ARBOR SERIES
C O M M E R C I A L
U N I T S
AFFORDABLE RENEWABLE CLEAN
ARBOR SERIES SPECIFICATION CATALOG
Table of Contents
Model Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
AHRI Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
The Arbor Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
Inside the Arbor Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-14
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-22
Hot Gas Reheat Dehumidification Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-24
Hot Gas Reheat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Application Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-28
Water Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Installation Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-31
Vertical Dimensional Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33
Horizontal Dimensional Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35
Hanger Bracket Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Physical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Electrical Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-41
Blower Performance Data
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-45
Selection Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-47
Reference Calculations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Legend and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Operating Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Correction Factor Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Pressure Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-74
Wiring Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-80
Engineering Guide Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81-83
Revision Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
3
ARBOR SERIES SPECIFICATION CATALOG
Model Nomenclature
1
2
3-5
6
7
8
9
10
11
12
13
14
15
16
17
18
19 20-21 22
Z
S
036
T
L
0
0
0
C
A
N
N
A
5
N
0
0
SS
*
Model Type
Z – Z Series
Vintage
* - Factory Use Only
Operation Range
S – Single Stage
Non-Standard Options
SS – Standard
Unit Capacity (MBTUH)
009, 012, 015, 018,
023 (Horizontal)
024, 030, 036,
041 (Vertical)
042, 048, 060, 070
Drain Pan Option
0 – Composite, No Secondary Connection
1 – Composite, Secondary Connection
2 – Stainless Steel, No Secondary Connection
3 – Stainless Steel, Secondary Connection
Cabinet Option
0 – Unpainted, 1 in MERV 4, Filter Rail
1 – Painted, 1 in MERV 4, Filter Rail
2 – Unpainted, 2 in MERV 13, Filter Rail
3 – Painted, 2 in MERV 13, Filter Rail
4 – Unpainted, 1 in MERV 4, Filter Rack
5 – Painted, 1 in MERV 4, Filter Rack
6 – Unpainted, 2 in MERV 13, Filter Rack
7 – Painted, 2 in MERV 13, Filter Rack
Discharge Configuration
T – Top (Vertical)
E – End (Horizontal)
S – Side (Horizontal)
Return Air Configuration
L – Left
R – Right
Voltage
0 – 208-230/60/1
2 – 265-277/60/1 (009-036)
3 – 208-230/60/3 (023-070)
4 – 460/60/3 (023-070)
5 – 575/60/3 (PSC Only 041-070)
Phase Guard
N – No Phase Guard, No Disconnect
P – Phase Guard, No Disconnect
B – Phase Guard, Disconnect
D – No Phase Guard, Disconnect
All-Aluminum Air Coil Option
5 – AlumiSealTM/Extended Range
6 – AlumiSeal/Standard Range
7 – No Coating/Extended Range
8 – No Coating/Standard Range
Hot Water Generation Option
0 – No HWG, No GeoStart®
2 – HWG w/o Pump, No GeoStart
(Vertical 015-070)
3 – No HWG, GeoStart
5 – HWG w/o Pump, GeoStart
(Vertical 018-070)
Control Option
A – AuroraTM Base Control (ABC)
4 – FX10 std. No Communications
5 – FX10 w/ Open N2 Com Card
6 – FX10 w/ LonWorks Com Card
7 – FX10 w/ BacNet Com Card
Blower Options
0 – PSC Blower
1 – Variable Speed ECM Blower (015-070)
2 – High Static Variable Speed ECM Blower
(042-048)
3 – High Static PSC Blower (024, 030, 042, 048)
4 – 5-Speed ECM Blower (015-070)
Water Control Option
N – None
R – Water Flow Regulator (015-070)
V – 2-Way Valve (015-070)
B – 2-Way Valve w/ Water Flow Regulator
(015-070)
Water Coil Option
C – Copper
N – CuproNickel
Refrigeration Option
0 – None
G – Hot Gas Bypass (015-072)
R – Hot Gas Reheat (015-072)
B – Hot Gas Bypass w/Hot Gas Reheat (015-072)
Sound Kit Option
A – None
B – Sound Kit (Not Available on H009-012)
Note: Phase Guard Only Available on 208-230/60/3, 460/60/3, and 575/60/3
GeoStart is not available with Phase Guard
Rev.: 29 October 2013D
4
ARBOR SERIES SPECIFICATION CATALOG
AHRI Data
PSC Motor
AHRI/ASHRAE/ISO 13256-1
English (IP) Units
Water Loop Heat Pump
Flow Rate
Model
Cooling
EWT 86°F
Capacity
Btu/h
EER
Btu/h/W
Ground Water Heat Pump
Heating
EWT 68°F
Capacity
Btu/h
COP
Cooling
EWT 59°F
Capacity
Btu/h
EER
Btu/h/W
Ground Loop Heat Pump
Heating
EWT 50°F
Capacity
Btu/h
COP
Cooling
EWT 77°F
Capacity
Btu/h
EER
Btu/h/W
Heating
EWT 32°F
Capacity
Btu/h
gpm
cfm
COP
009
3.0
350
8,500
12.0
11,500
4.4
10,500
18.2
9,600
3.7
9,100
13.5
7,600
3.0
012
3.5
400
10,900
12.7
14,700
4.4
12,500
18.2
12,000
3.8
11,500
14.7
9,600
3.2
015
4.0
500
14,000
15.0
16,500
4.8
16,000
24.0
15,000
4.1
14,700
17.2
11,500
3.5
018
5.0
600
17,600
14.6
21,000
4.7
20,600
23.5
17,500
4.0
18,500
17.0
13,700
3.5
023
6.0
800
23,000
14.5
26,000
4.5
25,400
22.5
21,900
3.9
23,900
16.8
17,000
3.4
024
6.0
800
23,900
14.6
27,000
4.7
26,400
22.8
22,300
4.0
24,400
17.0
17,500
3.5
030
8.0
1000
29,500
14.9
34,600
4.8
32,900
23.0
28,300
4.0
29,000
17.0
22,800
3.5
036
9.0
1150
33,300
14.4
40,600
4.5
37,700
21.2
33,000
3.9
34,500
16.6
26,000
3.3
041
11.0
1300
40,000
13.8
45,000
4.3
44,500
20.6
36,000
3.8
41,000
15.8
29,000
3.3
042
11.0
1400
40,800
14.5
45,400
4.5
45,800
22.0
37,000
3.8
42,300
16.8
29,900
3.3
048
12.0
1600
47,700
14.7
56,000
4.4
52,000
21.0
45,900
3.8
49,500
16.8
36,900
3.3
060
15.0
1900
58,400
14.7
72,500
4.4
65,500
20.8
58,400
3.8
60,900
16.6
47,100
3.3
070
18.0
2100
63,000
14.2
79,000
4.4
70,000
20.3
64,100
3.8
68,500
15.2
51,600
3.3
12/6/10
Cooling capacities based upon 80.6°F DB, 66.2°F WB entering air temperature
Heating capacities based upon 68°F DB, 59°F WB entering air temperature
All ratings based upon 208V operation
Variable Speed ECM, or 5-Speed ECM Motor
AHRI/ASHRAE/ISO 13256-1
English (IP) Units
Water Loop Heat Pump
Flow Rate
Model
Cooling
EWT 86°F
Ground Water Heat Pump
Heating
EWT 68°F
Cooling
EWT 59°F
Ground Loop Heat Pump
Heating
EWT 50°F
Cooling
EWT 77°F
Heating
EWT 32°F
gpm
cfm
Capacity
Btu/h
EER
Btu/h/W
Capacity
Btu/h
COP
Capacity
Btu/h
EER
Btu/h/W
Capacity
Btu/h
COP
Capacity
Btu/h
EER
Btu/h/W
Capacity
Btu/h
COP
015
4.0
500
14,000
15.3
16,500
4.9
16,000
24.3
15,000
4.4
14,700
17.5
11,500
3.7
018
5.0
600
17,600
15.2
21,000
4.8
20,600
24.0
17,500
4.4
18,500
17.5
13,700
3.7
023
6.0
800
23,000
15.0
26,000
4.7
25,400
23.0
21,900
4.3
23,900
17.0
17,000
3.6
024
6.0
800
23,900
15.1
27,000
5.0
26,400
23.4
22,300
4.5
24,400
17.5
17,500
3.8
030
8.0
900
29,500
15.7
34,600
5.1
32,900
23.9
28,300
4.4
29,000
18.3
22,800
3.8
036
9.0
1150
33,300
15.0
40,600
4.8
37,700
23.0
33,000
4.3
34,500
17.3
26,000
3.5
041
11.0
1300
40,000
14.5
45,000
4.5
44,500
22.0
36,000
4.0
41,000
16.5
29,000
3.4
042
11.0
1400
40,800
15.6
45,400
5.0
45,800
23.5
37,000
4.3
42,300
18.5
29,900
3.7
048
12.0
1600
47,700
15.5
56,000
4.8
52,000
23.4
45,900
4.2
49,500
18.1
36,900
3.6
060
15.0
1900
58,400
15.3
72,500
4.7
65,500
23.0
58,400
4.0
60,900
17.9
47,100
3.6
070
18.0
2100
63,000
14.3
79,000
4.7
70,000
21.0
64,100
4.0
68,500
16.1
51,600
3.5
12/6/10
Cooling capacities based upon 80.6°F DB, 66.2°F WB entering air temperature
Heating capacities based upon 68°F DB, 59°F WB entering air temperature
All ratings based upon 208V operation
All Arbor Series product is safety listed under UL1995 thru ETL and performance listed with
AHRI in accordance with standard 13256-1.
5
ARBOR SERIES SPECIFICATION CATALOG
AHRI Data cont.
The performance standard AHRI/ASHRAE/ISO 13256-1 became effective January 1, 2000 and replaces AHRI Standards 320, 325, and
330. This new standard has three major categories: Water Loop (comparable to ARI 320), Ground Water (ARI 325), and Ground Loop (ARI
330). Although these standards are similar there are some differences:
Unit of Measure: The Cooling COP
The cooling efficiency is measured in EER (US version measured in Btuh per Watt. The Metric version is measured in a cooling COP
(Watt per Watt) similar to the traditional COP measurement.
Water Conditions Differences
Entering water temperatures have changed to reflect the centigrade temperature scale. For instance the water loop heating test is
performed with 68°F (20°C) water rounded down from the old 70°F (21.1°C).
Air Conditions Differences
Entering air temperatures have also changed (rounded down) to reflect the centigrade temperature scale. For instance the cooling
tests are performed with 80.6°F (27°C) dry bulb and 66.2°F (19°C) wet bulb entering air instead of the traditional 80°F (26.7°C) DB
and 67°F (19.4°C) WB entering air temperatures. 80.6/66.2 data may be converted to 80/67 using the entering air correction table.
This represents a significantly lower relative humidity than the old 80/67 of 50% and will result in lower latent capacities.
Pump Power Correction Calculation
Within each model, only one water flow rate is specified for all three groups and pumping Watts are calculated using the following
formula. This additional power is added onto the existing power consumption.
• Pump power correction = (gpm x 0.0631) x (Press Drop x 2990) / 300
Where ‘gpm’ is waterflow in gpm and ‘Press Drop’ is the pressure drop through the unit heat exchanger at rated water flow in feet
of head.
Fan Power Correction Calculation
Fan power is corrected to zero external static pressure using the following equation. The nominal airflow is rated at a specific
external static pressure. This effectively reduces the power consumption of the unit and increases cooling capacity but decreases
heating capacity. These Watts are significant enough in most cases to increase EER and COPs fairly dramatically over ARI 320, 325,
and 330 ratings.
• Fan Power Correction = (cfm x 0.472) x (esp x 249) / 300
Where ‘cfm’ is airflow in cfm and ‘esp’ is the external static pressure at rated airflow in inches of water gauge.
ISO Capacity and Efficiency Calculations
The following equations illustrate cooling calculations:
• ISO Cooling Capacity = Cooling Capacity (Btuh) + (Fan Power Correction (Watts) x 3.412)
• ISO EER Efficiency (W/W) = ISO Cooling Capacity (Btuh) x 3.412 / [Power Input (Watts) - Fan Power Correction (Watts) + Pump
Power Correction (Watt)]
The following equations illustrate heating calculations:
• ISO Heating Capacity = Heating Capacity (Btuh) - (Fan Power Correction (Watts) x 3.412)
• ISO COP Efficiency (W/W) = ISO Heating Capacity (Btuh) x 3.412 / [Power Input (Watts) - Fan Power Correction (Watts) + Pump
Power Correction (Watt)]
Comparison of Test Conditions
Cooling
Entering Air - DB/WB °F
Entering Water - °F
Fluid Flow Rate
Heating
Entering Air - DB/WB °F
Entering Water - °F
Fluid Flow Rate
ARI 320
ISO/AHRI
13256-1
WLHP
ARI 325
ISO/AHRI
13256-1
GWHP
ARI 330
ISO/AHRI
13256-1 GLHP
80/67
85
*
80.6/66.2
86
**
80/67
50/70
**
80.6/66.2
59
**
80/67
77
**
80.6/66.2
77
**
70
70
*
68
68
**
70
50/70
**
68
50
**
70
32
**
68
32
**
Note *: Flow rate is set by 10°F rise in standard cooling test
Note **: Flow rate is specified by the manufacturer
Part load entering water conditions not shown.
WLHP = Water Loop Heat Pump; GWHP = Ground Water Heat Pump; GLHP = Ground Loop Heat Pump
Conversions:
Airflow (lps) = CFM x 0.472;
ESP (Pascals) = ESP (in wg) x 249;
Water Flow (lps) = GPM x 0.0631;
Press Drop (Pascals) = Press Drop (ft hd) x 2990
6
ARBOR SERIES SPECIFICATION CATALOG
The Arbor Series
The Arbor Series represents a significant improvement in the commercial water source heat pump (wshp). The R-410A product features
high efficiency with industry leading standard options in a compact cabinet suitable for both retrofit and new construction applications. The
product is also targeted to provide optimum performance and flexibility in both water loop and geothermal applications. The new product
features the following options (see nomenclature for more details):
• Wide selection of capacities from 009-070 MBtu/h output
• Complete commercial voltage selection of 208-230 V/60 Hz/1ph, 265/60/1, 208-230/60/3, 460/60/3, and 575/60/3
• All-Aluminum rifled tube-and-fin air coils are not suspectable to formicary corrosion.
• Industry leading quality through engineering and manufacturing using quality components
— High Efficiency and reliable rotary compressors 009-018
— High Efficiency and reliable scroll compressors 023-070
— High Efficiency 3 speed PSC blower motor, 5-speed ECM blower motor, or optional variable speed ECM
• High efficiency performance for maximizing LEED points
— With PSC Blower Motor
Up to 15.0 EER and 4.8 COP (ISO/AHRI 13256-1-WLHP)
— With Variable ECM Blower Motor Up to 15.7 EER and 5.1 COP (ISO/AHRI 13256-1-WLHP)
— With 5-Speed ECM Blower Motor Up to 15.7 EER and 5.1 COP (ISO/AHRI 13256-1-WLHP)
• Small cabinet footprint for easy retrofit of much lower efficiency legacy product
— Compact height and length horizontal cabinet matches legacy product - 11.9 in. high 009-0012, 17 in. high
015-018, 19 in. high 024-036, and 21 in. high 042-070
— Short vertical cabinet
— Special models for specific replacement sizes
- Horizontal 023 model is 22.5 in. wide x 17.2 in. high x 42.0 in. long
- Vertical 041 model is 22.5 in. wide x 26.2 in. deep x 44.2 in. high
• Wide array of standard factory installed options including:
— Configurations – horizontal left and right return, end or side discharge (field switchable); vertical left and right return
— 3 speed PSC, 5-speed ECM, or variable speed ECM blower motor with high static options
— Internal hot water generator coil (vertical only)
— Copper or cupronickel heat exchanger and optional low temperature insulation
— Hot Gas reheat and/or bypass
— Corrosion-proof composite or stainless steel drain pan; including internally mounted secondary drain connection option
— Filter options: standard 1 in. MERV 4 or optional 2 in. MERV 13 factory installed with either filter rails or optional
deluxe filter rack both field switchable between 1 in. and 2 in.
— Aurora Base Control or FX10 Control with N2, LonWorks, or BACnet cards
— Factory mounted internal water valve and/or flow regulator for variable speed pumping systems saving on
installation costs
— Other Options: Sound Kit, coated air coil, phase guard, factory mounted power disconnect, GeoStart soft
starter, painted cabinet
Vertical Arbor Series
Models ZS 009-070 (3/4-6 tons) Single Speed
Horizontal Arbor Series
Models ZS 009-070 (3/4-6 tons) Single Speed
7
ARBOR SERIES SPECIFICATION CATALOG
The Arbor Series cont.
Product Features: Vertical Cabinet
Arbor Series vertical units are designed for high efficiency, maximum flexibility, and primary servicing from the front.
Standard filter rail, field
switchable for 1 in. or
2 in. filters
Optional factory mounted
deluxe filter rack (shown),
field switchable for 1 in. or
2 in. filters
Optional powder coated,
heavy-gauge steel cabinet
Optional factory installed
water heating system with
built-in coil (vertical only, no
factory installed pump)
Removable inlet rings for
easy blower removal
NEW!: Oversized rifled
tube/lanced fin allaluminum air coil (optional
AlumiSealTM coating).
Insulated divider panel
Corrosion-resistant,
composite drain pan with
overflow protection, optional
secondary drain connection
Optional ThermaShield coated
coaxial heat exchanger
Optional stainless steel
drain pan with overflow
protection, optional secondary
drain connection
High efficiency rotary or
scroll compressor
Microprocessor control
Aurora - Standard
FX10 - Optional
Internally trapped
condensate line
Optional GeoStart reduces
starting current by 60-70%
(208-230/60/1 only)
Flush mounted water
connections (no backup
wrenches needed)
Fault and status LEDs
(Aurora Base controls only)
A true left and right return option is available.
8
ARBOR SERIES SPECIFICATION CATALOG
The Arbor Series cont.
Product Features: Horizontal Cabinet
Arbor Series Horizontal units are available in seven cabinet sizes. The cabinets are designed for high efficiency, maximum flexibility, and
primary servicing from the front.
NEW!: Oversized rifled tube/
lanced fin all-aluminum air coil
(optional AlumiSeal coating).
Optional ThermaShield coated
coaxial heat exchanger
Optional hot gas reheat
for optimal humidity control
Optional hot gas bypass
also available
Optional factory mounted filter
rail accepts 1 in. and 2 in. filters
(field switchable)
High efficiency rotary
or scroll compressor
Fault and diagnostic
LEDs (Aurora Base
controls only)
Optional internally piloted hot
gas reheat valve
Flush mounted water
connections
Easily removable
control box
Microprocessor control
Aurora - Standard
FX10 - Optional
Compressor vibration
isolation plate
Four blower deck options are available. Factory or field conversion option of end or side discharge using switchable access panels and a factory
only option of true left or right return air coil.
Left hand return with
end discharge
Left hand return with
side discharge
Right hand return
with end discharge
9
Right hand return
with side discharge
ARBOR SERIES SPECIFICATION CATALOG
The Arbor Series cont.
Flexible Product with Several Standard Options
Super Quiet Option
• Compact cabinet design, vertical and horizontal with true left and
right return configurations
• Horizontal end and side discharge with vertical top discharge
air configurations
• Capacities of 9,000 through 70,000 Btu/h
• All commercial voltages including 208-230/60/1, 265-277/60/1,
208-230/60/3, 460/60/3, and 575/60/3.
• Hot water generation (hot water generator - vertical only)
• GeoStart soft starter
• 3 speed PSC, 5-speed ECM, or optional variable speed ECM
blower motors (high static options available)
• NEW!: All-Aluminum rifled tube-and-fin air coils are not
susceptible to formicary corrosion.
• Optional AlumiSeal air coil e-coating for improved
condensate runoff
• Copper or cupronickel heat exchangers
• Extended range insulation option
• Super Quiet Sound Package, including multi-density
compressor blanket
• Quiet rotary or scroll compressors in all models
• 2-dimension refrigerant piping vibration loops to isolate
the compressor
• Double isolated compressor mounting utilizing eight
durometer selected rubber grommets
• Heavy gauge cabinet and 4 vibration isolating hanger brackets
• Hot Gas Bypass and Reheat (015-072)
• Internally mounted water flow regulator and/or water solenoid
valve for variable speed pumping systems
• Standard Aurora Base Control or FX10 Control with optional N2,
Lonworks, or BACnet DDC cards
• Phase guard with optional ‘dial’ disconnect
• Optional painted cabinet
• Polymer composite drain pan or stainless steel drain pan with
optional secondary drain connection
• 1 in. MERV 4 or 2 in. MERV 13 filters
An optional Super Quiet Sound Package is also available for a
modest cost and features multi-density laminate lined compressor
blanket designed to completely surround the compressor and
suppress low frequency noise.
Indoor Air Quality (IAQ)
All Arbor Series features several IAQ benefits:
• Corrosion-free composite double-sloped drain pan to
eliminate standing water and prevent bacterial growth
• A washable surface on insulation in all air handler
compartments to allow cleanability and inhibit bacteria growth.
Optional non-fibrous closed cell insulation is also available for
more sensitive applications.
• Open filter rail comes standard for non-ducted return
applications. Filter rail is field switchable from 1 in. to 2 in. [2.54
to 5.1 cm] for more filter options.
• Optional factory mounted, four sided, deluxe filter rack that is
field switchable from 1 in. to 2 in. [2.54 to 5.1 cm] is available for
ducted return applications.
• Standard supplied filter is a pleated MERV 4, 1 in. [2.54
cm]. An optional low static high efficiency 2 in. [5.1 cm]
MERV 13, for LEED certification points, is also available.
Other options are available by special request through your
Commercial Sales rep.
High Efficiency
The Arbor Series is a high efficiency water source heat pump in
a compact vertical and horizontal cabinet. The product features
highly efficient and reliable single capacity rotary or scroll
compressors mated with large blowers. These blowers are driven
by efficient 3 speed PSC blower motors, 5-speed ECM blower
motors, or highly efficient variable speed ECM blower motors.
Quiet Operation
All Arbor Series product incorporates several noise reduction
technologies and is ARI 260 sound rated using third party sound
testing. Room Noise Criteria Curves (NC Curve) may be calculated
using data from the ARI 260 ratings giving the engineer total
flexibility in assuring a quiet environment. Please refer to the
separate Sound Ratings and Performance Catalog concerning this
standard and Arbor Series sound performance data.
10
ARBOR SERIES SPECIFICATION CATALOG
The Arbor Series cont.
Aurora Base Control
FX10 Control
The Aurora Base Control (ABC) System is a complete residential
and commercial comfort system that brings all aspects of the HVAC
system into one cohesive module network. Aurora uses the Modbus
communication protocol to communicate between modules. Each
module contains the logic to control all features that are connected
to the module. The Aurora Base Control (ABC) has two Modbus
channels. The first channel is configured as a master for connecting
to devices such as a communicating thermostat, expansion board,
or other slave devices. The second channel is configured as a
slave for connecting the Aurora Interface Diagnostic (AID) Tool.
The optional FX10 control provides unparalleled capability in
several areas including performance monitoring,
humidity, energy management, and service diagnostics, and then
communicates it all thru standard DDC protocols like N2, Lon and
BACnet (MS/TP @ 19,200 Baud rate).
The most unique feature is integrating the FX10 into the Arbor
Series as both the heat pump and DDC controller providing both a
cost advantage and providing features not typically found on WSHP
controls. This integration allows heat pump monitoring sensors,
status and service diagnosis faults to be communicated thru the
DDC direct to the building automation system (BAS), giving building
supervisors detailed and accurate information on every piece of
equipment without removing an access panel!
Control
General Description
Aurora Base Control
The ABC microprocessor provides all the features
necessary to operate today's standard WSHPs that
utilize dual capacity compressors and variable speed
ECM/5-speed ECM blower motors with hot gas
reheat. This control can communicate to a handheld
diagnostic tool to help the installing contractor or
service technician with equipment setup and service.
By utilizing Modbus RTU communication protocol,
the ABC board can communicate with additional
devices on the Aurora network.
Used for residential and commercial
applications that use single or dual
capacity compressors with PSC,
5-speed ECM, or variable speed ECM
blower motors. This base control can
also communicate to the AID Tool
to display faults, inputs/outputs, and
software revision. Commercial features
such as hot gas reheat, slow opening
water valve, and random start are also
capable with the ABC board.
Application
Optional AID Tool
can be used for
field service.
Standalone
FX10
The FX10 microprocessor control is a self-contained
control featuring LP, LOC, HP, LWT, and condensate
overflow fault modes that can be displayed on a
BAS system. Optional handheld Medium User
Interface (MUI) Control can be used for additional
setup or servicing. Program customization is
possible. This control is suited for both single and
dual capacity compressors as well as PSC and
variable speed ECM blower motors.
Commercial applications using single
and dual capacity compressors
with either PSC or variable speed
ECM blower motors. Also suitable for
multi-compressor products. Cannot
be integrated with centralized building
automation systems. Software can be
customized for specific projects.
Optional Medium Use
Interface (MUI) can
be used as a field
service tool.
Standalone
FX10 with N2
FX10 control functions as both unitary heat pump
control and DDC communication. Therefore, detail
operational and fault information is available to
BAS. Other features are the same as FX10 with
addition of Johnson Controls N2 compatibility.
Same as FX10 with Johnson Controls
N2 BAS compatibility.
Optional Medium Use
Interface (MUI) can
be used as a field
service tool.
Johnson
Controls N2
network
FX10 with LonWorks
FX10 control functions as both unitary heat pump
control and DDC communication. Therefore, detail
operational and fault information is available to
BAS. Other features are the same as FX10 with
addition of LonWorks compatibility.
Same as FX10 with LonWorks
BAS compatibility.
Optional Medium Use
Interface (MUI) can
be used as a field
service tool.
LonWorks
FX10 with BACnet
FX10 control functions as both unitary heat pump
control and DDC communication. Therefore, detail
operational and fault information is available to
BAS. Other features are the same as FX10 with
addition of BACnet compatibility.
Same as FX10 with BACnet
BAS compatibility.
Optional Medium Use
Interface (MUI) can
be used as a field
service tool.
BACnet - MS/
TP (19,200
Baud Rate)
Due to communication speed, no more
than 30 units should be connected to a
single trunk of the network.
11
Display/Interface
Protocol
ARBOR SERIES SPECIFICATION CATALOG
The Arbor Series cont.
Internally Mounted Solenoid Valve Option
Phase Guard Monitor
When variable speed circulating pump systems are designed, low
pressure drop (high Cv) solenoid valves are specified at each unit
to vary the pump according to flow required. It is important that
these valves be low pressure drop to avoid unwanted pump watts.
This option factory installs this valve inside the unit.
Factory mounted phase guard device is available to protect the
compressor against loss of phase and reverse rotation.
Electrical Disconnect
An optional factory mounted, internally
wired disconnect is available to avoid
scheduling problems with the electrical
contractor. Other features include:
• Non-fused, ‘dial’ type switch with “on/
off” position
• Compact design
• “Lockout/Tagout” feature to keep the
unit “off” during service
Secondary Drain Connection Option
Some local building authority’s interpretation of codes require more
condensate overflow protection than standard microprocessor
based condensate sensors offer. In these areas a full secondary
drain pan might be required causing both increased cost and
unit service access issues. In many of these cases a secondary
drain connection option can be added to the unit to pass this local
interpretation of condensate drain redundancy. This option adds a
second PVC drain connection to the drain pan at a higher level.
Factory Quality
• All refrigerant brazing is performed in a
nitrogen environment.
• Computer controlled deep vacuum and refrigerant
charging system.
• All joints are leak detected for maximum leak rate of
less than 1/4 oz. per year.
• Computer bar code equipped assembly line ensures all
components are correct.
• All units are computer run-tested with water to verify
both function and performance.
Hot Gas Bypass/Reheat
The hot gas bypass option is designed to limit the minimum
evaporating pressure in the cooling mode to prevent the air coil
from icing. Hot gas reheat option provides consistent comfort by
removing moisture from the air without over cooling the space.
These options are available together or standalone.
Inside the Arbor Series
completely serviced or replaced without removal of the unit. Service
of the blower and blower motor is made easier via the removable
orifice ring on the housing.
Refrigerant
All products all feature zero ozone depletion and low global
warming potential refrigerant R-410A.
Flexible configurations include four (4) blower deck options for
horizontals and a true left and right return on both horizontal
and vertical.
Cabinet
All units are constructed of corrosion resistant galvanized sheet
metal with optional white polyester powder coat paint rated for
more than 1,000 hours of salt spray. One large lift-out access
panel provides access to the compressor and air handler section to
allow servicing of blower motor, blower, and drain pan. Refrigerant
circuit is designed to allow primary serviceability from the front.
Seven (7) horizontal and seven (7) vertical cabinets are provided
for application flexibility. The blower motor and blower can be
Filter Rack
All units come standard with an open filter rail, for use in open
return applications, or an optional deluxe filter rack/duct collar for
use with ducted returns. Both filter options are field switchable
between 1 in. [2.54 cm] and 2 in. [5.1 cm] thick filters for filter
12
ARBOR SERIES SPECIFICATION CATALOG
Inside the Arbor Series cont.
feature an internally trapped condensate line using clear PVC hose
for easy inspection and reduced installation cost. Optional factory
installed stainless steel drain pans are also available.
flexibility. A MERV 4, 1 in. [2.54 cm] is standard with an optional
2 in. [5.1 cm] MERV 13 for LEED certification points and high
efficiency filtration.
Compressors
High efficiency R-410A rotary or scroll
compressors are used on every model.
Rotary or scrolls provide both the highest
efficiency available and great reliability.
Single speed scroll models are available in
commercial voltages.
Electrical Box
Unit controls feature quick
connect wiring harnesses
for easy servicing. Separate
knockouts for low voltage and
two sides of the electrical corner
post for easy access to the
control box. Large transformer
(75VA with ABC with reheat and
FX10, 50VA with ABC without
reheat) assures adequate controls power for accessories.
Compressor Dual Isolation Mounting
Double isolated compressor mounting utilizing eight durometer
selected rubber grommets. This isolation greatly reduces the
primary noise frequency range of 100-300 Hz.
Water Connections
Flush mount FPT water
connection fittings allow
one wrench leak-free
connections and do not
require a backup wrench.
Air Handler Insulation
Washable air handler insulation
surface provides cleanability to
further enhance IAQ.
Horizontal Hanger Kits
Each horizontal unit includes
a hanger kit to meet seismic
specification requirements
while still allowing filter access.
Thermostatic Expansion Valve
All models utilize a balanced port bidirectional
thermostatic expansion valve (TXV) for
refrigerant metering. This allows precise
refrigerant flow in a wide range of entering
water variation (20 to 120°F [-7 to 49°C]) found
in geothermal systems. The TXV is located in
the compressor compartment for easy access.
Drain Pan
All condensate connections are PVC glue for economical corrosion
free connections. Bacteria resistant composite drain pan is sloped to
promote complete drainage and will never rust or corrode. Complete
drainage helps to inhibit bacterial or microbial growth. Vertical units
13
ARBOR SERIES SPECIFICATION CATALOG
Inside the Arbor Series cont.
the motor for easy speed change. All motors are vibration isolated
to reduce noise. High static options are available in some models
for both PSC and variable speed ECM motor versions. Horizontal
units can be field converted from end to side discharge as well.
Water-to-Refrigerant Coaxial Heat Exchanger Coil
Large oversized coaxial refrigerant to water heat
exchangers provide unparalleled
efficiency. The coaxes are designed
for low pressure drop and low flow
rates. All coaxes are pressure rated
to 450 psi water side and 600 psi
on the refrigerant side. Optional
ThermaShield coating is available on
the water-to-refrigerant heat exchanger
to prevent condensation in low
temperature loop operation.
NOTE: 460V 5-speed ECM blower motor does not require a
neutral wire.
Service Connections
and Serviceability
Two Schrader service ports are provided
in every unit. The suction side and
discharge side ports are for field charging
and servicing access. All valves are
7/16 in. SAE connections. All water and
electrical connections are made from the
front of the unit. Unit is designed for front
access serviceability.
5-Speed ECM Constant Torque Motors
The 5-speed ECM is a ‘Constant Torque’ ECM motor and delivers air
flow similar to a PSC but operates as efficiently as a variable speed
ECM motor. Because it’s an ECM motor, the 5-speed ECM can
ramp slowly up or down like the variable speed ECM motor. There
are 5 possible speed taps available on the 5-speed ECM motor with
#1 being the lowest airflow and #5 being the highest airflow. These
speed selections are preset at the time of manufacture and are
easily changed in the field if necessary.
4-Way Reversing Valve
All units feature a reliable all-brass pilot
operated refrigerant reversing valve.
The reversing valve operation is limited
to change of mode by the control to
enhance reliability.
5-Speed ECM Benefits:
- High efficiency
- Soft start
- 5 speeds with up to 4 speeds on-line
- Built in logic allows air flow to change with G, Y1, Y2
and W signals
- Super efficient low airflow continuous blower setting (G)
NEW!: All-Aluminum Air Coil
Beginning in Fall of 2013, all models in the
Arbor line began shipping with all-aluminum air
coils. GeoStar is the first manufacturer to offer
an all-aluminum round-tube-and-fin air coil in
a packaged water source heat pump. These
air coils are constructed of lanced fin and
rifled tube aluminum that is not susceptible to
formicary corrosion. For additional condensate
runoff and meeting project specifications, an
optional AlumiSeal e-coating is available.
GeoStartTM
The optional GeoStart single phase
soft starter will reduce the normal
start current (LRA) by 60%. This
allows the heat pump to go off-grid.
Using GeoStart also provides a
substantial reduction in light flicker,
reduces start-up noise, and improves
the compressor's start behavior.
GeoStart is available in a field retrofit kit or as a factory installed
option for all units.
Blower Motor and Housing
High efficiency low rpm galvanized direct drive blower featuring
3 speed permanently split capacitor (PSC) motor, 5-speed ECM
motor, and optional variable speed ECM blower motor. The variable
speed ECM motor is controlled directly through the unit's Aurora
Base Control. The lower rpm blower also reduces air noise. All PSC
and 5-speed ECM motors have speed selection terminal strip on
14
ARBOR SERIES SPECIFICATION CATALOG
Controls - Aurora Base Controls
Aurora ‘Base’ Control
Field Selectable Options via Hardware
DIP Switch (SW1) – Test/Configuration Button (See SW1
Operation Table)
Test Mode
The control is placed in the test mode by holding the push button
switch SW1 for 2 - 5 seconds. In test mode most of the control
timings will be shortened by a factor of sixteen (16). LED3 (green)
will flash at 1 second on and 1 second off. Additionally, when
entering test mode LED1 (red) will flash the last lockout one
time. Test mode will automatically time out after 30 minutes. Test
mode can be exited by pressing and holding the SW1 button for
2 to 5 seconds or by cycling the power. NOTE: Test mode will
automatically be exited after 30 minutes.
NOTE: Refer to the Aurora Base Control Application and
Troubleshooting Guide and the Instruction Guide: Aurora Interface and
Diagnostics (AID) Tool for additional information.
ECM Configuration Mode
Control Features
The control is placed in the ECM configuration mode by holding
the pushbutton switch SW1 for 5 to 10 seconds, the high, low,
and “G” ECM speeds can be selected by following the LED
display lights. LED2 (yellow) will fast flash when entering the
ECM configuration. When setting “G” speed LED3 (green) will
be continuously lit, for low speed LED1 (red) will be continuously
lit, and for high speed both LED3 (green) and LED1 (red) will be
continuously lit. During the ECM configuration mode LED2 (yellow)
will flash each of the 12 possible blower speeds 3 times. When
the desired speed is flashed press SW1, LED2 will fast flash until
SW1 is released. “G” speed has now been selected. Next select
low speed, and high speed blower selections following the same
process above. After third selection has been made, the control
will exit the ECM configuration mode. Aux fan speed will remain at
default or current setting and requires the AID Tool for adjustment.
Software ABC Standard Version 2.0
Single or Dual Capacity Compressors
Either single or dual capacity compressors can be operated.
ECM Blower Motor Option
An ECM blower motor can be driven directly using the onboard
PWM output. Four blower speeds are available based upon the
G, Y1, Y2, and W input signals to the board. The blower speeds
can be changed either by the ECM manual configurations mode
method or by using the Aurora AID Tool directly. All four blower
speeds can be set to the same speed if desired.
5-Speed ECM Blower Motor Option
A 5-Speed ECM blower motor will be driven directly using the
thermostat connections. Any of the G, Y1, or Y2/W signals can
drive any of the 5 available pre-programmed blower speeds on
the motor.
Reset Configuration Mode
The control is placed in reset configuration mode by holding the
push button switch SW1 for 50 to 60 seconds. This will reset
all configuration settings and the EEPROM back to the factory
default settings. LED3 (green) will turn off when entering reset
configuration mode. Once LED3 (green) turns off, release SW1
and the control will reset.
Other Control Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Random start at power up
Anti-short cycle protection
High and low pressure cutouts
Loss of charge
Water coil freeze detection
Air coil freeze detection
Over/under voltage protection
Condensate overflow sensor
Load shed
Dehumidification (where applicable)
Emergency shutdown
Hot gas reheat operation (where applicable)
Diagnostic LED
Test mode push button switch
Two auxiliary electric heat outputs
Alarm output
Accessory output with N.O. and N.C.
Modbus communication (master)
Modbus communication (slave)
DIP Switch (SW2)
SW2-1
SW2-2
SW2-3
SW2-4
and 2-5
FP1 Selection – Low water coil temperature limit setting
for freeze detection. On = 30°F; Off = 15°F.
FP2 Selection – On = 30°F; Off = N/A
RV – O/B - thermostat type. Heat pump thermostats
with “O” output in cooling or “B” output in Heating can be
selected. On = O; Off = B.
Access Relay Operation (P2)
Access Relay Operation
Cycle with Blower
Cycle with Compressor
Water Valve Slow Opening
Cycle with Comm. T-stat Hum Cmd
15
SW2-4
ON
OFF
ON
OFF
SW2-5
ON
OFF
OFF
ON
ARBOR SERIES SPECIFICATION CATALOG
Controls - Aurora Base Controls cont.
Cycle with Blower - The accessory relay will cycle with the
blower output.
Lockout – when locked out, the blower will operate continuously in
“G” speed, and PSC blower motor output will remain on. The Alarm
output (ALM) and Lockout output (L) will be turned on. The fault type
identification display LED1 (Red) shall flash the fault code. To reset
lockout conditions with SW2-8 On, thermostat inputs “Y1”, “Y2”,
and “W” must be removed for at least 3 seconds. To reset lockout
conditions with SW2-8 Off, thermostat inputs “Y1”, “Y2”, “W”, and
“DH” must be removed for at least 3 seconds. Lockout may also be
reset by turning power off for at least 30 seconds or by enabling the
emergency shutdown input for at least 3 seconds.
Cycle with Compressor - The accessory relay will cycle with
the compressor output.
Water Valve Slow Opening - The accessory relay will cycle and
delay both the blower and compressor output for 90 seconds.
SW2-6
SW2-7
SW2-8
CC Operation – selection of single or dual capacity
compressor. On = Single Stage; Off = Dual Capacity
Lockout and Alarm Outputs (P2) – selection of a
continuous or pulsed output for both the LO and ALM
Outputs. On = Continuous; Off = Pulsed
Future Use
Lockout With Emergency Heat - if the control is locked out in
the heating mode, and a Y2 or W input is received, the control will
operate in the emergency heat mode while the compressor is locked
out. The first emergency heat output will be energized 10 seconds
after the W input is received, and the blower will shift to high speed. If
the control remains locked out, and the W input is present, additional
stage of emergency heat will stage on after 2 minutes. When the W
input is removed, all of the emergency heat outputs will turn off, and
the ECM blower will shift to “G” speed and PSC blower motor output
will remain on.
Alarm Jumper Clip Selection
From the factory, ALM is connected to 24 VAC via JW2. By cutting
JW2, ALM becomes a dry contact connected to ALG.
ECM Blower Speeds
The blower speeds can be changed either by using the ECM
manual configurations mode method or by using the Aurora
AID Tool directly (see Instruction Guide: Aurora Interface and
Diagnostics (AID) Tool topic).
High Pressure – fault is recognized when the Normally Closed
High Pressure Switch, P4-9/10 opens, no matter how momentarily.
The High Pressure Switch is electrically in series with the
Compressor Contactor and serves as a hard-wired limit switch if
an overpressure condition should occur.
Field Selectable Options via Software
Low Pressure - fault is recognized when the Normally Closed
Low Pressure Switch, P4-7/8 is continuously open for 30 seconds.
Closure of the LPS any time during the 30 second recognition
time restarts the 30 second continuous open requirement. A
continuously open LPS shall not be recognized during the 2 minute
startup bypass time.
(Selectable via the Aurora AID Tool)
ECM Blower Speeds
An ECM blower motor can be driven directly using the onboard
PWM output. Four blower speeds are available, based upon the “G”,
Y1 (low), Y2 (high), and Aux input signals to the board. The blower
speeds can be changed either by the ECM manual configurations
mode method (see ECM Configuration Mode topic) or by using the
Aurora AID Tool directly. All four blower speeds can be set to the
same speed if desired. Aux blower speed will remain at default or
current setting and requires the AID Tool for adjustment.
Loss of Charge – fault is recognized when the Normally Closed Low
Pressure Switch, P4-7/8 is open prior to the compressor starting.
Condensate Overflow - fault is recognized when the impedance
between this line and 24 VAC common or chassis ground drops
below 100K ohms for 30 seconds continuously.
Safety Features
The following safety features are provided to protect the
compressor, heat exchangers, wiring and other components from
damage caused by operation outside of design conditions.
Freeze Detection (Coax) - set points shall be either 30°F or 15°F.
When the thermistor temperature drops below the selected set
point, the control shall begin counting down the 30 seconds delay.
If the thermistor value rises above the selected set point, then the
count should reset. The resistance value must remain below the
selected set point for the entire length of the appropriate delay to
be recognized as a fault. This fault will be ignored for the initial 2
minutes of the compressor run time.
Fuse – a 3 amp automotive type plug-in fuse provides protection
against short circuit or overload conditions.
Anti-Short Cycle Protection – 4 minute anti-short cycle protection
for the compressor.
Freeze Detection (Air Coil) - uses the FP2 input to protect
against ice formation on the air coil. The FP2 input will operate
exactly like FP1 except that the set point is 30 degrees and is not
field adjustable.
Random Start – 5 to 80 second random start upon power up.
Fault Retry – in the fault condition, the control will stage off the
outputs and then “try again” to satisfy the thermostat Y input
call. Once the thermostat input calls are satisfied, the control will
continue on as if no fault occurred. If 3 consecutive faults occur
without satisfying the thermostat Y input call, then the control will
go to Lockout mode.
16
ARBOR SERIES SPECIFICATION CATALOG
Controls - Aurora Base Controls cont.
Over/Under Voltage Shutdown - An over/under voltage condition
exists when the control voltage is outside the range of 18 VAC to
30 VAC. If the over/under voltage shutdown lasts for 15 minutes,
the lockout and alarm relay will be energized. Over/under voltage
shutdown is self-resetting in that if the voltage comes back within
range of 18 VAC to 30 VAC for at least 0.5 seconds, then normal
operation is restored.
Cooling Operation
In all cooling operations, the reversing valve directly tracks the O
input. Thus, anytime the O input is present, the reversing valve will
be energized.
Cooling, 1st Stage (Y1, O) - The blower is started on “G” speed
immediately and the compressor is energized 10 seconds after the Y1
input is received. The ECM blower motor is switched to low speed 15
seconds after the Y1 input.
Operation Description
Power Up - The unit will not operate until all the inputs and safety
controls are checked for normal conditions. The unit has a 5 to 80
second random start delay at power up. Then the compressor has
a 4 minute anti-short cycle delay after the random start delay.
Cooling, 2nd Stage (Y1, Y2, O) - The compressor will be staged to
full capacity 20 seconds after Y2 input is received. The ECM blower
will shift to high speed 15 seconds after the Y2 input is received.
Blower (G) - The blower will start immediately upon receiving a
thermostat G command. If there are no other commands from the
thermostat the ECM will run on “G” speed until the G command is
removed. Regardless of blower input (G) from the thermostat, the
blower will remain on for 30 seconds at the end of each heating,
cooling, and emergency heat cycle.
Standby In standby mode, Y1, Y2, W, DH, and G are not active.
Input O may be active. The blower and compressor will be off.
Heating Operation
Heating, 1st Stage (Y1) - The blower is started on “G” speed
immediately and the compressor is energized 10 seconds after
the Y1 input is received. The ECM blower motor is switched to low
speed 15 seconds after the Y1 input.
Dehumidification (Y1, O, DH or Y1, Y2, O, DH) - When a DH
command is received from the thermostat during a compressor
call for cooling the ECM blower speed will be reduced by 15% to
increase dehumidification.
Heating, 2nd Stage (Y1, Y2) - The compressor will be staged to
full capacity 20 seconds after Y2 input is received. The ECM blower
will shift to high speed 15 seconds after the Y2 input is received.
Emergency Shutdown - Four (4) seconds after a valid ES input,
P2-7 is present, all control outputs will be turned off and remain
off until the emergency shutdown input is no longer present. The
first time that the compressor is started after the control exits
the emergency shutdown mode, there will be an anti-short cycle
delay followed by a random start delay. Input must be tied to
common to activate.
Heating, 3rd Stage (Y1, Y2, W) - The hot water pump is deenergized and the first stage of electric heat is energized 10
seconds after the W command is received. If the demand
continues the second stage of electric heat will be energized after
5 minutes.
Continuous Blower Operation - The blower output will be
energized any time the control has a G input present, unless the
control has an emergency shutdown input present. The blower
output will be turned off when G input is removed.
Emergency Heat (W) - The blower will be started on “G” speed,
10 seconds later the first stage of electric heat will be turned on. 5
seconds after the first stage of electric heat is energized the blower
will shift to Aux speed. If the emergency heat demand is not satisfied
after 2 minutes the second electric heat stage will be energized.
Load Shed - The LS input disables all outputs with the exception
of the blower output. When the LS input has been cleared, the antishort cycle timer and random start timer will be initiated. Input must
be tied to common to activate.
Blower (G) - The blower will start immediately upon receiving
a thermostat G command. If there are no other commands
from the thermostat the ECM will run on “G” speed until the G
command is removed. Regardless of blower input (G) from the
thermostat, the blower will remain on for 30 seconds at the end
of each heating cycle.
17
ARBOR SERIES SPECIFICATION CATALOG
Controls - Aurora Base Controls cont.
Aurora ‘Base’ Control LED Displays
Aurora Interface and Diagnostics (AID) Tool
These three LEDs display the status, configuration, and fault
codes for the control. These can also be read in plain English via
the Aurora AID Tool.
The Aurora Interface and
Diagnostics (AID) Tool is a
device that is a member of
the Aurora network. The AID
Tool is used to troubleshoot
equipment which uses the
Aurora control via Modbus
RTU communication. The AID
Tool provides diagnostics,
fault management,
ECM setup, and system
configuration capabilities to the Aurora family of controls. An AID
Tool is recommended, although not required, for ECM airflow
settings. The AID Tool simply plugs into the exterior of the cabinet
in the AID Tool port.
Status LED (LED3, Green)
Description of Operation
Normal Mode
Control is Non-functional
Test Mode
Lockout Active
Dehumidification Mode
(Future Use)
(Future Use)
Load Shed
ESD
(Future Use)
Fault LED, Green
ON
OFF
Slow Flash
Fast Flash
Flash Code 2
Flash Code 3
Flash Code 4
Flash Code 5
Flash Code 6
Flash Code 7
ABC Control Board Layout
Configuration LED (LED2, Yellow)
5.0 in.
G
4
ACC – Dip 2
5
CC – Dual/Single
L – Pulse/Continuous
6
Status
RS485
Exp
LED 4
JW2 - Alarm
Com2
Acc – K6
(+)
(-)
R
C
(+)
(-)
R
G
P8
C
C
3A-Fuse
W
DH
DH
Y2
G
G
C
R
Y1
Field Connections
P1
LO
ACC nc
ACC c
ACC no
ALG
Field Connections
LS
P2
ALM
Y1
Y1
C
C
Factory Fan Connection
O/B
LO
G
R
CC2
6.25 in.
G
EH2
C
EH1
C
CO
N/A
C
P11
P9
RS 485
Factory Use
Factory
Fan – K4
Alarm – K5
Com1
O/B
ABC Basic Faults
LED 5 P7
CC Hi – K3
CC
R
5.5 in.
18
P6
AuroraTM Base
Control
CC – K2
F
7
SW2
CC2
P5
P3
8
Reheat/Normal
RV – K1
G
LO
HI
CCG
CC
FG
F
R
Config
5.75 in.
LED 3
3
ACC – Dip 1
EH1
Y
Factory
Fault
SW1 Test
2
FP2 – 15oF/30oF
RV – B/O
RS485 NET
R
W
LED Flash
Red Fault LED
Lockout Reset/Remove
Code*
Normal - No Faults
OFF
–
Fault - Input
1
No
Auto
Fault - High Pressure
2
Yes
Hard or Soft
Fault - Low Pressure
3
Yes
Hard or Soft
Fault - Freeze Detection FP2
4
Yes
Hard or Soft
Fault - Freeze Detection FP1
5
Yes
Hard or Soft
Fault - Condensate Overflow
7
Yes
Hard or Soft
Fault - Over/Under Voltage
8
No
Auto
Fault - FP1 & FP2 Sensor Error
11
Yes
Hard or Soft
NOTE: All codes >11 use long flash for tens digit and short flash for the ones digit. 20,
30, 40, 50, etc. are skipped.
On
1 LED 2
Off
LED 1 FP1 – 15oF/30oF
ECM PWM
P13
Y2
Fault LED (LED1, Red)
P4
Factory
HP
HP
LP
LP
FP2
FP2
FP1
FP1
REV
REV
C
PWM
CFM
Configuration LED, Yellow
Flashing ECM Setting
Slow Flash
Fast Flash
ES
Description of Operation
No Software Overwritten
DIP Switch was Overwritten
ECM Configuration Mode
R
ARBOR SERIES SPECIFICATION CATALOG
Controls - FX10 (optional)
An optional Medium User Interface (MUI) for control setup and
advanced diagnostics is available with some mounting kits, MUIK3
- Panel mount version and the MUIK4-Wall mount version.
Optional FX10 Microprocessor
and BAS Interface
Zone Sensors
There are two options for zone sensors that can be used with the
FX10 control. Both sensors use a Johnson controls A99 positive
temperature coefficient type sensor. The TAXXJ02 has a set point
adjustment now which will give the end user a +/- 5°F adjustment
from the set point as well as a push button that can be used
for temporary occupancy. The control leaves the factory set to
operate with a TAXXJ02 sensor and can be changed to read the
TAXXA04 sensor through a building automation system or with a
user interface.
Standard Features
•
•
•
•
•
•
•
•
•
•
The FX10 is a microprocessor based control that not only monitors
and controls the heat pump but also can communicate any of this
information back to the building automation system (BAS). This
means that not only does the control monitor the heat pump at the
unit you can also monitor and control many the features over the
BAS. This clearly puts the FX10 in a class of its own.
The control will enumerate all fault conditions (HP, LP, CO, LOC,
and Freeze Detection) over a BAS as well as display them on a
medium user interface (MUI). HP, LP, CO and Freeze Detection
faults can all be reset over a BAS. A Loss Of Charge fault can not
be reset or bypassed until the problem has been corrected. A MUI
is invaluable as a service tool for the building service team.
Anti Short Cycle
High Pressure Protection
Low Pressure Protection
Freeze Detection
Loss Of Charge Detection
Random Start
Display for diagnostics
Reset Lockout at disconnect or through BAS
2 Accessory outputs
Optional BAS add-on controls
DDC Operation and Connection
Other optional network protocol boards that can be added to the
FX10 are:
• Johnson Control N2
• LonWorks
• BACnet
- MS/TP @ 19,200 Baud rate
- Limit devices to 30 on a single trunk line
The unit can be commanded to run by a typical heat pump
thermostat or run based on heating and cooling set points supplied
by a BAS. The control board is wired with quick connect harnesses
for easy field change out of a bad control board. All ECM variable
blower speed settings can be changed over a BAS or with a MUI.
The control has an input programmed to enable field installed
emergency heat in the event that the compressor is locked out.
This input can also be commanded on from a BAS as needed.
An alarm history can be viewed through the MUI and will be held
in memory until the unit is power cycled. Relative humidity can
be read by a 0-5VDC humidity sensor that is displayed over the
network. If you are using an ECM blower motor the control can
enable dehumidification mode based on a set point in the control.
The dehumidification set point itself can also be changed over a
BAS or with a MUI. Dehumidification mode can also be enabled by
the BAS. Because the FX10 is not factory configured to read CO2
levels, contact the factory for application assistance.
Control and Safety Feature Details
Emergency Shutdown
The emergency shutdown mode can be activated by a command
from a facility management system or a closed contact on BI-2.
The default state for the emergency shutdown data point is off.
When the emergency shutdown mode is activated, all outputs will
be turned off immediately and will remain off until the emergency
shutdown mode is de-activated. The first time the compressor
starts after the emergency shutdown mode has been de-activated,
there will be a random start delay present.
The FX10 control has unused analog and digital inputs for field
installed items such as air temperature, water temperature, CO2 or
current status switches. The control has unused binary and PWM
outputs that can be commanded over the BAS for field use.
19
ARBOR SERIES SPECIFICATION CATALOG
Controls - FX10 (optional) cont.
checked 15 seconds before compressor start up to be sure the
pressure switch is closed and then ignored for the first 2 minutes
after the compressor output (BO-2) is enabled. If the switch is
open continuously for (30) seconds during compressor operation
the compressor output (BO-2) will be disabled. The compressor
will not restart until the compressor short cycle time delay has
been satisfied.
Lockout Mode
Lockout mode can be activated by any of the following fault
signals: refrigerant system high pressure, refrigerant system low
pressure, freeze detection, and condensate overflow. When any
valid fault signal remains continuously active for the length of its
recognition delay, the controller will go into fault retry mode, which
will turn off the compressor. After the Compressor short cycle
delay, the compressor will attempt to operate once again. If three
consecutive faults occur in 60 minutes during a single heating or
cooling demand, the unit will go into lockout mode, turning off the
compressor, enabling the alarm output, and setting the blower back
to low speed operation until the controller is reset. If the control
faults due to the low pressure input (BI-3) being open during the
pre-compressor startup check, the control will go into lockout mode
immediately, disabling the compressor from starting and enabling
the alarm output (BO-6). The lockout condition can be reset by
powering down the controller, by a command from the BAS, or by
the holding the ESC and Return keys on the MUI for 5 seconds.
Condensate Overflow
The condensate overflow sensing circuit will monitor the
condensate level as a resistance input to AI-3. If the condensate
water level rises resulting in the input resistance rising above the
set point for the recognition delay period, the condition will be
recognized as a fault. The condensate will be subjected to a (30)
second lockout delay which requires that the fault be sensed for a
continuous (30) seconds before suspending unit operation.
Alarm Output (BO-6)
The alarm output will be enabled when the control is in the lockout
mode and will be disabled when the lockout is reset.
Test Mode
Raising the zone temperature input (AI-1) reading to 180–220°F or
by holding the ESC and down arrow keys on the MUI for 5 seconds
will put the control into test mode. In test mode the random start delay
and the compressor fixed on delay time will both be shortened to
5 seconds and the reversing valve will be allowed to cycle with out
shutting down the compressor. If an MUI is connected to the control
LED 8 will flash and the words “Test Mode Enabled” will be shown
on the LCD display when the control is in test mode. Test mode will
be disabled after a power cycle, 30 minute timeout, or by holding the
ESC and Up arrow keys on the MUI.
Freeze Detection (AI-5)
The freeze detection sensor will monitor the liquid refrigerant
temperature entering the water coil in the heating mode. If the
temperature drops below the freeze detection trip point for the
recognition delay period, the condition will be recognized as a fault.
The freeze detection trip point will be factory set for 30°F (-1°C) and
will be field selectable for 15°F (-9°C) by removing a jumper wire on
BI-5. The freeze detection fault condition will be bypassed 2 minutes
at normal compressor startup, to allow the refrigeration circuit to
stabilize. If the freeze detection sensor becomes unreliable at any
time compressor operation will immediately be suspended until the
problem is corrected. This should be displayed as an alarm on the
BAS and the MUI. This alarm will be reported a “Water Low Temp
Limit” fault.
Sequence of Operation
Power Fail Restart
When the controller is first powered up, the outputs will be
disabled for a random start delay. The delay is provided to prevent
simultaneous starting of multiple heat pumps. Once the timer
expires, the controller will operate normally.
Random Start Delay
This delay will be used after every power failure, as well as
the first time the compressor is started after the control exits
the unoccupied mode or the emergency shutdown mode. The
delay should not be less than 1 second and not longer than 120
seconds. If the control is in test mode the random start delay will
be shortened to 5 seconds.
High Pressure (BI-11)
The high-pressure switch shall be a normally closed (NC) switch
that monitors the systems refrigerant pressure. If the input senses
the high-pressure switch is open it must disable the compressor
output immediately and count the fault. The compressor minimum
on time does not apply if the high-pressure switch opens. The
compressor will not restart until the compressor short cycle time
delay has been satisfied.
Compressor Fixed On Delay Time
The Compressor Fixed On Delay Time will ensure that the
compressor output (B02) is not enabled for 90 seconds after
the control receives a call to start the compressor. This delay is
adjustable from 30 – 300 seconds over a BAS or a MUI. If the
control is in test mode the Compressor Fixed On Delay Timer will
be shortened to 5 seconds.
Low Pressure (BI-3)
The low-pressure switch shall be a normally closed (NC) switch
that monitors the systems refrigerant pressure. The input shall be
20
ARBOR SERIES SPECIFICATION CATALOG
Controls - FX10 (optional) cont.
Set Point Control Mode
In set point control mode the reversing valve output will be
enabled. As the temperature falls below the cooling set point
and begins to operate in the cooling proportional band, the
low capacity compressor output (BO-2) will be enabled. A PI
loop in the programming of the control will determine when the
full capacity compressor output (BO-4) is to be enabled. The
compressor must be operating in low capacity for a minimum
of 30 seconds before the full capacity compressor output can
be enabled. During low capacity compressor operation the
ECM blower will operate in medium speed and will operate in
high speed when the compressor is operating at full capacity.
Compressor Minimum On Delay
The compressor minimum on delay will ensure that the
compressor output is enabled for a minimum of two (2) minute
each time the compressor output is enabled. This will apply in
every instance except in the event the high pressure switch is
tripped or emergency shutdown then the compressor output will be
disable immediately.
Compressor Short Cycle Delay Time
The compressor short cycle time delay will ensure that the
compressor output will not be enabled for a minimum of five (5)
minutes after it is disabled. This allows for the system refrigerant
pressures to equalize after the compressor is disabled.
Thermostat Control Mode
In thermostat mode the compressor will be cycled based on
Y1 and Y2 calls from a room thermostat. When the control
receives a Y1 command (BI-7) from the thermostat the low
capacity compressor output (BO2) will be enabled and the
ECM blower will operate in medium speed. When the control
receives a Y2 command (BI-8) from the thermostat the full
capacity compressor output will be enabled and the ECM
blower will operate in high speed. During the cooling cycle the
reversing valve will be commanded into the “ON” position.
Heating Cycle
On a call for heating, the blower enable output and accessory
output 2 will turn on immediately after the random start delay timer
has been satisfied. If the compressor short cycle time delay has
been satisfied, the compressor will turn on after the blower enable
and accessory output 2 are on and the fixed compressor start delay
timers have been satisfied.
Auxiliary heat output can be controlled over the BAS.
Set Point Control Mode
In set point control mode the reversing valve output will be
disabled. As the temperature drops below the heating set
point and begins to operate in the heating proportional band,
the compressor (low capacity for two-stage compressors)
output (BO-2) will be enabled. For units with two-stage
compressors, a PI loop in the programming of the control will
determine when the full capacity compressor output (BO-4)
is to be enabled. The compressor must be operating in low
capacity for a minimum of 30 seconds before the full capacity
compressor output can be enabled. During low capacity
compressor operation the ECM blower will operate in medium
speed and will operate in high speed when the compressor is
operating at full capacity.
ECM Blower Operation
Blower speeds will be selected through the user interface or the
facility management system. There will be a total of 12 speeds
selectable with only three being selected at any one time. The
lowest numbered speed selection set to ON will select the lowspeed blower setting, the middle selection set to ON will select the
medium-speed blower setting and the highest selection set to ON
will select the high-speed blower setting. If all selections are set to
OFF the software shall select speed setting 10 for low-speed, 11 for
medium-speed, and will select speed setting 12 for high speed. If
only one selection is set to ON, that selection will set the low-speed
blower setting, the medium-speed setting will be 11, and the highspeed setting will be speed 12. The maximum low-speed setting
will be speed 10 and the minimum high-speed setting will be speed
3. In addition there is a low limit setting in the software to prevent
the ECM blower speed from being set below acceptable limits for
each unit size.
Thermostat Control Mode
In thermostat mode the compressor will be cycled based on
Y1 and Y2 calls from a room thermostat. When the control
receives a Y1 command (BI-7) from the thermostat the low
capacity compressor output (BO2) will be enabled and the
ECM blower will operate in medium speed. When the control
receives a Y2 command (BI-8) from the thermostat the ECM
blower will operate in high speed. During the heating cycle the
reversing valve will be commanded into the off position.
ECM Blower airflow “Soft Switch Settings”
A set of 12 “soft switches” accessible through the user interface
or building automation system are used to select the three blower
speed settings for the ECM blower motor. The 12 soft switches
work in exactly the same way as the hardware switches used on
the Premier control (Refer to Blower Performance Data - ECM
Motor for proper settings). No more than three soft switches may
be set to the “ON” position. The first “ON” switch (the lowest
number switch) determines the “low speed blower” setting. The
second determines the “medium speed blower” setting, and the
third determines the “high speed blower” setting.
Cooling Cycle
On a call for cooling, the blower enable output and accessory
output 2 will turn on immediately after the random start delay timer
has been satisfied. If the compressor short cycle time delay has
been satisfied, the compressor will turn on after the blower enable
and accessory output 2 are on and the fixed compressor start delay
timers have been satisfied.
21
ARBOR SERIES SPECIFICATION CATALOG
Controls - FX10 (optional) cont.
Emergency Heat/Network Enabled Output (BO5)
Inputs and Outputs Configuration
This output is set from the factory to enable/disable emergency
heat. If a problem occurs with the unit resulting in the compressor
being locked out in heating mode, the control will automatically
enable this output to turn on field installed electric heat. This
output is interlocked with the blower proving input BI-6 (Blower
proving sensors must be field supplied and installed). BI-6 must be
connected to PB2 position 3 (see unit schematic) in the field if no
blower proving sensor is desired. There is a configurable parameter
available through a BAS network that must be enabled if this output
is to be commanded over the BAS network.
Field Selectable Options
Freeze Detection Set Point (BI-5)
The freeze detection set point input allows you to adjust the freeze
detection set point (AI-5). When the jumper is installed on BI-5 (Wire
#24) the freeze detection set point is factory set for 30°F (-1°C).
When the jumper on BI-5 (Wire #24) is removed the freeze detection
set point will be 15°F (-9°C).
Accessory Outputs (BO-7 and BO-8)
Accessory Output 1 will be energized 90 seconds prior to
the compressor output being energized. Accessory Output 2
will be energized with the blower output (BO-1). When the
corresponding compressor output is turned off the accessory
output will be deactivated immediately. These outputs are
selectable for normally open or normally closed operation through
the MUI or through the BAS.
MUI Alarm History Reporting
If a fault occurs the fault will be recorded in history for display on
the medium user interface in the History Menu. Each fault type will
be displayed in the history menu with a number between 0 and 3.
A reading of 3+ will mean that fault has occurred more than three
times in the past. The history menu can be cleared with a power
cycle only. Alarm date and time are not included in the history.
Hot Gas Reheat/Hot Gas Bypass
pressure low temperature gas into a superheated vapor. A small
copper bleed line is located on the reheat/reclaim valve to allow
refrigerant that has migrated to the reheat coil to escape.
Hot Gas Reheat Description
The refrigerant flows in normal heat pump path in heating and
cooling mode. During the Reheat mode, the operation begins
with superheated vapor leaving the compressor going through
the reheat valve to the reheat air coil. In the reheat coil the high
temperature high pressure gas reheats the air exiting the unit to
near neutral. Next, the refrigerant exits the reheat coil and passes
through a check valve, which is used to prevent refrigerant flow
into the reheat coil during normal heating and cooling operation.
The refrigerant passes through the check valve and is then
diverted to the coaxial heat exchanger by the four way reversing
valve. The hot gas enters the coaxial heat exchanger which will
condense the gas to a high pressure liquid due to heat being
rejected to the loop fluid. The high pressure liquid leaves the coax
and enters the inlet of the TXV. After passing through the TXV the
low pressure mixture of liquid/vapor refrigerant expands in the
air coil evaporating into a low pressure low temperature gas and
moves back through the reversing valve and into the compressor
suction. The cycle then starts again by compressing the low
Hot Gas Bypass Description
The hot gas bypass (HGB) option is designed to limit the minimum
evaporating pressure in the cooling mode to prevent the air coil
from icing. The HGB valve senses pressure at the outlet of the
evaporator by an external equalizer. If the evaporator pressure
decreases to 115 psig the HGB valve will begin to open and
bypass hot discharge gas into the inlet of the evaporator. The
valve will continue to open as needed until it reaches its maximum
capacity. Upon a rise of suction pressure, the valve will begin to
close back off and normal cooling operation will resume.
22
ARBOR SERIES SPECIFICATION CATALOG
Hot Gas Reheat Dehumidification Overview
The Design of Reheat Equipment
Hot Gas Reheat Dehumidification Overview
Hot gas reheat can help maintain specific humidity levels and
neutral air in a building. ASHRAE recommends a relative humidity
range of 30-60% with levels greater than 65% making mold growth
a possibility. The dehumidification relative humidity set points of
57% (on) and 52% (off) are recommended. During reheat the
leaving air temperature (LAT) will approximate neutral air. The
included chart (Leaving Air Temperature vs. Entering Water and Air
Conditions Chart) shows the LAT vs entering water temperature
(EWT) to the unit at differing entering air conditions. At 86-90°F
EWT the unit will provide nearly neutral air.
Dehumidification - The Need for Reheat
With tighter construction and more and more ventilation air
being introduced into buildings, there is more need now than
ever for proper humidity control. Ensuring dehumidification
can provide consistent employee comfort, a reduction in mold
liability, a reduction in cooling costs. Reduced humidity also
provides an improvement in indoor air quality (IAQ) thru lower
humidity levels which can reduce allergen levels, inhibit mold and
bacterial growth, and provide an improved computer environment.
ASHRAE 90.1 speaks of an acceptable humidity range in all
commercial buildings.
Moisture Removal Capacity
The amount of moisture removal may be calculated by subtracting
the sensible cooling capacity from the total cooling capacity in
the equipment performance data of the specifications catalog or
submittal data. An example is shown below:
Typical Reheat Applications
Reheat can be used wherever moisture is a problem. Schools,
high latent auditorium and theaters, makeup air units*, and
computer rooms are typical applications. Although reheat equipped
water source heat pumps (wshp’s) can condition limited amounts
of outdoor air, the percentage of this outdoor air should never
exceed 50% of the return air to the unit limiting the mixed return
air temperature to a minimum of 50°F. When cold entering air
conditions are anticipated, hot gas bypass option should be
considered to prevent air coil freeze up.
Model ZS*048, 1275 cfm, 12 gpm, 90°F EWT
TC – SC = LC
46.5 – 34.6 MBtu/h = 11.9 MBtu/h
Where TC = total cooling capacity, SC=sensible capacity, LC=latent capacity
*A dedicated outdoor air system (DOAS) should be investigated for
100% outdoor air applications.
Leaving Air Temperature vs. Entering Water and Air Conditions Chart
'
@Sbc`\/W`
&#
&RSU420
$%RSU4E0
&
%#RSU420
$!RSU4E0
%#
%RSU420
#'RSU4E0
:dU/W`4
%
$#
$
##
#
"#
"
!
"
#
$
%
3EB4
23
&
'
ARBOR SERIES SPECIFICATION CATALOG
Hot Gas Reheat Dehumidification Overview cont.
Hot Gas Reheat Dehumidification Overview
cont.
Variable speed ECM models will generally compensate up to their
maximum ESP of 0.5 in. wg. for 1/2 hp and 0.75 in. wg. for 1 hp.
Btu/hr may be converted to lbs/hr or grains per hour as shown in
the equations below.
Model ZS048, 1500 cfm,
H x W = SA
20 x 40 = 800 in.2 = 5.56 ft.2
11,900 Btu/h / 1,069 Btu/lb of water vapor
at 80/67 DB/WB°F = 11.13 lbs/hr
Where H=fin height of air coil, W=fin length of air coil, SA=fin surface area
11.13 lbs/hr x 7,000 grains/lb = 77,910 grains/hr
Adjustment must be made for dehumidification mode, 85% of cfm,
External Static Pressure Adjustment
1500 x 0.85 = 1,275 cfm
With a reheat coil option installed an adjustment for external static
pressure (ESP) needs to be made. The following table will show the
reduction in ESP for any model relating coil air velocity and ESP.
Calculate air velocity, fpm, cfm / SA
1,275 cfm / 5.56 ft.2 = 229 fpm
ESP vs. Coil Velocity Table
Coil Velocity (fpm)
250
300
350
400
ESP Increase (in. wg.)
0.10
0.14
0.17
0.20
Refer to the ESP vs. Coil Velocity Table and look up the fpm to
find ESP increase. If air velocity is below 250 cfm assume 0.10
increase in ESP. Interpolation of data within the table is permitted.
Reheat Coil
Hot Gas Bypass with Hot Gas Reheat Layout
Air
Coil
Suction
RV
Compressor
Coax
TXV
Discharge
Check
Valve
Hot Gas
Bypass Valve
24
Reheat
Valve
ARBOR SERIES SPECIFICATION CATALOG
Hot Gas Reheat - Controls
The reheat option is available with the Aurora or FX10 control.
Three control schemes are available:
Dehumidification Mode Operation
Upon a call for dehumidification, the blower relay and reversing
valve coil are energized immediately, and the compressor
contactor will energize after a 90 second delay. The reheat valve
coil will energize once the compressor has been operational for
30 seconds.
Room wall dehumidistat
An optional room wall dehumidistat that controls the reheat mode
thru a 24VAC ‘Hum’ input (On or Off). Setpoint and deadband is
determined by the dehumidistat.
If a call for space heating is received during reheat operation the
compressor will shut down for 5 minutes and the unit will restart
in the heating mode. Once the requirement for space heating has
been satisfied the unit will shut down for 5 minutes and re-start in
reheat mode.
Duct humidity sensor (FX10 only)
An optional duct humidity sensor is installed. The FX10 control
reads the humidity from the sensor and determines operation
mode. Setpoint and deadband are internally set by the FX10
control and are adjustable. Continuous blower operation is a
requirement for this mode to accurately measure relative humidity
during the off cycle.
If a call for space cooling is received during reheat operation
the reheat valve coil will be disabled until the space cooling
requirements have been satisfied. Once the space cooling
requirements have been satisfied the reheat valve coil will be
energized with out shutting down the compressor.
Room wall humidity sensor (FX10 only)
An optional wall humidity sensor is installed. The FX10 control
reads the humidity from the sensor and determines operation
mode. Setpoint and deadband are internally set by the FX10
control and are adjustable. Continuous blower operation is NOT a
requirement for this mode.
Dehumidification Set Point
(used only with a humidity sensor)
The factory default set point for dehumidification is 52% this is field
adjustable from 30% to 60%. In addition there is a factory default
differential of 5% field adjustable from 5% to 15%. The control will
enable re-heat when the space humidity rises above the set point
plus the differential. Depending upon the environmental conditions
within the building and the operating parameters of the water
source heat pump, the unit may not be capable of maintaining the
lower control limit of 30% relative humidity over extended periods
of time.
The unit will cycle thru a ‘flush cycle’ to purge refrigerant and
oil from the idle heat exchanger once every 24 hours when in
cooling mode. The FX10 control will provide an option to set back
reheat to an adjustable unoccupied humidity set point during
unoccupied time periods. This option is factory set to “OFF”
so reheat will control to one set point at all times. If set back is
required during unoccupied times the option must be set to “ON”
in the field by the building automation system or a user interface.
The dehumidification set back will only work when using a duct
humidity sensor or room wall humidity sensor.
Reheat operation during periods of un-occupancy
This unoccupied set point is useful to reduce energy use in
dehumidification. Many system designs greatly reduce or even
eliminate fresh air makeup during the unoccupied hours and
the need for reheat is lessened. The control logic contains an
unoccupied set point that can be used for the unoccupied mode
if desired. The factory default for the set point is 60% and is
adjustable from 30% to 60%. The unoccupied setback must be
enabled either through a building automation system or with a user
interface. Factory default for unoccupied setback is off.
Mode of Operation
Please refer to the refrigeration circuit diagram (Hot Gas Reheat Refrigerant section) and the hot gas reheat wiring schematic.
Heating Mode Operation
Upon a call for heating (Y), blower relay is energized immediately,
and the compressor contactor will be energized after a 90
second delay.
Space Humidity High and Low Alarm Limit
(building automation system only)
The control has a high and low alarm limit that can be enumerated
over a building automation system. The factory default set point
for these alarm limits is 0% for the low alarm and 100% for the
high alarm limit. These limits can be adjusted though a building
automation system. Caution should be used in selecting these
limits so as not to cause nuisance alarms.
Cooling Mode Operation
Upon a call for cooling (Y, O), blower relay and reversing valve
coil are energized immediately, and the compressor contactor
is energized after a 90 second delay. If there is a call from the
de-humidistat or the internal control logic see the humidity sensor
has reached set point the blower cfm will be reduced by 15% to
increase the unit’s latent capacity.
25
ARBOR SERIES SPECIFICATION CATALOG
Application Notes
requiring minimal ductwork. Maintenance can be done on individual
units without system shut-down. Conditions remain comfortable
since each unit operates separately, allowing cooling in one area
and heating in another. Tenant spaces can be finished and added
as needed. Power billing to tenants is also convenient since each
unit can be individually metered: each pays for what each uses.
Nighttime and/or weekend uses of certain areas are possible
without heating or cooling the entire facility. A decentralized
system also means if one unit should fault, the rest of the system
will continue to operate normally, as well as eliminating air crosscontamination problems and expensive high pressure duct systems
requiring an inefficient electric resistance reheat mode.
The Closed Loop Heat Pump Concept
The basic principle of a water source heat pump is the transfer
of heat into water from the space during cooling, or the transfer
of heat from water into the space during heating. Extremely high
levels of energy efficiency are achieved as electricity is used only to
move heat, not to produce it. Using a typical Arbor Series, one unit
of electricity will move four to five units of heat.
When multiple water source heat pumps are combined on a
common circulating loop, the ultimate in energy efficiency is
created: The heat pump units on cooling mode are adding heat
to the loop which the units in heating mode can absorb, thus
removing heat from the area where cooling is needed, recovering
and redistributing that heat for possible utilization elsewhere in
the system. In modern commercial structures, this characteristic
of heat recovery from core area heat generated by lighting, office
equipment, computers, solar radiation, people or other sources, is
an important factor in the high efficiency and low operating costs of
closed source heat pump systems.
The Arbor Series Approach
There are a number of proven choices in the type of Arbor Series
system which would be best for any given application. Most often
considered are:
Vertical - Closed Loop/Ground Source
Return Water
Heater/
Rejector
Z Series
Unit
Z Series
Unit
Z Series
Unit
Z Series
Unit
Z Series
Unit
Z Series
Unit
Pumps
Supply Water
In the event that a building's net heating and cooling requirements
create loop temperature extremes, Arbor Series units have the
extended range capacity and versatility to maintain a comfortable
environment for all building areas. Excess heat can be stored
for later utilization or be added or removed in one of three ways;
by ground-source heat exchanger loops: plate heat exchangers
connected to other water sources, or conventional cooler/boiler
configurations. Your sales representative has the expertise and
computer software to assist in determining optimum system type for
specific applications.
• Closed Loop/Ground-Source Systems utilize the stable
temperatures of the earth to maintain proper water source
temperatures (via vertical or horizontal closed loop heat exchangers)
for Arbor Series extended range heat pump system. Sizes range
from a single unit through many hundreds of units. When net cooling
requirements cause closed loop water temperatures to rise, heat is
dissipated into the cooler earth through buried high strength plastic
pipe “heat exchangers.” Conversely if net space heating demands
cause loop heat absorption beyond that heat recovered from building
core areas, the loop temperature will fall causing heat to be extracted
from the earth. Due to the extended loop temperatures, AHRI/ISO
13256-1 Ground Loop Heat Pumps are required for this application.
The Closed Loop Advantage
A properly applied water source heat pump system offers many
advantages over other systems. First costs are low because
units can be added to the loop on an “as needed basis”- perfect
for speculative buildings. Installed costs are low since units are
self-contained and can be located adjacent to the occupied space,
26
ARBOR SERIES SPECIFICATION CATALOG
Application Notes cont.
surface run-off. Sizing requirements for the surface water is a
minimum of 500 sq. ft./ton of surface area at a minimum depth of 8
feet. Your sales representative should be contacted when designs
for heating dominated structures are required.
Because auxiliary equipment such as a fossil fuel boiler and cooling
tower are not required to maintain the loop temperature, operating
and maintenance costs are very low.
Ground-source systems are most applicable in residential and
light commercial buildings where both heating and cooling are
desired, and on larger envelope dominated structures where core
heat recovery will not meet overall heating loads. Both vertical and
horizontally installed closed-loops can be used. The land space
required for the “heat exchangers” is 100-250 sq. ft./ton on vertical
(drilled) installations and 750-1500 sq. ft./ton for horizontal (trenched)
installations. Closed loop heat exchangers can be located under
parking areas or even under the building itself.
Plate Heat Exchanger - Closed Loop/Ground Water
On large multi-unit systems, sizing the closed loop heat exchanger
to meet only the net heating loads and assisting cooling loads with a
closed circuit cooling tower may be the most cost effective choice.
Surface Water - Closed Loop/Ground Source
• Closed Loop/Ground Water Plate Heat Exchanger
Systems utilize lake, ocean, well water or other water sources to
maintain closed loop water temperatures in multi-unit Arbor Series
systems. A plate frame heal exchanger isolates the units from any
contaminating effects of the water source, and allows periodic
cleaning of the heat exchanger during off peak hours.
Operation and benefits are similar to those for ground-source
systems. Due to the extended loop temperatures, AHRI/ISO
13256-1 Ground Loop Heat Pumps are required for this application.
Closed loop plate heat exchanger systems are applicable in
commercial, marine, or industrial structures where the many
benefits of a water source heat pump system are desired,
regardless of whether the load is heating or cooling dominated.
• Closed Loop/Ground-Source Surface Water Systems also
utilize the stable temperatures of Surface Water to maintain proper
water source temperatures for Arbor Series extended range heat
pump systems. These systems have all of the advantages of
horizontal and vertical closed loop systems. Due to the extended
loop temperatures, AHRI/ISO 13256-1 Ground Water or Ground
Loop Heat Pumps are required for this application.
In cooling dominated structures, the ground-source surface water
systems can be very cost effective especially where local building
codes require water retention ponds for short term storage of
27
ARBOR SERIES SPECIFICATION CATALOG
Application Notes cont.
• Closed Loop /Cooler-Boiler Systems utilize a closed heat
recovering loop with multiple water source heat pumps in the more
conventional manner. Typically a boiler is employed to maintain
closed loop temperatures above 60°F and a cooling tower to
maintain loop temperatures below 90°F. These systems are
applicable in medium to large buildings regardless of whether the
load is heating or cooling dominated. Due to the moderate loop
temperatures, AHRI/ISO 13256-1 Water Loop Heat Pumps are
required for this application.
Cooler/Boiler - Closed Loop
Water Quality
In ground water situations where scaling could be heavy or where
biological growth such as iron bacteria will be present, a closed
loop system is recommended. The heat exchanger coils in ground
water systems may, over a period of time, lose heat exchange
capabilities due to a buildup of mineral deposits inside. These
can be cleaned, but only by a qualified service mechanic, as
special solutions and pumping equipment are required. Hot water
generator coils can likewise become scaled and possibly plugged.
Material
pH
Scaling
Acidity/Alkalinity
Calcium and
Magnesium Carbonate
Hydrogen Sulfide
Corrosion
Iron Fouling
(Biological Growth)
Sulfates
Chlorine
Chlorides
Carbon Dioxide
Ammonia
Ammonia Chloride
Ammonia Nitrate
Ammonia Hydroxide
Ammonia Sulfate
Total Dissolved Solids (TDS)
LSI Index
Iron, FE2+ (Ferrous)
Bacterial Iron Potential
Iron Oxide
Suspended Solids
Erosion
Threshold Velocity
(Fresh Water)
NOTES: Grains = ppm divided by 17
mg/L is equivalent to ppm
In areas with extremely hard water, the owner should be informed
that the heat exchanger may require occasional flushing. Failure
to adhere to the guidelines in the water quality table could result in
loss of warranty.
Units with cupronickel heat exchangers are recommended for open
loop applications due to the increased resistance to build-up and
corrosion, along with reduced wear caused by acid cleaning.
Copper
7-9
(Total Hardness)
less than 350 ppm
Less than 0.5 ppm (rotten egg
smell appears at 0.5 ppm)
Less than 125 ppm
Less than 0.5 ppm
Less than 20 ppm
Less than 50 ppm
Less than 2 ppm
Less than 0.5 ppm
Less than 0.5 ppm
Less than 0.5 ppm
Less than 0.5 ppm
Less than 1000 ppm
+0.5 to -0.5
90/10 Cupronickel
7-9
(Total Hardness)
less than 350 ppm
316 Stainless Steel
7-9
(Total Hardness)
less than 350 ppm
10 - 50 ppm
Less than 1 ppm
Less than 125 ppm
Less than 0.5 ppm
Less than 125 ppm
10 - 50 ppm
Less than 2 ppm
Less than 0.5 ppm
Less than 0.5 ppm
Less than 0.5 ppm
Less than 0.5 ppm
1000 - 1500 ppm
+0.5 to -0.5
Less than 200 ppm
Less than 0.5 ppm
Less than 300 ppm
10 - 50 ppm
Less than 20 ppm
Less than 0.5 ppm
Less than 0.5 ppm
Less than 0.5 ppm
Less than 0.5 ppm
1000 - 1500 ppm
+0.5 to -0.5
< 0.2 ppm
< 0.2 ppm
< 0.2 ppm
Less than 1 ppm, above this level
deposition will occur
Less than 10 ppm and filtered for
max. of 600 micron size
Less than 1 ppm, above this level
deposition will occur
Less than 10 ppm and filtered for
max. of 600 micron size
Less than 1 ppm, above this level
deposition will occur
Less than 10 ppm and filtered for
max. of 600 micron size
< 6 ft/sec
< 6 ft/sec
< 6 ft/sec
2/22/12
28
ARBOR SERIES SPECIFICATION CATALOG
Installation Notes
is typically stainless steel braid and includes a swivel fitting on
one end for easy removal and is flexible to help isolate the unit
for quieter operation. Isolation valves for servicing, y-strainers for
filtering and memory-stop flow valve or a balancing valve can be
provided for consistent water flow through the unit.
Typical Unit Installation
Unit Location
Locate the unit in an indoor area that allows for easy removal of
the filter and access panels. Location should have enough space
for service personnel to perform maintenance or repair. Provide
sufficient room to make water, electrical and duct connection(s). If
the unit is located in a confined space, such as a closet, provisions
must be made for return air to freely enter the space by means
of a louvered door, etc. Any access panel screws that would be
difficult to remove after the unit is installed should be removed
prior to setting the unit. On horizontal units, allow adequate room
below the unit for a condensate drain trap and do not locate the unit
above supply piping. Care should be taken when units are located
in unconditioned spaces to prevent damage from frozen water lines
and excessive heat that could damage electrical components.
All unit source water connections are fittings that accept a male
pipe thread (MPT). Insert the connectors by hand, then tighten
the fitting with a wrench to provide a leakproof joint. The open and
closed loop piping system should include pressure/temperature
ports for serviceability. The proper water flow must be provided
to each unit whenever the unit operates. To assure proper flow,
use pressure/temperature ports to determine the flow rate. These
ports should be located at the supply and return water connections
on the unit. The proper flow rate cannot be accurately set without
measuring the water pressure drop through the refrigerant-to-water
heat exchanger. Never use flexible hoses smaller than the inside
diameter of the water connection at the unit. Limit hose length to 10
feet per connection. Check carefully for water leaks.
Water Piping
Piping is usually design as ‘reverse return’ to equalize flow paths
through each unit. A short flexible pressure rated hose is used to
make connection to the fixed building piping system. This hose
29
ARBOR SERIES SPECIFICATION CATALOG
Installation Notes cont.
directions to facilitate the removal of condensate. Use only the
bolts provided in the kit to attach hanger brackets. The use of
longer bolts could damage internal parts.
Installing Horizontal Units
Remove and discard the compressor hold down shipping bolt
located at the front of the compressor mounting bracket prior to
setting the unit in place. Horizontal units are available with side or
end discharge.
Some applications require the installation of horizontal units on
an attic floor. In this case, the unit should be set in a full size
secondary drain pan on top of a vibration absorbing pad. The
secondary drain pan prevents possible condensate overflow or
water leakage damage to the ceiling. The secondary drain pan is
usually placed on a plywood base isolated from the ceiling joists by
additional layers of vibration absorbing material.
NOTE: Left (Right) Return Side Discharge cannot be converted to
Left (Right) Return End Discharge or vice versa, without additional
custom sheet metal parts. Horizontal units are normally suspended
from a ceiling by four (009-060 models) or five (070-072 models)
3/8 in. diameter threaded rods. The rods are usually attached to
the unit by hanger bracket kits furnished with each unit.
CAUTION: Do not use rods smaller than 3/8 in.
diameter since they may not be strong enough to
support the unit. The rods must be securely anchored
to the ceiling.
Lay out the threaded rods per the Hanger Bracket Dimensions
table. Assemble the hangers to the unit as shown. Securely
tighten the brackets to the unit using the weld nuts located on
the underside of the bottom panel. When attaching the hanger
rods to the bracket, a double nut is required since vibration could
loosen a single nut. To allow filter access, install hanger brackets
as illustrated in the Hanger Bracket Locations section. The unit
should be pitched approximately 1/4 in. towards the drain in both
30
ARBOR SERIES SPECIFICATION CATALOG
Installation Notes cont.
Ductwork
• Ensure return air grilles will not allow line of site noise to
transfer to adjacent space. Use a sound barrier or some
other material to isolate the grille from the unit. A supply grille,
boot and short piece of flex duct pointed away from the unit can
greatly attenuate equipment noise.
• Use a canvas isolation duct connector at the supply and
return duct connection of the unit.
• Internally line the discharge and return duct within the
first 4-8 feet of unit with acoustic insulation. Install an
internally lined ‘L’ shaped return duct elbow at return
grille. Face the elbow away from adjacent units.
• Always install at least one 90° elbow in the discharge duct to
eliminate line of sight noise transmission of the blower.
• Use turning vanes at all elbows and tees to reduce turbulence.
• Limit supply duct velocities to less than 1,000 fpm
• Design and install ductwork as stiff as possible
• Allow 3 duct diameters both up and down stream of the unit
before any fittings or transitions are installed.
• Use duct sealant on all duct joints.
• Install a short (2-4’) of flex duct on all branch ducts just prior to
discharge boot or diffuser to reduce vibration and duct sound
prior to delivery in the room.
• Locate the branch duct balancing damper as far away from the
diffuser as possible.
• In ceiling plenum systems, install an internally lined ‘L’ shaped
return duct elbow at unit. Face the elbow away from adjacent
units (horizontal).
Acoustical Considerations and Equipment
Sound Performance
Sound Performance
The Arbor Series is third party sound rated in accordance with ARI
260. Please consult the Sound Performance Data Catalog for
details on the AHRI standard and sound performance data.
Recommendations for Noise Reduction
Horizontal Unit Location
• Specify equipment with quietest sound power ratings
• Do not locate units above areas with a required NC 40 or less
• Space WSHP at least 10 ft (3m) apart to avoid noise
summing of multiple units in a space.
• Maximize the height of the unit above the eiling (horizontal).
• Suspend unit with isolation grommets that are
appropriately rated to reduce vibrations (horizontal).
Vertical Unit Location
• Specify equipment with quietest sound power ratings
• Space WSHP at least 10 ft (3m) apart to avoid noise summing of
multiple units in a space.
• Acoustic ceiling coatings can greatly reduce noise levels
in mechanical rooms.
• Mount unit on a sound absorbing pad, extruded polystyrene,
rubber or cork pad.
31
ARBOR SERIES SPECIFICATION CATALOG
Vertical Dimensional Data
Standard filter rails for
open return applications
Field installed
duct flange
Deluxe filter rack for
ductable return applications
A
A
N
S
R
Air coil
N
Q
P
B
AIR COIL SIDE
AIR COIL SIDE
Q
P
4
G
3
F
ACCESS
PANEL
B
2' (61 cm)
Alternate
Service Access
4
FRONT
FRONT
1.4 in (3.5 cm)
M
G
3
F
1.4 in (3.5 cm)
M
Top View - Right Return
Top View - Left Return
2' (61 cm)
Service Access Left Return
(Right Return opposite side)
Isometric View - Left Return
T
U
W
Air coil
Air coil
ACCESS
PANEL
ACCESS
PANEL
V
C
C
1.6 in (4.1 cm)
Condensate 3/4 in
PVC glue socket
1.6 in (4.1 cm)
H
E
D
5
6
2
8
1
Front View - Right Return
L
J
Power supply
1 in (25.4 mm)
knockout
Condensate
3/4 in PVC
glue socket
Low voltage
1/2" (12.7 mm)
knockout
1.6 in (4.1 cm)
8
7
L
K
1.6 in
(4.1 cm)
5
6
2
8
1
Front View - Left Return
32
E
H
J
ACCESS
PANEL
8
7
L
K L
D
Right View - Right Return
Left View - Left Return
ARBOR SERIES SPECIFICATION CATALOG
Vertical Dimensional Data cont.
Overall Cabinet
Vertical
Models
009-012
015-018
024-030
036
041
042-048
060
070
A
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
Vertical
Models
009-012
015-018
024-030
036
041
042-048
060
070
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
B
C
1
2
3
D
E
F
Width
Depth
Height**
In
Out
22.5
57.2
22.5
57.2
22.5
57.2
22.5
57.2
22.5
57.2
25.5
64.8
25.5
64.8
25.5
64.8
22.2
56.4
22.2
56.4
26.2
66.5
26.2
66.5
26.2
66.5
31.2
79.2
31.2
79.2
31.2
79.2
23.7
60.2
36.2
91.9
40.2
102.1
44.2
112.3
44.2
112.3
44.2
112.3
48.2
122.4
52.2
132.6
2.6
6.6
2.6
6.6
2.6
6.6
2.6
6.6
2.6
6.6
2.6
6.6
2.6
6.6
2.6
6.6
5.6
14.2
7.6
19.3
7.6
19.3
7.6
19.3
7.6
19.3
7.6
19.3
7.6
19.3
7.6
19.3
M
Filter Rack
Width
2.2
5.6
2.2
5.6
2.2
5.6
2.2
5.6
2.2
5.6
2.2
5.6
2.2
5.6
2.2
5.6
N
Supply
Width
10.0
25.4
14.0
35.6
14.0
35.6
14.0
35.6
18.0
45.7
18.0
45.7
18.0
45.7
18.0
45.7
Water Connections
4
5
HWG
In
N/A
N/A
1.4
3.6
1.4
3.6
1.4
3.6
1.4
3.6
1.4
3.6
1.4
3.6
1.4
3.6
Discharge Connection
duct flange installed (±0.10 in)
P
Q
R
Supply
Depth
10.0
6.1
9.4
25.4
15.5
23.9
14.0
4.1
4.3
35.6
10.4
10.9
14.0
6.1
4.5
35.6
15.5
11.4
14.0
6.1
4.5
35.6
15.5
11.4
18.0
4.1
3.9
45.7
10.4
9.9
18.0
6.6
4.6
45.7
16.8
11.7
18.0
6.6
4.6
45.7
16.8
11.7
18.0
6.6
4.6
45.7
16.8
11.7
G
HWG Out
N/A
N/A
2.9
7.4
4.4
11.2
4.4
11.2
2.9
7.4
4.4
11.2
4.4
11.2
4.4
11.2
Electrical Knockouts
6
7
8
H
Loop
Condensate
8.8
22.4
10.8
27.4
10.8
27.4
10.8
27.4
10.8
27.4
10.8
27.4
10.8
27.4
10.8
27.4
Water
FPT
1/2
12.7 mm
3/4
19.1 mm
3/4
19.1 mm
3/4
19.1 mm
3/4
19.1 mm
1
25.4 mm
1
25.4 mm
1
25.4 mm
S
T
9.4
23.9
7.7
19.6
7.7
19.6
7.7
19.6
3.9
9.9
6.3
16.0
6.3
16.0
6.3
16.0
2.1
5.3
2.1
5.3
2.1
5.3
2.1
5.3
2.1
5.3
1.6
4.1
1.6
4.1
1.6
4.1
Knockout
HWG Provisions
N/A
N/A
0.875
22.2 mm
0.875
22.2 mm
0.875
22.2 mm
0.875
22.2 mm
0.875
22.2 mm
0.875
22.2 mm
0.875
22.2 mm
J
K
L
1/2 in.
cond
7.4
18.8
9.4
23.9
10.1
25.7
10.1
25.7
10.1
25.7
10.1
25.7
10.1
25.7
10.1
25.7
1/2 in.
cond
3.4
8.6
5.4
13.7
6.1
15.5
6.1
15.5
6.1
15.5
6.1
15.5
6.1
15.5
6.1
15.5
1 in.
cond
5.4
13.7
7.4
18.8
8.1
20.6
8.1
20.6
8.1
20.6
8.1
20.6
8.1
20.6
8.1
20.6
Return Connection*
using deluxe filter rack (±0.10 in)
U
V
Return
Return
Depth
Height
18.1
10.0
46.0
25.4
18.1
20.0
46.0
50.8
22.1
22.1
56.1
56.1
22.1
26.1
56.1
66.3
22.1
26.1
56.1
66.3
28.1
26.0
71.4
66.0
28.1
30.0
71.4
76.2
28.1
34.0
71.4
86.4
Condensate is 3/4 in. PVC female glue socket and is switchable from side to front.
*Dimensions for return connections are for the deluxe filter rack that is suitable for ducted return applications and extends 3.25 in. [8.26 cm]
from the unit. The open filter rack, used in non-ducted returns, extends 2.2 in. [5.59 cm] from the unit.
**Discharge flange is field installed and extends 1 in. (25.4 mm) from top of cabinet.
W
1.9
4.8
1.9
4.8
1.9
4.8
1.9
4.8
1.9
4.8
2.0
5.1
2.0
5.1
2.0
5.1
11/10/09
Vertical Disconnect
When using disconnect, do not use dimension L from the
standard vertical dimensional data. Use dimension LL from the
vertical disconnect dimensional data.
Vertical Models
009-012
015-018
024-030
036
042-048
060
070
Dimensions in inches [cm]
LL
Externally Mounted
18.8 [47.8]
14.3 [36.3]
15.3 [38.9]
14.3 [36.3]
14.3 [36.3]
14.3 [36.3]
Disconnect Located on this
Side for a Right Return
Disconnect
Location
02/06/13
Alternative
Power
Location
Power
Supply
LL
1.8 in.
[4.6 cm]
33
Vertical Shown in
Left Return Configuration
ARBOR SERIES SPECIFICATION CATALOG
Horizontal Dimensional Data
1.7 in.
[5.3 cm]
Standard filter rails
1 in. [2.5 cm] knockout
0.5 in. [1.3 cm] knockout
Front
Right Return
1.7 in.
[5.3 cm]
Standard filter rails
K
CP
Left Return
Front
AP
J
E
A
AP
D
AP
RR Front View
CMP
CMP
1.7
1.7
2' (61 cm)
Service Access
Condensate
"X" PVC size
AP
E
Deluxe filter rack option shown
2.3 in. [5.8 cm]
P
N
D
K
Side Discharge
1 in. [2.5 cm]
knockout
LR Front View
L
BLOWER
OUTLET
M C
L
AP
= Alternate Service Panel
BP
= Blower Service Panel
CP
= Control Access Panel
C
M
BLOWER
OUTLET
CMP = Compressor Service Panel
H
2.1 in. [5.3 cm]
A
Right Return
End Discharge
Left Return
End Discharge
N
0.5 in. [1.3 cm]
knockout
K
AP
M
BLOWER
OUTLET
J
BP
M
AP
CMP
L
Left Return Side Discharge
Right Return Side Discharge
Q
P
BLOWER
OUTLET
Front
Front
1 in. [2.5 cm]
knockout
K
J
0.5 in. [1.3 cm]
knockout
CMP
Air Coil
N
1.5 in. [3.8 cm]
1.5 in. [3.8 cm]
L
BP
Deluxe filter rack option shown
P
N
2.3 in.
[5.8 cm]
Legend
2.1 in. [5.3 cm]
A
P
Condensate
"X" PVC size
End Discharge
FILTER RACK
AIR COIL SIDE
FILTER RACK
AIR COIL SIDE
0.5 in. [1.3 cm]
knockout
CP
Side Discharge
End Discharge
H
2' (61 cm)
Service Access
J
T
T
S
S
Air Coil
Q
Deluxe filter
rack option
(shown)
C
FILTER RACK CONNECTION
R
C
R
FILTER RACK CONNECTION
Front
Front
B
B
Right Return Side View
Left Return Side View
34
ARBOR SERIES SPECIFICATION CATALOG
Horizontal Dimensional Data cont.
Water Connections
2
3
E
H
CondOut
ensate
4.8
0.8
12.2
2.0
6.8
0.8
17.3
2.0
6.8
0.8
17.3
2.0
6.8
0.8
17.3
2.0
6.8
0.8
17.3
2.0
6.8
0.8
17.3
2.0
6.8
0.8
17.3
2.0
Overall Cabinet
Horizontal
Models
009-012
015-023
024-030
036
042-048
060
070
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
in.
cm.
Horizontal
Models
009-012
015-023
024-030
036
042-048
060
070
A
B
C
1
D
Width
Depth
Height*
In
19.2
48.8
22.5
57.2
22.5
57.2
22.5
57.2
25.5
64.8
25.5
64.8
25.5
64.8
30.9
78.5
42.0
106.7
42.0
106.7
45.0
114.3
48.0
121.9
53.0
134.6
61.0
154.9
11.9
30.2
17.2
43.7
19.2
48.8
19.2
48.8
21.2
53.8
21.2
53.8
21.2
53.8
1.8
4.6
1.8
4.6
1.8
4.6
1.8
4.6
1.8
4.6
1.8
4.6
1.8
4.6
L
Discharge Connection
duct flange installed (±0.10 in)
M
N
Supply Width Supply Depth
8.0
10.0
Electrical Knockouts
J
K
1/2 in. cond
1 in. cond
Power
Low Voltage
Supply
4.5
4.5
11.4
11.4
7.1
7.1
18.0
18.0
9.2
7.1
23.4
18.0
9.2
7.1
23.4
18.0
9.2
9.1
23.4
23.1
9.2
9.1
23.4
23.1
9.2
9.1
23.4
23.1
Loop
Water FPT
1/2
12.7 mm
3/4
19.05 mm
3/4
19.05 mm
3/4
19.05 mm
1
25.4 mm
1
25.4 mm
1
25.4 mm
Return Connection*
using deluxe filter rack option (±0.10 in)
Q
R
S
T
Return Depth Return Height
15.4
9.4
3.0
1.4
P
2.3
PVC Size
X
in.
2.3
cm.
5.8
20.3
25.4
5.8
39.1
23.9
7.6
3.6
1.3
in.
5.7
10.5
9.4
4.9
23.4
14.5
2.0
1.4
3/4
cm.
14.5
26.7
23.9
12.4
59.4
36.8
5.1
3.6
1.9
in.
6.7
10.5
9.4
4.9
27.4
16.4
2.0
1.5
3/4
cm.
17.0
26.7
23.9
12.4
69.6
41.7
5.1
3.8
1.9
in.
6.7
10.5
9.4
4.9
30.4
16.4
2.1
1.5
3/4
cm.
17.0
26.7
23.9
12.4
77.2
41.7
5.3
3.8
1.9
in.
4.9
13.6
13.2
4.6
35.4
18.6
2.4
1.5
3/4
cm.
12.4
34.5
33.5
11.7
89.9
47.2
6.1
3.8
1.9
in.
4.9
13.6
13.2
4.6
40.4
18.4
2.4
1.5
3/4
cm.
12.4
34.5
33.5
11.7
102.6
46.7
6.1
3.8
1.9
in.
4.9
13.6
13.2
4.6
45.6
18.6
2.3
1.5
3/4
cm.
12.4
34.5
33.5
11.7
115.8
47.2
5.8
3.8
1.9
10/29/13
*Dimensions for return connections are for the deluxe filter rack that is suitable for ducted return applications and extends 3.25 in. [8.26 cm]
from the unit. The open filter rack, used in non-ducted returns, extends 2.2 in. [5.59 cm] from the unit.
Condensate 3/4 in. PVC stub extends from cabinet approximately 1-1/2 in. [38.1 mm]
1/2
Horizontal Disconnect
When using disconnect, do not use dimension K from the standard
horizontal dimensional data. Use dimension KK from the horizontal
disconnect dimensional data.
Horizontal Models
009-012
015-018
024-030
036
042-048
060
070
Dimensions in inches [cm]
KK
Externally Mounted
8.2 [20.8 ]
9.2 [23.4]
9.2 [23.4]
11.2 [28.4]
10.2 [25.9]
11.2 [28.4]
Disconnect
Location
Disconnect Located
on this Side for a
Left Return
KK
02/06/13
Power Supply
2.1 in.
[5.3 cm]
35
Horizontal Shown in
Right Return Configuration
ARBOR SERIES SPECIFICATION CATALOG
Hanger Bracket Locations
Right
D
Left
F
Compressor
Section
E
G
Air Handler
Section
C
B
Air Handler
Section
E
G
D
Compressor
Section
F
A
3/8”
Threaded Rod
(not supplied)
Vibration Isolator
Washer
Hex Nuts
(not supplied)
Bolt and
Lockwasher
Hanger Dimensions
Hanger Kit
Part Number
Model
009-012
015-023
024-030
036
042-048
060
070
in.
cm
in.
cm
in.
cm
in.
cm
in.
cm
in.
cm
in.
cm
99S500A04
99S500A04
99S500A04
99S500A04
99S500A04
99S500A04
99S500A04
Weight Distribution
Unit Hanger Dimensions
A
B
C
31.7
21.8
18.1
[80.5]
[55.4]
[46.0]
42.8
25.1
21.4
[108.6]
[63.8]
[54.4]
42.8
25.1
21.4
[108.7]
[63.8]
[54.4]
45.8
25.1
21.4
[116.3]
[63.8]
[54.4]
48.8
28.1
24.4
[124.0]
[71.4]
[62.0]
53.8
28.1
24.4
[136.7]
[71.4]
[62.0]
61.8
28.1
24.4
[157.0]
[71.4]
[62.0]
10/29/13
Model
009
012
015
018
023
024
030
036
041
042
048
060
070
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
lb.
kg
Vertical
Shipping
Weight
Horizontal
Shipping
Weight
110
[50]
115
[52]
165
[75]
170
[77]
na
na
230
[104]
240
[109]
265
[120]
275
[125]
285
[129]
290
[132]
335
[152]
380
[172]
120
[54]
125
[57]
175
[79]
180
[82]
185
[84]
245
[111]
255
[116]
285
[129]
na
na
300
[136]
310
[141]
360
[163]
405
[184]
Horizontal Weight Distribution
Front
Back
D
E
F
G
46
23
26
25
[21]
[11]
[12]
[11]
48
24
27
26
[22]
[11]
[12]
[12]
67
34
37
36
[31]
[15]
[17]
[17]
69
35
38
38
[31]
[16]
[17]
[17]
71
36
39
39
[32]
[16]
[18]
[17]
94
47
52
51
[43]
[22]
[24]
[23]
98
49
54
53
[44]
[22]
[25]
[24]
110
55
61
59
[50]
[25]
[28]
[27]
na
na
na
na
na
na
na
na
115
58
64
63
[52]
[26]
[29]
[28]
119
60
66
65
[54]
[27]
[30]
[29]
138
70
77
75
[63]
[32]
[35]
[34]
156
78
86
84
[71]
[36]
[39]
[38]
11/10/09
36
ARBOR SERIES SPECIFICATION CATALOG
Physical Data
Single Speed
Model
009
012
Compressor (1 each)
015
018
023
024
030
036
041
Rotary
042
048
060
070
Scroll
Factory Charge R-410A, oz [kg] Vertical
26 [0.74]
32 [0.91]
38 [1.08]
40 [1.13]
n/a
46 [1.30]
54 [1.53]
56 [1.59]
54 [1.53]
68 [1.93]
76 [2.15]
88 [2.49]
92 [2.61]
Factory Charge R-410A, oz [kg] Horizontal
24 [0.68]
26 [0.74]
38 [1.08]
40 [1.13]
46 [1.30]
46 [1.30]
56 [1.59]
60 [1.70]
n/a
68 [1.93]
76 [2.15]
88 [2.49]
88 [2.49]
1/2 [373]
1/2 [373]
1/2 [373]
1/2 [373]
1 [746]
1 [746]
Blower Motor & Blower
VS
ECM
Not Available
Variable Speed
PSC
4 Speeds
3 Speeds
5-Spd
ECM
Not Available
5 Speeds
VS
ECM
Not Available
Blower Motor Type/Speeds
Blower Motor- hp [W]
PSC
5-Spd
ECM
1/10 [75]
1/2 [373]
1/10 [75]
Not Available
1/2 [373]
Blower Wheel Size (Dia x W),
in. [mm]
PSC
5-Spd
ECM
1/2 [373]
1/6 [134]
1/6 [134]
1/5 [149]
1/5 [149]
1/3 [249]
1/2 [373]
1/2 [373]
1/2 [373]
1/2 [373]
1 [746]
1 [746]
1/2 [373]
1/2 [373]
1/2 [373]
1/2 [373]
1/2 [373]
1 [746]
1 [746]
1 [746]
1 [746]
1 [746]
1 [746]
1 [746]
Not Available
PSC
VS
ECM
1/2 [373]
1/2 [373]
VS
ECM
Optional - Oversized Blower
Motor - hp [W]
1/2 [373]
Not Available
3/4 [560]
3/4 [560]
9x7
9x7
9x7
9x7
9x7
9x7
[229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178]
10 x 10
[254 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
6x8
6x8
9x7
9x7
9x7
9x7
9x7
9x7
[152 x 203] [152 x 203] [229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178]
10 x 10
[254 x 254]
10 x 10
[254 x 254]
10 x 10
[254 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
9x7
9x7
9x7
9x7
9x7
9x7
[229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178] [229 x 178]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
1/2 [12.7] 1/2 [12.7] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1] 3/4 [19.1]
1 [25.4]
1 [25.4]
1 [25.4]
1 [25.4]
Not Available
Not Available
1/3 [249]
1/2 [373]
Not Available
Not Available
Not Available
Coax and Water Piping
Water Connection Size - FPT - in. [mm]
HWG Connection Size - FPT - in. [mm]
(Vertical Only)
Coax & Piping Water Volume - gal [l]
Not Available
1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7] 1/2 [12.7]
0.26 [0.98]
0.3 [1.12] 0.4 [1.49] 0.4 [1.49] 0.4 [1.49] 0.4 [1.49]
0.75 [2.83]
0.9 [3.41] 0.9 [3.41] 0.9 [3.41]
1.25 [4.72]
1.5 [5.68] 1.5 [5.68]
12 x 16
[305 x 406]
12 x 16
[305 x 406]
24 x 20
[610 x 508]
28 x 20
[711 x 508]
28 x 25
[711 x 635]
32 x 25
[813 x 635]
Vertical
Air Coil Dimensions (H x W), in. [mm]
Air Coil Total Face Area, ft2 [m2]
22 x 16
[559 x 406]
n/a
24 x 20
[610 x 508]
28 x 20
[711 x 508]
28 x 25
[711 x 635]
36 x 25
[914 x 635]
2.4 [0.220]
n/a
3.3 [0.310] 3.3 [0.310]
3.9 [0.362]
3.9 [0.362]
4.9 [0.452]
4.9 [0.452]
5.6 [0.516] 6.3 [0.581]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
n/a
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3
3
3
3
n/a
3
3
3
3
3
3
3
3
Filter Standard - 1 in. [25mm] MERV4
Throwaway, in. [mm]
12 x 20
[305 x 508]
12 x 20
[305 x 508]
22 x 20
[559 x 508]
22 x 20
[559 x 508]
n/a
24 x 24
24 x 24
28 x 24
[610 x 610] [610 x 610] [711 x 610]
28 x 24
[711 x 610]
28 x 30
[711 x 762]
28 x 30
32 x 30
36 x 30
[711 x 762] [813 x 762] [914 x 762]
Filter Standard - 2 in. [51mm] Pleated
MERV13 Throwaway, in. [mm]
12 x 20
[305 x 508]
12 x 20
[305 x 508]
22 x 20
[559 x 508]
22 x 20
[559 x 508]
n/a
24 x 24
24 x 24
28 x 24
[610 x 610] [610 x 610] [711 x 610]
28 x 24
[711 x 610]
28 x 30
[711 x 762]
28 x 30
32 x 30
36 x 30
[711 x 762] [813 x 762] [914 x 762]
10 x 16
[254 x 406]
10 x 16
[254 x 406]
16 x 23
[406 x 584]
16 x 23
[406 x 584]
16 x 23
[406 x 584]
18 x 30
[457 x 762]
n/a
20 x 35
[508 x 889]
20 x 35
[508 x 889]
1.1 [0.103] 1.1 [0.103] 2.6 [0.238] 2.6 [0.238] 2.6 [0.238] 3.4 [0.316] 3.4 [0.316] 3.9 [0.362]
Air Coil Tube Size, in. [mm]
Air Coil Number of rows
1.3 [0.121] 1.3 [0.121] 2.4 [0.220]
22 x 16
[559 x 406]
Horizontal
Air Coil Dimensions (H x W), in. [mm]
Air Coil Total Face Area, ft2 [m2]
Air Coil Tube Size, in. [mm]
Air Coil Number of rows
18 x 27
[457 x 686]
18 x 27
[457 x 686]
20 x 40
20 x 45
[508 x 1016] [508 x 1143]
n/a
4.9 [0.452]
4.9 [0.452] 5.6 [0.516] 6.3 [0.581]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
n/a
3/8 [9.5]
3/8 [9.5]
3/8 [9.5]
3
3
3
3
3
3
3
3
n/a
3
3
3
3
n/a
2 - 18 x 20
[457 x 508]
2 - 18 x 20
[457 x 508]
1 - 20 x 20
[508 x 508]
1 - 20 x 22
[508 x 559]
1 - 20 x 25
[508 x 635]
1 - 20 x 22
[508 x 559]
n/a
20 x 37
[686 x 940]
20 x 37
[686 x 940]
1 - 20 x 20
[508 x 508]
1 - 20 x 22
[508 x 559]
1 - 20 x 25
[508 x 635]
1 - 20 x 22
[508 x 559]
Filter Standard - 1 in. [25mm] MERV 4
Throwaway, in. [mm]
11 x 17
[279 x 432]
11 x 17
[279 x 432]
16 x 25
[406 x 635]
16 x 25
[406 x 635]
16 x 25
[406 x 635]
2 - 18 x 14
[457 x 356]
2 - 18 x 14
[457 x 356]
1 - 18 x 14
[457 x 356]
1 - 18 x 18
[457 x 457]
Filter Standard - 2 in. [51mm] Pleated
MERV 13 Throwaway, in. [mm]
11 x 17
[279 x 432]
11 x 17
[279 x 432]
16 x 25
[406 x 635]
16 x 25
[406 x 635]
16 x 25
[406 x 635]
18 x 29
[457 x 737]
18 x 29
[457 x 737]
18 x 32
[457 x 813]
3/8 [9.5]
10/23/13
37
ARBOR SERIES SPECIFICATION CATALOG
Electrical Availability
PSC
Voltage
Static
Option
208-230/60/1
Single Speed Models
009
012
015
018
023
024
030
036
041
042
048
060
070
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
208-230/60/1 w/GeoStart
265-277/60/1
208-230/60/3 (also w/GeoStart)
Standard
•
•
•
460/60/3 (also w/GeoStart)
575/60/3
208-230/60/1
•
•
•
•
208-230/60/1 w/GeoStart
•
•
•
•
265-277/60/1
•
•
•
•
•
•
•
•
•
•
•
•
208-230/60/3 (also w/GeoStart)
High
460/60/3 (also w/GeoStart)
575/60/3
01/22/13
Variable Speed ECM
Voltage
Static
Option
Single Speed Models
009
012
015
018
023
024
030
036
041
042
048
060
070
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
208-230/60/1
•
•
208-230/60/1 w/GeoStart
•
•
•
•
•
•
208-230/60/1
208-230/60/1 w/GeoStart
265-277/60/1
208-230/60/3 (also w/GeoStart)
•
Standard
460/60/3 (also w/GeoStart)
575/60/3
265-277/60/1
208-230/60/3 (also w/GeoStart)
High
460/60/3 (also w/GeoStart)
575/60/3
01/22/13
5-Speed ECM
Voltage
Static
Option
208-230/60/1
208-230/60/1 w/GeoStart
265-277/60/1
208-230/60/3 (also w/GeoStart)
Single Speed Models
009
012
015
018
023
024
030
036
041
042
048
060
070
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard
460/60/3 (also w/GeoStart)
575/60/3
01/22/13
38
ARBOR SERIES SPECIFICATION CATALOG
Electrical Data
PSC Motor
Model
009
012
015
018
023
024
024*
030
030*
036
041
042
042*
048
048*
060
070
LRA**
Blower
Motor
FLA
Total
Unit
FLA
Min
Circ
Amp
Max
Fuse/
HACR
n/a
n/a
n/a
n/a
n/a
n/a
13.4
n/a
23.3
n/a
33.0
16.8
23.3
n/a
33.0
16.8
23.3
n/a
33.0
16.8
29.2
n/a
34.8
16.8
29.2
n/a
34.8
16.8
38.7
n/a
57.0
27.0
46.0
57.0
27.0
n/a
46.0
57.0
27.0
n/a
46.0
57.0
27.0
n/a
46.0
69.0
30.0
46.0
69.0
30.0
n/a
60.0
72.0
42.0
n/a
58.0
72.0
42.0
n/a
0.6
0.6
0.6
0.6
1.1
1.0
1.1
1.0
1.2
1.1
1.2
0.6
1.2
1.1
1.2
0.6
1.5
1.5
1.5
1.0
1.5
1.5
1.5
1.0
2.2
2.0
2.2
1.1
2.2
1.1
2.2
1.1
3.5
3.5
1.8
1.4
3.5
3.5
1.8
1.4
4.6
4.6
2.3
1.9
3.5
3.5
1.8
4.6
4.6
2.3
1.9
5.9
5.9
3.0
1.9
5.9
5.9
3.0
1.9
4.7
4.9
5.5
5.1
7.0
6.0
7.8
6.6
14.7
10.1
8.3
4.1
14.7
10.1
8.3
4.1
15.0
10.5
8.6
4.5
15.6
12.7
10.4
5.2
16.3
13.2
11.1
5.3
19.5
13.3
15.0
7.5
23.5
16.3
8.2
6.8
23.5
16.3
8.2
6.8
24.6
17.4
8.7
7.3
24.5
19.5
9.5
25.6
20.6
10.0
8.3
32.3
23.5
11.3
9.3
36.0
23.2
12.6
9.9
5.7
6.0
6.7
6.2
8.5
7.2
9.5
8.0
18.1
12.4
10.1
5.0
18.1
12.4
10.1
5.0
18.4
12.8
10.4
5.4
19.1
15.5
12.6
6.3
19.8
16.0
13.3
6.4
23.8
16.3
18.2
9.1
28.5
19.5
9.8
8.2
28.5
19.5
9.8
8.2
29.6
20.6
10.3
8.7
29.8
23.5
11.4
30.9
24.6
11.9
9.9
38.8
27.9
13.4
11.2
43.5
27.5
15.0
11.9
10/15
10/15
10/15
10/15
10/15
10/15
15
10/15
30
20
15
10/15
30
20
15
10/15
30
20
15
10/15
30
25
20
10/15
30
25
20
10/15
40
20
30
15
45
30
15
10/15
45
30
15
10/15
45
30
15
10/15
50
35
15
50
40
15
15
60
45
20
15
70
40
20
15
Compressor
Rated
Voltage
Voltage
Min/Max
MCC
RLA
LRA
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
208-230/60/1
208-230/60/3
460/60/3
575/60/3
187/253
238/292
187/253
238/292
187/253
238/292
187/253
238/292
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
187/253
414/506
517/633
187/253
187/253
414/506
517/633
187/253
187/253
414/506
517/633
187/253
187/253
414/506
187/253
187/253
414/506
517/633
187/253
187/253
414/506
517/633
187/253
187/253
414/506
517/633
6.4
6.7
7.7
7.0
9.2
7.8
10.4
8.7
21.0
14.0
11.0
5.5
21.0
14.0
11.0
5.5
21.0
14.0
11.0
5.5
22.0
17.5
13.9
6.5
22.0
17.5
13.9
6.5
27.0
19.0
20.0
10.0
31.0
20.0
10.0
8.5
31.0
20.0
10.0
8.5
31.0
20.0
10.0
8.5
32.0
25.0
12.0
32.0
25.0
12.0
10.0
41.0
27.5
13.0
11.5
47.0
28.0
15.0
12.5
4.1
4.3
4.9
4.5
5.9
5.0
6.7
5.6
13.5
9.0
7.1
3.5
13.5
9.0
7.1
3.5
13.5
9.0
7.1
3.5
14.1
11.2
8.9
4.2
14.1
11.2
8.9
4.2
17.3
12.2
12.8
6.4
20.0
12.8
6.4
5.4
20.0
12.8
6.4
5.4
20.0
12.8
6.4
5.4
21.0
16.0
7.7
21.0
16.0
7.7
6.4
26.3
17.6
8.3
7.4
30.1
17.3
9.6
8.0
21.0
22.0
25.0
22.0
29.0
28.0
33.5
28.0
58.3
54.0
55.0
28.0
58.3
54.0
55.0
28.0
58.3
54.0
55.0
28.0
73.0
60.0
58.0
28.0
73.0
60.0
58.0
28.0
96.7
72.0
95.0
45.0
115.0
95.0
45.0
38.0
115.0
95.0
45.0
38.0
115.0
95.0
45.0
38.0
115.0
115.0
50.0
115.0
115.0
50.0
40.0
150.0
120.0
70.0
53.0
145.0
120.0
70.0
53.0
05/21/13
HACR circuit breaker in USA only
* With optional high-static PSC motor
** With optional GeoStartTM
NOTE: High-static option not available on all model sizes.
39
ARBOR SERIES SPECIFICATION CATALOG
Electrical Data cont.
5-Speed ECM Motor
Model
015
018
023
024
030
036
041
042
048
060
070
Compressor
Rated Voltage
Voltage
Min/Max
MCC
RLA
LRA
LRA**
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
187/253
238/292
187/253
238/292
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
9.2
7.8
10.4
8.7
21.0
14.0
11.0
5.5
21.0
14.0
11.0
5.5
22.0
17.5
13.9
6.5
27.0
19.0
20.0
10.0
31.0
20.0
10.0
31.0
20.0
10.0
32.0
25.0
12.0
41.0
27.5
13.0
47.0
28.0
15.0
5.9
5.0
6.7
5.6
13.5
9.0
7.1
3.5
13.5
9.0
7.1
3.5
14.1
11.2
8.9
4.2
17.3
12.2
12.8
6.4
20.0
12.8
6.4
20.0
12.8
6.4
21.0
16.0
7.7
26.3
17.6
8.3
30.1
17.3
9.6
29.0
28.0
33.5
28.0
58.3
54.0
55.0
28.0
58.3
54.0
55.0
28.0
73.0
60.0
58.0
28.0
96.7
72.0
95.0
45.0
115.0
95.0
45.0
115.0
95.0
45.0
115.0
115.0
50.0
150.0
120.0
70.0
145.0
120.0
70.0
n/a
n/a
13.4
n/a
23.3
n/a
33.0
16.8
23.3
n/a
33.0
16.8
29.2
n/a
34.8
16.8
38.7
n/a
57.0
27.0
46.0
57.0
27.0
46.0
57.0
27.0
46.0
69.0
30.0
60.0
72.0
42.0
58.0
72.0
42.0
HACR circuit breaker in USA only
** With optional GeoStartTM
40
Blower
Motor
FLA
4.1
3.6
4.1
3.6
4.1
3.6
4.1
2.1
4.1
3.6
4.1
2.1
4.1
3.6
4.1
2.1
4.1
3.6
4.1
2.1
7.6
7.6
4.0
7.6
7.6
4.0
7.6
7.6
4.0
7.6
7.6
4.0
7.6
7.6
4.0
Total
Unit
FLA
10.0
8.6
10.8
9.2
17.6
12.6
11.2
5.6
17.6
12.6
11.2
5.6
18.2
14.8
13.0
6.3
21.4
15.8
16.9
8.5
27.6
20.4
10.4
27.6
20.4
10.4
28.6
23.6
11.7
33.9
25.2
12.3
37.7
24.9
13.6
Min
Circ
Amp
11.5
9.9
12.5
10.6
21.0
14.9
13.0
6.5
21.0
14.9
13.0
6.5
21.7
17.6
15.2
7.4
25.7
18.9
20.1
10.1
32.6
23.6
12.0
32.6
23.6
12.0
33.9
27.6
13.6
40.5
29.6
14.4
45.2
29.2
16.0
Max
Fuse/
HACR
15
10/15
15
15
30
20
20
10/15
30
20
20
10/15
35
25
20
10/15
40
30
30
15
50
30
15
50
30
15
50
40
20
60
45
25
70
45
25
05/21/13
ARBOR SERIES SPECIFICATION CATALOG
Electrical Data cont.
Variable Speed ECM Motor
Model
015
018
023
024
030
036
041
042
042*
048
048*
060
070
Compressor
Rated
Voltage
Voltage
Min/Max
MCC
RLA
LRA
LRA**
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
265/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
208-230/60/1
208-230/60/3
460/60/3
187/253
238/292
187/253
238/292
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
238/292
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
187/253
187/253
414/506
9.2
7.8
10.4
8.7
21.0
14.0
11.0
5.5
21.0
14.0
11.0
5.5
22.0
17.5
13.9
6.5
27.0
19.0
20.0
10.0
31.0
20.0
10.0
31.0
20.0
10.0
31.0
20.0
10.0
32.0
25.0
12.0
32.0
25.0
12.0
41.0
27.5
13.0
47.0
28.0
15.0
5.9
5.0
6.7
5.6
13.5
9.0
7.1
3.5
13.5
9.0
7.1
3.5
14.1
11.2
8.9
4.2
17.3
12.2
12.8
6.4
20.0
12.8
6.4
20.0
12.8
6.4
20.0
12.8
6.4
21.0
16.0
7.7
21.0
16.0
7.7
26.3
17.6
8.3
30.1
17.3
9.6
29.0
28.0
33.5
28.0
58.3
54.0
55.0
28.0
58.3
54.0
55.0
28.0
73.0
60.0
58.0
28.0
96.7
72.0
95.0
45.0
115.0
95.0
45.0
115.0
95.0
45.0
115.0
95.0
45.0
115.0
115.0
50.0
115.0
115.0
50.0
150.0
120.0
70.0
145.0
120.0
70.0
n/a
n/a
13.4
n/a
23.3
n/a
33.0
16.8
23.3
n/a
33.0
16.8
29.2
n/a
34.8
16.8
38.7
n/a
57.0
27.0
46.0
57.0
27.0
46.0
57.0
27.0
46.0
57.0
27.0
46.0
69.0
30.0
46.0
69.0
30.0
60.0
72.0
42.0
58.0
72.0
42.0
HACR circuit breaker in USA only
* With optional 1 HP ECM motor
** With optional GeoStartTM
Blower
Motor
FLA
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.1
4.0
4.0
4.1
4.0
4.0
4.1
7.0
7.0
6.9
4.0
4.0
4.1
7.0
7.0
6.9
7.0
7.0
6.9
7.0
7.0
6.9
Total
Unit
FLA
9.9
9.1
10.7
9.7
17.5
13.1
11.1
7.6
17.5
13.1
11.1
7.6
18.1
15.3
12.9
8.3
21.3
16.3
16.8
10.5
24.0
16.8
10.5
24.0
16.8
10.5
27.0
19.8
13.3
25.0
20.0
11.8
28.0
23.0
14.6
33.3
24.6
15.2
37.1
24.9
16.5
Min
Circ
Amp
11.4
10.3
12.4
11.1
20.9
15.4
12.9
8.5
20.9
15.4
12.9
8.5
21.6
18.1
15.1
9.4
25.6
19.3
20.0
12.1
29.0
20.0
12.1
29.0
20.0
12.1
32.0
23.0
14.9
30.3
24.0
13.7
33.3
27.0
16.5
39.9
29.0
17.3
44.6
29.4
18.9
Max
Fuse/
HACR
15
15
15
15
30
20
15
10/15
30
20
15
10/15
35
25
20
10/15
40
30
30
15
45
30
15
45
30
15
50
35
20
50
40
20
50
40
20
60
45
25
70
45
25
05/21/13
CAUTION: When installing a unit with a variable speed ECM blower motor in 460/60/3 voltage, a neutral wire is required to allow proper
unit operation.
41
ARBOR SERIES SPECIFICATION CATALOG
Blower Performance Data
Standard PSC Motor
Model
009
012
015
018
023
024
030
036
041
042
048
060
070
Blower
Spd
H
MH
ML*
L
H
MH*
ML
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
H
M
L
Blower
Size
Motor
hp
6x8
1/10
6x8
1/10
9x7
1/6
9x7
1/6
9x7
1/5
9x7
1/5
9x7
1/3
9x7
1/2
10x10
1/2
10 x 10
1/2
10 x 10
1/2
11 x 10
1
11 x 10
1
0
530
475
435
370
530
475
435
370
875
760
630
875
760
630
1020
960
720
1065
880
805
1240
1095
860
1360
1205
1070
1655
1470
1150
1705
1485
1180
1930
1580
1180
2360
2165
1965
2450
2215
2005
0.05
515
460
420
355
515
460
420
355
860
750
620
860
750
620
990
840
700
1045
865
790
1220
1085
860
1340
1190
1060
1635
1455
1140
1685
1475
1165
1910
1565
1170
2330
2130
1940
2435
2190
1990
0.10
500
450
410
340
500
450
410
340
845
740
610
845
740
610
960
820
680
1030
850
780
1200
1080
855
1320
1170
1050
1615
1445
1130
1665
1465
1150
1885
1550
1160
2300
2095
1920
2420
2170
1975
0.15
485
435
395
325
485
435
395
325
830
730
600
830
730
600
930
800
650
1005
830
765
1175
1060
850
1290
1145
1035
1590
1425
1110
1645
1445
1135
1860
1535
1140
2270
2070
1900
2395
2155
1960
0.20
470
420
380
310
470
420
380
310
820
720
590
820
720
590
900
780
640
975
815
745
1150
1045
850
1260
1120
1020
1570
1410
1090
1625
1430
1120
1830
1525
1120
2240
2050
1885
2370
2140
1950
Airflow (cfm) at External Static Pressure (in. wg)
0.25
0.30
0.35
0.40
0.45
0.50
450
430
405
385
355
330
405
385
365
345
320
300
365
345
325
300
290
275
450
430
405
385
355
330
405
385
365
345
320
300
365
345
325
300
290
275
805
790
770
750
725
700
710
700
680
660
640
620
580
570
560
550
520
490
805
790
770
750
725
700
710
700
680
660
640
620
580
570
560
550
520
490
870
850
830
800
770
690
760
740
720
690
670
620
600
580
570
550
950
925
900
870
835
800
795
775
750
725
700
670
725
710
685
660
630
600
1110
1080
1055
1030
975
920
1020
995
960
925
885
850
845
845
825
805
775
750
1220
1185
1130
1080
1045
1010
1085
1050
1015
980
940
900
995
970
940
910
875
840
1535
1500
1425
1350
1270
1185
1380
1350
1285
1240
1205
1170
1050
1010
970
930
900
865
1595
1565
1530
1500
1450
1405
1410
1390
1350
1315
1260
1210
1090
1060
1030
1000
965
920
1790
1750
1710
1665
1620
1580
1505
1485
1445
1410
1310
1215
1100
1080
1050
1020
970
930
2215
2190
2160
2130
2095
2060
2030
2010
1985
1965
1930
1900
1870
1855
1825
1800
1780
1760
2340
2310
2280
2250
2225
2200
2120
2095
2070
2045
2015
1990
1940
1925
1910
1890
1865
1845
0.60
840
785
680
910
845
780
1080
905
800
1260
1110
855
1280
1130
875
1985
1850
1720
2040
1940
1780
0.70
730
675
855
970
1140
1010
1235
1030
1920
1775
1625
2000
1876
1710
0.80
1855
1700
1530
1950
1795
1565
0.90
-
1.00
7/6/10
Factory settings are in Bold
Airflow values are with dry coil and standard filter
For wet coil performance first calculate the face velocity of the air coil (Face Velocity [fpm] = Airflow [cfm] / Face Area [sq ft]).
Then for velocities of 200 fpm reduce the static capability by 0.03 in. wg, 300 fpm by 0.08 in. wg, 400 fpm by 0.12in. wg. and 500 fpm by 0.16 in. wg.
Optional High Static PSC Motor
Model
0
0.05
0.10
0.15
0.20
Airflow (cfm) at External Static Pressure (in. wg)
0.25
0.30
0.35
0.40
0.45
0.50
0.60
0.70
0.80
0.90
1.00
1240
1220
1200
1175
1150
1110
1080
1055
1030
975
920
840
730
-
-
-
1095
1085
1080
1060
1045
1020
995
960
925
885
850
785
675
-
-
-
L
860
860
855
850
850
845
845
825
805
775
750
680
-
-
-
-
H
1340
1320
1300
1270
1240
1200
1160
1115
1070
1025
985
880
-
-
-
-
Blower
Spd
Blower
Size
Motor
hp
H
024
030
042
M
9x7
1185
1175
1165
1130
1095
1065
1035
1000
965
920
880
795
-
-
-
L
1050
1040
1030
1015
1000
980
960
925
895
855
815
-
-
-
-
-
H
2095
2080
2060
2020
1980
1950
1920
1880
1840
1780
1725
1550
1335
1120
-
-
M
M
9x7
1/3
10 x 10
1/2
3/4
L
H
048
M
L
10 x 10
3/4
1960
1940
1920
1890
1865
1830
1800
1760
1725
1670
1620
1435
1300
-
-
-
1800
1780
1760
1740
1725
1695
1670
1625
1585
1525
1465
1300
1200
-
-
-
2095
2080
2060
2020
1980
1950
1920
1880
1840
1780
1725
1550
1335
1120
-
-
1960
1940
1920
1890
1865
1830
1800
1760
1725
1670
1620
1435
1300
-
-
-
1800
1780
1760
1740
1725
1695
1670
1625
1585
1525
1465
1300
1200
-
-
-
Factory settings are in Bold
Airflow values are with dry coil and standard filter
For wet coil performance first calculate the face velocity of the air coil (Face Velocity [fpm] = Airflow [cfm] / Face Area [sq ft]).
Then for velocities of 200 fpm reduce the static capability by 0.03 in. wg, 300 fpm by 0.08 in. wg, 400 fpm by 0.12in. wg. and 500 fpm by 0.16 in. wg.
* Setting for 265 V operation.
42
7/6/10
ARBOR SERIES SPECIFICATION CATALOG
Blower Performance Data cont.
5-Speed ECM Motor
Model
015
018
023
024
030
036
041
042
048
060
070
Motor
Speed
Motor
Tap
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
High
Med High
Med
Med Low
Low
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
5
4
3
2
1
Blower
Size
Motor
HP
9x7
1/2
9x7
1/2
9x7
1/2
9x7
1/2
9x7
1/2
9x7
1/2
11 x 10
1
11 x 10
1
11 x 10
1
11 x 10
1
11 x 10
1
0
0.05
0.10
0.15
0.20
915
805
725
695
655
915
805
725
695
655
980
890
830
780
625
980
890
830
780
625
1340
1130
1030
960
790
1370
1265
1160
1110
825
1840
1730
1630
1550
1380
1840
1730
1630
1550
1380
2060
1880
1790
1670
1430
2400
2180
2080
1930
1750
2400
2180
2080
1930
1750
895
785
715
675
600
895
785
715
675
600
960
878
815
760
593
960
878
815
760
593
1310
1115
1005
945
765
1345
1253
1143
1095
803
1825
1713
1610
1520
1340
1825
1713
1610
1520
1340
2045
1860
1770
1650
1405
2360
2160
2050
1920
1735
2360
2160
2050
1920
1735
880
765
700
650
550
880
765
700
650
550
940
865
800
740
560
940
865
800
740
560
1280
1100
980
930
740
1320
1240
1125
1080
780
1810
1695
1590
1490
1300
1810
1695
1590
1490
1300
2030
1840
1750
1630
1380
2330
2140
2020
1910
1720
2330
2140
2020
1910
1720
865
750
680
630
530
865
750
680
630
530
930
845
788
703
535
930
845
788
703
535
1240
1085
965
915
725
1285
1220
1113
1065
770
1790
1670
1563
1465
1275
1790
1670
1563
1465
1275
2015
1825
1730
1605
1353
2315
2130
2010
1893
1698
2315
2130
2010
1893
1698
850
740
660
610
508
850
740
660
610
508
920
825
775
665
510
920
825
775
665
510
1200
1070
950
900
710
1250
1200
1100
1050
760
1770
1645
1535
1440
1250
1770
1645
1535
1440
1250
2000
1810
1710
1580
1325
2300
2120
2000
1875
1675
2300
2120
2000
1875
1675
Airflow (cfm) at External Static Pressure (in. wg)
0.25
0.30
0.35
0.40
0.45
0.50
830
725
635
590
490
830
725
635
590
490
905
813
755
653
495
905
813
755
653
495
1170
1057
935
885
690
1220
1175
1085
1038
740
1745
1623
1513
1415
1225
1745
1623
1513
1415
1225
1970
1785
1685
1555
1303
2290
2105
1985
1863
1658
2290
2105
1985
1863
1658
815
705
615
575
475
815
705
615
575
475
890
800
735
640
480
890
800
735
640
480
1140
1044
920
870
670
1190
1150
1070
1025
720
1720
1600
1490
1390
1200
1720
1600
1490
1390
1200
1940
1760
1660
1530
1280
2285
2090
1970
1850
1640
2285
2090
1970
1850
1640
805
685
600
550
435
805
685
600
550
435
875
785
723
620
455
875
785
723
620
455
1095
1022
900
855
660
1158
1120
1055
1008
705
1700
1575
1470
1370
1175
1700
1575
1470
1370
1175
1925
1740
1640
1510
1255
2275
2075
1955
1833
1620
2275
2075
1955
1833
1620
795
665
585
525
395
795
665
585
525
395
860
770
710
600
430
860
770
710
600
430
1050
1000
880
840
650
1125
1090
1040
990
690
1680
1550
1450
1350
1150
1680
1550
1450
1350
1150
1910
1720
1620
1490
1230
2265
2060
1940
1815
1600
2265
2060
1940
1815
1600
775
655
560
490
350
775
655
560
490
350
840
753
690
585
410
840
753
690
585
410
1015
970
870
825
630
1085
1053
1020
980
670
1660
1535
1425
1330
1125
1660
1535
1425
1330
1125
1890
1705
1600
1470
1210
2250
2045
1925
1798
1583
2250
2045
1925
1798
1583
750
635
535
455
750
635
535
455
820
735
670
570
390
820
735
670
570
390
980
940
860
810
610
1045
1015
1000
970
650
1640
1520
1400
1310
1100
1640
1520
1400
1310
1100
1870
1690
1580
1450
1190
2230
2030
1910
1780
1565
2230
2030
1910
1780
1565
0.60
0.70
0.80
0.90
1.00
730
605
485
730
605
485
800
710
640
800
710
640
900
870
830
790
580
960
1600
1480
1370
1260
1030
1600
1480
1370
1260
1030
1830
1640
1550
1410
1130
2200
2000
1870
1740
1525
2200
2000
1870
1740
1525
695
535
695
535
745
665
600
745
665
600
800
780
750
740
500
1570
1440
1330
1220
980
1570
1440
1330
1220
980
1800
1610
1510
1370
1070
2165
1960
1840
1700
1490
2165
1960
1840
1700
1490
640
640
1530
1390
1290
1180
820
1530
1390
1290
1180
820
1750
1570
1460
1340
925
2110
1930
1800
1660
1450
2110
1930
1800
1660
1450
1480
1350
1480
1350
1740
1535
2080
1890
1760
1620
1410
2080
1890
1760
1620
1410
2030
1850
1720
1590
1350
2030
1850
1720
1590
1350
01/23/13
Factory settings are in Bold
Airflow values are with dry coil and standard 1 in. filter
ISO/AHRI rating point on the US*070 will require moving the red wire on the motor to high speed (tap 5) and disconnecting the tan wire from tap 5.
5-Speed ECM Motor
Connections
Setting Blower Speed - 5-Speed ECM
5-speed ECM blower motors have five (5) speeds of which
three (3) are selectable on single speed and four (4) are
selectable on dual capacity.
CAUTION: Disconnect all power before
performing this operation.
43
ARBOR SERIES SPECIFICATION CATALOG
Blower Performance Data cont.
Variable Speed ECM Motor
Model
Max
esp
015
0.50
018
0.50
023
0.50
024
0.50
030
0.50
036
0.50
041
0.50
042
0.50
042
w/1hp*
0.75
048
0.50
048
w/1hp*
0.75
060
0.75
070
0.75
1
300
L
300
2
400
400
L
400
400
400
3
500
M
500
500
L
500
L
500
L
4
600
H
600
M
600
M
600
M
600
600
650
750
650
750
800
L
650
1000
M
750
800
750
1000
L
900
800
950
850
L
850
L
1100
850
1100
1000
1100
L
950
950
1300
H
950
1300
M
1200
L
1300
5
700
Airflow DIP Switch Settings
6
7
700
H
700
8
9
10
11
12
900
1000
1100
1200
900
1000
1100
1200
1000
1100
1200
1000
1150
900
H
900
M
1250
1100
H
1375
1150
1225
1300
1475
1550
1600
1150
1250
1375
1475
1550
1600
1600
1800
1150
1600
1250
M
1800
1325
1375
1475
1550
H
1600
1600
1700
1850
H
2100
H
2000
2200
2300
2400
1750
M
1950
800
800
H
800
H
800
700
700
M
700
L
1050
M
1050
M
1500
800
1050
L
1500
H
1400
M
1500
1325
H
1325
H
2300
11/10/09
Factory settings are at recommended L-M-H DIP switch locations.
Shaded regions are recommended for best performance. It is acceptable to operate outside of this area as long as the WSHP operates within the guidlines of the Operating Limits table and Correction Factor tables.
Lowest and Highest DIP switch settings are assumed to be L and H respectively.
CFM is controlled within ±5% up to the maximum esp.
Max esp includes allowance for wet coil and standard filter
44
ARBOR SERIES SPECIFICATION CATALOG
Blower Performance Data cont.
Setting Blower Speed - Variable Speed ECM
Variable Speed ECM Setup with an AID Tool cont.
The ABC board’s Yellow Config LED will flash the current variable
speed ECM blower speed selections for low, med, and high
continuously with a short pause in between. The speeds can
also be confirmed with the AID Tool under the Setup/ECM Setup
screen. The variable speed ECM blower motor speeds can be field
adjusted with or without using an AID Tool.
ECM SPEED INFO
LOW SPEED: 3
MED SPEED: 5
HIGH SPEED: 7
Selecting YES will enter variable
speed ECM speed setup, while
selecting NO will return to the previous
screen.
Variable Speed ECM Setup without an AID Tool
The blower speeds for Low (G only), Med (Y1), and High (Y2/Aux)
can be adjusted directly at the Aurora ABC board which utilizes the
push button (SW1) on the ABC board. This procedure is outlined in
the Variable Speed ECM Configuration Mode portion of the Aurora
‘Base’ Control System section.
WANT TO CHANGE?
YES
OPTION ◄►
NO
ENTER ◙
Variable Speed ECM Speed Setup - These
screens allow the technician to select the low, medium, and high
blower speed for the variable speed ECM blower motor. Change
the highlighted item using the ▲ and ▼ buttons. Press the ◙
button to select the speed.
Variable Speed ECM Setup with an AID Tool
A much easier method utilizes the AID Tool to change the airflow
using the procedure below. First navigate to the Setup screen and
then select ECM Setup. This screen displays the current variable
speed ECM settings. It allows the technician to enter the setup
screens to change the variable speed ECM settings. Change the
highlighted item using the ◄ and ► buttons and then press the ◙
button to select the item.
ECM SPEED INFO
1
2 <– LOW
3
4
5
6
7
8
9
10
11
12
OPTION ◄►
ECM SPEED INFO
1
2 LOW
3
4
5
6
7
8
9
10
11
12
ENTER ◙
<– MED
OPTION ◄►
ENTER ◙
ECM SPEED INFO
1
2 LOW
3
4
5
6
7
8
9
10
11
12
MED
OPTION ◄►
After the high speed setting is selected the AID Tool will
automatically transfer back to the ECM Setup screen.
45
<– HIGH
ENTER ◙
ARBOR SERIES SPECIFICATION CATALOG
Selection Example
To achieve optimal performance, proper selection of each heat
pump is essential. A building load program should be used to
determine the heating and cooling load of each zone. A computer
software selection program can then be used to develop an
accurate and complete heat pump schedule. Software can be
obtained from your local commercial representative.
Step 4: Enter tables at the design water flow and water
temperature. Read the total and sensible cooling capacities (NOTE:
interpolation is permissible, extrapolation is not).
Step 5: Read the heating capacity. If it exceeds the design criteria it
is acceptable. It is quite normal for water source heat pumps to be
selected on cooling capacity only since the heating output is usually
greater than the cooling capacity.
While a computer software program is the easiest and most
accurate method to size and select equipment, however, selection
can still be accomplished manually using this manual and the
following selection procedure. Sizing so that the actual sensible
capacity of the equipment will satisfy the sensible capacity of the
zone is the recommended method for best results.
Step 6: Determine the correction factors associated with the
variable factors of dry bulb and wet bulb.
Corrected Total Cooling = tabulated total cooling x wet bulb
correction.
Corrected Sensible Cooling = tabulated sensible cooling x wet/dry
bulb correction.
Boiler/Tower Application
Typical boiler/tower application will result in entering water
temperatures of 60-90°F with 70°F for heating and 90°F for cooling.
Water to refrigerant insulation option would not be required.
Flow rates are 2.5 to 3 gpm per ton with 2.5 gpm per ton often
representing an economical design point.
Step 7: Compare the corrected capacities to the load requirements.
Normally if the capacities are within 10% of the loads, the equipment
is acceptable. It is better to undersize than oversize, as undersizing
improves humidity control, reduces sound levels and extends the life
of the equipment.
Geothermal Application
Step 8: When complete, calculate water temperature rise and
assess the selection. If the units selected are not within 10% of the
load calculations, then review what effect changing the gpm, water
temperature and/or airflow and air temperature would have on the
corrected capacities. If the desired capacity cannot be achieved,
select the next larger or smaller unit and repeat the procedure.
Remember, when in doubt, undersize slightly for best performance.
Typical geothermal application can result in a wide entering water
temperature range of 30-100°F. Typically minimum heating entering
water temperatures can range from 30 to 50°F depending upon
loop type and geographical location. Cooling performance should
be calculated using a maximum loop temperature of 100°F in
most loop applications. Water flow is typically 2.5 to 3 gpm per
ton with 3 gpm per ton recommended with the more extreme loop
temperatures. PLEASE NOTE THAT WATER COIL INSULATION
OPTION SHOULD BE SELECTED WHEN ENTERING WATER
TEMPERATURES ARE EXPECTED TO BE BELOW 45-50°F.
Example Equipment Selection - Cooling
1. Load Determination:
Assume we have determined that the appropriate cooling load
at the desired dry bulb 80°F and wet bulb 65°F conditions is as
follows:
Total Cooling ..............................................................56,500 Btu/h
Sensible Cooling........................................................36,300 Btu/h
Entering Air Temp ..........................75°F Dry Bulb / 60°F Wet Bulb
Geothermal Selection Example
Step 1: Determine the actual heating and cooling loads at the
desired dry bulb and wet bulb conditions.
Step 2: Obtain the following design parameters: Entering water
temperature, water flow rate in gpm, airflow in cfm, water flow
pressure drop and design wet and dry bulb temperatures. Airflow,
cfm, should be between 300 and 450 cfm per ton. Unit water
pressure drop should be kept as close as possible to each other to
make water balancing easier. Go to the appropriate tables and find
the proper indicated water flow and water temperature.
2. Design Conditions:
Similarly, we have also obtained the following design parameters:
Entering Water Temp ..............................................................90°F
Water Flow (Based upon 10°F rise in temp.) 15.0 gpm
Airflow Required ...................................... 1,850 cfm @ 0.2 in. wg.
Step 3: Select a unit based on total and sensible cooling conditions.
Select a unit which is closest to, but no larger than, the actual
cooling load.
46
ARBOR SERIES SPECIFICATION CATALOG
Selection Example cont.
3, 4 & 5. HP Selection:
HR = 500 x gpm x (Tin - Tout)
HR
= (Tin - Tout) or ¨T Rise
500 x gpm
After making our preliminary selection (US*060 ECM), we enter the
tables at design water flow and water temperature and read
Total Cooling, Sens. Cooling and Heat of Rej. capacities:
Total Cooling ..............................................................60,500 Btu/h
Sensible Cooling........................................................45,000 Btu/h
Heat of Rejection .......................................................75,500 Btu/h
72,432
500 x 15
= 9.65 °F Rise
8. Water Temperature Rise Calculation & Assessment:
Note: 500 = parameters for water & 485 = parameters for antifreeze
solutions to 30% weight.
6 & 7. Entering Air and Airflow Corrections:
Next, we determine our correction factors. (Refer to Correction
Factor Tables - Airflow and Entering Air correction tables — using 1,850
cfm. or 1,850÷2,000 nom. = 92.5%).
Corrected Total Cooling = 60,500 x 0.990 x 0.967 = 57,918
Corrected Sens Cooling = 45,000 x 0.956 x 0.881 = 37,900
Corrected Heat of Reject = 75,500 x 0.987 x 0.972 = 72,432
When we compare the Corrected Total Cooling and Corrected
Sensible Cooling figures with our load requirements stated in Step
1, we discover that our selection is within +10% of our sensible load
requirement. Further more, we see that our Corrected Total Cooling
figure is within 1,000 Btu/h of the actual indicated load.
Antifreeze Corrections
Catalog performance can be corrected for antifreeze use. Please use the following table and note the example given.
Antifreeze Type
Antifreeze
% by wt
EWT - degF [DegC]
Water
Ethylene Glycol
Propylene Glycol
Ethanol
Methanol
Cooling
Capacity
Heating
Capacity
Pressure Drop
90 [32.2]
30 [-1.1]
30 [-1.1]
0
1.000
1.000
1.000
10
0.991
0.973
1.075
20
0.979
0.943
1.163
30
0.965
0.917
1.225
40
0.955
0.890
1.324
50
0.943
0.865
1.419
10
0.981
0.958
1.130
20
0.969
0.913
1.270
30
0.950
0.854
1.433
40
0.937
0.813
1.614
50
0.922
0.770
1.816
10
0.991
0.927
1.242
20
0.972
0.887
1.343
30
0.947
0.856
1.383
40
0.930
0.815
1.523
50
0.911
0.779
1.639
10
0.986
0.957
1.127
20
0.970
0.924
1.197
30
0.951
0.895
1.235
40
0.936
0.863
1.323
50
0.920
0.833
1.399
Warning: Gray area represents antifreeze concentrations greater than 35% by weight and
should be avoided due to the extreme performance penalty they represent.
Antifreeze Correction Example
Antifreeze solution is Propylene Glycol 20% by weight. Determine the corrected heating and cooling performance at 30°F and 90°F respectively as well as pressure drop at 30°F for a Model 024-PSC.
The corrected cooling capacity at 90°F would be: 24,500 Btu/h x 0.969 = 23,740 Btu/h
The corrected heating capacity at 30°F would be: 19,000 Btu/h x 0.913 = 17,347 Btu/h
The corrected pressure drop at 30°F and 6 gpm would be: 10.5 ft. hd x 1.270 = 13.34 ft. hd.
47
ARBOR SERIES SPECIFICATION CATALOG
Reference Calculations
Heating Calculations:
LWT = EWT -
HE
GPM x 500
LAT = EAT +
HC
CFM x 1.08
Cooling Calculations:
LWT = EWT +
HR
GPM x 500
LAT (DB) = EAT (DB) -
SC
CFM x 1.08
LC = TC - SC
TH = HC + HWC
S/T =
SC
TC
Legend and Notes
ABBREVIATIONS AND DEFINITIONS:
CFM
EWT
GPM
WPD
EAT
=
=
=
=
=
HC
TC
SC
KW
HR
=
=
=
=
=
airflow, cubic feet/minute
entering water temperature, Fahrenheit
water flow in gallons/minute
water pressure drop, PSI and feet of water
entering air temperature, Fahrenheit
(dry bulb/wet bulb)
air heating capacity, MBTUH
total cooling capacity, MBTUH
sensible cooling capacity, MBTUH
total power unit input, kilowatts
total heat of rejection, MBTUH
HE
= total heat of extraction, MBTUH
HWC = hot water generator capacity, MBTUH
EER = Energy Efficient Ratio
= BTU output/Watt input
COP = Coefficient of Performance
= BTU output/BTU input
LWT = leaving water temperature, °F
LAT = leaving air temperature, °F
TH
= total heating capacity, MBTUH
LC
= latent cooling capacity, MBTUH
S/T = sensible to total cooling ratio
Notes (Refer to Performance Data tables)
• Performance ratings are based on 80°F DB / 67°F WB EAT for cooling and 70°F DB EAT for heating.
• Three flow rates are shown for each unit. The lowest flow rate shown is used for geothermal open loop/well water systems with a
minimum of 50°F EWT. The middle flow rate shown is the minimum geothermal closed loop flow rate. The highest flow rate shown is
optimum for geothermal closed loop systems and the suggested flow rate for boiler/tower applications.
• The hot water generator numbers are based on a flow rate of 0.4 GPM/ton of rated capacity with an EWT of 90°F.
• Entering water temperatures below 40°F assumes 15% antifreeze solution.
• For non-standard EAT conditions, apply the appropriate correction factors on (Refer to Correction Factor Tables).
• Interpolation between EWT, GPM and CFM data is permissible.
48
ARBOR SERIES SPECIFICATION CATALOG
Operating Limits
Cooling
Operating Limits
Air Limits
Min. Ambient Air
Rated Ambient Air
Max. Ambient Air
Min. Entering Air
Rated Entering Air db/wb
Max. Entering Air db/wb
Water Limits
Min. Entering Water
Normal Entering Water
Max. Entering Water
Heating
(°F)
(°C)
(°F)
(°C)
45
80
100
50
80.6/66.2
110/83
7.2
26.7
37.8
10.0
27/19
43/28.3
45
70
85
40
68
80
7.2
21.1
29.4
4.4
20.0
26.7
30
50-110
120
-1.1
10-43.3
48.9
20
30-70
90
-6.7
-1.1
32.2
NOTE: Minimum/maximum limits are only for start-up conditions, and are meant
for bringing the space up to occupancy temperature. Units are not designed to
operate at the minimum/maximum conditions on a regular basis. The operating
limits are dependent upon three primary factors: 1) water temperature, 2) return
air temperature, and 3) ambient temperature. When any of the factors are at the
minimum or maximum levels, the other two factors must be at the normal level for
proper and reliable unit operation.
Correction Factors
Cooling Capacity Corrections
Entering
Air WB ºF
55
60
65
66.2
67
70
75
Total
Clg Cap
0.898
0.912
0.967
0.983
1.000
1.053
1.168
60
0.723
65
0.866
0.632
Sensible Cooling Capacity Multipliers - Entering DB ºF
70
75
80
80.6
85
90
1.048
1.185
*
*
*
*
0.880
1.078
1.244
1.260
*
*
0.694
0.881
1.079
1.085
1.270
*
0.655
0.842
1.040
1.060
1.232
*
0.616
0.806
1.000
1.023
1.193
1.330
0.693
0.879
0.900
1.075
1.250
0.687
0.715
0.875
1.040
95
*
*
*
*
*
1.404
1.261
100
*
*
*
*
*
*
1.476
NOTE: * Sensible capacity equals total capacity at conditions shown.
Power
Input
0.985
0.994
0.997
0.999
1.000
1.003
1.007
Heat of
Rejection
0.913
0.927
0.972
0.986
1.000
1.044
1.141
11/10/09
Heating Corrections
Ent Air DB °F
45
Htg Cap
1.062
Power
0.739
Heat of Ext
1.158
50
1.050
0.790
1.130
55
1.037
0.842
1.096
60
1.025
0.893
1.064
65
1.012
0.945
1.030
68
1.005
0.976
1.012
70
1.000
1.000
1.000
75
0.987
1.048
0.970
80
0.975
1.099
0.930
11/10/09
Airflow Corrections
Airflow
cfm Per Ton
% of Nominal
of Clg
240
60
275
69
300
75
325
81
350
88
375
94
400
100
425
106
450
113
475
119
500
125
520
130
Cooling
Heating
Total Cap
Sens Cap
Power
Heat of Rej
Htg Cap
Power
0.922
0.944
0.959
0.971
0.982
0.992
1.000
1.007
1.012
1.017
1.019
1.020
0.786
0.827
0.860
0.894
0.929
0.965
1.000
1.034
1.065
1.093
1.117
1.132
0.910
0.924
0.937
0.950
0.964
0.982
1.000
1.020
1.042
1.066
1.092
1.113
0.920
0.940
0.955
0.967
0.978
0.990
1.000
1.010
1.018
1.026
1.033
1.038
0.943
0.958
0.968
0.977
0.985
0.993
1.000
1.007
1.013
1.018
1.023
1.026
1.150
1.105
1.078
1.053
1.031
1.014
1.000
0.990
0.983
0.980
0.978
0.975
49
Heat of Ext
0.893
0.922
0.942
0.959
0.973
0.988
1.000
1.011
1.020
1.028
1.034
1.038
11/10/09
ARBOR SERIES SPECIFICATION CATALOG
Pressure Drop
Model
009
012
015
018
023
024
030
036
041
042
048
060
070
gpm
Pressure Drop (psi)
Cv
1.0
1.5
9.6
0.02
1.8
2.0
9.7
0.04
3.0
9.9
0.09
6.0
4.0
10.1
0.16
0.8
0.7
1.5
9.6
0.02
1.8
1.5
2.5
9.8
0.06
3.2
2.7
2.3
3.5
10.0
0.12
4.9
4.5
3.8
3.5
4.5
10.2
0.19
0.5
0.5
0.4
0.4
2.0
9.7
0.04
1.1
1.0
0.9
0.8
0.6
3.0
9.9
0.09
4.0
1.9
1.8
1.6
1.5
1.3
4.0
10.1
0.16
5.0
3.3
3.2
3.0
2.9
2.7
5.0
10.4
0.23
3.0
1.1
1.0
0.9
0.8
0.6
3.0
9.9
0.09
4.0
1.9
1.8
1.6
1.5
1.3
4.0
10.1
0.16
5.0
3.3
3.2
3.0
2.9
2.7
5.0
10.4
0.23
6.0
4.5
4.4
4.3
4.1
4.0
6.0
10.6
0.32
3.0
1.1
1.0
0.9
0.8
0.6
3.0
9.9
0.09
4.5
2.4
2.2
2.1
2.0
1.9
4.5
10.2
0.19
6.0
4.5
4.4
4.3
4.1
4.0
6.0
10.6
0.32
8.0
6.7
6.6
6.5
6.3
6.2
8.0
11.0
0.53
3.0
1.1
1.0
0.9
0.8
0.6
3.0
9.9
0.09
4.5
2.4
2.2
2.1
2.0
1.9
4.5
10.2
0.19
6.0
4.5
4.4
4.3
4.1
4.0
6.0
10.6
0.32
8.0
6.7
6.6
6.5
6.3
6.2
8.0
11.0
0.53
4.0
0.9
0.8
0.7
0.6
0.5
4.0
10.1
0.16
6.0
1.9
1.8
1.7
1.6
1.5
6.0
10.6
0.32
8.0
3.7
3.6
3.5
3.4
3.3
8.0
11.0
0.53
10.0
4.8
4.7
4.6
4.5
4.4
10.0
11.5
0.76
5.0
1.4
1.1
0.9
0.7
0.5
5.0
10.4
0.23
7.0
2.5
2.3
2.1
1.8
1.6
7.0
10.8
0.42
9.0
6.0
5.8
5.5
5.3
5.1
9.0
11.2
0.64
12.0
6.6
6.4
6.2
6.0
5.7
12.0
11.9
1.02
5.0
1.5
1.2
0.9
0.5
0.4
5.0
10.4
0.23
8.0
3.4
3.1
2.8
2.5
2.1
8.0
11.0
0.53
11.0
7.9
7.5
7.2
6.9
6.6
11.0
11.7
0.89
14.0
9.1
8.8
8.5
8.2
7.9
14.0
12.3
1.29
5.0
1.5
1.2
0.9
0.5
0.4
5.0
15.9
0.10
8.0
3.4
3.1
2.8
2.5
2.1
8.0
16.6
0.23
11.0
7.9
7.5
7.2
6.9
6.6
11.0
17.2
0.41
14.0
9.1
8.8
8.5
8.2
7.9
14.0
17.9
0.61
6.0
2.0
1.7
1.3
1.0
0.6
6.0
16.1
0.14
9.0
4.2
3.8
3.5
3.1
2.7
9.0
16.8
0.29
12.0
6.7
6.3
5.9
5.6
5.2
12.0
17.4
0.47
16.0
11.5
11.2
10.8
10.5
10.1
16.0
18.3
0.76
9.0
3.6
3.3
3.0
2.7
2.3
9.0
16.8
0.29
12.0
6.1
5.8
5.5
5.2
4.8
12.0
17.4
0.47
15.0
9.6
9.2
8.9
8.6
8.3
15.0
18.1
0.69
20.0
15.5
15.2
14.9
14.5
14.2
20.0
19.2
1.09
12.0
4.1
3.6
3.2
2.8
2.3
12.0
17.4
0.47
15.0
5.9
5.0
4.6
4.1
3.7
15.0
18.1
0.69
18.0
8.8
8.4
7.9
0.5
7.1
18.0
18.7
0.92
24.0
12.9
12.0
11.5
11.1
10.7
24.0
20.1
1.43
50°F
70°F
90°F
110°F
1.5
2.0
1.7
1.4
1.3
2.0
3.8
3.2
2.8
2.3
3.0
7.2
6.0
5.1
4.5
4.0
4.0
12.0
10.0
9.0
7.5
1.5
1.1
1.0
0.9
2.5
2.5
2.3
2.1
3.5
3.9
3.6
4.5
5.3
2.0
0.6
3.0
Valve
Pressure
gpm
30°F
1/2 in.
1/2 in.
1/2 in.
1/2 in.
3/4 in.
3/4 in.
3/4 in.
3/4 in.
3/4 in.
1 in.
1 in.
1 in.
1 in.
Drop (psi)
11/10/09
7/6/10
50
ARBOR SERIES SPECIFICATION CATALOG
ZS009 - Performance Data
Single Speed PSC (350 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
psi
ft. hd.
1.5
2.2
5.1
2.0
4.2
9.7
3.0
7.5
17.3
1.5
2.0
4.6
2.0
3.8
8.8
6.1
0.64
3.9
84.1
2.79
11.2
7.5
0.67
0.52
13.0
21.7
3.0
7.2
16.6
6.9
0.67
4.6
86.2
3.01
11.4
7.7
0.67
0.49
13.0
23.4
1.5
1.9
4.4
2.0
3.5
8.1
6.9
0.67
4.6
86.3
3.03
11.1
7.6
0.68
0.55
13.0
20.3
3.0
6.5
15.0
7.5
0.69
5.2
87.9
3.21
11.2
7.7
0.68
0.52
13.0
21.6
1.5
1.7
3.9
7.6
0.69
5.2
88.1
3.23
11.1
7.6
0.69
0.59
13.1
18.6
2.0
3.2
7.4
7.8
0.69
5.4
88.6
3.29
11.1
7.6
0.69
0.58
13.1
19.0
3.0
6.0
13.8
8.2
0.70
5.8
89.6
3.41
11.1
7.6
0.69
0.56
13.0
19.9
1.5
1.6
3.6
8.7
0.72
6.2
90.9
3.52
10.4
7.3
0.70
0.66
12.6
15.9
2.0
3.0
6.9
8.9
0.72
6.4
91.5
3.59
10.5
7.3
0.70
0.64
12.6
16.3
3.0
5.6
12.8
9.3
0.73
6.8
92.7
3.74
10.5
7.4
0.70
0.61
12.6
17.2
1.5
1.4
3.2
9.7
0.75
7.1
93.7
3.79
9.8
7.0
0.71
0.72
12.2
13.6
2.0
2.8
6.5
10.0
0.75
7.4
94.4
3.88
9.8
7.0
0.71
0.70
12.2
14.0
3.0
5.1
11.9
10.5
0.76
7.9
95.8
4.05
10.0
7.2
0.72
0.67
12.3
14.9
1.5
1.4
3.1
11.2
0.77
8.5
97.5
4.27
9.0
6.8
0.75
0.80
11.7
11.3
2.0
2.6
5.9
11.4
0.77
8.8
98.1
4.32
9.1
6.8
0.75
0.76
11.7
12.0
3.0
4.8
11.0
11.8
0.78
9.1
99.1
4.42
9.3
7.0
0.75
0.74
11.8
12.6
1.5
1.3
3.0
12.6
0.78
9.9
101.4
4.74
8.3
6.6
0.79
0.87
11.3
9.5
2.0
2.3
5.3
12.8
0.79
10.1
101.9
4.75
8.4
6.7
0.79
0.83
11.3
10.2
3.0
4.5
10.4
13.0
0.80
10.3
102.4
4.76
8.6
6.8
0.79
0.80
11.3
10.7
1.5
1.3
2.9
2.0
2.1
4.7
7.9
6.5
0.83
0.91
11.0
8.6
3.0
4.3
9.8
8.0
6.6
0.82
0.88
11.0
9.1
1.5
1.0
2.3
2.0
1.8
4.2
3.0
4.0
9.2
1.5
0.9
2.1
2.0
1.7
3.9
6.2
5.6
0.89
3.0
3.8
8.8
6.4
5.6
0.89
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
TC
MBtu/h
SC
MBtu/h
Operation not recommended
6.0
0.65
3.8
83.9
S/T
Ratio
Power
kW
HR
MBtu/h
EER
Operation not recommended
2.71
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
7.2
6.2
0.86
0.99
10.6
7.3
7.4
6.3
0.86
0.96
10.6
7.7
1.07
9.9
5.8
1.04
9.9
Operation not recommended
6.1
11/10/09
51
ARBOR SERIES SPECIFICATION CATALOG
ZS012 - Performance Data
Single Speed PSC (400 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
psi
ft. hd.
1.5
1.2
2.8
2.5
2.6
6.0
3.5
4.1
9.5
1.5
1.1
2.5
2.5
2.5
5.8
8.6
0.81
5.9
88.0
3.13
15.7
10.0
0.64
0.47
17.3
33.5
3.5
3.9
9.0
8.9
0.83
6.1
88.6
3.14
15.9
10.2
0.64
0.44
17.4
36.1
1.5
1.1
2.4
2.5
2.4
5.5
9.6
0.83
6.8
90.2
3.39
15.3
10.0
0.65
0.53
17.1
28.6
3.5
3.8
8.7
10.0
0.85
7.1
91.0
3.45
15.5
10.1
0.65
0.50
17.1
31.2
1.5
1.0
2.3
10.3
0.85
7.4
91.8
3.55
14.7
10.0
0.68
0.65
16.9
22.6
2.5
2.3
5.3
10.7
0.86
7.7
92.7
3.65
14.9
10.0
0.67
0.60
16.9
24.8
3.5
3.6
8.3
11.0
0.86
8.1
93.5
3.75
15.0
9.9
0.66
0.55
16.9
27.3
1.5
1.0
2.2
11.5
0.87
8.5
94.5
3.86
14.2
9.7
0.68
0.73
16.7
19.5
2.5
2.2
5.1
11.9
0.88
8.9
95.5
3.96
14.4
9.7
0.68
0.68
16.7
21.1
3.5
3.4
7.9
12.4
0.89
9.3
96.6
4.07
14.5
9.8
0.67
0.63
16.6
23.0
1.5
0.9
2.1
12.6
0.89
9.6
97.2
4.15
13.7
9.4
0.69
0.81
16.5
16.9
2.5
2.1
4.9
13.2
0.91
10.1
98.4
4.26
13.9
9.5
0.69
0.76
16.4
18.2
3.5
3.2
7.4
13.7
0.92
10.6
99.7
4.36
14.0
9.6
0.69
0.71
16.4
19.7
1.5
0.9
2.0
14.2
0.91
11.0
100.8
4.54
13.0
9.2
0.70
0.89
16.1
14.6
2.5
2.0
4.5
14.6
0.93
11.4
101.7
4.60
13.2
9.3
0.70
0.85
16.1
15.5
3.5
2.9
6.7
15.0
0.94
11.7
102.6
4.66
13.4
9.4
0.70
0.83
16.2
16.2
1.5
0.8
1.8
15.7
0.94
12.5
104.4
4.92
12.4
8.9
0.72
1.02
15.8
12.1
2.5
1.8
4.2
16.0
0.95
12.7
104.9
4.93
12.5
9.0
0.72
0.97
15.9
12.9
3.5
2.7
6.2
16.2
0.96
12.9
105.5
4.95
12.8
9.2
0.71
0.94
16.0
13.6
1.5
0.8
1.7
2.5
1.7
3.8
12.2
9.0
0.73
1.11
16.0
11.0
3.5
2.5
5.8
12.4
9.0
0.73
1.07
16.1
11.6
1.5
0.7
1.6
2.5
1.5
3.5
3.5
2.3
5.3
1.5
0.7
1.5
2.5
1.4
3.1
11.3
8.6
0.76
3.5
2.1
4.9
11.5
8.7
0.76
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
TC
MBtu/h
SC
MBtu/h
Operation not recommended
7.2
0.81
4.4
84.7
S/T
Ratio
Power
kW
HR
MBtu/h
EER
Operation not recommended
2.61
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
11.8
8.8
12.0
8.9
0.75
1.23
16.0
9.5
0.74
1.20
16.1
10.0
1.34
15.8
8.4
1.30
15.9
Operation not recommended
8.8
11/10/09
52
ARBOR SERIES SPECIFICATION CATALOG
ZS015 - Performance Data
Single Speed PSC (500 cfm)
WPD
HEATING - EAT 70°F
EWT
°F
Flow
gpm
2.0
0.6
1.4
20
3.0
1.2
2.8
4.0
2.0
4.6
2.0
0.6
1.4
3.0
1.1
4.0
30
40
50
60
70
80
90
100
110
120
psi
ft. hd.
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
6.6
86.5
2.93
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
10.0
1.00
1.2
2.6
11.0
1.04
7.4
88.3
3.09
1.3
14.5
9.8
0.68
0.71
16.9
20.3
---
1.9
4.4
11.0
1.00
7.6
88.4
3.22
1.3
14.7
10.0
0.68
0.67
17.0
21.9
---
2.0
0.6
1.3
3.0
1.1
2.5
12.1
1.05
8.5
90.4
3.37
1.3
15.6
10.6
0.68
0.77
18.3
20.2
---
4.0
1.8
4.3
12.4
1.04
8.8
90.9
3.50
1.3
15.9
10.8
0.68
0.74
18.4
21.4
---
2.0
0.5
1.2
13.0
1.06
9.4
92.1
3.59
1.4
16.5
11.3
0.68
0.85
19.4
19.4
0.8
3.0
1.0
2.3
13.4
1.07
9.7
92.7
3.67
1.4
16.8
11.4
0.68
0.83
19.6
20.2
0.8
4.0
1.8
4.1
13.7
1.07
10.1
93.4
3.75
1.5
17.0
11.5
0.68
0.81
19.8
21.0
0.8
2.0
0.5
1.2
14.4
1.07
10.7
94.6
3.93
1.6
15.7
10.9
0.69
0.92
18.8
17.2
0.9
3.0
0.9
2.1
14.8
1.08
11.1
95.4
4.03
1.6
16.0
11.0
0.69
0.89
19.0
18.0
0.9
4.0
1.7
3.9
15.3
1.09
11.5
96.2
4.12
1.7
16.2
11.1
0.68
0.86
19.1
18.9
0.8
2.0
0.5
1.1
15.7
1.08
12.0
97.1
4.26
1.8
14.9
10.5
0.70
0.98
18.2
15.2
1.1
3.0
0.8
1.9
16.3
1.09
12.5
98.1
4.37
1.8
15.2
10.6
0.70
0.94
18.4
16.1
1.1
4.0
1.6
3.7
16.8
1.10
13.1
99.1
4.48
1.8
15.4
10.6
0.69
0.90
18.5
17.1
1.0
2.0
0.5
1.1
17.6
1.10
13.8
100.5
4.69
2.0
14.2
10.2
0.72
1.03
17.7
13.7
1.4
3.0
0.8
1.8
18.0
1.11
14.2
101.3
4.75
2.0
14.4
10.3
0.71
0.99
17.8
14.6
1.3
4.0
1.5
3.6
18.4
1.12
14.6
102.1
4.81
2.1
14.7
10.4
0.71
0.96
17.9
15.3
1.3
2.0
0.4
1.0
19.4
1.11
15.6
103.9
5.12
2.3
13.4
9.9
0.74
1.09
17.1
12.3
1.8
3.0
0.7
1.6
19.7
1.13
15.9
104.5
5.13
2.3
13.6
10.0
0.73
1.04
17.2
13.1
1.7
4.0
1.5
3.4
20.0
1.14
16.1
105.0
5.14
2.3
13.9
10.1
0.73
1.01
17.3
13.8
1.6
2.0
0.4
0.9
3.0
0.6
1.4
12.8
9.7
0.76
1.16
16.7
11.0
2.1
4.0
1.4
3.2
13.0
9.8
0.76
1.13
16.8
11.5
1.9
2.0
0.4
0.9
3.0
0.5
1.2
4.0
1.3
3.0
2.0
0.4
0.9
3.0
0.5
1.1
10.8
9.1
0.84
1.41
4.0
1.2
2.9
11.0
9.2
0.84
1.37
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
11.8
9.4
12.0
9.5
0.80
1.27
16.1
9.2
2.7
0.79
1.24
16.2
9.7
2.5
15.6
7.6
3.3
15.7
8.0
Operation not recommended
3.0
11/10/09
53
ARBOR SERIES SPECIFICATION CATALOG
ZS018 - Performance Data
Single Speed PSC (600 cfm)
WPD
HEATING - EAT 70°F
EWT
°F
Flow
gpm
3.0
1.2
2.8
20
4.0
2.0
4.6
5.0
3.4
7.8
3.0
1.1
2.6
4.0
1.9
5.0
30
40
50
60
70
80
90
100
110
120
psi
ft. hd.
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
8.9
88.1
3.15
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
13.0
1.21
1.4
4.4
14.5
1.29
10.1
90.3
3.29
1.5
18.2
11.8
0.65
0.86
21.1
21.0
---
3.3
7.6
14.9
1.31
10.4
91.0
3.33
1.5
18.4
12.0
0.65
0.81
21.2
22.7
---
3.0
1.1
2.5
4.0
1.8
4.3
15.7
1.34
11.1
92.2
3.43
1.6
19.1
12.4
0.65
0.92
22.2
20.8
---
5.0
3.2
7.5
16.5
1.37
11.8
93.4
3.52
1.6
19.4
12.6
0.65
0.89
22.4
21.9
---
3.0
1.0
2.3
16.0
1.36
11.4
92.7
3.45
1.7
19.7
12.8
0.65
0.98
23.0
20.1
0.9
4.0
1.8
4.1
17.0
1.40
12.2
94.2
3.57
1.7
20.0
13.0
0.65
0.97
23.3
20.6
0.9
5.0
3.2
7.3
18.0
1.43
13.1
95.8
3.69
1.8
20.3
13.1
0.65
0.96
23.6
21.1
0.9
3.0
0.9
2.1
17.5
1.43
12.6
95.0
3.60
1.9
18.7
12.4
0.66
1.07
22.3
17.6
1.1
4.0
1.7
3.9
18.5
1.45
13.5
96.5
3.73
1.9
18.9
12.6
0.67
1.06
22.5
17.9
1.1
5.0
3.1
7.1
19.5
1.48
14.5
98.1
3.86
2.0
19.2
12.8
0.67
1.05
22.7
18.3
1.0
3.0
0.8
1.9
19.0
1.49
13.9
97.3
3.74
2.1
17.7
12.0
0.68
1.15
21.6
15.4
1.3
4.0
1.6
3.7
20.0
1.51
14.8
98.9
3.88
2.1
17.9
12.3
0.69
1.14
21.7
15.7
1.3
5.0
3.0
6.9
21.0
1.53
15.8
100.4
4.02
2.2
18.0
12.5
0.69
1.13
21.9
15.9
1.2
3.0
0.8
1.8
21.9
1.56
16.5
101.7
4.10
2.4
16.6
11.4
0.69
1.36
21.2
12.2
1.7
4.0
1.5
3.6
22.6
1.58
17.2
102.8
4.17
2.4
16.8
11.7
0.70
1.30
21.2
12.9
1.6
5.0
2.9
6.8
23.3
1.61
17.8
103.9
4.25
2.5
17.0
12.0
0.70
1.26
21.3
13.5
1.5
3.0
0.7
1.6
24.7
1.64
19.1
106.2
4.43
2.8
15.4
10.8
0.70
1.49
20.5
10.3
2.2
4.0
1.5
3.4
25.1
1.66
19.5
106.8
4.44
2.8
15.7
11.1
0.71
1.43
20.5
11.0
2.0
5.0
2.9
6.6
25.5
1.68
19.8
107.4
4.45
2.8
16.0
11.4
0.71
1.38
20.7
11.6
1.9
3.0
0.6
1.4
4.0
1.4
3.2
14.9
11.0
0.74
1.52
20.1
9.8
2.5
5.0
2.8
6.4
15.1
11.1
0.73
1.47
20.1
10.3
2.3
3.0
0.5
1.2
4.0
1.3
3.0
13.9
10.5
5.0
2.7
6.2
14.2
10.7
3.0
0.5
1.1
4.0
1.2
2.9
13.2
10.1
0.76
1.76
5.0
2.6
6.1
13.5
10.2
0.76
1.71
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
0.76
1.60
19.4
8.7
3.2
0.75
1.56
19.5
9.1
3.0
19.2
7.5
4.0
19.3
7.9
Operation not recommended
3.6
11/10/09
54
ARBOR SERIES SPECIFICATION CATALOG
ZS023 - Performance Data
Single Speed PSC (700 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
psi
ft. hd.
3.0
1.2
2.8
4.5
2.4
5.6
6.0
4.6
10.6
3.0
1.1
2.6
4.5
2.4
5.5
17.9
1.74
11.9
88.7
3.01
26.3
16.7
0.63
1.11
30.1
23.8
6.0
4.5
10.5
18.2
1.76
12.2
89.1
3.04
26.7
17.0
0.64
1.04
30.2
25.7
3.0
1.1
2.5
4.5
2.3
5.3
19.6
1.78
13.6
90.7
3.24
26.5
17.0
0.64
1.20
30.6
22.0
6.0
4.5
10.3
20.3
1.80
14.1
91.4
3.30
26.8
17.3
0.64
1.14
30.7
23.6
3.0
1.0
2.3
20.8
1.79
14.7
92.1
3.41
26.4
17.3
0.66
1.37
31.1
19.3
4.5
2.2
5.2
21.6
1.82
15.4
92.9
3.48
26.6
17.4
0.65
1.30
31.1
20.5
6.0
4.4
10.2
22.3
1.84
16.0
93.8
3.55
26.9
17.5
0.65
1.23
31.1
21.9
3.0
1.0
2.2
23.0
1.83
16.7
94.6
3.68
25.7
17.0
0.66
1.52
30.9
16.9
4.5
2.2
5.0
23.8
1.85
17.5
95.5
3.76
25.9
17.1
0.66
1.44
30.9
18.0
6.0
4.3
10.0
24.6
1.88
18.2
96.4
3.84
26.2
17.2
0.66
1.36
30.8
19.3
3.0
0.9
2.0
25.2
1.87
18.8
97.1
3.94
25.0
16.7
0.67
1.67
30.7
15.0
4.5
2.1
4.9
26.0
1.89
19.6
98.1
4.03
25.3
16.8
0.67
1.58
30.6
16.0
6.0
4.3
9.9
26.9
1.91
20.4
99.1
4.12
25.5
16.9
0.66
1.49
30.6
17.1
3.0
0.8
1.9
27.9
1.88
21.5
100.2
4.35
23.8
16.1
0.68
1.81
30.0
13.1
4.5
2.1
4.7
28.5
1.90
22.0
101.0
4.40
24.1
16.3
0.68
1.73
30.0
13.9
6.0
4.2
9.7
29.2
1.92
22.6
101.8
4.46
24.5
16.5
0.67
1.68
30.2
14.6
3.0
0.8
1.7
30.6
1.88
24.1
103.4
4.76
22.7
15.6
0.69
2.01
29.6
11.3
4.5
2.0
4.6
31.0
1.91
24.5
103.9
4.77
23.0
15.8
0.69
1.92
29.6
12.0
6.0
4.1
9.6
31.5
1.93
24.9
104.5
4.78
23.5
16.0
0.68
1.86
29.8
12.6
3.0
0.7
1.6
4.5
1.9
4.4
21.7
15.1
0.69
2.20
29.2
9.9
6.0
4.1
9.4
22.1
15.2
0.69
2.13
29.3
10.4
3.0
0.6
1.4
4.5
1.9
4.3
6.0
4.0
9.3
3.0
0.6
1.3
4.5
1.8
4.1
18.4
14.2
0.77
6.0
3.9
9.1
18.8
14.4
0.77
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
TC
MBtu/h
SC
MBtu/h
Operation not recommended
15.0
1.68
9.2
85.3
S/T
Ratio
Power
kW
HR
MBtu/h
EER
Operation not recommended
2.61
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
20.2
14.2
0.70
2.46
28.6
8.2
20.6
14.4
0.70
2.39
28.8
8.6
2.85
28.2
6.5
2.77
28.3
Operation not recommended
6.8
11/10/09
55
ARBOR SERIES SPECIFICATION CATALOG
ZS024 - Performance Data
Single Speed PSC (800 cfm)
WPD
HEATING - EAT 70°F
EWT
°F
Flow
gpm
3.0
1.2
2.8
20
4.5
2.4
5.6
6.0
4.6
10.6
3.0
1.1
2.6
4.5
2.4
6.0
30
40
50
60
70
80
90
100
110
120
psi
ft. hd.
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
9.8
86.0
2.72
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
15.6
1.68
1.6
5.5
18.7
1.74
12.7
89.6
3.14
1.7
27.5
17.4
0.63
1.11
31.2
24.8
---
4.5
10.5
19.0
1.76
13.0
90.0
3.16
1.7
27.8
17.7
0.64
1.04
31.4
26.8
---
3.0
1.1
2.5
4.5
2.3
5.3
20.5
1.78
14.4
91.7
3.38
1.9
27.6
17.7
0.64
1.20
31.7
22.9
---
6.0
4.5
10.3
21.1
1.80
15.0
92.4
3.44
1.9
27.9
18.0
0.64
1.14
31.8
24.6
---
3.0
1.0
2.3
21.7
1.79
15.6
93.2
3.56
2.1
27.5
18.0
0.65
1.37
32.2
20.1
1.3
4.5
2.2
5.2
22.5
1.82
16.3
94.0
3.63
2.1
27.8
18.1
0.65
1.30
32.2
21.4
1.2
6.0
4.4
10.2
23.2
1.84
16.9
94.9
3.70
2.2
28.0
18.2
0.65
1.23
32.2
22.7
1.2
3.0
1.0
2.2
24.0
1.83
17.7
95.7
3.84
2.3
26.8
17.7
0.66
1.52
32.0
17.6
1.5
4.5
2.2
5.0
24.8
1.85
18.5
96.7
3.92
2.4
27.0
17.8
0.66
1.44
32.0
18.8
1.4
6.0
4.3
10.0
25.6
1.88
19.2
97.6
4.00
2.4
27.3
17.9
0.66
1.36
31.9
20.1
1.4
3.0
0.9
2.0
26.2
1.87
19.8
98.3
4.10
2.6
26.1
17.4
0.67
1.67
31.8
15.6
1.8
4.5
2.1
4.9
27.1
1.89
20.6
99.4
4.20
2.6
26.3
17.5
0.66
1.58
31.7
16.7
1.8
6.0
4.3
9.9
28.0
1.91
21.5
100.4
4.30
2.7
26.6
17.6
0.66
1.49
31.6
17.8
1.7
3.0
0.8
1.9
29.0
1.88
22.6
101.5
4.53
2.9
24.9
16.8
0.68
1.81
31.1
13.7
2.3
4.5
2.1
4.7
29.7
1.90
23.2
102.4
4.58
2.9
25.2
17.0
0.68
1.73
31.1
14.5
2.2
6.0
4.2
9.7
30.4
1.92
23.8
103.2
4.64
3.0
25.5
17.1
0.67
1.68
31.2
15.2
2.1
3.0
0.8
1.7
31.8
1.88
25.4
104.8
4.95
3.3
23.6
16.2
0.69
2.01
30.5
11.7
2.8
4.5
2.0
4.6
32.3
1.91
25.8
105.4
4.96
3.4
24.0
16.5
0.69
1.92
30.6
12.5
2.7
6.0
4.1
9.6
32.8
1.93
26.2
105.9
4.98
3.5
24.5
16.7
0.68
1.86
30.8
13.2
2.5
3.0
0.7
1.6
4.5
1.9
4.4
22.7
16.0
0.71
2.20
30.2
10.3
3.4
6.0
4.1
9.4
23.0
16.2
0.70
2.13
30.3
10.8
3.2
3.0
0.6
1.4
4.5
1.9
4.3
6.0
4.0
9.3
3.0
0.6
1.3
4.5
1.8
4.1
19.1
14.8
0.77
2.85
6.0
3.9
9.1
19.6
15.0
0.77
2.77
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
21.1
15.4
0.73
2.46
29.5
8.6
4.1
21.5
15.6
0.73
2.39
29.7
9.0
3.9
28.9
6.7
4.9
29.0
7.1
Operation not recommended
4.6
11/10/09
56
ARBOR SERIES SPECIFICATION CATALOG
ZS030 - Performance Data
Single Speed PSC (1000 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
PSI
FT
4.0
1.0
2.2
6.0
1.9
4.5
8.0
3.8
8.7
4.0
0.9
2.1
6.0
1.9
4.4
21.2
1.96
14.5
87.6
3.16
2.1
30.4
19.3
0.64
1.38
8.0
3.7
8.5
22.0
1.98
15.2
88.4
3.26
2.1
30.8
19.7
0.64
1.30
4.0
0.9
2.0
6.0
1.8
4.3
23.9
2.00
17.1
90.1
3.50
2.3
31.3
20.2
0.64
1.41
8.0
3.7
8.4
25.0
2.02
18.1
91.1
3.62
2.4
32.4
20.9
0.65
1.40
4.0
0.8
1.9
25.8
2.01
18.9
91.9
3.76
2.5
30.5
19.9
0.65
6.0
1.8
4.1
26.9
2.04
19.9
92.9
3.87
2.6
32.3
21.0
0.65
8.0
3.6
8.3
27.9
2.06
20.9
93.8
3.97
2.7
34.0
22.1
4.0
0.8
1.8
29.4
2.05
22.4
95.2
4.20
2.9
30.1
6.0
1.7
4.0
30.5
2.07
23.4
96.2
4.31
2.9
8.0
3.6
8.2
31.6
2.10
24.5
97.3
4.42
3.0
4.0
0.7
1.6
33.0
2.09
25.9
98.6
4.63
6.0
1.7
3.9
34.2
2.11
27.0
99.6
8.0
3.5
8.1
35.3
2.13
28.0
4.0
0.7
1.5
36.9
2.19
29.4
6.0
1.6
3.8
37.8
2.22
8.0
3.5
8.0
38.7
4.0
0.6
1.4
40.7
6.0
1.6
3.7
8.0
3.4
7.9
4.0
0.6
1.3
6.0
1.6
8.0
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
EER
HWC
MBtu/h
35.1
21.9
---
35.2
23.7
---
36.1
22.1
---
37.2
23.1
---
1.39
35.2
21.9
1.4
1.45
37.2
22.3
1.3
0.65
1.50
39.1
22.7
1.3
19.7
0.66
1.54
35.3
19.5
1.6
31.9
20.9
0.66
1.60
37.4
20.0
1.5
33.8
22.1
0.66
1.65
39.4
20.5
1.4
3.2
29.6
19.5
0.66
1.69
35.4
17.5
2.0
4.74
3.3
31.6
20.8
0.66
1.75
37.6
18.1
1.9
100.7
4.86
3.4
33.6
22.2
0.66
1.80
39.7
18.7
1.8
102.1
4.93
3.6
29.3
19.3
0.66
2.16
36.6
13.6
2.5
30.2
103.0
4.99
3.7
30.7
20.4
0.66
2.06
37.8
15.0
2.4
2.24
31.0
103.8
5.06
3.8
32.1
21.5
0.67
1.99
38.8
16.1
2.3
2.29
32.9
105.7
5.21
4.1
29.0
19.0
0.66
2.36
37.0
12.3
3.3
41.4
2.32
33.4
106.3
5.22
4.2
29.9
20.0
0.67
2.25
37.6
13.3
3.1
42.0
2.35
34.0
106.9
5.24
4.3
30.5
20.7
0.68
2.18
37.9
14.0
3.0
3.6
27.5
19.7
0.72
2.58
36.3
10.7
3.9
3.4
7.8
28.0
19.9
0.71
2.50
36.5
11.2
3.7
4.0
0.5
1.2
6.0
1.5
3.5
8.0
3.3
7.6
4.0
0.5
1.1
6.0
1.5
3.3
21.1
17.2
0.82
3.09
8.0
3.3
7.5
21.6
17.5
0.81
3.00
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
20.0
1.90
13.5
86.5
3.09
S/T
Ratio
Power
kW
HR
MBtu/h
Operation not recommended
1.9
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
24.9
18.7
0.75
2.89
34.7
8.6
4.9
25.4
19.0
0.75
2.81
35.0
9.0
4.5
31.7
6.8
5.7
31.8
7.2
Operation not recommended
5.4
11/10/09
57
ARBOR SERIES SPECIFICATION CATALOG
ZS036 - Performance Data
Single Speed PSC (1250 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
psi
ft. hd.
5.0
1.5
3.4
7.0
2.6
6.0
9.0
6.1
14.1
5.0
1.4
3.1
7.0
2.5
5.8
27.4
2.46
19.0
90.1
3.27
2.5
35.9
25.1
0.70
1.64
41.5
21.9
---
9.0
6.0
13.8
28.2
2.51
19.6
90.7
3.29
2.6
36.4
25.6
0.70
1.54
41.7
23.6
---
5.0
1.3
2.9
7.0
2.4
5.5
30.8
2.52
22.2
92.8
3.58
2.9
38.7
27.2
0.70
1.74
44.6
22.2
---
9.0
5.9
13.6
31.9
2.57
23.2
93.7
3.65
2.9
39.2
27.5
0.70
1.66
44.9
23.6
---
5.0
1.1
2.6
33.3
2.53
24.6
94.8
3.85
3.1
40.9
29.1
0.71
1.90
47.4
21.5
1.6
7.0
2.3
5.2
34.5
2.58
25.7
95.8
3.92
3.2
41.5
29.2
0.70
1.84
47.7
22.5
1.5
9.0
5.8
13.3
35.7
2.62
26.8
96.7
3.99
3.3
42.0
29.4
0.70
1.78
48.1
23.6
1.5
5.0
1.0
2.4
37.7
2.60
28.8
98.3
4.25
3.5
39.2
28.5
0.73
2.09
46.4
18.8
2.0
7.0
2.2
5.0
39.0
2.64
30.0
99.4
4.33
3.6
39.9
28.7
0.72
2.02
46.8
19.7
1.9
9.0
5.7
13.1
40.2
2.67
31.1
100.4
4.42
3.6
40.5
28.9
0.71
1.96
47.2
20.7
1.8
5.0
0.9
2.1
42.1
2.67
33.0
101.9
4.62
3.9
37.6
27.9
0.74
2.28
45.3
16.5
2.5
7.0
2.1
4.7
43.5
2.70
34.3
103.0
4.73
4.0
38.3
28.2
0.74
2.21
45.8
17.4
2.4
9.0
5.5
12.8
44.8
2.72
35.5
104.1
4.83
4.1
39.0
28.5
0.73
2.13
46.3
18.3
2.3
5.0
0.8
1.8
46.7
2.73
37.4
105.6
5.01
4.4
36.1
27.1
0.75
2.55
44.8
14.1
3.2
7.0
1.9
4.5
47.7
2.76
38.3
106.4
5.07
4.5
36.7
27.6
0.75
2.43
45.0
15.1
3.0
9.0
5.4
12.5
48.8
2.79
39.3
107.3
5.13
4.6
37.4
28.0
0.75
2.36
45.4
15.9
2.9
5.0
0.7
1.6
51.2
2.79
41.7
109.3
5.39
4.9
34.5
26.3
0.76
2.79
44.1
12.4
3.9
7.0
1.8
4.2
52.0
2.83
42.4
109.9
5.40
5.1
35.1
27.0
0.77
2.67
44.2
13.2
3.7
9.0
5.3
12.3
52.8
2.86
43.1
110.5
5.41
5.2
35.8
27.5
0.77
2.58
44.6
13.9
3.6
5.0
0.6
1.3
7.0
1.7
4.0
33.3
26.4
0.79
2.98
43.5
11.2
4.6
9.0
5.2
12.0
33.8
26.6
0.79
2.89
43.6
11.7
4.4
5.0
0.5
1.1
7.0
1.6
3.7
9.0
5.1
11.8
5.0
0.4
0.8
7.0
1.5
3.5
26.5
22.7
0.85
3.61
38.8
7.4
6.8
9.0
5.0
11.5
27.1
23.0
0.85
3.50
39.0
7.7
6.4
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
23.4
2.43
15.1
86.9
2.83
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
2.3
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
31.2
25.3
0.81
3.28
42.4
9.5
5.7
31.8
25.7
0.81
3.19
42.7
10.0
5.4
Operation not recommended
11/10/09
58
ARBOR SERIES SPECIFICATION CATALOG
ZS041 - Performance Data
Single Speed PSC (1300 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
psi
ft. hd
5.0
1.6
3.8
8.0
3.6
8.2
11.0
8.0
18.5
5.0
1.5
3.4
8.0
3.4
7.8
28.5
2.82
18.9
86.9
2.97
3.7
41.9
30.4
0.73
1.93
48.4
21.7
---
11.0
7.9
18.1
29.5
2.86
19.7
87.5
3.02
3.8
42.4
31.0
0.73
1.81
48.6
23.4
---
5.0
1.3
3.0
8.0
3.2
7.5
31.7
2.88
21.9
89.0
3.23
4.0
43.8
31.4
0.72
2.06
50.9
21.2
---
11.0
7.7
17.8
33.0
2.91
23.1
89.8
3.33
4.1
44.4
31.9
0.72
1.95
51.1
22.8
---
5.0
1.2
2.7
33.7
2.92
23.7
90.3
3.38
4.4
45.2
32.0
0.71
2.31
53.1
19.6
2.4
8.0
3.1
7.1
35.2
2.94
25.1
91.2
3.50
4.5
45.8
32.4
0.71
2.20
53.3
20.8
2.4
11.0
7.5
17.4
36.6
2.96
26.5
92.2
3.62
4.7
46.5
32.7
0.70
2.09
53.6
22.2
2.3
5.0
1.0
2.3
37.8
2.99
27.7
93.0
3.72
5.0
44.2
31.5
0.71
2.57
52.9
17.2
3.0
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
25.7
2.81
16.1
85.0
2.68
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
3.5
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
8.0
2.9
6.7
39.3
3.01
29.0
94.0
3.83
5.1
45.1
31.8
0.70
2.43
53.4
18.6
2.8
11.0
7.4
17.0
40.7
3.03
30.4
94.9
3.95
5.3
46.1
32.1
0.70
2.30
53.9
20.1
2.7
5.0
0.9
2.0
42.0
3.05
31.6
95.8
4.03
5.6
43.1
30.9
0.72
2.82
52.7
15.3
3.8
8.0
2.8
6.4
43.4
3.07
32.9
96.7
4.14
5.7
44.4
31.2
0.70
2.66
53.5
16.7
3.6
11.0
7.2
16.7
44.8
3.09
34.3
97.7
4.25
5.9
45.7
31.5
0.69
2.50
54.2
18.3
3.4
5.0
0.7
1.6
46.9
3.11
36.3
99.0
4.42
6.3
41.7
30.4
0.73
3.02
52.0
13.8
4.8
8.0
2.6
6.0
48.0
3.15
37.3
99.8
4.48
6.5
42.6
30.6
0.72
2.88
52.5
14.8
4.5
11.0
7.1
16.3
49.2
3.18
38.3
100.5
4.54
6.7
43.7
30.8
0.71
2.79
53.2
15.7
4.3
5.0
0.5
1.2
51.9
3.18
41.0
102.3
4.78
7.1
40.2
29.8
0.74
3.34
51.6
12.1
6.0
8.0
2.5
5.7
52.7
3.22
41.7
102.8
4.79
7.3
40.9
30.0
0.73
3.18
51.7
12.8
5.7
11.0
6.9
16.0
53.5
3.26
42.4
103.4
4.81
7.5
41.7
30.1
0.72
3.08
52.2
13.5
5.5
5.0
0.4
0.9
8.0
2.3
5.3
38.2
29.0
0.76
3.55
50.3
10.8
7.1
11.0
6.8
15.6
38.8
29.2
0.75
3.44
50.5
11.3
6.8
5.0
0.4
0.9
8.0
2.1
4.9
11.0
6.6
15.2
5.0
0.4
0.9
Operation not recommended
Operation not recommended
Operation not recommended
35.2
27.9
0.79
3.91
48.5
9.0
8.6
35.9
28.3
0.79
3.80
48.9
9.4
8.3
Operation not recommended
8.0
2.0
4.6
31.8
27.1
0.85
4.55
47.4
7.0
10.4
11.0
6.5
14.9
32.5
27.5
0.84
4.42
47.6
7.4
10.0
11/10/09
59
ARBOR SERIES SPECIFICATION CATALOG
ZS042 - Performance Data
Single Speed PSC (1400 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
5.0
1.6
3.8
8.0
3.6
8.2
11.0
8.0
18.5
5.0
1.5
3.4
8.0
3.4
11.0
5.0
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
17.4
85.9
2.82
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
27.0
2.81
3.5
7.8
30.0
2.82
20.4
87.8
3.12
3.7
43.6
31.7
0.73
1.93
50.2
22.6
---
7.9
18.1
31.0
2.86
21.2
88.5
3.18
3.8
44.2
32.3
0.73
1.81
50.4
24.4
---
1.3
3.0
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
8.0
3.2
7.5
33.4
2.88
23.5
90.1
3.40
4.0
45.7
32.7
0.72
2.06
52.7
22.1
---
11.0
7.7
17.8
34.8
2.91
24.8
91.0
3.50
4.1
46.3
33.2
0.72
1.95
53.0
23.7
---
5.0
1.2
2.7
35.5
2.92
25.5
91.5
3.56
4.4
47.1
33.4
0.71
2.31
55.0
20.4
2.4
8.0
3.1
7.1
37.0
2.94
27.0
92.5
3.69
4.5
47.8
33.8
0.71
2.20
55.3
21.7
2.4
11.0
7.5
17.4
38.5
2.96
28.4
93.5
3.81
4.7
48.4
34.1
0.70
2.09
55.5
23.2
2.3
5.0
1.0
2.3
39.9
2.99
29.7
94.4
3.91
5.0
46.0
32.8
0.71
2.57
54.8
17.9
3.0
8.0
2.9
6.7
41.4
3.01
31.1
95.3
4.03
5.1
47.0
33.1
0.70
2.43
55.3
19.3
2.8
11.0
7.4
17.0
42.9
3.03
32.5
96.3
4.15
5.3
48.0
33.5
0.70
2.30
55.8
20.9
2.7
5.0
0.9
2.0
44.2
3.05
33.8
97.2
4.25
5.6
44.9
32.2
0.72
2.82
54.5
15.9
3.8
8.0
2.8
6.4
45.7
3.07
35.2
98.2
4.36
5.7
46.3
32.5
0.70
2.66
55.3
17.4
3.6
11.0
7.2
16.7
47.2
3.09
36.7
99.2
4.48
5.9
47.6
32.8
0.69
2.50
56.1
19.0
3.4
5.0
0.7
1.6
49.4
3.11
38.8
100.7
4.65
6.3
43.4
31.6
0.73
3.02
53.8
14.4
4.8
8.0
2.6
6.0
50.6
3.15
39.8
101.5
4.71
6.5
44.4
31.9
0.72
2.88
54.3
15.4
4.5
11.0
7.1
16.3
51.8
3.18
40.9
102.2
4.78
6.7
45.6
32.1
0.70
2.79
55.1
16.3
4.3
5.0
0.5
1.2
54.6
3.18
43.8
104.1
5.04
7.1
42.0
31.0
0.74
3.34
53.4
12.6
6.0
8.0
2.5
5.7
55.5
3.22
44.5
104.7
5.05
7.3
42.6
31.2
0.73
3.18
53.5
13.4
5.7
11.0
6.9
16.0
56.3
3.26
45.2
105.2
5.06
7.5
43.5
31.4
0.72
3.08
54.0
14.1
5.5
5.0
0.4
0.9
Operation not recommended
8.0
2.3
5.3
39.8
30.2
0.76
3.55
52.0
11.2
7.1
11.0
6.8
15.6
40.5
30.5
0.75
3.44
52.2
11.8
6.8
5.0
0.4
0.9
8.0
2.1
4.9
36.7
29.1
11.0
6.6
15.2
37.4
29.5
5.0
0.4
0.9
8.0
2.0
4.6
33.2
28.2
0.85
4.55
11.0
6.5
14.9
33.9
28.6
0.84
4.42
Operation not recommended
Operation not recommended
0.79
3.91
50.0
9.4
8.6
0.79
3.80
50.4
9.8
8.3
48.7
7.3
10.4
49.0
7.7
Operation not recommended
10.0
11/10/09
60
ARBOR SERIES SPECIFICATION CATALOG
ZS048 - Performance Data
Single Speed PSC (1600 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
Flow
gpm
psi
6.0
2.2
5.1
9.0
4.4
10.0
12.0
6.8
15.8
6.0
2.0
4.7
9.0
4.2
12.0
6.0
ft. hd.
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
19.5
87.0
2.72
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
30.8
3.32
4.6
9.6
35.3
3.31
24.0
89.8
3.12
4.9
50.3
31.3
0.62
2.33
58.3
21.6
---
6.7
15.5
35.8
3.35
24.4
90.1
3.13
5.0
51.0
31.9
0.63
2.19
58.5
23.3
---
1.9
4.3
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
9.0
4.0
9.2
40.1
3.44
28.4
92.8
3.41
5.4
53.1
34.8
0.65
2.52
61.7
21.1
---
12.0
6.5
15.0
41.9
3.51
30.0
93.9
3.51
5.5
54.0
35.5
0.66
2.39
62.2
22.6
---
6.0
1.7
3.9
42.9
3.50
31.0
94.5
3.60
5.9
54.9
37.4
0.68
2.84
64.6
19.3
2.9
9.0
3.8
8.8
45.5
3.58
33.3
96.1
3.73
6.1
56.0
38.3
0.68
2.72
65.2
20.6
2.8
12.0
6.3
14.6
48.1
3.66
35.6
97.7
3.85
6.2
57.0
39.1
0.69
2.59
65.8
22.0
2.7
6.0
1.5
3.5
49.5
3.67
37.0
98.6
3.96
6.7
54.5
37.4
0.69
3.14
65.2
17.4
3.5
9.0
3.6
8.4
52.2
3.73
39.5
100.2
4.11
6.8
55.4
38.0
0.69
2.99
65.6
18.5
3.4
12.0
6.1
14.1
54.9
3.79
42.0
101.9
4.25
7.0
56.2
38.6
0.69
2.85
65.9
19.8
3.2
6.0
1.3
3.0
56.1
3.83
43.0
102.6
4.29
7.5
54.1
37.3
0.69
3.43
65.8
15.8
4.5
9.0
3.5
8.0
58.9
3.87
45.7
104.4
4.46
7.7
54.8
37.7
0.69
3.27
65.9
16.8
4.3
12.0
5.9
13.7
61.7
3.91
48.4
106.1
4.63
7.9
55.4
38.2
0.69
3.10
66.0
17.9
4.0
6.0
1.1
2.6
61.3
3.91
47.9
105.8
4.59
8.4
51.4
35.8
0.70
3.71
64.0
13.9
5.6
9.0
3.3
7.6
63.2
3.96
49.7
107.0
4.68
8.6
52.1
36.4
0.70
3.54
64.2
14.7
5.3
12.0
5.8
13.3
65.2
4.01
51.5
108.2
4.77
8.9
52.9
36.9
0.70
3.43
64.6
15.5
5.1
6.0
1.0
2.2
66.5
4.00
52.9
109.1
4.88
9.4
48.7
34.3
0.70
4.06
62.5
12.0
7.0
9.0
3.1
7.1
67.5
4.05
53.7
109.7
4.89
9.7
49.4
35.0
0.71
3.87
62.7
12.8
6.7
12.0
5.6
12.9
68.6
4.10
54.6
110.3
4.90
10.1
50.4
35.6
0.70
3.75
63.2
13.5
6.4
6.0
0.8
1.8
Operation not recommended
9.0
2.9
6.7
46.7
34.3
0.74
4.37
61.6
10.7
8.4
12.0
5.4
12.5
47.4
34.6
0.73
4.23
61.8
11.2
8.0
6.0
0.6
1.4
9.0
2.7
6.3
43.4
33.2
12.0
5.2
12.1
44.3
33.7
6.0
0.4
1.0
9.0
2.6
5.9
40.1
32.0
0.80
5.40
12.0
5.0
11.6
41.0
32.5
0.79
5.24
Operation not recommended
Operation not recommended
0.76
4.83
59.9
9.0
10.3
0.76
4.70
60.4
9.4
9.7
58.5
7.4
12.4
58.8
7.8
Operation not recommended
11.8
7/6/10
61
ARBOR SERIES SPECIFICATION CATALOG
ZS060 - Performance Data
Single Speed PSC (2000 cfm)
WPD
HEATING - EAT 70°F
COOLING - EAT 80/67°F
EWT
°F
Flow
gpm
9.0
3.8
8.7
20
12.0
6.3
14.5
15.0
9.7
22.5
9.0
3.6
8.4
12.0
6.1
14.1
43.8
3.99
30.2
88.3
3.22
5.9
72.0
49.1
0.68
2.96
82.1
24.3
---
15.0
9.6
22.2
46.5
4.11
32.5
89.5
3.31
6.1
73.0
50.0
0.68
2.78
82.5
26.3
---
30
40
50
60
70
80
90
100
110
120
psi
ft. hd.
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
41.9
4.06
28.0
87.4
3.02
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
5.5
Operation not recommended
Operation not recommended
9.0
3.5
8.0
12.0
6.0
13.7
49.7
4.12
Operation not recommended
35.6
91.0
3.53
6.6
70.8
48.8
Operation not recommended
0.69
3.11
81.4
22.8
---
15.0
9.4
21.7
52.2
4.22
37.8
92.2
3.63
6.7
71.8
49.5
0.69
2.97
81.9
24.2
---
9.0
3.3
7.6
54.6
4.20
40.3
93.3
3.81
7.1
68.5
48.0
0.70
3.34
79.9
20.5
3.9
12.0
5.8
13.4
56.2
4.26
41.7
94.0
3.87
7.3
69.5
48.5
0.70
3.25
80.6
21.4
3.7
15.0
9.2
21.3
57.8
4.32
43.1
94.8
3.92
7.5
70.5
48.9
0.69
3.16
81.3
22.3
3.5
9.0
3.1
7.3
62.2
4.35
47.3
96.8
4.19
8.0
67.3
47.0
0.70
3.64
79.7
18.5
4.8
12.0
5.6
13.0
64.3
4.41
49.3
97.8
4.28
8.3
68.2
47.6
0.70
3.54
80.3
19.3
4.6
15.0
9.1
21.0
66.4
4.46
51.2
98.8
4.36
8.5
69.1
48.3
0.70
3.45
80.9
20.1
4.4
9.0
3.0
6.9
69.8
4.50
54.4
100.3
4.54
9.0
66.0
46.0
0.70
3.93
79.4
16.8
6.0
12.0
5.5
12.6
72.4
4.55
56.9
101.5
4.66
9.3
66.9
46.8
0.70
3.83
79.9
17.5
5.7
15.0
8.9
20.6
75.0
4.60
59.3
102.7
4.78
9.5
67.7
47.6
0.70
3.73
80.4
18.2
5.4
9.0
2.8
6.5
76.2
4.59
60.6
103.3
4.87
10.2
62.2
45.0
0.72
4.45
77.4
14.0
7.6
12.0
5.3
12.3
78.2
4.65
62.3
104.2
4.93
10.5
63.1
45.7
0.72
4.25
77.6
14.9
7.2
15.0
8.8
20.2
80.1
4.70
64.1
105.1
5.00
10.7
64.1
46.3
0.72
4.11
78.1
15.6
6.8
9.0
2.7
6.1
82.7
4.68
66.8
106.3
5.18
11.4
58.4
43.9
0.75
4.86
75.0
12.0
9.5
12.0
5.2
11.9
84.0
4.74
67.8
106.9
5.19
11.8
59.3
44.6
0.75
4.64
75.2
12.8
9.0
15.0
8.6
19.9
85.3
4.80
68.9
107.5
5.21
12.2
60.5
45.0
0.74
4.49
75.9
13.5
8.6
9.0
2.5
5.8
12.0
5.0
11.5
56.1
43.4
Operation not recommended
0.77
5.15
73.7
10.9
11.2
15.0
8.4
19.5
57.0
43.7
0.77
4.99
74.0
11.4
10.6
9.0
2.3
5.4
12.0
4.8
11.2
15.0
8.3
19.1
9.0
2.2
5.0
12.0
4.7
10.8
48.0
39.9
0.83
6.25
15.0
8.1
18.8
49.0
40.5
0.83
6.07
Operation not recommended
Operation not recommended
52.3
41.8
0.80
5.63
71.6
9.3
13.8
53.4
42.4
0.79
5.48
72.1
9.7
13.1
69.3
7.7
16.6
69.7
8.1
Operation not recommended
15.9
7/6/10
62
ARBOR SERIES SPECIFICATION CATALOG
ZS070 - Performance Data
Single Speed PSC (2200 cfm)
WPD
HEATING - EAT 70°F
EWT
°F
Flow
gpm
12.0
4.3
9.8
20
15.0
5.6
13.0
18.0
9.0
20.8
12.0
4.1
9.4
15.0
5.9
18.0
8.8
12.0
3.8
8.8
15.0
5.2
18.0
30
40
50
60
70
80
90
100
110
120
psi
ft. hd.
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
29.0
87.4
2.71
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
46.0
4.98
6.5
13.6
52.0
4.92
35.2
89.9
3.09
7.0
73.0
46.1
0.63
3.30
84.3
22.1
---
20.3
53.7
5.06
36.4
90.6
3.11
7.3
74.0
47.0
0.64
3.10
84.6
23.9
---
12.0
58.4
5.10
41.0
92.6
3.35
7.8
74.6
49.3
0.66
3.49
86.5
21.4
---
8.6
19.8
60.9
5.20
43.1
93.6
3.43
8.0
76.1
50.5
0.66
3.36
87.5
22.7
---
12.0
3.6
8.4
62.8
5.25
44.9
94.4
3.51
8.5
74.2
51.0
0.69
3.74
87.0
19.8
4.3
15.0
5.0
11.5
65.4
5.29
47.4
95.5
3.62
8.7
76.2
52.5
0.69
3.68
88.7
20.7
4.1
18.0
8.4
19.3
68.0
5.33
49.8
96.6
3.74
8.9
78.2
54.0
0.69
3.61
90.5
21.7
3.9
12.0
3.4
7.9
71.9
5.46
53.3
98.3
3.86
9.5
71.6
50.0
0.70
4.08
85.5
17.6
5.2
15.0
4.8
11.0
73.9
5.49
55.2
99.1
3.95
9.8
73.3
51.3
0.70
4.00
87.0
18.3
4.9
18.0
8.2
18.8
76.0
5.52
57.2
100.0
4.03
10.1
75.1
52.5
0.70
3.92
88.4
19.1
4.8
12.0
3.2
7.4
81.0
5.66
61.7
102.1
4.19
10.7
69.0
49.0
0.71
4.41
84.0
15.6
6.6
15.0
4.6
10.5
82.5
5.69
63.1
102.7
4.25
11.0
70.5
50.0
0.71
4.32
85.2
16.3
6.3
18.0
7.9
18.3
84.0
5.71
64.5
103.3
4.31
11.3
71.9
51.0
0.71
4.23
86.4
17.0
6.0
12.0
3.0
6.9
89.7
5.82
69.8
105.8
4.52
12.1
65.3
47.4
0.73
5.04
82.5
12.9
8.3
15.0
4.4
10.0
91.2
5.88
71.2
106.4
4.55
12.4
66.5
48.3
0.73
4.81
82.9
13.8
7.9
18.0
7.7
17.9
92.7
5.93
72.5
107.0
4.59
12.8
67.9
49.0
0.72
4.66
83.8
14.6
7.5
12.0
2.8
6.4
98.4
5.99
78.0
109.4
4.82
13.6
61.6
45.8
0.74
5.50
80.4
11.2
10.4
15.0
4.1
9.5
99.9
6.07
79.2
110.1
4.83
14.0
62.5
46.6
0.75
5.25
80.4
11.9
9.9
18.0
7.5
17.3
101.5
6.14
80.5
110.7
4.84
14.4
63.8
47.0
0.74
5.08
81.1
12.6
9.4
12.0
2.5
5.9
15.0
3.9
9.1
59.7
44.9
0.75
5.83
79.6
10.2
12.4
18.0
7.3
16.9
60.6
45.3
0.75
5.65
79.8
10.7
11.7
12.0
2.3
5.4
15.0
3.7
8.5
18.0
7.1
16.4
12.0
2.1
4.9
15.0
3.5
18.0
6.9
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
56.2
42.9
0.76
6.38
78.0
8.8
15.1
57.4
43.5
0.76
6.21
78.5
9.2
14.3
8.1
51.9
41.4
0.80
7.09
76.0
7.3
18.2
15.9
53.0
42.0
0.79
6.88
76.4
7.7
Operation not recommended
17.3
7/6/10
63
ARBOR SERIES SPECIFICATION CATALOG
ZS015 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (500 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
2.0
0.6
1.4
3.0
1.2
2.8
4.0
2.0
4.6
2.0
0.6
1.4
3.0
1.1
4.0
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
6.8
86.5
3.09
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
10.0
0.95
1.2
2.6
11.0
0.99
7.6
88.3
3.25
1.3
14.5
9.8
0.68
0.66
16.8
22.0
---
1.9
4.4
11.0
0.95
7.8
88.4
3.39
1.3
14.7
10.0
0.68
0.62
16.8
23.7
---
2.0
0.6
1.3
3.0
1.1
2.5
12.1
1.00
8.7
90.4
3.54
1.3
15.6
10.6
0.68
0.72
18.1
21.7
---
4.0
1.8
4.3
12.4
0.99
9.0
90.9
3.67
1.3
15.9
10.8
0.68
0.69
18.2
23.0
---
2.0
0.5
1.2
13.0
1.01
9.6
92.1
3.77
1.4
16.5
11.3
0.68
0.80
19.2
20.6
0.8
3.0
1.0
2.3
13.4
1.02
9.9
92.7
3.85
1.4
16.8
11.4
0.68
0.78
19.4
21.5
0.8
4.0
1.8
4.1
13.7
1.02
10.2
93.4
3.94
1.5
17.0
11.5
0.68
0.76
19.6
22.4
0.8
2.0
0.5
1.2
14.4
1.02
10.9
94.6
4.12
1.6
15.7
10.9
0.69
0.87
18.7
18.2
0.9
3.0
0.9
2.1
14.8
1.03
11.3
95.4
4.22
1.6
16.0
11.0
0.69
0.84
18.8
19.1
0.9
4.0
1.7
3.9
15.3
1.04
11.7
96.2
4.32
1.7
16.2
11.1
0.68
0.81
18.9
20.1
0.8
2.0
0.5
1.1
15.7
1.03
12.2
97.1
4.47
1.8
14.9
10.5
0.70
0.93
18.1
16.0
1.1
3.0
0.8
1.9
16.3
1.04
12.7
98.1
4.58
1.8
15.2
10.6
0.70
0.89
18.2
17.0
1.1
4.0
1.6
3.7
16.8
1.05
13.2
99.1
4.69
1.8
15.4
10.6
0.69
0.85
18.3
18.1
1.0
2.0
0.5
1.1
17.6
1.05
14.0
100.5
4.92
2.0
14.2
10.2
0.72
0.98
17.5
14.4
1.4
3.0
0.8
1.8
18.0
1.06
14.4
101.3
4.98
2.0
14.4
10.3
0.71
0.94
17.6
15.4
1.3
4.0
1.5
3.6
18.4
1.07
14.7
102.1
5.04
2.1
14.7
10.4
0.71
0.91
17.7
16.2
1.3
2.0
0.4
1.0
19.4
1.06
15.8
103.9
5.35
2.3
13.4
9.9
0.74
1.04
17.0
12.9
1.8
3.0
0.7
1.6
19.7
1.08
16.0
104.5
5.36
2.3
13.6
10.0
0.73
0.99
17.0
13.7
1.7
4.0
1.5
3.4
20.0
1.09
16.3
105.0
5.38
2.3
13.9
10.1
0.73
0.96
17.2
14.5
1.6
2.0
0.4
0.9
3.0
0.6
1.4
12.8
9.7
0.76
1.11
16.5
11.5
2.1
4.0
1.4
3.2
13.0
9.8
0.76
1.08
16.6
12.0
1.9
2.0
0.4
0.9
3.0
0.5
1.2
4.0
1.3
3.0
2.0
0.4
0.9
3.0
0.5
1.1
10.8
9.1
0.84
1.36
4.0
1.2
2.9
11.0
9.2
0.84
1.32
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
11.8
9.4
12.0
9.5
0.80
1.22
15.9
9.6
2.7
0.79
1.19
16.1
10.1
2.5
15.4
7.9
3.3
15.5
8.3
Operation not recommended
3.0
11/10/09
64
ARBOR SERIES SPECIFICATION CATALOG
ZS018 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (600 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
3.0
1.2
2.8
4.0
2.0
4.6
5.0
3.4
7.8
3.0
1.1
2.6
4.0
1.9
5.0
3.0
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
9.1
88.1
3.31
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
13.0
1.15
1.4
4.4
14.5
1.23
10.3
90.3
3.45
1.5
18.2
11.8
0.65
0.80
20.9
22.7
---
3.3
7.6
14.9
1.25
10.6
91.0
3.49
1.5
18.4
12.0
0.65
0.75
21.0
24.5
---
1.1
2.5
4.0
1.8
4.3
15.7
1.28
11.3
92.2
3.59
1.6
19.1
12.4
0.65
0.85
22.0
22.3
---
5.0
3.2
7.5
16.5
1.31
12.0
93.4
3.68
1.6
19.4
12.6
0.65
0.83
22.2
23.5
---
3.0
1.0
2.3
16.0
1.30
11.6
92.7
3.61
1.7
19.7
12.8
0.65
0.92
22.8
21.4
0.9
4.0
1.8
4.1
17.0
1.34
12.4
94.2
3.73
1.7
20.0
13.0
0.65
0.91
23.1
22.0
0.9
5.0
3.2
7.3
18.0
1.37
13.3
95.8
3.85
1.8
20.3
13.1
0.65
0.90
23.4
22.6
0.9
3.0
0.9
2.1
17.5
1.37
12.8
95.0
3.76
1.9
18.7
12.4
0.66
1.01
22.1
18.6
1.1
4.0
1.7
3.9
18.5
1.39
13.7
96.5
3.89
1.9
18.9
12.6
0.67
1.00
22.3
19.0
1.1
5.0
3.1
7.1
19.5
1.42
14.7
98.1
4.02
2.0
19.2
12.8
0.67
0.99
22.5
19.4
1.0
3.0
0.8
1.9
19.0
1.43
14.1
97.3
3.89
2.1
17.7
12.0
0.68
1.09
21.4
16.2
1.3
4.0
1.6
3.7
20.0
1.45
15.1
98.9
4.04
2.1
17.9
12.3
0.69
1.08
21.5
16.5
1.3
5.0
3.0
6.9
21.0
1.47
16.0
100.4
4.19
2.2
18.0
12.5
0.69
1.07
21.7
16.8
1.2
3.0
0.8
1.8
21.9
1.50
16.7
101.7
4.26
2.4
16.6
11.4
0.69
1.29
21.0
12.8
1.7
4.0
1.5
3.6
22.6
1.53
17.4
102.8
4.33
2.4
16.8
11.7
0.70
1.23
21.0
13.6
1.6
5.0
2.9
6.8
23.3
1.55
18.0
103.9
4.41
2.5
17.0
12.0
0.70
1.20
21.1
14.2
1.5
3.0
0.7
1.6
24.7
1.58
19.3
106.2
4.59
2.8
15.4
10.8
0.70
1.43
20.3
10.8
2.2
4.0
1.5
3.4
25.1
1.60
19.7
106.8
4.60
2.8
15.7
11.1
0.71
1.36
20.3
11.5
2.0
5.0
2.9
6.6
25.5
1.62
20.0
107.4
4.61
2.8
16.0
11.4
0.71
1.32
20.5
12.1
1.9
3.0
0.6
1.4
4.0
1.4
3.2
14.9
11.0
0.74
1.46
19.8
10.2
2.5
5.0
2.8
6.4
15.1
11.1
0.73
1.41
19.9
10.7
2.3
3.0
0.5
1.2
4.0
1.3
3.0
5.0
2.7
6.2
3.0
0.5
1.1
4.0
1.2
2.9
13.2
10.1
0.76
1.70
5.0
2.6
6.1
13.5
10.2
0.76
1.65
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
13.9
10.5
14.2
10.7
0.76
1.54
19.2
9.0
3.2
0.75
1.50
19.3
9.5
3.0
19.0
7.8
4.0
19.1
8.2
Operation not recommended
3.6
11/10/09
65
ARBOR SERIES SPECIFICATION CATALOG
ZS023 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (800 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
psi
ft. hd.
3.0
1.2
2.8
4.5
2.4
5.6
6.0
4.6
10.6
3.0
1.1
2.6
4.5
2.4
5.5
17.9
1.59
12.4
88.7
3.29
26.3
16.7
0.63
0.94
29.6
27.9
6.0
4.5
10.5
18.2
1.61
12.7
89.1
3.31
26.7
17.0
0.64
0.89
29.7
30.2
3.0
1.1
2.5
4.5
2.3
5.3
19.6
1.63
14.1
90.7
3.54
26.5
17.0
0.64
1.04
30.1
25.4
6.0
4.5
10.3
20.3
1.65
14.6
91.4
3.60
26.8
17.3
0.64
0.98
30.1
27.3
3.0
1.0
2.3
20.8
1.64
15.2
92.1
3.71
26.4
17.3
0.66
1.22
30.6
21.7
4.5
2.2
5.2
21.6
1.66
15.9
92.9
3.79
26.7
17.4
0.65
1.15
30.6
23.2
6.0
4.4
10.2
22.3
1.69
16.5
93.8
3.87
26.9
17.5
0.65
1.08
30.6
25.0
3.0
1.0
2.2
23.0
1.68
17.3
94.6
4.01
25.7
17.0
0.66
1.37
30.4
18.8
4.5
2.2
5.0
23.8
1.70
18.0
95.5
4.09
26.0
17.1
0.66
1.29
30.3
20.2
6.0
4.3
10.0
24.6
1.72
18.7
96.5
4.18
26.2
17.2
0.66
1.21
30.3
21.7
3.0
0.9
2.0
25.2
1.72
19.3
97.2
4.28
25.0
16.7
0.67
1.52
30.2
16.5
4.5
2.1
4.9
26.1
1.74
20.1
98.2
4.38
25.3
16.8
0.67
1.43
30.1
17.7
6.0
4.3
9.9
26.9
1.76
20.9
99.1
4.48
25.5
16.9
0.66
1.34
30.1
19.0
3.0
0.8
1.9
27.9
1.73
22.0
100.3
4.72
23.8
16.2
0.68
1.65
29.5
14.4
4.5
2.1
4.7
28.5
1.75
22.6
101.0
4.78
24.1
16.3
0.68
1.58
29.5
15.3
6.0
4.2
9.7
29.2
1.77
23.2
101.8
4.83
24.5
16.5
0.67
1.53
29.7
16.1
3.0
0.8
1.7
30.6
1.74
24.6
103.4
5.16
22.7
15.6
0.69
1.85
29.0
12.2
4.5
2.0
4.6
31.0
1.76
25.0
103.9
5.17
23.0
15.8
0.69
1.77
29.1
13.0
6.0
4.1
9.6
31.5
1.78
25.4
104.5
5.19
23.5
16.0
0.68
1.71
29.3
13.7
3.0
0.7
1.6
4.5
1.9
4.4
21.7
15.1
0.69
2.04
28.7
10.7
6.0
4.1
9.4
22.1
15.2
0.69
1.97
28.8
11.2
3.0
0.6
1.4
4.5
1.9
4.3
6.0
4.0
9.3
3.0
0.6
1.3
4.5
1.8
4.1
18.4
14.2
0.77
6.0
3.9
9.1
18.8
14.4
0.77
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
TC
MBtu/h
SC
MBtu/h
Operation not recommended
15.0
1.53
9.8
85.4
S/T
Ratio
Power
kW
HR
MBtu/h
EER
Operation not recommended
2.87
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
20.2
14.2
0.70
2.30
28.0
8.8
20.6
14.4
0.70
2.24
28.2
9.2
2.70
27.6
6.8
2.63
27.8
Operation not recommended
7.2
11/10/09
66
ARBOR SERIES SPECIFICATION CATALOG
ZS024 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (800 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
psi
ft. hd.
3.0
1.2
2.8
4.5
2.4
5.6
6.0
4.6
10.6
3.0
1.1
2.6
4.5
2.4
5.5
18.7
1.59
13.2
89.6
3.44
1.7
27.5
17.4
0.63
0.94
30.7
29.1
---
6.0
4.5
10.5
19.0
1.61
13.5
90.0
3.46
1.7
27.8
17.7
0.64
0.89
30.9
31.5
---
3.0
1.1
2.5
4.5
2.3
5.3
20.5
1.63
14.9
91.7
3.69
1.9
27.6
17.7
0.64
1.04
31.2
26.4
---
6.0
4.5
10.3
21.1
1.65
15.5
92.4
3.75
1.9
27.9
18.0
0.64
0.98
31.3
28.5
---
3.0
1.0
2.3
21.7
1.64
16.1
93.2
3.88
2.1
27.5
18.0
0.65
1.22
31.7
22.6
1.3
4.5
2.2
5.2
22.5
1.66
16.8
94.0
3.96
2.1
27.8
18.1
0.65
1.15
31.7
24.2
1.2
6.0
4.4
10.2
23.2
1.69
17.4
94.9
4.03
2.2
28.0
18.2
0.65
1.08
31.6
26.0
1.2
3.0
1.0
2.2
24.0
1.68
18.2
95.7
4.17
2.3
26.8
17.7
0.66
1.37
31.5
19.6
1.5
4.5
2.2
5.0
24.8
1.70
19.0
96.7
4.26
2.4
27.0
17.8
0.66
1.29
31.4
21.0
1.4
6.0
4.3
10.0
25.6
1.72
19.7
97.6
4.35
2.4
27.3
17.9
0.66
1.21
31.4
22.6
1.4
3.0
0.9
2.0
26.2
1.72
20.3
98.3
4.45
2.6
26.1
17.4
0.67
1.52
31.3
17.2
1.8
4.5
2.1
4.9
27.1
1.74
21.1
99.4
4.56
2.6
26.3
17.5
0.66
1.43
31.2
18.4
1.8
6.0
4.3
9.9
28.0
1.76
22.0
100.4
4.66
2.7
26.6
17.6
0.66
1.34
31.1
19.8
1.7
3.0
0.8
1.9
29.0
1.73
23.1
101.5
4.91
2.9
24.9
16.8
0.68
1.65
30.5
15.0
2.3
4.5
2.1
4.7
29.7
1.75
23.7
102.4
4.97
2.9
25.2
17.0
0.68
1.58
30.5
16.0
2.2
6.0
4.2
9.7
30.4
1.77
24.3
103.2
5.03
3.0
25.5
17.1
0.67
1.53
30.7
16.7
2.1
3.0
0.8
1.7
31.8
1.74
25.9
104.8
5.37
3.3
23.6
16.2
0.69
1.85
29.9
12.8
2.8
4.5
2.0
4.6
32.3
1.76
26.3
105.4
5.38
3.4
24.0
16.5
0.69
1.77
30.0
13.6
2.7
6.0
4.1
9.6
32.8
1.78
26.7
105.9
5.40
3.5
24.5
16.7
0.68
1.71
30.3
14.3
2.5
3.0
0.7
1.6
4.5
1.9
4.4
22.7
16.0
0.71
2.04
29.6
11.1
3.4
6.0
4.1
9.4
23.0
16.2
0.70
1.97
29.7
11.7
3.2
3.0
0.6
1.4
4.5
1.9
4.3
6.0
4.0
9.3
3.0
0.6
1.3
4.5
1.8
4.1
19.1
14.8
0.77
2.70
6.0
3.9
9.1
19.6
15.0
0.77
2.63
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
15.6
1.53
10.3
86.0
2.98
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
1.6
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
21.1
15.4
0.73
2.30
29.0
9.2
4.1
21.5
15.6
0.73
2.24
29.2
9.6
3.9
28.4
7.1
4.9
28.5
7.4
Operation not recommended
4.6
11/10/09
67
ARBOR SERIES SPECIFICATION CATALOG
ZS030 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (1000 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
4.0
1.0
2.2
6.0
1.9
4.5
8.0
3.8
8.7
4.0
0.9
2.1
6.0
1.9
8.0
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
14.2
86.5
3.45
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
20.0
1.70
1.9
4.4
21.2
1.76
15.1
87.6
3.52
2.1
30.4
19.3
0.64
1.17
34.4
25.9
---
3.7
8.5
22.0
1.78
15.9
88.4
3.62
2.1
30.8
19.7
0.64
1.10
34.6
28.0
---
4.0
0.9
2.0
6.0
1.8
4.3
23.9
1.80
17.7
90.1
3.89
2.3
31.3
20.2
0.64
1.21
35.4
25.9
---
8.0
3.7
8.4
25.0
1.82
18.7
91.1
4.02
2.4
32.4
20.9
0.65
1.20
36.5
27.0
---
4.0
0.8
1.9
25.8
1.81
19.6
91.9
4.18
2.5
30.5
19.9
0.65
1.19
34.6
25.6
1.4
6.0
1.8
4.1
26.9
1.84
20.6
92.9
4.29
2.6
32.3
21.0
0.65
1.25
36.5
25.9
1.3
8.0
3.6
8.3
27.9
1.86
21.6
93.8
4.40
2.7
34.0
22.1
0.65
1.30
38.4
26.2
1.3
4.0
0.8
1.8
29.4
1.85
23.1
95.2
4.66
2.9
30.1
19.7
0.66
1.34
34.6
22.4
1.6
6.0
1.7
4.0
30.5
1.87
24.1
96.2
4.77
2.9
31.9
20.9
0.66
1.40
36.7
22.9
1.5
8.0
3.6
8.2
31.6
1.90
25.1
97.3
4.89
3.0
33.8
22.1
0.66
1.45
38.7
23.3
1.4
4.0
0.7
1.6
33.0
1.89
26.6
98.6
5.12
3.2
29.6
19.5
0.66
1.49
34.7
19.9
2.0
6.0
1.7
3.9
34.2
1.91
27.6
99.6
5.24
3.3
31.6
20.8
0.66
1.55
36.9
20.5
1.9
8.0
3.5
8.1
35.3
1.93
28.7
100.7
5.36
3.4
33.6
22.2
0.66
1.60
39.1
21.0
1.8
4.0
0.7
1.5
36.9
1.99
30.1
102.1
5.42
3.6
29.3
19.3
0.66
1.94
35.9
15.1
2.5
6.0
1.6
3.8
37.8
2.02
30.9
103.0
5.49
3.7
30.7
20.4
0.66
1.85
37.1
16.6
2.4
8.0
3.5
8.0
38.7
2.04
31.7
103.8
5.55
3.8
32.1
21.5
0.67
1.79
38.2
17.9
2.3
4.0
0.6
1.4
40.7
2.10
33.6
105.7
5.70
4.1
29.0
19.0
0.66
2.14
36.3
13.5
3.3
6.0
1.6
3.7
41.4
2.12
34.1
106.3
5.71
4.2
29.9
20.0
0.67
2.05
36.9
14.6
3.1
8.0
3.4
7.9
42.0
2.15
34.7
106.9
5.73
4.3
30.5
20.7
0.68
1.98
37.3
15.4
3.0
4.0
0.6
1.3
6.0
1.6
3.6
27.5
19.7
0.72
2.37
35.6
11.6
3.9
8.0
3.4
7.8
28.0
19.9
0.71
2.30
35.8
12.2
3.7
4.0
0.5
1.2
6.0
1.5
3.5
8.0
3.3
7.6
4.0
0.5
1.1
6.0
1.5
3.3
21.1
17.2
0.82
2.88
8.0
3.3
7.5
21.6
17.5
0.81
2.80
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
24.9
18.7
25.4
19.0
0.75
2.68
34.0
9.3
4.9
0.75
2.61
34.3
9.7
4.5
31.0
7.3
5.7
31.2
7.7
Operation not recommended
5.4
11/10/09
68
ARBOR SERIES SPECIFICATION CATALOG
ZS036 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (1150 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
Flow
gpm
psi
ft. hd.
5.0
1.5
3.4
7.0
2.6
6.0
9.0
6.1
14.1
5.0
1.4
3.1
7.0
2.5
9.0
5.0
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COOLING - EAT 80/67°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
15.6
86.9
2.97
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
23.4
2.31
2.3
5.8
27.4
2.34
19.4
90.1
3.43
2.5
35.9
25.1
0.70
1.51
41.1
23.7
---
6.0
13.8
28.2
2.38
20.1
90.7
3.47
2.6
36.4
25.6
0.70
1.42
41.2
25.6
---
1.3
2.9
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
7.0
2.4
5.5
30.8
2.40
22.6
92.8
3.76
2.9
38.7
27.2
0.70
1.62
44.2
23.9
---
9.0
5.9
13.6
31.9
2.44
23.6
93.7
3.84
2.9
39.2
27.5
0.70
1.54
44.5
25.5
---
5.0
1.1
2.6
33.3
2.41
25.0
94.8
4.05
3.1
40.9
29.1
0.71
1.78
47.0
23.0
1.6
7.0
2.3
5.2
34.5
2.46
26.1
95.8
4.12
3.2
41.5
29.2
0.70
1.72
47.3
24.1
1.5
9.0
5.8
13.3
35.7
2.50
27.2
96.7
4.18
3.3
42.0
29.4
0.70
1.66
47.7
25.3
1.5
5.0
1.0
2.4
37.7
2.48
29.2
98.3
4.45
3.5
39.2
28.5
0.73
1.97
46.0
19.9
2.0
7.0
2.2
5.0
39.0
2.52
30.4
99.4
4.54
3.6
39.9
28.7
0.72
1.90
46.4
21.0
1.9
9.0
5.7
13.1
40.2
2.55
31.5
100.4
4.62
3.6
40.5
28.9
0.71
1.84
46.8
22.1
1.8
5.0
0.9
2.1
42.1
2.55
33.4
101.9
4.84
3.9
37.6
27.9
0.74
2.16
44.9
17.4
2.5
7.0
2.1
4.7
43.5
2.58
34.7
103.0
4.95
4.0
38.3
28.2
0.74
2.09
45.4
18.4
2.4
9.0
5.5
12.8
44.8
2.60
35.9
104.1
5.05
4.1
39.0
28.5
0.73
2.01
45.9
19.4
2.3
5.0
0.8
1.8
46.7
2.62
37.8
105.6
5.23
4.4
36.1
27.1
0.75
2.42
44.3
14.9
3.2
7.0
1.9
4.5
47.7
2.65
38.7
106.4
5.29
4.5
36.7
27.6
0.75
2.31
44.6
15.9
3.0
9.0
5.4
12.5
48.8
2.68
39.7
107.3
5.35
4.6
37.4
28.0
0.75
2.24
45.0
16.7
2.9
5.0
0.7
1.6
51.2
2.68
42.1
109.3
5.60
4.9
34.5
26.3
0.76
2.66
43.6
13.0
3.9
7.0
1.8
4.2
52.0
2.72
42.8
109.9
5.61
5.1
35.1
27.0
0.77
2.54
43.8
13.8
3.7
9.0
5.3
12.3
52.8
2.75
43.5
110.5
5.63
5.2
35.8
27.5
0.77
2.46
44.2
14.6
3.6
5.0
0.6
1.3
7.0
1.7
4.0
33.3
26.4
0.79
2.86
43.0
11.7
4.6
9.0
5.2
12.0
33.8
26.6
0.79
2.77
43.2
12.2
4.4
5.0
0.5
1.1
7.0
1.6
3.7
31.2
25.3
9.0
5.1
11.8
31.8
25.7
5.0
0.4
0.8
7.0
1.5
3.5
26.5
22.7
0.85
3.53
9.0
5.0
11.5
27.1
23.0
0.85
3.43
Operation not recommended
Operation not recommended
Operation not recommended
0.81
3.16
41.9
9.9
5.7
0.81
3.07
42.3
10.4
5.4
38.6
7.5
6.8
38.8
7.9
Operation not recommended
6.4
11/10/09
69
ARBOR SERIES SPECIFICATION CATALOG
ZS041 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (1300 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
psi
ft. hd.
5.0
1.6
3.8
8.0
3.6
8.2
11.0
8.0
18.5
5.0
1.5
3.4
8.0
3.4
7.8
28.5
2.61
19.6
86.9
3.20
3.7
41.8
30.4
0.73
1.71
47.7
24.5
---
11.0
7.9
18.1
29.5
2.66
20.4
87.5
3.26
3.8
42.4
31.0
0.73
1.61
47.9
26.4
---
5.0
1.3
3.0
8.0
3.2
7.5
31.7
2.67
22.6
89.0
3.48
4.0
43.8
31.4
0.72
1.85
50.2
23.7
---
11.0
7.7
17.8
33.1
2.71
23.8
89.9
3.58
4.1
44.5
31.9
0.72
1.75
50.4
25.5
---
5.0
1.2
2.7
33.7
2.72
24.4
90.3
3.64
4.4
45.2
32.0
0.71
2.11
52.4
21.5
2.4
8.0
3.1
7.1
35.2
2.74
25.8
91.2
3.77
4.5
45.9
32.4
0.71
2.00
52.7
23.0
2.4
11.0
7.5
17.4
36.6
2.76
27.2
92.2
3.89
4.7
46.5
32.7
0.70
1.89
52.9
24.7
2.3
5.0
1.0
2.3
37.9
2.78
28.4
93.0
3.99
5.0
44.2
31.5
0.71
2.36
52.2
18.7
3.0
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
25.7
2.61
16.8
85.0
2.89
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
3.5
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
8.0
2.9
6.7
39.3
2.80
29.7
94.0
4.11
5.1
45.1
31.8
0.70
2.23
52.7
20.3
2.8
11.0
7.4
17.0
40.7
2.82
31.1
94.9
4.23
5.3
46.1
32.1
0.70
2.09
53.2
22.1
2.7
5.0
0.9
2.0
42.0
2.85
32.3
95.8
4.33
5.6
43.1
30.9
0.72
2.62
52.0
16.5
3.8
8.0
2.8
6.4
43.4
2.87
33.6
96.7
4.44
5.7
44.4
31.2
0.70
2.46
52.8
18.1
3.6
11.0
7.2
16.7
44.8
2.89
35.0
97.6
4.55
5.9
45.7
31.5
0.69
2.30
53.5
19.9
3.4
5.0
0.7
1.6
46.9
2.91
37.0
99.0
4.73
6.3
41.7
30.4
0.73
2.80
51.2
14.9
4.8
8.0
2.6
6.0
48.0
2.94
38.0
99.8
4.79
6.5
42.6
30.6
0.72
2.67
51.7
16.0
4.5
11.0
7.1
16.3
49.2
2.97
39.0
100.5
4.85
6.7
43.7
30.8
0.70
2.59
52.5
16.9
4.3
5.0
0.5
1.2
51.9
2.98
41.7
102.3
5.11
7.1
40.2
29.8
0.74
3.11
50.9
12.9
6.0
8.0
2.5
5.7
52.7
3.02
42.4
102.9
5.12
7.3
40.9
30.0
0.73
2.97
51.0
13.8
5.7
11.0
6.9
16.0
53.5
3.06
43.1
103.4
5.13
7.5
41.7
30.1
0.72
2.88
51.5
14.5
5.5
5.0
0.4
0.9
8.0
2.3
5.3
38.2
29.0
0.76
3.34
49.6
11.4
7.1
11.0
6.8
15.6
38.8
29.2
0.75
3.24
49.8
12.0
6.8
5.0
0.4
0.9
8.0
2.1
4.9
11.0
6.6
15.2
5.0
0.4
0.9
Operation not recommended
Operation not recommended
Operation not recommended
35.2
27.9
0.79
3.70
47.8
9.5
8.6
35.9
28.3
0.79
3.60
48.2
10.0
8.3
Operation not recommended
8.0
2.0
4.6
31.8
27.1
0.85
4.34
46.6
7.3
10.4
11.0
6.5
14.9
32.5
27.5
0.85
4.22
46.9
7.7
10.0
11/10/09
70
ARBOR SERIES SPECIFICATION CATALOG
ZS042 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (1400 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
psi
ft. hd.
5.0
1.6
3.8
8.0
3.6
8.2
11.0
8.0
18.5
5.0
1.5
3.4
8.0
3.4
7.8
30.0
2.61
21.1
87.8
3.37
3.7
43.6
31.7
0.73
1.71
49.4
25.5
---
11.0
7.9
18.1
31.0
2.66
21.9
88.5
3.42
3.8
44.2
32.3
0.73
1.61
49.7
27.5
---
5.0
1.3
3.0
8.0
3.2
7.5
33.4
2.67
24.2
90.1
3.66
4.0
45.7
32.7
0.72
1.85
52.0
24.7
---
11.0
7.7
17.8
34.8
2.71
25.5
91.0
3.77
4.1
46.3
33.2
0.72
1.75
52.3
26.5
---
5.0
1.2
2.7
35.5
2.72
26.2
91.5
3.83
4.4
47.1
33.4
0.71
2.11
54.3
22.4
2.4
8.0
3.1
7.1
37.0
2.74
27.7
92.5
3.96
4.5
47.8
33.8
0.71
2.00
54.6
23.9
2.4
11.0
7.5
17.4
38.5
2.76
29.1
93.5
4.10
4.7
48.4
34.1
0.70
1.89
54.8
25.7
2.3
5.0
1.0
2.3
39.9
2.78
30.4
94.4
4.20
5.0
46.0
32.8
0.71
2.36
54.1
19.5
3.0
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
27.0
2.61
18.1
85.9
3.04
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
3.5
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
8.0
2.9
6.7
41.4
2.80
31.8
95.3
4.33
5.1
47.0
33.1
0.70
2.23
54.6
21.1
2.8
11.0
7.4
17.0
42.9
2.82
33.2
96.3
4.45
5.3
48.0
33.5
0.70
2.09
55.1
23.0
2.7
5.0
0.9
2.0
44.2
2.85
34.5
97.2
4.55
5.6
44.9
32.2
0.72
2.62
53.8
17.2
3.8
8.0
2.8
6.4
45.7
2.87
35.9
98.2
4.68
5.7
46.3
32.5
0.70
2.46
54.6
18.8
3.6
11.0
7.2
16.7
47.2
2.89
37.4
99.2
4.79
5.9
47.6
32.8
0.69
2.30
55.4
20.7
3.4
5.0
0.7
1.6
49.4
2.91
39.5
100.7
4.97
6.3
43.4
31.6
0.73
2.80
53.0
15.5
4.8
8.0
2.6
6.0
50.6
2.94
40.5
101.5
5.04
6.5
44.4
31.9
0.72
2.67
53.6
16.6
4.5
11.0
7.1
16.3
51.8
2.97
41.6
102.2
5.11
6.7
45.6
32.1
0.70
2.59
54.4
17.6
4.3
5.0
0.5
1.2
54.6
2.98
44.4
104.1
5.37
7.1
42.0
31.0
0.74
3.11
52.6
13.5
6.0
8.0
2.5
5.7
55.5
3.02
45.2
104.7
5.39
7.3
42.6
31.2
0.73
2.97
52.8
14.3
5.7
11.0
6.9
16.0
56.3
3.06
45.9
105.2
5.40
7.5
43.5
31.4
0.72
2.88
53.3
15.1
5.5
5.0
0.4
0.9
8.0
2.3
5.3
39.8
30.2
0.76
3.34
51.2
11.9
7.1
11.0
6.8
15.6
40.5
30.5
0.75
3.24
51.5
12.5
6.8
5.0
0.4
0.9
8.0
2.1
4.9
11.0
6.6
15.2
5.0
0.4
0.9
Operation not recommended
Operation not recommended
Operation not recommended
36.7
29.1
0.79
3.70
49.3
9.9
8.6
37.4
29.5
0.79
3.60
49.7
10.4
8.3
Operation not recommended
8.0
2.0
4.6
33.2
28.2
0.85
4.34
48.0
7.6
10.4
11.0
6.5
14.9
33.9
28.6
0.84
4.22
48.3
8.0
10.0
11/10/09
71
ARBOR SERIES SPECIFICATION CATALOG
ZS048 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (1600 cfm)
WPD
EWT
°F
20
30
40
50
60
70
80
90
100
110
120
HEATING - EAT 70°F
COOLING - EAT 80/67°F
Flow
gpm
psi
ft. hd.
6.0
2.2
5.1
9.0
4.4
10.0
12.0
6.8
15.8
6.0
2.0
4.7
9.0
4.2
9.6
35.3
3.12
24.6
89.8
3.31
4.9
50.3
31.3
12.0
6.7
15.5
35.8
3.15
25.1
90.1
3.33
5.0
51.0
31.9
6.0
1.9
4.3
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
30.8
3.09
20.2
87.0
2.92
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
Operation not recommended
4.6
Operation not recommended
Operation not recommended
Operation not recommended
0.62
2.09
57.4
24.1
---
0.63
1.96
57.7
26.0
---
Operation not recommended
9.0
4.0
9.2
40.1
3.25
29.0
92.8
3.62
5.4
53.1
34.8
0.65
2.29
60.9
23.2
---
12.0
6.5
15.0
41.9
3.29
30.7
93.9
3.74
5.5
54.0
35.5
0.66
2.16
61.4
25.0
---
6.0
1.7
3.9
42.9
3.32
31.6
94.5
3.79
5.9
54.9
37.4
0.68
2.61
63.8
21.0
2.9
9.0
3.8
8.8
45.5
3.38
34.0
96.1
3.95
6.1
56.0
38.3
0.68
2.49
64.4
22.5
2.8
12.0
6.3
14.6
48.1
3.43
36.4
97.7
4.11
6.2
57.0
39.1
0.69
2.36
65.1
24.1
2.7
6.0
1.5
3.5
49.5
3.47
37.7
98.6
4.18
6.7
54.5
37.4
0.69
2.91
64.4
18.7
3.5
9.0
3.6
8.4
52.2
3.52
40.2
100.2
4.35
6.8
55.4
38.0
0.69
2.76
64.8
20.0
3.4
12.0
6.1
14.1
54.9
3.56
42.8
101.9
4.52
7.0
56.2
38.6
0.69
2.62
65.1
21.5
3.2
6.0
1.3
3.0
56.1
3.62
43.7
102.6
4.54
7.5
54.1
37.3
0.69
3.20
65.0
16.9
4.5
9.0
3.5
8.0
58.9
3.65
46.5
104.4
4.73
7.7
54.8
37.7
0.69
3.04
65.1
18.0
4.3
12.0
5.9
13.7
61.7
3.68
49.2
106.1
4.91
7.9
55.4
38.2
0.69
2.87
65.2
19.3
4.0
6.0
1.1
2.6
61.3
3.70
48.7
105.8
4.86
8.4
51.4
35.8
0.70
3.48
63.2
14.8
5.6
9.0
3.3
7.6
63.2
3.74
50.5
107.0
4.96
8.6
52.1
36.4
0.70
3.31
63.4
15.7
5.3
12.0
5.8
13.3
65.2
3.78
52.3
108.2
5.05
8.9
52.9
36.9
0.70
3.21
63.9
16.5
5.1
6.0
1.0
2.2
66.5
3.78
53.6
109.1
5.16
9.4
48.7
34.3
0.70
3.84
61.8
12.7
7.0
9.0
3.1
7.1
67.5
3.83
54.5
109.7
5.17
9.7
49.4
35.0
0.71
3.66
61.9
13.5
6.7
12.0
5.6
12.9
68.6
3.87
55.4
110.3
5.19
10.1
50.4
35.6
0.70
3.54
62.5
14.2
6.4
6.0
0.8
1.8
Operation not recommended
9.0
2.9
6.7
46.7
34.3
0.74
4.14
60.8
11.3
8.4
12.0
5.4
12.5
47.4
34.6
0.73
4.00
61.0
11.8
8.0
6.0
0.6
1.4
9.0
2.7
6.3
43.4
33.2
0.76
4.59
59.1
9.5
10.3
12.0
5.2
12.1
44.3
33.7
0.76
4.46
59.5
9.9
9.7
6.0
0.4
1.0
12.4
Operation not recommended
Operation not recommended
Operation not recommended
9.0
2.6
5.9
40.1
32.0
0.80
5.16
57.7
7.8
12.0
5.0
11.6
41.0
32.5
0.79
5.01
58.1
8.2
11.8
7/6/10
72
ARBOR SERIES SPECIFICATION CATALOG
ZS060 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (2000 cfm)
WPD
HEATING - EAT 70°F
COOLING - EAT 80/67°F
EWT
°F
Flow
gpm
9.0
3.8
8.7
20
12.0
6.3
14.5
15.0
9.7
22.5
9.0
3.6
8.4
12.0
6.1
14.1
43.8
3.89
30.5
88.3
3.30
5.9
72.0
49.1
0.68
2.86
15.0
9.6
22.2
46.5
4.01
32.8
89.5
3.39
6.1
73.0
50.0
0.68
2.68
30
40
50
60
70
80
90
100
110
120
psi
ft. hd.
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
41.9
3.96
28.4
87.4
3.10
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
81.8
25.2
---
82.2
27.2
---
Operation not recommended
5.5
Operation not recommended
Operation not recommended
9.0
3.5
8.0
12.0
6.0
13.7
49.7
4.03
Operation not recommended
35.9
91.0
3.62
6.6
70.8
48.8
Operation not recommended
0.69
3.01
81.0
23.5
---
15.0
9.4
21.7
52.2
4.12
38.1
92.2
3.71
6.7
71.8
49.5
0.69
2.87
81.6
25.0
---
9.0
3.3
7.6
54.6
4.10
40.6
93.3
3.90
7.1
68.5
48.0
0.70
3.24
79.6
21.1
3.9
12.0
5.8
13.4
56.2
4.16
42.0
94.0
3.96
7.3
69.5
48.5
0.70
3.15
80.3
22.0
3.7
15.0
9.2
21.3
57.8
4.22
43.4
94.8
4.01
7.5
70.5
48.9
0.69
3.06
81.0
23.0
3.5
9.0
3.1
7.3
62.2
4.25
47.7
96.8
4.28
8.0
67.3
47.0
0.70
3.54
79.3
19.0
4.8
12.0
5.6
13.0
64.3
4.31
49.6
97.8
4.37
8.3
68.2
47.6
0.70
3.44
79.9
19.8
4.6
15.0
9.1
21.0
66.4
4.36
51.5
98.8
4.46
8.5
69.1
48.3
0.70
3.35
80.5
20.6
4.4
9.0
3.0
6.9
69.8
4.40
54.8
100.3
4.64
9.0
66.0
46.0
0.70
3.83
79.1
17.2
6.0
12.0
5.5
12.6
72.4
4.45
57.2
101.5
4.76
9.3
66.9
46.8
0.70
3.73
79.6
17.9
5.7
15.0
8.9
20.6
75.0
4.50
59.6
102.7
4.88
9.5
67.7
47.6
0.70
3.63
80.1
18.6
5.4
9.0
2.8
6.5
76.2
4.50
60.9
103.3
4.97
10.2
62.2
45.0
0.72
4.35
77.0
14.3
7.6
12.0
5.3
12.3
78.2
4.55
62.7
104.2
5.04
10.5
63.1
45.7
0.72
4.15
77.2
15.2
7.2
15.0
8.8
20.2
80.1
4.60
64.4
105.1
5.10
10.7
64.1
46.3
0.72
4.01
77.8
16.0
6.8
9.0
2.7
6.1
82.7
4.59
67.1
106.3
5.29
11.4
58.4
43.9
0.75
4.76
74.7
12.3
9.5
12.0
5.2
11.9
84.0
4.65
68.1
106.9
5.30
11.8
59.3
44.6
0.75
4.54
74.8
13.1
9.0
15.0
8.6
19.9
85.3
4.70
69.2
107.5
5.31
12.2
60.5
45.0
0.74
4.39
75.5
13.8
8.6
9.0
2.5
5.8
12.0
5.0
11.5
56.1
43.4
Operation not recommended
0.77
5.05
73.4
11.1
11.2
15.0
8.4
19.5
57.0
43.7
0.77
4.89
73.7
11.7
10.6
9.0
2.3
5.4
12.0
4.8
11.2
15.0
8.3
19.1
9.0
2.2
5.0
12.0
4.7
10.8
48.0
39.9
0.83
6.15
15.0
8.1
18.8
49.0
40.5
0.83
5.97
Operation not recommended
Operation not recommended
52.3
41.8
0.80
5.53
71.2
9.5
13.8
53.4
42.4
0.79
5.38
71.8
9.9
13.1
69.0
7.8
16.6
69.4
8.2
Operation not recommended
15.9
7/6/10
73
ARBOR SERIES SPECIFICATION CATALOG
ZS070 - Performance Data
Single Speed Variable Speed ECM or 5-Speed ECM (2200 cfm)
WPD
HEATING - EAT 70°F
COOLING - EAT 80/67°F
EWT
°F
Flow
gpm
12.0
4.3
9.8
20
15.0
5.6
13.0
18.0
9.0
20.8
12.0
4.1
9.4
15.0
5.9
13.6
52.0
4.82
35.5
89.9
3.16
7.0
73.0
46.1
0.63
3.18
18.0
8.8
20.3
53.7
4.96
36.8
90.6
3.17
7.3
74.0
47.0
0.64
2.99
12.0
3.8
8.8
15.0
5.2
12.0
58.4
5.00
41.3
92.6
3.42
7.8
74.6
49.3
0.66
3.38
18.0
8.6
19.8
60.9
5.10
43.5
93.6
3.50
8.0
76.1
50.5
0.66
3.25
12.0
3.6
8.4
62.8
5.15
45.2
94.4
3.57
8.5
74.2
51.0
0.69
3.64
86.6
20.4
4.3
15.0
5.0
11.5
65.4
5.19
47.7
95.5
3.69
8.7
76.2
52.5
0.69
3.58
88.4
21.3
4.1
18.0
8.4
19.3
68.0
5.23
50.2
96.6
3.81
8.9
78.2
54.0
0.69
3.51
90.2
22.3
3.9
12.0
3.4
7.9
71.9
5.36
53.6
98.3
3.94
9.5
71.6
50.0
0.70
3.98
85.2
18.0
5.2
15.0
4.8
11.0
73.9
5.39
55.6
99.1
4.02
9.8
73.3
51.3
0.70
3.90
86.6
18.8
4.9
18.0
8.2
18.8
76.0
5.42
57.5
100.0
4.11
10.1
75.1
52.5
0.70
3.82
88.1
19.7
4.8
12.0
3.2
7.4
81.0
5.56
62.0
102.1
4.27
10.7
69.0
49.0
0.71
4.31
83.7
16.0
6.6
15.0
4.6
10.5
82.5
5.59
63.4
102.7
4.33
11.0
70.5
50.0
0.71
4.22
84.9
16.7
6.3
18.0
7.9
18.3
84.0
5.61
64.8
103.3
4.39
11.3
71.9
51.0
0.71
4.13
86.0
17.4
6.0
12.0
3.0
6.9
89.7
5.72
70.2
105.8
4.59
12.1
65.3
47.4
0.73
4.93
82.1
13.2
8.3
15.0
4.4
10.0
91.2
5.78
71.5
106.4
4.63
12.4
66.5
48.3
0.73
4.71
82.6
14.1
7.9
18.0
7.7
17.9
92.7
5.83
72.9
107.0
4.67
12.8
67.9
49.0
0.72
4.56
83.4
14.9
7.5
12.0
2.8
6.4
98.4
5.89
78.3
109.4
4.90
13.6
61.6
45.8
0.74
5.39
80.0
11.4
10.4
15.0
4.1
9.5
99.9
5.97
79.6
110.1
4.91
14.0
62.5
46.6
0.75
5.15
80.1
12.2
9.9
18.0
7.5
17.3
101.5
6.04
80.9
110.7
4.92
14.4
63.8
47.0
0.74
4.98
80.8
12.8
9.4
30
40
50
60
70
80
90
100
110
120
psi
ft. hd.
HC
MBtu/h
Power
kW
HE
MBtu/h
LAT
°F
COP
HWC
TC
SC
MBtu/h MBtu/h MBtu/h
Operation not recommended
46.0
4.88
29.3
87.4
2.76
S/T
Ratio
Power
kW
HR
MBtu/h
EER
HWC
MBtu/h
83.9
22.9
---
84.2
24.7
---
86.1
22.1
---
87.2
23.4
---
Operation not recommended
6.5
Operation not recommended
Operation not recommended
Operation not recommended
Operation not recommended
12.0
2.5
5.9
15.0
3.9
9.1
59.7
44.9
Operation not recommended
0.75
5.73
79.2
10.4
12.4
18.0
7.3
16.9
60.6
45.3
0.75
5.55
79.5
10.9
11.7
12.0
2.3
5.4
15.0
3.7
8.5
18.0
7.1
16.4
12.0
2.1
4.9
15.0
3.5
8.1
51.9
41.4
0.80
6.98
75.7
7.4
18.2
18.0
6.9
15.9
53.0
42.0
0.79
6.78
76.1
7.8
17.3
Operation not recommended
Operation not recommended
56.2
42.9
0.76
6.28
77.6
8.9
15.1
57.4
43.5
0.76
6.11
78.2
9.4
14.3
Operation not recommended
7/6/10
74
ARBOR SERIES SPECIFICATION CATALOG
Wiring Schematics
Aurora Base Control 208-230/60/1 PSC with GeoStart
Compressor
S
PSC
Blower
Motor
C
Black
R
Blue
Cap
Grn
Red
Run Winding
Pink
Active
Soft Start
Blue
Red
Brn Wht
Tan
Pink
Blue
Start Winding
Black
Common Winding
Unit Power Supply
208-230/60/1
G
Cap
P3
3 Airflow
Settings
H
M
T2
T1
CC
L2
L
Note 1
L1
Green (93)
Black
White
Black
1
RB
3
Black
Black (95)
L1
L1
Red (97)
L2
L2
L3
L3
Red
208V
Note 2
Blue
230V
Ground
Neutral
Disconnect
Black
Transformer
24V
Yellow
Black/White
Ÿ
Resistor
FD
CC
RB
LP
HP
T
RV
Black (10)
Black (09)
Blue (08)
Blue (07)
Yellow
Yellow
Orange (02)
Orange (01)
Black (15)
1
Violet (14)
White (12)
2
Black (13)
Note 3
Isolation
Valve
Ÿ
RV
3
DH W Y2 Y1 G O/B C
R LO P9
R
JW2
Red
(51)
Green
(50)
White
(52)
F FG CC CCG
CC2 CC2 CC2 P5
HI LO G
REV REV FP1 FP1 FP2 FP2 LPS LPS HPS HPS P4
C
P2
K3
ES
K4
LS
ALM
K1
R
K2
Black/White
Yellow
F
K5
ALG
PWM
ACC COM
ACC NO
ACC NC
K6
Aurora Base Control
(ABC)
LO
R
SW1
CFM
Status
G
C
Red (53)
Note 3
P13
Fault
R
C
O/B
G
FP1 – 15°F/30°F
FP2 – 15°F/30°F
RV – B/O
Acc – Dip 1
Acc – Dip 2
CC – Dual/Single
L – Pulse/Continuous
Reheat/Normal
Y1
Y2
W
DH
P1
LED4
F1
C
Config
Y
G
RS485 NET
R
RS485 EXP
RS485 NET
P8
C
R
A- B+ P7
R
A- B+ P6 N/A CO C EH1 C EH2 P3
Y1 G
CC
Legend
Factory Low Voltage Wiring
Factory Line Voltage Wiring
Field Low Voltage Wiring
Field Line Voltage Wiring
Optional Block
DC Voltage PCB Traces
Field Zone Sensor Wiring
Internal Junction
Quick Connect Terminal
Condensate
Aurora LED Flash Codes
Field Wiring Lug
Switch - High pressure
Switch - Low pressure
1
L1
Relay Coil
Switch - Condensate Overflow
2
1 second on and 1 second off
100 milliseconds on and 100 milliseconds off
100 milliseconds on and 400 milliseconds off with a 2 second pause before repeating
Random Start Delay
Fast Flash
Status LED (LED1, Green)
Fast Flash
Configuration LED (LED2, Yellow)
Fast Flash
Fault LED (LED3, Red)
Configuration LED (LED2, Yellow)
Fault LED (LED3, Red)
Status LED (LED1, Green)
OFF
No Software Overide
Flash ECM Setting Normal Mode
ON
Normal Mode
Flash Code 1
DIP Switch Overide
Slow Flash
Input Fault Lockout
OFF
Control is Non-Functional
Flash Code 2
Fast Flash
High Pressure Lockout
Slow Flash ECM Configure Mode
Test Mode
Flash Code 3
Off
Low Pressure Lockout
Fast Flash Reset Configure Mode
Lockout Active
Flash Code 4
Low Air Coil Limit Lockout - FP2
Flash Code 2
Dehumidification Mode
Low Water Coil Limit Lockout - FP1 Flash Code 5
Flash Code 3
Reserved
Flash Code 6
Reserved
Flash Code 4
Reserved
Flash Code 7
Flash Code 5
Condensate Overflow Lockout
Load Shed
Flash Code 8
Over/Under Voltage Shutdown
Flash Code 6
ESD
Flash Code 9
Reserved
Flash Code 7
Reserved
Flash Code 10
Reserved
Flash Code 11
Air/Water Coil Limit Sensor Error
Slow Flash
Fast Flash
Flash Code
Thermistor
T
3
Aurora Timing Events
Test Mode
Normal Mode
Event
5 to 80 seconds
1 second
Random Start Delay
5 seconds
< 1 second
Compressor On Delay
2 minutes
5 seconds
Compressor Minimum On Time
4 minutes
15 seconds
Compressor Short Cycle Delay
30 seconds
2 seconds
Blower Off Delay
Less than 1 second Less than 1 second
Fault Recognition Delay – High Pressure
2 minutes
30 seconds
Start-Up Bypass – Low Pressure
30 seconds
30 seconds
Fault Recognition Delay – Low Pressure
2 minutes
30 seconds
Start-Up Bypass – Low Water/Air Coil Limit
30 seconds
30 seconds
Fault Recognition Delay – Low Water/Air Coil Limit
30 seconds
30 seconds
Fault Recognition Delay – Condensate Overflow
2 seconds
2 seconds
Thermostat Call Recognition Time
5 minutes
20 seconds
Auxiliary Heat Staging Delay
2 minutes
7.5 seconds
Emergency Heat Staging Delay
90 seconds
90 seconds
Water Valve Slow Open Delay
30 seconds
30 seconds
Reheat Delay
C
Notes:
1 – Optional, factory installed unit mounted disconnect.
2 – Swap blue and red leads for 208V operation.
3 – Optional, factory installed internal isolation valve.
Brown (23)
Green
Accessory Relay
Operation
SW2-4 SW2-5
On
On
Cycle with Blower
Off
Off
Cycle with Compressor
Off
On
Water Valve Slow Open
Off
On
Outdoor Air Damper
On
1
2
3
4
5
6
7
8
SW2
LED5
G
Off
Polarized connector
Ground
G
Light Emitting Diode - Green
Capacitor
Y
Light Emitting Diode - Yellow
Fuse
R
Light Emitting Diode - Red
Relay Contacts – N.O., N.C.
CC – Compressor Contactor
CO – Condensate Overflow Sensor
ES – Emergency Shutdown
HP – High Pressure Switch
LP – Low Pressure Switch
FD – Freeze Detection Sensor
F1 – Fuse
SW1 – Push button
SW2 – DIP package 8 position
RB – Blower Relay
RV – Reversing Valve Coil
97P817-02
75
11/08/10
ARBOR SERIES SPECIFICATION CATALOG
Wiring Schematics cont.
Aurora Base Control 460/60/3 5-Speed ECM
T3
Note 4
T1
T2
Red
Phase
Guard
Monitor
(PGM)
L1 L2 L3
Black
Yellow
T3
T2
Unit Power Supply
460/60/3
G
T1
CC
L3
L2
L1
Note 1
Black (7)
Green (93)
White (8)
Red (9)
Ground
Neutral
Disconnect
L1
L1
Yellow (96)
L2
L2
Red (97)
L3
L3
Green
G
Black (95)
Black
N
Brown
Orange
5-Speed ECM
Blower
Motor
L
Blue
460V
Note 5
Transformer
PGM
Y-OUT
Y
5
24V
4
3
2
1
C
Black/White
C
Yellow
Note 5
Black/White (92)
Note 6
Yellow (91)
Gray (30)
Tan (31)
Red (32)
Blue (33)
Black (35)
RV
Ÿ
Resistor
FD
LP
HP
Ÿ
T
RV
CC
Note 2
REV REV FP1 FP1 FP2 FP2 LPS LPS HPS HPS P4
C
P2
K3
ES
K4
LS
ALM
5-Speed ECM Low Voltage Connections
Model TAP-1 TAP-2 TAP-3 TAP-4 TAP-5
015
Blue
Red
Gray
018
Blue
Red
Gray
023
Blue
Red
Gray
024
Blue
Red
Gray
030
Blue
Red
Gray
036
Blue
Red
Gray
041
Blue
Red
Gray
042
Blue
Red
Gray
048
Blue
Red
Gray
060
Blue
Red
Gray
070
Blue
Red
Gray
Black (10)
Black (09)
Blue (08)
CC2 CC2 CC2 P5
HI LO G
Blue (07)
F FG CC CCG
Yellow
R
Yellow
R LO P9
JW2
DH W Y2 Y1 G O/B C
Orange (02)
3
Orange (01)
1
Red
(51)
Green
(50)
White
(52)
Black (15)
2
Violet (14)
Isolation
Valve
K1
R
K2
Black/White
Yellow
F
K5
ALG
PWM
ACC COM
ACC NO
ACC NC
K6
Aurora Base Control
(ABC)
LO
R
CFM
SW1
Status
G
Notes:
C
Red (53)
Note 2
P13
Fault
R
C
O/B
G
FP1 – 15°F/30°F
FP2 – 15°F/30°F
RV – B/O
Acc – Dip 1
Acc – Dip 2
CC – Dual/Single
L – Pulse/Continuous
Reheat/Normal
Y1
Y2
W
DH
P1
LED4
F1
LED5
G
C
Config
Y
G
RS485 NET
R
RS485 EXP
RS485 NET
P8
C
R
A- B+ P7
A- B+ P6 N/A CO C EH1 C EH2 P3
Y1 G
CC
Legend
Factory Low Voltage Wiring
Factory Line Voltage Wiring
Field Low Voltage Wiring
Field Line Voltage Wiring
Optional Block
DC Voltage PCB Traces
Field Zone Sensor Wiring
Internal Junction
Quick Connect Terminal
Condensate
Field Wiring Lug
Switch - High pressure
Switch - Low pressure
1
L1
Relay Coil
Switch - Condensate Overflow
2
Aurora LED Flash Codes
1 second on and 1 second off
100 milliseconds on and 100 milliseconds off
100 milliseconds on and 400 milliseconds off with a 2 second pause before repeating
Random Start Delay
Fast Flash
Status LED (LED1, Green)
Fast Flash
Configuration LED (LED2, Yellow)
Fast Flash
Fault LED (LED3, Red)
Configuration LED (LED2, Yellow)
Fault LED (LED3, Red)
Status LED (LED1, Green)
OFF
No Software Overide
Flash ECM Setting Normal Mode
Normal Mode
ON
DIP Switch Overide
Slow Flash
Input Fault Lockout
Flash Code 1
OFF
Control is Non-Functional
Flash Code 2
Fast Flash
High Pressure Lockout
Test Mode
Slow Flash ECM Configure Mode
Flash Code 3
Low Pressure Lockout
Off
Fast Flash Reset Configure Mode
Lockout Active
Flash Code 4
Low Air Coil Limit Lockout - FP2
Flash Code 2
Dehumidification Mode
Low Water Coil Limit Lockout - FP1 Flash Code 5
Flash Code 3
Reserved
Flash Code 6
Reserved
Flash Code 4
Reserved
Flash Code 7
Condensate Overflow Lockout
Flash Code 5
Load Shed
Over/Under Voltage Shutdown
Flash Code 8
ESD
Flash Code 6
Flash Code 9
Reserved
Flash Code 7
Reserved
Flash Code 10
Reserved
Flash Code 11
Air/Water Coil Limit Sensor Error
Slow Flash
Fast Flash
Flash Code
Thermistor
T
3
Aurora Timing Events
Test Mode
Normal Mode
Event
5 to 80 seconds
1 second
Random Start Delay
5 seconds
< 1 second
Compressor On Delay
2 minutes
5 seconds
Compressor Minimum On Time
4 minutes
15 seconds
Compressor Short Cycle Delay
30 seconds
2 seconds
Blower Off Delay
Less than 1 second Less than 1 second
Fault Recognition Delay – High Pressure
2 minutes
30 seconds
Start-Up Bypass – Low Pressure
30 seconds
30 seconds
Fault Recognition Delay – Low Pressure
2 minutes
30 seconds
Start-Up Bypass – Low Water/Air Coil Limit
30 seconds
30 seconds
Fault Recognition Delay – Low Water/Air Coil Limit
30 seconds
30 seconds
Fault Recognition Delay – Condensate Overflow
2 seconds
2 seconds
Thermostat Call Recognition Time
5 minutes
20 seconds
Auxiliary Heat Staging Delay
2 minutes
7.5 seconds
Emergency Heat Staging Delay
90 seconds
90 seconds
Water Valve Slow Open Delay
30 seconds
30 seconds
Reheat Delay
R
Brown (23)
Green
Accessory Relay
Operation
SW2-4 SW2-5
On
On
Cycle with Blower
Off
Off
Cycle with Compressor
Off
On
Water Valve Slow Open
Off
On
Outdoor Air Damper
C
On
1
2
3
4
5
6
7
8
SW2
Off
1 - Optional, factory installed unit mounted disconnect.
2 - Optional, factory installed internal isolation valve.
3 - Optional, factory installed phase guard.
4 - Optional, factory installed phase guard. The yellow transformer wire shall
be connected directly to the CPU board, if this option is not installed.
5 - Refer to the 5-Speed ECM Low Voltage Connection Table.
6 - Wire is provided with the unit but not connected to the 5-Speed ECM.
Polarized connector
Ground
G
Light Emitting Diode - Green
Capacitor
Y
Light Emitting Diode - Yellow
Fuse
R
Light Emitting Diode - Red
Relay Contacts – N.O., N.C.
CC – Compressor Contactor
CO – Condensate Overflow Sensor
ES – Emergency Shutdown
HP – High Pressure Switch
LP – Low Pressure Switch
FD – Freeze Detection Sensor
F1 – Fuse
SW1 – Push button
SW2 – DIP package 8 position
RB – Blower Relay
RV – Reversing Valve Coil
PGM – Phase Guard Monitor
RH – Reheat Valve Coil
97P819-07
76
3/8/12
77
2
Polarized connector
11/13/09
Occupied Switch
Power blocks
Pump Relay
Blower Relay
Rectified Solenoid Compressor Plug
Reversing Valve coil
Terminal Board
Freeze Detection
Phase Guard Module
Blue (10)
PB2
2
1
3
Note 1
OS
ES
Blue (32)
LP
Note 14
DF/FP
CP
31
32
Gray (65)
Yellow (51 )
Yellow/White (52)
38
DI8
DI7
47
48
Blue (72)
Yellow (21 )
Orange (30)
Pink (25)
Black/White (29)
DI5
52
DI1
9VDC
55
56
DI2
54
DI3
DI4
DI6
51
Gray (26)
Blue (27)
53
50
Red (24)
Violet (23)
DI 3/4/5/6/ Com
DI9
46
J9
DI10
45
Green (70)
Orange (71)
49
DI11
Black (22)
DI12
44
24VAC Com
43
Black (5)
42
PWM1
41
Gray/White (14)
Gray (68)
PWM2 Com
40
J10
5VDC
37
PWM2
LED
36
Orange/White (67)
39
AI1
+
35
Yellow (50 )
5VDC
34
Yellow/Red (53)
Orange (66)
J7
A11
A13
A23
OS Compressor Contactor
Condensate Overflow Sensor
PB1, PB2 Compressor Proving
PRCompressor Solenoid
RBDischarge Air Temperature Sensor
RCP Dirty Filter or Blower Proving
RV Dehumidification Switch or Humidistat TB FD Emergency Shutdown
PGM High Pressure Switch
Low Pressure Switch
Compressor Solenoid
Closed Jumper
3
Rectified Compressor
Solenoid Plug
P
1
Open Jumper
Ground
30
A15
Blue (10)
Yellow (50 )
Black (5)
Johnson FX-10
A31
Relay ContactsN.O., N.C.
Note 6
29
J2
AI2
+
28
Black/Red (64)
1K
AI6
+
27
Black (63)
33
AI4
+
26
20
Black (F20)
D01
D02
1
2
3
4
5
6
7
8
9
10
D04
D03
11
12
13
14
15
16
D05
D0
6
D07
18
D08
17
19
D09
Black (F1)
Black (F2)
Black (F3)
Black (F4)
Black (F5)
Black (F6)
Black (F7)
Black (F8)
Black (F9)
1
2
3
4
5
6
7
8
9
10
11
Black (F11)
Black (F10)
12
13
14
15
16
Black (F12)
Black (F13)
Black (F14)
Black (F15)
Black (F16)
17
18
Black (F18)
Black (F17)
19
Black (F19)
20
Yellow (20 )
Black (1)
Yellow (J1)
Violet (3)
White (4)
Black (5)
Black (6)
Orange (7)
Yellow (J1)
Yellow (J2)
Blue (10)
Gray (11)
Yellow (12 )
Brown (13)
Violet (15)
Yellow (J2)
Yellow (17 )
Yellow (18 )
Gray (19)
Note 5
HP
RB
CC
Black (74)
Black/
White
(43)
Violet (28)
Yellow (12)
2
3
1
PB1
Black/White (43)
Orange (40)
RV
Note 5
Black/White (36)
Yellow (18 )
Violet (15)
Black/White (36)
Green/Yellow (37)
A21
Switch - Low pressure
T
T
25
AI3
+
AI5
+
5VDC
Black (34)
Brown (13)
Red (33)
Black (34)
Yellow
Black/White
Red (33)
A
Blue 230 V 265V
Red 208V
Unit Power Supply
208-230-265/60/1
G
Yellow (35 )
Yellow (20 )
Yellow (17 )
A12
Switch - High pressure
Note 7
DA
J8
White (62)
White/Blue (62)
24
23
Brown (61)
Brown (60)
11K
Note 13
L3
L3
Red (97)
Black
L2
L1
L2
Black (95)
L1
Ground
Neutral
Disconnect
Note 9
Green (93)
Transformer
Yellow (35 )
A22
Field wire lug
Black (LC2)
FD
Black (73)
White
A25
Quick connect terminal
3
11
Black (LC1)
Orange/White (67)
CO
1
L1
CC
A24
A14
Switch - Condensate overflow
15
Black (RS)
Orange (66)
Gray (65)
RB
Black
T1
C
A32
A35
Capacitor w/ bleed resistor
Relay coil
7
3
L2
T2
Red
R
A33
97P801-02
CC CO CP CS DA DF/FP
DH ES HP LP -
Factory Low voltage wiring
Factory Line voltage wiring
Field low voltage wiring
Field line voltage wiring
Optional block
DC Voltage PCB traces
Field Zone Sensor Wiring
14
Blue (72)
4
Black (AIC)
Yellow (21 )
10
Black (SS)
Orange (71)
Green (70)
Yellow (18 )
Violet (15)
Brown (13)
Black (34)
Red (33)
9
2
13
5
12
1
6
B
L
Black
H M
S
Blue (55)
Blue
24VAC Com
Internal junction
Black (44)
Black (31)
Black (Y2)
Black (Y1)
Black (O)
3
3 Airflow
Settings
Cap
Brn Wht
Cap
24VAC
Legend
Alarm Circ B(LC2)
Alarm Circ A(LC1)
Temp Occ(TO)
Sensor COM(SC)
Room Sensor(RS)
AI COM (AIC)
Setpoint Shift(SS)
Black (X2)
Note 3
Black (G)
Black (X1)
Note 2
Black (L)
Black (C)
Black (R)
1
Red
(87)
Green
(86)
White
(88)
2
Note 12
Isolation
Valve
Grn
PSC
Blower
Motor
Compressor
GROUND
A34
RCP
L1
Zone Sensor Terminal 6
Zone Sensor Terminal 5
Zone Sensor Terminal 2
Zone Sensor Terminal 3
Zone Sensor Terminal 1
Comp (Y2)
Comp (Y1)
Rev Valve (O)
Blower (G)
Acc 2 (X2)
Acc 1 (X1)
Alarm (L)
24 V COM (C)
Green/Yellow (38)
Note 4
TB
Terminal Board
24VAC (R)
1 – Disconnect for 15 degree freeze detection limit
2 – Acc1 output is cycled with the compressor
3 – Acc2 output is cycled with the blower
.
4 – R, C, Y1, Y2 , and G inputs are for use with a wall mount thermostat
. TO, SC, RS, AIC, and SS
are for use with a TAXXJ02 zone sensor
5 – Network controllable 24VAC output.
6 – Network controllable PWM output
.
7 – Wire #52 can be used to connect a field supplied and installed 0-5 VDC humidity transmitter
.
8 – Not Used – Bundle in the air handler
9 – Optional, factory installed unit mounted disconnect
12 – Optional, factory installed internal isolation valve
13 – Swap blue and red leads for 208V operation
14 – Network configurable input
P3
Notes:
Black (74)
Yellow (50)
10
P12
15
12
3
Note 8
1
Green /Yellow (57)
ARBOR SERIES SPECIFICATION CATALOG
Wiring Schematics cont.
FX10 Control 208-230-265/60/1 PSC
78
2
3/19/12
Occupied Switch
Power blocks
Pump Relay
Blower Relay
Rectified Solenoid Compressor Plug
Reversing Valve coil
Terminal Board
Freeze Detection Sensor
Phase Guard Module
Reheat Valve Coil
Closed Jumper
Blue (10)
Black (76)
1
2
3
PB2
Note 1
OS
ES
Blue (32)
LP
DF/BP
J9
45
Green (70)
51
52
Gray (26)
56
55
Black/White (29)
Orange (30)
54
Pink (25)
53
Red (24)
Blue (27)
50
Violet (23)
49
48
Yellow (21)
Black (22)
DI8
Blue (72)
DI1
9VDC
DI2
DI3
DI4
DI5
DI6
DI 3/4/5/6/ Com
DI7
DI9
46
47
Orange (71)
J7
A11
97P802-09
3
OS PB1, PB2 PRRBRCP RV TB FD PGM RH -
1
Compressor Contactor
Condensate Overflow Sensor
Compressor Proving
Compressor Solenoid
Discharge Air Temperature Sensor
Dirty Filter or Blower Proving
Dehumidification Switch or Humidistat
Emergency Shutdown
High Pressure Switch
Low Pressure Switch
Compressor Solenoid
Rectified Compressor
Solenoid Plug
Open Jumper
Polarized connector
DI11
DI10
DI12
44
24VAC Com
43
A23
CC CO CP CS DA DF/BP
DH ES HP LP -
RCP
P
J10
PWM1
PWM2 Com
PWM2
Black (5)
42
41
40
39
5VDC
Blue (10)
Blue
Yellow (50)
Black (5)
Johnson FX-10
A31
Relay ContactsN.O., N.C.
1K
J2
38
Gray/White (14)
Gray (68)
Yellow (50)
AI1
+
Orange/White (67)
LED
Orange (66)
5VDC
36
35
Yellow/Red (53)
37
33
34
Yellow/White (52)
AI2
+
32
Yellow (51)
AI4
+
AI6
+
31
29
Gray (65)
27
28
Black/Red (64)
AI5
+
AI3
+
30
Black (63)
26
White/Blue (62)
25
A33
Ground
Field wire lug
CP
T
T
23
24
White (62)
A21
Switch - Low pressure
Note 6
Note 7
DA
11K
Brown (61)
Brown (60)
Black
20
Yellow (20)
L3
L2
L1
Note 5
RH
Red (97)
Yellow (96)
Black (95)
Blue 460V
Black
Note 9
Green (93)
Gray (94)
L2
L3
L3
Yellow
Black/White
L1
L2
Ground
Neutral
Disconnect
L1
Yellow (18)
Violet (15)
Brown (13)
Black (34)
A
Red (56)
Blue (55)
Black (54)
N
PB3
Black (34)
Black (F20)
Orange
Brown
Red (33)
Red (56)
Blue (55)
Black (54)
Red (9)
White (8)
Black (7)
Phase
Guard
Monitor
(PGM)
L1 L2 L3
Red (33)
L1
T1
D01
D02
D03
10
D04
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
D05
D0
6
D07
18
D08
17
19
D09
Black (F1)
Black (F2)
Black (F3)
Black (F4)
Black (F5)
Black (F6)
Black (F7)
Black (F8)
Black (F9)
1
2
3
4
5
6
7
8
9
10
11
Black (F11)
Black (F10)
12
13
14
15
16
Black (F12)
Black (F13)
Black (F14)
Black (F15)
Black (F16)
17
18
Black (F18)
Black (F17)
19
Black (F19)
20
Black (1)
Yellow (J1)
Violet (3)
White (4)
Black (5)
Black (6)
Orange (7)
Yellow (J1)
Yellow (J2)
Blue (10)
Gray (11)
Yellow (12)
Brown (13)
Violet (15)
Yellow (J2)
Yellow (17)
Yellow (18)
Gray (19)
HP
CC
CS
Dual
Capacity
Units
Only
Black/White (43)
Note 10
Black/
White
(92)
RCP
Gray (75)
Orange (40)
RV
Blue
Y
C
Black/
White
(43)
Violet (28)
Violet (3)
Yellow (12)
3
2
1
PB1
Black/
White
(92)
Yellow (91)
Note 11
PGM
Y-OUT
Unit Power Supply
460/60/3 w/Neutral
G
Black/White (36)
Green/Yellow (37)
A12
Switch - High pressure
Black (76)
Gray (26)
CO
Yellow
T2
L2
CC
Note 10
Black/White (36)
Red
T1
Yellow (35)
Yellow (20)
Yellow (17)
L3
T3
T2
Compressor
T3
Yellow (35)
A22
Quick connect terminal
Black (LC2)
FD
P11
5VDC
A15
A25
Internal junction
3
11
Black (LC1)
Orange/White (67)
J8
1
A32
A24
Switch - Condensate overflow
15
Black (RS)
Orange (66)
Brown
A14
A35
Capacitor w/ bleed resistor
Relay coil
7
Black (AIC)
Gray (65)
Blue (72)
4
14
Yellow (21)
10
Black (SS)
Orange (71)
Green (70)
Yellow (18)
9
2
13
Violet (15)
Brown (13)
Black (34)
Red (33)
2
Green
Orange
3
24VAC Com
Factory Low voltage wiring
Factory Line voltage wiring
Field low voltage wiring
Field line voltage wiring
Optional block
DC Voltage PCB traces
Field Zone Sensor Wiring
Black (44)
Black (31)
Black (Y2)
Black (Y1)
Black (O)
5
12
1
6
B
4
24VAC
Legend
Alarm Circ B (LC2)
Alarm Circ A (LC1)
Temp Occ (TO)
Sensor COM (SC)
Room Sensor (RS)
AI COM (AIC)
Setpoint Shift (SS)
Black (X2)
Note 3
Black (G)
Black (X1)
Note 2
Black (L)
Black (C)
Black (R)
3
Green
(86)
White
(88)
1
5
GROUND
A34
L1
Reheat Enable
(Dehumidistat)
Zone Sensor Terminal 6
Zone Sensor Terminal 5
Zone Sensor Terminal 2
Zone Sensor Terminal 3
Zone Sensor Terminal 1
Comp (Y2)
Comp (Y1)
Rev Valve (O)
Blower (G)
Acc 2 (X2)
Acc 1 (X1)
Alarm (L)
24V COM (C)
Note 4
TB
Terminal Board
24VAC (R)
Green/Yellow (38)
Red
(87)
2
Note 12
Isolation
Valve
ECM
Blower Motor
Transformer
Notes:
1 - Disconnect for 15 degree freeze detection limit.
2 - Acc 1 output is cycled with the compressor.
3 - Acc 2 output is cycled with the blower.
4 - R, C, Y1, Y2, and G inputs are for use with a wall mount thermostat. TO, SC, RS, AIC, and
SS are for use with a TAXXJ02 zone sensor.
5 - Network controllable 24VAC output.
6 - Network controllable PWM output.
7 - Wire #52 can be used to connect a field supplied and installed 0-5 VDC humidity transmitter.
9 - Optional, factory installed unit mounted disconnect
10 - Optional, factory installed phase guard
11 - Optional, factory installed phase guard. The yellow transformer wire shall be connected
directly to the PB1-1 board, if this option is not installed.
12 - Optional, factory installed internal isolation valve.
Yellow (50)
10
P12
15
12
3
1
Variable Speed
ECM Blower
Motor
Green/Yellow (57)
ARBOR SERIES SPECIFICATION CATALOG
Wiring Schematics cont.
FX10 Control 460/60/3 Variable Speed ECM
A13
Notes:
79
3/8/12
2
97P822-04
3
OS PB1, PB2 PRRBRCP RV TB FD PGM RH -
1
Compressor Contactor
Condensate Overflow Sensor
Compressor Proving
Compressor Solenoid
Discharge Air Temperature Sensor
Dirty Filter or Blower Proving
Dehumidification Switch or Humidistat
Emergency Shutdown
High Pressure Switch
Low Pressure Switch
Compressor Solenoid
Rectified Compressor
Solenoid Plug
Occupied Switch
Power blocks
Pump Relay
Blower Relay
Rectified Solenoid Compressor Plug
Reversing Valve coil
Terminal Board
Freeze Detection Sensor
Phase Guard Module
Reheat Valve Coil
Closed Jumper
Blue (10)
Tan
1
2
3
PB2
Note 1
OS
ES
Blue (32)
LP
Note 14
DF/BP
Yellow (21)
Red (24)
Violet (23)
52
51
55
56
54
Orange (30)
Black/White (29)
53
Pink (25)
Blue (27)
Gray (26)
50
49
48
Blue (72)
Black (22)
46
47
Orange (71)
45
44
43
42
41
Green (70)
Black (5)
Gray/White (14)
Gray (68)
J9
J10
DI1
9VDC
DI2
DI3
DI4
DI5
DI6
DI 3/4/5/6/ Com
DI7
DI8
DI9
DI10
DI11
DI12
24VAC Com
PWM1
PWM2 Com
PWM2
A13
A23
CC CO CP CS DA DF/BP
DH ES HP LP -
RCP
CP
Note 6
40
A11
J7
Blue (10)
Yellow (50)
Black (5)
Johnson FX-10
A31
Open Jumper
Polarized connector
Switch - Low pressure
38
J2
36
37
Orange/White (67)
39
35
Orange (66)
1K
LED
5VDC
34
Yellow/Red (53)
Yellow (50)
AI1
+
33
5VDC
AI2
+
32
Yellow/White (52)
AI4
+
Yellow (51)
29
Black/Red (64)
31
28
Black (63)
AI5
+
AI3
+
Gray (65)
27
AI6
+
26
White/Blue (42)
30
25
White (62)
24
Brown (61)
Brown (60)
5VDC
A21
Switch - High pressure
T
T
J8
Tan
Yellow (18)
Violet (15)
20
Black (F20)
Yellow (20)
Note 5
D01
D02
D03
1
2
3
4
5
6
7
8
9
11
10
D04
12
13
14
15
16
D05
D0
6
D07
18
D08
17
19
D09
Black (F1)
Black (F2)
Black (F3)
Black (F4)
Black (F5)
Black (F6)
Black (F7)
Black (F8)
Black (F9)
1
2
3
4
5
6
7
8
9
10
11
Black (F11)
Black (F10)
12
13
14
15
16
Black (F12)
Black (F13)
Black (F14)
Black (F15)
Black (F16)
17
18
Black (F18)
Black (F17)
19
20
Black (F19)
Black (1)
Yellow (J1)
Violet (3)
White (4)
Black (5)
Black (6)
Orange (7)
Yellow (J1)
Yellow (J2)
Blue (10)
Gray (11)
Yellow (12)
Brown (13)
Violet (15)
Yellow (J2)
Yellow (17)
Yellow (18)
Gray (19)
HP
CC
Red
Black/White (43)
Orange (40)
RV
Note 5
Y
Note 10
Black/
White
(92)
Orange
Black/White (36)
Green/Yellow (37)
A12
Switch - Condensate overflow
Note 7
DA
FD
23
Black (34)
Brown (13)
Red (33)
Black (34)
Yellow
Black/White
Brown
Red (33)
A
L3
L2
Blue 460V
Black
L3
L1
Black/White (36)
A22
Ground
11
Black (LC2)
Orange/White (67)
11K
A15
A25
Field wire lug
3
Black (LC1)
CO
Red (97)
L2
L1
Black (95)
Yellow (96)
Ground
Neutral
Disconnect
Note 9
Green (93)
Unit Power Supply
460/60/3
G
Yellow (35)
Yellow (20)
Yellow (17)
Red (9)
White (8)
Black (7)
Phase
Guard
Monitor
(PGM)
L1 L2 L3
Transformer
Yellow (35)
A33
Relay ContactsN.O., N.C.
15
Black (RS)
Orange (66)
Gray (65)
A32
A24
Quick connect terminal
7
A14
A35
Capacitor w/ bleed resistor
Relay coil
14
Blue (72)
4
Black (AIC)
Yellow (21)
10
Black (SS)
Orange (71)
Green (70)
Yellow (18)
9
2
13
Violet (15)
24VAC Com
Internal junction
P
Legend
Black (44)
Black (31)
Black (Y2)
Black (Y1)
Black (O)
Black (G)
5
Brown (13)
Black (34)
L1
T1
Black
24VAC
Factory Low voltage wiring
Factory Line voltage wiring
Field low voltage wiring
Field line voltage wiring
Optional block
DC Voltage PCB traces
Field Zone Sensor Wiring
Alarm Circ B (LC2)
Alarm Circ A (LC1)
Temp Occ (TO)
Sensor COM (SC)
Room Sensor (RS)
AI COM (AIC)
Setpoint Shift (SS)
Comp (Y2)
Comp (Y1)
Rev Valve (O)
Black (X2)
12
1
Red (33)
T2
L2
CC
T1
GROUND
A34
L1
Zone Sensor Terminal 6
Zone Sensor Terminal 5
Zone Sensor Terminal 2
Zone Sensor Terminal 3
Zone Sensor Terminal 1
Note 3
Acc 2 (X2)
Black (X1)
Black (L)
Black (C)
B
6
T3
L3
Yellow
T2
Note 10
4
3
1
C
Page 1
Black
10
P12
Yellow (50)
Violet (3)
12
3
1
Note 8
15
Black/
White
(43)
2
Green/Yellow (57)
Blue
Note 15
5
5-Speed ECM
Blower
Motor
Violet (28)
Yellow (12)
3
2
1
PB1
Black/
White
(92)
C
Yellow (91)
Note 11
PGM
Y-OUT
Green
L
Blower (G)
Note 2
Acc 1 (X1)
Alarm (L)
24V COM (C)
Black (R)
3
Green
(86)
White
(88)
1
Red
T3
Compressor
N
Note 4
TB
Terminal Board
24VAC (R)
Red
(87)
2
Note 12
Isolation
Valve
5-Speed ECM Low Voltage Connections
Model TAP-1 TAP-2 TAP-3 TAP-4 TAP-5
015
Blue
Red
Gray
018
Blue
Red
Gray
023
Blue
Red
Gray
024
Blue
Red
Gray
030
Blue
Red
Gray
036
Blue
Red
Gray
041
Blue
Red
Gray
042
Blue
Red
Gray
048
Blue
Red
Gray
060
Blue
Red
Gray
070
Blue
Red
Gray
G
Green/Yellow (38)
1 – Disconnect for 15 degree freeze detection limit.
2 – Acc 1 output is cycled with the compressor.
3 – Acc 2 output is cycled with the blower.
4 – R, C, Y1, Y2, and G inputs are for use with a wall mount thermostat.
TO, SC, RS, AIC, and SS are for use with a TAXXJ02 zone sensor.
5 – Network controllable 24VAC output.
6 – Network controllable PWM output.
7 – Wire #52 can be used to connect a field supplied and installed 0-5 VDC
humidity transmitter.
8 – Not Used – Bundle in the air handler.
9 – Optional, factory installed unit mounted disconnect
10 – Optional, factory installed phase guard
11 – Optional, factory installed phase guard. The yellow transformer wire
shall be connected directly to the PB1-1, if this option is not installed.
12 – Optional, factory installed internal isolation valve.
14 – Network configurable input.
15 – Refer to the 5-Speed ECM Motor Low Voltage Connection Table.
ARBOR SERIES SPECIFICATION CATALOG
Wiring Schematics cont.
FX10 Control 460/60/3 5-Speed ECM
Tan
Red
ARBOR SERIES SPECIFICATION CATALOG
Wiring Schematics cont.
Hot Gas Reheat
Humidity Sensor
Terminal Block
Io Vin Gnd Vo
Connect to C on the Low Volt Terminal Board
Connect to R on the Low Volt Terminal Board
NOTE: Reversing these two wires will
cause the transformer breaker to trip
J8
23
AI4
+
28
29
5VDC
PWM2
40
PWM2 Com
41
PWM1
46
DI9
47
DI8
48
DI7
13
14
D05
11
D04
10
9
Johnson FX-10
DI12
DI11
D0
6
12
24VAC Com
44
45
15
A15
J10
D07
A11
A13
A23
J2
39
18
A33
LED
38
D08
16
A31
37
A35
AI1
+
19
A34
36
A22
5VDC
35
A32
34
A25
33
A21
Yellow /Wht (52)
A12
31
32
D09
17
A24
A14
Yellow (51)
AI6
+
AI2
+
30
42
43
GROUND
27
24VAC Com
AI5
+
26
Dehumidistat Wiring
24VAC
25
(NOT USED)
20
5VDC
AI3
+
24
8
D03
DI10
6
D02
Low Voltage Terminal
Board
C
G
Y1
LC2
Y2
L
X1
X2
R
SS
AIC
RS
SC
TO
5
4
49
50
O/B
LC1
7
J9
DI 3/4/5/6/ Com
51
DI6
DI5
52
DI4
53
DI3
54
DI2
55
9VDC
56
DI1
3
D01
1
J7
Dehumidistat
80
2
ARBOR SERIES SPECIFICATION CATALOG
Engineering Guide Specifications
Option: An internally mounted low pressure drop (high Cv)
water solenoid valve shall be factory installed for use in variable
speed pumping applications.
General
Furnish and install water source heat pumps as indicated on
the plans. Equipment shall be completely assembled, piped and
internally wired. Capacities and characteristics as listed in the
schedule and the specifications that follow. The reverse cycle
heating/cooling units shall be either suspended type with horizontal
air inlet and discharge or floor mounted type with horizontal air
inlet and vertical upflow air discharge. Units shall be AHRI/ISO
13256-1 certified and listed by a nationally recognized safetytesting laboratory or agency, such as ETL Testing Laboratory. Each
unit shall be computer run-tested at the factory with conditioned
water and operation verified to catalog data. Each unit shall be
mounted on a pallet and shipped in a corrugated box or stretchwrapped. The units shall be designed to operate with entering liquid
temperature between 20°F and 120°F [-6.7°C and 48.9°C].
Option: An internally mounted automatic flow regulator shall be
set to 3 gpm/ton to deliver optimal flow to the unit.
Refrigerant Circuit
All units shall utilize the non-ozone depleting and low global
warming potential refrigerant R-410A. All units shall contain a
sealed refrigerant circuit including a hermetic motor-compressor,
bidirectional thermostatic expansion valve, finned tube air-torefrigerant heat exchanger, reversing valve, coaxial tube water-torefrigerant heat exchanger, optional hot water generator coil, and
service ports.
Compressors shall be high-efficiency single speed rotary or scroll
type designed for heat pump duty and mounted on vibration
isolators. The compressor shall be double isolation mounted using
selected durometer grommets to provide vibration free compressor
mounting. Compressor motors shall be single-phase PSC with
overload protection.
Casing and Cabinet
The cabinet shall be fabricated from heavy-gauge galvanized steel
and finished with optional corrosion-resistant powder coating. This
corrosion protection system shall meet the stringent 1000 hour
salt spray test per ASTM B117. The interior shall be insulated with
1/2 in. thick, multi-density, cleanable aluminum foil coated glass
fiber with edges sealed or tucked under flanges to prevent the
introduction of glass fibers into the discharge air. Standard cabinet
panel insulation must meet NFPA 90A requirements, air erosion and
mold growth limits of UL-181, stringent fungal resistance test per
ASTM-C1071 and ASTM G21, and shall meet zero level bacteria
growth per ASTM G22. Unit insulation must meet these stringent
requirements or unit(s) will not be accepted.
The air coil shall be sized for low-face velocity and constructed of
lanced aluminum fins bonded to rifled aluminum tubes in a staggered
pattern not less than three rows deep for enhanced performance.
Option: AlumiSeal electro-coated air coil
The coaxial water-to-refrigerant heat exchanger shall be designed
for low water pressure drop and constructed of a convoluted copper
(cupronickel option) inner tube and a steel outer tube. Refrigerant
to air heat exchangers shall utilize enhanced corrugated lanced
aluminum fins and rifled copper tube construction rated to withstand
600 psig (4135 kPa) refrigerant working pressure. Refrigerant to
water heat exchangers shall be of copper inner water tube and
steel refrigerant outer tube design, rated to withstand 600 psig
(4135 kPa) working refrigerant pressure and 450 psig (3101 kPa)
working water pressure. The thermostatic expansion valve shall
provide proper superheat over the entire liquid temperature range
with minimal “hunting.” The valve shall operate bidirectionally
without the use of check valves.
One (horizontal) to two (vertical) blower and two compressor
compartment access panels shall be ‘lift-out’ removable with supply
and return ductwork in place.
A duct collar shall be provided on the supply air opening. Standard
size 1 in. [2.54 cm] MERV 4 filters shall be provided with each
unit. Units shall have a return air filter rack that is field convertible
from 1 in. [2.54 cm] to 2 in. [5.1 cm]. The upflow vertical units shall
have a removable insulated divider panel between the air handling
section and the compressor section to minimize the transmission of
compressor noise and to permit operational service testing without
air bypass. Vertical units shall be supplied with left or right horizontal
air inlet and top vertical air discharge. Horizontal units shall be
supplied with left or right air inlet and side or end air discharge.
Option: Cupronickel refrigerant to water heat exchanger shall
be of copper-nickel inner water tube and steel refrigerant outer
tube design, rated to withstand 600 psig (4135 kPa) working
refrigerant pressure and 450 psig (3101 kPa) working water
pressure. Water lines shall also be of cupronickel construction.
The compressor shall be double isolation mounted using selected
durometer grommets to provide vibration free compressor mounting.
The compressor mounting bracket shall be acoustically deadened
galvanized steel to prevent vibration transmission to the cabinet.
Option: Hot water generator - Internal double wall vented hot
water generator coil refrigerant to water heat exchangers shall be
of copper inner water tube and steel refrigerant outer tube design,
rated to withstand 600 psig (4135 kPa) working refrigerant pressure
and 450 psig (3101 kPa) working water pressure.
Option: AlpinePure MERV 13 Filter - A 2 in. thick [51 mm] MERV
13 filter can help fulfill a credit under the LEED Rating System. Its
low initial resistance promotes low energy consumption (0.21 in.
w.g. @ 300 fpm) and provides nearly twice the life of a standard
filter (300 fpm vs. standard 500 fpm application).
Option: ThermaShield coated water-to-refrigerant heat exchanger,
water lines and refrigerant suction lines shall be insulated to
prevent condensation at low liquid temperatures below 50°F.
Option: A Super Quiet Sound package shall include multi-density
full coverage compressor blanket.
81
ARBOR SERIES SPECIFICATION CATALOG
Engineering Guide Specifications cont.
Option: AlpinePure hot gas bypass
The hot gas bypass (HGB) option is designed to limit the minimum
evaporating pressure in the cooling mode to prevent the air coil from
icing. The option shall consist of a hot gas bypass valve installed
in the discharge side of the compressor. The refrigerant control
shall proportionately bypass hot gas refrigerant to the air coil when
suction pressure falls below 115 psig thus limiting air coil freeze-up.
Space humidity high and low alarm limits (building
automation system only) - The control has a high and low
alarm limit that can be enumerated over a building automation
system. The factory default set point for these alarm limits is
0% for the low alarm and 100% for the high alarm limit. These
limits can be adjusted through a building automation system.
Blower Motor and Assembly
Optional AlpinePure hot gas reheat
An optional hot gas reheat coil shall be available to allow
dehumidification-only operation. The internal reheat system shall
be factory installed and include a high efficiency reheat coil located
downstream of the evaporator coil, a reclaim valve and integral
controls to allow heating, cooling and reheat/dehumidification modes.
The reheat coil shall be sized so that during reheat/dehumidification
mode the unit will produce neutral air (78 ±3°F DB @ 50-58% relative
humidity) with typical 80 DB/67 WB °F entering air and 90°F entering
water temperature. The reheat coil shall be sized to restrict airflow by
no more than 0.17 in wg at 350 feet per minute airflow velocity.
The blower shall be a direct drive centrifugal type with a dynamically
balanced wheel. The housing and wheel shall be designed for quiet
low outlet velocity operation. The blower housing shall be removable
from the unit without disconnecting the supply air ductwork for
servicing of the blower motor. The blower motor shall be isolated
from the housing by rubber grommets. The motor shall be
permanently lubricated and have thermostatic overload protection.
Option: PSC blower motor shall be a three-speed PSC type.
Option: 5-Speed ECM blower motor shall be a 5-speed ECM
type. The 5-speed ECM blower motor shall be soft starting, shall
maintain constant torque over its operating static range, and shall
provide 5 speed settings. The blower motor shall be isolated from
the housing by rubber grommets. The motor shall be permanently
lubricated and have thermostatic overload protection. 5-speed ECM
motors shall be long-life ball bearing type.
Three control options are available:
Room wall dehumidistat – An optional room wall
dehumidistat shall control the reheat mode thru a 24VAC ‘Hum’
input (On or Off). Setpoint and deadband shall be determined
by the dehumidistat.
Duct humidity sensor (FX10 only) – An optional duct
humidity sensor shall be installed. The FX10 control reads
the humidity from the sensor and determines operation mode.
Setpoint and deadband are internally set by the FX10 control
and shall be are adjustable. Continuous blower operation is
a requirement for this mode to accurately measure relative
humidity during the off cycle.
Option: Variable speed ECM blower motor shall be a variable
speed ECM type. The variable speed ECM blower motor shall be
soft starting, shall maintain constant cfm over its operating static
range, and shall provide 12 cfm settings. Variable speed ECM
motors shall be long-life ball bearing type.
Option: High static blower motors shall be available on certain
PSC and ECM models.
Room wall humidity sensor (FX10 only) - An optional wall
humidity sensor is installed. The FX10 control reads the
humidity from the sensor and determines operation mode.
Setpoint and dead band are internally set by the FX10 control
and are adjustable. Continuous blower operation is NOT
requirement for this mode.
Electrical
A control box shall be located within the unit compressor
compartment and shall contain a 75VA transformer, 24 volt
activated, 2 pole compressor contactor, terminal block for
thermostat wiring and solid-state controller for complete unit
operation. Electromechanical operation WILL NOT be accepted.
Units shall be name-plated for use with time delay fuses or HACR
circuit breakers. Unit controls shall be 24 volt and provide heating
or cooling as required by the remote thermostat/sensor.
Dehumidification set point (used only with a humidity
sensor) - The factory default set point for dehumidification is
52% this is field adjustable from 30% to 60%. In addition there
shall be a factory default differential of 5% field adjustable from
5% to 15%. The control will enable re-heat when the space
humidity rises above the set point plus the differential.
An Aurora microprocessor-based controller that interfaces with
a multi-stage electronic thermostat to monitor and control unit
operation shall be provided. The control shall provide operational
sequencing, blower speed control, high and low pressure switch
monitoring, freeze detection, condensate overflow sensing, lockout
mode control, LED status and fault indicators, fault memory, field
selectable options and accessory output. The control shall provide
fault retry three times before locking out to limit nuisance trips.
Reheat operation during periods of vacancy - The control
logic contains an unoccupied set point that can be used for
periods the unoccupied mode if desired. The factory default for
the set point is 60% and is adjustable from 30% to 60%. The
unoccupied setback must be enabled either through a building
automation system or with a user interface. Factory default for
unoccupied setback is off.
A detachable terminal block with screw terminals will be provided
for field control wiring. All units shall have knockouts for entrance of
low and line voltage wiring. The blower motor and control box shall
be harness plug wired for easy removal.
82
ARBOR SERIES SPECIFICATION CATALOG
Engineering Guide Specifications cont.
Option: A FX10 microprocessor-based controller that interfaces
with a multi-stage electronic thermostat to monitor and control unit
operation. The control shall provide operational sequencing, blower
speed control, high, low and loss of charge pressure monitoring,
freeze detection, condensate overflow sensing, lockout mode
control, hot water and loop pump control, LED status and fault
indicators, fault memory, field selectable options and accessory
output. The control shall communicate all mode, status, fault
and lockout codes to the front end system for fast and accurate
equipment diagnosis. The control shall provide fault retry three
times before locking out to limit nuisance trips.
Specifications:
• Temperature range of 35°F [2°C] to 180°F [82°C].
• Max. working pressure of 400 psi [2757 kPa] for 1/2 in. and 3/4
in. hose kits; max. working pressure of 350 psi [kPa] for 1 in. and
1-1/4 in. hose kits.
Hose Kits – Automatic Balancing and Ball Valves
(field-installed)
A flexible steel braid hose featuring Kevlar® reinforced EPDM
core with ANSI 302/304 stainless steel outer braid and fire rated
materials per ASTM E 84-00 (NFPA 255, ANSI/UL 723 & UBC 8-1).
Ball valve at one end; swivel connector with adapter at the other
end (swivel to adapter connection via fiber or EPDM gasket). Swivel
connection provides union between heat pump and piping system.
The hoses feature brass fittings, stainless steel ferrules. A full port
ball valve shall be provided with integral P/T (pressure/temperature)
port on supply hose and automatic balancing valve with integral P/T
ports and full port ball valve on return hose.
Optional FX10 microprocessor control communication
protocols: N2, LonWorks, BACnet
Optional GeoStart® (compressor soft starter) shall be factory
installed for use in applications that require low starting amps,
reduced compressor startup noise, off-grid, and improved startup
behavior. GeoStart shall reduce normal starting current by 60% on
208-230/60/1 units.
Specifications:
• Temperature range of 35°F [2°C] to 180°F [82°C]
• Max. working pressure of 400 psi [2757 kPa] for 1/2 in.
and 3/4 in. hose kits; max. working pressure of 350 psi
[2413 kPa] for 1 in. and 1-1/4 in. hose kits
• Minimum burst pressure of four times working pressure
Piping
Supply and return water connections shall be FPT copper
fittings fixed to the corner post, which eliminate the need for backup
pipe wrenches.
With vertical units, the condensate connection shall be a 3/4 in.
[19.1 mm] PVC socket with internally-trapped hose that can be
routed to front or side corner post locations.
Hose Kits – Automatic Balancing and Ball Valves with ‘Y’
strainer (field-installed)
A flexible steel braid hose featuring Kevlar® reinforced EPDM
core with ANSI 302/304 stainless steel outer braid and fire rated
materials per ASTM E 84-00 (NFPA 255, ANSI/UL 723 & UBC
8-1). Ball valve at one end; swivel connector with adapter at the
other end (swivel to adapter connection via fiber or EPDM gasket).
Swivel connection provides union between heat pump and piping
system. The hoses feature brass fittings, stainless steel ferrules.
A “y” strainer is provided on one end for fluid straining and integral
“blowdown” valve. A full port ball valve shall be provided with
integral P/T (pressure/temperature) port on supply hose and
automatic balancing valve with integral P/T ports and full port ball
valve on return hose.
Hanger Kit
(included with horizontal units only - field installed)
The hanger kit shall consist of galvanized steel brackets, bolts, lock
washers, and isolators and shall be designed to fasten to the unit
bottom panel for suspension from 3/8 in. threaded rods. Unit sizes
009-070 shall include four brackets. Brackets shall not inhibit filter
removal in any way.
Accessories
Thermostat (field-installed)
A multi-stage auto-changeover electronic digital thermostat shall
be provided. The thermostat shall offer two heating stages and
one cooling stage with precise temperature control. An OFF-HEATAUTO-COOL-EMERG system switch, OFF-AUTO blower switch,
and indicating LEDs shall be provided. The thermostat shall display
in °F or °C.
Specifications:
• Temperature range of 35°F [2°C] to 180°F [82°C]
• Max. working pressure of 400 psi [2756 kPa] for 1/2 in.
and 3/4 in. hose kits; max. working pressure of 350 psi
[2413 kPa] for 1 in. and 1-1/4 in. hose kits
• Minimum burst pressure of four times working pressure
Hose Kits – Ball Valves (field-installed)
Hot Water Pump Kit
A flexible steel braid hose featuring Kevlar® reinforced EPDM
core with ANSI 302/304 stainless steel outer braid and fire rated
materials per ASTM E 84-00 (NFPA 255, ANSI/UL 723 & UBC 8-1).
Ball valve at one end; swivel connector with adapter at the other
end (swivel to adapter connection via fiber or EPDM gasket). Swivel
connection provides union between heat pump and piping system.
The hoses feature brass fittings, stainless steel ferrules. A full port
ball valve shall be provided with integral P/T (pressure/temperature)
port on supply hose.
An accessory pump kit is available for hot water generation option.
This kit includes hot water pump, fittings, and water heater kit
necessary for potable water application. Order DPK5 for use with
Aurora and FX10 controls.
83
ARBOR SERIES SPECIFICATION CATALOG
Revision Guide
Pages:
Date:
By:
Updated with Aluminum Coils
29 Oct 2013
DS
35-36
Updated 009-012 Horizontal Dimensions
29 Oct 2013
DS
39-41
Updated Compressor LRA with GeoStart
31 Jul 2013
DS
All
Updated Nomenclature to Reflect New Variable Speed ECM Motor
13 Feb 2012
DS
All
Updated Nomenclature to Reflect New 5-Speed ECM Motor
13 Feb 2012
DS
All
Updated Nomenclature to Reflect New Aurora Controls
13 Feb 2012
DS
84
Added Revision Guide
13 Feb 2012
DS
All
Description:
84
Product:
Type:
Size:
Arbor Series
Geothermal/Water Source Heat Pumps
0.75-6 Ton
Document Type:
Part Number:
Release Date:
Specification Catalog
SC1200AZA
10/13
©2013 The manufacturer has a policy of continual product research and development and reserves the right to change design and specifications without notice.
Download PDF