HP BladeSystem c7000 Enclosure

QuickSpecs
HP BladeSystem c7000 Enclosure
Overview
HP BladeSystem c7000 Enclosure - Front View
1.
Device Bay 1
2.
Device Bay 2
3.
Device Bay 3
4.
Device Bay 4
5.
Device Bay 5
6.
Device Bay 6
7.
Device Bay 7
8.
Device Bay 8
9.
Device Bay 9
10.
Device Bay 9
11.
Device Bay 11
12.
Device Bay 12
13.
Device Bay 13
14.
Device Bay 14
15.
Device Bay 15
16.
Device Bay 16
17.
Power Supply Bay 1
18.
Power Supply Bay 2
19.
Power Supply Bay 3
20.
Power Supply Bay 4
21.
Power Supply Bay 5
22.
Power Supply Bay 6
23.
Insight Display
DA - 12810
HP BladeSystem c7000 Enclosure - Rear View
1. Active Cool Fans & fan bays
2. Interconnect Bays
3. Onboard Administrator
4. Power Inputs (single phase model shown)
North America — Version 6 — August 8, 2008
Page 1
QuickSpecs
HP BladeSystem c7000 Enclosure
Overview
What's New
Enhanced ICE-Linux Enclosure bundle to include the latest version of Insight Control Environment for Linux
At A Glance
This document covers the HP BladeSystem c7000 Enclosure. For more information on HP ProLiant Server Blades and HP
BladeSystem c-Class Interconnect Components please see the following QuickSpecs:
HP ProLiant c-Class Server Blades:
http://h18000.www1.hp.com/products/quickspecs/north_america/12534.html
HP BladeSystem c-Class Interconnect QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_na/12524_na.html
HP BladeSystem c-Class Infrastructure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12517_na/12517_na.html
HP BladeSystem c3000 Enclosure Quickspecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html
HP BladeSystem solutions start with a BladeSystem c7000 Enclosure, optional c7000 hot-plug power supplies, HP Active Cool Fans,
and an optional redundant Onboard Administrator module. Once the enclosure has been selected, the following components can
be added: networking interconnect modules, HP ProLiant and Integrity Server Blades, and Insight Control management tools.
Reference the QuickSpecs listed above.
Warranty - This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of purchase.
Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered
under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack
services or customized service agreements.
Enclosure: Three-year parts and labor, on-site limited global warranty. Certain restrictions and exclusions apply
Enclosure options: Fans, Power Supplies, Onboard Administrator, 1 Year parts only or enclosure warranty
HP BladeSystem Interconnects: 1 Year parts and labor, on-site regardless of the warranty period for the system in which
they are installed
HP Storage Fibre Channel switches have a maximum warranty period of one (1) year regardless of the warranty period
for the system in which they are installed
SATA hard drives have a one year parts and labor on-site warranty regardless of the system in which they are installed
For additional information please visit: http://www.hp.com/go/bladesystem
DA - 12810
North America — Version 6 — August 8, 2008
Page 2
QuickSpecs
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class Overview
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and
specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-5978ENW.pdf
HP BladeSystem c-Class
c7000 Enclosure
A BladeSystem c7000 enclosure holds up to 16 server and/or storage blades plus redundant network
and storage switches. It includes a shared, multi-terabit high-speed mid-plane for wire-once connectivity
of server blades to network and shared storage. Power is delivered through a pooled power backplane
that ensures the full capacity of the redundant hot-plug power supplies is available to all blades.
Each c7000 enclosure is built with the following functions:
Up to 16 half-height and/or up to 8 full-height server blades and/or storage blades per
enclosure.
Up to 4 different interconnect fabrics (Ethernet, FC, IB, iSCSI, SAS, etc.) supported simultaneously
within the enclosure.
Choice of a single-phase, three-phase or a -48V DC power subsystem - for flexibility in
connecting to datacenter power.
HP Thermal Logic technology for lower power consumption and airflow.
Four (4) or Six (6) Active Cool fans as standard. For redundancy and improved power
consumption and acoustics; additional Active Cool Fan kits can be added for a maximum of 10
fans.
Redundant hot-plug cooling, redundant hot-plug power supplies, redundant connections,
redundant interconnect modules, optional redundant Onboard Administrator management
modules.
Lowest cost of ownership.
Full AC redundancy - with no power zones.
An Onboard Administrator management module is built in to the enclosure with the following functions:
Robust, multiple enclosure setup and control.
Reports asset and inventory information for the devices in the enclosure.
Reports thermal and power information, including real-time actual power usage per server and
per enclosure.
Front-mounted Insight Display for easy management within the datacenter.
Integrated access to all server blade iLOs from a single cable.
Provides integrated access to interconnect bay device management ports from the single Onboard
Administrator cable.
Single sign-on capability for all devices in the enclosure
Role-based security locally and/or with LDAP directory services.
Provides a wizard-based initial setup process for easy configuration.
A BladeSystem c7000 enclosure provides the following benefits:
With local and remote hardware management integrated across the solution, one full enclosure
can be managed as easily as one server.
Scalable: Management and network interconnects extend scalability beyond a single enclosure,
allowing resources to be pooled and shared across multiple enclosures.
Investment protection: Accommodates multiple server and network designs in one enclosure.
Lower costs per server, in comparison to rack-mounted servers
Lower power consumption, in comparison to rack-mounted servers.
Lower airflow requirements, in comparison to rack-mounted servers
DA - 12810
North America — Version 6 — August 8, 2008
Page 3
QuickSpecs
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class Overview
HP c3000 Enclosure
For customers that need a smaller system the c3000 is the perfect solution. Supporting up to 8 blades
and 4 interconnects the c3000 enclosure provides and ideal solution for Small and Medium businesses
and remote sites for more information refer to the c3000 QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html
HP ProLiant & Integrity
Server Blades
Delivering best-in-class performance, choice and reliability on AMD Opteron™, Intel® Xeon® and
Intel® Itanium 2® processors for Windows, Linux, Solaris, or HP-UX based servers; the HP portfolio of
server blades supports a variety of application requirements for scale-out architectures. HP offers one-,
two-, and four-processor server blades, with the widest range of performance, and form factors.
For more information please see:
http://h18000.www1.hp.com/products/quickspecs/north_america/12534.html
HP SB40c Storage Blade The StorageWorks SB40c is a half-height c-Class storage blade featuring support for up to six hot-plug
Small Form Factor (SFF) Serial Attached SCSI (SAS) or Serial ATA (SATA) hard disk drives. The SB40c
connects directly to the adjacent server blade to provide up to 876GB additional storage capacity to that
blade. For maximum fault tolerance the SB40c uses supports hardware RAID 0, 1, 1+0, 5, and 6
(ADG), using the onboard Smart Array P400 with up to 256MB of battery-backed write cache.
For more information please see:
http://h18000.www1.hp.com/products/quickspecs/12587_na/12587_na.html
HP StorageWorks Tape
Blades
The HP StorageWorks SB920c Tape Blade is an LTO-3 Ultrium tape blade that provides up to 800GB of
capacity on a single data cartridge (2:1 compression) and performance up to 432GB/hr (2:1
compression).
The Ultrium 448c Tape Blade is an LTO-2 Ultrium tape blade the provides up to 400GB of capacity on
a single data cartridge (2:1 compression) and performance up to 173GB/hr (2:1 compression). Both
tape blades are ideal for HP BladeSystem c-Class customers who need a data protection solution but are
not connected into a Storage Area Network (SAN). They provide direct attach data protection for the
adjacent server and network backup protection for all other data within the enclosure. The HP
StorageWorks tape blades are the industry's first bladed tape drives and are developed exclusively for the
BladeSystem c-Class enclosures.
For more information, please visit:
http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
DA - 12810
North America — Version 6 — August 8, 2008
Page 4
QuickSpecs
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class Overview
Rack Airflow
Requirements
Rack 10000 series cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
NOTE: For operation with the DC Input Module the 1000 Series Rack Extension is required to allow DC
Power Cabling to be installed.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for ventilation).
The clearance from face of rack to inside of the front door needs to be 1.75" minimum.
Side: The clearance between the installed rack component and the side panels of the rack must be
a minimum of 2.75 inches (7 cm).
Depth: Minimum 39.4 inches (1000mm), 47 inches (1200mm) for DC Power Input
Adjustable rack rails are shipped with each enclosure:
Minimum rail length: 25 inches (635mm)
Maximum rail length: 34 inches (864mm)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging and custom packaging. HP products supported through Factory Express include: a wide array of
servers and storage: HP Integrity, HP ProLiant & HP ProLiant & Integrity Server Blades, HP BladeSystem,
HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable
network switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express
DA - 12810
North America — Version 6 — August 8, 2008
Page 5
QuickSpecs
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class Overview
Insight Control
Environment for
BladeSystem
Management Suite
Insight Control Environment for BladeSystem delivers foundation management for HP BladeSystem
lifecycles, including hardware resource deployment, health monitoring, software version control,
performance monitoring, vulnerability scanning and patch management.
Installs and licenses the following components by default using a wizard-based integrated installer:
HP Systems Insight Manager
HP iLO Select Pack
HP ProLiant Essentials Rapid Deployment Pack
HP Insight Power Manager
HP ProLiant Essentials Virtual Machine Management Pack
HP ProLiant Essentials Performance Management Pack
HP ProLiant Essentials Vulnerability and Patch Management Pack
Additional ProLiant Essentials software and management tools included on the Insight Control
Management kit.
HP Server Migration Pack - Universal Edition
NOTE: HP Server Migration Pack - Universal Edition is licensed separately from the Insight
Control Environment Suite.
HP Open Service Event Manager
HP Instant Support Enterprise Edition
NOTE: HP Server Migration Pack - Universal Edition can be installed from the SMP-P2P CD included in
the Insight Control Management media kit.
NOTE: For additional product and licensing information about Insight Control Environment for
BladeSystem, HP Systems Insight Manager and ProLiant Essentials software refer to:
http://www.hp.com/go/insightcontrol.
HP Insight Control Environment for Linux (ICE-Linux) provides comprehensive discovery, imaging &
deployment, monitoring, and management for Linux-based HP ProLiant server platforms. Built on the
industry-leading HP Systems Insight Manager framework, this solution integrates open source technology
with experience leveraged from HP's Linux products in HP ICLE and HP XC Clusters, while providing
paths to the future with developing management technologies.
iLO Power Management Pack for BladeSystem is energy-efficient management software that delivers
centralized control, reliable security, and energy savings for your BladeSystem infrastructure. iPMP
combines the total control of iLO 2 Advanced in the area of remote management with the energy
monitoring and control of the Insight Power Manager to deliver a robust solution capable of full remote
control and power management of ProLiant servers through a unified interface within HP Systems Insight
Manager.
HP Insight Control management suites and select ProLiant Essentials will include one year of 24 x 7 HP
Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service, please visit:
http://www.hp.com/services/insight.
DA - 12810
North America — Version 6 — August 8, 2008
Page 6
QuickSpecs
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class Overview
Server Management
Stand Alone Software
Product - ProLiant
Essentials
HP Systems Insight
Manager
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible standards-based environment to centrally manage servers, storage
and other infrastructure devices, (both HP and non-HP) across multiple
operating system platforms.
ProLiant Essentials Rapid Rapid Deployment Pack (RDP) extends HP Systems Insight Manager with a
Deployment Pack
complete deployment solution for HP ProLiant servers. RDP provides a
central location to configure server hardware, deploy Windows, Linux and
VMware ESX operating environments and install HP ProLiant Support Pack
drivers using images and scripted profiles. For more information, visit:
http://www.hp.com/servers/rdp.
ProLiant Essentials
Performance Management Pack (offered exclusively through the Insight
Performance Management Control suites) - a performance management solution that identifies and
Pack
explains hardware performance bottlenecks on ProLiant servers and attached
options enabling users to better utilize their valuable resources
ProLiant Essentials Server Upgrading, replacing, or virtualizing your existing server? Effortlessly
Migration Pack - Universal transition to new virtual or physical HP ProLiant servers or BladeSystem with
Edition
automated, accurate and affordable migration of OS, application and data.
SMP Universal automates the manual processes required for migrating
servers between physical or virtual platforms, whether migrating to VMware
or Microsoft virtual machines. SMP Universal allows all of the following
migrations:
physical to ProLiant
physical to virtual
virtual to virtual
virtual to ProLiant
NOTE: For more information, visit: http://www.hp.com/go/migrate.
Virtual Connect Enterprise Simplifies the management of BladeSystem environments that use Virtual
Manage
Connect to control LAN and SAN connectivity, helping organizations
increase productivity, respond more quickly to business demands, and
significantly reduce operating costs.
Virtual Machine
Get the most out of server virtualization by unifying the management of
Management Software
physical and virtual servers in HP Systems Insight Manager. The Virtual
Machine Management Pack plug-in provides central management and
control of VMware and Microsoft virtual machines and provides physical host
to virtual machine association.
HP Insight Power Manager Upgrades the single-server remote management capabilities of iLO
(IPM)
Select/Advanced to include centralized reporting and policy-based
management of power consumption and thermal output provided by the
Insight Power Manager. IPM unifies all of this functionality within a single
user interface - HP Systems Insight Manager.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer
to: http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product
QuickSpecs for more information.
DA - 12810
North America — Version 6 — August 8, 2008
Page 7
QuickSpecs
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class Overview
Core Infrastructure
Management
SmartStart
Insight Management
Agents
SmartStart is a tool that simplifies server setup, providing a rapid way to
deploy reliable and consistent server configurations. For more information,
please visit the SmartStart Web site at:
http://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 7.60.
The Insight Management Agents should be installed on all HP servers to
present system instrumentation, health and configuration information into HP
Systems Insight Manager and the HP System Management Homepage. The
HP System Management Homepage aggregates systems data from Insight
Management Agents and other HP management tools, providing a
consolidated browser-based interface for managing individual servers.
Insight Management Agents and The HP System Management Homepage
are included on ProLiant Support Packs, and can also be installed using the
server profiles provided with the ProLiant Essentials Rapid Deployment Pack.
Subscriber's Choice
ProLiant Support Packs
and ROMPaq, software
HP Software Support
For additional information about the Management Agents and the HP System
Management Homepage please visit the management Web site at:
http://www.hp.com/servers/manage.
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
The latest software, drivers, and firmware fully optimized and tested for your
ProLiant server and options, available through ProLiant Support Packs the
ProLiant Essentials Rapid Deployment Pack, SmartStart or downloaded from
software and drivers download pages website at:
http://www.hp.com/go/support.
HP Insight Control Environment for BladeSystem and Insight Control Environment for Linux will include
one year of 24 x 7 HP Software Technical Support and Update Service. This service provides access to
HP technical resources for help in resolving software implementation or operations problems. The service
also provides access to software updates and reference manuals either in electronic form or on physical
media as they are made available from HP.
With this service, HP Insight Control Environment for BladeSystem and Insight Control Environment for
Linux customers will benefit from expedited problem resolution and proactive notification and delivery of
software updates.
To activate your HP Software Technical Support and Update Service for HP Insight Control Environment
for BladeSystem and Insight Control Environment for Linux, you must register your software purchase
through the HP website at: http://www.hp.com/services/insight.
Failure to register your service will jeopardize service fulfillment.
Your Service Agreement Identifier (SAID) will be delivered to you after registration. After you have
received your SAID, you can go to the software update manager (SUM) web page to view your contract
online and elect electronic delivery (in addition to standard media-based updates). For more information
DA - 12810
North America — Version 6 — August 8, 2008
Page 8
QuickSpecs
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class Overview
about this service, see: http://www.hp.com/services/insight.
HP Enterprise
Configurator
The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs and expectations of our valued
customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or
an Authorized Partner for assistance.
HP BladeSystem Power
Sizer
The HP BladeSystem Power Sizer helps in sizing the power infrastructure needed for a HP BladeSystem
solution. This sizer enables effective planning for the power consumption and heat load of the
BladeSystem at its site.
The sizer enables you to:
Select the type and number of components within each Blade Server and Blade Enclosure.
View the effect of component changes on the power consumption and heat loading.
Review server loading and determine power supply and power subsystem requirements.
Approximate electrical and heat load for facilities planning purposes.
The sizing estimate is based on component level power measurements for a system stressed to maximum
capability.
Values obtained from the BladeSystem Sizer tool are measured with all components stressed to 100%
load and are intended for facilities planning purposes only. Actual power consumption varies with
application type, application utilization, and ambient temperature.
The p-class BladeSystem and the c-Class BladeSystem solutions are supported in the BladeSystem Power
Sizer.
Available at: http://www.hp.com/go/bladesystem/powercalculator
Service and Support
HP Care Pack services provide total care and support expertise with committed response designed to
meet your IT and business needs.
The HP Care Pack service for HP ProLiant BL c-Class server blades, cover the server blade and all HP
branded hardware options qualified for the server, purchased at the same time or afterwards, internal to
the server.
HP Care Pack services for the c7000 and c3000 enclosures cover the enclosure, power supplies and
fans. HP qualified rack options are covered by these services when installed within the same rack. HP
supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect
modules are also covered by the c7000 and c3000 enclosure Care Pack services.
NOTE:
NOTE SAN/Fabric switches for the HP c-Class BladeSystem are not covered under the c7000 enclosure
Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care Pack service level
support should always be uplifted to match existing storage or server service level.
To fully capitalize on your HP BladeSystem servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of multi vender support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation HP has a HP BladeSystem server
DA - 12810
North America — Version 6 — August 8, 2008
Page 9
QuickSpecs
HP BladeSystem c7000 Enclosure
HP BladeSystem c-Class Overview
support offer to help you speedily deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation, maintenance and management.
Support Service - 4-Hour Response Coverage, 3-Year, 24 x 7, Same Business Day
Deployment Service - Installation and Start Up for HP BladeSystem Infrastructure
Enhanced Service - Optimize service level to increase IT performance and availability
Support Service - HP Proactive BladeSystem Service, 1-Year
Deployment Service - Enhanced Network Installation and Start-up for HP BladeSystem Switches
Installation & Start-Up service for HP BladeSystem Infrastructure plus HP BladeSystem Enhanced Network
Installation and Start-UP as per the Customer Description and/or Data Sheet. To be delivered on a
scheduled basis 8am-5pm, M-F, excluding HP holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices
http://www.hp.com/go/proliant/carepack
DA - 12810
North America — Version 6 — August 8, 2008
Page 10
QuickSpecs
HP BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
For a complete configuration of the HP BladeSystem, please do the following:
Step 1: Select desired model, configuration and quantity of HP ProLiant server and Storage blades
NOTE: For server blade information, please visit:
http://h18000.www1.hp.com/products/quickspecs/north_america/12534.html
NOTE: For Storage Blade information, please visit:
http://h18000.www1.hp.com/products/quickspecs/12587_na/12587_na.html
Step 2: Determine quantity of HP BladeSystem c-Class Enclosures to purchase and choose Required Options (One of the
following from each list unless otherwise noted):
NOTE: Each HP BladeSystem c-Class Server Blade Enclosure holds up to 16 half-height blades. Server blanks will be shipped in all
empty bays.
Select Base Server Blade Enclosure Configuration
HP BladeSystem BLc7000 HP BLc7000 CTO Enclosure
c-Class Server Blade
NOTE: CTO model includes 1x Onboard Administrator, 4x Active Cool Fans and 0x
Enclosures
power supplies.
HP BLc7000 BCS CTO c-Class Enclosure
NOTE: CTO models include 1x Onboard Administrator, 4x Active Cool Fans and 0x
power supplies.
NOTE: All c-Class enclosures support HP ProLiant, Integrity and StorageWorks blades
in either mixed or homogenous configurations. The AD361B enclosure is suggested
for configurations primarily used with Integrity blades.
412152-B22
AD361B
Select Required Options (one of the following from each category unless otherwise noted)
c-Class Power Modules (1 HP BLc7000 Single Phase Power Module, FIO
per enclosure)
HP BLc7000 Three Phase Power Module, FIO
c-Class Power Supply
(Up to 6)
c-Class Active Cool Fan
(Up to 6)
HP BLc7000 -48V DC Power Input Module
HP c7000 Enclosure 2250W Hot-Plug Power Supply Option Kit
(supplied with 2m/6ft IEC C20 - C19 jumper cord)
NOTE: If Three Phase Power Module selected, a minimum of 3 Power Supply Option
Kits are needed. For full redundancy 6 Power Supply Option Kits are required
HP c7000 Enclosure 2250W Hot-Plug -48V DC Power Supply
NOTE: Only compatible with -48V DC Power Input Module
HP Active Cool Fan Option Kit
NOTE: A minimum of 4 Active Cool fans is required, 8 Active Cool fans can support
a full blade enclosure, 10 Active Cool fans should be ordered for reduced power
consumption and noise reduction.
NOTE: Single-Phase models may require additional power supplies. Fans should be
added to provide redundancy, reduce power consumption and reduce noise.
NOTE: Three-Phase models require a minimum of 6 Active Cool fans.
DA - 12810
North America — Version 6 — August 8, 2008
413379-B21
413380-B21
AH331A
412138-B21
AH332A
412140-B21
Page 11
QuickSpecs
HP BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
Step 3: Select optional software bundle (if nothing is selected system will ship with 16 ICE and ICE-LX Trial Licenses):
HP BLc7000 Insight Control Environment for Linux 16 License, including 1 year of
464432-B21
Enclosure Options
24x7 Technical Support and Updates, FIO
HP c-Class Insight Control Environment For BladeSystem 16 License, including 1 year
417688-B23
of 24x7 Technical Support and Updates, FIO
HP c-Class Insight Control Environment For BladeSystem 8 License, including 1 year
439034-B23
of 24x7 Technical Support and Updates, FIO
Step 4: Select optional Redundant Onboard Administrator Capability
HP c7000 Redundant Onboard Administrator Option
412142-B21
Step 5: Select an interconnect kit
A pair of interconnects must be ordered if redundancy is required. For additional information on Interconnect Options, please visit:
HP BladeSystem c-Class Interconnect QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12524_na/12524_na.html
HP BladeSystem
c-Class Network
Interconnects
HP BladeSystem
c-Class SAN
Interconnects
HP 1/10Gb-F Virtual Connect Ethernet Module
HP 1/10Gb Virtual Connect Ethernet Module
Ethernet Pass-Through Module for HP BladeSystem
Cisco Catalyst Blade Switch 3120X for HP
Cisco Catalyst Blade Switch 3120G for HP
Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem
GbE2c Ethernet Blade Switch for HP c-Class BladeSystem
HP 1:10 Gb Ethernet BL-c Switch
HP 10Gb Ethernet BL-c Switch
NOTE: The purchase the HP 10Gb Ethernet BL0c Switch, also requires the purchase
of one (1) HP NC512m Dual Port 10GbE Multifunction BL-c Adapter (P/N 440910B21) per server blade that requires 10Gbit support.
NOTE: The HP BladeSystem c-Class Network Interconnects ship as single units. The
above interconnects must be ordered in quantities of two for redundancy support.
HP 4Gb Virtual Connect Fibre Channel Module for c-Class BladeSystem
16 port FC Pass-thru Module for c-Class BladeSystem
Brocade 8/12c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch Power Pack for HP BladeSystem c-Class, Full Fabric
Brocade 8/12c SAN Switch 12-port Upgrade LTU
HP Brocade 4/12 SAN Switch
HP Brocade 4/24 SAN Switch Power Pack
HP Brocade 4/24 SAN Switch
HP Brocade 4/12 SAN Switch Upgrade LTU
Cisco MDS 9124e 12-port Fabric Switch
Cisco MDS 9124e 24-port Fabric Switch
Cisco MDS 9124e 12-port Upgrade LTU
DA - 12810
North America — Version 6 — August 8, 2008
447047-B21
399593-B22
406740-B21
451439-B21
451438-B21
410916-B21
410917-B21
438031-B21
445860-B21
409513-B21
403626-B21
AJ820A
AJ821A
AJ822A
T5517A
AE370A
AE371A
AE372A
AE373A
AG641A
AG642A
T5169A
Page 12
QuickSpecs
HP BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
HP BladeSystem
InfiniBand Interconnects
HP 4X DDR IB Switch Module for HP c-Class BladeSystem
410398-B21
Step 6: Select rack power distribution for single-phase models
NOTE: A pair of PDUs must be ordered for AC Feed redundancy.
HP Monitored Power
Distribution Unit
HP Modular Power
Distribution
Units
HP 17.3 kVA S348 Monitored PDU- single input, 3Ø, 48A
AF916A
HP 17.3 kVA Modular PDU, 48A 3Ø, Core Only
HP 8,3k VA Modular PDU 40 Amp Core Only
AF511A
252663-D75
HP 4.9kVA Modular PDU 24 Amp Core Only
NOTE: The Core Only Modular Power Distribution Unit Kits excludes the extension
bars as they are not required with the HP BladeSystem
HP Two C-13 PDU Extension Bars
NOTE: Each extension bar has a C19 input and 7 C13 receptacles. The option is
ideal for model S348, and, model S332, which both have only C19 outlets (12) and
for all Core Only Modular PDUs.
252663-D74
AF500A
Step 7: Select optional Power Cords for Single Phase Model (power cords are listed under options)
NOTE: Default power cord is a 6ft IEC C19 - C20 cord
PDU cords
(HP C19 to C20)
HP 16A IEC320-C19 to C20 1.2m/4ft PDU cord, Grey
HP 16A IEC320-C19 to C20 2m /6ft PDU cord, Grey
HP 16A IEC320--C19 to C20 2.5m/8ft PDU cord, Black
HP 16A IEC320-C19 to C20 4.5m/15ft PDU cord, Black
AF575A
AF574A
295633-B22
E7804A
Step 8: Select additional related options below
NOTE: Some options are not available for Factory integration. Contact HP or an Authorized HP Reseller for more information.
DA - 12810
North America — Version 6 — August 8, 2008
Page 13
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
HP BladeSystem
c-Class Server Blade
Enclosures
HP BLc7000 Single Phase Enclosure with 2 Power Supplies and 4 Fans with 16 Insight
Control Environment for Linux Licenses
HP BladeSystem c7000 Enclosure, Single-Phase with 2 Power Supplies, 4 Fans with
16 Insight Control Environment Licenses
HP BladeSystem c7000 Enclosure, Three-Phase with 6 Power Supplies, 6 Fans with 16
Insight Control Environment Licenses
HP BladeSystem c7000 Enclosure, Single-Phase with 2 Power Supplies, 4 Fans with 8
Insight Control Environment 30 Day Trial Licenses
HP BladeSystem c7000 Enclosure, Three-Phase with 6 Power Supplies,6 Fans with 8
Insight Control Environment 30 day Trial Licenses
NOTE: All c7000 BTO enclosures will ship with 12 server blanks. Additional server
blanks may be purchased if required. CTO enclosures will ship with the required
number of server blanks.
441908-B23
c7000 Enclosure Options HP c7000 Redundant Onboard Administrator Option
HP c7000 Enclosure 10K Rack Ship Bracket Option Kit
NOTE: The shipping bracket is required when shipping a c7000 enclosure when
installed in a rack. It is not required for normal operation.
HP BladeSystem Replacement Enclosure Miscellaneous Blanks kit (contains 1 each of
Power Supply Blank, Interconnect Module Blank, Onboard Administrator Blank, Active
Cool Fan Blank)
NOTE: This kit should only be ordered to replace lost or damaged blanks.
HP c-Class Server Blank and Coupler Option Kit (contains 1 x half-height server blank
with coupler)
NOTE: The coupler allows half-height server blanks to be coupled together to create
a full-height server blank.
NOTE: This kit should only be ordered to replace lost or damaged blanks.
HP c7000 Enclosure 2250W Hot-Plug Power Supply Option Kit (supplied with 2m/6ft
c7000 Power Options
IEC C20 - C19 jumper cord)
HP c7000 Enclosure 2250W Hot-Plug -48V DC Power Supply
HP BLc7000 -48V DC Power Input Module
c-Class Active Cool Fan HP Active Cool Fan Option Kit
NOTE: A minimum 4 Active Cool fans is required, 8 Active Cool fans can support a
full blade enclosure, 10 Active Cool fans should be ordered for reduced power
consumption and noise reduction.
HP 1/10Gb-F Virtual Connect Ethernet Module
HP BladeSystem
c-Class Network
HP 1Gb Virtual Connect Ethernet Module for c-Class BladeSystem
Interconnects
Ethernet Pass-Through Module for HP BladeSystem
Cisco Catalyst Blade Switch 3120X for HP
Cisco Catalyst Blade Switch 3120G for HP
Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem
HP GbE2c Ethernet Blade Switch for HP c-Class BladeSystem
HP GbE2c Layer 2/3 Ethernet Blade Switch
Cisco 10GBASE-CX4 X2 Module
412142-B21
433718-B21
DA - 12810
North America — Version 6 — August 8, 2008
403321-B22
412136-B22
403320-B22
412133-B22
412148-B21
412150-B21
412138-B21
AH332A
AH331A
412140-B21
447047-B21
399593-B22
406740-B21
451439-B21
451438-B21
410916-B21
410917-B21
438030-B21
459005-B21
Page 14
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
Cisco 10GBASE-SR X2 Module
Cisco 10GBASE-LX4 X2 Module
HP 10Gb SR XFP Module
HP 10Gb LR XFP Module
HP 1:10 Gb Ethernet BL-c Switch
HP BladeSystem c-Class Virtual Connect 1Gb SX SFP Option Kit
HP BladeSystem c-Class Virtual Connect 1Gb RJ-45 SFP Option Kit
HP 10Gb Ethernet BL-c Switch
NOTE: The purchase the HP 10Gb Ethernet BL0c Switch, also requires the purchase
of one (1) HP NC512m Dual Port 10GbE Multifunction BL-c Adapter (P/N 440910B21) per blade that requires 10Gbit support.
HP BladeSystem
c-Class SAN
Interconnects
HP BladeSystem
InfiniBand Interconnects
NOTE: The HP BladeSystem c-Class Network Interconnects ship as single units. The
above interconnects must be ordered in quantities of two for redundancy support.
HP 4Gb Virtual Connect Fibre Channel Module for c-Class BladeSystem
16 port FC Pass-thru Module for c-Class BladeSystem
Brocade 8/12c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch for HP BladeSystem c-Class, Full Fabric
Brocade 8/24c SAN Switch Power Pack for HP BladeSystem c-Class, Full Fabric
Brocade 8/12c SAN Switch 12-port Upgrade LTU
HP Brocade 4/12 SAN Switch
HP Brocade 4/24 SAN Switch Power Pack
HP Brocade 4/24 SAN Switch
HP Brocade 4/12 SAN Switch Upgrade LTU
Cisco MDS 9124e 12-port Fabric Switch
Cisco MDS 9124e 24-port Fabric Switch
Cisco MDS 9124e 12-port Upgrade LTU
HP 4X DDR IB Switch Module for HP c-Class BladeSystem
DA - 12810
North America — Version 6 — August 8, 2008
459006-B21
459007-B21
443756-B21
443757-B21
438031-B21
453151-B21
453154-B21
445860-B21
409513-B21
403626-B21
AJ820A
AJ821A
AJ822A
T5517A
AE370A
AE371A
AE372A
AE373A
AG641A
AG642A
T5169A
410398-B21
Page 15
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
HP Insight Control
Environment for
BladeSystem
Management Suite
NOTE: Electronic licensing options are available for Insight Control suites software
products. Please see the appropriate Insight Control QuickSpecs for additional
information.
Insight Control Environment for HP BladeSystem
HP Insight Control Environment for BladeSystem, No Media 1-Server License including
1 year of 24x7 Technical Support and Updates
NOTE: Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service.
HP Insight Control Management Software Media Kit
NOTE: Insight Control Management DVD media without licenses. Contains Insight
Manager and Essentials software products and components licensed by Insight
Control Management suites. Uses an integrated installer to perform quick and
accurate software installation and updates.
NOTE: Contains 1 license for each of RDP, PMP, VPM, IPM and iLO Select. Includes
one year of 24 x 7 HP Software Technical Support and Update Service.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Insight Control Environment for Linux
HP Insight Control Environment for Linux, No Media, 1-Server License including 1
year of 24x7 Technical Support and Updates
NOTE: This part number can be used to purchase one (1) license with a single
activation key. Customer will receive a printed license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online or via
fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service. One certificate is shipped for each
license.
HP Insight Control Environment for Linux Media Only Kit
NOTE: This optional Media pack CD contains the ISO image for HP Insight Control
Environment for Linux, HP System Insight Manager, and an integrated installer. Servers
must be acquired separately. This Media pack is optional because the latest ISO
image and latest updates may be downloaded at no cost from:
http://www.hp.com/go/ice-linux (click on Download button).
NOTE: For additional HP Insight Control Environment for Linux License Kits, please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
iLO Power Management Pack for BladeSystem
HP iLO Power Management Pack for BladeSystem, No Media, 1-Server License
including 1 year of 24x7 Technical Support and Updates
NOTE: This option kit includes 1 license for iLO Select and Insight Power Manager.
Customer will receive a printed license entitlement certificate via physical shipment.
The license entitlement certificate must be redeemed online or via fax in order to
obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support and Update Service.
NOTE: For additional -HP Insight Power Manager Packs please see the QuickSpecs
at: http://h18000.www1.hp.com/products/quickspecs/12632_na/12632_na.html
DA - 12810
North America — Version 6 — August 8, 2008
453484-B21
436222-B21
464423-B21
464422-B21
442937-B21
Page 16
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
Server Management
Stand Alone Software
Product - ProLiant
Essentials
Deploy
ProLiant Essentials Rapid Deployment Pack
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License including 1
year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via RDP. Customer
will receive a printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain the
license activation key(s). Includes one year of 24 x 7 HP Software Technical Support
and Update Service.
NOTE: For additional ProLiant Essentials Rapid Deployment Pack License Kits- please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html
HP Server Migration Pack - Universal Edition
HP Server Migration Pack - Universal Edition, No Media, Physical / Virtual to ProLiant
Single Migration License, including 1 year of 24x7 Technical Support
NOTE: This license allows 1 physical to ProLiant or virtual to ProLiant migration.
Customer will receive a printed license entitlement certificate and documentation via
physical shipment. The license entitlement certificate must be redeemed online or via
fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support Service.
NOTE: For additional HP Server Migration - Universal Edition License Kits, please see
the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12855_na/12855_na.html
Monitor
HP Insight Dynamics - VSE
HP Insight Dynamics-VSE without Insight Control Environment, 1-server license
including 1 year of 24x7 Technical Support and Updates
NOTE: This license supports HP ProLiant ML/DL and c-Class Blade servers. Customer
will receive via email a receipt and link to a license entitlement certificate.
HP Insight Dynamics-VSE with Insight Control Environment, 1-server license including
1 year of 24x7 Technical Support and Updates
NOTE: This license supports HP ProLiant c-Class Blade servers. Customer will receive
a printed license entitlement certificate via physical shipment.
NOTE: For additional HP Insight Dynamics-VSE licenses, please see the QuickSpecs
at: http://h18000.www1.hp.com/products/quickspecs/13050_na/13050_na.html
HP Virtual Connect
Enterprise Manager
HP Virtual Connect Enterprise Manager for BL-c7000, No Media, 1-Enclosure License
including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 BL-c7000 enclosure to be managed with VCEM.
Customer will receive a printed license entitlement certificate via physical shipment.
The license entitlement certificate must be redeemed online or via fax to obtain the
license activation key(s). Includes one year of 24 x 7 HP Software Technical Support
and Update Service.
NOTE: For additional information regarding the HP Virtual Connect Enterprise
Manager License kits, please visit:
http://h18000.www1.hp.com/products/quickspecs/12860_na/12860_na.html
DA - 12810
North America — Version 6 — August 8, 2008
452151-B21
460750-B21
483531-B21
483534-B21
459864-B21
Page 17
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
HP c-Class Storage
Blades
HP StorageWorks SB40c storage blade
HP PCI Express Mezzanine pass-thru card for HP BladeSystem
NOTE: The mezzanine card is needed to support the SB40c storage blade (P/N
411243-B21) with HP c-Class BladeSystem full-height server blades.
411243-B21
431643-B21
HP PCI Expansion Blades PCI Expansion Blade
NOTE: For additional information regarding the HP PCI Expansion Blade, please visit:
http://h18000.www1.hp.com/products/quickspecs/12753_na/12753_na.html
HP PCI Express Mezzanine pass-thru card for HP BladeSystem
NOTE: The mezzanine card is needed to support the SB40c storage blade (P/N
411243-B21) with HP c-Class BladeSystem full-height server blades.
448018-B21
HP c-Class Tape Blades
HP Ultrium 448c Tape Blade
HP StorageWorks SB920c Tape Blade
HP PCI Express Mezzanine pass-thru card for HP BladeSystem
NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem (431643B21) is required when installing a tape blade adjacent to a full-height server blade
NOTE: For additional information regarding the HP Ultrium 448c Tape Blade, please
visit: http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
440947-B21
AJ401A
431643-B21
HP StorageWorks All-inOne Storage Systems
HP StorageWorks AiO SB600c Storage Blade - 1.16TB
NOTE: Shared storage blade for server blades within the enclosure. The SB600c can
be either NAS (file-based shared storage or iSCSI Shared Storage connected to server
blades within the enclosure using an Ethernet switch in the enclosures interconnect
bays.
StorageWorks Storage Mirroring for AiO Edition 1 LTU
NOTE: This optional software is for mirroring data between AiO Storage blades in
different locations. This is host-based data replication software for disaster recovery
and data protection.
NOTE: Order 1 unit for each AiO SB600c Storage Blade.
NOTE: For additional information regarding the HP StorageWorks All-in-One Storage
Systems, please visit:
http://h18000.www1.hp.com/products/quickspecs/12786_na/12786_na.html
AG780A
DA - 12810
North America — Version 6 — August 8, 2008
431643-B21
T5321A
Page 18
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
Power Cords
HP LV Power Cords 100 - 120V AC
HP 15A 125V NEMA 5-15P/IEC320-C19 3.6m/12ft
HP 18A 125V NEMA 5-20P/NEMA L5-20p 4.5m/15ft
HP C19 - C20 Jumper Cords
HP 16A IEC320-C19 to C20 1.2m/4ft, PDU cord, Flint Gray
HP 16A IEC320-C19 to C20 2m/6ft, PDU cord, Flint Gray
HP 16A IEC320--C19 to C20 2.5m/8ft PDU cord, Black
HP 16A IEC320-C19 to C20 4.5m/15ft, PDU cord, Black
HP HV Power Cords 200 - 240V AC
HP 16A 250V L6-30P/IEC320-C19 4.5m/15ft
HP 16A 250V NEMA L 6-20P/IEC320-C19 3.6m/12ft
HP 16A 250V stripped end/IEC320-C19 4.5m /15ft
HP Single Phase UPS
HP 3-Phase UPS
HP R5500 VA 3U UPS
NOTE: For more information on the R5500 please consult the Quickspecs at:
http://h18000.www1.hp.com/products/quickspecs/11871_na/11871_na.html
HP R8000/3 Uninterruptible Power System 6U
HP R12000/3 Uninterruptible Power System 6U
NOTE: For more information on the HP 3-Phase UPS products please consult the
Quickspecs at:
http://h18004.www1.hp.com/products/quickspecs/12857_na/12857_na.html
HP Rack 10000 G2
10622 G2 (22U) Rack Cabinet Shock
Series (Graphite Metallic) 10622 G2 (22U) Rack Cabinet Pallet
10642 G2 (42U) Rack Cabinet - Pallet
10642 G2 (42U) Rack Cabinet - Shock Pallet
10642 G2 (42U) Rack Cabinet - Crated
10642 G2 (42U) Rack Cabinet, with Extension - Shock Pallet
10642 G2 (42U) Rack Shock Pallet- for field racking
10636 G2 (36U) Rack Cabinet - Shock Pallet
10636 G2 (36U) Rack Cabinet - Crated
10636 G2 (36U) Rack Cabinet, with Extension - Shock Pallet
10636 G2 (36U) Rack Cabinet, without door - Shock Pallet
10647 G2 (47U) Rack Cabinet - Pallet
10842 G2 (42U) Rack Cabinet Shock
10842 G2 (42U) Rack Cabinet Pallet
NOTE: Please see the Rack 10000 G2 QuickSpecs for additional part numbers and
Technical Specifications such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.html
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
DA - 12810
North America — Version 6 — August 8, 2008
235603-001
E7802A
AF575A
AF574A
295633-B22
E7804A
E7805A
340653-001
E7806A
AF426A
AF431A
AF429A
AF022A
AF021A
AF001A
AF002A
AF003A
AF004A
AF007A
AF011A
AF012A
AF013A
AF014A
AF031A
AF042A
AF041A
Page 19
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
Tape Libraries
The following options are supported in an Enterprise Backup Solution (EBS)
environment with the HP BladeSystem c-Class enclosure. Please visit:
http://www.hp.com/go/ebs for complete compatibility details.
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 4GB FC Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 4GB FC Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SCSI Drive Library
HP StorageWorks MSL2024 2 LTO-3 Ultrium 920 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-2 Ultrium 448 SCSI Drive Library
HP StorageWorks MSL2024 2 LTO-2 Ultrium 448 SCSI Drive Library
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 SCSI Drive Library
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1840 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 4GB FC Library
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1840 4GB FC Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SCSI Tape Library
HP StorageWorks MSL4048 2 LTO-3 Ultrium 920 SCSI Tape Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 4GB FC Library
HP StorageWorks MSL4048 2 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL4048 2 LTO-3 Ultrium 960 4GB FC Library
NOTE: Please reference the MSL Tape Library QuickSpecs at:
http://www.hp.com/go/automation for additional information needed to create a
complete solution; reference current compatibility information at:
http://www.hp.com/go/ebs.
HP StorageWorks Virtual Library Systems
HP StorageWorks 12000 Virtual Library System Gateway Base Library
HP StorageWorks 9030 Virtual Library System
HP StorageWorks 6218 Virtual Library System
HP StorageWorks 6227 Virtual Library System
HP StorageWorks 6636 Virtual Library System
HP StorageWorks 6653 Virtual Library System
NOTE: Please reference the Virtual Library Systems QuickSpecs at:
http://www.hp.com/go/automation for additional information needed to create a
complete solution. Reference current compatibility information at:
http://www.hp.com/go/ebs.
DA - 12810
North America — Version 6 — August 8, 2008
AJ033A
AJ034A
AG115A
AG326B
AH169A
AH170A
AG116A
AG117A
AJ035A
AJ037A
AJ036A
AJ038A
AH171A
AH172A
AG322A
AG324B
AG323A
AG325B
AH814A
AG306A
AH809A
AH810A
AH811A
AH812A
Page 20
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
Rack Options for Rack
10000 G2 Series
HP Modular Cooling
System
HP 10642 G2 Front Door ALL
HP 10636 G2 Front Door ALL
10642 G2 (42U) Side Panels (set of two) (Graphite Metallic)
10636 G2 (36U) Side Panels (set of two) (Graphite Metallic)
10642 Rear Extension Kit
10636 G2 Rear Extension Kit
600mm G2 Stabilizer Option Kit (Graphite)
600mm G2, Heavy Duty Stabilizer Option Kit (Graphite)
800mm G2, Heavy Duty Stabilizer Option Kit (Graphite)
NOTE: Supports 10000 G2 Series only.
HP 10000 G2 Rack Grounding Kit
AF009A
AF019A
AF054A
AF056A
AF058A
AF060A
AF062A
AF064A
AF068A
600W 10K G2 Rack Tie Down
NOTE: For additional information regarding Rack Options, please see the following
URL: http://www.hp.com/go/rackandpower.
AF076A
HP Modular Cooling System
AF098A
AF074A
Monitors and Keyboards TFT7600 Rackmount Keyboard Monitor
1U Rackmount Keyboard with USB
NOTE: For additional information regarding Rack Options, please see the following
URL: http://www.hp.com/go/rackandpower.
AG052A
AG072A
HP KVM Switch Options
AF601A
AF602A
AF600A
AF604A
2x1x16 IP Console Switch with Virtual Media
4x1x16 IP Console Switch with Virtual Media
2x16 Server Console Switch with Virtual Media
PS/2 Virtual Media Interface Adapter, 1 pack
NOTE: Requires PS/2 and one USB port on server.
BladeSystem c-Class KVM Interface Adapter - 1 pack
HP 1x8 Server Console Switch
HP 2x16 Server Console Switch
PS/2 Interface Adapter, 1-pack
PS/2 Interface Adapter, 8-pack
NOTE: Cat5e cables are required to connect Interface Adapters to Consoles
Switches. Cat52 cables can be found at the following URL:
http://www.hp.com/go/kvm
HP 1x4 Console Switch
HP PS2 Server Console Cable, 6 foot, 2-Pack
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE: required for supporting USB peripherals.
HP USB KVM Cable with audio, 6'-2-pack
DA - 12810
North America — Version 6 — August 8, 2008
AF605A
336044-B21
336045-B21
262588-B21
262587-B21
AF611A
AF612A
AF613A
371729-B21
Page 21
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
NOTE For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm
HP Serial Console Server HP 16 Port Serial Console Server
Options
HP 48 Port Serial Console Server
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console
Servers. Additional Serial Adapters and Cat5e cables can be found at the following
URL: http://www.hp.com/go/kvm.
AF101A
AF102A
AF103A
AF110A
NOTE: For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm.
Service and Support
Offerings
(HP Care Pack Services)
NOTE: HP Care Pack services for the c7000 Enclosure cover the enclosure, power
supplies and fans. HP qualified rack options are covered by these services when
installed within the same rack. HP supported c-Class enclosure devices including pass
thru, Ethernet interconnect and virtual connect modules are also covered by the
c7000 enclosure Care Pack services.
NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered under
the c7000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs.
SAN/Fabric Switch Care Pack service level support should always be uplifted to match
existing storage or server service level.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
NOTE: Uplifts the Ethernet devices to the same level of service as the c-class
enclosure
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Insight Control Environment for Linux SW
Updates, SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time
including. HP holidays, Electronic
Onsite HW support 24x7, 4hr response and Insight Control Environment for
BladeSystem SW Updates, SW Tech support offsite, onsite at HP's discretion, 24x7 2hr
response time including. HP holidays, Electronic
Onsite HW support 24x7, 4hr response and Insight Control Data Center Edition SW
Updates, SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time
including. HP holidays, Electronic
Installation & Start-up Services
HP BladeSystem c7000 Infrastructure Installation and Startup Service for Blade
Hardware and Insight Control Software, Electronic
DA - 12810
North America — Version 6 — August 8, 2008
UE477E
UE478E
UE479E
UE480E
UK137E
UH322E
UH323E
UE602E
Page 22
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
HP BladeSystem C7000 Enhanced Network Installation and Startup Service, Electronic
ProLiant BL c-Class Enclosure and Blade Hardware Installation, Electronic
ProLiant BL c-Class Blade Server Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/bladesystemservices
NOTE: The HP Care Pack service part numbers below covers the HP Brocade 4Gb,
12 Port SAN Switch and Brocade 4/24/ SAN Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UE603E
UE494E
UE493E
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
NOTE: The HP Care Pack service part numbers below covers the Brocade 4/24 SAN
Switch Power Pack.
Hardware Services On-site Service
Support Plus
Onsite HW support, 8am-9pm, M-F, 4hr response and SW Tech support offsite,
onsite at HP's discretion, 8am-9pm, M-F 2hr response time excluding HP holidays,
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and SW Tech support offsite, onsite at HP's
discretion, 24x7 2hr response time including HP holidays, Electronic
NOTE: The HP Care Pack service part numbers below covers the HP Cisco MDS
9124e 12 port and 24 port Fabric Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
Software Installation and StartUp Services
Provides for the Installation and Start-up of ProLiant Essentials Rapid Deployment
Pack, Electronic
NOTE: Provides installation on a Customer supplied server designated as a
Deployment Server. Includes the deployment of a single server. This new server will be
deployed using either one of the pre-configured scripts or an image. In addition, the
service will provide for the capture and storage of the configuration of the newly
deployed server and orientation on product usage. To be delivered during standard
office ours, standard office days.
Provides for the Installation and Start-up of Rapid Deployment Pack Implementation of
Rapid Deployment Pack (Basic) (Electronic)
Provides for the Installation and Start-up of System Insight Manager (Electronic)
UE439E
DA - 12810
North America — Version 6 — August 8, 2008
UE436E
UE437E
UE438E
U5988E
UE728E
UE729E
UF313E
UF972E
UF973E
UF974E
U5988E
U5683E
UA042E
UA041E
Page 23
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
Provides for the Installation and Start-up of System Insight Manager Agents (Electronic)
Provides for the Installation and Startup of Insight Control Environment for Linux
Provides for the Installation and Startup of Virtual Machine Management & Server
Migration Pack
Software Operating Environment Care Packs
1 Year Microsoft operating environment software support 24x7 - 10 incidents
1 Year Red Hat operating system software support 24x7 - 10 incidents
1 Year SuSE operating system software support 24x7 - 10 incidents
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/hps/carepack/services/
BCS Flexible Care Packs Integrity blade server enclosure
NOTE: HP Care Pack services for the c7000 Enclosure cover the enclosure, power
supplies and fans. HP qualified rack options are covered by these services when
installed within the same rack. HP supported c-Class enclosure devices including pass
thru, Ethernet interconnect and virtual connect modules are also covered by the
c7000 enclosure Care Pack services.
NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered under
the c7000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs.
SAN/Fabric Switch Care Pack service level support should always be uplifted to match
existing storage or server service level.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
NOTE: Uplifts the Ethernet devices to the same level of service as the c-class
enclosure.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Support Plus
Support Plus Service, 5-Day x 13-Hour Coverage
Support Plus 24
Support Plus 24 Service
Proactive 24 Service - Mission Critical proactive environment 24x7 4hr onsite HW
support
Critical Service - Mission Critical proactive environment 6-Hour Call-to-Repair onsite
HW support
Installation & Start-up Services
HP BladeSystem c7000 Infrastructure Installation and Startup Service for Blade
Hardware and Insight Control Software, Electronic
NOTE: The HP Care Pack service part numbers below covers the HP Brocade 4Gb,
12 Port SAN Switch and Brocade 4/24 SAN Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
DA - 12810
North America — Version 6 — August 8, 2008
UA040E
UF372E
UD546E
U9269E
U3408E
U9936E
HA101A3#6Q6
HA103A3#6Q6
HA104A3#6Q6
HA105A3#6Q6
HA109A3#6Q6
HA110A3#6Q6
HA111A3#6Q6
HA112A3#6Q6
HA114A1#57A
HA101A3#85J
HA103A3#85J
HA104A3#85J
Page 24
QuickSpecs
HP BladeSystem c7000 Enclosure
Related Options
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
NOTE: The HP Care Pack service part numbers below covers the Brocade 4/24 SAN
Switch Power Pack.
Hardware Services On-site Service
Support Plus
Onsite HW support, 8am-9pm, M-F, 4hr response and SW Tech support offsite,
onsite at HP's discretion, 8am-9pm, M-F 2hr response time excluding HP holidays,
Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and SW Tech support offsite, onsite at HP's
discretion, 24x7 2hr response time including HP holidays, Electronic
NOTE: The HP Care Pack service part numbers below covers the HP Cisco MDS
9124e 12 port and 24 port Fabric Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/hps/carepack/services/
DA - 12810
North America — Version 6 — August 8, 2008
HA105A3#85J
HA113A1#5D2
HA109A3#85K
HA110A3#85K
HA101A3#87L
HA103A3#87L
HA104A3#87L
HA105A3#87L
HA113A1#5D2
Page 25
QuickSpecs
HP BladeSystem c7000 Enclosure
Storage
Figure 1
Installing a tape blade adjacent to a half-height
server blade.
HP StorageWorks Ultrium 448c & 920c Tape Blades
Description
Quantity
Position
Supported
Supported
HP Ultrium Tape Blades
Up to 8 per HP Odd or Even slots
NOTE: Connected
BladeSystem cnext to partner
adjacent to a half-height
Class c7000
server blade
server blade (Figure 1)
Enclosure
HP Ultrium Tape Blades
NOTE: Connected
adjacent to a full-height
server blade (Figure 2)
Up to 4 per HP Slots 10, 12, 14,
BladeSystem cor 16
Class c7000
(lower bays only)
Enclosure
DA - 12810
Figure 2
Installing a tape blade adjacent to a full-height
server blade.
Comments
A tape blade supports one partner server blade, and one
partner server blade supports one tape blade.
Identify the partner server blade to be installed with the HP
Ultrium 448c Tape Blade. The two blades always occupy a
pair of slots, as follows: 1 & 2, 3 & 4, 5 & 6, 7 & 8, 9 & 10,
11 & 12, 13 & 14, 15 & 16.
If the partner server blade is installed in an odd-numbered
bay, the HP Ultrium 448c Tape Blade is installed in the
adjacent even-numbered bay to the right.
If the partner server blade is installed in an even-numbered
bay, the HP Ultrium 448c Tape Blade is installed in the
adjacent odd-numbered bay to the left.
A tape blade supports one partner server blade, and one
partner server blade supports one tape blade.
When partnering a tape blade with a full height server blade,
an HP PCI Express Mezzanine Pass-Thru Card for
BladeSystem c-Class (431643-B21) is required. This card is
installed in mezzanine 3 connector in the server blade.
Identify the partner server blade to be installed with the HP
Ultrium 448c Tape Blade. The two blades always occupy a
pair of slots, as follows: 9 & 10, 11 & 12, 13 & 14, 15 & 16.
The partner server blade is installed in an odd-numbered
North America — Version 6 — August 8, 2008
Page 26
QuickSpecs
HP BladeSystem c7000 Enclosure
Storage
bay. The HP Ultrium 448c Tape Blade is installed in the
adjacent even-numbered bay to the right.
The tape blade is always located on the lower row of the
enclosure in an even-numbered bay (slots 10, 12, 14 or 16)
DA - 12810
North America — Version 6 — August 8, 2008
Page 27
QuickSpecs
HP BladeSystem c7000 Enclosure
Technical Specifications
Server Blade and Fan Population Guidelines
Fan bay numbering
Fans must be placed in the following bays
Number of Fans
Fan Bays Used
4
4, 5, 9, 10
6
3, 4, 5, 8, 9, 10
8
1, 2, 4, 5, 6, 7, 9, 10
10
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
NOTE: For correct operation fans and server blades must be installed in the correct bays. The Onboard Administrator will ensure
that fans and blades are correctly placed before allowing systems to power on.
DA - 12810
North America — Version 6 — August 8, 2008
Page 28
QuickSpecs
HP BladeSystem c7000 Enclosure
Technical Specifications
Half-height server blade bay numbering
1. Device Bay 1
9. Device Bay 9
2. Device Bay 2
10. Device Bay 10
3. Device Bay 3
11. Device Bay 11
4. Device Bay 4
12. Device Bay 12
5. Device Bay 5
13. Device Bay 13
6. Device Bay 6
14. Device Bay 14
7. Device Bay 7
15. Device Bay 15
8. Device Bay 8
16. Device Bay 16
NOTE: Half-height servers should be populated from top and bottom from left to right from the front of the enclosure. So the first
two half-height servers would be placed in bays 1 & 9 the second two half-height servers would be placed in bays 2 & 10 and so on
until the enclosure is full.
Full-height server blade bay numbering
1. Device Bay 1
2. Device Bay 2
3. Device Bay 3
4. Device Bay 4
5. Device Bay 5
6. Device Bay 6
7. Device Bay 7
8. Device Bay 8
DA - 12810
North America — Version 6 — August 8, 2008
Page 29
QuickSpecs
HP BladeSystem c7000 Enclosure
Technical Specifications
NOTE: Full-height servers should be populated from left to right.
Mixed Configuration - Full Height and Half-Height Population rules
The c7000 enclosure is divided into 4 quadrants by the vertical support metalwork. Within each quadrant a removable divider is
used to support half height devices. To install a full-height blade in any quadrant this divider must be removed. As a consequence a
quadrant can only contain either full-height server blades or half-height server blades.
NOTE: Storage blades and Tape blades can be installed in the same quadrant as both full-height and half-height blades, a bracket
ships with each SB40c/Tape Blade that allows a half-height blade to be mounted on top of the storage blade.
NOTE: The lower tape or storage blade cannot be removed without first removing the upper half height blade.
HP BladeSystem
c7000 Server Blade
Enclosure
Dimensions
Shipping Dimensions
Single Phase Enclosure
Weight
Three -Phase Enclosure
Weight
DC Input Enclosure
Weight
Max Enclosure Weight
Temperature Range
DA - 12810
Height
Width
Depth
Height
Width
Depth
Unboxed
Shipping
Unboxed
Shipping
Unboxed
Shipping
Unboxed
Shipping
Operating
Non-Operating
17.4 in (442 mm)
17.5 in (445 mm)
32 in (813 mm)
29.88 in (759 mm)
23.88 in (607 mm)
39.88 in (1013 mm)
192 lb (87 Kg)
235 lb (106.6 Kg)
222 lb (100.7 Kg)
265 lb (120.2 Kg)
151 lb (68.5 Kg)
194 lb (88 Kg)
450 lb (204 Kg)
493 lb (223.6 Kg)
50° to 95° F (10° to 35° C)
-22° to 140° F (-30° to 60° C)
North America — Version 6 — August 8, 2008
Page 30
QuickSpecs
HP BladeSystem c7000 Enclosure
Technical Specifications
Relative Humidity
(non-condensing)
Operating
20% to 80%
Non-Operating
5% to 95%
Wet Bulb Temperature
Operating
82.4° F (28° C)
Non-Operating
101.7° F (38.7° C)
NOTE: Operating temperature has an altitude derating of 1.8° F (1° C) per 1,000 ft (304.8 m). No
direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating
limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a
maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Power
Input Requirements Single Phase Model
Input Requirements DC
Power
Output
Specifications
Acoustic Noise
DA - 12810
100 to 120 VAC
200 to 240 VAC
Rated input frequency
Rated input current
per power supply
50 to 60 Hz
12.6 A at 208 VAC
11.9 A at 220 VAC
13.1 A at 200 VAC
2612 VA Max
Rated input power
per power supply
Rated input voltage
Input Requirements Three Phase Model
Power Cords
Rated input voltage
200 to 208 VAC Line to Line
3-Phase Delta
Rated input frequency
50 to 60 Hz
Max input current per line 22.6A at 200 VAC
cord
21.8A at 208 VAC
20.6A at 220 VAC
Max input power
7836VA Max
per line cord
Rated Input Voltage
36 to -72 VDC
Max Input Current per line 75A
cord
Max Input Power per line 2700W
Cord
Single Phase
IEC-320 C19-C20 1.22m (4 ft)
3-Phase
2 x NEMA L15-30p 2.44m(10 ft)
-48V DC Power
Terminal lug: 45DG 4AWG 1/4 2H
Two-hole lug
45 degree bend
0.25in. (6.4mm) stud hole size
0.63in. (16mm) hole spacing
Per Power Supply
200 - 240 VAC 2250 W
100 - 120 VAC 960 W
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
North America — Version 6 — August 8, 2008
Page 31
QuickSpecs
HP BladeSystem c7000 Enclosure
Technical Specifications
Option Kits
LWAd
LpAm
Operating
LWAd
LpAm
7.5 Bels
57 dB
Power Supply Option
Shipping Dimensions
Height
Width
Depth
Weight
8.75 in (223 mm)
8.63 in (219 mm)
35.13 in (892 mm)
8.5 lbs (3.85 Kg)
Fan Option Shipping
Dimensions
Height
Width
Depth
Weight
Height
Width
Depth
Weight
8.75 in (223 mm)
9.75 in (248 mm)
15.88 in (403 mm)
4.0 lbs (1.8 Kg)
2.50 in (63.5 mm)
9.88 in (251 mm)
13.50 in (343 mm)
4.0 lbs (1.8 Kg)
Onboard Administrator
Option Shipping
Dimensions
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
7.5 Bels
57 dB
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
DA - 12810
North America — Version 6 — August 8, 2008
Page 32
QuickSpecs
HP BladeSystem c7000 Enclosure
Power Specifications
NOTE:
To review maximum system power ratings for facilities planning purposes use the Active Answers Power Calculator which is available
via the online tool located at URL: http://www.hp.com/go/bladesystem/powercalculator
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
AMD Opteron™ is a US registered trademark of AMD Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 12810
North America — Version 6 — August 8, 2008
Page 33