AW APPLICATION NOTE # B002 TECHNICAL SUPPORT DATE: December 2003 PAGE 1 / 2 Inserting LOGOS & adding TITLE to your video/computer sources with OCTO-FX INSERTED LOGO #1 INSERTED LOGO #2 MARY & JOHN REAR PANEL OF THE OCTO-FX TITLE YUV Y/C RGBHV 8 UNIVERSAL INPUTS COMPUTER (for titling) CAMERA RECORDING DATA SCAN CONVERTER NTSC COMBO DVD/VCR VCR AW APPLICATION NOTE # B002 TECHNICAL SUPPORT DATE: December 2003 PAGE 2 / 2 c AIM: Add simultaneously: - a moving title and/or - up to 2 logos over any video or computer image. d PRINCIPLE: Designed around the OCTO-FX: - up to 8 logos (pictures or text) are memorized. - up to 7 sources (video or computers) can be displayed full screen High Res. with or without TITLE and LOGOS. - 1 Computer is used to generate titles. Easily Fade in or out the selected logos. Add a shadow to increase Title contrast. REMARK: The addition of a scan converter on the second OCTO-FX output offers the ability to record the service/event on a VCR. e CONNECTIONS & OPERATIONS: - Connect the computer source (used for the titling feature) to the input #1. - Connect the other sources (camera, VCR, DVD) to the other inputs of the OCTO-FX. (Each input supports any type of signal). - Connect the display device to the output of the OCTO-FX. - Set the OCTO-FX in seamless mode (reference: on computer #1 input in our example). - Select the "background" source (camera source in our example): the source is displayed on the projectors & plasma screen. - Select the TITLE effect (with the EFFECT key). - Then select the computer source (input #1 in our example) to overlay the TITLE onto the displayed output. - Display the assigned logos (logo #1 and logo #2). f REMOTE CONTROL: - The OCTO-FADE can be controlled through its RS-232 interface (software provided or optional remote keypad). - An optional LAN control is also available. NOTE: Analog way offers a wide range of scan converters for the recording application.