
F6Q89A
761871-B21
749975-B21
726782-B21
761878-B21
784308-B21
825555-B21
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional options,
including server blade enclosures interconnect, mezzanine options and power subsystem options; please see the Core Options
and Additional sections below; or the following:
• HPE BladeSystem c3000 Enclosure QuickSpecs:
Page 25
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
•
•
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04128340.pdf
NOTE: The c3000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HPE BladeSystem c7000 Enclosure QuickSpecs:
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04128339.pdf
NOTE: The c7000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HPE BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html and
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For optimal cooling and system performance the BL460c Gen9 Server Blade requires the c7000 enclosure to be
configured with 10 fans and the c3000 enclosure to be configured with 6 fans.
Page 26
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
HPE Networking
NOTE: A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps when
connected to an interconnect module with 10Gb Ethernet downlinks.
NOTE: A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when connected to
an interconnect module with 1Gb Ethernet downlinks.
NOTE: The 10 Gigabit Ethernet adapters on each server blade connect to a 10Gb
interconnect in bays 3-6 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE
BladeSystem c3000 Enclosure).
20 Gigabit Ethernet Mezzanine Cards
HP FlexFabric 20Gb 2-port 630M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04312720
HP FlexFabric 20Gb 2-port 650M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04347342
10 Gigabit Ethernet Mezzanine Cards
HP FlexFabric 10Gb 2-port 534M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
http://www8.hp.com/us/en/products/iss-adapters/product-detail.html?oid=5404540
HP Ethernet 10Gb 2-port 560M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04111406.pdf
700076-B21
700767-B21
700748-B21
665246-B21
1 Gigabit Ethernet Mezzanine Cards
HP Ethernet 1Gb 4-port 366M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
https://www.hpe.com/h20195/v2/getpdf.aspx/c04111456.pdf?ver=10
615729-B21
FlexibleLOM Adapters
NOTE: The server supports one (1) FlexibleLOM that is installed in the FlexibleLOM
connectors and is already included in the pre-configured models. However, it must be
added in Step 2 for Configure-to-Order Models. The FlexibleLOM options below are used
to change these original FlexibleLOMs.
20Gb FlexibleLOM Adapters
HP FlexFabric 20Gb 2-port 630FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04312719
HP FlexFabric 20Gb 2-port 650FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04347341
700065-B21
10Gb FlexibleLOM Adapters
HP FlexFabric 10Gb 2-port 536FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04347246
HP Ethernet 10Gb 2-port 560FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
700763-B21
766490-B21
655639-B21
Page 27
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04111516.pdf
HPE Infiniband Mezzanine Adapters
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active
(regardless of operating mode). When installed in mezzanine slot 2, both ports are active.
NOTE: InfiniBand QDR and FDR speeds are only supported on the HPE BladeSystem
c7000 Enclosure. For additional information, please see the HPE BladeSystem c7000
Enclosure and InfiniBand QuickSpecs at:
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04128339.pdf
https://www.hpe.com/h20195/v2/getpdf.aspx/c04126044.pdf?ver=26
HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter
NOTE: The QDR InfiniBand adapter may be installed in either mezzanine slot of the
server.
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode
and may be installed in either mezzanine slot if operated in any other mode.
HP InfiniBand FDR 2-port 545M Adapter
HPE Fibre Channel HP LPe1605 16Gb Fibre Channel HBA for BladeSystem c-Class
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/getpdf.aspx/c04315132.pdf?ver=2
HP QMH2672 16Gb Fibre Channel Host Bus Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04126962
HP LPe1205A 8Gb Fibre Channel Host Bus Adapter for BladeSystem c-Class
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04163733
HPE Processors
E5-2600 v4 series Processors
HPE BL460c Gen9 Intel® Xeon® E5-2690v4 (2.6GHz/14-core/35MB/135W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2683v4 (2.1GHz/16-core/40MB/120W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2680v4 (2.4GHz/14-core/35MB/120W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2660v4 (2.0GHz/14-core/35MB/105W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2650v4 (2.2GHz/12-core/30MB/105W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2650Lv4 (1.7GHz/14-core/35MB/65W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2640v4 (2.4GHz/10-core/25MB/90W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2630v4 (2.2GHz/10-core/25MB/85W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2630Lv4 (1.8GHz/10-core/25MB/55W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2623v4 (2.6GHz/4-core/10MB/85W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2620v4 (2.1GHz/8-core/20MB/85W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2609v4 (1.7GHz/8-core/20MB/85W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2603v4 (1.7GHz/6-core/15MB/85W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2699v4 (2.2GHz/22-core/55MB/145W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2698v4 (2.2GHz/20-core/50MB/135W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2697v4 (2.3GHz/18-core/45MB/145W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2697Av4 (2.6GHz/16-core/40MB/145W) Processor
764282-B21
764283-B21
702213-B21
718203-B21
710608-B21
659818-B21
819852-B21
819851-B21
819842-B21
819841-B21
819840-B21
819849-B21
819839-B21
819845-B21
819846-B21
819844-B21
819838-B21
819837-B21
819843-B21
819856-B21
819855-B21
819854-B21
819857-B21
Page 28
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2695v4 (2.1GHz/18-core/45MB/120W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2667v4 (3.2GHz/8-core/25MB/135W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2643v4 (3.4GHz/6-core/20MB/135W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2637v4 (3.5GHz/4-core/15MB/135W) Processor Kit
E5-2600 v3 series Processors
HP BL460c Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W) Processor Kit
NOTE: All processors within the server must be identical.
NOTE: DIMM slots 4 and 5 are not accessible when the E5-2699 v4, E5-2697 v4, E52697A v4, E5-2667 v4, E5-2643 v4, E5-2637 v4, E5-2699 v3, the E5-2697 v3, the E52643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2 processor configuration, there
are twelve (12) total available DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above,
please reference the 'Memory Speed by Processor Model' table in the Memory section of
the QuickSpecs.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost
Technologies except the E5-2609 v4, E5-2603 v4, E5-2603 v3 and E5-2609 v3.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-2600 v3 and v4 Series, the letter preceding the
model number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a
Node, 6 is socket/segment designation, 00 = Processor SKU, and x = L for low power
SKUs.
NOTE: The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must
be installed in processor slot 1 for access to the first mezzanine expansion slot (expansion
slot 1). A processor must be installed in processor slot 2 for access to the second
mezzanine expansion slot (expansion slot 2).
819853-B21
819850-B21
819848-B21
819847-B21
726987-B21
726988-B21
726989-B21
726990-B21
726991-B21
726992-B21
726993-B21
726994-B21
726995-B21
726996-B21
726997-B21
726999-B21
727000-B21
727001-B21
727002-B21
727003-B21
765268-B21
767049-B21
773123-B21
773124-B21
779795-B21
Page 29
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
NOTE: The letter "L" following the model number indicates denotes lower wattage.
HPE Memory
NOTE: HPE memory from previous generation servers (DDR3) is not compatible with this
server. HPE SmartMemory is required to realize the memory performance improvements
and enhanced functionality listed in this document for Gen9. For additional information,
please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed
within a server.
NOTE: Depending on the memory configuration and processor model, the memory speed
may run at 2400MT/s, 2133MT/s, 1866MT/s, or 1600MT/s. Please see Memory
Population Table or the Online Memory Configuration Tool at:
https://h22195.www2.hpe.com/DDR4memoryconfig/Home/LEGAL
HPE SmartMemory
Registered DIMMs (RDIMMs) - E5-2600 v4 series Processors
HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
Load Reduced DIMMs (LRDIMMs) - E5-2600 v4 series Processors
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit
HPE 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory
Kit
HPE 128GB (1x128GB) Octal Rank x4 DDR4-2400 CAS-20-18-18 Load Reduced Memory
Kit
HPE Solid State
M.2 SATA Drives
805347-B21
805349-B21
836220-B21
805351-B21
805353-B21
805358-B21
809208-B21
Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
759934-B21
726718-B21
726719-B21
728629-B21
Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 48GB (1x16GB +1x32GB) DDR4-2133 CAS-15-15-15 Load Reduced Memory FIO Kit
HP 64GB (1x64GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
726722-B21
726720-B21
792278-B21
726724-B21
NOTE: The solid state M.2 SATA drives plug directly into a connector on the system
board and do not use a SFF drive cage slot.
NOTE: RAID 1, 0 are provided through the B140i in UEFI BIOS mode only.
HP 64GB Value Endurance Solid State M.2 Enablement Kit for ProLiant Blades
HP Dual 64GB Value Endurance Solid State M.2 Enablement Kit for ProLiant Blades
HPE 120GB Read Intensive-1 Solid State Drive M.2 Kit for ProLiant Blades
HPE Dual 120GB Read Intensive-1 Solid State Drive M.2 Kit for ProLiant Blades
785233-B21
775588-B21
846495-B21
846497-B21
Page 30
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
HPE Hard Drives
NOTE: The ProLiant BL460c Gen9 server includes the HPE hot-plug small form factor
(SFF) SmartDrive carrier for enhanced management and reduced maintenance errors.
HPE drives from generation G7 servers and before are not compatible with the BL460c
Gen9 drive bays.
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server,
but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives
types is not supported.
NOTE: HPE hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE: The hard drive options are not required when configuring a drive-less model.
HPE NVMe PCIe Read Intensive SFF (2.5-inch) Solid State Drives
HP 2TB NVMe PCIe Read Intensive SFF 2.5-in SC2 3yr Wty Solid State Drive
HP 1.2TB NVMe PCIe Read Intensive SFF 2.5-in SC2 3yr Wty Solid State Drive
HP 400GB NVMe PCIe Read Intensive SFF 2.5-in SC2 3yr Wty Solid State Drive
764908-B21
764906-B21
764904-B21
HPE NVMe PCIe Mixed Use SFF (2.5-inch) Solid State Drives
HP 2TB NVMe PCIe Mixed Use SFF 2.5-in SC2 3yr Wty Solid State Drive
HP 1.6TB NVMe PCIe Mixed Use SFF 2.5-in SC2 3yr Wty Solid State Drive
HP 800GB NVMe PCIe Mixed Use SFF 2.5-in SC2 3yr Wty Solid State Drive
HP 400GB NVMe PCIe Mixed Use SFF 2.5-in SC2 3yr Wty Solid State Drive
765044-B21
765038-B21
765036-B21
765034-B21
HPE NVMe PCIe Write Intensive SFF (2.5-inch) Solid State Drives
HP 1.6TB NVMe PCIe Write Intensive SFF 2.5-in SC2 3yr Wty Solid State Drive
HP 800GB NVMe PCIe Write Intensive SFF 2.5-in SC2 3yr Wty Solid State Drive
HP 400GB NVMe PCIe Write Intensive SFF 2.5-in SC2 3yr Wty Solid State Drive
NOTE: The HPE Gen9 Broadwell NVMe FIO Setting (825555-B21) is required to support
SFF NVMe SSDs within the system. This option is not compatible with the HPE Smart
Array P244br, HPE Smart Array P246br, or HPE Smart HBA H244br. Hewlett Packard
Enterprise recommends the use of a dual M.2 solid state drive kit for boot when using this
option.
NOTE: Hewlett Packard Enterprise has qualified the NVMe drive portfolio using the
Operating System inbox drivers, full detail on the Solid State Drive QuickSpecs:
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04154378
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
HPE 3.84TB SATA 6G RI SFF SC DS SSD
HPE 1.92TB SATA 6G RI SFF SC DS SSD
HPE 1.92TB 6G SATA Read Intensive SFF (2.5in) SC 1yr Warranty Solid State Drive
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
HPE 960GB SATA 6G RI SFF SC DS SSD
HPE 960GB 6G SATA Read Intensive SFF (2.5in) SC 1yr Warranty Solid State Drive
HPE 480GB SATA 6G RI SFF SC DS SSD
HPE 480GB SATA 6G RI SFF SC SSD
HPE 240GB SATA 6G RI SFF SC DS SSD
HPE 240GB SATA 6G RI SFF SC SSD
764892-B21
736939-B21
736936-B21
868830-B21
868826-B21
871770-B21
655710-B21
868822-B21
871768-B21
868818-B21
872855-B21
868814-B21
872853-B21
12G SAS (2.5-inch) 512e SC HDD
Page 31
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC 512e Enterprise 3yr Warranty Hard Drive
HP 1TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
HP 1.8TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 512e 3yr Warranty Hard Drive
HP 2TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
748387-B21
765464-B21
791034-B21
765466-B21
12G SAS (2.5-inch) SFF MDL SC HDD
HPE 1TB 12G SAS 7.2K rpm SFF (2.5in) SC Midline 1yr Warranty Hard Drive
832514-B21
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
718162-B21
652589-B21
652583-B21
652572-B21
652564-B21
652611-B21
652605-B21
SAS Hot Plug SmartDrive SFF (2.5-inch) Midline Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
652749-B21
6G SATA (2.5-inch) 512e SC HDD
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
HP 2TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
765453-B21
765455-B21
12G SAS Write Intensive SFF (2.5-inch) SC Solid State Drive
HP 200GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
HP 400GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
HP 800GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
HP 1.92TB 12G SAS Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 800GB 12G SAS Write Intensive-1 SFF (2.5in) SC 3yr Wty Solid State Drive
HPE 1.6TB 12G SAS Write Intensive-1 SFF (2.5in) SC 3yr Wty Solid State Drive
802578-B21
802582-B21
802586-B21
802891-B21
846430-B21
846432-B21
12G SAS Mixed Use SFF (2.5-inch) SC Solid State Drive
HPE 800GB 12G SAS Mixed Use-1 SFF (2.5in) SC 3yr Wty Solid State Drive
HPE 1.6TB 12G SAS Mixed Use-1 SFF (2.5in) SC 3yr Wty Solid State Drive
846434-B21
846436-B21
12G SAS SFF (2.5-inch) SC 3yr Wty H2 Drive
HP 1.2TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 900GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
781518-B21
785069-B21
781516-B21
785067-B21
6G SATA Value Endurance SFF (2.5-inch) SC Enterprise Value M1 Solid State Drives
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
764923-B21
764925-B21
Page 32
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
HP 800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid
State Drive
764927-B21
764929-B21
6G SATA 2.5in WI-PLP SC SSD
HP 1.2TB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 800GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 400GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 200GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804677-B21
804671-B21
804665-B21
804639-B21
6G SATA 2.5in MU-PLP SC SSD
HP 1.6TB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 800GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 480GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 200GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804631-B21
804625-B21
832414-B21
804613-B21
6G SATA 2.5in RI-PLP SC SSD
HP 1.6TB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 800GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 480GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 240GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 120GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 80GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804605-B21
804599-B21
804593-B21
804587-B21
804581-B21
804575-B21
12G SAS ME SFF (2.5-inch) SC Enterprise Mainstream H2 Solid State Drives
HP 1.6TB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2 Solid
State Drive
HP 200GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2
Solid State Drive
HP 400GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2
Solid State Drive
HP 800GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2
Solid State Drive
12G SAS VE SFF (2.5-inch) SC EV Solid State Drives
HP 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
HP 800GB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
6G SATA Hot Plug MU-3 SFF (2.5-inch) SC Solid State Drives
HP 1.92TB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 960GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 480GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
779176-B21
779164-B21
779168-B21
779172-B21
762263-B21
762261-B21
817011-B21
816995-B21
816985-B21
6G SATA Hot Plug RI SFF (2.5-inch) SC Solid State Drives
Page 33
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
HP 3.84TB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HP 960GB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 120GB 6G SATA Read Intensive-1 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 240GB 6G SATA Read Intensive-1 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 480GB 6G SATA Read Intensive-1 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 960GB 6G SATA Read Intensive-1 SFF 2.5-in SC 3yr Wty Solid State Drive
HPE 1.92TB 6G SATA Read Intensive-1 SFF 2.5-in SC 3yr Wty Solid State Drive
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server,
but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives
types is not supported
816929-B21
816909-B21
838404-B21
838406-B21
838408-B21
838410-B21
838412-B21
759208-B21
759210-B21
759212-B21
Page 34
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Additional Options
HPE Insight
software
HPE Insight Control
HPE Insight Control including 1yr 24x7 Technical Support and Updates 1-server LTU
HPE Insight Control including 1yr 24x7 TSU E-LTU
HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO E-LTU
HPE Insight Management Media Kit
NOTE: HPE Insight Management Media Kit contains DVDs without licenses. Contains HPE
Systems Insight Manager, HPE Insight Control, HPE Matrix Operating Environment, and
Virtual Connect Enterprise Manager software. Uses an integrated installer to perform
quick and accurate software installation and updates.
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses
with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one year of 24 x
7 HPE Software Technical Support Service.
NOTE: Licenses ship without media. The HPE Insight Management Media Kit can be
ordered separately, or can be downloaded at
https://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNumb
er=IMDVD
NOTE: For additional license kits, please see the QuickSpecs at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123391
HPE iLO
HPE Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Advanced License Management
HPE iLO Advanced for BladeSystem including 3yr 24x7 Technical Support and Updates ELTU
HPE iLO Advanced for BladeSystem including 3yr 24x7 Tech Support and Updates 1-server
LTU
HPE iLO Advanced for BladeSystem including 1yr 24x7 Technical Support and Updates ELTU
HPE iLO Advanced for BladeSystem including 1yr 24x7 Support 1-server LTU
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one or three
years of 24 x 7 HPE Software Technical Support Service.
NOTE: For additional license kits, including electronic delivery options, please see the iLO
QuickSpecs at https://www.hpe.com/us/en/servers/integrated-lights-out-ilo.html
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one or three year
of 24 x 7 HPE Software Technical Support Service.
NOTE: For additional license kits, please see the QuickSpecs at:
http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c04951959
Converged
Infrastructure
Management
Software
HPE OneView
HPE OneView with iLO Advanced
HPE OneView including 3yr 24x7 Support Physical 1-server LTU
HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU
HPE OneView Physical Media Kit LTU
C6N27A
C6N28ABE
C6N36ABE
C6N31A
E6U63ABE
BD502A
E6U60ABE
512488-B21
E5Y34A
E5Y35AAE
E5Y37A
Page 35
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Additional Options
HPE OneView w/o iLO including 3yr 24x7 Support 1-server LTU
HPE OneView w/o iLO including 3yr 24x7 Support Flexible Quantity E-LTU
HPE OneView w/o iLO including 3yr 24x7 Support 1-server FIO LTU
NOTE: For additional license kits please see the QuickSpecs at
http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c04951959
High Performance HPE Cluster Management Utility
Clusters
HPE Insight Cluster Management Utility 1yr 24x7 Flexible LTU
HPE Insight Cluster Management Utility 3yr 24x7 Flexible LTU
NOTE: These part numbers can be used to purchase one certificate for multiple licenses
and support with a single activation key. Each license is for one node (server). Customer
will receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in order to
obtain a license key. Customer also will receive a support agreement.
HPE Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs at
http://www8.hp.com/us/en/products/server-software/productdetail.html?oid=3296361
P8B24A
P8B26AAE
P8B31A
QL803B
BD476A
BD477A
HPE I/O
Accelerator
Options
NOTE: HPE I/O Accelerator cards can be used in legacy BIOS mode only.
HPE 1.2TB Read Intensive Mezzanine PCIe Workload Accelerator for BladeSystem c-Class
HPE 1.6TB Read Intensive Mezzanine PCIe Workload Accelerator for BladeSystem c-Class
HPE Security
HP Trusted Platform Module Option
HP Trusted Platform Module 2.0 Kit
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely
store artifacts used to authenticate the server platform. These artifacts can include
passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption
(BitLocker) is a data protection feature available in Windows Server® 2008 R2 and 2012.
BitLocker leverages the enhanced security capabilities of a Trusted Platform Module
(TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure
that a server running Windows Server 2008 R2 and 2012 has not been tampered with
while the system was offline.
NOTE: For more information about TPM, including a white paper, go to
https://www.hpe.com/h20195/v2/getpdf.aspx/4AA5-4782ENW.pdf
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
488069-B21
745823-B21
HPE Storage
Controllers
HP Smart Array P244br/1GB FBWC 12Gb 2-ports Int SAS Controller
HP H244br 12Gb 2-ports Int Smart Host Bus Adapter
HP Smart Array P246br/1GB FBWC 12Gb 4-ports Int SAS Controller
HPE BL460c G9 Broadwell NVMe FIO Setting
NOTE: The HPE Gen9 Broadwell NVMe FIO Setting (825555-B21) is required to support
SFF NVMe SSDs within the system. This option is not compatible with the HPE Smart
Array P244br, HPE Smart Array P246br, or HPE Smart HBA H244br. HPE recommends
recommends the use of a dual M.2 solid state drive kit for boot when using this option.
NOTE: The HPE Smart Array B140i Controller (chipset SATA) comes standard with the
749680-B21
726809-B21
726793-B21
825555-B21
794603-B21
794605-B21
Page 36
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Additional Options
HPE BL460c Gen9 10Gb/20Gb FLB CTO Blade (727021-B21). If neither the HPE Smart
Array P244br nor the HPE H244br controllers are chosen, a SATA cable will be provided
to support SATA devices for the two internal drives. If RAID is required when using the
B140i, please choose ‘HPE FIO B140i RAID Enable Kit - BIOS Setting’ (784308-B21).
NOTE: The HPE Smart Array P246br controller is only required when using a PCI
expansion blade or D2220sb storage blade with the BL460c Gen9.
HPE Secure
Encryption
HP Secure Encryption per Svr Entitlement
NOTE: HPE Secure Encryption is supported on the HPE Smart Array P244br and H244br
(running in RAID mode) as an option. HPE Secure Encryption licensing is based on the
number of physical drives requiring encryption.
NOTE: For more information about HPE Secure Encryption, go to
http://www8.hp.com/us/en/products/server-software/productdetail.html?oid=6532260
HPE InfiniBand
Mezzanine
Adapters
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active
(regardless of operating mode). When installed in any other mezzanine slot, both ports
are active.
NOTE: InfiniBand QDR and FDR speeds are only supported on the HPE BladeSystem
c7000 Enclosure. For additional information, please see the HPE BladeSystem c7000
Enclosure and InfiniBand QuickSpecs at:
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04128339.pdf
https://www.hpe.com/h20195/v2/getpdf.aspx/c04126044.pdf?ver=26
HP InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter
NOTE: The QDR InfiniBand adapter may be installed in any mezzanine slot of the server.
HP InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode
and may be installed in any mezzanine slot if operated in any other mode.
HP InfiniBand FDR 2-port 545M Adapter
HPE Flash Media
Kits for USB
Drives
HPE Flash Media Kits for USB Drives
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HPE 8GB microSD Enterprise Mainstream Flash Media Kit
HPE 32GB microSD Mainstream Flash Media Kit
HP Dual 8GB microSD Enterprise Midline USB Kit
HPE Care Pack
Services
Proactive Care Services
HPE 3 year Proactive Care 24x7 BL4xxc Gen9 Service
HPE 3 year Proactive Care 24x7 with DMR BL4xxc Gen9 Service
HPE 3 year Proactive Care Advanced 24x7 BL4xxc Gen9 Service
HPE 3 year Proactive Care Advanced 24x7 with DMR BL4xxc Gen9 Service
Installation Services
HPE Install c-Class Server Blade Service
NOTE: Additional HPE Care Pack services can be found at:
C9A82AAE
764282-B21
764283-B21
702213-B21
737953-B21
726116-B21
700139-B21
741279-B21
U7BN8E
U7BN9E
U7BT6E
U7CF8E
UE493E
Page 37
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Additional Options
http://www8.hp.com/us/en/business-services/itservices.html?compURI=1077422#.V9HL_fkrKCg
Page 38
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Memory
For detailed memory configuration rules and guidelines, please use the Online DDR4 Memory Configuration Tool:
https://h22195.www2.hpe.com/DDR4memoryconfig/Home/LEGAL
Memory Subsystem Architecture
Each Intel® Xeon® E5-2600 v3 family or Intel® Xeon® E5-2600 v3 family processor socket contains four memory channels that
support two DIMMs each for a total of eight (8) DIMM per installed processor or a grand total of sixteen (16) DIMMs for the server.
Up to 64GB capacity DIMMs are supported for 1TB of memory (16 DIMM slots x 64GB per DIMM).
Memory Population Rules and Guidelines:
• A minimum of one DIMM is required per processor.
• Install DIMMs only if the corresponding processor is installed.
• If only one processor is installed in a two processor system, only half of the DIMM slots are available.
• DIMM sizes can be mixed in channel. To maximize performance, it is recommended to balance the total memory capacity
between all installed processors and to load the channels similarly whenever possible.
• LRDIMM and RDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant
Gen9 servers support RDIMM and LRDIMM.
• DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
• The maximum memory speed is a function of the memory type, memory configuration, and processor model.
• The maximum memory capacity is a function of the memory type and number of installed processors.
• HPE memory from previous generation servers is not compatible with the BL460c Gen9 Server Blade.
• To realize the performance memory capabilities listed in this document, HPE SmartMemory is required. For additional
information, please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535
Supported Memory Bandwidth on Intel® Xeon® E5-2600 v3 series Processors
DIMM
Rank
Register DIMM (RDIMM)
Dual Rank (2R)
Single Rank
(1R)
8GB
16GB
Std Voltage
1.2V
Std Voltage
1.2V
12 slot
servers
16 slot
servers
12
12
16
16
12 slot
servers
16 slot
servers
96
192
128
256
2133
2133
2133
2133
DIMM
Capacity
Voltage
1 DIMM
Per
Channel
2 DIMM
Per
Channel
8GB
Load Reduced (LRDIMM)
Dual Rank (2R)
Quad Rank (4R)
32GB
16GB
32GB
64GB
Std Voltage
1.2V
Std Voltage
1.2V
12
NA
16
16
16
192
384
NA
256
512
1024
2133
2133
2133
2133
2133
2133
Std Voltage
Std Voltage
Std Voltage
1.2V
1.2V
1.2V
SLOTS THAT CAN BE POPULATED
12
12
12
16
16
MAXIMUM CAPACITY (GB)*
96
384
128
512
POPULATED DIMM SPEED (MT/s)
2133
2133
2133
2133
Page 39
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Memory
*Maximum Capacity will vary based on individual server platform qualification schedule
Memory Speed by E5-2600 v3 Series Processor Model
Processor Models
E5-2690 v3, E5-2695 v3, E5-2697 v3, E5-2698 v3, E5-2699 v3, E5-2687W v3, E5-2683 v3, E5-2680 v3,
E5-2670 v3, E5-2667 v3 , E5-2660 v3, E5-2650 v3, E5-2650L, E5-2643 v3, E5-2637 v3
E5-2640 v3, E5-2630 v3, E5-2630L v3, E5-2623 v3, E5-2620 v3
E5-2609 v3, E5-2603 v3
Supported
Memory Speeds
2133MT/s
1866MT/s
1600MT/s
Standard and Maximum Memory Capacity (Pre-configured Models) for E5-2600 v3 Series
Pre Configured Models
Standard Memory
Maximum Memory Plus
Optional Memory
Standard Memory Replaced with
Optional Memory
Intel Xeon E5-2670 v3
128GB
(4x 32GB)
64GB
(4x 16GB)
32GB
(2x 16GB)
16GB
(2x 8GB)
896GB
(4x 32GB + 12x 64GB)
448GB
(4x 16GB + 12x 32GB)
480GB
(2x 16GB + 14x 32GB)
240GB
(2x 8GB + 14x 16GB)
1TB
(16x 64GB)
1TB
(16x 64GB)
1TB
(16x 64GB)
1TB
(16x 64GB)
Intel Xeon E5-2660 v3
Intel Xeon E5-2650 v3, E52640 v3
Intel Xeon E5-2620 v3, E52609 v3
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
• 2GB = 2,048MB
• 4GB = 4,096MB
• 8GB = 8,192MB
• 16GB = 16,384MB
• 32GB = 32,768MB
Supported Memory Bandwidth on Intel® Xeon® E5-2600 v4 series Processors
Register DIMM (RDIMM)
Load Reduced (LRDIMM)
DIMM
Single Rank (1R)
Dual Rank (2R)
Dual Rank (2R)
Quad Rank (4R)
Rank
DIMM
8GB
16GB
16GB
32GB
32GB
64GB
Capacity
Voltage
Std Voltage
Std Voltage
Std Voltage
Std Voltage
Std Voltage
Std Voltage 1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
SLOTS THAT CAN BE POPULATED
12 slot
12
12
12
12
12
12
servers
16 slot
16
16
16
16
16
16
servers
MAXIMUM CAPACITY (GB)*
12 slot
96
192
192
384
384
768
servers
16 slot
128
256
256
512
512
1024
servers
POPULATED DIMM SPEED (MT/s)
1 DIMM
2400
2400
2400
2400
2400
2400
Per
Channel
2 DIMM
2133
2133
2133
2133
2400
2400
Per
Page 40
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Memory
Channel
*Maximum Capacity will vary based on individual serve platform qualification schedule
Page 41
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Memory
Memory options part number decoder
Item
Description
Definition
1
Capacity
8 GByte
16 GByte
32 GByte
2
Rank
1R = Single-rank
2R = Dual-rank
4R = Quad-rank
3
Data width
x4 = 4-bit
x8 = 8-bit
4
Memory generation
DDR4
5
Max. Memory speed
2133MT/s
6
CasLatency
P = 15
6
DIMM type
R = RDIMM (registered)
L = LRDIMM (load reduced)
Following are memory options available from Hewlett Packard Enterprise:
HPE Memory
NOTE: HPE memory from previous generation servers (DDR3) is not compatible with this
server. HPE SmartMemory is required to realize the memory performance improvements
and enhanced functionality listed in this document for Gen9. For additional information,
please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/us/en/servers/memory.html
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed
within a server.
NOTE: Depending on the memory configuration and processor model, the memory speed
may run at 2400MT/s, 2133MT/s, 1866MT/s, or 1600MT/s.
Registered DIMMs (RDIMMs) - E5-2600 v4 series Processors
HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit
805347-B21
HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
805349-B21
Page 42
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Memory
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
836220-B21
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
805351-B21
Load Reduced DIMMs (LRDIMMs) - E5-2600 v4 series Processors
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit
805353-B21
HPE 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory
Kit
805358-B21
Registered DIMMs (RDIMMs)
Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors
HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
759934-B21
726718-B21
726719-B21
728629-B21
Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors
HP 48GB (1x16GB +1x32GB) DDR4-2133 CAS-15-15-15 Load Reduced Memory FIO Kit
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
HP 64GB (1x64GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
792278-B21
726722-B21
726720-B21
726724-B21
Page 43
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Storage
1-2
2 x SFF hot-plug SAS, SATA, SAS SDD, and SATA SSD hard drives
Page 44
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Technical Specifications
System Unit
Dimensions
(H x W x D)
(with bezel)
7.11 x 2.18 x 20.37 in (18.07 x 5.54 x 51.76 cm)
Weight
(approximate)
Maximum: all processors, 16
DIMMs, hard drives,
mezzanine cards, and two
flash cache batteries installed)
Minimum: one processor and
2 DIMMs installed
14.00 lb (6.33 kg)
10.50 lb (4.75 kg)
Power Specifications For power specifications including input requirements, BTU rating, and power supply
output, please see the:
• HPE BladeSystem c3000 Enclosure QuickSpecs at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04123
379
• HPE BladeSystem c7000 Enclosure QuickSpecs at
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04229580
To review typical system power ratings use the HPE Power Advisor which is available
via the online tool located at https://paonline56.itcs.hpe.com.
NOTE: For optimal cooling and system performance the BL460c Gen9 Server Blade
requires the c7000 enclosure to be configured with 10 fans and the c3000 enclosure
to be configured with 6 fans.
System Inlet
Temperature
Operating
10° to 35°C (50° to 95°F) at sea level with an altitude
derating of 1.0°C per every 305 m (1.8°F per every
1,000 ft) above sea level to a maximum of 3,050 m
(10,000 ft), no direct sustained sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The
upper limit may be limited by the type and number of
options installed.
Non-operating
Extended Ambient
Operating Support
Relative Humidity
(non-condensing)
System performance may be reduced if operating with a
fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of change
is 20°C/hr (36°F/hr).
For Approved hardware configurations, the supported system inlet range is extended
to be:
5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude
derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a
maximum of 3050 m (10,000 ft)
NOTE: Qualifications for extended ambient configurations are detailed at:
https://h20566.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=7271259&do
cId=emr_na-c04513664&docLocale=en_US
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-condensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-condensing.
Page 45
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Technical Specifications
Altitude
Operating
Non-operating
Acoustic Noise
3,050 m (10,000 ft). This value may be limited by the
type and number of options installed. Maximum
allowable altitude change rate is 457 m/min (1,500
ft/min).
9,144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1,500 ft/min).
For acoustic noise specifications, please see the HPE BladeSystem c-Class Enclosures
QuickSpecs located at:
• HPE BladeSystem c3000 Enclosure QuickSpecs:
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04128340.pdf
• HPE BladeSystem c7000 Enclosure QuickSpecs:
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04128339.pdf
HPE Smart Array Disk Drive Interface
P244br Controller
Server Interface
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
RAID Support
Other
12Gb/s SAS (Serial Attached SCSI)
6Gb/s SATA (Serial ATA)
x8 PCIe 3.0 provides 8GB/s maximum bandwidth
1GB flash backed write cache (FBWC) cache standard
64 (with included 1GB cache)
HPE Smart HBA Disk Drive Interface
H244br Controller
Server Interface
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
RAID Support
Other
12Gb/s SAS (Serial Attached SCSI)
6Gb/s SATA (Serial ATA)
x8 PCIe 3.0 provides 8GB/s maximum bandwidth
None
64
HPE Dynamic
Disk Drive Interface
Smart Array B140i Server Interface
Controller
SAS Connectors
Cache Memory
SAS Speed
Logical Drives
Supported
Host Memory
Addressing
6Gb/s SATA (Serial ATA)
Embedded x4 PCIe 2.0
2 internal SATA ports
None
6Gb/s SATA links
Up to 10 logical volumes (2 physical drives)
64-bit, supporting servers memory space greater than 4GB
RAID 1 (mirroring), RAID 0 (striping), RAID 10
Upgradeable firmware with recovery ROM
Online drive flash (with SAS drives)
64-bit, supporting servers memory space greater than 4GB
RAID 1 (mirroring) and RAID 0 (striping)
Upgradeable firmware with recovery ROM
Online drive flash (with SAS drives)
64-bit, supporting greater than 4GB server memory space
Page 46
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Technical Specifications
Hot Plug Support
RAID Support
Other
HPE FlexFabric
10Gb
2-port 536FLB
FlexibleLOM
Type
Network Processor
Data Transfer
Method
Network Transfer
Rate
IEEE Compliance
Standard Features
HPE FlexFabric
20Gb
2-port 650FLB
FlexibleLOM
Yes
RAID 1 (Mirroring)
RAID 0 (Striping)
Upgradeable firmware with recovery ROM
Integrated dual-port KR 10Gb FlexibleLOM with FlexFabric (Flex-10, FCoE, hardwarebased iSCSI, iSCSI boot, TCP/IP offload engine, and autosensing 1Gb/10Gb Ethernet
capability)
QLogic 57840S with integrated MAC/PHY
x8 PCI Express 3.0
Two ports, each at 20Gbps full duplex; 40Gbps aggregate full duplex theoretical
bandwidth
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb or 10Gb
HPE BladeSystem c-Class interconnect components. Both ports will operate at the
same speed.
NOTE: Each port on the 536FLB adapter transmits from the server at 20Gbps
(theoretical) full duplex.
802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4) and 802.3x
Full hardware offload of iSCSI and FCoE storage protocol processing for highest
performance
converged Ethernet data and storage networks.
Dual-port 10GbE Flex-10 FlexibleLOM network adapter that provides the flexibility to
choose the
type of LOM to meet growing infrastructure needs
Industry-leading throughput and latency performance
Supports the HPE Flex-10 blade interconnect technology
User configurable bandwidth settings when combined with the 10Gb Flex-10 Virtual
Connect
module. From 100Mb/s to10Gb/s on up to four "Physical Function" NICs per port, in
increments of
100Mb/s for NIC. The combined bandwidth of NICs cannot exceed port bandwidth i.e.
10 Gb.
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE)
Improved small packet performance
Support for Preboot eXecution Environment (PXE)
Integrated PHY and MAC
Supports for SR-IOV
Support for Network Partitioning (NPAR)
Type
Integrated dual-port KR2 20Gb FlexibleLOM with FlexFabric (Flex-20, FCoE, RoCE,
Tunnel Offload with VXLAN/NVGRE, hardware-based iSCSI, iSCSI boot, TCP/IP offload
engine, and autosensing Ethernet speed capability)
Network Processor
Emulex XE-104
Data Transfer
Method
Network Transfer
Rate
x8 PCI Express 3.0
IEEE Compliance
802.3ae, 802.1Q, 802.3x, 802.1p, 802.3ad/LACP, 802.1AB(LLDP), 802.1Qbg,
Two ports, each at 40 Gbps bi-directional; 80 Gbps aggregate bi-directional theoretical
bandwidth
Page 47
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Technical Specifications
802.1Qbb, 802.1Qaz, 802.3ap
Standard Features
EnvironmentEnd-of-life
friendly Products Management and
and Approach
Recycling
Dual 20Gb ports provide up to 80Gb bi-directional per adapter
Multi-speed adapter operates at either 20GbE or 10GbE
Converges FCoE or RoCE with LAN traffic on a single Ethernet wire
Tunnel Offload support for VXLAN and NVGRE
RDMA over Converged Ethernet (RoCE) for greater server efficiency and lower latency
(6125XLG only)
Advanced storage offload processing freeing up valuable CPU cycles
Supports UEFI and legacy boot options
Mixed Storage – supports NIC + FCoE on one port, and NIC + iSCSI on the other
Concurrent Storage – concurrently supports NIC, FCoE, and iSCSI storage functions on
the same port (NIC + FCoE + iSCSI)
Industry-leading throughput and latency performance
Supports the HPE Flex-20 blade interconnect technology
Over eight million small packets/s, ideal for web/mobile applications, mobile messaging,
and social media
User configurable bandwidth settings when combined with the 20Gb Flex-20 Virtual
Connect module. From 100Mb/s to10Gb/s on up to four "Physical Function" NICs per
port, in increments of 100Mb/s for NIC. The combined bandwidth of NICs cannot
exceed port bandwidth i.e. 20 Gb/s.
Greater bandwidth with PCIe 3.0
Jumbo Frames support
Supports Wake On LAN (WOL)
Support for Preboot eXecution Environment (PXE)
Support for Microsoft Windows SMB Direct
Optimized host virtualization density with SR-IOV support
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product
return, trade-in, and recycling programs in many geographic areas. For trade-in
information, please go to: http://www.hpe.com/info/recycle .To recycle your product,
please go to: http://www.hpe.com/info/recycle or contact your nearest Hewlett
Packard Enterprise sales office. Products returned to Hewlett Packard Enterprise will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard Enterprise web
site at: http://www.hpe.com/info/recycle .These instructions may be used by
recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise
OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.
Page 48
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Summary of Changes
Date
28-Nov-2016
Version History
From Version 20 to 21
Action
Added
Removed
16-Sep-2016
From Version 19 to 20
Changed
Added
06-Jun-2016
From Version 18 to 19
Changed
Added
31-Mar-2016
From Version 17 to 18
Changed
Added
Removed
16-Feb-2016
From Version 16 to 17
Changed
Added
Removed
09-Oct-2015
From Version 15 to 16
Changed
Added
Removed
28-Sep-2015
From Version 14 to 15
28-Aug-2015 From Version 13 to 14
Added
Changed
Description of Change
SKUs added:
868814-B21, 868818-B21, 868822-B21, 868826-B21, 868830-B21,
871768-B21, 871770-B21, 872853-B21, 872855-B21
Turn Off Skus deleted:
816879-B21, 816889-B21, 816899-B21, 816919-B21, 816965-B21,
822559-B21, 816975-B21.
Obsolete SKUs were deleted:
655708-B21, 652745-B21, 717965-B21, 757339-B21, 717973-B21,
739898-B21, 717971-B21, 691868-B21, 691866-B21, 691862-B21,
789145-B21.
QuickSpecs information was updated.
Obsolete SKUs were deleted:
651281-B21, 734360-B21, 739888-B21, 717969-B21, 756636-B21,
BD883A, 854845-B21.
Models, Configuration Information - Factory Integrated Models, Core
Options, Memory, and Technical Specifications sections were updated.
SKUs added in Related Options and Core Options sections:
854845-B21, 809208-B21, 822559-B21, 846436-B21
Overview, Standard Features, Optional Features, Recomended Support
Services for BL460, Models, Confirguration Information - Factory
Integrated,Core Options, Additional Options, and Memory sections were
updated.
SKUs added to QuickSpecs:
813198-B21, 819852-L21, 819851-L21, 819842-L21, 819841-L21,
819840-L21, 819849-L21, 819839-L21, 819845-L21, 819846-L21,
819844-L21, 819838-L21, 819837-L21, 819856-L21, 819855-L21,
819854-L21, 819857-L21, 819853-L21, 819850-L21, 819848-L21,
819847-L21, 805347-B21, 805349-B21, 836220-B21, 805351-B21,
805353-B21, 805358-B21, 825555-B21, 819852-B21, 819851-B21,
819842-B21, 819841-B21, 819840-B21, 819849-B21, 819839-B21,
819845-B21, 819846-B21, 819844-B21, 819838-B21, 819837-B21,
819843-B21, 819856-B21, 819855-B21, 819854-B21, 819857-B21,
819853-B21, 819850-B21, 819848-B21, 819847-B21, 764908-B21,
764906-B21, 764904-B21, 765044-B21, 765038-B21, 765036-B21,
765034-B21, 764892-B21, 736939-B21, 736936-B21, 802891-B21,
846430-B21, 846432-B21, 846434-B21, 846436-B21, 816879-B21,
838404-B21, 838406-B21, 838408-B21, 838410-B21, 838412-B21.
Obsolete SKUs were deleted:
756601-B21, 691864-B21
Information updated in different sections.
SKUs Added in Core Options sections:
846495-B21, 846497-B21, 832514-B21.
Obsolete SKUs were deleted:
789135-B21, E5Y38A, E5Y39AAE, QK763A, QK762A, QK761A,
D8585AAE, D8584A.
Core Options section was updated.
SKUs added:
P8B24A, P8B26AAE, P8B31A
Obsolete SKUs were deleted:
756621-B21, 756657-B21, 789155-B21
SKU added in Additional Options:
745823-B21
Information in Core Options section was updated.
Page 49
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Summary of Changes
Added
17-Aug-2015 From Version 12 to 13
Changed
Added
Removed
19-Jun-2015
1-Jun-2015
From Version 11 to 12
From Version 10 to 11
Changed
Changed
Added
Removed
6-Apr-2015
From Version 9 to 10
Changed
30-Mar-2015
From Version 8 to 9
Added
Removed
27-Feb-2015
From Version 7 to 8
Changed
9-Feb-2015
From Version 6 to 7
Changed
Added
Removed
12-Dec-2014
From Version 5 to 6
1-Dec-2014
From Version 4 to 5
Changed
Added
Changed
Added
10-Oct-2014
8-Oct-2014
From Version 3 to 4
From Version 2 to 3
Removed
Changed
Changed
Added
17-Sep-2014
From Version 1 to 2
Removed
Changed
SKUs added in Core Options section:
659818-B21, 651281-B21
Standard Features, Optional Features, Configuration Information Factory Integrated Models, Core Options and Memory sections were
updated.
SKUs added in Additional Options and Core Options sections:
C9A82AAE, 804677-B21, 804671-B21, 804665-B21, 804639-B21,
804631-B21, 804625-B21, 832414-B21, 804613-B21, 804605-B21,
804599-B21, 804593-B21, 804587-B21, 804581-B21, 804575-B21.
Obsolete SKU deleted:
F6Q89AAE
Information updated.
Information in Optional Features, Configuration Information- Factory
Integrated, and Models sections was updated.
SKUs added:
726724-B21, 748387-B21, 791034-B21, 726793-B21
SKUs removed:
726793-B21, 741159-B21, 741151-B21
Industry Standard Compliance and Additional Options sections were
updated
SKUs Added:
741279-B21, 728629-B21, 726793-B21, 749975-B21, 726782-B21,
727261-B21, 802578-B21, 802582-B21, 802586-B21, 802891-B21,
781516-B21, 785067-B21, 765453-B21, 765455-B21, 765464-B21,
765466-B21, 789135-B21, 789145-B21, 789155-B21, 794603-B21,
794605-B21, 781518-B21, 785069-B21
Obsolete SKUs Deleted:
741146-B21, 741138-B21
Smart Buy 779805-S01 processor was updated in Product Bulleting
US version.
Core Options and Additional Options sections were updated
SKUs Added on Hard Drives section:
779164-B21, 779168-B21, 779172-B21, 779176-B21, 764923-B21,
764925-B21, 764927-B21, 764929-B21
SKUs removed:
728935-B21, 718939-B21
Descriptions were updated throughout the QuickSpecs.
SKU Added on HPE Smart Memory: 792278-B21
Overview, Standard Features, Configuration Information - Factory
Integrated Models and Core Options sections were updated
SKUs added:
759934-B21, 726720-B21, 775588-B21, 785233-B21, 757339-B21,
756657-B21, 756621-B21
SKU E5Y35AAE deleted due to compatibility issues
Smart Buy section added to the NA version only
Network Controller, Enclosures and Compatible SAN sections were
updated
HPE I/O Accelerator Options section has been added including
following SKUs:
QK763A, QK762A, QK761A
Expansion Blade Support section was deleted
Changes made throughout the Standard Features, Models,
SmartMemory, Core Options and Carepacks sections.
Page 50
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Summary of Changes
Sign up for updates
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo,
Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
c04347343 - 15052 - Worldwide - V21 - 28-November-2016
Page 51