ProCurve Switch 6200yl-24G-mGBIC

ProCurve Switch 6200yl-24G-mGBIC
The ProCurve Switch 6200yl-24G-mGBIC is an advanced Layer 3
stackable in 1U height. It has 24 mini-GBIC slots and an
expansion slot for an optional 4-port 10-GbE module. Designed
to be deployed as an aggregator of traffic from the edge to the
core of the network, this switch supports a variety of Gigabit miniGBICs, such as SX, LX, LH, and 1000Base-T. The foundation for
this switch is a purpose-built ProVision ASIC that allows the most
demanding networking features, such as QoS and security, to be
implemented in a scalable yet granular fashion. With its highperformance architecture, 10-GbE capability, and programmable
ASIC, this switch offers excellent investment protection, flexibility,
and scalability.
ProCurve Switch 6200yl-24G-mGBIC
(J8992A)
ProCurve Switch 6200yl-24G-mGBIC
Features and benefits
Management
Remote intelligent mirroring: mirrors
ingress/egress ACL-selected traffic from a
switch port or VLAN to a local or remote
8200zl/6200yl/5400zl/3500yl switch port
anywhere on the network
NEW
• RMON, XRMON, and sFlow: provide advanced
monitoring and reporting capabilities for
statistics, history, alarms, and events
• IEEE 802.1AB Link Layer Discovery Protocol
(LLDP): automated device discovery protocol
for easy mapping by network management
applications
Command authorization: leverages RADIUS
to link a custom list of CLI commands to
individual network administrator’s login;
also provides an audit trail
NEW
• Friendly port names: allow assignment of
descriptive names to ports
• Dual flash images: provides independent
primary and secondary OS files for backup
while upgrading
• Multiple configuration files: multiple config
files can be stored to flash image
NEW
USB support:
– File copy: allows users to copy switch files
to/from an USB flash drive
Uni-Directional Link Detection (UDLD):
monitors a link between two switches and
blocks the ports on both ends of the link if
the link goes down at any point between
the two devices
NEW
• Management simplicity: ProCurve-common
networking features and CLI implementation
(common across ProCurve zl and yl switches)
Connectivity
• Jumbo frames: on Gigabit and 10-Gigabit
ports, allow high-performance remote backup
and disaster-recovery services
• IPv6 ready: switch hardware is capable of
supporting IPv6 host, routing, and filtering
with the ProVision ASIC; IPv6 operation and
deployment will be available when enabled
via a software update at a later date
Performance
• Architecture: 115 Gbps backplane speed with
up to 74 million pps throughput on purposebuilt ProVision ASIC
Selectable queue configurations: increase
performance by selecting the number of
queues and associated memory buffering that
best meet the requirements of your network
applications
NEW
Resiliency and high availability
• Router redundancy: VRRP allows groups of two
routers to dynamically back each other up to
create highly available routed environments
• IEEE 802.1s Multiple Spanning Tree Protocol:
provides high link availability in multiple
VLAN environments by allowing multiple
spanning trees; encompasses IEEE 802.1D
Spanning Tree Protocol and IEEE 802.1w Rapid
Spanning Tree Protocol
• IEEE 802.3ad Link Aggregation Control
Protocol (LACP) and ProCurve trunking:
supports up to 36 trunks, each with up to
8 links (ports) per trunk; trunking across
modules is supported
Layer 2 switching
• ProCurve switch meshing: dynamically loadbalances across multiple active redundant links
to increase available aggregate bandwidth
• VLAN support and tagging: supports complete
IEEE 802.1Q standard and 2,048 VLANs
simultaneously
ProCurve Switch 6200yl-24G-mGBIC
Features and benefits
(continued)
• IEEE 802.1v protocol VLANs: isolate select
non-IPv4 protocols automatically into their
own VLANs
• GARP VLAN Registration Protocol: allows
automatic learning and dynamic assignment
of VLANs
Layer 3 services
• UDP helper function: UDP broadcasts can be
directed across router interfaces to specific IP
unicast or subnet broadcast addresses and
prevent server spoofing for UDP services such
as DHCP
Loopback interface address: defines an
address in RIP and OSPF that can always be
reachable, improving diagnostic capability
NEW
Layer 3 routing
• Layer 3 IP routing:
– Static IP routing: provides basic routing
– RIP: provides RIPv1 and RIPv2 routing
at media speed
– OSPF: includes ECMP to provide link
redundancy/scalable bandwidth and NSSA
Security
• Switch CPU protection: provides automatic
protection against malicious network traffic
trying to shut down the switch
• Virus throttling: detects traffic patterns typical
of WORM-type viruses and either throttles or
entirely prevents the ability of the virus to
spread across the routed VLANs without
requiring external appliances
• ICMP throttling: defeats ICMP denial-ofservice attacks by enabling any switch port
to automatically throttle ICMP traffic
• Multiple user authentication methods:
– IEEE 802.1X: industry-standard way of user
authentication using an IEEE 802.1X
supplicant on the client in conjunction
with a RADIUS server
– Web-based authentication: similar to
IEEE 802.1X, provides a browser-based
environment to authenticate clients that
do not support the IEEE 802.1X supplicant
– MAC-based authentication: client is
authenticated with the RADIUS server based
on the MAC address of the client
• Authentication flexibility:
– Multiple IEEE 802.1X users per port:
provides authentication of multiple
IEEE 802.1X users per port; prevents user
“piggybacking” on another user’s IEEE 802.1X
authentication
– Concurrent IEEE 802.1X and Web or MAC
authentication schemes per port: switch
port will accept any of IEEE 802.1X and either
Web or MAC authentications
• Access control lists (ACLs): provide filtering
based on the IP field, source/destination IP
address/subnet, and source/destination
TCP/UDP port number on a per-VLAN or perport basis
• Identity-driven ACL: enables implementation
of a highly granular and flexible access security
policy specific to each authenticated network
user
DHCP protection: blocks DHCP packets from
unauthorized DHCP servers, preventing denialof-service attacks
NEW
BPDU port protection: blocks Bridge
Protocol Data Units (BPDU) on ports that do not
require BPDUs, preventing forged BPDU attacks
NEW
ProCurve Switch 6200yl-24G-mGBIC
Dynamic IP lockdown: works with DHCP
protection to block traffic from unauthorized
hosts, preventing IP source address spoofing
NEW
Dynamic ARP protection: blocks ARP
broadcasts from unauthorized host, preventing
eavesdropping or data theft of network data
• Security banner: displays customized security
policy when users log in to the switch
Convergence
NEW
Detection of malicious attacks: monitors
10 types of network traffic and sends a
warning when an anomaly that potentially can
be caused by malicious attacks is detected
NEW
• Port security: allows access only to specified
MAC addresses, which can be learned or
specified by the administrator
• MAC address lockout: prevents configured
particular MAC addresses from connecting
to the network
• Source-port filtering: allows only specified
ports to communicate with each other
• TACACS+: eases switch management security
administration by using a password
authentication server
• Secure Shell (SSHv2): encrypts all transmitted
data for secure, remote command-line
interface (CLI) access over IP networks
• Secure Sockets Layer (SSL): encrypts all HTTP
traffic, allowing secure access to the browserbased management GUI in the switch
• Secure FTP: allows secure file transfer to/from
the switch; protects against unwanted file
downloads or unauthorized copying of switch
configuration file
• IP multicast routing: includes PIM Sparse and
Dense modes to route IP multicast traffic
• IP multicast snooping (data-driven IGMP):
automatically prevents flooding of IP multicast
traffic
• LLDP-MED (Media Endpoint Discovery):
a standard extension of LLDP that stores values
for parameters such as QoS and VLAN to
automatically configure network devices such
as IP phones
Quality of Service (QoS)
• Layer 4 prioritization: enables prioritization
based on TCP/UDP port numbers
• Traffic prioritization: allows real-time traffic
classification into 8 priority levels mapped to
8 queues
• Bandwidth shaping:
– Rate limiting: per-port ingress/egress
enforced maximum bandwidth
– Guaranteed minimum: per-port, per-queue
egress-based guaranteed minimum
bandwidth
• Class of Service (CoS): sets the IEEE 802.1p
priority tag based on IP address, IP Type of
Service (ToS), L3 protocol, TCP/UDP port
number, source port, and DiffServ
Industry-leading warranty
• Secure management access: all access
methods—CLI, GUI, or MIB—are securely
encrypted through SSHv2, SSL, and/or SNMPv3
• Switch management logon security:
can require either RADIUS or TACACS+
authentication for secure switch CLI logon
• Lifetime warranty: for as long as you own
the product, with next-business-day advance
replacement (available in most countries)
ProCurve Switch 6200yl-24G-mGBIC
Services
• 3-year, 4-hour onsite, 13x5 coverage for
hardware (U2855E)
• 3-year, 4-hour onsite, 24x7 coverage for
hardware (U2856E)
• 3-year, 4-hour onsite, 24x7 coverage for
hardware, 24x7 software phone support
(U6304E)
• 3-year, 24x7 software phone support, software
updates (UE262E)
• Installation with minimum configuration,
system-based pricing (U4826E)
• Installation with HP-provided configuration,
system-based pricing (U4830E)
Check www.procurve.eu/services for part
numbers and service-level descriptions.
For details about services and response times
in your area, please contact your local HP sales
office.
ProCurve Switch 6200yl-24G-mGBIC
Specifications
ProCurve Switch 6200yl-24G-mGBIC (J8992A)
Ports
Physical characteristics
Dimensions (D x W x H)
Weight
Memory and processor
Processor
1 open module slot
24 open mini-GBIC (SFP) slots
Supports a maximum of 4 10-GbE ports, with optional module
39.2 x 44.3 x 4.4 cm (15.43 x 17.44 x 1.73 in.) (1U height)
6.4 kg (14.11 lb.)
Freescale PowerPC 8540 @ 666 MHz
4 MB Flash
256 MB DDR SDRAM
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
Latency
1000 MB:
10 Gbps:
Throughput
Routing/Switching capacity
Switching capacity
Routing table size
<3.7 µs (FIFO 64-byte packets)
<2.1 µs (FIFO 64-byte packets)
Up to 74 million pps
101 Gbps
115 Gbps
10,000 entries
Environment
Operating temperature
Operating relative humidity
Non-operating/Storage temperature
Non-operating/Storage relative humidity
Altitude
Acoustic
0°C to 55°C (32°F to 131°F); 0°C to 40°C (32°F to 104°F) when used with any X2 10-GbE
15% to 95% at 40°C (104°F), non-condensing
–40°C to 70°C (–40°F to 158°F)
15% to 95% at 65°C (149°F), non-condensing
Up to 4.6 km (15,000 ft.)
Power: 55.1 dB; DIN 45635T.19 per ISO 7779
Electrical characteristics
Description
Maximum heat dissipation
Voltage
Current
Power consumption
Frequency
The switch automatically adjusts to any voltage between 100–127 and 200–240 volts and either 50 or 60 Hz
875 kJ/hr (829 BTU/hr)
100–127 VAC/200–240 VAC
1.8 A/0.9 A
243 W
50/60 Hz
Safety
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
Emissions
FCC Class A; EN 55022/CISPR 22 Class A; VCCI Class A
Immunity
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
EN 55024, CISPR 24
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV/2 kV AC
IEC 61000-4-6; 3 V
IEC 61000-4-8; 1 A/m, 50 or 60 Hz
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3
Management
ProCurve Manager Plus; ProCurve Manager (included); command-line interface; Web browser; configuration menu; out-of-band management
(serial RS-232C)
Notes
When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g. J4858B,
J4859C) are required.
ProCurve Switch 6200yl-24G-mGBIC
Specifications
(continued)
ProCurve Switch 6200yl-24G-mGBIC (J8992A)
Standards and protocols
Device management
RFC 1591 DNS (client)
HTML and telnet management
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Reconfiguration of
Spanning Tree
IEEE 802.3ad Link Aggregation Control
Protocol (LACP)
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 951 BOOTP
RFC 1058 RIP v1
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 2030 Simple Network Time Protocol
(SNTP) v4
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 3046 DHCP Relay Agent Information
Option
RFC 3768 VRRP
UDLD (Uni-directional Link Detection)
IP multicast
RFC 2362 PIM Sparse Mode
RFC 3376 IGMPv3 (host joins only)
RFC 3973 PIM Dense Mode
MIBs
RFC 1213
RFC 1493
RFC 1724
RFC 1850
RFC 2021
RFC 2096
RFC 2613
RFC 2618
RFC 2620
RFC 2665
RFC 2668
RFC 2674
MIB
RFC 2737
RFC 2787
RFC 2863
RFC 2925
MIB II
Bridge MIB
RIPv2 MIB
OSPF v2 MIB
RMONv2 MIB
IP Forwarding Table MIB
SMON MIB
RADIUS Client MIB
RADIUS Accounting MIB
Ethernet-Like-MIB
802.3 MAU MIB
802.1p and IEEE 802.1Q Bridge
Entity MIB (Version 2)
VRRP MIB
The Interfaces Group MIB
Ping MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol
(LLDP)
RFC 2819 Four groups of RMON:
1 (statistics), 2 (history), 3 (alarm), and
9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint
Discovery (LLDP-MED)
SNMPv1/v2c/v3
XRMON
OSPF
RFC 2328 OSPFv2
RFC 3101 OSPF NSSA
QoS/Cos
RFC 2474 DiffServ Precedence, including
8 queues/port
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)
Security
IEEE 802.1X Port Based Network Access
Control
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv1/SSHv2 Secure Shell
ProCurve Switch 6200yl-24G-mGBIC Modules
Additional accessories
ProCurve 10-GbE X2-SC SR Optic (J8436A)
ProCurve Switch yl 10-GbE 2-Port CX4 + 2-Port X2
Module (J8694A)
ProCurve 10-GbE X2-SC LR Optic (J8437A)
10-GbE module with two fixed CX4 ports and two X2 slots for ProCurve
Switch 3500yl series and Switch 6200yl-24G-mGBIC
ProCurve 10-GbE X2-SC ER Optic (J8438A)
Ports
2 open 10-GbE X2 transceiver slots
2 10-GbE ports (IEEE 802.3ak Type 10Gbase-CX4)
Duplex: full only
Physical characteristics
Dimensions (D x W x H): 19.7 x 19.1 x 36.3 cm (7.76 x 7.52 x 14.29 in.)
Weight: 7 kg (1.54 lb.)
Environment
Operating temperature: 0°C to 55°C (32°F to 131°F)
Operating relative humidity: 15% to 95%, non-condensing
Non-operating/Storage temperature: –40°C to 70°C (–40°F to 158°F)
Non-operating/Storage relative humidity: 15% to 90%, non-condensing
Maximum distance
CX4: 15 m using CX4 cable or 300 m using media converter with ribbon MMF
Notes
Only the two fixed CX4 ports on this module support ProCurve 10-GbE CX4
Media Converter (J8439A).
Operating temperature is 0°C to 40°C (32°F to 104°F) if any X2 10-GbE
optic or transceiver is inserted in any X2 slot.
One 0.5 m CX4 cable is included.
ProCurve 10-GbE CX4 Media Converter (J8439A)
ProCurve 10-GbE X2-CX4 Transceiver (J8440B)
ProCurve Gigabit-SX-LC Mini-GBIC (J4858C)
ProCurve Gigabit-LX-LC Mini-GBIC (J4859C)
ProCurve Gigabit-LH-LC Mini-GBIC (J4860C)
ProCurve Gigabit 1000Base-T Mini-GBIC
(J8177B)
ProCurve 620 Redundant/External Power
Supply (J8696A)
ProCurve 100-FX SFP-LC Transceiver (J9054B)
ProCurve Manager Plus 2.2 unlimited-device
license (J9059A)
ProCurve Identity Driven Manager 2.0 base
product (500-user license) (J9012A)
Services for accessories are covered under the product in which they are installed.
For more information
To learn more about ProCurve
Networking, please visit
www.procurve.eu
© 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
4AA1-5962EEE, Fall 2007