Power over Ethernet - PLANET Technology Corporation.

www.planet.com.tw
Power over Ethernet
Compact, Affordable, Safe & Reliable Power Solution
Cost-Effective Power Distribution
Centralized Power Management
Remote Power Feeding
Dramatically Reduce Installation Costs
Easy Plug-and-Play Installation
What is PoE?
Based on the global standard IEEE 802.3af, Power over Ethernet
(PoE) provides an innovative, standard-based application to
deliver rich functionality and flexibility to your network. PoE is
a technology for wired Ethernet and allows the 48V electrical
power carried over RJ-45 wiring to each end-device rather than
by separate power cords. PoE enables IP network applications
such as IP Cameras, VoIP Phones, and Wireless Networking
more flexibly deployed regardless of the limit availability of
outlet and therefore helps enterprises improve productivity.
Widely adopted in the market now, PoE remarkably reduces
installation costs and improves management of network.
Non PoE Connection Solution
100m
Data
Data
Uplink
PoE System Architecture
The specification of PoE typically requires two devices: the
Powered Source Equipment (PSE) and the Powered Device
(PD). The PSE is either an End-Span (ex: PoE Switch) or an MidSpan (ex: PoE Injector Hub), while the PD is a PoE powered
terminals, such as the IP Camera, IP Phones, Wireless Access
Point and etc., as shown in the figure 1.
In the PoE architecture, power can be delivered over data pairs
or spare pairs of standard CAT-5 cabling. In the standard
CAT-5 cabling, 4 wires are used in 10/100 Ethernet for power
transfer and the other 4 wires for ordinary data transfer under
PoE structure. Wherever the cable goes, the power goes too.
PoE power injector device plays either as a Mid-Span or an EndSpan terminal to deliver data and power. Mid-Span and EndSpan PoE power injector devices transmit power in different
ways which are illustrated below: [Figure 2 and Figure 3]
Power
Non PoE Switch
AC Power

PoE Camera

Mid-Span
Mid-Span device is placed between legacy Switch and the powered
device. Mid-Span is tap the unused wire pairs 4/5 and 7/8 to carry
AC Power
power, the other four is for data transmission.
PoE Injector Solution
POWERED SOURCING
EQUIPMENT(PSE)
Non PoE Switch
Uplink
5
5
+
Data + Power
PoE
Power over Ethernet
AC Power
4
4
100m
Data
POWERED DEVICE
(PD)
PoE
Injector
48V
PoE Camera
-
1
TX
2
3
RX
6
7
SPARE PAIR
SINGLE PAIR
SINGLE PAIR
1
2
RX
DC/DC
3
6
Converter
TX
7
8
8
SPARE PAIR
PoE Switch Solution
Figure 2. Mid-Span Power Delivery
100m
Data
Data + Power
Uplink
Power over Ethernet

PoE
PoE Switch
PoE Camera
End-Span
End-Span device is direct connected with power device. End-Span could also
tap the wire 1/2 and 3/6.
POWERED SOURCING
EQUIPMENT(PSE)
AC Power
POWERED DEVICE
(PD)
4
4
5
5
+/-
100Base-TX UTP
PoE
100Base-TX UTP w PoE
Power
48V
+/-
1
TX
2
3
RX
6
7
Figure 1: Power over Ethernet: Utilize the Ethernet
cable wires to transfer power in addition to data
02
Power over Ethernet
SPARE PAIR
SINGLE PAIR
SINGLE PAIR
1
2
RX
DC/DC
3
6
Converter
TX
7
8
8
SPARE PAIR
Figure 3. End-Span Power Delivery
Benefits of PLANET PoE Applications
Consider the following scenarios:
In order to minimize cabling costs, you are planning to install
the latest VoIP Phone system for your company’s new office.
The company staff demands for a wireless access point in
the public area behind the building so they could work on
their laptops in outdoor activities, but the electrical power
to the outside is not affordable.
Management asks for IP Surveillance Cameras and business
access systems throughout the facility, but they would rather
avoid another electrician’s payment.
PoE technology is the right solution for the above demanding
requirements and it helps to minimize the necessary wires
for the network distribution and lower the deployment
cost. Leading the PoE technology applications, PLANET
Technology has offered the various types of PoE equipments
in the market to meet the different powering requirements
of SOHO/home users, SMB and enterprises.
PLANET delivers the most cutting-edge PoE solutions which
offer the benefits as below:

Reduce Installation Costs
PoE devices use a single and standard Cat-5 Ethernet cable
for both power and data transmission, which eliminates
the needs of installing separate electrical wiring and
outlets. Besides, most enterprises have already run Cat
5 Ethernet cabling through the ceiling to every desktop.
The cabling for these new network applications is already
in place and thus eliminating the installation time.

Easy Deployment
With the RJ-45 connector design in PoE devices, it is easy
to add PoE powered devices such as IP cameras, IP phones,
wireless APs and Switches into the existing business network.
PoE helps your businesses grow quickly.

Protect Investment
New networking applications can take advantage of an
Ethernet connection for both power and connectivity.
Furthermore, the 802.3af complied devices also provide
detection to protect the remote devices.

Simplicity & Mobility
By using standard-based PoE products, networks can perform
the best solutions for the individual pieces of the network,
instead of being tied into a single vendor with a proprietary
system. PoE applications are highly flexible in mixing and
matching different vendors to ensure the most optimal
solution for business operation.

Integration Management
The PLANET PoE Solution is able to fully integrate with the
hardware and software. For small scale of PoE deployment,
device-level management may be adopted easily. For large
scale of Power over Ethernet installations, such as IP Telephony,
PLANET provides management solution which could help the
powered devices automatically manage themselves. This
approach reduces the total configuration requirement and
eliminates configuration errors due to inconsistency between
the application and the network ports.

Reliability with UPS
PoE devices offer centralized power delivery by an
uninterruptible power supplies (UPS) which maintains
operation even when the main power fails. Mission critical
devices, such as IP Cameras and IP Phones, keep continually
working to meet client’s various demands.

Centralized Power Management
PoE smart PSE devices offer graphic user interface to
centralized control, plan and monitoring per port power
feeding / consumption of the PD device. It helps the System
Integrator to centralize power distribution via existing
Ethernet cables with the need to increase infrastructure.
Pioneer of IP Innovation
03
PLANET PoE Application
PoE Wireless AP
Data + Power
PoE
PoE
PoE IP Camera
PoE Switch (PSE)
Power
PoE VoIP ATA
Data + Power
Data
PoE
PoE
Phone
LAN / PCs
PoE VoIP Phone
100Base-TX UTP
100Base-TX UTP w PoE
Telephone wire
Power
PoE
 Office
With the business office expansion, the additional telephones
are required, however they could be installed in less cost via the
implementation of PoE IP Telephony system compared to the
traditional circuit wiring telephony system. PLANET PoE solution
helps enterprises to create an integrated data, voice, and powered
network. PLANET 802.3af compliant IP Phones can be installed
without requirement of an additional power cable because the
power can be provided from the standard Ethernet cable. PoE IP
Phones and Analog Telephony Adapter work perfectly with PLANET
Mid-Span and End-Span equipments which inject power through the
Ethernet cables. With PLANET PoE Solution, IP Telephony becomes
more reliable and cheaper to install, which helps enterprises save
tremendous cost when upgrading to IP Telephony communications
infrastructure. PLANET PoE IP Phones including Business IP Phones,
as well as PoE ATA, may be referred for more details in the PLANET
IP Telephony Solution Guide.
 Transportation
Central Management Center
In modern time, more and more people use Internet
service during travel times, either for business or for
leisure. Besides the wired Internet network, the wireless
LAN would be more efficient for the transportation station
to provide high-speed and wide area Internet services for
travelers. With the PoE wireless LAN APs connected,
people can experience the wireless LAN roaming service
within the Wi-Fi coverage even when the transportation
itself like train, bus or ship moving on the way. By
adopting PoE Wireless LAN structure, the transportation
authority gains benefit from costing less while providing
better Internet services in wider areas for the travelers.
PoE Wireless AP (PD)
PoE
PoE
PoE
PoE
PoE Switch
PoE Switch
PoE Switch
PoE
PoE
Core Switch
PoE
PoE
PoE
PoE
PoE Wireless AP (PD)
Airport
100Base-TX UTP
PoE
100Base-TX UTP w PoE
Train
PoE Switch
SGSW-2840P
VIP-254PT
PoE
3F
 Finance
PoE
PoE
PoE (Data + Power)
2F
The PoE construction would also highly benefit to the financial /
bank security and communication system. The PoE IP Surveillance
system helps watch the bank / safe deposit security, the PoE
wireless LAN system provides the employee a convenient
Internet service and PoE IP Telephony system improves the voice
communicating in the bank with lower cost.
PoE
ICA-HM130
PoE
ICA-H312
1F
PoE
ATA-15X
PoE
ICA-HM135
100Base-TX UTP
PoE
POE-151S
POE-151S
PoE
100Base-TX UTP w PoE
Power
Ground Floor
04
Power over Ethernet
PoE Switch Product Matrix
For different applications required in different enterprises and client users, PLANET offers PoE Switches from Full Managed, Web-Smart, to
standard PoE Switches that features 4-Port PoE to 24-Port PoE choices to fulfill the varied needs of customers. With the Ethernet switching,
PoE and full power supply system are integrated in one box design, the SGSW-2840P4 and SGSW-24040P4 provide 380watts power budget to
satisfy the increasing needs for power consumption of powered devices, such as wireless AP and PoE IP camera. The IP-based remotely Web
management interface also provides an effective central power management solution to monitor and control per port power feeding of deployed
powered devices.
Description
Product
Series
Managed
Web Smart
SGSD-1022P
SGSW-2840P /
SGSW-2840P4
FGSD-1022P
FGSW-2612PVM
10/100Base-TX
8
24
8
24
24
10/100/1000
Base-T
2
4
2
2
Mini-GBIC
2
4
2
2
Model
FGSW-2620PVM SGSW-24040P
FGSW-2620VMP4 SGSW-24040P4
FNSW-1608PS /
FGSW-1828PS
GSD-802PS
FSD-804PS
-
16
-
8
2
24
-/2
8
-
2
4
-/2
2
-
Product Image
Hardware
5.6Gbps
12.8Gbps
5.6Gbps
8.8Gbps
8.8Gbps
48Gbps
3.2 / 7.2Gbps
16Gbps
1.6Gbps
MAC Table
8K
8K
8K
8K
8K
8K
4K
8K
1K
Jumbo Frame
9K
9K
9K
9K
9K
9K
-
9K
-
24
8
8
4
Switch Fabric
PoE
IEEE 802.3af
PoE Standard
Units Can Be
Powered
8
24
8
12
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
110W
220W / 380W
180W
110W
190W/380W
220W/380W
110W
110W
55W
PoE Priority









Power Limit









Power Status
Monitor









PoE Schedule
-
-
-
-
-

-
-
-
Port Configure









Port Mirror
TX, RX, Both
TX, RX, Both
TX, RX, Both
TX, RX, Both
TX, RX, Both
TX, RX, Both
-
TX
-
Port Trunk
5 groups /
8-Port
12 groups
/ 8-Port
13 groups
/ 8-Port
13 groups
/ 8-Port
13 groups / 8-Port
12 groups /
16-Port
2 groups / 4-Port
8 groups
/ 8-Port
-
LACP
5 groups /
8-Port
12 groups
/ 8-Port
13 groups
/ 8-Port
13 groups
/ 8-Port
13 groups / 8-Port
12 groups /
16-Port
-
8 groups
/ 8-Port
-
-
-







802.1Q VLAN






*


Spanning
Tree
802.1d






-

-
802.1w






-

-
Multicast
IGMP Snooping
v1, v2
v1, v2
v1, v2
v1, v2
v1, v2
v1, v2, v3
v1, v2 *
v1, v2
-
Quality
of Service
802.1p Priority
 / 4 queues
 / 4 queues
 / 4 queues
 / 4 queues
 / 4 queues
 / 4 queues
 / 2 queues
IP DSCP









Rate Control
Ingress







-

Egress







-

IEEE 802.1x
Static MAC
MAC Filter
Static MAC *
IEEE 802.1x
Static MAC
-
PoE Power
Output
Power
Pin Assignment
Power Budget
Interface
Link
Aggregation
VLAN
Port-Based
48V DC, Max. 15.4 Watts, 350mA
Security
Management
24
IP/MAC ACL,
IEEE 802.1x Port Security
 / 4 queues  / 2 queues
Console






-
-
-
Web
Management









Telnet






-
-
-
SNMP
v1, v2c, v3
v1, v2c, v3
v1, v2c, v3
v1, v2c
v1, v2c
v1, v2c, v3
-
v1, v2c
Trap
Firmware
Upgrade
TFTP
TFTP
TFTP/Web
TFTP/Web
TFTP/Web
TFTP/Web
Web
Web
Web
Stacking


-
-
-

-
-
-
330 x 155 x 43.5
440 x 300 x 44
330 x 155 x 43.5
440 x 265 x 44
440 x 300 x 44
440 x 300 x 44
440 x 120 x 44
330x155x43.5
217x135x43
Dimension (W x D x H mm)
Power Supply
EMI Safety
100~240V AC, 50/60Hz, Universal Power Supply
FCC Class A, CE
* Hardware Version 2
Pioneer of IP Innovation
05
Layer 2 Managed 802.3at PoE Switch Product Matrix
Layer 2 Managed 802.3at PoE Switch
Description
Product
Series
Model
FGSD-1022HP
WGSW-2620HP
WGSD-8020HP
SGSW-24040HP
8
2
2 combo
SFP
5.6Gbps
8K
9K
802.3af / 802.3at
8
52V DC, Max. 30.8 watts
150 watts
End-Span
1/2(+), 3/6(-)




TX, RX, Both


13 Groups / 8 Ports






v1, v2

 / 4 queues







 / 512






v1, v2c, v3

1,2,3,9
-/
-
24
2
2 combo
SFP
8.8Gbps
8K
9K
802.3af / 802.3at
24
52V DC, Max. 30.8 watts
320 watts
End-Span
1/2(+), 3/6(-)




TX, RX, Both


13 Groups / 8 Ports






v1, v2

 / 4 queues







 / 512






v1, v2c, v3

1,2,3,9
- /
-
8
compatible
2 combo
SFP
16Gbps
8K
9K
802.3af / 802.3at
8
52V DC, Max. 30.8 watts
150 watts
End-Span
1/2(+), 3/6(-)





TX, RX, Both


4 Groups / 8 Ports






v1, v2, v3


 / 4 queues









 / 64
By ACL
 / 1024 MAC






v1, v2c, v3

1,2,3,9
 /
-
24
compatible
4 combo
SFP
2 x 5Gbps
68Gbps
8K
9K
802.3af / 802.3at
24
52V DC, Max. 30.8 watts
320 watts
End-Span
1/2(+), 3/6(-)
(Future support)




TX, RX, Both


12 Groups / 16 Ports






v1, v2, v3


 / 4 queues








 / 64
By ACL
 / 1024 MAC






v1, v2c, v3

1,2,3,9
 /

 /
Product Image
Hardware
PoE
Interface
Link
Aggregation
VLAN
Spanning
Tree
Multicast
QoS
Rate Control
Access Control List
Security
Management
Stacking
10/100Base-TX
10/100/100Base-T
100Base-FX
1000Base-SX/LX
Fiber Connector Type
Stacking Interface
Switch Fabric
MAC Table
Jumbo Frame
PoE Standard
PoE 802.3af Port
PoE Power Output
PoE Budget
PSE Type
Power Pin Assignment
Over Temperature Protection
PoE Schedule
Power Limit
PoE Classification
Port Configure (Speed/ Duplex)
Port Mirror
Port Trunk
802.3ad LACP
Groups / Ports per Group
Port-Based
802.1Q VLAN
Private VLAN
802.1d
802.1w
802.1s
IGMP Snooping
IGMP Querier
MVR
802.1p priority
IP TOS/DSCP
Protocol Number (TCP/UDP)
Ingress
Egress
IP-Based
MAC-Based
TCP / UDP
802.1x Port-Based
MAC-Based
Static MAC
MAC Binding
MAC Filtering
Port Security
RADIUS
TACACS+
IPv6 Management
Console (RS-232)
Telnet
Web Management
SNMP
SNMP Trap
RMON
SSH/SSL
Single IP Management
Local System log / Remote Syslog
LLDP
Dimension ( W x D x H)
Power Requirement
EMI / Safety
06
Power over Ethernet
-
-
/




330 x 155 x 43.5mm
440x300x44 mm
330 x 155 x 43.5mm
440x300x44 mm
100~240V AC, 50/60Hz
100~240V AC, 50/60Hz
100~240V AC, 50/60Hz
100~240V AC, 50/60Hz
FCC Class A, CE
FCC Class A, CE
FCC Class A, CE
FCC Class A, CE
PoE Injector Hub Product Matrix
The PLANET POE-400/1200/2400 Series is a 4/12/24Port IEEE 802.3af Power over Ethernet Injector Hub
complied with IEEE 802.3, IEEE 802.3u and IEEE 802.3af
standards. Equipped with 4/12/24 10/100Base-TX
Fast Ethernet ports, the products support full 48VDC
power for remote IEEE 802.3af Powered Devices like
Wireless LAN Access Point, IP Phone, and IP Camera.
Supporting power supply up to 380 Watts, the POE1200P2/1200G/2400P4/2400G provides sufficient
power to the 12/24 remote devices.
Conventional
Ethernet Switch
WGSW-2840
POE-2400P4
PoE
ATA-151PE
PoE
To manage the powered devices, the POE-1200/2400
provides Web management interfaces for management of
port enable/disable, port priority, system configuration,
and username/password change with smart features
for powered devices. The Hub can automatically detect
the power status on each port and display massages
on Web management interface. These features provide
a cost-effective way of remote management whenever
you are at work or at home.
Telephone
Model
PoE
VIP-255PT
VIP-255PT
100Base-TX UTP
PoE
100Base-TX UTP w PoE
Telephone wire
PoE Injector Hub
Description
Product
Series
VIP-255PT
PoE
POE-400
POE-1200
POE-1200P2
POE-1200G
POE-2400
POE-2400P4
POE-2400G
RJ-45 Data
Input Ports
4
12
12
12
24
24
24
RJ-45 “Data
+ Power”
Output Ports
4
12
12
12
24
24
4
10/100Mbps
10/100Mbps
10/100Mbps
10/100/1000Mbps
10/100Mbps
10/100Mbps
10/100/1000Mbps
24
24
24
Product Image
Interface
Data Rate
PoE
PoE Standard
Units can be
Powered
IEEE 802.3af Power over Ethernet
4
12
12
PoE Power Output
Power Pin
Assignment
48V DC, Max. 15.4 Watts, 350mA
4/5(+), 7/8(-)
4/5(+), 7/8(-)
4/5(+), 7/8(-)
4/5(+), 7/8(-)
4/5(+), 7/8(-)
4/5(+), 7/8(-)
4/5(+), 7/8(-)
60W
110W
190W
190W
220W
380W
380W
PoE Priority
-






Power Limit
-
*


*


Power Status
Monitor
-






PoE Schedule
-
-
-

-
-

Management
Interface
-
Web
Web
Web/SNMP
Web
Web
Web/SNMP
Firmware Upgrade
-
Web
Web
Web
Web
Web
Web
SNMP Trap
-
*


*
*

70 x 97 x
26 mm
440 x 200 x
44 mm
440 x 200 x
44 mm
440 x 200 x 44 mm
440 x 200 x
44 mm
440 x 200 x
44 mm
440 x 200 x 44 mm
220g
2.8kg
2.8kg
2.8kg
3.32kg
3.32kg
3.32kg


Power Budget
Layer 2
Feature
12
Hardware Dimension
(W x D x H)
Weight
Power Supply
48V DC, 1.5A
100~240V AC, 50/60Hz, Universal Power Supply
EMI Safety
Rack-mountable
FCC Class A, CE
-




* Hardware Version 2
Pioneer of IP Innovation
07
High Power 802.3at PoE Injector Hub Product Matrix
PoE Injector Hub
Description
Model
HPOE-1200G
HPOE-2400G
HPOE-400
RJ-45 Data Input Ports
12
24
4
RJ-45 Data Output Ports
12
24
4
10/100/1000Mbps
10/100/1000Mbps
10/100/1000Mbps
802.3af / 802.3at
802.3af / 802.3at
802.3af / 802.3at
12
24
4
52V DC, Max. 30.8 watts
52V DC, Max. 30.8 watts
52V DC, Max. 30.8 watts
4/5(+), 7/8(-)
4/5(+), 7/8(-)
4/5(+), 7/8(-)
Power Budget
150 watts
320 watts
120 watts
PSE Type
Mid-Span
Mid-Span
Mid-Span
Over Temperature Protection


-
PoE Schedule


-
Power Limit


-
PoE Priority


-
PoE Classification


-
Web Management


-
v1, v2c
v1, v2c
-


-
HTTP, TFTP
HTTP, TFTP
-


-
440 x 300 x 44 mm
440 x 300 x 44 mm
70 x 97 x 26mm


-
Internal
Internal
External
100~240V AC, 50/60Hz
100~240V AC, 50/60Hz
52VDC, 2.5A
FCC Class A, CE
FCC Class A, CE
FCC Class A, CE
Product
Series
Product Image
Hardware
Data Rate
PoE
PoE Standard
PoE 802.3af Port
PoE Power Output
Power Pin Assignment
Management
SNMP
SNMP Trap
Firmware Upgrade
Configuration backup/recovery
Mechanical
Dimension ( W x D x H )
Rackmountable
Power Supply
Power Requirement
Rugulator
EMI / Safety
* Hardware Version 2
PTZ / Speed Dome Camera
30W
IP Camera
802.3at
802.3af
High Power PSE
15W
08
Power over Ethernet
30W
POE-2400G
PoE Single-Port Injector Product Matrix
Description
PoE Injector
FTP-802 /
FTP-802S15
POE-161
POE-152
POE-151
POE-100
1 x 100Base-FX SC
1
1
1
1
1
1
1
1
1
Data Rate
10/100Mbps
10/100/1000Mbps
10/100/1000Mbps
10/100Mbps
PoE Standard
IEEE 803.3af
IEEE 803.3at*
1
1
1
1
1
PoE 48V DC,
Max. 15.4 Watts, 350mA
PoE 56V DC
PoE 48V DC,
Max. 15.4 Watts, 350mA
PoE 48V DC,
Max. 15.4 Watts, 350mA
PoE 15V DC
1/2(+), 3/6(-)
4/5(+), 7/8(-)
1/2(+), 3/6(-)
4/5(+), 7/8(-)
4/5(+), 7/8(-)
Power Budget
15.4 Watts
30 Watts
LED Indicator
1 x Power; 1 x FX, LNK/ACT;
1 x TX, LNK/ACT;
PoE in Use : Detect PSE Device
1 x power, 1 x POE ready / in-use
Cooper : RJ-45
Fiber : SC, Multi-mode
patch cord
TIA/EIA-568, Cataegory 5/5e/6 cable
Product
Series
Model
Product Image
Interface
RJ-45 Data Input Ports
RJ-45 “Data+Power”
Output Ports
PoE
Units can be Powered
Power Output
Power Pin Assignment
Ethernet Cable
Hardware
Dimension ( W x D x H)
15.4 Watts
94 x 72 x 30 mm
73 x 55 x 24 mm
73 x 55 x 24 mm
69 x 93 x 25 mm
220g
90g
50g
50g
90g
48V DC, 0.4A,
External AC adapter
56V DC, 075A,
External AC adapter
Metal
Plastic
CE, FCC Class A
CE, FCC Class A
Material
EMI Safety
Pre-standard
94 x 70 x 26 mm
Weight
Power Supply
10/100Mbps
IEEE 802.3af Power over Ethernet
48V DC, 0.4A, External AC adapter
Plastic
Plastic
Metal
CE, FCC Class B
* IEEE 803.3at Pre-Standard
PoE and Distance Extension
Outdoor AP
Power
PoE
100
Data
Power
POE-151
POE-E101
Switch
POE-E101
PoE
FTP-802
PoE IP Camera
PoE
Data
PoE Extender
PoE Camera
Power
Data
0m
POE-151
PoE
100m
200m
300m
400m
500m
600m
100Base-TX UTP
PoE
100Base-TX UTP with PoE
100
100Base-FX Fiber-optic
Pioneer of IP Innovation
09
PoE Single-Port Splitter Product Matrix
Description
PoE Splitter
Model
PoE Extender
POE-161S
POE-152S
POE-151S
POE-100S
POE-E101
RJ-45 Data Output Ports
1
1
1
1
1
RJ-45 “Data+Power”
Input Ports
1
1
1
1
1
10/100/1000Mbps
10/100/1000Mbps
10/100Mbps
10/100Mbps
10/100Mbps
Pre-Standard*
IEEE 802.3af
Product
Series
Product Image
Interface
Data Rate
PoE
PoE Standard
IEEE 802.3at***
Units can be Powered
Power Input
Power Output
Hardware
IEEE 802.3af Power over Ethernet
1
1
1
1
1
PoE 56V DC
PoE 48V DC
PoE 48V DC
PoE 15V DC
PoE 48V DC
5V / 12V DC, Max. 5A
(adjustable)
5V / 12V DC, Max. 2A
(adjustable)
5V / 12V DC, Max. 2A
(adjustable)
5V / 9V/ 12V DC,
Max. 2A (adjustable)
PoE 48V DC
(802.3af PoE 48V DC**)
1 x Power, 1 x IN,
1 x OUT
LEDs
1 x Power
Ethernet Cable
TIA/EIA-568, Cataegory 5/5e/6 cable
Dimension ( W x D x H)
94 x 72 x 30 mm
73 x 55 x 24 mm
73 x 55 x 24 mm
69 x 93 x 25 mm
94 x 70 x 26 mm
Weight
90g
50g
50g
90g
190g
Material
Plastic
Plastic
Plastic
Metal
Metal
EMI Safety
CE, FCC Class B
* Pre-Standard should run in pair.
CE, FCC Class A
** Output power consumption vary on number of POE-E101 cascade.
*** Pre-Standard
PoE and Supplied Power Consumption
Speed Dome
Camera
POE-161S
Data
Power
DC
PoE
802.3at
PoE Splitter
11n Access Point
Data
Power
POE-152S
PoE
DC
802.3af
PoE Injector
PoE Splitter
POE-E101
IP Dome Camera
PoE
PoE
Distance 100m
802.3af
PoE Extender
DC
Power Line (DC)
PoE
100Base-TX UTP with PoE
100Base-TX UTP
0W
10
Power over Ethernet
<15W
15.4W
25W
Industrial Power over Ethernet
the wall, ceiling or any unreachable place. A wire that carries
both data and power lowers the installation costs, simplifies
the installation effort and eliminates the need for electricians
or extension cords.
PoE feature is more often supported in the industrial
Ethernet devices for efficient operation in harsh
environments. The PLANET industrial PoE switch series
in-line power follows standard IEEE 802.3af and able to
give power to PoE compliant devices at the distance up
to 100 meters through the 4-pair Cat 5 / 5e UTP wire.
With Data and Power over Ethernet from one unit, the
Industrial PoE series shall reduce cables deployment and
eliminates the need for dedicated electrical outlets on
Furthermore, there is only 24V DC input in some industrial
environments, the ISW-504Px / ISW-514Px series supports 24V
DC or 48V DC dual voltages input and able to provide more
wide range of industrial IEEE 802.3af PoE applications.
Manufactory Networking , Surveillance and Wireless Service
Management interfaces
100
PoE
100
ISW-514PS
PoE
PoE IP Cam
PoE
Fiber
PoE
PoE IP Cam
100
Control Center
Fiber
PoE
PoE
ISW-514PSF
PoE IP Phone ISW-514PSF
PC
Steel Factory (1)
PoE Wireless AP
Warehouse
PoE
PoE IP Phone
PoE IP Cam
100
100Base-FX Fiber-optic
100Base-TX UTP
Steel Factory (2)
PoE
100Base-TX UTP with PoE
4-Port 10/100Mbps with PoE + 1-Port
100FX Industrial Web Smart Switch
ISW-514PSF / ISW-514PS
Pioneer of IP Innovation
11
Industrial Power over Ethernet Switch Product Matrix
Unmanagement
Description
Product
Series
Model
Management
ISW-504PT
ISW-514PT
ISW-514PTF
ISW-504PS
ISW-514PS
ISW-514PSF
ISW-1022MPT
10/100Base-TX
5
4
4
5
4
4
8
10/100/100Base-T
-
-
-
-
-
-
2
100Base-FX
-
1 / MM / 2km
1
-
1 / MM / 2km
1
-
1000Base-SX/LX
-
-
-
-
-
-
2 combo
Product Image
Hardware
Fiber Connector Type
Switch Fabric
MAC Table
PoE
PoE Standard
PoE 802.3af Port
PoE Budget
-
SC
SFP
-
SC
SFP
SFP
1.0G
1.0Gbps
1.0Gbps
1.0G
1.0Gbps
1.0Gbps
5.6G
2K
2K
2K
1K
1K
1K
8K
802.3af
802.3af
802.3af
802.3af
802.3af
802.3af
802.3af
4
4
4
4
4
4
8
60 watts max.
60 watts max.
60 watts max.
60 watts max.
60 watts max.
60 watts max.
130 watts
End-Span
End-Span
End-Span
End-Span
End-Span
End-Span
End-Span
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
1/2(+), 3/6(-)
Port Configure
(Speed/ Duplex)
-
-
-




Port Mirror
-
-
-
TX, RX, Both
TX, RX, Both
TX, RX, Both
TX, RX, Both
Port Trunk
-
-
-
-
-
-

802.3ad LACP
-
-
-
-
-
-

Groups /
Ports per Group
-
-
-
-
-
-
4 Groups/4 Ports
Port-Based
-
-
-




802.1Q VLAN
-
-
-




GVRP
-
-
-
-
-
-

Active VLAN
-
-
-
16
16
16
256
Spanning
Tree
802.1d
-
-
-
-
-
-

802.1w
-
-
-
-
-
-

Multicast
IGMP Snooping
-
-
-
-
-
-
v1, v2
QoS
IGMP Querier
-
-
-
-
-
-

802.1p priority
-
-
-
 / 2 levels
 / 2 levels
 / 2 levels
 / 8 levels
Port-Based
-
-
-




PSE Type
Power Pin Assignment
Interface
Link
Aggregation
VLAN
Rate Control
Security
Management
Mechanical
IP TOS/DSCP
-
-
-
DSCP
DSCP
DSCP
TOS
Ingress
-
-
-
 / 128Kbps
 / 128Kbps
 / 128Kbps
 / 100Kbps
Egress
-
-
-
 / 128Kbps
 / 128Kbps
 / 128Kbps
 / 100Kbps
802.1x Port-Based
-
-
-
-
-
-

Static MAC
-
-
-
-
-
-

MAC Binding
-
-
-
-
-
-
IP-MAC Binding
MAC Filtering
-
-
-
-
-
-

IP Filtering
-
-
-
-
-
-

Console (RS-232)
-
-
-
-
-
-

Telnet
-
-
-
-
-
-

Web Management
-
-
-




SNMP
-
-
-
-
-
-
v1, v2c, v3
SNMP Trap
-
-
-




Firmware Upgrade
-
-
-
HTTP
HTTP
HTTP
TFTP
Local System log /
Remote Syslog
-
-
-
-
-
-
 /
Time Server
-
-
-
-
-
-

DHCP Server
-
-
-
-
-
-

Dimension
(WxDxH)
Power
Requirement
135 x 87.8 x 56 mm
135 x 87.8 x 56 mm
135 x 87.8 x 56 mm
135 x 87.8 x 56 mm
135 x 87.8 x 56 mm
135 x 87.8 x 56 mm
72mm x 105mm x 152mm
24V or 48V DC
24V or 48V DC
24V or 48V DC
24V or 48V DC
24V or 48V DC
24V or 48V DC
48V DC
24V or 48V DC
24V or 48V DC
24V or 48V DC
24V or 48V DC
24V or 48V DC
24V or 48V DC
48V DC
FCC Class A, CE UL, cUL
Redundant Power
Rugulator
EMI / Safety
FCC Class A, CE
FCC Class A, CE
FCC Class A, CE
FCC Class A, CE
FCC Class A, CE
FCC Class A, CE
Environment
Operating
-40~75 Degree C
-40~75 Degree C
-40~75 Degree C
-10~60 Degree C
-10~60 Degree C
-10~60 Degree C
-40~75 Degree C
Storage
-40~85 Degree C
-40~85 Degree C
-40~85 Degree C
-40~85 Degree C
-40~85 Degree C
-40~85 Degree C
-40~85 Degree C
12
Power over Ethernet
PoE Power Device - IP Camera Product Matrix
IP Cameras
Description
Product
Series
Model
ICA-HM125
ICA-HM135
ICA-HM230
ICA-HM350
ICA-H312
ICA-107P
1/3” Progressive Scan
CMOS 2.0 megapixel
1/4” Mega-Pixel
CMOS 1.3 megapixel
1/3” Mega-Pixel
CMOS 1.3 megapixel
1/4” Mega-Pixel
CMOS 1.3 megapixel
1/3” Sony CCD
1/4” Color CMOS
Product
Image
Sensor
Lens
View Angle
6mm, f: 1.2
2.7-9mm, f: 2.0
6mm, f: 1.6
6mm, f: 1.8
6mm, f: 1.8
3.6mm, f: 2.0
H: 43 Degree
V: 33 Degree
H: 20-59 Degree
V: 15-46 Degree
H: 48 Degree
V: 33 Degree
H: 39 Degree
V: 29 Degree
H: 43 Degree
V: 33 Degree
H: 47 Degree
V: 36 Degree
Day & Night
-
Yes
-
Yes
Yes
-
1.0 Lux
1.0 Lux
1.0 Lux
1.0 Lux
0.1 Lux
1.9 Lux
H.264 / M-JPEG
H.264 / MPEG-4 /
M-JPEG
H.264 / MPEG-4 /
M-JPEG
H.264 / MPEG-4 /
M-JPEG
H.264 / MPEG-4 /
M-JPEG
M-JPEG
1600 x 1200 (15fps)
1280 x 720 (30fps)
720 x 240 (30fps)
1280 x 1024 (15fps)
1024 x 768 (15fps)
680 x 480 (30fps)
1280 x 1024 (15fps)
1024 x 768 (15fps)
680 x 480 (30fps)
1280 x 1024 (15fps)
1024 x 768 (15fps)
680 x 480 (30fps)
704 x 480 (30fps)
640 x 480 (30fps)
Two-way,
built-in mic
Two-way
Two-way,
built-in mic
Two-way
Two-way
-
Yes
Yes
Yes
Yes
Yes
-
Sensibility (Lux)
Image Compression
Max. Resolution
(Framerate)
Audio Support
3GPP
RS-485
-
Yes
-
Yes
Yes
-
DI / DO
2/1
1/1
-
1/1
1/1
-
SD Slot
SD Card
-
-
-
-
-
IEEE802.3af
IEEE802.3af
IEEE802.3af
IEEE802.3af
IEEE802.3af
-
-
IP-66 with Vandal-Proof
-
IP-66
IP-66
-
PoE
Other
Non-Stop Operating via PoE System - Example on Surveillance System
Managment
PoE
100Base-TX UTP with PoE
100Base-TX UTP
Management
PC
AC
Power Line (AC)
AC AC
Fast Ethernet PoE Switch
AC
Power
Breakdown
UPS
AC
PoE
PoE
IP Camera
IP Camera
X
PoE
IP Camera
PoE
PoE Camera
X
Locations of
No Power Socket
Locations of
Un-regulated Power Supply
Pioneer of IP Innovation
13
PoE Power Device - VoIP
IP Phone
Description
Model
Product
Series
ATA-150 / S
VIP-156 / PE
VIP-254T / PT
VIP-255PT
VIP-560PT
Product Image
Hardware
Wireless Interface
-
-
-
-
-
1 LAN
2 LAN
2 LAN
2 LAN
2 LAN
-
- / IEEE 802.3af
- / IEEE 802.3af
1 FXS / 2 FXS
1 FXS
-
-
-
Base on Telephone
2 lines LCD
4 lines LCD
6 lines LCD
Backlight Screen
Base on Telephone



Microphone & Speaker
Base on Telephone



Ethernet Port (RJ-45)
PoE
FXS / FXO / PSTN (RJ-11)
LCD Display
Voice
Features
SIP v2 (RFC 3261)





SIP Account
2
3
3
1
4
Voice Lines
1/2
1
1
1
4
-
-
FoIP*
T.38
VAD / CNG / Echo Cancellation

-


G.711 u/a, G.723.1,
G.711 u/a, G.723.1,
G.711 u/a, G.723.1, G.726, G.729 a/b, GSM G.726,
G.729 a/b, GSM
G.729 a/b, G.726
In-Band, Out-of-Band (RFC2833), SIP INFO
Voice Codec
DTMF

NAT Transversal
Telephony
Features
IEEE 802.3af
STUN / Outbound

G.711 u/a, G.723.1,
G.729 a/b, G.722
STUN
3-Way Conference





Caller ID





Call Mute / Hold





Call Waiting





Call Forward / Transfer





Do Not Disturb (DND)





Phonebook





Message Waiting Indicator (MWI)





Auto-Provisioning





Qos





-
-




-
-
-
-
-


-
-
-
-
ToS/ Diffserv
SNMP
DHCP Server
PPPoE / DHCP / Fixed IP
Fixed IP, PF PoE, DHCP client
NAT Router
-
Management


Web, Keypad, Utility
Web, Keypad
PLANET PoE Schedule for Power Saving
AM 08:00
PM 05:00
PM 05:00
POE-2400G
POE-2400G
PoE
PoE
PoE
PoE
PoE
PoE
Power
On
Power
On
Power
On
6 Watts
6 Watts
12 Watts
12 Watts
Power
Off
Power
Off
Power
Off
Power
On
6 Watts
6 Watts
12 Watts
12 Watts
Save 24Watts / hr during off-business hours
Total Saved = 10800Watts / month
PoE
14
Power over Ethernet
PoE
PoE
Power
On
Total consumed 36Watts / hr
AM 08:00
100Base-TX UTP with PoE
PoE Power Device - Wireless
Description
Product
Series
802.11n Series
Model
WNAP-1120PE
MESH Series
WNAP-3000PE
MAP-3100
MAP-3120
MAP-3020
Product Image
Wireless
Standard
Max. Data Rate
Antenna
WLAN
Security
Functional
Features
IEEE 802.11a/b/g
300Mbps
54Mbps
2 External Antenna
3 External Antenna
1 x LAN
1 x LAN
(802.3af PoE / Gigabit)
Access Point

AP Client
2 x Omni antenna, detachable
Optional
1 x WAN, 4 x LAN
1 x Public
4 x LAN
1 x Public
1 x LAN






-
-
-
Bridge





WDS

-
-
-
-
Repeater


-
-
-
64 / 128 Bit WEP





WPA





WPA2





WPS Support


-
-
-
Multiple SSID





MAC Filter
MAC Filter



DHCP Server



-
-
WMM Support


-
-
-
-
-

-
-
Networking Interface
WLAN
Operating
Mode
IEEE 802.11b/g/n
Filter
QoS
PLANET PoE Priority for Critical Services - Example on VoIP System
No PoE Priority
With PoE Priority
Over Loaded
Over Loaded
PoE
PoE
Powered
PoE
Not Powered
PoE
PoE
Not Powered
PoE
PoE
PoE
PoE
PoE
Critical mission
PoE device
PoE
High Priority
Low Priority
Not critical mission PoE device
Powered
Not critical mission PoE device
Critical mission
PoE device
100Base-TX UTP with PoE
Pioneer of IP Innovation
15
PLANET reserves the right to change specification without prior notice. All brand names and trademarks are property of their respective owners.
@ PLANET Technology Corporation CS-POE0111
Download PDF

advertising