PANTONE2728
®
User’s Guide
Safety and Legal
Basic User’s Guide
Advanced User’s Guide
Safety and Legal
1
MFC-J6510DW/J6710DW/J6910DW
Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan
Please read this booklet before attempting to operate the machine, or before attempting any
maintenance. Failure to follow these instructions may result in an increased risk of fire, electrical
shock, burns or suffocation.
Symbols and
conventions used in
the documentation
The following symbols and conventions are
used throughout the documentation.
Bold
Bold typeface identifies specific
buttons on the machine’s
control panel, or on the
computer screen.
Italics
Italicized typeface emphasizes
an important point or refers you
to a related topic.
Courier
New
Text in the Courier New font
identifies messages on the
LCD of the machine.
WARNING
1
WARNING indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injuries.
CAUTION
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injuries.
IMPORTANT
IMPORTANT indicates a potentially
hazardous situation which, if not avoided,
may result in damage to property or loss of
product functionality.
Notes tell you how you should
respond to a situation that may arise
or give tips about how the operation
works with other features.
Electrical Hazard icons alert you to
possible electrical shock.
Improper Setup icons alert you to
devices and operations that are not
compatible with the machine.
Fire Hazard icons alert you to the
possibility of fire.
Follow all warnings and instructions marked
on the machine.
Note
The illustrations in this guide show the
MFC-J6710DW.
Version 0
UK/IRE/GEN
1
Compilation and Publication Notice
Under the supervision of Brother Industries, Ltd. this manual has been compiled and published,
covering the latest product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without
notice.
Brother reserves the right to make changes without notice in the specifications and materials
contained herein and shall not be responsible for any damages (including consequential) caused
by reliance on the materials presented, including but not limited to typographical and other errors
relating to the publication.
2
1
Choose a safe location for your machine
1
Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put
the machine near a telephone socket and a standard grounded electrical socket. Choose a dry,
well ventilated location where the temperature remains between 10 C and 35 C.
WARNING
DO NOT expose the machine to direct sunlight, excessive heat, open flames, salty or corrosive
gasses, moisture or dust. DO NOT place your machine on a carpet or rug, as this will expose it
to dust. Doing so may create a risk of an electrical short or fire. It may also damage the machine
and/or render it inoperable.
DO NOT place the machine near heaters, air conditioners, water, chemicals or devices that
contain magnets or generate magnetic fields. Doing so may create the risk of a short circuit or
fire should water come into contact with the machine (including condensation caused by
heating/air conditioning/ventilation equipment).
Slots and openings in the casing and the back or bottom are provided for ventilation. To ensure
reliable operation of the machine and to protect it from overheating, these openings must not be
blocked or covered.
DO NOT put the machine in a location where any slot or opening in the machine is obstructed
or blocked. These slots and openings are provided for ventilation. Blocking the machine’s
ventilation could create a risk of overheating and/or fire.
IMPORTANT
• Always place the machine on a solid surface, never on a bed, sofa, rug, or other similar soft
surface.
• Do not place this machine near or over a radiator or heater.
• Do not place this machine in a “built-in” installation.
3
IMPORTANT
• DO NOT put objects on top of the machine.
• DO NOT place anything in front of the machine that will block received faxes. DO NOT place
anything in the path of received faxes.
• DO NOT place your machine next to sources of interference, such as speakers or the base
units of non Brother cordless telephones. Doing so may interfere with the operation of the
machine's electronic components.
• DO NOT place the machine on any tilted/slanted surface. DO NOT tip the machine after the
ink cartridges are installed. Doing so may cause ink spillage and internal damage to the
machine.
General precautions
WARNING
Plastic bags are used in the packing of your machine. To avoid the danger of suffocation, keep
these bags away from babies and children.
Never push objects of any kind into this machine through cabinet slots, since they may touch
dangerous voltage points or short out parts resulting in the risk of fire or electric shock. If metal
objects, water or other liquids get inside the machine, immediately unplug the machine from the
electrical socket. Call your Brother dealer or Brother Customer Service.
DO NOT use flammable substances, any type of spray, or an organic solvent/liquid that contains
alcohol or ammonia to clean the inside or outside of the machine. Doing this may cause a fire
or electrical shock.
4
1
CAUTION
Wait until pages have exited the machine before picking them up. Doing this may cause injury
to your fingers by trapping them in a roller.
Some areas of the machine can cause injury if covers (shaded) are closed with force. Take care
when placing your hand in the areas shown in the illustrations.
DO NOT touch the area shaded in the illustration. Doing this may cause injury to your fingers by
cutting them on the edge of the machine.
5
DO NOT carry the machine by holding the scanner cover or the Jam Clear Cover. Doing this
may cause the machine to slip out of your hands. Only carry the machine by placing your hands
under the entire machine.
(MFC-J6510DW)
1
(MFC-J6710DW and MFC-J6910DW)
To prevent injuries when moving or lifting this machine, make sure to use at least two people.
Be careful not to pinch your fingers when you set the machine back down.
IMPORTANT
• Disruption of power can wipe out information in the machine's memory.
• (MFC-J6910DW)
DO NOT touch the Touchscreen immediately after plugging in the power cord or turning on the
machine. Doing this may cause an error.
6
Connecting the machine safely
1
WARNING
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
Always make sure the plug is fully inserted.
This machine should be connected to an adjacent grounded AC power source within the range
indicated on the rating label. DO NOT connect it to a DC power source or inverter. Doing this
might cause an electrical shock. If you are not sure what kind of power source you have, contact
a qualified electrician.
This machine is equipped with a 3-wire grounded plug. This plug will only fit into a grounded
power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call your
electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounded plug.
Doing this might cause an electrical shock.
DO NOT use the machine if the power cord is frayed or damaged, doing so may cause an
electrical shock or a fire.
7
DO NOT pull on the middle of the AC power cord. DO NOT allow anything to rest on the power
cord. DO NOT place this machine where people can walk on the cord. Doing this might cause
an electrical shock.
Never touch telephone wires or terminals that are not insulated unless the telephone line has
been unplugged at the wall socket. Never install telephone wiring during a lightning storm. Never
install a telephone wall socket in a wet location. Doing this might cause an electrical shock.
Servicing the machine
DO NOT attempt to service this machine yourself because opening or removing covers may
expose you to dangerous voltage points and other risks and may void your warranty. Call your
Brother dealer or Brother Customer Service.
WARNING
If the machine has been dropped or the casing has been damaged, unplug this machine from
the power socket and call your Brother dealer or Brother Customer Service. Doing this might
cause an electrical shock.
CAUTION
If the machine becomes unusually hot, releases smoke, generates any strong smells, or if you
accidentally spill any liquid on it, immediately unplug the machine from the electrical socket. Call
your Brother dealer or Brother Customer Service.
IMPORTANT
If the machine does not operate normally when the operating instructions are followed, adjust
only those controls that are covered by the operating instructions. Incorrect adjustment of other
controls may result in damage and will often require extensive work by a qualified technician
to restore the machine to normal operation.
8
1
Product Warranty & Liability
1
Brother shall not be liable for any loss or damage that may arise from the use of the information
contained herein (including, without limitation, any direct, special or consequential damages).
Nothing contained herein shall affect any existing product warranty, or be construed as granting
any additional product warranty.
WARNING
DO NOT use this machine near water, for example, near a bath tub, wash bowl, kitchen sink or
washing machine, in a wet basement or near a swimming pool.
Avoid using this machine during an electrical storm. There may be a remote risk of electric shock
from lightning.
DO NOT use this machine to report a gas leak in the vicinity of the leak.
Use only the power cord supplied with this machine.
This product must be installed near an electrical socket that is easily accessible. In case of an
emergency, you must unplug the power cord from the electrical socket to shut off the power
completely.
Approval Information
1
THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE
FITTED WITH THE APPROPRIATE CONNECTOR.
Brother advises that this product may not function correctly in a country other than where it was
originally purchased, and does not offer any warranty in the event that this product is used on
public telecommunication lines in another country.
9
Declaration of Conformity (Europe only)
1
We, Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan
declare that this product is in compliance with the essential requirements of Directives 1999/5/EC
and 2009/125/EC.
The Declaration of Conformity (DoC) is on our Website.
Please go to http://solutions.brother.com/
-> choose region (eg. Europe)
-> choose country
-> choose your model
-> choose "Manuals"
-> choose Declaration of Conformity (Select Language when required.)
Wiring information (U.K. only)
1
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same
rating as the original fuse. Always replace the fuse cover. Never use a plug that does not have a
cover. If in any doubt, call a qualified electrician.
Warning - This machine must be earthed.
The wires in the mains lead are coloured in line with the following code:
 Green and Yellow: Earth
 Blue: Neutral
 Brown: Live
LAN connection
1
IMPORTANT
DO NOT connect this machine to a LAN connection that is subject to over-voltages.
Radio interference
This product complies with EN55022 (CISPR Publication 22)/Class B. When connecting the
machine to a computer, ensure that you use a USB cable which does not exceed 2 m in length.
10
1
Recycling information in accordance with the WEEE
(2002/96/EC) and Battery (2006/66/EC) Directives
Product mark
1
Battery mark
European Union only
The product/battery is marked with one of the above recycling symbols. It indicates that at the end
of the life of the product/battery, you should dispose of it separately at an appropriate collection
point and not place it in the normal domestic waste stream.
For products with user replaceable batteries please refer to the users guide for replacement
instructions.
International ENERGY STAR® Qualification Statement
1
The purpose of the International ENERGY STAR® Program is to promote the development and
popularization of energy-efficient office equipment.
As an ENERGY STAR® Partner, Brother Industries, Ltd. has determined that this product meets
the ENERGY STAR® specifications for energy efficiency.
11
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United
States and/or other countries.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
Apple, Macintosh and Mac OS are trademarks of Apple Inc., registered in the United States and
other countries.
Adobe, Flash, Illustrator and Photoshop are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
Nuance, the Nuance logo, PaperPort and ScanSoft are trademarks or registered trademarks of
Nuance Communications, Inc. or its affiliates in the United States and/or other countries.
Memory Stick, Memory Stick PRO, Memory Stick PRO Duo, Memory Stick Duo, MagicGate,
MagicGate Memory Stick, Memory Stick Micro and M2 are trademarks of Sony Corporation.
AOSS is a trademark of Buffalo Inc.
WPA, WPA2, Wi-Fi Protected Access and Wi-Fi Protected Setup are either trademarks or
registered trademarks of Wi-Fi Alliance in the United States and/or other countries.
Wi-Fi and Wi-Fi Alliance are registered trademark of the Wi-Fi Alliance.
Intel and Pentium are trademarks of Intel Corporation in the U.S. and other countries.
AMD is a trademark of Advanced Micro Devices, Inc.
FaceFilter Studio is a trademark of Reallusion, Inc.
BRAdmin Professional is a trademark of Brother Industries, Ltd.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
CorelDraw, Corel Paint Shop Pro and Corel WordPerfect are trademarks or registered trademarks
of Corel Corporation and/or its subsidiaries in Canada, the United States and/or other countries.
Each company whose software title is mentioned in this manual has a Software License
Agreement specific to its proprietary programs.
Any trade names and product names of companies appearing on Brother products, related
documents and any other materials are all trademarks or registered trademarks of those
respective companies.
12
1
Open Source Licensing Remarks
1
This product includes open-source software.
Please see Open Source Licensing Remarks and Copyright information on the supplied CD-ROM.
(For Windows®) “X:\License.txt” (where X is your drive letter).
(For Macintosh) Double-click the CD-ROM icon on your desktop. Then double-click the Utilities
icon. License.rtf will appear.
Unlawful use of copying equipment
1
It is an offence to make reproductions of certain items or documents with the intent to commit
fraud. The following is a non-exhaustive list of documents which it may be unlawful to produce
copies of. We suggest you check with your legal adviser and/or the relevant legal authorities if in
doubt about a particular item or document:
 Currency
 Bonds or other certificates of indebtedness
 Certificates of Deposit
 Armed forces service or draft papers
 Passports
 Postage stamps (cancelled or uncancelled)
 Immigration papers
 Welfare documents
 Cheques or drafts drawn by governmental agencies
 Identifying badges or insignias
In addition, driving licenses and/or Certificates of Title to motor vehicles may not be copied under
certain national laws.
Copyrighted works cannot be copied lawfully, subject to the “fair dealing” exception relating to
sections of a copyrighted work. Multiple copies would indicate improper use. Works of art should
be considered the equivalent of copyrighted works.
13
BASIC USER’S GUIDE
MFC-J6510DW
MFC-J6710DW
Version 0
UK/IRE/GEN
If you need to call Customer Service
Please complete the following information for future
reference:
Model Number: MFC-J6510DW and MFC-J6710DW
(Circle your model number)
Serial Number: 1
Date of Purchase:
Place of Purchase:
1
The serial number is on the back of the unit. Retain
this User's Guide with your sales receipt as a
permanent record of your purchase, in the event of
theft, fire or warranty service.
Register your product on-line at
http://www.brother.com/registration/
© 2010 Brother Industries, Ltd.
User's Guides and where do I find it?
Which manual?
What's in it?
Where is it?
Safety and Legal
Read this Guide first. Please read the Safety
Instructions before you set up your machine.
See this Guide for trademarks and legal
limitations.
Printed / In the box
Quick Setup Guide
Follow the instructions for setting up your
machine and installing the drivers and software
for the operating system and connection type
you are using.
Printed / In the box
Basic User's Guide
Learn the basic Fax, Copy, Scan and
PhotoCapture Center™ operations and how to
replace consumables. See troubleshooting tips.
Printed / In the box
Advanced User's Guide
Learn more advanced operations: Fax, Copy,
security features, printing reports and
performing routine maintenance.
PDF file /
Documentation
CD-ROM
Software User's Guide
Follow these instructions for Printing, Scanning,
Network Scanning, PhotoCapture Center™,
Remote Setup, PC-Fax, and using the Brother
ControlCenter utility.
PDF file /
Documentation
CD-ROM
Network Glossary
This Guide provides basic information about
advanced network features of Brother
machines along with explanations about
general networking and common terms.
PDF file /
Documentation
CD-ROM
Network User's Guide
This Guide provides useful information about
wired and wireless network settings and
security settings using the Brother machine.
You can also find supported protocol
information for your machine and detailed
troubleshooting tips.
PDF file /
Documentation
CD-ROM
i
Table of Contents
(BASIC USER’S GUIDE)
1
General information
1
Using the documentation .......................................................................................1
Symbols and conventions used in the documentation ....................................1
Accessing the Advanced User’s Guide, Software User’s Guide,
Network User’s Guide and Network Glossary ....................................................1
Viewing Documentation...................................................................................1
Accessing Brother Support (Windows®) ................................................................3
Accessing Brother Support (Macintosh) ................................................................3
Control panel overview ..........................................................................................4
LCD screen indications....................................................................................7
Basic Operations .............................................................................................8
Volume Settings.....................................................................................................8
Ring Volume ....................................................................................................8
Beeper Volume................................................................................................9
Speaker Volume ..............................................................................................9
LCD display ...........................................................................................................9
Setting the backlight brightness.......................................................................9
2
Loading paper
10
Loading paper and other print media...................................................................10
Loading paper in paper tray #1......................................................................10
Loading paper in paper tray #2 (MFC-J6710DW only)..................................13
Loading paper in the manual feed slot ..........................................................17
Loading envelopes and postcards .................................................................19
Printable area ................................................................................................21
Paper settings......................................................................................................22
Paper Size and Type (MFC-J6510DW).........................................................22
Paper Size and Type (MFC-J6710DW).........................................................23
Tray use in Copy mode (MFC-J6710DW only)..............................................23
Tray use in Fax mode (MFC-J6710DW only) ................................................24
Secure Paper Feed mode for A3 size Short Grain Paper .............................24
Acceptable paper and other print media..............................................................25
Recommended print media ...........................................................................25
Handling and using print media .....................................................................26
Choosing the right print media.......................................................................27
3
Loading documents
29
How to load documents .......................................................................................29
Using the ADF ...............................................................................................29
Using the scanner glass ................................................................................30
Scannable area .............................................................................................31
ii
4
Sending a fax
32
How to send a fax ................................................................................................ 32
Stop faxing..................................................................................................... 33
Setting scanner glass size for faxing ............................................................. 33
Colour fax transmission .................................................................................33
Cancelling a fax in progress ..........................................................................33
How to preview an outgoing fax .................................................................... 34
Transmission Verification Report...................................................................34
5
Receiving a fax
36
Receive Modes ....................................................................................................36
Choose the Receive Mode .................................................................................. 36
Using Receive Modes..........................................................................................37
Fax Only ........................................................................................................37
Fax/Tel...........................................................................................................37
Manual...........................................................................................................37
External TAD .................................................................................................37
Receive Mode settings ........................................................................................38
Ring Delay ..................................................................................................... 38
F/T Ring Time (Fax/Tel mode only)............................................................... 38
Fax Detect ..................................................................................................... 39
Fax Preview (Monochrome only) ......................................................................... 39
How to preview a received fax....................................................................... 39
6
Telephone and external devices
41
Voice operations .................................................................................................. 41
Tone or Pulse ................................................................................................ 41
Fax/Tel mode.................................................................................................41
Caller ID (U.K. and Ireland only).................................................................... 41
Telephone services.............................................................................................. 42
Setting the Telephone Line Type...................................................................42
Connecting an external TAD (telephone answering device)................................44
Connections settings ..................................................................................... 44
Recording an outgoing message (OGM) on an external TAD .......................44
Multi-line connections (PBX) ......................................................................... 45
External and extension telephones...................................................................... 45
Connecting an external or extension telephone ............................................45
Operation from external and extension telephones .......................................46
Using extension telephones (U.K. only) ........................................................ 46
Using a cordless external telephone ............................................................. 47
Using remote codes....................................................................................... 47
iii
7
Dialling and storing numbers
49
How to dial ...........................................................................................................49
Manual dialling...............................................................................................49
One Touch Dialling ........................................................................................49
Speed Dialling ...............................................................................................49
Search ...........................................................................................................50
Fax Redial .....................................................................................................50
Additional Dialling Operations..............................................................................51
Outgoing Call history .....................................................................................51
Caller ID history .............................................................................................51
Storing numbers ..................................................................................................52
Storing a pause .............................................................................................52
Storing One Touch Dial numbers ..................................................................52
Storing Speed Dial numbers..........................................................................53
Changing One Touch or Speed Dial names or numbers...............................54
8
Making copies
55
How to copy .........................................................................................................55
Stop copying..................................................................................................55
Copy settings.................................................................................................55
Paper Options................................................................................................56
9
Printing photos from a memory card or
USB Flash memory drive
57
PhotoCapture Center™ operations .....................................................................57
Using a memory card or USB Flash memory drive .......................................57
Getting started .....................................................................................................58
Print Images.........................................................................................................60
View Photos...................................................................................................60
PhotoCapture Center™ print settings..................................................................60
How to scan to a memory card or USB Flash memory drive...............................61
10
How to print from a computer
63
Printing a document.............................................................................................63
11
How to scan to a computer
64
Scanning a document ..........................................................................................64
Scanning using the scan key ...............................................................................64
Scanning using a scanner driver .........................................................................65
iv
A
Routine maintenance
66
Replacing the ink cartridges ................................................................................ 66
Cleaning and checking the machine.................................................................... 68
Cleaning the scanner glass ........................................................................... 68
Cleaning the print head .................................................................................69
Checking the print quality .............................................................................. 70
Checking the print alignment ......................................................................... 71
B
Troubleshooting
72
Error and Maintenance messages....................................................................... 72
Error animations display ................................................................................ 79
Transferring your faxes or Fax Journal report ............................................... 79
Document jam .............................................................................................. 80
Printer jam or paper jam ................................................................................ 81
Troubleshooting .................................................................................................. 88
If you are having difficulty with your machine ................................................ 88
Dial Tone detection........................................................................................95
Telephone line interference / VoIP ................................................................ 95
Machine Information ............................................................................................ 96
Checking the serial number........................................................................... 96
Reset functions.............................................................................................. 96
How to reset the machine.............................................................................. 96
C
Menu and features
97
On-screen programming......................................................................................97
Menu table ...........................................................................................................98
Entering Text ..................................................................................................... 124
Inserting spaces .......................................................................................... 124
Making corrections ......................................................................................124
Repeating letters ......................................................................................... 124
Special characters and symbols.................................................................. 124
D
Specifications
125
General .............................................................................................................. 125
Print media.........................................................................................................127
Fax..................................................................................................................... 129
Copy ..................................................................................................................130
PhotoCapture Center™ ..................................................................................... 131
PictBridge .......................................................................................................... 132
Scanner .............................................................................................................133
Printer ................................................................................................................134
Interfaces ...........................................................................................................135
Computer requirements ..................................................................................... 136
Consumable items .............................................................................................137
Network (LAN) ................................................................................................... 138
E
Index
139
v
Table of Contents
(ADVANCED USER’S GUIDE)
The Advanced User's Guide explains the following features and operations.
You can view the Advanced User's Guide on the Documentation CD-ROM.
1
General setup
8
Memory storage
Automatic Daylight Saving Time
Sleep Mode
LCD display
Mode Timer
2
3
PhotoCapture Center™ operations
Print Images
PhotoCapture Center™ print settings
Scan to a memory card or USB Flash
memory drive
Security features
Secure Function Lock 2.0
9
Sending a fax
Receiving a fax
Memory Receive (Monochrome only)
Remote Retrieval
Additional receiving operations
Polling overview
5
Printing reports
Fax reports
Reports
7
Making copies
Copy settings
vi
A
Routine maintenance
Cleaning and checking the machine
Packing and shipping the machine
B
Glossary
C
Index
Dialling and storing numbers
Voice operations
Additional dialling operations
Additional ways to store numbers
6
Printing photos from a
camera
Printing photos directly from a
PictBridge camera
Printing photos directly from a digital
camera (without PictBridge)
Additional sending options
Additional sending operations
Polling overview
4
Printing photos from a
memory card or USB Flash
memory drive
1
General information
Using the
documentation
The following symbols and conventions are
used throughout the documentation.
Bold
Bold typeface identifies specific
buttons on the machine’s
control panel, or on the
computer screen.
Italics
Italicized typeface emphasizes
an important point or refers you
to a related topic.
Courier
New
Text in the Courier New font
identifies messages on the
LCD of the machine.
WARNING
WARNING indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injuries.
1
Electrical Hazard icons alert you to
possible electrical shock.
1
Accessing the
Advanced User’s Guide,
Software User’s Guide,
Network User’s Guide
and Network Glossary
IMPORTANT
IMPORTANT indicates a potentially
hazardous situation which, if not avoided,
may result in damage to property or loss of
product functionality.
1
This Basic User’s Guide does not contain all
the information about the machine such as how
to use the advanced features of the Fax, Copy,
PhotoCapture Center™, Printer, Scanner,
PC-Fax and Network. When you are ready to
learn detailed information about these
operations, read the Advanced User’s Guide,
Software User’s Guide,
Network User’s Guide and
Network Glossary that are on the
Documentation CD-ROM.
Viewing Documentation
a
CAUTION
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injuries.
1
Notes tell you how you should
respond to a situation that may arise
or give tips about how the operation
works with other features.
Thank you for buying a Brother machine!
Reading the documentation will help you
make the most of your machine.
Symbols and conventions
used in the documentation
1
1
Turn on your computer. Insert the
Documentation CD-ROM into your
CD-ROM drive. For Windows® users, go
to step c.
Note
(Windows® users)
If the screen does not appear automatically,
go to My Computer (Computer),
double-click the CD-ROM icon, and then
double-click index.html.
b
(Macintosh users)
Double-click the Documentation CD-ROM
icon, and then double-click index.html.
1
Chapter 1
c
Click your country.
How to find Scanning instructions
1
There are several ways you can scan
documents. You can find the instructions as
follows:
Software User’s Guide
 Scanning
 ControlCenter
 Network Scanning
d
Point to your language, point to View Guide,
and then click the guide you want to read.
ScanSoft™ PaperPort™12SE with OCR
How-to-Guides
(Windows® users)
 The complete ScanSoft™
PaperPort™12SE with OCR
How-to-Guides can be viewed from the
Help selection in the ScanSoft™
PaperPort™12SE application.
(Windows® 2000 users need to download
and install PaperPort™11SE from
website.)
Presto! PageManager User’s Guide
(Macintosh users)
Note
Presto! PageManager must be
downloaded and installed before use. See
Accessing Brother Support (Macintosh)
on page 3 for further instructions.
Note
• (Windows® users only)
Your Web browser may display a yellow bar
at the top of the page that contains a security
warning about Active X controls. For the
page to display correctly you must click on
the bar, click Allow Blocked Content, then
click Yes in the Security Warning dialog box.
• (Windows® users only) 1
For faster access, you can copy all user
documentation in PDF format to a local
folder on your computer. Point to your
language, then click Copy to local disk.
1
2
Microsoft® Internet Explorer® 6.0 or greater.
 The complete Presto! PageManager
User’s Guide can be viewed from the Help
selection in the Presto! PageManager
application.
How to find Network setup
instructions
Your machine can be connected to a wireless
or wired network. You can find basic setup
instructions in the Quick Setup Guide. If your
wireless access point or router supports Wi-Fi
Protected Setup or AOSS™, you can also
follow the steps in the Quick Setup Guide. For
more information about network setup please
see the Network User's Guide on the
Documentation CD-ROM.
1
General information
Accessing Brother
Support (Windows®)
1
Accessing Brother
Support (Macintosh)
You can find all the contacts you will need,
such as Web support (Brother Solutions
Center) on the Installation CD-ROM.
You can find all the contacts you will need,
such as Web support (Brother Solutions
Center) on the Installation CD-ROM.
 Click Brother Support on Top Menu.
The following screen will appear:
 Double-click the Brother Support icon.
The following screen will appear:
 To access our website
(http://www.brother.com/), click
Brother Home Page.
 For the latest news and product support
information
(http://solutions.brother.com/), click
Brother Solutions Center.
 To visit our website for original Brother
Supplies
(http://www.brother.com/original/),
click Supplies Information.
 To access the Brother CreativeCenter
(http://www.brother.com/creativecenter/)
for FREE photo projects and printable
downloads,
click Brother CreativeCenter.
1
 To download and install Presto!
PageManager, click
Presto! PageManager.
 To register your machine from the Brother
Product Register Page
(http://www.brother.com/registration/),
click On-Line Registration.
 For the latest news and product support
information
(http://solutions.brother.com/), click
Brother Solutions Center.
 To visit our website for original Brother
Supplies
(http://www.brother.com/original/), click
Supplies Information.
 To return to the Top Menu, click Back or
if you have finished, click Exit.
3
1
Chapter 1
Control panel overview
1
Note
Most of the illustrations in this User’s Guide show the MFC-J6710DW.
MFC-J6510DW
1
9
7
8
Fax Preview:OFF
00
1
2
MFC-J6710DW
1
9
7
8
Fax Preview:OFF
00
1
4
2
General information
1
6
10:2
10:29
0:29
01.01.2011
1.01.2011
Fax Mem.
3
4
5
6
10:2
10:29
0:29
01.01.2011
1.01.2011
Fax Mem.
3
4
5
5
Chapter 1
1
2
Fax, Telephone and Copy keys:
 Duplex Copy
Press this key to copy on both sides of the
paper.
 N in 1 Copy
Press this key to make N in 1 or Poster
copies.
 Fax Preview
Lets you preview incoming and outgoing
faxes on the LCD.
 Tel/R
This key is used to have a telephone
conversation after picking up the external
handset during the F/T Ring (fast
double-ring).
Also, when connected to a PBX, you can
use this key to gain access to an outside
line or to transfer a call to another
extension.
 Redial/Pause
Redials the last 30 numbers called. It also
inserts a pause when programming quick
dial numbers.
 Paper Setting (MFC-J6510DW)
Press this key to set the paper size or paper
type.
 Tray Setting (MFC-J6710DW)
Press this key to choose the tray you want
to use for printing.
3
d c
While the machine is idle, you can press
these keys to adjust the ring volume.
 Phone Book key





Dial Pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
The # key lets you temporarily switch the
dialling mode during a telephone call from
Pulse to Tone.
5
Start keys:
FAX
Lets you access Fax mode.

SCAN

Lets you access Scan mode.

Mono Start
Lets you start sending faxes or making
copies in monochrome. Also lets you start a
scanning operation (in colour or mono
depending on the scan setting in the
ControlCenter software).
COPY
Lets you access Copy mode.

Lets you store, look up, and dial numbers
that are stored in the memory.
d or c
Press to scroll backward or forward to a
menu selection.
Also, press to choose options.
a or b
Press to scroll through the menus and
options.
Menu
Access the main menu.
Clear
Press to delete characters or to go back to
the previous menu level.
OK
Lets you confirm a selection.
4
Mode keys:

Menu keys:
 Volume keys
PHOTO CAPTURE
Lets you access PhotoCapture Center™
mode.

Colour Start
Lets you start sending faxes or making
copies in full colour. Also lets you start a
scanning operation (in colour or mono,
depending on the scan setting in the
ControlCenter software).
6
Stop/Exit
Stops an operation or exits the menu.
6
General information
7
8
9
LCD (Liquid Crystal Display)
Displays messages on the screen to help you
set up and use your machine.
Also, you can adjust the angle of the LCD by
lifting it.
LCD screen indications
1
The LCD shows the current machine status
when the machine is idle.
One Touch keys
These 8 keys give you instant access to 16
previously stored numbers.
Shift
To access One Touch numbers 9 to 16, hold
down Shift as you press the One Touch key.
Also, if no number is assigned to the key, you
can directly store the number by pressing the
empty key.
On/Off
You can turn the machine on and off.
Press On/Off to turn the machine on.
Press and hold down On/Off to turn the
machine off. The LCD will show
Shutting Down and will stay on for a few
seconds before going off.
If you have connected an external telephone or
TAD, it is always available.
If you turn the machine off, it will still
periodically clean the print head to maintain
print quality. To prolong print head life, provide
the best ink cartridge economy, and maintain
print quality, you should keep your machine
connected to the power at all times.
1
10:2
10:29
0:29
01.01.2011
1.01.2011
Fax Preview:OFF
00
2
1
Fax Mem.
3 4
5
6
1
Fax Preview
You can check the Fax Preview status.
2
Faxes in memory
Shows how many received faxes are in the
memory.
3
Wireless Status
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
0
Max
4
Current Receive Mode
Lets you see the current receive mode.
 Fax (Fax Only)
 F/T (Fax/Tel)
 TAD (External TAD)
 Mnl (Manual)
5
Memory Status
Lets you see the available memory in the
machine.
6
Ink indicator
Lets you see the available ink volume.
The warning icon
appears when there is
an error or maintenance message. For
details, see Error and Maintenance
messages on page 72.
7
Chapter 1
Basic Operations
1
The following steps show how to change a
setting in the machine. In this example the
Mode Timer setting is changed from
2 minutes to 30 seconds.
a
b
Press Menu.
Press a or b to choose
General Setup.
Select & Press
MENU
OK
Ink Management
General Setup
Fax
Network
OK
Press OK.
c
Press a or b to choose Mode Timer.
Select & Press
General Setup
Mode Timer
Tray Setting
Volume
Auto Daylight
d
OK
2Mins
On
Press d or c to choose 30Secs.
Select & Press
General Setup
Mode Timer
Tray Setting
Volume
Auto Daylight
OK
30Secs
Select & Press
General Setup
OK
30Secs
On
Note
Press Clear to go back to the previous
level.
e
8
Press Stop/Exit.
Ring Volume
1
1
You can choose a range of ring volume
levels, from High to Off.
While the machine is idle, press d or c
to adjust the volume level. The LCD shows
the current setting, and each key press will
change the volume to the next level. The
machine will keep the new setting until you
change it.
You can also change the volume through the
menu, by following the instructions below:
Setting the Ring Volume from the
menu
a
b
Press Menu.
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
e
Press a or b to choose Ring.
On
Press OK.
You can see the current setting on the
LCD:
Mode Timer
Tray Setting
Volume
Auto Daylight
Volume Settings
f
Press d or c to choose Low, Med, High
or Off.
Press OK.
Press Stop/Exit.
1
General information
Beeper Volume
1
When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax.
Setting the backlight
brightness
You can choose a range of beeper volume
levels, from High to Off.
a
b
d
e
Press a or b to choose Beeper.
f
a
b
Press a or b to choose
General Setup.
Press OK.
Press a or b to choose Volume.
Press OK.
Press d or c to choose Low, Med, High
or Off.
Press OK.
Press Stop/Exit.
Speaker Volume
1
1
1
If you are having difficulty reading the LCD,
try changing the brightness setting.
Press Menu.
c
LCD display
Press Menu.
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
e
Press a or b to choose Backlight.
f
Press d or c to choose Light, Med or
Dark.
Press OK.
Press Stop/Exit.
1
You can choose a range of speaker volume
levels, from High to Off.
a
b
Press Menu.
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Volume.
Press OK.
d
e
Press a or b to choose Speaker.
f
Press d or c to choose Low, Med, High
or Off.
Press OK.
Press Stop/Exit.
9
2
Loading paper
Loading paper and
other print media
Note
2
Note
(MFC-J6710DW only)
For Tray #2, see Loading paper in paper
tray #2 (MFC-J6710DW only) on page 13.
Loading paper in paper
tray #1
a
2
2
• When you are using A3, Legal or Ledger
size paper, press the universal guide
release button (1) as you slide out the
front of the paper tray. Make sure that
when using Legal or A3 or Ledger size
paper, the triangular mark on the output
paper tray cover is aligned with the line
indicating Legal (2) or A3 or Ledger (3)
size, as shown in the illustration.
2
3
Pull the paper tray completely out of the
machine.
1
Note
If the paper support flap (1) is open, close
it, and then close the paper support (2).
1
2
10
• If you are using A5 or smaller size paper,
make sure that the paper tray is not
extended.
• (MFC-J6710DW)
When you load a different paper size in a
tray, you will need to change the paper
size setting in the machine at the same
time. (See Paper Size and Type
(MFC-J6710DW) on page 23.)
Loading paper
b
Open the output paper tray cover (1).
d
Fan the stack of paper well to avoid
paper jams and misfeeds.
2
1
Note
Always make sure that the paper is not
curled.
c
With both hands, gently press and slide
the paper length guide (1) and then the
paper side guides (2) to fit the paper
size.
Make sure that the triangular marks (3)
on the paper length guide (1) and paper
side guides (2) line up with the mark for
the paper size you are using.
e
Gently put the paper into the paper tray
print side down and top edge in first.
Check that the paper is flat in the tray.
2
3
1
11
Chapter 2
Note
g
When you put Photo L size into the paper
tray, you need to release the hinges on
both sides of the output paper tray cover,
and push the cover over. And then slide
the paper length guide.
Close the output paper tray cover.
Check that the paper is flat in the tray
and below the maximum paper
mark (1).
Overfilling the paper tray may cause
paper jams.
1
h
f
Slowly push the paper tray completely
into the machine.
Gently adjust the paper side guides to
the paper with both hands.
Make sure the paper side guides touch
the sides of the paper.
WARNING
DO NOT push Tray #1 into the machine too
quickly. Doing this may cause injury to your
hand by trapping it between Tray #1 and
Tray #2. Please push Tray #1 slowly.
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
12
Loading paper
i
While holding the paper tray in place,
pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
Loading paper in paper
tray #2 (MFC-J6710DW only)
2
Note
2
You can only use plain paper sizes A4,
A3, Ledger, Letter or Legal in Tray #2.
2
a
Pull the paper tray completely out of the
machine.
1
Note
Before you shorten Tray #1, take the
paper out of the tray. Then shorten the
tray by pressing the universal guide
release button (1). Adjust the paper length
guide (2) to fit the paper size you are
going to use. Then put the paper into the
tray.
Note
• If you are using A3, Ledger or Legal size
paper, press the universal guide release
button (1) as you slide out the front of the
paper tray until it clicks.
1
• You can check if the length of the tray is
adjusted correctly by opening the paper
tray cover.
1
2
13
Chapter 2
b
d
Open the paper tray cover (1).
1
Fan the stack of paper well to avoid
paper jams and misfeeds.
Note
Always make sure that the paper is not
curled.
e
c
Using both hands, gently press and
slide the paper length guide (1) and then
the paper side guides (2) to fit the paper
size.
Make sure that the triangular marks (3)
on the paper length guide (1) and paper
side guides (2) line up with the marks for
the paper size you are using.
Gently put the paper into the paper tray
print side down and top edge in first.
Check that the paper is flat in the tray
and below the maximum paper
mark (1).
Overfilling the paper tray may cause
paper jams.
1
2
f
3
1
14
Using both hands, gently adjust the
paper side guides so they touch the
sides of the paper stack.
Loading paper
Note
j
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
g
Close the paper tray cover.
h
Slowly push the paper tray back into the
machine.
Pull tray #1 out of the machine.
Press the universal guide release
button (1) as you slide out the front of
the paper tray.
2
1
k
i
Do one of the following:
Open the output paper tray cover and
adjust the paper length guide (1) for the
paper.
 If you are using A3, Ledger or Legal
size paper, go to step j.
Note
When you are using large size paper in
Tray #2, you may need to extend Tray #1
out over Tray #2 to prevent printed pages
from falling off the output tray.
1
 If you are using A4 or Letter size
paper, go to step m.
15
Chapter 2
l
m
Close the output paper tray cover and
slowly push the paper tray into the
machine.
Note
If you are finished using A3, Ledger or
Legal size paper and want to use a
smaller paper size, take the paper out of
the tray. Then shorten the tray by pressing
the universal guide release button (1).
Adjust the paper length guide (2) to fit the
paper size you are going to use. Then put
the smaller paper into the tray.
Pull out the paper support (1) until it
clicks and unfold the paper support
flap (2).
1
2
1
2
16
Loading paper
Loading paper in the manual
feed slot
b
2
Slide the manual feed slot paper guides
to fit the paper width that you are going
to use.
You can load special print media one at a
time into this slot. Use the manual feed slot to
print or copy on envelopes, labels or thicker
paper.
2
Note
The machine automatically turns on the
Manual Feed mode when you put paper in
the manual feed slot.
a
Open the manual feed slot cover.
c
Put only one sheet of paper in the
manual feed slot with the side to be
printed face up.
IMPORTANT
• DO NOT put more than one sheet of paper
in the manual feed slot at any time. Doing
this may cause a paper jam. Wait until the
LCD shows
Put paper in Manual Feed Slot
Then Press Start before you feed the
next sheet of paper in the manual feed
slot.
• DO NOT put paper in the manual feed slot
when you are printing from Tray #1 or
Tray #2. Doing this may cause a paper
jam.
17
Chapter 2
d
Using both hands gently adjust the
manual feed slot paper guides to fit the
paper.
Note
When loading an envelope, or a sheet of
thick paper, push the envelope into the
manual feed slot until you feel it grab the
envelope.
f
If the data does not fit on one page, the
LCD will prompt you to load another
page. Place another sheet of paper in
the manual feed slot, and then press
Mono Start or Colour Start.
Note
• Make sure printing has finished before you
close the manual feed slot.
Note
• When paper is placed in the manual feed
slot, the machine always prints from the
manual feed slot.
• DO NOT press the paper guides too tightly
against the paper. Doing this may cause
the paper to fold.
• Paper inserted in the manual feed slot
while a test page, fax or report is being
printed will be ejected.
• Place the paper in the centre of the
manual feed slot between the paper
guides. If the paper is not centred, pull it
out and insert it again at the centre
position.
• During the machine's cleaning process,
paper you place in the manual feed slot
will be ejected. Wait until the machine
finishes its cleaning, and then put the
paper into the manual feed slot again.
e
18
Using both hands, put one sheet of
paper in the manual feed slot until the
front edge touches the paper feed roller
and the machine beeps. Let go of the
paper when you feel the machine feed
the paper in a short distance. The LCD
will show
Manual Feed Slot ready.
Loading paper
Loading envelopes and
postcards
About envelopes
Loading envelopes and postcards
2
a
2
Before loading, press the corners and
sides of envelopes or postcards to make
them as flat as possible.
2
2
 Use envelopes that weigh between 80 to
95 g/m2.
 Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first before printing many
envelopes.
IMPORTANT
If envelopes or postcards are “doublefeeding”, put one envelope or postcard in
the paper tray at a time.
IMPORTANT
DO NOT use any of the following types of
envelopes, as they will cause paper feed
problems:
• That are of a baggy construction.
• That have windows.
• That are embossed (have raised
writing on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Glue
Double flaps
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
19
Chapter 2
b
Put envelopes or postcards in the paper
tray with the address side down and the
leading edge (top of the envelopes) in
first. Using both hands, gently press and
slide the paper length guide (1) and
paper side guides (2) to fit the size of the
envelopes or postcards.
If you have problems when printing on
envelopes, try the following suggestions:
a
b
Open the envelope flap.
c
Adjust the size and margin in your
application.
Make sure the open flap is to the back
edge of the envelope when printing.
2
1
20
2
Loading paper
Printable area
2
The printable area depends on the settings in the application you are using. The figures below
show the unprintable areas on cut sheet paper and envelopes. The machine can print in the
shaded areas of cut sheet paper when the Borderless print feature is available and turned on.
(See Printing for Windows® or Printing and Faxing for Macintosh in the Software User’s Guide.)
Cut Sheet Paper
Envelopes
3
3
4
1
4
1
2
1
2
Top (1)
Bottom (2)
Left (3)
Right (4)
Cut Sheet
3 mm
3 mm
3 mm
3 mm
Cut Sheet
(Duplex print when
using A3 or Ledger
size)
22 mm
22 mm
3 mm
3 mm
Envelopes
22 mm 1
22 mm
3 mm
3 mm
The top margin of Y4 envelopes is 12 mm.
Note
The Borderless feature is not available for envelopes and duplex printing.
21
2
Chapter 2
Paper settings
Paper Size and Type
(MFC-J6510DW)
Paper Type
To get the best print quality, set the machine
for the type of paper you are using.
a
b
c
d
Press Paper Setting.
Press a or b to choose Paper Type.
Press d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61, Other Glossy or
Transparency.
Press OK.
Press a or b to choose Complete.
Press OK.
Note
The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
22
Paper Size
2
2
2
You can use seven sizes of paper for printing
copies: A4, A5, A3, 10  15 cm, Letter, Legal
and Ledger and five sizes for printing faxes:
A4, A3, Ledger, Letter and Legal. When you
change the size of paper you load in the
machine, you will need to change the paper
size setting at the same time so your machine
can fit an incoming fax on the page.
a
b
c
d
Press Paper Setting.
Press a or b to choose Paper Size.
Press d or c to choose A4, A5, A3,
10x15cm, Letter, Legal or Ledger.
Press OK.
Press a or b to choose Complete.
Press OK.
2
Loading paper
Paper Size and Type
(MFC-J6710DW)
To get the best print quality, set the machine
for the type of paper you are using.
You can use seven sizes of paper for printing
copies: A4, A5, A3, 10  15 cm, Letter, Legal
and Ledger and five sizes for printing faxes:
A4, A3, Ledger, Letter and Legal. When you
load a different size of paper in the machine,
you will need to change the paper size setting
at the same time so your machine can fit an
incoming fax on the page.
a
b
c
Press Tray Setting.
Press a or b to choose Tray#1 or
Tray#2.
Press OK.
Do one of the following:
 If you chose Tray#1, press a or b to
choose Paper Type and press
d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61, Other Glossy
or Transparency.
Press OK.
Press a or b to choose Paper Size
and press d or c to choose A4, A5,
A3, 10x15cm, Letter, Legal or
Ledger.
Press OK.
 If you chose Tray#2, press a or b to
choose Paper Size and press
d or c to choose A4, A3, Letter,
Legal or Ledger.
Press OK.
d
Press a or b to choose Complete.
Press OK.
e
Press a or b to choose Complete.
Press OK.
Note
2
• You can only use plain paper and paper
sizes A3, A4, Ledger, Letter or Legal
in Tray#2.
2
• The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
Tray use in Copy mode
(MFC-J6710DW only)
2
You can change the default tray the machine
will use for printing copies.
Auto Select will allow your machine to
feed paper from either Tray #1 or Tray #2,
using the paper type and size settings from
the COPY key menu.
To change the default setting follow the
instructions below:
a
b
Press Tray Setting.
Press a or b to choose
Tray Use:Copy.
c
Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
d
Press a or b to choose Complete.
Press OK.
Note
You can change the paper size and tray
selection temporarily for the next copy.
(See Paper Size on page 56 and Tray
Select (MFC-J6710DW only) on page 56.)
23
Chapter 2
Tray use in Fax mode
(MFC-J6710DW only)
2
You can change the default tray the machine
will use for printing received faxes.
Auto Select will allow your machine to
take paper from Tray #1 first, or from Tray #2
if:
 Tray #2 is set to a different paper size that
is more suitable for the received faxes.
Secure Paper Feed mode for
A3 size Short Grain Paper
If your prints have horizontal lines when using
A3 paper, your paper may be long grain
paper. Set A3 - Short Grain to Off to
avoid this problem.
a
b
 Both trays are using the same size paper
and Tray #1 is not set to use plain paper.
a
b
c
d
Press Menu.
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
A3 - Short Grain.
Press a or b to choose Tray Use:Fax.
d
Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
Press d or c to choose Off.
Press OK.
e
Press Stop/Exit.
Press Tray Setting.
Press a or b to choose Complete.
Press OK.
Note
• If you are not sure about the type of paper
you are using, consult the paper
packaging or manufacturer for paper
specifications.
• Printing will be slower when using the
A3 - Short Grain setting On.
24
2
Loading paper
Acceptable paper and
other print media
The print quality can be affected by the type
of paper you use in the machine.
To get the best print quality for the settings
you have chosen, always set the Paper Type
to match the type of paper you load.
You can use plain paper, inkjet paper (coated
paper), glossy paper, transparencies and
envelopes.
We recommend testing various paper types
before buying large quantities.
For best results, use Brother paper.
 When you print on inkjet paper (coated
paper), transparencies and glossy paper,
be sure to choose the correct print media
in the “Basic” tab of the printer driver or in
the Paper Type setting of the menu. (See
Paper Type on page 22.)
Recommended print media
2
2
To get the best print quality, we suggest using
Brother paper. (See the table below.)
If Brother paper is not available in your
country, we recommend testing various
papers before purchasing large quantities.
2
We recommend using “3M Transparency
Film” when you print on transparencies.
Brother paper
Paper Type
Item
A3 Plain
BP60PA3
A3 Glossy Photo
BP71GA3
A3 Inkjet (Matte)
BP60MA3
A4 Plain
BP60PA
A4 Glossy Photo
BP71GA4
A4 Inkjet (Matte)
BP60MA
10  15 cm Glossy
Photo
BP71GP
 When you print on Brother Photo paper,
load one extra sheet of the same photo
paper in the paper tray. An extra sheet has
been included in the paper package for
this purpose.
 When you use transparencies or photo
paper, remove each sheet at once to
prevent smudging or paper jams.
 Avoid touching the printed surface of the
paper immediately after printing; the
surface may not be completely dry and
may stain your fingers.
25
Chapter 2
Handling and using print
media
Labels
2
 Store paper in its original packaging, and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
 Avoid touching the shiny (coated) side of
photo paper. Load photo paper with the
shiny side facing down.
 Avoid touching either side of
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
IMPORTANT
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
1
2
Labels should be arranged so that they cover
the entire length and width of the sheet. Using
labels with spaces may result in labels
peeling off and causing serious jams or print
problems.
Types of labels to avoid
Do not use labels that are damaged, curled,
wrinkled or an unusual shape.
IMPORTANT
• DO NOT feed part used label sheets. The
exposed carrier sheet will damage your
machine.
• DO NOT reuse or insert labels that have
previously been used or are missing few
labels on the sheet.
Paper capacity of the output paper
tray cover
Up to 50 sheets of 80 g/m2 A4 paper.
1
1
2 mm or greater curl may cause jams
to occur.
• Extremely shiny or highly textured
paper
• Paper that cannot be arranged
uniformly when stacked
• Short grain paper
26
2
 Transparencies and photo paper must be
picked up from the output paper tray cover
one page at a time to avoid smudging.
2
Loading paper
Choosing the right print media
2
Paper type and size for each operation
Paper Type
Cut Sheet
Cards
Envelopes
Transparencies
Paper Size
2
Usage
Fax
Copy
Photo
Capture
Printer
A3
297  420 mm (11.7  16.5 in.)
Yes
Yes
Yes
Yes
A4
210  297 mm (8.3  11.7 in.)
Yes
Yes
Yes
Yes
Ledger
279.4  431.8 mm (11  17 in.)
Yes
Yes
Yes
Yes
Letter
215.9  279.4 mm (8 1/2  11 in.) Yes
Yes
Yes
Yes
Legal
215.9  355.6 mm (8 1/2  14 in.) Yes
Yes
–
Yes
Executive
184  267 mm (7 1/4  10 1/2 in.) –
–
–
Yes
JIS B4
257  364 mm (10.1  14.3 in.)
–
–
–
User
Defined
JIS B5
182  257 mm (7.2  10.1 in.)
–
–
–
User
Defined
A5
148  210 mm (5.8  8.3 in.)
–
Yes
–
Yes
A6
105  148 mm (4.1  5.8 in.)
–
–
–
Yes
Photo
10  15 cm (4  6 in.)
–
Yes
Yes
Yes
Photo L
89  127 mm (3 1/2  5 in.)
–
–
–
Yes
Photo 2L
13  18 cm (5  7 in.)
–
–
Yes
Yes
Index Card
127  203 mm (5  8 in.)
–
–
–
Yes
Postcard 1
100  148 mm (3.9  5.8 in.)
–
–
–
User
Defined
Postcard 2
(Double)
148  200 mm (5.8  7.9 in.)
–
–
–
User
Defined
C5 Envelope
162  229 mm (6.4  9 in.)
–
–
–
Yes
DL Envelope
110  220 mm (4.3  8.7 in.)
–
–
–
Yes
COM-10
105  241 mm (4 1/8  9 1/2 in.)
–
–
–
Yes
Monarch
98  191 mm (3 7/8  7 1/2 in.)
–
–
–
Yes
Y4 Envelope
105  235 mm (4.1  9.3 in.)
–
–
–
Yes
–
Yes
–
Yes
Letter
215.9  279.4 mm (8 1/2  11 in.) –
Yes
–
Yes
Legal
215.9  355.6 mm (8 1/2  14 in.) –
Yes
–
Yes
A5
148  210 mm (5.8  8.3 in.)
–
Yes
–
Yes
–
–
–
User
Defined
A4
Labels 1
1
2
210  297 mm (8.3  11.7 in.)
Manual Feed Slot only
27
Chapter 2
Paper capacity of the paper trays
2
Paper size
Paper types
No. of
sheets
A4, Ledger, A3, Legal, Executive,
Letter, A5, A6, JIS B4, JIS B5,
Envelopes (commercial No.10,
DL, C5, Monarch, Y4), Photo,
Photo L, Photo 2L, Index Card,
Postcard 1, Postcard 2
Plain Paper
250 1
Inkjet Paper
20
Glossy Paper, Photo
20
Index Card, Postcard
30
Envelopes, Transparencies
10
Tray #2
(MFC-J6710DW only)
A4, Ledger, A3, Legal, Executive,
Letter, JIS B4, JIS B5
Plain Paper
250 1
Manual Feed Slot
A4, Ledger, A3, Legal, Executive,
Letter, A5, A6, JIS B4, JIS B5,
Envelopes (commercial No.10,
DL, C5, Monarch, Y4), Photo,
Photo L, Photo 2L, Index Card,
Postcard 1, Postcard 2
Plain Paper, Inkjet Paper,
Glossy Paper, Envelopes,
Transparencies and Labels
1
Tray #1
1
Up to 250 sheets of 80 g/m 2 paper.
Paper weight and thickness
Paper Type
2
Weight
Thickness
Plain Paper
64 to 120 g/m2
0.08 to 0.15 mm
(Tray #2)
64 to 105 g/m2
0.08 to 0.15 mm
Inkjet Paper
64 to 200 g/m2
0.08 to 0.25 mm
Glossy Paper 1
Up to 220 g/m2
Up to 0.25 mm
Photo Card 1
Up to 220 g/m2
Up to 0.25 mm
Index Card
Up to 120 g/m2
Up to 0.15 mm
Postcard 1
Up to 200 g/m2
Up to 0.25 mm
Envelopes
75 to 95 g/m2
Up to 0.52 mm
Transparencies
–
–
Labels
–
–
Cut Sheet
Plain Paper
Cards
Postcard 2
1
28
BP71 (260 g/m2) paper is especially designed for Brother inkjet machines.
3
Loading documents
How to load
documents
Make sure documents written with ink are
completely dry.
3
a
You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the ADF
3
Unfold the ADF Document Support (1)
and the ADF Document Output Support
Flap (2).
1
2
3
The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard
80 g/m2 paper and always fan the pages
before putting them in the ADF.
Document Sizes Supported
3
Recommended Paper: 80 g/m2 A4
Length:
148 to 431.8 mm
Width:
148 to 297 mm
Weight:
64 to 90 g/m2
How to load documents
b
c
Fan the pages well.
Adjust the paper guides (1) to fit the
width of your documents.
3
1
IMPORTANT
• DO NOT pull on the document while it is
feeding.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
d
Place your documents, face up, top
edge first in the ADF until you feel them
touch the feed rollers.
IMPORTANT
DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
29
3
Chapter 3
Using the scanner glass
3
Note
You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Document Sizes Supported
Length:
Up to 431.8 mm
Width:
Up to 297 mm
Weight:
Up to 2 kg
How to load documents
To use the scanner glass, the ADF must
be empty.
3
a
b
Lift the document cover.
c
Close the document cover.
Using the document guidelines on the
left and top, place the document
face down in the upper left corner of the
scanner glass.
IMPORTANT
If you are scanning a book or thick
document, DO NOT slam the cover down
or press on it.
30
3
Loading documents
Scannable area
3
The scannable area depends on the settings
in the application you are using. The figures
below show unscannable areas.
3
4
3
1
2
Usage
Fax
Document
Size
Top (1)
Left (3)
Bottom (2)
Right (4)
A3
3 mm
4.5 mm
A4
3 mm
3 mm 1
Ledger
3 mm
3.7 mm
Letter
3 mm
4 mm
3 mm
3 mm
Legal
Copy
Scan
1
All paper
sizes
The unscannable area is 1 mm when you use the
ADF.
31
4
Sending a fax
How to send a fax
c
4
The following steps show how to send a fax.
a
4
When you want to send a fax, or change
fax send or receive settings, press the
(FAX) key to illuminate it in
blue.
You can change the following fax
sending settings. Press FAX and then
press a or b to scroll through the fax
settings. When the setting you want is
highlighted, then press d or c to choose
your option, and press OK.
(Basic User's Guide)
For details changing the following fax
sending settings, see pages 33 to 35.
 Glass ScanSize
 Colour Fax Transmission
 Preview Outgoing Fax
 Transmission Verification Report
(Setup)
 The LCD shows:
Fax
FAX
Press Start
Enter Number
Fax Resolution
Contrast
Glass ScanSize
b
Standard
Auto
A4
Do one of the following to load your
document:
 Place the document face up in the
ADF. (See Using the ADF
on page 29.)
 Load your document face down on
the scanner glass. (See Using the
scanner glass on page 30.)
(Advanced User's Guide)
For more advanced fax sending
operations and settings, see Chapter 3
Sending a fax in the Advanced User’s
Guide:
 Contrast
 Fax Resolution
 Set New Defaults
 Factory Reset
 Faxing at End of Call
 Broadcasting
 Real Time TX
 Overseas Mode
Note
• To send colour faxes with multiple pages
use the ADF.
• If you send a mono fax from the ADF when
the memory is full it will be sent in real time.
• You can use the scanner glass to fax
pages of a book one at a time. The
documents can be up to A3 or Ledger size.
• Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
32
 Delayed Fax
 Batch TX
 Canceling Waiting Jobs
 Polled Transmit
Sending a fax
d
Enter the fax number.
Using the dial pad
Using the Phone Book
 Phone Book
Using call history
 Outgoing Call
 Caller ID hist.
Note
You can preview a fax message before
sending it by setting Fax Preview to ON.
(See How to preview an outgoing fax
on page 34.)
e
Press Mono Start or Colour Start.
Faxing from the ADF
 The machine starts scanning the
document.
Faxing from the scanner glass
 When you press Mono Start, the
machine starts scanning the first
page.
Do one of the following:
• To send a single page, press 2 to
choose No(Send) (or press
Mono Start again).
The machine starts sending the
document.
• To send more than one page,
press 1 to choose Yes and place
the next page on the scanner
glass. Press OK. The machine
starts scanning the page. (Repeat
this step for each additional
page.)
 If you press Colour Start, the
machine starts sending the
document.
Stop faxing
4
To stop faxing, press Stop/Exit.
Setting scanner glass size for
faxing
4
When documents are Letter size, you need to
set Scan Size to Letter. If you do not, the side
portion of the faxes will be missing.
a
Press
b
Press a or b to choose
Glass ScanSize.
c
Press d or c to choose A4, A3, Letter,
Legal or Ledger.
Press OK.
4
(FAX).
Note
• You can save the setting you use most
often by setting it as default. (See Setting
your changes as a new default in
chapter 3 of the Advanced User’s Guide.)
• This setting is only available for sending
documents from the scanner glass.
Colour fax transmission
4
Your machine can send a colour fax to
machines that support this feature.
Colour faxes cannot be stored in the memory.
When you send a colour fax, the machine will
send it in real time (even if Real Time TX is
set to Off).
Cancelling a fax in progress
4
If you want to cancel a fax while the machine
is scanning, dialling or sending, press
Stop/Exit.
33
Chapter 4
How to preview an outgoing
fax
You can preview a fax message before you
send it. You must set the Real Time
Transmission and Polling RX to Off before
you use this feature.
a
Press
b
c
Load the document.
d
Press Fax Preview.
The machine starts scanning the
document and the outgoing fax appears
on the LCD. When the fax is open the
control panel keys will perform the
operations shown below.
(FAX).
Enter the fax number using the dial pad,
One Touch or Speed Dial.
Key
Description
Enlarge the fax.
Reduce the fax.
a or b
Scroll vertically.
d or c
Scroll horizontally.
Rotate the fax clockwise.
Go back to the previous page.
Go to the next page.
Note
If you preview a colour fax before it is sent,
you will only be able to send it in black &
white. To send a colour fax do not press
the Fax Preview key.
e
Press Mono Start.
Note
The fax message in the memory will be
sent and then erased when you press
Mono Start.
34
4
Transmission Verification
Report
You can use the Transmission Verification
Report as proof that you sent a fax. This
report lists the sender’s name or fax number,
the time and date of transmission, duration of
transmission, number of pages sent, and
whether or not the transmission was
successful.
There are several settings available for the
Transmission Verification Report:
 On: Prints a report after every fax you
send.
 On+Image: Prints a report after every fax
you send. A portion of the fax’s first page
appears on the report.
 Off: Prints a report if your fax is
unsuccessful due to a transmission error.
The report will also print if the receiving
machine modifies the size of the
document you fax. Off is the default
setting.
 Off+Image: Prints a report if your fax is
unsuccessful due to a transmission error.
The report will also print if your fax is
successful, but the receiving machine
modifies the size of the document you fax.
A portion of the fax’s first page appears on
the report.
 Off2: Prints a report only if your fax is
unsuccessful due to a transmission error.
 Off2+Image: Prints a report only if your
fax is unsuccessful due to a transmission
error. A portion of the fax’s first page
appears on the report.
4
Sending a fax
a
b
Press Menu.
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Report Setting.
Press OK.
d
e
Press a or b to choose XMIT Report.
f
Press d or c to choose On, On+Image,
Off, Off+Image, Off2 or
Off2+Image.
Press OK.
4
Press Stop/Exit.
Note
• If you choose On+Image, Off+Image or
Off2+Image the image will only appear
on the Transmission Verification Report if
Real Time Transmission is set to Off. (See
Real Time Transmission in chapter 3 of
the Advanced User’s Guide.)
• If your transmission is successful, "OK" will
appear next to "RESULT" on the
Transmission Verification Report. If
transmission is not successful, "ERROR"
will appear next to "RESULT".
35
5
Receiving a fax
5
Receive Modes
5
You must choose a receive mode depending on the external devices and telephone services you
have on your line.
Choose the Receive Mode
5
By default, your machine will automatically receive any faxes that are sent to it. The diagram below
will help you choose the correct mode.
For more detailed information on the receive modes, see Using Receive Modes on page 37.
Do you want to use the telephone features of your machine (if available) or
an external telephone or external telephone answering device connected on the
same line as the machine?
Yes
No
Are you using the voice message function of
an external telephone answering device?
Fax Only
No
Do you want the machine to answer fax and
telephone calls automatically?
No
Manual
Fax/Tel
Yes
External TAD
Yes
To set a receive mode follow the instructions below:
a
b
c
d
e
36
Press Menu.
Press a or b to choose Initial Setup.
Press OK.
Press a or b to choose Receive Mode.
Press d or c to choose Fax Only, Fax/Tel, External TAD or Manual.
Press OK.
Press Stop/Exit.
The LCD will display the current receive mode.
Receiving a fax
Using Receive Modes
5
External TAD
5
External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be dealt with in one
of the following ways:
Some receive modes answer automatically
(Fax Only and Fax/Tel). You may want to
change the ring delay before using these
modes. (See Ring Delay on page 38.)
 Faxes will be automatically received.
Fax Only
5
Fax Only mode will automatically answer
every call as a fax call.
Fax/Tel
 Voice callers can record a message on the
external TAD.
(For more information see Connecting an
external TAD (telephone answering device)
on page 44.)
5
Fax/Tel mode helps you automatically
manage incoming calls, by recognising
whether they are fax or voice calls and
dealing with them in one of the following
ways:
 Faxes will be automatically received.
 Voice calls will start the F/T Ring to tell you
to pick up the line. The F/T Ring is a fast
double-ring made by your machine.
(Also see F/T Ring Time (Fax/Tel mode only)
on page 38 and Ring Delay on page 38.)
Manual
5
Manual mode turns off all automatic
answering functions unless you are using the
BT Call Sign feature.
To receive a fax in manual mode lift the
handset of an external telephone. When you
hear fax tones (short repeating beeps), press
Mono Start or Colour Start and choose
Receive. You can also use the Fax Detect
feature to receive faxes by lifting a handset on
the same line as the machine.
(Also see Fax Detect on page 39.)
37
5
Chapter 5
Receive Mode settings
Ring Delay
The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine choose the maximum number of
rings.
(See Operation from external and extension
telephones on page 46 and Fax Detect
on page 39.)
a
b
Press Menu.
c
Press a or b to choose
Setup Receive.
Press OK.
d
e
f
Press a or b to choose Fax.
Press OK.
5
5
F/T Ring Time
(Fax/Tel mode only)
When somebody calls your machine, you and
your caller will hear the normal telephone ring
sound. The number of rings is set by the ring
delay setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T Ring (a fast
double-ring) for the time you have set in the
F/T Ring Time setting. If you hear the
F/T Ring it means that you have a voice caller
on the line.
Because the F/T Ring is made by the
machine, extension and external telephones
will not ring; however, you can still answer the
call on any telephone. (For more information
see Using remote codes on page 47.)
a
b
Press Menu.
Press d or c to choose how many times
the line rings before the machine
answers.
Press OK.
If you choose 0, the line will not ring at
all.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose
F/T Ring Time.
Press Stop/Exit.
e
Press d or c to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or
70 seconds).
Press OK.
f
Press Stop/Exit.
Press a or b to choose Ring Delay.
Press a or b to choose Fax.
Press OK.
Note
Even if the caller hangs up during the fast
double-ring, the machine will continue to
ring for the set time.
38
5
Receiving a fax
Fax Detect
If Fax Detect is On:
5
If you are at the machine and answer a fax
call by lifting the handset, press Mono Start
or Colour Start, then press 2 to receive the
fax.
If you answered at an extension or external
telephone, press l 5 1. (See Operation from
external and extension telephones
on page 46.)
Note
5
5
How to preview a received fax
The machine receives a fax call
automatically, even if you answer the call.
When you see Receiving on the LCD or
when you hear “chirps” through the handset
you are using, just replace the handset. Your
machine will do the rest.
If Fax Detect is Off:
Fax Preview
(Monochrome only)
You can view received faxes on the LCD by
pressing the Fax Preview key. When the
machine is in Ready mode, a popup message
will appear on the LCD to alert you of new
faxes.
5
Setting Fax Preview
a
b
5
Press Fax Preview.
Press 1 to choose Yes.
The LCD asks you again to confirm
because faxes will viewed instead of
automatically printed.
Press 1 to choose OK.
Note
• If this feature is set to On, but your
machine does not connect a fax call when
you lift an extension or external telephone
handset, press the remote activation code
l 5 1.
• When Fax Preview is turned on, a backup
copy of received faxes will not be printed
for Fax Forwarding and PC-Fax Receiving
operations, even if you have set Backup
Print to On.
• If you send faxes from a computer on the
same telephone line and the machine
intercepts them, set Fax Detect to Off.
• Fax Preview is not available when Fax
Forwarding is turned on.
a
b
Press Menu.
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Setup Receive.
Press OK.
d
e
Press a or b to choose Fax Detect.
f
5
Press d or c to choose On (or Off).
Press OK.
Press Stop/Exit.
39
5
Chapter 5
Using Fax Preview
5
When you receive a fax, you will see the popup message on the LCD. (For example:
New Fax(es): 02)
a
Press Fax Preview.
You can see the new fax list.
Note
When a fax is open the control panel keys will
perform the operations shown below.
Key
Description
Enlarge the fax.
Reduce the fax.
a or b
Scroll vertically.
d or c
Scroll horizontally.
• If you receive a fax containing multiple
paper sizes (for example, a page of A4
data and a page of A3 data), the machine
may create and store a file for each paper
size. The LCD may show that more than
one fax job has been received.
Rotate the fax clockwise.
• You can also see your old fax list by
pressing l. Press # to go back to your new
fax list.
Go to the next step.
b
Delete the fax.
Press 1 to confirm.
Go back to the previous page.
Go to the next page.
(Print, Back and Exit are
available.)
Go back to the fax list.
Press a or b to choose the fax you want
to see.
Press OK.
Note
Print the fax.
Do one of the following:
Mono Start
• If your fax is large there may be a delay
before it is displayed on the LCD.
 Press 2 to print only the
displayed page.
• The LCD will show the current page
number and total pages of the fax
message. When your fax message is over
99 pages the total number of pages will be
shown as “XX“.
c
Press Stop/Exit.
 Press 1 to print the whole
message.
 Press 3 to print from the
displayed page.
(After printing, you can choose
to delete or re-print the fax.)
How to delete all faxes in the list
a
b
Press Fax Preview.
c
Press Stop/Exit.
Press a or b to choose Delete All.
Press OK.
Press 1 to confirm.
How to print all faxes in the list
a
b
c
40
5
Press Fax Preview.
Press a or b to choose Print All.
Press OK.
Press Stop/Exit.
5
6
Telephone and external devices
Voice operations
Tone or Pulse
6
6
If you have a Pulse dialling service, but need
to send tone signals (for example, for
telephone banking), follow the instructions
below:
a
Pick up the handset of the external
telephone.
b
Press # on the machine’s control panel.
Any digits dialled after this will send tone
signals.
When the machine is in Fax/Tel mode, it will
use the F/T Ring (fast double-ring) to alert
you to pick up a voice call.
If you are at an external telephone, lift the
handset of the external telephone, and then
press Tel/R to answer.
If you are at an extension telephone, you'll
need to lift the handset during the F/T Ring
Time and then press # 5 1 between the fast
double-rings. If no one is on the line, or if
someone wants to send you a fax, send the
call back to the machine by pressing l 5 1.
6
The Caller ID feature lets you use the Caller
ID subscriber service offered by many local
telephone companies. Call your telephone
company for details. This service shows the
telephone number, or name if it is available,
of your caller as the line rings.
After a few rings, the LCD shows the
telephone number of your caller (and name, if
available). Once you answer a call, the Caller
ID information disappears from the LCD, but
the call information stays stored in the Caller
ID memory.
When you hang up, the machine will return to
the Pulse dialling service.
Fax/Tel mode
Caller ID
(U.K. and Ireland only)
6
6
You can view the list or choose one of these
numbers to fax to, add to One Touch or
Speed Dial, or delete from the history. (See
Caller ID history on page 51.)
 You can see the first 20 characters of the
number (or name).
 The ID Unknown message means the
call originated outside your Caller ID
service area.
 The ID Withheld message means the
caller has intentionally blocked
transmission of information.
You can print a list of the Caller ID information
received by your machine. (See How to print
a report in chapter 6 of the Advanced User’s
Guide.)
Note
The Caller ID service varies with different
carriers. Call your local telephone
company to find out about the kind of
service available in your area.
41
6
Chapter 6
Setting the Caller ID to On
If you have Caller ID on your line, then this
function should be set to On to display the
caller's telephone number on the LCD as the
telephone rings.
a
b
Press Menu.
c
Press a or b to choose
Miscellaneous.
Press OK.
d
e
f
Press a or b to choose Fax.
Press OK.
Press a or b to choose Caller ID.
Press d or c to choose On (or Off).
Press OK.
Press Stop/Exit.
6
Telephone services
Your machine supports the Caller ID
subscriber telephone service that some
telephone companies offer.
Features like Voice Mail, Call Waiting, Call
Waiting/Caller ID, answering services, alarm
systems or other custom features on one
telephone line may create problems with the
operation of your machine.
Note
Caller ID is available for U.K. and Ireland
only.
Setting the Telephone Line
Type
If you are connecting the machine to a line
that features PBX or ISDN to send and
receive faxes, it is also necessary to change
the Telephone Line Type accordingly by
completing the following steps.
a
b
Press Menu.
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose
Phone Line Set.
Press OK.
d
Press a or b to choose PBX, ISDN (or
Normal).
Press OK.
e
Do one of the following:
 If you choose PBX, go to step f.
 If you choose ISDN or Normal, go to
step i.
f
42
6
Press a or b to choose On or Always.
Press OK.
6
Telephone and external devices
Note
If you choose On, the machine dials a
prefix number before the fax number you
dial only when Tel/R is pressed.
If you choose Always, the machine
always automatically dials a prefix number
before the fax number.
g
Press a or b to choose Change.
Press OK.
h
Enter the prefix number on the dial pad.
Press OK.
i
Press Stop/Exit.
Note
• If your telephone system requires a timed
break recall (TBR), press Tel/R to enter
the break.
• You can use the numbers 0 to 9, #, l and
!. (Press Tel/R to display !.)
You cannot use ! with any other numbers
or characters.
PBX and TRANSFER
6
The machine is initially set to Normal, which
lets the machine connect to a standard PSTN
(Public Switched Telephone Network) line.
However, many offices use a central
telephone system or Private Branch
Exchange (PBX). Your machine can be
connected to most types of PBX. The
machine's recall feature supports timed break
recall only (TBR). TBR will work with most
PBX systems allowing you to gain access to
an outside line, or transfer calls to another
extension. The feature works when Tel/R is
pressed.
Note
You can program a Tel/R key press as
part of a number stored in a One Touch
Dial or Speed Dial location. When
programming the One Touch Dial or
Speed Dial number, press Tel/R first (the
LCD shows “!”), then enter the telephone
number. If you do this, you do not need to
press Tel/R each time before you dial
using a One Touch Dial or Speed Dial
location. (See Storing numbers
on page 52.) However, if PBX is not
chosen in the Telephone Line Type
setting, you cannot use the One Touch
Dial or Speed Dial number that the Tel/R
press is programmed into.
43
6
Chapter 6
Connecting an external
TAD (telephone
answering device)
You may choose to connect an external
answering device. However, when you have
an external TAD on the same telephone line
as the machine, the TAD answers all calls
and the machine “listens” for fax calling
(CNG) tones. If it hears them, the machine
takes over the call and receives the fax. If it
does not hear CNG tones, the machine lets
the TAD continue playing your outgoing
message so your caller can leave you a voice
message.
The TAD must answer within four rings (the
recommended setting is two rings). The
machine cannot hear CNG tones until the
TAD has answered the call, and with four
rings there are only 8 to 10 seconds of CNG
tones left for the fax “handshake”. Make sure
you carefully follow the instructions in this
guide for recording your outgoing message.
We do not recommend using the toll saver
feature on your external answering machine if
it exceeds five rings.
Note
1
1
TAD
When the TAD answers a call, the LCD
shows Telephone.
44
DO NOT connect a TAD elsewhere on the
same telephone line.
6
Connections settings
6
The external TAD must be connected as
shown in the previous illustration.
a
Set your external TAD to one or two
rings. (The machine's Ring Delay setting
does not apply.)
b
Record the outgoing message on your
external TAD.
c
d
Set the TAD to answer calls.
Set the Receive Mode to
External TAD. (See Choose the
Receive Mode on page 36.)
Recording an outgoing
message (OGM) on an
external TAD
Timing is important in recording this
message.
If you do not receive all your faxes,
shorten the Ring Delay setting on your
external TAD.
1
IMPORTANT
a
Record 5 seconds of silence at the
beginning of your message. (This allows
your machine time to listen for the fax
CNG tones of automatic transmissions
before they stop.)
b
Limit your speaking to 20 seconds.
Note
We recommend beginning your OGM with
an initial 5-second silence because the
machine cannot hear fax tones over a
resonant or loud voice. You may try
omitting this pause, but if your machine
has trouble receiving, then you must
re-record the OGM to include it.
6
Telephone and external devices
Multi-line connections (PBX)
We suggest you ask the company who
installed your PBX to connect your machine.
If you have a multi line system we suggest
you ask the installer to connect the unit to the
last line on the system. This prevents the
machine being activated each time the
system receives telephone calls. If all
incoming calls will be answered by a
switchboard operator we recommend that
you set the Receive Mode to Manual.
6
External and extension
telephones
Connecting an external or
extension telephone
Make sure the Telephone Line Type is set
to PBX. (See Setting the Telephone Line
Type on page 42.)
6
You can connect a separate telephone to
your machine as shown in the diagram below.
1
We cannot guarantee that your machine will
operate correctly under all circumstances
when connected to a PBX. Any difficulties
with sending or receiving faxes should be
reported first to the company who handles
your PBX.
Note
6
6
2
1
Extension telephone
2
External telephone
When you are using a telephone on the same
phone line, the LCD shows Telephone.
Note
Please make sure you use an external
telephone with a cable no more than
3 metres long.
45
Chapter 6
Operation from external and
extension telephones
6
If you answer a fax call on an extension or an
external telephone, you can make your
machine take the call by using the Remote
Activation Code. When you press the Remote
Activation Code l 5 1, the machine starts to
receive the fax.
Your premises may already be wired with
parallel extension telephones, or you may
plan to add extension telephones to your line,
as well as your machine. While the simplest
arrangement is a straightforward parallel
connection, there are some problems with
this arrangement, the most obvious of which
is inadvertent interruption of a facsimile
transmission caused by someone picking up
an extension telephone to make an outgoing
call. Also, remote activation code may not
operate reliably in such a simple
configuration.
If the machine answers a voice call and fast
double-rings for you to take over, use the
Remote Deactivation Code # 5 1 to take the
call at an extension telephone. (See F/T Ring
Time (Fax/Tel mode only) on page 38.)
If you answer a call and no one is on
the line:
You should assume that you're receiving a
manual fax.
Press l 5 1 and wait for the chirp or until the
LCD shows Receiving, and then hang up.
Note
You can also use the Fax Detect feature to
make your machine automatically take the
call. (See Fax Detect on page 39.)
Using extension telephones
(U.K. only)
6
This machine may also be set to make a
delayed transmission (i.e. a transmission at a
pre-set time). This pre-set job may coincide
with someone picking up an extension
handset.
These problems can easily be eliminated, if
you arrange modification of your extension
wiring circuit, such that extension devices are
connected “downstream” of your machine in
a master/slave configuration (see fig. 2). In
this configuration the machine can always
detect whether a telephone is in use. Thus it
will not attempt to seize the line during that
time. This is known as “telephone off-hook
detection.”
The inadvisable configuration is shown in
figure 1, and the recommended master/slave
configuration is shown in figure 2.
This new connection configuration can be
arranged by contacting BT, Kingston upon
Hull Telecommunications, your PBX
maintainer or a qualified telephone
installation company as appropriate. Simply
explained, the extension telephone circuit
should be terminated on a normal modular
plug (BT 431A style), which in turn should be
put into the modular socket of the white “T”shaped connector provided as part of the line
cord assembly.
46
6
Telephone and external devices
Inadvisable connection of extension
sockets (Fig. 1.)
1
2
1
6
3
Extension socket
2
Master socket
3
Incoming line
If you let the machine answer first, you will
have to go to the machine so you can press
Tel/R to send the call to the cordless handset.
Recommended connection of extension
sockets (Fig. 2.)
1
1
2
3
FAX
1
Extension socket
2
Master socket
3
Incoming line
6
Once the base unit of the cordless telephone
has been connected to the same telephone
line as the machine (see External and
extension telephones on page 45), it is easier
to answer calls during the Ring Delay if you
carry the cordless handset around with you.
FAX
1
Using a cordless external
telephone
The fax machine must be plugged into the
master socket.
Note
These telephones are now connected as
external devices (see Connecting an
external or extension telephone
on page 45), because they are connected
to the fax machine via the T-connector.
Using remote codes
6
6
6
Remote Activation code
6
If you answer a fax call on an extension or
external telephone, you can tell your machine
to receive it by dialling the Remote Activation
Code l 5 1. Wait for the chirping sounds then
replace the handset. (See Fax Detect
on page 39.)
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Mono Start and
choose Receive.
Remote Deactivation Code
6
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T Ring
(fast double-ring), after the initial ring delay. If
you pick up the call on an extension
telephone you can turn the F/T Ring off by
pressing # 5 1 (make sure you press this
between the rings).
If the machine answers a voice call and fast
double-rings for you to take over, you can
take the call at the external telephone by
pressing Tel/R.
47
Chapter 6
Changing the remote codes
6
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 5 1. The preset
Remote Deactivation Code is # 5 1. If you
want to, you can replace them with your own
codes.
a
b
Press Menu.
c
Press a or b to choose
Setup Receive.
Press OK.
d
e
Press a or b to choose Remote Codes.
Press a or b to choose Fax.
Press OK.
Press d or c to choose On (or Off).
Press OK.
f
Enter the new Remote Activation Code.
Press OK.
g
Press a or b to choose Deact.Code:
and enter the new Remote Deactivation
Code.
Press OK.
h
Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, l,
#.
• Remote Codes might not work with some
telephone systems.
48
7
Dialling and storing numbers
How to dial
Manual dialling
7
Speed Dialling
7
a
Press
7
7
(Phone Book).
Press all of the digits of the fax or telephone
number.
You can also choose Phone Book by
pressing
(FAX).
One Touch Dialling
Your machine has 8 One Touch keys where
you can store 16 fax or telephone numbers
for automatic dialling.
7
b
Press a or b to choose Search.
Press OK.
c
Do one of the following:
7
 Press a or b to choose
Alphabetic Order or
Numeric Order.
Press OK.
If you have two numbers in the
location, press a or b to choose the
number you want to call.
Press OK.
 Enter the 2-digit Speed Dial number
using the dial pad. (See Storing
Speed Dial numbers on page 53.)
Press the One Touch key that stores the
number you want to call. (See Storing
One Touch Dial numbers on page 52.) To
access numbers 9 to 16, hold down Shift as
you press the One Touch key.
Note
If the LCD shows Not Registered
when you enter or search a Speed Dial
number that has not been stored at this
location.
49
Chapter 7
Search
7
You can search for names you have stored in
the One Touch and Speed Dial memory.
a
Press
(Phone Book).
You can also choose Phone Book by
pressing
(FAX).
b
Press a or b to choose Search.
Press OK.
c
Press a or b to choose
Alphabetic Order or
Numeric Order.
Press OK.
Note
Fax Redial
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Mono Start or Colour Start to try again. If
you want to make a second call to a number
you recently dialled, you can press
Redial/Pause and choose one of the last 30
numbers from the Outgoing Call List.
Redial/Pause only works if you dialled from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial up to three
times at five minute intervals.
a
b
• Press l to make the LCD font size larger.
• Press # to make the LCD font size smaller.
d
50
If you chose Alphabetic Order in
step c, use the dial pad to enter the first
letter of the name, and then press a or b
to choose the name and number you
want to call.
Press OK.
Press Redial/Pause.
Press a or b to choose the number you
want to redial.
Press OK.
c
Press a or b to choose Send a fax.
Press OK.
d
Press Mono Start or Colour Start.
Note
In Real Time Transmission the automatic
redial feature does not work when using
the scanner glass.
7
Dialling and storing numbers
Additional Dialling
Operations
Outgoing Call history
The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
One Touch or Speed Dial, or delete from the
history.
a
b
c
Press Redial/Pause.
You can also choose Outgoing Call
by pressing
(FAX).
Press a or b to choose the number you
want.
Press OK.
Do one of the following:
 To send a fax, press a or b to choose
Send a fax.
Caller ID history
7
7
This feature requires the Caller ID subscriber
service offered by many local telephone
companies. (See Caller ID (U.K. and Ireland
only) on page 41.)
The numbers, or names if available, from the
last 30 faxes and telephone calls you
received will be stored in the Caller ID history.
You can view the list or choose one of these
numbers to fax to, add to One Touch or
Speed Dial, or delete from the history. When
the thirty-first call comes into the machine, it
replaces information about the first call.
Note
If you are not a Caller ID subscriber, you
can still view call dates from the Caller ID
history, and delete entries from the list.
a
 If you want to store the number,
press a or b to choose
Add To Phone Book.
Press OK.
(See Storing One Touch numbers
from Outgoing Calls or Storing
Speed Dial numbers from Outgoing
Calls in chapter 5 of the Advanced
User’s Guide.)
 Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
d
Press Stop/Exit.
Press Redial/Pause and press l.
You can also choose
Caller ID hist. by pressing
(FAX).
Press OK.
Press Mono Start or Colour Start.
7
b
Press a or b to choose the number you
want.
Press OK.
c
Do one of the following:
 To send a fax, press a or b to choose
Send a fax.
Press OK.
Press Mono Start or Colour Start.
 If you want to store the number,
press a or b to choose
Add To Phone Book.
Press OK.
(See Storing One Touch numbers
from the Caller ID history or Storing
Speed Dial numbers from the Caller
ID history in chapter 5 of the
Advanced User’s Guide.)
 If you want to delete the number,
press a or b to choose Delete.
Press OK.
Press 1 to confirm.
51
7
Chapter 7
d
Press Stop/Exit.
Note
You can print the Caller ID list.
(See How to print a report in chapter 6 of
the Advanced User’s Guide.)
Storing numbers
7
You can set up your machine to do the
following types of easy dialling: One Touch,
Speed Dial and Groups for broadcasting
faxes. When you dial a Quick Dial number,
the LCD shows the number.
Note
If you lose electrical power, the Quick Dial
numbers that are in the memory will not be
lost.
Storing a pause
7
Press Redial/Pause to put a 3.5-second
pause between numbers. If you are dialling
overseas, you can press Redial/Pause as
many times as needed to increase the length
of the pause.
Storing One Touch Dial
numbers
Your machine has 8 One Touch keys where
you can store 16 fax or telephone numbers
for automatic dialling. To access numbers 9
to 16 hold down Shift as you press the
One Touch key.
a
Press the One Touch key where you
want to store the number.
Press 1 to choose Yes.
Note
You can also store one Touch Dial
numbers pressing
(Phone Book).
Press a or b to choose Set One Touch.
Press OK.
Press a or b to choose the location where
you want to store the number.
Press OK.
52
7
Dialling and storing numbers
b
Do one of the following:
c
Press a or b to choose the Speed Dial
location where you want to store the
number.
Press OK.
d
Do one of the following:
 Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 124.)
 Enter the name (up to 16 characters)
using the dial pad.
 To store the number without a name,
press OK.
c
Press OK.
(To help you enter letters, see
Entering Text on page 124.)
Enter the fax or telephone number (up to
20 digits).
Press OK.
 To store the number without a name,
press OK.
Note
If you downloaded Internet Fax:
If you want to store an E-mail address to
use with Internet fax or Scan to E-mail
server, press a to choose Dial Type,
and then press d or c to change the option
to E-Address. Press b to choose
FAX/TEL/MAIL and then enter the E-mail
address. (See Entering Text
on page 124.)
d
Press a or b to choose Complete.
Press OK.
e
Press Stop/Exit.
Storing Speed Dial numbers
Names and numbers can be stored as
two-digit Speed Dial locations. You can store
up to 100 different Speed Dial locations.
When you dial you will only have to press a
e
Enter the fax or telephone number (up to
20 digits).
Press OK.
f
Do one of the following:
7
 Enter the second fax or telephone
number (up to 20 digits).
Press OK.
 If you do not want to store a second
number, press OK.
7
g
Press a or b to choose Complete.
Press OK.
h
Do one of the following:
 To store another Speed Dial
number, go to step c.
 If you are finished storing numbers,
press Stop/Exit.
few keys (for example:
(Phone Book),
Search, OK, the two-digit number, and
Mono Start or Colour Start).
a
b
Press
(Phone Book).
Press a or b to choose
Set Speed Dial.
Press OK.
53
Chapter 7
Changing One Touch or
Speed Dial names or
numbers
f
 If you want to change the first
Fax/Tel number, press a or b to
choose Fax/Tel: (One Touch Dial)
or Fax/Tel1: (Speed Dial), then
press c and enter the new fax or
telephone number using the dial pad
(up to 20 digits).
Press OK.
7
You can change a One Touch or Speed Dial
name or number that has already been
stored.
a
Press
b
Press a or b to choose
Set One Touch or
Set Speed Dial.
Press OK.
c
Press a or b to choose the 2-digit One
Touch or Speed Dial location you want
to change.
Press OK.
d
(Phone Book).
 If you want to change both numbers
in this Speed Dial location, repeat
this step and choose the other
number.
 Press a or b to choose Change.
Press OK.
g
 Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
Go to step h.
Press a or b to choose Complete.
Press OK.
h
Press Stop/Exit.
How to change the stored name or
number:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press Clear. Re-enter the character.
54
 If you want to change the second
Fax/Tel number, press a or b to
choose Fax/Tel2: (Speed Dial),
then press c and enter the new fax or
telephone number using the dial pad
(up to 20 digits).
Press OK.
Do one of the following:
Note
e
If you want to change a Fax/Tel number,
do one of the following:
If you want to change the name, press
a or b to choose Name, then press c and
enter the new name using the dial pad
(up to 16 characters).
Press OK.
(See Entering Text on page 124.)
8
Making copies
8
b
How to copy
8
Do one of the following to load your
document:
The following steps show the basic copy
operation. For details about each option, see
the Advanced User’s Guide.
 Place the document face up in the
ADF.
a
 Place the document face down on
the scanner glass.
(See Using the ADF on page 29.)
Make sure you are in copy mode, press
(COPY) to illuminate it in blue.
(See Using the scanner glass
on page 30.)
c
If you want more than one copy, enter
the number (up to 99).
d
Press Mono Start or Colour Start.
Stop copying
 The LCD shows:
8
To stop copying, press Stop/Exit.
Copy
COPY
01
Quality
Paper Type
Paper Size
1
8
Press Start
1
Normal
Plain Paper
A4
No. of Copies
You can enter the number of copies you
want by using the dial pad.
Note
The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer in
chapter 1 of the Advanced User’s Guide.)
Copy settings
8
You can change the following copy settings.
Press COPY and then press a or b to scroll
through the copy settings. When the setting
you want is highlighted, then press d or c to
choose your option, and press OK.
(Basic User's Guide)
For details about changing the following copy
settings, see page 56.
 Paper Type
 Paper Size
 Tray Select (MFC-J6710DW)
(Advanced User’s Guide)
55
Chapter 8
f
For details about changing the following copy
settings, see chapter 7:
 Quality
 Enlarge/Reduce
Paper Size
 Page Layout
 Stack/Sort
 Density
 Ink Save Mode
a
b
c
d
e
 Thin Paper Copy
 Skew Adjustment
 Book Copy
 Watermark Copy
 Duplex Copy
 Set New Default
 Factory Reset
f
Note
If you want to sort copies, use the ADF.
Paper Options
Paper Type
56
8
8
If you are copying on special paper, set the
machine for the type of paper you are using to
get the best print quality.
Press
8
If you are copying on paper other than A4
size, you will need to change the paper size
setting. You can copy only on A4, A5, A3,
Photo 10  15 cm, Letter, Legal or Ledger
paper.
 2 in 1 (ID)
a
b
c
d
e
If you do not want to change additional
settings, press Mono Start or
Colour Start.
(COPY).
Load your document.
Enter the number of copies you want.
Press a or b to choose Paper Type.
Press d or c to choose Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61, Other Glossy or
Transparency.
Press OK.
Press
(COPY).
Load your document.
Enter the number of copies you want.
Press a or b to choose Paper Size.
Press d or c to choose A4, A5, A3,
10x15cm, Letter, Legal or Ledger.
Press OK.
If you do not want to change additional
settings, press Mono Start or
Colour Start.
Tray Select (MFC-J6710DW only)
You can change the tray temporarily for the
next copy. To change the default tray setting
see Tray use in Copy mode (MFC-J6710DW
only) on page 23.
a
b
c
d
e
Press
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
(COPY).
Load your document.
Enter the number of copies you want.
Press a or b to choose Tray Select.
Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
8
9
Printing photos from a memory
card or USB Flash memory drive
PhotoCapture Center™
operations
9
9
Even if your machine is not connected to your
computer, you can print photos directly from
digital camera media or a USB Flash memory
drive. (See Print Images on page 60.)
You can scan documents and save them
directly to a memory card or USB Flash
memory drive. (See How to scan to a memory
card or USB Flash memory drive
on page 61.)
If your machine is connected to a computer,
you can access a memory card or USB Flash
memory drive that is inserted in the front of
the machine from your computer.
(See PhotoCapture Center™ for Windows® or
Remote Setup & PhotoCapture Center™ for
Macintosh in the Software User’s Guide.)
Using a memory card or USB
Flash memory drive
9
9
Your Brother machine has media drives
(slots) for use with the following popular
digital camera media: Memory Stick™,
Memory Stick PRO™, Memory Stick Duo™,
Memory Stick PRO Duo™, SD, SDHC,
MultiMedia Card, MultiMedia Card plus and
USB Flash memory drives.
The PhotoCapture Center™ feature lets you
print digital photos from your digital camera at
high resolution to get photo quality printing.
57
Chapter 9
Getting started
9
Firmly put a memory card or USB Flash memory drive into the correct slot.
1
2
1 USB Flash memory drive
IMPORTANT
The USB direct interface supports only a USB Flash
memory drive, a PictBridge compatible camera, or a
digital camera that uses the USB mass storage standard.
Any other USB devices are not supported.
2 Memory card slot
Slot
Upper slot
Compatible memory cards
Memory Stick™
Memory Stick PRO™
Memory Stick Duo™
Memory Stick PRO Duo™
Memory Stick Micro™
(Adapter required)
Lower slot
SD
SDHC
MultiMedia Card
MultiMedia Card plus
mini SD (Adapter required)
micro SD (Adapter required)
mini SDHC (Adapter required)
micro SDHC (Adapter required)
MultiMedia Card mobile
(Adapter required)
58
Printing photos from a memory card or USB Flash memory drive
IMPORTANT
DO NOT insert a Memory Stick Duo™ into the lower SD slot, this may cause damage to the
machine.
PHOTO CAPTURE key indications:
 PHOTO CAPTURE light is on, the memory card or USB Flash memory drive is correctly
inserted.
 PHOTO CAPTURE light is off, the memory card or USB Flash memory drive is not correctly
inserted.
 PHOTO CAPTURE light is blinking, the memory card or USB Flash memory drive is being read
or written to.
IMPORTANT
DO NOT unplug the power cord or remove the memory card or USB Flash memory drive from
the media drive (slot) or USB direct interface while the machine is reading or writing to the
memory card or USB Flash memory drive (the PHOTO CAPTURE key is blinking). You will
lose your data or damage the card.
The machine can only read one device at a time.
59
9
Chapter 9
Print Images
View Photos
9
9
You can preview your photos on the LCD
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the LCD.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose
View Photo(s).
Press OK.
c
d
Press d or c to choose your photo.
e
Enter the number of copies you want
using the dial pad.
Press Clear to go back to the previous
level.
60
You can change the print settings
temporarily.
The machine returns to its default settings
after 3 minutes, or if the Mode Timer returns
the machine to Fax mode. (See Mode Timer
in chapter 1 of the Advanced User’s Guide.)
Note
You can save the print settings you use
most often by setting them as the default.
(See Setting your changes as a new
default in chapter 8 of the Advanced
User’s Guide.)
Print Setting
1
After you have chosen all the photos, do
one of the following:
1
Print
Press Start
0001
Print Quality
Paper Type
Paper Size
Repeat step c and step d until you
have chosen all the photos.
Note
f
PhotoCapture Center™
print settings
Photo
Other Glossy
10x15cm
No. of prints
(For View Photo(s), Search by Date, Slide
Show)
You can see the total number of photos that will
be printed.
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 60.)
(For Print All Photos, Print Photos, Enhance
Photos, Trimming)
You can see the number of copies of each
photo that will be printed.
 If you do not want to change any
settings, press Colour Start to print.
(For DPOF printing) This does not appear.
9
Printing photos from a memory card or USB Flash memory drive
How to scan to a
memory card or USB
Flash memory drive
You can scan monochrome and colour
documents onto a memory card or USB Flash
memory drive. Monochrome documents will
be stored in PDF (*.PDF) or TIFF (*.TIF) file
formats. Colour documents may be stored in
PDF (*.PDF) or JPEG (*.JPG) file formats.
The factory setting is Color 200 and the
default file format is PDF. The machine
automatically creates file names based on
the current date. (For details, see the Quick
Setup Guide.) For example, the fifth image
scanned on July 1, 2011 would be named
01071105.PDF. You can change the colour
and quality.
9
c
When you want to scan to a memory
card or USB Flash memory drive, press
(SCAN).
d
Press a or b to choose
Scan to Media.
SCAN
Select & Press
Scan a document
directly to a media
card or
USB flash
memory.
OK
Scan to File
Scan to Media
Scan to Network
Scan to FTP
OK
Press OK.
e
Do one of the following:
 To change the quality, press a or b to
choose Quality.
Go to step f.
Quality
Selectable File
Format
Color 100
JPEG / PDF
Color 200
JPEG / PDF
Color 300
JPEG / PDF
Color 600
JPEG / PDF
B/W 100
TIFF / PDF
B/W 200
TIFF / PDF
B/W 300
TIFF / PDF
a
f
Press d or c to choose Color 100,
Color 200, Color 300, Color 600,
B/W 100, B/W 200 or B/W 300.
Press OK.
g
Do one of the following:
 To change the file type, go to step h.
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while
PHOTO CAPTURE is blinking to avoid
damaging the card, USB Flash memory
drive or data stored on them.
b
 Press Mono Start or Colour Start to
start scanning without changing
additional settings.
Load your document.
 Press Mono Start or Colour Start to
start scanning without changing
additional settings.
h
Press a or b to choose File Type.
Press d or c to choose JPEG, PDF or
TIFF.
Press OK.
Note
• If you chose a Color resolution in step f,
you cannot choose TIFF.
• If you chose a B/W resolution in step f,
you cannot choose JPEG.
61
9
Chapter 9
i
Do one of the following:
 To change the file name, go to
step j.
 Press Mono Start or Colour Start to
start scanning without changing
additional settings.
Note
If you are using the scanner glass of the
machine you can change the glass scan
size.
Press a or b to choose Glass ScanSize
and d or c to choose A4, A3, Letter,
Legal or Ledger.
j
The file name is assigned automatically;
however, you can enter a name of your
choice using the dial pad.
Press a or b to choose File Name.
Enter the new name. (See Entering Text
on page 124.)
You can only change the first
6 characters.
Press OK.
Note
Press Clear to delete the current name.
k
Press Mono Start or Colour Start.
Note
You can place multiple documents on the
scanner glass and scan them as separate
files. (See Auto Crop in chapter 8 of the
Advanced User’s Guide.)
62
10
How to print from a computer
Printing a document
10
10
The machine can receive data from your
computer and print it. To print from a
computer, install the printer driver.
(See Printing for Windows® or Printing and
Faxing for Macintosh in the Software User’s
Guide for details about the print settings.)
a
Install the Brother printer driver on the
Installation CD-ROM. (See the Quick
Setup Guide.)
b
From your application, choose the Print
command.
c
Choose the name of your machine in the
Print dialog box and click Properties.
d
Choose the settings you want in the
Properties dialog box.
 Media Type
 Print Quality
10
 Paper Size
 Orientation
 Colour/Greyscale
 Ink Save Mode
 Scaling
e
f
Click OK.
Click OK to begin printing.
63
11
How to scan to a computer
Scanning a document
11
There are several ways to scan documents.
You can use the SCAN key on the machine or
the scanner drivers on your computer.
a
b
To use the machine as a scanner, install
a scanner driver. If the machine is on a
Network, configure it with a TCP/IP
address.
a
Press
b
Choose the scan mode you want.
(SCAN).
 Scan to File
 Configure the machine with a TCP/IP
address if network scanning does not
work. (See Configuring Network
Scanning in the Software User’s
Guide.)
 Scan to FTP
 Scan to Media
 Scan to Network
 Scan to E-mail
 Scan to OCR 1
 Scan to Image
1
Load your document. (See How to load
documents on page 29.)
 Use the scanner glass to scan a
page of a book or one sheet at a
time.
Do one of the following:
 To scan using the SCAN key, go to
Scanning using the scan key.
 To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver.
64
For more information, see Using the Scan
key in the Software User’s Guide.
 Install the scanner drivers on the
Installation CD-ROM. (See the Quick
Setup Guide and Scanning in the
Software User’s Guide.)
 Use the ADF to scan multiple pages
of documents. It feeds each sheet
automatically.
c
Scanning using the
scan key
(Macintosh users)
Presto! PageManager must be downloaded
and installed before use. See Accessing
Brother Support (Macintosh) on page 3 for
further instructions.
c
(For network users)
Choose the computer you want to send
the data to.
d
Press Start to begin scanning.
11
11
How to scan to a computer
Scanning using a
scanner driver
11
For more information, see Scanning a
document using the TWAIN driver or
Scanning a document using the WIA driver in
the Software User’s Guide.
a
Start a scanning application and click
the Scan button.
b
Adjust the settings such as Resolution,
Brightness and Scan Type in the
Scanner Setup dialog box.
c
Click Start or Scan to begin scanning.
11
65
A
Routine maintenance
Replacing the ink
cartridges
Your machine is equipped with an ink dot
counter. The ink dot counter automatically
monitors the level of ink in each of the
four cartridges. When the machine detects an
ink cartridge is running out of ink, the machine
will tell you with a message on the LCD.
a
Open the ink cartridge cover.
If one or more of the ink cartridges have
reached the end of their life, the LCD
shows B&W Print Only or
Cannot Print.
b
Press the lock release lever as shown to
release the cartridge indicated on the
LCD. Remove the cartridge from the
machine.
c
Open the new ink cartridge bag for the
colour shown on the LCD, and then take
out the ink cartridge.
A
The LCD will tell you which ink cartridge is low
or needs replacing. Be sure to follow the LCD
prompts to replace the ink cartridges in the
correct order.
Even though the machine tells you to replace
an ink cartridge, there will be a small amount
of ink left in the ink cartridge. It is necessary
to keep some ink in the ink cartridge to
prevent air from drying out and damaging the
print head assembly.
IMPORTANT
Brother multifunction machines are
designed to work with ink of a particular
specification and will work to a level of
optimum performance and reliability when
used with Brother Original ink cartridges.
Brother cannot guarantee this optimum
performance and reliability if ink or ink
cartridges of other specifications are
used. Brother does not therefore
recommend the use of cartridges other
than Brother Original cartridges or the
refilling of used cartridges with ink from
other sources. If damage is caused to the
print head or other parts of this machine
as a result of using incompatible products
with this machine, any repairs required as
a result may not be covered by the
warranty.
66
A
Routine maintenance
d
Turn the green release lever on the
orange protective packing (1) clockwise
until it clicks to release the vacuum seal.
Then remove the orange protective
packing as shown.
f
Gently push the back of the ink cartridge
marked “PUSH” until it clicks, and then
close the ink cartridge cover.
g
The machine will automatically reset the
ink dot counter.
1
Note
1
e
Each colour has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.
• If you replaced an ink cartridge, for
example Black, the LCD may ask you to
verify that it was a brand new one (for
example, Did You Change
Black).
For each new cartridge you installed,
press 1 (Yes) to automatically reset the
ink dot counter for that colour. If the ink
cartridge you installed is not a brand new
one, be sure to press 2 (No).
• If the LCD shows No Ink Cartridge or
Cannot Detect after you install the ink
cartridges, check that the ink cartridges
are installed correctly.
CAUTION
If ink gets in your eyes, wash it out with
water at once and call a doctor if you are
concerned.
67
A
IMPORTANT
• DO NOT take out ink cartridges if you do
not need to replace them. If you do so, it
may reduce the ink quantity and the
machine will not know the quantity of ink
left in the cartridge.
• DO NOT touch the cartridge insertion
slots. If you do so, the ink may stain your
skin.
• If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
Cleaning and checking
the machine
Cleaning the scanner glass
a
Unplug the machine from the electrical
socket.
b
Lift the document cover (1). Clean the
scanner glass (2) and the white
plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass
cleaner.
• If you mix the colours by installing an ink
cartridge in the wrong position, clean the
print head several times after correcting
the cartridge installation.
1
• Once you open an ink cartridge, install it in
the machine and use it up within six
months of installation. Use unopened ink
cartridges by the expiration date written on
the cartridge package.
3
• DO NOT dismantle or tamper with the ink
cartridge, this can cause the ink to leak out
of the cartridge.
2
c
In the ADF unit, clean the white bar (1)
and the glass strip (2) with a lint-free
cloth moistened with a non-flammable
glass cleaner.
1
2
d
68
Re-connect the power cord.
A
A
Routine maintenance
Cleaning the print head
Note
In addition to cleaning the glass strip with
a non-flammable glass cleaner, run your
finger tip over the glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the glass strip again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning attempt.
A
To maintain good print quality, the machine
will automatically clean the print head when
needed. You can start the cleaning process
manually if there is a print quality problem.
Clean the print head and ink cartridges if you
get a horizontal line in the text or graphics, or
blank text on your printed pages. You can
clean Black only, three colours at a time
(Yellow/Cyan/Magenta), or all four colours at
once.
Cleaning the print head consumes ink.
Cleaning too often uses ink unnecessarily.
i
IMPORTANT
When there is a
spot of dirt or
correction fluid
on the glass strip
the printed
sample shows a
vertical line.
After the glass
strip is cleaned
the vertical line is
gone.
DO NOT touch the print head. Touching
the print head may cause permanent
damage and may void the print head's
warranty.
a
b
Press Menu.
Press a or b to choose
Ink Management.
Press OK.
c
Press a or b to choose Cleaning.
Press OK.
d
Press a or b to choose Black, Color or
All.
Press OK.
The machine cleans the print head.
When cleaning is finished, the machine
will go back to the standby mode
automatically.
Note
If you clean the print head at least five
times and the print has not improved, try
installing a new Brother Original
Innobella™ ink cartridge for each problem
colour. Try cleaning the print head again
up to five more times. If the print has not
improved call your Brother dealer.
69
A
Checking the print quality
If faded or streaked colours and text appear
on your output, some of the nozzles may be
clogged. You can check this by printing the
Print Quality Check Sheet and looking at the
nozzle check pattern.
a
b
A
i
The LCD asks you if you want to start
cleaning.
Press 1 (Yes).
The machine starts cleaning the print
head.
j
After cleaning is finished, press
Colour Start.
The machine starts printing the Print
Quality Check Sheet again. Return to
step f.
k
Press Stop/Exit.
If you repeat this procedure at least five
times and the print quality is still poor,
replace the ink cartridge for the clogged
colour.
After replacing the ink cartridge, check
the print quality. If the problem still
exists, repeat the cleaning and test print
procedures at least five times for the
new ink cartridge. If ink is still missing,
call your Brother dealer.
Press Menu.
Press a or b to choose
Ink Management.
Press OK.
c
Press a or b to choose Test Print.
Press OK.
d
Press a or b to choose
Print Quality.
Press OK.
e
Press Colour Start.
The machine begins printing the Print
Quality Check Sheet.
f
Check the quality of the four colour
blocks on the sheet.
g
The LCD asks you if the print quality is
OK.
Do one of the following:
 If all lines are clear and visible, press
1 (Yes) to finish the Print Quality
check and go to step k.
IMPORTANT
DO NOT touch the print head. Touching
the print head may cause permanent
damage and may void the print head's
warranty.
Note
 If you can see missing short lines as
shown below, press 2 to choose No.
OK
h
70
i
Poor
The LCD asks you if the print quality is
OK for black and the three colours.
Press 1 (Yes) or 2 (No).
When a print head
nozzle is clogged
the printed
sample looks like
this.
After the print
head nozzle is
cleaned, the
horizontal lines
are gone.
Routine maintenance
Checking the print alignment
A
You may need to adjust the print alignment
after transporting the machine, if your printed
text becomes blurred or images become
faded.
a
b
Press Menu.
Press a or b to choose
Ink Management.
Press OK.
c
Press a or b to choose Test Print.
Press OK.
d
Press a or b to choose Alignment.
Press OK.
e
Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
f
For the “A” pattern, press the number of
the test print that has the least visible
vertical stripes (1-9).
g
For the “B” pattern, press the number of
the test print that has the least visible
vertical stripes (1-9).
h
For the “C” pattern, press the number of
the test print that has the least visible
vertical stripes (1-9).
i
For the “D” pattern, press the number of
the test print that has the least visible
vertical stripes (1-9).
j
Press Stop/Exit.
A
71
B
Troubleshooting
B
Error and Maintenance messages
As with any sophisticated office product, errors may occur and consumable items may need to be
replaced. If this happens, your machine identifies the error and shows an error message. The
most common error and maintenance messages are shown below.
You can correct most errors and routine maintenance by yourself. If you need more help, the
Brother Solutions Center offers the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com/.
Error Message
Cause
Action
B&W Print Only
One or more of the colour ink cartridges
have reached the end of their life.
Replace the ink cartridges. (See
Replacing the ink cartridges
on page 66.)
Replace Ink
You can use the machine in
monochrome mode for approximately
four weeks depending on the number
of pages you print.
While this message appears on the
LCD, each operation works in the
following way:
 Printing
If you click Greyscale in the
Advanced tab of the printer driver
you can use the machine as a
monochrome printer.
 Copying
If the paper type is set to
Plain Paper you can make
copies in monochrome.
Duplex copy is not available when
this message appears.
 Faxing
If the paper type is set to
Plain Paper or Inkjet Paper,
the machine will receive and print
the faxes in monochrome.
If a sending machine has a colour
fax, the machine’s “handshake”
will ask that the fax be sent as
monochrome.
If the paper type is set to
Other Glossy, Brother BP71 or
Brother BP61 the machine will stop
all print operations.
72
If you unplug the machine, or take out
the ink cartridge, you cannot use the
machine until you change to a new ink
cartridge.
B
Troubleshooting
Error Message
Cause
Action
BT Call Sign On
BT Call Sign is set to ON. You cannot
change the Receive Mode from
Manual to another mode.
Set BT Call Sign to OFF. (See BT Call
Sign (U.K. only) in chapter 5 of the
Advanced User’s Guide.)
You installed a new ink cartridge too
quickly and the machine did not detect
it.
Take out the new ink cartridge and
re-install it slowly until it clicks.
If you are using non Brother Original
ink the machine may not detect the ink
cartridge.
Replace the cartridge with a Brother
Original ink cartridge. If the error
message remains, contact your
Brother dealer.
An ink cartridge is not installed
correctly.
Take out the new ink cartridge and
re-install it slowly until it clicks. (See
Replacing the ink cartridges
on page 66.)
One or more of the ink cartridges have
reached the end of their life. The
machine will stop all print operations.
While memory is available,
monochrome faxes will be stored in
the memory. If a sending machine has
a colour fax, the machine's
“handshake” will ask that the fax be
sent as monochrome.
Replace the ink cartridges. (See
Replacing the ink cartridges
on page 66.)
Comm.Error
Poor telephone line quality caused a
communication error.
If the problem continues, call the
telephone company and ask them to
check your telephone line.
Connection Fail
You tried to poll a fax machine that is
not in Polled Waiting mode.
Check the other fax machine's polling
setup.
Cover is Open
The scanner cover is not completely
closed.
Lift the scanner cover and then close it
again.
The ADF cover is not completely
closed.
Open the ADF cover and then close it
again.
The ink cartridge cover is not
completely closed.
Firmly close the ink cartridge cover
until it clicks.
Data Remaining
Print data is left in the machine's
memory.
Press Stop/Exit. The machine will
cancel the job and clear it from the
memory. Try to print again.
Disconnected
The other person or other person's fax
machine stopped the call.
Try to send or receive again.
If calls are stopped repeatedly and you
are using a VoIP (Voice over IP)
system, try changing the Compatibility
to Basic (for VoIP). (See Telephone
line interference / VoIP on page 95.)
Document Jam
The document was not inserted or fed
correctly, or the document scanned
from the ADF was too long.
(See Using the ADF on page 29.)
The print head is too warm.
Allow the machine to cool down.
(U.K. only)
Cannot Detect
Cannot Print
Replace Ink
High Temperature
B
(See Document jam on page 80.)
73
Error Message
Cause
Action
Hub is Unusable.
A Hub or USB Flash memory drive
with Hub has been connected to the
USB direct interface.
A Hub or USB Flash memory drive
with Hub are not supported. Unplug
the device from the USB direct
interface.
Image Too Long.
The proportions of your photo are
irregular so effects could not be
added.
Choose a regularly proportioned
image.
Image Too Small.
The size of your photo is too small to
trim.
Choose a larger image.
Ink Absorber Full
Internal servicing required.
This problem may be caused by the
use of cartridges other than Brother
Original cartridges or the refilling of
empty cartridges with ink from other
sources. If damage is caused to the
print head or other parts of this
machine as a result of using other
brands of ink or ink cartridges, any
repairs required as a result may not be
covered by the warranty.
Call Brother Customer Service / your
Brother dealer.
Ink Absorber NearFull
The ink absorber box or flushing box is
near full.
Call Brother Customer Service / your
Brother dealer.
Ink low
One or more of the ink cartridges are
near the end of their life. If a sending
machine has a colour fax to send, your
machine’s “handshake” will ask that the
fax be sent as monochrome. If the
sending machine has the ability to
convert it, the colour fax will be printed
at your machine as a monochrome fax.
Order a new ink cartridge. You can
continue printing until the LCD shows
Cannot Print. (See Replacing the
ink cartridges on page 66.)
Low Temperature
The print head is too cold.
Allow the machine to warm up.
Media Error
The memory card is either corrupted,
incorrectly formatted, or there is a
problem with the memory card.
Put the card firmly into the slot again to
make sure it is in the correct position.
If the error remains, check the media
drive (slot) of the machine by putting in
another memory card that you know is
working.
Media is Full.
The memory card or USB Flash
memory drive you are using has no
available space or already contains
999 files.
Your machine can only save to your
memory card or USB Flash memory
drive if it contains less than 999 files.
Try deleting unused files to free some
space and try again.
No Caller ID
There is no incoming call history. You
did not receive calls or you have not
subscribed to the Caller ID service
from your telephone company.
If you want to use the Caller ID feature
call your telephone company. (See
Caller ID (U.K. and Ireland only)
on page 41.)
No File
The memory card or USB Flash
memory drive in the media drive does
not contain a .JPG file.
Put the correct memory card or USB
Flash memory drive into the slot again.
74
Troubleshooting
Error Message
Cause
Action
No Ink Cartridge
An ink cartridge is not installed
correctly.
Take out the new ink cartridge and reinstall it slowly until it clicks. (See
Replacing the ink cartridges
on page 66.)
No Paper Fed
The machine is out of paper or paper
is not correctly loaded in the paper
tray.
Do one of the following:
 Refill the paper in the paper tray,
and then press Mono Start or
Colour Start.
 Remove the paper and load it
again and then press Mono Start
or Colour Start. (See Loading
paper and other print media
on page 10.)
The paper is jammed in the machine.
Remove the jammed paper by
following the steps in Printer jam or
paper jam on page 81.
If you see this error often when making
a duplex copy or duplex print, the
paper feed rollers may be stained with
ink. Clean the paper feed rollers. (See
Cleaning the paper feed rollers in
appendix A of the Advanced User's
Guide.)
Paper powder has accumulated on the
surface of the paper pick-up rollers
and the back sides of the paper feed
rollers.
Clean the paper pick-up rollers and
the back sides of the paper feed
rollers. (See Cleaning the paper
pick-up rollers in appendix A of the
Advanced User's Guide.)
The Jam Clear Cover is not closed
correctly.
Check the Jam Clear Cover is closed
evenly at both ends. (See Printer jam
or paper jam on page 81.)
The paper was not inserted in the
Remove the paper and re-insert it in
centre position of the manual feed slot. the centre of the manual feed slot, and
then press Mono Start or
Colour Start. (See Loading paper in
the manual feed slot on page 17.)
No Response/Busy
The number you dialled does not
answer or is busy.
Verify the number and try again.
Not Registered
You tried to access a One Touch or
Speed Dial number that is not
programmed.
Set up the One Touch or Speed Dial
number. (See Storing One Touch Dial
numbers on page 52 and Storing
Speed Dial numbers on page 53.)
75
B
Error Message
Cause
Action
Out of Memory
The machine's memory is full.
Copy operation in progress
Press Stop/Exit and wait until the
other operations in progress finish and
then try again.
Out of Fax Memory
The memory card or USB Flash
memory drive you are using does not
have enough free space to scan the
documents.
Delete unused files from your memory
card or USB Flash memory drive to
make some free space and then try
again.
The fax memory is full.
Do one of the following:
 Clear the data in the memory. To
gain extra memory, you can turn
off Memory Receive. (See Turning
off Memory Receive operations in
chapter 4 of the Advanced User’s
Guide.)
 Print the faxes that are in the
memory. (See Printing a fax from
the memory in chapter 4 of the
Advanced User’s Guide.)
Paper Jam [Front]
Paper is jammed in the machine.
Remove the jammed paper by
following the steps in Paper is jammed
at the front of the machine on page 81.
Make sure the paper length guide is
set to the correct paper size. DO NOT
extend the paper tray when you load
A5 or smaller size paper.
Paper Jam [Front,Rear]
Paper is jammed in the machine.
Remove the jammed paper by
following the steps in Paper is jammed
at the front and back of the machine
on page 83.
Make sure the paper length guide is
set to the correct paper size. DO NOT
extend the paper tray when you load
A5 or smaller size paper.
More than one sheet of paper was
placed in the manual feed slot.
—OR—
Another sheet of paper was placed in
the manual feed slot before the LCD
showed
Put paper in Manual Feed Slot
Then Press Start.
76
Do not put more than one sheet of
paper in the manual feed slot at any
one time. Wait until the LCD shows
Put paper in Manual Feed Slot
Then Press Start before you feed
the next sheet of paper in the manual
feed slot.
Remove the jammed paper by
following the steps in Paper is jammed
at the front and back of the machine
on page 83.
Troubleshooting
Error Message
Cause
Action
Paper Jam [Rear]
Paper is jammed in the machine.
Remove the jammed paper by
following the steps in Paper is jammed
at the back of the machine
on page 82.
Make sure the paper length guide is
set to the correct paper size.
DO NOT extend the paper tray when
you load A5 or smaller size paper.
Unable to CleanXX
Unable to Init.XX
Unable to PrintXX
Unable to ScanXX
Paper powder has accumulated on the
surface of the paper pick-up rollers
and the back sides of the paper feed
rollers.
Clean the paper pick-up rollers and
the back sides of the paper feed
rollers. (See Cleaning the paper
pick-up rollers in appendix A of the
Advanced User's Guide.)
The machine has a mechanical
problem.
Open the scanner cover and remove
any foreign objects and paper scraps
from inside the machine. If the error
message continues, disconnect the
machine from the power for several
minutes and reconnect it.
—OR—
A foreign object such as a paper clip or
ripped paper is in the machine.
(The machine can be turned off for
approximately 24 hours without losing
faxes stored in the memory. See
Transferring your faxes or Fax Journal
report on page 79.)
Unusable Device
Disconnect device from
front connector & turn
machine off & then on
Unusable Device
Please Disconnect
USB Device.
A broken device has been connected
to the USB direct interface.
Unplug the device from the USB direct
interface, then press On/Off to turn
the machine off and then on again.
A USB device or USB Flash memory Unplug the device from the USB direct
interface. Turn the machine off and
drive that is not supported has been
connected to the USB direct interface. then on again.
For more information, visit us at
http://solutions.brother.com/.
Wrong Ink Color
A colour ink cartridge has been
installed in the Black ink cartridge
position.
Check which ink cartridges are not
matched by colour to their ink
cartridge positions and move them to
their correct positions.
77
B
Error Message
Cause
Action
Wrong Paper Size
The Paper Size setting does not
match the size of paper in the tray. Or,
you did not set the paper guides in the
tray to the indicators for the paper size
you are using.
1
Check that the paper size you
choose matches the size of paper
in the tray.
2
Make sure you loaded the paper in
a Portrait position, by setting the
paper guides at the indicators for
your paper size.
3
After you have checked the paper
size and the paper position, press
Mono Start or Colour Start to
continue printing.
1
Press Tray Setting, and make
sure the machine’s Paper Size and
Tray Use settings match the size
of paper in the tray you are using.
(See Paper Size and Type
(MFC-J6710DW) on page 23 and
Tray use in Copy mode
(MFC-J6710DW only)
on page 23.)
2
After you have checked the paper
size and tray use settings, press
a or b to choose
Restart Printing, and press
OK to continue printing.
Wrong Tray Setting
(MFC-J6710DW)
78
The machine’s Paper Size and Tray
Use settings do not match the size of
paper in the tray you are using.
Troubleshooting
Error animations display
B
Error animations display step-by-step
instructions when paper gets jammed. You
can read the steps at your own pace by
pressing c to see the next step and d to go
backward.
Transferring your faxes or Fax
Journal report
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring the Fax Journal
report to another fax machine on page 80.)
d
Press a or b to choose Service.
Press OK.
B
You can transfer the faxes from your
machine's memory to your PC.
We recommend transferring your faxes to
another fax machine or to your PC. (See
Transferring faxes to another fax machine
on page 79 or Transferring faxes to your PC
on page 79.)
Press Menu.
Press Mono Start.
Transferring faxes to your PC
 Unable to ScanXX
b
c
 Enter the fax number to which faxes
will be forwarded.
g
 Unable to PrintXX
Press Stop/Exit to interrupt the error
temporarily.
Do one of the following:
B
 Unable to Init.XX
a
f
Press Stop/Exit.
 Unable to CleanXX
If you have not set up your Station ID, you
cannot enter fax transfer mode. (See Enter
personal information (Station ID) in the Quick
Setup Guide.)
Press a or b to choose Fax Transfer.
Press OK.
 If the LCD shows No Data, there
are no faxes left in the machine's
memory.
If the LCD shows:
Transferring faxes to another fax
machine
e
a
Press Stop/Exit to interrupt the error
temporarily.
b
Make sure you have installed
MFL-Pro Suite on your PC, and then
turn on PC-FAX Receiving on the PC.
(For details see PC-FAX receiving in the
Software User’s Guide.)
c
Make sure you have set PC-Fax
Receive on the machine. (See PC-Fax
Receive (Windows® only) in chapter 4 of
the Advanced User’s Guide.)
If faxes are in the machine’s memory
when you set up PC-Fax Receive, the
LCD will ask if you want to transfer the
faxes to your PC.
d
Do one of the following:
B
B
 To transfer all faxes to your PC,
press 1. You will be asked if you want
a backup print.
 To exit and leave the faxes in the
memory, press 2.
e
Press Stop/Exit.
Press a or b to choose
Data Transfer.
Press OK.
79
Transferring the Fax Journal report to
another fax machine
Document jam
If you have not set up your Station ID, you
cannot enter fax transfer mode. (See Enter
personal information (Station ID) in the Quick
Setup Guide.)
Documents can jam in the ADF unit if they are
not inserted or fed correctly, or if they are too
long. Follow the steps below to clear a
document jam.
a
Press Stop/Exit to interrupt the error
temporarily.
Document is jammed in the top of the
ADF unit
Press Menu.
a
Take out any paper from the ADF that is
not jammed.
b
c
Open the ADF cover.
d
e
Close the ADF cover.
b
c
Press a or b to choose Service.
Press OK.
d
Press a or b to choose
Data Transfer.
Press OK.
e
Press a or b to choose
Report Trans.
Press OK.
f
Enter the fax number to which the Fax
Journal report will be forwarded.
g
Press Mono Start.
Pull the jammed document out to the
right.
Press Stop/Exit.
IMPORTANT
To avoid document jams close the ADF
cover correctly by pushing it gently in the
middle.
80
B
B
B
Troubleshooting
Document is jammed inside the ADF
unit
a
b
c
B
Take out any paper from the ADF that is
not jammed.
c
d
Close the document cover.
Press Stop/Exit.
Printer jam or paper jam
Lift the document cover.
B
Take out the jammed paper depending on
where it is jammed in the machine.
Pull the jammed document out to the
right.
Paper is jammed at the front of the
machine
B
If the LCD shows Paper Jam [Front],
follow these steps:
d
e
Unplug the machine from the electrical
socket.
b
Pull the paper tray (1) completely out of
the machine.
1
Close the document cover.
Press Stop/Exit.
Removing small documents jammed
in the ADF
a
b
a
Lift the document cover.
B
c
Pull out the jammed paper (1).
Insert a piece of stiff paper, such as
cardstock, into the ADF to push any
small paper scraps through.
B
1
81
d
Lift the Jam Clear flap, and remove the
jammed paper.
Paper is jammed at the back of the
machine
If the LCD shows Paper Jam [Rear],
follow these steps:
a
Unplug the machine from the electrical
socket.
Note
Make sure you remove paper from the
manual feed slot, and then close it.
b
e
Open the Jam Clear Cover (1) at the
back of the machine.
Put the paper tray firmly back in the
machine.
1
c
Note
Make sure you pull out the paper support
until it clicks.
f
Re-connect the power cord.
Note
If there is a repeat paper jam, a small
piece of paper may be stuck in the
machine. (See Additional paper jam clear
operations on page 86.)
82
Pull the jammed paper out of the
machine.
B
Troubleshooting
d
b
Close the Jam Clear Cover. Make sure
the cover is closed correctly.
Pull paper tray #1 (1) and then
tray #2 (2) (MFC-J6710DW) completely
out of the machine.
1
e
Re-connect the power cord.
Paper is jammed at the front and back
of the machine
2
B
If the LCD shows
Paper Jam [Front,Rear], follow these
steps:
a
Unplug the machine from the electrical
socket.
c
Pull out the jammed paper (1).
Note
Make sure you remove paper from the
manual feed slot, and then close it.
1
B
1
83
d
e
Lift the flap, and remove the jammed
paper.
(With trays removed, go to step e.)
84
Close the Jam Clear Cover. Make sure
the cover is closed correctly.
h
Put paper tray #1 (1) and then
tray #2 (2) firmly back in the machine.
Open the Jam Clear Cover (1) at the
back of the machine.
1
f
g
Pull the jammed paper out of the
machine.
1
2
Troubleshooting
i
Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover (1) into the open position.
Make sure that there is no jammed
paper left in the corners of the machine.
j
Gently close the scanner cover using
the finger holds on each side.
1
CAUTION
IMPORTANT
• If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
• If the print head is at the right corner as
shown in the illustration, you cannot move
the print head. Re-connect the power
cord. Hold down Stop/Exit until the print
head moves to the middle. Then unplug
the machine from the power source, and
take out the paper.
Be careful not to trap your fingers under the
scanner cover.
Always use the finger holds provided on
each side of the scanner cover when
opening and closing it.
Note
Make sure you pull out the paper support
until it clicks.
k
Re-connect the power cord.
Note
If there is a repeat paper jam, a small
piece of paper may be stuck in the
machine. (See Additional paper jam clear
operations on page 86.)
• If ink gets onto your skin, immediately
wash with soap and plenty of water.
85
B
Additional paper jam clear operations
a
Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover into the open position.
Note
If the print head is at the right corner as
shown in the illustration, hold down
Stop/Exit until the print head moves to the
middle.
b
Unplug the machine from the electrical
socket.
c
Gently close the scanner cover using
the finger holds on each side.
CAUTION
B
Be careful not to trap your fingers under the
scanner cover.
Always use the finger holds provided on
each side of the scanner cover when
opening and closing it.
d
Open the manual feed slot cover.
e
Put only one sheet of A4 or letter sized
thick paper such as glossy paper in a
Landscape position in the manual feed
slot.
Push it into the manual feed slot.
Note
• We recommend you use glossy paper.
• If you don't push the paper deep into the
manual feed slot, the machine will not feed
it when you re-connect the power cord.
86
Troubleshooting
f
Re-connect the power cord.
The paper you placed in the manual
feed slot will be fed through the machine
and ejected.
g
Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover into the open position.
Make sure that a piece of paper is not
still jammed inside the machine.
Gently close the scanner cover using
the finger holds on each side.
B
87
Troubleshooting
B
If you think there is a problem with your machine, check the chart below and follow the
troubleshooting tips.
Most problems can be easily resolved by yourself. If you need additional help, the Brother
Solutions Center offers the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com/.
If you are having difficulty with your machine
Printing
Difficulty
Suggestions
No printout.
Check the interface cable or wireless connection on both the machine and your
computer. (See the Quick Setup Guide.)
Check that the machine is plugged in and that the On/Off key is on.
One or more ink cartridges have reached the end of their life.
(See Replacing the ink cartridges on page 66.)
Check to see if the LCD is showing an error message.
(See Error and Maintenance messages on page 72.)
If the LCD shows Cannot Print and Replace Ink, see Replacing the ink
cartridges on page 66.
Check that the correct printer driver has been installed and chosen.
Make sure that the machine is online. Click Start and then Printers and Faxes.
Brother MFC-XXXXX (where XXXXX is your model name), and make sure that
Use Printer Offline is unchecked.
Poor print quality.
Check the print quality. (See Checking the print quality on page 70.)
Make sure that the Media Type setting in the printer driver or the Paper Type
setting in the machine’s menu matches the type of paper you are using. (See
Printing for Windows® or Printing and Faxing for Macintosh in the Software User’s
Guide and Paper Type on page 22.)
Make sure that your ink cartridges are fresh. The following may cause ink to clog:
 The expiration date written on the cartridge package has passed. (Brother
Original cartridges stay usable for up to two years if kept in their original
packaging.)
 The ink cartridge has been in your machine for over six months.
 The ink cartridge may not have been stored correctly before use.
Make sure you are using Brother Original Innobella™ ink. Brother does not
recommend the use of cartridges other than Brother Original cartridges or the
refilling of used cartridges with ink from other sources.
Try using the recommended types of paper.
(See Acceptable paper and other print media on page 25.)
The recommended environment for your machine is between 20 C to 33 C.
White horizontal lines appear in text
or graphics.
Clean the print head. (See Cleaning the print head on page 69.)
Make sure you are using Brother Original Innobella™ ink.
Try using the recommended types of paper.
(See Acceptable paper and other print media on page 25.)
88
B
Troubleshooting
Printing (continued)
Difficulty
Suggestions
The machine prints blank pages.
Clean the print head. (See Cleaning the print head on page 69.)
Make sure you are using Brother Original Innobella™ ink.
Characters and lines are blurred.
Check the printing alignment. (See Checking the print alignment on page 71.)
Printed text or images are skewed.
Make sure the paper is loaded correctly in the paper tray and the paper side
guides are adjusted correctly. (See Loading paper and other print media
on page 10.)
Make sure the Jam Clear Cover is closed correctly.
Smudge or stain at the top centre of
the printed page.
Make sure the paper is not too thick or curled.
(See Acceptable paper and other print media on page 25.)
Printing appears dirty or ink seems
to run.
Make sure you are using the recommended types of paper. (See Acceptable
paper and other print media on page 25.) Don't handle the paper until the ink is
dry.
Make sure you are using Brother Original Innobella™ ink.
If you are using photo paper, make sure that you have set the correct paper type.
If you are printing a photo from your PC, set the Media Type in the Basic tab of
the printer driver.
Stains appear on the reverse side
or at the bottom of the page.
Make sure the printer platen is not dirty with ink. (See Cleaning the machine’s
printer platen in appendix A of the Advanced User’s Guide.)
Make sure you are using Brother Original Innobella™ ink.
Make sure you are using the paper support flap.
(See Loading paper and other print media on page 10.)
The machine prints dense lines on
the page.
Check Reverse Order in the Basic tab of the printer driver.
The printouts are wrinkled.
(Windows® users)
In the printer driver Advanced tab, click Colour Settings, and uncheck
Bi-Directional Printing.
(Macintosh users)
In the printer driver, choose Print Settings, click Advanced, choose
Other Print Options, and uncheck Bi-Directional Printing.
Make sure you are using Brother Original Innobella™ ink.
Cannot perform “Page Layout”
printing.
Check that the paper size setting in the application and in the printer driver are the
same.
Print speed is too slow.
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver Advanced tab. Also, click Colour Settings, and make sure you uncheck
Colour Enhancement.
Turn the borderless feature off. Borderless printing is slower than normal printing.
(See Printing for Windows® or Printing and Faxing for Macintosh in the Software
User’s Guide.)
Colour Enhancement is not
working correctly.
If the image data is not full colour in your application (such as 256 colour), Colour
Enhancement will not work. Use at least 24 bit colour data with the Colour
Enhancement feature.
Photo paper does not feed
correctly.
When you print on Brother Photo paper, load one extra sheet of the same photo
paper in the paper tray. An extra sheet has been included in the paper package
for this purpose.
Clean the paper pick-up rollers. (See Cleaning the paper pick-up rollers in
appendix A of the Advanced User’s Guide.)
89
B
Printing (continued)
Difficulty
Suggestions
Machine feeds multiple pages.
Make sure the paper is loaded correctly in the paper tray. (See Loading paper and
other print media on page 10.)
Load only one size of paper and one type of paper in the paper tray at any one
time.
There is a paper jam.
Make sure the paper length guide is set to the correct paper size. Do not extend
the paper tray when you load A5 or smaller size paper. (See Printer jam or paper
jam on page 81.)
Paper jam reoccurs.
If there is a repeat paper jam, a small piece of paper may be stuck in the machine.
Make sure paper is not still jammed in the machine. (See Additional paper jam
clear operations on page 86.)
The paper jams when you use
duplex copy or duplex print.
Use one of the jam prevention settings, DX1 or DX2. For copying, see Duplex
(2-sided) copying in chapter 7 of the Advanced User’s Guide;
for printing see Duplex / Booklet for Windows® or Duplex Printing for Macintosh in
the Software User's Guide.
If paper jams often when using duplex copy or duplex print, the paper feed rollers
may be stained with ink. Clean the paper feed rollers. (See Cleaning the paper
feed rollers in appendix A of the Advanced User's Guide.)
Printed pages are not stacked
neatly.
Make sure you are using the paper support flap.
(See Loading paper and other print media on page 10.)
Machine does not print from
Try to reduce the print resolution. (See Printing for Windows® or Printing and
Faxing for Macintosh in the Software User’s Guide.)
Adobe
®
Illustrator®.
Printing Received Faxes
Difficulty
Suggestions
Condensed print and white streaks
across the page or the top and
bottom of sentences are cut off.
You probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
Vertical black lines when receiving.
The sender's scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
Received colour fax prints only in
black and white.
Replace the colour ink cartridges that have reached the end of their life, and then
ask the other person to send the colour fax again.
(See Replacing the ink cartridges on page 66.)
Left and Right margins are cut off or
a single page is printed on two
pages.
Turn on Auto Reduction. (See Printing a reduced incoming fax in chapter 4 of the
Advanced User’s Guide.)
90
Troubleshooting
Telephone Line or Connections
Difficulty
Suggestions
Dialling does not work.
(No dial tone)
Make sure the machine is plugged in and turned on.
Check the line cord connections.
Change the Tone/Pulse setting. (See the Quick Setup Guide.)
Lift the external telephone’s handset and listen for a dial tone. If there is no dial
tone, ask your telephone company to check the line and/or socket.
The machine does not answer
when called.
Make sure the machine is in the correct Receive Mode for your setup.
(See Choose the Receive Mode on page 36.) Check for a dial tone. If possible, call
your machine to hear it answer. If there is still no answer, check the telephone line
cord connection. If there is no ringing when you call your machine, ask your
telephone company to check the line.
Receiving Faxes
Difficulty
Suggestions
Cannot receive a fax.
If you connect your machine to PBX or ISDN, set the menu setting of Telephone
Line Type to your telephone type. (See Setting the Telephone Line Type
on page 42.)
Sending Faxes
Difficulty
Suggestions
Cannot send a fax.
Check all line cord connections.
Make sure that the FAX
key is illuminated.
Ask the other party to check that the receiving machine has paper.
Print the Transmission Verification Report and check for an error. (See Reports in
chapter 6 of the Advanced User’s Guide.)
Transmission Verification Report
says ”RESULT:ERROR”.
There is probably temporary noise or static on the line. Try sending the fax again.
If you send a PC FAX message and get “RESULT:ERROR” on the Transmission
Verification Report, your machine may be out of memory. To gain extra memory,
you can turn off Memory Receive (see Turning off Memory Receive operations in
chapter 4 of the Advanced User’s Guide), print fax messages in memory (see
Printing a fax from the memory in chapter 4 of the Advanced User’s Guide) or
cancel a Delayed Fax or Polling Job. (see Cancelling a fax in progress on page 33
and Checking and cancelling waiting jobs in chapter 3 of the Advanced User’s
Guide.) If the problem continues, ask the telephone company to check your
telephone line.
If you often get transmission errors due to possible interference on the telephone
line, try changing the menu setting of Compatibility to Basic(for VoIP).
(See Telephone line interference / VoIP on page 95.)
If you connect your machine to PBX or ISDN, set the menu setting of Telephone
Line Type to your telephone type. (See Setting the Telephone Line Type
on page 42.)
Poor fax send quality.
Try changing your resolution to Fine or S.Fine. Make a copy to check your
machine's scanner operation. If the copy quality is not good, clean the scanner.
(See Cleaning the scanner glass on page 68.)
Vertical black lines when sending.
Black vertical lines on faxes you send are typically caused by dirt or correction fluid
on the glass strip. Clean the glass strip. (See Cleaning the scanner glass
on page 68.)
91
B
Handling Incoming Calls
Difficulty
Suggestions
The machine “Hears” a voice as a
CNG Tone.
If Fax Detect is set to On, your machine is more sensitive to sounds. It may
mistakenly interpret certain voices or music on the line as a fax machine calling
and respond with fax receiving tones. Deactivate the machine by pressing
Stop/Exit. Try avoiding this problem by turning Fax Detect to Off.
(See Fax Detect on page 39.)
Sending a fax call to the machine.
If you answered on an extension or external telephone, press your Remote
Activation Code (the factory setting is l 5 1). If you answered on an external
telephone, press Start to receive the fax. When your machine answers, hang up.
Custom features on a single line.
If you have Call Waiting, Call Waiting/Caller ID, an alarm system or other custom
feature on a single telephone line with your machine, it may create a problem
sending or receiving faxes.
For example: If you subscribe to Call Waiting or some other custom service and
its signal comes through the line while your machine is sending or receiving a fax,
the signal can temporarily interrupt or disrupt the faxes. Brother's ECM (Error
Correction Mode) feature should help overcome this problem. This condition is
related to the telephone system industry and is common to all devices that send
and receive information on a single, shared line with custom features. If avoiding
a slight interruption is crucial to your business, a separate telephone line with no
custom features is recommended.
Copying Difficulties
Difficulty
Suggestions
Cannot make a copy.
Make sure that the COPY
Poor copy results when using the
ADF.
Try using the scanner glass. (See Using the scanner glass on page 30.)
Vertical black lines or streaks
appear in copies.
Vertical black lines or streaks on copies are typically caused by dirt or correction
fluid on the glass strip. Clean the glass strip. (See Cleaning the scanner glass
on page 68.)
Fit to Page does not work correctly.
Make sure your source document is not skewed.
Reposition the document and try again.
key is illuminated.
Scanning Difficulties
Difficulty
Suggestions
TWAIN or WIA errors appear when
Make sure the Brother TWAIN or WIA driver is chosen as the primary source in
your scanning application. For example, in PaperPort™12SE with OCR, click File,
Scan or Get Photo and click Select to choose the Brother TWAIN/WIA driver.
starting to scan. (Windows®)
TWAIN or ICA errors appear when
starting to scan. (Macintosh)
Make sure the Brother TWAIN driver is chosen as the primary source.
In PageManager, click File, Select Source and choose the Brother TWAIN driver.
Mac OS X 10.6.x users can also scan documents using the ICA Scanner Driver.
See Scanning a document using the ICA driver (Mac OS X 10.6.x) in the Software
User’s Guide.
Poor scanning results when using
the ADF.
Try using the scanner glass. (See Using the scanner glass on page 30.)
92
Troubleshooting
Scanning Difficulties (continued)
Difficulty
Suggestions
OCR does not work.
Try increasing the scanner resolution.
(Macintosh users)
Presto! PageManager must be downloaded and installed before use.
See Accessing Brother Support (Macintosh) on page 3 for further instructions.
Software Difficulties
Difficulty
Suggestions
Cannot install software or print.
(Windows® users only)
Run the Repair MFL-Pro Suite program on the Installation CD-ROM. This
program will repair and reinstall the software.
“Device Busy”
Make sure the machine is not showing an error message on the LCD.
Cannot print images from
FaceFilter Studio.
To use FaceFilter Studio, you must install the FaceFilter Studio application from
the Installation CD-ROM supplied with your machine. To install FaceFilter Studio
see the Quick Setup Guide.
Also, before you start FaceFilter Studio for the first time, you must make sure your
Brother machine is turned on and connected to your computer. This will allow you
to access all the functions of FaceFilter Studio.
PhotoCapture Center™ Difficulties
Difficulty
Suggestions
Removable Disk does not work
correctly.
1
Have you installed the Windows® 2000 update? If not, do the following:
1) Unplug the USB cable.
2) Install the Windows ® 2000 update using one of the following methods.
 Install MFL-Pro Suite from the Installation CD-ROM. (See the Quick
Setup Guide.)
 Download the latest service pack from the Microsoft Web site.
3) Wait about 1 minute after you restart the PC, and then connect the USB
cable.
2
Take out the memory card or USB Flash memory drive and put it back in
again.
3
If you have tried “Eject” from within Windows®, take out the memory card or
USB Flash memory drive before you continue.
4
If an error message appears when you try to eject the memory card or USB
Flash memory drive, it means the card is being accessed. Wait a while and
then try again.
5
If all of the above do not work, turn off your PC and machine, and then turn
them on again. (You will have to unplug the power cord of the machine to turn
it off.)
Cannot access Removable Disk
from Desktop icon.
Make sure that you have correctly inserted the memory card or USB Flash
memory drive.
Part of my photo is missing when
printed.
Make sure that Borderless printing and Cropping are turned off. (See Borderless
printing and Cropping in chapter 8 of the Advanced User’s Guide.)
93
B
Network Difficulties
Difficulty
Suggestions
Cannot print over the network.
Make sure that your machine is powered on and is online and in Ready mode.
Print a Network Configuration list (see Reports in chapter 6 of the Advanced
User’s Guide.) and check the current Network settings printed in this list.
Reconnect the LAN cable to the hub to verify that the cabling and network
connections are good. If possible, try connecting the machine to a different port on
your hub using a different cable. If the connections are good, the machine shows
LAN Active for 2 seconds.
(If you are having Network problems, see the Network User’s Guide for more
information.)
The network scanning feature does
not work.
(Windows® users)
It is necessary to configure third-party Security/Firewall Software to allow Network
scanning. To add port 54925 for Network scanning, enter the information below:
In Name: Enter any description, for example Brother NetScan.
In Port number: Enter 54925.
In Protocol: UDP is selected.
Please refer to the instruction manual that came with your third-party
Security/Firewall Software or contact the software manufacturer.
(Macintosh users)
Re-select your machine in the Device Selector application located in
Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the
model list in ControlCenter2.
The network PC-Fax Receive
feature does not work.
(Windows® users only)
It is necessary to set the third-party Security/Firewall Software to allow PC-FAX
Rx. To add port 54926 for Network PC-FAX Rx, enter the information below:
In Name: Enter any description, for example Brother PC-FAX Rx.
In Port number: Enter 54926.
In Protocol: UDP is selected.
Please refer to the instruction manual that came with your third-party
Security/Firewall Software or contact the software manufacturer.
The Brother software cannot be
installed.
(Windows® users)
Allow network access to the following programs if your security software displays
an alert message during MFL-Pro Suite installation.
(Macintosh users)
If you are using a firewall function of anti-spyware or antivirus security software,
temporarily disable it and then install the Brother software.
Cannot connect to wireless
network.
Investigate the problem using the WLAN Report.
Press Menu key, choose Print Reports and then press OK. Choose
WLAN Report.
For details, see the Network User’s Guide.
Reset the network settings.
Press Menu key, choose Network and then press OK. Choose
Network Reset.
For details, see the Network User’s Guide.
94
Troubleshooting
Dial Tone detection
When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial
as soon as it detects a dial tone. This setting
can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems with dialling you should change
back to the factory No Detection setting.
a
b
c
d
e
Press Menu.
Press a or b to choose
Initial Setup.
Press OK.
B
Telephone line
interference / VoIP
B
If you are having problems sending or
receiving a fax due to possible interference
on the telephone line, you can change the
compatibility setting, which reduces the
modem speed to minimise errors.
a
b
Press Menu.
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose
Compatibility.
d
Press d or c to choose High, Normal or
Basic(for VoIP).
Press a or b to choose Dial Tone.
 Basic(for VoIP) cuts the
modem speed to 9,600 bps and
turns off colour fax receiving and
ECM, except for colour fax sending.
Unless interference is a recurring
problem on your telephone line, you
may prefer to use it only when
needed.
Press d or c to choose Detection or
No Detection.
Press OK.
Press Stop/Exit.
To improve compatibility with most
VoIP services, Brother recommends
changing the compatibility setting to
Basic(for VoIP).
 Normal sets the modem speed at
14,400 bps.
 High increases the modem speed to
33,600 bps. (factory setting)
Press OK.
e
Press Stop/Exit.
Note
VoIP (Voice over IP) is a type of phone
system that uses an internet connection,
rather than a traditional phone line.
95
B
Machine Information
Checking the serial number
3 All Settings
B
You can restore all settings to their factory
defaults.
B
You can see the machine’s serial number on
the LCD.
a
b
Brother strongly recommends you use this
operation when you dispose of the
machine.
Note
Press Menu.
Unplug the interface cable before you
choose Network or All Settings.
Press a or b to choose
Machine Info.
Press OK.
c
Press a or b to choose Serial No.
Press OK.
d
Press Stop/Exit.
Reset functions
How to reset the machine
a
b
B
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
 Speed Dial
(Speed-Dial and Setup Groups)
 Programmed fax jobs in the memory
(Polled Transmit, Delayed Fax and
Delayed Batch Transmission)
 Station ID
(Name and Number)
 Remote Fax Options
(Fax Forwarding)
 Report settings
(Transmission Verification Report,
Quick Dial List and Fax Journal)
 History
(Caller ID history and Outgoing Call)
 Faxes in memory
96
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose Reset.
Press OK.
d
Press a or b to choose the type of reset
you want to use.
Press OK.
Press 1 to confirm.
e
Press 1 to reboot the machine.
2 Speed Dial&Fax
Speed Dial & Fax resets the following
settings:
Press Menu.
B
C
Menu and features
On-screen
programming
C
C
Your machine is designed to be easy to
operate with LCD on-screen programming
using the menu keys. User-friendly
programming helps you take full advantage of
all the menu selections your machine has to
offer.
Since your programming is done on the LCD,
we have created step-by-step on-screen
instructions to help you program your
machine. All you need to do is follow the
instructions as they guide you through the
menu selections and programming options.
C
97
Menu table
C
The menu table will help you understand the menu selections and options that are found in the
machine's programs. The factory settings are shown in Bold with an asterisk.
Menu (
)
Level1
Level2
Level3
Options
Descriptions
Page
Ink Management
Test Print
—
Print Quality
Lets you check the print
quality or alignment.
70
Lets you clean the print
head.
69
See 1 .
Alignment
Cleaning
—
Black
Color
All
General Setup
Ink Volume
—
—
Lets you check the
available ink volume.
Mode Timer
—
Off
Sets the time to return to
Fax mode.
0Sec
30Secs
1Min
2Mins*
5Mins
Tray Setting
Tray#1
(MFC-J6710DW)
Paper Type
(Options)
Sets the type of paper in
the paper tray #1.
Plain Paper*
Inkjet Paper
Brother BP71
Brother BP61
Other Glossy
Transparency
Paper Size
(Options)
A4*
A5
A3
10x15cm
Letter
Legal
Ledger
1
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
98
Sets the size of paper in
the paper tray #1.
23
Menu and features
Level1
Level2
Level3
Options
Descriptions
Page
General Setup
Tray Setting
Tray#2
Paper Type
23
(Continued)
(MFC-J6710DW)
(Option)
Sets the type of paper in
the paper tray #2.
(Continued)
Plain Paper*
Paper Size
(Options)
Sets the size of paper in
the paper tray #2.
A4*
A3
Letter
Legal
Ledger
Tray Use:Copy
Tray#1
Tray#2
Choose the tray that will
be used for Copy mode.
23
Choose the tray that will
be used for Fax mode.
24
Sets the type of paper in
the paper tray.
22
Sets the size of paper in
the paper tray.
22
Auto Select*
Tray Use:Fax
Tray#1
Tray#2
Auto Select*
Paper Setting
Paper Type
(MFC-J6510DW)
Plain Paper*
Inkjet Paper
Brother BP71
Brother BP61
Other Glossy
Transparency
Paper Size
A4*
A5
A3
10x15cm
Letter
Legal
Ledger
1
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
C
99
Level1
Level2
Level3
Options
Descriptions
Page
General Setup
Volume
Ring
Off
Adjusts the ring volume.
8
Adjusts the volume level
of the beeper.
9
Adjusts the volume level
of the speaker.
9
Changes for Daylight
Savings Time
automatically.
See 1 .
You can adjust the
brightness of the LCD
backlight.
9
You can set how long the
LCD backlight stays on for
after the last key press.
See 1 .
Low
(Continued)
Med*
High
Beeper
Off
Low*
Med
High
Speaker
Off
Low
Med*
High
Auto Daylight
—
On*
Off
LCD Settings
Backlight
Light*
Med
Dark
Dim Timer
Off
10Secs
20Secs
30Secs*
Wallpaper
1*
2
You can choose the
wallpaper of the LCD.
3
4
Sleep Mode
—
1Min
2Mins
3Mins
You can choose how long
the machine will remain
idle before it goes into
sleep mode.
5Mins*
10Mins
30Mins
60Mins
A3 - Short Grain
—
On*
Off
Function Lock
1
Set Password
—
Lock OffiOn
—
Setup User
—
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
100
Turn on this setting when
you use A3 short grain
paper.
24
You can restrict selected
machine operation for up
to 10 restricted users and
all other non-authorized
Public users.
See 1 .
Menu and features
Level1
Level2
Level3
Options
Descriptions
Page
Fax
Setup Receive
Ring Delay
0
Sets the number of rings
before the machine
answers in Fax Only or
Fax/Tel mode.
38
Sets the fast double-ring
time in Fax/Tel mode.
38
Receives fax messages
automatically when you
answer a call and hear fax
tone.
39
Allows you to answer all
calls at an extension or
external telephone and
use codes to turn the
machine on or off. You
can personalize these
codes.
47
Cuts the size of incoming
faxes to fit the paper size.
See 1.
1
2*
3
4
5
6
7
8
(Example for the
U.K.)
F/T Ring Time
20Secs
30Secs*
40Secs
70Secs
Fax Detect
On*
Off
Remote Codes
On*
(l51, #51)
Off
Auto Reduction
On*
Off
Memory Receive
Off*
Fax Forward
Fax Storage
PC Fax Receive
You can set the machine
to either forward fax
messages, store incoming
faxes in the memory (so
you can retrieve them
while you are away from
your machine), or send
faxes to your PC.
C
If you choose Fax Forward
or PC-Fax Receive, you
can turn on the safety
feature Backup Print.
1
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
101
Level1
Level2
Level3
Options
Descriptions
Page
Fax
Report Setting
XMIT Report
On
Initial setup for
Transmission Verification
Report and Fax Journal
Report.
34
(Continued)
On+Image
Off*
Off+Image
Off2
Off2+Image
Journal Period
See 1 .
Off
Every 50 Faxes*
Every 6 Hours
Every 12 Hours
Every 24 Hours
Every 2 Days
Every 7 Days
Print Document
—
—
Prints incoming faxes
stored in the memory.
Remote Access
—
---
Set your own code for
Remote Retrieval.
Remaining Jobs
—
—
Check which jobs are in
the memory and lets you
cancel chosen jobs.
Miscellaneous
BT Call Sign On
On
Uses with BT Call Sign.
(U.K. Only)
Off*
Caller ID
On*
(U.K. and
Ireland only)
Off
1
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
102
View or print a list of the
last 30 Caller IDs stored in
the memory.
41
Menu and features
Network menu
Level1
Level2
Level3
Level4
Options
Descriptions
Network
Wired LAN
TCP/IP
BOOT Method
Auto*
Chooses the
BOOT method
that best suits
your needs.
Static
RARP
BOOTP
DHCP
IP Address
[000-255].
[000-255].
Enter the IP
address.
[000-255].
[000-255]
Subnet Mask
[000-255].
[000-255].
Enter the Subnet
mask.
[000-255].
[000-255]
Gateway
[000-255].
[000-255].
Enter the
Gateway
address.
[000-255].
[000-255]
Node Name
BRNXXXXXXXXXXXX
Enter the Node
name.
WINS Config
Auto*
Chooses the
WINS
configuration
mode.
Static
WINS Server
(Primary)
000.000.000.000
(Secondary)
000.000.000.000
DNS Server
(Primary)
000.000.000.000
(Secondary)
000.000.000.000
APIPA
On*
Off
IPv6
On
Off*
Specifies the IP
address of the
primary or
secondary
server.
Specifies the IP
address of the
primary or
secondary
server.
Automatically
allocates the IP
address from the
link-local address
range.
Enable or disable
the IPv6 protocol.
See Network User’s Guide.
The factory settings are shown in Bold with an asterisk.
103
C
Level1
Level2
Level3
Level4
Options
Descriptions
Network
Wired LAN
Ethernet
—
Auto*
(Continued)
(Continued)
Chooses the
Ethernet link
mode.
100B-FD
100B-HD
10B-FD
10B-HD
WLAN
MAC Address
—
—
You can see your
machine’s MAC
address from the
control panel.
TCP/IP
BOOT Method
Auto*
Chooses the
BOOT method
that best suits
your needs.
Static
RARP
BOOTP
DHCP
IP Address
[000-255].
[000-255].
Enter the IP
address.
[000-255].
[000-255]
Subnet Mask
[000-255].
[000-255].
Enter the Subnet
mask.
[000-255].
[000-255]
Gateway
[000-255].
[000-255].
Enter the
Gateway
address.
[000-255].
[000-255]
Node Name
BRWXXXXXXXXXXXX
Enter the Node
name.
WINS Config
Auto*
Chooses the
WINS
configuration
mode.
Static
WINS Server
(Primary)
000.000.000.000
(Secondary)
000.000.000.000
DNS Server
(Primary)
000.000.000.000
(Secondary)
000.000.000.000
See Network User’s Guide.
The factory settings are shown in Bold with an asterisk.
104
Specifies the IP
address of the
primary or
secondary
server.
Specifies the IP
address of the
primary or
secondary
server.
Menu and features
Level1
Level2
Level3
Level4
Options
Descriptions
Network
WLAN
TCP/IP
APIPA
On*
(Continued)
(Continued)
(Continued)
Automatically
allocates the IP
address from the
link-local address
range.
Off
IPv6
On
Off*
Enable or disable
IPv6 protocol for
a wireless LAN.
Setup Wizard
—
—
You can
manually
configure your
print server for a
wireless network.
WPS/AOSS
—
—
You can easily
configure your
wireless network
settings using the
one-button push
method.
WPS w/PIN Code
—
—
You can easily
configure your
wireless network
settings using
WPS with a PIN
code.
WLAN Status
Status
—
You can see the
current wireless
network status.
Signal
—
You can see the
current wireless
network signal
strength.
SSID
—
You can see the
current SSID.
Comm. Mode
—
You can see the
current
Communication
Mode.
—
—
You can see your
machine’s MAC
address from the
control panel.
MAC Address
See Network User’s Guide.
The factory settings are shown in Bold with an asterisk.
105
C
Level1
Level2
Level3
Level4
Options
Descriptions
Network
E-mail/IFAX
Mail Address
—
—
(Continued)
(Available after
IFAX is
downloaded)
Enter the mail
address. (Up to
60 characters)
Setup Server
SMTP Server
Name
(Up to 30
characters)
Enter the SMTP
server address.
IP Address
[000-255].
[000-255].
[000-255].
[000-255]
SMTP Port
[00001-65535]
Enter the SMTP
port number.
Auth. for SMTP
None*
Selects the
Security method
for E-mail
notification.
SMTP-AUTH
POP bef.SMTP
POP3 Server
Name
(Up to 30
characters)
Enter the POP3
server address.
IP Address
[000-255].
[000-255].
[000-255].
[000-255]
POP3 Port
[00001-65535]
Enter the POP3
port number.
Mailbox Name
—
Enter the mail
box name. (Up to
20 characters)
Mailbox Pwd
—
Enter the
password to login
to the POP3
server. (Up to
20 characters)
APOP
On
Enables or
disables APOP.
Off*
See Network User’s Guide.
The factory settings are shown in Bold with an asterisk.
106
Menu and features
Level1
Level2
Level3
Level4
Options
Descriptions
Network
E-mail/IFAX
Setup Mail RX
Auto Polling
On*
(Continued)
(Available after
IFAX is
downloaded)
Automatically
checks the POP3
server for new
messages.
Off
(Continued)
Poll Frequency
10Min(s)*
Sets the interval
for checking for
new messages
on the POP3
server.
Header
All
Selects the
contents of the
mail header to be
printed.
Subject+From+To
None*
Del Error Mail
On*
Off
Notification
On
MDN
Deletes error
mails
automatically.
Receives
notification
messages.
Off*
Setup Mail TX
Sender Subject
—
Displays the
subject that is
attached to the
Internet Fax data.
Size Limit
On
Limits the size of
E-mail
documents.
Off*
Notification
On
Off*
Setup Relay
Rly Broadcast
On
Off*
Sends
notification
messages.
Relays a
document to
another fax
machine over the
internet.
Relay Domain
RelayXX:
Registers the
Domain name.
Relay Report
On
Prints the Relay
Broadcast
Report.
Off*
Time Zone
—
UTCXXX:XX
—
Sets the time
zone for your
country.
Network I/F
—
Wired LAN*
—
You can choose
the network
connection type.
—
Restore all
network settings
to factory default.
WLAN
Network Reset
—
—
C
See Network User’s Guide.
The factory settings are shown in Bold with an asterisk.
107
Menu (
) (continued)
Level1
Level2
Level3
Options
Descriptions
Page
Print Reports
XMIT Verify
—
—
See 1 .
Help List
—
—
Prints these lists and
reports.
Quick Dial
—
Alphabetic Order
Numeric Order
Fax Journal
—
—
User Settings
—
—
Network Config
—
—
WLAN Report
—
—
Caller ID hist.
—
—
Machine Info.
Serial No.
—
—
Lets you check the serial
number of your machine.
96
Initial Setup
Receive Mode
—
Fax Only*
Choose the receive mode
that best suits your needs.
36
See 2 .
Fax/Tel
External TAD
Manual
Date&Time
—
—
Puts the date and time on
the LCD and in headings
of faxes you send.
Station ID
—
Fax:
Set your name and fax
number to appear on each
page you fax.
Name:
Tone/Pulse
—
Tone*
Choose the dialling mode.
Pulse
Dial Tone
—
Detection
No Detection*
Phone Line Set
—
Normal*
PBX
ISDN
1
See Advanced User’s Guide.
2
See Quick Setup Guide.
The factory settings are shown in Bold with an asterisk.
108
Turns Dial Tone Detection
on or off.
95
Choose the telephone line
type.
42
Menu and features
Level1
Level2
Level3
Options
Descriptions
Page
Initial Setup
Compatibility
—
High*
Adjusts the modem speed
to help resolve
transmission problems.
95
96
(Continued)
Normal
Basic(for VoIP)
Reset
Network
—
Resets the print server
back to its factory default
settings, such as the
password and IP address
information.
Speed Dial&Fax
—
Deletes all stored
Speed Dial numbers and
faxes, restores the Station
ID, Quick Dial List,
Transmission Verification
Report and Fax Journal
back to the factory default
settings.
All Settings
—
Resets all the machine’s
settings back to the
settings that were set at
the factory.
1
See Advanced User’s Guide.
2
See Quick Setup Guide.
The factory settings are shown in Bold with an asterisk.
C
109
FAX (
)
Level1
Level2
Level3
Options
Descriptions
Page
Fax Resolution
—
—
Standard*
Sets the resolution for
outgoing faxes.
See 1 .
Fine
S.Fine
Photo
Contrast
—
—
Auto*
Light
Changes the lightness or
darkness of faxes you send.
Dark
Glass ScanSize
—
—
A4*
A3
Sets the glass scan size for
faxes.
33
Letter
Legal
Ledger
Internet Fax
—
—
—
You can send and receive
fax documents using the
Internet.
See 2 .
Search
—
Alphabetic
Order
You can dial by pressing only
a few keys (and Start).
50
(Available after
IFAX is
downloaded)
Phone Book
Numeric Order
Outgoing Call
Set One Touch
—
—
Stores One Touch Dial
numbers, so you can dial by
pressing only a few keys
(and Start).
52
Set Speed Dial
—
—
Stores Speed Dial numbers,
so you can dial by pressing
only a few keys (and Start).
53
Setup Groups
—
—
You can set up Group
numbers for Broadcasting.
See 1 .
Send a fax
—
—
You can choose a number
from the Outgoing Call
history and then make a
telephone call to it, send a
fax to it, add it to Speed Dial,
or delete it.
51
—
—
You can choose a number
from the Caller ID history and
then send a fax to it, add it to
Speed Dial, or delete it.
51
Add To Phone
Book
Delete
Caller ID hist.
Send a fax
(U.K. and Ireland
only)
Add To Phone
Book
Delete
1
See Advanced User’s Guide.
2
See Network User’s Guide.
The factory settings are shown in Bold with an asterisk.
110
Menu and features
Level1
Level2
Level3
Options
Descriptions
Page
Broadcasting
Dial Type
—
Fax/Tel*
You can send the same fax
message to more than one
fax number.
See 1.
(Available after
IFAX is
downloaded)
Add Number
E-Address
—
—
—
On
Phone Book
Complete
Delayed Fax
—
Off*
Batch TX
—
—
On
Off*
Real Time TX
—
—
On
Off*
Polled TX
—
—
Standard
Secure
Sets the time of day in
24-hour format that the
delayed faxes will be sent.
Combines delayed faxes to
the same fax number at the
same time of day into one
transmission.
You can send a fax without
using the memory.
Sets up the document on
your machine to be retrieved
by another fax machine.
Off*
Polling RX
—
—
Standard
Secure
Sets up your machine to poll
another fax machine.
Timer
Off*
Overseas Mode
—
—
On
Off*
Set New Default
—
—
Fax Resolution
Contrast
If you are having difficulty
sending faxes overseas, set
this to On.
You can save your fax
settings.
Glass ScanSize
Real Time TX
Factory Reset
—
—
1
See Advanced User’s Guide.
2
See Network User’s Guide.
—
You can restore all settings
to the factory settings.
C
The factory settings are shown in Bold with an asterisk.
111
SCAN (
)
Level1
Option1
Option2
Option3
Descriptions
Page
Scan to File
—
—
—
You can scan a monochrome
or a colour document into
your computer.
See 1.
Scan to Media
(when a memory
card or USB
Flash memory
drive is inserted)
Quality
—
Color 100
You can choose the scan
resolution and file format for
your document.
61
Sets the glass scan size for
scans.
See 2.
Color 200*
Color 300
Color 600
B/W 100
B/W 200
B/W 300
File Type
—
(If you choose
colour option in
Quality setting)
PDF*
JPEG
(If you choose
Mono option in
Quality setting)
TIFF
PDF*
Glass ScanSize
—
A4*
A3
Letter
Legal
Ledger
File Name
—
—
You can rename the file.
61
Auto Crop
—
On
Scan multiple documents
placed on the scanner glass to
a memory card or USB Flash
memory drive one at a time.
See 2.
Off*
Set New Default
—
Quality
File Type
You can save your scan
settings.
Glass ScanSize
Auto Crop
Factory Reset
—
—
1
See Software User’s Guide.
2
See Advanced User’s Guide.
3
(Macintosh users)
Presto! PageManager must be downloaded and installed before use. See Accessing Brother
Support (Macintosh) on page 3 for further instructions.
The factory settings are shown in Bold with an asterisk.
112
You can restore all settings to
the factory settings.
Menu and features
Level1
Option1
Option2
Option3
Descriptions
Page
Scan to Network
(Profile Name)
—
—
You can send a scanned data
to a CIFS server on your local
network or on the internet.
See 1 .
Scan to FTP
(Profile Name)
—
—
You can send a scanned data
via FTP.
Scan to E-mail
PC
—
—
You can scan a monochrome
or a colour document into
your E-mail application.
E-mail Server
Manual
—
(Available after
IFAX is
downloaded)
You can enter an E-mail
address using the dial pad.
Phone Book
Alphabetic
Order
You can search for an E-mail
address that you have stored
in the machine.
Numeric Order
Quality
Color 100
Color 200*
Chooses the file format to
send the scanned data via
E-mail server.
Color 300
Color 600
B/W 100
B/W 200
B/W 300
File Type
(If you choose
colour option in
Quality setting)
PDF*
JPEG
(If you choose
Mono option in
Quality setting)
TIFF
PDF*
Glass ScanSize
A4*
A3
Sets the glass scan size for
scans.
Letter
Legal
Ledger
C
1
See Software User’s Guide.
2
See Advanced User’s Guide.
3
(Macintosh users)
Presto! PageManager must be downloaded and installed before use. See Accessing Brother
Support (Macintosh) on page 3 for further instructions.
The factory settings are shown in Bold with an asterisk.
113
Level1
Option1
Option2
Option3
Descriptions
Page
Scan to E-mail
E-mail Server
Set New Default
Quality
See 1.
(Continued)
(Available after
IFAX is
downloaded)
You can save your scan
settings.
File Type
Glass ScanSize
(Continued)
Factory Reset
—
You can restore all settings to
the factory settings.
Scan to OCR 3
—
—
—
You can have your text
document converted to an
editable text file.
Scan to Image
—
—
—
You can scan a colour picture
into your graphics
application.
1
See Software User’s Guide.
2
See Advanced User’s Guide.
3
(Macintosh users)
Presto! PageManager must be downloaded and installed before use. See Accessing Brother
Support (Macintosh) on page 3 for further instructions.
The factory settings are shown in Bold with an asterisk.
114
Menu and features
COPY (
)
Level1
Level2
Level3
Options
Descriptions
Page
Quality
—
—
Fast
Choose the Copy resolution
for the next copy.
See 1.
Choose the paper type that
matches the paper in the
tray.
56
Choose the paper size that
matches the paper in the
tray.
56
Choose the tray that will be
used for Copy mode.
56
See 1.
Normal*
Best
Paper Type
—
—
Plain Paper*
Inkjet Paper
Brother BP71
Brother BP61
Other Glossy
Transparency
Paper Size
—
—
A4*
A5 (tray #1 only)
A3
10x15cm
(tray #1 only)
Letter
Legal
Ledger
Tray Select
—
—
(MFC-J6710DW)
Tray#1
Tray#2
Auto Select*
Enlarge/Reduce
100%*
—
—
—
Enlarge
—
198% 10x15cmiA4
You can choose the
enlargement ratio for the
next copy.
186% 10x15cmiLTR
141% A4iA3, A5iA4
Reduce
—
97% LTRiA4
93% A4iLTR
You can choose the
reduction ratio for the next
copy.
83% LGLiA4
69% A3iA4, A4iA5
47% A4i10x15cm
Fit to Page
—
—
Your machine will adjust
the size automatically to the
paper size you set.
Custom(25-400%)
—
—
You can choose the
enlargement or reduction
ratio for your type of
document.
1
C
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
115
Level1
Level2
Level3
Density
—
—
Stack/Sort
—
—
Options
Stack*
Sort
Page Layout
—
2 in 1 (L)
If you choose A3
or Ledger:
(When 2 in 1 is
chosen)
2 in 1 (ID)
LGRx2 i LGRx1
4 in 1 (P)
LTRx2 i LGRx1
4 in 1 (L)
A3x2 i A3x1
1 to 2
A4x2 i A3x1
Poster(2 x 1)
(When poster 2x2
is chosen)
Off(1 in 1)*
2 in 1 (P)
Poster(2 x 2)
Poster(3 x 3)
Descriptions
Page
Adjusts the density of
copies.
See 1 .
You can choose to stack or
sort multiple copies.
You can make N in 1 or
Poster copies.
LGRx1 i LGRx4
LTRx1 i LGRx4
A3x1 i A3x4
A4x1 i A3x4
Skew Adjustment
—
—
Auto*
Off
Duplex Copy
On
Flip Type
LongEdge Flip(P)*
LongEdge Flip(L)
ShortEdge Flip(P)
ShortEdge Flip(L)
Advanced
Normal*
DX1
DX2
Off*
1
A3/LGR DX
Setting
Fit to Page*
—
—
Keep Scale
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
116
If your scanned copy is
skewed, your machine can
correct the data
automatically.
Enables or disables duplex
printing. You can also
choose long edge or short
edge duplex printing.
Menu and features
Level1
Level2
Level3
Options
Descriptions
Page
Advanced
Settings
—
—
Off*
You can choose various
settings for copy such as
Book Copy and
Watermark Copy.
See 1.
Ink Save Mode
Thin Paper Copy
Book Copy
Watermark Copy
Set New Default
—
—
Quality
Tray Select
(MFC-J6710DW)
You can save your copy
settings.
Enlarge/Reduce
Density
Page Layout
Skew Adjustment
Ink Save Mode
Thin Paper Copy
Duplex Copy
Factory Reset
—
1
—
—
You can restore all settings
to the factory settings.
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
C
117
Watermark Copy Settings
Option1
Option2
Option3
Option4
Descriptions
Page
Template
Text
—
CONFIDENTIAL*
Uses a template to place
text into your document as
a Watermark.
See 1.
DRAFT
COPY
Position
A
B
C
D
E*
F
G
H
I
Pattern
Size
Small
Medium*
Large
Angle
-90
-45*
0
45
90
Transparency
-2
-1
0*
+1
+2
Colour
Red
Orange
Yellow
Blue
Green
Purple
Black*
Apply
1
—
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
118
Menu and features
Option1
Option2
Option3
Option4
Descriptions
Page
Media
(Select image
from media)
Position
A
Places a logo or text into
your document as a
Watermark using an image
from removable media.
See 1.
B
C
D
E*
F
G
H
I
Pattern
Size
Small
Medium*
Large
Angle
-90
-45*
0
45
90
Transparency
-2
-1
0*
+1
+2
Scan
(Set watermark
document and
press Start.)
Apply
—
Transparency
-2
-1
0*
You can place a logo or text
into your document as a
Watermark by scanning a
paper document.
+1
+2
Apply
1
—
See Advanced User’s Guide.
C
The factory settings are shown in Bold with an asterisk.
119
PHOTO CAPTURE (
)
Level1
Level2
Level3
Options
Descriptions
Page
View Photo(s)
—
—
See the print
settings in the
following table.
You can preview your
photos on the LCD.
60
Print Index
Layout Format
—
6 Images/Line*
You can print a thumbnail
page.
See 1 .
5 Images/Line
Paper Type
Plain Paper*
Inkjet Paper
Brother BP71
Brother BP61
Other Glossy
Paper Size
A4*
Letter
Print Photos
—
—
Enhance Photos
Auto Correct
—
See the print
settings in the
following table.
Enhance Skin
You can print an individual
image.
You can adjust your photos
with these settings.
Enhance Scenery
Remove Red-Eye
Night Scene
Fill Light
Whiteboard
Monochrome
Sepia
Search by Date
—
—
You can search your
photos in date order.
Print All
Photos
—
—
You can print all photos in
your memory card or USB
Flash memory drive.
Slide Show
—
—
The machine starts a Slide
Show of your photos.
Trimming
—
—
You can trim your photo
and print a part of the
image.
1
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
120
Menu and features
Print Settings
Option1
Option2
Option3
Option4
Descriptions
Page
Print Quality
Normal
—
—
Choose the print quality.
See 1.
(Not available for
DPOF printing.)
Photo*
Paper Type
Plain Paper
—
—
Choose the paper type.
(When A4 or
Letter is chosen)
—
Choose the paper and print
size.
—
—
Adjusts the brightness.
—
—
Adjusts the contrast.
Inkjet Paper
Brother BP71
Brother BP61
Other Glossy*
Paper Size
10x15cm*
13x18cm
8 x 10cm
A4
9 x 13cm
A3
Letter
Ledger
10 x 15cm
13 x 18cm
15 x 20cm
Max. Size*
Brightness
(Not available
when
Enhance Photos
is chosen.)
Contrast
(Not available
when
Enhance Photos
is chosen.)
1
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
C
121
Option1
Option2
Option3
Color Enhance
On
White Balance
(Not available
when
Enhance Photos
is chosen.)
Off*
Option4
+2
+1
Descriptions
Page
Adjusts the hue of the white
areas.
See 1.
-1
-2
Sharpness
+2
+1
Enhances the detail of the
image.
-1
-2
Color Density
+2
+1
Adjusts the total amount of
colour in the image.
-1
-2
Cropping
On*
—
—
Crops the image around the
margin to fit the paper size
or print size. Turn this
feature off if you want to
print whole images or
prevent unwanted
cropping.
—
—
Expands the printable area
to fit the edges of the paper.
—
—
Prints the date on your
photo.
—
—
You can save your print
settings.
—
—
You can restore all the
settings to factory settings.
Off
Borderless
On*
Off
Date Print
On
(Not available for
DPOF printing.)
Off*
Set New Default
Print Quality
Paper Type
Paper Size
Brightness
Contrast
Color Enhance
Cropping
Borderless
Date Print
Factory Reset
—
1
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
122
Menu and features
Phone Book (
)
Level1
Level2
Level3
Options
Descriptions
Page
Search
—
—
Alphabetic
Order
You can search for names
you have stored in the
Speed Dial memory.
50
Numeric Order
Set One Touch
—
—
—
You can store your most
frequently called numbers
on the One Touch keys.
52
Set Speed Dial
—
—
—
Stores Speed Dial
numbers, so you can dial by
pressing only a few keys
(and Start).
53
Setup Groups
—
—
—
Sets up Group numbers for
Broadcasting.
See 1.
1
See Advanced User’s Guide.
The factory settings are shown in Bold with an asterisk.
Redial/Pause (
)
Level1
Level2
Level3
Options
Descriptions
Page
Outgoing Call
Send a fax
—
—
You can choose a number
from the Outgoing Call
history and then make a
telephone call to it, send a
fax to it, add it to
Speed Dial, or delete it.
51
—
—
You can choose a number
from the Caller ID history
and then send a fax to it,
add it to Speed Dial, or
delete it.
51
Add To Phone
Book
Delete
Caller ID hist.
Send a fax
(U.K. and Ireland
only)
Add To Phone
Book
Delete
The factory settings are shown in Bold with an asterisk.
Fax Preview (
)
C
Level1
Level2
Level3
Options
Descriptions
Page
Fax Preview
—
—
ON
You can view faxes you
send and receive on the
LCD screen.
39
OFF*
The factory settings are shown in Bold with an asterisk.
123
Entering Text
C
When you are setting certain menu selections, such as the Station ID, you may need to enter text
into the machine. Most dial pad keys have three or four letters printed on keys. The keys for 0, #
and l do not have printed letters because they are used for special characters.
Press the appropriate dial pad key the number of times shown in this reference table to access
the character you want.
Press
Key
one
time
two
times
three
times
four
times
five
times
2
A
B
C
2
A
3
D
E
F
3
D
4
G
H
I
4
G
5
J
K
L
5
J
6
M
N
O
6
M
7
P
Q
R
S
7
8
T
U
V
8
T
9
W
X
Y
Z
9
Inserting spaces
C
To enter a space in a fax number, press c once between numbers. To enter a space in a name,
press c twice between characters.
Making corrections
C
If you entered an incorrect character and want to change it, press d or c to move the cursor under
the incorrect character. Then press Clear. Re-enter the correct character. You can also back up
and insert characters.
Repeating letters
C
If you need to enter a letter that is on the same key as the letter before, press c to move the cursor
to the right before you press the key again.
Special characters and symbols
Press l, # or 0, repeatedly until you see the special character or symbol you want.
Press l
for
(space) ! " # $ % & ' ( )
Press #
for
:;<=>?@[]^_
Press 0
for
ÄËÖÜÀÇÈÉ0
124
+,-./m
C
D
Specifications
D
General
D
Note
This chapter provides a summary of the machines’ specifications. For additional specifications
visit http://www.brother.com/ for details.
Printer Type
Inkjet
Print Method
Mono:
Piezo with 94  1 nozzle
Colour:
Piezo with 94  3 nozzles
Memory Capacity
64 MB
LCD (Liquid Crystal
Display)
Wide 3.3 in. (82.8 mm) TFT Colour LCD
Power Source
AC 220 to 240V 50/60Hz
Power Consumption 1
Copying Mode:
Approx. 26 W 2
Ready Mode:
Approx. 7.5 W
Sleep Mode:
Approx. 4 W
Off:
Approx. 0.3 W
1
Measured when the machine is connected to the USB interface.
2
When using ADF, single-side printing, resolution: standard / document: ISO/IEC 24712 printed pattern.
D
125
Dimension
(MFC-J6510DW)
257 mm
540 mm
489 mm
590 mm
669 mm
(MFC-J6710DW)
331 mm
Weight
540 mm
489 mm
590 mm
669 mm
(MFC-J6510DW)
15.8 kg
(MFC-J6710DW)
18.2 kg
Noise
Operating:
LPAm = 50 dB or less 1
Noise per ISO9296
Copying:
(MFC-J6510DW)
LWAd = 6.38 B(A) 2 (Mono)
LWAd = 6.01 B(A) (Colour)
(MFC-J6710DW)
LWAd = 6.31 B(A) 2 (Mono)
LWAd = 6.22 B(A) (Colour)
Ready:
(MFC-J6510DW)
LWAd = 3.05 B(A) (Mono/Colour)
(MFC-J6710DW)
LWAd = 3.07 B(A) (Mono/Colour)
Temperature
Humidity
Operating:
10 to 35 C
Best Print Quality:
20 to 33 C
Operating:
20 to 80% (without condensation)
Best Print Quality:
20 to 80% (without condensation)
ADF (automatic
document feeder)
Up to 35 pages
Document Size
ADF Width: 148 mm to 297 mm
Paper: 80 g/m2 A4 or Letter size
ADF Length: 148 mm to 431.8 mm
Scanner Glass Width: Max. 297 mm
Scanner Glass Length: Max. 431.8 mm
1
Noise depends on printing conditions.
2
Office equipment with LWAd>6.30 B(A) is not suitable for use in room where people do primarily intellectual work. Such
equipment should be placed in separate rooms because of the noise emission.
126
Specifications
Print media
Paper Input
D
Paper Tray #1
 Paper type:
Plain paper, inkjet paper (coated paper),
glossy paper 1 and transparency 1 2
 Paper size:
A4, Ledger, A3, Legal, Executive, Letter, A5, A6, JIS B4, JIS B5,
Envelopes (commercial No.10, DL, C5, Monarch, Y4),
Photo 10  15 cm, Photo L 89  127 mm, Photo 2L 13  18 cm,
Index Card and PostCard 3
Width: 89 mm - 297 mm
Length: 127 mm - 431.8 mm
For more details, see Paper weight and thickness on page 28.
 Maximum paper tray capacity:
Approx. 250 sheets of 80 g/m2 plain paper
Paper Tray #2 (MFC-J6710DW)
 Paper type:
Plain paper
 Paper size:
A4, Ledger, A3, Legal, Executive, Letter, JIS B4, JIS B5
Width: 182 mm - 297 mm
Length: 257 mm - 431.8 mm
For more details, see Paper weight and thickness on page 28.
 Maximum paper tray capacity:
Approx. 250 sheets of 80 g/m2 plain paper
1
For glossy paper or transparencies, remove printed pages from the output paper tray immediately after they exit the
machine to avoid smudging.
2
Use only transparencies recommended for inkjet printing.
3
See Paper type and size for each operation on page 27.
D
127
Paper Input
(Continued)
Manual Feed Slot
 Paper type:
Plain paper, inkjet paper (coated paper), glossy paper 1,
transparency 1 2, envelopes and Labels
 Paper size:
A4, Ledger, A3, Legal, Executive, Letter, A5, A6, JIS B4, JIS B5,
Envelopes (commercial No.10, DL, C5, Monarch, Y4),
Photo 10  15 cm, Photo L 89  127 mm, Photo 2L 13  18 cm,
Index Card and PostCard 3
Width: 89 mm - 297 mm
Length: 127 mm - 431.8 mm
For more details, see Paper weight and thickness on page 28.
 Maximum paper tray capacity:
1 sheet of special print media
Paper Output
Up to 50 sheets of A4 plain paper (face up print delivery to the output
paper tray) 1
1
For glossy paper or transparencies, remove printed pages from the output paper tray immediately after they exit the
machine to avoid smudging.
2
Use only transparencies recommended for inkjet printing.
3
See Paper type and size for each operation on page 27.
128
Specifications
Fax
D
Compatibility
ITU-T Super Group 3
Modem Speed
Automatic Fallback
33,600 bps
Scanning Width
288 mm (A3)
Printing Width
291 mm (A3)
Greyscale
Levels: 64 (B&W) / 256 (Colour)
Resolution
Standard
203  98 dpi (Mono)
203  196 dpi (Colour)
Fine
203  196 dpi (Mono/Colour)
Superfine
203  392 dpi (Mono)
Photo
203  196 dpi (Mono)
1
One Touch Dial
16 (8  2)
Speed Dial
100 stations  2 numbers
Groups
Up to 6
Broadcasting
266 (200 Speed Dial/16 One Touch Dial/ 50 Manual Dial)
Automatic Redial
3 times at 5 minute intervals
Memory Transmission
Up to 400 1 pages
Out of Paper Reception
Up to 400 1 pages
“Pages” refers to the “ITU-T Test Chart #1” (a typical business letter, Standard resolution, MMR code). Specifications
and printed materials are subject to change without prior notice.
D
129
Copy
D
Colour/Monochrome
Yes/Yes
Copy Width
Max. 291 mm
Multiple Copies
Stacks/Sorts up to 99 pages
Enlarge/Reduce
25% to 400% (in increments of 1%)
Resolution
Prints up to 1200  1200 dpi
Duplex
 Paper type:
Plain paper
 Paper size:
A4, Ledger 1, A3 1, Legal, Letter, A5
1
Minimum top and bottom margins of 22 mm
130
Specifications
PhotoCapture Center™
D
Compatible Media 1
Memory Stick™ (16 MB - 128 MB)
Memory Stick PRO™ (256 MB - 32 GB)
Memory Stick Duo™ (16 MB - 128 MB)
Memory Stick PRO Duo™ (256 MB - 32 GB)
Memory Stick Micro™ (M2™) with Adapter
MultiMedia Card (32 MB - 2 GB)
MultiMedia Card plus (128 MB - 4 GB)
SD (16 MB to 2 GB)
miniSD with Adapter
microSD with Adapter
SDHC (4 GB to 32 GB)
miniSDHC with Adapter
microSDHC with Adapter
USB Flash memory drive 2
Resolution
Up to 1200  2400 dpi
File Extension
(Media Format)
DPOF (ver. 1.0, ver. 1.1), Exif DCF (up to ver. 2.1)
(Image Format)
Photo Print: JPEG 3, AVI 4, MOV 4
Scan to Media: JPEG, PDF (Colour)
TIFF, PDF (Monochrome)
Number of Files
Up to 999 files
(The folder inside memory cards or USB Flash memory drive is
also counted.)
Folder
File must be stored in the 4th folder level of the memory card or
USB Flash memory drive.
Borderless
A4, Letter, Ledger, A3, Photo 10  15 cm,
Photo 2L 13  18 cm 5
1
Memory cards, adapters and USB Flash memory drive are not included.
2
USB 2.0 Standard
USB Mass Storage standard from 16 MB to 32 GB
Support format: FAT12/FAT16/FAT32
3
Progressive JPEG format is not supported.
4
Motion JPEG only
5
See Paper type and size for each operation on page 27.
D
131
PictBridge
Compatibility
D
Supports the Camera & Imaging Products Association
PictBridge standard CIPA DC-001.
Visit http://www.cipa.jp/pictbridge/ for more information.
Interface
132
USB direct interface
Specifications
Scanner
D
Colour/Monochrome
Yes/Yes
TWAIN Compliant
Yes (Windows® 2000 Professional/Windows® XP/
Windows® XP Professional x64 Edition/Windows Vista®/
Windows® 7)
Mac OS X 10.4.11, 10.5.x, 10.6.x 1
WIA Compliant
Yes (Windows® XP 2/Windows Vista®/Windows® 7)
ICA Compliant
Yes (Mac OS X 10.6.x)
Colour Depth
48 bit colour Processing (Input)
24 bit colour Processing (Output)
(Actual Input: 30 bit colour/Actual Output: 24 bit colour)
Resolution
Up to 19200  19200 dpi (interpolated) 3
Up to 2400  2400 dpi (optical) (Scanner Glass)
Up to 2400  1200 dpi (optical) (ADF)
Scanning Speed
Monochrome: up to 3.49 sec.
Colour: up to 3.37 sec.
(A4 size at 100  100 dpi)
Scanning Width
Up to 291 mm
Scanning Length
Up to 426 mm
Greyscale
256 levels
1
For the latest driver updates for the Mac OS X you are using, visit us at http://solutions.brother.com/.
2
Windows® XP in this User’s Guide includes Windows® XP Home Edition, Windows® XP Professional, and Windows®
XP Professional x64 Edition.
3
Maximum 1200  1200 dpi scanning when using the WIA Driver for Windows® XP, Windows Vista® and Windows® 7
(resolution up to 19200  19200 dpi can be selected by using the Brother scanner utility).
D
133
Printer
D
Resolution
Up to 1200  6000 dpi
Printing Width
291 mm [297 mm (borderless) 1] 3
Borderless
A4, Letter, Ledger, A3, A6, Photo 10  15 cm,
Index Card 127  203 mm
Photo L 89  127 mm, Photo 2L 13  18 cm 2
Duplex
 Paper type:
Plain paper
 Paper size:
A4, Letter, Ledger 4, A3 4, Legal, A5, A6, Executive
Print Speed 5
1
When the Borderless feature is set to On.
2
See Paper type and size for each operation on page 27.
3
When printing on A3 size paper.
4
Minimum top and bottom margins of 22 mm
5
For detailed specifications visit http://www.brother.com/.
134
Specifications
Interfaces
D
USB 1 2
A USB 2.0 interface cable that is no longer than 2 m.
LAN cable 3
Ethernet UTP cable category 5 or greater.
Wireless LAN
IEEE 802.11b/g/n (Infrastructure/Ad-hoc Mode)
1
Your machine has a Hi-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB
1.1 interface.
2
Third party USB ports are not supported.
3
See the Network User’s Guide for detailed network specifications.
D
135
Computer requirements
D
SUPPORTED OPERATING SYSTEMS AND SOFTWARE FUNCTIONS
Computer Platform &
Operating System Version
Windows®
Operating
System 1
Windows® 2000
Professional 6
Windows® XP Home 2 5
Windows® XP
Professional 2 5
Windows® XP
Professional x64 Edition 2
Supported
PC Software
Functions
PC
Interface
For
Drivers
For
Applications
USB,
Intel® Pentium® II 64 MB 256 MB 150 MB 500 MB
PC Fax , 10/100
or equivalent
Base-TX
Scanning,
128 MB
150 MB 500 MB
Removable (Ethernet),
Wireless
Disk 7
802.11b/g/n
64-bit (Intel® 64 or
256 MB 512 MB 150 MB 500 MB
AMD64) supported CPU
Intel® Pentium® 4
or equivalent
®
64-bit (Intel 64
or AMD64)
supported CPU
Printing
Windows Server® 2003
x64 Edition (print only
via network)
10/100
Base-TX
(Ethernet),
Wireless
802.11b/g/n
Intel® Pentium®III
or equivalent
Intel® Pentium®III
or equivalent
Windows Server® 2003
R2 x64 Edition (print
only via network)
64-bit (Intel® 64
or AMD64)
supported CPU
Windows Server® 2008
(print only via network)
Intel® Pentium® 4 or
equivalent 64-bit
(Intel® 64 or AMD64)
supported CPU
Windows Server® 2008
R2 (print only via network)
64-bit (Intel® 64 or
AMD64) supported CPU
Printing,
PC Fax
Send 4,
Scanning,
Removable
Disk 7
USB 3,
10/100
Base-TX
(Ethernet),
Wireless
802.11b/g/n
512 MB
1 GB
500 MB 1.2 GB
1 GB
1 GB 650 MB 1.2 GB
(32 bit) (32 bit)
2 GB
2 GB
(64 bit) (64 bit)
256 MB 512 MB
50 MB
N/A
80 MB
400 MB
64-bit (Intel® 64
or AMD64)
supported CPU
Windows Server® 2003
R2 (print only via network)
Mac OS X 10.6.x
Hard Disk Space to install
4
Windows® 7 2 5
Macintosh Mac OS X
Operating 10.4.11, 10.5.x
System
Minimum Recommended
RAM
RAM
Printing,
Windows Vista® 2 5
Windows Server® 2003
(print only via network)
Processor
Minimum
Speed
512 MB
1 GB
2 GB
PowerPC G4/G5
Intel® Core™
Processor
512 MB
1 GB
Intel® Core™
Processor
1 GB
2 GB
Conditions:
1
2
3
4
5
6
7
136
Microsoft® Internet Explorer® 5.5 or greater.
For WIA, 1200  1200 resolution. Brother Scanner
Utility enables to enhance up to 19200  19200 dpi.
Third party USB ports are not supported.
PC Fax supports black and white only.
PaperPort™12SE supports Windows® XP (SP3 or higher),
Windows Vista® (SP2 or higher) and Windows® 7.
PaperPort™11SE supports Microsoft® SP4 or higher
for Windows® 2000 (Available from the internet).
Removable disk is a function of PhotoCapture Center™.
For the latest driver updates, visit us at
http://solutions.brother.com/.
All trademarks, brand and product names are the
property of their respective companies.
Specifications
Consumable items
D
Ink
The machine uses individual Black, Yellow, Cyan and Magenta ink
cartridges that are separate from the print head assembly.
Service Life of Ink
Cartridge
The first time you install a set of ink cartridges the machine will use
an amount of ink to fill the ink delivery tubes for high quality
printouts. This process will only happen once. After this process is
complete the cartridges provided with your machine will have a
lower yield than standard cartridges (65%). With all following ink
cartridges you can print the specified number of pages.
Replacement
Consumables
<Super High Yield Black> LC1280XLBK
<Super High Yield Yellow> LC1280XLY
<Super High Yield Cyan> LC1280XLC
<Super High Yield Magenta> LC1280XLM
Black - Approximately 2,400 pages 1
Yellow, Cyan, Magenta - Approximately 1,200 pages 1
<High Yield Black> LC1240BK
<High Yield Yellow> LC1240Y
<High Yield Cyan> LC1240C
<High Yield Magenta> LC1240M
Black, Yellow, Cyan, Magenta - Approximately 600 pages 1
1
Approx. cartridge yield is declared in accordance with ISO/IEC 24711.
For more information about the replacement consumables, visit us
at http://www.brother.com/pageyield/.
What is Innobella™?
Innobella™ is a range of genuine consumables offered by Brother.
The name "Innobella™" derives from the words "Innovation" and
"Bella" (meaning "Beautiful" in Italian) and is a representation of the
"innovative" technology providing you with "beautiful" and "long
lasting" print results.
When you print photo images, Brother recommends Innobella™
glossy photo paper (BP71 series) for high quality. Brilliant prints are
made easier with Innobella™ Ink and paper.
D
137
Network (LAN)
D
Note
For details about the full Network specifications, see the Network User’s Guide.
LAN
You can connect your machine to a network for Network Printing,
Network Scanning, PC Fax Send, PC Fax Receive (Windows® only),
Remote Setup, and access photos from PhotoCapture Center™ 1.
Also included is Brother BRAdmin Light 2 Network Management
software.
Wireless Network
Security
SSID (32 chr), WEP 64/128 bit, WPA-PSK (TKIP/AES),
WPA2-PSK (AES)
Setup Support Utility
AOSS™
Yes
WPS
Yes
1
See the Computer Requirements chart on page 136.
2
If you require more advanced printer management, use the latest Brother BRAdmin Professional utility version that is
available as a download from http://solutions.brother.com/.
138
E
Index
E
A
D
ADF (automatic document feeder) ...........29
Answering machine (TAD) .......................44
connecting ............................................44
Apple Macintosh
See Software User's Guide.
Automatic
fax receive ............................................36
Fax Detect .........................................39
Dialling
a pause ................................................ 52
access codes and credit card
numbers ............................................... 54
Caller ID history .................................... 51
manual ................................................. 49
One Touch ........................................... 49
Outgoing Call ....................................... 51
Speed Dial ............................................ 49
Document
loading ............................................ 29, 30
B
Brother
CreativeCenter ........................................3
C
Caller ID ...................................................41
Caller ID history ....................................51
Add To Phone Book ...........................51
Delete ................................................51
Send a fax ..........................................51
Cleaning
print head ..............................................69
scanner .................................................68
Connecting
external TAD (answering machine) .......44
external telephone ................................45
Consumable items .................................137
Control panel overview ..............................4
ControlCenter
See Software User's Guide.
Copy
paper size .............................................56
paper type .............................................56
tray use .................................................23
using scanner glass ..............................30
Cordless telephone ..................................47
Custom telephone features on a single
line ...........................................................92
E
Envelopes ............................. 17, 19, 27, 28
Error messages on LCD .......................... 72
B&W Print Only .................................... 72
Cannot Detect ...................................... 73
Cannot Print ......................................... 73
Comm. Error ......................................... 73
Cover is Open ...................................... 73
Data Remaining ................................... 73
Document Jam ..................................... 73
Ink Absorber Full .................................. 74
Ink Absorber NearFull .......................... 74
Ink Low ................................................. 74
No Ink Cartridge ................................... 75
No Paper Fed ....................................... 75
Not Registered ............................... 49, 75
Out of Memory ..................................... 76
Paper Jam ............................................ 76
Unable to Clean ................................... 77
Unable to Init. ....................................... 77
Unable to Print ..................................... 77
Unable to Scan ..................................... 77
Wrong Paper Size ................................ 78
Wrong Tray Setting .............................. 78
Extension telephone, using ............... 46, 47
External telephone, connecting ............... 45
139
F
I
Fax codes
changing ...............................................48
Remote Activation Code .......... 39, 46, 47
Remote Deactivation Code ............ 46, 47
using .....................................................47
Fax Detect ................................................39
Fax, from PC
See Software User's Guide.
Fax, stand-alone
receiving ................................................36
difficulties .................................... 90, 91
F/T Ring Time, setting ........................38
Fax Detect ..........................................39
Fax Preview ................................ 39, 40
from extension telephone ............ 46, 47
Ring Delay, setting .............................38
telephone line interference / VoIP ......95
tray use ..............................................24
sending .................................................32
change scanner glass size .................33
colour fax ...........................................33
difficulties ...........................................91
Fax Preview .......................................34
telephone line interference / VoIP ......95
Transmission Verification Report .......34
Fax/Tel mode
answering at extension
telephones ..................................... 46, 47
Remote Activation Code ................ 46, 47
Remote Deactivation Code ............ 46, 47
Ring Delay ............................................38
Ink cartridges
ink dot counter ...................................... 66
replacing ............................................... 66
Innobella™ ............................................ 137
J
Jams
document .............................................. 80
paper .................................................... 81
L
Labels ................................... 17, 26, 27, 28
LCD (Liquid Crystal Display) ................... 97
Brightness .............................................. 9
M
G
Macintosh
See Software User's Guide.
Maintenance, routine
replacing ink cartridges ........................ 66
Manual
dialling .................................................. 49
receive .................................................. 36
Manual feed slot ...................................... 17
Mode, entering
Copy ....................................................... 6
Fax ......................................................... 6
PhotoCapture ......................................... 6
Scan ....................................................... 6
Multi-line connections (PBX) ................... 45
Greyscale ...................................... 129, 133
N
H
Network
Printing
See Network User's Guide.
Scanning
See Software User's Guide.
Help
LCD messages .....................................97
Menu Table ...........................................98
140
O
Q
One touch
changing ...............................................54
setting up ..............................................52
using .....................................................49
Outgoing Call
Add To Phone Book ..............................51
Delete ...................................................51
Send a fax .............................................51
Quick Dial ................................................ 52
Group dial
changing ............................................ 54
One Touch Dial
custom scan profile ........................... 52
setting up ........................................... 52
Search .................................................. 50
Speed Dial
changing ............................................ 54
using .................................................. 49
P
Paper ...................................... 25, 127, 128
capacity .................................................28
loading ..................................... 10, 13, 19
loading envelopes and postcard ...........19
printable area ........................................21
size .......................................................22
size of document ...................................29
type .......................................... 22, 23, 27
PaperPort™12SE with OCR
See Software User's Guide. See also Help
in the PaperPort™12SE application.
PhotoCapture Center™
from PC
See Software User's Guide.
Memory Stick PRO™ ............................57
Memory Stick™ ....................................57
MultiMedia Card ....................................57
Preview photos .....................................60
Print settings
Quality ................................................60
Scan to Media
change file name ...............................61
SD .........................................................57
SDHC ....................................................57
specifications ......................................131
Presto! PageManager
See Software User's Guide. See also Help
in the Presto! PageManager application.
Print
difficulties ..............................................88
paper jams ............................................81
printable area ........................................21
resolution ............................................134
specifications ......................................134
Printing
See Software User's Guide.
Programming your machine .....................97
R
Receive Mode
External TAD ........................................ 36
Fax Only ............................................... 36
Fax/Tel ................................................. 36
Manual ................................................. 36
Redial/Pause ........................................... 50
Remote Setup
See Software User's Guide.
Resolution
copy .................................................... 130
fax ...................................................... 129
print .................................................... 134
scan .................................................... 133
Ring Delay, setting .................................. 38
S
Scannable area ....................................... 31
Scanning
See Software User's Guide.
Serial Number
how to find ...............See inside front cover
Sockets
EXT
External telephone ............................ 45
Speed Dial
changing ............................................... 54
setting up .............................................. 53
using ..................................................... 49
141
E
T
W
TAD (telephone answering device),
external ............................................. 36, 44
connecting .............................................44
receive mode ........................................36
recording OGM .....................................44
Telephone line
connections ...........................................44
difficulties ..............................................91
interference / VoIP ................................95
multi-line (PBX) .....................................45
type .......................................................42
Text, entering .........................................124
special characters ...............................124
Transferring your faxes or
Fax Journal report ....................................79
Transparencies .......... 25, 26, 28, 127, 128
Tray Select key ........................................56
Troubleshooting .......................................88
document jam .......................................80
error messages on LCD ........................72
if you are having difficulty
copying ...............................................92
document jam ....................................80
incoming calls ....................................92
Network ..............................................94
PhotoCapture Center™ .....................93
printing ...............................................88
printing received faxes .......................90
receiving faxes ...................................91
scanning .............................................92
software .............................................93
telephone line or connections ............91
maintenance messages on LCD ...........72
paper jam ..............................................81
Windows®
See Software User's Guide.
Wireless Network
See Quick Setup Guide and Network
User's Guide.
V
Volume, setting
beeper .....................................................9
ring ..........................................................8
speaker ...................................................9
142
Visit us on the World Wide Web
http://www.brother.com/
This machine is approved for use in the country of purchase only. Local Brother companies or their
dealers will only support machines purchased in their own countries.
ADVANCED
USER’S GUIDE
MFC-J6510DW
MFC-J6710DW
Version 0
UK/IRE/GEN
User's Guides and where do I find it?
Which manual?
i
What's in it?
Where is it?
Safety and Legal
Read this Guide first. Please read the Safety
Instructions before you set up your machine.
See this Guide for trademarks and legal
limitations.
Printed / In the box
Quick Setup Guide
Follow the instructions for setting up your
machine and installing the drivers and software
for the operating system and connection type
you are using.
Printed / In the box
Basic User's Guide
Learn the basic Fax, Copy, Scan and
PhotoCapture Center™ operations and how to
replace consumables. See troubleshooting tips.
Printed / In the box
Advanced User's Guide
Learn more advanced operations: Fax, Copy,
security features, printing reports and
performing routine maintenance.
PDF file /
Documentation
CD-ROM
Software User's Guide
Follow these instructions for Printing, Scanning,
Network Scanning, PhotoCapture Center™,
Remote Setup, PC-Fax, and using the Brother
ControlCenter utility.
PDF file /
Documentation
CD-ROM
Network Glossary
This Guide provides basic information about
advanced network features of Brother
machines along with explanations about
general networking and common terms.
PDF file /
Documentation
CD-ROM
Network User's Guide
This Guide provides useful information about
wired and wireless network settings and
security settings using the Brother machine.
You can also find supported protocol
information for your machine and detailed
troubleshooting tips.
PDF file /
Documentation
CD-ROM
Table of Contents
1
General setup
1
Memory storage.....................................................................................................1
Automatic Daylight Saving Time............................................................................1
Sleep Mode ...........................................................................................................2
LCD display ...........................................................................................................2
Setting the Dim Timer for the backlight ...........................................................2
Setting the Wallpaper ......................................................................................2
Mode Timer............................................................................................................3
2
Security features
4
Secure Function Lock 2.0 ......................................................................................4
Before you begin to use Secure Function Lock 2.0.........................................4
Setting and changing the Administrator Password..........................................5
Setting up restricted users...............................................................................5
Turning Secure Function Lock on/off...............................................................6
Switching users ...............................................................................................6
Changing to the Public mode ..........................................................................6
3
Sending a fax
7
Additional sending options.....................................................................................7
Sending faxes using multiple settings .............................................................7
Stop faxing.......................................................................................................7
Contrast ...........................................................................................................7
Changing fax resolution...................................................................................8
Setting your changes as a new default............................................................8
Restoring fax settings to the factory settings...................................................8
Additional sending operations................................................................................9
Sending a fax manually ...................................................................................9
Sending a fax at the end of a conversation .....................................................9
Dual Access (Monochrome only).....................................................................9
Broadcasting (Monochrome only).................................................................. 10
Real Time Transmission................................................................................ 11
Overseas Mode .............................................................................................12
Delayed Faxing (Monochrome only).............................................................. 12
Delayed Batch Transmission (Monochrome only)......................................... 12
Checking and cancelling waiting jobs ............................................................12
Polling overview................................................................................................... 13
Polled Transmit (Monochrome only).............................................................. 13
ii
4
Receiving a fax
14
Memory Receive (Monochrome only)..................................................................14
Out of Paper Reception .................................................................................14
Fax Forwarding..............................................................................................14
Fax Storage ...................................................................................................15
Printing a fax from the memory .....................................................................15
PC-Fax Receive (Windows® only).................................................................15
Turning off Memory Receive operations........................................................17
Changing Memory Receive operations .........................................................17
Remote Retrieval .................................................................................................18
Setting a Remote Access Code.....................................................................18
Using your Remote Access Code..................................................................18
Remote Fax commands ................................................................................19
Retrieving fax messages ...............................................................................20
Changing your Fax Forwarding number ........................................................20
Additional receiving operations............................................................................21
Printing a reduced incoming fax ....................................................................21
Polling overview...................................................................................................21
Polling receive ...............................................................................................21
5
Dialling and storing numbers
23
Voice operations ..................................................................................................23
BT Call Sign (U.K. only).................................................................................23
Additional dialling operations ...............................................................................24
Combining Quick Dial numbers .....................................................................24
Additional ways to store numbers ........................................................................25
Storing One Touch numbers from Outgoing Calls.........................................25
Storing One Touch numbers from the Caller ID history.................................25
Storing Speed Dial numbers from Outgoing Calls.........................................26
Storing Speed Dial numbers from the Caller ID history .................................26
Setting up groups for broadcasting................................................................27
6
Printing reports
29
Fax reports...........................................................................................................29
Transmission Verification Report...................................................................29
Fax Journal (activity report) ...........................................................................29
Reports ................................................................................................................30
How to print a report ......................................................................................30
iii
7
Making copies
31
Copy settings ....................................................................................................... 31
Stop copying.................................................................................................. 31
Changing copy speed and quality .................................................................31
Enlarging or reducing the copied image ........................................................ 32
Making N in 1 copies or a poster (Page Layout) ........................................... 33
2 in 1 ID Copy................................................................................................ 35
Sorting copies using the ADF ........................................................................36
Adjusting Density........................................................................................... 36
Ink Save Mode...............................................................................................36
Thin Paper Copy............................................................................................ 37
Skew Adjustment........................................................................................... 37
Book Copy ..................................................................................................... 38
Watermark Copy............................................................................................ 38
Duplex (2-sided) copying ...............................................................................40
Setting your changes as a new default..........................................................41
Restoring all settings to the factory settings .................................................. 41
8
Printing photos from a memory card or
USB Flash memory drive
42
PhotoCapture Center™ operations ..................................................................... 42
Memory cards, USB Flash memory drive and folder structures .................... 42
Movie printing ................................................................................................ 43
Print Images......................................................................................................... 43
Print Index (Thumbnails) ...............................................................................43
Printing Photos .............................................................................................. 44
Print All Photos .............................................................................................. 45
Enhance Photos ............................................................................................ 45
Search by Date.............................................................................................. 49
Slide Show..................................................................................................... 49
Trimming........................................................................................................50
DPOF printing................................................................................................ 50
PhotoCapture Center™ print settings.................................................................. 51
Print Quality ................................................................................................... 51
Paper options ................................................................................................ 51
Adjusting Brightness, Contrast and Colour.................................................... 52
Cropping ........................................................................................................53
Borderless printing......................................................................................... 53
Date Print....................................................................................................... 53
Setting your changes as a new default..........................................................54
Restoring all settings to the factory settings .................................................. 54
Scan to a memory card or USB Flash memory drive .......................................... 54
Glass Scan Size ............................................................................................ 54
Auto Crop ......................................................................................................55
How to set a new default ...............................................................................56
How to reset to factory settings ..................................................................... 56
iv
9
Printing photos from a camera
57
Printing photos directly from a PictBridge camera ...............................................57
PictBridge requirements ................................................................................57
Setting your digital camera ............................................................................57
Printing Images..............................................................................................58
DPOF printing ................................................................................................58
Printing photos directly from a digital camera (without PictBridge)......................59
Printing Images..............................................................................................59
A
Routine maintenance
60
Cleaning and checking the machine ....................................................................60
Cleaning the outside of the machine .............................................................60
Cleaning the machine’s printer platen ...........................................................61
Cleaning the paper feed rollers .....................................................................61
Cleaning the paper pick-up rollers .................................................................62
Cleaning the paper pick- up rollers for paper tray #2
(MFC-J6710DW only)................................................................................64
Checking the ink volume ...............................................................................64
Packing and shipping the machine ......................................................................65
v
B
Glossary
67
C
Index
71
1
General setup
Memory storage
Even if there is a power failure, you will not
lose the settings you have chosen using the
Menu key because they are stored
permanently. Also, you will not lose your
settings in the FAX, SCAN, COPY and
PHOTO CAPTURE mode key menus if you
have chosen Set New Default. You may
have to reset the date and time.
Note
During a power failure the machine will
retain messages that are in the memory
for approximately 24 hours.
1
1
1
Automatic Daylight
Saving Time
1
You can set the machine to change
automatically for daylight saving time. It will
reset itself forward one hour in the Spring and
backward one hour in the Autumn. Make sure
you have set the correct date and time in the
Date&Time setting.
a
b
Press Menu.
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
Auto Daylight.
d
Press d or c to choose Off (or On).
Press OK.
e
Press Stop/Exit.
1
Chapter 1
Sleep Mode
You can choose how long the machine will
remain idle (from 1 to 60 minutes) before it
goes into sleep mode. The timer will restart if
any operation is carried out on the machine.
a
b
c
d
e
1
LCD display
Setting the Dim Timer for the
backlight
Press Menu.
You can set how long the LCD backlight stays
on after the last key press.
Press a or b to choose
General Setup.
Press OK.
a
b
Press a or b to choose Sleep Mode.
Press d or c to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins.
Press OK.
Press Stop/Exit.
1
1
Press Menu.
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
e
Press a or b to choose Dim Timer.
f
Press Stop/Exit.
Press d or c to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
Setting the Wallpaper
1
You can change the wallpaper.
a
b
2
Press Menu.
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose Wallpaper.
Press OK.
e
Press a or b to choose your wallpaper
from the four available designs.
Press OK.
f
Press Stop/Exit.
General setup
Mode Timer
1
1
The machine has four temporary mode keys
on the control panel: FAX, SCAN, COPY and
PHOTO CAPTURE. You can change the
amount of time the machine takes after the
last Scan, Copy or PhotoCapture operation
before it returns to Fax mode. If you choose
Off, the machine stays in the mode you used
last.
a
b
c
d
e
Press Menu.
Press a or b to choose
General Setup.
Press OK.
Press a or b to choose Mode Timer.
Press d or c to choose 0Sec, 30Secs,
1Min, 2Mins, 5Mins or Off.
Press OK.
Press Stop/Exit.
3
2
Security features
Secure Function Lock
2.0
Secure Function Lock lets you restrict public
access to certain machine functions:
 Fax Tx (Fax Transmit)
 Fax Rx (Fax Receive)
 Copy
 Scan
Before you begin to use
Secure Function Lock 2.0
2
You can configure Secure Function Lock 2.0
settings using a Web browser. Before
configuration, following preparations are
needed.
a
b
 PCC
 PC Print
Access to restricted operations can be
enabled by creating a restricted user.
Restricted users must enter a user password
to use the machine.
Make a careful note of your password. If you
forget it, please call your Brother dealer for
service.
Note
• Only administrators can set limitations
and make changes for each user.
• If Fax Tx is disabled, you cannot use any
functions in the Fax menu.
• Polling Receive is enabled only when both
Fax Tx and Fax Rx are enabled.
4
Type “http://machine’s IP
address/” into your browser's address
bar (where “machine’s IP address”
is the machine’s IP address).
http://192.168.1.2/
 Page Limit
Before using the security features you must
first enter an administrator password.
Start your Web browser.
 For example:
 Colour Print
This feature also prevents users from
changing the default settings of the machine
by limiting access to the menu settings.
2
Note
You can find the machine's IP address in
the Network Configuration List. (See
Printing the Network Configuration List in
the Network User’s Guide.)
c
Enter a password in Login box. (This is
a password to log into the machine's
Web page, not the administrator
password for Secure Function Lock.)
Click
.
2
Security features
Note
If you are using a Web browser to
configure the machine's setting for the first
time, set a password.
1
Enter a password you want to use
(up to 32 characters).
3
Re-enter the password in
Confirm new password box.
4
Click Submit.
Setting and changing the
Administrator Password
2
You can configure these settings using a
Web browser. To set up the Web page, see
Before you begin to use Secure Function
Lock 2.0 on page 4. Then follow the
instructions below.
Setting the administrator password
The password you set in these steps is for the
administrator. This password is used to set
up users and to turn Secure Function Lock on
or off. (See Setting up restricted users
on page 5 and Turning Secure Function Lock
on/off on page 6.)
a
b
c
Click Administrator.
Click Secure Function Lock.
Re-enter the password in the
Retype Password box.
e
Click Submit.
Changing the administrator password
Click
Please configure the password.
2
d
a
b
c
Click Administrator.
d
Re-enter the password in the
Retype Password box.
e
Click Submit.
2
Click Secure Function Lock.
Enter a four-digit number for the new
password in the New Password box.
Setting up restricted users
2
You can set up users with restrictions and a
password. You can set up to 10 users.
2
You can configure these settings using a
Web browser.
To set up the Web page, see Before you
begin to use Secure Function Lock 2.0
on page 4. Then follow the instructions
below.
a
b
c
Click Administrator.
Click Secure Function Lock.
Enter an up to 15 digit alphanumeric
group name or user name in the
ID Number/Name box and then enter a
four-digit password in the PIN box.
Enter a four-digit number for the
password in the New Password box.
5
2
Chapter 2
d
Turning Secure Function Lock off
Uncheck the functions that you want to
restrict in the Print box or the Others
box. If you want to configure the
maximum page count, check the On box
in Page Limit, and then enter the
number in the Max. box. Then click
Submit.
a
b
Press Menu.
c
Enter your four-digit administrator
password.
Press OK.
Note
• You cannot use the same password as
another user’s password.
Turning Secure Function
Lock on/off
Press Menu.
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
Function Lock.
Press OK.
d
Press a or b to choose Lock OffiOn.
Press OK.
e
Enter your four-digit administrator
password.
Press OK.
6
a
Hold down Shift as you press l.
Or, press Menu. Then press a or b to
choose Change User and press OK.
b
Press a or b to choose your user name.
Press OK.
c
Enter your four-digit user password.
Press OK.
2
If you enter the wrong password, the LCD
will show Wrong Password. Enter the
correct password.
a
b
2
This setting allows a restricted user to log on
the machine when Secure Function Lock is
turned on.
Note
Turning Secure Function Lock on
Press a or b to choose Lock OniOff.
Press OK.
Switching users
• You can set up one Public user. Public
users do not need to enter a password.
For more information, see the Network
User's Guide.
2
2
Changing to the Public mode
a
b
2
Press Menu.
Press a or b to choose Go to Public.
Press OK.
Note
After a restricted user has finished using
the machine, it will return to the Public
setting within the same time as the Mode
Timer setting. (See Mode Timer
on page 3.)
3
Sending a fax
Additional sending
options
Sending faxes using multiple
settings
Contrast
3
3
When you send a fax you can choose any
combination of these settings: resolution,
contrast, scan size, etc.
a
Press
(FAX).
The LCD shows:
Fax
FAX
Press Start
Enter Number
Fax Resolution
Contrast
Glass ScanSize
b
Standard
Auto
A4
Press d or c to choose an option.
Press OK.
d
Go back to b to change more settings.
3
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Choose Light when sending a light
document. Choose Dark when sending a
dark document.
a
Press
b
c
Press a or b to choose Contrast.
(FAX).
Press d or c to choose Auto, Light or
Dark.
Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
Press a or b to choose a setting you
want to change.
c
3
• When you send a colour fax.
• When you choose Photo as the Fax
Resolution.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as the
default. These settings will stay until you
change them again. (See Setting your
changes as a new default on page 8.)
Stop faxing
3
To stop faxing, press Stop/Exit.
7
3
Chapter 3
Changing fax resolution
The quality of a fax can be improved by
changing the fax resolution.
a
Press
b
Press a or b to choose
Fax Resolution.
c
Press d or c to choose the resolution
you want.
Press OK.
(FAX).
3
Setting your changes as a
new default
You can save the fax settings for
Fax Resolution, Contrast,
Glass ScanSize and Real Time TX you
use most often by setting them as default.
These settings will stay until you change
them again.
a
Press
b
Press a or b to choose the menu option
that you want to change. Press d or c to
choose your new option.
Note
You can choose four different resolution
settings for monochrome faxes and two
for colour.
Monochrome
Standard
Suitable for most typed
documents.
Fine
Good for small print and
transmits a little slower than
Standard resolution.
S.Fine
Good for small print or artwork
and transmits slower than Fine
resolution.
Photo
Use when the document has
varying shades of grey or is a
photograph. Photo has the
slowest transmission.
Colour
(FAX).
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d
e
Press 1 to choose Yes.
Press Stop/Exit.
Restoring fax settings to the
factory settings
You can restore the fax settings
Fax Resolution, Contrast,
Glass ScanSize and Real Time TX, that
you have changed, to the factory settings.
Standard
Suitable for most typed
documents.
a
Press
Fine
Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.
b
Press a or b to choose
Factory Reset.
Press OK.
c
d
Press 1 to choose Yes.
If you choose S.Fine or Photo and then
use the Colour Start key to send a fax,
the machine will send the fax using the
Fine setting.
8
3
(FAX).
Press Stop/Exit.
3
Sending a fax
Additional sending
operations
Sending a fax manually
Sending a fax at the end of a
conversation
3
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
Note
To send a multiple page fax, use the ADF.
a
Press
b
c
Load your document.
d
e
f
(FAX).
To listen for a dial tone pick up the
handset of the external telephone.
Dial the fax number.
When you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass
press 1 on the machine to send a fax.
Replace the handset of the external
phone.
3
3
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Press
c
d
Load your document.
3
(FAX).
Press Mono Start or Colour Start.
 If you are using the scanner glass,
press 1 to send a fax.
e
Replace the handset of the external
phone.
Dual Access
(Monochrome only)
3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
9
Chapter 3
Broadcasting
(Monochrome only)
Note
3
If you want to broadcast using an E-mail
address, press a or b to choose
Dial Type, then press d or c to change
the option to E-Address, and then enter
the E-mail address and press OK. (See
Entering Text in appendix C of the Basic
User's Guide.)
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups,
One Touch, Speed Dial numbers, and up to
50 manually dialled numbers in the same
broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
Before you begin the broadcast
Note
If you chose Numeric Order:
Speed Dial numbers start with #.
One Touch numbers start with l.
Group numbers must also be stored in the
machine's memory before they can be used
in a broadcast. Group numbers include many
stored One Touch Dial and Speed Dial
numbers for easier dialling. (See Setting up
groups for broadcasting on page 27.)
a
b
c
d
Press
Load your document.
Press a or b to choose Broadcasting.
Press OK.
 Press a or b to choose Add Number
and enter a number using the dial
pad.
Press OK.
10
3
(FAX).
You can add numbers to the broadcast
in the following ways:
 Press a or b to choose Phone Book
and OK. Press a or b to choose
Alphabetic Order or
Numeric Order and OK.
Press a or b to select a number and
OK.
3
One Touch and Speed Dial numbers must be
stored in the machine's memory before they
can be used in a broadcast. (See Storing One
Touch Dial numbers and Storing Speed Dial
numbers in chapter 7 of the Basic User's
Guide.)
How to broadcast a fax
If you downloaded Internet Fax:
e
After you have entered all the fax
numbers by repeating step d, press
a or b to choose Complete.
Press OK.
f
Press Mono Start.
Note
• If you did not use up any of the numbers
for Groups, you can “broadcast” faxes to
as many as 266 different numbers.
• The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access and delayed
fax.
• If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Sending a fax
Cancelling a Broadcast in progress
a
b
c
d
e
f
g
h
Press Menu.
Press a or b to choose Fax.
Press OK.
Press a or b to choose
Remaining Jobs.
Press OK.
The LCD will show the fax number being
dialled and the Broadcast job number.
Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes i Press 1
No
i Press 2
Press 1 to cancel the fax number being
dialled.
The LCD will then show the Broadcast
job number.
Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes i Press 1
No
i Press 2
To cancel the Broadcast, press 1.
3
Real Time Transmission
3
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a
Press
b
c
Press a or b to choose Real Time TX.
(FAX).
Press d or c to choose On (or Off).
Press OK.
Note
• If the memory is full and you are sending a
black & white fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to
Off). Faxes from the scanner glass
cannot be sent until you clear some of the
memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
Press Stop/Exit.
11
3
Chapter 3
Overseas Mode
3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a
Press
b
c
Load your document.
d
Press a or b to choose
Overseas Mode.
Press d or c to choose On (or Off).
Press OK.
3
You can store up to 50 faxes in the memory
to be sent within 24 hours. These faxes will
be sent at the time of day you enter in step e.
a
Press
b
c
d
Load your document.
e
Enter the time you want the fax to be
sent (in 24-hour format).
(For example, enter 19:45 for 7:45 PM.)
Press OK.
(FAX).
a
b
c
Press
d
Press Stop/Exit.
Press d or c to choose On.
Press OK.
(FAX).
Press a or b to choose Batch TX.
Press d or c to choose On.
Press OK.
Checking and cancelling
waiting jobs
You can check which jobs are still waiting in
the memory to be sent, or cancel a job.
(If there are no jobs, the LCD shows
No Jobs Waiting.)
a
b
Press Menu.
c
Press a or b to choose
Remaining Jobs.
Press OK.
Any waiting jobs appear on the LCD.
d
Press a or b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
e
Do one of the following:
Press a or b to choose Delayed Fax.
Note
Press a or b to choose Fax.
Press OK.
 To cancel, press 1 to choose Yes.
The number of pages you can scan into
the memory depends on the amount of
data that is printed on each page.
If you want to cancel another job go
to step d.
 To exit without cancelling, press 2 to
choose No.
f
12
3
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time. All delayed faxes that are
scheduled to be sent at the same time to the
same fax number will be sent as one fax to
save transmission time.
(FAX).
Delayed Faxing
(Monochrome only)
Delayed Batch Transmission
(Monochrome only)
When you have finished, press
Stop/Exit.
3
Sending a fax
Polling overview
h
3
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polled Transmit
(Monochrome only)
Setup for polled transmit with secure
code
Secure Polling only works with Brother fax
machines. If another person wants to retrieve
a fax from your machine, they will have to
enter the secure code.
3
a
Press
b
c
d
Load your document.
(FAX).
Press a or b to choose Polled TX.
Press d or c to choose Secure.
Press OK.
a
Press
b
c
d
Load your document.
e
Enter a four-digit number.
Press OK.
Press a or b to choose Polled TX.
f
Press a or b to choose any settings you
want to change, and then press d or c to
choose your option and press OK.
After each setting is accepted, you can
continue to change more settings.
g
h
Press Mono Start.
f
g
(FAX).
Press d or c to choose Standard.
Press OK.
Press a or b to choose any settings you
want to change, and then press d or c to
choose your option and press OK.
After each setting is accepted, you can
continue to change more settings.
Press Mono Start.
 Press 2 or Mono Start to send the
document.
If you are using the scanner glass, the
LCD will prompt you to choose one of
the options.
 Press 1 to send another page.
Go to i.
If you are using the scanner glass, the
LCD will prompt you to choose one of
the options.
 Press 1 to send another page.
Go to step h.
3
3
The document will be stored and can be
retrieved by any other fax machine until you
delete it from the memory. (See Checking
and cancelling waiting jobs on page 12.)
e
3
Secure Polling lets you restrict who can get
the documents you set up to be polled.
Polled transmit lets you set up your machine
to wait with a document so another fax
machine can call and retrieve it.
Setup for polled transmit
Place the next page on the scanner
glass.
Press OK.
Repeat steps g and h for each
additional page.
Your machine will automatically send
the fax.
 Press 2 or Mono Start to send the
document.
i
Place the next page on the scanner
glass, press OK. Repeat steps h and i
for each additional page.
Your machine will automatically send
the fax.
13
4
Receiving a fax
Memory Receive
(Monochrome only)
Fax Forwarding
4
You can only use one Memory Receive
operation at a time:
 Fax Forwarding
 Fax Storage
 PC-Fax Receive
 Off
You can change your selection at any time. If
received faxes are still in the machine’s
memory when you change the Memory
Receive operation, a message will appear on
the LCD. (See Changing Memory Receive
operations on page 17.)
Out of Paper Reception
As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paper Fed. Put some paper in the
paper tray. (See Loading paper and other
print media in chapter 2 of the Basic User’s
Guide.)
4
When you choose Fax Forward, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
a
b
Press Menu.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose
Memory Receive.
Press OK.
e
Press a or b to choose Fax Forward.
Press OK.
f
Enter the forwarding number (up to
20 digits).
Press OK.
g
Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
If you don't put paper in the paper tray, the
machine will carry on receiving the fax, with
the remaining pages being stored in memory,
if enough memory is available.
Further incoming faxes will also be stored in
memory until the memory is full. To print the
faxes, put fresh paper in the tray. When the
memory is full the machine will stop
automatically answering calls.
4
Press a or b to choose Fax.
Press OK.
IMPORTANT
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is a
safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
• When you receive a colour fax, your
machine prints the colour fax at your
machine but does not send the fax to the
fax forwarding number you programmed.
h
14
Press Stop/Exit.
4
Receiving a fax
Fax Storage
4
If you choose Fax Storage, your machine
stores the received fax in the memory. You
will be able to retrieve fax messages from
another location using the remote retrieval
commands.
c
Press a or b to choose Fax Storage.
Press OK.
Even if you have turned off your PC (at night
or on the weekend, for example), your
machine will receive and store your faxes in
its memory. The number of received faxes
that are stored in the memory will appear at
the bottom left side of the LCD.
When you start your PC and the PC-FAX
Receiving software runs, your machine
transfers your faxes to your PC automatically.
Press Stop/Exit.
To transfer the received faxes to your PC you
must have the PC-FAX Receiving software
running on your PC. (For details, see PC-FAX
receiving in the Software User’s Guide.)
Note
Colour faxes cannot be stored in the
memory. When you receive a colour fax
your machine prints the colour fax at your
machine.
Printing a fax from the
memory
If you have chosen Fax Storage, you can still
print a fax from the memory when you are at
your machine.
a
b
c
If you choose Backup Print:On the
machine will also print the fax.
4
a
b
Press Menu.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose
Memory Receive.
Press OK.
Press Menu.
Press a or b to choose Fax.
Press OK.
4
If you turn on the PC-Fax Receive feature
your machine will store received faxes in
memory and send them to your PC
automatically. You can then use your PC to
view and store these faxes.
Press a or b to choose
Setup Receive.
Press OK.
e
f
PC-Fax Receive
(Windows® only)
Press a or b to choose Fax.
Press OK.
Press a or b to choose
Memory Receive.
Press OK.
Press Stop/Exit.
When you print a fax from the memory, the
fax data will be erased.
Press Menu.
d
Press Mono Start.
Note
If you have set Fax Storage, a backup copy
will automatically be printed at the machine.
a
b
d
e
Press a or b to choose Fax.
Press OK.
Press a or b to choose
Print Document.
Press OK.
15
4
Chapter 4
e
Press a or b to choose
PC Fax Receive.
Press OK.
Changing the destination PC
a
b
Press Menu.
c
Press a or b to choose
Setup Receive.
Press OK.
d
Press a or b to choose
Memory Receive.
Press OK.
e
Press a or b to choose
PC Fax Receive.
Press OK.
f
The LCD shows the message
Run PC-Fax on your computer.
Press OK.
• Before you can set up PC-Fax Receive
you must install the MFL-Pro Suite
software on your PC. Make sure your PC
is connected and turned on. (For details
see PC-FAX receiving in the Software
User’s Guide.)
g
Press a or b to choose Change.
Press OK.
h
Press a or b to choose <USB>, or the PC
you want to receive faxes.
Press OK.
• If you get an error message and the
machine cannot print the faxes in memory,
you can use this setting to transfer your
faxes to your PC. (For details, see
Transferring your faxes or Fax Journal
report in appendix B of the Basic User’s
Guide.)
i
Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
j
Press Stop/Exit.
f
g
h
i
The LCD shows the message
Run PC-Fax on your computer.
Press OK.
Press a or b to choose <USB> or the PC
you want to receive.
Press OK.
Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.
Press Stop/Exit.
Note
• PC-Fax Receive is not supported in the
Mac OS.
• When you receive a colour fax, your
machine prints the colour fax at your
machine but does not send the fax to your
PC.
16
Press a or b to choose Fax.
Press OK.
4
Receiving a fax
Turning off Memory Receive
operations
a
b
c
d
4
Press Menu.
Press a or b to choose Fax.
Press OK.
Press a or b to choose
Setup Receive.
Press OK.
Press a or b to choose
Memory Receive.
Press OK.
e
Press a or b to choose Off.
Press OK.
f
Press Stop/Exit.
Note
The LCD will give you more options if
there are received faxes still in the
machine’s memory. (See Changing
Memory Receive operations on page 17.)
Changing Memory Receive
operations
4
If received faxes remain in your machine’s
memory when you change the Memory
Receive Operations, the LCD will ask you
one of the following questions:
 Erase All Doc?
Yes
i Press 1
No
i Press 2
4
 Print All Fax?
Yes
i Press 1
No
i Press 2
• If you press 1, faxes in the memory will
be erased or printed before the setting
changes. If a backup copy has already
been printed it will not be printed again.
• If you press 2, faxes in the memory will
not be erased or printed and the setting
will be unchanged.
If received faxes are left in the machine's
memory when you change to
PC Fax Receive from another option
[Fax Forward or Fax Storage], press a or
b to choose the PC.
The LCD will ask you the following question:
 Send Fax to PC?
Yes
i Press 1
No
i Press 2
• If you press 1, faxes in the memory will
be sent to your PC before the setting
changes. You will be asked if you want
to turn on Backup Print. (For details,
see PC-Fax Receive (Windows® only)
on page 15.)
• If you press 2, faxes in the memory will
not be erased or transferred to your PC
and the setting will be unchanged.
17
Chapter 4
Remote Retrieval
4
You can call your machine from any
touch-tone telephone or fax machine and
then use the remote access code and remote
commands to retrieve fax messages.
Setting a Remote Access
Code
The remote access code lets you access the
remote retrieval features when you are away
from your machine. Before you can use the
remote access and retrieval features, you
have to set up your own code. The factory
default code is the inactive code (--- ).
a
b
Press Menu.
c
Press a or b to choose
Remote Access.
d
Enter a three-digit code using numbers
0-9, l, or #.
Press OK. (The preset “ ” cannot be
changed.)
Do not use the same code as your
Remote Activation Code (l 5 1) or
Remote Deactivation Code (# 5 1). (See
Operation from external and extension
telephones in chapter 6 of the Basic
User’s Guide.)
Press Stop/Exit.
Note
You can change your code at any time by
entering a new one. If you want to make
your code inactive, press Clear in step d
to restore the inactive setting (--- ) and
press OK.
18
a
Dial your fax number from a touch-tone
telephone or another fax machine.
b
When your machine answers, enter
your remote access code (3 digits
followed by ) at once.
c
The machine signals if it has received
messages:
4
 1 long beep — Fax messages
 No beeps — No messages
d
When the machine gives two short
beeps, enter a command.
The machine will hang up if you wait
longer than 30 seconds to enter a
command.
The machine will beep three times if you
enter an invalid command.
e
Press 9 0 to stop Remote Access when
you have finished.
f
Hang up.
Press a or b to choose Fax.
Press OK.
Note
e
Using your Remote Access
Code
Note
If your machine is set to Manual mode
and you want to use the remote retrieval
features, wait for about 100 seconds after
it starts ringing, and then enter the remote
access code within 30 seconds.
4
Receiving a fax
Remote Fax commands
4
Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your remote access code (3 digits followed by ), the system will give
two short beeps and you must enter a remote command.
Remote commands
95
Change the Fax Forwarding or Fax
Storage settings
1 OFF
You can choose Off after you have retrieved or erased all
your messages.
2 Fax Forwarding
One long beep means the change is accepted. If you hear
three short beeps, the change was not accepted because
something has not been set up (for example, a Fax
Forwarding number has not been registered). You can
register your Fax Forwarding number by entering 4. (See
Changing your Fax Forwarding number on page 20.) Once
you have registered the number, Fax Forwarding will work.
4 Fax Forwarding number
6 Fax Storage
96
97
Retrieve a fax
2 Retrieve all faxes
Enter the number of a remote fax machine to receive stored
fax messages. (See Retrieving fax messages on page 20.)
3 Erase faxes from the memory
If you hear one long beep, fax messages have been erased
from the memory.
Check the receiving status
1 Fax
98
Operation details
You can check whether your machine has received any
faxes. If yes, you will hear one long beep. If no, you will hear
three short beeps.
Change the Receive Mode
1 External TAD
If you hear one long beep, your change has been accepted.
2 Fax/Tel
3 Fax Only
90
Exit
Pressing 9 0 allows you to exit remote retrieval. Wait for the
long beep, then replace the handset.
19
4
Chapter 4
Retrieving fax messages
4
You can call your machine from any
touch-tone telephone and have your fax
messages sent to a machine. Before you use
this feature, you have to turn on Fax Storage.
a
b
Dial your fax number.
c
d
Changing your Fax
Forwarding number
You can change the default setting of your fax
forwarding number from another touch-tone
telephone or fax machine.
a
b
Dial your fax number.
When you hear two short beeps,
press 9 6 2.
c
When you hear two short beeps,
press 9 5 4.
Wait for a long beep, and then use the
dial pad to enter the number of the
remote fax machine where you want
your fax messages sent, followed by # #
(up to 20 digits).
d
Wait for the long beep, enter the new
number (up to 20 digits) of the remote
fax machine you want your fax
messages forwarded to using the dial
pad, then enter # #.
When your machine answers, enter
your remote access code (3 digits
followed by ) at once. If you hear one
long beep, you have messages.
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e
20
Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
When your machine answers, enter
your remote access code (3 digits
followed by ) at once. If you hear one
long beep, you have messages.
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e
Press 9 0 to stop Remote Access when
you have finished.
f
Hang up after you hear your machine
beep.
4
Receiving a fax
Additional receiving
operations
Printing a reduced incoming
fax
If you choose On, the machine automatically
reduces each page of an incoming fax to fit on
one page of A4, A3, Letter, Legal or Ledger
size paper. The machine calculates the
reduction ratio by using the page size of the
fax and your Paper Size setting. (See Paper
Size in chapter 2 of the Basic User’s Guide.)
a
b
Polling overview
4
4
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polling receive
4
Polling receive lets you call another fax
machine to receive a fax.
Press Menu.
Setup to receive polling
Press a or b to choose Fax.
Press OK.
a
Press
Press a or b to choose
Setup Receive.
Press OK.
b
c
Press a or b to choose Polling RX.
d
Press a or b to choose
Auto Reduction.
e
Press d or c to choose On (or Off).
Press OK.
d
e
f
Press Stop/Exit.
c
4
4
(FAX).
Press d or c to choose Standard.
Press OK.
Enter the fax number you are polling.
Press Mono Start or Colour Start.
Setup to receive polling with secure
code
4
Secure Polling lets you restrict who can get
the documents you set up to be polled.
Secure Polling only works with Brother fax
machines. If you want to get a fax from a
secured Brother machine you have to enter
the secure code.
a
Press
b
c
Press a or b to choose Polling RX.
(FAX).
Press d or c to choose Secure.
Press OK.
21
4
Chapter 4
d
e
f
d
Enter a four-digit secure code.
This is the same as the security code of
the fax machine you are polling.
Press OK.
 If you chose Standard, press OK
and then go to step e.
 If you chose Secure, press OK and
then enter a four-digit number.
Press OK, go to step e.
Enter the fax number you are polling.
Press Mono Start or Colour Start.
Setup to receive delayed polling
Do one of the following:
 If you chose Timer, press OK and
then enter the time (24-hour format)
you want to begin polling.
Press OK, go to step e.
4
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
e
Press a or b to choose Broadcasting.
Press OK.
a
Press
f
Do one of the following:
b
c
Press a or b to choose Polling RX.
(FAX).
Press d or c to choose Timer.
Press OK.
d
Enter the time (in 24-hour format) you
want to start polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
e
f
Enter the fax number you are polling.
Press OK.
 Press a or b to choose Phone Book
and OK. Press a or b to choose
Alphabetic Order or
Numeric Order and OK. Press
a or b to select a number and OK.
Note
Press Mono Start or Colour Start.
The machine makes the polling call at
the time you entered.
Sequential polling
(Monochrome only)
Sequential polling lets you request
documents from several fax machines in one
operation.
a
Press
b
c
Press a or b to choose Polling RX.
22
 Press a or b to choose Add Number
and enter the number using a dial
pad.
(FAX).
Press d or c to choose Standard,
Secure or Timer.
If you chose Numeric Order:
Speed Dial numbers start with #.
One Touch numbers start with l.
4
g
After you have entered all the fax
numbers by repeating step f, press
a or b to choose Complete.
Press OK.
h
Press Mono Start.
The machine polls each number or
group in turn for a document.
Press Stop/Exit while the machine is dialling
to cancel the polling process.
To cancel all sequential polling receive jobs,
see Checking and cancelling waiting jobs
on page 12.
5
Dialling and storing numbers
Voice operations
5
Voice calls can be made either with an
extension or external telephone by dialling
manually or by using Quick Dial numbers.
BT Call Sign (U.K. only)
Your machine has a BT Call Sign compatible
distinctive ringing function, allowing you to
dedicate a second telephone number (on the
same telephone line) just for receiving faxes.
Note
• You can switch BT Call Sign off
temporarily, then turn it back on. When
you get a new fax number, make sure you
reset this function. This machine will
automatically answer incoming calls that
use your new fax number.
To enable the machine to work with BT
Call Sign (with your external
telephone only)
a
b
Press Menu.
c
Press a or b to choose
Miscellaneous.
Press OK.
5
This machine feature lets you use the BT Call
Sign subscriber service which allows you to
have at least two separate telephone
numbers on one telephone line. Each
telephone number has its own distinctive
ringing pattern, so you know which telephone
number is ringing. This is one way you can
have a separate telephone number for your
machine.
5
5
Press a or b to choose Fax.
Press OK.
5
d
e
Press a or b to choose BT Call Sign.
f
Press Stop/Exit.
Press d or c to choose On (or Off).
Press OK.
Note
If you turn off BT Call Sign, the receive
mode stays in Manual. You will need to
set receive mode again. (See Choose the
Receive Mode in chapter 5 of the Basic
User’s Guide.)
• When you set the BT Call Sign feature to
On, the receive mode is set to Manual
automatically. Manual mode will not
respond to incoming telephone calls,
since the number you use for telephone
calls will use the normal ring pattern.
23
Chapter 5
Additional dialling
operations
Combining Quick Dial
numbers
5
5
Sometimes, you may want to choose from
several long distance carriers when you send
a fax. Rates may vary depending on the time
and destination. To take advantage of low
rates, you can store the access codes of longdistance carriers and credit card numbers as
One Touch and Speed Dial numbers. You
can store these long dialling sequences by
dividing them and setting them up as
separate One Touch and Speed Dial
numbers in any combination. You can even
include manual dialling using the dial pad.
(See Storing One Touch Dial numbers or
Storing Speed Dial numbers in chapter 7 of
the Basic User’s Guide.)
For example, you might have stored ‘555 ’ on
Speed Dial: 03 and ‘7000’ on One Touch: 02.
You can use them both to dial ‘555-7000’ if
you press the following keys:
a
Press
b
Press a or b to choose Search.
Press OK.
c
Press a or b to choose
Numeric Order.
Press OK.
d
Press a or b to choose #03.
Press OK.
(Phone Book).
Note
Speed Dial numbers start with #.
One Touch numbers start with l.
e
f
24
Press OK to choose Send a fax.
Press a or b to choose Phone Book.
Press OK.
g
Press a or b to choose Search.
Press OK.
h
Press a or b to choose
Numeric Order.
Press OK.
i
Press a or b to choose l02.
Press OK.
j
k
Press OK to choose Send a fax.
Press Mono Start or Colour Start.
You will dial ‘555-7000 ’.
To temporarily change a number, you can
substitute part of the number with manual
dialling using the dial pad. For example, to
change the number to 555-7001 you could
press
(Phone Book), choose Search,
press 03 and then press 7001 using the dial
pad.
Note
If you must wait for another dial tone or
signal at any point in the dialling
sequence, create a pause in the number
by pressing Redial/Pause. Each key
press adds a 3.5-second delay.
Dialling and storing numbers
Additional ways to
store numbers
Storing One Touch numbers
from Outgoing Calls
You can store One Touch numbers from the
Outgoing Call history.
a
b
Press Redial/Pause.
You can also choose Outgoing Call
by pressing
(FAX).
Storing One Touch numbers
from the Caller ID history
5
If you have the Caller ID subscriber service
from your telephone company you can also
store One Touch numbers from incoming
calls in the Caller ID History. (See Caller ID
(U.K. and Ireland only) in chapter 6 of the
Basic User’s Guide.)
a
b
Press
(FAX).
Press a or b to choose
Caller ID hist.
Press OK.
5
Press a or b to choose the name or
number you want to store.
Press OK.
c
c
Press a or b to choose
Add To Phone Book.
Press OK.
Press a or b to choose the number you
want to store.
Press OK.
d
d
Press a or b to choose
Add To Phone Book.
Press OK.
Press a or b to choose the One Touch
Dial number where you want to store the
number.
Press OK.
e
Press a or b to choose the 2-digit
One Touch location where you want to
store the number in.
Press OK.
Note
One Touch Dial numbers begin with (for
example, l 0 2).
e
Do one of the following:
5
5
Note
One Touch Dial numbers begin with
example, l 0 2).
f
 Enter the name using the dial pad
(up to 16 characters).
(for
Do one of the following:
 Enter the name (up to 16 characters)
using the dial pad.
Press OK.
Press OK.
(To help you enter letters, see
Entering Text in appendix C of the
Basic User’s Guide.)
(To help you enter letters, see
Entering Text in appendix C of the
Basic User’s Guide.)
 To store the number without a name,
press OK.
 To store the number without a name,
press OK.
f
Press OK to confirm the fax or
telephone number.
g
Press OK to confirm the fax or
telephone number.
g
Press a or b to choose Complete.
Press OK.
h
Press a or b to choose Complete.
Press OK.
h
Press Stop/Exit.
i
Press Stop/Exit.
25
Chapter 5
Storing Speed Dial numbers
from Outgoing Calls
You can also store Speed Dial numbers from
the Outgoing Call history.
a
Press Redial/Pause.
You can also choose Outgoing Call
by pressing
(FAX).
b
Press a or b to choose the name or
number you want to store.
Press OK.
c
Press a or b to choose
Add To Phone Book.
Press OK.
d
Press a or b to choose the 2-digit
Speed Dial location where you want to
store the number.
Press OK.
h
Press a or b to choose Complete.
Press OK.
i
Press Stop/Exit.
5
Storing Speed Dial numbers
from the Caller ID history
If you have the Caller ID subscriber service
from your telephone company you can also
store Speed Dial numbers from incoming
calls in the Caller ID History. (See Caller ID
(U.K. and Ireland only) in chapter 6 of the
Basic User’s Guide.)
a
Press Redial/Pause and press l.
You can also choose
Caller ID hist. by pressing
(FAX).
b
Press a or b to choose the number you
want to store.
Press OK.
c
Press a or b to choose
Add To Phone Book.
Press OK.
d
Press a or b to choose the 2-digit
Speed Dial location where you want to
store the number.
Press OK.
Note
Speed Dial numbers start with # (for
example, # 0 2).
e
Do one of the following:
 Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text in appendix C of the
Basic User’s Guide.)
 To store the number without a name,
press OK.
f
Press OK to confirm the fax or
telephone number.
g
Do one of the following:
 Enter a second fax or telephone
number (up to 20 digits).
Press OK.
 If you do not want to store a second
number, press OK.
26
Note
Speed Dial numbers start with # (for
example, # 0 2).
e
Do one of the following:
 Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text in appendix C of the
Basic User’s Guide.)
 To store the number without a name,
press OK.
5
Dialling and storing numbers
f
Press OK to confirm the fax or
telephone number.
g
Do one of the following:
d
 Enter a second fax or telephone
number (up to 20 digits).
Note
Speed Dial numbers start with #.
One Touch numbers start with l.
Press OK.
 If you do not want to store a second
number, press OK.
h
i
Press a or b to choose Complete.
Press OK.
e
Press a or b to choose Add Number.
Press OK.
f
To add numbers to the group, press
a or b to choose Alphabetic Order
or Numeric Order and OK. Press
a or b to select a number and OK.
Press Stop/Exit.
Setting up groups for
broadcasting
Press a or b to choose the two-digit One
Touch or Speed Dial location where you
want to store the Group.
Press OK.
g
Do one of the following:
5
 To add another number to the group,
repeat steps e to f.
Groups, which can be stored in a One Touch
or Speed Dial location, allow you to send the
same fax message to many fax numbers by
pressing only One Touch key or
 If you are finished adding numbers to
the group, press a or b to choose
Complete.
(Phone Book), Search, OK, the two-digit
location and Mono Start.
First, you'll need to store each fax number in
a One Touch or Speed Dial location. Then
you can include them as numbers in the
Group. Each Group uses up a One Touch or
Speed Dial location. You can have up to six
Groups, or you can assign up to 215 numbers
in a large Group.
(See Broadcasting (Monochrome only)
on page 10 and Storing Speed Dial numbers
in chapter 7 of the Basic User’s Guide.)
a
Press
b
Press a or b to choose Setup Groups.
Press OK.
c
Press a or b to choose GROUP1,
GROUP2, GROUP3, GROUP4, GROUP5 or
GROUP6 for the Group name where you
will store the fax numbers.
Press OK.
(Phone Book).
Press OK.
h
Do one of the following:
 To store another Group for
broadcasting, repeat steps c to g.
 To finish storing Groups for
broadcasting, press Stop/Exit.
Note
You can print a list of all the One Touch
and Speed Dial numbers. Group numbers
will be marked in the GROUP column.
(See Reports on page 30.)
27
5
Chapter 5
Changing a Group name
a
Press
b
5
Deleting a Group
5
a
Press
Press a or b to choose Setup Groups.
Press OK.
b
Press a or b to choose Setup Groups.
Press OK.
c
Press a or b to choose the Group name
you want to change.
Press OK.
c
Press a or b to choose the Group you
want to delete.
Press OK.
d
Press a or b to choose
Change Group Name.
Press OK.
d
Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
Note
e
Press Stop/Exit.
(Phone Book).
How to change the stored name or
number:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press Clear. Re-enter the character.
e
Enter the new name (up to
16 characters) using the dial pad.
Press OK.
(See Entering Text in appendix C of the
Basic User’s Guide. For example, type
NEW CLIENTS.)
f
Press a or b to choose Complete.
Press OK.
g
Press Stop/Exit.
28
(Phone Book).
Deleting a number from a Group
5
a
Press
b
Press a or b to choose Setup Groups.
Press OK.
c
Press a or b to choose the Group you
want to change.
Press OK.
d
Press a or b to choose the number you
want to delete.
Press OK.
Press 1 to confirm.
e
Press a or b to choose Complete.
Press OK.
f
Press Stop/Exit.
(Phone Book).
6
Printing reports
Fax reports
e
6
You need to set up the Transmission
Verification Report and Journal Period using
the Menu keys.
Transmission Verification
Report
You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or
24 hours, 2 or 7 days). If you set the interval
to Off, you can still print the report by
following the steps in How to print a report
on page 30. The factory setting is
Every 50 Faxes.
a
b
Press Menu.
The machine will print the report at
the chosen time and then erase all
jobs from its memory. If the
machine's memory is filled with the
maximum 200 jobs before the time
you chose has passed, the machine
will print the Journal early and then
erase all jobs from the memory. If
you want an extra report before it is
due to print, you can print it without
erasing the jobs from the memory.
6
 Every 50 Faxes
6
The machine will print the Journal
when the machine has stored
50 jobs.
f
Enter the time to start printing in 24-hour
format.
Press OK.
(For example: enter 19:45 for 7:45 PM.)
g
If you choose Every 7 Days,
press a or b to choose Day:, and then
press d or c to choose the first day for
the 7-day countdown.
h
Press Stop/Exit.
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Report Setting.
Press OK.
d
Press a or b to choose
Journal Period.
Press d or c to choose an interval.
Press OK.
If you choose Every 50 Faxes, go to
step h.
 6, 12, 24 hours, 2 or 7 days
You can use the Transmission Verification
Report as proof that you sent a fax. (For
details about how to set up the type of report
you want, see Transmission Verification
Report in chapter 4 of the Basic User's
Guide.)
Fax Journal (activity report)
6
29
6
Chapter 6
Reports
The following reports are available:
 XMIT Verify
Prints a Transmission Verification Report
for your last transmission.
 Help List
A help list showing how to program your
machine.
 Quick Dial
Lists names and numbers stored in the
One Touch and Speed Dial memory, in
alphabetical or numerical order.
 Fax Journal
Lists information about the last incoming
and outgoing faxes.
(TX: Transmit.) (RX: Receive.)
 User Settings
Lists your settings.
 Network Config
Lists your Network settings.
 WLAN Report
Prints a WLAN connection report.
 Caller ID hist.
Lists the available Caller ID information
about the last 30 received faxes and
telephone calls.
30
6
How to print a report
a
b
Press Menu.
Press a or b to choose
Print Reports.
Press OK.
c
Press a or b to choose the report you
want.
Press OK.
d
(Quick Dial only) Press a or b to choose
Alphabetic Order or
Numeric Order.
Press OK.
e
f
Press Mono Start.
Press Stop/Exit.
6
7
Making copies
Copy settings
7
You can change the copy settings temporarily
for multiple copies.
7
 Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
To change a setting, press COPY and then
press a or b to scroll through the copy
settings. When the setting you want is
highlighted, then press d or c to choose your
option, and press OK.
 Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.
When you are finished choosing settings,
press Mono Start or Colour Start.
7
 Best
Note
Use Best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
• You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
changes as a new default on page 41.)
• The Ink Save Mode,
Thin Paper Copy, Book Copy and
Watermark Copy features are
supported by technology from Reallusion,
Inc.
To stop copying, press Stop/Exit.
Changing copy speed and
quality
You can choose from a range of speed and
quality. The factory setting is Normal.
The machine returns to its default settings
after 1 minute, or if the Mode Timer returns
the machine to Fax mode. (See Mode Timer
on page 3.)
Stop copying
7
a
Press
b
c
d
e
Load your document.
7
f
(COPY).
Enter the number of copies you want.
Press a or b to choose Quality.
Press d or c to choose Fast, Normal or
Best.
Press OK.
If you do not want to change additional
settings, press Mono Start or
Colour Start.
31
Chapter 7
Enlarging or reducing the
copied image
198% 10x15cmiA4
7
186% 10x15cmiLTR
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
141% A4iA3, A5iA4
a
83% LGLiA4
b
c
d
e
f
Press
(COPY).
100%
97% LTRiA4
93% A4iLTR
69% A3iA4, A4iA5
Load your document.
47% A4i10x15cm
Enter the number of copies you want.
Fit to Page
Press a or b to choose
Enlarge/Reduce.
Press d or c to choose 100%, Enlarge,
Reduce, Fit to Page or
Custom(25-400%).
Do one of the following:
 If you chose Enlarge or Reduce,
press OK and press d or c to choose
the enlargement or reduction ratio
you want.
Press OK.
 If you chose Custom(25-400%),
press OK and then enter an
enlargement or reduction ratio from
25% to 400%.
Press OK.
 If you chose 100% or Fit to Page,
go to step g.
Custom(25-400%)
g
If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
• Page Layout is not available with
Enlarge/Reduce.
• Page Layout, Book Copy, Sort,
Thin Paper Copy and
Watermark Copy are not available with
Fit to Page.
• Fit to Page does not work correctly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper left
hand corner, with the document face down
on the scanner glass.
• Fit to Page is not available for a Legal
size document.
• When using A3 or Ledger size paper,
Duplex Copy is not available with
Enlarge/Reduce.
32
Making copies
Making N in 1 copies or a
poster (Page Layout)
7
d
e
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
The 1 to 2 feature copies one A3 or Ledger
size page onto two A4 or Letter size pages. If
you use this setting, use the scanner glass.
f
• (P) means Portrait and (L) means
Landscape.
 If you chose Poster(2 x 2),
press a or b to choose
Layout Format. Press d or c to
choose LGRx1 i LGRx4,
LTRx1 i LGRx4, A3x1 i A3x4 or
A4x1 i A3x4.
• You can only make one poster copy and 1
to 2 copy at a time.
• Poster copy is not available when using
transparencies.
g
Note
• Watermark Copy, Book Copy, Sort,
Thin Paper Copy, Ink Save Mode
and Enlarge/Reduce are not available
with Page Layout.
b
c
Load your document.
(COPY).
If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
If you placed the document in the ADF
or are making a poster, the machine
scans the document and starts printing.
If you are using the scanner glass, go
to step h.
• Skew Adjustment is not available with
Poster and 1 to 2 copy.
Press
Do one of the following:
 If you chose 2 in 1 (P) or
2 in 1 (L), press a or b to choose
Layout Format. Press d or c to
choose LGRx2 i LGRx1,
LTRx2 i LGRx1, A3x2 i A3x1 or
A4x2 i A3x1.
• If you are producing multiple colour
copies, N in 1 copy is not available.
a
For details about 2 in 1 (ID), see 2 in 1 ID Copy
on page 35.
If you chose 2 in 1 or
Poster(2 x 2)with A3 or Ledger, go
to step f to choose the paper size of
your document.
If you choose another setting, go to
step g.
• Make sure the paper size is set to A4, A3,
Letter or Ledger.
• Duplex Copy is not available with Poster
copy.
Press d or c to choose Off(1 in 1),
2 in 1 (P), 2 in 1 (L),
4 in 1 (P), 4 in 1 (L), 1 to 2,
Poster(2 x 1), Poster(2 x 2),
Poster(3 x 3) or 2 in 1 (ID) 1.
Press OK.
1
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
IMPORTANT
Press a or b to choose Page Layout.
h
After the machine scans the page,
press 1 to scan the next page.
i
Place the next page on the scanner
glass.
Press OK.
Enter the number of copies you want.
33
7
Chapter 7
j
Repeat steps h and i for each page of
the layout.
k
After all the pages have been scanned,
press 2 to finish.
If you are copying from the scanner glass,
place the document face down in the
direction shown below:
 2 in 1 (P)
Note
If you have chosen photo paper as the
Paper Type for N in 1 copies, the machine
will print the images as if plain paper had
been chosen.
If you are copying from the ADF, insert the
document face up in the direction shown
below:
 2 in 1 (L)
 4 in 1 (P)
 2 in 1 (P)
 4 in 1 (L)
 2 in 1 (L)
 1 to 2
 4 in 1 (P)
 Poster(2 x 1)
 4 in 1 (L)
34
Making copies
b
 Poster(2 x 2)
Place your identification card face down
at the left corner of the scanner glass.
 Poster(3 x 3)
1
1
2 in 1 ID Copy
You can copy both sides of your identification
card onto one page, keeping the original card
size. Make sure the paper size is set to A4 or
Letter.
You can copy an identification card to the
extent permitted under applicable laws.
See Unlawful use of copying equipment in
the Safety and Legal Booklet.
Press
c
d
e
Enter the number of copies you want.
f
Press Mono Start or Colour Start.
The machine starts scanning the first
page.
g
After the machine copies the one side,
press 1. Turn over the identification card
and press OK to scan the another side.
7
Press a or b to choose Page Layout.
Press d or c to choose 2 in 1 (ID).
Press OK.
Note
Note
a
3 mm or greater (top, left)
(COPY).
• Watermark Copy, Book Copy, Sort,
Duplex Copy, Thin Paper Copy,
Ink Save Mode and Enlarge/Reduce
are not available with 2 in 1 (ID).
• If you are producing multiple colour
copies, 2 in 1 (ID) copy is not available.
35
7
Chapter 7
Sorting copies using the ADF
7
You can sort multiple copies. Pages will be
stacked in the order 321, 321, 321, and so on.
Ink Save Mode
Ink Save Mode can help you save ink. The
machine prints the colours lighter and
emphasises the outlines of the images as
shown below:
a
Press
b
c
d
e
Load your document.
The amount of ink saved will vary depending
on the document.
Enter the number of copies you want.
Ink Save Mode: Off
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
(COPY).
7
7
Press a or b to choose Stack/Sort.
Press d or c to choose Sort.
Press OK.
Note
Fit to Page, Page Layout and
Book Copy are not available with Sort.
Adjusting Density
Ink Save Mode: On
7
You can adjust the copy density to make
copies darker or lighter.
a
Press
b
c
d
e
Load your document.
f
36
(COPY).
Enter the number of copies you want.
Press a or b to choose Density.
Press d or c to make a lighter or darker
copy.
Press OK.
If you do not want to change additional
settings, press Mono Start or
Colour Start.
a
Press
b
c
d
Load your document.
(COPY).
Enter the number of copies you want.
Press a or b to choose
Advanced Settings.
Press OK.
e
Press a or b to choose
Ink Save Mode.
f
Press OK.
7
Making copies
g
Skew Adjustment
If you do not want to change any
additional settings, press Mono Start or
Colour Start.
If your scanned copy is skewed, your
machine can correct the data automatically.
This setting is only available when using the
scanner glass.
Note
• Watermark Copy, Book Copy,
Skew Adjustment,
Thin Paper Copy and Page Layout
are not available with Ink Save Mode.
• Ink Save Mode may make your
printouts look different from your original
document.
Thin Paper Copy
If your document is a duplex copy on thin
paper, choose Thin Paper Copy so the
print on the other side does not bleed
through.
a
Press
b
c
d
Load your document.
e
f
7
a
Press
b
c
d
Load your document.
(COPY).
Enter the number of copies you want.
Press a or b to choose
Skew Adjustment.
7
e
Press d or c to choose Auto (or Off).
Press OK.
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
(COPY).
Enter the number of copies you want.
Press a or b to choose
Advanced Settings.
Press OK.
Press a or b to choose
Thin Paper Copy.
Press OK.
Press Mono Start or Colour Start.
Note
Fit to Page, Page Layout,
Skew Adjustment, Ink Save Mode,
Book Copy and Watermark Copy are
not available with Thin Paper Copy.
Note
• 1 to 2, Poster, Ink Save Mode,
Thin Paper Copy, Book Copy and
Watermark Copy are not available with
Skew Adjustment.
• You cannot use this setting with Ledger,
A3 or paper smaller than 64 mm  91 mm.
• This setting is only available for paper that
is rectangular or square.
• Skew Adjustment is only available if the
document is skewed by less than 3
degrees.
• Skew Adjustment may not work
correctly if your document is too thick.
37
7
Chapter 7
Book Copy
7
Book copy corrects dark borders and skew
when copying from the scanner glass. Your
machine can correct the data automatically or
you can make specific corrections.
a
Press
b
c
d
Load your document.
e
f
g
Enter the number of copies you want.
Press a or b to choose
Advanced Settings.
Press OK.
Press a or b to choose Book Copy.
Press OK.
If you have finished making corrections,
press Mono Start or Colour Start.
Page Layout, Sort, Duplex Copy,
Skew Adjustment, Ink Save Mode,
Fit to Page, Thin Paper Copy and
Watermark Copy are not available with
Book Copy.
7
You can place a logo or text into your
document as a Watermark. You can select
one of the template watermarks, data from
your media cards or USB Flash memory
drive, or scanned data.
(COPY).
Note
38
Watermark Copy
Note
Fit to Page, Page Layout,
Thin Paper Copy,
Skew Adjustment, Ink Save Mode
and Book Copy are not available with
Watermark Copy.
Using a template
7
a
Press
b
c
d
Load your document.
(COPY).
Enter the number of copies you want.
Press a or b to choose
Advanced Settings.
Press OK.
e
Press a or b to choose
Watermark Copy.
Press OK.
f
Press a or b to choose Template.
Press OK.
g
Change the settings from the options
displayed on the LCD if required.
h
If you do not want to change additional
settings, press Mono Start or
Colour Start.
Making copies
Using a media cards or USB Flash
memory drive data
a
Press
b
c
d
Load your document.
e
f
7
Using a scanned paper document as
your watermark
a
Press
Enter the number of copies you want.
Enter the number of copies you want.
b
c
Press a or b to choose
Advanced Settings.
Press OK.
d
Press a or b to choose
Watermark Copy.
Press OK.
Press a or b to choose
Watermark Copy.
Press OK.
e
Press a or b to choose Scan. Press OK,
and place the page that you want to use
as a watermark on the scanner glass.
f
g
Press Mono Start or Colour Start.
(COPY).
Insert a media card or USB Flash
memory drive. Press a or b to choose
Media.
(COPY).
Press a or b to choose
Advanced Settings.
Press OK.
7
g
Press OK and then press d or c to
choose the data you want to use for the
watermark.
h
Press OK and change any additional
settings from the options shown on the
LCD.
h
Press d or c to change the
Transparency of the watermark.
Press OK.
i
If you do not want to change additional
settings, press Mono Start or
Colour Start.
i
If you do not want to change any
additional settings, press Mono Start or
Colour Start.
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while
PHOTO CAPTURE is blinking to avoid
damaging the card, USB Flash memory
drive, or the data stored on them.
7
Take out the watermark document you
scanned and load the document you
want to copy.
Note
You cannot enlarge or reduce the
scanned watermark.
39
Chapter 7
a
Press Duplex Copy on the machine’s
panel.
You can reduce the amount of paper used for
copies by copying on both sides of the paper.
b
We recommend you load your document in
the ADF for duplex copying. For 2-sided
documents and books use the scanner glass.
Press d or c to choose On to turn on the
duplex settings.
c
Press a or b to choose Flip Type.
Press OK.
(long edge flip)
d
Press a or b to choose
LongEdge Flip(P),
LongEdge Flip(L),
ShortEdge Flip(P) or
ShortEdge Flip(L).
Press OK.
e
Do one of the following:
Duplex (2-sided) copying
7
Portrait
1
1
2
2
Landscape
 If you are copying A3 or Ledger size
paper, go to step f.
11
 If you are copying A4, A5, Letter or
Legal size paper, go to step h.
1
2
2
f
(short edge flip)
Portrait
Note
1
N in 1 copy is not available with
A3/LGR DX Setting.
1
2
2
g
Landscape
11
1
2
2
Note
• 2 in 1 (ID), Poster, Book Copy
and Fit to Page are not available with
Duplex Copy.
• You can only use plain paper sizes A4,
A5, A3, Letter, Legal or Ledger.
• When using A3 or Ledger size paper,
Enlarge/Reduce is not available with
Duplex Copy.
• (P) means Portrait and (L) means
Landscape.
40
Press a or b to choose
A3/LGR DX Setting.
Press OK.
Press a or b to choose Fit to Page
or Keep Scale.
Press OK.
Note
If you choose Fit to Page, your
machine will reduce the document size
automatically to fit the printable area.
If you choose Keep Scale, your
machine will not change the document
size. The top and bottom might be cut off
depending on the document size.
h
Press a or b to choose Exit.
Press OK.
i
Load your document.
Press OK.
Making copies
j
k
l
Enter the number of copies you want.
Press Mono Start or Colour Start.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go to
step l.
Do one of the following:
 Place the next page on the scanner
glass.
Press 1. Go to step m.
 After all the pages have been
scanned, press 2.
m
Setting your changes as a
new default
You can save the copy settings for Quality,
Tray Select (MFC-J6710DW),
Enlarge/Reduce, Density,
Page Layout, Skew Adjustment,
Ink Save Mode, Thin Paper Copy and
Duplex Copy that you use most often by
setting them as the default settings. These
settings will stay until you change them again.
a
Press
b
Press a or b and d or c to choose your
new setting.
Press OK.
Repeat this step for each setting you
want to change.
Press OK.
The machine starts scanning and
printing the document.
DO NOT touch printed pages until they are
ejected the second time. The machine will
print and eject the first side, and then pull the
paper back in to print the second side.
Note
• If your document causes paper jams, try
using one of the special duplex copy
settings. Press a or b to choose
Advanced and then press OK after
step e. Press a or b to choose DX1 or
DX2.
DX1 helps avoid paper jams when copying
by allowing more time for the ink to dry.
DX2 allows more time for the ink to dry
while also using less ink.
• DX1 is not available for A3 or Ledger size
paper.
7
(COPY).
c
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d
e
Press 1 to choose Yes.
7
Press Stop/Exit.
Restoring all settings to the
factory settings
7
You can restore the copy settings
Quality, Tray Select (MFC-J6710DW),
Enlarge/Reduce, Density,
Page Layout, Skew Adjustment,
Ink Save Mode, Thin Paper Copy and
Duplex Copy, that you have changed, to
the factory settings.
a
Press
b
Press a or b to choose
Factory Reset.
Press OK.
c
d
Press 1 to choose Yes.
(COPY).
Press Stop/Exit.
41
8
Printing photos from a memory
card or USB Flash memory drive
PhotoCapture Center™
operations
Memory cards,
USB Flash memory drive and
folder structures
8
Please be aware of the following:
8
 (memory card users)
8
Your machine is designed to be compatible
with modern digital camera image files,
memory cards and USB Flash memory
drives; however, please read the points
below to avoid errors:
 The image file extension must be .JPG
(other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
 Direct PhotoCapture Center™ printing
must be performed separately from
PhotoCapture Center™ operations using
the PC. (Simultaneous operation is not
available.)
 The machine can read up to 999 files on a
memory card or USB Flash memory drive.
 The DPOF file on the memory cards must
be in a valid DPOF format. (See DPOF
printing on page 50.)
42
 When printing an index or image, the
PhotoCapture Center™ will print all the
valid images, even if one or more images
have been corrupted. Corrupted images
will not be printed.
Your machine is designed to read memory
cards that have been formatted by a digital
camera.
When a digital camera formats a memory
card it creates a special folder into which it
copies image data. If you need to modify
the image data stored on a memory card
with your PC, we recommend that you do
not modify the folder structure created by
the digital camera. When saving new or
modified image files to the memory card
we also recommend you use the same
folder your digital camera uses. If the data
is not saved to the same folder, the
machine may not be able to read the file or
print the image.
 (USB Flash memory drive users)
This machine supports USB Flash
memory drives that have been formatted
by Windows®.
Printing photos from a memory card or USB Flash memory drive
Movie printing
You can print images from movie files that are
stored on a memory card or USB Flash
memory drive.
Movie files are automatically split by duration
into 9 parts, and placed in 3 rows so you can
see and print the scenes.
8
Print Images
8
Print Index (Thumbnails)
8
The PhotoCapture Center™ assigns
numbers for images (such as No.1, No.2,
No.3, and so on).
Note
• You cannot choose a particular movie
scene.
• You can use AVI or MOV movie file
formats (Motion JPEG only). However, if
an AVI file size is 1 GB or more (the
shooting time is about 30 minutes) or a
MOV file size is 2 GB or more (the
shooting time is about 60 minutes), these
files cannot be printed.
The PhotoCapture Center™ uses these
numbers to identify each picture. You can
print a thumbnail page to show all the pictures
on the memory card or USB Flash memory
drive.
8
Note
Only file names that are 8 characters or
less will be printed correctly on the index
sheet.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose Print Index.
Press OK.
43
Chapter 8
c
Press a or b to choose
Layout Format. Press d or c to
choose 6 Images/Line or
5 Images/Line.
Press OK.
6 Images/Line
5 Images/Line
Print time for 5 Images/Line will be
slower than 6 Images/Line, but the
quality is better.
d
Do one of the following:
 Press a or b to choose
Paper Type, and press d or c to
choose the type of paper you are
using, Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61 or Other Glossy.
Printing Photos
Before you can print an individual image, you
have to know the image number.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Print the Index. (See Print Index
(Thumbnails) on page 43.)
c
Press a or b to choose Print Photos.
Press OK.
d
Enter the image number that you want to
print, from the thumbnails printed on the
Index page.
Press OK.
e
Repeat step d until you have entered
the image numbers that you want to
print.
Press OK.
 Press a or b to choose Paper Size
and press d or c to choose the paper
size you are using, A4 or Letter.
Press OK.
 If you do not want to change the
paper settings, go to step e.
e
Press Colour Start to print.
8
Note
• You can enter the numbers at one time by
using the l key for a comma or the # key
for a hyphen. For example, Enter 1, l, 3,
l, 6 to print images No.1, No.3 and No.6.
Enter 1, #, 5 to print images No.1 to No.5.
• You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
f
After you have chosen the image
numbers, press OK again.
g
Enter the number of copies you want
using the dial pad.
h
Do one of the following:
 Change the print settings. (See
PhotoCapture Center™ print
settings on page 51.)
 If you do not want to change any
settings, press Colour Start to print.
44
Printing photos from a memory card or USB Flash memory drive
Print All Photos
8
You can print all the photos on your memory
card or USB Flash memory drive.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose
Print All Photos.
Press OK.
c
Enter the number of copies you want
using the dial pad.
d
Do one of the following:
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Auto Correct.
Press OK.
Note
• If Remove Red-Eye appears on the LCD,
press # to attempt to remove red-eye from
your photo.
• Press Clear to undo the effect.
 Change the print settings. (See
PhotoCapture Center™ print
settings on page 51.)
e
Press OK and enter the number of
copies you want using the dial pad.
f
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
 If you do not want to change any
settings, press Colour Start to print.
Enhance Photos
 If you do not want to change any
settings, press Colour Start to print.
8
You can edit and add effects to your photos
and view them on the LCD before printing.
Enhance Skin-Tone
• After adding each effect, you can enlarge
the view of the image by pressing l. To go
back to the original size, press l again.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Enhance Skin.
Press OK.
• The Enhance Photos feature is
supported by technology from Reallusion,
Inc.
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
8
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
colour in your photos and adjusts the image.
Note
Auto Correct
8
8
45
Chapter 8
e
Do one of the following:
 Press OK if you do not want to
change any settings.
f
Enter the number of copies you want
using the dial pad.
g
Do one of the following:
 Press a or b to adjust the effect level
manually.
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
Press OK when you have finished.
f
Enter the number of copies you want
using the dial pad.
g
Do one of the following:
 If you do not want to change any
settings, press Colour Start to print.
Remove Red-Eye
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
The machine detects eyes in your photos and
will attempt to remove red-eye from your
photo.
 If you do not want to change any
settings, press Colour Start to print.
Enhance Scenery
Enhance Scenery is best used for adjusting
landscape photographs. It highlights green
and blue areas in your photo, so that the
landscape looks more sharp and vivid.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Enhance Scenery.
Press OK.
e
Do one of the following:
 Press OK if you do not want to
change any settings.
 Press a or b to adjust the effect level
manually.
Press OK when you have finished.
46
8
Note
There are some cases when red-eye may
not be removed.
8
• When the face is too small in the image.
• When the face is turning too far up,
down, left or right.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Remove Red-Eye.
Press OK.
 When Remove Red-Eye is
successful, the photo with the effect
is shown. The adjusted part is shown
in a red frame.
 When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Press OK to go back to the previous
level.
Printing photos from a memory card or USB Flash memory drive
Fill Light
Note
Fill Light is best used for adjusting
photographs against the light.
Press # to try Remove Red-Eye once
again.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
b
Press a or b to choose
Enhance Photos.
Press OK.
 If you do not want to change any
settings, press Colour Start to print.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Fill Light.
Press OK.
e
Press OK and enter the number of
copies you want using the dial pad.
f
Do one of the following:
Night Scene
8
Night Scene is best used for adjusting night
view photographs to make them more vivid.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
b
(PHOTO CAPTURE).
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Night Scene.
Press OK.
Note
You can also adjust the effect level
manually, by pressing a or b.
e
f
8
Press OK and enter the number of
copies you want using the dial pad.
Note
You can also adjust the effect level
manually, by pressing a or b.
e
Press OK and enter the number of
copies you want using the dial pad.
f
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
 If you do not want to change any
settings, press Colour Start to print.
Whiteboard
 If you do not want to change any
settings, press Colour Start to print.
8
Whiteboard is best used for adjusting
photographs. It detects letters on a
whiteboard in your photo and makes them
more legible.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
8
47
Chapter 8
c
d
Sepia
Press d or c to choose your photo.
Press OK.
You can convert the colour of your photo to
sepia.
Press a or b to choose Whiteboard.
Press OK.
e
Press OK and enter the number of
copies you want using the dial pad.
f
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
 If you do not want to change any
settings, press Colour Start to print.
Monochrome
b
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Monochrome.
Press OK.
e
Press OK and enter the number of
copies you want using the dial pad.
f
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
 If you do not want to change any
settings, press Colour Start to print.
48
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose Sepia.
Press OK.
e
Press OK. Then enter the number of
copies you want using the dial pad.
f
Do one of the following:
8
You can convert your photo to monochrome.
a
8
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
 If you do not want to change any
settings, press Colour Start to print.
Printing photos from a memory card or USB Flash memory drive
Search by Date
8
You can find your photos based on date.
a
b
c
d
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
Press a or b to choose
Search by Date.
Press OK.
Press a or b to choose the date that you
want to search from.
Press OK.
Press d or c to choose your photo.
Note
You can view photos with other dates by
pressing d or c continuously. Press d to
view an older photo and c to view a more
recent photo.
Slide Show
8
You can view all your photos on the LCD
using Slide Show. You can also choose a
photo during the operation.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose Slide Show.
Press OK.
c
Press Stop/Exit to finish Slide Show.
Printing a photo during a Slide Show
a
8
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose Slide Show.
Press OK.
e
Enter the number of copies you want
using the dial pad.
c
f
Press OK to stop at one image while
Slide Show is operating.
Repeat steps d and e until you have
chosen all your photos.
d
g
Enter the number of copies you want
using the dial pad.
After you have chosen all your photos,
do one of the following:
e
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
 If you do not want to change any
settings, press Colour Start to print.
 If you do not want to change any
settings, press Colour Start to print.
49
8
Chapter 8
Trimming
8
You can trim your photo and print a part of the
image.
Note
If your photo is very small or has irregular
proportions you may not be able to trim
the photo. The LCD will show
Image Too Small. or
Image Too Long.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
(PHOTO CAPTURE).
b
Press a or b to choose Trimming.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Adjust the red frame around your photo.
The part inside of the red frame will be
printed.
 Press l or # to enlarge or reduce the
frame size.
 Press each arrow key to move the
position of the frame.
 Press 0 to rotate the frame.
 Press OK when you have finished
adjusting the frame setting.
e
Enter the number of copies you want
using the dial pad.
f
Do one of the following:
 Press OK and change the print
settings. (See PhotoCapture
Center™ print settings on page 51.)
 If you do not want to change any
settings, press Colour Start to print.
50
DPOF printing
8
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, FUJIFILM
Corporation, Panasonic Corporation and
Sony Corporation) created this standard to
make it easier to print images from a digital
camera.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
When a memory card containing DPOF
information is put into your machine, you can
print the chosen image easily.
a
Make sure you have put the memory
card in the correct slot.
Press
(PHOTO CAPTURE).
The machine will ask you if you want to
use DPOF settings.
b
c
Press 1 to choose Yes.
Do one of the following:
 Change the print settings. (See
PhotoCapture Center™ print
settings on page 51.)
 If you do not want to change any
settings, press Colour Start to print.
Note
A DPOF File error can occur if the print
order that was created on the camera has
been corrupted. Delete and recreate the
print order using your camera to correct
this problem. For instructions on how to
delete or recreate the print order, refer to
your camera manufacturer's support
website or accompanying documentation.
Printing photos from a memory card or USB Flash memory drive
PhotoCapture Center™
print settings
Paper options
8
Paper Type
You can change the print settings
temporarily.
a
b
The machine returns to its default settings
after 3 minutes, or if the Mode Timer returns
the machine to Fax mode. (See Mode Timer
on page 3.)
Note
c
You can save the print settings you use
most often by setting them as the default.
(See Setting your changes as a new
default on page 54.)
Print Setting
1
8
Press a or b to choose Paper Type.
Press d or c to choose the paper type
you are using, Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61 or Other Glossy.
Press OK.
If you do not want to change additional
settings, press Colour Start to print.
Paper and print size
a
b
Press Start
0001
Print Quality
Paper Type
Paper Size
1
Print
8
Photo
Other Glossy
10x15cm
c
No. of prints
(For View Photo(s), Search by Date, Slide
Show)
You can see the total number of photos that will
be printed.
8
Press a or b to choose Paper Size.
Press d or c to choose the paper size
you are using, 10x15cm, 13x18cm, A4,
A3, Letter or Ledger.
Press OK.
If you chose A4 or Letter, press b.
Then press d or c to choose the Print
Size.
Press OK.
Example: Printed position for A4 paper
1
(For Print All Photos, Print Photos, Enhance
Photos, Trimming)
You can see the number of copies of each
photo that will be printed.
2
8 x 10cm
3
9 x 13cm
10 x 15cm
(For DPOF printing) This does not appear.
Print Quality
a
Press a or b to choose
Print Quality.
b
Press d or c to choose Normal or
Photo.
Press OK.
c
If you do not want to change additional
settings, press Colour Start to print.
8
4
5
6
13 x 18cm
15 x 20cm
Max. Size
d
If you do not want to change additional
settings, press Colour Start to print.
51
8
Chapter 8
Adjusting Brightness,
Contrast and Colour
Brightness
a
b
c
Press d or c to adjust the degree of the
setting.
Press OK.
e
Do one of the following:
8
Press d or c to make a darker or lighter
print.
Press OK.
 If you want to customize another
colour enhancement, press a or b to
choose another option.
If you do not want to change additional
settings, press Colour Start to print.
 If you want to change other settings,
press a or b to choose Exit, and
then press OK.
8
If you do not want to change additional
settings, press Colour Start to print.
a
Press a or b to choose
Color Enhance.
Press OK.
b
Do one of the following:
 If you want to customize the
White Balance, Sharpness or
Color Density, press d or c to
choose On, and then go to step c.
 If you do not want to customize,
press d or c to choose Off.
Press OK and then go to step f.
If you do not want to change additional
settings, press Colour Start to print.
• White Balance
Press d or c to change the contrast.
Press OK.
You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower.
f
Note
Press a or b to choose Contrast.
Colour Enhancement
52
d
8
You can choose the contrast setting.
Increasing the contrast will make an image
look sharper and more vivid.
c
Press a or b to choose
White Balance, Sharpness or
Color Density.
Press a or b to choose Brightness.
Contrast
a
b
c
8
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will affect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other colour. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Colour Density
This setting adjusts the total amount of
colour in the image. You can increase or
decrease the amount of colour in an
image to improve a washed out or weak
picture.
Printing photos from a memory card or USB Flash memory drive
Cropping
8
Borderless printing
8
If your photo is too long or wide to fit the
available space on your chosen layout, part
of the image will automatically be cropped.
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
The factory setting is On. If you want to print
the whole image, turn this setting to Off.
When you set Cropping to Off, also set
Borderless to Off. (See Borderless
printing on page 53.)
a
b
a
b
c
c
Press a or b to choose Cropping.
Press d or c to choose Off (or On).
Press OK.
Cropping: Off
Press d or c to choose Off (or On).
Press OK.
If you do not want to change additional
settings, press Colour Start to print.
Date Print
If you do not want to change additional
settings, press Colour Start to print.
Cropping: On
Press a or b to choose Borderless.
8
8
8
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn’t
have the date information, you cannot use
this function.
a
b
Press a or b to choose Date Print.
c
If you do not want to change additional
settings, press Colour Start to print.
8
Press d or c to choose On (or Off).
Press OK.
Note
The DPOF setting on your camera must
be turned off to use the Date Print
feature.
53
Chapter 8
Setting your changes as a
new default
8
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press a or b and d or c to choose your
new setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
c
d
Glass Scan Size
To scan a Letter, Legal, Ledger, or A3 size
document, you need to change the
Glass ScanSize setting. The default
setting is A4.
a
Press
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose
Glass ScanSize.
d
Press d or c to choose A4, A3, Letter,
Legal or Ledger.
Press OK.
Press 1 to choose Yes.
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore the PhotoCapture settings
Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
Color Enhance, Cropping, Borderless
and Date Print, that you have changed, to
the factory settings.
a
Press a or b to choose
Factory Reset.
Press OK.
b
c
Press 1 to choose Yes.
54
Scan to a memory card
or USB Flash memory
drive
Press Stop/Exit.
8
(SCAN).
Note
• You can save the setting you use most
often by setting it as the default. (See
Setting your changes as a new default
on page 54.)
• This setting is only available for scanning
documents from the scanner glass.
8
8
Printing photos from a memory card or USB Flash memory drive
Auto Crop
8
You can scan multiple documents placed on
the scanner glass. An individual document
can be previewed on the LCD before you
save it. When you choose Auto Crop, the
machine will scan each document and create
separate files. For example, if you place three
documents on the scanner glass, the
machine will scan and create three separate
files. If you want to create a three page file,
choose PDF or TIFF for File Type.
(If you choose JPEG, each document is
created as three separate files.)
1
3 2 1
1
3
2
2
1
10 mm or greater (top, left, right)
2
20 mm or greater (bottom)
Note
• Auto Crop works correctly for all
Glass ScanSize settings.
• Auto Crop is supported by technology
from Reallusion, Inc.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
b
Load your document.
c
Press
d
Press a or b to choose
Scan to Media.
Press OK.
e
f
Press a or b to choose Auto Crop.
g
If you do not want to change additional
settings, press Mono Start or
Colour Start to start scanning.
h
The number of the scanned documents
appears on the LCD.
Press OK.
i
Press d or c to preview each document
data.
j
Press OK to save the data.
Press d or c to choose On.
Press OK.
Note
• Auto Crop is available for paper that has
all four corners with right angles of 90
degrees. If one of the angles is not square,
Auto Crop cannot detect the document.
• If your document is too long or wide, this
setting does not work correctly.
• You must place the documents away from
the edges of the scanner glass as shown
in the illustration.
• You must place the documents at least
10 mm apart from each other.
• Auto Crop adjusts the skew of the
document on the scanner glass, but if your
document is skewed more than
10 degrees, this setting will not work.
• The ADF must be empty to use the
Auto Crop.
• The Auto Crop feature is available for up
to a maximum of 16 documents
depending on the size of your documents.
(SCAN).
55
8
Chapter 8
How to reset to factory
settings
IMPORTANT
DO NOT take out the memory card or
USB Flash memory drive while
PHOTO CAPTURE is blinking to avoid
damaging the card, USB Flash memory
drive or the data stored on them.
How to set a new default
You can restore all the Scan to Media settings
(Quality, File Type, Glass ScanSize
and Auto Crop), that you have changed, to
the factory settings.
8
You can save the Scan to Media settings
(Quality, File Type, Glass ScanSize
and Auto Crop) you use most often by
setting them as the default settings. These
settings will stay until you change them again.
a
Press
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose
Set New Default. Press OK and 1 to
choose Yes.
d
Press Stop/Exit.
56
(SCAN).
a
Press
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose
Factory Reset. Press OK and 1 to
choose Yes.
d
Press Stop/Exit.
(SCAN).
8
9
Printing photos from a camera
Printing photos
directly from a
PictBridge camera
9
Setting your digital camera
9
9
Make sure your camera is in PictBridge
mode. The following PictBridge settings may
be available from the LCD of your PictBridge
compatible camera.
Depending on your camera some of these
settings may not be available.
Camera Menu
Selections
Options
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
Paper Size
A4, A3, Ledger, Letter,
10  15 cm,
Printer Settings
If your camera is using the USB Mass
Storage standard, you can also print photos
from a digital camera without PictBridge.
(See Printing photos directly from a digital
camera (without PictBridge) on page 59.)
Paper Type
PictBridge requirements
(Default setting) 2
(Default setting) 2
Layout
Borderless: On,
Borderless: Off,
Printer Settings
9
(Default setting) 2
9
To avoid errors, remember the following
points:
DPOF setting 1
-
Print Quality
Normal, Fine,
Printer Settings
(Default setting) 2
 The machine and the digital camera must
be connected using a suitable USB cable.
Colour
Enhancement
 The image file extension must be .JPG
(other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
 PhotoCapture Center™ operations are
not available when using the PictBridge
feature.
Plain Paper, Glossy Paper,
Inkjet Paper, Printer Settings
On, Off,
Printer Settings
(Default setting) 2
Date Print
On, Off,
Printer Settings
(Default setting) 2
1
See DPOF printing on page 58 for more details.
2
If your camera is set to use the Printer Settings
(Default setting), the machine will print your photo
using the following settings.
57
Chapter 9
Settings
Options
Paper Size
10  15 cm
Paper Type
Glossy Paper
Layout
Borderless: On
Print Quality
Fine
Colour Enhancement
Off
Date Print
Off
 When your camera does not have any
menu selections, these settings are also
used.
Remove any memory cards or USB Flash
memory drive from the machine before
connecting a digital camera.
a
Make sure that your camera is turned
off. Connect your camera to the USB
direct interface (1) on the machine using
the USB cable.
c
Choose the photo you want to print
following the instructions from your
camera.
When the machine starts printing a
photo, the LCD will show Printing.
To prevent damage to your machine, do
not connect any device other than a digital
camera or USB Flash memory drive to the
USB direct interface.
Please refer to the documentation supplied
with your camera for more detailed
information on changing PictBridge settings.
Note
Turn on the camera.
When the machine has recognized the
camera, the LCD shows
Camera Connected.
IMPORTANT
 The names and availability of each setting
depends on the specification of your
camera.
Printing Images
b
DPOF printing
9
9
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, FUJIFILM
Corporation, Panasonic Corporation and
Sony Corporation) created this standard to
make it easier to print images from a digital
camera.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
Note
A DPOF File error can occur if the print
order that was created on the camera has
been corrupted. Delete and recreate the
print order using your camera to correct
this problem. For instructions on how to
delete or recreate the print order, refer to
your camera manufacturer's support
website or accompanying documentation.
1
1
58
USB direct interface
Printing photos from a camera
Printing photos
directly from a digital
camera
(without PictBridge)
If your camera supports the USB Mass
Storage standard, you can connect your
camera in storage mode. This enables you to
print photos from your camera.
Printing Images
9
Note
9
Remove any memory cards or USB Flash
memory drive from the machine before
connecting a digital camera.
a
(If you would like to print photos in PictBridge
mode, see Printing photos directly from a
PictBridge camera on page 57.)
Make sure that your camera is turned
off. Connect your camera to the USB
direct interface (1) on the machine using
the USB cable.
Note
The name, availability and operation differ
among digital cameras. Please refer to the
documentation supplied with your camera
for detailed information, such as how to
switch from PictBridge mode to USB mass
storage mode.
1
9
1
b
c
USB direct interface
Turn on the camera.
Follow the steps in Print Images
on page 43.
IMPORTANT
To prevent damage to your machine, do
not connect any device other than a digital
camera or USB Flash memory drive to the
USB direct interface.
59
A
Routine maintenance
Cleaning and checking
the machine
Cleaning the outside of the
machine
b
Wipe the outside of the machine with a
dry, lint-free soft cloth to remove dust.
c
Lift the output paper tray cover and
remove anything that is stuck inside the
paper tray.
d
Wipe the paper tray with a dry, lint-free
soft cloth to remove dust.
e
Close the output paper tray cover and
put the output paper tray firmly back in
the machine.
A
A
IMPORTANT
• Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
will damage the outside surface of the
machine.
• DO NOT use cleaning materials that
contain ammonia.
• DO NOT use isopropyl alcohol to remove
dirt from the control panel. It may crack the
panel.
Clean the outside of the machine as
follows:
a
A
Pull the paper trays (1) completely out of
the machine.
1
1
60
A
Routine maintenance
Cleaning the machine’s
printer platen
A
Cleaning the paper feed
rollers
A
If the paper feed rollers are stained with ink, it
may cause paper feed problems.
CAUTION
Be sure to unplug the machine from the
electrical socket before cleaning the printer
platen.
a
Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover into the open position.
b
Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a dry, soft lint-free
cloth.
a
Unplug the machine from the electrical
socket. Pull the paper tray completely
out of the machine.
Note
If the paper support flap is open, close it,
and then close the paper support.
b
2
Clean the front side of the Paper Feed
Rollers (1) with a soft lint-free cloth
moistened with water, using a
side-to-side motion.
After cleaning, wipe the rollers with a
dry, lint-free soft cloth to remove all
moisture.
1
1
3
IMPORTANT
DO NOT touch the plate (2) and lever (3).
Doing this may cause damage to the
machine.
61
A
c
Lift the Jam Clear flap (2), and then
clean the back side of the Paper Feed
Rollers (1) with a soft lint-free cloth
moistened with water.
After cleaning, wipe the rollers with a
dry, lint-free soft cloth to remove all
moisture.
Cleaning the paper pick-up
rollers
a
Unplug the machine from the electrical
socket.
b
Pull the paper tray completely out of the
machine.
2
Note
1
If the machine starts multiple-feeding the
last few sheets of paper in the tray, clean
the Base Pad (1) with a soft lint-free cloth
moistened with water.
After cleaning, wipe the pad with a dry,
lint-free soft cloth to remove all moisture.
1
d
Put the paper tray firmly back in the
machine.
e
Re-connect the power cord.
Note
Do not use the machine again until the
rollers are dry. Using the machine before
the rollers are dry may cause paper feed
problems.
62
A
Routine maintenance
c
Open the Jam Clear Cover (1) at the
back of the machine.
e
Clean the Back Paper Feed Rollers (1)
with a soft lint-free cloth moistened with
water.
Slowly turn the rollers so that the whole
surface is cleaned.
After cleaning, wipe the rollers with a
dry, lint-free soft cloth to remove all
moisture.
1
d
1
Clean the Paper Pick-up Rollers (1) with
a soft lint-free cloth moistened with
water.
Slowly turn the rollers so that the whole
surface is cleaned.
After cleaning, wipe the rollers with a
dry, lint-free soft cloth to remove all
moisture.
Note
1
Do not touch the metal shaft.
f
Close the Jam Clear Cover.
Make sure the cover is closed
completely.
g
Put the paper tray firmly back in the
machine.
h
Re-connect the power cord.
A
63
Cleaning the paper pick- up
rollers for paper tray #2
(MFC-J6710DW only)
a
Unplug the machine from the electrical
socket. Pull tray #2 completely out of the
machine.
Note
Checking the ink volume
A
Although an ink volume icon appears on the
LCD, you can use the Menu key to see a
large graph showing the ink that is left in each
cartridge.
a
b
If the paper support flap is open, close it,
and then close the paper support.
b
Clean the paper pick-up rollers for
tray #2 (1) with a soft lint-free cloth
moistened with water.
Slowly turn the rollers so that the whole
surface is cleaned.
After cleaning, wipe the rollers with a
dry, lint-free soft cloth to remove all
moisture.
1
c
d
64
Put tray #2 firmly back in the machine.
Re-connect the power cord.
Press Menu.
Press a or b to choose
Ink Management.
Press OK.
c
Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
d
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows® or
Printing and Faxing for Macintosh in the
Software User’s Guide.)
A
Routine maintenance
Packing and shipping
the machine
e
Gently close the scanner cover using
the finger holds on each side.
A
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
correctly pack your machine. Damage
caused to your machine during transit may
not be covered by your warranty.
IMPORTANT
It is important to allow the machine to
“park” the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noise has stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a
Unplug the machine from the telephone
wall socket and take the telephone line
cord out of the machine.
b
Unplug the machine from the electrical
socket.
c
d
Using both hands, use the finger holds
on each side of the machine to lift the
scanner cover into the open position.
Then unplug the interface cable from the
machine, if it is connected.
Remove the orange protective part from
the inside right corner of the machine.
WARNING
Be careful not to trap your fingers under the
scanner cover.
Always use the finger holds provided on
each side of the scanner cover when
opening and closing it.
f
g
Open the ink cartridge cover.
h
Install the orange protective part and
then close the ink cartridge cover.
Remove all four ink cartridges. Press
the ink release lever above each
cartridge to release it. (See Replacing
the ink cartridges in appendix A of the
Basic User’s Guide.)
65
A
IMPORTANT
i
Wrap the machine in the bag.
j
Pack the machine and the printed
materials in the original carton with the
original packing material as shown
below. Do not pack the used ink
cartridges in the carton.
• Make sure the plastic tab on the right side
of the orange protective part (1) clicks
securely into place (2).
1
2
• If you are not able to find the orange
protective part, DO NOT remove the ink
cartridges before shipping. It is essential
that the machine be shipped with either
the orange protective part or the ink
cartridges in position. Shipping without
them will cause damage to your machine
and may void your warranty.
9
D
D
C
10
8
3
6
C
7
1
4
2
5
k
66
A
A
A
B
B
Close the carton and tape it shut.
B
Glossary
B
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of
these features depends on the model you purchased.
ADF (automatic document feeder)
The document can be placed in the ADF
and scanned one page at a time
automatically.
Auto Reduction
Reduces the size of incoming faxes.
Automatic fax transmission
Sending a fax without picking up the
handset of an external telephone.
Automatic Redial
A feature that enables your machine to
redial the last fax number after five
minutes if the fax did not go through
because the line was busy.
Backup Print
Your machine prints a copy of every fax
that is received and stored in memory.
This is a safety feature so you will not lose
messages during a power failure.
Batch Transmission
(Black and white faxes only) As a cost
saving feature, all delayed faxes to the
same fax number can be sent as one
transmission.
Beeper Volume
Volume setting for the beep when you
press a key or make an error.
Brightness
Changing the Brightness makes the whole
image lighter or darker.
Broadcasting
The ability to send the same fax message
to more than one location.
Caller ID
A service purchased from the telephone
company that lets you see the number (or
name) of the party calling you.
CNG tones
The special tones (beeps) sent by fax
machines during automatic transmission
to tell the receiving machine that a fax
machine is calling.
Coding method
Method of coding the information
contained in the document. All fax
machines must use a minimum standard
of Modified Huffman (MH). Your machine
is capable of greater compression
methods, Modified Read (MR), Modified
Modified Read (MMR) and JPEG, if the
receiving machine has the same
capability.
Colour Enhancement
Adjusts the colour in the image for better
print quality by improving sharpness,
white balance and colour density.
Communication error (Comm. Error)
An error during fax sending or receiving,
usually caused by line noise or static.
Compatibility group
The ability of one fax unit to communicate
with another. Compatibility is assured
between ITU-T Groups.
Contrast
Setting to compensate for dark or light
documents, by making faxes or copies of
dark documents lighter and light
documents darker.
Delayed Fax
Sends your fax at a specified time later.
Density
Changing the Density makes the whole
image lighter or darker.
67
B
Dual Access
Your machine can scan outgoing faxes or
scheduled jobs into memory at the same
time it is sending a fax from memory or
receiving or printing an incoming fax.
Fax/Tel
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
ECM (Error Correction Mode)
Detects errors during fax transmission
and resends the pages of the fax that had
an error.
Fine resolution
Resolution is 203  196 dpi. It is used for
small print and graphs.
Extension telephone
A telephone using the same line as your
fax but plugged into a separate wall
socket.
External telephone
A TAD (telephone answering device) or
telephone that is connected to your
machine.
F/T Ring Time
The length of time that the Brother
machine rings (when the Receive Mode
setting is Fax/Tel) to notify you to pick up
a voice call that it answered.
Fax Detect
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
Fax Forwarding
Sends a fax received into the memory to
another pre-programmed fax number.
Fax Journal
Lists information about the last 200
incoming and outgoing faxes. TX means
Transmit. RX means Receive.
Fax Preview
If you choose Fax Preview you will be able
to view received faxes on the LCD by
pressing the Fax Preview key.
Fax Storage
You can store received faxes in memory.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
68
Greyscale
The shades of grey available for copying,
scanning and faxing photographs.
Group number
A combination of One Touch and
Speed Dial numbers that are stored on a
One Touch key or in a Speed Dial location
for Broadcasting.
Help list
A printout of the complete Menu table that
you can use to program your machine
when you do not have the Basic User's
Guide with you.
Innobella™
Innobella™ is a range of genuine
consumables offered by Brother. For best
quality results Brother recommends
Innobella™ Ink and Paper.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal Reports. You can print the Fax
Journal on demand without interrupting
the cycle.
LCD (Liquid Crystal Display)
The display screen on the machine that
shows interactive messages during OnScreen Programming and shows the date
and time when the machine is idle.
Manual fax
When you lift the handset of your external
telephone you can hear the receiving fax
machine answer before you press
Mono Start or Colour Start to begin
sending the fax.
Glossary
Memory Receive
Receives faxes into the machine's
memory when the machine is out of paper.
Pulse
A form of rotary dialling on a telephone
line.
Menu mode
Programming mode for changing your
machine's settings.
Quick Dial List
A listing of names and numbers stored in
One Touch and Speed Dial memory, in
numerical order.
OCR (optical character recognition)
ScanSoft™ PaperPort™12SE with OCR
or Presto! PageManager software
application converts an image of text to
text you can edit.
One Touch
Keys on the machine’s control panel
where you can store numbers for easy
dialling. You can store a second number
on each key if you hold down Shift as you
press the One Touch key.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Pause
Allows you to place a 3.5 second delay in
the dialling sequence while you are
dialling using the dial pad or while you are
storing One Touch and Speed Dial
numbers. Press Redial/Pause as many
times as needed for longer pauses.
PhotoCapture Center™
Allows you to print digital photos from your
digital camera at high resolution for photo
quality printing.
Photo resolution (Mono only)
A resolution setting that uses varying
shades of grey for the best representation
of photographs.
PictBridge
Allows you to print photos directly from
your digital camera at high resolution for
photo quality printing.
Polling
The process of a fax machine calling
another fax machine to retrieve waiting fax
messages.
Real Time Transmission
When memory is full, you can send faxes
in real time.
Remaining jobs
You can check which jobs are waiting in
memory and cancel jobs individually.
Remote Access Code
Your own four-digit code (--- ) that allows
you to call and access your machine from
a remote location.
Remote Activation Code
Press this code (l 5 1) when you answer
a fax call on an extension or external
telephone.
Remote Deactivation Code
(For Fax/Tel mode only)
When the machine answers a voice call, it
pseudo/double-rings. You can pick up at
an extension telephone by pressing this
code (# 5 1).
Remote Retrieval Access
The ability to access your machine
remotely from a touch-tone telephone.
Resolution
The number of vertical and horizontal lines
per inch. See: Standard, Fine, Super Fine
and Photo.
Ring Delay
The number of rings before the machine
answers in Fax Only and Fax/Tel
modes.
Ring Volume
Volume setting for the machine's ring.
69
B
Scanning
The process of sending an electronic
image of a paper document into your
computer.
Transmission
The process of sending faxes over the
phone lines from your machine to the
receiving fax machine.
Scan to Media
You can scan a monochrome or colour
document into a memory card or USB
Flash memory drive. Monochrome images
will be in TIFF or PDF file format and
colour images may be in PDF or JPEG file
format.
User Settings
A printed report that shows the current
settings of the machine.
Search
An electronic, numerical or alphabetical
listing of stored One Touch, Speed Dial
and Group numbers.
Speed Dial
A pre-programmed number for easy
dialling. You must press
(Phone Book), the two digit code, and
Mono Start or Colour Start to start the
dialling process.
Standard resolution
203  97 dpi. It is used for regular size text
and quickest transmission.
Station ID
The stored information that appears on
the top of faxed pages. It includes the
sender's name and fax number.
Super Fine resolution (Mono only)
392  203 dpi. Best for very small print
and line art.
TAD (telephone answering device)
You can connect an external TAD to your
machine.
Temporary settings
You can choose certain options for each
fax transmission and copy without
changing the default settings.
Tone
A form of dialling on the telephone line
used for touch-tone telephones.
70
WLAN Report
A printed report that shows the result of
the WLAN Connection.
Xmit Report (Transmission Verification
Report)
A listing for each fax sent, that shows its
date, time and number.
C
Index
Numerics
D
2 in 1 ID Copy ..........................................35
Dialling
Groups (Broadcasting) ......................... 10
Direct printing
from a non-PictBridge camera ............. 59
from a PictBridge camera ..................... 57
Dual Access .............................................. 9
A
Access codes, storing and dialling ...........24
Apple Macintosh
See Software User's Guide.
B
F
Broadcasting ............................................10
setting up Groups for ............................27
Fax codes
changing ............................................... 18
Remote Access Code .......................... 18
Fax Forwarding
changing remotely .......................... 19, 20
programming a number ........................ 14
Fax Storage ............................................. 15
printing from memory ........................... 15
turning off ............................................. 17
turning on ............................................. 15
Fax, from PC
See Software User's Guide.
Fax, stand-alone
receiving
Fax Forwarding ................................. 19
into PC .............................................. 15
into the memory ................................ 14
out of paper reception ....................... 14
printing from memory ........................ 15
reducing to fit on paper ..................... 21
retrieving from a remote site ....... 19, 20
sending ................................................... 7
at end of conversation ......................... 9
Broadcasting ..................................... 10
cancelling from memory .................... 12
contrast ............................................... 7
delayed batch transmission ............... 12
delayed fax ........................................ 12
from memory (Dual Access) ................ 9
manual ................................................ 9
overseas ............................................ 12
Real Time Transmission ................... 11
Resolution ........................................... 8
return to factory setting ....................... 8
set new default .................................... 8
Function Lock ............................................ 4
C
Caller ID
Caller ID History report .........................30
Cancelling
Fax Forwarding .............................. 17, 19
Fax Storage ..........................................17
jobs awaiting redial ...............................12
Cleaning
paper feed roller ....................................61
printer platen .........................................61
ControlCenter
See Software User's Guide.
Copy
2 in 1 ID ................................................35
book ......................................................38
density ..................................................36
duplex ...................................................40
enlarge/reduce ......................................32
ink save mode .......................................36
page layout (N in 1) ..............................33
poster ....................................................33
quality ...................................................31
return to factory settings .......................41
set new default ......................................41
skew adjustment ...................................37
sort (ADF only) ......................................36
thin paper ..............................................37
using ADF .............................................36
Watermark ............................................38
using a media card ............................39
using a paper document ....................39
using a template ................................38
using a USB Flash memory drive ......39
71
C
G
Groups for Broadcasting ..........................27
I
ID Copy ....................................................35
Ink cartridges
checking ink volume ..............................64
L
LCD (Liquid Crystal Display)
Dim Timer ...............................................2
Help List ................................................30
M
Macintosh
See Software User's Guide.
Manual
transmission ............................................9
Memory Security ......................................13
Memory Storage ........................................1
Mode, entering
Timer .......................................................3
Movie printing ...........................................43
N
Network
Printing
See Network User's Guide.
Scanning
See Software User's Guide.
O
One Touch
setting up from Caller ID history ............25
setting up from outgoing calls ...............25
P
Packing and shipping the machine ..........65
PaperPort™12SE with OCR
See Software User's Guide. See also Help
in the PaperPort™12SE application.
72
PhotoCapture Center™
Adding Effect ........................................ 45
DPOF printing ....................................... 50
from PC
See Software User's Guide.
Photo Effects
Auto Correct ...................................... 45
Enhance Scenery .............................. 46
Enhance Skin-Tone ........................... 45
Fill Light ............................................. 47
Monochrome ..................................... 48
Night Scene ....................................... 47
Remove Red-Eye .............................. 46
Sepia ................................................. 48
Whiteboard ........................................ 47
Print settings
Borderless ......................................... 53
Brightness ......................................... 52
Colour enhancement ......................... 52
Contrast ............................................. 52
Cropping ............................................ 53
Date Print .......................................... 53
Paper type & size .............................. 51
Quality ............................................... 51
Return to factory setting .................... 54
Set new default ................................. 54
Printing
all photos ........................................... 45
index .................................................. 43
photos ............................................... 44
Scan to Media
auto crop ........................................... 55
memory card ..................................... 54
USB Flash memory ........................... 54
Search by Date ..................................... 49
Slide-Show ........................................... 49
Trimming .............................................. 50
PictBridge
DPOF Printing ...................................... 58
Power failure ............................................. 1
Presto! PageManager
See Software User's Guide. See also Help
in the Presto! PageManager application.
Print
fax from memory .................................. 15
report .................................................... 30
Printing
See Software User's Guide.
Q
S
Quick Dial
Broadcasting .........................................10
deleting Groups .................................28
using Groups .....................................10
Group dial
changing ............................................28
setting up Groups for
Broadcasting ......................................27
One Touch
setting up from Caller ID history ........25
setting up from outgoing calls ............25
Speed Dial
setting up from Caller ID history ........26
setting up from outgoing calls ............26
Scanning
See Software User's Guide.
Security
Secure function lock
administrator password ....................... 5
restricted users .................................... 5
Shipping the machine .............................. 65
Sleep Mode ............................................... 2
Speed Dial
setting up from Caller ID history ........... 26
setting up from outgoing calls .............. 26
R
Reducing
copies ...................................................32
incoming faxes ......................................21
Remote Retrieval .....................................18
commands ............................................19
getting your faxes .................................20
remote access code ..............................18
Remote Setup
See Software User's Guide.
Reports ....................................................29
Caller ID History Report ........................30
Fax Journal ...........................................30
Journal Period ....................................29
Help List ................................................30
how to print ...........................................30
Network Configuration ..........................30
Quick Dial List .......................................30
Transmission Verification ............... 29, 30
User Settings ........................................30
WLAN Report ........................................30
Resolution
setting for next fax ..................................8
Restricted users .........................................5
T
Troubleshooting
checking ink volume ............................. 64
W
Windows®
See Software User's Guide.
Wireless Network
See Quick Setup Guide and Network
User's Guide.
C
73
Visit us on the World Wide Web
http://www.brother.com/
This machine is approved for use in the country of purchase only. Local Brother companies or their
dealers will only support machines purchased in their own countries.
Download PDF

advertising