SWL780A
2 TO 1 VGA SWITCH
Status: Available
FUNCTIONAL NOTES:
THIS SWITCH USES A WIRING HARNESS AND THEREFORE USES A DIFFERENT
SWITCHING
MECHANISM (STACKPOLE) THAN THE OLD SW SWITCHES. IT HAS SOLDER
CONNECTIONS FROM
THE SWITCHING MECHANISM TO THE CONNECTORS.
This is a 2-to-1 Manual VGA Video Switch used to connect one monitor between two
systems or two monitors with one system or source>
This switch uses a Style "A" enclosure. Unless otherwise specified all the
connectors are female.
Use EVNPS05(15-Pin High Density Cable) with this switch.
NOTE: This switch has a resolution limitation of 800X600@60Hz.
PRODUCT SPECIFICATIONS:
Physical
Weight
Dimensions
Leads Supported
Connector Style
1.5 lb. (0.7 kg.)
2.5"H x 6"W x 6.3"D (6.4H x 15.2W x 16D cm.)
1 - 15
3 Female High Density 15-Pin Connectors
Marketing
MTBF
Special Product Cross
Reference
Special Product Cross
Reference
Literature
Manual Available?
Manual Name
Manual Date
Schematic Vendor Name
Schematic Available?
Schematic Non-Disclosure
Required?
Schematic Date
Additional Schematic
Requirements
Literature Comments
25,000 Cycles
EVNPS04 (15-Pin High Density Cable)
SWCX93455 2-1 VGA Switch, EMI/RFI case and
wired with coax for RGB leads
Environmental
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
32 - 114 Degrees Fairenheit (0 - 45 Degrees Celsius)
0 - 95% Relative Humidity (Non-Condensing)
-40 to 176 Fairenheit (-40 to 80 Degrees Celsius)
0 - 95% Relative Humidity (Non-Condensing)
SWL780A
2 TO 1 VGA SWITCH
Status: Available
Miscellaneous Notes
QTY OF 3
Cable Option 1
EVNPS05-0010-MX
Cable to connect VGA devices to switch. Most common length is 10 ft. Other
lengths available up to 100 ft. Specify genders. Switch requires male.
SWL780A
2 TO 1 VGA SWITCH
Status: Available
Precautions
MAX SIGNAL LEVELS
AC 125V 0.3A
DC 30V 0.5A