Owners Manual - Encompass Parts

Televisions
5000 series
65PFL5922
55PFL5922
50PFL5922
43PFL5922
Register your product and get support at
www.philips.com/welcome
EN User Manual
To obtain a more detailed Electronic
Copy of this Manual or to access live
chat support, go to
www.philips.com/support
ES Manual del Usuario
Para obtener una copia electrónica más
detallada de este Manual de usuario o
para tener acceso al soporte de chat en
vivo, vaya a www.philips.com/support
FR Manuel d’Utilisation
Pour obtenir une copie électronique
plus détaillée de ce guide ou accéder
au soutien par clavardage en direct,
visitez le www.philips.com/support
EN For further assistance, call the customer support service in
your country.
•
To obtain assistance, contact Philips Customer Care Center;
In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands
1 866 202 5960
México D.F. and Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
ES Para obtener más información, llame al servicio de
soporte al cliente de su país.
•
Para obtener asistencia, comuníquese con Centro de
atención al cliente de Philips;
En los Estados Unidos, en Canadá, Puerto Rico o en las
Islas Vírgenes de los Estados Unidos; 1 866 202 5960
México D.F. y Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
FR Pour obtenir de l’aide supplémentaire, communiquez
avec le centre de service à la clientèle de votre pays.
•
Pour obtenir de l’aide, communiquez avec le centre de
service à la clientèle Philips au;
Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles
Vierges américaines; 1 866 202 5960
México D.F. et Área Metropolitana; 58 87 97 36
Interior de la Republica; 01 800 839 19 89
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Register online today at www.philips.com/welcome today
to get the most benefits from your purchase.
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.
Register Online at www.philips.com/welcome to ensure:
*Product Safety Notification
*Additional Benefits
By Registering your Product, you'll receive
notification - directly from the manufacturer - in
the rare case of a Product Recall or Safety Defect.
Know these
Registering your Product guarantees that you'll
receive all of the Privileges to which you're
Entitled, including special money-saving offers.
safety symbols
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the apparatus’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus.
The caution marking is located on the rear or bottom of the cabinet.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
CAUTION:
ATTENTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’au fond.
For fastest support visit us online for chat and self service
solutions at www.philips.com/support
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer
electronics industry are committed to making home
entertainment safe and enjoyable.
• As you enjoy your television, please note that all
televisions – new and old- must be supported on
proper stands or installed according to the
manufacturer’s recommendations. Televisions that are
inappropriately situated on dressers, bookcases,
shelves, desks, speakers, chests, carts, etc., may fall
over, resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations
for the safe installation of your television.
• ALWAYS read and follow all instructions for proper
use of your television.
• NEVER allow children to climb on or play on the
television or the furniture on which the television is
placed.
• NEVER place the television on furniture that can
easily be used as steps, such as a chest of drawers.
• ALWAYS install the television where it cannot be
pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the
television so that they cannot be tripped over, pulled
or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
• ALWAYS contact your retailer about professional
installation if you have any doubts about your ability
to safely mount your television.
• ALWAYS use a mount that has been recommended
by the television manufacturer and has a safety
certification by an independent laboratory (such as
UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the
television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you
are mounting the television is appropriate. Some
mounts are not designed to be mounted to walls and
ceilings with steel studs or cinder block construction.
If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people
is required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE
IN YOUR HOME
• Many new television buyers move their older CRT
televisions into a secondary room after the purchase
of a flat-panel television. Special care should be
made in the placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture
that is sturdy and appropriate for its size and weight.
• NEVER place your older CRT television on a dresser
where children may be tempted to use the drawers
to climb.
• ALWAYS make sure your older CRT television does
not hang over the edge of your furniture.
2
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Important Safety Instructions
13.Unplug this apparatus during lightning storms or
when unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
1 1.Only use attachments / accessories specified by
the manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart / apparatus combination
to avoid injury from tip-over.
1.
2.
3.
4.
5.
6.
7.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
Brand
Model #
Screw dimension
65PFL5922
55PFL5922
50PFL5922
SANUS
F80b
M6 x 1.378” (35mm)
43PFL5922
SANUS
• Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall
Mount Bracket may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their
25BB
specified length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.
• Do not fasten the screws by excessive force. This may
damage the product or cause the product to fall, leading to
an injury.
• For safety reasons use 2 people to mount the TV onto a
Wall Mounting Bracket.
• Do not mount the TV onto the Wall Mounting Bracket while
your TV is plugged in or Turned On. It may result in an
electrical shock injury.
M4 x 1.378” (35mm)
• Your TV meets the VESA standard for wall mounting.
•
•
•
POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC ART 250,
PART H)
P&F USA is not liable for these types of accidents
or injuries noted below.
Wall Mount Bracket Kit
•
ANTENNA LEAD IN WIRE
Consult with your local dealer for a wall mount bracket
which is compatible with your TV model.
The recommended Wall Mount Bracket Kit (sold
separately) allows the mounting of the TV on the wall.
For detailed information on installing the wall mount, refer
to the Wall Mount Instruction Book.
P&F USA is not responsible for any damage to the product
or injury to yourself or others if you elect to install the TV
Wall Mount Bracket or mount the TV onto the Bracket on
your own.
The Wall Mount Bracket must be installed by experts.
When installing the unit on the wall, allow this
much space.
Left and right side
: 1 1.8 inches (30cm)
: 5.9 inches (15cm)
Bottom
: 3.9 inches (10cm)
Top
3
English
Example of Antenna Grounding as per NEC National Electric Code
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Modifications
1 Notice
This apparatus may generate or use radio frequency energy.
Changes or Modifications to this apparatus may cause
harmful interference.
Any Modifications to the apparatus must be Approved by
P&F USA.
The user could lose the authority to operate this apparatus
if an unauthorized Change or Modification is made.
Trademarks are the property of Koninklijke Philips N.V. or
their respective owners.
P&F USA reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the
intended use of the system. If the product or its individual
modules or procedures are used for purposes other than
those specified herein, confirmation of their validity and
suitability must be obtained. P&F USA warrants that the
material itself does not infringe any United States patents. No
further warranty is expressed or implied.
P&F USA cannot be held responsible neither for any errors
in the content of this document nor for any problems as a
result of the content in this document. Errors reported to P&F
USA will be adapted and published on the P&F USA support
website as soon as possible.
Cables
Connections to this device must be made with shielded
cables with metallic RFI / EMI connector hoods to maintain
compliance with FCC Rules and Regulations.
Canadian notice
CAN ICES-3 (B)/NMB-3 (B)
Analog and Digital Television Receiving Apparatus,
Canada BETS-7 / NTMR-7.
Pixel characteristics
The following FCC/IC RSS applies to the
Wireless LAN adapter included in this product.
This LCD product has a high number of color pixels. Although
it has effective pixels of 99.999% or more, black dots or bright
points of light (red, green or blue) may appear constantly on
the screen. This is a structural property of the display (within
common industry standards) and is not a malfunction.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Warranty
Country Code Statement
No components are user serviceable. Do not open or remove
covers to the inside of the product. Repairs may only be done
by Service Centers and official repair shops. Failure to do so
shall void any warranty, stated or implied.
Any operation expressly prohibited in this manual, any
adjustments or assembly procedures not recommended or
authorized in this manual shall void the warranty.
For product available in the USA market, only channel 1a1 1
can be operated. Selection of other channels is not possible.
To maintain compliance with FCC RF exposure requirements,
use only belt-clips, holsters or similar accessories that do not
contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not
comply with FCC RF exposure requirements and should be
avoided.
Federal Communications Commission Notice
This equipment has been tested and found to comply with
the limits for a Class B Digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one or more of the following measures:
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference and (2)
this device must accept any interference, including interference
that may cause undesired operation of the device.
5150-5250 MHz band is restricted to indoor operations only.
High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and
5650-5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that
Compliance with IC requirement RSS-210
A9.4.4
to which the receiver is connected.
Data transmission is always initiated by software, which is
the passed down through the MAC, through the digital and
analog baseband, and finally to the RF chip. Several special
packets are initiated by the MAC. These are the only ways
the digital baseband portion will turn on the RF transmitter,
which it then turns off at the end of the packet. Therefore,
the transmitter will be on only while one of the
aforementioned packets is being transmitted. In other
words, this device automatically discontinue transmission
in case of either absence of information to transmit or
operational failure.
• Consult the dealer or an experienced radio or television technician
for help.
Declaration of Conformity
: PHILIPS
: P&F USA, Inc.
: 65PFL5922, 55PFL5922, 50PFL5922,
43PFL5922
: PO Box 2248, Alpharetta, GA
Address
30023-2248 U.S.A.
Telephone Number : 1 866 202 5960
Trade Name
Responsible Party
Model
4
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Positioning the TV
Press to turn the Unit On and go into Standby mode. To
completely turn Off the Unit, you must unplug the AC power
Plug from the AC Power Outlet.
Disconnect the AC Power Plug to shut the Unit Off when
trouble is found or not in use. The AC Plug shall remain readily
available.
• Large screen TVs are heavy. 2 people are required to carry and
handle a large screen TV.
• Make sure to hold the upper and bottom
frames of the Unit firmly as illustrated.
• Install the Unit in a horizontal and stable
position.
• Do not install the Unit in direct sunlight or in
a place subject to dust or strong vibration.
• Depending on the environment, the
temperature of this Unit may increase
slightly. This is not a malfunction.
AC Power Plug
• When installing this unit in a temperate environment, avoid a place
•
•
•
•
•
•
•
Never use a gas duster on this TV.
The gas trapped inside of this Unit may cause ignition and
explosion.
Environmental Care
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to
recycle the packaging.
For product recycling information, please visit www.recycle.philips.com
Regulatory Notices
End of Life Directives
WARNING : To prevent injury, this apparatus must be securely
attached to the furniture / wall in accordance with the
instructions. Tipping, shaking or rocking the unit may
cause injury / death.
WARNING : Never place a TV in an unstable location. A TV may fall,
causing serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking simple
precautions such as:
– Using cabinets or stands recommended by the
manufacturer of the TV.
– Only using furniture that can safely support the TV.
– Ensuring the TV is not overhanging the edge of the
supporting furniture.
– Not placing the TV on tall furniture (for example,
cupboards or bookcases) without anchoring both the
furniture and the TV to a suitable support.
– Not placing the TV on cloth or other materials that
may be located between the TV and supporting
furniture.
– Educating the children about the dangers of climbing
on furniture to reach the TV or its controls.
If your existing TV is being retained and relocated, the same
considerations as above should be applied.
Philips pays a lot of attention to produce environmentalfriendly products in green focal areas. Your new TV contains
materials which can be recycled and reused. At the end of
its life, specialized companies can dismantle the discarded
TV to concentrate the reusable materials and to minimize the
amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
Batteries usage
CAUTION : Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING : Batteries (battery pack or battery installed) should not
be exposed to excessive heat such as sunshine, fire or
the like.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad,
ni-mh, Li-ion, etc.) batteries.
Disposal of Used Batteries
The batteries supplied do not contain the heavy metals
mercury and cadmium, however in certain localities,
disposing batteries with household waste is not permitted.
Please ensure you dispose of batteries according to local
regulations.
Do not place the Unit on the furniture that is capable of being
tilted by a child and an adult leaning, pulling, standing or
climbing on it. A falling Unit can cause serious injury or even
death.
In order to avoid interruption of ventilation, this unit should
not be placed in built-in equipment such as a book cabinet,
rack, etc., and the vents of this unit should not be covered
with anything such as a tablecloth, curtain, newspaper, etc.
Make sure that there is enough ventilation space (4 inches /
10 cm or more) around this unit.
5
English
•
with rapid temperature changes.
This unit should not be used in a tropical environment as it has not
been evaluated under such conditions.
No objects should be placed directly on or under this unit, especially
lighted candles or other flaming objects.
Depending on your external devices, noise or disturbance of the
picture and / or sound may be generated if the Unit is placed too
close to them. In this case, please ensure enough space between
the external devices and the Unit.
Do not insert the AC power cord into the power socket outlet before
all the connections are made.
Ensure that you always have easy access to the AC Power Cord and
Outlet to disconnect the TV from the AC Outlet.
Before you move the TV, disconnect attached Cables to prevent
damage to Connectors, especially the TV Tuner.
Be sure to Unplug the AC Power Plug from the AC outlet before
moving or carrying the Unit.
When moving the TV and then Setting it down, please be careful not
to pinch the AC Power Cord under the Unit.
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Portions of this software are copyright © The FreeType
Project (www.freetype.org).
Downloading an Electronic Copy
To obtain a more detailed electronic copy of this manual:
1 Point your browser to : www.philips.com/support
2 Choose your country of location with language.
3 Enter the product name or number in the search field.
Alternatively, you can browse the catalog.
4 Click the Description or Model.
5 Under Product support, click “User manual”.
The American Academy of Pediatrics discourages
television viewing for children younger than two years of
age.
Some features may require an always-on broadband
internet connection, firmware update and/or a minimum
bandwidth. Internet services vary by location.
P&F USA Inc./P&F MEXICANA, S.A.de C.V. do not warrant
access to the Portal or to any of the services, content,
software and advertising. P&F USA Inc./P&F MEXICANA,
S.A. de C.V. may, in its sole discretion, add or remove access
to any specific services, content, software and advertising
at any time. Although P&F USA Inc./P&F MEXICANA, S.A.
de C.V. will strive to provide a good selection of services,
content or software, P&F USA Inc./P&F MEXICANA, S.A. de
C.V. do not warrant continued access to any specific
services, and content or software.
Preparing to Move/Ship the Unit
Please pack the Unit properly by following the Diagram on
the Carton (as noted below).
• To avoid damage to the Screen, do not pack the Stand on the same
side as the TV screen, refer to the illustration above.
Copyright
All other registered and unregistered trademarks are the
property of their respective owners.
The terms HDMI and HDMI HighDefinition Multimedia Interface,
and the HDMI Logo are
trademarks or registered
trademarks of HDMI Licensing
LLC in the United States and
other countries.
Dolby, Dolby Audio, and the
double-D symbol are
trademarks of Dolby
Laboratories.
Sonic Emotion and the Sonic
Emotion logo symbol are
registered trademarks of sonic
emotion ag.
6
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Contents
2 Getting Started
1 Notice ............................................................ 4
Connecting Antenna or Cable /
Satellite / IPTV Set-top Box
2 Getting Started ....................................... 7
Be sure your Antenna or another Device is connected
properly before plugging in the AC Power Cord.
Connecting Antenna or Cable / Satellite /
IPTV Set-top Box
If connecting to an Antenna through an RF cable
7
Any DTV Programs that are Broadcast in your area can
be received for free through an Antenna Connection.
3 Use your TV .............................................. 8
Cable
8
8
8
10
10
11
11
12
12
13
13
IN
Antenna
OUT
RF cable
If connecting a Set-top Box through an HDMI cable
If the TV is connected to a Cable / Satellite Set-top Box
via an HDMI cable, make sure you select the correct
Source by using SOURCE.
IN
HDMI cable
RF cable
OUT
14
IN
Set-top Box
4 Install Channels ................................... 14
Reinstall Channels
14
Note(s)
• If there are issues with picture/color and/or sound when
connecting an external device using the HDMI port, please try
switching the HDMI mode. (Refer to HDMI mode p. )
• It is recommended to use an HDMI-certified High-Speed HDMI®
cable. If you do not use an HDMI-certified cable, you might have
display issues as a result of connection errors.
5 Troubleshooting Tips ....................... 15
6 Specifications ....................................... 16
Connecting a Cable / Satellite / IPTV Settop Box, Blu-ray Disc / DVD Recorder via
Composite Connectors and Analog Audio
7 Warranty .................................................. 17
Do Not place your Recorder too close to the Screen
because some Recorders can be susceptible to harmful
interference from the TV.
License ............................................................... end of book
Satellite
Cable
OUT
RF cable
RF cable
IN
IN
Video + Audio(L/R)
cables
IN
Cable
IN
Set-top Box
OUT
Video +
Audio(L/R)
cables
OUT
OUT
IN
Blu-ray Disc / DVD Recorder
Note(s)
• If there is No Input Signal and No Operation for 15 minutes, the
Unit will go into Standby mode Automatically.
7
English
Watching Channels from an External Device
Displaying Setup using MENU
Changing Picture and Sound Settings
Changing Cast TV Settings
Changing Picture Format
Caption Settings
Child and Ratings Lock
Channel Lock
Setting your Location to Home
Voice guide
HDMI mode
Viewing Photos, Playing Music and
Watching Videos on a USB Memory Stick
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
3 Use your TV
Guide to the Main menu screen
Watching Channels from an
External Device
1 Turn On the Set-top Box or the Connected Device.
• The picture from the Set-top Box or the Connected
Device might appear Automatically on the TV screen.
If the picture does not appear
a
b
c
Picture and
sound setup
Search for
channels
Update
software
TV
settings
Channel
settings
Software
settings
To quickly set basic picture and sound settings, press OK
d
e
f
Picture and sound setup
Guides you to get the best picture and sound
settings.
2 Press SOURCE and use to Select the Set-
Search for channels
3
Update software
Guides you through channel installation.
top Box or the Connected Device, then press OK.
Use the Remote Control for the Set-top Box or the
Connected Device to Select Channels to view.
Guides you through an update of the TV Software.
TV settings
Accesses menus that allow you to change picture,
sound and TV usage settings.
Displaying Setup using MENU
Channel settings
Accesses menus that allow you to change
channel settings.
Software settings
Accesses menus that allow you to change
Software settings.
1
• Please read the detailed version of this user manual on
Press MENU to display the Main menus.
www.philips.com/support for more information on menu
features.
Changing Picture and Sound Settings
Picture and
sound setup
Search for
channels
Update
software
TV
settings
Channel
settings
Software
settings
You must set Home in Location. p. Otherwise, personalized Picture and Sound settings
will not be memorized after the Unit goes into Standby
Mode.
To quickly set basic picture and sound settings, press OK
Changing Picture Settings
2 Use to Select TV settings, then press OK.
1
• TV settings screen will appear.
Picture
Sound
Cast TV settings
Features
Installation
Accessibility
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Pixel Plus Ultra HD
Advanced settings
Picture format
Mode selection
Horizontal position
2
Press MENU and use to Select TV
settings, then press OK.
Use to Select Picture, then press OK.
Picture
Sound
Cast TV settings
Features
Installation
Accessibility
Note(s)
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Pixel Plus Ultra HD
Advanced settings
Picture format
Mode selection
Horizontal position
3 Use to Select the item you want to adjust, then
• If you press MENU in Chromecast built-in TV mode,
opening screen is not the Main menus, but the TV settings.
press OK.
8
Continued on next page.
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Auto picture
to Select the desired Setting, then press OK
(Personal, Standard, Natural, Vivid, Sports,
Movie, Game, Energy saving and Internet video)
Cursor to Reduce Power
Consumption and
Brightness
to Increase Power
Consumption and
Brightness
Contrast
to Decrease Contrast
to Increase Contrast
Color
Tint
Sharpness
1
Cursor Backlight
Brightness
Changing Sound Settings
2
Picture
Sound
Cast TV settings
Features
Installation
Accessibility
to Decrease Brightness to Increase Brightness
to Decrease Color
Intensity
to Increase Color
Intensity
to Add Green
to Add Red
to Soften
to Sharpen
Press MENU and use to Select TV
settings, then press OK.
Use to Select Sound, then press OK.
Enters sub-menus to adjust the following settings:
(Dynamic contrast, Color enhancement, Black
Pixel Plus Ultra HD stretch, Perfect Motion Rate, 4K UHD Upscaling,
Macro Dimming, Noise reduction and MPEG
artifact reduction)
3 Use to Select the item you want to adjust, then
press OK.
Enters sub-menus to adjust the following settings:
(Color alignment, Custom color management,
Advanced settings
HDR mode, Gamma, Blue stretch and Film
mode)
• The following sound settings can be configured.
Depending on the sound source, some sound settings
are not available.
Automatic
Auto sound
to Select the desired Setting, then press OK
(Personal, Standard, Vivid, Sports, Movie,
Music and News)
Equalizer
to Select the specific Frequency using ,
and use to Adjust the Level, then press
OK
Balance
Adjusts the balance of the Right and Left
speakers to Best suit your listening position.
4:3
Movie expand 14:9
Movie expand 16:9
Changing Picture
Format p. Wide screen
Full
Unscaled
PC
Mode selection
HDTV
Cursor Horizontal position to move PC screen left
Vertical position
to move PC screen
down
Sonic
Emotion
to Turn Off image
enhancement features
which makes the TV to
act purely as a monitor
Dialog
Sonic
Enhancement
Emotion
Premium
Bass
Enhancement
to enable image
enhancement features
to improve picture
quality
Cursor Absolute
3D Sound
to move PC screen right
to move PC screen up
Off
to set Sonic Emotion to Off
On
to set Sonic Emotion to On
Off
to set Dialog Enhancement to
Off
On
to set Dialog Enhancement to
On
Off
to set Bass Enhancement to Off
On
to set Bass Enhancement to On
Off
to set Absolute 3D Sound to Off
On
to set Absolute 3D Sound to On
Off
to Remove the Auto volume
leveling
On
to Reduce Volume Differences
between the TV Commercials
and the Programs
Off
No Output Sound from the
Unit’s Speakers
On
to Output Sound from the Unit’s
Speakers
Auto volume leveling
TV speakers
to control Audio Output from
Speakers
your connected HDMI Link
EasyLink
devices
Headphone volume Adjusts headphone volume.
PCM
Digital output format
Delta volume
9
to Output PCM format
to Output Audio in its native
Bitstream format as Bitstream to
connected Audio receiver
Provides the ability to set a custom volume
level for the current channel or input source.
If the source volume is too loud, set a
negative value (-1 to -12)
If the source volume is too soft, set a positive
value (+1 to +12)
Continued on next page.
English
Super zoom
Picture format
Auto sound
Equalizer
Balance
Sonic Emotion Premium
Auto volume leveling
TV speakers
Headphone volume
Digital output format
Delta volume
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Changing Cast TV Settings
Unscaled
Displays Cast TV Settings. If you set Wake on Cast
(LAN) to On, you can turn your TV on when you use
your smartphone, tablet or PC via your home network.
1
2
Full
Press MENU and use to Select TV
settings, then press OK.
Use to Select Cast TV settings, then press
OK.
Picture
Sound
Cast TV settings
Features
Installation
Accessibility
Displays a 16:9 picture at its original size.
Displays a scaled 16:9 picture. Bars appear
on both the Upper and Lower portions of
the screen depending on the type of video
signal.
For 4:3 Video signal
Wake on Cast (LAN)
Automatic
Super zoom
4:3
Wide screen
Movie expand 16:9
Movie expand 14:9
Automatic
3 Use to Select Wake on Cast (LAN), then press
OK.
4 Use to Select On or Off, then press OK.
Wake on Cast
(LAN)
Off
to set Wake on Cast
(LAN) to Off
On
to set Wake on Cast
(LAN) to On
Super zoom
Displays a 4:3 picture at a 16:9 size; the picture
is stretched horizontally and vertically and its
left and right edges are enlarged. This crops
out some of the top and bottom of the
picture.
4:3
Displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
Movie
expand 14:9
Displays a 4:3 picture at a 14:9 size; the picture
is stretched horizontally and vertically.
This crops out some of the top and bottom of
the picture. Sidebars appear on both edges of
the screen.
Movie
expand 16:9
Displays a 4:3 picture at a 16:9 size; the picture
is stretched horizontally and vertically. This
crops out some of the top and bottom of the
picture.
Wide screen
Displays a picture that is stretched out of
proportion to fill the screen.
Changing Picture Format
Display Modes can be Selected when your TV receives
a 16:9 or 4:3 Video Signal.
Three types of Display Modes can be Selected for a PC Input
Signal.
Press FORMAT Repeatedly to Switch the TV Aspect Ratio.
Other than DTV and HDMI connected
devices, enlarges the picture to Best fit the
screen.
DTV and HDMI connected devices display
the picture at its original size. The subtitles
may remain visible.
For 16:9 Video signal (2160p)
For PC Input signal
Unscaled
Full
For 16:9 Video signal (not 2160p)
4:3
Wide screen
Unscaled
• This unit can also be connected to your PC that has a DVI
Automatic
4:3
Full
Wide screen
Terminal.
Use an HDMI-DVI Conversion Cable for this Video
Connection and it requires Stereo Mini 3.5mm Plug Audio
Cable for Analog Audio signal as well.
• Refer to 16:9 Video Signal on this page if the PC has HDMI
Output.
4:3
Automatic
4:3
Wide screen
Other than DTV and HDMI connected
devices, enlarges the picture to Best fit the
screen. DTV and HDMI connected devices
display the picture at its original size.
The subtitles may remain visible.
Wide screen
Unscaled
Displays a proportionately stretched picture.
Sidebars appear on both edges of the screen.
Displays a picture that is stretched out of
proportion to fill the screen.
Displays a picture in its original size.
If the signal source has side or top-bottom bars
inserted into the picture, the Picture Format function
will not eliminate them.
Displays a 16:9 picture at a 4:3 size; the
picture is shortened horizontally. Sidebars
appear on both edges of the screen.
Displays a 16:9 picture that is stretched
horizontally and vertically.
10
Continued on next page.
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Caption Settings
Note(s)
Closed Captions displays the Audio portion of the
Program as Superimposed Text over the Video.
• Closed Captions Service may not be controlled by this Unit’s
1
2
3
Menu options if you are watching television through a Set-top
Box. In which case you will need to use the Menu options on
the External Set-top Box to control Closed Captions.
• The Captions do not always use correct Spelling and
Grammar.
Not all TV Programs and product Commercials include
Closed Captions information. Refer to your area TV
Program Listings for the TV Channels and times of Closed
Captions shows. The Closed Captions Programs are usually
noted in the TV Listings with a Service Mark such as CC.
• Not all Closed Captions Services are used by a TV
Broadcaster during the Transmission of a Closed Caption
Program.
• The EUT (Equipment Under Test) setting that satisfies
§ 79.102 (e) is as follows:
– Font: Mono-font
– Character Size: Large
Press MENU and use to Select TV
settings, then press OK.
Use to Select Accessibility, then press OK.
Use to Select Caption settings, then press
OK.
Closed Captions
You can choose the Closed Caption display.
4 Use to Select Closed captions, then press
OK.
5 Use to Select On, Off or CC w/ mute, then
press OK.
Cable / NTSC (Analog) TV Operation
Child and Ratings Lock
Caption service
4 Use to Select Caption service, then press OK.
5 Use to Select the desired Caption service, then
You can prevent your children from watching certain
Programs or certain Channels by locking the TV
Controls and by using Ratings.
1
The primary Closed Captions and Text Services.
The Closed Captions or Text is Displayed in the
same Language as the Program’s Dialog (up to 4
lines of script on the TV Screen).
as the preferred Data Channels. The
CC-3 and Serve
Closed Captions or Text is often a Secondary
T-3
Language.
Rarely available and Broadcasters use them only
in Special conditions, such as when CC-1 and
CC-3 or T-1 and T-3 are Not available.
• There are 3 Display modes according to
Programs:
Characters on the TV
CC-2,
Paint-on Displays
screen immediately.
CC-4, T-2
and T-4
Once Characters are Stored in
Pop-on Memory, they are Displayed All at
Once.
Displays the Characters
Roll-up Continuously by Scrolling (max. 4
lines).
CC-1 and
T-1
2
3
• When you have not set up your PIN code, enter 0, 0, 0, 0.
• When the PIN code is correct, Child lock menu is
displayed.
Setting TV and Movie Ratings
TV Ratings Lock has Controlled Access to Individual
Programs based on their Age and Content rating.
Movie Ratings Lock is the Rating System created by
MPAA.
4 Use to Select TV ratings lock or Movie ratings
lock, then press OK.
5 Use to Select the Desired Rating, then press
OK Repeatedly to Switch between Block and View.
• For US TV Ratings, you can further set the Sub Ratings to
Block Specific Elements within Programs.
Digital TV Operation
• or indicates that the Rating is Locked (Blocked).
• indicates that the Rating is Not Locked (Viewable).
Digital Caption service
4 Use to Select Digital caption service, then
5
Movie
ratings
press OK.
Use to Select the desired Digital caption
service, then press OK.
CS-1 to
CS-6
Press MENU and use to Select Channel
settings, then press OK.
Use to Select Child lock, then press OK.
Use the NUMBER buttons to enter the 4-digit
numbers for your PIN code.
TV ratings
All
Select one of these before changing any other
item in Caption settings menu. Choose CS-1
under normal conditions.
Digital caption options
You can choose the Size, Font, Color, Background and
other characteristics for the Captioned Text.
4 Use to Select Digital caption options, then
NR
–
None
TV-Y
–
TV-Y7
G
PG
PG-13
–
TV-G
TV-PG
–
TV-14
R
–
NC-17
X
–
TV-MA
press OK.
5 Use to Select an item and press OK, then use
to Select the desired Setting and press OK.
11
Description
All Ratings Locked including No
Rating
No Rating
Appropriate for All Children
Appropriate for All Children 7 and
Older
General Audience
Parental Guidance Suggested
Unsuitable for children under 13
Unsuitable for children under 14
Restricted under 17 Requires
Accompanying Parent or Adult
Guardian
No One under 17 Admitted
Mature Audience Only
Continued on next page.
English
press OK.
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Canadian English or Canadian French Ratings
Setting your Location to Home
You can select the Rating for Canadian English or
Canadian French broadcasting.
You can set the Location on your TV to Home or
Retail. Choosing Home gives you full flexibility to
change predefined settings for Picture and Sound.
4 Use to Select Canadian English rating or
Canadian French rating, then press OK.
1
5 Use to Select the Desired Rating, then press
OK Repeatedly to Switch between Block and View.
2
• indicates that the Rating is Locked (Blocked).
• indicates that the Rating is Not Locked (Viewable).
Canadian
English
rating
Canadian
French
rating
All
E
–
–
C
C8+
G
–
PG
–
14+
–
18+
8 ans+
–
13 ans+
–
16 ans+
18 ans+
Press MENU and use to Select TV
settings, then press OK.
Use to Select Installation, then press OK.
Picture
Sound
Cast TV settings
Features
Installation
Accessibility
Description
Locked All Ratings
Exempt Program
For All Children
For All Children 8 and Older
General Audience
Unsuitable for Ages under 8
Parental Guidance Suggested
Unsuitable for Ages under 13
Unsuitable for Ages under 14
Unsuitable for Ages under 16
Adult Audience Only
Language
Preferences
Restore default settings
3 Use to Select Preferences, then press OK.
4 Use to Select Location, then press OK.
5 Use to Select Home, then press OK.
Note(s)
• You must set Home in the Menu. Otherwise, personalized
Picture and Sound Settings will Not Be Memorized after the
Unit goes into Standby Mode.
Note(s)
• The V-Chip can Block Non Rated Programs as per
“CEA-608-E sec. L.3”. If the Option to Block NR, None or E
Programs are used in Movie ratings lock, TV ratings lock,
Canadian English rating or Canadian French rating
accordingly “unusual results may occur and the Unit may
not Receive Emergency Bulletins or other Types of
Programming”: / Emergency Bulletins (Such as EAS
messages, Weather Warnings and Others) / Locally
originated Programming / News / Political / Public Service
Announcements / Religious / Sports / Weather.
Channel Lock
Set it to Restrict Access on Particular Channels.
1 Press OK while viewing a TV program.
• Channel list will be displayed.
2 Use to Select a Channel, then press red
key.
3 Use the NUMBER buttons to enter the 4-digit
Numbers for your Child Lock Code.
• The Channel will be marked with Icon.
• To Unlock Channels, select a Channel to Unlock at step
2.
Set it to Restrict Access on External inputs.
1 Press SOURCE and use to Select an Input.
2 Press OPTIONS and use to Select Lock or
Unlock, then press OK.
3 Use the NUMBER buttons to enter the 4-digit
Numbers for your Child Lock Code.
12
Continued on next page.
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Voice guide
HDMI mode
Lets you configure voice guide and its settings.
If there are issues with picture/color and/or sound
when connecting an external device using the HDMI
port, please try switching the HDMI mode following the
instructions below.
1
2
3
Press MENU and use to Select TV
settings, then press OK.
Use to Select Accessibility, then press OK.
Use to Select Voice guide, then press OK.
Voice guide
toggle
Off
to set Voice guide off
On
to set Voice guide on
Speed
Normal
1
2
3
4
5
Fast
Set voice guide speed based
on your preference
Slow
6
High
Pitch
Normal
Set voice guide pitch based
on your preference
Low
Verbose
Verbosity
Succinct
• When switching the HDMI configuration, the screen will
Set voice guide explanation
verbosity based on your
preference
black out for a moment, then come back on.
Note(s)
Loud
Normal
• The HDMI connector with HDMI mode set to Max
Set voice guide volume
based on your preference
4K@30Hz (Compatibility) supports up to UHD 30P, while
The HDMI connector with HDMI mode set to Max
4K@60Hz supports up to UHD 60P. The HDMI connector
with HDMI mode set to Max 4K@60Hz + HDR supports up
to UHD 60P with HDR signal.
• Switching the HDMI mode may cause loss of HDMI CEC
functionality in certain cases.
Soft
13
Continued on next page.
English
Volume level
Press MENU and use to Select TV
settings, then press OK.
Use to Select Installation, then press OK.
Use to Select Preferences, then press OK.
Use to Select HDMI mode, then press OK.
Use to Select HDMI1, HDMI2 or HDMI3, then
press OK.
Use to Select Max 4K@60Hz + HDR, Max
4K@60Hz or Max 4K@30Hz (Compatibility)
depending on the output capabilities of the
external device, then press OK.
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
Note(s)
Viewing Photos, Playing Music and
Watching Videos on a USB Memory
Stick
• This unit accepts USB Memory Stick only. Other storage
devices such as external HDD by USB Bus Power will not
work.
• Do not use an Extension Cord and/or USB Hub to connect
Your TV is fitted with a USB connection that enables
you to view Photos, listen to Music or watch Video files
stored on a USB Memory Stick.
1
2
•
Press SOURCE and use to Select USB, then
press OK.
Use to Select the desired File, then press
OK.
•
•
•
•
Photo
USB DISK
Photo
2016_12_24
folder_A
folder_B
•
folder_C
•
•
•
•
• These Recorded Files must meet Specifications shown
below:
•
Picture (JPEG / Progressive JPEG)
JPEG
Upper limit
4000x4000 pixels
Progressive JPEG
Upper limit
1024x768 pixels
•
•
devices to this Unit. Always Directly insert the USB Flash
Memory Stick to this Unit directly.
We cannot be held responsible if your USB Memory Stick
is Not Supported, nor will we accept any liability for
damage or loss of stored data.
The USB Memory Stick is Not Supplied with this TV.
A maximum of 1,023 folders or files can be recognized.
A File Name exceeding 256 characters or contains a Dot
character is Not Supported on this TV.
A USB Memory Stick that required its own driver or the
device with a special system such as fingerprint recognition
are not supported.
Be sure to keep a Backup Copy of the Original files on your
USB device before you Play them back on this Unit. We
have no responsibilities for damage or loss of your USB
Stored Data.
To avoid damaging the USB Memory Stick and the Unit
always Turn Off the Unit before you remove the USB
Memory Stick.
This Unit is not allowed to use the USB Memory Stick which
requires external power supply (500 mA or more).
This Unit does not support MTP (Media Transfer Protocol)
or the file other than FAT16 and FAT32 file system. If the file
is not supported, an error message appears.
When the Unit does not recognize the USB Memory Stick,
try reconnecting it.
Playing the files recorded with high bit rates, the images
can be interrupted in some occasions.
This Unit does not support external subtitles.
This Unit cannot play back a file which goes over the limit
of File Restriction Limit.
Music (MP3 / WAV / AAC)
MP3
WAV
AAC
Sampling frequency
Constant bit rate
Sampling frequency
Constant bit rate
Sampling frequency
4 Install Channels
16 kHz - 48 kHz
8 kbps - 320 kbps
8 kHz - 48 kHz
Reinstall Channels
64 kbps - 1.5 Mbps
Be sure the RF cable is correctly connected to this Unit
and you are registered with your Cable TV provider
when you Install Cable channels.
8 kHz - 48 kHz
-
Constant bit rate
1
Video (MPEG / VOB / AVI / MP4)
Maximum
Video
Extension
H.264, H.265/HEVC: 3840x2160@30fps,
MPEG: 1920x1080@60fps
.avi
.mpg,
.mpeg
.ts,
.trp,
.tp
.vob
.mp4
2
3
.mkv
4
• Channel search will start automatically.
MPEG1, MPEG1,
MPEG1,
MPEG2, MPEG2,
Video codec MPEG1, MPEG1, MPEG2,
MPEG2,
MPEG1, MPEG4, MPEG4,
MPEG2, H.264,
MPEG4,
MPEG2 H.264, H.264,
MPEG4 H.265/
Audio codec
H.264
H.265/ H.265/
HEVC
HEVC
HEVC
Dolby Digital
YES
YES
YES
YES
YES
Press MENU and use to Select Search for
channels, then press OK.
Use to Select Start, then press OK.
Use to Select Antenna or Cable, then press
OK.
Select Start, then press OK.
Channel settings
System searching. Please
wait...
YES
MPEG1/2
audio
layer1/2/3
YES
YES
YES
YES
NO
YES
LPCM
YES
YES
YES
YES
YES
YES
AAC-LC
YES
YES
YES
YES
YES
YES
Auto programming may
take more than 20 minutes
to complete.
12
Digital channels found:
0
Analog channels found:
0
Total progress:
Stop
5 Press OK on Finish to complete.
14
34
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
5 Troubleshooting Tips
If the Unit does Not Perform Properly when Operated as Instructed in this Manual,
Please check the following Troubleshooting Tips and All Connections Once before calling for Service.
Power
No Power
Make sure that the AC outlet supplies the proper voltage, plug
another electrical appliance into the AC outlet to ensure that
the AC outlet operates normally.
If a Power Failure occurs, Unplug the AC Power Cord for 1
minute to allow the Unit to Reset Itself.
Remote
Remote Control Buttons or Remote itself does Not Work.
Re-insert or replace the AAA Batteries with their Polarities (+/–)
as indicated on the Remote Control Battery area.
When there is an Infrared-equipped device near this Unit, it
may interrupt the Remote Control Signal from this Unit.
Make sure that Nothing is Blocking the Unit's Remote Control
Sensor and the Remote Control is Pointed at this Remote
Control Sensor.
Press and Hold any Key on Remote Control toward a Digital or Cell
Phone Camera. The Remote Control is working if you confirm a
Flashing Infrared Light through the Camera. Some Dual Camera
Cell Phones may have an IR Filter in one or both of the Cell Phone
Cameras.
Universal Remote Control does not work properly.
Refer to the User Manual of the Universal Remote Control for
the Philips code.
Picture
Power is On but No Screen Image.
Check whether the Connection for the Antenna, Cable or Settop Box is Connected Correctly.
Check whether All the Cables to the Unit are connected to the correct
Output Jack on your separate Device like Blu-ray Disc / DVD Recorder.
Check if your computer is NOT in Sleep Mode when the Input
Mode on this Unit is in PC mode. Tap any Key on the Computer
Keyboard to Wake it up.
Check if the correct Input Mode is selected by pressing
SOURCE.
No Color
Adjust Color in Picture settings. p. Picture Poor, Sound OK
Electrical Interference from nearby appliances may affect
Picture Quality.
Adjust Contrast and Brightness in Picture Settings. p. For the Best Picture Quality, watch “High Definition” wide
screen Programs. If the HD content is Not available, watch
“Standard Definition” Programs instead.
You see Noise or Trash on the Screen.
When the capabilities on the Unit exceed the capabilities of the
Digital Broadcasting, the signal will be increased to match the
capabilities of the Display on the Unit. This may cause Noise or
Trash.
Unusual picture appears and the TV does Not Operate.
Press the Power button first. If it does not solve, follow the
procedure below.
Press the buttons on the Remote Control in the order shown below.
Unplug the AC Power Cord, then wait for 1 minute, and then
plug it in again.
Adjusted Picture or Sound settings are not effective every time
the Unit is turned On.
p. (Otherwise, the
Settings you adjusted will not be memorized after the Unit goes
into Standby Mode.)
You see a Distorted Picture or Hear an Unusual Sound.
You may be getting NTSC (Analog) TV signal (not HDTV signal)
interference from electrical appliances, automobiles,
motorcycles or fluorescent lights.
Try moving the Unit to another Location to see if this is the
Cause of the Problem.
Sound
No Sound, Distorted Sound or Incorrect Audio Sound is heard
when using the HDMI-DVI connections.
Make sure that the Analog Audio signals from the HDMI-DVI
device are connected to the Analog Audio Input L/R jacks.
Sound Poor, Picture OK
Check if the Audio Cable is connected into the Unit correctly.
You Switch to a Different Input and the Volume Changes.
This Unit will Memorize the Volume Level from the last time you
adjusted it.
If the Volume of the Sound from another Device is Higher or
Lower, then the Loudness will Change.
Child and Rating Lock
Forgotten PIN code.
Enter “07 1 1” to clear your password.
•
• You must set to Home in Location.
•
•
•
•
•
•
•
•
•
•
•
•
Screen
You Switch to a different Input and the Screen Size changes.
This Unit will Memorize the Viewing Mode from the last time
you used those Particular Input Modes.
The Display image does not cover the Entire Screen.
If you are using the unit as a PC monitor, make sure that
Horizontal position and Vertical position in PC settings are set
correctly.
If you are watching TV or using the Composite Video,
Component Video or HDMI with 480i Input, press FORMAT
Repeatedly to Switch to various Screen Modes.
Closed Captions
Closed Captions are displayed as a white box. No Closed Captions
are displayed in the Closed Captions-Supported Program.
Interference from buildings or weather conditions may cause
Closed Captions to be incomplete if watching Analog TV
signals.
Broadcasting Station may shorten the program to insert
advertisements.
The Closed Captions Decoder cannot read the information of
a shortened program.
Closed Captions that are delayed a few seconds behind the actual
dialog are common for Live broadcasts. Most captioning
production companies can display a dialog to maximum of 220
words per minute. If a dialog exceeds that rate, selective editing is
used to insure that the Closed Captions remain up-to date with the
current TV screen dialog.
Black Box is displayed on the TV Screen.
The Text mode is selected. For Closed Captions, select CC-1,
CC-2, CC-3 or CC-4.
Network
Cannot connect to the Network.
Check if the Ethernet Cable connection is properly made. Turn
On the Broadband Router and/or Modem.
Check the Network Settings.
Check if the Broadband Router and/or Modem is correctly
connected.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Picture & Sound
No Picture or Sound
View other TV channels. The problem might be limited to the
Broadcasting Station or Weak Signal Strength.
Unplug the AC Power Cord and wait for about 1 minute, then
Plug the AC Power Cord and turn On the Unit again.
Autoprogram must be completed when you Set Up the Unit for
the First time or Move it to a location where previously
unavailable channels are broadcast.
The selected Channel cannot be viewed by the Child and
Ratings Lock Setting. p. The Unit requires some kind of Input Signal. A Digital Indoor
Antenna (VHF / UHF), a Digital External Antenna (VHF / UHF)
or an RF coaxial cable from your Wall or Set-top Box signal
(HDMI, Component+Audio or Composite [Video+Audio]) needs
to be connected to the Unit.
If there are issues with picture/color and/or sound when
connecting an external device using the HDMI port, please try
switching the HDMI mode. (Refer to HDMI mode p. )
•
•
•
•
•
•
Note(s)
•
•
LCD screen is manufactured to provide many years of
• The
useful life. Occasionally a few non active pixels may appear
as a fixed point of blue, green or red.
This is Not to be considered a Defect in the LCD screen.
Functions are not available in Specific Modes, but this
• Some
is Not a Malfunction. Read the Description in this Manual for
•
more Details on Correct Operations.
For additional troubleshooting, refer to the Frequently Asked
Questions or FAQs on www.philips.com/support.
15
English
•
•
•
•
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
6 Specifications
Model #
Picture
Type
Diagonal screen size / Aspect ratio
Viewing Angles
Built-in Digital / Analog Tuner
Sound
Mono / Stereo
Power Output (RMS watts)
Equalizer
Ease of Use
SD (4:3 Source)
HD
Picture Format
(16:9 Source)
UHD
Photo Slide Show
Music Playback
Video Playback
Channel
Channel Coverage
CATV (Analog NTSC)
Tuning System
Channel Access
Connectivity
Component Video Input
(Y/Pb/Pr)
Composite Video Input
(Shared Y Green Terminal
with Component Video)
HDMI Input
Analog Audio L/R Input
PC Input
USB
Wireless LAN
Ethernet port
Digital Audio Output
Headphone Output
Power
Power Requirements
Temperature
Operating Temperature
65PFL5922
55PFL5922
UHD (Ultra HD) (3840 x 2160 pixels 60Hz)
65”/ 16:9
54.6”/ 16:9
178° (V) by 178° (H)
ATSC (Digital) / NTSC (Analog)
50PFL5922
49.5”/ 16:9
Mono, Stereo, Sonic Emotion Premium
10W x 2
5 Band
43PFL5922
43”/ 16:9
8W x 2
: Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen
: Automatic / 4:3 / Wide screen / Full / Unscaled
: Full / Unscaled
JPEG, Progressive JPEG
MP3, WAV, AAC
MPEG1, MPEG2, H.264, MPEG4, H.265/HEVC
Over-the-Air DTV
: VHF: 2∼13
(ATSC)
UHF: 14∼69 (Each Channel may have e.g. 2.1∼2.9, 3.1∼3.9, etc)
Over-the-Air Analog : VHF: 2∼13
(NTSC)
UHF: 14∼69
2∼13, A∼W
W+1∼W+94 (Analog W+1∼W+84), A-5∼A-1, 5A
Channel Frequency Synthesized Tuning System
Direct Access Number Keyboard, Programmable Scan, Channel +(up) / -(down) and
PREV. CH (Previous Channel)
1
Supporting Video Signals : 480i/p, 720p, 1080i/p @60Hz
1
3 (selectable HDMI modes)
Supporting HDMI Video Signals : 480i/p, 720p, 1080i @60Hz, 1080p, 2160p @24/30/60Hz
Supporting HDMI Digital Audio Signals : LPCM, AC3, DD+
Supporting PC-Input Video Signal up to 4096 x 2160
1 (L Audio / R Audio)
Via HDMI and HDMI-DVI + Analog Audio L/R
1
Supporting wireless standards : IEEE 802.1 1a/b/g/n/ac (2.4GHz/5GHz)
1
1
Supporting Dolby Audio (Dolby Digital and Dolby Digital Plus)
1
1/8 inch (3.5mm)
120V∼ +/- 10%, 60Hz +/- 0.5%
41 °F (5 °C) to 104 °F (40 °C)
• Specifications are Subject to Change without Prior Notice.
16
To obtain a more detailed electronic copy of this User Manual or to access live chat support, go to www.philips.com/support
7 Warranty
LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or
the person receiving the product as a gift against defects in
materials and workmanship as based on the date of original
purchase (“Warranty Period”) from an Authorized Dealer. The
original sales receipt showing the product name and the
purchase date from an authorized retailer is considered such
proof.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements can
result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company
manufactured products that can be identified by the
trademark, trade name, or logo affixed to it. This Limited
Warranty does not apply to any hardware product or any
software, even if packaged or sold with the product, as
manufacturers, suppliers, or publishers may provide a
separate warranty for their own products packaged with the
bundled product.
The company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or other additional product or
part not covered by this warranty. Recovery or reinstallation
of programs, data or other information is not covered under
this Limited Warranty.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna/signal source systems
outside of the product.
• Product repair and/or part replacement because of
improper installation or maintenance, connections to
improper voltage supply, power line surge, lightning
damage, retained images or screen markings resulting
from viewing fixed stationary content for extended
periods, product cosmetic appearance items due to
normal wear and tear, unauthorized repair or other cause
not within the control of the company.
• Damage or claims for products not being available for use,
or for lost data or lost software.
• Damage from mishandled shipments or transit accidents
when returning product.
• A product that requires modification or adaptation to
enable it to operate in any country other than the country
for which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these
modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification
receipt can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1-866-202-5960
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE
CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO
THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of
incidental or consequential damages, or allow limitations on
how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248
17
English
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a
product that is new or which has been manufactured from
new, or serviceable used parts and is at least functionally
equivalent or most comparable to the original product in
current inventory, or (3) refund the original purchase price of
the product.
Replacement products or parts provided under this warranty
are covered against defects in materials and workmanship
from the date of the replacement or repair for ninety (90)
days or for the remaining portion of the original product’s
warranty, whichever provides longer coverage for you. When
a product or part is exchanged, any replacement item
becomes your property and the replaced item becomes
company property. When a refund is given, your product
becomes company property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
This warranty does not apply (a) to damage caused by
accident, abuse, misuse, neglect, misapplication, or
non-supplied product, (b) to damage caused by service
performed by anyone other than company approved
Authorized Service Location, (c) to a product or a part that
has been modified without written company permission, or
(d) if any serial number has been removed or defaced, or (e)
product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold
“AS IS” by some retailers.
License
P&F USA, Inc. hereby offers to deliver, upon request, a
copy of the complete corresponding source code for
the copyrighted open source code packages, on an
“AS IS” basis, used in this product for which such offer
is requested by the respective licenses. This offer is
valid up to three years after the product purchase to
anyone in receipt of this information. To obtain source
code, please contact P&F USA, Inc. You should write
to “Open Source Team, P&F USA, Inc., PO Box 2248,
Alpharetta, GA 30023-2248. P&F USA, Inc. disclaims
any and all warranties and representations with
respect to such software and related source code
including quality, reliability, usability, and accuracy,
and further disclaim all express, implied, statutory or
otherwise, including without limitation, any implied
warranties of title, non-infringement, merchantability,
or fitness for a particular purpose. P&F USA, Inc. shall
not be liable to make any corrections to the open
source software or source code or to provide any
support or assistance with respect to it. P&F USA, Inc.
disclaims any and all liability arising out of or in
connection with the use of this software and/or source
code.
i
18
Memo
.
ii
19
Model Number(s):
65PFL5922/F7, 55PFL5922/F7,
50PFL5922/F7, 43PFL5922/F7
To obtain assistance, please contact
customer care at:
1 866 202 5960
P&F USA, Inc.
PO Box 2248, Alpharetta, GA 30023-2248 U.S.A.
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura.
Huixquilucan, Edo. de México.
C.P. 52787
This product has been manufactured by and is sold
under the responsibility of P&F USA, Inc., and P&F
USA, Inc. is the warrantor in relation to this product.
The Philips trademark and the Philips Shield Emblem
are registered trademarks of Koninklijke Philips N.V.
used under license.
Printed in China
AA78ZUH-65UL / AA7RZUH-55UL /
AA7UZUH-50UX
2EMN00699
䖩䖩䖩䖩䖩
Download PDF

advertising