World Vision T213
Руководство пользователя Цифровой эфирный ресивер стандартного разрешения
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
World Vision T213
User’s manual
Digital terrestrial SD receiver
CONTENIDO
1.SAFETY INFORMATION....................................................................... 2-3
2.INTRODUCTION................................................................................... 4-5
3.SYSTEM CONNECTION....................................................................... 6
BASIC OPERATIONS
7-26
4.WELCOME PAGE ................................................................................ 7
5.EDIT CHANNEL.................................................................................... 7-10
6.INSTALLATION..................................................................................... 10-12
7.SYSTEM SETUP .................................................................................. 12-16
8.TOOLS ................................................................................................. 16-18
9.GAME.................................................................................................... 18
10.REC..................................................................................................... 18-21
11.HOTKEY.............................................................................................. 22-26
1
USING THE
SET TOP BOX
SAFETY
INFORMATION
To reduce the risk of fire or electric shock, do not expose this appliance
to rain or moisture.
CAUTION:To reduce the risk of fire and electrical
shock, do not remove the cover of this unit.
Please refer all servicing difficulties to qualified
technicians .
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
Warning: To reduce the risk of fire or electrical shock, do not expose this appliance to
rain or moisture.
Caution:To prevent electric shock,match wide blade of plug to wide slot and fully insert.
The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquid, such as vases, shall be placed on the apparatus.
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of
your video product,safety is a major factor in the design of every instrument.However ,
safety is your responsibility,too,This sheet lists important information that will help to
assure your enjoyment and proper use of the video. product and accessory equipment.
Please read them carefully before operation and using your video product.
Do not overload wall outlets, extension cords or convenience receptacles beyond their
capacity, since this can result in fire or electric shock.
Do not use unsuitable (unprotected) power outlet,this may be dangerous.
Check the connection regularly. If there is any rupture or failure in the insulation of
the cable and the unit, disconnect immediately and have the unit check by a
qualified technician.
Do not use the power cable connection anywhere near water or liquids, such as
bath, sink, swimming pool,laundry tub or inside a wet/ moist basement, etc.
Do not place the unit on an unstable object. The set may fall, causing serious injury
to a child or an adult and also serious amage to the unit.
Never place the unit near or on top of any heat radiating apparatus, such as heaters,
ovens, stoves, radiators, fan heaters,amplifiers, etc.
Also never expose the unit to direct sunlight as this may lead to the unit overheating.
Unplug the unit from the wall outlet before cleaning or polishing it.
2
USING THE
SET TOP BOX
SAFETY
INFORMATION
Do not use liquid or aerosol cleaners, alcohol or other cleaning sprays! Use a dry,
soft cloth to clean the exterior of the unit only!
Never place a heavy object onto the unit!
Do not defeat the safety purpose of the power plug. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet. Do
not force the plug into the outlet!
Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles,and the point where they exit from the apparatus.
Unplug this apparatus during lightening storms or when unused for long periods of
time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus
has been damaged in any way.
Switch off the main power when the unit is not in use. (Disconnect the power plug
from the power outlet when you do not intend to use the unit for a prolonged period
of time). Remove the disc before moving or switching of the unit.
Do not cover or touch any of the components inside the unit!
Install the unit on a flat surface with good air circulation. Please ensure the
ventilation holes are not covered,otherwise the unit will overheat and malfunction.
Read through this manual before installation and use.
3
USING THE SET TOP BOX
INTRODUCTION
Within approximately
6 meter (20 feet)
Safety:
Please read this operation manual before you use STB.to
avoid electric shock or fire hazard, do not open the cabinet.
Use a cloth lightly dampened with water for cleaning the
exterior of the unit.unplug the unit from the wall outlet if you
don’t use it long time.please don’t touch power line with
wetness hand.do not place it in a hot location and place it
inventilation location.turn off the power before connect
antenna.
Accessory:
Remote Control: 1
Receiver Sensor: 1
User Manual:
1
BE ENVIRONMENTALLY FRIENDLY
Do not dispose batteries as normal rubbish.
Be environmentally friendly,dispose batteries
following the Government's regulation.
4
USING THE SET TOP BOX
INTRODUCTION
CHANNEL+
POWER CHANNEL-
IR RECEIVER
USB
VIDEO OUTPUT LEFT OUTPUT
RF IN RF LOOP through
COAXIAL DIGITAL RIGHT OUTPUT
TV SCART
REMOTE CONTROL
1. NUMERIC ENTRY
15. GREEN BUTTON/FF
2. MENU
3. CH+
16. POWER
4. VOL- OR LEFT
5. OK
17. MUTE
18. RECALL
19. EXIT
6. PAGE UP
7. CH8. TV/RADIO
20. VOL+ OR RIGHT
9. INFO
10. AUDIO
11. SUB-T
23. EPG
24. TTX
25. RECORD
12. PLAY
13. PAUSE
14. RED BUTTON/FB
26. STOP
27. BLUE BUTTON/PVR
28. YELLOW BUTTON
5
21. PAGE DN
22. FAV
System
USING Connection
THE SET TOP BOX
6
Basic
Operations
USING
THE SET TOP BOX
4. Welcome Page
When turn on the power for the first time, the welcome page will be shown as below:
1 Press [Up/Down] key to move highlight.
2 Press [Left/Right] key to select region, language, Display mode, Aspect mode.
3 Move highlight to [OK] button and press [OK] key to begin the auto scan.
4 Press [Exit] key to exit wecome page and enter into main menu.
5. Edit Channel
When pressing the [Menu] key to enter the main menu, which shows as below:
1 Press [Up/Down] key to select menu pages among Edit Channel, Installation, System
Setup, Tools, Game, and REC.
2 Press [OK] or [Right] key to enter the “Edit Channel”. If Menu Lock is “On”, a dialogue
inquires the password, “0000” is for default.
3 Press [Up/ down] key to select menu items among TV Channel List, Radio Channel
List and Delete All.
4 Press [Left] key or [Exit] key to go back to main menu.
5.1 TV Channel List
When entering the “TV Channel List” menu, the window shows as below.
7
Basic
Operations
USING
THE SET TOP BOX
1 Move the highlight by pressing [Channel Up/Channel Down] key then press [OK] key
to preview the current highlighted program in the preview window.
2 By pressing [Page Up/Page Down] key to execute the Page Up/Page down function.
3 By pressing the [Volume Up/Volume Down] key to switch to different Program Group.
4 By pressing the [Menu] or [Exit] keys to go back to the “Edit Channel” menu.
5 By pressing the color key to execute the corresponding functions in “Channel List.
5.1.1 Favorite
1 Press the [FAV] key, and then [OK] key to open the “Favorite” window .
2 Move the highlight among the 8 favorite groups by pressing [Channel Up/Channel
Down] key, and press [OK] key to make a favorite mark in the left side of the
selected Favorite group.
3 Press [OK] key on the marked Favorite group to cancel the existing favorite mark.
4 After marking, press [Exit] key to go back to “TV Channel List”, there will be a
favorite mark beside the marked channel
5.1.2 Lock
1 Press [Red] key to enter the lock mode.
2 Press [Up/Down] key to move the highlight, and press [OK] key to display a
dialogue to ask you to input password, “0000” is for default. If the correct password
is entered, then a “lock mark” can be seen on the right side of the highlighted channel.
3 After saving and exiting the menu, the password dialog will be required while you
want to watch the locked channel.
5.1.3 Skip
1 Press [Green] key to enter skip mode.
2 Press [Up/Down] key to move the highlight and press [OK] to make a “skip mark” in
the right side of the highlighted channel.
3 After saving and exiting menu, the channel will be skipped while user change
channel in the full screen
5.1.4 Move
1 Press [Yellow] key, then press [Up/Down] key to move the highlight and press
[OK] key to make a mark. There will be a “moving mark” in the right side of the selected
channel .
8
Basic
Operations
USING
THE SET TOP BOX
2 By pressing [Up/ down] key to move the selected channel to the position that you
want to place. Press [OK] key to confirm your decision.
5.1.5 Edit
1 Press [Blue] key to open “Edit” menu.
2 Press [Exit] to exit “Edit Channel” menu. If you have done some modification in “Edit
Channel” menu, the system will show up a message box to inquire you whether
saving or not when exiting.
5.1.5.1. Sort
1 Press [Red] key can open the “Sort” window. There are four kinds of sorting
approaches. By Press [Channel Up/Channel Down] key to move highlight and
press [OK] key to confirm your selection.
2 The four kinds of sorting approaches are:
Name (A-Z): Sorting in Alphabetical descending Order.
Name (Z-A): Sorting in Alphabetical ascending Order.
Lock: Collecting all locked channels and list in the bottom of TV Channel List.
Default: Return to original setting order.
5.1.5.2. Edit
In “Edit Channel” menu, press [Green], then press [Up/Down] key to move the highlight
and press [OK] key to open the “Rename” window. Which shows as below:
1 Press [Yellow] key to switch whether capital or not.
2 Press [Red] key to delete the char on the cursor.
3 Press [Blue] key to save the modification.
5.1.5.3. Delete
Press [Blue] key, then press [Up/Down] key to move the highlight and press [OK] key to make
a delete mark in the right side of the highlighted channel. After save and exit “Edit
Channel” menu, the marked channel will be deleted.
5.2 Radio Channel List
Basically, the operations in “Radio Channel List” are almost the same as those of the “TV
Channel List”.
9
Basic
Operations
USING
THE SET TOP BOX
5.3 Delete All
Press [OK] key, it will pop up a warning message to inquire you whether delete all
services or not .
1 If the selection is “Yes”, all channels will be deleted.
2 If the selection is “No” or press [Exit] key, this function will be ignored directly without
saving.
Frequently asked Questions
Q: IF I recklessly delete all channels, what should I do?
A: There are two ways to restore:
To re-search all channels in “Installation” functions. Use “load Factory setting” function
to restore all channels in “Tools” function.
6. Installation
When you enter the “Installation” menu, the menu will be displayed as below:
1 Press [Up/Down] key to select menu pages among Auto scan, Channel scan, Aerial
adjustment, LCN.
2 Press [OK] or [Right] key to enter the “Installation”. If Menu Lock is “On”, then a dialogue
to inquiry the password will be shown. The default Password is “0000”.
3 Press [Up/ down] key to select menu items.
4 Press [Left] key or [Exit] key to go back to main menu.
6.1 Auto Scan
When you enter to “Auto Scan” menu, there will display the screen like below:
1 In “FTA only” item, press [Left/Right] key to turn yes/no.
2 Moving the highlight to “Search” item and press [OK] key to start scanning.
3 In the “Auto Scan” menu, press [Exit] key to draw back from the scanning.
10
Basic
Operations
USING
THE SET TOP BOX
6.2 Channel Scan
When entering to “Channel Scan” menu, a channel scan menu will be shown as below:
1 There are two choices of “Scan Mode,” by channel or by frequency.
If you scan by channel, “Scan Band” and “Ch No” are available to be adjusted.
If you scan by frequency, “Frequency” and “Bandwidth” are available to de adjusted.
2 There are two choices of “Scan Band,” “UHF” or “VHF.”
3 There are 56 choices of “CH No” ranging from In frequency “CH05(177500Hz) ” to
“CH69(858000Hz).”
4 You can adjust any frequency to search by.
5 There are three choices of “Bandwidth”, 6, 7, and 8 MHz.
6 When you complete your modification, move highlight to “Search” item and press [OK]
key, then it will begin to scan.
7 Press [Exit] key to exit the scanning.
6.3 Aerial Adjustment
When entering to “Aerial Adjustment” menu, a menu will be displayed as below:
1 The user can check and adjust the Signal Intensity and Signal Quality of every Ch No.
2 Tuner Power :on/off
11
Basic
Operations
USING
THE SET TOP BOX
6.4 LCN
LCN: To toggle the LCN mode On/Off
7. System Setup
When entering to “System Setup” menu, a menu will be displayed as below:
Press [Up/Down] key to select menu pages among Language,TV system,Local time
setting, Time setting Parental lock, Osd setting,Favorite.
7.1 Language
When entering the “Language” menu, you will see the screen as below:
1 Language: press [Volume Up/ Volume Down] key to select menu languages, the
selections of languages include:Danish,English,German,French,Spanish,Italian,
Portuguese,Greece
2 First Audio: Some channels have more than one available audio language; with
this function, a user can set the first audio for this channel. If the playing channel has
the same audio as the “First Audio” you set, system will play this audio language as
default. If the channel hasn’t the suited audio language, then the system will compare
automatically with the second audio language.
3 Second Audio: If the channel contains the audio track corresponding to the “Second
Audio” instead of the “First Audio”, system will play the second audio language as
default. If no audio language corresponds to the “Second Audio”, then the default
language of current channel will be played automatically.
4 Subtitle Language: Some channels have more than
12
Basic
Operations
USING
THE SET TOP BOX
one subtitle for choosing.With this function, a user can set the specified subtitle language.
If the playing channel has the same subtitle language as the “Subtitle Language” the
user set, system will play this subtitle language as default. If the channel hasn’t the
suited subtitle language, then the default subtitle language of current channel will be
played automatically.
5 Teletext: The user can set teletext language. If the streams have this language you
can see the teletext in language you set.
6 Press [Exit] key to draw back from “Language” menu.
7.2 TV System
When entering the “TV System” menu, you will see the screen as below:
1 Video Resolution:To switch the system output video resolution.
2 Aspect Mode:To switch the screen aspect ratio. By pressing [Left/Right] key to select each
mode circularly.
The following options are provided: 4:3 PS/4:3 LB/16:9/AUTO.
Auto means system won’t do any aspect ratio switching.
3 Video Out: setting the TV video output mode. There are two options are provided:
RGB/CVBS.
4 Press [Exit] key to draw back from “TV System” menu
7.3 Local Time Setting
1 Region: Select the country which the user is in.
2 GMT Usage: Set to be ON/OFF.
3 GMT Offset: Valid only when the setting of “GMT Usage” is “On”. By pressing
[Left/Right] keys to switch “GMT Offset” values ranging from -11:30 ~ +12:00, with the
increment unit by half an hour.
4 Summer Time: Valid only when the setting of “GMT Usage” is “On”. When “Summer
Time” is “On”, one hour will be added .
13
Basic
Operations
USING
THE SET TOP BOX
5 “Date” and “Time” items: Valid only when the setting of “GMT Usage” is “Off”.
By pressing [Left/Right] keys to moving highlight and the number keys for inpout.
6 Press [Exit] key to draw back from “Time” menu
7.4 Timer Setting
Select “Timer Setting” item and press [OK] key to enter “Timer list” menu.
Press [up/down] key to select a timer, then press [enter] key to open and adjust the timer
menu.
7.5 Parental Lock
Press [OK] key on “Parental Lock” item, a dialogue will be pop up to ask for the
password (“0000” for default.) Once the user make the password correct, a screen will
be shown as BELOW.
1 Menu Lock: determining the users’ intention to block the following menus with password:
“Edit Channel/Installation/Tools”.
2 Channel Lock: determining the users’ intention to play or lock channels with password.
If the setting is “Yes”, then the password will be asked to play the channels with lock
mark.
3 New Password: used for revising password, by keying in the new password in this
item. After the 4 digital numbers are filled, the Confirm Password item will ask you to
input the new password again. If the password is
14
Basic
Operations
USING
THE SET TOP BOX
correct, the screen will show up a message of “Saving Data, Please Wait…” After
finishing saving and drawing back to “System Setup” menu, the revising is completed.
4 Press [Exit] key to draw back from the “Parental Lock” menu.
7.6 OSD Setting
When entering the “OSD Setting” menu, a screen will be shown as below:
1 OSD Timeout: set the duration of showing up for the program banner which contains some
information about the channel and shows up once the channel is changed.
2 OSD Transparency: set the transparency of OSD. Press [Left/Right] key to select the
values. There are 5 levels of transparency, 10%, 20%, 30%, 40%, and “Off” (Opaque
of the OSD).
3 Load Default OSD Setting: press OK to restore default OSD setting.
4 Press [Exit] key to draw back from the “OSD Setting” menu.
7.7 Favortie
When entering the “Favorite” menu, a screen will be shown as below:
press [OK] key to rename the favorite group. A dialog shows as below:
15
Basic
Operations
USING
THE SET TOP BOX
1 Press [Yellow] key to switch whether capital or not.
2 Press [Red] key to delete the char on the cursor.
3 Press [Blue] key to save the modificationm,
7.8 Auto Standby
The STB will be automatically switched into standby mode after three hours in active mode
following the last user interaction and/ or a channel change,an alert message will show 2
minutes before going into standby mode.
8. Tools
Press [OK] or [Right] key to enter the “Tools”. If Menu Lock is “On”, it will display a
dialogue for user to key in password. The default Password is “0000”.
In “Tools” menu:
1 Press [Up/Down] key to select menu pages among Information,Load factory setting,
S/W Upgrade by OTA, Upgrade by USB, USB device, Remove USB device safely.
8.1 Information
When entering the “Information” menu, a screen will be shown as below. It shows the
version and date for the items such as “boot loader, main code, radio back, country band,
user db” information.
8.2 Load Factory Setting
press [OK] to load defaults settings, warning inquiry will be popup as below.Once the “Yes”
option is chosen, the all revised parameters of the receiver will be reset to the default alue.
Please use this function carefully.
16
Basic
Operations
USING
THE SET TOP BOX
8.3 Upgrade by USB
This function is only valid when the USB device has been plugged-in and attached at the
receiver box.Open Upgrade by USB menu according to Menu -> Tools-> Upgrade By
USB.
1. All Code: the user can only upgrade whole file to the STB flash ROM. Please rename the
new file name to be the format as “all*.bin”, Then Press OK key to start upgrade by
USB.
2. Main Code: the user can only upgrade part of the main code. Please confirm the
upgrading file format is “mcd*.bin”
Radio Back: the user can upgrade the background logo. Please confirm the
associated file name of the upgrading file to be as “*.m2v”
8.4 USB Device
USB menu will automatically be shown once inserting the USB disk to USB port,
except the status of auto scanning, multi picture displaying, and upgrading.
Another way to open USB menu is to go step by step according to Menu->Tools->
USB Device.
USB menu will be disabled when the USB device is unplugged. Media Player List will
not be saved after unplugging USB and/or going to standby and power off.
Media player menu will be shown as below :
17
Basic
Operations
USING
THE SET TOP BOX
FAV key: Put the selected file to play list .
0 Key: All the MP3 files in current directory will be added into MP3 play list .
1 Key: All the Image files in current directory will be added into Image play list.
2 Key:There are four kinds of sorting approaches. By Press [Channel Up/Channel
Down] key to move highlight and press [OK] key to confirm your selection.
The four kinds of sorting approaches are:
Name (A-Z): Sorting in Alphabetical descending Order.
Name (Z-A): Sorting in Alphabetical ascending Order.
Lock: Collecting all locked channels and list in the bottom of TV Channel List.
Default: Return to original setting order.
Yellow Key: The “Please select play list type” operation window will be shown by
pressing Yellow key. After that, the user can play the image or music by choosing the files.
If here is no file in the directory, an operation window “This type of play list doesnot exist”
will be shown.
INFO: Set up slide show of images.
Blue Key: To rotate among the 3 repeat modes provided
as below:
Repeat Folder
The entire Random Folder
Repeat Single
EPG Key: Change the different disk.
Music/Image play operation
Press Yellow key to enter into playlist and select music/group image
Red Key: Play the file list from the 1st music file.
Yellow Key: Delete the file highlighted by Yellow key.
Blue Key: Delete all files by blue Key, with a remind “Are you sure to save?”
18
Basic
Operations
USING
THE SET TOP BOX
8.5 Remove USB device safely
Before removing the USB device, press “Remove USB device safely” first, with a reminding
“You can safely remove USB device now!”. Then the USB device can be removed without
concern.
9. Game
There are three games for selection:Teris/Othello/Sodolcu.
10. REC
When you enter to “REC” menu, you will see the screen like below:
1 Press [Up/Down] key to select menu pages among record manager Record manager,
DVR HDD Information, HDD FORMAT, Dvr configuration.
2 Press [OK] or [Right] key to enter the “REC”. If Menu Lock is “On”, it will display a dialogue
for user to key in password. The default Password is “0000”.
3 Press [Up/Down] key and [OK] key to select menu items.
4 Press [Left] key or [Exit] key to go back to main menu.
10.1 Record manager
10.1.1 Lock
1 Press [Green] key to lock a program on HDD.
2 If you want to cancel the lock mark for a program, press [Green] key again. It will
ask you to input password. Once you input the correct password, it will cancel the
lock feature for the program.
19
Basic
Operations
USING
THE SET TOP BOX
10.1.2 Delete
1 Press [Blue] key to make a delete mark on the highlight program.
2 If you want to cancel the delete operation, press [Blue] key again to cancel the delete
mark.
3 When exit the “Record Manager” menu, all the delete mark channel will be deleted
directly.
10.1.3 Rename
1 Press [Red] key to rename the highlight program. It will show the “Rename” window.
2 You can press [Yellow] key to switch capital and lowercase.
3 Press [Red]key to delete the char on the cursor.
4 Press [[Blue] key to save the modification
10.2 Disk Information
1 Move the highlight to “DVR HDD Information” and press [OK] key. It will display “DVR
HDD information” as below:
10.3 DVR Configuration
Set up digital video recording
1. Turn ON/OFF timeshift
2. Set record type: TS/PS
20
Basic
Operations
USING
THE SET TOP BOX
10.3.1 Timeshift
1 Press [PAUSE] key to see time shift OSD as below:
2 You can press [Left/Right] to move the slide to left or right. Press [OK] key to play
the point where the slide is.
3 You also can press [Pause] /[fast back]/[slow /back] can realize these function. Then it
will enter the mode which is playing the recorded program on HDD. (like the picture
below) Then you can do pause, fast forward, fast back, slow forward, and slow back.
10.3.2 Record
14/01
1. Press record key to start recording
2. Press record key again to set and adjust recoring duration time
3. Press [Stop] key first time to end the playing mode. Press [Stop] key second time to stop
the recording
4. Press blue key to show the recorded files fastly,press OK to play the selected file.
Notes: Time Shifting/recording will only be available when USB/ HDD is connected
to system and read/write speed is high enough to do that.
21
Basic
Operations
USING
THE SET TOP BOX
11. Hotkey
11.1 Power
1 Press [Power] Key can enter the Standby state
2 In Standby state, press [Power] Key again can call back the unit and go on play the
previous channel
3 User can also disconnect the device’s main power to end the Standby state.
11.2 Channel Up/Channel Down
In full screen, press [CH+/CH-] to change channel.
11.3 Volume Up/Volume Down
In full screen, press [VOL+/VOL-] to adjust volume.
11.4 Number 0~9
In full screen, use number key and press [OK] on the Remote Control Unit to change
channel.
11.5 TV/RADIO
In TV mode, pressing [TV/RADIO] key can switch to Radio mode. In Radio mode, press
[TV/RADIO] key to switch to TV mode.
11.6 Audio
1 In full screen, press [AUDIO] key can open the “Audio” window on the screen.
2 You can modify the audio track by press [Channel Up / Channel Down] key and
modify the audio mode by press [Volume Up / Volume Down] key.
3 Mode: Left/Right/Stereo/Mono
11.7 Mute
1 Press [MUTE] key to mute the sound and the screen will show up mute OSD.
2 Press [MUTE] key again to restore sound.
11.8 Favorite
1 In full screen, press [FAV] key, it will display a window of “Favorite Group” on the
left of the screen, which you can watch like below.
2 In the window of “Favorite”, you can move highlight by press [Channel Up/Channel
Down] key and press [OK] key to select favorite group.
3 In the window of “FAV group X”, you can move highlight by press [Channel Up/
Channel Down] key and press [OK] key to select favorite channels.
22
Basic
Operations
USING
THE SET TOP BOX
Pressing [Page Up/Page Down] keys can implement the “Page up/Page down” function
4 You also can press [Volume Up/Volume Down] keys to select different “Favorite Group”.
5 Press [Exit] key to exit the current window. Frequently Asked Question
Q: Why the screen displays “No Favorite Channel”, afterpressing [Favorite] key?
A: It is because that you haven’t set any channels as “favorite channel”. Please
refer to Favorite
11.9 Recall
Press [RECALL] key will directly switch to the previous channel that you played before
current channel.
11.10 EPG
1 The STB has an Electronic Program Guide (EPG) to help you navigate channels
through all the possible viewing options. The EPG supplies information such as
channel listings and starting and ending times for all available channels. Press [EPG]
key to display EPG screen.
4
4
23
Basic
Operations
USING
THE SET TOP BOX
2 Press [OK] key in each item can see more detail information and press [Red] key to
cancel
3 Press [Red] key in EPG menu can display “Time Bar” Menu. In “Time Bar” menu,
you can press [Left/Right] to select “back/current time/last program or –0:30/next
program or +0:30/-2:00/+2:00/last day /next day”. Press [Up/Down] key to channel
change.
4 Press [Green] key in EPG menu can open timer menu. User can save a timer as he
want.
5 In EPG menu, press [Exit] to close EPG screen.
19/11/2004
11.11 Subtitle
Press [SUBTITLE] key in full screen, you can select subtitle and teletext subtitle
4
4
language or switch subtitle off.
24
Basic
Operations
USING
THE SET TOP BOX
11.12 TEXT
1 Press [TEXT] key in full screen, you can open teletext page on the channel which
has teletext information.
2 If the channel has no teletext information, it will show “No Data” on the screen.
11.13 Menu
1 Press [MENU] key can open the menu, exit the current menu to last menu or close
the window.
11.14 Exit
Press [EXIT] key can exit the current menu to last menu or close the window.
11.15 Information
1 In full screen, press [INFO] key can open information screen, it will shows program banner.
2 In the program banner, press [INFO] key again, the window shows the parameters
of current channel.
19/11
11.16 Channel List
1 In full screen, press [OK] key can enter “Channel List”.
2 Press [Left/Right] key to change favorite.
3 Press [Up/Down] key to move highlight and press [OK] key to play the highlighted
channel.
4 Press [Page Up/Down] key to page up and page down.
5 Press [Exit] key to exit the channel list.
25
Basic
Operations
USING
THE SET TOP BOX
11.17 Page Up/Page Down
1 In Channel list, press [Page+/Page-] key can page up and page down the channel list.
11.18 Record
1 Press [Record] key can record current program to USB disc. The default record
duration is 2 hrs.
2 Press [Record] key again can input record duration.
11.19 PLAY
Press [PLAY] key can change to normal playback mode while other trick mode is
enabled such as PAUSE, Forward or Reverse.
11.20 Pause
1 In playing mode, press [Pause] key, the picture will be paused, but
channel will still continues.
2 Press [PAUSE] key again, the screen’s picture will skip over to
picture, and the sound of the channel will correspond playing.
3 In playing mode, press [Pause] key, the picture will be paused, but
channel will still continues.
4 Press [PAUSE] key again, the screen’s picture will skip over to
picture, and the sound of the channel will correspond playing.
the sound of the
the current playing
the sound of the
the current playing
11.21 STOP
1 In the time-shift mode, press [STOP] key can stop time-shift play and comeback to
life position.
2 When recording, press [STOP] key will list the recording programs. Press [STOP]
again will stop recorder.
3 When playing recorded file from record manager, press [stop] key will stop playing
file and comeback to record manager menu.
11.22 FB
Press [FB] button rewinds backward with X2, X4, X8, X16 and X24 speed
11.23 FF
Press [FF] button plays forward with X2, X4, X8, X16 and X24 speed.
26
TROUBLE
SHOOTING
USING THE
SET TOP BOX
In some region, the digital terrestrial signal may be weak. So you'd better use the
antenna in which theN booster was built,for watching the weak sinal channels.
Problem
Possible cause
What to do
No signal found
Aerial is disconnected
Aerial is damaged/misaligned
Out of digital signal area
Check aerial lead
Check aerial
Check with dealer
No picture or sound
Tuned to digital teletext channel
Turn to another channel
Scrambled channel
message
Channel is scrambled
Select alternative channel
No response to remote
control
Receiver off
Handset not aimed correctly
Front panel obstructed
Hand set batteries exhausted
Plug in and turn on plug
Aim handset at front panel
Check for obstructions
Replace handset batteries
Forgotten channel lock
code
Contact help line
Try the super code :"8888"
Forgotten menu lock
code
Contact help line
Try the super code :"0000"
After moving the STB to
another room you find you
are no longer able to
receive digital reception
The aerial feed former new point Try a direct feed from the antenna
may come through a distribution
system which may reduce the
digital signal now received by the
box.
27
USING THE SET TOP BOX
SPECIFICATIONS
TUNER & CHANNEL
174MHz ~230MHz (VHF) & 470MHz ~862MHz (UHF)
RF INPUT CONNECTOR x1
(D-TYPE, IEC169-2, FEMALE)
RF OUTPUT CONNECTOR x1
(D-TYPE, IEC169-2, MALE (LOOPTHROUGH))
FREQUENCY RANGE:
SIGNAL LEVEL:
-10 ~ -70 dbm
DECODER
TRANSPORT STREAM
PROFILE LEVEL
VIDEO FORMATS
AND LEVEL
INPUT RATE
VIDEO FORMATS
Audio Format
VIDEO OUTPUT
MEDIA PLAYER
MPEG-2 ISO/IEC 13818-1
MPEG-1 MPEG-2 MP@ML
MPEG-4 AVC/H.264 HP@L3
MAX. 15Mbit/s@MPEG2 MP@ML
MAX. 12.5Mbit/s@H26.4/AVC
4:3/16:9 SWITCH ABLE
MPEG Layer I & II, 32 / 44.1 / 48KHz
CVBS,RGB
MP3/JPEG/BMP/OGG
MP4: Divx4.5.6; Maximal 1280x720 30fps;
(defined video codec)
AVI: Max L3.1 1280x720 30fps; (defined video codec)
CONNECTION
MAIN POWER CABLE
TUNER
SCART
USB
FIXED TYPE
ANTENNA INPUTx1, RF OUTPUT x1
TVX1
USB2.0 Hard disk
POWER SUPPLY
INPUT VOLTAGE
POWER CONSUMPTION
STANDBY CONSUMPIION
~5V-2A adapt
MAX. 11W
MAX. 1W
28