NETWORK VIDEO RECORDER
Quick Manual
XRN-1610/2010/3010/2011
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
HDD Installation
XRN-2011
XRN-1610/2010/3010
1 Remove the screws located on the left/right side
and on the back side first, then remove the cover.
2 Remove the screws on the left/right side (4 screws)
and remove the bracket.
1 Open a front cover and push the latch to the right
and remove
2 After inserting one side, push and insert the other
side slightly
Bracket
USB
3 Align and push a bracket in the direction of the
board
ALARM
ALARM
IN RESET
1 2 3
4 5 6
7 8
G
NETWORK
2
NO NC
NO
COM
1
NO
COM COMNO
COM G
2
3
4
ALARM
RS­232C
OUT
eSATA
NETWORK
1
AUDIO OUT
VGA OUT
HDMI
3 Mount HDDs to the bracket and fix it with screws.
USB
CONSOLE
4 Connect the cable to the HDD by matching the HDD
SATA/power cable number to the HDD position
number on the bracket.
Bracket
※ How to exchange an installed HDD
Open the other bracket wide and remove it from the
holder
Bracket
ALARM
ALARM
IN RESET
1 2 3
4 5 6
7 8
G
NETWORK 2
NO NC
NO
COM
1
NO
COM COMNO
COM G
2
3
4
ALARM
RS­232C
OUT
eSATA
NETWORK 1
AUDIO OUT
VGA OUT
HDMI
USB
CONSOLE
J
ALARM
ALARM
IN RESET
1 2 3
4 5 6
7 8
G
NO NC
NO NO
COM
COM COMNO
COM G
1
2
3
4
NETWORK
2
RS­232C
ALARM
OUT
eSATA
NETWORK
1
AUDIO OUT
VGA OUT
HDMI
5 Mount the bracket on which an additional HDD is
mounted on the NVR, secure it with screws and
connect the SATA/power cable to the connector on
the main board by matching the number.
manually in the set before use.
※ Rack Installation
To install multiple NVRs in the rack, make sure to separate
the foot (turn it counterclockwise)
USB
G
NO
COM COMNO
COM G
2
3
4
ALARM
CONSOLE
6 Check for any problems in the connection terminal
and the wiring in the product, close the cover and fix
it with screws.
ALARM
ALARM
IN RESET
1 2 3
4 5 6
7 8
NETWORK 2
NO NC
NO
COM
1
USB
` If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD
VGA OUT
OUT
eSATA
NETWORK 1
AUDIO OUT
RS­232C
HDMI
USB
CONSOLE
7
8
5
3
6
1
4
2
8
6
5
2
7
4
3
2
1
M
` For Rack Installation, refer to “Rack Installation”.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
[ Installation ] Wizard
3 Set up Network
• DHCP server : If the DHCP server is set to enable, an IP is automatically assigned to the camera.
• Network 1 (Camera) : Connects to the camera and receives the video feed from the camera.
• Network 2 (All) : Network for a remote viewer (SSM, Smart Viewer, Webviewer)
• Network 1 / Network 2 Setup
- IP Type : Choose the network connection method.
- IP Address, Subnet Mask, Gateway, DNS
1 Select the language
Language will be changed immediately
※ For more details on network settings, refer to the User manual.
► To use a simple intranet, click <Next>.
2 Set Password
Password rule must be applied
※ Click
icon to see the password rule
4 Set Date & Time
5 Click <Finish> to finish Wizard
Camera Registration will be executed
8 ~ 9 characters : All combination of English character, Digit, Special character
10 ~ 15 characters : Two combination of English character, Digit, Special character
※ Not allowed to use same characters with ID
※ Not allowed to use 4 or more continuative or repeated characters
2-1. Setting Camera Password
You can change the password of the camera enbloc if the camera password is in a factory reset state.
If the camera password is not in a factory reset state, please enter the password of the current camera to
register the camera.
- New Password : Input a new password according to the password setting rules.
- Confirm Password : Input the new password again.
` A camera password registered with ONVIF and RTSP cannot be changed.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
3
6 Camera Registration
6-1. If there are *16/*32/*64 or less cameras searched, it will be automatically registered and the camera
information(fps, days of recording) will be displayed.
(*16 : XRN-1610, *32 : XRN-2010/2011, *64 : XRN-3010)
► choose <OK> to register automatically
► choose <Manual Setting> to adjust a framerate (go to 6-2.)
Package Contents
NETWORK VIDEO RECORDER
USB
6-2. Adjust the recording framerate
NVR
Mouse
Power Cable
Network Viewer Software /
User Manual CD
User Manual or Quick Manual
Terminal block
Bracket Rack
Bracket Fixing Screw
HDD SATA/Power cable
(N/A on XRN-2011)
HDD Fixing Screw
(N/A on XRN-2011)
Recording day will be changed by framerate.
6-3. If there are more than *16/*32/*64 cameras searched, Camera registration window will be displayed.
(*16 : XRN-1610, *32 : XRN-2010/2011, *64 : XRN-3010)
Select a camera to register and click the <Register> button. Once camera registration is finished, proceed in 6-1.
※ For an additional camera registration, refer to User manual.
Camera Register
After selecting a camera, press the register button.
0/32
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide
customers with more environmentally friendly products.
The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates
that the product satisfies the EU RoHS Directive.
Searched Cameras Refresh
|
IP
MAC
|
|
Model
Network
|
|
Status
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB
cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly
to promote the sustainable reuse of material resources.
Connected
Authentication errors
Household users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.
Disconnected
Register
Exit
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their
working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery
return system.
4
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Head Office
6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si,
Gyeonggi-do, 463-400 Rep. of KOREA
Tel : +82.70.7147.8753 Fax : +82.31.8018.3740
http://hanwha-security.com
Hanwha Techwin America
500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666
Toll Free : +1.877.213.1222 Direct : +1.201.325.6920
Fax : +1.201.373.0124
www.hanwhasecurity.com
Hanwha Techwin Europe
Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom
Tel : +44.1932.57.8100 Fax : +44.1932.57.8101
www.hanwha-security.eu
Hanwha Techwin(Tianjin) Co.Ltd
No.11, Weiliu Rd., Micro-Electronic Industrial Park, Jingang Road Tianjin 300385, China
Tel : +86.22.2388.7788
www.hanwha-security.cn
Hanwha Techwin Middle East FZE
JAFZA View 18, 20th floor, office 2001, 2002, 2003, Downtown Jebel Ali,
Dubai, United Arab Emirates
http://hanwha-security.com
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com