DLI1971
10X Optical/10X Digital
Color Mini PTZ Domes
Installation and Operations Manual
Model Number: DLI1971
Description: 1/3”, Mini PTZ Dome
Day/Night 10X Optical/Digital Zoom
Mini-high Speed Dome
Operation Manual
TABLE OF CONTENT
1.Precaution----------------------- -- --------------- ------------------------------------------------ 1
2.Performance & Feature--------------------------------- - ------- - -------------------------------2
2.1 Dome parameter--------------- ------------------------------- ------ ----- -----------------2
2.2 Camera parameter----------- ------------------------------------- ------------------------2
2.3 Dome performance& Feature----------- ------------------------ -------------------------3
3.Function instru ction----------------------------------------- ---- ------------ ---- -4
3.1 Auto execute funct ion--------- ---- --------------------------------------------------- 4
3.2 Surveillance function----------- ---------------------------- ---------------------------4
3.3 Constant temperature function----- ----------------------------- ----------------------- 5
3.3 Constant temperature function----- ----------------------------- ----------------------- 5
3.4 Constant temperature Function ----- ----------------------------- ---------------------- 5
4.System setting---------------------------------------------------------- -- ----------------------6
4.1 Basic operation------------------ ----- --------------------------- ---------- ---------------6
4.1.1 Self-testing------- ------------------ --- --------- ------ -- -- ---------- ---------------6
4.1.2 Call the main menu------------ -------------------------- ----- - ----- ---------------6
4.1.3 Basic operation of menu and keyboard------- ----- --------- -- ---- ---------------6
4.2 Edit dome label----------- ------------------------------------ ------- - ----- ---------------- 7
4.3 Display initial information------------ ---------------------- --------- - -- - ---------------8
4.4 Display setup--------------- -------------------------------- - ---------- -- ---------------- 9
4.5 Systematic motion control--------------------------------------- - ----------------------10
4.5.1 Auto-flip------------ ------------------------- ----------- ---------------------------10
4.5.2 Timely auto-active action--- ------- ----------- ----------------------------------- 11
4.5.3 Power up action-------------- ------------------------- -------- ---- --------------- 11
4.5.4 Fan set-up--------------------------------------------------- ----------------------11
4.5.5 Fan startup by temperature-------------------------------------------------------11
4.6 Clear-------------------- ------------------ -------- --------- ------------ -- ---------------- 12
5.Index s etting------------------------------------------------ ----------- - - --------------------13
5.1Address setting------------- --------------- ------- --- ---- ------- ------------------------13
5.2 Ba ud ra te of protocol set ting -------------- ------------------------------------------ 13
6.Function setting-------------- -------------------------- ----------- ------- --------------------14
6.1 Preset setting------------- ------------------- ------- ------- ------------------------------- 14
6.2 Scant---------------------------- ------- ------- ------ ------- ---------------------------------- 15
6.3 Pattern------------------------------------------------------- --------------------------------16
6.4. Tour------------------------------------------------------- ---------------------------------- 17
6.5 Zone setting------------------------------------------------------- --------------------------18
7 installation instruction------------------------------------------------------- ---------------19
7.1 Dimension of product ------------------------------------------------------------------19
7.2 installation of product ------------------------------------------------------------------19
7.3installation of camera -------------------------------------------------------------------20
8. Appendix--------------------------------------------- ---------- -----------------------------22
8.1 Menu index ------------------------------------------------------- ---------------------22
8.2 Trouble shooting------------------------------------------------------- ---------------23
8.3 The cleaning of the transparent cover----------------------------------------------- 23
8.4 Rs485 Bus basic knowledge--------------------------------- ------- ------ -------------- 24
Precaution
1.Precaution
Ø Electrical safety
Conform to country and local electrical safety standard when using or installing the product. Using
local special power adapter. This dome uses DC12V/1500MA DC power supply.
Ø Transportation
The dome should be protected against extremes of pressure, vibration and humidity during storage and
transportation. It should be shipped in parts disassembled as the original packing did. Damage caused by
improper transportation is not within the warranty.
Ø Installation of care
Do not install it in any other orientation. Do not squeezed structure parts, which may cause mechanical
damage. Down cover is a precise optical product. Do not touch it directly to avoid scratches which can
affect image quality.
Ø Requirements to service personnel
All the service work should be done by qualified technicians.
Ø Do not disassemble the pan/tilt module
Do not disassemble screws and open the dome cover, as there are no users serviceable parts inside. Only
qualified and authorized personnel may undertake repairs.
Ø Environmental requirements
Operation environment temperature:-10℃-+50℃
Humidity:< 90%
Air pressure:86-106Kpa
Power supply:DC12V/1500MA
Ø Don't place the camera to be shoot by strong light objects
Don't place the camera to be shoot by strong light objects. Don't point the dome to the sun or other
bright objects when in use or not. It may affect image quality.
1
Dome performance
2.Dome performance
2. 1 Dome parameter
Setting
Power supply
Power supply
DC12V
Baud rate(RS485)
Cosumption
9W
Communication Protocol
Pan rotation
Pelco-D、Pelco-P、Factory , Sensornet
ID setting
Operational
Decoder
2400/4800/9600/19200bps
0-255
Physical
Built-in
360°
Operation temperature
-10℃ — +50℃
Tilt rotation
Tilt90°,with auto-flip
Environmental humidity
0—75%(no condensation)
Rotation speed
Pan1°~ 200°/S
Tilt1°~ 150°/S
Mount way
Ceiling mount
Preset
128
Monitor way
Preset/tour/scan/
pattern
Speed
Limitless variable-speedcontrolling
Weight
Material
Aluminum, iron and carbon alloy, plastic
2. 2 Camera parameter
Camera Parameters
Image Sensor
Resolution
Effective Pixels
Signal Format
Video Output
Camera Module
Focus
Aperture
Optical/Digital Zoom
Sync
AES
S/N Ratio
Min. Illumination
¼” Sony CCD
Color 500/570BW TVL
NTSC 768(H) x 494(V) / PAL 752(H) x 582(V)
NTSC/PAL
1V p-p (sync negative)
Samsung
Auto/Manual
F1.8~F3.2
10X/10X
Internal / VD-Lock
NTSC 1/60~1/120,000 sec. / PAL 1/50~1/120,000 sec.
>50dB
0.7LUX F1.8 / 0.02LUX BW F1.8
IRIS
Auto/Manual
Focus
Auto/Manual
White Balance
Gain
BLC
2
DLI1971 – 10X Color
ATW/AWC/Manual
Normal, High, OFF
Low/Middle/High/OFF
Dome performance
2.3 Dome performance and features
This product is high-technology surveillance product with high definition and color camera, variable-speed
pan/tilt and multifunction decoder. It can reduce the connection and installation process between systematic
parts at a max limit, and also can improve the stability and reliability of the system. Meanwhile it is easy to
install and repair, and it has the following advantages: beautiful shape, rotate lightly and neatly, little noise,
simple operation and so on.
1、Built-in digital camera
● High sensitivity, high resolution, and integrated digital processing
● Auto-focus
● Auto-Iris
● Auto brightness control
● Auto white balance
● IR cut filter
● Auto back light compensation
● Auto slow shutter
2、Built-in high resolution color camera with pre-focus lens.
a、 f=1.8 to 38mm auto iris lens
b、Auto brightness controlling
c、Auto white balance
d、Auto back-light compensation
e、Auto aperture
f、Auto focus
3、Integrated and multi-protocol decoder
a. Figure design, all the data are stored in the inner of camera pan/tilt,when power off, the storage data
can't be lose.
b. Built-in decoder,Integrated and multi-protocol,includePELCO-D PELCO-P FACTORY
、
、
, Sensornet
and mainstream protocols;The protocols can automatically recognised by the dome, and which can choose
corresponding protocol to communicate with host, it need not to be set by customers
c. 128 presets can be stored, support auto tour(but can transfer 1-80 presets), and 1 tour can store up to 32 preset.
d. 4 pattern tour
e. 1 scan
f. Built-in direction indicator
g. Built-in temperature indicator
h. Rs485 bus controlling in series, and dome ID;1-255
(optional)
4.Built-in pan/tilt
◆ Iron and carbon alloy structure, high intensity, and good heat dissipation.
◆ Precise stepping motor, rotate smoothly, react sensitivity and orientate accurately.
◆ Exquisite mechanical drive, support pan 360°continuously and tilt 0-90°, and may rotate180°
with auto flip.
◆ rotate slowly at pan 1°/s, and the image doesn't jitter.
5.OS D menu
◆ All the menu option are displayed in English.
◆ Video OSD menu. It is direct and simple to revise the dome information and parameter by keyboard and
menu display.
◆ May set park action, and set power up action or carry out appointed action.
6.Internal temperature test
◆
when the temperature exceeds the upper limit, the screen will display alarm information.
◆
According to the real-time temperature, the fan will measure if it starts or not, and prolong the life of fan.
3
、
Function instruction
3.Function in structure
This passage mainly describes the main function and general principle of integrated speed dome, and does
not refer to the concrete operation methods. Different system platform has different operation methods,
generally we should according to the system manuFactory's operation manual. Please contact dealer to get
necessary information, under some conditions there are have some particular requirements and operations.
3. 1Auto-run motion
◆ Focus/speed proportion pan
When manually adjusting, for far focus situation, the dome responds at a high-speed so that touching rocker
slightly may make picture move rapidly, thus cause the picture to lose. To base on humanized design, the dome
automatically adjust pan and tilt rotation according to zoom near and far, which make it is convenient to operate
manually to make tracks for the object. In the menu, you may change system parameter setting proportion pan as
ON, thus you may run this function.
◆ Auto flip
If user holds the joystick in the down position, the camera rotates pan 180 degrees, then t he camera rotates
tilts up to 90 degrees, you may directly watch the rear view to realize surveillance all pr ocesses in portrait 180
degrees . In the menu, you may set the system parameter setting AUTO FLIP as ON, thus you may run this
function.
◆ Park action
By the menu “ park time” and “park action”, user may set auto-call preset or run tour, pattern, and scan, etc
after pointing a few minutes if the dome doesn't run any motions.
◆ Power up action
By the m enu“ power up action”, afte r the dome powers up or restarts, user m ay s et auto- resume m otions before
power up and auto- call preset or run tour, pa ttern, and scan etc .
3. 2 Camera control
Ø Magnification control
The user can adjust zoom far and near of the image by keyboard controller “Wide/Tele” to obtain panoramic
im age or close view that you need.The speed dome support digital zoom and optical zoom.
Ø Focus control
Syste m defaults Auto focus. When the lens change s, camera will auto-adjust focus ac cording to the centre of the
im age to get legible image; user also can ma nually focus to get desire im age by operating keyboard “ FAR/NEAR” .
When operating keyboard joystick, cam era res umes to auto focus.
The camera cannot auto focus in the following status:
●Targe t is not the centre of the im age
●Observation the target near and far an the same time , can not be c lear at the same time..
●Target is a strong light object, such as spotlight & etc.
●Target moves too fast
●Target area such as wall
●Target is too dark or vague
●Target image is too sm all
4
Function Instruction
Ø Iris control
System defaults Auto Iris. Camera can rapidly adjust size of Iris, through the automaticly induct the
changing of environment ray, and thus make the brightness of deferent image stable.
User may adjust Iris by controller keyboard “open/close” to get required brightness that you need.
Useralso can resume auto Iris by joystick operation. When controlling the Iris manually, the dome locks current
position you manually controlled; when operating joystick, the dome resume auto Iris.
Ø
Auto back light compensation
Camera sub-area can carry out auto back light compensation. Under a strong light background, camera
will auto compensate light for the darker object and adjust daylight to the bright background. In order to avoid
making the image mess by the background is too high in luminance, and the object is unable to recognize
because of darkness, thus gain legible image.
Ø
Auto white balance
Camera can automatically adjust white balance in accordance with the alteration of background ligh
tness to reach a true colour.
3. 3 Monitor function
◆Set and call preset
Preset function is that dome stores the horizontal angle, slope angle, camera lens focus position and
parameters of current pan/tilt into the memory. When necessary dome can call these parameters, and
adjust pan/tilt and camera to this position.
User can call presets easily and promptly by using keyboard controlling. The dome can support 128 presets.
◆Tour
Tour is the built-in function in the speed dome. It can appoint setting in advance, and make presets
arranged in needful order in tour dwell. By inserting presets in tour dwell, to make the camera tour between
these presets. Tour order can be programmed, each time you run tour, you can set park time. A tour can store
32 preset.
◆Scan
User can easily preset right limit and left limit by controlling menu and menu, in order to make the
camera scanned between right limit and left limit at a setting speed.
◆Pattern
Pattern is built-in function in the speed dome; the dome can record the tracks that are no less than 180s,
when running pattern, the dome moves repeatedly according to the recorded tracks. A dome can set up to 4
pattern tours.
◆Lens position display
The position that the speed dome has finished to self-testing as 0 point of pan rotation and tilt
rotation. The pan range is 0-360°, and tilt range is 0-90°. According to the displayed information, to set the
position of camera lens, and the position can display on the screen.
3. 4 Constant temperature Function
Inner temperature sensor surveille temperature inside of the dome. When the dome work in the high
temperature, the dome will automatically to start-up the fan to reduce the heat, to make sure the dome work
in the reliable temperature environment, increase its stability and prolong the life time of the dome.
5
System setting
4.System setting
4. 1 Basic operation
4. 1. 1 Current-carring to dome and self-testing
The dome conducts self-testing after current-carring,and it rotates slowly until displaying pan origin that is default
setting, then moving to tilt origin, the lens will be pulled far to near and near to far, when self-testing is finished, there
is relevant system information displaying on the screen, as follow:
Dome model
Protocol
Dome ID
Communication parameter
The information will not disappear until you stop to operate the system. If you set“power up action”, the dome
will automatically activate motions after self-testing. How to operate the function? We will explain detail introduction
in following passages.
4.1.2 Call the main menu
The system enters into the main menu by 95preset or twice transfer 9 presesin 3 seconds . All the menu setting must
enter into the main menu at first.
4.1.3 Menu and keyboard operation
Ø
Keyboard operation:
【OPEN】 when choosing pictures, it means to increase Iris; when setting menu, it means to enter into the
next menu or setting, or save after finishing setting.
【Close】when choosing pictures, it means to reduce Iris; close to cancel.
【FAR】Focus to far
【NEAR】 Focus to near
【TELE】Increase magnification
【WIDE】Reduce magnification
Joystick to up: When choosing menu, it means to choose the former one; when choosing picture, it
means camera tilt up.
Joystick to down: when choosing menu, it means to choose the next one; when choosing picture, it
means camera tilt down.
Joystick to left: when choosing menu, it is equal with【Close】, when choosing picture, it means camera
tilt left .
Joystick to right: when choosing menu, it is equal with【Open】, when choosing picture, it means
camera tilt right.
Press【TELE】and【WIDE 】 at the same time, it means 3D joystick rotates joystick cap.
Ø Menu operation
“Back” : Back to the former menu
“Exit” : Exit to menu
“ On” : Open some setting
“Off ” : Close some setting
6
System setting
MAIN MENU
SYSTEM SETTING
COMM SETTING
4.2 Edit dome label
When using a lot of systems of the dome , in order to identify to each dome,
the systems support title setting. The setting ways as follow:
FUNCTION SETTING
EXIT
1、Use 95 preset or transfer 9 preset twice in three seconds to enter the
main menu.
2、Moving joystick up and down to move the cursor to 【SYSTEM SETTING】
press【OPEN】to enter the next menu.
SYSTEM SETTING
EDIT DOME LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
BACK
EXIT
3、Moving joystick up and down to move the cursor to【EDIT DOME LABEL】
press【OPEN】to enter the label setting menu.
4、Moving joystick up and down to move the cursor to【LABEL 】,press
【OPEN】to edit current label.
5、When the cursor is twinkling n the first character of the label,
to move joystick t choose character, after editing, Pressing【OPEN】to save.
6、Moving joystick to 【BACK】,press【OPEN】to back to the former menu.
EDIT DOME LABEL
LABEL: SPEED DOME
BACK
Notice: The label may set 16 characters, and doesn't need editing
characters. Pressing 【Open】continuously to jump over and using
spacebar to replace the deleted characters. When you finish to edita
character,pressing 【Open】to enter into the next editing character ;
when you editing the last character, pressing【 Open】 to save.
EXIT
Press [Close] to exit.C haracter of label is suitable for choosing as
follow: 0- 9、A-Z、:<>-., Space. Other labels’ input ways are
t he same as above.
7
System setting
MAIN MENU
4.3 Display initial information
SYSTEM SETTING
1、Use 95 preset or transfer 9 preset twice in three seconds to enter the
COMM SETTING
main menu.
FUNCTION SETTING
EXIT
2、Tilt up/down joystick to 【 SYSTEM SETTING】, press 【OPEN】
to enter submenu.
3、Tilt up/down joystick to【 INITIAL INFO】, press 【OPEN】 to
display initial information, which as below the left picture shows:
SYSTEM SETTING
EDIT DOME LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
BACK
EXIT
Initial information includes the name of manufacturer, soft edition,
camera address, communication parameter. System setting may
change the numerical value of initial information.
INITIAL INFO
SPEED DOME V1.00
PROTOCOL:FACTORY
Pelco P/D protocols - set the DIP Switches 1, 2, 3 to ON position
DOME ADDRESS:001
Sensornet protocol - set the DIP Switches 1, 2, 3 to OFF position
COMM:2400,N,8,1
BACK
EXIT
8
The Mini PTZ Dome provides the following Protocols:
System setting
4.4 Display setup
MAIN MENU
1、Use 95 preset or transfer 9 preset twice in three seconds to enter the main
SYSTEM SETTING
menu.
COMM SETTING
FUNCTION SETTING
2、Tilt up/down joystick to【SYSTEM SETTING】,press【OPEN】to enter
submenu.
EXIT
3、Tilt up/down joystick to 【DISPLAY SETUP】 ,press【OPEN】to enter
display setup menu, may setting the content of the display setup as follow:
● 【DOME LABEL】: dome label display setting
● 【PRESET LABEL】:preset label or scan label display setting
● 【ZOOM LABEL】: magnification display setting
SYSTEM SETTING
● 【ZONE LABEL】: zone label display setting
EDIT DOME LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
BACK
EXIT
● 【DIRECTION LABEL】 :direction label display setting
● 【TEMPERATURE LABEL】:temperature label display setting
4、Taking “display dome label”as an example to explain the operation
process.
Tilt up/down joystick to move cursor to 【DOME LABEL OFF】,press
【OPEN】, there is a sign
besides【DOME LABEL】, the cursor is
twinkling besides【OFF】, as left picture shows:
5、Joystick tilts up/down, setting switch between ON/OFF, when displaying
【ON】, it means to display dome label, press【OPEN】, thecursor jump
DISPLAY SETUP
DOME LABEL
PRESET LABEL
ZOOM LABEL
ZONE LABEL
DIRECTION LABEL
BACK
EXIT
OFF
OFF
OFF
OFF
ON
back to 【DOME LABEL】, label setting is finished, move the cursor to
【EXIT】,exit to the menu setting.
The display information on the screen will change with the dome rotation
through the information on the screen, user can see current dome inside
temperature, magnification, display zone etc. When all the labels are displayed,
the dome works as the following picture shows: (in the picture “305” means
pan angel,“45”means tilt angle.)
Dome label
Preset label
Zone label
Direction label
9
Zoom magnification label
System setting
MAIN MENU
4. 5 Systematic motion control
SYSTEM SETTING
Systematic motion controlling may control a series of
COMM SETTING
motions of the dome, and plays an important role in controlling
FUNCTION SETTING
the image of the dome.
EXIT
1、Use 95 preset or transfer 9 preset twice in three seconds to enter the
main menu.
2、Tilt up/down joystick to 【SYSTEM SETTING】,press【OPEN】
to enter submenu.
SYSTEM SETTING
EDIT DOME LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
BACK
EXIT
3、Tilt up/down joystick to【MOTION】,press【OPEN】to enter
systematic motion controlling menu, as left picture shows.
4. 5. 1 Auto flip
1、Operate joystick, move the cursor to 【AUTO FLIP】,
press【OPEN】to enter auto flip setting, tilt up/down joystick, for example;
choosing ON to open auto flip; choosing OFF to close auto flip. Press
【OPEN】to save.
4. 5. 2 Speed proportion pan
1、Operate joystick, move the cursor to 【PROPORTIONAL PAN】;
press 【OPEN】 to enter“ proportion pan” setting, tilt up/down
joystick to choose, if choosing 【ON】, it means to open proportion
pan; if choosing【OFF】, it means to close proportion pan , press
MOTION
AUTO FLIP
PROPORTION PAN
PARK TIME
PARK ACTION
POWER UP ACTION
FAN ENABLED
BACK
EXIT
【OPEN】 to save.
ON
ON
005
SCAN
AUTO
40
Operation knacks
when opening the auto flip function, user holds the
joystick in the down position, the camera rotates pan 180 degrees,
after the camera rotates tilts up to 90 degrees, you may directly
watch the rear view to surveillance all process in portrait 180
degrees.
10
System setting
4. 5. 3 Park action
MOTION
AUTO FLIP
ON
PROPORTION PAN ON
PARK TIME
005
PARK ACTION
SCAN
POWER UP ACTION AUTO
FAN ENABLED
040
BACK
EXIT
MOTION
AUTO FLIP
This setting allows the dome to run an appointed action after it enters
vacancy for a few time (1-240minutes). If default sets as 0, it means
not to run this action.
1、 Operate joystick, move the cursor to【PARK TIME】, press 【OPEN】
to tilt up/down joystick to set park time, the range is 0-240 (minute),
press【OPEN 】 to save.
【PARK A CTON】 is running action at park time, when 【PARK TIME】
sets as 0, this item can't be set.
2、Operate joystick, move the cursor to【PARK ACTON】, press 【OPEN】
there will be a sign
in the front of 【PARK ACTON】, the cursor jump
to right, after tilting up/down joystick to choose“ park action” ,
there are options for choosing as follow, press【OPEN】 to save.
● 【NONE】- (default) none action
● 【PRESET】 -use preset 1
● 【SCAN】 - run scan
● 【PAT1】 - run pattern X
● 【TOUR】 - run tour
ON
PROPORTION PAN ON
PARK TIME
005
PARK ACTION
SCAN
POWER UP ACTION AUTO
FAN ENABLED
040
BACK
EXIT
MOTION
AUTO FLIP
ON
PROPORTION PAN ON
PARK TIME
005
PARK ACTION
SCAN
POWER UP ACTION AUTO
FAN ENABLED
040
BACK
EXIT
4. 5. 4
Power up action
The dome stats to run actions after self-testing, if nobody intervenes
with it , the dome will repeatedly run this action continuously , if default
sets as 【NONE】.
1、 Operate joystick, move the cursor to 【POWER UP ACTION】: press
【OPEN】 to jump to the following choice, tilt up/down joystick to
choose “power up action”, press 【OPEN】 to save.
● 【NONE】 - none action
● 【AUTO】 - the dome resumes the primary action and
direction before power up.
● 【PRESET】 - use preset 1
● 【SCAN】 - run scan
● 【PAT1】 - run pattern X
● 【TOUR】 - run tour
4. 5. 5 Fan startup by temperature
The temperature of the dome will rise when its environment is in high
temperature. The fan will open automatically when the temperature reaches
to a temperature value in order to make sure the stability of the dome.
Operate joystick, move the cursor to 【FAN ENABLED】: press
【OPEN】 , the cursor will skip to the back option. The user can press
【OPEN】 to save it in actual condition.
The default setting temperature of the fan startup is 40 C. The user
also can enter into the fan startup setting to adjust the temperature of fan
O
startup. As picture shows: the temperature range is 0-60 OC.
11
System setting
MAIN MENU
SYSTEM SETTING
COMM SETTING
FUNCTION SETTING
EXIT
4.6 Clear
1、Use 95 preset or transfer 9 preset twice in three seconds to enter the
main menu.
2、Tilt up/down joystick to【SYSTEM SETTING】 ,press
【OPEN】to enter submenu.
3、Tilt up/down joystick to 【CLEAR】, press【OPEN】to enter
submenu, as left picture shows.
SYSTEM SETTING
EDIT DOME LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
BACK
EXIT
●
【CLEAR ALL ZONES】
●
【CLEAR ALL PRESETS】
●
【CLEAR ALL PATTERNS】
●
【CLEAR ALL TOURS 】
●
【Factory DEFAULTS】: resume the Factory default. Run
this function, the camera parameter and system parameter willresume
before production, clear all windows and alarm setting. Please be
cautious to use this function.
●
【RESTART】The dome restart.
4、Set clear zone as an example to explain the process. Tilt up/down
joystick
CLEAR
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL TOURS
FACTORY DEFAULTS
RESTART
BACK
EXIT
12
to【CLEAR ALL ZONES】,press【OPEN】to clear all zones.
Notice: once clear all commands in the controlling menu,
they does notresume,so please be careful of using.
System setting
5. Index Setup
MAIN MENU
5. 1 address of dome setting:
SYSTEM SETTING
1. Use 95 preset or transfer 9 preset twice in three seconds to enter
COMM SETTING
FUNCTION SETTING
EXIT
the main menu , go to 【COMM SETTING】as the picture, this set
is aim to set the index of operation address and protocol of the dome.
2. Move the cursor up and down to【 SITE ID】 option, press 【OPEN】
enter into the address setting , the range number is 0-255.
Notice: any control order must based on the aim dome address,
COMM SETTING
SITE ID
001
COMM SPEED 2400bps
dome only react to the order which address is sam e as its.
A. Common address: the dome only react the control order to the address
which as same as itself, the address range is 1- 254.
B. Broadcast address(only protocol of Factory and PecLo can be set):if the
BACK
customer use this address to control the dome, then all the domes control ed
EXIT
by the system will execute the same action, 255 is broadcast address.
C. Debug address (only protocol of Factory and PecLo can be set):if the
dome address is 0, then whatever which address was chosen by user can
control the dome.
COMM SETTING
SITE ID
COMM SPEED
001
2400bps
5. 2 Protocol rate setting
Enter into the main menu【COMM SETTING】 , move the
joystick up and down, move the cursor to 【COMM SPEED】 ,
BACK
press【OPEN】enter into the option of protocol rate of the dome,
EXIT
the baud rate have four options are 2400bps, 4800bps, 9600bps,
19200bps, choose the one you need, press【OPEN】to save it .
Notice: After all your set, the dome need re-power, after the self-test,then the
setting will be effective.
13
Function setting
MAIN MENU
SYSTEM SETTING
COMM SETTING
FUNCTION SETTING
EXIT
6. Function setting
6. 1 Preset setting
1、Use 95 preset or transfer 9 preset twice in three seconds to enter the
main menu. according to the order of the left picture, to click each
command to enter“ presetmenu”, various functions as follow:
●
【 PRES ET NUMBER 】selec t prese t numb er as cu rrent p reset
● 【 SET
P RESET 】
●
【 SHOW PRES ET】
●
【 CLEA R PRESET】
● 【 EDIT
PRESE T LAB EL】
Define preset and display preset function can be set by keyboard
operation, input preset number at first, then click the key“ save reset/call
preset” to carry out.
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
BACK
EXIT
2、Define current preset number: move the cursor to【PRESET N
UMBER】,press【 OPEN】to choose preset number, the range is 01-128,
as the left picture shows, here chooses number 5 as current preset, the
following operations aim at the current preset.
3、Define current preset: move the cursor to 【SET PRESET】, press
by operating joystick to adjust magnification, to choose good
objective image, press 【OPEN】 to save. If the image is very near, the
image is belong in digital zoom; when setting preset, the image will jump
to maximal optical zoom.
【 OPEN】 ,
Operation knacks
PRESETS
PRESET NUMBER
05
SET PRESET
SHOW PRESET
CLEAR PRESET
EDIT PRESET LABEL
BACK
EXIT
Preset function is that dome stores current pan/tilt angle,
zoom and other position parameters into the memory. When necessary
dome recalls these parameters and adjust camera to that position.
4、Display current preset: move the cursor to 【SHOW PRESET】,
press 【OPEN】, the screen will display the current preset;
5、Clear current preset: move the cursor to 【 CLEAR PRESET】 ,
press【OPEN】, the current preset is cleared.
6、Edit current preset label: move the cursor to 【EDIT PRESET LABEL】,
press 【OPEN】to enter into editing preset submenu,
system auto-sets label as PRESET-XX, press 【OPEN】to revise label.
EDIT PRESET LABEL
LABEL:PRESET-05
BACK
EXIT
Noti ce:
1.When run ning to progra m, dis play, cl ear pre set and editlabel, sho uld ch oose
pr eset nu mber a t first.
2.Th e label may se t up to 16 cha racters, and do esn't n eed editing ch aracters. Press
【Open】 contin uously to jump over a nd ues spaceb ar to re place t he dele ted cha racters.
W hen you finish to edit a char acter, p ress 【 Open】 toent er into the nex t editin g
cha racter;when y ou fin ish to e dit the last cha racter, pressing【Op en】to save. P ress
【C lose】 to exit.
Charac ter of l abel is suitabl e for ch oosing as follow: 0- 9、A-Z 、:<>- . , spac e.
14
Function setting
MAIN MENU
SYSTEM SETTING
COMM SETTING
FUNCTION SETTING
EXIT
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
BACK
EXIT
6. 2 Scan
Scan is that pre-set two points , then the camera repeatedly scan
between the two points at a stable speed, the same magnification and
pan . A dome only has one scan tour.
1、Use 95 preset or transfer 9 preset twice in three seconds to enter the
main menu ; click menu to enter “scan” menu, as the left picture shows.
●
●
●
●
●
●
【SCAN SPEED 】
【SET LEFT LIMIT 】
【SET RIGHT LIMIT】
【RUN SCAN 】
【CLEAR SCAN】
【EDIT SCAN LABEL】
2、Scan speed setting: operate joystick to 【SCAN SPEED 】, press
【OPEN], tilt up/down joystick to adjust scan speed, press 【OPEN】
to save.
3、 Left limit setting: operate joystick to 【SET LEFT LIMIT】, press
【OPEN], operate joystick to choose objective image, press 【OPEN】
to save.
4、Edit scan label: operate joystick, move the cursor to 【EDIT SCAN
LABEL】, press 【OPEN】 to enter submenu“ edit label”, move the
cursor to 【LABEL】, the system will auto-set the label as AUTO SCAN,
press【OPEN】 to revise.
SCAN
SCAN SPEED
50
SET LEFT LIMIT
SET RIGHT LIMIT
RUN SCAN
CLEAR SCAN
EDIT SCAN LABEL
BACK
EXIT
No tice: The lab el can set up to 16 ch aracte rs, and doesn't need editing
characters. Pres sing 【 Open】 conti nuously to jum p ove r and u sing sp acebar
to replac e the deleted c haracters. When you finish to edi t a character,
pre ssing【Open】to en ter into the n ext editing ch aracter ; when you fi nish
to edit the last characte r, pressing【Open】 to sav e.
Press 【Close】 to exi t.
Character o f label is suitable for choos ing as follow: 0-9、 A-Z、
:<>-. , spa ce. Th e editi ng way s of ot her lab els are the sam e as a bove.
5、Run scan: operate joystick to【RUN SCAN】, press 【OPEN】 to exit
the menu, and it stars to run scan.
EDIT SCAN LABEL
Notice:1. left limit and right limit of scan can't be set the same point.
2.Under scan process, speed, magnification and tilt direction won't
LABEL:AUTOSCAN
BACK
EXIT
change, if the speed, magnification and tilt direction of the two limits
are inconsistent, run scan is base on left limit.
15
Function setting
MAIN MENU
6. 3 Pattern
Pattern is built-in function in camera; the speed dome can record
SYSTEM SETTING
tracks that are no less than 180s. (A series of pan/tilt controlling and
COMM SETTING
lens controlling command). A dome may set up to 4 pattern tours.
FUNCTION SETTING
1、Use 95 preset or transfer 9 preset twice in three seconds to enter
EXIT
the main menu.
2、Operate joystick, move the cursor to 【FUNCTION SETTING】,
press 【OPEN】 to enter submenu.
3、Operate joystick to 【PATTERN】, press 【OPEN】 to enter menu
“Pattern”.
● 【PATTERN NUMBER】choose current pattern number
FUNCTION SETTING
as the current pattern.
PRESETS
SCAN
PATTERNS
TOUR
ZONES
BACK
EXIT
● 【PROGRAM PATTERN】define the track of the current
pattern
● 【RUN PATTERN】run current pattern
● 【CLEAR PATTERN】clear current pattern
● 【EDIT PATTERN LABEL】 edit current pattern label
4、Choose pattern number: move the cursor to 【PATTERN NUMBER】,
press 【OPEN】, pattern you choose as current pattern, the following
operations aim at the current pattern;
PATTERNS
PATTERN NUMBER
PROGRAM PATTERN
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN LABEL
BACK
EXIT
5、Define current pattern tour: move the cursor to 【PROGRAM
PATTERN】, press 【OPEN】 to set pattern track, move the image
wantonly, and draw the focus. The dome has a tour that is no less than
180s, a series of park time, magnification, focus will be recorded,
press 【OPEN】 to save.
6、Run pattern: Operate joystick to 【RUN PATTERN】, press 【OPEN】
to run, the dome will continuously and repeatedly record the specific
track.
Notice:
When carry out program, run, clear pattern and edit label,
EDIT PATTERN LABEL
LABEL:PATTERN-1
BACK
EXIT
16
should choose pattern number at first.
Function setting
6. 4
MAIN MENU
Tour
Tour is the built-in function in the speed dome, it will arrange
SYSTEM SETTING
the presets into the queue of auto-tour, and can set how long it will park
COMM SETTING
at preset. Operate auto-tour is a process of incessantly transfer each
FUNCTION SETTING
preset. One tour can store 32 presets at most.
EXIT
1、 Use 95 preset or transfer 9 preset twice in three seconds to enter the
main menu.
2、 Operate joystick, move the cursor to 【FUNCTION SETTING】,
press 【OPEN】enter submenu.
3、Operate joystick, move the cursor to 【TOUR】, press【OPEN】
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
BACK
EXIT
to enter menu “tour”;
4、Set the park time of preset: Operate joystick, move the cursor to
【TOUR DWELL】 press 【OPEN】, there will be a sign
in the front
of 【TOUR DWELL】, the cursor jumps to right, tilt up/down to set
park time, and the range is 000-255(s);
5、Set tour: move the cursor to tour dwell 【00-00-00...00】, press
【OPEN】, the first dwell is activated, tilt up/down joystick to choose
preset number, press【OPEN】, the cursor jumps to the next dwell,
press 【CLOSE】, the cursor jumps to the former dwell. After finishing
the last dwell of a line, press 【CLOSE】to save. Press 【CLOSE】 to
TOUR
TOUR DWELL
001
0 0-00-00-00-00-00-00-00
0 0-00-00-00-00-00 -00-00
0 0-00-00-00-00-00-00-00
0 0-00-00-00-00-00-00-00
RUN TOUR
BACK
EXIT
exit. If set the presets of the second line, move the cursor to the second
line, press 【OPEN】 to edit continuously. When the numerical value
is 00, the following presets are invalid. A tour can set up to 32 presets.
6、 Run tour: Operate joystick, move the cursor to 【RUN TOUR】,
press 【OPEN】to exit the menu, it stars to run tour.
17
Function setting
6. 5
MAIN MENU
Zone setting
A dome may be set up to 8 zones; the regional scene can't be
SYSTEM SETTING
overlapped. User will set label for each zone. When setting【ZONE
COMM SETTING
LABEL】 as ON, the dome will display zone label as it runs some zone.
FUNCTION SETTING
It is convenient to know the zone that the camera shoots by setting zone
EXIT
label.
1、Use 95 preset or transfer 9 preset twice in three seconds to enter the
main menu
FUNCTION SETTING
2、Operate joystick, move the cursor to 【FUNCTION SETTING】,
press 【OPEN】 to enter submenu.
PRESETS
SCAN
PATTERNS
TOUR
ZONES
BACK
EXIT
3、Operate joystick, move the cursor to 【ZONES 】, press 【OPEN】 to
enter submenu, as the left picture shows.
● 【ZONES NUMBER】choose zone number as current zone,
there choices in the menu aim at current zone.
● 【SET LEFT LIMIT】set current zone's left limit
● 【SET RIGHT LIMIT】set current zone's right limit
ZONES
ZONES NUMBER
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL
BACK
EXIT
1
● 【CLEAR ZONE 】clear current zone setting
● 【EDIT ZONE LABEL 】edit current zone label, as zone number
is 1. Zone label will auto-change as ZONE-1
Regard the left/right limit as the demarcation line, and set the
middle part as a zone. Various operational ways are the same as other
settings in the menu. Therefore we won't explain it again.
EDIT ZONE LABEL
LABEL:EAST
BACK
EXIT
18
Installation instruction
7. Installation instruction
7.1 Dimension of product
As picture below
Picture7.1- 2
Picture7-1
3. Insert three screw in the mini dome
into the aperture on the base board, then
turn 15 degrees in clockwise.
7.2 Product Installation
1. Get the product from the package
Picture7.1- 3
4 Connect the power line, video line and
Rs485control-line. As the picture below).
Video line
Yellow
Picture7.1- 1
2. Get ready the installation aperture, use
Brown
p ower line
three M4 screws to fasten the base board on
the roof. (As the picture Picture7.1-2)
Picture7.1- 4
19
Intallation instruction
7.3 Intallation instruction
3、Put one side of connection line which in the
accessories through the pinhole on the main rack.
1、Dimantle three M3screw from the stator,
then take the pan/tilt out.
Picture7.3- 3
Picture7.3- 1
4、use M2 nut to firm the discreteness of camera
on the stator
2、dismantle the decoration cover.
Picture7.3- 2
20
PDF created with pdfFactory Pro trial version
Picture7.3- 4
Installation instruction
5、Using 2 M2 screws through the bracket of
camera to fix the end of the camera.
7、put on decoration cover.
Picture7.3- 5
6、According to the position in the picture to display
the connection line of the camera in the right
position and insert the connector.
Picture7.3- 7
8、put on shell
Picture7.3- 6
Picture7.3- 8
21
Appendix
8.Appendix
8.1 Dome menu index
MA IN MEN U
SY STEM SE TTING→
CO MM SETT ING→
FU NCTI ON S ETTI NG→
EX IT
COMM SETTING
SYSTEM SETTING
ED I T DO M E LAB EL→
IN IT I A L IN F O→
D I S P LAY S E TU P→
M O TI O N→
CL EA R→
BA CK
EX I T
SI TE ID :
COMM SP EED:
BACK
EXIT
EDIT DOME LABEL
INI TI AL INF O
22
LABEL:PRESET-0 1
BACK
EXIT
PATTERNS
OFF
OFF
OFF
OFF
ON
OF F
MOTION
CLEAR
EDIT PRESET LABEL
01
SCAN
DIS PLAY SET UP
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL TOURS
FACTORY DEFAULTS
RES TART
BACK
EXIT
P RESET NUMB ER
S ET PRE SET
S HOW PRE SET
CL EAR P RESET
ED IT P RES ET LA BEL →
BA CK
EX IT
SCAN SPEED
63
SET LEF T LIMIT
SET RIGHT LIMIT
CLEAR SCAN
RUN SCAN
EDIT SCAN LABEL→
BACK
EXIT
SPEED DOM E V1.00
PROT OCOL : PELCO
DOME ADDRE SS: 00 1
COM M: 2400 . N.8.1
BACK
EXI T
AUTO FLIP
PROPORTION PAN
PARK TIME
PARK ACTI ON
POWER UP ACTION
FAN ENABLED
BACK
EXIT
2400BPS
PR ESETS→
SC AN→
PATTER NS→
TO UR→
ZO NES →
BA CK
EX IT
PRESETS
L ABEL:SPEE D D OM E V1 .0 0
BA CK
E XIT
DOME LABEL
PRESET LABEL
ZONE LABEL
ZOOM LABEL
DIRECTION LABEL
TEMPERATURE LABE L
BACK
EXIT
FUNCT ION SET TING
001
EDIT SCAN LABEL
LABEL: AUTO SCAN
BACK
EXIT
EDIT PATTERN LABEL
PATTERN NUMBER
1
PROGRAM PATTE RN
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN LABEL→
BACK
EXIT
L ABEL :PATT ERN-1
BACK
E XIT
TOUR
ON
ON
005
SCAN
AUTO
40
TOUR DWELL
005
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
RUN TOUR
BACK
EXIT
ZONES
ZONES NUMBER
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL→
BACK
EXIT
1
E DIT ZONE LABEL
LABEL :ZONE- 1
BACK
EXIT
Appendix
8.2 Trouble shooting
Trouble
No action, no
video after
power up
Solution
Possible causes
Power supply is damage or
power consumption is not enough
Replace
Power line is bad conne ction
Correct
Engineering line is malfunction
Check and repair
Refer to switch setting,reset the switch
The dome DIP switch setting is incorrect
Self-testing and
image are normal
Check Rs485connection, confirm
the connection is correct and
good in contact
Rs485 may carve out a way
but the dome is
uncontrollable
Pls consult appendix“Rs485
Bus acknowledge”
Rs485 is in malfunction
Video image
is not steady.
Elimi nate
Video line is bad connection
Power consumption is not enough
Replace right power adapter, it is better to p ut
the switch an d pow er adapter near the dome
Power consumption is not enough
Replace the power
Video image is not
steady and the
motor is malfunction
D ome controlling
is not smooth.
Controlling line is bad connection
1.Connect 120Ω resistance in the dome pan/tilt
Rs 485 load s so many o r th e dis tance
that is far from the controller
2.Increase distributor
o f commun ication is much far
8.3 The cleaning of clear down cover
To obtain constant clear videos, user should
clean the down cover periodically.
●
Be caution when cleaning, hold the down cover
ring only to avoid direct touch to the acrylic down
cover. The acid sweat mark of fingerprint will corrode
the coating of down cover and scratch on down cover
will cause vague image.
●
Use soft dry cloth or the substitute to clean the inner and outer surfaces
●
For hand contamination, use neutral detergent. Any cleanser for high grade furniture
is applicable.
23
Appendix
A+
B-
D
8.4 Rs485Bus basic knowledge
A+
Ø Characteristics of Rs485 Bus
As specified by Rs485 standard, Rs485 Bus is
B-
120Ω
1#
120Ω
2#
3#
4#
32#
of half-duplexed data transmission cables with
characteristicimpedance as 120Ω. The maximum
Pict ure8-4.2
load capacity is 32unit loads(including main
controller and controller equipment)
Ø The connection of 120Ω temination resistor:
Ø Transmission distances of Rs485 Bus
When user selects the 0.56mm(24AWG) twisted
The termination resistor is ready on the protocol
PCB.The are two kinds of connection(as show 8-4.3
pair wires as data transmission cable, the maximum
form). It is the factory default connection. The jumper
theoreticcal transmitting distance are as follow:
cap of switchboard is seated on pin 2&Pin 3 and the
termination resistor120Ωis not connected.
When connecting the 120Ω termination resistor,
Baud rate
Max distance
2400BPS
1800m
usershould pull out the protocol PCB and plug the
4800BPS
1200m
jumper on Pin1&pin2. Install the PCB back and the
9600BPS
800m
19200BPS
600m
termination resistor is connected.
(as show the picture8-4.3)
If user selects thinner cables, or installs the
dome in an environment with strong electromagnetic
interference, or connects lots of equipment to the
Rs485Bus, the maximumtransmitting distance will
be decreased. To increase the maximum transmitting
distance, do the contrary.
Ø Connection and termination resistor
The Rs485Bus standards require a daisy-chain
connection between the equipment. There must be
termination resistors with 120Ω(as the picture84.1). Please refer to picture 8-4.2 for simple
Connection of120Ωsetting
Factory default setting
1
On
Off
2
On
On
On means insert the jumper cap
connection. D should not exceed 7m.
Picture8-4.3
1 20Ω
1#
12 0Ω
2#
3#
4#
32#
Picture8-4.1
24
3
Off
On
Appendix
Ø Problems in practical connection
In some circumstances user adopts a star
configuration in practical connection. The
termination resistors must beconnected to the two
equipment 1# and 5# in picture 9-4.4. As the star
configuration is not in conformity with the
requirements of Rs485 standards,problems such as
signal reflections, lower antiinterferenceperformance arise when the cables are
long in the connection. The reliability of control
signals isdecreasedwiththephenomenathat the dome
does not respond to or just responds at intervals
tothe controller, or does continuous operation
without stop.
In such circumstances the Factory recommends
the usages of Rs485 distributor. The distributor can
change the star configuration connection to the mode
of connection stipulatedin the Rs485 standards. The
new connection achieves reliable data transmission.
(Refer to picture 9-4.5)
Rs 4 8 5 Di s t r ib u t o r
A+
B-
12 0Ω
1 2 0Ω
1#
1 2 0Ω
2#
1 2 0Ω
3#
1#
6#
Ma in c on t ro ll e r
32#
P i ctu r e 8-4 . 5
1 2 0Ω
1 5#
P i ct u r e 8- 4 . 4
Ø Rs485Bus troubles shooting
Trouble
Dom e can
do s elf-testing
but cannot
Possible cause
A、The address and baud rate setting of dome
are not in conformity with those of controller.
B、 The + and - connection of Rs485 Bus is incorrect
C、bad connection
be c ontrolled D、there are circuit in the Rs485Bus。
Solution
A、Chage the address and baud rat e of controller or dome
B、Adjust the + and -connection of Rs485;
C、Make sure the connections are fully seated;
D、Change Rs485 Bus wires
The dome can
A、the Rs485Bus is not in good contact with the connectors
A、Secure the connection;
be controlled
B、One wire of Rs485bus is broken
B、Replace Rs485 bus wires
C、The dome is very far from controller
C、Add termination resistors to the system
but the operation
is not smooth
D、There are two many domes connected in the system
D、Install Rs485 distributor
25
Download PDF