Rick, Stockholm Rumble &

Rick, Stockholm Rumble & Ton-Up Hell Night, May 2009. Bike: Builder, Urban Engstrom, Triumph Flat Tracker.
Helmet: Jet 80502, EK Renegade. © picaem
The Davida Speedster
Bill Swallow, Olivers Mount, July 2004.
© Brian Maher/Davida
Jules & Cassandra, Liverpool 2005.
Helmets: Jet. © Ben Part
“The lightness and mobility
of the Davida Jet and goggle
combination allowed me
to get round bends faster”.
Racer, Bill Swallow,
Huddersfield, England.
Goggle retainer
Fredrik Sandrtrom,
Stockholm.
© Mats Olofsson
Made at Davida
At Davida we have been defining quality in our own way
for more than thirty years. A genuine and relentless pursuit
rewarded with a worldwide reputation for the quietest,
most comfortable and well made helmets available.
We design and manufacture all our helmets at the Davida
workshops near Liverpool in England. Our design engineers
work hand in hand with our team of technicians to
constantly improve quality and performance.
The Davida Jet
The Davida Speedster is evocative of the helmets from the
early 70s. It is still made to the same precise and exacting
manufacturing standards as it has always been, although
unable to be approved for road use due to recent regulatory
changes. The helmet, made with a composite fibreglass
shell and a polystyrene shock absorption liner, is leather
lined and comes in three sizes. Studs for visors and peaks;
state when ordering if required.
The Davida Speedster does not conform to any current
helmet safety standard
Nikki, Seattle, USA. © Troy Critchlow
Mike Duff, Peter Williams
European Racing Circus 1960s.
Photographer unknown. © Davida
Sizes: S 54-56cm M 56-58cm L 58-60cm
The Davida Classic
Goggle retainer
Goggle retainer
The Davida Classic retains all the original design features
of the 1950s low dome helmet. Manufactured using
traditional materials and techniques, the Davida Classic is a
hand built product of exceptional quality. Neat and compact
in design, it is an authentic example of one of the first
helmets manufactured. Fibreglass shell, leather interior,
side flaps and neck curtain.
The Davida Jet integrates the finest features of the
traditional open face helmet into a modern safety product
that meets the latest European Safety Standards ECE R22-05.
We have developed a unique design process to produce a
superior fitting helmet. The use of extensive human head
data has enabled us to produce helmets that are
proportional to head size. The Jet comes in three shell sizes
and six helmet sizes. Fibreglass composite shell, leather
lined interior. Studs for visors and peaks state when
ordering if required.
The unique shape of the Jet’s fibreglass shell and liner
follows the contours of the head; narrower at jaw than at
the crown, creating a snug fit that ensures the Davida Jet is
stable as a rock. As well as completely eliminating ‘lift’ this
ergonomic design hugs the head reassuringly and makes
for a pleasantly quiet ride. Aviator Retro Pilot T1, T2 and T3
have been specially designed to give an excellent fit with
the Davida Jet Helmet.
Sizes: XS 53-54cm S 54-56cm M 56-58cm L 58-60cm XL 60-62cm XXL 62-64cm
Unknown Rider, Manx GP, 2007. © Fid The Lid
Jules, Liverpool, 2002. © Ken Danks
Helmet: Jet 80220 Goggles: Aviator T1.
The Davida Classic does not conform to any current
helmet safety standard.
Sizes: S 54-58cm M 58-60cm L 61-64cm
All our designs can be applied to any helmet in our range.
Please state the 5 digit part number when ordering. The first 2 digits of the part number describe the helmet type.
The last 3 digits describe the colour and the paintwork design. Designs shown below. Optional studs, for visor and peak
fitting, please state when ordering. See our website for full range of colourways and bespoke designs.
Choose Your Paintwork
80--Standard
_ _102
Silver
Two Tone
_ _104
Gloss Black
_ _105
Matt Black
_ _113
Cream,
Black Leather
Two Tone
_ _ 270
Black/
White Check
90---
_ _ 200
Sliver/Black
Standard
_ _ 220
Black/Silver
_ _ 221
Black/White
Complex
_ _ 290
Red/White/
Green
_ _ 291
Cream,
Red/White/Blue
Stripe
_ _ 292
_ _ 500
Eggshell Blue,
Mashed Green
Red/White/Blue
Stripe
_ _ 501
Confederate
_ _ 502
EK Renegade
_ _ 506
_ _ 507
White,
Cream, UJ Sides
Red/White/Blue
Target Sides
_ _ 508
General Lee
_ _ 509
White/Red 42
_ _105
Matt Black
_ _113
Cream
_ _ 200
Sliver/Black
_ _ 204
Sliver/Red
_ _ 220
Black/Silver
_ _ 221
Black/White
_ _ 510
Black/Silver
Thunderbolt
_ _513
Cream,
Brown Leather
_ _ 270
Black/
White Check
Complex
_ _ 290
Red/White/
Green
_ _ 500
Mashed Green
_ _ 501
Confederate
_ _ 530
Union Jack
_ _ 532
Black/
Orange Flame
_ _ 533
Black/
Silver Flames
Complex
_ _ 531
_ _ 532
Stars and Stripes Black/
Orange Flame
_ _ 533
Black/
Silver Flames
_ _ 535
_ _ 541
Mono Union Jack Black/
Orange Check
Complex
_ _ 543
Metallic Stars
and Stripes
_ _104
Gloss Black
Two Tone
Complex
_ _ 530
Union Jack
_ _102
Silver
Two Tone
Complex
_ _ 504
Mashed
Matt Black
60---
_ _ 542
Cream B
Orange/Gold
Bespoke Paintwork
_ _ 583
White,
Red/White/Blue
Stripe SS1
_ _ 591
Cream,
Red/White/Blue
Stripe Target
_ _ 592
_ _ 801
Eggshell Blue,
Matt Silver
Red/White/Blue Pinstripe
Stripe Target
We offer a bespoke paintwork service. This
is by special order only. The delivery time is
sometimes longer. The paintwork examples
shown are designs we have produced as
requested by some of our customers.
_ _ 510
Black/Silver
Thunderbolt
Complex
_ _ 534
Silver/
Black Flames
_ _ 535
Mono Union Jack
Racing Series
Sizing
These are just 5
examples from 17
designs within our
Racing Series.
How to measure your head:
To select the correct size helmet, simply
measure the full circumference of the
head above the ears and around the
forehead. Sizing strip supplied with
Classic helmet for your own personal
final fitting if required.
_ _ 704
_ _ 705
_ _ 707
_ _ 709
_ _ 712
Ralph
Bryans
John
Cooper
Esso
Gunnerson
Umberto
Masetti
Tommy
Robb
Steve, Moto Giro
d’Italia 2002.
© Simon Mills
Aviator Retro Standard Goggles
Case Goggle and Lenses
All Retro Standard goggles supplied with
clear polycarbonate 10/10 lenses complying
to EC PREN 1988 and two sets of acetate
lenses, in smoke and yellow, including
protective carrying case.
Replacement Lenses Available:
67101 Clear 67102 Smoke 67103 Yellow
67105 Blue Mirror curved polycarbonate
Retro Standard – chrome shown
Padded with black, anti-allergic and
waterproof, natural pneumatic rubber
providing a firm contact area and airtight
seal. A neat and compact goggle
available in four finishes.
67001 Gunmetal
67002 Chrome
67003 Gold
67007 Matt Black
Retro Standard Cuir Mask
Padded with a one piece soft leather
mask which is foam filled, hand-stitched
and treated for water resistance.
Provides a very flexible fit and effective
air tight seal. This model does not have
an adjustable nose bridge.
67065 Chrome/Brown mask
67063 Black Chrome/Black mask
67064 Chrome/Black mask
Retro Standard Mousse
– gunmetal shown
Padded with 15mm wide black
anti-allergic, waterproof foam rubber
providing a soft, flat contact area
and air tight seal.
67041 Gunmetal (only)
Styles & Lenses
Gunmetal
Chrome/Blue
Mirror Lens,
optional
Gold
Aviator Retro Special Goggles
Tamara, Tunnel of Love.
© Ben Part
Retro Standard Cuir – chrome shown
Padded with 12mm wide, soft black
leather which is foam filled,
hand-stitched and treated for water
resistance. Provides a very comfortable
and effective air tight seal.
67062 Chrome (only)
Matt Black
Mousse
Gunmetal
Retro Special Optical
Case Goggle and Lenses
All Retro Special goggles are supplied
with clear polycarbonate 10/10 lenses
complying to EC PREN 1988 and two sets
of acetate lenses, in smoke and yellow,
including protective carrying case.
Replacement Lenses Available:
67111 Clear
67112 Smoke
67113 Yellow
67114 Clear curved polycarbonate
67115 Blue Mirror curved polycarbonate
Cuir
Chrome
Cuir Mask
Chrome
Styles & Lenses
Ring clip feature on Retro
Special models allows
headband replacement.
Gunmetal/Blue Mirror lens
Retro Special
Padded with black, anti-allergic,
waterproof, natural pneumatic rubber
which provides a firm contact and
airtight seal. *(67071 supplied with blue
mirror lens and 2 sets of acetate lenses
in smoke and yellow.)
67071* Gunmetal/Blue Mirror
Retro Special Optical
Padded with black, anti-allergic,
waterproof pneumatic rubber.
67031 Gunmetal
67032 Chrome
Clasp feature on optical
models allows simple lens
changing.
Optical/Gunmetal
Optical/Chrome
Karen, Liverpool, 2004.
© Keiron/Davida
Aviator Retro Pilot Goggles T1, T2 and T3
Specially designed to give an excellent fit with the Davida Jet Helmet
Retro Pilot T1
Padded with foam and covered with black
goats leather. The curved body and frame
are specifically to give a wide peripheral
vision and excellent fit around the face
and into the aperture of most open
face jet helmets on women and men.
670722 Gunmetal/Clear lenses
670732 Chrome/Clear lenses
670742 Gold/Clear lenses
Aviator Super Nylsun
Halcyon Mark Goggles
Please see www.davida.co.uk for images and full description of every Halcyon style
Ed Pole Tudor, Tunnel of Love.
© Ben Part
Retro Pilot T3
T3 goggles are identical to the T1 goggles
but have a reduced amount of padding
around the frames. Without
compromising on comfort the overall
effect is to make the T3 smaller in size
and therefore a better fit with smaller
helmet sizes and also benefit people
with slim or narrow faces.
670723 Gunmetal
670733 Chrome
670743 Gold
Cassandra, Llanberis,
Wales 2004.
© Ben Part
All Pilot Goggles are supplied with protective
bag and fitted with clear lenses. Optional
silver mirror lenses shown supplied extra.
Retro Pilot T2 Optical – chrome only
For use over spectacles. Specifications
same as T1 but designed with cut-outs
in padding to allow arms of spectacle
frames to pass through.
Excellent clearance for bridge
and suitable for most spectacles.
670762 Chrome/Clear lenses
67172 Clear (a) (fitted as standard)
Optional Lenses (supplied extra)
67173 Yellow (b) 67174 Smoke (c)
67175 Silver Mirror (d)
67176 Blue Mirror (e)
Styles & Lenses
Mark 4 Split Lens, Click Nose Bridge Adjuster 61001 Silver Cross Chrome/Black padded leather
67080 Super Nylsun Kit
Supplied with smoke lenses and 2 sets of
interchangeable lenses, in clear and yellow.
Gunmetal
Yellow
Clear
Blue
Mirror
Silver
Mirror
Gold
Chrome
Smoke
Mark 6
Curved Lens, Click Nose Bridge Adjuster
61019 Rider Silver/Black pvc
61020 Racing Black/Black pvc
61021 Deluxe Chrome/Black pvc
Mark 7
Curved Lens, Click Nose Bridge Adjuster
61022 Rider Silver/Black pvc
61023 Racing Black/Black pvc
61024 Deluxe Chrome/Black pvc
Mark 10
Curved Lens, Knurled Nose Bridge Adjuster
61025 Rider Silver/Black pvc
61026 Racing Black/Black pvc
61027 Deluxe Chrome/Black pvc
Mark 8 – shown
Split Lens, Click Nose Bridge Adjuster
61003 Service Silver/Brown pvc
61004 Rider Silver/Black pvc
61005 Racing Black/Black pvc
61006 Deluxe Chrome/Black pvc
61018 RAF Replica Blue/Brown leather
Mark 9 – shown
Split Lens, Knurled Nose Bridge Adjuster
61007 Super Jet Silver/Brown pvc
61008 Rider Silver/Black pvc
61009 Racing Black/Black pvc
61010 Vintage Silver/Brown leather
61017 Deluxe Chrome/Black pvc
Mark 49 – shown
Split Lens, Knurled Nose Bridge Adjuster
61011 Antique Black
Gold/Antique Black leather
61012 Antique Brown
Gold/Antique Brown leather
61013 Red Chrome/Red leather
61014 White Chrome/White leather
61015 Racing Black/Black leather
61016 Deluxe Chrome/Black leather
Replacement Headbands
Brown or black replacement elastic
headbands. 61106 Black 61107 Brown
Replacement Lenses
Curved frames made
of flexible moulded
plastic provides an
exceptionally good fit
with Jet helmets.
Super Nylsun
Replacement Lenses Available:
67181 Clear
67182 Smoke
67183 Yellow
MARK SL
SPLIT LENS
MARK CL
CURVED LENS
Styles & Lenses
Silver frame/Brown mask
Mk8 Service
Mk9 Super Jet
Mk9 Vintage/leather
Chrome frame/Black mask
Mk8-Mk9 Deluxe
Silver frame/Black mask
Mk8-Mk9 Rider
Black frame/Black mask
Mk8-Mk9 Racing
Blue frame/
Brown leather mask
Mk8 RAF Replica
Antique Gold frame/
Black mask
Chrome frame/Red mask
Chrome frame/White mask
Chrome frame/Black mask
Optional interchangeable lenses
are polycarbonate.
61100 Clear 61101 Smoke
How to choose your Halcyon Goggle - 1. Split Lens or Curved Lens? 2. Click Adjuster or Knurled Adjuster? 3. Leather or PVC? 4. What colour frame?
Replacement Lenses
Davida 74 WRS Kit
The Davida WRS Mk1 Riding Glasses Kit combines
the best features of aerodynamic styled-sunglasses
with motorcycle riding glasses. The WRS Mk1 Kit
contains both an elasticated headband for riding
glasses use as well as arms to convert the frames
into sunglasses. A full range of spare parts is
available to cover all eventualities. Made from
lightweight and flexible TR90, WRS Mk1’s are not
easily broken. TR90 is a stronger and more flexible
material than polycarbonate, allowing them to
mould into a comfortable and aerodynamic shape,
giving an exceptionally close and wind resistant fit
without creating uncomfortable pressure points
across the nose-bridge or temples.
Optical The Davida WRS can be converted into
spectacles with prescription lenses or enhanced with
photochromatic lenses. Please see www.davida.co.uk
for up-to-date information on these options.
74001 – 74 WRS Mk1 Black Davida Kit
Supplied with detachable arms, elastic headband,
smoke lens fitted, and an additional pair of clear
and yellow lenses, and a protective case.
74101
Clear
74104
Orange
74102
Smoke
74105
Green
74103
Yellow
Replacement Parts
74106
Brown
Smoke
74109 Lens carrier
74110 Replacement arms with
black Davida Logo
74111 Replacement arms with
red Davida Logo
74115 Replacement elastic strap
Davida Leathers
Over the years there
has been almost as
many variations on
the black leather as
there are individual
motorcyclists, with
every rider having
at least one, but their
essential appeal and
simplicity remains
the same.
As with our helmets,
we have taken great
care to design and
manufacture our black
leathers so they fit well
and look iconic in their
own right.
Mean Fuckers, London, 1980s.
© Cress
See our website for
full sizing information.
Mk 1 Jacket
Made from a smooth, soft and supple leather – with strong
zips and studs, clean classic lines, minimal fuss and maximum
comfort. Mandarin collar, slightly raised and lightly padded
around the nape, fixed with 2 studs – Original YKK aluminium
zips – 15mm zipped sleeves at cuffs – Two outside zipped
hand pockets – One outside zipped chest pocket – Fully quilted
liner for warmth.
440300 Ladies – Sizes: UK 8-18, US 6-16, Euro 36-46
440100 Mens – Sizes: UK/US 36-56, Euro 46-66
Mk 1 Jeans – Ladies
Made from a smooth, soft supple leather – with strong zips and
studs, clean classic lines, minimal fuss and maximum comfort.
Single stitched seams – Original YKK front zip in black
– No belt loops on waistband – Waistband fastened by
concealed hook & eye and Velcro. No rear pockets for bottom
streamlining – Two horizontal front pockets – Extra long leg
length to cut and fit – 3⁄4 length leg lining.
440400 – Sizes: UK 8-18, US 6-16, Euro 36-46
Mk 1 Jeans – Mens
Made from a smooth, soft supple leather – with strong zips and
studs, clean classic lines, minimal fuss and maximum comfort.
Double stitched seams – Original YKK Aluminium zip in bronze
– Six belt loops on waistband – Waistband fastened with one
hook and one stud – Two rear pockets – Two front pockets,
one with coin pocket – Extra long leg length to cut and fit
– 3⁄4 length leg lining.
440200 – Sizes: UK/US 30-42, Euro 40-52
Climax 500 Goggles
Scott Junior Goggles
65500 Chrome/Black
65510 Climax 510
Square Square
Chrome/Black
65521 Climax 521
Chrome/Black
Pear shaped frame and curved lenses providing a wide
peripheral vision.
Nannini Goggles
Optical
Foam padding onto durable plastic frames. Interchangeable
polycarbonate lenses, supplied with clear as standard.
XSun Visors
73001 240mm Clear
73001L 279mm Clear
73002 240mm Smoke
73002L 279mm Smoke
73003 240mm Silver Mirror
73003L 279mm Silver Mirror
73004 240mm Blue Mirror
73004L 279mm Blue Mirror
69020 Nannini Roadstar
860 Plus Chrome/Black
Leather Mask
69021 Chrome/Brown
Leather Mask
Another option for riders requiring spectacles. The Nannini
Roadstar 860 Plus incorporates an internal mounting to hold
the prescription lenses which are held permanently in place
with a screw. Simply take goggles along to your optician
for glazing.
Vacuum Gauges
71SC89SBK Black.
Optional lenses:
7189SCLEAR Clear
7189SSMOKE Smoke
Manufactured since 1975, the Davida Vacuum
Gauge System is a proven workshop tool used
by professionals and home mechanics. Every
set is a hand built, quality product designed
for simple and accurate carburettor balancing.
Ready to use pre-damped gauges, fitted with
neoprene pipes and housed with a robust
powder-coated steel case. Supplied with brass
manifold adaptors and petrol pipe extensions.
Gauges 63mm diameter dials with clear and
easy to read 0.6 Bar Scale in 0.01 increments.
Built to industry standard, the internal gauge
instrumentation is made with brass
mechanism and copper alloy bourdon tube.
62004 System 6 – 62003 System 4
62002 System 3 – 62001 System 2
Universal, fits majority of helmets. 2 sizes 240mm fits with
the Davida Speedster and 279mm fits the Davida Jet.
4 colours: clear, smoke, silver mirror, blue mirror.
Accessories
www.davida.co.uk
Paulson Vista Visor & Peak
The peak attaches to a helmet with
3 studs. The optional, removable visor
is 75mm deep, coming just below
the eyes and is fixed in this position.
It cannot be flipped up and down.
A black or smoke peak can be supplied
with clear or smoke visor.
Peak – 72201 Black or 72206 Smoke
Visor – 72201V Clear or 72206V Smoke
Paulson Peaks
Bubble shaped – Universal fit.
72401 Gloss Black 24081 Matt Black
72402 White 72406 Smoke
Flat shaped – Universal fit.
72301 Gloss Black 72306 Smoke
Duck-billed shape – Universal fit.
72501 Paulson Moto Peak Black
Unlike black peaks, smoke peaks allow
some light through but prevents the
glare from strong sunshine.
Bubble Goggle by Paulson
Wide peripheral vision vented.
72102 Clear 72104 Yellow
72106 Smoke 72107 Blue
Jet Visor
Bob Health polycarbonate wrap around
visor with 5 press studs to fit Davida Jet
with 5 studs.
64101 Clear
The Classic Face Mask – Mk 2
Specifically designed to fit onto our
Davida Classic helmet. Made of single
layer of leather tailored to contour the
face with an improved warm and soft
laminated fabric liner. Six anti-misting
aerators secured to neck curtain by
two press studs.
60072 Black 60073 Brown
The Universal Face Mask – Mk 2
Specifically designed to fit under jetstyle helmets. Single layer of black
Chequered Tape
leather lined with an improved warm
Printed vinyl in four combinations
and soft laminated fabric liner. Eight
suitable for application on Davida
pieces of leather carefully shaped and
Classic. 30mm wide x 750mm long.
stitched for close fitting. Anti-mist
Adhesive backed tape.
aerators. Secured with adjustable black
40100 Black/White 40101 Black/Yellow elastic, hook and eye.
24072 Black 24073 Brown
40102 Black/Silver 40103 Silver/Red
Davida T-shirts
100% cotton in black only. Heavyweight 180gsm & shrink resistant
Impact T-shirt
Yellow/Black logo.
41001
Sizes: S, M, L, XL, XXL
Davida (UK) Ltd.
4-6 Pilgrim Street,
Birkenhead, Merseyside,
England CH41 5EH
tel +44 (0)151 647 2419
fax +44 (0)151 649 9611
Bob Heath Flip-Up Visor
The visor is permanently coupled to
the peak and is made of BS 41107A
approved hardened shatterproof,
scratch resistant polycarbonate.
The peak attaches to a helmet with
3 studs. The visor is deep enough to
cover the whole face and can be flipped
up and down through 4 positions.
Although the Bob Heath peak has slide
fittings and has been made to fit the
Davida Jet, Classic Jet and Speedster
they can be adjusted slightly to fit
other helmets, however it is not
guaranteed to be suitable with other
jet style helmets.
64001 BHV Davida Jet Flip Visor Clear
64003 BHV Davida Jet Flip Visor Smoke
64005 BHV Davida Jet Flip Visor Half Tint
64006 BHV Jet Flip (Small) Clear
(fits Speedster and Classic Jet)
64007 BHV Jet Flip (Small) Smoke
(fits Speedster and Classic Jet)
64008 BHV Jet Flip (Small) Half Tint
(fits Speedster and Classic Jet)
Davida T-shirt
White logo.
41002
Sizes: S, M, L, XL, XXL
Wing T-shirt
White logo.
41000 – Sizes: S, M, L, XL, XXL
Ordering and information contact:
Cosmic Pilot
T-shirt
White logo.
41003
Sizes: S, M, L, XL, XXL Speedster Visor
Bob Health polycarbonate wrap around
Davida Wing Sweatshirt 70% cotton,
visor with 5 press studs to fit Davida
30% polyester in black only. 280gsm
with drop shoulder and metal zip. White Speedster with 5 studs.
64103 Clear
logo. 41100 – Sizes: S, M, L, XL, XXL
email sales@davida.co.uk
See our website for a full range of
products and the location of distributors
and dealers worldwide.
Rick, Stockholm Rumble & Ton-Up Hell Night, May 2009. © picaem
At Davida we have been defining quality in our own way
for more than thirty years. A genuine and relentless pursuit
rewarded with a worldwide reputation for the quietest,
most comfortable and well made helmets available.
Studs Optional studs for visor/peak
(request when ordering).
Universal Facemask
24072 Black
24073 Brown
We design and manufacture all our helmets at the Davida workshops near Liverpool in England.
Our design engineers work hand in hand with our team of technicians to constantly improve quality
and performance. Each helmet is individually hand built to precise standards with the manufacturing
procedure carefully regulated. Our modern JET helmets maintain the highest standards of quality
control required by the ECE R22-05 safety standard certification. All our open face helmets have
a fibreglass composite shell and a leather lined interior throughout.
Inspired by our own love of motorcycles we continue to produce our unique and highly distinctive
range of hand built, leather lined open face helmets with classic lines and shapes that capture the
spirit of motorcycling-adventure and freedom.
The unique shape of the Jet’s fibreglass shell and liner has been designed to follow the natural shape
of the head; narrower at the jaw than at the crown. When combined with the interior, which also
follows these lines and extends them past the shell, the snug fit created ensures the Davida Jet is
stable as a rock. As well as completely eliminating ‘lift’, this ergonomic design hugs the head
reassuringly and makes for a pleasantly quiet ride.
madeat Davida
Our distinctive range of designs and traditional colours are inspired by the racers and street cultures
of the past. Each helmet is individually hand masked and decaled to create each colourway or if
desired we offer a bespoke service.
“Not only is the Davida Jet ultra-stylish,
it is also a superb fit. I wear it all the time...
Your work is inspirational”. Brian Crichton Associate Editor Classic Bike. Oct 2004.
The Davida Jet integrates superior fitting,
traditional styles and manufacturing into a
modern safety product that meets the latest
European safety standards; ECE R22-05.
code
80
Choose Your Paintwork
Please see our website for the full range of colourways and bespoke designs
Standard
80102
Silver
Two Tone
80104
Gloss Black
80105
Matt Black
80113
Cream,
Black Leather
Two Tone
80270
Black/
White Check
Jet Visor
Bob Health polycarbonate wrap around
visor with 5 press studs to fit Davida Jet
with 5 studs.
64101 Clear
80200
Sliver/Black
80220
Black/Silver
80221
Black/White
Complex
80290
Red/White/
Green
80291
Cream,
Red/White/
Blue Stripe
80292
80500
80501
Eggshell Blue, Mashed Green Confederate
Red/White/
Blue Stripe
80502
EK Renegade
80506
White, Red/
White/Blue
Target Sides
80507
Cream
UJ Sides
80508
General Lee
80513
Cream,
Brown Leather
80531
Stars and
Stripes
80532
80533
Black/
Black/
Orange Flame Silver Flames
Complex
80504
Mashed
Matt Black
80509
80510
White/Red 42 Black/Silver
Thunderbolt
Complex
The Davida Jet
European Safety Standard
ECE R22-05 certified.
ACU Gold Approved for racing.
3 shell sizes and 6 helmet sizes.
Fibreglass composite shell.
Superior quilted leather lined interior
and satin crown.
80530
Union Jack
80535
Mono
Union Jack
Complex
80541
80542
Black/
Cream B
Orange Check Orange/Gold
Bespoke
Goggle retainer.
Available in all the Davida styles
as standard as well as bespoke service.
80543
Metallic Stars
and Stripes
80583
White, Red/
White/Blue
Stripe SS1
80591
Cream,
Red/White/Blue
Stripe Target
80592
80801
Eggshell Blue, Matt Silver
Red/White/Blue Pinstripe
Stripe Target
We offer a bespoke paintwork service.
This is by special order only. The delivery
time is sometimes longer. Examples
shown are just a few of the designs
we have produced for customers.
THE COLOURWAYS SHOWN ARE A REPRESENTATION OF OUR DESIGNS AND THE IMAGES SHOWN ABOVE MAY NOT BE A JET HELMET.
Hannah, Amman Valley Flat Track, May 2010. © Ben Part
At Davida we have been defining quality in our own way
for more than thirty years. A genuine and relentless pursuit
rewarded with a worldwide reputation for the quietest,
most comfortable and well made helmets available.
We design and manufacture all our helmets
at the Davida workshops near Liverpool in
England. Our design engineers work hand
in hand with our team of technicians to
constantly improve quality and performance.
Each helmet is individually hand built to
precise standards with the manufacturing
procedure carefully regulated.
Studs Optional studs for visor/peak
(request when ordering).
Inspired by our own love of motorcycles we continue to produce our unique and highly
distinctive range of hand built, leather lined open face helmets with classic lines and shapes
that capture the spirit of motorcycling-adventure and freedom.
A lightweight helmet weighing just over 1100g, the Davida Ninety Two is our smallest-profile
helmet, manufactured to the highest quality control required by British Safety Standard
certification BS 6658: 1985 Type B. Made with a fiberglass composite shell reinforced with
Kevlar, a polystyrene shock absorption liner with additional protection around the ears and
a detachable washable fabric interior lining, the Davida Ninety Two is a modern safety product
which also combines traditional styling.
madeat Davida
Our distinctive range of designs and traditional colours are inspired by the racers and street
cultures of the past. Each helmet is individually hand masked and decaled to create each
colourway or if desired we offer a bespoke service.
Ergonomic Design
The Davida 92 has been especially
designed to be a close-fitting helmet
to give a quieter ride and prevent lift
at speed. This fit is achieved by making
the helmet width below the ears
slightly narrower than at the temples.
Please see our website for full fitting
guidelines and instructions on liner
removal and cleaning.
The helmet width below the ears (a) is slightly
narrower than at the temples (b)
code
Maintain a good tension on the straps to open
the aperture and keep helmet pulled apart
whilst putting on and taking off the helmet.
92
Choose Your Paintwork
Made with a fiberglass composite shell
reinforced with Kevlar
Please see our website for the full range of colourways and bespoke designs
Standard
92102
Silver
Two Tone
92104
Gloss Black
92105
Matt Black
92200
Sliver/Black
Complex
Detachable and washable fabric lining
made from a combination of black
cooling perforated weave and a mid
grey super soft velvet-like pile
92502
EK Renegade
92220
Black/Silver
92270
Black/
White Check
Bespoke
92541
92583
Black/
White, Red/
Orange Check White/Blue
Stripe SS1
We offer a bespoke paintwork
service. This is by special order
only. The delivery time is
sometimes longer. The paintwork
examples shown are designs we
have produced as requested by
some of our customers.
THE NINETY TWO IS AVAILABLE IN OUR FULL RANGE OF COLOURWAYS.
THESE ARE JUST A REPRESENTATION. IMAGES SHOWN ABOVE MAY NOT
BE A NINETY TWO HELMET.
The Davida Ninety Two
Double D Ring Fastening
British Safety Standard
BS 6658: 1985 Type B certified.
Lightweight fiberglass composite shell reinforced
with Kevlar.
Polystyrene shock absorption liner.
Detachable and washable fabric lining.
Goggle strap retainer.
Ninety Two Visor
Bob Health polycarbonate wrap around
visor with 5 press studs to fit Davida
Ninety Two with 5 studs.
64103 Clear
Available in all the Davida styles as standard as well
as a bespoke service.
Available in 2 Helmet sizes: Small 54-56 – Medium 56-58.
At Davida we have been defining quality in our own way
for more than thirty years. A genuine and relentless pursuit
rewarded with a worldwide reputation for the quietest,
most comfortable and well made helmets available.
Studs Optional studs for visor/peak
(request when ordering).
Universal Facemask
24070 Black
24071 Brown
We design and manufacture all our helmets at the Davida workshops near Liverpool in
England. Our design engineers work hand in hand with our team of technicians to constantly
improve quality and performance. Each helmet is individually hand built to precise standards
with the manufacturing procedure carefully regulated.
Inspired by our own love of motorcycles we continue to produce our unique and highly
distinctive range of hand built, leather lined open face helmets with classic lines and shapes
that capture the spirit of motorcycling-adventure and freedom.
madeat Davida
Our distinctive range of designs and traditional colours are inspired by the racers and street
cultures of the past. Each helmet is individually hand masked and decaled to create each
colourway or if desired we offer a bespoke service.
The Davida Speedster, highly evocative of the
helmets from the early 1970’s, benefits from
Davida’s well-known reputation for quality,
hand-built products using modern materials.
Weighing approx. 1000 grams, the Speedster
is a lightweight, small-profile helmet that is
quiet and comfortable.
The Davida Speedster does not conform
to any current helmet safety standard.
code
90
Helmet Sizes:
54-56cm
56-58cm
58-60cm
To select correct size helmet, simply measure the full circumference
of the head above the ears and around the forehead.
Choose Your Paintwork
Standard
90102
Silver
90104
Gloss Black
90105
Matt Black
90113
Cream,
Black Leather
90220
Black/Silver
90221
Black/White
90270
Black/
White Check
90500
90501
Mashed Green Confederate
90502
EK Renegade
90503
Sliver/
Black Tribal
Two Tone
90200
Sliver/Black
Complex
Speedster Visor
Wrap around polycarbonate visor with
5 studs. Fits Davida Speedster
with 5 studs.
90090 Clear
90504
Mashed
Matt Black
90510
Black/Silver
Thunderbolt
90530
Union Jack
The Davida Speedster
Fibreglass composite shell.
Polystyrene shock absorption liner.
Full leather lining throughout
and satin crown.
Goggle strap retainer.
Available in all the Davida Styles as
standard as well as bespoke service.
Available in 3 helmet sizes.
90531
Stars and
Stripes
90532
90533
Black/
Black/
Orange Flames Silver Flames
90541
90801
Black/
Silver Pinstripe
Orange Check
Bespoke
We offer a bespoke paintwork service. This is by special
order only. The delivery time is sometimes longer.
Examples shown are just a few of the designs we have
produced for customers.
Please see our website for the full range of colourways and bespoke designs.
THE COLOURWAYS SHOWN ARE A REPRESENTATION OF OUR DESIGNS AND THE IMAGES
SHOWN ABOVE MAY NOT BE A SPEEDSTER HELMET.
At Davida we have been defining quality in our own way
for more than thirty years. A genuine and relentless pursuit
rewarded with a worldwide reputation for the quietest,
most comfortable and well made helmets available.
Studs Optional studs for visor/peak
(request when ordering).
Approved to
Safety Standard
We design and manufacture all our helmets at the Davida workshops near Liverpool in England.
Our design engineers work hand in hand with our team of technicians to constantly improve quality
and performance. Each helmet is individually hand built to precise standards with the manufacturing
procedure carefully regulated. Our modern JET helmets maintain the highest standards of quality
control required by the American DOT 218 safety standard certification. All our open face helmets
have a fibreglass composite shell and a leather lined interior throughout.
Inspired by our own love of motorcycles we continue to produce our unique and highly
distinctive range of hand built, leather lined open face helmets with classic lines and shapes
that capture the spirit of motorcycling-adventure and freedom.
madeat Davida
Our distinctive range of designs and traditional colours are inspired by the racers and street
cultures of the past. Each helmet is individually hand masked and decaled to create each
colourway or if desired we offer a bespoke service.
Universal Facemask
24070 Black
24071 Brown
The Davida Classic Jet is the original jet
helmet developed by Davida to integrate
superior fitting, traditional styles and
manufacturing into a modern safety product
that meets the latest American DOT 218
safety standard.
code
24
Helmet Sizes:
54cm
56cm
60cm
62cm
58cm
To select correct size helmet, simply measure the full circumference
of the head above the ears and around the forehead.
Choose Your Paintwork
Standard
24102
Silver
24104
Gloss Black
24105
Matt Black
24270
Black/Check
24290
Red/White/
Green
24113
Cream/
Black Leather
24513
Cream/
Brown Leather
Two Tone
24220
Black/Silver
Classic Jet Visor
Wrap around polycarbonate visor with
5 studs. Fits Davida Classic Jet
with 5 studs.
24090 Clear
Bespoke
We offer a bespoke paintwork service. This is by special
order only. The delivery time is sometimes longer.
Examples shown are just a few of the designs we have
produced for customers.
Please see our website for the full range of colourways and bespoke designs.
THE COLOURWAYS SHOWN ARE A REPRESENTATION OF OUR DESIGNS AND THE IMAGES
SHOWN ABOVE MAY NOT BE A CLASSIC JET HELMET.
The Davida Jet
American DOT 218 Safety Standard certified.
Fibreglass composite shell.
Superior quilted leather lined interior
and satin crown.
Goggle retainer.
Available in all the Davida styles as
standard as well as bespoke service.
Cassandra, Liverpool, 2005.
Photograph © Part B
At Davida we have been defining quality in our own way
for more than thirty years. A genuine and relentless pursuit
rewarded with a worldwide reputation for the quietest,
most comfortable and well made helmets available.
The Davida Classic does not
conform to any current helmet
safety standards.
Classic Facemask
60070 Black
60071 Brown
We design and manufacture all our helmets at the Davida workshops near Liverpool in
England. Our design engineers work hand in hand with our team of technicians to constantly
improve quality and performance. Each helmet is individually hand built to precise standards
with the manufacturing procedure carefully regulated.
Inspired by our own love of motorcycles we continue to produce our unique and highly
distinctive range of hand built, leather lined open face helmets with classic lines and shapes
that capture the spirit of motorcycling-adventure and freedom.
madeat Davida
Our distinctive range of designs and traditional colours are inspired by the racers and street
cultures of the past. Each helmet is individually hand masked and decaled to create each
colourway or if desired we offer a bespoke service.
The Davida Classic retains all the original
features of the low dome racing helmet and
is an authentic example of the first helmet
especially manufactured for motorcycle racing
in the 1950’s.
code
60
Helmet Sizes:
54-58cm
58-61cm
61-64cm
To select correct size helmet, simply measure the full circumference
of the head above the ears and around the forehead.
Choose Your Paintwork
Standard
60102
Silver
Bespoke
60104
Gloss Black
60105
Matt Black
60113
Cream,
Black Leather
60513
Cream,
Brown Leather
Two Tone
60200
Sliver/Black
We offer a bespoke
paintwork service.
This is by special order
only. The delivery time
is sometimes longer.
Example shown is one
of the designs we have
produced for a customer.
Complex
60220
Black/Silver
60221
Black/White
60270
Black/
White Check
60290
Red/White/
Green
60532
60533
Black/
Black/
Orange Flames Silver Flames
60501
Confederate
60502
Renegade
60504
Matt Black
Mashed
60510
Black/Silver
Thunderbolt
60530
Union Jack
60535
Union Jack
Mono
60704
Ralph Bryans
60705
John Cooper
60706
Geoff Duke
60707
Esso
Gunnerson
60712
Tommy Robb
60713
Heinz Rosner
60714
Luigi Taveri
60715
Peter Williams
Complex
Optional Peak
Not detachable. By Special Order.
60080
The Davida Classic
60500
Mashed
Racing Series
Leather Interior with adjustable two tier
cotton webbed harness.
Internal harness and leather neck curtain
is lock stitched to full circumference of
the shell.
60102
Jim Redman
60701
Hugh
Anderson
60702
60703
John Blanchard Rob Bron
60708
Eric Hinton
60709
Umberto
Masetti
60710
Marti
Personen
Fibreglass composite shell - Hand sculpted
to retain classic dome shape of the original
helmets of the 1950’s.
Quilted neck curtain, finely tailored,
and lined with brushed cotton.
Secured with studs and webbing with
double D ring.
Goggle strap retainer.
60711
Ray Pickrell
Please see our website for the full range of colourways and bespoke designs.
Ed and Tamara, Amsterdam, July 2006. © Ben Part
Davida Mk1 Leathers
– Black Leathers that fit well and look good.
Mk 1 Jacket
Made from a smooth, soft and supple leather
– with strong zips and studs, clean classic lines,
minimal fuss and maximum comfort. Mandarin
collar, slightly raised and lightly padded around
the nape, fixed with 2 studs – Original YKK
aluminium zips – 15mm zipped sleeves at
cuffs – Two outside zipped hand pockets
– One outside zipped chest pocket
– Fully quilted liner for warmth.
440300 Ladies 440100 Mens
Designed to be supremely comfortable and functional
both on and off the bike – shorter at the front and
longer at the back and with enough arm length
to give a practical fit in the riding position.
Over the years there has been
almost as many variations on the
black leather as there are individual
motorcyclists, with every rider
having at least one, but their
essential appeal and simplicity
remains the same. As with our
helmets, we have taken great
care to design and manufacture
our black leathers so they fit well
and look iconic in their own right.
Made from a smooth, soft and subtle
leather with strong zips and studs,
clean lines, minimal fuss and
maximum comfort.
Mk1 Jacket – Mandarin collar fixed with 2 studs
Mens Mk1 Jeans – 6 belt loops on waistband,
fastened with strong hook and eye and one stud
code
44
Sizing Charts
Woman’s Mk1 Jacket
Actual Chest (cm)
Actual Chest (inch)
Size UK
Size US
Size Euro
90
35.5
8
6
36
94
37
10
8
38
98
38.5
12
10
40
102
40
14
12
42
106
42
16
14
44
110
43.5
18
16
46
90
35.5
36
46
94
37
38
48
98
38.5
40
50
102
40
42
52
106
42
44
54
110
43.5
46
56
68.5
27
33
8
6
36
74
29
34
10
8
38
79
31
34
12
10
40
84
33
35
14
12
42
89
35
35
16
14
44
93.5
37
36
18
16
46
76
30
35
30
40
81
32
35
32
42
86.5
34
36
34
44
91.5
36
36
36
46
96.5
38
37
38
48
101.5
40
37.5
40
50
Men’s Mk1 Jacket
Actual Chest (cm)
Actual Chest (inch)
Size UK/US
Size Euro
114
45
48
58
118
46.5
50
60
122
48
52
62
126
49.5
54
64
130
51
56
66
Woman’s Mk1 Jeans
Actual Waist (cm)
Actual Waist (inch)
Inseam (inch)
Size UK
Size US
Size Euro
Men’s Mk1 Jeans
Actual Waist (cm)
Actual Waist (inch)
Inseam (inch)
Size UK/US
Size Euro
107
42
38
42
52
Mk 1 Jeans
Made from a super soft leather – with strong zips and studs, clean classic lines, minimal fuss and
maximum comfort.
440400 Ladies Mk 1 Jeans Single stitched
seams – Original YKK front zip in black – No belt
loops on waistband – Waistband fastened by
concealed hook & eye and Velcro. No rear
pockets for bottom streamlining – Two horizontal
front pockets – Extra long leg length to cut
and fit– 3⁄4 length leg lining.
440200 Mens Mk 1 Jeans Made from super
soft leather and styled on the original 5 pocket
jean – Double stitched seams – Original YKK
aluminium zip in bronze – Six belt loops on
waistband – Waistband fastened with one hook
& eye and one stud – Two rear pockets – Two
front pockets, one with coin pocket – 23 inch
boot cut leg – Extra long leg length to cut and
fit – 3⁄4 length leg lining.
Ladies Mk1 Jeans
By eliminating side and rear pockets as well
as waistband belt loops – using a minimum
number of flat seams – adding a thoughtfully
designed waistband ensures the super soft
leather can stretch around feminine curves
to give a sleeker, shapelier silhouette.
Stuart, Liverpool, 2007. © Brian Maher
74
Davida 74 WRS Kit
code
The Davida WRS Mk1 Riding Glasses Kit
combines the best features of aerodynamic styledsunglasses with motorcycle riding glasses. The WRS
Mk1 Kit contains both an elasticated headband for
riding glasses use as well as arms to convert the
frames into sunglasses. A full range of spare parts
is available to cover all eventualities. Made from
lightweight and flexible TR90, WRS Mk1’s are not
easily broken.
TR90 is a stronger and more flexible material
than polycarbonate, allowing them to mould into
a comfortable and aerodynamic shape, giving an
exceptionally close and wind resistant fit without
creating uncomfortable pressure points across the
nose-bridge or temples.
The Davida WRS can be converted into
spectacles with prescription lenses or enhanced with
photochromatic lenses. Please see www.davida.co.uk
for up-to-date information on these options.
Optical
74001 – 74 WRS Mk1 Black Davida Kit
Supplied with detachable arms, elastic headband,
smoke lens fitted, and an additional pair of clear
and yellow lenses, and a protective case.
Replacement Lenses
Replacement Parts
74101
74104
74109
74111
Clear
Orange
Lens carrier
74102
74105
74110
Smoke
(Grey)
Green
74103
74106
Yellow
Smoke
(Brown)
Replacement
arms
with black
Davida Logo
Replacement
arms
with red
Davida Logo
www.davida.co.uk
Ordering and information contact:
Davida (UK) Ltd. 4-6 Pilgrim Street, Birkenhead, Merseyside, England CH41 5EH
tel +44 (0)151 647 2419 fax +44 (0)151 649 9611 email sales@davida.co.uk
See our website for a full range of products and the location of distributors and dealers worldwide.
74115
Replacement
elastic strap
Goggles – Classic Styles and Modern Materials
Our range of goggles has been carefully chosen to complement the classic shapes and designs of our helmets. Davida are
committed to the manufacture of high quality products using traditional methods, materials and styles. The range of goggles
that we supply to complement our helmets are selected with the same criteria in mind.
Retro Standard
Retro Pilot
Aviator Retro Pilot has been specifically designed by Jeantet for use with Jet helmets.
Close collaboration with Davida during the design process ensures an excellent fitting.
This goggle creates a distinctive look with any of the Davida open face helmets.
67001 Retro Standard Gunmetal
Padded with black anti-allergic and waterproof,
natural pneumatic rubber providing a firm contact
area and airtight waterproof seal. Supplied with
clear polycarbonate lens, two sets of acetate lens
in smoke and yellow, and carrying case.
All Pilot Goggles supplied with protective bag and fitted with clear lens. Optional Silver
Mirror Lens shown.
Aviator Pilot T1
Black goats leather with deep foam padding.
Rolled brass lens frame finished in either chrome,
or gold. Curved body and frame for wide peripheral
vision. Adjustable elastic headband with metal
clasp. Supplied with clear lens and protective bag.
Replacement lens available in smoke, yellow,
silver mirror or blue mirror.
670762 Aviator Pilot T2
Black goats leather with deep foam padding with
cut out sections for spectacles and sunglasses.
Rolled brass lens frame finished in chrome.
Curved body and frame for wide peripheral
vision. Adjustable elastic headband with metal
clasp. Supplied with clear lens and protective bag
Replacement lens available in smoke, yellow,
silver mirror or blue mirror.
Aviator Pilot T3
The same frame as the T1 & T2 goggles with
reduced padding so more suitable for slightly
smaller helmet apertures and head sizes.
67041 Retro Standard Mousse Gunmetal
Padded with 15mm wide black anti-allergic,
waterproof foam rubber providing a soft, flat
contact and air tight seal. Supplied with clear
polycarbonate lens, two sets of acetate lens
in smoke and yellow and, carrying case.
Styles and Lenses
67001 Retro Standard
Gunmetal
67002 Retro Standard
Chrome
67003 R
Gold
67062 Retro Std Cuir
Chrome/Black Mask
67063 Retro Std Cuir Mask
Black Chrome/Black Mask
67064 R
Chrome/
Nylsun
Styles and Lenses
670722 Pilot T1 Gunmetal
670723 Pilot T3 Gunmetal
67173
Replacement Lens T1, T2 & T3
Yellow
670732 Pilot T1 Chrome
670733 Pilot T3 Chrome
67174
Replacement Lens T1, T2 & T3
Smoke
670742 Pilot T1 Gold
670743 Pilot T3 Gold
67175
Replacement Lens T1, T2 & T3
Silver Mirror
67172
Replacement Lens T1, T2 & T3
Clear
67176
Replacement Lens T1, T2 & T3
Blue Mirror
Replacement Lenses
67181 Replacement Lens
Clear
67182 Replacement Lens
Smoke
Our range of goggles has been carefully chosen to
complement the classic shapes and designs of our helmets.
Davida are committed to the manufacture of high quality
products using traditional methods, materials and styles.
The range of goggles that we supply to complement our
helmets are selected with the same criteria in mind.
Aviator Goggles by Leon Jeantet
We share with Jeantet a commitment to excellence in the
manufacture of quality, hand-built products using traditional
materials and styles. Aviator goggles are available in a wide
range of styles to suit your personal preference and are
an ideal compliment to the Davida range of helmets.
Worn together, the two products create a variety of effective
and distinctive combinations.
code
67
Aviator Retro Standard provides an ideal complement to the Davida Classic, featuring a highly
versatile adjustable nose bridge (except Cuir Mask). The unique design ensures a comfortable,
individual fit with an effective airtight seal. The sliding mechanism widens the nose bridge
by an extra 1-10mm allowing frames to sit neatly around the eye sockets. A pivoting joint
between the nose bridge and the frame allows the goggle to follow the curvature of the face.
Shaped to give maximum peripheral vision, all Retro Standard frames are manufactured
in polished rolled brass and coated in a variety of finishes. All Retro Standard Goggles are
supplied with clear polycarbonate lens, two sets of acetate lens in smoke and yellow,
and carrying case.
Retro Special
67062 Retro Standard Cuir Chrome
Padded with 12mm wide soft black leather, foam
filled, hand-stitched and treated for water resistance
giving a comfortable airtight seal. Supplied with
clear polycarbonate lens, two sets of acetate lens
in smoke and yellow, and carrying case.
67031 Retro Special Optical Gunmetal
Padded with black anti-allergic and waterproof,
natural pneumatic rubber providing a firm contact
area and airtight waterproof seal. Supplied with
clear polycarbonate lens, two sets of acetate lens in
smoke and yellow, and carrying case. Incorporates
an internal rim to allow fitment of prescription
lenses. A standard template, as required by the
optician, is included.
67065 Retro Standard Cuir Mask
Chrome/Brown Mask
Padded with a one piece, 12mm foam filled, hand
stitched, soft leather mask. Treated for water resistance
it proves a flexible fit and effective airtight seal.
Supplied with clear polycarbonate lens, two sets of
acetate lens in smoke and yellow, and carrying case.
Retro Standard
67007 Retro Standard
Matt Black
Retro Std Cuir Mask
/Black Mask
67065 Retro Std Cuir Mask
Chrome/Brown Mask
67071 Retro Special Gunmetal
Padded with black anti-allergic natural rubber
providing a firm contact area and airtight
waterproof seal. Supplied with blue mirror
polycarbonate lens, two sets of acetate lens
in smoke and yellow, and carrying case.
67041 Retro Std Mousse
Gunmetal
67080 Super Nylsun Kit
Aerodynamically shaped, one piece black frames
made of flexible moulded plastic with pop-out
curved polycarbonate lenses. Provides an
exceptionally good fit with Jet helmets.
Supplied with smoke lenses fitted and additional
set of clear and yellow lenses.
67081 Super Nylsun Clear
67082 Super Nylsun Smoke
67083 Super Nylsun Yellow
67183 Replacement Lens
Yellow
Styles and Lenses
67031
Retro Special Optical
Gunmetal
Clasp feature on optical models
allows simple lens changing.
67032
Retro Special Optical
Chrome
Ring clip feature on Retro
Special models allows
headband replacement.
67071
Retro Special
Gunmetal
67200
Retro Special Optical
Template
Esso Gunnerson, 1960’s. Photograph © Davida Archive
Goggles – Classic Styles and Modern Materials
Our range of goggles has been carefully chosen to complement the classic shapes and designs
of our helmets. Davida are committed to the manufacture of high quality products using traditional
methods, materials and styles. The range of goggles that we supply to complement our helmets
are selected with the same criteria in mind.
65
code
Climax have been manufacturing goggles in Spain since the end of the Second World War. The Climax 500 model was especially designed in the
1960’s for the motorcyclist as an alternative to the very popular Octopus goggle used extensively by racers during the 1950’s and 60’s.
Chrome plated metal frames.
Triplex curved glass lens. Except 521 which is spilt lens.
Non adjustable nose bridge.
One piece foam padded black leather eye pads.
Adjustable headband made of rustproof springs inside soft nylon sleeve.
Climax 500
65500 Climax 500
Pear shaped frame and curved lens providing
wide peripheral vision. Black Leather foam filled
padded mask.
Climax 510
Climax 521
65510 Climax 510
65521 Climax 521
Square shaped frames and curved triplex glass lens.
Foam filled padded face mask in black leather.
Designed for use over spectacle frames, using thicker
foam padding and an additional plastic section between
the frames and black leather face mask.
Interior face mask across nose bridge has a cut away
section to provide gap for small framed spectacles
to prevent focal distortion and pressure points.
Replacement Lenses
Split triplex glass lens provide a wide peripheral vision.
Replacement Headbands
65622 500 Clear
65623 500 Smoke
65600 500 Black
65620 510 Clear
65621 510 Smoke
65605 510 Black
65612 521 Clear
65613 521 Smoke
65608 521 Black
Ordering and information contact: Davida (UK) Ltd. 4-6 Pilgrim Street, Birkenhead, Merseyside, England CH41 5EH
Tel: +44 (0)151 647 2419 Fax: +44 (0)151 649 9611 Email: sales@davida.co.uk
See our website www.davida.co.uk for full range of products and location of distributors and dealers worldwide.
Goggles – Classic Styles and Modern Materials
Our range of goggles has been carefully chosen to complement the classic shapes and designs of our helmets. Davida are
committed to the manufacture of high quality products using traditional methods, materials and styles. The range of goggles
that we supply to complement our helmets are selected with the same criteria in mind.
Manufactured in the UK and based on the original RAF flying goggle of the 1940’s, the Halcyon Goggle is a popular choice for use with all styles
of open face helmets. Halcyon frames are made from brass. They are either chrome plated or painted in a variety of finishes and hand stitched
to a one piece padded leather or PVC Face Mask. (except Mk6 which does not have a nose section). Most prescription lenses can be be
accommodated within the Halcyon lens frame.
Halcyon Goggles
Frames have aerators stamped into top and bottom.
One piece foam padded face masks in PVC or leather.
Adjustable screw or sliding nose bridge.
Removable and adjustable colour co-ordinated headband.
Replacement polycarbonate lenses available.
Mk 4
61001 Halcyon Mk 4 Silver Cross
Adjustable Sliding Nose Bridge.
Black Leather face mask fully padded around eyes and across nose piece.
Split polycarbonate lens.
Mk 6
Adjustable Sliding Nose Bridge.
PVC Eye Pads without nose piece.
Curved Polycarbonate Lens.
Mk 7
Adjustable Sliding Nose Bridge.
One piece PVC Mask.
Curved polycarbonate lens.
61019 Rider Silver Frame/Black PVC Eye Pads/Curved Polycarbonate Lens
61022 Rider Silver Frame/Black PVC Mask/Curved lens
61020 Racing Black Frame/Black PVC Eye Pads/Curved Polycarbonate Lens
61023 Racing Black Frame/Black PVC Mask/Curved Lens
61021 Deluxe Chrome Frame/Black PVC Eye Pads/Curved Polycarbonate Lens
61024 Deluxe Chrome Frame/Black PVC Mask/Curved Lens
Replacement Headbands
61105 White
61106 Black
61107 Brown
61
code
Mk 8
Mk 9
Adjustable Sliding Nose Bridge.
One piece PVC Face Mask, except RAF Replica which is leather.
Split Polycarbonate Lens.
Adjustable Screw Nose Bridge.
One Piece PVC Mask, except Vintage which is leather.
Split Polycarbonate Lens.
61003 Service Silver Frame/Brown PVC Mask/Spilt Polycarbonate Lens
61007 Super Jet Silver Frame/Brown PVC Mask/Split Polycarbonate Lens
61004 Rider Silver Frame/Black PVC Mask/Split Polycarbonate Lens
61008 Rider Silver Frame/Black PVC Mask/Split Polycarbonate Lens
61005 Racing Black Frame/Black PVC Mask/Split Polycarbonate Lens
61009 Racing Black Frame/Black PVC Mask/Split Polycarbonate Lens
61006 Deluxe Chrome Frame/Black PVC Mask/Split Polycarbonate Lens
61010 Vintage Silver Frame/Brown Leather Mask/Split Polycarbonate Lens
61018 RAF Replica Grey Frame/Brown Leather/Split polycarbonate Lens
61017 Deluxe Chrome Frame/Black PVC Mask/Split Polycarbonate Lens
Mk 10
Mk 49
Adjustable Screw Nose Bridge.
One piece PVC Mask.
Curved Polycarbonate lens.
Adjustable Screw Nose Bridge.
Leather face mask.
Split polycarbonate lens.
61025 Rider Silver Frame/Black PVC Mask/Curved Lens
61011 Antique Black Gold Frames/Black Leather Face Mask/Split Polycarbonate Lens
61026 Racing Black Frame/Black PVC Mask/Curved Lens
61012 Antique Brown Gold Frames/Brown Leather Face Mask/Split Polycarbonate Lens
61027 Deluxe Chrome Frame/Black PVC Mask/Curved Lens
61013 Red Chrome Frames/Red Leather Face Mask/Split Polycarbonate Lens
61014 White Chrome Frames/White Leather Face Mask/Split Polycarbonate Lens
61016 Black Black Frames/Black Leather Face Mask/Split Polycarbonate Lens
Replacement Lenses
Polycarbonate Curved Lens Mk 6/7/10
Polycarbonate Spilt Lens Mk 4/8/9/49
61109 Smoke
61101 Smoke
61108 Clear
61100 Clear
www.davida.co.uk
Ordering and information contact:
Davida (UK) Ltd.
4-6 Pilgrim Street,
Birkenhead, Merseyside,
England CH41 5EH
Tel: +44 (0)151 647 2419
Fax: +44 (0)151 649 9611
Email: sales@davida.co.uk
See our website for a full range of
products and the location of distributors
and dealers worldwide.