AD-235
Parts Manual
(for models mfd. between 1989 and 1991)
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
www.amdry.com
ADC Part No. 450117 - 6
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included
with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet appareil
ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to
make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________________________________
AD-235
MODEL NO. ______________
RESELLER’S NAME _________________________________________________________________________________
Serial Number(s) _____________________________________________________________________________________
____________________________________________________________________________________________________
____________________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department
at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part
number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.
Table of Contents
Control Door Assembly ............................................................................................................................................... 4
Lower Service Door Assembly ..................................................................................................................................... 5
Coin Microprocessor Control Panel / Box Assemblies ................................................................................................ 6
Front Panel Assembly ................................................................................................................................................. 8
N.S. Series Main Door Switch Assembly .................................................................................................................... 9
Main Door Assembly ................................................................................................................................................. 10
Lint Drawer Assembly ............................................................................................................................................... 11
Tumbler / Support Assemblies .................................................................................................................................. 12
Sensor Bracket Assembly ........................................................................................................................................ 14
Idler Bearing Assembly ............................................................................................................................................. 15
Tumbler Bearing Assembly ....................................................................................................................................... 16
Totally Enclosed, Fan-Cooled Motor Mount Assembly .............................................................................................. 18
Direct Spark Ignition Gas Valve / Burner Assembly ................................................................................................... 20
Gas Piping Assembly ............................................................................................................................................... 22
Sail Switch Assembly ............................................................................................................................................... 23
Gas Burner Chamber Assembly ................................................................................................................................ 24
Exhaust Ducting Assembly ....................................................................................................................................... 25
Back Guard Assembly .............................................................................................................................................. 26
Microprocessor Coin Acceptor Listing ....................................................................................................................... 27
Additional Parts Available ......................................................................................................................................... 28
Control Door Assembly
Illus. No.
Part No.
Qty.
1*
880249
1
2
3
4
5
6
7
8
9
180313
150201
160040
160140
112077
180305
150201
117604
1
5
1
1
2
1
5
3
*
4
Description
Control Door Assembly Complete without Lock
(includes illus. nos. 1 through 3 and 7 through 9)
Lower Black Trim Strip (28-3/8” length)
#10-32 x 1/4” Phillips Round Head Machine Screw
ACE® Lock Assembly ONLY without Key
ACE® Key ONLY (key no. XX4451)
“Arrow” Label
Upper Black Trim Strip (28-3/8” length)
#10-32 x 1/4” Phillips Round Head Machine Screw
Neoprene Sponge Tape (sold by the foot)
Specify color when ordering.
American Dryer Corporation
450117 - 6
Lower Service Door Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7*
160001
160103
160016
180305
150201
117604
180313
880260
1
1
1
1
5
3
1
1
8
150201
5
*
Description
AD-100 Lock Assembly ONLY with Key
AD-100 Key ONLY
1-1/4” Lock Cam ONLY
Upper Black Trim Strip (28-3/8” length)
#10-32 x 1/4” Phillips Round Head Machine Screw
Neoprene Sponge Tape (sold by the foot)
Lower Black Trim Strip (28-3/8” length)
Lower Service Door Assembly Complete Less Lock
(includes illus. nos. 3 through 8)
#10-32 x 1/4” Phillips Round Head Machine Screw
Specify color when ordering.
450117 - 6
www.amdry.com
5
Coin Microprocessor Control Panel / Box Assemblies
NOTE: Duplicate all components on right hand side of control panel / box.
Illus. No.
Part No.
Qty.
1
2
112526
800157
1
1
800103
1
802142
1
802143
1
160042
160043
160022
160112
160113
1
1
1
1
1
3
4*
5*
6
Description
Coin Keypad Label Assembly
Phase 4.1 Control Panel Assembly
(includes illus. nos. 1, 2, 10, 11, and 12)
Phase 4.1 Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 10, 11, and 12)
Standard Coin Box Assembly Complete
(includes illus. nos. 5 through 7)
High Security Coin Box Assembly Complete
(includes illus. nos. 5 through 7)
ACE® Standard Coin Box Lock Assembly with Key
ACE® High Security Coin Box Lock Assembly with Key
High Security Coin Box Lock Assembly with Key
Key (for standard coin box lock)
Key (for high security coin box lock)
American Dryer Corporation
450117 - 6
Coin Microprocessor Control Panel / Box Assemblies
Illus. No.
Part No.
Qty.
6
––––––
1
7
8**
137056
137021
112800
137023***
865050
865051
153012
137130
137031
152001
137021
137020
137022
150315
136151
136057
137013
800196
9
10
11
12
13
14
15
16
17
18****
19
20
21
22
23
24
25
26
27
28*****
29
*
**
***
****
*****
150300
141403
150002
120715
151000
151001
802142
802143
153018
152014
152002*****
1
3
1
1
1
1
4
1
1
4
15
1
1
1
1
***
4
1
2
1
2
1
2
6
1
1
4
4
4
Description
Microprocessor Coin Acceptor
(refer to Microprocessor Coin Acceptor Listing on page 27)
Optical Switch ONLY (Greenwald)
Microprocessor Socket ONLY
Microprocessor (female) Pin Extraction Tool
Optical Switch Connector ONLY
Single Coin Optic Switch Harness ONLY
Dual Coin Optic Switch Harness ONLY
#8 Star Washer
Phase 4.1 Coin Microprocessor Controller (computer) ONLY
Phase 4.1 Coin Microprocessor Controller (computer) ONLY with Battery Clip
#8-32 Hex Nut
Microprocessor Socket ONLY
15-Pin Microprocessor Connector ONLY
15-Pin Strain Relief
#6 x 3/8” Phillips Pan Head Screw
Solid State Relay Board
1/2-Amp (Slo-Blo) Fuse
Nylon Standoff
Control Panel / Box Assembly Complete for Gas Models ONLY
(includes illus. nos. 17 through 21, 24, and 25)
#10 x 1/2” Hex Washer TEK Screw
Direct Spark Ignition Transformer – 24 VAC
#6-32 x 1” Phillips Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
#8-32 Pal Nut
Standard Coin Vault ONLY
High Security Coin Vault ONLY
1/4” Flat Washer
1/4-20 Free Spin Washnut
1/4” Hex Nut
Specify key number when ordering.
Quantity is 3 or 6.
Quantity is 1 or 2.
Check fuse rating for verification.
For use on high security coin vault ONLY.
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
450117 - 6
www.amdry.com
7
Front Panel Assembly
Illus. No.
Part No.
Qty.
1*
800692
1
2
3
4
5
6
7
154215
170330
150309
121405
150201
––––––
2
1
8
1
2
1
8
112350
870011
150300
1
1
1
9
*
8
Description
Right Hand Insulated Front Panel Assembly
(includes illus. nos. 1, 2, 3, and 6)
1/8” Pop Rivet
Friction Door Catch
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Rubber Grommet
#10-16 x 1/2” Phillips Pan Head Machine Screw
N.S. Series Main Door Switch
(refer to N.S. Series Main Door Switch Assembly on page 9)
ADC Logo ONLY
Logo Double Tape Kit
#10 x 1/2” Hex Washer TEK Screw
Specify color when ordering.
American Dryer Corporation
450117 - 6
N.S. Series Main Door Switch Assembly
Illus. No.
Part No.
Qty.
1
2
313215
800445
1
1
3
4
5
6
7
313217
150025
153045
137003
153045
152016
1
2
2
2
2
2
450117 - 6
Description
Door Switch Actuator Arm
N.S. Series Main Door Switch Assembly Complete
(includes illus. nos. 1 through 7)
Main Door Switch Housing
#4-40 x 1” Phillips Pan Head Machine Screw
#4 Lock Washer
N.S. Series Main Door Switch
#4 Lock Washer
#4-40 Hex Nut
www.amdry.com
9
Main Door Assembly
Illus. No.
Part No.
Qty.
1
881422
1
2
3
4
5
6
800448
150410
152014
102349
102212
170730
170319
150448
150431
1
4
4
1
1
1
4
4
1
7
8
9
10
Description
Black Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
12-1/2” Stainless Steel Main Door Hinge Assembly
#10-24 x 3/8” Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Main Door Gasket
20-7/16” Door Glass with 4 Holes
Main Door Glass Adhesive (10.3 oz. cartridge)
1/2” Stainless Steel Flat Head Allen Screw
Door Glass (nylon) Spacer
Main Door Latch Screw (#10 x 7/16” dome hex head screw)
American Dryer Corporation
450117 - 6
Lint Drawer Assembly
Illus. No.
Part No.
Qty.
1
2
3
850667
112040
112530
1
1
1
450117 - 6
Description
Lint Drawer Assembly
“Clean Lint Screen” Label
“Coin Program Location Summary” Label
www.amdry.com
11
Tumbler / Support Assemblies
12
American Dryer Corporation
450117 - 6
Tumbler / Support Assemblies
Illus. No.
Part No.
Qty.
1
800831
1
800721*
1
800891
1
800841*
1
301315
301316
301414
301415
150518
100915
153004
154210
800617
152005
153005
153004
116003
401010
2
1
2
1
1
3
3
30
1
3
3
3
1
1
2
3
4
5
6
7
8
9
10
11
*
Description
Tumbler and Support Assembly Complete with Felt Collar
(includes illus. nos. 1 through 11)
Tumbler ONLY
(includes illus. nos. 1, 2, and 6)
Stainless Steel Tumbler and Support Assembly Complete with Felt Collar
(includes illus. nos. 1 through 11)
Stainless Steel Tumbler ONLY
(includes illus. nos. 1, 2, and 6)
Short Tumbler Rib
Tall Tumbler Rib
Stainless Steel Short Tumbler Rib
Stainless Steel Tall Tumbler Rib
5/16-18 x 3/8” Socket Button Head Screw
3/8-16 x 31” Tie Rod
3/8” Flat Washer
5/32” x 3/16” Pop Rivet
Tumbler Support
3/8-16 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Felt Collar
#847 Adhesive for Felt Collar (5 oz. tube)
Felt collar is not included and must be ordered separately.
450117 - 6
www.amdry.com
13
Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1
880251
1
2
3
4
5
6
122605
122701
122801
154007
150000
801428
1
4
1
2
2
1
7
8
9
10
11
12
305107
130103
153010
152000
150301
122604
122700
1
1
2
2
2
1
4
14
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 through 4)
4-Pin Socket Connector
Socket Terminal
Pin / Socket Extraction Tool
1/4” Tinnerman Push-On Fastener
#6-32 x 1/4” Slotted Round Head Machine Screw
Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 9)
Temperature Sensor Bracket ONLY
225° Large Automatic Thermostat
#6 Star Washer
#6-32 Hex Nut
#8-18 x 7/16” Phillips Pan Head TEK Screw
4-Pin Connector
Pin Terminal
American Dryer Corporation
450117 - 6
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
100113
101129
154301
100100
100705
301850
150529
100214
153007
152002
150617
153005
153004
152020
152004
801010
1
1
2
1
1
1
3
2
3
3
2
2
2
1
1
1
17
18
100406
150509
––––––
1
1
–
450117 - 6
Description
4L-400 V-Belt (idler to motor)
9” x 2-1/2” Pulley with 3/16” Key
5/16-18 x 5/16” Allen Setscrew
5L-660 V-Belt (idler to tumbler)
3/16” x 3/16” x 1-3/8” Key
5/8” x 3/4” Idler Shaft
1/4-20 x 2-1/4” Carriage Bolt
5/8” Flange Bearing
1/4” Lock Washer
1/4-20 Hex Nut
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
5/16-18 Standard Square Nut
5/16-18 Hex Nut
Idler Bearing Assembly Complete
(includes illus. nos. 6 through 17)
Idler Bearing Mount ONLY
5/16-18 x 3” Hex Head Machine Bolt
Direct Spark Ignition Module Mounting Bracket
(refer to Direct Spark Ignition Gas Valve / Burner Assembly on page 20)
www.amdry.com
15
Tumbler Bearing Assembly
16
American Dryer Corporation
450117 - 6
Tumbler Bearing Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
880203
153005
152005
150501
153002
152001
150621
152004
801101
1
4
4
2
2
2
2
2
1
801103
1
801105
801104
150610
152004
150508
153005
152005
150600
880202
153004
153005
152005
100713
101100
154301
100100
1
1
2
2
2
2
2
2
1
2
2
2
1
1
2
1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
450117 - 6
Description
1-3/8” Flange Bearing with Nylock Setscrew
3/8” Lock Washer
3/8-16 Hex Nut
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 x 1-1/2” Hex Head Machine Bolt
5/16-18 Hex Nut
1-3/8” Bearing Box Assembly Complete
(includes illus. nos. 9, 10, and 13 through 20)
1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 9, 10, and 13 through 15)
1-3/8” Bearing Box ONLY
Pillow Block Bearing Support
5/16-18 x 1-1/2” Allen Setscrew
5/16-18 Hex Nut
3/8-16 x 3/4” Hex Head Machine Bolt
3/8” Lock Washer
3/8-16 Hex Nut
3/8-16 x 1-1/2” Hex Head Machine Bolt
1-3/8” Pillow Block Bearing with Nylock Setscrew
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
1/4” x 1/4” x 7/8” Key
18” Cast Pulley
5/16-18 x 5/16” Allen Setscrew
5L-660 V-Belt (tumbler to idler)
www.amdry.com
17
Totally Enclosed, Fan-Cooled Motor Mount Assembly
18
American Dryer Corporation
450117 - 6
Totally Enclosed, Fan-Cooled Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
100604
152006
153050
100702
153050
117604
850019
803967*
1
2
1
1
3
4
1
1
8
9
10
11
12*
13
14
15
16
17
18
19
150501
153002
153001
154000
100065
150501
153002
153001
153001
101131
100113
122701
122801
137030
122801
837005
837049
4
4
4
4
1
4
4
4
**
1
1
8
1
1
1
1
1
20
21
*
**
Description
12-1/2” Impellor with 1/2” Bore
1/2-20 Left Hand Jam Nut
1/2” S.A.E. Flat Washer
1/8” x 1/8” x 1-1/2” Key
1/2” S.A.E. Flat Washer
Neoprene Sponge Tape (sold by the foot)
Motor Mount ONLY
1/2 hp 100/120-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor Mount Assembly
Complete (for use on 60 Hz models Only)
(includes illus. nos. 1 through 7 and 11 through 17)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 Tinnerman Nut
1/2 hp 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor with Plug
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16” Flat Washer
1/2” x 2-1/4” Motor Pulley (for use on 60 Hz models Only)
4L-400 V-Belt (motor to idler) (for use on 60 Hz models Only)
Socket Terminal
Pin / Socket Extraction Tool
8-Pin Housing
Pin / Socket Extraction Tool
Low to High Voltage Conversion Harness (120 Volt to 230 Volt)
High to Low Voltage Conversion Harness (230 Volt to 120 Volt)
Specify voltage when ordering.
As required.
450117 - 6
www.amdry.com
19
Direct Spark Ignition Gas Valve / Burner Assembly
20
American Dryer Corporation
450117 - 6
Direct Spark Ignition Gas Valve / Burner Assembly
Illus. No.
Part No.
Qty.
1
850804
809313*
1
1
809314*
1
11
12
13
14
15
16
17
150300
881367
318650
150301
128927
140411
318650
150301
141235
140828
140811
153000
152001
141131
141109
150108
153000
880134
2
1
1
2
1
1
1
2
1
1
1
1
1
1
1
2
2
1
18
19
20
21
22
23
24
25
26
27
28
305412
880330
152001
121014
132607
121028
121014
883849
151000
801013
152014
––––––
1
1
2
1
2
1
1
1
4
1
1
–
—
874059**
1
2
3
4
5
6
7
8
9
10
*
**
Description
Direct Spark Ignition Gas Valve / Burner Tube Mounting Plate ONLY
Direct Spark Ignition (natural gas) Valve / Burner Assembly Complete Less Orifice
(includes illus. nos. 1, 3 through 9, and 11 through 23)
Direct Spark Ignition (liquid propane) Gas Valve / Burner Assembly Complete
Less Orifice
(includes illus. nos. 1, 3 through 9, and 11 through 23)
#10 x 1/2” Hex Washer TEK Screw
Angle Union Shutoff with 1/2” Tail Piece
Notched Pipe Bracket
#8-18 x 7/16” Phillips Pan Head TEK Screw
1/2” 24 VAC Direct Spark Ignition Redundant (natural gas) Valve
Direct Spark Ignition Gas Valve Liquid Propane Conversion Kit
Notched Pipe Bracket
#8-18 x 7/16” Phillips Pan Head TEK Screw
1/2” Single Port Manifold
#20 Burner Orifice (natural gas)
#41 Burner Orifice (liquid propane gas)
#8 Steel Burr
#8-32 Hex Nut
Direct Spark Ignition Up-Shot Burner Tube Assembly
Flame Spreader
#8-32 x 1/2” Slotted Pan Head Machine Screw
#8 Steel Burr
Ignitor / Flame-Probe Kit Assembly
(includes illus. nos. 18 and 19)
Direct Spark Ignition Ignitor Gap Feeler Gauge … Not Illustrated
#20 Gauge-7/28 High Voltage Connector and Wire
#8-32 Hex Nut
1/4” Insulated Terminal
#18 Gauge Red Silicone Wire (sold by the foot)
1/4” x .032 Insulated Terminal
1/4” Spade Terminal
Direct Spark Ignition Module
#6-32 Pal Nut
Direct Spark Ignition Module Mounting Bracket
1/4-20 Free Spin Wash Nut
Idler Bearing Mount
(refer to Idler Bearing Assembly on page 15)
Burner Liquid Propane Conversion Kit with Orifices
Burner orifice is not included and must be ordered separately.
Consult factory for elevations over 2,000 feet.
450117 - 6
www.amdry.com
21
Gas Piping Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
318702
150300
141236
881367
1
2
1
2
22
Description
Top Pipe Support Bracket ONLY
#10 x 1/2” Hex Washer TEK Screw
Gas Piping Manifold
Angle Union Shutoff with 1/2” Tail Piece
American Dryer Corporation
450117 - 6
Sail Switch Assembly
Illus. No.
Part No.
Qty.
1
2
150301
802800
2
1
3
4
5
6
7
8
9
10
154004
150309
802709
122200
150303
105500
319202
154002
1
2
1
1
2
1
1
1
450117 - 6
Description
#8-18 x 7/16” Phillips Pan Head TEK Screw
Sail Switch Box with Cover and Bracket
(includes illus. nos. 2, 4, and 5)
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket
Sail Switch
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (embossed)
1/8” Push-On Fastener
www.amdry.com
23
Gas Burner Chamber Assembly
Illus. No.
Part No.
Qty.
1
804025
1
2
3
4
318006
150300
802502
1
2
1
5
6
7
8
319710
150301
150001
130103
151000
1
2
2
1
2
24
Description
Gas Burner / Electric Oven Chamber Assembly
(includes illus. nos. 1, 2, and 3)
Flame Viewing Plate
#10 x 1/2” Hex Washer TEK Screw
Hi-Limit Bracket Assembly
(includes illus. nos. 4 through 8)
Hi-Limit Bracket ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/2” Phillips Round Head Machine Screw
225° Large Automatic Thermostat
#6-32 Pal Nut
American Dryer Corporation
450117 - 6
Exhaust Ducting Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
880505
143527
143539
143537
143538
143536
121104
121105
150301
315025
150300
121104
121105
150301
143536
315025
150300
117505
1
1
1
1
1
1
1
1
2
1
2
1
1
2
1
1
2
*
9
10
11
12
13
—
Description
Wye Branch Damper Assembly
6” Round x 7” Oval Straight Boot
15-1/2” x 7” Oval Duct
7” Oval x 45° Elbow
6” Round x 7” Oval Straight Boot
6” Round x 45° Elbow
Junction Box
Junction Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw … Not Illustrated
Rear Wiring Box Cover
#10 x 1/2” Hex Washer TEK Screw … Not Illustrated
Junction Box
Junction Box Cover
#8-18 x 7/16” Phillips Head TEK Screw … Not Illustrated
6” Round x 45° Elbow
Rear Wiring Box Cover
#10 x 1/2” Hex Washer TEK Screw … Not Illustrated
Aluminum Duct Tape (sold by the foot)
* As required.
450117 - 6
www.amdry.com
25
Back Guard Assembly
Illus. No.
Part No.
Qty.
Description
1
2
3
4
5
311014
150301
318702
150300
103500
2
16
1
2
4
Upper / Lower Back Guard Assembly
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Pipe Support Bracket
#10 x 1/2” Hex Washer TEK Screw
Adjustable Leveling Leg
26
American Dryer Corporation
450117 - 6
Microprocessor Coin Acceptor Listing
NOTE: Coin acceptors listed included optical switch (ADC Part No. 137056).
Single Coin*
ADC Part No.
Nation
125100
U.S. and Canada
Description
25¢ Optic Coin Acceptor
125127
Canada
125101
United Kingdom
$1 Canadian Optic Coin Acceptor
10 New Pence Optic Coin Acceptor
125114
United Kingdom
20 New Pence Optic Coin Acceptor
125115
United Kingdom
1 Pound Optic Coin Acceptor
125106
France
1 French Franc Optic Coin Acceptor
125120
France
2 French Franc Optic Coin Acceptor
125124
France
5 French Franc Optic Coin Acceptor
125109
Denmark
1 Danish Krone Optic Coin Acceptor
125125
Netherlands
125108
Australia
10¢ Australian Optic Coin Acceptor
125107
Australia
20¢ Australian Optic Coin Acceptor
125130
Australia
$1 Australian Optic Coin Acceptor
125123
New Zealand
125104
Japan
125103
—
.882 Token Optic Coin Acceptor
125121
—
.800 Token Optic Coin Acceptor
125129
—
Muller Token Optic Coin Acceptor
125132
125133
Singapore
Hong Kong
25¢ Guilder Optic Coin Acceptor
50¢ New Zealand Optic Coin Acceptor
100 Yen Optic Coin Acceptor
50¢ Singapore Optic Coin Acceptor
$1 Hong Kong Optic Coin Acceptor
Dual Coin*
*
ADC Part No.
Nation
Description
125116
U.S. and Canada
10¢ / 25¢ Dual Optic Coin Acceptor
125128
Canada
25¢ / $1 Dual Optic Coin Acceptor
125112
United Kingdom
10 / 20 Pence Dual Optic Coin Acceptor
125110
United Kingdom
10 / 50 Pence Dual Optic Coin Acceptor
125111
United Kingdom
20 / 50 Pence Dual Optic Coin Acceptor
125113
United Kingdom
1£ / 20 Pence Dual Optic Coin Acceptor
125122
France
125117
Denmark
1 / 5 Danish Krone Dual Optic Coin Acceptor
125131
Denmark
5 / 10 Danish Krone Dual Optic Coin Acceptor
125126
Netherlands
125118
125105
Singapore
Japan
2 / 5 Franc Dual Optic Coin Acceptor
25¢ / 1 Guilder Dual Optic Coin Acceptor
20¢ / 50¢ Singapore Dual Optic Coin Acceptor
50 / 100 Yen Dual Optic Coin Acceptor
Consult factory for coin acceptors not listed.
450117 - 6
www.amdry.com
27
Additional Parts Available
Part No.
Description
112039
“Black / White / Green Ground” Label
114001
“CAUTION – Exhaust / Lint Screen” Label
114006
“WARNING – Fire Hazard” Label
120100
3/8” Straight BX Connector
120300
3/8” x 45° BX Connector
120400
3/8” Red Jacket (BX Insulator)
120500
3/8” Jiffy Clip (BX Retainer Clip)
120600
3/8” Greenfield (BX)
120800
1/4” In-Line Connector
120802
Red Butt Connector
120902
#74B Wire Nut
120903
Crimp-On Wire Nut
121014
1/4” Insulated Female Terminal
121499
5-1/2” Harness Tie
121500
8” Harness Tie
121503
Harness Tie Mounting Clip
122804
Manometer (water column test gauge)
170194
Tumbler Lint Cleaning Brush
404500
Almond Brush-In-Cap Bottle Touch-Up Paint
404502
White Brush-In-Cap Bottle Touch-Up Paint
404506
Beige Brush-In-Cap Bottle Touch-Up Paint
404507
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
880200
Electric Terminal Assortment Kit
28
American Dryer Corporation
450117 - 6
Notes
450117 - 6
www.amdry.com
29
ADC Part No. 450117
6 - 09/25/08 - 0
Download PDF