World Leading Coordinate Measuring Machines Axel

World Leading Coordinate Measuring Machines
www.itpgroup.co.uk
Axel Offline Programming Module
Axel Offline Programming Software can be used in addition to the Axel CNC Visual
Programming option outlined above. It allows complete CNC programs to be created and
tested offline from a CAD model.
Features
•
Placement
envelope
•
Extraction of measured Geometric
Surface features from CAD model
•
of
CAD
model
within
CMM
and
Direct measurement of CAD model via
joystick control
•
Control of CNC speeds, back-offs, margins &
safety positions
•
Full control of program macro parameters to
cope with intricate parts
•
Standard Microsoft joystick or onscreen
joypad used to interface with CAD model for
measured points and learn positions
•
Renishaw probe-head, probe & styli model
definitions
•
Selection of defined PH10 positions
•
Easy insertion of extra learn points to avoid
collisions with fixtures / clamps etc
For a complete overview of the Axel Offline Programming Software module, please install
the CNC training overview from disk, or Download at www.itpgroup.co.uk.
Butlers Leap, Rugby, Warwickshire, United Kingdom. CV21 3RQ
Tel. +44(0) 1788 570 357 Fax. +44(0) 1788 567 991 Email. itp@itpgroup.co.uk
Company Registration No. 1192331
World Leading Coordinate Measuring Machines
www.itpgroup.co.uk
Axel Software
Minimum System Requirements
Microsoft Windows 98SE / 2000 / XP
Intel Pentium III Processor
256 MB Ram
40 GB Hard Disk Space
Nvidia OpenGL Graphics Card
1 Serial Port (2 if Renishaw PH10 probe required)
17” Monitor (Recommended)
Colour Printer (Recommended)
For Further Information Contact:
ITP Group Ltd,
Butlers Leap,
Rugby,
Warwickshire,
CV21 3RQ
Tel. +44 (0) 1788 570 357
Fax. +44 (0) 1788 567 991
Email. itp@itpgroup.co.uk
Web. www.itpgroup.co.uk
Butlers Leap, Rugby, Warwickshire, United Kingdom. CV21 3RQ
Tel. +44(0) 1788 570 357 Fax. +44(0) 1788 567 991 Email. itp@itpgroup.co.uk
Company Registration No. 1192331