PRODUCT WHITE PAPER
http://www.eliteproav.com
Saker Tab-Tension Series
Section 1: Screen Design
.
1.1 What is it?
The Saker Tab-Tension Series includes a tab-tension system with MaxWhite® Fiberglass or AcousticPro UHD
material to maintain flatness all across the projection surface.
1.2 How does it work?
Standard features include a wireless 5-12 volt trigger, IR/RF remote control package, and a detachable manual
keypad switch. It utilizes our MaxWhite® Fiberglass (FG) material which has a wide viewing angle to allow the
audience to see the image from anywhere in the room.
Section 2: Product Features
.
2.1 Characteristics
Screen Material
• 180° wide viewing angle
• Active 3D, 4K Ultra HD, and HDR Ready
• Not compatible with Ultra/Short-throw Projectors
• Standard black masking borders and black backing
• Available in the following range of diagonal sizes:
• 100" and 120" in 4:3 format
• 84" - 180" in 16:9 format
• 106" and 120" in 16:10 format
Design and Installation
• Flush hidden wall mounts allow screen to slide horizontally for proper centering
• Tab-tension design helps maintain a flat projection surface
• Curved aluminum enamel white case with parallel grooves
• Extra top black masking border for high ceiling installations
• Plug & Play ready, no hardwire installation required
• Mounting hardware kit included for wall or ceiling installation
Control System
• Internal Radio Frequency/Infrared receivers with IR, RF remotes included
• Detachable 3-way wall switch keypad for UP/STOP/DOWN manual operation
• Wireless 5-12 volt trigger included
• RJ45 port allows 3rd party control system integration
Quality and Reliability
• Silent operation synchronous motor and low power consumption
• Flame Retardant: Complies with NFPA 701 Standards (MaxWhite FG & AcousticPro UHD)
• GREENGUARD® and GREENGUARD® Gold Certified (MaxWhite FG)
• 5-year manufacturer's warranty
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
1
PRODUCT WHITE PAPER
http://www.eliteproav.com
2.2 Certifications
2.3 Model Numbers
Model Number
Nominal
Diagonal
Aspect
Ratio
Viewing
Height
(in)
Viewing
Width
(in)
Screen Material
Gain
Case
Color
N.W.
(lbs)
G.W.
(lbs)
Packaging Dimensions
(LxWxH)
SKT100XVW-E10
100"
4:3
60.0
80.0
MaxWhite® FG
1.1
White
30.0
38.7
102.6"x6.7"x6.3"
SKT120XVW-E9
120"
4:3
72.0
96.0
MaxWhite® FG
1.1
White
33.8
43.0
122.0"x6.7"x6.3"
SKT84XHW-E12
84"
16:9
41.2
73.2
MaxWhite® FG
1.1
White
24.5
32.3
98.0"x6.7"x6.3"
SKT100XHW-E12
100"
16:9
49.0
87.2
MaxWhite® FG
1.1
White
27.7
36.3
111.4"x6.3"x6.7"
SKT110XHW-E24
110"
16:9
53.9
95.9
MaxWhite® FG
1.1
White
32.9
42.1
122.0"x6.7"x6.3"
SKT120XHW-E20
120"
16:9
58.8
104.6
MaxWhite® FG
1.1
White
35.5
44.8
129.7"x6.7"x6.3"
SKT135XHW-E6
135"
16:9
66.2
117.7
MaxWhite® FG
1.1
White
38.4
48.1
144.9"x6.7"x6.3"
SKT150XHW-E6
150"
16:9
73.5
130.7
MaxWhite® FG
1.1
White
56.6
76.4
155.9"x8.5"x7.9"
SKT165XHW-E6
165"
16:9
80.9
143.8
MaxWhite® FG
1.1
White
61.5
82.3
166.5"x8.5"x7.9"
SKT106NXW-E12
106"
16:10
56.2
89.9
MaxWhite® FG
1.1
White
29.5
37.9
114.3"x6.7"x6.3"
SKT120NXW-E12
120"
16:10
63.6
101.8
MaxWhite® FG
1.1
White
34.3
43.4
127.6"x6.7"x6.3"
SKT100UH-E24-AUHD
SKT110UH-E24-AUHD
SKT120UH-E20-AUHD
100"
110"
120"
16:9
16:9
16:9
49.0
53.9
58.8
87.2
95.9
104.6
AcousticPro UHD
AcousticPro UHD
AcousticPro UHD
1.0
1.0
1.0
Black
Black
Black
28.6
33.2
35.4
37.6
42.6
45.1
111.8"x6.7"x6.3"
122.0"x6.7"x6.3"
129.7"x6.7"x6.3"
SKT135UH-E12-AUHD
135"
16:9
66.2
117.7
AcousticPro UHD
1.0
Black
51.7
70.7
142.9"x8.5"x7.9"
SKT150UH-E12-AUHD
150"
16:9
73.5
130.7
AcousticPro UHD
1.0
Black
57.0
74.4
156.3"x8.5"x7.9"
SKT180UH-E3-AUHD
180"
16:9
88.3
156.9
AcousticPro UHD
1.0
Black
66.6
88.1
182.3"x8.5"x7.9"
Section 3: Screen Material Specifications
.
3.1.1 MaxWhite® FG Characteristics
MaxWhite® Fiberglass (FG) is fiberglass backed for added
stiffness which provides the flattest possible non-tensioned
screen surface with universal applications. This material
provides wide viewing uniform diffusion while giving precise
definition, color reproduction and black & white contrast.
The screen surface has a black-backing to eliminate light
penetration, is mildew resistant and washable with mild soap
and water.
* Manufacturer tip: This is an enhanced matte white product for higher end DLP/LCD projectors suitable for
commercial and residential presentations.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
2
PRODUCT WHITE PAPER
http://www.eliteproav.com
Features & Benefits
•
•
•
•
•
•
•
•
•
•
Multi-layer weave with textured surface
Fiberglass backing with black backing
Gain: 1.1
View Angle: 180° (90° ± LR)
Not compatible with Ultra/Short-throw Projectors
Mildew Resistant
Active 3D, 4K Ultra HD, and HDR ready
Surface can be cleaned with mild soap and water
Flame Retardant: Complies with NFPA 701 Standards
GREENGUARD® and GREENGUARD® Gold Certified |
UL 2818
Specifications
Thickness
0.36 mm (0.014")
Weight
350 g/m²
Maximum Height
3.2 M (10 ft)
On-axis Gain
1.0
Half-Gain Angle
Does not reach half gain
3.1.2 Gain and Viewing Angle
3.2.1 AcousticPro UHD Characteristics
The AcousticPro UHD (ultra-high definition) is a moiré-free selfsupported acoustically transparent front projection screen
material. The dense synthetic weave is compatible with UltraHigh Definition/4K resolutions while mitigating light penetration
for a brighter picture. The AcousticPro UHD design maximizes
sound penetration with minimal attenuation without
compromising picture quality. The AcousticPro UHD material’s
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
3
PRODUCT WHITE PAPER
http://www.eliteproav.com
wide diffusion uniformity offers a broad viewing angle with superb picture quality across the entire surface. This
provides equal brightness levels on or off axis.
"Speaking of "observing", the Electric125H-AUHD performed admirably across a diversity of content and at all
hours of day and night; its ambient light suppression was top-notch." – Brian Dipert, EDN Network
Features & Benefits
•
•
•
•
•
•
•
•
Gain: 1.0
Viewing Angle: 180° (90°L/R)
Moiré-free
Wide diffusion uniformity – maintains luminance
levels throughout entire surface
Mildew Resistant
4K UHD, Active 3D, and HDR ready
Mean Attenuation: -2.36dB
Flame Retardant: Complies with NFPA 701 Standards
Specifications
Thickness
0.64 mm (0.025")
Weight
500 g/m²
Maximum Height
2.5 M (8.2 ft)
On-axis Gain
1.0
Half-Gain Angle
Does not reach half gain
3.1.2 Gain and Viewing Angle
Section 4: Execution
.
4.1 Important Safety & Warning Precautions
Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top
Drop in the roller. Please be aware of this as it will void your warranty with EliteProAV™. Unapproved changes
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
4
PRODUCT WHITE PAPER
http://www.eliteproav.com
or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will
void your warranty. For more information, please contact our Technical Support Department at (877) 511-1211
Ext. 604.
•
•
•
•
•
•
•
•
•
•
•
•
Please retain this user’s guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven or inclined surfaces.
Do not put heavy objects on the power cord and position it properly to avoid creating a trip obstacle.
Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short circuit.
There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself. No
one except authorized technicians can open and make repairs to this unit.
Make sure the power source this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid
overheat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances.
•
•
•
•
•
•
Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.
Avoid direct Sunshine, rain shower and moisture.
Keep away from fire sources and high temperature to prevent this device from overheating.
Cut off the power supply first before transportation or maintenance.
Fully disconnect from the power supply when the unit is not in use for a long period of time, as should be
done with any other electric household appliance.
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious
damage or if there are any evident broken parts.
4.2 Warning
The Screen’s Top Black Drop is already set to its maximum drop distance. There is NO extra top black drop in
the roller. Please be aware of this as it will void the limitation of your warranty.
Individual modifications to this product are prohibited and will void the warranty with the manufacturer. Please
contact EliteProAV™ Customer Service for any questions.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
5
PRODUCT WHITE PAPER
http://www.eliteproav.com
However, there is no guarantee that the interference will not occur on a particular installation. If this equipment
causes harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
 Reorient or relocate the receiving antenna of the device which may be causing the interference.
 Increase the separation between the screen and the device’s receiver.
 Connect the equipment into a different power outlet other than the device.
4.3 Pre-Installation
1. Carefully unpack the screen.
2. Always handle the screen in a leveled position on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles
such as dust, sawdust, and/or liquids.
NOTE
Regardless of the mounting method, the screen should be securely supported so that the vibration or pulling on the
viewing surface will not cause the casing to become loose or fall. Included mounting screws are complimentary
and may not be appropriate for all mounting surfaces. Use appropriate anchors to safely secure the screen to the
mounting surface or consult with a professional installer.
4.4 Hardware Parts List
Please make sure all parts listed below are included before proceeding with the installation.
A. Wall/Ceiling mount
bracket x2
For 135”below
B. M5x60 Screw x4
C. M12 Dry-wall
anchor x4
D. Bracket
connector x2
E. M5x11 Bolt
Screw x4
G. M5x30MM eyebolt
screw & M5 nut x2
H. Hidden wall
bracket x2
I. R18xR6x1
washer x4
J. Snap link x2
For135”-180”
F. M5x25MM round head
cross screws x2
4.5 Installation Instructions
For installation assistance, please consult a professional Installer. EliteProAV™ is not liable for faulty installations.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
6
PRODUCT WHITE PAPER
http://www.eliteproav.com
A. Wall Mount
I.Flush mount with wall/ceiling brackets (fixed position)
M5x11 Bolt Screw
W
H
Bracket connector
(D)
Wall/Ceiling Mount
1. Begin by sliding the bracket connector (D) all the way to each end of the housing.
Bracket (A)
2. Then attach it to the wall/ceiling mount bracket (A) with the M5x11bolt screw (E).
3. Measure and mark the (WxH) distance between the two holes on each bracket.
4. Drill a hole for each screw hole on the marked areas.
5. Insert a dry-wall anchor (C) into the wall.
6. Insert aM5x60 Screw (B) in each dry-wall anchor (C) and screw it in leaving about 1/8” of an inch.
7. Hang the screen by aligning the end cap holes to the M5x60 screws (B).
W
H
Dry-wall
anchors (C)
M5x60
screws (b)
Wall
Wall
II. Flush hidden mount (movable position)
This mount method allows the screen to slide horizontally.
Front view of bracket (h)
Side view of
bracket (h)
1. Determine where the screen will be installed. Then, measure and mark the distance between the top and bottom
screw holes from each hidden wall mount bracket (H).
2. Drill a hole on all marked areas and install the brackets with the dry-wall anchor(C), M5x60 screw (B), and a
washer (I). Make sure both brackets are properly leveled.
3. Hang the screen by placing the downward “catch” located on the back over the brackets upper “catch”.
4. After making sure the screen is secured, you can slide it left / right to properly center it in position.
5. Lastly, screw the M5 screw (F) into the upper hole of the bracket to add additional support for the screen.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
7
PRODUCT WHITE PAPER
http://www.eliteproav.com
B. Ceiling Mount
I. Ceiling Mount (fixed position on end caps)
Dry-wall anchors (C)
Ceiling
W
Washer (I)
H
M5x60 screw (B)
NOTE: The brackets do not slide. They are designed to attach the end caps only.
1. Attach the Wall/Ceiling mount bracket (A) to the Bracket connector (D) located on top of the screen’s housing (preinstalled).
2. Determine where the screen will be installed. Then, measure and mark the distance between the (WxH) locations.
3. Drill a hole on all marked areas and insert a dry-wall anchor (C).
4. Secure the screen by inserting the M5x60 screw (B) and a washer (I) thru the wall/ceiling mount brackets (A).
Two or more people are required while one holds the screen in place.
II. Suspended
1. Screw the eyebolt (G) on the bracket connector (D).
2. Attach the snap link (J) through the eyebolt (G) and connect it to an eyebolt screw (not included) rated
for the screen’s weight.
4.6 Screen Material Tension Adjustment (4mm Allen Wrench required and not included)
Remove the weight bar end cap to expose the adjustment tension knob. Insert your 4mm Allen Wrench to push in
the adjustment tension knob, turn clockwise and your screen will gain more tension. Turn the Allen Wrench
counter clockwise and the screen will lose tension. Please note this adjustment is not necessary as the tension of
the screen has been set to its factory setting for best performance. Please contact EliteProAV™ for assistance to
avoid damaging the screen and voiding your warranty.
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
8
PRODUCT WHITE PAPER
http://www.eliteproav.com
4.7 Controls and Accessories
A. IR Remote
B. RF Remote
C. Wall switch control box
D. 5-12 volt trigger cable
E. IR extended “eye” receiver
F. Wireless 5-12v trigger cable
G. AAA batteries
H. Bubble leveler
4.8 Screen Operation
Electric Current: Depending upon region, your EliteProAV™ screen will operate on 100v, 110v, or 220v voltage.
1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the power outlet.
2. Once the screen’s has power, you’ll be able to control it using any of the 6 methods described below.
6 ways to control your Saker
1. IR remote control (Item A, Fig 1): The Infrared functions by direct line
of sight contact with a beam range of 30 feet. Aim the IR remote at the
circular window located on the left side of the screen.
2. IR “Eye” Receiver (Item E, Fig 2): The IR “Eye” Receiver plugs
directly into the screen’s RJ-45 input to present a low profile line-of-sight
control option for your IR remote control even in a recessed ceiling
installation.
UP
STOP
DOWN
Fig.1
IR/RF remote
3. RF Remote Control (Item B): The radio waves eliminate the need for a
direct line of sight with a range of 100 feet.
4. 3-Way Wall Switch (Item C, Fig 3): The 3-way wall switch
is a wall mount control box with an up/stop/down button and
plugs directly into the screen’s RJ-45 input.
Fig.3
Fig.2
IR “eye” receiver
3 Way Wall Switch
(does not have IR sensor)
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
9
PRODUCT WHITE PAPER
http://www.eliteproav.com
5. 5-12 volt trigger (Item D, Fig 4): The built-in
5-12V trigger input allows your screen to
synchronize its drop & rise with the projector’s
power cycle. The screen deploys when the
projector powers up and will retract when the
projector powers down. The 5-12 volt RJ45
cable connects to your projector’s trigger output
via a separate cable that may or may not be
provided by the manufacturer of the projector.
The trigger feature will not work without an
output cable from the projector, but it can be
tested by connecting the Red (+) and Green (-)
cable to a 9-volt battery.
3 prong power cord
RJ45 Input
Fig.4
5-12 volt trigger cable
6. Wireless 5-12 volt trigger (Item F, Fig 5): The RF remote control serves as a dual purpose, independently as a
handheld remote control, or in conjunction with the Wireless 5-12 volt trigger cable. The radio frequency
technology can be programmed to send a wireless signal to synchronize its drop & rise with the projector’s power
cycle.
Here’s how to set up your Wireless 5-12 volt trigger | Synchronization Instructions
Step1: Connect one end of the 3.5 mm wireless 5-12 volt trigger cable to the RF remote.
Step 2: Connect the other 3.5 mm end of the wireless 5-12 volt trigger cable to your projector
Step 3: Make sure to unplug your screen from the power outlet
Step 4: Hold the UP button on your RF remote
Step 5: While holding the UP button, plug the screen back to the power outlet
Step 6: Wait 5 seconds and then release the UP button
Step 7: Your 5-12V wireless trigger should now be activated with your screen and ready to be used and able to
control your screen with your projector’s power cycle
Repeat the steps again if not successful.
(Please be aware, the projector on/off cycle may take longer to fully activate. It usually takes around 2030seconds for full off and on cycle each time)
The back of the
projector
Fig 5
DC 5-12V out
Wireless 5-12V
trigger cable
UP
Stop
Down
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
10
PRODUCT WHITE PAPER
http://www.eliteproav.com
Section 5: Product Specifications
.
5.1 Dimensions
Model
Numbers
A
A1
A2
A3
A4
A5
A6
A7
B
B1
B2
B3
B4
B5
C
C1
C2
C3
Unit: Inches
SKT100XVW-E10
98.4
80.0
97.6
96.6
65.1
89.4
94.0
4.7
76.6
60.0
72.4
10.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT120XVW-E9
116.2
96.0
115.4
114.4
82.9
105.4
111.8
4.7
87.6
72.0
83.4
9.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT84XHW-E12
91.8
73.2
91.0
90.0
58.5
81.1
87.4
3.9
59.8
41.2
55.6
12.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT100XHW-E12
105.7
87.2
105.0
103.9
72.4
95.0
101.4
3.9
67.6
49.0
63.4
12.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT110XHW-E24
116.2
95.9
115.4
114.4
82.9
105.3
111.8
4.7
84.6
53.9
80.3
24.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT120XHW-E20
124.8
104.6
124.1
123.0
91.5
114.1
120.5
4.7
85.4
58.8
81.2
20.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT135XHW-E6
139.4
117.7
138.6
137.6
106.1
127.1
135.0
4.7
78.8
66.2
74.5
6.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT150XHW-E6
153.1
130.7
151.7
150.4
118.9
139.4
148.0
4.3
86.8
73.5
81.9
6.0
2.4
4.6
4.6
4.9
1.4
0.9
SKT165XHW-E6
166.4
143.8
165.0
163.6
132.1
153.3
161.3
4.7
94.2
80.9
89.3
6.0
2.4
4.6
4.6
4.9
1.4
0.9
SKT106NXW-E12
108.3
89.9
107.5
106.5
75.0
97.8
103.9
3.9
74.8
56.2
70.6
12.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT120NXW-E12
121.9
101.8
121.1
120.1
88.6
111.2
117.5
4.7
82.2
63.6
78.0
12.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT100UH-E24-AUHD
105.7
87.2
105.0
103.9
72.4
95.0
101.4
3.9
79.6
49.0
75.4
24.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT110UH-E24-AUHD
116.2
95.9
115.4
114.4
82.9
105.3
111.8
4.7
84.6
53.9
80.3
24.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT120UH-E20-AUHD
124.8
104.6
124.1
123.0
91.5
114.1
120.5
4.7
85.4
58.8
81.2
20.0
2.4
3.9
4.0
4.3
1.4
0.9
SKT135UH-E12-AUHD
140.0
117.7
138.6
137.3
105.8
127.1
134.9
4.7
85.5
66.2
80.6
12.0
2.4
4.6
4.6
4.9
1.4
0.9
SKT150UH-E12-AUHD
153.1
130.7
151.7
150.4
118.9
140.2
148.0
4.7
92.8
73.5
87.9
12.0
2.4
4.6
4.6
4.9
1.4
0.9
SKT180UH-E3-AUHD
179.3
156.9
177.8
176.5
145.0
167.1
174.1
5.1
98.5
88.3
93.6
3.0
2.4
4.6
4.6
4.9
1.4
0.9
Unit: mm
SKT100XVW-E10
2499
2032
2479
2453
1653
2272
2388
120
1946
1524
1838
254
60
100
102
108
35
23
SKT120XVW-E9
2951
2438
2931
2905
2105
2678
2840
120
2226
1829
2118
229
60
100
102
108
35
23
SKT84XHW-E12
2331
1860
2311
2285
1485
2060
2220
100
1519
1046
1411
305
60
100
102
108
35
23
SKT100XHW-E12
2686
2214
2666
2640
1840
2414
2575
100
1718
1245
1610
305
60
100
102
108
35
23
SKT110XHW-E24
2951
2435
2931
2905
2105
2675
2840
120
2148
1370
2040
610
60
100
102
108
35
23
SKT120XHW-E20
3171
2657
3151
3125
2325
2897
3060
120
2170
1494
2062
508
60
100
102
108
35
23
SKT135XHW-E6
3541
2989
3521
3495
2695
3229
3430
120
2001
1681
1893
152
60
100
102
108
35
23
SKT150XHW-E6
3889
3321
3853
3819
3019
3541
3759
110
2205
1868
2080
152
60
118
118
125
35
23
SKT165XHW-E6
4227
3653
4191
4155
3355
3894
4097
119
2393
2055
2268
152
61
117
117
124
36
23
SKT106NXW-E12
2751
2283
2731
2705
1905
2483
2640
100
1900
1427
1792
305
60
100
102
108
35
23
SKT120NXW-E12
3096
2585
3076
3050
2250
2825
2985
120
2088
1615
1980
305
60
100
102
108
35
23
SKT100UH-E24-AUHD
2686
2214
2666
2640
1840
2414
2575
100
2022
1245
1915
610
60
100
102
108
35
23
SKT110UH-E24-AUHD
2951
2435
2931
2905
2105
2675
2840
120
2149
1370
2040
610
60
100
102
108
35
23
SKT120UH-E20-AUHD
3171
2657
3151
3125
2325
2897
3060
120
2170
1494
2062
508
60
100
102
108
35
23
SKT135UH-E12-AUHD
3557
2989
3521
3487
2687
3229
3427
120
2171
1681
2046
305
60
118
118
125
35
23
SKT150UH-E12-AUHD
3889
3321
3853
3819
3019
3561
3759
120
2358
1868
2233
305
60
118
118
125
35
23
SKT180UH-E3-AUHD
4553
3985
4517
4483
3683
4245
4423
130
2503
2242
2378
76
60
118
118
125
35
23
Note: Data Error: ±1"
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
11
PRODUCT WHITE PAPER
http://www.eliteproav.com
5.2 Drawings
5.3 Pictures
Saker Tab-Tension Series in black and white housing
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
12
PRODUCT WHITE PAPER
http://www.eliteproav.com
Left End Housing Detail
Right End Housing Detail
End Cap Detail
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
13
PRODUCT WHITE PAPER
http://www.eliteproav.com
Wight Bar Detail
Flush Wall Mount Bracket Detail
Installation Kit
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
14
PRODUCT WHITE PAPER
http://www.eliteproav.com
Remote Kit
Section 6: Company Description
.
6.1 About EliteProAV™
EliteProAV™ is a the manufacturer of projector screens for the commercial AV sales channel. It is a division of
Elite Screens Inc., an ISO9001:2015 certified manufacturer that is presently the leading international brand of CE
Retail projector screens with offices located worldwide.
EliteProAV™ provides an array of dedicated commercial grade projector screens for professional integrators.
This includes certified products that are also compatible with building codes as well as programs, warranties
and trained professionals to assist installers every step of the way. Product is available through a series of
regional warehouses located in Southern California, Texas, Georgia, and Maryland. EliteProAV™ is located at
12282 Knott St. Garden Grove, CA 92841. For more information, please call 877-511-1211 or visit
http://www.eliteproav.com.
###
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd. | Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
15
Download PDF