Model No. KX-TG5511CX KX-TG6511CX KX-TG6512CX

TG5511-6511-6512CX(e-e).book Page 1 Friday, April 9, 2010 4:32 PM
Operating Instructions
Digital Cordless Phone
Model No.
KX-TG5511CX
KX-TG6511CX
KX-TG6512CX
Model shown is KX-TG5511. Model shown is KX-TG6511.
Before initial use, see “Getting
Started” on page 8.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save
them for future reference.
This unit is compatible with Caller ID. You must subscribe to the appropriate
service offered by your service provider/telephone company.
TG5511-6511-6512CX(e-e).book Page 2 Friday, April 9, 2010 4:32 PM
Table of Contents
Introduction
Model composition . . . . . . . . . . . . . . . 3
Accessory information . . . . . . . . . . . . . 3
Error messages . . . . . . . . . . . . . . . . 34
Troubleshooting . . . . . . . . . . . . . . . . 35
Wall mounting. . . . . . . . . . . . . . . . . . 39
Important Information
Index
For your safety . . . . . . . . . . . . . . . . . . 5
Important safety instructions . . . . . . . . 6
For best performance . . . . . . . . . . . . . 6
Other information. . . . . . . . . . . . . . . . . 7
Specifications . . . . . . . . . . . . . . . . . . . 7
Getting Started
Setting up . . . . . . . . . . . . . . . . . . . . . . 8
Note when setting up. . . . . . . . . . . . . . 9
Controls . . . . . . . . . . . . . . . . . . . . . . . 10
Display. . . . . . . . . . . . . . . . . . . . . . . . 12
Turning the power on/off . . . . . . . . . . 13
Initial settings. . . . . . . . . . . . . . . . . . . 13
One touch eco mode . . . . . . . . . . . . . 14
Making/Answering Calls
Making calls. . . . . . . . . . . . . . . . . . . . 15
Answering calls . . . . . . . . . . . . . . . . . 15
Useful features during a call . . . . . . . 16
Key lock. . . . . . . . . . . . . . . . . . . . . . . 17
Phonebook
Handset phonebook . . . . . . . . . . . . . 18
Copying phonebook entries. . . . . . . . 19
Programming
Programmable settings . . . . . . . . . . . 20
Special programming . . . . . . . . . . . . 25
Registering a unit . . . . . . . . . . . . . . . 26
Caller ID Service
Using Caller ID service . . . . . . . . . . . 28
Caller list . . . . . . . . . . . . . . . . . . . . . . 28
Voice Mail Service
Voice mail service . . . . . . . . . . . . . . . 30
Intercom/Locator
Intercom . . . . . . . . . . . . . . . . . . . . . . 31
Handset locator . . . . . . . . . . . . . . . . . 31
Transferring calls, conference calls . . 31
Useful Information
Character entry . . . . . . . . . . . . . . . . . 32
2
Index. . . . . . . . . . . . . . . . . . . . . . . . . 40
TG5511-6511-6512CX(e-e).book Page 3 Friday, April 9, 2010 4:32 PM
Introduction
Model composition
Base unit
Handset
Part No.
Part No.
KX-TG5511
series
*1
KX-TG5511
KX-TG5511
KX-TGA550
1
KX-TG6511
series
KX-TG6511*1
KX-TG6511
KX-TGA650
1
KX-TG6512
KX-TG6511
KX-TGA650
2
Series
Model No.
Quantity
*1 Feature differences: Intercom calls can be made between the handsets by
purchasing and registering one or more optional handsets (page 4).
L The suffix (CX) in the following model numbers will be omitted in these
instructions: KX-TG5511CX/KX-TG6511CX/KX-TG6512CX
Accessory information
Supplied accessories
Quantity
No.
Accessory item/Part number
1
2
KX-TG5511
KX-TG6511
KX-TG6512
AC adaptor/PQLV219BX
1
2
Telephone line cord
1
1
3
Rechargeable batteries*1/
HHR-55AAAB or N4DHYYY00001
2
4
4
Handset cover*2
1
2
5
Charger
—
1
*1 See page 4 for replacement battery information.
*2 The handset cover comes attached to the handset.
1
2
3
4
5
3
TG5511-6511-6512CX(e-e).book Page 4 Friday, April 9, 2010 4:32 PM
Introduction
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information.
Accessory item
Model number
Rechargeable
batteries
HHR-4DPA or HHR-4MRT*1
DECT repeater
KX-A272
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
*1 Replacement batteries may have a different capacity from that of the supplied
batteries.
Expanding your phone system
You can expand your phone system by registering optional handsets (6 max.) to a
single base unit.
L Optional handsets may be a different colour from that of the supplied handsets.
■ KX-TG5511
■ KX-TG6511/KX-TG6512
Handset (optional): KX-TGA551CX
Handset (optional): KX-TGA651CX
4
TG5511-6511-6512CX(e-e).book Page 5 Friday, April 9, 2010 4:32 PM
Important Information
For your safety
To prevent severe injury and loss of
life/property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
L Use only the power source marked on the
product.
L Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
L Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
L Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from the
power outlet, then wiping with a dry cloth.
Accumulated dust may cause an insulation
defect from moisture, etc. resulting in a fire.
L Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact an
authorised service centre.
L Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
L Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
L To prevent the risk of fire or electrical shock,
do not expose the product to rain or any
type of moisture.
L Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
L Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
Operating safeguards
L Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
L Do not disassemble the product.
L Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
L Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of 1.88
GHz to 1.90 GHz, and the RF transmission
power is 250 mW (max.).)
L Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
L Never install telephone wiring during an
electrical storm.
L Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
L Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
L Use caution when installing or modifying
telephone lines.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
L This product is unable to make calls when:
– the handset batteries need recharging or
have failed.
– there is a power failure.
– the key lock feature is turned on.
5
TG5511-6511-6512CX(e-e).book Page 6 Friday, April 9, 2010 4:32 PM
Important Information
Battery
L We recommend using the batteries noted
on page 4. USE ONLY rechargeable NiMH batteries AAA (R03) size.
L Do not mix old and new batteries.
L Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
L Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
L Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
L Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Important safety
instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
6
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
L For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
L Coverage and voice quality depends on the
local environmental conditions.
L If the reception for a base unit location is not
satisfactory, move the base unit to another
location for better reception.
Environment
L Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
L The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
L The product should not be exposed to direct
sunlight.
L Do not place heavy objects on top of the
product.
L When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
L The product should be kept away from heat
sources such as radiators, cookers, etc. It
should not be placed in rooms where the
temperature is less than 0 °C or greater
than 40 °C. Damp basements should also
be avoided.
L The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
TG5511-6511-6512CX(e-e).book Page 7 Friday, April 9, 2010 4:32 PM
Important Information
L Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
L Wipe the outer surface of the product
with a soft moist cloth.
L Do not use benzine, thinner, or any
abrasive powder.
Other information
Notice for product disposal, transfer, or
return
■ Power source:
100–240 V AC, 50/60 Hz
■ Power consumption:
Base unit:
Standby: Approx. 0.45 W
Maximum: Approx. 3.8 W
Charger:
Standby: Approx. 0.2 W
Maximum: Approx. 3.0 W
■ Operating conditions:
0 °C – 40 °C, 20 % – 80 % relative air
humidity (dry)
Note:
L Design and specifications are subject to
change without notice.
L The illustrations in these instructions may
vary slightly from the actual product.
L This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Information on Disposal in other Countries
outside the European Union
These symbols are only valid in the European
Union. If you wish to discard these items,
please contact your local authorities or dealer
and ask for the correct method of disposal.
Specifications
■ Standard:
DECT (Digital Enhanced
Cordless Telecommunications),
GAP (Generic Access Profile)
■ Frequency range:
1.88 GHz to 1.90 GHz
■ RF transmission power:
Approx. 10 mW (average power per
channel)
7
TG5511-6511-6512CX(e-e).book Page 8 Friday, April 9, 2010 4:32 PM
Getting Started
■ Base unit (KX-TG6511/KX-TG6512)
Setting up
Press plug firmly.
“Click”
Connections
L Use only the supplied Panasonic AC
adaptor PQLV219BX.
Hook
(100-240 V AC,
50/60 Hz)
■ Base unit (KX-TG5511)
Press plug firmly.
Use only the supplied
telephone line cord.
Hook
To telephone
line
DSL/ADSL filter*
“Click”
Use only the supplied
telephone line cord.
To telephone
line
DSL/ADSL filter*
Correct
Wrong
*DSL/ADSL filter (not supplied) is
required if you have DSL/ADSL service.
8
Wrong
“Click”
(100-240 V AC,
50/60 Hz)
Correct
“Click”
*DSL/ADSL filter (not supplied) is
required if you have DSL/ADSL service.
■ Charger
Hooks
(100-240 V AC,
50/60 Hz)
TG5511-6511-6512CX(e-e).book Page 9 Friday, April 9, 2010 4:32 PM
Getting Started
Battery installation
L USE ONLY Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/NiCd batteries.
L Confirm correct polarities (S, T).
Rechargeable Ni-MH ONLY
Note when setting up
Note for connections
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floormounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a Tadaptor.
Note for battery installation
L When the language selection is
displayed, see page 13.
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged,
the charge indicator goes off and
“Fully charged” is displayed.
Confirm “Charging” is displayed.
Charge indicator
L Use the supplied rechargeable
batteries. For replacement, we
recommend using the Panasonic
rechargeable batteries noted on page
4, 6.
L Wipe the battery ends (S, T) with a
dry cloth.
L Avoid touching the battery ends
(S, T) or the unit contacts.
Note for battery charge
L It is normal for the handset to feel
warm during charging.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
9
TG5511-6511-6512CX(e-e).book Page 10 Friday, April 9, 2010 4:32 PM
Getting Started
Battery level
Icon
Battery level
&
High
(
Medium
)
Low
0)4
Controls
Handset
■ KX-TG5511
A
Needs charging.
Panasonic Ni-MH battery
performance (supplied batteries)
Operation
Operating time
In continuous
use
18 hours max.
Not in use
(standby)
170 hours max.
Note:
L It is normal for batteries not to reach
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L Actual battery performance depends
on usage and ambient environment.
L Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
L The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
10
F
G
B
C
D
H
I
E
J
K
A
B
A Charge indicator
Ringer indicator
B Speaker
C {C} (Talk)
D {s} (Speakerphone)
E Dial keypad
F Receiver
G Display
H {ic} (Off/Power)
I {ECO/R}
ECO: Eco mode shortcut key
R: Recall/Flash
TG5511-6511-6512CX(e-e).book Page 11 Friday, April 9, 2010 4:32 PM
Getting Started
J Microphone
K Charge contacts
■ Control type
A Soft keys
The handset features 3 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
B Navigator key
– {^}, {V}, {<}, or {>}: Scroll through
various lists and items.
– {^} or {V}: Adjust the receiver or
speaker volume while talking.
– {<} (y: Caller list): View the caller
list.
– {>} (R: Redial): View the redial
list.
■ KX-TG6511/KX-TG6512
A
G
H
B C
D
E
I
J
F
A Charge indicator
Ringer indicator
B Secure grip
L Secure grip offers support when
you cradle the handset between
your shoulder and ear.
C Speaker
D {C} (Talk)
E {s} (Speakerphone)
F Dial keypad
G Receiver
H Display
I {ic} (Off/Power)
J {ECO/R}
ECO: Eco mode shortcut key
R: Recall/Flash
K Microphone
L Charge contacts
■ Control type
A Soft keys
The handset features 3 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
B Navigator key
– {^}, {V}, {<}, or {>}: Scroll through
various lists and items.
– ? (Volume: {^} or {V}): Adjust the
receiver or speaker volume while
talking.
– {<} (y: Caller list): View the caller
list.
– {>} (R: Redial): View the redial
list.
K
L
A
B
11
TG5511-6511-6512CX(e-e).book Page 12 Friday, April 9, 2010 4:32 PM
Getting Started
Item
Base unit
s
■ KX-TG5511
A
B
A Charge contacts
B {x} (Locator)
B
A Charge contacts
B {x} (Locator)
Speakerphone is on.
(page 15)
C
The line is in use.
L When flashing slowly:
The call is put on hold.
L When flashing rapidly:
An incoming call is
now being received.
y
Missed call*1 (page 28)
i
The base unit
transmission power is
set to “Low”. (page 14)
k
The LCD and key
backlight is off. (page
22)
&
Battery level
■ KX-TG6511/KX-TG6512
A
Meaning
E
Alarm is on. (page 25)
:
Privacy mode is on.
(page 23)
~
Ringer volume is off.
(page 23)
6
New voice mail
message received.*2
(page 30)
Line
in use
Someone is using the
line.
*1 Caller ID subscribers only
*2 Voice mail subscribers only
Soft key icons
Display
Icon
Action
^
Returns to the previous
screen or outside call.
Meaning
8
Displays the menu.
w
Within base unit range
M
_
Out of base unit range
Accepts the current
selection.
x
Paging, intercom mode.
j
Displays a previously
dialled phone number.
Handset display items
Item
12
TG5511-6511-6512CX(e-e).book Page 13 Friday, April 9, 2010 4:32 PM
Getting Started
Icon
Action
Power off
]
Makes a call. (page 15)
Press {ic} for about 2 seconds.
L
Temporarily turns off the
ringer for incoming calls.
(page 16)
/
Sets 24-hour or 12-hour
clock format. (page 14)
H
Places a call on hold. (page
31)
n
Opens the phonebook.
~
Allows you to edit phone
numbers. (page 29)
m
Adds new entry. (page 18)
k
Displays the character
entry mode for phonebook
search. (page 18)
&
Turns the key lock feature
off. (page 17)
/
Selects a character entry
mode.
I
Stores phone numbers.
(page 29)
l
Inserts a dialling pause.
Dialling mode
W
Erases the selected item or
returns to the outside call.
4
Allows you to make an
intercom call. (page 31)
w
Establishes a conference
call. (page 31)
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
^
Erases a number/character.
1
Puts the call on mute.
Turning the power
on/off
Power on
Press {ic} for about 1 second.
Initial settings
Symbol meaning:
Example: {V}/{^}: “Off”
Press {V} or {^} to select the words
in quotations.
Display language
Important:
L When the language selection is
displayed after installing the
batteries for the first time, perform
step 2.
1
2
1
2
8 i {#}{1}{1}{0}
{V}/{^}: Select your desired
language. i M i {ic}
8 i {#}{1}{2}{0}
{V}/{^}: Select the desired setting.
i M i {ic}
Date and time
1 8 i {#}{1}{0}{1}
2 Enter the current date, month, and
year. i M
Example: 15 July, 2010
{1}{5} {0}{7} {1}{0}
3
Enter the current hour and minute.
13
TG5511-6511-6512CX(e-e).book Page 14 Friday, April 9, 2010 4:32 PM
Getting Started
Example: 9:30
{0}{9} {3}{0}
L You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing /.
4
M i {ic}
Note:
L To correct a digit, press {<} or {>} to
move the cursor to the digit, then
make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
One touch eco mode
The {ECO/R} button on the handset
enables you to activate the eco function
with one touch.
By activating eco mode, your unit can
reduce the base unit transmission power
by up to 90% in standby mode.
You can turn on/off one touch eco mode
by just pressing {ECO/R}. The default
setting is “Normal”.
– When the one touch eco mode is on:
“Low” is temporarily displayed and
i is shown on the handset display
instead of w.
– When the one touch eco mode is off:
“Normal” is temporarily displayed
and i goes off from the handset
display.
Note:
L When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be
reduced.
L Activating one touch eco mode
reduces the range of the base unit in
standby mode.
L If you set the repeater mode to “On”
(page 27):
14
– One touch eco mode is cancelled.
– “Eco Setup” is not shown in the
display menu (page 21).
TG5511-6511-6512CX(e-e).book Page 15 Friday, April 9, 2010 4:32 PM
Making/Answering Calls
3
Making calls
1
Lift the handset and dial the phone
number.
L To correct a digit, press ^.
2
3
Press {C} or ].
When you finish talking, press
{ic} or place the handset on the
base unit or charger.
Using the speakerphone
1
2
Dial the phone number and press
{s}.
L Speak alternately with the other
party.
When you finish talking, press
{ic}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list (each 24 digits
max.).
1
2
j or {>} (R)
3
{C}
{V}/{^}: Select the desired phone
number.
Erasing a number in the redial list
1
2
{V}/{^}: “Yes” i M i {ic}
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 19).
Example: If you need to dial the line
access number “0” when making outside
calls with a PBX:
1
2
{0} i l
Dial the phone number. i {C}
Note:
L A 3 second pause is inserted each
time l is pressed. Repeat as
needed to create longer pauses.
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
1
Lift the handset and press {C} or
{s} when the unit rings.
L You can also answer the call by
pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key
answer feature)
2
When you finish talking, press
{ic} or place the handset on the
base unit or charger.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You
do not need to press {C}. To turn this
feature on, see page 22.
j or {>} (R)
{V}/{^}: Select the desired phone
number. i W
15
TG5511-6511-6512CX(e-e).book Page 16 Friday, April 9, 2010 4:32 PM
Making/Answering Calls
Adjusting the handset ringer volume
Press {^} or {V} repeatedly to select the
desired volume while the handset is
ringing for an incoming call.
Note:
L You can also program the handset
ringer volume beforehand (page 22).
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing L.
Useful features during
a call
Hold
This feature allows you to put an outside
call on hold.
1
2
3
Press 8 during an outside call.
{V}/{^}: “Hold” i M
To release hold, press {C}.
L Another handset user can take
the call by pressing {C}.
Note:
L If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound
and the ringer indicator flashes
rapidly. After 1 additional minute on
hold, the call is disconnected.
L If another phone is connected to the
same line (page 9), you can also take
the call by lifting its handset.
Mute
While mute is turned on, you can hear
the other party, but the other party
cannot hear you.
1
16
Press 1 during conversation.
L 1 flashes.
2
To return to the conversation, press
1 again.
Recall/flash
{ECO/R} allows you to use the special
features of your host PBX such as
transferring an extension call, or
accessing optional telephone services.
Note:
L To change the recall/flash time, see
page 23.
For call waiting or Call Waiting
Caller ID service users
To use call waiting, you must first
subscribe to call waiting from your
service provider/telephone company.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a call waiting tone.
If you subscribe to both Caller ID and
Call Waiting with Caller ID services,
the 2nd caller’s information is displayed
after you hear the call waiting tone on the
handset.
1
Press {ECO/R} to answer the 2nd
call.
2
To switch between calls, press
{ECO/R}.
Note:
L Please contact your service
provider/telephone company for
details and availability of this service
in your area.
Temporary tone dialling (for
rotary/pulse service users)
You can temporarily switch the dialling
mode to tone when you need to access
touch-tone services (for example,
telephone banking services).
1
Make a call.
TG5511-6511-6512CX(e-e).book Page 17 Friday, April 9, 2010 4:32 PM
Making/Answering Calls
2
Press {*} when prompted to enter
your code or PIN, then press the
appropriate dial keys.
Note:
L The dialling mode will return to pulse
when you hang up.
Call share
You can join an existing outside call.
To join the conversation, press {C}
when the other handset is on an outside
call.
Note:
L To prevent other users from joining
your conversations with outside
callers, turn the privacy mode on
(page 23).
Key lock
The handset can be locked so that no
calls or settings can be made. Incoming
calls can be answered, but all other
functions are disabled while key lock is
on.
To turn key lock on, press 8 for about
3 seconds.
L & is displayed.
L To turn key lock off, press & for
about 3 seconds.
Note:
L Calls to emergency numbers cannot
be made until key lock is turned off.
17
TG5511-6511-6512CX(e-e).book Page 18 Friday, April 9, 2010 4:32 PM
Phonebook
L Press the same dial key
repeatedly to display the first
entry corresponding to each
character located on that dial key.
L If there is no entry corresponding
to the character you selected, the
next entry is displayed.
Handset phonebook
The phonebook allows you to make calls
without having to dial manually. You can
add 100 names and phone numbers.
Adding entries
1 nim
2 Enter the party’s name (16
characters max.). i M
L You can change the character
entry mode by pressing /
(page 32).
3
4
Enter the party’s phone number (24
digits max.). i M 2 times
L To add other entries, repeat from
step 2.
3
{V}/{^}: Scroll through the
phonebook if necessary.
4
{C}
Editing entries
1 Find the desired entry (page 18).
i8
2
3
{V}/{^}: “Edit” i M
4
Edit the phone number if necessary
(24 digits max.). i M 2 times
i {ic}
{ic}
Edit the name if necessary (16
characters max.; page 32). i M
Finding and calling a
phonebook entry
Erasing entries
Scrolling through all entries
Erasing an entry
1
2
n
1
2
3
{C}
{V}/{^}: Select the desired entry.
L You can scroll through the
phonebook entry by pressing and
holding {V} or {^}.
Searching by first character
1
2
18
n
L Change the character entry mode
if necessary:
k i {V}/{^}: Select the
character entry mode. i M
Press the dial key ({0} to {9}, or {#})
which contains the character you
are searching for (page 32).
Find the desired entry (page 18).
W i {V}/{^}: “Yes” i M
i {ic}
Erasing all entries
1
2
3
4
ni8
{V}/{^}: “Erase All” i M
{V}/{^}: “Yes” i M
{V}/{^}: “Yes” i M i {ic}
Chain dial
This feature allows you to dial phone
numbers in the phonebook while you are
on a call. This feature can be used, for
example, to dial a calling card access
number or bank account PIN that you
TG5511-6511-6512CX(e-e).book Page 19 Friday, April 9, 2010 4:32 PM
Phonebook
have stored in the phonebook, without
having to dial manually.
1
2
3
4
During an outside call, press 8.
{V}/{^}: “Phonebook” i M
{V}/{^}: Select the desired entry.
Press ] to dial the number.
Note:
L When storing a calling card access
number and your PIN in the
phonebook as one phonebook entry,
press l to add pauses after the
number and PIN as necessary (page
15).
L If you have rotary/pulse service, you
need to press {*} before pressing
8 in step 1 to change the dialling
mode temporarily to tone. When
adding entries to the phonebook, we
recommend adding {*} to the
beginning of phone numbers you wish
to chain dial (page 18).
i Find the desired entry. i
M
4
{ic}
Copying all entries
1
2
3
4
ni8
{V}/{^}: “Copy All” i M
{V}/{^}: Select the handset you
want to send the phonebook entry
to. i M
L When all entries have been
copied, “Completed” is
displayed.
{ic}
Copying phonebook
entries
You can copy phonebook entries
between 2 handsets.*1
*1 Panasonic compatible handset
Copying an entry
1
Find the desired entry (page 18).
i8
2
3
{V}/{^}: “Copy” i M
{V}/{^}: Select the handset you
want to send the phonebook entry
to. i M
L When an entry has been copied,
“Completed” is displayed.
L To continue copying another
entry: {V}/{^}: “Yes” i M
19
TG5511-6511-6512CX(e-e).book Page 20 Friday, April 9, 2010 4:32 PM
Programming
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 20)
– using the direct commands (page 22)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1 8
2 Press {V} or {^} to select the desired main menu. i M
3 Press {V} or {^} to select the desired item in sub-menu 1. i M
L In some cases, you may need to select from sub-menu 2. i M
4
Press {V} or {^} to select the desired setting. i M
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L See page 22 for the default settings.
Main menu
Sub-menu 1
–
Time Settings
e
Ringer Setup
d
20
Page
28
Set Date/Time*1
–
13
Alarm
–
25
Time Adjustment*1
–
–
Ringer Volume
(Handset)
–
–
Ringtone
Intercom
4
Sub-menu 2
–
Caller List
\
–
–
–
–
31
TG5511-6511-6512CX(e-e).book Page 21 Friday, April 9, 2010 4:32 PM
Programming
Main menu
Sub-menu 1
Sub-menu 2
Initial Setup
c
Ringer Setup
Ringer Volume
Time Settings
Page
–
Ringtone
–
Set Date/Time*1
13
Alarm
25
Time Adjustment*1
–
Handset Name
–
25
Eco Setup
Transmission
Power*1
14
Display Setup
LCD & Key
Backlight
–
–
Contrast
Keytones
–
–
Area Code*1
–
25
Auto Talk
–
15
Line Setup
Dial Mode*1
13
Recall/Flash*1
16
Privacy Mode*1
–
–
Base Unit PIN*1
–
26
–
27
Repeater Mode*1
Register
Register H.set
26
Language
Display
13
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
21
TG5511-6511-6512CX(e-e).book Page 22 Friday, April 9, 2010 4:32 PM
Programming
Programming using the direct commands
1 8 i {#}
2 Enter the desired code.
3 Select the desired setting. i M
L This step may vary depending on the feature being programmed.
L To exit the operation, press {ic}.
Note:
L In the following table, < > indicates the default settings.
System *1
Page
–
–
28
–
r
13
{1}: Once {2}: Daily
{0}: <Off>
–
25
{2}{2}{6}
{1}: Caller ID
{0}: <Manual>
r
–
Ringer Volume*3
(Handset)
{1}{6}{0}
{1}–{6}: Level 1–6 <6>
{0}: Off
–
–
Ringtone*4, *5
(Handset)
{1}{6}{1}
<Ringtone 1>
–
–
Feature
Code
Caller List
{2}{1}{3}
Set Date/Time
{1}{0}{1}
Alarm
{7}{2}{0}
Time
Adjustment*2
Setting
Intercom
{2}{7}{4}
–
–
31
Handset Name
{1}{0}{4}
–
–
25
Transmission
Power
{7}{2}{5}
{1}: <Normal>
{2}: Low
r
14
LCD & Key
Backlight
{2}{7}{6}
{1}: <On> {0}: Off
–
–
Contrast
(Display contrast)
{1}{4}{5}
{1}–{6}: Level 1–6 <3>
–
–
Keytones*6
{1}{6}{5}
{1}: <On> {0}: Off
Area Code
{2}{5}{5}
–
–
–
r
25
Auto Talk*7
{2}{0}{0}
{1}: On {0}: <Off>
–
15
Dial Mode
{1}{2}{0}
{1}: Pulse
{2}: <Tone>
r
13
22
TG5511-6511-6512CX(e-e).book Page 23 Friday, April 9, 2010 4:32 PM
Programming
Feature
Code
Setting
Recall/Flash*8
{1}{2}{1}
{0}: 900 msec.
{1}: 700 msec.
{2}: <600 msec.>
{3}: 400 msec.
{4}: 300 msec.
{5}: 250 msec.
{*}: 200 msec.
{#}: 160 msec.
{6}: 110 msec.
{7}: 100 msec.
{8}: 90 msec.
{9}: 80 msec.
System *1
Page
r
16
Privacy Mode*9
{1}{9}{4}
{1}: On {0}: <Off>
r
–
Base Unit PIN
{1}{3}{2}
<0000>
r
26
{1}: On {0}: <Off>
Repeater Mode
{1}{3}{8}
r
27
Register H.set
{1}{3}{0}
–
–
26
Cancel
Register
{1}{3}{1}
–
–
26
Display
(Change language)
{1}{1}{0}
–
13
<English>
*1 If “System” column is checked, you do not need to program the same item using
another handset.
*2 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*3 When the ringer volume is turned off, ~ is displayed and the handset does not ring
for outside calls.
However even when the ringer volume is set to off, the handset still rings for alarm
(page 25), intercom calls (page 31), and paging (page 31).
*4 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2007
Copyrights Vision Inc.
*6 Turn this feature off if you prefer not to hear key tones while you are dialling or
pressing any keys, including confirmation tones and error tones.
*7 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*8 The recall/flash time depends on your telephone exchange or host PBX. Contact
your PBX supplier if necessary.
23
TG5511-6511-6512CX(e-e).book Page 24 Friday, April 9, 2010 4:32 PM
Programming
*9 To prevent other users from joining your conversations with outside callers, turn
this feature on.
24
TG5511-6511-6512CX(e-e).book Page 25 Friday, April 9, 2010 4:32 PM
Programming
Special programming
Alarm
An alarm sounds at the set time for 3
minutes once or daily. Alarm can be set
for each handset.
Important:
L Set the date and time beforehand
(page 13).
1
2
8 i {#}{7}{2}{0}
{V}/{^}: Select the desired alarm
option. i M
“Off”
Turns alarm off. Go to step 6.
“Once”
An alarm sounds once at the set
time.
“Daily”
An alarm sounds daily at the set time.
Go to step 4.
3
Enter the desired date and month.
iM
4
5
Set the desired time. i M
6
M i {ic}
L When the alarm is set, E is
displayed.
{V}/{^}: Select the desired alarm
tone. i M
L We recommend selecting a
different ringer tone from the one
used for outside calls.
Note:
L To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
L When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
Changing the handset name
Each handset can be given a
customised name (“Bob”, “Kitchen”,
etc.). This is useful when you make
intercom calls between handsets. You
can also select whether or not the
handset name is displayed in standby
mode. The default setting is “Off”. If
you select “On” without entering any
handset name, “Handset 1” to
“Handset 6” is displayed.
1
2
8 i {#}{1}{0}{4}
3
4
M
5
Enter the desired name (max. 10
characters; page 32).
L If not required, go to step 3.
{V}/{^}: Select the desired setting.
i M 2 times
{ic}
Storing an area code to be
deleted automatically
In some situations, phone numbers
stored automatically in the caller list
(page 28) will include area codes. If you
do not want to dial the area code when
making calls from the caller list, you can
store the area code which you want the
unit to delete automatically.
Example: You have stored the area
code “123”. If you make a call from the
caller list to the phone number “123-4567890”, the unit dials “456-7890”.
1
2
8 i {#}{2}{5}{5}
Enter an area code (5 digits max.).
i M i {ic}
25
TG5511-6511-6512CX(e-e).book Page 26 Friday, April 9, 2010 4:32 PM
Programming
Changing the base unit PIN
(Personal Identification
Number)
Important:
L If you change the PIN, please make
note of your new PIN. The unit will not
reveal the PIN to you. If you forget
your PIN, contact an authorised
service centre.
1
2
8 i {#}{1}{3}{2}
3
Enter the new 4-digit base unit PIN.
i M i {ic}
Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L The additional handset model
recommended for use with this unit is
noted on page 4. If another handset
model is used, certain operations
(handset settings, base unit settings,
etc.) may not be available.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base unit
(for example, _ is displayed even when
the handset is near the base unit), reregister the handset.
26
2
Base unit:
Press and hold {x} for about 5
seconds. (No registration tone)
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L The next step must be completed
within 90 seconds.
3
Handset:
Wait until “Base PIN” is displayed.
i Enter the base unit PIN (default:
“0000”). i M
L If you forget your PIN, contact an
authorised service centre.
L When the handset has been
registered successfully, w is
displayed.
Enter the current 4-digit base unit
PIN (default: “0000”).
Registering a unit
1
8 i {#}{1}{3}{0}
Handset:
Note:
L While registering, “Base in
registering” is displayed on all
registered handsets.
L When you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.
Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored to the
base unit. This allows the handset to end
its wireless connection with the system.
1
8 i {#}{1}{3}{1}
L All handsets registered to the
base unit are displayed.
2
{V}/{^}: Select the handset you
want to cancel. i M
3
{V}/{^}: “Yes” i M
L A confirmation tone sounds.
L The handset does not beep when
cancelling its own registration.
4
{ic}
TG5511-6511-6512CX(e-e).book Page 27 Friday, April 9, 2010 4:32 PM
Programming
Increasing the range of the
base unit
You can increase the signal range of the
base unit by using a DECT repeater.
Please use only the Panasonic DECT
repeater noted on page 4. Contact your
Panasonic dealer for details.
Important:
L Before registering the repeater to this
base unit, you must turn the repeater
mode on.
L Do not use more than one repeater at
a time.
Setting the repeater mode
1
2
8 i {#}{1}{3}{8}
{V}/{^}: Select the desired setting.
i M i {ic}
Note:
L After turning the repeater mode on or
off, _ is displayed on the handset
momentarily. This is normal and the
handset can be used once w is
displayed.
27
TG5511-6511-6512CX(e-e).book Page 28 Friday, April 9, 2010 4:32 PM
Caller ID Service
– Being replaced on the base unit or
charger.
– Pressing {ic}.
Using Caller ID service
Important:
L This unit is Caller ID compatible. To
use Caller ID features, you must
subscribe to a Caller ID service.
Contact your service provider/
telephone company for details.
Phonebook name display
When caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in
the caller list.
Caller ID features
When an outside call is being received,
the caller’s phone number is displayed.
Caller information for the last 50 callers
is logged in the caller list from the most
recent call to the oldest.
L If the unit cannot receive caller
information, the following is displayed:
– “Out of Area”: The caller dials
from an area which does not
provide a Caller ID service.
– “Private Caller”: The caller
requests not to send caller
information.
L If the unit is connected to a PBX
system, caller information may not be
properly received. Contact your PBX
supplier.
Missed calls
If a call is not answered, the unit treats it
as a missed call and y is displayed. This
lets you know if you should view the
caller list to see who called while you
were away.
Even if only one missed call in the caller
list is viewed (page 28), y disappears
from the display. When you receive
another new call, y is displayed again.
Note:
L Even when there are unviewed
missed calls, y disappears from the
standby display if the following
operation is performed by one of the
registered handsets:
28
Caller list
Important:
L Only 1 person can access the caller
list at a time.
L Make sure the unit’s date and time
setting is correct (page 13).
Viewing the caller list and
calling back
1 {<} (y)
2 Press {V} to search from the most
recent call, or press {^} to search
from the oldest call.
L If > is displayed, not all of the
information is shown. To see the
remaining information, press {>}.
To return to the previous screen,
press {<}.
3
To call back, press {C}.
To exit, press {ic}.
Note:
L If the entry has already been viewed
or answered, “Q” is displayed, even if
it was viewed or answered using
another handset.
L If you do not want to dial the area code
when making calls from the caller list,
you can store the area code which you
want the unit to delete automatically
(page 25).
TG5511-6511-6512CX(e-e).book Page 29 Friday, April 9, 2010 4:32 PM
Caller ID Service
Editing a caller’s phone
number before calling back
1 {<} (y)
2 {V}/{^}: Select the desired entry.
L If > is displayed, not all of the
information is shown. To see the
remaining information, press {>}.
To return to the previous screen,
press {<}.
3
~ i Edit the number.
L Press dial key ({0} to {9}) to add,
^ to delete.
4
{C}
Erasing selected caller
information
1 {<} (y)
2 {V}/{^}: Select the desired entry.
3 W i {V}/{^}: “Yes” i M
i {ic}
Erasing all caller information
1 {<} (y)
2 W i {V}/{^}: “Yes” i M
i {ic}
Storing caller information to
the phonebook
1 {<} (y)
2 {V}/{^}: Select the desired entry.
iI
3
4
{V}/{^}: “Phonebook” i M
To store the name, continue from
step 2, “Adding entries”, page 18.
29
TG5511-6511-6512CX(e-e).book Page 30 Friday, April 9, 2010 4:32 PM
Voice Mail Service
Voice mail service
Voice mail is an automatic answering
service offered by your service provider/
telephone company. After you subscribe
to this service, your service provider/
telephone company’s voice mail system
answers calls for you when you are
unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/
telephone company, not your telephone.
When you have new messages, 6 is
displayed on the handset if message
indication service is available. Please
contact your service provider/telephone
company for details of this service.
Important:
L If 6 still remains on the display even
after you have listened to new
messages, turn it off by pressing and
holding {#} for 2 seconds.
30
TG5511-6511-6512CX(e-e).book Page 31 Friday, April 9, 2010 4:32 PM
Intercom/Locator
Intercom
Intercom calls can be made between
handsets.
Note:
L If you receive an outside call while
talking on the intercom, you hear 2
tones. To answer the call, press
{ic}, then press {C}.
L When paging the handset, the paged
handset beeps for 1 minute.
Making an intercom call
1 8i4
2 {V}/{^}: Select the desired unit. i
M
L To stop paging, press {ic}.
3
When you finish talking, press
{ic}.
Answering an intercom call
1 Press {C} to answer the page.
2 When you finish talking, press
{ic}.
Handset locator
You can locate a misplaced handset by
pressing {x} on the base unit.
L All registered handsets beep for 1
minute.
To stop paging, press it again or {ic}
on the handset.
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can
be made between 2 handsets.
1
During an outside call, press 4 to
put the call on hold.
2
{V}/{^}: Select the desired unit. i
M
3
Wait for the paged party to answer.
L If the paged party does not
answer, press ^ to return to the
outside call.
4
To complete the transfer:
Press {ic}.
L The outside call is being routed to
the destination unit.
To establish a conference call:
Press w.
L To leave the conference, press
{ic}. The other 2 parties can
continue the conversation.
L To put the outside call on hold,
press H. To resume the
conference, press w.
Note:
L If you want to return to the outside call
after the paged party answers, press
W.
Answering a transferred call
Press {C} to answer the page.
31
TG5511-6511-6512CX(e-e).book Page 32 Friday, April 9, 2010 4:32 PM
Useful Information
Character entry
The dial keys are used to enter characters and numbers. Each dial key has multiple
characters assigned to it. The characters that can be entered depend on the
character entry mode (page 32).
– Press {<} or {>} to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press ^ to erase the character or number highlighted by the cursor. Press and
hold ^ to erase all characters or numbers.
– Press {*} (A→a) to switch between uppercase and lowercase.
– To enter another character located on the same dial key, press {>} to move the
cursor to the next space, then press the appropriate dial key.
– If you do not press any dial key within 5 seconds after entering a character, the
character is fixed and the cursor moves to the next space.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek
(F), Extended 1 (G), Extended 2 (H), and Cyrillic (I). When in these entry
modes except Numeric, you can select which character is entered by pressing a dial
key repeatedly.
When the unit displays the character entry screen:
/ i {V}/{^}: Select a character entry mode. i M
Note:
L in the following tables represents a single space.
Alphabet character table (ABC)
Numeric entry table (0-9)
Greek character table (M)
32
TG5511-6511-6512CX(e-e).book Page 33 Friday, April 9, 2010 4:32 PM
Useful Information
Extended 1 character table (N)
L The following are used for both uppercase and lowercase:
Extended 2 character table (O)
L The following are used for both uppercase and lowercase:
Cyrillic character table (P)
33
TG5511-6511-6512CX(e-e).book Page 34 Friday, April 9, 2010 4:32 PM
Useful Information
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message
Cause/solution
Base no power
or
No link.
Reconnect AC
adaptor.
L The handset has lost communication with the base
unit. Move closer to the base unit and try again.
L Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L The handset’s registration may have been cancelled.
Re-register the handset (page 26).
Check Phone Line
L The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 8).
Failed
L Phonebook copy failed (page 19). Confirm the other
handset (the receiver) is in standby mode and try
again.
Incomplete
L The receiver’s phonebook memory is full. Erase the
unwanted phonebook entries from the other handset
(the receiver) and try again.
Memory Full
L The phonebook memory is full. Erase unwanted
entries (page 18).
Use rechargeable
battery.
L A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 6.
You must first
subscribe to
Caller ID.
L You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.
34
TG5511-6511-6512CX(e-e).book Page 35 Friday, April 9, 2010 4:32 PM
Useful Information
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect
the base unit’s AC adaptor and turn off the handset, then reconnect the base unit’s
AC adaptor and turn on the handset.
General use
Problem
Cause/solution
The handset does not turn on
even after installing charged
batteries.
L Place the handset on the base unit or charger
to turn on the handset.
The unit does not work.
L Make sure the batteries are installed correctly
(page 9).
L Fully charge the batteries (page 9).
L Check the connections (page 8).
L Unplug the base unit’s AC adaptor to reset the
unit and turn off the handset. Reconnect the
adaptor, turn on the handset and try again.
L The handset has not been registered to the
base unit. Register the handset (page 26).
I cannot hear a dial tone.
L Make sure that you are using the supplied
telephone line cord. Your old telephone line
cord may have a different wiring configuration.
L The base unit’s AC adaptor or telephone line
cord is not connected. Check the connections.
L Disconnect the base unit from the telephone
line and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to
have the unit repaired. If the working
telephone does not operate properly, contact
your service provider/telephone company.
Programmable settings
Problem
Cause/solution
The display is in a language I
cannot read.
L Change the display language (page 13).
I cannot activate the eco mode.
L You cannot set eco mode when you set the
repeater mode “On”. If required, set the
repeater mode to “Off” (page 27).
35
TG5511-6511-6512CX(e-e).book Page 36 Friday, April 9, 2010 4:32 PM
Useful Information
Problem
Cause/solution
I cannot register a handset to a
base unit.
L The maximum number of handsets (6) is
already registered to the base unit. Cancel
unused handset registrations from the base
unit (page 26).
L You entered the wrong PIN. If you forget your
PIN, contact an authorised service centre.
Battery recharge
Problem
Cause/solution
The handset beeps and/or )
flashes.
L Battery charge is low. Fully charge the
batteries (page 9).
I fully charged the batteries, but
– ) still flashes or
– the operating time seems to
be shorter.
L Clean the battery ends (S, T) and the
charge contacts with a dry cloth and charge
again.
L It is time to replace the batteries (page 9).
The handset display is blank.
L The handset is not turned on. Turn the power
on (page 13).
Making/answering calls, intercom
Problem
Cause/solution
_ is displayed.
L The handset is too far from the base unit.
Move closer.
L The base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the
base unit.
L The handset is not registered to the base unit.
Register it (page 26).
L Activating one touch eco mode reduces the
range of the base unit in standby mode. If
required, turn eco mode off (page 14).
36
TG5511-6511-6512CX(e-e).book Page 37 Friday, April 9, 2010 4:32 PM
Useful Information
Problem
Cause/solution
Noise is heard, sound cuts in
and out.
L You are using the handset or base unit in an
area with high electrical interference. Reposition the base unit and use the handset
away from sources of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
L Unplug the base unit’s AC adaptor to reset the
unit and turn off the handset. Reconnect the
adaptor, turn on the handset and try again.
Sound quality seems to be
getting worse.
L You have registered a handset that is not
recommended (page 4). The clearest sound
quality is only possible by registering the
recommended handset.
The handset does not ring.
L The ringer volume is turned off. Adjust ringer
volume (page 22).
I cannot make a call.
L The dialling mode may be set incorrectly.
Change the setting (page 13).
L The handset is too far from the base unit.
Move closer and try again.
L Another unit is in use. Wait and try again later.
L The key lock feature is turned on. Turn it off
(page 17).
37
TG5511-6511-6512CX(e-e).book Page 38 Friday, April 9, 2010 4:32 PM
Useful Information
Caller ID
Problem
Cause/solution
Caller information is not
displayed.
L You must subscribe to a Caller ID service.
Contact your service provider/telephone
company for details.
L If your unit is connected to any additional
telephone equipment, remove and plug the
unit directly into the wall jack.
L If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
Caller information is slow to
display.
L Depending on your service provider/
telephone company, the unit may display the
caller’s information at the 2nd ring or later.
L Move closer to the base unit.
Time on the unit has shifted.
L Incorrect time information from incoming
Caller ID changes the time. Set the time
adjustment to “Manual” (off) (page 22).
The name stored in the
phonebook is not fully
displayed while an outside call
is being received.
L Edit the phonebook entry name to fit in 1 line
of text (page 18).
Liquid damage
Problem
Cause/solution
Liquid or other form of moisture
has entered the handset/base
unit.
L Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least
3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and
charge fully before use. If the unit does not
work properly, contact an authorised service
centre.
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
38
TG5511-6511-6512CX(e-e).book Page 39 Friday, April 9, 2010 4:32 PM
Useful Information
Wall mounting
Note:
L Make sure that the wall is strong enough to support the weight of the unit.
■ Base unit
■ Charger
(KX-TG6511/KX-TG6512)
(KX-TG6512)
25 mm
57 mm
Screws
(Not supplied)
Screws
(Not supplied)
Hooks
Hook
39
TG5511-6511-6512CX(e-e).book Page 40 Friday, April 9, 2010 4:32 PM
Index
Privacy mode: 23
Index
A
Additional handsets: 26
Alarm: 25
Answering calls: 15
Area code: 25
Auto talk: 15
B
Battery: 9
C
Caller ID service: 28
Caller list: 28
Caller list edit: 29
Call share: 17
Call waiting: 16
Call Waiting Caller ID: 16
Chain dial: 18
Character entry: 32
Conference calls: 31
Control type: 11
D
Date and time: 13
Dialling mode: 13
Direct command: 22
Display
Contrast: 22
Language: 13
E
Eco mode: 14
Error messages: 34
H
Handset
Deregistration: 26
Locator: 31
Name: 25
Registration: 26
Hold: 16
I
Intercom: 31
K
Key lock: 17
Keytones: 22
M Making calls: 15
Missed calls: 28
Mute: 16
P
40
Pause: 15
Phonebook: 18
PIN: 26
Power failure: 9
Power on/off: 13
R
Recall/flash: 16
Redialling: 15
Repeater: 27
Ringer tone: 22
S
Speakerphone: 15
T
Temporary tone dialling: 16
Time adjustment: 22
Transferring calls: 31
Troubleshooting: 35
V
Voice mail: 30
Volume
Receiver: 15
Ringer (Handset): 16, 22
Speaker: 15
W Wall mounting: 39
TG5511-6511-6512CX(e-e).book Page 41 Friday, April 9, 2010 4:32 PM
Notes
41
TG5511-6511-6512CX(e-e).book Page 42 Friday, April 9, 2010 4:32 PM
Notes
42
TG5511-6511-6512CX(e-e).book Page 43 Friday, April 9, 2010 4:32 PM
Notes
43
TG5511-6511-6512CX(e-e).book Page 44 Friday, April 9, 2010 4:32 PM
For your future reference
We recommend keeping a record of the following information to assist with any repair
under warranty.
Serial No.
Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
Copyright:
This material is copyrighted by Panasonic System Networks Co., Ltd., and may be
reproduced for internal use only. All other reproduction, in whole or in part, is
prohibited without the written consent of Panasonic System Networks Co., Ltd.
© Panasonic System Networks Co., Ltd. 2010
PNQX2496ZA
CC0610DJ0 (A)