advertisement
ITS
ITS
ITS
IP65/67
GIGABIT
eRSTP
TM
IP65/67
IP65/67
GIGABIT
IP65/67
GIGABIT
IP65/67
GIGABIT
Power Over
Ethernet
Power Over
Ethernet eRSTP
TM
ZPL
Zero-Packet-Loss™ eRSTP
TM
RuggedSwitch
eRSTP
TM
Power Over
Ethernet
®
RSG2100NC
eRSTP
TM
RoS
RoS
Rugged Operating
System™
ZPL
Zero-Packet-Loss™ eRSTP
TM
ZPL
Zero-Packet-Loss™ eRSTP
TM
ZPL
Zero-Packet-Loss™
RoS
TM
Rugged Operating
Rugged Operating
System™
System™
Rugged Operating
System™
Rugged Operating
System™
Rugged Operating
Rugged Operating
System™
The RuggedSwitch
®
RSG2100NC is an industrially hardened, fully managed, modular, Ethernet switch specifically designed to
ZPL embedded Rugged Operating System (ROS
®
ZPL
) provides improved system reliability and advanced cyber security and networking features making it ideally suited for creating secure Ethernet networks for mission-critical, real-time, control applications.
The RSG2100NC’s modular flexibility offers 10BaseFL
/100BaseFX /1000BaseX fiber and 10/100/1000BaseTX copper port combinations. Optional front or rear mount connectors make the RSG2100NC highly versatile for any application and can support multiple fiber connectors (ST, MTRJ, LC, SC) without loss of port density. The RSG2100NC is packaged in a rugged galvanized steel enclosure with industrial grade DIN, panel, or
19” rack-mount mounting options.
RuggedRated™ for Reliability in Harsh Environments
Immunity to EMI and heavy electrical surges z z z z z eRSTP
Zero-Packet-Loss™ Technology
Class 1 with copper ports or Class 2 with all fiber ports
Exceeds IEC 61850-3 (electric utility substations)
Exceeds IEC 61800-3 (variable speed drive systems)
Exceeds IEC 61000-6-2 (generic industrial)
TM
-40°C to +85°C operating temperature (no fans)
Rugged Operating
18 AWG galvanized steel enclosure
System™
Hazardous Location Certification: Class 1 Division 2
Rugged Operating System (ROS
®
) Features
negotiation, and crossover detection
RSTP (802.1w) and Enhanced Rapid Spanning
Features and Benefits
Ethernet Ports
Up to 3-Gigabit Ethernet ports - copper and/or fiber
2 port modules for tremendous flexibility
Supports many types of fiber (Multimode, singlemode, bi-directional single strand)
Long haul optics allow Gigabit distances up to 70km
Multiple connector types (ST, MTRJ, LC, SC)
Cyber Security Features
Multi-level user passwords
Enable/disable ports, MAC based port security
VLAN (802.1Q) to segregate and secure network traffic
RADIUS centralized password management
SNMPv3 authentication and 56-bit encryption
Tree (eRSTP™) network fault recovery (<5ms)
VLAN (802.1Q) with double tagging and GVRP support
IGMP Snooping for multicast filtering
Port configuration, status, statistics, mirroring, security
SNTP time synchronization (client and server)
Industrial automation features (eg. Modbus)
Management Tools
Web-based, Telnet, CLI management interfaces
Rich set of diagnostics with logging and alarms
Universal Power Supply Options
Fully integrated, dual-redundant (optional) power supplies
Popular low voltage ranges: 24VDC(10-36VDC),
48VDC (36-72VDC)
Screw or pluggable terminal blocks available
Terminal blocks for reliable maintenance free connections
CSA/UL 60950 safety approved to +85°C
RUGGEDCOM
ISO 9001
REGISTERED www.RuggedCom.com
RuggedSwitch
®
RSG2100NC
1
Modularity:
X X
X
Up to 16 Fast Ethernet ports & 3
Gigabit ports
X X
RuggedSwitch
®
RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
RuggedSwitch
®
RSG2100NC
Modularity (8x2)
Mounting Options
X
X
Panel/Din Rail
X
X X
Fast Ethernet Ports Types:
X
X up to 16 Fast Ethernet Ports
X
X copper desired
X
X
X
10FL Multimode
X
X X
Gigabit Port Types:
X
X up to 3 Gigabit Ethernet Ports
X
X
X
1000SX Multimode
X
X
X
Pluggable Optics (SFP and GBIC)
X
Modular HMI:
X X
Integrated Power Supply
X X
X
X or 85-264VAC
Popular low voltage DC ranges: 24VDC
X
(10-36VDC), 48VDC (36-59VDC)
X
X
(Optional)
X available
Operating Temperature
X
-40 o
C to +85 o
C
X X
Critical Alarm Relay
X X
Max Voltage 250VAC,125VDC
Max Current 2A@250VAC,
0.15A@125VDC, 2A@30VDC www.RuggedCom.com
RuggedSwitch
®
RSG2100NC
2
RuggedSwitch
®
RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
Cyber Security
Cyber security is an urgent issue in many industries where advanced automation and communications networks play a crucial role in mission critical applications and where high reliability is of paramount importance. Key ROS
®
features that address security issues at the local area network level include:
Passwords - Multi-level user passwords secures switch against unauthorized configuration
Enable/Disable Ports - Capability to disable ports so that traffic can not pass
802.1Q VLAN - Provides the ability to logically segregate traffic between predefined ports on switches
MAC Based Port Security - The ability to secure ports on a switch so only specific Devices / MAC addresses can communicate via that port
lock down ports on a switch so that only authorized clients can communicate via this port
providing centralized password management
SNMPv3 - encrypted authentication access security and data encryption (CBC-DES with 56-bit encryption key)
Secure Socket Layer - Web-based management using SSL with data encryption (56-bit encryption key)
RSA – 1024 bit key for key management and key exchange
Client provides cleartext authentication and authorization
Point to Point (PPP) - using CHAP (MD5 Hash) authentication service
The ROS
®
cyber security features are included to help address the various industry specific security standards such as NERC CIP, ISA S99, AGA 12, IEC 62443, ISO 17799:2005 and PCSRF SPP-ICS.
Enhanced Rapid Spanning Tree Protocol (eRSTP™)
RuggedCom eRSTP™ allows the creation of fault-tolerant ring and mesh Ethernet networks that incorporate redundant links that are ‘pruned’ to prevent loops. eRSTP™ yields worstcase fault recovery
1
of 5ms times the ‘bridge diameter’ and allows rings of up to 160 switches. For example, a ring of ten switches will have fault recovery times under 50ms. eRSTP™ implements both STP and RSTP to ensure interoperability with commercial switches unlike other proprietary ‘ring’ solutions.
Quality of Service (IEEE 802.1p)
Some networking applications such as real-time control or VoIP
(voice over IP) require predictable arrival times for Ethernet frames.
Switches can introduce latency in times of heavy network traffic due to the internal queues that buffer frames and then transmit on a first come first serve basis. ROS
®
supports ‘Class of Service’ in accordance with IEEE 802.1p that allows time critical traffic to jump ahead to the front of the queue thus minimizing latency and
ROS
®
Features
reducing jitter to allow such demanding applications to operate correctly. ROS
®
allows priority classification by port, tags, MAC address, and IP type of service (ToS).
A configurable “weighted fair queuing” algorithm controls how frames are emptied from the queues.
VLAN (IEEE 802.1Q)
Virtual local area networks (VLAN) allow the segregation of a physical network into separate logical networks with independent broadcast domains. A measure of security is provided since hosts can only access other hosts on the same VLAN and traffic storms are isolated. ROS
®
supports 802.1Q tagged Ethernet frames and VLAN trunks. Port based classification allows legacy devices to be assigned to the correct VLAN. GVRP support is also provided to simplify the configuration of the switches on the
VLAN.
Link Aggregation (802.3ad)
The link aggregation feature provides the ability to aggregate several Ethernet ports into one logical link (port trunk) with higher bandwidth. This provides an inexpensive way to set up a high speed backbone to improve network bandwidth. This feature is also known as “port trunking”, “port bundling”, “port teaming”, and “Ethernet trunk”.
IGMP Snooping
ROS
®
uses IGMP snooping (Internet Group Management
Protocol v1&v2) to intelligently forward or filter multicast traffic streams (e.g. MPEG video) to or from hosts on the network.
This reduces the load on network trunks and prevents packets from being received on hosts that are not involved. ROS a very powerful implementation of IGMP snooping that:
®
has
Can be enabled on a per VLAN basis.
subscribers exist.
Supports “router-less” operation by supporting an “active” mode.
topology change.
SNMP (Simple Network Management Protocol)
SNMP provides a standardized method for network management stations the ability to interrogate devices from different vendors. SNMP versions supported by ROS v2c, and v3.
SNMPv3 in particular provides security features such as authentication, privacy with data encryption (CBC-DES with 56-bit encryption key) and access control not present in earlier SNMP versions.
ROS
®
®
are v1,
also supports numerous standard
MIBs (Management Information Base) allowing for easy integration with any network management system (NMS).
1 eRSTP™ fault recovery times may be approximated as follows:
For 100 Mbps, fault recovery performance is <5ms/hop
For 1,000 Mbps, fault recovery performance is <5ms/hop + 20ms www.RuggedCom.com
RuggedSwitch
®
RSG2100NC
3
RuggedSwitch
®
RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
SNMP (Simple Network Management Protocol) (cont’d)
A feature of SNMP supported by ROS
®
is the ability to generate
“traps” upon system events. RuggedNMS™, the RuggedCom management solution, can record traps from multiple devices providing a powerful network troubleshooting tool. It also provides a graphical visualization of the network and is fully integrated with all RuggedCom products.
ROS
®
Features
Port Mirroring
ROS
®
can be configured to duplicate all traffic on one port to a designated mirror port. When combined with a network analyzer, this can be a powerful troubleshooting tool.
SNTP (Simple Network Time Protocol)
SNTP automatically synchronizes the internal clock of all ROS
® devices on the network. This allows for correlation of time stamped events for troubleshooting.
Port Configuration and Status
ROS
®
allows individual ports to be ‘hard’ configured for speed, duplex, auto-negotiation, flow control and more. This allows proper connection with devices that do not negotiate or have unusual settings. Detailed status of ports with alarm and SNMP trap on link problems aid greatly in system troubleshooting.
SCADA and Industrial Automation
ROS
®
contains features that optimize network performance and simplify switch management based on the unique requirements found in SCADA and industrial automation applications. Features such as Modbus TCP management for retrieval of switch data using the ubiquitous Modbus protocol and DHCP Option 82, a Rockwell Automation ODVA requirement for IP address assignment based on the location of the end device, provide capabilities not found in typical “commercial” or “office grade”
Ethernet switches.
Port Based Network Access Control (802.1x)
ROS
®
supports the IEEE 802.1x standard that defines a mechanism for port-based network access control which provides a means of authenticating and authorizing devices attached to LAN ports.
Port Statistics and RMON (Remote Monitoring)
ROS
®
provides continuously updating statistics per port that provide both ingress and egress packet and byte counters as well as detailed error figures. Also provided is full support for the RMON statistics, history, alarms, and event groups.
RMON allows for very sophisticated data collection, analysis and detection of traffic patterns.
Event Logging and Alarms
ROS
®
records all significant events to a non-volatile system log allowing forensic troubleshooting. Events include link failure and recovery, unauthorized access, broadcast storm detection, and self-test diagnostics among others.
Alarms provide a snapshot of recent events that have yet to be acknowledged by the network administrator. An external hardware relay is de-energized during the presence of critical alarms allowing an external controller to react if desired.
Port Rate Limiting
ROS
®
supports configurable rate limiting per port to limit unicast and multicast traffic. This can be essential to managing precious network bandwidth for service providers. It also provides edge security for denial of service (DoS) attacks.
HTML Web Browser and Telnet User Interfaces
ROS
®
provides a simple, intuitive user interface for configuration and monitoring via a standard graphical web browser or via
Telnet. All system parameters include detailed on-line help to make setup a breeze. ROS
®
, presents a common look and feel and standardized configuration process allowing easy migration to other RuggedCom managed products.
Broadcast Storm Filtering
Broadcast storms wreak havoc on a network and can cause attached devices to malfunction. This could be disastrous on a network with mission critical equipment. ROS
®
limits this by filtering broadcast frames with a user-defined threshold.
Loss of Link Management
Some intelligent electronic devices (IEDs) have dual fiber optic ports with automatic failover to a backup port should the primary fail. ROS
®
ensures this mechanism works reliably under all failure modes by appropriately disabling link signals when required. ROS
®
also flushes learned MAC addresses to ensure the failover occurs quickly.
Configuration via ASCII Text File
All configuration parameters are stored in an ASCII formatted text file that can easily be transferred via TFTP or Xmodem.
The configuration file can be saved for backup purposes and easily manipulated by a text editor. The same text file can be downloaded to the switch at a later date in order to re-configure or restore a previous configuration.
Command Line Interface (CLI)
A command line interface can be used in conjunction with remote shell to automate data retrieval, configuration updates, and firmware upgrades. A powerful SQL-like capability allows expert users the ability to selectively retrieve or manipulate any parameters the device has to offer.
www.RuggedCom.com
RuggedSwitch
®
RSG2100NC
4
TEST
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-29
IEC 61000-4-11
IEC 61000-4-12
IEC 61000-4-16
IEC 61000-4-17
IEC 60255-5
IEC 60255-5
Test
IEEE C37.90.3
IEEE C37.90.2
IEEE C37.90.1
IEEE C37.90.1
IEEE C37.90
IEEE C37.90
Test
IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-30
IEC 60255-21-1
IEC 60255-21-2
RuggedSwitch
®
RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
EMI and Environmental Type Tests
IEC 61850-3 EMI TYPE TESTS
ESD
Radiated RFI
Description
Burst (Fast Transient)
+/- 8kV
+/- 15kV
20 V/m
+/- 4kV @ 2.5kHz
+/- 4kV
+/- 4kV
Test Levels
Enclosure Contact
Enclosure Air
Enclosure ports
Signal ports
D.C. Power ports
A.C. Power ports
Surge
Induced (Conducted) RFI
8 Magnetic Field
Voltage Dips & Interrupts
Damped Oscillatory
Mains Frequency Voltage
Ripple on D.C. Power Supply
Dielectric Strength
H.V. Impulse
Earth ground ports
Signal ports
D.C. Power ports
A.C. Power ports
Signal ports
D.C Power ports
A.C. Power ports
Earth ground ports
Enclosure ports
D.C. Power ports
A.C. Power ports
Signal ports
D.C. Power ports
A.C. Power ports
Signal ports
D.C. Power ports
D.C. Power ports
Signal ports
D.C. Power ports
A.C. Power ports
Signal ports
D.C. Power ports
A.C. Power ports
+/- 4kV
+/- 4kV line-to-earth, +/- 2kV line-to-line
+/- 2kV line-to-earth, +/- 1kV line-to-line
+/- 4kV line-to-earth, +/- 2kV line-to-line
10V
10V
10V
10V
40 A/m continuous, 1000 A/m for 1 s
1000 A/m for 1 s
30% for 0.1s, 60% for 0.1s, 100% for 0.05s
30% for 1 period, 60% for 50 periods
100% for 5 periods, 100% for 50 periods
2.5kV common, 1kV diff. mode@1MHz
2.5kV common, 1kV diff. mode@1MHz
2.5kV common, 1kV diff. mode@1MHz
30V Continuous, 300V for 1s
30V Continuous, 300V for 1s
10%
2kVac (Fail-Safe Relay output)
1.5kV DC
2kVac
5kV (Fail-Safe Relay output)
5kV
5kV
ESD
Radiated RFI
Fast Transient
Oscillatory
H.V. Impulse
Dielectric Strength
IEEE 1613 (C37.90.x) EMI IMMUNITY TYPE TESTS
2
Description
Enclosure Contact
Enclosure Air
Enclosure ports
Signal ports
D.C. Power ports
A.C. Power ports
Earth ground ports3
Signal ports
D.C. Power ports
A.C. Power ports
Signal ports
D.C. Power ports
A.C. Power ports
Signal ports
D.C. Power ports
A.C. Power ports
Test Levels
+/-2kV, +/-4kV, +/- 8kV
+/-4kV, +/-8kV, +/-15kV
35 V/m
+/- 4kV @ 2.5kHz
+/- 4kV
+/- 4kV
+/- 4kV
2.5kV common mode @1MHz
2.5kV common, 1kV diff. mode@1MHz
2.5kV common, 1kV diff. mode@1MHz
5kV (Fail-Safe Relay output)
5kV
5kV
2kVac
1.5kV DC
2kVac
Cold Temperature
Dry Heat
Environmental Type Tests
Description
Test Ad
Test Bd
Test Levels
-40°C, 16 Hours
+85°C, 16 Hours
Test Db Humidity (Damp Heat, Cyclic)
Vibration
Shock
95% (non-condensing), 55°C , 6 cycles
2g @ (10 - 150) Hz
30g @ 11mS
Severity Levels
4
4
Note 1
Note 1
4
4
3
3
3
Note 1
5
N/A
4
4
3
4
3
N/A
N/A
4
3
N/A
N/A
N/A
N/A
3
4
3
3
N/A
N/A www.RuggedCom.com
RuggedSwitch
®
RSG2100NC
5
RuggedSwitch
®
RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
Power Supply
Power Consumption: 28W Max
24VDC: 10-36 VDC, 1.2A
48VDC: 36-72 VDC, 0.6A
HI Voltage AC/DC: 88-300VDC or 85-264VAC
Critical Alarm Relay
Form-C contact ratings:
Max Voltage 250VAC,125VDC
2A@30VDC
Physical
Height: 4.42cm / 1.74”
Width: 46.48cm / 18.3”
Depth: 31.5cm / 12.4”
Weight: 5.2kg / 11.5 lbs
Ingress Protection: IP40 (1mm objects)
Enclosure: 18 AWG galvanized steel enclosure
Mounting: DIN rail or panel mounted
Switch Properties
Switching method: Store & Forward
Switching latency: 7 us
Switching bandwidth: 9.2 Gbps
MAC addresses: 8192
MAC address table size: 64kbytes
Priority Queues: 4
Frame buffer memory: 2 Mbit
Simultaneous VLANs: 255
VLAN ID Range: 1 to 4094
IGMP multicast groups: 256
Port rate limiting
No head of line blocking
Approvals
ISO: Designed and manufactured using a ISO9001: 2000 certified quality program
CE Marking
Emissions: FCC Part 15 (Class A),
EN55022 (CISPR22 Class A)
Safety: cCSAus (Compliant with CSA C22.2 No. 60950, UL
60950, EN60950)
Laser Eye Safety (FDA/CDRH): Complies with 21
CFR Chapter1, Subchapter J.
Hazardous Locations: Class 1 Division 2
Network Management
HTTP graphical web-based, SSL (56-bit encryption)
Telnet, VT100, TFTP
RSA Key Management (1024 bit key)
Authentication and Accounting - TACACS+ (cleartext),
RADIUS client, PPP
Technical Specifications
Warranty
5 Years - Applicable to design and manufacturing related product defects.
EMI Immunity and Environmental Compliance
IEC 61000-6-2 Industrial (Generic)
IEC 61850-3 Electric Utility Substations
IEEE Compliance
802.3-10BaseT
802.3ab-1000BaseTX
802.1p-Class of Service
IETF RFC Compliance
RFC768-UDP
RFC791-IP
RFC793-TCP
RFC854-Telnet
RFC1112-IGMP v1
RFC1541-DHCP (client)
RFC2068-HTTP
RFC2284-EAP
RFC2865-RADIUS
IETF SNMP MIBS
RFC1907-SNMPv2-MIB
RFC2013-UDP-MIB
RFC2579-SNMPv2-TC
RFC2863-IF-MIB
Draft-ietf-bridge-bridgemib-smiv2-03-RSTP-MIB
www.RuggedCom.com
RuggedSwitch
®
RSG2100NC
6
RuggedSwitch
®
RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
Dimensions
www.RuggedCom.com
RuggedSwitch
®
RSG2100NC
7
RuggedSwitch
®
RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
Mounting Options
www.RuggedCom.com
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
Slot 8
Slot 9
Slot 10
RuggedSwitch
®
RSG2100NC
8
RuggedSwitch
®
RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
Order Codes
RSG2100NC
- ____ - _____ - ____ - ____ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - _____
Main Mount PS1 PS2 S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 MOD
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
Slot 7
Slot 8
Slot 9
Slot 10
Main: Ethernet and Power Connectors
R = Ethernet on rear; LED panel on front; power connector on rear
B = Ethernet on rear; LED panel on top; power connector on rear
Mount: Mounting Options
RM = 19” Rack Mount Kit
00 = No Mounting Option
PS1 and PS2: Power Supply 1 and 2
(5)
24 = 24VDC (10-36VDC), screw terminal block
HI = 88-300VDC or 85-264VAC, screw terminal block
48P = 48VDC (36-72VDC), pluggable terminal block
HIP = 88-300VDC or 85-264VAC, pluggable terminal block
XX = No Power Supply (PS2 Only)
S1, S2, S3, S4, S7, S8, S9 and S10:
Ethernet Modules for Slots 1, 2, 3, 4, 7, 8, 9 and 10
XXXX = Empty
FX02 = 2 x 100FX - Multimode, 1300nm, SC
FX05 = 2 x 100FX - Singlemode, 1310nm, SC, 20km
FX09 = 2 x 100FX - Singlemode, 1310nm, SC, 90km
FX10 = 2 x 100FX - Singlemode, 1310nm, LC, 90km
S5: Gigabit Ethernet Modules for slot 5
XXXX = Empty
CG01 = 2 x 10/100/1000Tx RJ45
FG01 = 2 x 1000SX - Multimode, 850nm, LC, 500m
FG02 = 2 x 1000LX - Singlemode, 1310nm, SC connectors, 10km
FG04 = 2 x 1000LX - Singlemode, 1310nm, SC connectors, 25km
FG05 = 2 x 1000LX - Singlemode, 1310nm, LC connectors, 25km
FG50 = 2 x 1000LX SFP - Blank (no optical transceiver)
FG51 = 2 x 1000SX SFP - Multimode, 850nm, LC, 500m
(3)
FG52 = 2 x 1000LX SFP - Singlemode, 1310nm, LC, 10km
(3)
FG53 = 2 x 1000LX SFP - Singlemode, 1310nm, LC, 25km
(3)
FG54 = 2 x 1000LX SFP - Singlemode, 1550nm, LC, 70km
FG70 = 2 x 1000LX GBIC - Blank (no optical transceiver)
(2)(3)
FG71 = 2 x 1000LX GBIC - Singlemode, 1310nm, SC, 10km
(4)
FG72 = 2 x 1000LX GBIC - Singlemode, 1310nm, SC, 25km
(4)
FG73 = 2 x 1000LX GBIC - Singlemode, 1550nm, SC, 70km
(2)(4)
S6: Gigabit Ethernet Modules for slot 6
XXXXX = Empty
1FG01 = 1 x 1000SX - Multimode, 850nm, LC, 500m
1FG03 = 1 x 1000LX - Singlemode, 1310nm, LC connectors, 10km
1FG05 = 1 x 1000LX - Singlemode, 1310nm, LC connectors, 25km
1FG51 = 1 x 1000SX SFP - Multimode, 850nm,LC, 500m
(3)
(3)
1FG53 = 1 x 1000LX SFP - Singlemode, 1310nm, LC, 25km
(3)
(2)(3)
1FG70 = 1 x 1000LX GBIC - Blank (no optical transceiver)
(4)
1FG72 = 1 x 1000LX GBIC - Singlemode, 1310nm, SC, 25km
(4)
1FG73 = 1 x 1000LX GBIC - Singlemode, 1550nm, SC, 70km
(2)(4)
MOD: Manufacturing Modifications
XX = None
C01 = Conformal Coating
Notes:
1 Distance ratings are typical but will depend on type of cabling, number of connectors and splices.
2 These transceivers have an operating temperature range of -20 °C to +85°C.
All other transceivers have an operating temperature range of -40°C to +85°C
3 SFP plugable optics that consist of a blank cage (FG50 for dual, 1FG50 for single) plus specified fiber optic interface(s) installed
4 GBIC plugable optics that consist of a blank cage (FG70 for dual, 1FG70 for single) plus specified fiber optic interface(s) installed
5 Power Supply 1 and 2 must be either both screw terminal block or both pluggable terminal block www.RuggedCom.com
RuggedSwitch
®
RSG2100NC
9
RuggedSwitch
®
RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
Example Order Codes:
RSG2100NC-R-RM-24-48-TX01-TX01-XXXX-XXXX-XXXX-
XXXXX-XXXX-XXXX-XXXX-XXXX-XX
19” Rack mounted, 24VDC power supply, 48VDC power supply,
4 10/100 RJ45 Ethernet Ports, with Ethernet ports on the rear.
RSG2100NC-F-RM-48-48-TX01-TX01-FX01-FX01-XXXX-
XXXXX-XXXX-XXXX-XXXX-XXXX-XX
19” Rack mounted, 48VDC power supply, 48VDC, 4 10/100 RJ45
Ethernet Ports, 4 100FX (Multi Mode 1300nm Fiber) Ethernet ports, with Ethernet ports on the front.
RSG2100NC-R-RM-HI-HI-TX01-TX01-FX01-FX01-FG02-
XXXXX-FX01-FX01-FX01-FX01-C01
19” Rack mounted, HI power supply, HI power supply, 4 10/100
RJ45 Ethernet Ports, 12 100FX (Multi Mode 1300nm Fiber)
Ethernet ports, 2 1000LX (Gigabit) Ethernet ports, with Ethernet ports on the front, conformal coating.
Accessories/Options
41-11-0011 - Cable support bracket (one)
43-10-0007 - Power cable
(North America three prong connector -> beau) www.RuggedCom.com
RuggedSwitch
®
RSG2100NC
10
RuggedSwitch
®
RSG2100NC
19-Port Modular Managed Ethernet Switch with Gigabit Uplink Ports, 56-bit Encryption
RuggedCom Inc.
300 Applewood Crescent, Unit 1,
Concord, Ontario, Canada L4K 5C7
Tel: +1 (905) 856-5288 Fax: +1 (905) 856-1995
Toll Free: 1 (888) 264-0006
Technical Support Center
Toll Free (USA & Canada): 1 (866) 922-7975
International: +1 (905) 856-5288
USA: +1 (954) 922-7975
E-mail: [email protected]
© 2010 RuggedCom Inc.
RuggedSwitch is a registered trademark of RuggedCom Inc.
Ethernet is a trademark of the Xerox Corporation.
Patent Pending
All specifications in this document are subject to change without notice.
Rev 3b — 04/27/10 www.RuggedCom.com
For additional information on our products and services, please visit our web site at: www.RuggedCom.com
RuggedSwitch
®
RSG2100NC
11
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement