Ultra PoE Injector Hub 8_Issue 1 - 2017.indd

Ultra PoE Injector Hub
ELM-UPOE-INJ-8
8-Port Gigabit 60W Ultra PoE Managed Injector Hub (400W)
The ELM-UPOE-INJ-8, a cost-effective and quick Ultra PoE
solution, is designed to perfectly upgrade an existing network
infrastructure to Ultra Power over Ethernet network system
without replacing the existing Ethernet Switch.
Power over Ethernet
•
Ultra Power over Ethernet end-span/mid-span PSE
•
Up to 60 watts of power on 4-pair UTP
•
Backward compatible with IEEE 802.3at/af PD
device
•
54V DC, 60-watt PoE power output at maximum on each
port
•
400-watt PoE budget
•
Auto-detection of IEEE 802.3at/af PoE equipment and
device to avoid possible damage by incorrect installation
•
Circuit protection prevents power interference
between ports
•
Remote power feeding up to 100m
The ELM-UPOE-INJ-8 is a high-density, rack-mountable
managed Ultra PoE injector hub featuring intelligent PoE
PoE
•
•
•
•
•
•
•
•
functions through web user interface for remote
management. It provides 8 10/100/1000BASE-T Ethernet
ports featuring Ultra PoE injector with a total PoE budget of
400 watts. Each PoE port can deliver up to 60-watt power
over Cat.5/5e/6 Ethernet UTP cables which allow data and
power to transmit simultaneously to a remote 60W and
802.3at/af powered device (PD), such as PoE UltraPod™.
The ELM-UPOE-INJ-8 is installed between a regular
Ethernet Switch and the PoE UltraPod™. There are 16 RJ45
STP ports on the front panel of the UPOE-800G, of which the
8 ports are on the lower stack functioned as “Data input”
while the other 8 ports are on the upper stack
functioned as “PoE (Data and Power) output”. Both power
and data are transferred simultaneously over the UTP cables
performance and functions.
Management
Per port PoE power schedule
PoE function enable/disable
Per port PoE function enable/disable
PoE port power feeding priority
PD classification detection
Over temperature protection
PD alive check
PoE schedule
Management
•
Web interface for remote management
•
Supports Network Time Protocol (NTP)
•
Firmware upgrade through Web interface
•
SNMP trap for alarm notification of events
•
System log/remote syslog
Quick and Easy PoE Network Deployment
to the PoE UltraPod™ without affecting the existing network
Interface
•
Complies with the IEEE 802.3, IEEE 802.3u and IEEE
802.3ab Ethernet standards
•
16-port RJ45
- 8-port 10/100/1000Mbps “Data input”
- 8-port 10/100/1000Mbps “Data + Power output”
•
One 10/100/1000BASE-T management port
Hardware
•
19-inch rack mountable; 1U height
•
Reset button for resetting to default setting and system
reboot
•
LED indicators for PoE ready and PoE activity
•
LED indicators for power alert and fan alert
•
LED indicators for PoE power usage status (watts)
•
FCC Part 15 Class A, CE
Elmdene International Limited
3 Keel Close, Interchange Park,
Portsmouth, Hampshire, PO3 5QD, UK.
Tel: +44 (0)23 9269 6638
Fax: +44 (0)23 9266 0483
Email: sales@elmdene.co.uk
© 2011-2017 Elmdene International Limited
Specifications subject to change without notice.
ELM-UPOE-INJ-8-2017-Issue 1
Specifications
Model
ELM-UPOE-INJ-8
Hardware
Interface
“Data” Input Ports
8 x RJ45
“Data + Power” Output Ports
8 x RJ45
Management Port
1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX
Data Rate
10/100/1000Mbps
LED
System: SYS PWR x 1 (Green)
PoE Failure x 1 ( Red )
Fan Failure x 2 ( Red )
Management port x 2: 1000 (Green), 10/100(Orange)
Per PoE Port: Ultra 60W PoE-in-use x 1 (Green)
802.3at/af PoE-in-use x1 (Orange)
PoE Power Usage LED x4 (Green)
Power Requirements
100-240V AC, 50/60 Hz, 6.5A
Power Consumption
520 watts (max.)/1774BTU
Ventilation
Fan x 3
Dimensions (W x D x H)
440 x 300 x 44.5 mm, 1U height
Enclosure
Metal
Weight
4.2kg
Power over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
4-pair Ultra PoE
PoE Power Supply Type
End-span/Mid-span/UPoE(Ultra PoE)
Power Pin Assignment
Pair 1 end-span: 1/2(-), 3/6(+)
Pair 2 mid-span: 4/5(+), 7/8(-)
UPoE: 1/2(-), 3/6(+),4/5(+), 7/8(-)
PoE Power Output
DC 54V/60-watt PoE via 4-pair
DC 54V/30-watt PoE via 2-pair
PoE Power Budget
400 watts/1364BTU
Number of 60W PDs can be powered
6
Number of 802.3af PDs (Class 0, 1, 2, 3) can be powered
8
Number of 802.3at PDs (Class 1, 2, 3) can be powered
8
Number of 802.3at PDs (Class 0, 4) can be powered
8
Management
Management Interface
Web, PLANET Smart Discovery Lite
PoE Management
Power limit by consumption and allocation
PoE admin mode
Per port power schedule
Per port power enable/disable
Power feeding priority
Over temperature protection
Current per port usage and status
Total power consumption
PD alive check
Scheduled power recycling
Management Feature
Setup of system/management functions
Web firmware upgrade
SNMP trap for alarm notification of events
Standards Conformance
Regulatory Compliance
FCC Part 15 Class A, CE
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3af Power over Ethernet
RFC 768: UDP
RFC 791: IP
RFC 2068 HTTP
RFC 1157: SNMP v1
RFC 1902: SNMP v2c
RFC 5424: Syslog
Network Cable
10BASE-T: 4-pair UTP Cat5 up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat5 up to 100m (328ft)
1000BASE-T: 4-pair UTP Cat5e/6 up to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m)
Environments
Operating
Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 90% (non-condensing)
Storage
Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 90% (non-condensing)
Download PDF