QuickSpecs
HP 3PAR StoreServ 7000 Storage
Overview
HP 3PAR StoreServ 7000 Storage
HP 3PAR StoreServ 7000 Storage offers enterprise Tier 1 storage at a midrange price. Spend less time managing storage, get more
features for less money, and do it all without sacrificing performance or future scalability. HP 3PAR StoreServ 7000 Storage provides
high performance and guarantees to double your virtual machine density. With hardware assisted thin storage it is the only platform
that guarantees a 50% reduction in capacity requirements. HP 3PAR StoreServ is also the first product family with a common
architecture capable of six nines availability that meets SMB needs and spans to the largest global enterprise giving you access to the
same features as the world's largest service providers. You can start small and grow without painful upgrades down the road.
HP 3PAR StoreServ 7000 is storage made effortless.
HP 3PAR StoreServ 7200c
HP 3PAR StoreServ 7400c Storage
HP 3PAR StoreServ 7440c Storage
What's New



New lower cost 3.84TB cMLC SSDs available
New 1.92TB FIPS Encrypted cMLC SSD available
HP 3PAR File Persona Software Suite for HP 3PAR StoreServ 7200c/7400c/7440c
NOTE: The term “HP 3PAR StoreServ 7000 Storage” refers to the whole 7000 family, including both the new HP 3PAR StoreServ 7000
Storage Converged Controller models (7200c, 7400c, 7440c) as well as the legacy HP 3PAR StoreServ 7000 Storage models (7200 and
7400).
Summary
Number of Controller Nodes
3PAR StoreServ
7200c
3PAR StoreServ
7400c
3PAR StoreServ
7440c
3PAR StoreServ File
Controller v2
2
2 or 4
2 or 4
Up to 8
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 1
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Overview
HP 3PAR Gen4 ASICs
2
2 or 4
2 or 4
Not Applicable
2 six-core 1.8 GHz
2-4 six-core 1.8 GHz
2-4 eight-core 2.3 GHz
1-16 four-core 2.4
GHz
808 GiB
1596 GiB
3192 GiB
Not Applicable
Flash Cache (optional)
768 GiB
1500 GiB
3000 GiB
Not Applicable
On-Node Cache
40 GiB
96 GiB
192 GiB
None
808 GiB
816 GiB
1596 GiB
Not Applicable
Flash Cache per node pair
768 GiB
768 GiB
1500 GiB
Not Applicable
On-Node Cache per node pair
40 GiB
48 GiB
96 GiB
None
12 ports
24 ports
24 ports
4 – 128
8Gb/s Fibre Channel Host Ports
4 - 12 ports
4 - 24 ports
4 - 24 ports
Not Applicable
16Gb/s Fibre Channel Host Ports
0 - 4 ports
0 - 8 ports
0 - 8 ports
Not Applicable
10Gb/s iSCSI Host Ports
0 - 4 ports
0 - 8 ports
0 - 8 ports
Not Applicable
10Gb/s Ethernet Adapter
0 - 4 ports
0 - 8 ports
0 - 8 ports
Not Applicable
1Gb/s Ethernet Adapter
0 - 8 ports
0 - 16 ports
0 - 16 ports
Not Applicable
1GbE/10GbE Network Ports
Not Applicable
Not Applicable
Not Applicable
4 – 128
Maximum Initiators Supported
1024
1024 or 2048
1024 or 2048
Not Applicable
2
2-4
2-4
2-4
24
24
24
Not Applicable
6 – 240
6 – 576
6 – 960
2 (per node)
Number of Solid State Drives
6 – 120
6 – 240
6 – 240
None
Max Raw Capacity (approx.)
500 TiB
1600 TiB
2000 TiB
Not Applicable
2 - 128TiB6
2 - 256TiB6
2-256TiB6
Depends on the
usable capacity
from the 3PAR array
3PAR StoreServ
7200c
3PAR StoreServ
7400c
3PAR StoreServ
7440c
3PAR StoreServ File
Controller v2
Processors
Total Cache
Total Cache per controller node pair
Maximum Host Ports
Built-in 1GbE Ports
7
2U Controller Enclosure SAS Drive
Capacity
Number of Disk Drives8
1
Usable File Capacity
Capacity Details
RAID Levels
RAID 0, 1, 5, 6
RAID 0, 1, 5, 65
RAID 5 Data to Parity Ratios
2:1 - 8:1
2:1 - 8:15
RAID 6 Data to Parity Ratios
4:2, 6:2, 8:2, 10:2, 14:2
4:2, 6:2, 8:2, 10:2,
14:25
Drive Capacities (approximate GB2) 480 SSD3, 920 SSD3, 480GB cMLC SSD, 1.92TB cMLC SSD, 3.84TB cMLC
(RAID levels, parity ratios, and drive SSD, 300 15K SAS, 450 10K SAS, 600 10K SAS, 600 15K SAS, 900 10K
capacities all mixable within the
SAS, 1200 10K SAS, 1000 7.2K NL, 1800 10K SAS, 2000 7.2K NL4, 3000
same Storage System)
7.2K NL4, 4000 7.2K NL4, 6000 7.2K NL4
Not Applicable
Number of Add-on Drive Enclosures
(Each Drive Enclosure holds up to
24 drives in 2U for small form factor
drives and 4U for large form factor
drives)
Not Applicable
0 - 9 enclosures
0 - 22 enclosures
0 - 38 enclosures
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 2
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Overview
Maximum raw capacity currently supported with any and all drive types. The minimum supported raw capacity is equal to 6 * Min
drive size available.
2
For storage capacity, 1 GiB = 10243 bytes and 1 TiB = 1024 GiB.
3
SSDs are Solid State Drives.
4
NL drives are 7200 RPM Enterprise SAS drives.
5
Applies to the array storage assigned to 3PAR StoreServ File Controller for file services
6
Usable file capacity supported for HP 3PAR File Persona Software Suite.
7
Two built-in 1GbE ports per node pair can be used either for Remote Copy (RCIP) (or for File Persona only on 7000c models).
8
Not applicable to HP 3PAR StoreServ 7200c All-Flash Starter Kit
1
NOTE: Specifications are subject to change without notice.
Host OS Support
Citrix® XenServer® | HP-UX® | IBM® AIX®
Microsoft® Windows® Server, including Microsoft® Hyper-V™
Open VMS | Oracle® Linux® (UEK and RHEL compatible kernels) | Oracle® Solaris
Red Hat® Enterprise Linux® | Red Hat® Enterprise Virtualization
SUSE® Linux Enterprise | Ubuntu | VMware vSphere™
For the latest information on supported operating systems refer to Single Point of Connectivity Knowledge for HP Storage
Products (SPOCK): http://www.hp.com/storage/spock
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 3
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Standard Features
Efficient
Get thin and stay thin - Thin technologies unique to the HP 3PAR StoreServ family can reduce capacity
requirements by 50%. Purchase only what you need, as you need it so you can focus resources on
growing your business, not maintaining your storage. Additionally, the HP 3PAR ASIC with Thin Built In
features an efficient, silicon-based zero-detection mechanism. This unique hardware capability gives
HP 3PAR StoreServ Storage the power to remove allocated but unused space without impacting
performance.
Data center virtualization - Increase virtualization return on investment. Double virtual machine
density on your physical servers, spend up to 90 percent less time managing your storage, and
support your virtualization deployment with 50 percent less storage capacity. HP 3PAR StoreServ is
built from the ground up to deliver performance that exceeds the demands of virtualized data centers
along with transformative levels of simplicity, agility, and efficiency.
Service levels - With policy-based autonomic sub-LUN tiering, you can balance the cost of capacity and
the cost of performance and put the right data on the right storage tier at the right time.
Do more with less - With HP 3PAR StoreServ Storage you can purchase up to 75 percent less capacitymeaning less equipment to house, fewer disks to power and cool, less hardware to retire after it has
reached its end of life, and a reduced carbon footprint.
HP 3PAR Express Writes - HP 3PAR Express Writes is a write acceleration feature built in to HP 3PAR OS
version 3.2.1 and later to optimize CPU utilization and, depending on workload, deliver greater
throughput, up to 30 percent more IOPS, and 20 percent reduced latency 1. All currently supported HP
3PAR StoreServ Storage HBAs and hosts also support the HP 3PAR Express Writes feature, and its
benefits extend to both spinning drives and flash-based media.
1
Based on a random, 100 percent write workload with an 8K block size.
The HP 3PAR StoreServ 7200 and StoreServ 7400 (2-node and 4-node) storage systems are US
Environmental Protection Agency (EPA) ENERGY STAR certified. Details about the specific
configurations that are certified are available at the US EPA web site at:
https://data.energystar.gov/Active-Specifications/ENERGY-STAR-Certified-Data-CenterStorage/gqtf-hp7x?
Autonomic
It's like breathing-you don't even have to think about it. Simplify, automate, and expedite storage
management by handling storage provisioning, tiering, and change management autonomicallyintelligently, at a sub-system level, and without administrator intervention.
SmartStart Software - software designed to get you off to a quick start with your new HP 3PAR
StoreServ 7000 system.
Common architecture - Access the same features as the world's largest service providers with a
common architecture that meets SMB needs and spans to the largest global enterprise.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 4
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Standard Features
Resilient
Secure multi-tenancy - Consolidate with confidence. Achieve higher service levels for more users and
applications with less infrastructure. HP 3PAR StoreServ Storage is designed to support massive
consolidation by supporting mixed workloads and secure administrative segregation of users, hosts,
and application data. Deliver higher performance levels, six-nine availability, and next-generation
functionality to multiple user groups and applications from a single storage system.
Scalable - HP 3PAR StoreServ 7000 provides affordable entry pricing and unique, non-disruptive
scalability to four nodes.
High Availability - With the Get 6-Nines Guarantee, HP ensures 99.9999% data availability with all HP
3PAR StoreServ 7400 systems with four nodes giving you the peace of mind to expand deployment of
mission critical applications to midrange storage. Intelligent data striping across all available
enclosures provides HA Cage, the ability to maintain availability even when a whole drive enclosure
fails. HP 3PAR Persistent Cache in four node configurations eliminates performance impacts that
result from unplanned component failures, making it a must-have for maintaining service levels in the
virtual data center-a feature that you can't get from any other midrange storage platform.
Storage federation - Meet the needs of today's data center with the ability to move data and
workloads between arrays without impact to applications, users, or services. Simply and nondisruptively shift data between any model HP 3PAR StoreServ system without additional management
layers or appliances. Storage federation on HP 3PAR StoreServ Storage can also help you improve
availability in clustered VMware environments.
Mixed workload - Mixed workload support serves transactional and throughput-intensive workloads
from a single device. The purpose-built HP 3PAR ASIC delivers mixed workload support to alleviate
performance concerns and cut traditional array costs. Transaction- and throughput-intensive
workloads run on the same storage resources without contention, thereby cutting array purchases in
half.
Data at Rest Encryption - enables the encryption for all the data that is stored on the internal drives of
the 3PAR StoreServ Storage. The 3PAR StoreServ Data Encryption solution encrypts and decrypts all
data written to and read from the media automatically. The 3PAR StoreServ Data Encryption solution
encrypts the data so that data cannot be read off a drive that is removed from the 3PAR Storage. In the
event of a failure of the drive or the theft of a drive, the proper authentication key is required to be
entered to gain access to the data stored within the drive. This method of encryption allows the user
the comfort knowing all data contained on the drive is protected against internal and external risks.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 5
QuickSpecs
HP 3PAR StoreServ 7000 Storage
HP 3PAR StoreServ 7200 All-Flash Starter Kit
HP 3PAR StoreServ 7200c All-Flash Starter Kit
HP 3PAR StoreServ 7200c All-Flash Starter Kit is an all-flash version of the HP 3PAR StoreServ 7200c that provides all-flash
acceleration at entry-level price. The kit includes the HP 3PAR StoreServ 7200c Storage System Base equipped with 8 x 480GB SFF
cMLC SSD drives and also includes the Reporting Suite and Virtual Copy software.
What's New

HP 3PAR StoreServ 7200c All-Flash Starter Kit
HP 3PAR StoreServ 7200c All-Flash Starter Kit
The HP 3PAR StoreServ 7200c All-Flash Starter Kit is the solution for mid-range customers that need all-flash acceleration at an
affordable price. The kit is an orderable part number that includes, in addition to the HP 3PAR StoreServ 7200c Storage System
Base, cMLC SSD drives and Reporting Suite and Virtual Copy software.
The HP 3PAR StoreServ 7200c All-Flash Starter Kit has the same Drive LTUs cap and maximum number of SSDs as the HP 3PAR
StoreServ 7200c. The Drive LTUs cap for HP 3PAR StoreServ 7200c All-Flash Starter Kit is 48. After reaching the cap, you do not
need to purchase any more Drive LTUs for that title. The maximum number of SSDs is 120.
Model
HP 3PAR StoreServ 7200c All-Flash Starter Kit
K7W06A
The HP 3PAR StoreServ 7200c All-Flash Starter Kit is an orderable part number that includes the following individual parts.
Quantity
Component
1
HP 3PAR StoreServ 7200c 2-node Field Integrated Storage Base
E7X67A
8
HP M6710 480GB 6G SAS 2.5in cMLC SSD
E7Y55A
1
HP 3PAR 7200 Operating System Software Suite Base LTU
BC745B
8
HP 3PAR 7200 Operating System Software Suite Drive LTU
BC746A
1
HP 3PAR 7200 Reporting Suite Base LTU
BC767B
1
HP 3PAR 7200 Virtual Copy Base LTU
BC753A
8
HP 3PAR 7200 Virtual Copy Drive LTU
BC754A
NOTE: Users can add more SSDs, drive enclosures (and any other 7000 accessory), and software to the HP 3PAR StoreServ 7200
All-Flash Starter Kit quote. Each of the nested components will appear as separate parts on the quote and will be priced
accordingly
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 6
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Service and Support, HP Care Pack, and Warranty Information
Warranty
3 Year, On-site Warranty Service for hardware components. 7x24 4-hour remote response with
next business day on-site response
The warranty on the following HP 3PAR StoreServ 7000 SSD product numbers is 5 years, parts
only:
HP 3PAR StoreServ M6710 480GB 6G SAS SFF(2.5in) MLC 5yr Wty Solid State Drive
E7W54B
HP 3PAR StoreServ M6720 480GB 6G SAS LFF(3.5in) MLC 5yr Wty Solid State Drive
E7W55B
HP 3PAR StoreServ M6710 920GB 6G SAS SFF(2.5in) MLC 5yr Wty Solid State Drive
E7W24B
HP 3PAR StoreServ M6720 920GB 6G SAS LFF(3.5in) MLC 5yr Wty Solid State Drive
E7W25B
HP 3PAR StoreServ M6710 920GB 6G SAS SFF(2.5in) FIPS Encrypted MLC Solid State Drive
E7Y52A
HP 3PAR StoreServ M6710 480GB 6G SAS SFF(2.5in) cMLC Solid State Drive
E7Y55A
HP 3PAR StoreServ M6720 480GB 6G SAS LFF(3.5in) cMLC Solid State Drive
E7Y56A
HP 3PAR StoreServ M6710 1.92TB 6G SAS SFF(2.5in) cMLC Solid State Drive
E7Y57A
HP 3PAR StoreServ M6720 1.92TB 6G SAS LFF(3.5in) cMLC Solid State Drive
E7Y58A
HP 3PAR StoreServ M6710 1.92TB 6G SAS SFF(2.5in) FIPS Encrypted cMLC Solid State Drive
K0F27A
HP 3PAR StoreServ M6710 3.84TB 6G SAS SFF(2.5in) cMLC Solid State Drive
K2Q91A
HP 3PAR StoreServ 7000 drive ( SAS performance and Nearline and SSDs excluding the ones listed
above) warranty is 3 years, parts only.HP warrants only that the Software media will be free of
physical defects for a period of ninety (90) days from delivery
For more information about HP's Global Limited Warranty and Technical Support, visit this link.
NOTE: SSDs have a limited number of writes that can occur before reaching the SSD's write
endurance limit. This limit is generally high enough so wear out will not occur during the expected
service life of an HP 3PAR StoreServ under the great majority of configurations, IO patterns, and
workloads. HP 3PAR StoreServ tracks all writes to SSDs and can report the percent of the total
write endurance limit that has been used. This allows any SSD approaching the write endurance
limit to be proactively replaced before they are automatically spared out. An SSD has reached the
maximum usage limit once it exceeds its write endurance limit. Following the product warranty
period, SSDs that have exceeded the maximum usage limit will not be repaired or replaced under
HP support contracts.
Service and Support
Technology Services for increased uptime, productivity and ROI
Trust HP storage technology experts for every level of service and support. Our integrated portfolio of
services for storage help customers reduce costs, optimize data, streamline storage management,
and improve backup and recovery. Capitalizing on HP Storage Systems' capabilities requires a service
partner who understands your increasingly complex environment. Team with the people who know HP
infrastructure hardware and software best-the experienced professionals at HP Services.
Protect your business beyond warranty
Warranty protects against manufacturer defects, however warranty uplifts, such as HP Care Pack
Services protect the business-by reducing downtime risks and providing operational consistency for
mission-critical and standard business computing.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 7
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Service and Support, HP Care Pack, and Warranty Information
What HP Storage Technology Services can do for you
HP Storage Technology Services can help you design, deploy, test, integrate, support, and manage IT
and infrastructure solutions. HP storage lifecycle support services offers a full spectrum of customer
care-from technology support to complex migrations to complete managed services.
Choose the right level of support, deployment and integration services
HP support recommendations are designed to help you enhance technology operations and lower riskand make it easier for you to seek the right balance between affordability and service-level
commitments. Depending on your individual support needs, choose from three levels of care that
cover the entire lifecycle to better address your needs-Optimized Care, Standard Care, and Basic Care.
If none of our support recommendations meet your needs, we can tailor a service solution for your
unique support requirements. Only HP brings together deep expertise, proactive and business critical
support and a strong partner network-together with a full set of infrastructure services designed to
power a Converged Infrastructure
Optimized Care - delivers
best performance and
stability through
deployment and proactive
management practices
HP Proactive Care Advanced - This service builds and incorporates on Proactive Care Service and also
gives customers personalized technical and operational advice from an assigned, local Account
Support Manager for personalized technical collaboration, flexible access to specialist skills to help
optimize business critical IT, and enhanced Critical Incident Management to help so the business is not
affected if there is a system or device outage.
Additional Option:
3 Year (or) 1 Year HP Proactive Select Credits, HP Data Sanitization Tier 1 Service
Standard Care - maintains
high level of uptime, along
with expert help to cut the
cost and complexity of
implementation and
support
HP Proactive Care 24x7 - for a higher return on your storage investment, Proactive Care delivers
hardware and software support services designed specifically for your technology; rapid access to
Advanced Solution Center Specialists plus, Firmware/Software management and best practice advice.
Customers can optimize the return on their IT investment and realize the advantage of running their
business critical applications on virtualized infrastructure. Plus, HP Proactive Select 20 credits per
year, select from an extensive menu of consultancy and technical services, such as onsite firmware
upgrades, health checks, assessments, and education.
Additional Option:
3 Year (or) 1 Year HP Proactive Select Credits, HP Data Sanitization Tier 1 Service
Basic Care - Minimum
recommended support
HP Proactive Care 24x7 - for a higher return on your storage investment, Proactive Care delivers
hardware and software support services designed specifically for your technology; rapid access to
Advanced Solution Center Specialists plus, Firmware/Software management and best practice advice.
Customers can optimize the return on their IT investment and realize the advantage of running their
business critical applications on virtualized infrastructure. Plus, 10 credits per year, select from an
extensive menu of consultancy and technical services, such as onsite firmware upgrades, health
checks, assessments, and education.
Additional Option:
3 Year (or) 1 Year HP Proactive Select Credits, HP Data Sanitization Tier 1 Service
HP Proactive Select is a flexible way to purchase services to fit your particular environment or
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 8
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Service and Support, HP Care Pack, and Warranty Information
situation. Working with an HP Account Support Manager, you select a package of services in the form
of services credits that include proactive services spanning many technologies and processes, such as
on-site firmware upgrades, health checks, assessments, and education. You tailor the service delivery
to improve time to production, optimize performance, or build in continuous improvements.
Implementation
Installation:
Whichever level of care you select, consider our Installation and Startup Services for a smooth
implementation.
HP 3PAR StoreServ 7000 Storage Installation and Startup Service - For smooth startup, this service
provides you with deployment of your HP 3PAR StoreServ 7000 Storage, ensuring proper installation
into your storage environment and helping you realize the maximum benefit from your storage
investment.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-2568ENW.pdf
Related Services
HP Storage Transformation Workshop - Explore data management transformation journey to
business-aligned visions, aligning your specific situation and HP’s experiences.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-9541ENW.pdf
HP 3PAR StoreServ Data Migration - Proven expertise and tools help you migrate data across your
data center or around the globe.
HP 3PAR StoreServ Data Migration Service data sheet - US English (A4)
HP Storage Modernization Service - Modernize your storage to take better advantage of physical or
virtualized server environments.. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-4620ENW.pdf
HP StoreServ Integration Service - Integrate your new HP 3PAR StoreServ system so that it is agile, performs
effectively, and scales to rapid growth.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-9254ENW.pdf
HP EVA to 3PAR Acceleration Service - The HP EVA to 3PAR Acceleration Service can help guide you or
even execute data migration activities on your behalf that can not only optimize, but provide OPEX and
CAPEX savings as a result of your journey from EVA to 3PAR. This service provides customers with an
alternative DIY ("do-it-yourself") data migration option with guidance from TS Storage migration
specialists. With the help of migration experts, this service allows customers to execute an EVA to
3PAR data migration at their own pace and lowered cost.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-4234ENW.pdf
HP SAN Deployment Service - HP delivers complete design and implementation services for Fibre
Channel, FCoE, FCIP, SAS, and iSCSI storage area network (SAN) connectivity components. This service
includes three levels of support based on the type of environment, ranging from simple to more
complex. A trained service specialist guides the implementation of the storage switches in the SAN
environment according to HP quality standards.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-8527EN.pdf
HP Data Replication Solution Service for 3PAR Virtual Copy - HP Data Replication Solution Service for
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 9
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Service and Support, HP Care Pack, and Warranty Information
HP 3PAR Virtual Copy Software helps create, manage and configure local replication data mirroring
and snapshot capabilities of 3PAR storage systems. This service enables snapshots and mirroring to
facilitate data restores, minimize downtime for backups, perform application testing, support data
mining use with decision-support tools.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-0217ENW.pdf
HP Data Replication Solution Service for 3PAR Remote Copy - HP Data Replication Solution Service
for 3PAR Remote Copy Software configures real-time data mirroring between local and remote 3PAR
storage systems to safeguard critical business information. Provides scalable deployment of HP
Remote Copy Software real-time data mirroring between a local and a remote 3PAR storage system.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-8627ENW.pdf
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-9431ENW.pdf
HP 3PAR 7000 Replication Software Suite Installation and Startup Service - Provides
implementation of the HP 3PAR 7000 Replication Software Suite product. Replication Suite includes
3PAR Remote Copy, 3PAR Virtual Copy, and 3PAR Peer Persistence. The service is designed to help get
HP 3PAR 7000 Replication Software Suite up and running quickly and to provide a demonstration of
the product's key features using sample or test data only.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-2570ENW.pdf
HP 3PAR Peer Persistence Software Installation and Startup Service - Provides implementation of
the HP 3PAR Peer Persistence Software product. The service is designed to help get HP 3PAR Peer
Persistence up and running quickly and to provide a demonstration of the product's key features using
sample or test data only.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-2772ENW.pdf
HP 3PAR Adaptive Optimization Policy Implementation Service - HP 3PAR Adaptive Optimization
Policy Implementation Service provides analysis, recommendations, and implementation of HP 3PAR
Adaptive Optimization policies to enable storage tiering using data collected from the HP 3PAR
Storage system over time. With the assistance of a designated IT storage administrator, a service
specialist works with the customer to implement Adaptive Optimization policies on the HP 3PAR
Storage system to help deliver service level optimization for virtual and cloud data centers while
reducing cost, increasing agility and minimizing risk.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf
HP Storage Virtual Volume Design and Implementation Service - When redeploying an HP
StorageWorks Disk Array, the HP Virtual Volume Design and Implementation Service provides the
necessary activities required to design and implement a new virtual volume configuration.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3764ENN.pdf
HP Thin Volume Conversion Service - Provides evaluation and execution of conversion from standard
to thin provisioned virtual volumes for HP 3PAR Storage. A service specialist advises the customer on
HP thin provisioning best practices, provides evaluation of potential disk capacity savings if target
virtual volumes are converted, and plans and implements thin conversion processing. The service
leverages 3PAR thin provisioning capabilities to help optimize storage capacity, reduce cost, increase
agility and maintain performance.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf
HP Performance Analysis Service for HP Disk Arrays - The service provides data collection, detailed
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 10
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Service and Support, HP Care Pack, and Warranty Information
I/O analysis and enhancement recommendations for HP 3PAR StoreServ Storage disk arrays, HP EVA
P6000 Storage disk arrays and HP XP P9000 Storage disk arrays. HP Performance Analysis Service for
HP Storage Disk Arrays provides a single engagement concerning the performance of a single HP 3PAR
StoreServ Storage disk array, HP EVA P6000 Storage disk array and HP XP P9000 Storage disk array
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6668EN.pdf
HP 3PAR Health Check Service - The HP 3PAR Health Check service is delivered as a single
engagement, providing data collection, analysis, report creation, and a briefing session concerning the
performance of a single HP 3PAR StoreServ Storage System. This health check service is best for HP
3PAR StoreServ Storage Systems that have been installed and are in normal production mode. It can
also be used to establish a baseline for future reference to improve the effective use of your storage
system.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-3225ENW.pdf
HP 3PAR Storage Rebalance Service - The HP 3PAR Rebalance Service helps balance data across your
HP 3PAR StoreServ Storage to take advantage of the capabilities of the array architecture. The service
provides analysis, planning, and implementation of data movement and/or physical movement of
drive magazines within the array.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-0280ENW.pdf
HP 3PAR Adaptive Optimization I&S - For Adaptive Optimization, design, creation, and
implementation of Adaptive Optimization policies; policy design, creation, and implementation can be
accommodated using the HP 3PAR Adaptive Optimization Policy Implementation Service, which is
available via HP Proactive Select.
The Service has further been described in the HP 3PAR 7000 Software Installation and Startup Service
Datasheet: http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-2569ENW.pdf
HP 3PAR Dynamic Optimization I&S - For Dynamic Optimization, implementation by HP of tasks
required to balance the HP 3PAR storage system; the service provides the Customer with a product
overview, advice, and suggested strategies for use of Dynamic Optimization, and extended/ongoing
analysis and/or implementation of Dynamic Optimization strategies can be accommodated at
additional cost
The Service has further been described in the HP 3PAR 7000 Software Installation and Startup Service
Datasheet: http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA4-2569ENW.pdf
Get connected and get back to business
HP Storage Technology Services provide the path to get your HP Storage solutions and your business
connected to HP. Once connected, our experts are able to scan your system and run health checks,
then use that data to create personalized reports and recommendations for actions to take to prevent
problems and downtime.
For more information
http://www.hp.com/services/storage
To learn more on HP Storage Services, please contact your HP sales representative or HP Authorized
Channel Partner
HP Care Pack Services are sold by HP and HP Authorized Service Partners:

Services for customers purchasing from HP or an enterprise reseller are quoted using HP
order configuration tools.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 11
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Service and Support, HP Care Pack, and Warranty Information

Customers purchasing from a commercial reseller can find HP Care Pack Services at:
http://www.hp.com/go/lookuptool
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 12
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
Step 1 - Choose a Base configuration
HP 3PAR StoreServ 7000 configurations start with the selection of the Base. The Base includes controller nodes, bays for small
form factor drives, and PCIe slots for host adapter cards. SAN Kits are also considered base configurations. The SAN Kits simplify
ordering for SAN configurations with the array and extend the switch warranty to 3-years by including switches with an HP 3PAR
StoreServ 7000 Storage Base.
HP 3PAR StoreServ 7000 Base Configurations
Factory Integrated
in HP rack
Factory Integrated
in HP rack in a Storage
Centric Configuration
Field Integrated
HP 3PAR StoreServ 7200c 2-node Storage Base
QR511A
HP 3PAR StoreServ 7400c 2-node Storage Base
QR512A
HP 3PAR StoreServ 7400c 4-node Storage Base
QR513A
HP 3PAR StoreServ 7440c 2-node Storage Base
E7X76A
HP 3PAR StoreServ 7440c 4-node Storage Base
E7X81A
HP 3PAR StoreServ 7200 2-node Storage Base
QR482A
HP 3PAR StoreServ 7400 2-node Storage Base
QR483A
HP 3PAR StoreServ 7400 4-node Storage Base
QR485A
HP 3PAR StoreServ 7200c 2-node Storage Base for Storage Centric Rack
E7X65A
HP 3PAR StoreServ 7400c 2-node Storage Base for Storage Centric Rack
E7X69A
HP 3PAR StoreServ 7400c 4-node Storage Base for Storage Centric Rack
E7X73A
HP 3PAR StoreServ 7440c 2-node Storage Base for Storage Centric Rack
E7X78A
HP 3PAR StoreServ 7440c 4-node Storage Base for Storage Centric Rack
E7X84A
HP 3PAR StoreServ 7200 2-node Storage Base for Storage Centric Rack
E7W49A
HP 3PAR StoreServ 7400 2-node Storage Base for Storage Centric Rack
E7W50A
HP 3PAR StoreServ 7400 4-node Storage Base for Storage Centric Rack
E7W51A
HP 3PAR StoreServ 7200c 2-node Field Integrated Storage Base
E7X67A
HP 3PAR StoreServ 7400c 2-node Field Integrated Storage Base
E7X71A
HP 3PAR StoreServ 7400c 4-node Field Integrated Storage Base
E7X75A
HP 3PAR StoreServ 7440c 2-node Field Integrated Storage Base
E7X80A
HP 3PAR StoreServ 7440c 4-node Field Integrated Storage Base
E7X86A
HP 3PAR StoreServ 7200 2-node Storage Base
QR482A
HP 3PAR StoreServ 7400 2-node Storage Base
QR483A
HP 3PAR StoreServ 7400 4-node Storage Base
QR485A
HP 3PAR StoreServ 7200 Storage System Flash Starter Kit
K2Q09A
HP 3PAR StoreServ 7200 8Gb H-series Base System SAN Kit
QR488A
HP 3PAR StoreServ 7200 16Gb Virtualization Base System SAN Kit
QR489A
HP 3PAR StoreServ 7400 16Gb Virtualization Base System SAN Kit
QR510A
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 13
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information










A minimum of one (1) configuration base must be ordered.
The HP 3PAR StoreServ 7200c base configuration includes (2) controller
nodes, 40 GB of cache, (24) small form factor drive bays, (4) built-in 8
Gb/sec FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host
adapter cards - one slot per node, (2) 2m SAS cables, (1) mounting rail kit,
and power cords.
The HP 3PAR StoreServ 7400c 2N base configuration includes (2) controller
nodes, 48 GB of cache, (24) small form factor drive bays, (4) built-in 8
Gb/sec FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host
adapter cards - one slot per node, (2) 2m SAS cables, (2) 1U rack filler
panels to reserve 2U of rack space above the 2-node Storage Base for a
future upgrade to a 4-node configuration, (1) mounting rail kit, and power
cords.
The HP 3PAR StoreServ 7400c 4N base configuration includes (4) controller
nodes, 96 GB of cache, (48) small form factor drive bays, (8) built-in 8
Gb/sec FC ports, (8) 8Gb shortwave FC SFP, (4) PCIe adapter slots for host
adapter cards - one slot per node, (4) 2m SAS cables, (4) node link cables,
(2) mounting rail kits, and power cords.
The HP 3PAR StoreServ 7440c 2N base configuration includes (2) controller
nodes, 96 GB of cache, (24) small form factor drive bays, (4) built-in 8
Gb/sec FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host
adapter cards - one slot per node, (2) 2m SAS cables, (2) 1U rack filler
panels to reserve 2U of rack space above the 2-node Storage Base for a
future upgrade to a 4-node configuration, (1) mounting rail kit, and power
cords.
The HP 3PAR StoreServ 7440c 4N base configuration includes (4) controller
nodes, 192 GB of cache, (48) small form factor drive bays, (8) built-in 8
Gb/sec FC ports, (8) 8Gb shortwave FC SFP, (4) PCIe adapter slots for host
adapter cards - one slot per node, (4) 2m SAS cables, (4) node link cables,
(2) mounting rail kits, and power cords.
The HP 3PAR StoreServ 7200 base configuration includes (2) controller
nodes, 24 GB of cache, (24) small form factor drive bays, (4) built-in 8
Gb/sec FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host
adapter cards - one slot per node, (2) 2m SAS cables, (1) mounting rail kit,
and power cords.
The HP 3PAR StoreServ 7400 2-node base configuration includes (2)
controller nodes, 32 GB of cache, (24) small form factor drive bays, (4)
built-in 8 Gb/sec FC ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots
for host adapter cards - one slot per node, (2) 2m SAS cables, (2) 1U rack
filler panels to reserve 2U of rack space above the 2-node Storage Base for
a future upgrade to a 4-node configuration, (1) mounting rail kit, and power
cords.
The HP 3PAR StoreServ 7400 4-node base configuration includes (4)
controller nodes, 64 GB of cache, (48) small form factor drive bays, (8)
built-in 8 Gb/sec FC ports, (8) 8Gb shortwave FC SFP, (4) PCIe adapter slots
for host adapter cards - one slot per node, (4) 2m SAS cables, (4) node link
cables, (2) mounting rail kits, and power cords.
The HP 3PAR StoreServ 7200 8Gb H-Series Base System SAN Kit includes
the QR482A HP 3PAR StoreServ 7200 2-node Storage Base, (2) BK780B HP
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 14
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information



SN6000 Stackable 8 Gb/s 8 Active Port Single Power Supply FC Switches
and (4) TA821A 4-port FC Switch Upgrade LTUs. Each switch comes with
serial cable, mounting rail kits, power cords, and SAN Connection Manager
software entitlement. Also included is a 3 year warranty for the switches.
NOTE: Requires optical transceivers and switch cabling which must be
supplied separately.
The HP 3PAR StoreServ 7200 16Gb Virtualization Base System SAN Kit
includes the HP 3PAR StoreServ 7200 2-node Storage Base and (2) QK753B
HP SN6000B 16 Gb/s 48-port/24-port Active FC Switches - dual power.
Each switch comes with rack mount kit (including rails, mounting hardware,
and plenum), RJ-45 serial cable with adaptor for RJ-45 to DB9, power
cords, and SAN Network Advisor DVD. Also included is a 3 year warranty for
the switches.
NOTE: Requires optical transceivers and switch cabling which must be
supplied separately.
The HP 3PAR StoreServ 7400 16Gb Virtualization Base System SAN Kit
includes the HP 3PAR StoreServ 7400 2-node Storage Base and (2) QK753B
HP SN6000B 16 Gb/s 48-port/24-port Active FC Switches -dual power. Each
switch comes with rack mount kit (including rails, mounting hardware, and
plenum), RJ-45 serial cable with adaptor for RJ-45 to DB9, power cords,
and SAN Network Advisor DVD. Also included is a 3 year warranty for the
switches.
NOTE: Requires optical transceivers and switch cabling which must be
supplied separately.
All base configurations include (1) built-in 1GbE port for management and
(1) 1GbE port for either Remote Copy over IP or File Persona, per node
(support for File Persona only on 7000c models).
*Storage Centric Configuration


The Storage Centric rack versions of HP 3PAR StoreServ 7200 and 7400 are
for CTO (factory Configure-To-Order) only. With a Storage Centric
configuration, the storage system gets placed in the center of the rack so
that future expansion of that storage system becomes easier.
In Storage Centric configurations, non-3PAR components, with the
exception of certain StoreFabric Storage Networking switches, if added to
the same order, get placed in a separate rack.
The following diagrams show a HP 3PAR StoreServ 7400c 4N Storage System in Storage Centric and non-Storage Centric
configurations
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 15
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
StoreServ 7400c 4N Storage system in a storage centric
configuration in a HP Intelligent Series Rack
StoreServ 7400c 4N Storage system in a non-storage centric
configuration in a HP Intelligent Series Rack
HP 3PAR StoreServ 7000 Upgrade Controller Node Pair
Use the HP 3PAR StoreServ 7400c Upgrade Node Pair to convert an existing previously installed HP 3PAR StoreServ 7400c 2N
Storage Base into a 4-node configuration.
HP 3PAR StoreServ 7400c Upgrade Node Pair


QR515A
Used to upgrade the E7X71A HP 3PAR StoreServ 7400c 2N Storage Base to
a 4-node configuration.
One (1) pair of controller nodes beyond the base configuration is supported
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 16
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information


on the 3PAR StoreServ 7400c.
The 3PAR StoreServ 7400c Upgrade Node Pair includes (2) controller nodes,
48 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC
ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter
cards - one slot per node, (2) 2m SAS cables, (4) node link cables, (1)
mounting rail kit, and power cords
The upgrade node pair includes (1) built-in 1GbE port for management and
(1) 1GbE port for either Remote Copy over IP or File Persona, per node.
Use the HP 3PAR StoreServ 7440c Upgrade Node Pair to convert an existing previously installed HP 3PAR StoreServ 7440c 2N
Storage Base into a 4-node configuration.
HP 3PAR StoreServ 7440c Upgrade Node Pair




E7X83A
Used to upgrade the E7X80A HP 3PAR StoreServ 7440c 2N Storage Base to
a 4-node configuration.
One (1) pair of controller nodes beyond the base configuration is supported
on the 3PAR StoreServ 7440c.
The 3PAR StoreServ 7440c Upgrade Node Pair includes (2) controller nodes,
48 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC
ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter
cards - one slot per node, (2) 2m SAS cables, (4) node link cables, (1)
mounting rail kit, and power cords
The upgrade node pair includes (1) built-in 1GbE port for management and
(1) 1GbE port for either Remote Copy over IP or File Persona, per node.
Use the HP 3PAR StoreServ 7400 Upgrade Node Pair to convert an existing previously installed HP 3PAR StoreServ 7400 2N
Storage Base into a 4-node configuration.
HP 3PAR StoreServ 7400 Upgrade Node Pair




QR484A
Used to upgrade the QR483A HP 3PAR StoreServ 7400 2N Storage Base to a
4-node configuration.
One (1) pair of controller nodes beyond the base configuration is supported
on the 3PAR StoreServ 7400.
The 3PAR StoreServ 7400 Upgrade Node Pair includes (2) controller nodes,
32 GB of cache, (24) small form factor drive bays, (4) built-in 8 Gb/sec FC
ports, (4) 8Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter
cards - one slot per node, (2) 2m SAS cables, (4) node link cables, (1)
mounting rail kit, and power cords
The upgrade node pair includes (1) built-in 1GbE port for management and
(1) 1GbE port for either Remote Copy over IP, per node.
Step 2 - Choose Host Adapter
Host adapters can be ordered separately to be installed in the field or they can be factory configured into controller nodes. Host
adapter cards provide the array with additional FC ports or with 10Gb/sec iSCSI/FCoE ports. The additional FC ports can be used for
connection to hosts or used to connect to other HP 3PAR StoreServ Storage systems in a Remote Copy relationship. The
iSCSI/FCoE ports permit host connection in iSCSI and FCoE environments.
NOTE: Ethernet Adapters can be used only with the HP 3PAR File Persona Software Suite for File services connectivity.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 17
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
HP 3PAR StoreServ 7000 Host Adapters
HP 3PAR StoreServ 7000 4-port 8Gb/sec Fibre Channel Adapter
QR486A
HP 3PAR StoreServ 7000 2-port 10Gb/sec iSCSI/FCoE Adapter
QR487A
HP 3PAR StoreServ 7000 2-port 16Gb/s Fibre Channel Adapter
E7X47A
HP 3PAR StoreServ 7000 2-port 10Gb/s Ethernet Adapter
E7X96A
HP 3PAR StoreServ 7000 4-port 1Gb/s Ethernet Adapter
E7X97A










Fibre Channel (QR486A, E7X47A) and iSCSI/FCoE Adapters (QR487A) are
used in the Storage Base products (E7X67A, E7X71A, E7X75A, E7X80A,
E7X86A, QR482A, QR483A, and QR485A) and the Upgrade Node Pair
(QR515A, E7X83A, and QR484A).
Ethernet Adapters (E7X96A, E7X97A) can be used exclusively with the HP
3PAR File Persona Software Suite on the HP 3PAR StoreServ 7200c, 7400c,
and 7440c Storage Base products (E7X67A, E7X71A, E7X75A, E7X80A,
E7X86A) and Upgrade Node Pair (QR515A, E7X83A).
The 10Gb/s Ethernet Adapter (E7X96A) includes the the 10Gb/s SR SFP+
Direct Attach Copper (DAC) is not supported with the 10Gb/s Ethernet
Adapter (E7X96A)
Because the Storage Base products and the Upgrade Node Pair include
built-in FC ports, the host adapter cards are optional.
QR486A and QR487A include one adapter card each. Adapters must be
purchased in pairs.
The QR486A includes (4) 8 Gb/s shortwave FC SFPs. The QR487A includes
(2) 10 Gb/s SFPs. The E7X47A includes (2) 16 Gb/s shortwave FC SFPs.
Each node in a node pair (a node pair is composed of the two controller
nodes in a single 2U enclosure) must have the same number and type of
adapters. FC, iSCSI/FCoE, and GbE adapters may not be intermixed in a
node pair.
The 4 ports of the FC adapter can be individually configured to connect to a
host or to a remote array in an RC configuration.
The two ports of the iSCSI/FCoE adapter can be individually configured by
the user as iSCSI or FCoE.
Adapter Configurations permitted on all HP 3PAR StoreServ 7000 systems
Product
Nodes
A*
B*
C*
E7X67A
E7X71A
E7X80A
QR482A
QR483A
QR511A
QR512A
E7X76A
QR482A
QR483A
E7X65A
Node 0
Node 1
Empty
Empty
FC
FC
iSCSI/FCoE
iSCSI/FCoE
D
E
F*
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
G
H* I*
Page 18
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
E7X69A
E7X78A
E7W49A
E7W50A
QR515A
E7X83A
QR484A
Node 2
Node 3
Empty
Empty
FC
FC
iSCSI/FCoE
iSCSI/FCoE
E7X75A
E7X86A
QR485A
QR513A
E7X81A
QR485A
E7X73A
E7X84A
E7W51A
Node 0
Node 1
Node 2
Node 3
Empty
Empty
Empty
Empty
FC
FC
Empty
Empty
iSCSI/FCoE
iSCSI/FCoE
Empty
Empty
Empty
Empty
FC
FC
Empty
Empty
iSCSI/FCoE
iSCSI/FCoE
FC
FC
iSCSI/FCoE
iSCSI/FCoE
iSCSI/FCoE
iSCSI/FCoE
FC
FC
FC
FC
FC
FC
iSCSI/FCoE
iSCSI/FCoE
iSCSI/FCoE
iSCSI/FCoE
* Factory default configurations for given quantities of adapters.
NOTE: If the configuration includes Remote Copy over Fibre Channel it is recommended that optional Fiber Channel HBAs are
purchased as the built in ports will not offer sufficient connectivity.
Ethernet Adapter Configurations permitted on HP 3PAR StoreServ 7200c, 7400c, 7440c
Product
Nodes
A*
B*
E7X67A
E7X71A
E7X80A
QR511A
QR512A
E7X76A
E7X65A
E7X69A
E7X78A
Node 0
Node 1
Empty
Empty
Eth
Eth
QR515A
E7X83A
Node 2
Node 3
Empty
Empty
Eth
Eth
E7X75A
E7X86A
QR513A
E7X81A
E7X73A
E7X84A
Node 0
Node 1
Node 2
Node 3
Empty
Empty
Empty
Empty
Eth
Eth
Empty
Empty
C
D
E
F*
G*
H*
Empty
Empty
Eth
Eth
Eth
Eth
FC
FC
Eth
Eth
iSCSI/FCoE
iSCSI/FCoE
FC
FC
Eth
Eth
iSCSI/FCoE
iSCSI/FCoE
Eth
Eth
Eth
Eth
Eth
Eth
* Factory default configurations for given quantities of adapters.
NOTE: If the configuration includes Remote Copy over Fibre Channel it is recommended that optional Fiber Channel HBAs are
purchased as the built in ports will not offer sufficient connectivity.
NOTE: Ethernet Adapters can be used only with the HP 3PAR File Persona Software Suite for File services connectivity
available on HP 3PAR StoreServ 7200c, 7400c, 7440c
Step 3 - Choose Drive Enclosures
Add drive enclosures to expand the configuration and to add large form factor drives to the configuration. Drive enclosures can be
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 19
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
ordered separately for installation in the field, or they can be factory configured in a rack. Drive enclosures are optional. Because
the Storage Base products and the Upgrade Node Pair include small form factor drive bays, the minimum configuration does not
require any additional drive enclosures. For larger configurations, attach drive enclosures. Each drive enclosure includes 24 drive
bays. The HP 3PAR StoreServ 7200 and 7200c support up to nine (9) added drive enclosures. The HP 3PAR StoreServ 7400
supports up to eighteen (18) added drive enclosures. The HP 3PAR StoreServ 7400c supports up to twenty-two (22) added drive
enclosures. The HP 3PAR StoreServ 7440c supports up to thirty-eight (38) added drive enclosures. The two drive enclosure types
can be intermixed in a single array.
HP M6710 2.5 inch 2U SAS Drive Enclosure
HP M6720 3.5 inch 4U SAS Drive Enclosure
Drive Enclosures
HP M6710 2.5 inch 2U SAS Drive Enclosure
QR490A
HP M6720 3.5 inch 4U SAS Drive Enclosure
QR491A
HP M6710 SFF(2.5in) SAS Field Integrated Drive Enclosure
E7X64A
HP M6720 LFF(3.5in) SAS Field Integrated Drive Enclosure
E7X66A












Each drive enclosure includes 24 drive bays, (2) IO modules, (2) 1m SAS cables,
(1) mounting rail kit, and power cables.
The M6710 2U drive enclosure provides 24 SFF drive bays arranged in a single
row.
The M6720 4U drive enclosure provides 24 LFF drive bays, arranged in four (4)
columns of six (6) slots each.
Minimum of zero (0) drive enclosures, maximum of five (5) attached to QR482A.
Minimum of zero (0) drive enclosures, maximum of nine (9) attached to QR483A.
Minimum of zero (0) drive enclosures, maximum of (18) attached to QR485A.
Drive enclosures are connected in daisy chains from the SAS ports of the
controller nodes.
The best practice is to balance the drive enclosures across the SAS ports,
remembering that the controller node enclosures include (24) drives attached to
the SAS port labeled DP-1.
The best practice when including LFF and SFF drive enclosures in the same array
is to arrange them in the rack so that all of the 2U enclosures that belong to one
node pair are together and all of the 4U enclosures for that node pair are
together. When connecting the backend SAS cables, intermix the M6710 and
M6720 enclosures on each SAS port.
With a four node configuration, the best practice is to attach the same number of
drive enclosures to each node pair.
To achieve highest availability in multi-enclosure configurations, configure a
minimum of two (2) enclosures per node pair for RAID 1, a minimum of four (4)
enclosures per node pair if RAID 5 is included, and a minimum of three (3)
enclosures per node pair if RAID 6 is included. Include enclosures containing node
pairs in the count with the M6710 enclosures.
Drive bays that are not filled with a drive must be covered with a drive blank to
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 20
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information

preserve proper air flow.
If future capacity upgrades are expected, include enough Drive Enclosures so
that there are some empty bays in each enclosure after all drives are added.
Step 4 - Choose Drives
Drives are orderable at the time the array is purchased, or can be added in the future when additional capacity is required. Unlike
other HP 3PAR StoreServ Storage systems where drives are sold in magazines of four, HP 3PAR StoreServ 7000 drives are sold as
single drives. Note that these drives are only compatible with the M6710 and M6720 drive enclosures.
HP 3PAR StoreServ 7000 SAS Drives
HP 3PAR SSDs
HP 3PAR SAS HDDs
(Performance HDDs)
HP 3PAR NL SAS HDDs
HP 3PAR StoreServ M6710 480GB 6G SAS SFF(2.5in) MLC 5yr Wty Solid State Drive
E7W54B
HP 3PAR StoreServ M6720 480GB 6G SAS LFF(3.5in) MLC 5yr Wty Solid State Drive
E7W55B
HP 3PAR StoreServ M6710 480GB 6G SAS SFF(2.5in) cMLC Solid State Drive
E7Y55A
HP 3PAR StoreServ M6720 480GB 6G SAS LFF(3.5in) cMLC Solid State Drive
E7Y56A
HP 3PAR StoreServ M6710 920GB 6G SAS SFF(2.5in) MLC 5yr Wty Solid State Drive
E7W24B
HP 3PAR StoreServ M6720 920GB 6G SAS LFF(3.5in) MLC 5yr Wty Solid State Drive
E7W25B
HP 3PAR StoreServ M6710 1.92TB 6G SAS SFF(2.5in) cMLC Solid State Drive
E7Y57A
HP 3PAR StoreServ M6720 1.92TB 6G SAS LFF(3.5in) cMLC Solid State Drive
E7Y58A
HP 3PAR StoreServ M6710 3.84TB 6G SAS SFF(2.5in) cMLC Solid State Drive
K2Q91A
HP M6710 300GB 6G SAS 15K rpm SFF (2.5-inch) Hard Drive
QR492A
HP M6710 450GB 6G SAS 10K rpm SFF (2.5-inch) Hard Drive
QR494A
HP 3PAR StoreServ M6710 600GB 6Gb SAS 10K SFF(2.5-inch) HDD
C8R72A
HP 3PAR StoreServ M6710 600GB 6G SAS 15K SFF(2.5in) Hard Drive
K0F23A
HP M6710 900GB 6G SAS 10K rpm SFF (2.5-inch) Hard Drive
QR496A
HP 3PAR StoreServ M6710 1.2TB 6G SAS 10K SFF(2.5in) Hard Drive
E7X49A
HP 3PAR StoreServ M6710 1.8TB 6G SAS 10K SFF(2.5in) Hard Drive
K0F26A
HP 3PAR StoreServ M6710 1TB 6Gb SAS 7.2K SFF(2.5-inch) Nearline HDD
QR498A
HP M6720 2TB 6G SAS 7.2K LFF (3.5-inch) Nearline Hard Drive
QR499A
HP 3PAR StoreServ M6710 2TB 6G SAS 7.2K SFF(2.5in) Nearline Hard Drive
M0S91A
HP M6720 3TB 6G SAS 7.2K LFF (3.5-inch) Nearline Hard Drive
QR500A
HP 3PAR StoreServ M6720 4TB 6G 7.2K LFF(3.5-in) SAS Nearline Hard Drive
H6Z87A
HP 3PAR StoreServ M6720 6TB 6G SAS 7.2K LFF(3.5in) Nearline Hard Drive
K0F28A


For each drive type installed in the array, the minimum recommended initial
quantity is
o SSD and SAS performance HDDs - eight (8) drives* per node pair
o Nearline HDDs - twelve (12) drives per node pair
Minimum upgrade quantity is 4 drives per node pair or 2 drives per enclosure,
whichever is larger. Best practice is to run Autonomic Rebalance (also known as
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 21
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information










HP 3PAR Encryption
SSD/HDD/LTU
tunesys) after adding the drives.
RAID 6 is strongly recommended for Nearline drives.
All node enclosures must contain either zero (0) or an even number of drives. All
drive enclosures must contain an even number of drives, with a minimum of two.
Minimum raw capacity is 1.2TB per node pair.
A best practice is to add equal numbers of drives to all enclosures compatible
with the drive type being added.
With a four node configuration, the best practice is to attach the same number
and type of drives to each node pair.
Small Form Factor (SFF)-specific configuration practices
o SFF drives may be loaded into the Storage Base enclosures, the Upgrade
Node Pair enclosure and the M6710 drive enclosure.
o SFF drives must be loaded in pairs of identical drives, beginning with the
leftmost slot, slot 0, and filling to the right, leaving no empty slots
between drives.
Large Form Factor (LFF)-specific configuration practices
o LFF drives may be loaded into the M6720 drive enclosure.
o LFF drives must be loaded in pairs of identical drives starting at the
bottom of a column, leaving no empty slots between drives in the
column. Columns of drives in the M6720 enclosure must be of the same
type (SSD or NL) and, for HDDs, the same rotational speed. Drives of
different types may not be mixed in a single column. It is permitted to
have empty columns between columns containing drives. Different
columns do not have to contain the same number of drives.
o An all LFF drive configuration is permitted, leaving the Storage Base
Enclosure empty.
SSD specific configuration practices
o SSD-only configurations are permitted.
o Maximum of 120 SSDs per node pair.
o The SFF and LFF SSDs allow the user to create SSD volumes that stripe
across SFF and LFF enclosures.
E7Y55A and E7Y56A (480GB cMLC SSD) don’t support Adaptive Flash Cache
* 8 drives support RAID 1 and RAID 5. For RAID 6 choose 12 drives.
HP 3PAR StoreServ M6710 920GB 6G SAS SFF(2.5in) FIPS Encrypted MLC Solid State Drive
E7Y52A
HP 3PAR StoreServ M6710 1.92TB 6G SAS SFF(2.5in) FIPS Encrypted cMLC Solid State
Drive
K0F27A
HP 3PAR StoreServ M6710 600GB 6G SAS 15K SFF(2.5in) FIPS Encrypted Hard Drive
K0F24A
HP 3PAR StoreServ M6710 450GB 6G SAS 10K SFF(2.5in) FIPS Encryption Hard Drive
C8R59B
HP 3PAR StoreServ M6710 900GB 6G SAS 10K SFF(2.5in) FIPS Encryption Hard Drive
C8R60B
HP 3PAR StoreServ M6710 1.2TB 6G SAS 10K SFF(2.5in) FIPS Encrypted Hard Drive
K0F25A
HP 3PAR StoreServ M6710 1TB 6Gb SAS 7.2K SFF(2.5-inch) Nearline Encryption HDD
C8R58A
HP 3PAR StoreServ M6720 2TB 6G SAS 7.2K LFF(3.5in) Nearline FIPS Encryption HDD
H6Z84A
HP 3PAR StoreServ M6720 4TB 6G SAS 7.2K LFF(3.5in) Nearline FIPS Encryption HDD
H6Z86A
HP 3PAR StoreServ M6720 6TB 6G SAS 7.2K LFF(3.5in) Nearline FIPS Encryption Hard
K0F29A
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 22
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
Drive
HP 3PAR StoreServ 7200 Data at Rest Encryption LTU
HP 3PAR StoreServ 7200 Data at Rest Encryption E-LTU
HP 3PAR StoreServ 7400 Data at Rest Encryption LTU
HP 3PAR StoreServ 7400 Data at Rest Encryption E-LTU
HP 3PAR 7440c Data Encryption LTU
HP 3PAR 7440c Data Encryption E-LTU
BC983A
BC983AAE
BC984A
BC984AAE
BD406A
BD406AAE
NOTES:










All drives within a 3PAR StoreServ encrypted array must be self-encrypted
devices. There cannot be a mixture of encrypted drives and non-encrypted drives
within the same encrypted array.
Customers have option to turn on encryption, non-disruptively, at any time;
even after data has been written to the system.
* FIPS 140-2 Validated Self-Encrypting Drives (SEDs) have been certified by the
U.S. National Institute of Standards and Technology (NIST) and Canadian
Communications Security Establishment (CSE) as meeting the Level 2 security
requirements for cryptographic modules as defined in the Federal Information
Processing Standards (FIPS) 140-2 Publication *
Strengthen the DAR solution with an optional FIPS 140-2 Level-2 validated
external key manager. Supports KMIP 1.1 for key management communications
Supports HP Enterprise Secure Key Manager 4.0 and SafeNet KeySecure k460
and k150 centralized key management
A data encryption license (LTU) is required to enable encryption on the array. One
encryption license is required for each encrypted array.
Once encryption is enabled on the HP 3PAR StoreServ Storage, it cannot be
disabled.
The local key manager is included in the HP 3PAR OS. There is not a separately
orderable part number for the local key manager.
The HP 3PAR 7200/7400 Data at Rest Encryption LTU are valid for both the HP
3PAR StoreServ 7200/7400 and HP 3PAR StoreServ 7200c/7400c Storage
systems.
The HP 3PAR 7440c Data at Rest Encryption LTU are valid only for the HP 3PAR
StoreServ 7440c Storage system.
Step 5 - Choose Service Processor Implementation
The HP 3PAR Service Processor remotely monitors the HP 3PAR StoreServ 7000 and enables remote servicing of the array. The
key capabilities of the Service Processor are to:


Enable rapid, proactive responses to issues
Provide a secure communication channel between the customer's data center and HP 3PAR Central for:
o Remote Online Software Upgrade --Upgrade software with no application disruption
o o Remote Diagnostics --Maintain key diagnostic information centrally on a historical basis
o Remote Serviceability--Provide fast predictive response and remediation
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 23
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
Each HP 3PAR StoreServ 7000 requires its own Service Processor. The Service Processor functions as the communication interface
between a customer's IP network and HP 3PAR Central by managing all service-related communications. The Service Processor
leverages the industry-standard HTTP over Secure Sockets Layer (HTTPS) protocol to secure and encrypt data communication.
The Service Processor can be deployed either as a virtual Service Processor (VSP) or a physical Service Processor. A virtual Service
Processor is included free with the base HP 3PAR Operating System. The virtual Service Processor can be installed on a customerprovided VMware or Microsoft Hyper-V system that meets the following specifications:


Virtualization operating system
o VMware vSphere ESXi 4.1, 5.0, 5.1, 5.5
o Microsoft Hyper-V Server 2008 R2, 2012 or 2012 R2
Server features
o 2 GB RAM (minimum for the VSP Virtual Machine)
o 256 GB free disk space (minimum for the VSP Virtual Machine)
NOTE: VSP storage must not reside on the array it is managing.
o DVD ROM or DVD RW
o 1 Gb Ethernet port
o For VSP on VMware, the server must be listed in the VMware Compatibility Guide
o For VSP on Hyper-V, the server must be listed on the Windows Server Catalog
If a physical Service Processor is desired, order the following product.
Physical Service Processor
HP 3PAR 7000 Service Processor
QR516B
The physical Service Processor is a dedicated storage appliance located within the storage rack providing close proximity to the
HP 3PAR StoreServ 7000 Storage. The physical Service Processor is fully supported and maintained by HP Services. The physical
Service Processor has serial port connectivity that provides maintenance access for trouble shooting capabilities. If a VMware
server is not available to run the virtual Service Processor, the physical Service Processor is the alternative choice for remote
monitoring and remote service.
HP 3PAR Policy Server
HP 3PAR Policy Server works to implement customer-configurable remote service access policies. Installed on a customerprovided host, Policy Server provides the customer with ultimate flexibility and control to allow or deny outbound communication
or remote service connections to and from an HP 3PAR StoreServ Storage system. Policy Server also serves as the centralized
point for collecting and storing audit logs of all diagnostic data transfers and authorized remote service connections to and from
all configured HP 3PAR Storage systems. HP 3PAR Policy Server provides the





The customer has complete control over policy administration.
A centralized policy administration for all HP 3PAR Storage systems is provided.
A centralized audit log to facilitate security audits is provided.
Up to 100 3PAR systems can be managed with a single 3PAR Policy Server license
Policy Server 6.1.5 can be run on a Virtual Machine. For the latest information on supported hypervisors, refer to Single
Point of Connectivity Knowledge for HP Storage Products (SPOCK): http://www.hp.com/storage/spock
HP 3PAR Policy Manager Software LTU
TE400B
Step 6 - Choose Cables for host connection and remote copy connection
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 24
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
The optical cables listed below support 8 Gb/s FC and 10 Gb/s iSCSI/FCoE for host connect (FC and iSCSI/FCoE) and for Remote
Copy connections (FC only). The copper1GbE cables are used for Remote Copy over IP (or File Persona only for 7000c models) and
for connection to the Management Port.
Cables
FC and 10GbE
1GbE
Direct Attach Copper
Cables*
HP 3PAR 4m 50/125 (LC-LC) Fiber Cable
QL281B
HP 3PAR 6m 50/125 (LC-LC) Fiber Cable
QR631A
HP 3PAR 10m 50/125 (LC-LC) Fiber Cable
QL266B
HP 3PAR 25m 50/125 (LC-LC) Fiber Cable
QR593A
HP 3PAR 50m 50/125 (LC-LC) Fiber Cable
QL267B
HP 3PAR 100m 50/125 (LC-LC) Fiber Cable
QL268B
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
HP 4.3m/14ft CAT5 RJ45 M/M Ethernet Cable
C7536A
HP 7.6m/25ft CAT5 RJ45 M/M Ethernet Cable
C7537A
HP 15.2m/50ft CAT5 RJ45 M/M Ethernet Cable
C7542A
HP 3COM
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HP ProCurve
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
J9281B
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9283B
HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
J9285B
HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable
J9286B
HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable
J9287B
Brocade
HP B-series SFP+ to SFP+ Active Copper 1.0m Direct Attach Cable
AP818A
HP B-series SFP+ to SFP+ Active Copper 3.0m Direct Attach Cable
AP819A
HP B-series SFP+ to SFP+ Active Copper 5.0m Direct Attach Cable
AP820A
Cisco
HP C-series SFP+ to SFP+ Active Copper 7.0m Direct Attach Cable
QK701A
NOTE: The Direct Attach Support is available only for iSCSI protocol and is available
only with HP 3PAR OS version 3.1.3 and later
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 25
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
Step 7 - Choose Racking Options
The HP 3PAR StoreServ 7000 is compatible with most industry standard 4-post EIA 19 inch racks with square mounting holes,
including the HP Intelligent Series Rack and the HP 10000 G2 Series Rack. The HP 3PAR StoreServ 7000 can be factory configured
and shipped in a rack or shipped without a rack for field integration into an existing rack. The rack used for factory integration is the
HP Intelligent Series Rack.
HP Rack and Rack Options
Factory
Integration
Select a rack to house your HP 3PAR StoreServ 7000.
NOTE: The HP Intelligent Series Rack is the only series supported for factory configuration.
Primary
Configuration
Rules
The HP 3PAR StoreServ 7000 will be configured into an HP Intelligent Series Rack with the
appropriate power distribution units (PDUs). If other products such as servers or back-up products
are included in the cab, a different PDU will be added (if required) or can be chosen from a list of
appropriate offerings shown in the configuration tool. The HP Intelligent Series Rack must be
purchased for factory configuration. Additional 3PAR StoreServ 7000 controller node enclosures
and drive enclosures may be ordered for multiple subsystem integration at the factory.
The 3PAR StoreServ 7000 is also supported in HP 10000 G2 Series racks for field installation.
When calculating available U-space, assume that no space will be placed between the mounted
components. For redundancy, order PDUs in quantities of two. Refer to the Configuration and User
Guide in the Information Library at the Rack Solutions webpage.
HP Intelligent
Series Racks
NOTE: The number of components that will fit in a rack varies and is determined by the interior Uspace of the rack.
HP 647 1075mm Shock Intelligent Rack
BW912A
HP 47U 1075mm Side Panel Kit
BW915A
HP 642 1075mm Shock Intelligent Rack
BW904A
HP 42U 1075mm Side Panel Kit
BW906A
HP 636 1075mm Shock Intelligent Rack
BW896A
HP 36U 1075mm Side Panel Kit
BW898A
HP 642 1200mm Shock Intelligent Rack
BW908A
HP 642 Shock Intelligent Network Rack
BW966A
HP 842 Shock Intelligent Network Rack
BW968A
For more information on the HP rack offerings, please see the following URL:
http://h18004.www1.hp.com/products/servers/platforms/rackandpower.html.
For more information on rack options, see: http://www.hp.com/products/rackoptions.
For more information on PDUs, see:
http://h18004.www1.hp.com/products/servers/proliantstorage/power-protection/pdu.html.
HP PDU Pivot Kit HP EVA PDU Pivot Kit
AG730A
Used to reclaim 2U of space in an HP Intelligent Series Rack with HP 3PAR StoreServ 7000
configurations. This kit allows the PDUs to be placed in the back of the rack without requiring any
rack U space.
NOTE: The use of the PDU Pivot Kit is strongly recommended and is the default option when orders
are configured, as it will save 2U of valuable rack space.
NOTE: 0D1 will appear after this part number to indicate factory integration where appropriate.
Performance
HP 3PAR StoreServ 7000 Storage is qualified for use in HP Performance Optimized Data Centers.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 26
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
Optimized Data
Centers
Go to http://www.hp.com/go/POD for more information.
Non-HP rack and The Storage Bases, the Upgrade Node Pair, and the Drive Enclosures include mounting rails that
power
are compatible with industry standard 4-post EIA 19 inch racks with square mounting holes. For
requirements
detailed information on determining compatibility of a non-HP rack, please review the information
included in the HP 3PAR StoreServ 7000 StoreServ 7000 Site Planning Guide
Expansion Options
HP provides a variety of SAS cable kits to allow expansion of the HP3PAR StoreServ 7000. Note that the Storage Base products, the
Upgrade Node Pair and the Drive Enclosures all include SAS cables. Most configurations will not require a SAS expansion cable kit.
SAS expansion
cable kit
HP 6 Meter Expansion Cable Kit
AP879A
If an HP 3PAR StoreServ 7000 needs to be expanded into an adjacent rack, one 6 meter SAS
expansion cable kit is required for every node pair that must access drive enclosures in the
expansion rack. Each 6 meter SAS expansion cable kit contains four 6 meter SAS cables.
HP 2 Meter Expansion Cable Kit
AW566A
If an HP 3PAR StoreServ 7000 needs to be expanded within the same rack, but the new drive
enclosure must be located some distance from the nearest existing drive enclosure within the
same rack, one or two 2 meter SAS expansion cable kits is needed, depending on configuration.
Each 2 meter SAS expansion cable kit contains two 2 meter SAS cables.
HP 1 Meter SAS Expansion Cable Kit
QR514A
The 1 meter SAS expansion cable kit is provided for cases where a shorter SAS cable is required.
Each 1 meter SAS expansion cable kit contains two 1 meter SAS cables.
NOTE: The 2-node Storage Bases and Upgrade Node Pair come with four 2 meter SAS cables each
and the 4-node Storage Base comes with eight 2 meter SAS cables. The Drive Enclosures come
with two 1 meter SAS cables each.
Step 8 - Choose Software
HP provides an extensive selection of features for HP 3PAR StoreServ Storage. All of the features available on the HP 3PAR
StoreServ 10000 Storage system are also available on the HP 3PAR StoreServ 7000 Storage system, the result of a common
architecture that spans from small and medium businesses to the largest global enterprise. For convenient ordering, the 3PAR
StoreServ 7000 provides the features in Suites.
Two types of software licensing methods are employed with the HP 3PAR StoreServ 7000. Some software titles are licensed per
system; other titles are licensed by drive. With system-based licensing one license covers the whole array, independent of
configuration or capacity. Drive-based licensing, in contrast, is licensed per installed drive. A software title with drive-based
licensing includes two Licenses to Use (LTU), a Base LTU that enables the software feature for the system and a Drive LTU that
licenses the use of one drive. For each software title, purchase one Base LTU per title per array, and one Drive LTU, up to a cap, for
every drive, that is installed in the array, independent of drive type. For the HP 3PAR StoreServ 7200 the Drive LTUs cap at 48. For
the HP 3PAR StoreServ 7400 the Drive LTUs cap at 168. For the HP 3PAR StoreServ 7440c the Drive LTUs cap at 320. After reaching
the cap, you do not need to purchase any more Drive LTUs for that title.
NOTE: All the HP 3PAR 7200 Software LTU are valid for both the HP 3PAR StoreServ 7200 and HP 3PAR StoreServ 7200c Storage
systems, all the HP 3PAR 7400 Software LTU are valid for both the HP 3PAR StoreServ 7400 and HP 3PAR StoreServ 7400c Storage
systems. The HP 3PAR 7440c Software LTU are valid only for the HP 3PAR StoreServ 7440c Storage system.
For more information regarding HP 3PAR software see http://h18006.www1.hp.com/storage/solutions/3par/software.html.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 27
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
HP 3PAR 7000 Operating System Software Suite (Required)
HP 3PAR OS SW
Suite - 3PAR
Operating
System, System
Setup, and
Management
Software
HP 3PAR 7000 Operating System Software Suite is the foundation software of HP 3PAR StoreServ
7000 Storage, combining advanced virtualization capabilities with simple storage management,
high efficiency, and world class performance. The included comprehensive thin provisioning
capabilities allow your storage to start thin, get thin and stay thin. System Tuner and Autonomic
Rebalance help maintain high performance over time. Migrating your existing data from HP EVA,
EMC CX4 or EMC VNX Storage and 3PAR systems to HP 3PAR StoreServ 7000 is easy with the
included 1 year Online Import license. HP 3PAR SmartStart Software, included in the suite, guides
you through the configuration of the service processor, HP 3PAR StoreServ Storage and the
application hosts - making storage setup quick and easy. HP 3PAR 7000 Operating System
Software Suite is a required purchase. It uses drive-based licensing. For more information see
http://h18006.www1.hp.com/storage/software/3par7000/oss/index.html.
HP 3PAR 7200 Operating System Software Suite Base LTU
HP 3PAR 7200 Operating System Software Suite Base E-LTU
HP 3PAR 7200 Operating System Software Suite Drive LTU
HP 3PAR 7200 Operating System Software Suite Drive E-LTU
HP 3PAR 7400 Operating System Software Suite Base LTU
HP 3PAR 7400 Operating System Software Suite Base E-LTU
HP 3PAR 7400 Operating System Software Suite Drive LTU
HP 3PAR 7400 Operating System Software Suite Drive E-LTU
HP 3PAR 7440c Operating System Suite Base LTU
HP 3PAR 7440c Operating System Suite Base E-LTU
HP 3PAR 7440c Operating System Suite Drive LTU
HP 3PAR 7440c Operating System Suite Drive E-LTU
BC745B
BC745BAE
BC746A
BC746AAE
BC773B
BC773BAE
BC774A
BC774AAE
BD374A
BD374AAE
BD381A
BD381AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR 7000 Replication Software Suite
HP 3PAR 7000
Replication
Software Suite Local
Replication,
Remote
Replication and
Transparent
Failover
The HP 3PAR Replication Software Suite offers automatic replication, transparent failover and
Point-in-Time (PIT) copies enabling seamless disaster recovery for critical data. These features
provide an agile, efficient and simple solution to protect against the unpredictable. This suite is
ideal for virtualized data centers demanding data availability and business continuity 24x7. HP
3PAR 7000 Replication Software Suite consists of HP 3PAR Remote Copy Software, HP 3PAR Peer
Persistence Software and HP 3PAR Virtual Copy Software, which are also available separately.
Replication Software Suite uses drive-based licensing. For more information see
http://h18006.www1.hp.com/storage/software/3par7000/drs/index.html.
NOTE: The Peer Persistence feature provides transparent failover in VMware cluster environments
and requires the Remote Copy feature as a prerequisite.
HP 3PAR 7200 Replication Software Suite Base LTU
HP 3PAR 7200 Replication Software Suite Base E-LTU
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
BC747A
BC747AAE
Page 28
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
HP 3PAR 7200 Replication Software Suite Drive LTU
HP 3PAR 7200 Replication Software Suite Drive E-LTU
HP 3PAR 7400 Replication Software Suite Base LTU
HP 3PAR 7400 Replication Software Suite Base E-LTU
HP 3PAR 7400 Replication Software Suite Drive LTU
HP 3PAR 7400 Replication Software Suite Drive E-LTU
HP 3PAR 7440c Replication Suite Base LTU
HP 3PAR 7440c Replication Suite Base E-LTU
HP 3PAR 7440c Replication Suite Drive LTU
HP 3PAR 7440c Replication Suite Drive E-LTU
BC748A
BC748AAE
BC775A
BC775AAE
BC776A
BC776AAE
BD382A
BD382AAE
BD383A
BD383AAE
NOTE: If the configuration includes Remote Copy over Fibre Channel it is recommended that optional Fiber Channel HBAs are
purchased as the built in ports will not offer sufficient connectivity
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR 7000 Security Software Suite
HP 3PAR 7000
Security
Software Suite
HP 3PAR 7000 Security Software Suite provides secure administrative segregation of users and
hosts, allowing individual user groups and applications to confidently share a 3PAR StoreServ
7000 system. It also allows you to secure volumes and copies so they cannot be deleted, even by a
3PAR StoreServ 7000 user with the highest level privileges. When coupled with reservation less,
non-duplicative, read-only virtual copies (snapshots), the Virtual Lock feature enables you to
retain frozen, point-in-time copies of your data to assist internal data retention and simplify
compliance with internal governance procedures. HP 3PAR 7000 Security Software Suite consists
of HP 3PAR Virtual Domains Software and HP 3PAR Virtual Lock Software, which are also available
separately. Security Software Suite uses drive-based licensing. For more information see
http://h18006.www1.hp.com/storage/software/3par7000/ss/index.html.
HP 3PAR 7200 Security Software Suite Base LTU
HP 3PAR 7200 Security Software Suite Base E-LTU
HP 3PAR 7200 Security Software Suite Drive LTU
HP 3PAR 7200 Security Software Suite Drive E-LTU
HP 3PAR 7400 Security Software Suite Base LTU
HP 3PAR 7400 Security Software Suite Base E-LTU
HP 3PAR 7400 Security Software Suite Drive LTU
HP 3PAR 7400 Security Software Suite Drive E-LTU
HP 3PAR 7440c Security Suite Base LTU
HP 3PAR 7440c Security Suite Base E-LTU
HP 3PAR 7440c Security Suite Drive LTU
HP 3PAR 7440c Security Suite Drive E-LTU
BC751A
BC751AAE
BC752A
BC752AAE
BC779A
BC779AAE
BC780A
BC780AAE
BD384A
BD384AAE
BD385A
BD385AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 29
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
HP 3PAR 7000 Data Optimization Software Suite
Ensure Quality of
Service with
dynamic data
mobility
The HP 3PAR Data Optimization Software Suite v2 combines capabilities that provide autonomic
storage tiering and dynamic data mobility with assured quality of service. Adaptive Optimization
provides highly reliable, non-disruptive, cost-optimized storage tiering at the sub-volume level to
deliver the right QoS to the right data at the right time on a large scale and Dynamic Optimization
delivers it at the volume level. Peer Motion software enables seamless technology refresh and
cost-optimized asset lifecycle management, and lowers technology refresh capital expenditure.
Priority Optimization software allows customers to ensure quality of service on HP 3PAR
StoreServ Storage Systems. With Priority Optimization, customers can guarantee service levels in
multi-tenant environments
The Data Optimization Suite v2 bundles the following products:




HP 3PAR Adaptive Optimization
HP 3PAR Dynamic Optimization
HP 3PAR Peer Motion
HP 3PAR Priority Optimization
For more information see
http://h18006.www1.hp.com/storage/software/3par7000/dos/index.html
HP 3PAR 7200 Data Optimization Software Suite V2 Base LTU
HP 3PAR 7200 Data Optimization Software Suite V2 Base E-LTU
HP 3PAR 7200 Data Optimization Software Suite V2 Drive LTU
HP 3PAR 7200 Data Optimization Software Suite V2 Drive E-LTU
HP 3PAR 7400 Data Optimization Software Suite V2 Base LTU
HP 3PAR 7400 Data Optimization Software Suite V2 Base E-LTU
HP 3PAR 7400 Data Optimization Software Suite V2 Drive LTU
HP 3PAR 7400 Data Optimization Software Suite V2 Drive E-LTU
HP 3PAR 7440c Data Optimization Suite v2 Base LTU
HP 3PAR 7440c Data Optimization Suite v2 Base E-LTU
HP 3PAR 7440c Data Optimization Suite v2 Drive LTU
HP 3PAR 7440c Data Optimization Suite v2 Drive E-LTU
BD268A
BD268AAE
BD269A
BD269AAE
BD270A
BD270AAE
BD271A
BD271AAE
BD404A
BD404AAE
BD405A
BD405AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR File Persona Software Suite
HP 3PAR File
Persona
Software Suite
– Converged
Block, File and
Object Access
The HP 3PAR File Persona Software Suite is a licensed feature of the 3PAR OS that enables a rich
set of file protocols and core file data services on a 3PAR StoreServ system. As a feature of the
3PAR OS, the File Persona inherits the industry leading architecture and Block Persona benefits of
3PAR StoreServ. It extends the spectrum of primary storage workloads natively addressed by
3PAR StoreServ from virtualization, databases, and applications via the Block Persona to also
include client workloads such as home directory consolidation, group/department shares, and
corporate shares via the File Persona – all with truly Converged Controllers, truly agile capacity,
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 30
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
and truly unified management.
The File Persona is supported on the 3PAR StoreServ 7200c, 7400c, and 7440c. It requires the
installation of 1GbE (E7X97A) or 10GbE (E7X96A) network cards.
For more information see http:/www.hp.com/go/3PAR/FilePersona
NOTE: The File Persona feature requires HP 3PAR 7000 Operating System Software Suite as a
prerequisite.
HP 3PAR 7200c File Persona Software Suite 1TB LTU
HP 3PAR 7200c File Persona Software Suite 1TB E-LTU
HP 3PAR 7400c File Persona Software Suite 1TB LTU
HP 3PAR 7400c File Persona Software Suite 1TB E-LTU
HP 3PAR 7440c File Persona Software Suite 1TB LTU
HP 3PAR 7440c File Persona Software Suite 1TB E-LTU
BD408A
BD408AAE
BD409A
BD409AAE
BD410A
BD410AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR Reporting Software Suite
HP 3PAR
Reporting
Software Suite Historical
Performance and
Capacity
Management
Tool
The HP 3PAR Reporting Software Suite includes System Reporter, a historical performance and
capacity management tool for storage reporting, monitoring, and troubleshooting. Also included
is 3PARInfo, a command line tool that allows you to view HP 3PAR StoreServ Storage configuration
information. Reporting Software Suite uses system-based licensing. For more information see
http://h18006.www1.hp.com/storage/software/3par7000/rs/index.html.
HP 3PAR 7200 Reporting Suite LTU
HP 3PAR 7200 Reporting Suite E-LTU
HP 3PAR 7400 Reporting Suite LTU
HP 3PAR 7400 Reporting Suite E-LTU
HP 3PAR 7440c Reporting Suite LTU
HP 3PAR 7440c Reporting Suite E-LTU
BC767B
BC767BAE
BC795B
BC795BAE
BD375A
BD375AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR Application Software Suite for Oracle
HP 3PAR
Application
Software Suite
for Oracle Application
Protection
The HP 3PAR Application Software Suite for Oracle provides everything you need for protecting
Oracle databases, including Recovery Manager for Oracle and Oracle Space Reclamation
capabilities. Recovery Manager for Oracle is an extension to 3PAR Virtual Copy that intelligently
creates, manages, and presents time-consistent snapshot images of Oracle® databases for rapid
application recovery, near-continuous data protection, data sharing, and non-disruptive backup.
Application Software Suite for Oracle uses system-based licensing. For more information see
http://h18006.www1.hp.com/storage/software/3par7000/as-oracle/index.html.
NOTE: HP 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the HP
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 31
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
3PAR Replication Software Suite.
HP 3PAR 7200 Application Suite for Oracle LTU
HP 3PAR 7200 Application Suite for Oracle E-LTU
HP 3PAR 7400 Application Suite for Oracle LTU
HP 3PAR 7400 Application Suite for Oracle E-LTU
HP 3PAR 7440c Application Suite for Oracle LTU
HP 3PAR 7440c Application Suite for Oracle E-LTU
BC771B
BC771BAE
BC799B
BC799BAE
BD379A
BD379AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR Application Software Suite for SQL
HP 3PAR
Application
Software Suite
for SQL Application
Protection
The HP 3PAR Application Software Suite for SQL protects Microsoft® SQL databases with Recovery
Manager for Microsoft® SQL and the 3PAR VSS Provider software. 3PAR Recovery Manager for
Microsoft® SQL Server is an extension to 3PAR Virtual Copy that eases costs and administration by
providing rapid, affordable online recovery of Microsoft® SQL Server databases from multiple,
highly granular point-in-time snapshots. Quickly recover a database to a known point in time,
speeding up a variety of operations including rapid recovery of the production SQL server.
Application Software Suite for SQL uses system-based licensing. For more information see
http://h18006.www1.hp.com/storage/software/3par7000/as-sql/index.html.
NOTE: HP 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the HP
3PAR Replication Software Suite.
HP 3PAR 7200 Application Suite for Microsoft SQL LTU
HP 3PAR 7200 Application Suite for Microsoft SQL E-LTU
HP 3PAR 7400 Application Suite for Microsoft SQL LTU
HP 3PAR 7400 Application Suite for Microsoft SQL E-LTU
HP 3PAR 7440c Application Suite for SQL LTU
HP 3PAR 7440c Application Suite for SQL E-LTU
BC770B
BC770BAE
BC798B
BC798BAE
BD378A
BD378AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR Application Software Suite for Exchange
HP 3PAR
Application
Software Suite
for Exchange Application
Protection
The HP 3PAR Application Software Suite for Exchange provides you the essentials for protecting
your Microsoft Exchange data, including Recovery Manager for Exchange and the VSS Provider
software. Recovery Manager for Exchange is an extension to 3PAR Virtual Copy that intelligently
creates and manages snapshots that can be used to quickly restore Exchange instances or
databases (or non-disruptively back them up to tape) for near-continuous data protection.
Application Software Suite for Exchange uses system-based licensing. For more information see
http://h18006.www1.hp.com/storage/software/3par7000/as-exchange/index.html.
NOTE: HP 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the HP
3PAR Replication Software Suite.
HP 3PAR 7200 Application Suite for Microsoft Exchange LTU
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
BC769B
Page 32
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
HP 3PAR 7200 Application Suite for Microsoft Exchange E-LTU
HP 3PAR 7400 Application Suite for Microsoft Exchange LTU
HP 3PAR 7400 Application Suite for Microsoft Exchange E-LTU
HP 3PAR 7440c Application Suite for Exchange LTU
HP 3PAR 7440c Application Suite for Exchange E-LTU
BC769BAE
BC797B
BC797BAE
BD377A
BD377AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR Application Software Suite for Microsoft Hyper-V
HP 3PAR
Application
Software Suite
for Hyper-V Application
Protection
The HP 3PAR Application Software Suite for Hyper-V provides you the essentials for protecting
your Microsoft Hyper-V environment, including Recovery Manager for Hyper-V and the VSS
Provider software. Recovery Manager for Hyper-V is an extension to 3PAR Virtual Copy that
intelligently creates and manages snapshots that can be used to quickly restore Hyper-V VMs for
near-continuous data protection. Application Software Suite for Hyper-V uses system-based
licensing.
NOTE: HP 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the HP
3PAR Replication Software Suite.
HP 3PAR 7200 Application Suite for Microsoft Hyper-V LTU
BD178B
HP 3PAR 7400 Application Suite for Microsoft Hyper-V LTU
BD179B
HP 3PAR 7200 Application Suite for Microsoft Hyper-V E-LTU
BD178BAE
HP 3PAR 7400 Application Suite for Microsoft Hyper-V E-LTU
BD179BAE
HP 3PAR 7440c Application Suite for Hyper-V LTU
HP 3PAR 7440c Application Suite for Hyper-V E-LTU
BD380A
BD380AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP 3PAR Application Software Suite for VMware
HP 3PAR
Application
Software Suite
for VMware Application
Protection
The HP 3PAR Application Software Suite for VMware provides everything you need to make your
VMware environment more agile and efficient-including Recovery Manager for VMware, Host
Explorer for VMware, VASA support, and three essential plug-ins: the VMware Site Replication
Manager (SRM) Adapter, the 3PAR VAAI plug-in, and the 3PAR management plug-in for VMware
View. Application Software Suite for VMware uses system-based licensing. For more information
see http://h18006.www1.hp.com/storage/software/3par7000/as-vmware/index.html.
NOTE: HP 3PAR Virtual Copy Software is a prerequisite, purchased independently or in the HP
3PAR Replication Software Suite.
HP 3PAR 7200 Application Suite for VMware LTU
HP 3PAR 7200 Application Suite for VMware E-LTU
HP 3PAR 7400 Application Suite for VMware LTU
HP 3PAR 7400 Application Suite for VMware E-LTU
HP 3PAR 7440c Application Suite for VMware LTU
HP 3PAR 7440c Application Suite for VMware E-LTU
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
BC768B
BC768BAE
BC796B
BC796BAE
BD376A
BD376AAE
Page 33
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
HP Cluster Extension Software
HP Cluster
Extension
Software- High
Availability
HP Cluster Extension Software (CLX) offers protection against application downtime from fault,
failure, or site disaster by extending a local cluster between data centers over metropolitan
distance. CLX reinstates critical applications at a remote site within minutes or seconds after an
adverse event. CLX integrates with the OS clustering software (such as MS Cluster Service in
Windows) and the remote mirroring software on storage (such as HP Continuous Access software
on P6000 EVA/P9000 and HP 3PAR Remote Copy Software on HP 3PAR systems) to automate
failover and failback between sites. This dual integration enables the cluster service to verify the
status of the storage as well as the server cluster; thus allowing the correct failover and failback
decisions to be made which minimize downtime, and accelerates recovery without human
intervention. Thus the Cluster Extension Software can help customers achieve 'zero' RPO and RTO
in minutes or seconds. For more information, including how Cluster Extension Software is licensed,
see http://h18006.www1.hp.com/storage/software/ces/index.html.
HP StoreFront Remote SaaS Portal
HP StoreFront
Remote SaaS
Portal
The HP StoreFront Remote SaaS Portal provides proactive tools and integrated data collection
from the HP 3PAR StoreServ Storage arrays that call home to deliver unique insights and analytics
all in one dashboard. Identify capacity and performance issues early through intuitive capacity
and performance trend analysis and forecasting. These valuable analytics help maximize asset
utilization and optimize the datacenter with recommendations and remedial actions when issues
arise. Users can log into http://www.storefrontremote.com to claim their arrays and get access for
free.
Step 9 - Choose Options for Storage Networking
HP's comprehensive portfolio of Storage Area Network infrastructure products and solutions are designed to meet a range of
storage networking needs from small and midsized businesses to the largest corporate enterprises. HP StoreFabric storage
networking SAN Solutions deliver scalability, performance, and broad interoperability required for critical data and applications.
For additional details on SAN infrastructure components and options and storage compatibility information, please visit:
http://hp.com/go/san or select from the part numbers below.
Fibre Channel
Host Bus Adapters
Brocade Fibre Channel HBAs
HP 81B 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AP769B
HP 82B 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AP770B
Emulex Fibre Channel HBAs
HP 81E 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AJ762B
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AJ763B
QLogic Fibre Channel HBAs
Fibre Channel Switches
HP 81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter
AK344A
HP 82Q 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
AJ764A
HP B-series
8 Gb Fibre Channel Switches
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 34
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
HP 8/8 Base (0) e-port SAN Switch
AM866B
HP 8/8 (8) Full Fabric Ports Enabled SAN Switch
AM867B
HP 8/24 Base (16) Full Fabric Ports Enabled SAN Switch
AM868B
16 Gb Fibre Channel Switches
HP SN3000B 16Gb 24-port/12-port Active Fibre Channel Switch
QW937A
HP SN3000B 16Gb 24-port/24-port Active Fibre Channel Switch
QW938A
HP SN6000B 16Gb 48-port/24-port Active Fibre Channel Switch
QK753B
HP SN6000B 16Gb 48-port/48-port Active Fibre Channel Switch
QR480B
HP SN6000B 16Gb 48-port/24-port Active Power Pack+ Fibre Channel Switch
QK754B
HP SN6000B 16Gb 48-port/48-port Active Power Pack+ Fibre Channel Switch
QR481B
HP StoreFabric SN6500B 16Gb 96/96 Power Pack+ FC Switch
C8R42A
HP StoreFabric SN6500B 16Gb 96/96 FC Switch
C8R43A
HP StoreFabric SN6500B 16Gb 96/48 Power Pack+ FC Switch
C8R44A
HP StoreFabric SN6500B 16Gb 96/48 FC Switch
C8R45A
FCoE, Extension and Embedded Switches
HP 1606 FCIP 16-pt Enabled 8Gb FC 6-pt Enabled 1GbE Full Switch
AP863B
HP 1606 FCIP 4-pt Enabled 8Gb FC 2-pt Enabled 1GbE Base Switch
AP862B
HP 1606 FCIP 16-pt Enabled 8Gb FC 6-pt Enabled 1GbE Power Pack+ Switch
AP864B
Brocade 16Gb/16 SAN Switch for BladeSystem c-Class
C8S45A
Brocade 16Gb/28 SAN Switch for BladeSystem c-Class
C8S46A
Brocade 16Gb/28 SAN Switch Power Pack+ for BladeSystem c-Class
C8S47A
Brocade 8/12c SAN Switch for BladeSystem c-Class
AJ820B
Brocade 8/24c SAN Switch for BladeSystem c-Class
AJ821B
Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class
AJ822B
HP H-series
HP 8/20q Fibre Channel 8-ports Active Switch
NOTE: 8 device ports active, upgradeable to 20 device ports active
AQ233B
HP 8Gb Simple SAN Connection Kit
NOTE: 8 device ports active, upgradeable to 20 device ports active
AK241B
HP 8/20q Fibre Channel Switch
NOTE: 16 switch ports active, upgradeable to 20 device ports active
AK242B
HP SN6000 Stackable 8Gb 24-port Single Power Fibre Channel Switch
NOTE: 20 device ports active/4 stacking (ISL) ports active
AW575B
HP SN6000 Stackable 8Gb 24-port Dual Power Fibre Channel Switch
NOTE: 20 device ports active/4 stacking (ISL) ports active
AW576B
HP SN6000 Stackable 12-port Single Power FC Switch
NOTE: 8 device ports/4 stacking (ISL) ports active, upgradeable to 20 device
ports active
BK780B
HP C-series
HP SN6000C 8Gb 16-port Fibre Channel Switch
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
AW585A
Page 35
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
HP Intelligent Infrastructure
Analyzer Software (IIAS)
HP SN6000C 8Gb 32-port Fibre Channel Switch
AW586A
Cisco MDS 8/12c Fabric Switch for HP BladeSystem c-Class
AW563A
Cisco MDS 8/24c Fabric Switch for HP BladeSystem c-Class
AW564A
Cisco MDS 9124 8-ports Active Fabric Switch
AG646A
Cisco MDS 9124 16-ports Active Fabric Switch
AG647A
HP Intelligent Infrastructure Analyzer Software v2 LTU
TC472A
HP Intelligent Infrastructure Analyzer Software v2 E-LTU
TC472AAE
An online monitoring and diagnostic solution intended to manage the physical
layer of a Storage Area Network (SAN) consisting of HP B-series and/or H-series
Fibre Channel switches and directors. It uses industry-standard protocols (such
as SNMP, SMI-S, Telnet) to monitor the physical layer across the SAN and to
diagnose changes/events in Small Form-factor Pluggable (SFP) transceiver
states/characteristics. It also presents the SAN topology, inventory and
diagnostic information to the user in real-time.
HP Virtual Connect
HP 3PAR StoreServ 7000 Storage supports direct attach with HP Virtual Connect
FlexFabric. Please refer to SPOCK for HP Virtual Connect information.
http://h20272.www2.hp.com/index.aspx
PremierFlexOM4 cable options HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
OM3 FC LC-LC cables options
Step 10 - Federation / Data Migration
HP provides several ways to migrate your data from older arrays. Peer Motion provides federation with other 3PAR arrays, which
includes the ability to migrate data to HP 3PAR StoreServ 7000 Storage (Peer Motion is part of the HP 3PAR 7000 Data
Optimization Software Suite). Peer Motion Software is also available as a standalone license.
HP 3PAR Peer Motion
Software
HP 3PAR 7200 Peer Motion Software Base LTU
BC761A
HP 3PAR 7200 Peer Motion Software Drive LTU
BC762A
HP 3PAR 7400 Peer Motion Software Base LTU
BC789A
HP 3PAR 7400 Peer Motion Software Drive LTU
BC790A
HP 3PAR 7440c Peer Motion Base LTU
BD394A
HP 3PAR 7440c Peer Motion Base E-LTU
HP 3PAR 7440c Peer Motion Drive LTU
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
BD394AAE
BD395A
Page 36
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
HP 3PAR 7440c Peer Motion Drive E-LTU
BD395AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
Online Import allows you to easily migrate data from HP EVA, EMC CX4 or EMC VNX Storage arrays to the HP 3PAR StoreServ 7000,
a 180-day Online Import license is built into the HP 3PAR 7000 Operating System Software Suite. Additional licenses are available
to order.
HP 3PAR Online Import
Software
HP 3PAR 7200 Online Import Software 180 day LTU
BD191A
HP 3PAR 7400 Online Import Software 180 day LTU
BD192A
HP 3PAR 7440c Online Import 180-day LTU
BD407A
HP 3PAR 7440c Online Import 180-day E-LTU
BD407AAE
* Insert AE at the end of a part number for an electronic LTU (eg. XXXXBAE). E-Delivery should be ordered with any Standalone or
Upgrade software order.
In addition HP supports the MPX200.
HP MPX200 Multi-protocol and Heterogeneous Data Migration
The HP MPX200 Multiprotocol Router provides support for HP 3PAR StoreServ 7000 and 10000 as well as 3PAR F/T, including
1GbE iSCSI and 10GbE iSCSI and FCoE target support. MPX200 iSCSI provides an alternative option for HP 3PAR storage systems if
you don't want to dedicate native iSCSI ports on your array. The MPX200 also facilitates the sharing of iSCSI/FCoE connectivity
simultaneously for HP 3PAR storage systems from the same MPX200. For Data Migration the MPX200 provides high performance
migration from P6000/EVA to HP 3PAR storage systems and simplifies Data Migration from third party storage such as IBM and
EMC to HP 3PAR.The MPX200 is an ideal solution enabler for HP 3PAR customers. http://www.hp.com/go/mpx200
FCIP Software
Data Migration Software
HP MPX200 Half Chassis FCIP License
TA766A
HP MPX200 Full Chassis FCIP License
TA767A
HP MPX200 1TB Full Chassis Data Migration License
TA762A
HP MPX200 5TB Full Chassis Data Migration License
TA763A
HP MPX200 Full Chassis 1 Array Data Migration License
TA764A
Step 11- HP 3PAR StoreServ File Controller
With HP 3PAR StoreServ File Controller you get an efficient, bulletproof, and effortless way to provide file storage from HP 3PAR
StoreServ Storage. 3PAR StoreServ File Controller saves you time and money by supporting hundreds to thousands of concurrent
users and diverse file workloads .It also has non-intrusive data deduplication that provides an average 50-60% in space savings. It
provides security through features such as built-in encryption, sophisticated access controls, online snapshots, and the ability to
run endpoint protection and backup software onboard so that data is protected at rest and in flight.
HP 3PAR StoreServ File Controllers are clustered file gateway configurations with transparent failover and online rolling
maintenance updates that deliver continuous availability of data to users, servers, and applications. With a straightforward and
consistent management experience, it also provides robust capabilities for demanding 24 x 7 file storage environments.
See the HP 3PAR StoreServ File Controller QuickSpecs for more information on specifications and options at:
http://www8.hp.com/h20195/v2/GetHtml.aspx?docname=c04164476
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 37
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Configuration Information
Add a Power Cord
The HP 3Par StoreServ File Controller comes standard with at least one rack (IEC-IEC) PDU power cord. If you wish to use wall
outlet power instead, you can choose a country- or region-specific power cord.
3Par StoreServ File
Controller
HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord
AF556A
HP C13 - GB-1002 CN 250V 10Amp 1.83m Power Cord
AF557A
HP C13 - IRAM -2073 AR 250V 10A 2.5m Power Cord
AF558A
HP C13 - Nema 5-15P TH/PH 250V 10Amp 1.83m Power Cord
AF559A
HP C13 - KSC- 8305 KR 250V 10Amp 1.83m Power Cord
AF560A
HP C13 - CNS-690 TW 110V 13Amp 1.83m Power Cord
AF561A
HP C13 - IS-1293 IN 240V 6Amp LV 2.0m Power Cord
AF562A
HP C13 - AS3112-3 AU 250V 10Amp 2.5m Power Cord
AF569A
HP C13 - SEV 1011 CH 250V 10Amp 1.83m Power Cord
AF565A
HP C13 - DK-2.5A DK 250V 10Amp 1.83m Power Cord
AF566A
HP C13 - CEE-VII EU 250V 10Amp 1.83m Power Cord
AF568A
HP C13 - SI-32 IL 250V 10Amp 1.83m Power Cord
AF564A
HP C13 - CEI-23-50 IT/CL 250V 10Amp 1.83m Power Cord
AF571A
HP C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord
AF572A
HP C13 - BS-1363A UK/HK/SG 250V 10Amp 1.83m Power Cord
AF570A
HP C13 - SABS-164 ZA 250V 10Amp 2.5m Power Cord
AF567A
HP C13 - NBR-14136 BR 250V 10Amp 1.83m Power Cord
AF591A
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 38
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Technical Specifications
HP 3PAR StoreServ 7000 Product Dimensions, and Weight
Physical Dimensions
Height in/mm/U
Width in/mm
Depth in/mm
Max Weight lb/kg
42U Intelligent Series Rack
79.0/2006.6
23.5/597.8
42.7/1125.2
243/110 (empty)
HP 3PAR StoreServ 7200c
2N Storage Base (no host
adapters, no drives)
3.46/87.95/2
19/483
26.6/676.1*
47.7/21.6
HP 3PAR StoreServ 7200c
2N Storage Base (with two
host adapters, no drives)
3.46/87.95/2
19/483
26.6/676.1*
48.7/22.1
HP 3PAR StoreServ 7400c
2N Storage Base (no host
adapters, no drives)
3.46/87.95/2
19/483
26.6/676.1*
47.7/21.6
HP 3PAR StoreServ 7400c
2N Storage Base (with two
host adapters, no drives)
3.46/87.95/2
19/483
26.6/676.1*
48.7/22.1
HP 3PAR StoreServ 7400c
4N Storage Base (no host
adapters, no drives)
6.925/175.9/4
19/483
26.6/676.1*
97.8/44.4
HP 3PAR StoreServ 7400c
4N Storage Base (with four
host adapters, no drives)
6.925/175.9/4
19/483
26.6/676.1*
99.8/45.3
HP 3PAR StoreServ 7440c
2Node Storage Base (no
host adapters, no drives)
3.46/87.95/2
19/483
26.6/676.1*
47.7/21.6
HP 3PAR StoreServ 7440c
2Node Storage Base (with
two host adapters, no
drives)
3.46/87.95/2
19/483
26.6/676.1*
48.7/22.1
HP 3PAR StoreServ 7440c
4Node Storage Base (no
host adapters, no drives)
6.925/175.9/4
19/483
26.6/676.1*
97.8/44.4
HP 3PAR StoreServ 7440c
4Node Storage Base (with
four host adapters, no
drives)
6.925/175.9/4
19/483
26.6/676.1*
99.8/45.3
HP M6710 2.5 inch 2U SAS
Drive Enclosures (without
drives)
3.46/87.95/2
19/483
24.8/630.7
33.5/15.2
HP M6720 3.5 inch 4U SAS
Drive Enclosures (without
drives)
6.89/175/4
19/483
24.9/631.4
42.9/19.5
SFF SAS drive with carrier
3.42/86.85**
0.78/19.9**
896/227.7
0.7/0.32
(varies by type)
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 39
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Technical Specifications
LFF SAS drive with carrier
1.18/30.0**
4.36/110.84**
8.67/220.26
1.9/0.86
(varies by type)
* includes length of ejector handles
** includes RFI clips
Power Requirements
Input Voltage (VAC)
100 - 240 VAC
Frequency (Hz)
50 - 60
Component
Idle
(watts / BTU/hr)
Transactional
(watts / BTU/hr)
Node Pair (7200/7200c or 7400/7400c),
no drives, no add-on host adapters
236 / 803
398 / 1357
Node Pair (7440c), no drives, no add-on
host adapters
344 / 1173
363 / 1238
4-port 8Gb/s Fibre Channel Adapter
24 / 81.7
32.6 / 111
2-port 16Gb/s Fibre Channel Adapter
9.47 / 32.3
9.89 / 33.7
2-port 10Gb/s iSCSI/FCoE Adapter
34 / 115.8
40 / 136.4
2-port 10Gb/s Ethernet Adapter
5.69 / 19.4
5.71 / 19.5
4-port 1Gb/s Ethernet Adapter
1.97 / 6.7
1.97 / 6.7
HP M6710 2.5 inch 2U SAS Drive Enclosure, 150 / 512 (average)
no drives
150 / 512 (average)
HP M6720 3.5 inch 4U SAS Drive Enclosure, 164 / 559 (average)
no drives
164 / 559 (average)
300GB 15K Small Form Factor HDD
6.7 / 22.9
6.9 / 23.1
600GB 15K Small Form Factor HDD
7.0 / 24.0
7.3 / 25.1
450GB 10K Small Form Factor HDD
3.7 / 12.6
6.3 / 21.5
600 GB 10K Small Form Factor HDD
6.3 / 21.4
7.4 / 25.2
900GB 10K Small Form Factor HDD
4.8 / 16.4
6.2 / 21.1
1.2TB 10K Small Form Factor HDD
6.2 / 21.1
8.2 / 27.9
1.8TB 10K Small Form Factor HDD
7.3 / 24.8
7.5 / 25.6
1 TB 7.2k Small Form Factor NL HDD
2.95/ 10.1
3.84 / 13.1
2TB 7.2K Large Form Factor NL HDD
7.5 / 25.6
10.6 / 36.1
3TB 7.2K Large Form Factor NL NDD
8.5 / 28.9
11.8 / 40.2
4TB 7.2K Large Form Factor NL NDD
9.1 / 31.1
13.1 / 44.6
6TB 7.2K Large Form Factor NL NDD
11.9 / 40.7
14.3 / 48.74
480GB MLC SSD
2.2 / 7.5
5.5 / 18.7
920GB MLC SSD
2.2 / 7.5
5.5 / 18.7
480GB cMLC SSD
3.2 / 11
7.1 / 24.4
1920GB cMLC SSD
3.5 / 11.9
8.9 / 30.5
3840GB cMLC SSD
3.4 / 11.64
11.0 / 37.56
Environmental Specifications
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 40
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Technical Specifications
Operating Temperature
41° to 104° F (5° to 40° C) - Reduce rating by 1° F for each 1000 ft altitude (1.8°
C/1,000 m)
Shipping Temperature
32° to 140° F (0° to 60° C)
Altitude (ft/m) max.
10,000 ft / 3,048 m
Shipping Altitude (ft/m) max.
40,000ft/ 12,192 m
Humidity
10% to 90% non condensing
Shipping Humidity
10% to 90% non condensing
Operating Vibration
0.25 G, Sine, 5-500 Hz, 0.1 Grms, Random 10-100Hz
Non-operating Vibration
0.5 G, 5 - 500 Hz, Sine
Operating Shock
2 G, 11ms, half-sine
Non-operating Shock
10 G, 11ms, half-sine
Maximum Air Flow
Storage Base and Upgrade Node Pair - 109 CFM per enclosure
M6710 Drive Enclosure - 105 CFM
M6720 Drive Enclosure - 109 CFM
Electromagnetic Compatibility
CISPR 22:2008/ EN55022:2010 Class A
CISPR 24:2010/ EN 55024:2010
IEC 61000-3-2:2005/ EN 61000-3-2:2006 +A1:2009 +A2:2009
IEC/ EN 61000-3-3:2008
AS/NZS CIPSR 22: 2009 Class A
CNS 13438:2006 Class A
47 CFR Part 15 Subpart b Class A
ICES-003 Issue 4 Class A
V-3/2012.04 Class A
RRA Notice No. 2011-24 (2011.12.23) Class A
RRA Notice No. 2011-25 (2011.12.23)
Acoustics
Sound pressure level measured
per ISO 7779
specifications during normal
operating fan conditions, from a
minimum of 3,000 RPM to a
maximum of 10,000 RPM
Fan Speed
(RPM)
7200c/7400c 7400c 4N
2N Storage
Storage
Base
Base
7440c 2N
Storage
Base
7440c 4N
M6710 2.5"
Storage Base 2U SAS
Drive
Enclosure
M6720 3.5"
4U SAS
Drive
Enclosure
Minimum
63.8
67.2
72
74
62.6
61.3
Maximum
93.4
96.5
93
97
85.4
88
Safety
IEC 60950-1:2005 (2nd Edition)
EN 60950-1:2006 +A11:2009
EN 62479:2010
CNS 14336-1 2nd Edition
UL 60950-1 2nd Ed.
CAN/CSA C22.2 No. 60950-1
Certifications / Markings
cTUVus Mark
TUV T-mark (EN 60950)
CE Mark
FCC Class A
IC Class A
VCCI Class A
BSMI Class A
KCC
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 41
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Technical Specifications
GOST-R
C-Tick
WEEE
China RoHS
EU RoHS
NOTE: Specifications are subject to change without notice.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 42
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Appendix
Appendix
This Appendix includes the technical specification of the HP 3PAR StoreServ 7200 and HP 3PAR StoreServ 7400 Storage.
Summary
3PAR StoreServ 7200
3PAR StoreServ 7400
Number of Controller Nodes
2
2 or 4
HP 3PAR Gen4 ASICs
2
2 or 4
Processors
2 four-core 1.8 GHz
2 - 4 six-core 1.8 GHz
Total Cache
792 GiB
1564 GiB
Flash Cache (optional)
768 GiB
1500 GiB
On-Node Cache
24 GiB
64 GiB
792 GiB
832 GiB
Flash Cache per node pair
768 GiB
768 GiB
On-Node Cache per node pair
24 GiB
64 GiB
12 ports
24 ports
8Gb/s Fibre Channel Host Ports
4 - 12 ports
4 - 24 ports
16Gb/s Fibre Channel Host Ports
0 - 4 ports
0 - 8 ports
10Gb/s iSCSI Host Ports
0 - 4 ports
0 - 8 ports
1GbE/10GbE Network Ports
Not Applicable
Not Applicable
Maximum Initiators Supported
1024
1024 or 2048
24
24
6 - 240 drives
6 - 480 drives
61 - 120
61 - 240
1.2 - 400 TiB3
1.2 - 1200 TiB3
3PAR StoreServ 7200
3PAR StoreServ 7400
RAID 0, 1, 5, 6
RAID 0, 1, 5, 6
2:1 - 8:1
2:1 - 8:1
Total Cache per controller node pair
Maximum Host Ports
2U Controller Enclosure SAS Drive Capacity
Number of Disk Drives
Number of Solid State Drives
Raw Capacity (approx.)2
Capacity Details
RAID Levels
RAID 5 Data to Parity Ratios
RAID 6 Data to Parity Ratios
4:2, 6:2, 8:2, 10:2, 14:2
Drive Capacities (approximate GB )
(RAID levels, parity ratios, and drive capacities all
mixable within the same Storage System)
3
Number of Add-on Drive Enclosures (Each Drive
Enclosure holds up to 24 drives in 2U for small form
factor drives and 4U for large form factor drives)
4:2, 6:2, 8:2, 10:2, 14:2
200 SSD , 480 SSD , 920 SSD ,
200 SSD4, 400 SSD4, 480 SSD4, 920
480GB cMLC SSD, 1.92TB cMLC SSD, SSD4, 480GB cMLC SSD, 1.92TB cMLC
300 15K SAS, 450 10K SAS, 600 10K SSD, 300 15K SAS, 450 10K SAS, 600
SAS, 900 10K SAS, 1200 10K SAS, 10K SAS, 900 10K SAS, 1200 10K SAS,
1000 7.2K NL, 2000 7.2K NL5, 3000
1000 7.2K NL, 2000 7.2K NL5, 3000
7.2K NL5, 4000 7.2K NL5
7.2K NL5, 4000 7.2K NL5
4
4
4
0 - 9 enclosures
0 - 18 enclosures
The minimum drive quantity is permitted as long as the total raw capacity is at least 1.2 TB.
Maximum raw capacity currently supported with any and all drive types.
3
For storage capacity, 1 GB = 1,000,000,000 bytes and 1 TB = 1,000 GB.
1
2
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 43
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Appendix
SSDs are Solid State Drives.
NL drives are 7200 RPM Enterprise SAS drives.
NOTE: Specifications are subject to change without notice.
4
5
HP 3PAR StoreServ 7200 All-Flash Starter Kit
HP 3PAR StoreServ 7200 All-Flash Starter Kit is an all-flash version of the HP 3PAR StoreServ 7200 providing mid-range customers
with all-flash acceleration at entry-level price. The kit includes the HP 3PAR StoreServ 7200 Storage System Base equipped with 8 x
480GB SFF cMLC SSD drives, Reporting Suite and Virtual Copy software.
The HP 3PAR StoreServ 7200 All-Flash Starter Kit has the same Drive LTUs cap and maximum number of SSDs as the HP 3PAR
StoreServ 7200. The Drive LTUs cap for HP 3PAR StoreServ 7200 All-Flash Starter Kit is 48. After reaching the cap, you do not need
to purchase any more Drive LTUs for that title. The maximum number of SSDs is 120.
Model
HP 3PAR StoreServ 7200 All-Flash Starter Kit
K2Q09A
The HP 3PAR StoreServ 7200 All-Flash Starter Kit is an orderable part number that includes the following individual parts.
Quantity
Component
1
HP 3PAR StoreServ 7200 Storage System Base
QR482A
8
HP M6710 480GB 6G SAS 2.5in cMLC SSD
E7Y55A
1
HP 3PAR 7200 Operating System Software Suite Base LTU
BC745B
8
HP 3PAR 7200 Operating System Software Suite Drive LTU
BC746A
1
HP 3PAR 7200 Reporting Suite Base LTU
BC767B
1
HP 3PAR 7200 Virtual Copy Base LTU
BC753A
8
HP 3PAR 7200 Virtual Copy Drive LTU
BC754A
NOTE: Users can add more SSDs, drive enclosures (and any other 7000 accessory), and software to the HP 3PAR StoreServ 7200 AllFlash Starter Kit quote. Each of the nested components will appear as separate parts on the quote and will be priced accordingly
HP 3PAR StoreServ 7000 Product Dimensions, and Weight
Physical Dimensions
Height in/mm/U
Width in/mm
Depth in/mm
Max Weight lb/kg
42U Intelligent Series
Rack
79.0/2006.6
23.5/597.8
44.30/1125.2
243/110 (empty)
HP 3PAR StoreServ 7200
2-node Storage Base (no
host adapters, no drives)
3.46/87.95/2
19/483
26.6/676.1*
47.7/21.6
HP 3PAR StoreServ 7200
3.46/87.95/2
19/483
26.6/676.1*
48.7/22.1
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 44
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Appendix
2-node Storage Base
(with two host adapters,
no drives)
HP 3PAR StoreServ 7400
2-node Storage Base (no
host adapters, no drives)
3.46/87.95/2
19/483
26.6/676.1*
47.7/21.6
HP 3PAR StoreServ 7400
2-node Storage Base
(with two host adapters,
no drives)
3.46/87.95/2
19/483
26.6/676.1*
48.7/22.1
HP 3PAR StoreServ 7400
4-node Storage Base (no
host adapters, no drives)
6.925/175.9/4
19/483
26.6/676.1*
97.8/44.4
HP 3PAR StoreServ 7400
4-node Storage Base
(with four host adapters,
no drives)
6.925/175.9/4
19/483
26.6/676.1*
99.8/45.3
HP M6710 2.5 inch 2U
SAS Drive Enclosures
(without drives)
3.46/87.95/2
19/483
24.8/630.7
33.5/15.2
HP M6720 3.5 inch 4U
SAS Drive Enclosures
(without drives)
6.89/175/4
19/483
24.9/631.4
42.9/19.5
SFF SAS drive with carrier
3.42/86.85**
0.78/19.9**
896/227.7
0.7/0.32
(varies by type)
LFF SAS drive with carrier
1.18/30.0**
4.36/110.84**
8.67/220.26
1.9/0.86
(varies by type)
* includes length of ejector handles
** includes RFI clips
Environmental Specifications
Operating Temperature
41° to 104° F (5° to 40° C) - Reduce rating by 1° F for each 1000 ft altitude
(1.8° C/1,000 m)
Shipping Temperature
32° to 140° F (0° to 60° C)
Altitude (ft/m) max.
10,000 ft / 3,048 m
Shipping Altitude (ft/m) max.
40,000ft/ 12,192 m
Humidity
10% to 90% non condensing
Shipping Humidity
10% to 90% non condensing
Operating Vibration
0.25 G, Sine, 5-500 Hz, 0.1 Grms, Random 10-100Hz
Non-operating Vibration
0.5 G, 5 - 500 Hz, Sine
Operating Shock
2 G, 11ms, half-sine
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 45
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Appendix
Non-operating Shock
10 G, 11ms, half-sine
Maximum Air Flow
Storage Base and Upgrade Node Pair - 109 CFM per enclosure
M6710 Drive Enclosure - 105 CFM
M6720 Drive Enclosure - 109 CFM
Electromagnetic Compatibility
CISPR 22:2008/ EN55022:2010 Class A
CISPR 24:2010/ EN 55024:2010
IEC 61000-3-2:2005/ EN 61000-3-2:2006 +A1:2009 +A2:2009
IEC/ EN 61000-3-3:2008
AS/NZS CIPSR 22: 2009 Class A
CNS 13438:2006 Class A
47 CFR Part 15 Subpart b Class A
ICES-003 Issue 4 Class A
V-3/2012.04 Class A
RRA Notice No. 2011-24 (2011.12.23) Class A
RRA Notice No. 2011-25 (2011.12.23)
Acoustics
Fan Speed
Sound pressure level measured per ISO 7779
(RPM)
specifications during normal operating fan conditions,
from a minimum of 3,000 RPM to a maximum of 10,000 Minimum
RPM
Maximum
7200/7400 2 7400
M6710 2.5" M6720 3.5"
node Storage 4 node
2U SAS Drive 4U SAS Drive
Base
Storage Base Enclosure
Enclosure
63.8
67.2
62.6
61.3
93.4
96.5
85.4
88
Safety
IEC 60950-1:2005 (2nd Edition)
EN 60950-1:2006 +A11:2009
EN 62479:2010
CNS 14336-1 2nd Edition
UL 60950-1 2nd Ed.
CAN/CSA C22.2 No. 60950-1
Certifications / Markings
cTUVus Mark
TUV T-mark (EN 60950)
CE Mark
FCC Class A
IC Class A
VCCI Class A
BSMI Class A
KCC
GOST-R
C-Tick
WEEE
China RoHS
EU RoHS
NOTE: Specifications are subject to change without notice.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 46
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Summary of Changes
Date
02-Oct-2015
18-Sept-2015
Version History
From Version 39 to 40
From Version 38 to 39
Action
Added
Changed
17-Aug-2015
From Version 37 to 38
Changed
19-Jun-2015
05-Jun-2015
From Version 36 to 37
From Version 35 to 36
Changed
Changed
01-Jun-2015
From Version 34 to 35
Added
Changed
Deleted
03-Apr-2015
30-Mar-2015
From Version 33 to 34
From Version 32 to 33
Changed
Changed
09-Jan-2015
From Version 31 to 32
Changed
1-Dec-2014
20-Nov-2014
10-Nov-2014
29-Sep-2014
22-Aug-2014
From Version 30 to 31
From Version 31 to 30
From Version 30 to 31
From Version 29 to 30
From Version 28 to 29
Changed
Changed
Changed
Changed
Changed
20-Aug-2014
From Version 27 to 28
Changed
18-Aug-2014
18-Jul-2014
From Version 26 to 27
From Version 25 to 26
Changed
Changed
10-jun-2014
From Version 24 to 25
Changed
05-Jun-2014
01-Jun-2014
11-apr-2014
From Version 23 to 24
From Version 22 to 23
From Version 21 to 22
Changed
Changed
Changed
04-apr-2014
31-mar-2014
24-mar-2014
17-Jan-2014
From Version 20 to 21
From Version 19 to 20
From Version 18 to 19
From Version 17 to 18
Changed
Changed
Changed
Changed
Description of Change:
Added The HP StoreFront Remote SaaS Portal
Changed made to the Overview, Service and Support, and
Appendix Sections.
Updated the usable file capacity for File Persona to max
256TiB and built-in RCIP port support for File Persona
Changes were made throughout the QuickSpecs
Changes made to the Configuration, Service and Support ,
Technical Specs, Appendix and Overview Sections
New lower cost 3.84TB cMLC SSDs available
New 1.92TB FIPS Encrypted cMLC SSD available
New 1.2TB 10K, 2TB 7.2K SFF, 6TB 7.2K FIPS Encrypted HDD
available
Changes made to the Configuration, Service and Support ,
Technical Specs and Overview Sections
Removed all the File Controller Section since it now has its own
QS.
Changes made to the Models Section.
Changes made to the Service and Support, Configuration
Information and Technical Specifications Sections.
Changes made to the Overview and Technical Specifications
Sections.
Added section about HP 3PAR File Persona Software Suite
The document was reverted to version 30 at BU request.
Changes were made throughout the QuickSpecs.
Changes were made throughout the QuickSpec.
Removed this entire bullet: “Encrypted and non-encrypted
drives can be mixed in a non-encrypted array”
Changes made to the Overview section. Update some SKU
descriptions.
Changes were made throughout the QuickSpec.
Configuration section – WSS2012 R2 Upgrade section added
(D4T73A); Standard Features – Power Supply changed from 2x
460 W to 2 x 750 W;.
Overview table info, standard features resilient part; carepack
information
Change made in Overview
Change made in step 5
Overview chart, Step 11 in Configuration, Models, and
Technical Specifications chart were revised.
Corrected the images in the Configuration section.
Changes were made throughout.
Image correction.
Maximum Initiators Supported was revised in the overview
chart.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 47
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Summary of Changes
10-dec-2013
09-dec-2013
30-sep-2013
19-aug-2013
From Version 16 to 17
From Version 15 to 16
From Version 14 to 15
From Version 13 to 14
Added
Changed
Added
Changed
Added the missing image to Step 1.
Overview and Configuration were revised.
Proactive Select credits available for an additional price note
was added to Service and Support, HP Care Pack and Warranty
Information
HP 3PAR StoreServ M6710 Midline 1TB 6Gb SAS 7.2K SFF
Nearline HDD was added to Step 4 in Configuration Information
Fibre Channel Switches and HP Intelligent Infrastructure
Analyzer Software (IIAS) were revised in Configuration
Information
HP M6710 and 6720 400GB 6G SAS MLC Solid State Devices
were added to HP 3PAR SSDs in Configuration Information
HP M6710 400GB 6G SAS SFF MLC Encrypted Solid State Device
was added to HP 3PAR Encryption SSD/HDD/LTU in
Configuration Information
19-jul-2013
17-jul-2013
02-jul-2013
From Version 12 to 13
From Version 10 to 12
From Version 9 to 10
Changed
Changed/Rem
oved
Changed
HP 622 1075mm Pallet Intelligent Series Rack (22U) was
removed from HP Intelligent Series Racks in Configuration
Information
Superscript was added to the Overview chart.
Superscripts were added to the Overview chart.
Removed "600GB SAS 10K RPM Hard Disk Drive Encrypted (2.5
in)" from the What's New section.
Internal Storage for HP 3PAR StoreServ File Controller
specifications was revised
14-jun-2013
From Version 8 to 9
Changed
10-jun-2013
From Version 7 to 8
Changed
13-may-2013
From Version 6 to 7
Changed
HP 622 1075mm Pallett Intelligent Series Rack (22U) was
removed from HP Intelligent Series Racks
Changes were made to the Service and Support Section- Note
updated
Changes were made throughout the entire QuickSpec. Added
the entire new HP 3PAR StoreServ File Controller section.
Changes were made in the following sections:
21-dec-2012
From Version 4 to 5
Changed
Configuration Information: Step 5
Changes were made in the following sections:
Changed
Configuration: in Step 7 updated part description in Expansion
Options.
Changes were made in the following sections:
17-dec-2012
From Version 3 to 4
Service and Support, HP Care Pack and Warranty Information:
change made in Related Services section
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 48
QuickSpecs
HP 3PAR StoreServ 7000 Storage
Summary of Changes
14-dec-2012
From Version 2 to 3
Changed
Configuration: change made in Step 8 section.
Changes were made in the following sections:
Overview: in Summary changed text and changed "2013" to "a
later release".
Service and Support: added hyperlink and ordering
information, in Related services added a new service item.
05-dec-2012
From Version 1 to 2
Added
Configuration: in Step 1 corrected title, in Step 5 & 7 changed
2013 to a later release, in Step 8 added new software items, in
Step 9 deleted the row HP Rack and Rack Options and added
HP Virtual Contact information. Added Step 10.
Added the EMEA version.
© Copyright 2015 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
For drives, 1 TB = 1 trillion bytes. Actual formatted capacity is less.
c04164476 — DA – 14433 Worldwide — Version 40 — October 2, 2015
Page 49
Download PDF