Specifications: Xerox Nuvera® 100/120/144/157 EA and MX

Xerox Nuvera® 100/120/144/157 EA
and MX Production Systems
•
Semi Conductive Magnetic Brush Technology
(SCMB) with Emulsion Aggregation (EA) Toner
•
Silicon/Teflon fusing for sharper halftones
•
Dual beam Raster Output Scanner (ROS)
•
Print path image-to-sheet and front-to-back
registration ± 0.65 mm
Toner
•
EA 210,000 prints/9 lb bottle
(1 bottle per system, second optional)
•
MICR 90,000 prints/11.1 lb bottle
(2 bottles per system)
Print Speed
O P T I O N A L I N T E G R AT E D
DOCUMENT SC ANNING*
STOR AGE
•
Memory: 8 GB (RAM)
Scan Rate
•
Hard Drive: 500 GB SATA
•
DVD+RW Drive (CD write only)
•
Second Hard Drive: 1 TB SATA Drive (optional)
•
Speed based on 8.5" x 11"/A4:
•
Simplex: 120 images per minute
•
Duplex: 120 images per minute
RESOLUTION
•
600 x 600 dpi
•
8-bit gray (256 shades)
•
•
•
Maximum scan from platen: 12" x 18"
(305 mm x 457 mm)
High resolution, high signal-to-noise
image sensor
Scan to file resolution: 300, 400, 600, 1200 dpi
A U T O M AT I C D O C U M E N T F E E D E R
SECURIT Y
•
Solaris 10 OS
•
Four administrator-selectable security modes
and levels
•
Fully customizable profiles for each level
•
Encrypted job-submission modes
•
Secure print mode (restricts page reprints)
•
IP address access filtering
•
Strong password support
•
Data overwrite option
•
Simplex 8.5" x 11"/A4 speeds of 100, 120, 144
or 157 impressions per minute
•
Simplex 11" x 17"/A3 speeds of 60, 72 or 78
impressions per minute
MEDIA FEEDING AND INSERT ION
OPTIONS
Sheet-feed and Insertion Modules**
•
4-tray
•
Total 5,800 sheets per module
•
Vacuum Air Shuttle feed system
•
Optional second module available
•
Tray 1: 1,600 sheets; 5.5" x 8.3" to 9" x 12.6"
(140 mm x 210 mm to 229 mm x 320 mm)
•
Tray 2: 3,100 sheets; 5.5" x 8.3" to 9" x 12.6"
(140 mm x 210 mm to 229 mm x 320 mm)
•
Tray 3 and 4: 550 sheets each; 7.2" x 8" to
12.6" x 18.5" (182 mm x 203 mm to
320 mm x 470 mm)
•
Capacity: 300 sheets (20 lb bond/75 gsm)
PRINT SUBMISSION DRIVERS
•
Sizes: 5.5" x 8.5" to 11" x 17" (A5 to A3)
•
Microsoft® Windows® 95 through Windows 7.0
•
Weights: 13 lb bond to 80 lb cover (49 –
220 gsm)
•
Apple® Macintosh® OS 8 through Macintosh OS X®
•
Sun Microsystems™ Solaris 2.6, 7.x, 8.x, 9.0, 10
•
Linux® 2.x
H IG H C A PA C I T Y S H E E T- F E E D A N D
INSERTION MODULES**
•
FreeFlow Print Manager for direct PDL submission
•
2-tray
•
Web User Interface
•
Total 3,200 sheets per module
•
Vacuum Air Shuttle feed system
•
Optional second sheet-feed module available
•
Tray 1: 1,600 sheets; 7.2" x 8" to 12.6" x 19.3"
(182 mm x 203 mm to 320 mm x 491 mm)
•
Tray 2: 1,600 sheets; 7.2" x 8" to 12.6" x 19.3"
(182 mm x 203 mm to 320 mm x 491 mm)
PRINT CONTROLLER
RIP
•
•
Xerox® FreeFlow® Print Server
Server Class Processors:
MANAGEMENT TOOL SUPPORT
––
AMD Opteron™ Technology
•
IBM® Tivoli®
––
Sun™ Solaris™ 10
•
CA Unicenter®
•
3.0 GHz Dual Core Processor with 8 GB memory
•
HP® OpenView®
•
19" color flat panel monitor (attached),
USB keyboard, USB mouse
•
SNMP V.1, IETF and MIBs, Trap Support
•
CentreWare® Web
•
Data Stream Options:
––
––
•
TIFF/PCL® 5e & PCL6/ASCII-standard
Adobe® PDF; Adobe PostScript® Level 3;
Multi-page TIFF; PPML; LCDS/Metacode;
IPDS™ – includes support for QR barcodes,
TrueType fonts (UTF-8)
S/370 or S/380 Bus and Tag (optional)
PRINTER MODULE
Image Quality
•
1200 x 1200 dpi RIP resolution
•
4800 x 600 dpi print resolution
•
Halftone screens: 125 lpi standard; optional
enhanced line screens: 85, 106, 134, 156 lpi
•
Operator adjustable settings: light/dark,
contrast sharpness, Toner Saver
Connectivity:
––
Ethernet interface (10/100BaseT; 1 GB)
*Not available on MX configuration
E A M E D I A L AT I T U D E
•
Uncoated: 52 – 300 gsm
•
Coated: 90 – 300 gsm
**Capacity based on 20 lb bond/75 gsm
Xerox Nuvera® 100/120/144/157 EA and MX Production Systems
M I C R M E D I A L AT I T U D E
•
•
Uncoated: 52 – 300 gsm
Coated: 90 – 140 gsm
Unload while run (with one/each unit) keeps
production moving.
•
Top Tray: 250 sheets (80 gsm)
•
Xerox® DS3500 Stacker: 3,500 single sheets
(80 gsm), 7,000 dual sheets (80 gsm) and 13.8 in.
(350.5 mm)
SHEET ENHANCEMENT MODULE
•
Post process module provides:
•
Media Sizes:
––
Outstanding stack quality
––
––
Sheet flatness for enhanced reliability of
finishing options (booklet makers, perfect
binders, stackers, etc.)
Top Tray: 5.5" x 8.3" to 12.6" x 19.3"
(139.7 mm x 210 mm to 320 mm x 491 mm)
––
Bypass with Rotation: 7" x 8" to 12.6" x 14.3"
(177.8 mm x 203.2 mm to 320 mm x 364 mm)
––
Bypass without Rotation: 5.5" x 8" to 12.6"
x 19.3" (139.7 mm x 203.2 mm to 320 mm x
491 mm)
––
Automatically adjusts per individual
media type
––
Standard with all Basic Finisher Modules and
Finishing Transport Module configurations
M U LT I F U N C T I O N F I N I S H E R
PROFESSIONAL AND
M U LT I F U N C T I O N F I N I S H E R
PRO PLUS
(Available on Xerox Nuvera® 100/120 EA)
––
•
Specialty Media: Carbonless, Tabs, NeverTear
and Pre-printed Offset
•
Compatibility: Xerox Nuvera® 100/120/144/
157 EA and MX
•
Maximum number of stackers per
configuration: 3
•
Optional Stack Cart
Multifunction Finisher Professional
•
Top tray: 250 sheet capacity (20 lb bond/
75 gsm)
•
Stacker: 2,000 sheet capacity (20 lb bond/
75 gsm)
•
Staple sets of 2 – 100 pages
––
Choice of 50 or 100 sheet staple cartridge
•
C-fold (single sheet) 8.5" x 11"/A4
•
Z-fold (single sheet) 8.5" x 11"/A4
•
Bi-fold (up to 5 sheets) 8.5" x 11"/A4, 8.5" x 13",
8.5" x 14", 11" x 17"/A3
•
Saddle-stitch booklet making up to 15 sheets/
60 imposed page images (20 lb bond/75 gsm)
•
Media Latitude: Uncoated 16 lb bond to 120 lb
index (56 – 220 gsm)
Multifunction Finisher Pro Plus also includes:
Insertion Tray
•
200 sheet capacity (20 lb bond/75 gsm)
•
Minimum paper size: 7" x 10"/B5
•
Maximum paper size: Ledger/A3
X E R O X ® I N T E G R AT E D P L U S
FINISHING SOLUTION FOR
BOOKLETS
•
Eliminates the need for skilled prepress
operators to prepare files according to
finisher specifications.
•
Eliminates manual programming at the
finishing device and reduces the risk of error
because the necessary parameters (e.g., page
imposition, page ordering and trimming) are set
automatically when a job enters your workflow.
•
Extends the convenience and cost effectiveness
of automated finishing to multiple printers
(Xerox® and non-Xerox®) without the need for
multiple, dedicated in-line finishing devices.
•
Maximizes productivity by enabling prints to be
output to stack carts at full rated print speed,
while available finishing device binds other jobs
at its full rated speed.
•
Easy to manage a mix of jobs that includes
diverse finishing requirements and short
print runs.
Hole Punch
•
2/3 (standard) or 2/4 (optional)
Customer Replacement Unit for North America
•
2/4 (standard) Hole Punch Customer
Replacement Unit for Europe
•
Minimum paper size: 7" x 10"/B5
•
Maximum paper size: 12" x 18"/SRA3
•
Media Latitude: Uncoated 16 lb bond to 110 lb
index (56 – 200 gsm)
ELEC TRIC AL REQUIREMENTS
•
•
Maximum stack capacity
Stack-nesting design enables the delivery of up
to 2,850 sheets at a time—without interruption.
187 – 240 VAC (Nominal), 50 Amp, 50/60 Hz
line service for North America
––
X E R O X ® P R O D U C T I O N S TA C K E R *
(2,850/2,600 with Stack Cart Kit)
Stacker: 7" x 8" to 12.6" x 19.3"
(177.8 mm x 203.2 mm to 320 mm x 491 mm)
•
DS3500 and DFA Finishers require additional
line service and power
187 – 240 VAC (Nominal) 30 Amp + 20 Amp,
50/60 Hz line service for Europe
––
Feeders and Finisher modules (BFMs) will
require additional power
––
DS3500 and DFA Finishers require additional
line service and power
E N V I R O N M E N TA L R E Q U I R E M E N T S
•
Temperature: 50° to 87° F (10° to 31° C)
•
Relative humidity: 15% to 85%; wet bulb
limitation 77° F
•
Run mode heat emissions: configuration
dependent; consult Installation Planning Guide
C E R T I F I C AT I O N S
•
Section 508 of the Rehabilitation Act
•
Corporate Environmental Leadership
Team policy of maintaining a waste-free
customer office
•
UL 60950-1, C-UL Approved for Canada CAN/
CSAC222.2 No. 60950-1-3 and IEC 60950-1
•
As an ENERGY STAR® partner, Xerox
Corporation has determined that Xerox
Nuvera® EA meets the ENERGY STAR
guidelines for energy efficiency.
PHYSIC AL CHAR AC TERISTICS**
Sheet Feed and Insertion Module
Width
Depth
Height
Weight
31.7"
28"
44.6"
423 lb
805 mm
711.2 mm 1,133 mm
192 kg
Feeder Module with Integrated Scanner
Width
Depth
Height
Weight
31.7"
28"
49.5"
505 lb
805 mm
711.2 mm 1,257.3 mm 229 kg
Print Engine
Width
Depth
Height
Weight
43"
29"
61.6"
793 lb*
1,092.2 mm 737 mm
1,565 mm 359.23
kg*
Sheet Enhancement Module
Width
Depth
Height
Weight
15"
28"
41.5"
168 lb
381 mm
711.2 mm 1,054 mm 76.2 kg
Xerox® Production Stacker
Width
Depth
Height
Weight
35"
30.25"
44.6"
532 lb
889 mm
768.4 mm 1,133 mm
237kg
Multifunction Finisher Professional
Width
Depth
Height
Weight
56.4"
28"
41.5"
445 lb
1,433 mm 711.2 mm 1,054 mm 202 kg
Multifunction Finisher Pro Plus
Width
Depth
Height
Weight
56.4"
28"
46.3"
485 lb
1,433 mm 711.2 mm 1,176 mm
220 kg
**With consumables loaded.
Please reference the specification sheets for Xerox®
FreeFlow Makeready®, FreeFlow Process Manager®
and FreeFlow® Web Services for complete details.
Consult the Installation Planning Guide for
detailed power requirements
*Capacity based on 20 lb bond/75 gsm
©2017 Xerox Corporation. All rights reserved. Xerox®, Xerox and Design®, CentreWare®, FreeFlow®, FreeFlow Makeready®, FreeFlow
Process Manager® and Xerox Nuvera® are trademarks of Xerox Corporation in the United States and/or other countries. BR22172
For more information visit xerox.com
Download PDF