assero H20P Portable Moisture in Oil Meter

assero H20P - The very best for moisture in oil.
assero H20P Portable Moisture in Oil Meter
For the very best results from your moisture in oil analysis, the
assero H20P has been developed in response to many comments
from our customers in laboratories and in the field, to develop a
portable, robust, easy to use and highly accurate moisture meter for
the measurement of down to 1ppm H20 in insulating oils.
The microprocessor controlled assero H20P has a built-in battery and optional carry case ,
provide the versatility required by the laboratory and also the ease of use and portability
required by the field personnel and carries a 5 year warranty.
Easy to Use
Simple to programme so that only a single button needs to be pressed for the analysis ,
everything else is automatic.
The unique hermetically sealed glassware design is designed to eliminate any outside
atmospheric moisture getting into the cell, allowing the highest sensitivity and performance
on the market. The “quick-connect” system hermetically seals the glassware without the
use of expensive grease or Teflon sleeves allowing trouble free assembly, maintenance and
Results & Records
The built-in high speed printer provides a hard copy of results and allows duplicate print
outs if required. Results can also be downloaded via the Results Manager software package
onto a pc spreadsheet format.
Spares & Accessories
The assero H2OP is supplied ready for operation. A comprehensive glassware pack including
electrodes, Glass titration vessel, leads, syringe, printer paper, etc, is supplied as standard. A
calibration certificate and 5 year warranty is also provided.
Specially formulated to provide optimum performance with all makes and models of
coulometric Karl Fischer titrators, our unique reagents provide improved sample miscibility
and solubility. assero H2OP reage nts are packaged in single-shot screw top bottles
containing 100ml anode reagent and 5ml easy-snap ampoules of cathode reagent. A
standard carton contains 8 anode charges and 8 cathode charges. The reagent pack
comprises 8 x 100ml anode reagent and 8 x 5ml cathode reagent.
assero H2OP Coulometric KF Moisture in Oil Meter • Simple operation • 10 user programmable methods • 1ppm / 100% • Results in ppm,
mg/kg, % & µg water ¬• Multi language display & print out ¬• Small footprint ¬• Integral high speed printer ¬• Fully portable ¬• Low drift
cell design ¬• Automatically compensated errors (patented technique) • Optional carry case ¬• Conforms to ASTM D1533, D 4928, D6304,
IP386, IP438, API MPMS Chapter 10.9, IEC60814, ISO 10101-3, 10337 & 12937.
27 Technical Specification - assero H20P
Titration method
AC polarisation
End point
Visual display/print out/acoustic beep
40 character alphanumeric backlit LCD
10-100μg ±3μg, 100μg-1mg ±5μg, above 1mg ±0.5%
Weight/weight, user programmable
Automatic Compensated Errors control system
End point
Weight/dilution ratio, user programmable
Volume/density, user programmable
Volume/volume, user programmable
μg, mg/kg, ppm, %
μg, mg/kg, ppm, %
Measuring range
1μg – 100mg water
Print format
Measuring range
1μg – 10mg water
max, mean, min values upto 99 runs
Moisture range
1 ppm – 100% water
Max. sensitivity
0.1 μg
USB output
USB Flash Drive
Max. titration
2.0 mg per minute
Sample ID
User programmable
Max. current
400 ma
Method storage
10 user programmable methods
42 character high speed thermal printer
Automatically controlled
Stirrer speed
Microprocessor controlled
Start delay time
0 – 30 minutes, user selectable
Dimensions &
250 x 245 x 120 mm, 3kg
End delay time
0 – 30 minutes, user selectable
Analysis time & date print out
Battery low
Display & print out indication
Power supply
Coulometric Karl Fischer titration
90-264V AC, 47-63 Hz. 12V DC car adapter/internal battery
Download PDF