Instruction Manual
15,000 BTU Portable Air
Model: HYAC15
Please read and follow the instructions in this user manual even if you feel you are familiar with the
product, and find a place to keep it handy for future reference.
For your convenience record the complete model number (located on the product identification plate)
and the date you received the product, together with your purchase receipt and attach to the warranty
and service information. Retain in the event that warranty service is required.
NOTE: The rating of this product (as marked on the product identification plate) is based on specific
loading tests. Normal use or the use of other recommended attachments may draw significantly less
When using any electrically powered product, basic safety precautions should always be followed,
including the following:
WARNING!: - to reduce the risk of fire, electrical shock or injury to persons or property:
Read all instructions.
Always operate the product from a power source of the same voltage, frequency and rating as
indicated on the product identification plate.
Disconnect the power plug before dismantling, assembling or before cleaning.
Avoid touching mobile parts of the appliance.
Do not use the appliance for any other purpose other than its intended use.
Do not operate this product with a damaged cord or plug, or after the product malfunctions, or
appears damaged in any way. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
This appliance is for indoor use only.
Keep the appliance away from heat sources, and direct sunlight.
Never insert fingers, pencils, or any other objects through the air vent guards whenever the
power plug is connected, especially while running.
Always switch off the appliance before unplugging it.
The appliance is not intended for use by young children or infirm persons unless they have been
adequately supervised by a responsible person to ensure that they can use the unit safely.
This appliance is not to be used by children or persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge unless they have been given supervision or
Young children should be supervised to ensure that they do not play with the appliance.
When using the appliance never leave the appliance unsupervised when in use. Switch off the
appliance if you have to leave for even a short period of time.
Never use the mains point switch as a switch to start and turn off the air conditioning unit. Use
the provided On/Off switch located on the control panel.
Always place the portable air conditioner on a dry stable surface.
The appliance shall not be installed in the laundry.
The appliance must be positioned so that the plug is accessible. And it shall be in accordance
with national wiring regulations.
The air conditioning unit must always be stored and transported upright, otherwise you may cause
irreparable damage to the compressor; in case of any doubt after moving the appliance we
suggest to wait for at least 24 hours before you start the air-conditioning unit.
Always unplug the appliance before cleaning or changing any parts of the appliance, or when it’s
not in use.
Never immerse the appliance in water or any other liquid.
The appliance must not be used if the guards are not fastened according to instructions.
Do not use your appliance with an extension cord unless it has been checked and tested by a
qualified electrician or electrical supplier.
The air conditioning unit must always be stored and transported upright, otherwise you may
cause irreparable damage to the compressor; in case of doubt wait at least 24 hours before you
start the air-conditioning unit.
Avoid restarting the air conditioning unit unless 4 minutes have passed, since being turned off,
or the compressor may get damaged.
The plug should be well secured and not damaged.
Do not plug in the appliance with an adaptor.
Plug into the wall socket before switching on the appliance, and then press the ON/OFF button.
Special Recommendations
Ensure that the appliance is positioned on a flat, large, dry surface without any obstacles nearby.
A minimum distance from furniture and walls is 50cm in all directions.
The plug should be easily accessible.
In order to maintain the function of the compressor, the appliance should always be in a vertical
Do not use the appliance near gas or other flammable liquids.
Do not block the air outlet, inlet grills or the air inlet ventilation.
Do not use spray (insecticides, paint) or any other flammable products near the appliance as the
plastic may become deformed. The unit may also sustain electrical damage.
Energy Saving Tips
Keep blinds and /or draperies, on any windows, closed during the sunniest part of the day.
Keep the filters clean. Under normal conditions, the filters should be cleaned every 2 weeks.
Since the filters remove airborne particles, more frequent cleaning may be necessary, depending
on the indoor air quality.
Set the fan speed switch to high cool and the thermostat to the coolest position for the initial
start-up, then set the Fan switch to Low cool and lower the thermostat to a comfortable setting.
If you want to get better effect, we suggest you not to use cooling function when ambient environment
is higher than 35°C.
If the supply power cord is damaged, the power cord must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
This product has not been designed for any uses other than those specified in this booklet.
Before use, remove all packaging and inspect the appliance for any damage. If there appears to be any
damage, please take the unit back to place of purchase for a replacement.
Tope cover
Air outlet grille
Control panel
Front cover
Power cord
Drain port
9. Up filter frame
10. Protective net
11. Down filter frame
12. Water plug
13. Remote control
14. Exhaust hose
15. Window kits
16. Hose adaptor
WARNING: Before using this unit, please keep it upright at least 2 hours.
The unit can be moved easily among the rooms, but please note the following:
1. Assemble hose adaptor (Figure 1).
Part A
Part A + Part B
Figure 1
Part B
a. Prepare the separate parts of the hose adaptor (Part A & Part B); they are almost same on
the structure.
b. With each hand, hold one part so you can connect them easily.
Remarks: Don’t push too hard when connecting together, to prevent damage.
2. Assembly of the exhaust hose (Figure 2).
Figure 2
a. Lengthen one head of the hose; screw it into the unit anti-clockwise.
Remarks: Screw it to its place, no less than three circles.
b. The same way to connect the hose to the assembled adaptor (At least three circles).
3. Installation of window kits. Partially open the window and then fix the window kits to the
window (Figure 3 & 4 below).
The window kits can be installed on most normal and vertical windows, and it is adjustable.
Figure 3
Figure 4
4. Please make sure the unit is upright. The unit should be placed on the even floor with the
minimum distance 50cm away from furniture and walls (Figure 5).
Figure 5
Fix the other end of the heat- exhausted hose to the air-outlet window kit (Figures 6 & 7).
Figure 6
Figure 7
Important Safeguards
The length of the outlet hose is from 280mm to 1500mm which bases on the unit. The air-exhaustion
must be well ventilated, if not, may cause the unit to overheat.
NOTE: Always use the hose that comes with the unit, any other hose that is not compatible with the unit
will overheat the unit.
This unit HYAC15 (Cooling model only) has two functions: cooling and fan.
Fan has three speeds: high speed, middle speed and low speed.
Setting temperature is 18°C-30°C
24 Hours timer
Water-level protective function
1. Control Instructions
Control Panel:
a. When plug in, follow the start music, unit is in standby status. Digital screen will indicate
temperature (Range: 5°C-35°C/41°F-95°F), if ambient temperature above 35°C, screen will show
“H”. If it is below 5°C, it will indicate “L” and the unit will enter standby status.
When pressing this button, the model will enter cooling mode (Setting temperature 24°C/75°F),
high speed fan. Press again, the unit will shut off and play shut-off music.
Press this key to choose Cooling and Fan mode.
Under cooling mode:
Under fan model: same as cooling mode.
If switch between cooling and fan, fan speed won’t change.
Press it,
icon will flash, “88” areas indicate 24:00; you can set your time through
buttons. The HOUR number will change from 1,2,3…25; the Minute number will
change from 10, 20, 30…50. Auto shut-off timer is only available when the unit on; auto-run
timer is only available when the unit is off.
After timer setting accomplishes effectively
due. If set again, history record will be cleared.
Can set temperature.
Under cooling mode, the setting temperature ranges from 18°C-30°C/64°F-86°F.
If pressing Up
and Down
button simultaneously, the unit will shift between °C to °F.
Under cooling mode, pressing the key can make the unit change into sleeping mode, LCD will
icon will keep on flashing until setting time is
, press again to cancel.
Press this key to start auto swing function, press again to cancel.
Press this key to choose Max cool function; you can get cooling effect quickly only under cooling
2. Remote Control
Press this key to turn on/off the button.
Press this key to choose cooling and fan.
Press this key to turn up the temperature or adjust time.
Press this key to turn down temperature or adjust time.
Press this key to set low/ middle/ high fan speed.
Press this key to control the swing function.
Press this key to choose Centigrade or Fahrenheit.
: Press this key to enable this function.
Press this key to set time. Within 5 hours, time interval is half hour; from 5
hours to 24 hours, time interval is 1 hour. Once set number will flash 5 times as confirmation.
Under cooling mode, press this key to achieve maximum output.
Once set, press this key to use of something like a pin to lock the button, as the
screen will show image:
from playing with the unit).
, press this key again to unlock (This function can prevent the child
Press this key by using something like a pin to reset the remote control, default
setting is cooling mode and high speed fan, auto swing.
3. Multi protective function
a. Anti-freezing protecting control:
When the ambient temperature is very low under Cooling mode, the compressor and water
motor will stop working if the copper coil temperature Tp < 2°C, the for over 20 seconds. After
the compressor continues working for 10 minutes, the LCD Display E4; when copper coil
temperature will increase >8°C, the protection will be stopped automatically, and recover to
previous mode on the condition that compressor three-minutes delay protection satisfied.
b. Water-full protection:
When the water level in the bottom water plate is surpassing warning level, the unit will alert
automatically and “P2” will flash on LCD. Please discharge water in the machine according to
Chapter “Water Drainage”.
c. Compressor delay-function:
Except for the first power-on, the compressor can start at once. In other cases, the compressor
runs under 3 minutes delay protection.
d. No refrigerant protection:
Under cooling and fan mode; after compressor works for over 10 minutes. If the temperature
difference of coil temperature and room temperature is less than 3°C for more than 30 minutes,
the machine will enter no-refrigerant protection. That is to say, there is no refrigerant in the
unit, compressor and water spring motor stop working, up fan runs with low speed, down fan
stops running, E3 appears on LCD.
e. Press any key on the control panel; background light will turn bright from dark for 10 seconds.
1. Manual Drainage:
a. When water tank is full and unit stops working; please shut off the unit and unplug it. Please
don’t move the model abruptly, or the water will spill out from water received plate.
b. Use a water container to take water out of the water plug.
c. Unscrew the water cap and unplug the water plug, water will come out to the water
NOTE: If the power cord set of this appliance becomes damaged, discontinue use. Repairs should be
undertaken only by a qualified technician.
CAUTION: To avoid of electric shock, you must always switch off and unplug the unit before cleaning.
Your appliance must be switched OFF via the main power supply and unplugged before
proceeding with any cleaning.
Clean the housing with a damp cloth, a vacuum cleaner or a dusting brush.
It is recommended that you clean the water tank every 2 weeks and the flume every week.
Never use flammable or abrasive cleaning agents such as benzene or spirits to clean the
Never immerse the appliance in water.
Store the unit in a clean dry place when not in use.
1. Air Filter Cleaning:
Clean the air filters every 2 weeks. If the air filter is blocked with dust, the efficiency will reduce.
a. Pull out up and down filter as below image (Figure 8).
b. Wash the air filters by immersing it gently into warm (about 40°C) water with a neutral
detergent, rinse it and dry it thoroughly in a shaded place.
c. Install air filters carefully after cleaning the filters.
Figure 5
Figure 8
NOTE: Active carbon filter cloth (choose the accessories depending on your needs) can be put out after
putting the filter frame and should be changed every 2-e weeks based on the environment.
a. Pull out the plug in drainage hole and empty the water-received plate, or drain out the water by
learning the unit, then shift the unit mode to fan mode. Press the button for 5 seconds till it goes
to low fan speed. Keep this mode for half day till the conduit is dried. Doing like this can keep the
inner unit dried and not go mouldy.
b. Turn off the unit and pull out the plug.
c. Coil the wire and bind it together, then put it into the accessories room.
d. Separate the air-exhausted pipe and safely keep it.
e. Put the unit into a plastic bag, they keep it in a dry place.
f. Take out the batteries of the remote control and safely keep them.
* All accessories can be put in the accessories room on the back of the unit.
Don’t repair or disassemble the unit by yourself, unstable repair may make the quality-protected card in
vain, and even cause damage to the user or his/her possession.
The unit doesn’t work.
No power supply.
Water-full indicator illuminate.
Power-on and turn on the unit.
Drain out the inner stored
Cancel Timer function.
Suggesting ambient
temperature between 7°C40°C.
Draw the curtains
Timer function is active.
Room temperature too low or
too high.
In direct sunlight.
The unit does not seem to
Windows or doors open, many
people or a heat source in the
Filter is very dirty.
Close windows and turn on
another air conditioner.
Clean or change the air filter.
Air inlet or air outlet is blocked.
The unit noise is high.
Compressor doesn’t work.
Remote control doesn’t work.
E1 on LCD
E2 on LCD
E3 on LCD
E4 on LCD
P2 on LCD
Clear out the air inlet or air
Room temperature is lower
Change the setting
than setting temperature.
The unit is not put on a flat
Put the unit on a flat, even and
hard surface (reduce noise).
Heat-exceeded protection is
Re-start the unit 4 minutes
later till the temperature cools
The distance is too far.
Let the remote control near the
unit and make sure it aims at
Control panel hasn’t received
the air outlet grille.
the signal from remote control.
The batteries ran out.
Change the batteries.
Coil temperature is abnormal.
Check coil temperature sensor
or relevant circuit.
Room temperature is
Check room temperature
sensor or relevant circuit.
No refrigerant or there is very
Check leakage, wielding,
few refrigerant.
vacuum pump, charge
refrigerant according to name
Anti-freezing protection.
Waiting for defrosting, function
will recover automatically.
Water is full inside the
Drain out water from the drain
port at the bottom rear of the
If none of the solutions resolves your problems, please contact the customer service.
Fuse Parameter
Voltage: 250V
Current: 3.15A
Disposal: Do not dispose this product as waste. Please contact the council
for information regarding disposal of this unit.
15,000 BTU
Portable Air
Australian Customer Service
GAF Control (Sales) Pty Ltd
P.O Box 19
Altona North Victoria 3025
Phone: 1300 659 489
Hours: 9am-5pm (EST) Mon-Fri
*This product may vary slightly to the product illustrated due to ongoing product development.
Air Flow
Download PDF