Cisco Industrial Ethernet 2000U Series Switches Data Sheet

Data Sheet
Cisco Industrial Ethernet 2000U Series Switches
Product Overview
The Cisco® Industrial Ethernet (IE) 2000U Switches are compact switches for the harsh, rugged environments
often found in the energy and utility industries. IE 2000U switches support the communications needs of the utilityand customer-owned energy-delivery infrastructure across distributed generation, transmission, and distribution
sectors. This infrastructure includes substation applications supporting electrical transmission and distribution,
renewable generation, oil and gas, water, distributed generation, cogeneration, and trackside operations.
Product Details
Cisco IE 2000U Series Switches are designed for DIN rail mounting, low port counts, and small sizes. They offer:
●
Four, eight, or 16 Fast Ethernet ports (either SFP (Small Form-Factor Pluggable) or 100BaseT RJ45
downlinks depending on the model); fixed configurations with a compact form factor
●
Two Gigabit Ethernet uplink ports (SFP, RJ45 or combo) and up to 2 additional FE uplinks depending on
model
●
IEC-62439-3: Parallel Redundancy Protocol support on 8 and 16 port models
●
Dual-input DC power supply, alarm relays, DIN rail mount
●
Swappable SD flash card required and included
●
Mini-USB and traditional serial console connector
●
Substation environmental compliance and certifications: IEC-61850-3 and IEEE 1613
●
Conformal coating available on specific models
Primary IE 2000U Features and Benefits
●
Rugged industrial design and substation compliance: IEC-61850-3 and IEEE 1613 for utility substation
environments
●
Advanced quality of service (QoS) capabilities to support mission-critical substation applications such as
Supervisory Control and Data Acquisition (SCADA) and IEC 61850 Generic Object Oriented Substation
Events (GOOSE) messaging
●
Tools for easy deployment, management, and replacement
●
Extensive instrumentation and remote diagnostic capabilities
●
Comprehensive network security features based on open standards, such as 802.1x, Dynamic Address
Resolution Protocol (ARP) Inspection, and Port Security
The IE 2000U is designed for network security, high availability, ease of use, and durability. Table 1 lists the
business benefits of the IE 2000U.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 10
Table 1.
IE 2000U Primary Business Benefits
Benefit(s)
Description
Rugged Design for
Substation Compliance
and Durability
● Compliant with IEEE 1613 and IEC-61850-3 substation standards for rugged design.
● Convection cooled, with no moving parts or fans for maximum reliability and reduced network outages.
Network Security
● Advanced Cisco IOS® Software features such as 802.1x, Dynamic ARP Inspection, DHCP Snooping.
● Layer 2 - Layer 4 access control lists (ACLs), port security, protected port/private VLAN, user network
interfaces/enhanced network interfaces (UNI/ENI) in default shutdown mode and configuration file security to
prevent unauthorized network access and reduce operational costs of securing the network.
High Availability and
Redundancy
● Advanced Cisco IOS Software features such as Resilient Ethernet Protocol (REP) and FlexLink provide fast
reconvergence in ring and hub-and-spoke topologies, reducing network downtime and associated costs.
● Supports Parallel Redundancy Protocol (PRP) on 8 and 16 port models.
● Field-replaceable components such as power supplies and SFPs reduce redeployment time.
● Redundant DC power inputs.
Ease of Use
● Intuitive graphical user interface (GUI) in Cisco Configuration Professional simplifies configuration of switches and
reduces training time and costs. Utility-focused enhancements have been added to further increase ease of use.
● SmartPort templates provide one-touch global and port-level macros to simplify switch deployments.
Investment Protection
● Two Cisco IOS Software images are available so you can match the right feature set to your networking needs.
● An advanced Layer 2 switching feature set comes standard with the IE 2000U.
● An IP Services feature set with advanced Layer 3 functionality is available.
● Ongoing development of software capabilities leads to a longer product lifecycle, lowering the total cost of
ownership.
Energy Efficiency
The IE 2000U architecture provides energy-saving features:
● High-efficiency power supplies with dual connections for redundancy and high availability.
● No fans are used, which reduces overall power consumption.
Software Optimized for Energy Applications
The IE 2000U software is optimized for energy applications and builds on the strength of Cisco IOS Software,
which powers mission-critical networks across the world. Numerous new features make the IE 2000U the optimal
Ethernet switch for energy network operators. For example, Cisco SmartPort templates can enable simple
configuration for utility environments. Features such as Generic Online Diagnostics (GOLD) publish an event when
critical failures are detected, and this can be retrieved from the switch. Also, onboard failure logging (OBFL)
collects and logs information from critical sensors in the switch, monitoring voltage, temperature, and other
information.
In addition, many default behaviors of the IE 2000U are different from those of traditional Ethernet switches,
making the IE 2000U easier to configure, manage, secure, and troubleshoot.
High Availability and Redundancy
High availability is a vital requirement for networks that transport mission-critical data. The IE 2000U supports dual
connections for power supplies, SFP modules, and the connected grid swap drive, which increases network uptime
and reduces redeployment time in the field. In addition, external alarm inputs/outputs allow network operators to
monitor changes in the switch's environmental conditions before a failure occurs.
To further increase high availability on a network-wide level, the IE 2000U offers PRP, REP and FlexLink for fast
reconvergence, link-state tracking, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP), and per-VLAN Rapid
Spanning Tree Plus (PVRST+). These capabilities help to create redundant, failsafe topologies. Strong, built-in
security helps prevent the device and the network from succumbing to malicious attacks, thereby enhancing
network uptime.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 10
Security
The wide range of security features on the IE 2000U protects mission-critical traffic, prevents unauthorized access,
and maintains uninterrupted operation. The IE 2000U protects operational and nonoperational data by focusing on
securing connectivity, defending against network threats, and providing trust and identity features.
Protecting a network begins with securing connectivity. For example, ACLs can be used to restrict access to
sensitive portions of the network. To defend against network threats such as Dynamic Host Configuration Protocol
(DHCP) spoofing, DHCP snooping can be used to allow only DHCP requests (but not responses) from untrusted
user-facing ports. Workforce management is a critical use case, where trust and identity features such as IEEE
802.1x can be used to facilitate strong security policies, yet provide maximum mobility to a remote workforce.
Table 2 lists these and other primary features of the security solution.
Table 2.
Primary Features for Each Area of Comprehensive Security Solution
Secure Connectivity
Threat Defense
Trust and Identity
UNI/ENI default: control traffic shut down
Configurable control plane security
ACLs
DHCP snooping and IP source guard
Storm control
IEEE 802.1x
Dynamic Address Resolution Protocol
(ARP) inspection
Port security
UNI/ENI default: port down
Private VLAN
Configurable per-VLAN MAC learning
Configuration file security
Switch Management Options
The IE 2000U offers an easy-to-use GUI for configuration through the Cisco Configuration Professional tool, as
well as a superior command-line interface (CLI) for detailed configuration. In addition, the switches support Simple
Network Management Protocol (SNMP) for network-wide management. Network operators can integrate the IE
2000U transparently into their network operations centers and promote improved flow-through provisioning.
Network operators can also manage the IE 2000U using SNMP Versions 2 and 3. A comprehensive set of MIBs is
provided for network operators to collect traffic information from the IE 2000U.
Switch Performance and Scalability
●
Maximum Forwarding Bandwidth – 3.8Gbps
●
Maximum Switching Bandwidth – 7.6Gbps
●
Maximum Forwarding rate: 5.66Mpps with 64-byte packets(Line-rate at all packet sizes)
●
Egress buffer: 2 MB
●
Unicast MAC addresses: 8000
●
Internet Group Management Protocol (IGMP) multicast groups: 1000
●
Maximum virtual LANs (VLANs): 1005
●
IPv4 MAC security Access Control Entries (ACE): 375 (default ternary content-addressable memory [TCAM]
template)
●
Switching Database Manager (SDM) templates for Layer 2 and Layer 3 deployments: optimizes memory
allocation to the desired features based on deployment-specific requirements
Switch Configurations
Figure 1 displays switch models, and Table 3 provides Cisco IE 2000U Series Switch configuration information.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 10
Figure 1.
Switch Models
Table 3.
Cisco IE 2000U Series Configurations
Product Number
Total Ports
RJ45 Ports
IE-2000U-4TS-G
6
4 FE
IE-2000U-4T-G
6
2 GE + 4 FE
IE-2000U-4S-G
6
IE-2000U-8TC-G
10
8 FE
2 GE
IE-2000U-16TC-G
20
16 FE
2 GE + 2 FE
IE-2000U-16TC-G-X
20
16 FE
IE-2000U-16TC-GP
18
16 FE
*
*
Combo Ports
SFP Ports
Software
2 GE
LAN Base
IEEE 1588
PRP
LAN Base
X
X
LAN Base
X
X
2 GE + 2 FE
LAN Base
X
X
2 GE
LAN Base
X
X
PoE(+)
LAN Base
2 GE + 4 FE
LAN Base
X
Conformal coating
Table 4.
Power Supplies
Product Number
Wattage
PWR-IE170W- PC-AC= 170W
Rated Nominal
Input Operating
Range
Supported Input
Voltage Operating
Range
Power Output
PoE/PoE+
Support
Use Case Scenario
AC 100-240V/2.3A
50-60Hz
AC 90-264V
54VDC/3.15A
Yes
or
DC 106-300V
Maximum PoE/PoE+ port
support in a AC or high
DC environment1
or
DC 125-250V/2.1A
PWR-IE170W- PC-DC= 170W
DC 12-54V/23A
DC 10.8-60V
54VDC/3.15A
Yes
Maximum PoE/PoE+ port
support in a DC
environment1
PWR-IE50W- AC=
AC 100-
AC 90-264V
24VDC/2.1A
No
240V/1.25A 50-
or
60Hz
DC 106-300V
Provides power to main
system, not used for PoE
in an AC or high DC
environment
AC 90-264V
24VDC/2.1A
No
Provides power to main
system, not used for PoE
in DC environment
AC 100-240V/1.4A
50-60Hz
AC 90-264V
54VDC/1.2 A
Yes
or
DC 106-300V
Supports up to 4 ports
PoE or 2 ports PoE+
when used in PoE power
input in an AC or high DC
environment
54VDC/1.2 A
Yes
Supports up to 4 ports
PoE or 2 ports PoE+
when used in PoE power
input in a DC
environment
50W
or
DC 125- 250V/1.25A
PWR-IE50W- AC-IEC=
50W
AC 100240V/1.25A 5060Hz
PWR-IE65W- PC-AC=
65W
or
DC 125-250V/1.0A
PWR-IE65W- PC-DC=
1
65W
DC 24- 48VDC/4.5A
DC 18-60V
The 170W (both AC and DC) power supplies have enough power for the base unit and the PoE. Connect one power output from
the 170W PSU to the main power input of the IE2000U, and the other power output of the 170W PSU to the PoE power input of
the IE2000U.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 10
IE 2000U switches are field upgradable from LAN Base to IP Services images. Table 5 shows available
accessories and IP Services License.
Table 5.
IE 2000U Accessories
Product Number
Description
MEM-SD-1GB-RGD
1 GB industrial-grade secure digital (SD) memory card
STK-RACKMNT-2955
19 in. DIN rail mount kit
SIEUISK9T-15002EK=
IP Services Software License for IE-2000U switches
Product Specifications
Table 6 lists product specifications.
Table 6.
Specifications
Description
Specification
● 256 MB DRAM with ECC memory
● 1 GB removable SD flash memory card (CG swap drive) – (128MB space available)
Hardware
● Mini-USB connector
Alarm
● Alarm I/O: two alarm inputs to detect dry contact open or closed, one alarm output relay. 48 VDC, 0.5A max
Power Supply
● Redundant DC input voltage with operating range: 12-48 VDC Nominal, 9.6-60 VDC Maximum
● Maximum DC input current: 0.5A at 48 VDC, 1A at 24 VDC
Power Consumption
● 6-port models: 9.5-15 W
● 10-port models: 11-16 W
● 20-port models: 13-20 W
Dimensions (H x W x D),
Including DIN Rail
● IE-2000U 6 ports (copper downlinks) chassis: 5.1 x 2.95 x 4.51 in (130 x 74.9 x 115 mm)
● IE-2000U 6 ports (SFP downlinks) chassis: 5.1 x 3.15 x 4.51 in (130 x 80 x 115 mm)
● IE-2000U 10 ports: 5.1 x 3.6 x 5.26 in (130 x 91.4 x 134 mm)
● IE-2000U 20 ports: 5.1 x 5.0 x 5.26 in (130 x 127 x 134 mm)
● IE-2000U 6 ports (copper downlinks) chassis: 2.45 lbs (1.11 kg)
● IE-2000U 6 ports (SFP downlinks) chassis: 2.69 lbs (1.22 kg)
Weight
● IE-2000U 10 ports long chassis: 3.45 lbs (1.56 kg)
● IE-2000U 20 ports chassis: 4.35 lbs (1.97 kg)
Table 7 lists the primary features in the LAN Base Cisco IOS Software image.
Table 7.
Primary Features for LAN Base and IP Services Cisco IOS Software Image
LAN Base
Per port per VLAN ingress policing
Resilient Ethernet Protocol
SCADA protocol classification using ACLs
FlexLink
Per GOOSE VLAN classification/statistics
Link-state tracking
Configurable egress queue bandwidth
UDLD
Configurable egress buffers/thresholds
xSTP: 802.1s/802.1w
Strict priority queuing with optional policer
EtherChannel/LACP/Port Aggregation Protocol (PAgP)
Web- and MAC-based authentication
External alarm contacts
Port security plus Cisco enhancements
Modbus memory map support
DHCP snooping, dynamic ARP inspection, IP source guard
FEFI
Spanning Tree Protocol security mechanisms
Cisco Configuration Professional
Storm control
Utility-specific Smartport macros
Wire-speed L2-L4 ACLs
DHCP autoconfig/image upgrade
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 10
LAN Base
Private VLAN
Config rollback/replace
Secure connectivity: SSH/SSL/SCP
SPAN/RSPAN
RADIUS/TACACS+
Layer 3 IP SLA
SNMPv3 crypto
GOLD
Configuration file security
OBFL
UNI/ENI and NNI port types (configurable on all ports)
Time Domain Reflectometry (copper ports)
Configurable per VLAN MAC learning
Digital Optical Monitoring (DOM), optical ports
MAC address learning and aging notifications
Ethernet OAM
Configurable control plane security
Connectivity Fault Management (CFM)
IEEE 802.1x and identity-based network services
IEEE 802.1ag Ethernet in the first mile (EFM)
IEEE 802.1AR for hardware-based security
IEEE 802.3ah Ethernet LMI (PE) -MEF
Ethernet LMI (CE): MEF
CFM to E-LMI Interworking
CFM to EFM Interworking
802.1ag plus IPSLA (Ethernet SLAs)
Parallel Redundancy Protocol(PRP)
PoE and PoE+
IP Services
Static routing, Inter-VLAN routing
HSRP
Multi-VRF CE (VRF-lite)
Multicast routing: PIM (SM, DM)
Policy-based routing
Source Specific Multicast
RIP Versions 1 and 2
Source Specific Multicast mapping
EIGRP, OSPF, and IS-IS
Bidirectional Forwarding Detection
BGPv4
Multicast support for VRF (mVRF-Lite)
IPv6 routing
VRF-aware services (ARP, ping, SNMP, HSRP, uRPF syslog, traceroute,
FTP, and TFTP)
Management and Standards
Table 8 provides management and standards support information for the IE 2000U.
Table 8.
Description
Management
Management and Standards
Specification
● BRIDGE-MIB (RFC1493)
● BGP4-MIB (RFC1657)
● CISCO-SYSLOG-MIB
● CISCO-TCP-MIB
● CISCO-CABLE-DIAG-MIB
● CISCO-BULK-FILE-MIB
● CISCO-UDLDP-MIB
● CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
● CISCO-CDP-MIB
● CISCO-CONFIG-COPY-MIB
● CISCO-VLAN-MEMBERSHIP-MIB
● ENTITY-MIB (RFC2737)
● CISCO-CONF-MAN-MIB
● CISCO-DATA-COLLECTION-MIB
● ETHERLIKE-MIB
● IEEE8021-PEA-MIB
● CISCO-ENVMON-MIB
● CISCO-ERR-DISABLE-MIB
● IEEE8023-LAG-MIB
● IF-MIB (RFC 1573)
● CISCO-ETHERNET-ACCESS-MIB
● CISCO-FLASH-MIB
● IGMP-MIB
● IPMROUTE-MIB
● CISCO-FTP-CLIENT-MIB
● CISCO-IETF-DOT3-OAM-MIB
● OLD-CISCO-CHASSIS-MIB
● OLD-CISCO-FLASH-MIB
● CISCO-IGMP-FILTER-MIB
● CISCO-IPLSA-ETHERNET-MIB
● OLD-CISCO-INTERFACES-MIB
● OLD-CISCO-IP-MIB
● CISCO-PAGP-MIB
● CISCO-PAE-MIB
● OLD-CISCO-SYS-MIB
● OLD-CISCO-TCP-MIB
● CISCO-PING-MIB
● CISCO-POE-EXTENSIONS-MIB
● OLD-CISCO-TS-MIB
● PIM-MIB
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 10
Description
Specification
● CISCO-PRIVATE-VLAN-MIB
● RFC1213-MIB (MIB-II)
● RMON-MIB (RFC 1757)
● CISCO-PROCESS-MIB
● CISCO-PORT-QOS-MIB
● RMON2-MIB (RFC 2021)
● SNMP-FRAMEWORK-MIB (RFC2571)
● CISCO-PORT-SECURITY-MIB
● CISCO-PORT-STORM-CONTROL-MIB
● SNMP-MPD-MIB (RFC 2572)
● SNMP-NOTIFICATION-MIB (RFC 2573)
● CISCO-IMAGE-MIB
● CISCO-LAG-MIB
● CISCO-L2L3-INTERFACE-CONFIG-MIB
● CISCO-MAC-NOTIFICATION-MIB
● CISCO-MEMORY-POOL-MIB
● CISCO-RTTMON-MIB
● CISCO-STACK-MIB
● CISCO-STP-EXTENSIONS-MIB
Standards and Protocols
● SNMP-TARGET-MIB (RFC 2573)
● SNMPv2-MIB (RFC 1907)
● SNMP-USM-MIB (SNMP-USER-BASED-SM-MIB) (RFC2574)
● SNMP-VACM-MIB (SNMP-VIEW-BASED-ACM-MIB)
(RFC2575)
● TCP-MIB (RFC 2012)
● UDP-MIB (RFC 2013)
● IEEE 802.1s
● IEEE 802.1w
● IEEE 802.1x
● IEEE 802.3ad
● IEEE 802.3ah
● IEEE 802.1ag
● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
● IEEE 802.1D Spanning Tree Protocol
● IEEE 802.1p CoS classification
● IEEE 802.1Q VLAN
● IEEE 802.3 10BASE-T
● IEEE 802.3u 100BASE-T
● IEEE 802.3ab 1000BASE-T
● IEEE 802.3z 1000BASE-X
● IEEE 802.3af (IE-2000U-16TC-GPE only)
● IEEE 802.3at (IE-2000U-16TC-GPE only)
● IEEE 1588v2
● IEC-62439-3 PRP
● IPv6: MLD Snooping v1 and v2
● Management: SNMP versions 1, 2, and 3
SFPs for Cisco IE 2000U Switches
Table 9 provides SFP support information.
Table 9.
SFP Support
Part Number
Specification
SFP Type
Max Distance
Cable Type
Temp Range*
DOM Support
GLC-FE-100FX-RGD=
100BASE-FX
FE
2km
MMF
IND
Yes
GLC-FE-100LX-RGD
100BASE-LX10
FE
10km
SMF
IND
Yes
GLC-FE-T-I=
100BASE-T
FE
100m
Copper
IND
NA
GLC-FE-100FX=
100BASE-FX
FE
2km
SMF
COM
No
GLC-FE-100LX=
100BASE-LX10
FE
10km
SMF
COM
No
GLC-FE-100EX=
100BASE-EX
FE
40km
SMF
COM
No
GLC-FE-100ZX=
100BASE-ZX
FE
80km
SMF
COM
No
GLC-FE-100BX-D=
100BASE-BX10
FE
10km
SMF
COM
No
GLC-FE-100BX-U=
100BASE-BX10
FE
10km
SMF
COM
Yes
GLC-SX-MM-RGD=
1000BASE-SX
GE
550m
MMF
IND
Yes
GLC-LX-SM-RGD=
1000BASE-LX/LH
GE
550m/10km
MMF/SMF
IND
Yes
GLC-ZX-SM-RGD=
1000BASE-ZX
GE
70km
SMF
IND
Yes
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 10
*
Part Number
Specification
SFP Type
Max Distance
Cable Type
Temp Range*
DOM Support
GLC-BX40-U-I=
1000BASE-BX40
GE
40km
SMF
IND
Yes
GLC-BX40-D-I=
1000BASE-BX40
GE
40km
SMF
IND
Yes
GLC-BX40-DA-I=
1000BASE-BX40
GE
40km
SMF
IND
Yes
GLC-BX80-U-I=
1000BASE-BX80
GE
80km
SMF
IND
Yes
GLC-BX80-D-I=
1000BASE-BX80
GE
80km
SMF
IND
Yes
GLC-SX-MMD=
1000BASE-SX
GE
550m
MMF
EXT
Yes
GLC-LH-SMD=
1000BASE-LX/LH
GE
550m/10km
MMF/SMF
EXT
Yes
GLC-EX-SMD=
1000BASE-EX
GE
40km
SMF
EXT
Yes
GLC-ZX-SMD=
1000BASE-ZX
GE
70km
SMF
EXT
Yes
GLC-BX-D=
1000BASE-BX10
GE
10km
SMF
COM
Yes
GLC-BX-U=
1000BASE-BX10
GE
10km
SMF
COM
Yes
CWDM-SFP-xxxx= (8 freq)
CWDM 1000BASE-X
GE
SMF
COM
Yes
DWDM-SFP-xxxx= (40 freq)
DWDM 1000BASE-X
GE
SMF
COM
Yes
SFP-GE-S=
1000BASE-SX
GE
550m
MMF
EXT
Yes
SFP-GE-L=
1000BASE-LX/LH
GE
550m/10km
MMF/SMF
EXT
Yes
SFP-GE-Z=
1000BASE-ZX
GE
70km
SMF
EXT
Yes
GLC-SX-MM=
1000BASE-SX
GE
550m
MMF
COM
No
GLC-LH-SM=
1000BASE-LX/LH
GE
550m/10km
MMF/SMF
COM
No
GLC-ZX-SM=
1000BASE-ZX
GE
70km
SMF
COM
Yes
GLC-TE=
1000BASE-T
GE
100m
Copper
EXT
NA
GLC-T=
1000BASE-T
GE
100m
Copper
COM
NA
If non industrial (i.e., EXT, COM) SFPs are used the switch operating temperature must be derated.
Note:
For DOM support and for first software release supporting SFP, refer to
http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html
Safety and Compliance
Table 10 gives safety and compliance information for the IE 2000U.
Table 10.
Safety and Compliance Specifications
Description
Specification
Substation Compliance
● IEC 61850-3
● IEEE1613
Hazardous Location
● ANSI/ISA 12.12.01 (Class 1, Div 2 A-D) (requires cabinet enclosure)
● UL/CSA 60079-0, -15 (Class 1, Zone 2, group II gases, requires cabinet enclosure)
● EN 60079-0, -15 ATEX certification (Class I, Zone 2, Group II gases, requires cabinet enclosure)
● IEC 60079-0, -15 (Class I Zone 2, Group II gases, requires cabinet enclosure)
● CSA 213
Industrial Control Safety
● UL508
● CSA C22.2 No. 142
EMC Interface Immunity
● EN 55024 (CISPR 24)
● AS/NZS CISPR 24
● KN 24
● IEC61000-4-2 (Criteria A - Class 2)
● IEC61000-4-3/ENV50204 (Criteria A)
● IEC61000-4-4 (Criteria A/Criteria B)
● IEC61000-4-5 (Criteria B)
● IEC61000-4-6 (Criteria A)
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 10
Description
Standard
Electromagnetic
Emissions Certifications
Specification
● FCC Part 15 Class A
● EN 55022 Class A (CISPR22 Class A)
● ICES-003 Class A
● EN 300 386
● VCCI Class A
● AS/NZS CISPR22 Class A
● CNS 13438 Class A
● KN 22 Class A CE Marking
Standard Safety
Certifications
● UL 60950-1
● CSA 60950-1
● EN 60950-1
● IEC 60950-1, CB report and certificate with all national differences
Operating Environment
● Operating Temperature: -40C to +75C
● -40C to +70C (Vented Enclosure – 40 LFM Air Flow)
● -40C to +60C (Sealed Enclosure – 0 LFM Air Flow)
● -34C to +75C (Fan or Blower equipped Enclosure – 200 LFM Air Flow)
● -40 to +85C (IEC 60068-2-2 Environmental Type testing - 100 hours)
● Operating altitude: -60 m (-200 ft) to 3,000 m (10,000 ft), de-rate maximum operating temperature per IEEE
1613-2009:
● Relative humidity: 5% to 95% non-condensing
Storage Environment
● Temperature: -50º C to +85º C
● Altitude: 15,100 ft (4600 m)
Warranty
● Five-year limited warranty on all IE-2000U HW PIDs and all IE Power Supplies defined in table 4 above. See link
at end of Data Sheet for details on warranty.
Mean Time Between
Failure (MTBF)
● 16 Port Models - 535,190 Hours
● 8 Port Models – 700,760 Hours
● 4 Port Models - 979,280 Hours
Protection Class Code
● IP30 per EN60529
Warranty Information
IE 2000U Series Switches come with a five-year limited hardware warranty. More information is available at
http://www.cisco-servicefinder.com/warrantyfinder.aspx.
Service and Support
Cisco offers a wide range of services programs to accelerate customer success. These innovative services
programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high
levels of customer satisfaction. Cisco Services help you protect your network investment, optimize network
operations, and prepare your network for new applications to extend network intelligence and the power of your
business. For more information about Cisco Services, refer to Cisco Technical Support Services or Cisco
Advanced Services at http://www.cisco.com/go/services.
Cisco Capital
Financing to Help You Achieve Your Objectives
Cisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive. We
can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital
financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment.
And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 10
For More Information
For more information about Cisco products, contact:
●
United States and Canada: 800 553-6387
●
Europe: 32 2 778 4242
●
Australia: 612 9935 4107
●
Other: 408 526-7209
●
Cisco Industrial Ethernet 2000U (IE 2000U) Series Switches:
http://www.cisco.com/en/US/products/ps13222/index.html.
Printed in USA
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-729056-08
07/16
Page 10 of 10
Download PDF