Sanyo XU74 Eco Projector MANUAL

Multimedia Projector
MODEL
PLC-XU74
Owner's Manual
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability,
and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors,
and matrix liquid crystal display (LCD) technology.
◆ Compact Design
◆ Logo Function
This projector is designed compact in size
and weight. It is easy to carry and work
anywhere you wish to use.
◆ Compatibility
The projector widely accepts various video
and computer input signals including:
C o m p u t e r s , 6 C o l o r s y s t e m s ( PA L ,
SECAM, NTSC, NTSC4.43, PAL-M, and
PAL-N), Component video, S-Video and
RGB scart.
The Logo function allows you to customize
the screen logo with the Logo functions.
(p.42-44) You can capture an image for
the screen logo, choose a logo between
provided and captured.
◆ Switchable Interface Terminal
The projector provides a switchable
interface terminal. You can use the terminal
as computer input or monitor output
conveniently. (p.46)
◆ Simple Computer System Setting
◆ Power Management
The projector has the Multi-scan system
to conform to almost all computer output
signals quickly. (p.26)
The Power management function reduces
power consumption and maintains the
lamp life. (p.46)
◆ Digital Zoom (for Computer)
◆ Lamp Control
The digital zoom function expands (to
approx. 16 times of the screen size) or
compresses (to approx. a half of the
screen size) the image size, allowing you
to focus on crucial information during the
presentation. (p.33)
◆ Security Function
◆ Noise reduction function
Brightness of the projection lamp can be
selected. (p.47)
The Noise reduction function helps you to
reduce the contained noise on the screen
to get smoother images. (p.39)
The Security function helps you to ensure
the security with the Key lock (p.48) and
the PIN code lock (p.18, 48, 49) functions.
You can lock the operation on the projector
and the remote control. Also you can
prevent unauthorized persons from using
the projector.
◆ Blackboard Function
◆ Input Search Function
Blackboard* can be used as a projection
screen.
*The board color is limited to Green. (p.30, 37)
Input signal can be searched automatically.
(p.45)
◆ Multilanguage Menu Display
2
Operation menu is available in 16
languages: English, German, French,
Italian, Spanish, Portuguese, Dutch,
Swedish, Finnish, Polish, Hungarian,
Romanian, Russian, Chinese, Korean, and
Japanese. (p.41)
✔ Note:
•The On-Screen Menu and figures in
this manual may differ slightly from the
product.
•The contents of this manual are subject to
change without notice.
Table of Contents
Features and Design . . . . . . . . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . 3
To the Owner. . . . . . . . . . . . . . . . . . . 4
Safety Instructions . . . . . . . . . . . . . . 5
Air Circulation
6
Installing the Projector in Proper
Position
6
Moving the Projector
6
Compliance . . . . . . . . . . . . . . . . . . . . 7
Part Names and Functions . . . . . . . . 8
Front
Back
8
8
Bottom
8
Rear Terminal
Top Control
Remote Control
Remote Control Battery Installation
Operating Range
9
10
11
12
12
Installation. . . . . . . . . . . . . . . . . . . . . 13
Positioning the Projector
13
Adjustable Feet
13
Connecting the AC Power Cord
Connecting to a Computer
Connecting to Video Equipment
Connecting to Component Video
Equipment
14
15
16
17
Basic Operation . . . . . . . . . . . . . . . . . 18
Turning On the Projector
18
Turning Off the Projector
19
How to Operate the On-Screen Menu20
Menu Bar21
Zoom and Focus Adjustment22
Keystone Correction22
Sound Adjustment23
Computer Input .. . . . . . . . . . . . . . . . 25
Input Source Selection25
Computer System Selection26
Auto PC Adjustment27
Manual PC Adjustment28
Image Level Selection 30
Image Level Adjustment
31
Screen Size Adjustment
32
Video Input . . . . . . . . . . . . . . . . . . . . . 34
Input Source Selection (Video, S-Video)34
Input Source Selection
(Component, RGB Scart 21-pin)
35
Video System Selection
36
Image Level Selection 37
Image Level Adjustment
38
Screen Size Adjustment
40
Setting . . . . . . . . . . . . . . . . . . . . . . . . 41
Setting
41
Maintenance and Cleaning . . . . . . . . 51
Warning Indicator
Cleaning the Air Filters
Attaching the Lens Cover
Cleaning the Projection Lens
Cleaning the Projector Cabinet
Lamp Replacement
Lamp Replacement Counter
51
52
52
53
53
54
55
Appendix . . . . . . . . . . . . . . . . . . . . . . 56
Troubleshooting
Menu Tree
Indicators and Projector Condition
Compatible Computer Specifications
Technical Specifications
Optional Parts
Configurations of Terminals
56
58
60
61
62
63
64
PIN Code Number Memo
65
Remote Control Operation23
Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its
respective corporation.
To the Owner
Before operating this projector, read this manual
thoroughly and operate the projector properly.
This projector provides many convenient features and
functions. Operating the projector properly enables
you to manage those features and maintains it in
better condition for a considerable time.
Improper operation may result in not only shortening
the product-life, but also malfunctions, fire hazard, or
other accidents.
If your projector seems to operate improperly,
read this manual again, check operations and
cable connections and try the solutions in the
"Troubleshooting" section on pages 56-57 of this
manual. If the problem still persists, contact the
dealer where you purchased the projector or the
service center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Safety Precaution
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
– This projector produces intense light from the
projection lens. Do not stare directly into the lens
as much as possible. Eye damage could result.
Be especially careful that children do not stare
directly into the beam.
– Install the projector in a proper position. If not, it
may result in a fire hazard.
– Provide appropriate space on the top, sides
and rear of the projector cabinet for allowing air
circulation and cooling the projector. Minimum
clearance must be maintained. If the projector is to
be built into a compartment or similarly enclosed,
the minimum distances must be maintained. Do
not cover the ventilation slot on the projector.
Heat build-up can reduce the service life of your
projector, and can also be dangerous.
SIDE and TOP
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL WITH
THIS UNIT.
NOTE:This symbol and recycle system are applied to EU
countries only and not applied to the countries in the
other area of the world.
Your SANYO product is designed
and manufactured with high quality
materials and components which
can be recycled and reused.
This symbol means that electrical
and electronic equipment, at their
end-of-life, should be disposed of
separately from your household
waste.
Please dispose of this equipment at your local
community waste collection/recycling centre. In
the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live
in!
REAR
0.7'(20cm)
1.5'(50cm)
3'(1m)
1.5'(50cm)
– If the projector is not to be used for an extended
time, unplug the projector from the power outlet.
CAUTION ON HANGING FROM THE CEILING
When hanging the projector from the
ceiling, clean air intake vents, air filters,
or top of the projector periodically with
a vacuum cleaner. If you leave the
projector unclean for a long time, the
dust will block the operation of the
cooling function, and it may cause a
breakdown or a disaster.
Do not set the proj ector in greasy, wet,
or smoky conditions such as IN a kitchen
to prevent A Breakdown or a disaster. If
The PROJ ECTor comes in contact with oil or
chemicals, IT may become deteriorated.
CAUTION
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle
que définie dans la norme ANSI/NFPA 75 Standard
for Protection of Electronic Computer/Data Processing
Equipment.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER
USE.
Safety Instructions
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them
for later use. Unplug this projector from AC power
supply before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the
projector.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This
will prevent damage due to lightning and power line
surges.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool,
etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand,
or table. The projector may fall, causing serious injury
to a child or adult, and serious damage to the projector.
Use only with a cart or stand recommended by the
manufacturer, or sold with the projector. Wall or shelf
mounting should follow the manufacturer's instructions,
and should use a mounting kit approved by the
manufacturers.
An appliance and cart combination
should be moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the
appliance and cart combination to
overturn.
Slots and openings in the back and bottom of the
cabinet are provided for ventilation, to ensure reliable
operation of the equipment and to protect it from
overheating.
The openings should never be covered with cloth or
other materials, and the bottom opening should not be
blocked by placing the projector on a bed, sofa, rug, or
other similar surface. This projector should never be
placed near or over a radiator or heat register.
Do not install the projector near the ventilation duct of
air-conditioning equipment.
This projector should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power supplied, consult your
authorized dealer or local power company.
Do not overload wall outlets and extension cords as
this can result in fire or electric shock. Do not allow
anything to rest on the power cord. Do not locate this
projector where the cord may be damaged by persons
walking on it.
Do not attempt to service this projector yourself
as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
Unplug this projector from wall outlet and refer
servicing to qualified service personnel under the
following conditions:
a.When the power cord or plug is damaged or frayed.
b.If liquid has been spilled into the projector.
c.If the projector has been exposed to rain or water.
d.If the projector does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as improper adjustment of other controls
may result in damage and will often require extensive
work by a qualified technician to restore the projector
to normal operation.
e.If the projector has been dropped or the cabinet has
been damaged.
f.When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or injury
to persons.
Upon completion of any service or repairs to this
projector, ask the service technician to perform routine
safety checks to determine that the projector is in safe
operating condition.
This projector should not be placed in a builtin installation such as a book case unless proper
ventilation is provided.
Never push objects of any kind into this projector
through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the projector.
Voor de klanten in Nederland
NL
Bij dit produkt zijn batterijen
geleverd.
Wanneer deze leeg zijn, moet u ze
niet weggooien maar inleveren als
KCA.
Safety Instructions
Air Circulation
Openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to
protect it from overheating, and these openings must
not be blocked or covered.
Installing the Projector
in Proper Position
Install the projector properly. Improper Installation
may reduce the lamp life and cause a fire hazard.
20˚
CAUTION
Hot air is exhausted from the exhaust vent. When
using or installing the projector, the following
precautions should be taken.
–Do not put any flammable object or spray can
near the projector, hot air is exhausted from the
ventilation holes.
–Keep the exhaust vent at least 3' (1 m) away from
any objects.
–Do not touch a peripheral part of the exhaust vent,
especially screws and metallic part. This area will
become hot while the projector is being used.
–Do not put anything on the cabinet. Objects put
on the cabinet will not only get damaged but also
cause fire hazard by heat.
Cooling fans are provided to cool down the
projector. The fans’ running speed is changed
according to the temperature inside the projector.
Do not tilt the projector more than
20 degrees from side to side.
20˚
Do not point the projector up to
project an image.
Do not point the projector down
to project an image.
Do not put the projector on either
side to project an image.
Moving the Projector
Exhaust Vent
When moving the projector, replace the lens cover
and retract the adjustable feet to prevent damage to
the lens and cabinet. When the projector is not in use
for an extended period, put it into a suitable case to
protect the projector.
When handling the projector, do not drop, bump,
subject it to strong forces, or put other things on the
cabinet.
USE CAUTION IN CARRyING OR
TRANSPORTING THE PROjECTOR
Exhaust Vent
Air Intake Vent
(Hot air exhaust)
Air Intake Vent
6
–Do not drop or bump the projector, otherwise
damages or malfunctions may result.
–When carrying the projector, use a suitable
carrying case.
–Do not transport the projector by using a courier
or transport service in an unsuitable transport
case. This may cause damage to the projector.
To transport the projector through a courier or
transport service, consult your dealer for their
information.
–Do not put the projector in a case before the
projector is cooled enough.
Compliance
Federal Communication Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If
such changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number
: PLC-XU74
Trade Name
: Sanyo
Responsible party : SANYO FISHER COMPANY
Address
: 21605 Plummer Street, Chatsworth, California 91311
Telephone No.
: (818)998-7322
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure
that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should
you be unable to insert the plug into the outlet, contact your electrician.
GROUND
AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin
face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the
same rating, marked thus
. If the fuse cover is detachable, never use the plug with the cover omitted. If a
replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug
(i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted. (See Over)
WARNING : A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET.
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow . . . . . . . Earth
Blue . . . . . . . . . . . . . . . . . Neutral
Brown . . . . . . . . . . . . . . . . Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked
by the letter E or by the safety earth symbol
or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or
coloured red.
WARNING: THIS APPARATUS MUST BE EARTHED.
ASA
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
Part Names and Functions
Front
q Infrared Remote Receiver
w Zoom Ring
e Projection Lens
r Focus Ring
t Lens Cover
(See page 52 for attaching.)
yExhaust Vents
CAUTION
qw e r
t
Hot air is exhausted from the exhaust vent.
Do not put heat-sensitive objects near this
side.
y
Back
u Top Controls and Indicators
y
u
i
o
!0 !1
i Speaker
o Air Intake Vent
!0 Power Cord Connector
!1 Terminals and Connectors
!2 Lamp Cover
!3 Air Intake Vents (back and bottom)
!4 Air Filters
✽
!5 Adjustable Feet
✽ Kensington Security Slot
Bottom
!2
!3
!4
This slot is for a Kensington lock used to
deter theft of the projector.
For more information, visit
http://www.kensington.com.
*Kensington is a registered trademark of ACCO
Brands Corporation.
!5
Part Names and Functions
Part Names and Functions
Rear Terminal
✽
q
w
e
r
t
o
q USB (Series B)
t S-VIDEO IN
In order to operate the computer with
the remote control during a presentation,
connect the USB port of the computer to the
projector with a USB cable. (p.15)
w SERVICE PORT
y
u
i
Connect the S-VIDEO output from video
equipment to this jack. (p.16)
y AUDIO IN
This jack is used to service the projector.
Connect the audio output from video
equipment connected to t or o to this
jack. (When the audio output is monaural,
connect it to L (MONO) jack.) (p.16)
e COMPUTER IN 1/COMPONENT IN
Connect output signal from a computer,
RGB scart 21-pin video output, or
component video output to this terminal.
(p.15, 17)
When the cable is of the longer variety, it
is advisable to use this terminal and not
COMPUTER IN 2/MONITOR OUT.
r COMPUTER IN 2 / MONITOR OUT
This terminal is switchable and can be
used for input from a computer and video
equipment (component or RGB scart
21-pin) or output to the other monitor.
Set the terminal up as either Computer
input or Monitor output properly. (Used
for Monitor out, this terminal outputs only
incoming signal from COMPUTER IN 1/
COMPONENT IN terminal.) (p15, 17, 46)
u AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this
jack. (p.15 - 17)
This terminal outputs sound from AUDIO IN
terminal (y or i).
i COMPUTER/ COMPONENT AUDIO IN
Connect the audio output (stereo) from a
computer or video equipment connected to
e or r to this jack. (p 15, 17)
o VIDEO IN
Connect the composite video output from
video equipment to VIDEO jack. (p.16)
✽
RESET button
A built-in micro processor which controls this
unit may occasionally malfunction and need
to be reset. This can be done by pressing
the RESET button with a pen, which will
shut down and restart the unit. Do not use
the RESET function excessively.
Part Names and Functions
Top Control
q
w
e
r t y
u
i
o
q SELECT button
yWARNING indicator
–Execute the selected item. (p.20)
–Expand or compress the image in Digital
zoom mode. (p.33)
w POWER ON–OFF button
Turn the projector on or off. (p.18, 19)
eMENU button
Emit a red light when the projector detects
an abnormal condition. This also blinks
red when the internal temperature of the
projector exceeds the operating range.
(p.51, 60)
u LAMP REPLACE indicator
Open or close the On-Screen Menu. (p.20)
Turn yellow when the life of the projection
lamp draws to an end. (p.54, 60)
r POWER indicator
i KEYSTONE button
Emit a red light until the projector gets
ready to be turned on. It turns red when
the projector is in the stand-by mode. It
remains green while the projector is under
operation. (p.18, 19, 60)
o POINT (ed7 8) buttons
tINPUT button
10
Select input source. (p.25, 34, 35)
Correct the keystone distortion. (p.22, 41)
–Select an item or adjust the value in the
On-Screen Menu. (p.20)
–Pan the image in Digital zoom + mode.
(p.33)
–Adjust the volume level. (Point 7 8
buttons) (p.23)
Part Names and Functions
Part Names and Functions
Remote Control
q POWER ON-OFF button
e
w
Turn the projector on or off. (p.18, 19)
w VIDEO button
q
Select VIDEO input source. (p.23, 34)
e COMPUTER button
Select COMPUTER input source. (p.23, 25, 35)
r MENU button
Open or close the On-Screen Menu. (p20)
t Point ed 7 8 (VOLUME + / –) buttons
!6
r
t
!5
y
!4
u
!3
i
!2
o !0
!1
– Select an item or adjust the value in the On
Screen Menu. (p.20)
– Pan the image in Digital zoom + mode. (p.33)
– Adjust the volume level. (Point 7 8 buttons) (p.23)
y SELECT button
– Execute the selected item. (p.20)
– Expand or compress the image in Digital zoom
mode. (p.33)
u D.ZOOM ed buttons
Zoom in and out the images. (p.24, 33)
i PAGE ed buttons
Scroll back and forth pages on the screen when
giving a presentation. Connect the projector and
your computer with a USB cable to use these
buttons. (p.9, 15)
o FREEZE button
Freeze the picture. (p.23)
!0 NO SHOW button
Temporarily turn off the image on the screen. (p.24)
!1 LAMP CONTROL button
Select the lamp mode. (p.24, 47)
!2 MUTE button
Mute the sound. (p.23)
!3 P-TIMER button
Operate the P-timer function. (p.24)
!4 IMAGE button
Select the image level. (p.24, 30, 37)
!5 AUTO PC button
Automatically adjust the computer image to its
optimum setting. (p.24, 27)
!6 KEYSTONE button
Correct the keystone distortion. (p.22, 41)
To ensure safe operation, please observe the following
precautions:
–Do not bend, drop the remote control or expose the
remote control to moisture or heat.
–For cleaning, use soft dry cloth. Do not apply
benzene, thinner, splay or any chemical material.
11
Part Names and Functions
Remote Control Battery Installation
1
Open the battery
compartment lid.
2
Install new batteries
into the compartment.
3
Replace the
compartment lid.
Two AA size batteries
For correct polarity
(+ and –), be sure
battery terminals are in
contact with pins in the
compartment.
To insure safe operation, please observe the following precautions:
●Use two (2) AA or LR6 type alkaline batteries.
●Always replace batteries in sets.
●Do not use a new battery with a used battery.
●Avoid contact with water or liquid.
●Do not expose the remote control to moisture or heat.
●Do not drop the remote control.
●If the battery has leaked on the remote control, carefully wipe the case clean and install
new batteries.
●Risk of explosion if a battery is replaced by an incorrect type.
●Dispose of used batteries according to the instructions.
Operating Range
Point the remote control toward the
projector (Infrared Remote Receiver)
when pressing any button. Maximum
operating range for the remote control is
about 16.4' (5 m) and 60° in front of the
projector.
12
16.4'
(5 m)
30°
30°
Installation
Positioning the Projector
For projector positioning, see the figures below. The projector should be set horizontally to the flat
screen.
✔ Note:
•The brightness in the room has a great influence on picture quality. It is recommended to limit
ambient lighting in order to obtain the best image.
•The values shown below are approximate and may vary from the actual sizes.
34.4' (10.5 m)
A:B = 9:1
(Inch Diagonal)
Max. Zoom
23.0' (7.0 m)
17.0' (5.2 m)
200"
Min. Zoom
250"
11.5' (3.5 m)
150"
4.6' (1.4 m)
100"
A
166"
126"
83"
40"
(Center)
B
Screen Size
(W x H) mm
4 : 3 aspect ratio
813 x 610
2032 x 1524
3048 x 2286
4064 x 3048
6096 x 4572
Zoom (min)
5.2' (1.6 m)
13.8' (4.2 m)
20.7' (6.3 m)
27.6' (8.4 m)
41.3' (12.6 m)
Zoom (max)
4.6' (1.4 m)
11.5' (3.5 m)
17.1' (5.2 m)
23.0' (7.0 m)
34.4' (10.5 m)
40"
100"
150"
200"
300"
Adjustable Feet
Projection angle can be adjusted up to 10.0 degrees
with the adjustable feet.
1
Lift the front of the projector and pull upward the
feet lock latches on both sides of the projector.
2
Release the feet lock latches to lock the adjustable
feet and rotate the adjustable feet to adjust the
position and tilt.
3
To retract the adjustable feet, lift the front of the
projector and pull and undo the feet lock latches.
Keystone distortion of the projected image can be
corrected by menu operation. (p.22, 41)
Adjustable Feet
Feet Lock Latches
13
Installation
300"
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100-120 V
or 200-240 V AC. This projector automatically selects
the correct input voltage. It is designed to work with
single-phase power systems having a grounded neutral
conductor. To reduce the risk of electrical shock, do not
plug into any other type of power system.
Consult your authorized dealer or service station if you
are not sure of the type of power being supplied.
Connect the projector with all peripheral equipment
before turning the projector on. (See pages 15-17 for
connection.)
Connect the AC power cord (supplied) to the
projector.
The AC outlet must be near this equipment
and must be easily accessible.
CAUTION
For safety, unplug the AC power cord when the projector is
not in use. When this projector is connected to an outlet with
the AC power cord, it is in Stand-by mode and consumes a
little electric power.
NOTE ON THE POWER CORD
AC power cord must meet requirements of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC outlet side
For the U.S.A. and Canada
For Continental Europe
For the U.K.
Ground
To power cord
connector on your
projector.
14
To the AC outlet.
(120 V AC)
To the AC outlet.
(200 - 240 V AC)
To the AC outlet.
(200 - 240 V AC)
Installation
Connecting to a Computer
Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
• USB Cable
• Audio Cables (Mini Plug: stereo)
( Not all the cables are supplied with this projector.)
USB port
Monitor Output
USB cable
Monitor Output
or
Monitor Input
VGA cable
External Audio Equipment
Audio Input
VGA cable
Audio cable
(stereo)
USB
Installation
Audio Output
Audio cable
(stereo)
COMPUTER IN 1/ COMPUTER IN 2/
COMPONENT IN MONITOR OUT
This terminal is switchable.
Set up the terminal as either
Computer input or Monitor
output. (See Page 46.)
AUDIO OUT
(stereo)
COMPUTER/
COMPONENT
AUDIO IN
✔ Note:
•Input sound to the COMPUTER/COMPONENT
AUDIO IN terminal when using the COMPUTER
IN 1/COMPONENT IN and the COMPUTER IN 2/
MONITOR OUT terminal as input.
•When connecting the AUDIO OUT to external
audio equipment, the projector's built-in speaker is
disconnected.
•W h e n t h e c a b l e i s o f t h e l o n g e r v a r i e t y, i t
is advisable to use the COMPUTER IN 1/
COMPONENT IN and not the COMPUTER IN 2/
MONITOR OUT.
•See page 63 for ordering optional parts.
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
15
Installation
Connecting to Video Equipment
Cables used for connection
• Video and Audio Cable (RCA x 3)
• S-VIDEO Cable
• Audio Cable (Mini Plug: stereo)
( Not all the cables are supplied with this projector.)
S-Video Output
Composite Video and Audio Output
(R)
(L)
(Video)
External Audio Equipment
S-Video cable
Video and audio cable
Audio Input
S-VIDEO
(R)
(L)
AUDIO IN
(Video)
VIDEO
Audio cable
(stereo)
AUDIO OUT
(stereo)
✔ Note:
•When connecting AUDIO OUT to external audio
equipment, the projector’s built-in speaker is
disconnected.
•See page 63 for ordering optional parts.
Unplug the power cords of both the projector
and external equipment from the AC outlet
before connecting cables.
16
Installation
Connecting to Component Video Equipment
Cables used for connection
• Audio Cables (Mini Plug :stereo)
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
( Not all the cables are supplied with this projector.)
RGB Scart
21-pin Output
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Component
cable
Audio cable
(stereo)
Installation
Audio Output
External Audio Equipment
Scart-VGA
cable
Component-VGA
cable
Audio Input
COMPUTER IN 1/COMPONENT IN
Audio cable
(stereo)
AUDIO OUT
(stereo)
COMPUTER/
COMPONENT
AUDIO IN
✔ Note:
•When connecting AUDIO OUT to external audio
equipment, the projector's built-in speaker is
disconnected.
•See page 63 for ordering optional parts.
Unplug the power cords of both the projector
and external equipment from the AC outlet
before connecting cables.
17
Basic Operation
Turning On the Projector
1
2
3
4
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
Connect the projector's AC power cord into an AC
outlet. The POWER indicator becomes red.
Press the POWER ON-OFF button on the top
control or on the remote control. The POWER
indicator becomes green and the cooling fans start
to operate. The preparation display appears on the
screen and the count down starts.
After the countdown, the input source that was
selected the last time and the Lamp mode status
icon (see page 47) appears on the screen.
16
The preparation display disappears after 30
seconds.
Selected Input Source and Lamp Mode
Lamp mode
If the projector is locked with a PIN code, PIN code
Input Dialog Box appears. Enter the PIN code as
instructed below.
(See page 47 for Lamp mode.)
To Enter a PIN code
Select a number by pressing the Point ed buttons,
and then press the Point 8 button to fix the number
and move the pointer. The number changes to "✳". If
you fixed an incorrect number, move the pointer to the
number you want to correct by pressing the Point 7
button, and then select the correct number by pressing
the Point ed buttons.
PIN Code Input Dialog Box
Repeat this step to complete entering a four-digit
number.
"1234" is set as the initial PIN code at the factory.
After entering the four-digit number, move the pointer
to "Set" by pressing the Point 8 button. Press the
SELECT button so that you can start to operate the
projector.
If you entered an incorrect PIN code, "PIN code" and
the number (✳✳✳✳) turns red. Enter the correct PIN
code all over again.
What is PIN code?
PIN (Personal Identification Number) code that allows
the person who knows it to operate the projector.
Setting a PIN code prevents unauthorized use of the
projector.
A PIN code consists of a four-digit number. Refer to the
PIN code lock function in the Setting on pages 48 and
49 for locking operation of the projector with your PIN
code.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer
be started. Set a new PIN code with special care,
write it down in column on page 65 of this manual, and
keep it at hand. Should the PIN code be missing or
forgotten, consult your dealer or service center.
18
After the OK icon
disappears, you can
operate the projector.
✔ Note:
•When the Input Search function is set
on On1 or On2, the input signal will
be searched automatically (p.45)
•When the Logo select function is
off, the logo is not be shown on the
screen. (p.42)
•When the "Countdown off" or "Off" is
selected in the Display function, the
countdown is not be shown on the
screen. (p.42)
•During the countdown period, all
operations are invalid.
•If the correct PIN code number is
not input for three minutes after the
PIN code dialog box appeared, the
projector is turned off automatically.
Basic Operation
Turning Off the Projector
1
Press the POWER ON-OFF button on the top
control or on the remote control, and a message
"Power off?" appears on the screen.
2
Press the POWER ON-OFF button again to turn
off the projector. The POWER indicator starts
to blink red, and it continues while the cooling
fans are operating for about 90 seconds. (You
can select the level of fan quietness and rotation
speed. See page 50.)
At this time you can disconnect the AC power
cord even if the fans are still running.
3
The message disappears after 4 seconds.
When the projector has cooled down enough to
be turned on again, the POWER indicator lights
red.
Basic Operation
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
✔ Note:
•When the On start function is on, this projector
is turned on automatically by connecting the AC
power cord to an AC outlet. (p.47)
•Do not operate the projector continuously without
rest. Continuous use may result in shortening
the lamp life. Turn off the projector and give it a
rest about an hour in every 24 hours.
•The running speed of cooling fans is changed
according to the temperature inside the projector.
•D o not put the projector in a case before the
projector is cooled enough.
•If the WARNING indicator blinks or emits a red
light, see "Warning Indicator" on page 51.
•While the POWER indicator is blinking, lamp
is being cooled down and the projector cannot
be turned on. Wait until the POWER indicator
becomes red to be turned on again.
19
Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedures.
1
Press the MENU button to display the On-Screen
Menu.
2
Press the Point 7 8 buttons to select a Menu icon
to adjust and press the Point ed buttons to select
an item to adjust.
3
Press the SELECT button to show the item data.
To adjust the data, press the Point 7 8 buttons.
Refer to the following pages for each adjustment.
Top Control
MENU button
POINT buttons
(outer ring)
SELECT button
Remote Control
MENU button
To close the On-Screen Menu, press the MENU
button again.
POINT buttons
✔ Note:
The selected item is not active until the SELECT
button is pressed.
SELECT button
Menu icon
On-Screen Menu
Menu bar
Pointer
(red framed )
Pointer (red framed )
Press the Point ed buttons to
move the pointer.
Item
SELECT
button
Item data
Press the Point 7 8
buttons to adjust the
value.
Quit
Exit this menu.
20
Basic Operation
Menu Bar
For detailed functions, see Menu Tree on p.58, 59.
For computer source
Guide Window
PC System Menu
Show the selected
Menu of the
On-Screen Menu.
Used to select computer Used to select an
system. (p.26)
image level among
Dynamic, Standard,
Real, Blackboard
(Green), and Image
1 ~ 4. (p.30)
Image Select Menu Screen Menu
Setting Menu
Used to adjust size of
image. [Normal / True
/ Wide / Full screen
/ Digital zoom +/–]
(p.32, 33)
Used to set
the projector's
operating
configurations.
(p.41-50)
PC Adjust Menu
Image Adjust Menu
Sound Menu
Used to select
input source either
Computer or
Video. (p.25)
Used to adjust
parameters to match
with input signal
format. (p.27-29)
Used to adjust computer
image.[Contrast /
Brightness / Color temp.
/ White balance (R/G/B)
/ Sharpness / Gamma]
(p.31, 32)
Used to adjust the
volume or mute the
sound. (p.23)
For video source
Input Menu
Image Select Menu
Screen Menu
Used to select input
source either Video or
Computer. (p.34, 35)
Used to select an image level among
Dynamic, Standard, Cinema, Blackboard
(Green) and Image 1 ~ 4. (p.37)
Used to set size of
image to Normal or
Wide. (p.40)
Same function as
menu for computer
source.
AV System Menu
Image Adjust Menu
Used to select system
of selected video
source. (p.36)
Used to adjust picture image.
[Contrast / Brightness / Color / Tint
/ Color temp. / White balance (R/
G/B) / Sharpness / Gamma / Noise
reduction / Progressive ] (p.38-39)
Same function
as computer
menu.
21
Basic Operation
Input Menu
Basic Operation
Zoom and Focus Adjustment
Rotate the Zoom Ring to zoom in and out.
Rotate the Focus Ring to adjust the projected picture
focus.
Focus Ring
(Front)
Zoom Ring
(Rear)
Keystone Correction
If a projected picture has keystone distortion, correct
the image with Keystone adjustment.
Press the KEYSTONE button on the top control or on
the remote control. The keystone dialog box appears.
Correct keystone distortion by pressing the Point ed
buttons. Keystone adjustment can be memorized.
(p.41)
Reduce the upper width
with Point e button.
•The arrows are white when there is no
correction.
•The direction of the arrow being corrected
turns red.
•The arrows disappear at the maximum
correction.
•If you press the KEYSTONE button on the
top control or on the remote control once
more while the keystone dialog box is
being displayed, the keystone adjustment
is canceled.
Reduce the lower width
with Point d button.
Top Control
KEYSTONE button
POINT ed buttons
Remote Control
KEYSTONE button
POINT ed buttons
22
Basic Operation
Sound Adjustment
Direct Operation
Top Control
Volume
VOLUME+/buttons
Press the VOLUME+/– buttons on the top control or on
the remote control to adjust the volume. The volume
dialog box appears on the screen for a few seconds.
Mute
Remote Control
Press the MUTE button on the remote control to cut off
the sound. To restore the sound to its previous level,
press the MUTE button again or press the VOLUME
+/– buttons.
Mute function is also effective for AUDIO OUT jack.
VOL- button
VOL+ button
Menu Operation
1
Approximate
level of the
volume.
Press the Point ed buttons to move the red
framed pointer to the item that you want to select,
and then press the SELECT button.
Volume
Press the Point 8 button to turn up the volume, and
press the Point 7 button to turn down the volume.
Press the MUTE button to set the Mute
function On/Off. The display disappears after
4 seconds.
Sound Menu
Mute
Press the Point 7 8 buttons to cut off the sound.
Dialog box display changes to "On" and the sound is
cut off. To restore the sound to its previous level, press
the Point 7 8 buttons again.
Remote Control Operation
Sound Menu
icon
Approximate level of
the volume.
Exit the Sound Menu.
For some frequently used operations, using the remote control is advisable.
Just pressing one of the buttons enables you to make the operation, and no need for calling up the
On-Screen Menu.
COMPUTER/VIDEO buttons
Remote Control
COMPUTER/
VIDEO buttons
Press the COMPUTER or VIDEO button on the remote
control to select the input source. For more detail, see
pages 25, 34, and 35.
FREEZE button
FREEZE button
Press the FREEZE button on the remote control to
freeze the picture on the screen. To cancel the Freeze
function, press the FREEZE button again or press any
other button.
✔ Note:
See the next page for the other
buttons.
23
Basic Operation
2
MUTE button
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the Sound Menu icon.
Basic Operation
AUTO PC button
Remote Control
Press the AUTO PC button on the remote control to
operate the Auto PC function. For more detail, see
page 27.
VOLUME +/- buttons
(See p.23.)
KEYSTONE button
(See p.22)
D.ZOOM buttons
POINT ed buttons
Press the D.ZOOM buttons on the remote control to
zoom in and zoom out the images. For more detail,
see page 33.
AUTO PC button
IMAGE button
NO SHOW button
P-TIMER button
Press the NO SHOW button on the remote control to
black out the image. To restore to normal, press the
NO SHOW button again or press any other button.
When a projected image is captured and set as "User"
in the Logo selection (p.42), the screen changes each
time you press the NO SHOW button as follows.
NO SHOW button
✔ Note:
black out ➜ the captured image ➜ normal ➜
S ee the previous page for the
other buttons.
•••••
LAMP CONTROL
button
D.ZOOM buttons
KEYSTONE button
For detail, see page 22.
IMAGE button
Press the IMAGE button on the remote control to select
a desired image level of the screen. For more detail,
see pages 30 and 37.
The message disappears after 4 seconds.
P-TIMER button
Press the P-TIMER button on the remote control. The
timer display "00 : 00" appears on the screen and the
timer starts to count time (00 : 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. Press
the P-TIMER button again, then the P-timer display
disappears.
LAMP CONTROL button
Press the LAMP CONTROL button on the remote
control to select the lamp mode for changing the
brightness of the screen.
Normal. . . normal brightness
Auto. . . . . brightness according with the input
signal
Eco........... lower brightness reduces the lamp
power consumption and extends the
lamp life.
24
P-Timer display
Computer Input
Input Source Selection
Direct Operation
Top Control
INPUT button
Choose either Computer 1 or Computer 2 by pressing
the INPUT button on the top control or press the
COMPUTER button on the remote control. Before
using these buttons, correct input source should be
selected through Menu operation as described below.
INPUT button
Computer 1
Computer 2 ✳
Video
Remote Control
COMPUTER button
COMPUTER button
Computer 1
Computer 2 ✳
✳ See Note at the bottom of this page.
Menu Operation
1
Input Menu
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the Input Menu icon.
Press the Point ed buttons to move the red
arrow pointer to either Computer 1 or Computer
2, and then press the SELECT button.
3
After the Source Select Menu appeared for
Computer 1, move the pointer to RGB and then
press the SELECT button.
Move the pointer (red
arrow) to Computer 1 and
press the SELECT button.
Computer
1
Computer Input
2
Input Menu icon
Source Select Menu
Move the pointer to RGB
and press the SELECT
button.
Input Menu
✔ Note:
•When the Input Search function is set On1
or On2, the input signal will be searched
automatically (p.45)
•C o m p u t e r 2 i s n o t d i s p l a y e d w h e n t h e
COMPUTER IN 2/MONITOR OUT terminal is set
as Monitor out. (p.46)
•Computer 2 (COMPUTER IN 2/MONITOR OUT)
can accept only RGB signal.
Move the pointer (red
arrow) to Computer 2 and
press the SELECT button.
25
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA,
SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is
selected as a signal source, this projector automatically detects the signal format and tunes to
project a proper image without any additional setting. (Signal formats provided in this projector is
shown on page 61)
One of the following messages may appear when:
Auto
The projector cannot recognize the
connected signal conforming to the
provided PC Systems. The message "Auto"
is displayed on the PC System Menu icon
and the Auto PC Adjustment function works
to display proper images. If the image is
not projected properly, a manual adjustment
is required. (p.28, 29)
-----
There is no signal input from computer.
Check the connection between your
c o m p u t e r a n d t h e p r o j e c t o r. ( S e e
"Troubleshooting" on page 56.)
Mode 1
The preset system is manually adjusted in
the PC Adjust Menu. The adjusted data can
be stored in Mode 1 ~ 5. (p.28, 29)
SVGA 1
PC Systems provided in this projector is
chosen. The projector chooses a proper
system provided in the projector and
displays it.
PC System Menu
The Auto PC Adjustment
function operates to adjust
the projector.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC System Menu
PC system can also be selected manually.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the PC System Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to the system that you want to set, and then
press the SELECT button.
The PC System Menu icon
Selected system is displayed.
Systems on this dialog
box can be selected.
Custom Mode (1 ~ 5) set in the
PC Adjust Menu. (p.27, 29)
26
Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal,
and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.
Direct Operation
Remote Control
The Auto PC adjustment function can be operated
directly by pressing the AUTO PC button on the remote
control unit.
Menu Operation
AUTO PC button
PC Adjust Menu
Auto PC Adj.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to PC Adjust Menu item.
2
Press the Point ed buttons to move the red
framed pointer to Auto PC Adj. item and then
press the SELECT button twice.
Move the red framed pointer to
the Auto PC Adj. item and press
the SELECT button.
"Please wait..." message appears
while Auto PC adjustment is in
process.
Computer Input
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can
be memorized in this projector. Once parameters are
memorized, the setting can be done just by selecting
Mode in the PC System Menu (p.26). See "Store" on
page 29.
PC Adjust Menu icon
✔ Note:
•Fine sync, Total dots, Horizontal, and Vertical of
some computers cannot be fully adjusted with this
Auto PC Adjustment function. When the image is
not provided properly with this operation, manual
adjustments are required. (p.28, 29)
•The Auto PC Adjustment cannot be operated when
480i, 575i, 480p, 575p, 720p,1035i, or 1080i is
selected in the PC System Menu. (p.26)
27
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system
of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to
match those signal formats. The projector has 5 independent memory areas to memorize those
parameters manually adjusted. It allows you to recall the setting for a specific computer.
PC Adjust Menu icon
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the PC Adjust Menu icon.
2
Press the Point ed buttons to move the red
framed pointer to the item that you want to adjust
and then press the SELECT button to display
the adjustment dialog box. Press the Point 7 8
buttons to adjust the value.
PC Adjust Menu
Move the red framed
pointer to an item and press
the SELECT button.
Fine sync
Eliminate flicker from the image displayed. Press the
Point 7 8 buttons to adjust the value. (From 0 to 31.)
Total dots
Status (Stored/Free)
of the selected Mode.
Selected Mode
Adjust the number of total dots in one horizontal period.
Press the Point 7 8 buttons to adjust number to match
your PC image.
Horizontal
Press the Point 7 8 buttons to adjust the horizontal
picture position.
Vertical
Press the Point 7 8 buttons to adjust the vertical
picture position.
Press the Point 7 8
buttons to adjust the
value.
Press the SELECT
button at this item to
adjust other items.
Current mode
Press the SELECT button to show H-sync freq. and
V-sync freq. of the connected computer.
Clamp
Adjust clamp level. When the image has dark bars, try
this adjustment.
Press the SELECT button
at the Current mode item to
show the information of the
connected computer.
28
Computer Input
Display area H
Adjust the horizontal area displayed by this projector.
Press the Point 7 8 buttons to decrease/increase the
value.
Display area V
Adjust the vertical area displayed by this projector.
Press the Point 7 8 buttons to decrease/increase the
value.
Reset
Move the red framed
pointer to an item and
press the SELECT button.
To reset the adjusted data, select Reset and press
the SELECT button. The confirmation box appears
and then select [Yes]. All adjustments return to their
previous figures.
This Mode has stored parameters.
Mode free
To clear adjusted data
To clear the stored data, move the red framed pointer
to the Mode free item and then press the SELECT
button. Move the red arrow pointer to the Mode that
you want to clear and then press the SELECT button.
Store
Quit
Vacant Mode
Values of "Total dots",
"Horizontal", "Vertical",
"Display area H" and
"Display area V".
Computer Input
To store adjusted data, move the red framed pointer
to the Store item and then press the SELECT button.
Move the red arrow pointer to any of Mode 1 to 5 in
which you want to store and then press the SELECT
button.
To store adjusted data
Exit the PC Adjust Menu.
✔ Note:
Display area (H/V) cannot be selected when 480i,
575i, 480p, 575p, 720p, 1035i, or 1080i is selected
in the PC System Menu (p.26).
Close this dialog box.
29
Computer Input
Image Level Selection
Direct Operation
Select an image level among Dynamic, Standard, Real,
Blackboard (Green), Image 1, Image 2, Image 3, and
Image 4 by pressing the IMAGE button on the remote
control.
Dynamic
Picture level suitable for viewing picture in a bright
room.
Standard
Normal picture level preset on this projector.
Remote Control
IMAGE button
IMAGE button
Dynamic
Standard
Real
Real
Picture level with improved halftone for graphics.
Blackboard (Green)
Blackboard (Green)
Picture level suitable for the image projected on a
blackboard. This mode assists to enhance the image
projected on a blackboard. This is mainly effective on
a green colored board, not truly effective on a black
colored board.
Image 1 ~ 4
User preset image in the Image Adjust Menu. (p.32)
Image 1
Image 2
Image 3
Image 4
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the Image Select Menu icon.
2
Press the Point ed buttons to move the red
framed pointer to the level that you want to set and
then press the SELECT button.
Image Select Menu icon
Image Select Menu
Dynamic
Picture level suitable for viewing picture in a bright
room.
Standard
Move the red framed
pointer to the level and
press the SELECT button.
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard (Green)
Picture level suitable for the image projected on a
blackboard. See above for further description.
Image 1 ~ 4
User preset image in the Image Adjust Menu. (p.32)
30
The level being selected.
Computer Input
Image Level Adjustment
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the Image Adjust Menu icon.
2
Press the Point ed buttons to move the red
framed pointer to the item that you want to adjust,
and then press the SELECT button. The level
of each item is displayed. Adjust each level by
pressing the Point 7 8 buttons.
Image Adjust Menu
Image Adjust Menu icon
Move the red framed
pointer to the item to be
selected and then press
the SELECT button.
Contrast
Press the Point 7 button to decrease the contrast and
the Point 8 button to increase contrast. (From 0 to 63.)
Brightness
Press the Point 7 button to adjust the image darker
and the Point 8 button to adjust the image brighter.
(From 0 to 63.)
Selected Image level
Color temp.
Press the Point 7 button or the Point 8 button for Color
temp. level that you want to select. (XLow, Low, Mid, or
High)
Press the Point 7 8
buttons to adjust the
value.
White balance (Red)
Press the Point 7 button to lighten the red tone and the
Point 8 button to deepen the red tone. (From 0 to 63.)
White balance (Green)
Computer Input
Press the Point 7 button to lighten the green tone and
the Point 8 button to deepen the green tone. (From 0
to 63.)
White balance (Blue)
Press the Point 7 button to lighten the blue tone and
the Point 8 button to deepen the blue tone. (From 0 to
63.)
Sharpness
Press the Point 7 button to soften the image and the
Point 8 button to sharpen the image. (From 0 to 15.)
✔ Note:
After adjusting any of the White
balance Red, Green, or Blue, the
Color temp changes to "Adj.".
Gamma
Press the Point 7 8 buttons to obtain better balance of
contrast. (From 0 to 15.)
Reset
To reset the adjusted data, select Reset and press
the SELECT button. The confirmation box appears
and then select [Yes]. All adjustments returns to their
previous figures.
31
Computer Input
Store
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with
the Point ed buttons and press the SELECT button. A
confirmation box appears and then select [Yes].
Stored data can be called up by selecting "Image" in
the Image Level Selection on page 30.
Move the red framed
pointer to any of
Image 1 to 4 where
you want to set
and then press the
SELECT button.
Quit
Exit the Image Adjust Menu.
Store item
Press the SELECT
button at this item to
store the adjusted data.
The confirmation
box appears,
then select [Yes].
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image
size.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the Screen Menu icon.
2
Press the Point ed buttons and move the red
framed pointer to the function that you want to
select and then press the SELECT button.
Normal
Screen Menu
Screen Menu icon
Move the red framed pointer
to the function and press the
SELECT button.
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768 ),
this projector enters panning mode automatically. Pan
the image with Point ed 7 8 buttons. When adjusted,
the arrows turns red. When reached to the correction
limit, the arrows disappears.
Wide
Provide the image to fit wide video aspect ratio (16:9)
by expanding the image width uniformly. This function
can be used for providing a squeezed video signal at
16:9.
Full screen
Provide the full screen image.
32
✔ Note:
•T h i s S c r e e n M e n u c a n n o t b e
operated when 720p(HDTV), 1035i
(HDTV), or 1080i (HDTV) is selected
in the PC System Menu (p.26).
•The projector cannot display any
resolution higher than 1280x1024.
If your computer’s screen resolution
is higher than it, reset the resolution
to the lower before connecting to the
projector.
•The image data in other than XGA
(1024x768) is modified to fit the
screen size in initial mode.
•True, Full screen, and Digital zoom
+/– cannot be selected when 480i,
575i, 480p, or 575p is selected in
the PC System Menu (p.26).
Computer Input
For zooming in and out the images
Remote Control
Digital zoom +
POINT buttons
When the Digital zoom + is selected, the On-Screen
Menu disappears and the message "D. zoom +" is
displayed. Press the SELECT button to expand the
image size. And press the Point ed 7 8 buttons to
pan the image. The Panning function can work only
when the image is larger than the screen size.
SELECT button
D.ZOOM + button
A projected image can be also expanded by pressing
the D.ZOOM e button on the remote control.
D.ZOOM - button
Digital zoom –
When Digital zoom – is selected, the On-Screen Menu
disappears and the message "D. zoom –" is displayed.
Press the SELECT button to compress image size.
A projected image can be also compressed by pressing
the D.ZOOM d button on the remote control.
To exit the Digital zoom +/– mode, press any button
except the D.ZOOM ed buttons, SELECT, and Point
buttons.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment or select an input
source from the Input Source Selection (p.25) again, or
adjust the screen size with the D.ZOOM ed buttons.
✔ Note:
•T h e p a n n i n g f u n c t i o n m a y n o t
operate properly if the stored Mode
in the PC Adjust Menu is used.
(p.29)
•The minimum compression ratio
can be limited depending on the
input signal or when the Keystone
function is working.
• True, Full screen, and Digital zoom
+/– cannot be selected when 480i,
575i, 480p, or 575p is selected in
the PC System Menu (p.26).
•Digital zoom +/- cannot be selected
when Full screen or True is selected.
Computer Input
33
Video Input
Input Source Selection (Video, S-Video)
Direct Operation
Top Control
INPUT button
Choose Video by pressing the INPUT button on the top
control or the VIDEO button on the remote control.
Before using these buttons, correct input source should
be selected through menu operation as described
below.
INPUT button
Video
Computer 1
Computer 2 ✳
✳ See Note at the bottom of this page.
Remote Control
VIDEO button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
framed pointer to the Input Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to Video and then press the SELECT button
to display the Source Select Menu.
3
Move the pointer to the source that you want to
select and then press the SELECT button.
Input Menu icon
Input Menu
Move the pointer to
Video and press the
SELECT button.
Video
Auto
When selecting Auto, the projector
automatically detects the incoming video
signal, and adjusts itself to optimize its
performance. The projector selects a
connection in the following order:
1. S-Video
2. Video
Video
When video input signal is connected to the
VIDEO jack, select Video.
S-Video
When video input signal is connected to the
S-VIDEO jack, select S-Video.
✔ Note:
•When the Input Search function is set On1 or On2,
the input signal will be searched automatically
(p.45)
•When Monitor out is selected in the Terminal
function (p.46), Computer 2 is not displayed.
34
Source Select Menu (VIDEO)
Move the pointer to the
source that you want
to select and press the
SELECT button.
Video Input
Input Source Selection (Component, RGB Scart 21-pin)
Direct Operation
Top Control
INPUT button
Choose Computer 1 by pressing the INPUT button on
the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should
be selected through Menu operation as described
below.
INPUT button
Computer 1
Computer 2 ✳
Video
Remote Control
COMPUTER button
COMPUTER button
Computer 1
Computer 2 ✳
Menu Operation
1
2
3
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the Input Menu icon.
✳ See Note at the bottom of this page.
Input Menu icon
Input Menu
Press the Point ed buttons to move the red arrow
pointer to Computer 1 and then press the SELECT
button.
After the Source Select Menu appeared for
Computer 1, move the pointer to Component or
RGB (Scart) and then press the SELECT button.
Component
RGB (Scart)
When the input source is coming from
video equipment connected to the
COMPUTER IN 1/COMPONENT IN
terminal with a Component-VGA Cable,
select Component.
Move the pointer (red
arrow) to Computer 1 and
press the SELECT button.
Computer
1
Source Select Menu
Move the pointer to RGB
and press the SELECT
button.
Video Input
When the input source is coming
from video equipment connected to
the COMPUTER IN 1/COMPONENT
IN terminal with a Scart-VGA Cable,
select RGB (Scart).
✔ Note:
•When the Input Search function is set On1 or On2,
the input signal will be searched automatically
(p.45)
•C o m p u t e r 2 i s n o t d i s p l a y e d w h e n t h e
COMPUTER IN 2/MONITOR OUT terminal is set
as Monitor out. (p.46)
35
Video Input
Video System Selection
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the AV System Menu icon.
2
Press the Point ed buttons to move the red arrow
pointer to the system that you want to select and
then press the SELECT button.
Video or S-Video
AV System Menu (Video or S-Video)
Auto
The projector automatically detects incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system
manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
it is necessary to select a specific broadcast signal
format among PAL, SECAM, NTSC, NTSC 4.43,
PAL-M, and PAL-N.
Component
AV System Menu icon Selected system is displayed.
Move the pointer to a
system and press the
SELECT button.
AV System Menu (Component)
Auto
The projector automatically detects incoming video
signal, and adjusts itself to optimize its performance.
AV System Menu icon Selected system is displayed.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image,
it is necessary to select a specific component video
signal format among 480i, 575i, 480p, 575p, 720p,
1035i, and 1080i.
✔ Note:
The AV System Menu cannot be selected when
selecting RGB (Scart).
36
Move the pointer to a
system and press the
SELECT button.
Video Input
Image Level Selection
Direct Operation
Select an image level among Dynamic, Standard,
Cinema, Blackboard (Green), Image 1, Image 2, Image
3, and Image 4 by pressing the IMAGE button on the
remote control.
Dynamic
Picture level suitable for viewing picture in a bright
room.
Standard
Normal picture level preset on this projector.
Remote Control
IMAGE button
IMAGE button
Dynamic
Standard
Cinema
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard (Green)
Blackboard (Green)
Picture level suitable for the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Image 1
Image 2
Image 1 ~ 4
User preset image in the Image Adjust Menu (p.38, 39).
Image 3
Image 4
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the Image Select Menu icon.
2
Press the Point ed buttons to move the red
framed pointer to the level that you want to set and
then press the SELECT button.
Image Select Menu icon
Image Select Menu
Dynamic
Picture level suitable for viewing picture in a bright
room.
Standard
Move the red framed
pointer to the level and
press the SELECT button.
Normal picture level preset on this projector.
Video Input
Cinema
Picture level adjusted for the picture with fine tone.
Blackboard (Green)
Picture level suitable for the image projected on a
blackboard. See above for further description.
The level being selected.
Image 1~4
User preset image in the Image Adjust Menu (p.38, 39).
37
Video Input
Image Level Adjustment
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the Image Adjust Menu icon.
2
Press the Point ed buttons to move the red
framed pointer to the item that you want to adjust,
and then press the SELECT button. The level
of each item is displayed. Adjust each level by
pressing the Point 7 8 buttons.
Image Adjust Menu
Image Adjust Menu icon
Move the red framed
pointer to the item to be
selected and then press
the SELECT button.
Contrast
Press the Point 7 button to decrease the contrast and
the Point 8 button to increase contrast. (From 0 to 63.)
Brightness
Press the Point 7 button to adjust the image darker
and the Point 8 button to adjust the image brighter.
(From 0 to 63.)
Color
Press the Point 7 button to lighten the color and the
Point 8 button to deepen the color. (From 0 to 63.)
Tint
Press the Point 7 8 buttons to obtain a proper color.
(From 0 to 63.)
Color temp.
Press the Point 7 8
buttons to adjust the
value.
Press the SELECT
button at this item to
display other items.
Press the Point 7 button or the Point 8 button for Color
temp. level that you want to select.
(XLow, Low, Mid, or High)
White balance (Red)
Press the Point 7 button to lighten the red tone and the
Point 8 button to deepen the red tone.
(From 0 to 63.)
White balance (Green)
Press the Point 7 button to lighten the green tone and
the Point 8 button to deepen the green tone.
(From 0 to 63.)
White balance (Blue)
Press the Point 7 button to lighten the blue tone and
the Point 8 button to deepen the blue tone.
(From 0 to 63.)
✔ Note:
•The Tint cannot be selected when the video
system is PAL, SECAM, PAL-M, or PAL-N.
•After adjusting any of the White balance Red,
Green, or Blue, the Color temp. changes to "Adj.".
38
Press the SELECT
button at this item to
display previous items.
Video Input
Sharpness
Press the Point 7 button to soften the image and the
Point 8 button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point 7 8 buttons to obtain better balance of
contrast. (From 0 to 15.)
Noise reduction
Noise interference on the screen can be reduced.
Select one of the following to get smoother images.
Off . . . . disabled.
L1 . . . . lower reduction
L2 . . . . higher reduction
Progressive
Interlaced video signal can be displayed in a
progressive picture. Select one of the following.
Off . . . . disabled.
L1 . . . . Select "L1" for an active picture.
L2 . . . . Select "L2" for a still picture.
Film . . . Select "Film" for watching a film. With this
function, the projector reproduces pictures
faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and press
the SELECT button. The confirmation box appears
and then select [Yes]. All adjustments returns to their
previous figures.
Store
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with
the Point ed buttons and press the SELECT button. A
confirmation box appears and then select [Yes].
Stored data can be called up by selecting "Image" in
the Image Level Selection on page 37.
Store item
Image Level Menu
Move the red framed pointer
to an image item to be set
and then press the SELECT
button.
The confirmation box
appears and then select
[Yes].
Video Input
Quit
Exit the Image Adjust Menu.
✔ Note:
Noise reduction and Progressive cannot be
selected when 480p, 575p, 720p, 1035i, or 1080i
is selected. (p.36)
39
Video Input
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image
size.
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the Screen Menu icon.
2
Press the Point ed buttons and move the red
framed pointer to the function that you want to
select and then press the SELECT button.
Normal
Provide the image at a normal video aspect ratio of 4:3.
Wide
Provide the image at a wide screen ratio of 16:9.
✔ Note:
Screen Menu cannot be operated when 720p,
1035i, or 1080i is selected in the AV System Menu
(p.36).
40
Screen Menu
Screen Menu icon
Move the red framed pointer to a
function and press the SELECT
button.
Setting
Setting
1
Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the
red framed pointer to the Setting Menu icon.
2
Press the Point ed buttons to move the red
framed pointer to the item that you want to set and
then press the SELECT button. The Setting dialog
box appears.
Language
Setting Menu (Language)
Setting
This projector has Setting menu that allows you to set
up the other various functions described as follows:
Setting Menu icon
Set the red framed pointer
to the item and press the
SELECT button.
Press the SELECT
button at Language
item, the Language
Menu appears.
The language used in the On-Screen Menu is
available in English, German, French, Italian, Spanish,
Portuguese, Dutch, Swedish, Finnish, Polish,
Hungarian, Romanian, Russian, Chinese, Korean, or
Japanese.
Keystone
This function corrects distortion of a projected image.
Select either Store or Reset with the Point 7 8 buttons,
and then press the SELECT button. The keystone
dialog box appears. Correct keystone with the Point
ed buttons. (p.22)
Store . . . . . store the keystone correction even when
the AC power cord is unplugged.
Reset . . . . . reset the keystone correction when the
AC power cord is unplugged.
Press the SELECT
button at this item
to display the other
languages.
Blue back
Press the Point 7 8 buttons to switch On/Off. When
this function is "On", a blue image is displayed while
the input signal is not detected.
Press the SELECT
button at this item to
close the dialog box.
41
Setting
Display
Press the Point 7 8 buttons to switch On/Off. This
function decides to display On-Screen Displays.
On . . . . . . . . . . . . . Show all the On-Screen Displays.
Use this function when you want
to project images after the lamp
becomes bright enough. Factory
default setting is this mode.
Countdown off . . . . Show the input image instead of
the countdown when turning on
the projector. Use this function
when you want to project the
image as early as possible even
when the lamp is not bright
enough.
Off . . . . . . . . . . . . . Do not show On-Screen Displays,
except;
●On-Screen Menu
●"Power off?" message
●P-Timer
●"No signal" message for Power management item
(p.46)
●"Please wait..." message
●White arrows for True item in the Screen Menu
(p.32)
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo
with Logo select, Capture, and Logo PIN code lock
functions.
✔ Note:
When On is selected in Logo PIN code lock
function, Logo select and Capture functions
cannot be selected.
Logo select
Logo select
This function decides the start-up display as follows:
User . . . . the image you captured
Default . . the factory-set logo
Off . . . . . . countdown only
42
Setting
Capture
Setting
This function enables you to capture the image
being projected and use it for a start-up display or
interval of presentations.
After capturing the projected image, go to the
Logo select function and set it to "User". Then
the captured image is displayed when turning on
the projector next time or pressing the NO SHOW
button. (p.24)
To capture the image, select [Yes]. To cancel the
Capture function, select [No].
Capture
Select [Yes] to capture the
projected image.
✔ Note:
•Before capturing an image, select Standard
in the Image Select Menu to capture a proper
image. (p.30, 37.)
•A signal from a computer can be captured
up to XGA (1024x768). A signal from video
equipment can be captured except for 720p,
1035i, and 1080i.
•When capturing the image that has been
adjusted by the Keystone function, the
adjustment data is automatically reset and the
projector captures an image without keystone
adjustment.
•When the Logo PIN code lock function is "On",
Capture menu cannot be selected.
•When starting to capture a new image, the
previously stored image is cleared even if you
cancel the capturing.
Logo PIN code lock
Select [Yes] to stop
capturing.
Logo PIN code lock
This function prevents an unauthorized person from
changing the screen logo.
Off . . . . . . . the screen logo can be changed
freely from the Logo select menu.
(p.42)
On . . . . . . . the screen logo cannot be changed
without the Logo PIN code.
If you want to change the Logo PIN code lock
setting, enter a Logo PIN code along the following
steps. The initial Logo PIN code is set "4321" at the
factory.
43
Setting
To Enter the Logo PIN code
Select a number by pressing the Point ed buttons.
And then press the Point 8 button to fix the number
and move the pointer. The number changes to "✳".
If you fixed an incorrect number, move the pointer
to the number you want to correct by pressing the
Point 7 button, and then select the correct number
by pressing the Point ed buttons.
Logo PIN code lock Dialog Box
After a correct Logo PIN code is entered, the
following dialog box appears.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the
pointer to "Set" by pressing the Point 8 button.
Press the SELECT button so that you can change
the Logo PIN code lock setting.
If you entered an incorrect Logo PIN code, "Logo
PIN code" and the number (✳✳✳✳) turns red. Enter
a correct Logo PIN code all over again.
To Change the Logo PIN code
Logo PIN code can be changed to your desired
four-digit number. Select "Logo PIN code change"
with the Point d button and press the SELECT
button. Set a new Logo PIN code.
Be sure to note the new Logo PIN code and keep it
at hand. If you lost the number, you could no longer
change the Logo PIN code setting. For details on
PIN code setting, refer to relevant instructions of the
PIN code lock function on pages 48 and 49.
caution:
when y ou have changed THE LOGO PIn
code, write down the new pin code
in column of the LOGO pin code no.
memo on page 65, and keep it securely.
should the LOGO pin code be lost or
forgotten , the pro j ector can no
longer be operated.
44
Select On/Off by pressing the Point 7 8
buttons or change the Logo PIN code.
Setting
Ceiling
Ceiling
Setting
When this function is "On", the picture is top/bottom
and left/right reversed. This function is used to project
the image from a ceiling mounting the projector.
Rear
When this function is "On", the picture is left/right
reversed. This function is used to project the image to
a rear projection screen.
Rear
Input search
This function detects the input signal automatically.
When finding a signal, the search will stop. Use the
Point 7 8 buttons to select one of the following.
Off . . . . . Input search does not work.
On1 . . . . Input search works under the situation
below.
• When pressing the INPUT button on the
top control.
• When pressing the COMPUTER button or
VIDEO button on the remote control.
On2 . . . . Input search works under the situation
below.
• W h e n t u r n i n g o n t h e p r o j e c t o r w i t h
pressing the POWER ON-OFF button on
the top control or on the remote control.
• When pressing the COMPUTER button or
VIDEO button on the remote control.
• When missing the current input signal. ✳
• When pressing the INPUT button on the
top control.
✳ It is not available when On-Screen menu is displayed.
✔ Note:
•While Input search is set On1 or On2, the status of Input and Lamp are displayed every time the
signal is switched.
•Only the input source selected at the last time can be detected.
•After searching every input signal and still can not detect any signal, Input search will operate
like below:
– When pressing the INPUT button, Input search will select input source other than previous one.
– When pressing the COMPUTER button, Input search will stop at the previous COMPUTER input (either Computer 1 or Computer 2 ).
– When pressing the VIDEO button, Input search will stop at Video.
•If any of the INPUT button on the top control or COMPUTER/VIDEO button on the remote
control is pressed while Input search is on, Input search will stop and go back to the previous
input signal.
45
Setting
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the
back of the projector is switchable for computer input
or monitor output. (See page 9) Select Computer 2 or
Monitor Out with the Point 7 8 buttons.
Computer 2 . . . . . . computer input
Monitor Out . . . . . . monitor out
Terminal function is not available when selecting
Computer 2 to the input source. Change the input
source to the others (Computer1 or Video) so that the
Terminal function will be available. (p.25, 34, 35)
Power management
For reducing power consumption as well as
maintaining the lamp life, the Power management
function turns off the projection lamp when the
projector is not used for a certain period.
When the input signal is interrupted and no button is
pressed for more than 30 seconds, the timer display
with "No signal" appears. The countdown starts to turn
off the lamp.
Power management
Time left before Lamp is off.
Select one of the operations:
Ready . . . . . . . . When the lamp has been fully
cooled down, the POWER indicator
changes to green blinking. In
this condition, the projection lamp
is turned on if the input signal is
reconnected or any button on the
top control or remote control is
pressed.
Shut down . . . . . When the lamp has been fully
cooled down, the power is turned
off.
Off . . . . . . . . . . . Power management function is off.
Then set the countdown timer with the Point 7 8
buttons.
46
Press the SELECT button
at Power management and
this box appears. Choose
one of three settings with
the Point 7 8 buttons, and
go to the timer with the
Point ed buttons and set
time with the Point 7 8
buttons.
Setting
On start
On start
Setting
When this function is "On", the projector is
automatically turned on just by connecting the AC
power cord to a wall outlet.
✔ Note:
•Be sure to turn the projector off properly (see
"Turning Off the Projector" on page 19). If the
projector is turned off in the incorrect sequence,
the On start function does not operate properly.
Lamp control
This function allows you to change brightness of the
screen.
Normal . . . . . normal brightness
Auto . . . . . . . brightness according with the
input signal
Eco��������������� lower brightness reduces the lamp
power consumption and extends
the lamp life.
Remote control
This projector provides two different remote control
codes: the factory-set initial code (Code 1) and the
secondary code (Code 2). This switching function
prevents remote control interference when operating
several projectors or video equipment at the same
time.
When operating the projector in "Code 2", both the
projector and the remote control must be switched to
"Code 2".
Remote control
Press and hold
MENU and
IMAGE buttons
for more than
10 seconds.
To change the code for the projector:
Select either "Code 1" or "Code 2" in this Setting Menu.
To change the code for the remote control:
Press and hold both the MENU and IMAGE buttons
together for 10 seconds or more. After changing the
code, make sure the remote control operates properly.
47
Setting
Security (Key lock and PIN code lock settings)
Key lock
This function allows you to use Key lock and PIN
code lock function to set the security for the projector
operation.
Key lock
This function locks operation of the top control or
the remote control.
It is useful to prevent operation by an unauthorized
person.
Select Key lock. Choose
one of the alternatives with
the Point ed buttons and
select [Yes] to activate it.
���������� not locked.
���������� lock the operation of the top
control. To unlock, use the
remote control.
���������� lock the operation of the
remote control. To unlock,
use the top control.
If the top control accidentally becomes locked and
you do not have the romote control or there is
something wrong with your remote control, contact
the dealer where you purchased the projector or the
service center.
PIN code lock
PIN code lock
This function prevents the projector from being
operated by an unauthorized person and provides
the following settings for security options.
Off . . . . . . the projector is not locked with a
PIN code.
On1 . . . . . require to enter a PIN code every time
turning on the projector.
On2 . . . . . require to enter a PIN code to operate
the projector once the power cord
is disconnected; as long as the AC
power cord is connected, the projector
can be operated without a PIN code.
Whenever to change the PIN code lock setting
or the PIN code (the four-digit number), you are
required to enter the PIN code. The "1234" is set as
the initial PIN code at the factory.
48
When the projector is locked
with the PIN code, the PIN
code lock mark appears on the
menu bar.
Setting
To Enter the PIN code
Enter a PIN code
Setting
Select a number by pressing the Point ed buttons.
And then press the Point 8 button to fix the number
and move the pointer. The number changes to "✳".
If you fixed an incorrect number, move the pointer
to the number you want to correct by pressing the
Point 7 button, and then select the correct number
by pressing the Point ed buttons.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the
pointer to "Set" by pressing the Point 8 button.
Press the SELECT button so that you can change
the following PIN code lock settings.
If you entered an incorrect PIN code, "PIN code"
and the number (✳✳✳✳) turns red. Enter a correct
PIN code all over again.
The input numbers change
to "✳" for security.
To Change the PIN code lock setting
Select Off, On1, or On2 with the Point 7 8 buttons
and then move the red framed pointer to "Quit" with
the Point d button. Press the SELECT button to
close the dialog box.
Move the pointer to "Set" by pressing
the Point 8 button. And then press
the SELECT button.
To Change the PIN code
The PIN code can be changed to your desired fourdigit number.
Select "PIN code change" with the Point d button,
and press the SELECT button to display the New
PIN code input dialog box.
Select a number by pressing the Point ed buttons.
And then press the Point 8 button to fix the number
and move the pointer. Repeat it to complete
entering a four-digit number. After entering the fourdigit number, move the pointer to "Set" by pressing
the Point 8 button. Then press the SELECT button.
cAUtiOn:
WHen yOU HAV e cHAnGeD THE PIn cODe,
WRite DOWn tHe neW pin cODe in cOLUMn
OF tHe pin cODe nO. MeMO On pAGe 65, AnD
Keep it secUReLy. IF yOU FORG et yOUR PIN
cODe, tHe pROj ectOR cAn nO LOnGeR Be
stARteD.
Change the PIN code lock setting
Select a desired setting with
the Point 7 8 buttons.
Change the PIN code
Select PIN code change and
press the SELECT button.
The New PIN code input
dialog box appears.
The input numbers are being
displayed for confirmation.
49
Setting
Fan
This function provides the following alternatives in the
cooling fans' operation after turning off the projector.
(p.19)
L1 . . . . . . normal operation
L2 . . . . . . slower and lower-sound than the normal
operation (L1), but it takes longer to cool
the projector down.
Lamp counter
This function is used to reset the lamp replacement
counter. When replacing the projection lamp, reset the
lamp replacement counter by using this function. See
page 55 for operation.
Factory default
This function returns all setting values except for the
user logo, PIN code lock, Logo PIN code lock, and the
lamp counter to the factory default settings.
Quit
Factory default
Select Factory default
and this box appears.
Select [Yes], and the
next box appears.
Exit the Setting Menu.
Select [Yes] to
activate it.
50
Maintenance and Cleaning
Warning Indicator
The WARNING indicator shows the state of the function which protects the projector. Check the
state of the WARNING indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING
indicator is blinking red.
Top Control
WARNING
blinking red
Top Control
WARNING
emit red light
Maintenance & Cleaning
When the temperature inside the projector reaches a
certain level, the projector is automatically shut down
to protect the inside of the projector. The POWER
indicator is blinking while the projector is being cooled
down. When the projector has cooled down sufficiently
(to its normal operating temperature), it can be turned
on again by pressing the POWER ON-OFF button.
✔ Note:
After the temperature inside the projector returns
to normal, the WARNING indicator still continues
to blink. When the projector is turned on again,
the WARNING indicator stops blinking.
Then check the matters below:
– Did you provide appropriate space for the projector
to be ventilated? Check the installing condition to
see if ventilation slots are not blocked.
– Is the projector not installed near the ventilation duct
of air-conditioning equipment which may be hot?
Install the projector away from the ventilation duct of
air-conditioning equipment.
– Are the air filters clean? Clean the air filters
periodically. (p.52)
The projector is shut down and the WARNING
indicator emits a red light.
When the projector detects an abnormal condition, it
is automatically shut down to protect the inside and
the WARNING indicator becomes red. In this case,
disconnect the AC power cord and reconnect it, and
then turn the projector on once again for check. If
the projector cannot be turned on and the WARNING
indicator emits a red light, disconnect the AC power
cord and contact the service station for check and
repair.
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE
AC POWER CORD CONNECTED UNDER THE
ABNORMAL CONDITION. IT MAY RESULT IN
FIRE OR ELECTRIC SHOCK.
51
Maintenance and Cleaning
Cleaning the Air Filters
Air filters prevent dust from accumulating on the optical elements inside the projector. Should the air
filters become clogged with dust particles, it will reduce cooling fans' effectiveness and may result in
internal heat build up and adversely affect the life of the projector. Clean the air filters following the
steps below.
1
Turn off the projector, and disconnect the AC power
cord from the AC outlet.
2
Turn over the projector and remove the air filters by
pulling the latches upward.
3
Clean the air filters with a brush or rinse them
softly.
4
When cleaning the air filters by rinsing, dry them
well. Replace the air filters properly. Make sure
that the air filters are fully inserted.
CAUTION
Do not operate the projector with the air filters
removed. Dust may accumulate on the optical
elements degrading picture quality.
Do not put small parts into the air intake vents. It
may result in malfunction of the projector.
RECOMMENDATION
We recommend avoiding dusty/smoky
environments when operating the projector.
Usage in these environments may cause a poor
image quality.
When using the projector under dusty or smoky
conditions, dust may accumulate on a lens, LCD
panels, or optical elements inside the projector. This
condition may degrade the quality of a projected
image. When the symptoms above are noticed,
contact your authorized dealer or service station for
proper cleaning.
Air filters
Pull up and remove.
✔ Note:
When reinserting this air filter, be
sure that the slit part is facing the
outer side.
Lens Cover
Attaching the Lens Cover
When moving this projector or while not using it over
an extended period of time, replace the lens cover.
Attach the lens cover according to the following
procedures.
1
2
Pass the string through a hole of the lens cover.
3
Attach the string with lens cover to a hole at the
bottom of the projector and secure it with a screw.
52
String for the lens
cover
Secure it to the
hole with a screw.
Turn over the projector and remove the screw with
a screwdriver.
Hole
Maintenance and Cleaning
Cleaning the Projection Lens
Follow these steps to clean the projection lens.
Disconnect the AC power cord before cleaning.
2
Softly wipe the projection lens with a cleaning
cloth that contains a small amount of non-abrasive
camera lens cleaner, or use lens cleaning paper
or a commercially available air blower to clean the
lens. Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents, or other harsh
chemicals might scratch the surface.
3
When the projector is not in use, replace the lens
cover.
Maintenance & Cleaning
1
Cleaning the Projector Cabinet
Follow these steps to clean the projector cabinet.
1
Disconnect the AC power cord before cleaning.
2
Softly wipe the projector body with a soft, dry
cleaning cloth. When it is heavily soiled, use a
small amount of mild detergent and finish with a
soft, dry cleaning cloth. Avoid using an excessive
amount of cleaner. Abrasive cleaners, solvents, or
other harsh chemicals might scratch the surface.
3
When the projector is not in use, put the projector
in an appropriate carrying case to protect it from
dust and scratches.
53
Maintenance and Cleaning
Lamp Replacement
When the life of the projection lamp of this projector
draws to an end, the LAMP REPLACE indicator emits
a yellow light. If this indicator lights yellow, replace the
lamp with a new one promptly.
Top Control
POWER WARNING LAMP REPLACE
NE
TO
YS
KE
FF
-O
CT
LE
SE
+
WARNING:
TURN OFF THE UV LAMP BEFORE
OPENING THE LAMP COVER
T
PU
IN
N
O
U
EN
M
This indicator is yellow when
the life of the projection lamp
draws to an end.
E
M
LU
VO
E
M
LU
O
-V
CAUTION
CAUTION
Allow a projector to cool, for at least 45
minutes before you open the Lamp cover.
The inside of the projector can become very
hot.
For continued safety, replace with a lamp of
the same type. Do not drop a lamp or touch
a glass bulb! The glass can shatter and
may cause injury.
Follow these steps to replace the lamp.
Screw
Lamp Cover
1
Turn off the projector and disconnect the AC power
cord. Allow the projector to cool for at least 45
minutes.
2
Remove the screw with a screwdriver, and remove
the lamp cover.
3
Remove 2 screws of the lamp with a screwdriver
and pull out the lamp by grasping the handle.
4
Replace the lamp with a new one and tighten the 2
screws back into position. Make sure that the lamp
is set properly. Replace the lamp cover and tighten
the screw.
Screw
Lamp
5
Connect the AC power cord to the projector and Screw
turn on the projector.
6
Reset the lamp replacement counter.
See "Lamp Replacement Counter" on the next
page .
Handle
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give
the following information to the dealer.
●Model No. of your projector
●Replacement Lamp Type No.
:PLC-XU74
:POA-LMP106
(Service Parts No. 610 332 3855)
54
Maintenance and Cleaning
Lamp Replacement Counter
Be sure to reset the Lamp replacement counter after the lamp is replaced. When the Lamp
replacement counter is reset, the LAMP REPLACE indicator stops lighting.
Turn the projector on, press the MENU button to
display the On-Screen Menu. Press the Point 7
8 buttons to move the red framed pointer to the
Setting Menu icon.
2
Press the Point ed buttons to move the red
framed pointer to the Lamp counter function and
then press the SELECT button. The first dialog
box appears and shows the total accumulated
time of the lamp usage and the reset option. If
you select "Reset", a "Lamp replacement counter
Reset?" message appears. Select [Yes] to
continue.
3
Another confirmation dialog box appears, select
[Yes] to reset the Lamp replacement counter.
✔ Note:
Do not reset the Lamp replacement counter
without implementation of lamp replacement. Be
sure to reset the Lamp replacement counter only
after replacing the lamp.
To reset the lamp counter,
move the pointer to
Reset and then press the
SELECT button. “Lamp
replacement counter
Reset?” dialog box is
displayed.
Select [Yes],
then another
confirmation
box appears.
Select [Yes] again
to reset the lamp
counter.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly.
Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee
of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than
other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up,
replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the
instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP
REPLACE indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime
draws to an end. Risk of explosion may differ according to the environment or conditions in which the
projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector's AC plug from the AC outlet immediately. Contact an authorized
service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure
that there are no broken shards or pieces of glass around the projector or coming out from the cooling air
circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of
the projector except those who are authorized trained technicians and who are familiar with projector service.
Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do
so, may result in an accident or injury caused by pieces of broken glass.
55
Maintenance & Cleaning
1
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
– Make sure you have properly connected the projector to peripheral equipment as described on
pages15-17.
– Make sure all equipment is connected to AC outlet and the power is turned on.
– When you operate the projector with a computer and it does not project an image, restart the
computer.
Problem
– Solutions
No power
– Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red.
– Wait 90-120 seconds after the projector is turned off to
restart the projector. The projector can be turned on after the
POWER indicator turns red. (See page 19.)
– Check the WARNING indicator. If the WARNING indicator
lights red, the projector cannot be turned on. (See page 51.)
– Check the projection lamp. (See page 54.)
– Unlock the Key lock function. (See page 48.)
Image is out of focus
– Adjust the focus of the projector. (See page 22.)
– Provide proper distance between the projector and the
projection screen. (See page 13.)
– Check the projection lens to see if it needs cleaning. (See
page 53.)
– Moving the projector from a cool to warm place may result in
moisture condensation on the projection lens. If this occurs,
leave the projector off and wait until condensation evaporates.
No image
– Check the connection between your computer or video
equipment and the projector. (See pages 15-17.)
– See if the input signal is correctly output from your computer.
For some laptop computers, you may need to change the
setting for the monitor output when connecting to a projector.
See your computer’s instruction manual for the setting.
– It takes about 30 seconds to display an image after turning on
the projector. See if the selected system is corresponding to
your computer or video equipment. (See pages 26 and 36.)
– Select a correct input source once again through menu
operation. (See pages 25, 34 and 35.)
– Make sure the temperature is not out of the specified
operating temperature (41°F ~ 95°F (5°C ~ 35°C)).
Image is Left/Right reversed
– Check the Ceiling/Rear function. (See page 45.)
– Check the Ceiling function. (See page 45.)
Image is Top/Bottom reversed
No sound
56
– Check audio cable connections from the audio input source.
– Adjust the audio source.
– Press the Volume + button. (See page 23.)
– Press the Mute button. (See page 23.)
Appendix
Some displays are not seen
– Check the Display item. (See page 42.)
during operations
PIN code dialog box appears at
the start-up
– PIN code lock is being set. Input a PIN code (1234 or numbers
you have set). (See pages 18, 48, and 49.)
Computer 2 cannot be selected
– Select Computer 2 at the Terminal function. (See page 46.)
The Terminal function cannot be
– The Terminal function cannot be selected after Computer
2 is selected. Select other input source such as Computer
1 or Video with the INPUT button on the top control, the
COMPUTER button or the VIDEO button on the remote
control so that the Terminal function can be selected.
selected
The Remote Control does not
work
WARNING:
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you
purchased the projector or the service center. Give the model number and explain about the
problem. We will advise you how to obtain service.
The CE Mark is a Directive
conformity mark of the
European Community (EC).
This symbol on the nameplate means
the product is Listed by Underwriters
Laboratories Inc. It is designed and
manufactured to meet rigid U.L. safety
standards against risk of fire, casualty and
electrical hazards.
Pixelworks ICs used.
57
Appendix
– Check the batteries.
– Make sure there is no obstruction between the projector and
remote control.
– Make sure you are not too far from the projector when using
the remote control. Maximum operating range is 16.4' (5 m).
– Make sure the code of the remote control is conformed to that
of the projector. (See page 47.)
– Unlock the Key lock function for the remote control. (See page
48.)
Appendix
Menu Tree
Computer Input/Video Input
Input
RGB
Go to System (1)
Component
Go to System (2)
RGB (Scart)
N/A
Computer 2
Quit
✽ N/A - - - not applicable
Video
Auto
Go to System (3)
Video
Go to System (3)
S-Video
Go to System (3)
Computer 1
Quit
Sound
Sound
Volume
0 - 63
Mute
On/Off
Quit
Computer Input
System (1)
Mode 1
Image Select
Dynamic
Mode 2
Standard
SVGA 1
Real
----
Blackboard (Green)
Image 1
✽Systems displayed in the System Menu vary
depending the input signal.
Image 2
Image 3
Image 4
PC Adjust
Auto PC Adj.
Fine sync.
0 - 31
Image Adjust
Contrast
0 - 63
Total dots
Brightness
0 - 63
Horizontal
Color temp.
High
Vertical
Current mode
H-sync freq.
Mid
Low
Clamp
V-sync freq.
XLow
Quit
Adj.
Display area - H
Red
0 - 63
Display area - V
Green
0 - 63
Reset
Yes/No
Blue
0 - 63
Mode free
Mode 1
Sharpness
0 - 15
Mode 2
Gamma
0 - 15
Mode 3
Reset
Yes/No
Mode 4
Store
Image 1
Store
Mode 5
Image 2
Quit
Image 3
Mode 1
Image 4
Mode 2
Quit
Mode 3
Quit
Mode 4
Mode 5
Quit
Quit
Screen
Normal
True
Wide
Full screen
Digital zoom +
Digital zoom –
58
Appendix
Video Input
Setting
System (2)
Setting
Auto
Language
German
1035i
French
720p
575p
480p
575i
480i
System (3)
Auto
PAL
SECAM
NTSC
NTSC 4.43
PAL-M
Keystone
Blue back
Display
Logo
PAL-N
Image Select
English
1080i
Dynamic
Standard
Cinema
Blackboard (Green)
Image 1
Image 2
Image 4
Image Adjust
On
Logo PIN code change
Quit
Contrast
Brightness
0 - 63
Color
0 - 63
Ceiling
On/Off
Tint
0 - 63
Color temp.
High
Rear
Input search
Terminal
On/Off
On1/On2/Off
Computer 2/Monitor out
Quit
0 - 63
Mid
Power management
Low
XLow
Adj.
Red
0 - 63
Green
0 - 63
Blue
0 - 63
On start
Lamp control
On/Off
Normal/Auto/Eco
Sharpness
0 - 15
Remote control
Code 1/Code 2
Gamma
0 - 15
Security
Key lock
Noise reduction
Off
Off
Projector
Remote Control
Quit
PIN code lock
PIN code lock
Off
On
PIN code change
Quit
Quit
L1
L2
Progressive
Off
L1
L2
Film
Reset
Yes/No
Store
Image 1
Image 2
Image 3
Fan
Lamp counter
Image 4
Quit
Quit
Screen
Off
Ready
Shut down
Timer (1-30 Min.)
Quit
Factory default
Quit
L1/L2
Hour(s)
Reset
Quit
Yes/No
Normal
Wide
59
Appendix
Image 3
Italian
Spanish
Portuguese
Dutch
Swedish
Finnish
Polish
Hungarian
Romanian
Russian
Chinese
Korean
Japanese
Quit
Store/Reset
On/Off
On/Countdown off/Off
Logo select
Off
Default
User
Capture
Yes/No
Logo PIN code lock
Logo PIN code
Off
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
Indicators
Projector Condition
LAMP
POWER WARNING
REPLACE
red
red/green
yellow
The projector is off. (The AC power cord is unplugged.)
✽
The projector is preparing for stand-by or the projection
lamp is being cooled down. The projector cannot be
turned on until cooling is completed.
✽
The projector is ready to be turned on with the POWER
ON-OFF button.
✽
The projector is operating normally.
✽
The projector is in the Power management mode.
✽
The temperature inside the projector is abnormally high.
The projector cannot be turned on. When the projector
is cooled down enough and the temperature returns
to normal, the POWER indicator lights red and the
projector can be turned on. (The WARNING indicator
keeps blinking.) Check and clean the air filters.
✽
The projector has been cooled down enough and the
temperature returns to normal. When turning on the
projector, the WARNING indicator stops blinking. Check
and clean the air filters.
✽
The projector detects an abnormal condition and cannot
be turned on. Unplug the AC power cord and plug it
again to turn on the projector. If the projector is turned
off again, disconnect the AC power cord and contact the
dealer or the service center for service and checkup.
Do not leave the projector on. It may cause an electric
shock or a fire hazard.
• • • green
• • • red
• • • blinks green
• • • blinks red
• • • off
✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow.
When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the
lamp replacement counter after replacing the lamp. See pages 54 and 55.
60
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V, H-Frequency below
mentioned and less than 140 MHz of Dot Clock.
When selecting these modes, PC adjustment can be limited.
ON-SCREEN
RESOLUTION
DISPLAY
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
––––––––
––––––––
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
V-Freq.
(Hz)
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
15.734
15.625
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
35.522
46.90
47.00
58.03
60.24
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
60.00
(Interlace)
50.00
(Interlace)
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.00
84.997
75.03
70.07
74.92
60.02
54.58
79.35
87.17
(Interlace)
77.07
75.70
86.96
(Interlace)
58.20
58.30
72.00
75.08
ON-SCREEN
RESOLUTION
DISPLAY
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 20
SXGA 21
SXGA 22
SXGA 23
MAC21
MAC
MAC
480p
575p
720p
1035i
1080i
1080i
WXGA 1
WXGA 2
WXGA 3
WXGA 4
UXGA 1
UXGA 2
UXGA 3
UXGA 4
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1400 x 1050
1400 x 1050
1400 x 1050
1152 x 870
1280 x 960
1280 x 1024
––––––––
––––––––
––––––––
––––––––
––––––––
––––––––
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1600 x 1200
1600 x 1200
1600 x 1200
1600 x 1200
H-Freq.
(kHz)
V-Freq.
(Hz)
64.20
62.50
63.90
63.34
63.74
71.69
81.13
63.98
79.976
60.00
61.20
71.40
50.00
50.00
63.37
76.97
61.85
46.43
63.79
91.146
63.979
65.346
65.121
68.68
75.00
80.00
31.47
31.25
45.00
33.75
33.75
28.125
48.36
47.70
48.36
56.16
75.00
81.25
87.5
93.75
70.40
58.60
60.00
59.98
60.01
67.19
76.107
60.02
75.025
60.00
65.20
75.60
86.00
(Interlace)
94.00
(Interlace)
60.01
72.00
66.00
86.70
(Interlace)
Appendix
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480i
575i
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
MAC 19
H-Freq.
(kHz)
60.18
85.024
60.190
60.116
59.902
75.06
75.08
75.08
59.88
50.00
60.00
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
60.00
60.00
60.00
72.00
60.00
65.00
70.00
75.00
61
Appendix
Technical Specifications
Mechanical Information
Projector Type
Dimensions (W x H x D)
Net Weight
Feet Adjustment
Multi-media Projector
9.66" x 2.3" x 6.82" (294.5 mm x 69.5 mm x 208 mm)(Not including adjustable feet)
5.3 lbs (2.4 kgs)
0˚ to 10.0˚
Panel Resolution
LCD Panel System
0.63" TFT Active Matrix type, 3 panels
Panel Resolution
1,024 x 768 dots
Number of Pixels2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color System
High Definition TV Signal
Scanning Frequency
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 ~ 100 kHz, V-sync. 50 ~ 100 Hz
Optical Information
Projection Image Size (Diagonal)
Adjustable from 40" to 300"
Projection Lens
F 1.65 ~ 1.81 lens with f 22.5 mm ~ 27 mm with manual zoom and focus
Throw Distance
4.6' ~ 41.3' (1.4 m ~ 12.6 m)
Projection Lamp200W
Interface
Video Input Jack
S-Video Input Jack
Audio Input Jacks
Computer Input 1/Component Input Terminal
Computer Input 2/Monitor Output Terminal
Computer/ Component Audio Input Jack
Service Port Connector
USB Connector
Audio Output Jack
RCA Type x 1
Mini DIN 4 pin x 1
RCA Type x 2
Analog RGB (Mini D-sub 15 pin) Terminal x 1
Analog RGB (Mini D-sub 15 pin) Terminal x 1 (In/Out switchable)
Mini Jack (stereo) x 1
Mini DIN 8 pin x 1
USB Series B receptacle x 1
Mini Jack (stereo) x 1 (Variable)
Audio
Internal Audio Amp
Built-in Speaker
1.0 W RMS
1 speaker, ø1.1" (28 mm)
Power
Voltage and Power Consumption
Operating Environment
Operating Temperature
Storage Temperature
AC 100 ~ 120 V (3.2A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200 ~ 240 V (1.6A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)
41˚F ~ 95˚F (5˚C ~ 35˚C)
14˚F ~ 140˚F (-10˚C ~ 60˚C)
Remote Control
62
Battery
Operating Range
Dimensions
Net Weight
AA or LR6 1.5 V ALKALINE TYPE x 2
16.4' (5 m)/±30˚
1.9" (W) x 0.87" (H) x 5.7" (D) (49 mm x 22 mm x 145.3 mm)
3.53 oz (100 g) (including batteries)
Appendix
Accessories
Owner's Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
Lens Cover with String
PIN Code Label
● The specifications are subject to change without notice.
●LCD panels are manufactured to the highest possible standards. Even though 99.99% of
the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the
characteristics of the LCD panels.
The parts listed below are optionally available. When ordering those parts, specify the item and
Model No. to the sales dealer.
Model No.
COMPONENT-VGA Cable
: POA-CA-COMPVGA
SCART-VGA Cable
: POA-CA-SCART
Ceiling Hanger
: POA-CHS-US02 (for low ceiling)
: POA-CHL-UL02 (for high ceiling)
: POA-CHB-XU70
Laser Pointer Remote Control
: POA-RCKIT03
Presentation Kit
: POA-RCKIT04
Soft Carrying Case
: POA-CAC-VCL2
63
Appendix
Optional Parts
Appendix
Configurations of Terminals
COMPUTER INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : Analog RGB (Mini D-sub 15 pin)
4
5
10
15
2
3
9
14
8
13
1
7
12
6
1
Red (R/Cr) Input/Output
9
2
Green (G/Y) Input/Output
10
Ground (Vert.sync.)
3
Blue (B/Cb) Input/Output
11
Ground/-----
11
4
Horiz. sync. Input/Output (Composite H/V sync.)
6
Ground (Red)
14
Vert. sync.
7
Ground (Green)
15
8
Ground (Blue)
1
RXD
2
-----
3
-----
4
GND
5
RTS/CTS
6
TXD
7
GND
8
GND
USB CONNECTOR (Series B)
64
2
1
3
4
-----
13
Serial
2 1
12
Ground (Horiz.sync.)
Terminal: Mini DIN 8-PIN
7 6
4 3
-----
5
SERVICE PORT CONNECTOR
8
5
-----
1
Vcc
2
- Data
3
+ Data
4
Ground
-----
Appendix
PIN Code Number Memo
Write down the PIN code number in the column below and keep it with this manual securely. If you
forgot or lost the number and unable to operate the projector, contact the service station.
PIN Code Lock No.
Factory default set No: 1 2 3 4*
Logo PIN Code Lock No.
Factory default set No: 4 3 2 1*
*Should the four-digit number be
changed, the factory set number
will be invalid.
Appendix
While the projector is locked with the PIN code....
Put the label below (supplied) on in a prominent place of
the projector's body while it is locked with a PIN code.
65
Part No. 1LG6P1P0156-- (KT6AC)
SANYO Electric Co., Ltd.