Yamaha RX-V630 Owner's manual

Add to My manuals
67 Pages

advertisement

Yamaha RX-V630 Owner's manual | Manualzz

RX-V630

AV Receiver

U

0100V630(U)-cv1 1 12/27/01, 7:45 PM

OWNER’S MANUAL

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

1 Read Instructions – All the safety and operating instructions should be read before the product is operated.

2 Retain Instructions – The safety and operating instructions should be retained for future reference.

3 Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

4 Follow Instructions – All operating and use instructions should be followed.

5 Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

6 Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7 Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8 Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

9 A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

SAFETY INSTRUCTIONS

10 Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11 Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12 Grounding or Polarization – This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13 Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

14 Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

15 Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16 Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17 Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18 Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19 Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water,

I CAUTION

0101V630_Cau_EN(U) 2 12/27/01, 7:45 PM

d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service.

20 Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other hazards.

21 Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

22 Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

23 Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

24 Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/

NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING

ELECTRIC

SERVICE

EQUIPMENT

MAST

GROUND

CLAMP

NEC – NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810–20)

GROUNDING CONDUCTORS

(NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

FCC INFORMATION (for US customers only)

1.

IMPORTANT NOTICE : DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the

FCC, to use the product.

2.

IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3.

NOTE : This product has been tested and found to comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and

“ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics

Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

CAUTION II

0101V630_Cau_EN(U) 3 12/27/01, 7:45 PM

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2 Install this unit in a well ventilated, cool, dry, clean place with at least 30 cm on the top, 20 cm on the left and right, and 10 cm at the back of this unit

— away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.

3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. To prevent fire or electrical shock, do not place this unit where it may get exposed to rain, water, and/or any type of liquid.

4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in a environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5 On the top of this unit, do not place:

– Other components, as they may cause damage and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may cause electrical shock to the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections are complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury.

YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13 To prevent damage by lightning, disconnect the power cord from the wall outlet during an electrical storm.

14 Take care of this unit so that no foreign objects and/or liquid drops inside this unit.

15 Do not attempt to modify or fix this unit. Contact qualified YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons.

16 When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

17 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that this unit is faulty.

18 Before moving this unit, press STANDBY/ON to set this unit in the standby mode, and disconnect the

AC power plug from the wall outlet.

19 VOLTAGE SELECTOR (China and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage

BEFORE plugging into the AC main supply.

Voltages are 110/120/220/240 V AC, 50/60 Hz.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

IMPORTANT

Please record the serial number of this unit in the space below.

MODEL:

Serial No.:

The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future reference.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian

ICES-003.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer

Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the

Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

III CAUTION

0101V630_Cau_EN(U) 4 12/27/01, 7:45 PM

INTRODUCTION

CONTENTS

INTRODUCTION

CONTENTS ............................................................ 1

FEATURES ............................................................. 2

GETTING STARTED ............................................ 3

Checking the package contents ................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel ................................................................ 4

Remote control .......................................................... 6

Using the remote control ........................................... 7

Front panel display .................................................... 8

PREPARATION

SPEAKER SETUP ................................................. 9

Speakers .................................................................... 9

Speaker placement .................................................... 9

Connecting the speakers .......................................... 10

CONNECTIONS .................................................. 13

Before connecting components ............................... 13

Connecting video components ................................ 14

Connecting audio components ................................ 16

Connecting the antennas ......................................... 17

Connecting an external amplifier ............................ 18

Connecting an external decoder .............................. 18

Connecting the power supply cords ........................ 19

Turning on the power .............................................. 19

SPEAKER MODE SETTINGS .......................... 20

ADJUSTING SPEAKER OUTPUT LEVELS .. 21

Before you begin ..................................................... 21

Using the test tone ................................................... 21

ADVANCED OPERATION

SET MENU ........................................................... 40

Adjusting the items on the SET MENU .................. 40

1 SPEAKER SET (speaker mode settings) ............ 41

2 LFE LEVEL ........................................................ 43

3 SP DLY TIME (speaker delay time) ................... 43

4 D. RANGE (dynamic range) ............................... 44

5 L/R BALANCE (balance of the main left and right speakers) ..................................................... 44

6 HP TONE CTRL (headphone tone control) ........ 44

7 I/O ASSIGN (input/output assignment) .............. 44

8 INPUT MODE (initial input mode) .................... 45

9 DISPLAY SET .................................................... 45

10MEM. GUARD (memory guard) ........................ 45

REMOTE CONTROL FEATURES ................... 46

Control area ............................................................. 46

Setting the manufacturer code ................................. 47

Clearing setup manufacturer codes ......................... 47

Controlling other components ................................. 48

ADJUSTING THE LEVEL OF THE EFFECT

SPEAKERS ....................................................... 49

ADJUSTING THE DELAY TIME ..................... 50

ADJUSTING THE PARAMETER SETTINGS

FOR PRO LOGIC MUSIC ......................... 51

Changing parameter settings ................................... 51

PRO LOGIC Music parameter descriptions ....... 51

ADDITIONAL INFORMATION

TROUBLESHOOTING ...................................... 52

GLOSSARY .......................................................... 56

SPECIFICATIONS .............................................. 58

BASIC OPERATION

BASIC PLAYBACK ............................................ 23

Input modes and indications .................................... 25

Selecting a sound field program .............................. 26

DIGITAL SOUND FIELD PROCESSING

(DSP) ................................................................. 29

Understanding sound fields ..................................... 29

Hi-Fi DSP programs ................................................ 29

CINEMA-DSP ...................................................... 30

Sound design of CINEMA-DSP ............................. 30

CINEMA-DSP programs ........................................ 32

TUNING ................................................................ 34

Automatic and manual tuning ................................. 34

Presetting stations .................................................... 35

Tuning in to a preset station .................................... 37

Exchanging preset stations ...................................... 37

SLEEP TIMER ..................................................... 38

Setting the sleep timer ............................................. 38

Canceling the sleep timer ........................................ 38

RECORDING ....................................................... 39

1

0102V630_1-8_EN(U) 1 12/27/01, 7:45 PM

Built-in 6-channel power amplifier

◆ Minimum RMS output power

(0.06% THD, 20 Hz – 20 kHz, 8

Ω)

Main: 75 W + 75 W

Center:

Rear:

75 W

75 W + 75 W

Rear center: 75 W

Multi-mode digital sound field processing

◆ Dolby Pro Logic/Dolby Pro Logic decoder

◆ Dolby Digital/Dolby Digital EX decoder

◆ DTS/DTS-ES compatible decoder

◆ CINEMA DSP: Combination of YAMAHA DSP technology and Dolby Pro Logic, Dolby Digital or DTS

◆ Virtual CINEMA DSP

◆ SILENT CINEMA DSP

Sophisticated AM/FM Tuner

◆ 40-Station random access preset tuning

◆ Automatic preset tuning

◆ Preset station shifting capability (Preset editing)

FEATURES

Other features

◆ 96-kHz/24-bit D/A converter

◆ “SET MENU” for optimizing this unit for your

Audio/Video system

◆ Test tone generator for easier speaker balance adjustment

◆ 6-channel external decoder input

◆ S-video signal input/output capability

◆ Component video input/output capability

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Remote control with preset manufacturer codes

About this manual

y

indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part for the reason of the improvement in operativity ability, and others. In this case, the product has priority.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

“DTS”, “ES” and “DTS Digital Surround” are trademarks of

Digital Theater Systems, Inc.

2

0102V630_1-8_EN(U) 2 12/27/01, 7:45 PM

GETTING STARTED

Checking the package contents

Check your package to make sure it contains the following items.

Remote control Batteries (4)

(AAA, R03, UM-4)

AM loop antenna

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

STANDBY

MD/CD-R TUNER

SYSTEM

POWER

SLEEP

DVD D-TV/CBL V-AUX 6CH INPUT

VCR 1 VCR2/DVR A AMP

+

TV VOL

TV MUTE

HALL

1

+

TV CH

TV INPUT

+

VOLUME

MUTE

JAZZ CLUB

2

ROCK

CONCERT

3

ENTER-

TAINMENT

4

5

/DTS

SUR.

9

LEVEL

TITLE

6

SELECT

0

SELECT

7

EX/ES

+10

PRESET/CH

8

STEREO

ENTER

EFFECT

SET MENU

MENU

A/B/C/D/E

+ –

TEST

RETURN

REC

DISPLAY

AUDIO

DISC SKIP

Front VIDEO AUX jack cap 75-ohm/300-ohm antenna adapter (U.K. model)

Indoor FM antenna

(U.S.A., Canada, China,

Korea and General models)

(Europe, U.K., Australia and

Singapore models)

Installing batteries in the remote control

Insert the batteries in the correct direction by aligning the

+ and – marks on the batteries with the polarity markings

(+ and –) inside the battery compartment.

1

3

2

Notes on batteries

• Change all of the batteries if you notice a decrease in the operating range of the remote control, that the indicator does not flash, or the light becoming dim.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

• If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

If the remote control is without batteries for more than

2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the manufacturer code that may have been cleared.

1 Press the part and slide off the battery compartment cover.

2 Insert the four supplied batteries (AAA, R03,

UM-4) according to the polarity markings on the inside of the battery compartment.

3 Slide the cover back on so that it snaps into place.

3

0102V630_1-8_EN(U) 3 12/27/01, 7:45 PM

CONTROLS AND FUNCTIONS

Front panel

1 2 3 4 5 6

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– +

TREBLE

– +

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

7

8 9 0 q w e r t

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM u i o p y

1

STANDBY/ON

Turns this unit on, or set it to the standby mode. When you turn this unit on, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound.

Standby mode

In this mode, this unit will consume a small amount of power in order to receive infrared-signals from the remote control.

2

Remote control sensor

Receives signals from the remote control.

3

Front panel display

Shows information about the operational status of this unit.

4

INPUT MODE

Sets the priority for the types of input signals (AUTO,

DTS, ANALOG) to receive when one component is connected to two or more input jacks. Priority cannot be set when 6CH INPUT is selected as the input source.

5

INPUT l / h

Selects the input source you want to listen to or watch.

6

VOLUME

Controls the output level of all audio channels.

This does not affect the OUT (REC) level.

7

6CH INPUT

Selects the audio source connected to the 6CH INPUT jacks. This audio takes priority over the source selected with INPUT l / h (or the input selector buttons on the remote control).

8 SILENT (PHONES jack)

Allows you enjoy DSP effect for private listening with headphones. When you connect headphones, no signals are output to the speakers or the OUTPUT jacks.

9 SPEAKERS A/B

Turns the set of main speakers connected to the A and/or

B terminals on or off.

4

0102V630_1-8_EN(U) 4 12/27/01, 7:45 PM

0

STEREO/EFFECT

Switches between normal stereo and DSP effect reproduction. When STEREO is selected, 2-channel signals are directed to the main left and right speakers without effect sounds and all Dolby Digital and DTS signals (except the LFE channel) are mixed down to the main left and right speakers.

q

PROGRAM l / h

Selects the DSP program.

w

PRESET/TUNING l / h

Selects preset station numbers 1 to 8 when the colon (:) appears in the front panel display.

Selects the tuning frequency when the colon (:) does not appear.

e

A/B/C/D/E

Selects preset station groups A to E.

r

BASS

Adjusts the low-frequency response for the main left and right channels.

Turn right to increase or turn left to decrease the lowfrequency response.

t

TREBLE

Adjusts the high-frequency response for the main left and right channels.

Turn right to increase or turn left to decrease the highfrequency response.

y

VIDEO AUX jacks

Inputs for audio and video signals from a portable external source (game console, etc.). Set the input source to V-AUX to enjoy source signals from these jacks.

When the VIDEO AUX jacks on the front panel are not used, you can attach the provided front VIDEO AUX jack cap as shown in the illustration. When the cap is not attached, be sure retain it carefully.

VID

EO

AU

X

S VID

EO

VID

EO

L

AU

DIO

R

OP

TICA

L

CONTROLS AND FUNCTIONS u

PRESET/TUNING (EDIT)

Switches the function of PRESET/TUNING l / h between selecting a preset station number and tuning (the colon (:) turns on or off).

This button is also used to exchange the assignment of two preset stations with each other.

i

TUNING MODE (AUTO/MAN’L MONO)

Switches the tuning mode between automatic and manual.

o

MEMORY (MAN’L/AUTO FM)

Stores the current station in the memory.

p

FM/AM

Switches the reception band between FM and AM.

0102V630_1-8_EN(U) 5 12/27/01, 7:45 PM

5

CONTROLS AND FUNCTIONS

Remote control

This section describes the remote control controls and their functions. Make sure that the AMP mode is selected before starting operation. See “REMOTE CONTROL

FEATURES” on pages 46 to 48.

1 8

2

3

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

MD/CD-R

STANDBY

TUNER

SYSTEM

POWER

SLEEP

DVD D-TV/CBL V-AUX 6CH INPUT

VCR 1 VCR2/DVR A AMP

9

0 q w e r

4

5

6

7

+

TV VOL

TV MUTE

+

TV CH

TV INPUT

+

VOLUME

MUTE

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MONO

MOVIE

6

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

LEVEL

TITLE

PRESET/CH

SELECT

STEREO

ENTER

EFFECT

SET MENU

MENU

A/B/C/D/E

+ –

TEST

RETURN DISPLAY

REC

AUDIO

DISC SKIP t y u i

1

Infrared window

Outputs infrared control signals. Aim this window at the component you want to operate.

2

CODE SET

Used when setting up the manufacturer code (see page

47).

3

Input selector buttons

Select the input source and set the remote control to operate the selected source component.

4

DSP program

Select DSP programs for the AMP position. Press a button repeatedly to select a DSP program within that group.

5

LEVEL

Selects the effect speaker channel to be adjusted.

6

Multi control section

Used when changing the setting and to implement the settings.

7

TEST

Outputs the test tone to adjust the speaker levels.

8

TRANSMIT indicator

Flashes while the remote control is sending signals.

9

STANDBY

Sets this unit in the standby mode.

0

SYSTEM POWER

Turns on the power of this unit.

q

SLEEP

Sets the sleep timer.

w

6CH INPUT

Selects the audio source connected to the 6CH INPUT jacks.

e

AMP

Sets the remote control to the AMP mode for controlling this unit.

r Å

Sets the remote control to operate other component (not necessarily connected to this unit) without changing this unit’s input source.

t

VOLUME +/–

Increases or decreases the volume level.

y

MUTE

Mutes the sound. Press again to restore the audio output to the previous volume level.

6

0102V630_1-8_EN(U) 6 12/27/01, 7:45 PM

u

STEREO/EFFECT

Switches between normal stereo and DSP effect reproduction. When STEREO is selected, 2-channel signals are directed to the main left and right speakers without effect sounds and all Dolby Digital and DTS signals (except the LFE channel) are mixed down to the main left and right speakers.

i

SET MENU

Selects the SET MENU mode.

CONTROLS AND FUNCTIONS

Using the remote control

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– +

TREBLE

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

– +

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

30

°

30

°

Approximately 6 m (20 feet)

VCR 1 VCR2/DVR

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.

Handling the remote control

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following types of conditions:

– high humidity or temperature such as near a heater, stove or bath;

– dusty places; or

– in places subject to extremely low temperatures.

0102V630_1-8_EN(U) 7 12/27/01, 7:45 PM

7

CONTROLS AND FUNCTIONS

Front panel display

1 2 3 4

MATRIX

DIGITAL

PRO LOGIC /

VCR2/DVR

VIRTUAL

SILENT

DSP

PCM

VCR 1 V-AUX D-TV/CBL DVD

DTS DOLBY DIGITAL

MOVIE THTR 12

PRO LOGIC

ENTERTAINMENT

MD/CD-R TUNER

STEREO AUTO

TUNED MEMORY

CD

MUTE

SLEEP

VOLUME dB mS

L C R

LFE RL RC RR

5 6 7 8 9 0 q w e r t

1 Processor indicators

Lights up when the t, g, VIRTUAL,

PRO LOGIC / or DSP are activated.

MATRIX lights up when the Dolby Digital EX decoder or the DTS-ES compatible decoder is activated.

2

Input source indicator

Shows the current input source with a cursor.

3

MUTE indicator

Flashes while the MUTE function is on.

4

VOLUME level indicator

Indicates the volume level.

5 v

indicator

Lights up when this unit is reproducing PCM (pulse code modulation) digital audio signals.

6

SILENT indicator

Lights up when headphones are connected while the digital sound field processor is on.

7

Headphones indicator

Lights up when headphones are connected.

8

DSP program indicators

The name of the selected DSP program lights up when the

ENTERTAINMENT, MOVIE THEATER 1, MOVIE

THEATER 2 or V/DTS SURROUND DSP program is selected.

9

Multi-information display

Shows the current DSP program name and other information when adjusting or changing settings.

0

STEREO indicator

Lights up when this unit is receiving a strong signal for an

FM stereo broadcast while the “AUTO” indicator is lit.

q TUNED indicator

Lights up when this unit is tuned to a station.

w MEMORY indicator

Flashes to show a station can be stored.

e AUTO indicator

Shows that this unit is in the automatic tuning mode.

r

SLEEP indicator

Lights up while the sleep timer is on.

t

Input channel indicator

Indicates the channel components of input signals being received.

8

0102V630_1-8_EN(U) 8 12/27/01, 7:45 PM

PREPARATION

SPEAKER SETUP

Speakers

This unit has been designed to provide the best soundfield quality with a 6-speaker system, using main left and right speakers, rear left and right speakers, a center speaker, and a rear center speaker. If you use different brands of speakers (with different tonal qualities) in your system, the tone of a moving human voice and other types of sound may not shift smoothly. We recommend that you use speakers from the same manufacturer or speakers with the same tonal quality.

The main speakers are used for the main source sound plus effect sounds. They will probably be the speakers from your present stereo system. The rear speakers are used for effect and surround sounds. The center speaker is for the center sounds (dialog, vocals, etc.). The rear center speaker supplements the rear (left and right) speakers and provides for more realistic front-to-back transitions.

The main speakers should be high-performance models and have enough power-handling capacity to accept the maximum output of your audio system. The other speakers do not have to be equal to the main speakers. For precise sound localization, however, it is ideal to use the models of equivalent performance with the main speakers.

Use of a subwoofer expands your

sound field

It is also possible to further expand your system with the addition of a subwoofer. The use of a subwoofer is effective not only for reinforcing bass frequencies from any or all channels, but also for reproducing the LFE

(low-frequency effect) channel with high fidelity when playing back Dolby Digital or DTS signals. The

YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass reproduction.

Speaker placement

Refer to the following diagram when you place the speakers.

Center speaker Main speaker (R)

Rear speaker (R)

Main speaker (L)

Subwoofer

1.8 m (6 feet)

Rear center speaker

Rear speaker (L)

Main speakers

Place the main left and right speakers an equal distance from the ideal listening position. The distance between each speaker and each side of the video monitor should also be the same.

Center speaker

Align the front face of the center speaker with the front face of your video monitor. Place the speaker as close to the monitor as possible (such as directly over or under the monitor) and centrally between the main speakers.

Rear speakers

Place these speakers behind your listening position, facing slightly inwards, nearly 1.8 m (6 feet) above the floor.

Rear center speaker

Place the rear center speaker in the center between the rear left and right speakers at the same height from the floor as the rear speakers.

Subwoofer

The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the main speakers. Turn it slightly toward the center of the room to reduce wall reflections.

Note

• If you do not use any of effect speakers (rear, center and/or rear center), change the settings of SPEAKER SET items at the

SET MENU to designate the signals to other terminals you connect speakers to.

CAUTION

Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the speakers away from the monitor.

9

0103V630_9-18_EN(U) 9 12/27/01, 7:45 PM

SPEAKER SETUP

Connecting the speakers

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

CAUTION

• Use speakers with the specified impedance shown on the rear panel of this unit.

• Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers.

If necessary, use the SET MENU to change the speaker mode settings according to the number and size of the speakers in your configuration after you finish connecting your speakers.

Speaker cables

10 mm (3/8”)

A speaker cord is actually a pair of insulated cables running side by side. One cable is colored or shaped differently, perhaps with a stripe, groove or ridge.

1 Remove approximately 10 mm (3/8”) of insulation from each of the speaker cables.

1 2

2 Twist the exposed wires of the cable together to prevent short circuits.

Connecting to the SPEAKERS terminals

Red: positive (+)

Black: negative (–)

2

1

3

1 Unscrew the knob.

2 Insert one bare wire into the hole in the side of each terminal.

3 Tighten the knob to secure the wire.

(U.S.A. model)

Banana plug

y

(U.S.A., Canada, Australia, China, Korea and General models)

• Banana plug connections are also possible. First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal.

(U.S.A. model)

MAIN SPEAKERS terminals

One or two speaker systems can be connected to these terminals. When using only one speaker system, it can be connected to either the MAIN A or the MAIN B terminals.

REAR SPEAKERS terminals

A rear speaker system can be connected to these terminals.

CENTER SPEAKER terminals

A center speaker can be connected to these terminals.

REAR CENTER SPEAKER terminals

A rear center speaker can be connected to these terminals.

10

0103V630_9-18_EN(U) 10 12/27/01, 7:45 PM

Main B speaker

Right Left

1

Main A speaker

Right Left

2

DIGITAL

INPUT

CD

COAXIAL

OPTICAL

D-TV/CBL

DVD

CD

OUT

(REC)

MD

/CD-R

IN

(PLAY)

MD/CD-R MAIN

MD/CD-R

OPTICAL

DIGITAL

OUTPUT

SURROUND

AUDIO

SUB

WOOFER CENTER

6CH INPUT

R

AUDIO

L

OUT

VCR 2

/VDR

IN

S VIDEO

VIDEO

VIDEO

OUT

VCR 1

IN

TUNER

AM

ANT

GND

D-TV

/CBL

75 UNBAL.

FM

ANT

DVD

COMPONENT VIDEO

P

R

/C

R

P

B

/C

B

Y

D-TV

/CBL

MONITOR

OUT

DVD

SUB

WOOFER

S VIDEO VIDEO

MONITOR OUT

MAIN

A OR B

A+B

CENTER

REAR

:4

:8

:6

REAR CENTER

:6

:6

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

OUTPUT

R

R

MAIN

R

MAIN

MAIN A OR B

A+B

CENTER

REAR CENTER

REAR

:

:

:

:

: 8

16

8

8

8

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

SET BEFORE POWER ON

IMPEDANCE SELECTOR

SPEAKERS

L

REAR CENTER

+ +

A

– –

B

+

L

L

R

OUTPUT

REAR

CENTER

REAR

(SURROUND)

CENTER

+

L

+

CENTER

R

REAR

(SURROUND)

L

3

Center speaker

SPEAKER SETUP

AC OUTLETS

4

Subwoofer system

5 6

Right Left

Rear speaker

7

Rear center speaker

2

3

1

4

6

7

5

The diagram shows the speaker layout in the listening room.

SUBWOOFER jack

When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack in accordance with your SPEAKER SET selections. The LFE (low-frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance with your

SPEAKER SET selections.

Notes

• The cut-off frequency of the SUBWOOFER jack is 90 Hz.

• If you do not use a subwoofer, designate the signals to the main left and right speakers by changing the setting of SPEAKER SET item “1E BASS” on the SET MENU to MAIN.

• Use the control on the subwoofer to adjust its volume level. It is also possible to adjust the volume level by using this unit’s remote control (see “ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS” on page 49).

11

0103V630_9-18_EN(U) 11 12/27/01, 7:45 PM

SPEAKER SETUP

IMPEDANCE SELECTOR switch

WARNING

Do not change setting of the IMPEDANCE SELECTOR switch when the power of this unit is on, this may damage the unit. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE

SELECTOR switch may not be fully slid to either position. If so, slide the switch all the way to either position when this unit is in the standby mode.

Select the switch position (left or right) according to the impedance of the speakers in your system. Be sure to move this switch only when this unit is in the standby mode.

IMPEDANCE

SELECTOR switch

MAIN

A OR B

A+B

CENTER

REAR

:4

:8

:6

REAR CENTER

:6

:6

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MAIN A OR B

A+B

CENTER

REAR CENTER

REAR :

:

:

:

:

8

16

8

8

8

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

SET BEFORE POWER ON

IMPEDANCE SELECTOR

R

MAIN

SPEAKERS

L

REAR CENTER

+ +

A

– –

CENTER

+

OMPONENT VIDEO

R /C R B /C B Y

MAIN

A OR B

A+B

CENTER

REAR

:4

:8

:6

:6

MIN. /SPEAKER

MIN. /SPEAKER

:6

REAR CENTER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

R

MAIN

R

B

+

L

L

R

OUTPUT

REAR

CENTER

REAR

(SURROUND)

MAIN A OR B

A+B :

:

CENTER

REAR CENTER

REAR

:

8

:

:

16

8

8

8

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

SET BEFORE POWER ON

IMPEDANCE SELECTOR

R

REAR

(SURROUND)

L

L

+

CENTER

(U.S.A. model)

Switch position

Speaker

Left

Right

Impedance level

Main

Center

Rear

Center

Rear

Main

Center

Rear

Center

Rear

If you use one set of main speakers, the impedance of each speaker must be 4

Ω or higher.

If you use two sets of main speakers, the impedance of each speaker must be 8

Ω or higher.

The impedance must be 6

Ω or higher.

The impedance must be 6

Ω or higher.

The impedance of each speaker must be 6

Ω or higher.

If you use one set of main speakers, the impedance of each speaker must be 8

Ω or higher.

If you use two sets of main speakers, the impedance of each speaker must be 16

Ω or higher.

[Canada model only]

The impedance of each speaker must be 8

Ω or higher.

The impedance must be 8

Ω or higher.

The impedance must be 8

Ω or higher.

The impedance of each speaker must be 8

Ω or higher.

12

0103V630_9-18_EN(U) 12 12/27/01, 7:45 PM

CONNECTIONS

Before connecting components

CAUTION

Do not connect this unit or other components to the mains power until all connections between the components have been completed.

• Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to

“–”. Some components require different connection methods and have different jack names. Refer to the operation instructions for each component to be connected to this unit.

• When you connect other YAMAHA audio components

(such as a tape deck, MD recorder and CD player or changer), connect them to the jack with the same number labels as !, #, $ etc. YAMAHA applies this labeling system to all its products.

• After you have completed all connections, check them again to make sure they are correct.

• The name of jack corresponds to input selector.

Connecting to digital jacks

This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables.

You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. To enjoy multi-channel sound track of DVD software, etc. with DSP effect, you need to make digital connection. All digital input jacks are acceptable for 96-kHz sampling digital signals.

Note

• The OPTICAL jacks on this unit conform to the EIA standard.

If you use a fiber optic cable that does not conform to this standard, this unit may not function properly.

DIGITAL INPUT jacks

(pages 13-16)

Audio component jacks

(page 16)

Antenna input terminals

(page 17)

Speaker terminals

(pages 10-11)

Video component jacks

(pages 14-15)

DIGITAL

INPUT

CD

COAXIAL

OPTICAL

D-TV/CBL

DVD

CD

OUT

(REC)

MD

/CD-R

IN

(PLAY)

MD/CD-R

MD/CD-R

OPTICAL

DIGITAL

OUTPUT

MAIN

SURROUND

R

AUDIO

L

SUB

WOOFER CENTER

6CH INPUT

R

R

AUDIO

L

OUT

VCR 2

/VDR

IN

VIDEO

S VIDEO VIDEO

OUT

VCR 1

IN

TUNER

AM

ANT

GND

D-TV

/CBL

DVD

COMPONENT VIDEO

P

R

/C

R

/C

B

75 UNBAL.

FM

ANT

D-TV

/CBL

MONITOR

OUT

Y

DVD

SUB

WOOFER

S VIDEO VIDEO

MONITOR OUT

OUTPUT

R

MAIN

R

MAIN

SPEAKERS

L

REAR CENTER

+ +

A

– –

CENTER

+

B

+

L

L

R

OUTPUT

REAR

CENTER

REAR

(SURROUND)

L

+

CENTER

R

REAR

(SURROUND)

L

6CH INPUT jacks

(page 18)

DIGITAL OUTPUT jack

(page 16)

SUBWOOFER

OUTPUT jack

(page 11)

OUTPUT jacks

(page 18)

AC OUTLETS

(page 19)

13

0103V630_9-18_EN(U) 13 12/27/01, 7:45 PM

CONNECTIONS

Connecting video components

Refer to the connection examples on the next page.

Types of video jacks

There are three types of video jacks as follows:

S VIDEO VIDEO

COMPONENT VIDEO

P

R

/C

R

P

B

/C

B

Y

2 1 3

1

VIDEO jack

Conventional composite video signal.

2

S VIDEO jack

Transmits color and luminance separately and achives high-quality color reproduction.

3

COMPONENT VIDEO jacks

Transmit color difference (P

B

/C

B

, P

R

/C

R

) and luminance separately and provide the best quality picture.

• Each type of video jack works independently. Signals input through the composite video, S-video and component jacks are only output through the corresponding composite video, S-video, and component jacks.

• Use a commercially available cable specified for connecting each type of jacks.

• The description of the component video jacks may differ depending on the component (e.g. Y, C

B

, C

R

/Y,

P

B

, P

R

/Y, B-Y, R-Y etc.). When using these jacks, refer also to the operation instructions for the component being connected.

Connecting a video monitor

Connect the video input jack on your video monitor to the

MONITOR OUT VIDEO jack.

Note

• If you connect this unit with a source component using S-video

(or Component video) jacks, you also need to connect your video monitor using S-video (or Component video) jacks.

Connecting a DVD player/digital

TV/cable TV

Connect the optical digital audio signal output jack on your component to the DIGITAL INPUT jack and connect the video signal output jack on the component to the VIDEO jack on this unit.

Then connect AUDIO jacks on your component to the

AUDIO jacks on this unit.

y

• If your video component has an S-video output or component video output, connect the S-video signal output jack on the component to the S VIDEO jack or connect the component video signal output jacks on the component to the

COMPONENT VIDEO jacks.

• The AUDIO jacks are available for a video component which does not have optical digital output jack. However, multichannel reproduction cannot be obtained with audio signals input from AUDIO jacks.

Connecting a game console or

camcorder

Connect the optical digital audio signal output jack on your video component to the OPTICAL jack on the front panel and connect video signal output jack on the component to the VIDEO jack on the front panel.

y

• If your video component has an S-video output, connect the Svideo signal output jack on the component to the S VIDEO jack.

• The AUDIO jacks are available for a video component such as a camcorder which does not have optical digital output jack.

Connecting a VCR or DVR (digital

video recorder)

Connect the audio signal input jacks on your video component to the AUDIO OUT jacks and connect the video signal input jack on the video component to the

VIDEO OUT jack on this unit for picture recording.

Connect the audio signal output jacks on your component to the AUDIO IN jacks and connect the video signal output jack on the component to the VIDEO IN jack on this unit to play a source from your recording component.

Second VCR or digital video recorder can be connected using VCR 2/DVR jacks.

y

• If your video component has an S-video input, connect the Svideo signal input jack on the component to the S VIDEO OUT jack.

• If your video component has an S-video output, connect the Svideo signal output jack on the component to the S VIDEO IN jack.

Notes

• Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is off, this unit may distort the sound from other components.

• S-video and component video signals pass independently through this unit’s video circuit. Make sure to connect this unit to both a source component and a recording component using the video jacks of the same system.

14

0103V630_9-18_EN(U) 14 12/27/01, 7:45 PM

VCR 1

AUDIO

OUTPUT

L R

AUDIO

INPUT

L R V

VIDEO

INPUT

V

VIDEO

OUTPUT

O

OPTICAL

OUTPUT

TV/digital TV/ cable TV

V

VIDEO

OUTPUT

CONNECTIONS

DIGITAL

INPUT

CD

COAXIAL

OPTICAL

D-TV/CBL

DVD

CD

OUT

(REC)

MD

/CD-R

IN

(PLAY)

R

MD/CD-R MAIN

MD/CD-R

OPTICAL

DIGITAL

OUTPUT

SURROUND

AUDIO

L

SUB

WOOFER CENTER

6CH INPUT

R

AUDIO

L

OUT

VCR 2

/VDR

IN

VIDEO

S VIDEO VIDEO

OUT

VCR 1

IN

TUNER

AM

ANT

GND

D-TV

/CBL

DVD

COMPONENT VIDEO

P R /C R P B /C B

75 UNBAL.

FM

ANT

D-TV

/CBL

MONITOR

OUT

Y

DVD

SUB

WOOFER

S VIDEO VIDEO

MONITOR OUT

MAIN

A OR B :4

:8 A+B

CENTER

REAR

:6

REAR CENTER

:6

:6

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

MIN. /SPEAKER

OUTPUT

O

OPTICAL

OUTPUT

L R

AUDIO

OUTPUT

V

VIDEO

OUTPUT

DVD player

V

VIDEO

INPUT

Video monitor

INPUT M0DE

INPUT VOLUME

6CH INPUT

A/B/C/D/E

BASS

– +

TREBLE

– +

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

0103V630_9-18_EN(U)

Game console or camcorder

VIDEO

OUTPUT

V

O

OPTICAL

OUTPUT

15 indicates signal direction

L indicates left analog cables

R indicates right analog cables

O indicates optical cables

V indicates video cables

15

12/27/01, 7:45 PM

CONNECTIONS

Connecting audio components

Connecting a CD player

Connect the coaxial digital output jack on your CD player to the DIGITAL INPUT CD jack.

y

• The AUDIO jacks are available for a CD player which does not have coaxial digital output jack.

Connecting a CD recorder or MD

recorder

Connect the optical digital signal input jack on your CD recorder or MD recorder to the DIGITAL OUTPUT MD/

CD-R jack for digital recording.

Connect the optical digital output jack on your CD recorder or MD recorder to the DIGITAL INPUT MD/

CD-R jack to play a source from your recording component.

y

• The AUDIO jacks are available for an CD recorder or MD recorder which does not have optical digital input or output jack.

Notes

• Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is off, this unit may distort the sound from other components.

• DIGITAL OUTPUT jack and analog OUT (REC) jacks are independent. Only digital signals are output from DIGITAL

OUTPUT jack and analog signals from OUT (REC) jacks.

COAXIAL

OUTPUT

C

CD player

OPTICAL

OUTPUT

O

CD recorder or

MD recorder

OPTICAL

INPUT

O

DIGITAL

INPUT

CD

COAXIAL

OPTICAL

D-TV/CBL

DVD

CD

OUT

(REC)

MD

/CD-R

IN

(PLAY)

R

MD/CD-R MAIN

SURROUND

MD/CD-R

OPTICAL

DIGITAL

OUTPUT

AUDIO

L

SUB

WOOFER CENTER

6CH INPUT

R

AUDIO

L

OUT

VCR 2

/VDR

IN

VIDEO

S VIDEO VIDEO

SUB

WOOFER

OUT

VCR 1

IN

D-TV

/CBL

DVD

S VIDEO VIDEO

MONITOR OUT

OUTPUT indicates signal direction

C indicates coaxial cables

O indicates optical cables

16

0103V630_9-18_EN(U) 16 12/27/01, 7:45 PM

CONNECTIONS

Connecting the antennas

Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength.

Connect each antenna correctly to the designated terminals.

AM loop antenna

(included)

Indoor FM antenna

(included)

Connecting the AM loop antenna

1 Set up the AM loop antenna, then connect it.

EO

VIDEO

TUNER

AM

ANT

GND

DVD

75 UNBAL.

FM

ANT

D-TV

/CBL

MONIT

OUT

VIDEO

R OUT

FREQUENCY

STEP

Ground (GND terminal)

For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

2 Press and hold the tab to insert the AM loop

3 antenna lead wires into the AM ANT and

GND terminals.

Orient the AM loop antenna for the best reception.

75-ohm/300-ohm antenna adapter (U.K. model)

1 2

11 (7/16)

8 (5/16)

6 (1/14)

Unit: mm (inch)

Open the cover of the included 75-ohm/300-ohm antenna adapter.

Cut the external sleeve of the 75-ohm coaxial cable and prepare it for connection.

3

Lead wire

Cut the lead wire and remove it.

4

Clamp with pliers.

Clamp with pliers.

Insert the wire into the slot.

Insert the cable wire into the slot, and clamp it with pliers.

5

Snap the cover into place.

Notes

• The AM loop antenna should be placed away from this unit.

• The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas.

FREQUENCY STEP switch (China and General models)

Because the interstation frequency spacing

FM/AM

50kHz/9kHz

100kHz/10kHz differs in different areas, set the

FREQUENCY STEP switch (located on

FREQUENCY

STEP the rear panel) according to the frequency spacing in your area.

North, Central and South America:

100 kHz/10 kHz

Other area: 50 kHz/9 kHz

Before setting this switch, disconnect the

AC power plug of this unit from the AC outlet.

17

0103V630_9-18_EN(U) 17 12/27/01, 7:45 PM

CONNECTIONS

Connecting an external amplifier

If you want to increase the power output to the speakers, or want to use another amplifier, connect an external amplifier to the OUTPUT jacks as follows.

Note

• When RCA pin plugs are connected to the OUTPUT jacks for output to an external amplifier, signals are output from the

SPEAKERS terminals as well.

1 2 3 4

SUB

WOOFER MAIN

R L

OUTPUT

REAR

CENTER

CENTER

OUTPUT

R

REAR

(SURROUND)

L

5

1

SUBWOOFER jack

When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing

Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack in accordance with your SPEAKER

SET selections. The LFE (low-frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed to this jack in accordance with your SPEAKER

SET selections.

Notes

• The cut-off frequency of the SUBWOOFER jack is 90 Hz.

• If you do not use a subwoofer, designate the signals to the main left and right speakers by changing the settings of SPEAKER

SET item “1E BASS” on the SET MENU.

• Use the control on the subwoofer to adjust its volume level. It is also possible to adjust the volume level by using this unit’s remote control (see “ADJUSTING THE LEVEL OF THE

EFFECT SPEAKERS” on page 49).

2

MAIN jacks

Main channel line output jacks.

Note

• The signals output through these jacks are affected by the

BASS and TREBLE settings.

3

REAR CENTER jack

Rear center channel line output jack.

4

CENTER jack

Center channel line output jack.

5

REAR (SURROUND) jacks

Rear channel line output jacks.

Connecting an external decoder

This unit is equipped with 6 additional input jacks (MAIN left and right, CENTER, SURROUND left and right, and

SUBWOOFER) for discrete multi-channel input from an external decoder, sound processor, or pre-amplifier.

Connect the output jacks on your external decoder to the

6CH INPUT jacks. Be sure to match the left and right outputs to the left and right input jacks for the main and surround channels.

Notes

• When you select 6CH INPUT as the input source, this unit automatically turns off the digital sound field processor, and you cannot listen to DSP programs.

• When you select 6CH INPUT as the input source, settings of

“1 SPEAKER SET” on the SET MENU do not apply (except for “1F MAIN Lv”).

18

0103V630_9-18_EN(U) 18 12/27/01, 7:45 PM

Connecting the power supply cords

VOLTAGE SELECTOR

VOLTAGE

SELECTOR

CONNECTIONS

Turning on the power

When all connections are complete, turn on the power of this unit.

1

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– + –

TREBLE

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

+

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

AC OUTLETS

SWITCHED

120V 60Hz

100W MAX. TOTAL

(General model)

Connecting the AC power cord

Plug in this unit to the wall outlet.

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

MD/CD-R

STANDBY

TUNER

SYSTEM

POWER

SLEEP

DVD D-TV/CBL V-AUX 6CH INPUT

VCR 1 VCR1/DVR A AMP

+

TV VOL

TV MUTE

HALL

+

TV CH

TV INPUT

+

VOLUME

MUTE

JAZZ CLUB

ROCK

CONCERT

ENTER-

TAINMENT

1

1 Press STANDBY/ON (SYSTEM POWER on the remote control) to turn on the power of this unit.

SYSTEM

POWER

STANDBY

/ON or

AC OUTLETS (SWITCHED)

U.S.A., Canada, China, Europe, Singapore and

General models .............................................. 2 OUTLETS

U.K. and Australia model ................................ 1 OUTLET

Use these outlets to connect the power cords from your components to this unit. The power to the AC OUTLETS is controlled by this unit’s STANDBY/ON (or SYSTEM

POWER and STANDBY). These outlets will supply power to any source component connected to this unit whenever this unit is turned on. The maximum power

(total power consumption of components) that can be connected to the AC OUTLETS varies depending on the area which it was purchasing.

China and General models ......................................... 50 W

Other models ........................................................... 100 W

Front panel Remote control

The level of the main volume, and then the current

DSP program name appear on the front panel display.

2 Turn on the video monitor connected to this unit.

VOLTAGE SELECTOR

(China and General models)

The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110/120/

220/240 V AC, 50/60 Hz.

0104V630_19-22_EN(U) 19 12/27/01, 7:45 PM

19

SPEAKER MODE SETTINGS

This unit has 6 SPEAKER SET items on the SET MENU that you must set according to the number of speakers in your configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings as well as other possible settings.

If the initial settings shown in the following table are not appropriate for your speaker configuration, see “1 SPEAKER SET” on pages 41-43 to change the settings.

Summary of SPEAKER SET items 1A through 1F

Item Description

1A CENTER

1B MAIN

1C REAR LR

1D REAR CT

1E BASS

1F MAIN Lv

Sets center speaker availability and size.

Sets main speaker size.

Sets rear L/R speakers availability and size.

Sets rear center speaker availability and size.

Sets the speaker(s) to be used to output low bass signals.

Sets the main speaker level.

Possible settings (default setting indicated in bold)

LRG/SML/NON

LARGE/SMALL

LRG/SML/NON

LRG/SML/NON

SWFR/MAIN/BOTH

Nrm (Normal)/–10 dB

20

0104V630_19-22_EN(U) 20 12/27/01, 7:45 PM

ADJUSTING SPEAKER OUTPUT LEVELS

This section explains how to adjust speaker output levels using the test tone generator. When this adjustment is complete, the output level heard at the listening position should be the same from each speaker. This is important for best performance of the digital sound field processor, and the various decoders (Dolby Digital, Dolby Pro

Logic, Dolby Pro Logic and DTS).

Note

• Since this unit cannot enter the test mode while headphones are connected to this unit, be sure to unplug the headphones from the PHONES jack when using the test tone.

Before you begin

Using the test tone

Use the test tone to balance the output levels of the speakers. The adjustment of each speaker output level should be made at your listening position using the remote control.

3

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– +

TREBLE

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

VIDEO AUX

– +

S VIDEO VIDEO L AUDIO R OPTICAL

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– + –

TREBLE

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

+

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

1

1

Press SPEAKERS A or B to select the main speakers to be used.

If you are using two sets of the main speakers, press both A and B.

2

A

SPEAKERS

B

2 Set the BASS and TREBLE controls on the front panel to the center position.

BASS TREBLE

4

2,5

VCR 1 VCR2/DVR A AMP

+

TV VOL

TV MUTE

HALL

1

+

TV CH

TV INPUT

+

VOLUME

MUTE

JAZZ CLUB

2

ROCK

CONCERT

3

ENTER-

TAINMENT

4

5

/DTS

SUR.

9

LEVEL

TITLE

6

SELECT

0

PRESET/CH

SELECT

7

EX/ES

+10

8

STEREO

ENTER

EFFECT

SET MENU

MENU

A/B/C/D/E

+ –

TEST

RETURN DISPLAY

1

3

1 Press AMP.

AMP

2 Press TEST to output the test tone.

TEST

RETURN

– + – +

3 Adjust the volume of this unit so you can hear the test tone.

The test tone is heard (in order) from the main left speaker, center speaker, main right speaker, rear right speaker, rear center, rear left speaker, and the subwoofer. The tone is produced for 2.5 seconds from each speaker.

VOLUME

+ or

VOLUME

Front panel Remote control

21

0104V630_19-22_EN(U) 21 12/27/01, 7:46 PM

ADJUSTING SPEAKER OUTPUT LEVELS

LEFT RIGHT

* SUBWOOFER

CENTER

LEFT SURROUND RIGHT SURROUND

REAR CENTER

* Subwoofer test tone is output after the rear left speaker (LEFT SURROUND).

The front panel display shows which speaker is outputting the test tone.

Note

• If the test tone cannot be heard, turn down the volume, set this unit to standby mode and check the speaker connections.

4 Adjust the level of the

effect speakers using j / i so that it matches the level of the main speakers.

While adjusting, the test tone is heard from the selected speaker.

PRESET/CH

SELECT

Note

• To adjust the level of the main speakers, use VOLUME knob

(or VOLUME +/– on the remote control).

5 When adjustment is complete, press TEST to stop the test tone.

TEST

RETURN

+

Notes

• If “1A CENTER” on the SET MENU is set to NON, the center channel sound is automatically output from the main left and right speakers.

• If “1C REAR LR” on the SET MENU is set to NON, the output level of the rear left, right and center speakers cannot be adjusted in step 4. The test tone will be circulated skipping the rear left and right speakers and the rear center speaker.

• If “1D REAR CT” on the SET MENU is set to NON, the output level of the rear center speaker cannot be adjusted in step 4. The test tone will be circulated skipping the rear center speaker.

• If “1E BASS” on the SET MENU is set to MAIN, the test tone will be circulated skipping the subwoofer.

y

• It is not necessary to readjust the speaker levels once they are set (as long as you do not change the speakers). You can enjoy listening to or watching the input source at the desired volume simply by adjusting the VOLUME knob (or VOLUME +/– on the remote control).

• If the output level of the effect speakers (center, rear left, rear right, and rear center) cannot be increased enough to match the level of the main speakers, set “1F MAIN Lv” on SET MENU to –10 dB (see page 43). This setting decreases the main speaker output level to about one-third of the normal level.

After you have set “1F MAIN Lv” on the SET MENU to

–10 dB, adjust the levels for the center and rear speakers again.

22

0104V630_19-22_EN(U) 22 12/27/01, 7:46 PM

1

BASIC PLAYBACK

4 6 4

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– +

TREBLE

– +

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

4 Press INPUT l / h repeatedly (one of the input selector buttons on the remote control) to select the input source.

The selected input source name and input mode appear on the front panel display for a few seconds.

CD MD/CD-R TUNER

INPUT

DVD D-TV/CBL V-AUX or

VCR 1 VCR2/DVR

3 7 6

4

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

STANDBY

MD/CD-R TUNER

SYSTEM

POWER

SLEEP

DVD D-TV/CBL V-AUX

6CH INPUT

VCR 1 VCR2/DVR A AMP

+

TV VOL

TV MUTE

+

TV CH

TV INPUT

+

VOLUME

MUTE

HALL

1

TV

SPORTS

5

JAZZ CLUB

2

MONO

MOVIE

6

3 4

MOVIE

THEATER 1

7

MOVIE

THEATER 2

8

9

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

7

1

4

6

1 Press STANDBY/ON (SYSTEM POWER on the remote control) to turn on the power.

SYSTEM

POWER

STANDBY

/ON or

Front panel Remote control

2 Turn on the video monitor connected to this unit.

3 Press SPEAKERS A or B to select the main speakers to be used.

If you are using two sets of main speakers, press both A and B.

A

SPEAKERS

B

Front panel Remote control

VCR2/DVR VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER CD

VOLUME

L R

Selected input source

To select the audio source connected to the 6CH

INPUT jacks

(When combining with a video source)

• You need to select the input to which the video source component is connected before selecting audio source.

Press 6CH INPUT until “6CH INPUT” appears on the front panel display.

6CH INPUT

6CH INPUT or

Front panel Remote control

Note

• If “6CH INPUT” is shown on the front panel display, no other source can be played. To select another input source, first press

6CH INPUT to turn off “6CH INPUT” from the front panel display.

12/27/01, 7:46 PM

23

0105V630_23-28_EN(U) 23

BASIC PLAYBACK

5 Start playback or select a broadcast station on the source component.

Refer to the operation instructions for the component.

6 Adjust the volume to the desired level.

The volume level is displayed digitally.

Example: –70 dB

Control range: VOLUME MUTE (minimum) to

0 dB (maximum)

The volume level indicator also shows the current volume level as a bar graph.

If desired, use BASS and TREBLE. These controls only effect the sound from the main speakers.

VOLUME or

+

VOLUME

BGV (background video) function

The BGV function allows you to enjoy video images from a video source together with sounds from an audio source. For example, you can enjoy listening to classical music while having beautiful scenery from a video source on the video monitor.

Select a source from the video group, then select a source from the audio group using the input selector buttons on the remote control. BGV selections cannot be made with

INPUT l / h on the front panel.

CD MD/CD-R TUNER

DVD D-TV/CBL V-AUX

VCR 1 VCR2/DVR

BASS TREBLE

– + –

Front panel

+

Remote control

Notes

• If you increase or decrease the high-frequency or the lowfrequency sound to an extreme level, the tonal quality from the center and rear speakers may not match that of the main left and right speakers.

• If you have connected a recording component to the VCR 1

OUT, VCR 2/DVR OUT, or MD/CD-R OUT jacks, and you notice distortion or low volume during playback of other components, try turning the recording component on.

7 Select a DSP program if desired.

Use PROGRAM l / h (DSP program buttons on the remote control) to select a DSP program. See pages 29 to 33 for details about DSP programs.

When using the remote control, press AMP before selecting a DSP program.

PROGRAM

Front panel or

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MONO

MOVIE

6

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

Remote control

To mute the sound

1 Press MUTE on the remote control.

To resume the audio output, press MUTE again.

MUTE

y

• You can also cancel mute by pressing VOLUME +/–, etc.

• During muting, the “MUTE” indicator flashes on the front panel display.

When you have finished using

this unit

1 Press STANDBY/ON (STANDBY on the remote control) to set this unit in the standby mode.

STANDBY

STANDBY

/ON or

Front panel Remote control

24

0105V630_23-28_EN(U) 24 12/27/01, 7:46 PM

Input modes and indications

This unit comes with a variety input jacks. You can select the type of input signals you desire.

Each time you turn on the power of this unit, the input mode is set according to “8 INPUT MODE” setting on the SET MENU (see page 45 for details).

1 Press INPUT MODE (the input selector button that you have pressed to select the input source on the remote control) repeatedly until the desired input mode is shown on the front panel display.

INPUT MODE

Front panel or

CD MD/CD-R TUNER

DVD D-TV/CBL V-AUX

VCR 1 VCR2/DVR

Remote control

VCR2/DVR VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER CD

VOLUME

D V D A U T O

L R

Input mode

AUTO:

DTS:

In this mode, the input signal is selected automatically as follows:

1) Digital signal

2) Analog signal

In this mode, only the digital input signal encoded with DTS is selected, even if another signal is input at the same time.

ANALOG: In this mode, only the analog input signal is selected, even if a digital signal is input at the same time.

Notes

• When AUTO is selected, this unit automatically determines the type of signal. If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate setting.

• When playing a disc encoded with Dolby Digital or DTS on some LD or DVD players, the sound output delays for a moment when playback resumes after a search because the digital signal is selected again.

• When playing a LD source that has not been digitally recorded, the sound may not be output for some LD players. In this case, set the input mode to ANALOG.

BASIC PLAYBACK

Notes on 96-kHz sampling digital

signals

The digital input jacks of this unit can handle 96-kHz sampling digital signals. Note the following when 96-kHz sampling digital signal is input to this unit:

– DSP programs cannot be selected.

– Sound will be output as 2-channel stereo from only the main left and right speakers. (There may be sound output from the subwoofer depending on the

SPEAKER MODE settings on the SET MENU.)

Therefore, the level of the effect speakers cannot be adjusted while listening to such a source.

Notes on playing DTS-CD/LDs

• If the digital output data of the player has been processed in any way, you may not be able to perform

DTS decoding even if you make a digital connection between this unit and the player.

• If you play a source encoded with a DTS signal and set the input mode to ANALOG, this unit may reproduce the noise of an unprocessed DTS signal. In this case, connect the source to a digital input jack and set the input mode to AUTO or DTS.

• If you switch the input mode to ANALOG while playing a source encoded with a DTS signal, this unit reproduces no sound.

• If you play a source encoded with a DTS signal with the input mode set to AUTO;

– This unit automatically switches to the DTSdecoding mode (The “t” indicator lights up) after having detected the DTS signal. When playback of the DTS source is completed, the “t” indicator may flash. While this indicator is flashing, only DTS source can be played. If you want to play a normal

PCM source soon, set the input mode back to AUTO.

– When the input mode is set to AUTO and a search or skip operation is performed during playback of a

DTS source, the “t” indicator may flash. If this status continues for longer than 30 seconds, this unit will automatically switch from “DTS-decoding” mode to PCM digital signal input mode. The “t” indicator will turn off.

0105V630_23-28_EN(U) 25 12/27/01, 7:46 PM

25

BASIC PLAYBACK

Selecting a sound field program

You can enhance your listening experience by selecting a

DSP program. For details about each program, see pages

29 to 33.

STANDBY

/ON

SILENT

PHONES

INPUT VOLUME

INPUT M0DE

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– +

TREBLE

– +

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

6CH INPUT

3 After selecting the desired program, press the same button repeatedly to select the desired sub-program if available.

Example: Pressing MOVIE THEATER 1 repeatedly switches the sub-program between

“Sci-Fi” and “Spectacle”.

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MONO

MOVIE

6

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

PROGRAM l / h

1 Press AMP.

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

MD/CD-R

STANDBY

TUNER SLEEP

DVD

D-TV/CBL

V-AUX 6CH INPUT

VCR 1 VCR2/DVR

A

AMP 1

+

TV VOL

TV MUTE

+

TV CH

TV INPUT

+

VOLUME

MUTE

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

MONO

MOVIE

6

3

ENTER-

TAINMENT

4

MOVIE

THEATER 1

7

MOVIE

THEATER 2

8

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

2,3

AMP

2 Press one of the DSP program buttons on the remote control to select the desired program.

The name of the selected program appears on the front panel display.

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MONO

MOVIE

6

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

Program name

DSP

PRO LOGIC /

VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER VCR2/DVR

MOVIE THTR 1

D G T L S p e c t a c l e

CD

VOLUME

LFE

L

RL

C R

RR

Sub-program name

Program name

DSP

PRO LOGIC /

VCR 1 V-AUX D-TV/CBL MD/CD-R TUNER VCR2/DVR DVD

MOVIE THTR 1

D G T L z S c i - F i

CD

VOLUME

LFE

L C R

RL RR

Sub-program name

Notes

• There are 9 programs with sub-programs available with this unit. However, the selection depends on the input signal format and not all sub-programs can be used with all input signal formats.

• The digital sound field processor cannot be used when a source connected to the 6CH INPUT jacks of this unit is selected or when 96-kHz sampling digital signals are input to this unit.

• The acoustics of your listening room affect the DSP program.

Minimize the sound reflections in your room to maximize the effect created by the program.

• When you select an input source, this unit automatically selects the last DSP program used with that source.

• When you set this unit in the standby mode, the current source and DSP program are memorized and are automatically selected when you turn on the power again.

• If a Dolby Digital or DTS signal is input when the input mode is set to AUTO, the DSP program (No. 7–9) automatically switches to the appropriate decoding program.

• When a monaural source is being played with PRO LOGIC/

Normal or PRO LOGIC/Enhanced, or PRO LOGIC Movie, no sound will be heard from the main speakers and the rear speakers. Sound can only be heard from the center speaker. (If

“1A CENTER” on the SET MENU is set to NON, the center channel sound is output from the main speakers.)

y

• You can also select DSP program by pressing PROGRAM l

/ h on the front panel.

• Select a program based on your listening preference. Program names are just for reference.

26

0105V630_23-28_EN(U) 26 12/27/01, 7:46 PM

Selecting PRO LOGIC

You can enjoy the 2-channel sources decoded into five or six discrete channels by selecting PRO LOGIC in program No. 9.

INPUT VOLUME

6CH INPUT INPUT M0DE

NATURAL SOUND AV RECEIVER

STANDBY

/ON

SILENT

PHONES

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– + –

TREBLE

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

+

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

PROGRAM l / h

3,4,5

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

STANDBY

MD/CD-R TUNER

SYSTEM

POWER

SLEEP

DVD D-TV/CBL V-AUX 6CH INPUT

VCR 1 VCR2/DVR A AMP 2

+

TV VOL

TV MUTE

+

TV CH

TV INPUT

+

VOLUME

MUTE

HALL

1

TV

SPORTS

5

JAZZ CLUB

2

ROCK

CONCERT

3

MONO

MOVIE

6

MOVIE

THEATER 1

7

4

8

9

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

BASIC PLAYBACK

4 Press SELECT repeatedly to select the decoder; PRO LOGIC or PRO LOGIC .

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

MONO

MOVIE

6

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

5 After selecting on the decoder (PRO LOGIC

), select the mode appropriate for the

source by pressing q/DTS SUR.

The selection switches as follow;

PRO LOGIC Movie ↔ PRO LOGIC Music

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MONO

MOVIE

6

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

y

• You can select PRO LOGIC, PRO LOGIC Movie, and PRO

LOGIC Music by pressing PROGRAM l / h on the front panel repeatedly.

1 Select a 2-channel source and start playback on the source component.

2 Press AMP.

AMP

3 Press q/DTS SUR.

The previously selected sub program appears on the front panel display.

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

MONO

MOVIE

6

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

Remote control

PRO LOGIC /

DSP

VCR2/DVR VCR 1 V-AUX D-TV/CBL DVD

PRO LOGIC

MD/CD-R TUNER

P R O L O G I C

CD

VOLUME

L R

0105V630_23-28_EN(U) 27 12/27/01, 7:46 PM

27

BASIC PLAYBACK

Playing Dolby Digital Surround

EX or DTS ES software

Press EX/ES to turn on the Dolby Digital EX or DTS-ES compatible decoder.

The MATRIX indicator lights up.

EX/ES

+10

DSP

VCR 1 V-AUX D-TV/CBL DVD MD/CD-R

MATRIX

DIGITAL

VCR2/DVR

MOVIE THTR 1

S p e c t a c l e E X

TUNER

The display changes AUTO → Matrix6.1 → OFF each time the EX/ES button is pressed.

AUTO: This mode automatically switches Dolby

Digital EX and DTS-ES compatible depending on the signal. Rear center speaker does not work for 5.1 channel sources.

Matrix6.1: This setting produces 6-channel playback of the input source using the Dolby Digital EX or DTS-ES compatible decoder. The rear

OFF: center speaker can be used when playing a

5.1-channel source.

Rear center speaker does not work in this setting. (Except for when the DSP program

“6ch” is selected.)

Notes

• No sound will be output from the rear center speaker if you have set “1C REAR LR” or “1D REAR CT” on the SET

MENU to NON.

• The setting becomes AUTO once this unit turns into standby mode.

• Some Dolby Digital Surround EX or DTS ES software may not contain the signal that is necessary for this unit to switch to the

Dolby Digital EX or DTS-ES compatible decoding mode. To turn on the decoder when playing such a source, select

“Matrix6.1”.

Virtual CINEMA DSP

With Virtual CINEMA DSP, you can enjoy all DSP programs without rear speakers. It creates virtual speakers to reproduce a natural sound field.

You can listen to virtual CINEMA DSP by setting “1C

REAR LR” in the SET MENU to NON. Sound field processing changes to VIRTUAL CINEMA DSP automatically.

Note

• This unit is not set in the virtual CINEMA DSP mode even if

“1C REAR LR” is set to NON in the following cases:

– when the 6ch Stereo, DOLBY DIGITAL Normal, Pro Logic

Normal, Pro Logic , or DTS Normal program is selected;

– when the sound effect is turned off;

– when 6CH INPUT is selected as the input source;

– when 96-kHz sampling digital signals are input to this unit;

– when using the test tone; or

– when connecting the headphones.

SILENT CINEMA DSP

You can enjoy a powerful sound field similar to what you could expert from actual speakers with SILENT

CINEMA DSP. You can listen to SILENT CINEMA DSP by connecting your headphones to the PHONES jack while the digital sound field processor is on. Enjoy all the

DSP program using the headphones. The “SILENT” indicator lights up on the front panel display. (When sound effects are off, you listen to the source with normal stereo reproduction.)

Notes

• This feature is not available when 6CH INPUT is selected or

96-kHz sampling digital signals are input to this unit.

• The sound of LFE channel will be mixed and output from the headphone.

Normal stereo reproduction

1 Press STEREO to turn off the sound effect for normal stereo reproduction.

Press STEREO again to turn the sound effect back on.

STEREO

STEREO or ENTER

EFFECT

EFFECT

Front panel Remote control

Notes

• If you turn off the sound effects, no sound is output from the center speaker, rear speakers, or rear center speaker.

• If you turn off the sound effects while a Dolby Digital or DTS signal is being output, the dynamic range of the signal is automatically compressed and the sounds of the center and rear speaker channels are mixed and output from the main speakers.

• The volume may be greatly reduced when you turn off the sound effects or if you set “4 D. RANGE” on the SET MENU to MIN. In this case turn on the sound effect.

• The sound of LFE channel will be directed to the main left and right or the subwoofer (or both) channels depending on the setting of “1E BASS” on the SET MENU.

y

During stereo reproduction, you can display information such as the type, format and sampling frequency of the signal input from the components connected to this unit.

(While playing a source)

1 Press AMP.

2 Press d to display the information about the input signal.

PRESET/CH

SELECT

+

28

0105V630_23-28_EN(U) 28 12/29/01, 9:38 PM

DIGITAL SOUND FIELD PROCESSING (DSP)

Understanding sound fields

A sound field is defined as the “characteristic sound reflections of a particular space.” In concert halls and other music venues, we hear early reflections and reverberations as well as the direct sound produced by the artist(s). The variations in the early reflections and other reverberations among the different music venues is what gives each venue its special and recognizable sound quality.

YAMAHA sent teams of sound engineers all around the world to measure the sound reflections of famous concert halls and music venues, and collect detailed sound field information such as the direction, strength, range, and delay time of those reflections. Then we stored this enormous amount of data in the ROM chips of this unit.

Recreating a sound field

Recreating the sound field of a concert hall or an opera house requires localizing the virtual sound sources in your listening room. The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data.

The processor controls the strength and delay time of the signals output from the four effect speakers to localize the virtual sound sources and fully encompass the listener.

Hi-Fi DSP programs

The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments.

No.

1

2

3

4 ENTERTAINMENT/

Disco

Program

CONCERT HALL

JAZZ CLUB

ROCK CONCERT

ENTERTAINMENT/

6ch Stereo

Features

A large round concert hall with a rich surround effect. Pronounced reflections from all directions emphasize the extension of sounds. The sound field has a great deal of presence, and your virtual seat is near the center, close to the stage.

This is the sound field at stage front in “The Bottom Line”, a famous New York jazz club, that seats up to 300 people. Its wide left to right seating arrangement offers a real and vibrant sound.

The ideal program for lively, dynamic rock music. The data for this program was recorded at

LA’s “hottest” rock club. The listener’s virtual seat is at the center-left of the hall.

This program recreates the acoustic environment of a lively disco in the heart of a big city. The sound is dense and highly concentrated. It is also characterized by a high-energy, “immediate” sound.

Using this program increases the listening position range. This is a sound field suitable for background music at parties, etc.

12/27/01, 7:46 PM

29

0106V630_29-33_EN(U) 29

CINEMA-DSP

Sound design of CINEMA-DSP

Filmmakers intend for the dialog to be located right on the screen, the effect sound a little farther back, the music spread even farther back, and the surround sound around the listener. Of course, all of these sounds must be synchronized with the images on the screen.

CINEMA-DSP is an upgraded version of YAMAHA DSP specially designed for movie soundtracks. CINEMA-DSP integrates the DTS, Dolby Digital, and Dolby Pro Logic surround sound technologies with YAMAHA DSP sound field programs to provide a surround sound field. It recreates comprehensive movie sound design in your audio room. In

CINEMA-DSP sound field programs, YAMAHA’s exclusive DSP processing is added to the Main left and right, and

Center channels, so the listener can enjoy realistic dialogue, depth of sound, smooth transition between sound sources, and a surround sound field that goes beyond the screen.

When a DTS or Dolby Digital signal is detected, the CINEMA-DSP sound field processor automatically chooses the most suitable sound field program for that signal.

L SURROUND SOUND FIELD

PRESENCE SOUND FIELD

DIALOG EFFECT MUSIC

R SURROUND SOUND FIELD

In addition to the DSP, this unit is equipped with a variety of precise decoders; Dolby Pro Logic decoder for Dolby

Surround sources, Dolby Pro Logic decoder for Dolby Surround and 2-channel sources, Dolby Digital/DTS decoder for multi-channel sources and Dolby Digital EX or DTS-ES compatible decoder for adding a rear center channel. You can select CINEMA-DSP programs to optimize these decoders and the DSP sound patterns depending on the input source.

30

0106V630_29-33_EN(U) 30 12/27/01, 7:46 PM

CINEMA-DSP

The 6-channel soundtracks found on 70-mm film produce precise sound field localization and rich, deep sound without using matrix processing. This unit’s MOVIE THEATER programs provide the same quality of sound and sound localization that 6-channel soundtracks do. The built-in Dolby Digital or DTS decoder brings the professional-quality sound designed for movie theaters into your home. With this unit’s MOVIE THEATER programs, you can use Dolby

Digital or DTS technology to recreate a dynamic sound that gives you the feeling of being in a public theater.

Dolby Digital/DTS + DSP sound field effect

These programs use YAMAHA’s tri-field DSP processing

Presence DSP sound field on each of the Dolby Digital or DTS signals for the front, left surround, and right surround channels. This processing enables this unit to reproduce the immense sound field and surround expression of a Dolby Digitalor DTS-equipped movie theater without sacrificing the clear separation of all channels.

Left surround DSP sound field

Right surround DSP sound field

Dolby Digital EX/DTS-ES compatible + DSP sound field effect

These programs provide you with the maximum experience of the spacious surround effects by adding an extra rear center DSP sound field created from the rear center channel.

Dolby Pro Logic + DSP sound field effect

Presence DSP sound field

Surround DSP sound field

Most movie software has 4-channel (left, center, right, and surround) sound information encoded by Dolby

Surround matrix processing and stored on the left and right tracks. These signals are processed by the Dolby Pro

Logic decoder. The MOVIE THEATER programs are designed to recreate the spaciousness and delicate nuances of sound that tend to be lost in the encoding and decoding processes.

Dolby Pro Logic

Dolby Pro Logic decodes Dolby Surround software into 5 discrete full-range channels (3 channels in front and 2 channels in rear). There are 2 modes; MOVIE for movies and MUSIC for 2-channel audio sources.

0106V630_29-33_EN(U) 31 12/27/01, 7:46 PM

31

CINEMA-DSP

CINEMA-DSP programs

For movie programs: No. 7 to 9

This unit automatically chooses the appropriate decoder and DSP sound field pattern according to the input signal format.

Table of Program Names for Each Input Format

No.

7

8

9

Program

MOVIE

THEATER 1

MOVIE

DOLBY

DIGITAL

Input

THEATER 2

DTS DIGITAL

SUR

PRO LOGIC

PRO LOGIC

2 channel

Stereo

70 mm Spectacle

70 mm Sci-Fi

70 mm Adventure

70 mm General

DGTL Spectacle

DGTL Sci-Fi

DGTL Adventure

DGTL General

Normal

Enhanced

5.1 channel

DOLBY DIGITAL DTS

DTS Spectacle

DTS Sci-Fi

DTS Adventure

DTS General

Normal

Enhanced

DOLBY DIGITAL

EX

6.1 channel *

DTS-ES compatible

Spectacle EX

Sci-Fi EX

Adventure EX

General EX

Spectacle ES

Sci-Fi ES

Adventure ES

General ES

Dolby D EX

Enhanced EX

DTS-ES

Enhanced ES

Normal

Enhanced

Movie

Music — — — —

* means the Dolby Digital EX decoder or the DTS-ES compatible decoder is ON.

y

• If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will automatically switch to the Dolby Digital playback sound field or DTS playback sound field.

• If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the EX/ES button on the remote control, the Dolby Digital EX or DTS-ES compatible decoder usually turns on and the corresponding DSP program is selected.

• EX/ES on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with the rear center speaker. In this case the program name changes to the corresponding name for 6.1 channel.

• When playing a 6.1 channel source with the Dolby Digital EX decoder or the DTS-ES compatible decoder turned off, the program name changes to the corresponding name for 5.1 channel.

Notes

• The “ ” indicator does not light up when selecting program No. 9 except in Enhanced mode.

• When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, main and rear speakers output effect sounds.

32

0106V630_29-33_EN(U) 32 12/27/01, 7:46 PM

CINEMA-DSP

The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. Select the DSP program that you feel sounds best regardless of the name and description given for it below.

No.

7

Program

MOVIE

THEATER 1

Spectacle

8

9

Sci-Fi

MOVIE

THEATER 2

Adventure

General

Enhanced Mode

Features

This program creates the extremely wide sound field of a 70-mm movie theater. It precisely reproduces the source sound in detail, making both the video and the sound field incredibly real. This is ideal for any kind of video source encoded with Dolby

Surround, Dolby Digital or DTS (especially large-scale movie productions).

This program clearly reproduces dialog and sound effects in the latest sound form of science fiction films, thus creating a broad and expansive cinematic space amid the silence. You can enjoy science fiction films in a virtual-space sound field that includes

Dolby Surround, Dolby Digital and DTS-encoded software employing the most advanced techniques.

This program is ideal for precisely reproducing the sound design of the newest 70-mm and multichannel soundtrack films. The sound field is made to be similar to that of the newest movie theaters, so the reverberations of the sound field itself are restrained as much as possible.

This program is for reproducing sounds from 70-mm and multichannel soundtrack films, and is characterized by a soft and extensive sound field. The presence sound field is relatively narrow. It spatially spreads all around and toward the screen, restraining the echo effect of conversations without losing clarity.

This program ideally simulates the multi-surround speaker systems of the 35-mm film theaters. Dolby Pro Logic decoding, Dolby Digital decoding or DTS decoding and digital sound field processing create precise effects without altering the original sound orientation.

The surround effects produced by this sound field wrap around the viewer naturally from the back to the left and right, and toward the screen.

For audio-video sources: No. 4 to 6

No.

4

Program

ENTERTAINMENT/

Game

5

ENTERTAINMENT/

Concert Video

TV SPORTS

6 MONO MOVIE

Features

This program adds a deep and spatial feeling to video game sounds.

This program adds a deep and spatial feeling to concert video sounds.

With this program, you can enjoy watching various TV programs such as news, variety shows, music programs or sports programs. In a stereo broadcast of a sports game, the commentator is oriented at the center position, and the shouts and the atmosphere in the stadium spread on the surround side, while their spread to the rear is properly restrained.

This program is provided for reproducing monaural video sources (such as old movies). The program produces the optimum reverberation to create sound depth by using only the presence sound field.

0106V630_29-33_EN(U) 33 12/27/01, 7:46 PM

33

TUNING

Automatic and manual tuning

There are 2 ways to tune; automatic and manual.

Automatic tuning is effective when station signals are strong and there is no interference.

Automatic tuning

1

4 Press PRESET/TUNING l / h once to begin automatic tuning.

Press h to tune in to a higher frequency, or press l to tune in to a lower frequency.

PRESET/TUNING

/DVR VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER

TUNED

A A M 1 4 4 O

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– + –

TREBLE

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

+

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

4 3 3 2

1 Press INPUT l / h (TUNER on the remote control) to select TUNER as the input source.

INPUT or

POWER

TV

CD

POWER

AV

MD/CD-R

STANDBY

TUNER

SYSTEM

POWER

SLEEP

DVD

D-TV/CBL

V-AUX 6CH INPUT

Front panel

VCR 1 VCR2/DVR A AMP

Remote control

2 Press FM/AM to select the reception band.

“FM” or “AM” appears on the front panel display.

FM/AM or

When tuned in to a station, the “TUNED” indicator lights up and the frequency of the received station is shown on the front panel display.

y

• Use the manual tuning method if the tuning search does not stop at the desired station because the signal is weak.

Manual tuning

If the signal from the station you want to select is weak, you must tune in to it manually.

1 Select TUNER and the reception band following steps 1 and 2 described in

“Automatic tuning” at left.

2 Press TUNING MODE (AUTO/MAN’L MONO) so that the “AUTO” indicator goes off from the front panel display.

TUNING MODE

AUTO

AUTO/MAN'L MONO

Goes off

If the colon (:) appears on the front panel display, press PRESET/TUNING (EDIT) to turn it off.

PRESET/TUNING

EDIT

/DVR VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER

TUNED

A A M 1 4 4 O

3 Press TUNING MODE (AUTO/MAN’L MONO) so that the “AUTO” indicator lights up on the front panel display.

TUNING MODE

AUTO/MAN'L MONO

AUTO

Lights up

If the colon (:) appears on the front panel display, press PRESET/TUNING (EDIT) to turn it off.

3 Press PRESET/TUNING l / h to tune in to the desired station manually.

Hold down the button to continue the tuning search.

PRESET/TUNING

Note

• Manually tuning in to an FM station will automatically change the reception mode to monaural to increase the signal quality.

PRESET/TUNING

EDIT

/DVR VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER

TUNED

A A M 1 4 4 O

34

0107V630_34-39_EN(U) 34 12/27/01, 7:46 PM

Presetting stations

Automatically presetting stations

(for FM stations)

You can use the automatic preset tuning feature to store

FM stations. This function enables this unit to automatically tune in to FM stations with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order. This feature enables you to easily tune in to any preset station by selecting the preset station number (see page 37).

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– + –

TREBLE

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

+

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

2 3 1

1 Press FM/AM to select the FM band.

FM/AM

2 Press TUNING MODE (AUTO/MAN’L MONO) so that the “AUTO” indicator lights up on the front panel display.

TUNING MODE

AUTO

AUTO/MAN'L MONO

Lights up

3 Press and hold MEMORY (MAN’L/AUTO FM) for more than 3 seconds.

The preset number and the “MEMORY” and

“AUTO” indicators flash. Then, after about

5 seconds, automatic preset tuning begins from the frequency currently displayed toward the higher frequencies.

MEMORY

MAN'L/AUTO FM

TUNING

Notes

• Any stored station data existing under a preset number is cleared when you store a new station under that preset number.

• When a station data is stored under a preset number, the frequency and reception band are also stored.

• You can manually replace a preset station with another FM or

AM station by simply following the procedure in the section

“Manually presetting stations” on page 36.

• If the number of the received stations does not reach E8, automatic preset tuning has automatically stopped after searching all stations.

• Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune in to it manually in the monaural mode, and store it by following the procedure in “Manually presetting stations” on page 36.

Automatic preset tuning options

You can select the preset number from which this unit will store FM stations and/or begin tuning toward lower frequencies. After pressing MEMORY in step 3:

1. Press A/B/C/D/E and PRESET/TUNING l / h to select the preset number under which the first station will be stored. Automatic preset tuning will stop when stations have all been stored up to E8.

2. Press PRESET/TUNING (EDIT) to turn off the colon

(:) and then press PRESET/TUNING l to begin tuning toward lower frequencies.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the preset stations may be cleared. If so, store the stations again.

VCR2/DVR VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER

AUTO

MEMORY

CD

VOLUME

L R

A 1 : F M

When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station.

35

0107V630_34-39_EN(U) 35 12/27/01, 7:47 PM

TUNING

Manually presetting stations

You can also store up to 40 stations (8 stations x 5 groups) manually.

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– + –

TREBLE

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

+

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

4 Press PRESET/TUNING l / h to select a preset station number (1 to 8) while the

“MEMORY” indicator is flashing.

Press h to select a higher preset station number.

Press l to select a lower preset station number.

PRESET/TUNING

VCR2/DVR VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER

TUNED MEMORY

CD

VOLUME

C 3 : A M 6 3 O k H z

L R

4 3 2,5

1 Tune in to a station.

See page 34 for tuning instructions.

VCR 1 V-AUX D-TV/CBL MD/CD-R TUNER VCR2/DVR DVD

TUNED

A A M 6 3 O k H z

CD

VOLUME

L R

When tuned in to a station, the front panel display shows the frequency of received station.

2 Press MEMORY (MAN’L/AUTO FM).

The “MEMORY” indicator flashes for about

5 seconds.

MEMORY

MEMORY

MAN'L/AUTO FM

Flashes

3 Press A/B/C/D/E repeatedly to select a preset station group (A to E) while the “MEMORY” indicator is flashing.

The group letter appears and make sure that the colon (:) appears on the front panel display.

A/B/C/D/E

5 Press MEMORY (MAN’L/AUTO FM) on the front panel while the “MEMORY” indicator is flashing.

MEMORY

The station band and frequency appear on the front

MAN'L/AUTO FM panel display with the preset group and number you have selected.

VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER VCR2/DVR

TUNED

C 3 : A M 6 3 O k H z

CD

VOLUME

L R

Shows the displayed station has been stored as C3.

6 Repeat steps 1 to 5 to store other stations.

Notes

• Any stored station data existing under a preset number is cleared when you store a new station under that preset number.

• The reception mode (stereo or monaural) is stored along with the station frequency.

VCR2/DVR VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER CD

VOLUME

TUNED MEMORY

C : A M 6 3 O k H z

L R

36

0107V630_34-39_EN(U) 36 12/27/01, 7:47 PM

Tuning in to a preset station

You can tune any desired station simply by selecting the preset station number under which it was stored.

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– + –

TREBLE

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

+

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

TUNING

Exchanging preset stations

You can exchange the assignment of two preset stations.

The example below describes the procedure for exchanging preset station “E1” with “A5”.

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– + –

TREBLE

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

+

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

2 1

LEVEL

TITLE

TEST

RETURN

REC

DISC SKIP

PRESET/CH

SELECT

EFFECT

SET MENU

MENU

A/B/C/D/E

+

DISPLAY

AUDIO

1

2

1 Press A/B/C/D/E (A/B/C/D/E on the remote control) to select the preset station group.

The preset group letter appears on the front panel display and changes each time you press A/B/C/D/E.

A/B/C/D/E or

SET MENU

MENU

A/B/C/D/E

Front panel Remote control

2 Press PRESET/TUNING l / h (PRESET u

/ d on the remote control) to select a preset station number (1 to 8).

The preset group and number appear on the front panel display along with the station band, frequency and the “TUNED” indicator lights up.

PRESET/CH

PRESET/TUNING or

SELECT

+

Front panel

Remote control

PRESET/TUNING

EDIT

1,3 1,3 2,4

1 Tune in to preset station “E1” by using the

A/B/C/D/E and PRESET/TUNING l / h.

See “Tuning in to a preset station” at left.

2 Press and hold PRESET/TUNING (EDIT) for more than 3 seconds.

“E1” and the “MEMORY” indicator flash on the front panel display.

VCR2/DVR VCR 1 V-AUX D-TV/CBL MD/CD-R TUNER DVD

TUNED MEMORY

E 1 : F M 8 7 . 5 M H z

CD

3 Tune in to preset station “A5” by using the

A/B/C/D/E and PRESET/TUNING l / h.

“A5” and the “MEMORY” indicator flash on the front panel display.

VCR2/DVR VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER

TUNED MEMORY

CD

VOLUME

A 5 : F M 9 O . 6 M H z

L R

4 Press PRESET/TUNING (EDIT) again.

The stations stored at the two preset assignments are exchanged.

PRESET/TUNING

EDIT

VCR2/DVR VCR 1 V-AUX D-TV/CBL DVD

E D I T E 1 - A 5

MD/CD-R TUNER

MEMORY

CD

Shows the exchange of stations has been completed.

VCR 1 V-AUX D-TV/CBL VCR2/DVR DVD MD/CD-R TUNER

TUNED

E 1 : F M 8 7 . 5 M H z

CD

0107V630_34-39_EN(U) 37 12/27/01, 7:47 PM

37

SLEEP TIMER

Use this feature to automatically set this unit in the standby mode after the amount of time you have set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off the external component(s) connected to AC OUTLET(S).

The sleep timer can only be set with the remote control.

y

• By connecting a commercially available timer to this unit, you can also set a wake-up timer. Refer to the operation instructions of the timer.

Setting the sleep timer

Canceling the sleep timer

1 Press SLEEP repeatedly until “SLEEP OFF” appears on the front panel display.

After a few seconds, “SLEEP OFF” disappears, the

“SLEEP” indicator goes off and the display returns to the previous indication.

SLEEP

y

• The sleep timer setting can also be canceled by setting this unit in the standby mode by using STANDBY on the remote control

(or STANDBY/ON on the front panel) or by disconnecting the

AC power cord from the AC outlet.

1

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

STANDBY

MD/CD-R TUNER

SYSTEM

POWER

SLEEP

DVD D-TV/CBL V-AUX 6CH INPUT

VCR 1 VCR2/DVR A AMP

+

TV VOL

TV MUTE

+

TV CH

TV INPUT

+

VOLUME

MUTE

2

1 Select a source and start playback on the source component.

2 Press SLEEP repeatedly to set the amount of time.

Each time you press SLEEP, the front panel display changes as shown below.

SLEEP

DSP

PCM

VCR2/DVR VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER CD

SLEEP

VOLUME

S L E E P 1 2 O m i n

L R

3 The “SLEEP” indicator lights up on the front panel display soon after the sleep timer has been set.

The display then returns to the previous indication.

DSP

PCM

VCR2/DVR VCR 1 V-AUX D-TV/CBL DVD MD/CD-R TUNER CD

SLEEP

VOLUME

C O N C E R T H A L L

L R

38

0107V630_34-39_EN(U) 38 12/27/01, 7:47 PM

RECORDING

Recording adjustments and other operations are performed from the recording components. Refer to the operation instructions for these components.

1 2

STANDBY

/ON

SILENT

PHONES

INPUT M0DE

INPUT VOLUME

6CH INPUT

NATURAL SOUND AV RECEIVER

SPEAKERS

A B STEREO

EFFECT

PROGRAM PRESET/TUNING A/B/C/D/E

BASS

– + –

TREBLE

PRESET/TUNING FM/AM

EDIT

TUNING MODE MEMORY

AUTO/MAN'L MONO MAN'L/AUTO FM

+

VIDEO AUX

S VIDEO VIDEO L AUDIO R OPTICAL

INPUT

2

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

STANDBY

MD/CD-R TUNER SLEEP

DVD D-TV/CBL V-AUX 6CH INPUT

VCR 1 VCR2/DVR

A

AMP

+

TV VOL

TV MUTE

HALL

+

TV CH

TV INPUT

+

VOLUME

MUTE

JAZZ CLUB

ROCK

CONCERT

ENTER-

TAINMENT

1 Turn on the power of this unit and all connected component.

2 Select the source component you want to record from.

or

CD MD/CD-R TUNER SLEEP

DVD D-TV/CBL V-AUX 6CH INPUT

VCR 1 VCR2/DVR A AMP

Front panel Remote control

3 Start playback (or select a broadcast station) on the source component.

4 Start recording on the recording component.

Notes

• Do a test recording before you start an actual recording.

• When this unit is set in the standby mode, you cannot record between the components connected to this unit.

• The setting of BASS, TREBLE, VOLUME, “5 L/R

BALANCE” on the SET MENU and DSP programs does not effect the recorded material.

• A source connected to the 6CH INPUT jacks on this unit cannot be recorded.

• A given input source is not output to the same OUT (REC) channel. (For example, the signal input from VCR 1 IN is not output to VCR 1 OUT.)

• Check the copyright laws in your country to record from records, CDs, radio, etc. Recording of copyrighted material may infringe copyright laws.

If you playback a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals.

Special considerations when

recording DTS software

The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise being recorded. Therefore, if you want to use this unit to record sources that have DTS signals recorded on them, the following considerations and adjustments need to be made.

For LDs, DVDs and CDs encoded with DTS, when your player is compatible with the DTS format, follow its operation instruction to make a setting so that the analog signal will be output from the player.

Timer playback/recording

This unit can perform playback or recording with an external timer (not supplied). Refer to the operating instructions for the component and the timer to be used.

Notes

• Stored data, such as input source, will be reflected when playback or recording with the timer.

• If you do not want any sound output when recording with a timer, turn the volume down.

Memory back-up

The memory back-up circuit prevents the stored data

(input source, volume level, set menu settings and so on) from being lost even if this unit is disconnected from the AC outlet. However, if the timer is turned off for more than one week, the stored data will be lost.

39

0107V630_34-39_EN(U) 39 12/27/01, 7:47 PM

ADVANCED OPERATION

SET MENU

The SET MENU consists of 10 items including the speaker mode setting. Choose the appropriate item and adjust or select the values as necessary.

y

• You can adjust the items on the SET MENU while playing a source.

Items Initial settings

1 SPEAKER SET

A CENTER

B MAIN

C REAR LR

D REAR CT

E BASS

F MAIN Lv

2 LFE LEVEL SP/HP

LRG (large)

LARGE

LRG (large)

LRG (large)

BOTH

Nrm (Normal)

0 dB

3 SP DLY TIME

CENTER

REAR CNTR

0 ms

3 ms

4 D. RANGE SP/HP MAX

5 L/R BALANCE 0 dB for L/R

6 HP TONE CTRL BASS/TRBL 0 dB

7 I/O ASSIGN

A (component video input) [A] DVD

[B] D-TV/CBL

B (optical output)

C (optical input)

(1) MD/CDR

(2) MD/CDR

(3) DVD

(4) D-TV/CBL

D (coaxial input)

8 INPUT MODE

(5) CD

AUTO

9 DISPLAY SET

DIMMER

10 MEM. GUARD

0

OFF

• In the descriptions for each item from the following page, the default setting is indicated in bold.

Adjusting the items on the SET

MENU

Adjustment should be made with the remote control.

AMP VCR 1 VCR2/DVR

A 1

3,6

+

TV VOL

TV MUTE

+

TV CH

TV INPUT

+

VOLUME

MUTE

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

MONO

MOVIE

6

ROCK

CONCERT

3

MOVIE

THEATER 1

7

ENTER-

TAINMENT

4

MOVIE

THEATER 2

8

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

PRESET/CH

LEVEL

TITLE

SELECT

SET MENU

MENU

A/B/C/D/E

+ –

TEST

RETURN

DISPLAY

REC

AUDIO

DISC SKIP

6

2

4,5

Note

• Some items require extra steps.

1 Press AMP.

AMP

2 Press SET MENU to enter the SET MENU.

3 Press u/d repeatedly to select the item you want to adjust (1 to 10).

SET MENU

MENU

A/B/C/D/E

PRESET/CH

SELECT

+

y

• By pressing SET MENU repeatedly, you can select items in the same order as when pressing d.

PRESET/CH 4 Press j / i once to enter the setup mode of the selected item.

The last setting you adjusted appears on the front panel display.

SELECT

+

PRESET/CH

Depending on the item, press u

/d to select a sub item.

SELECT

+

40

0108V630_40-45_EN(U) 40 12/27/01, 7:47 PM

5 Press j / i repeatedly to change the setting of the item.

PRESET/CH

SELECT

+

6 Press u/d repeatedly until the menu disappears or simply press one of the DSP program group buttons to exit SET MENU.

PRESET/CH

SELECT

+ or

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MONO

MOVIE

6

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If so, adjust the items again.

SET MENU

1 SPEAKER SET (speaker mode settings)

Use this feature to select suitable output modes for your speaker configuration.

Notes

• When 96-kHz sampling digital signals are input to this unit, some items are not affected.

• When 6CH INPUT is selected as the input source, level adjustments in items 1A through 1E are not affected.

1A CENTER (center speaker

mode)

By adding a center speaker to your speaker configuration, this unit can provide better dialog localization for several listeners and superior synchronization of sound and images.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large center speaker. The entire range of the center channel signal is directed to the center speaker.

SML

Select this if you have a small center speaker. The lowfrequency signals (90 Hz and below) of the center channel are directed to the speakers selected with “1E

BASS”.

NON

Select this if you do not have a center speaker. All of the center channel signal are directed to the main left and right speakers.

0108V630_40-45_EN(U) 41 12/27/01, 7:47 PM

41

SET MENU

1B MAIN (main speaker mode)

Choices: LARGE, SMALL

LARGE

Select this if you have large main speakers. The entire range of the main left and right channel signal is directed to the main left and right speakers.

SMALL

Select this if you have small main speakers. The lowfrequency signals (90 Hz and below) of the main channel are directed to the speakers selected with “1E BASS”.

1C REAR LR (rear speaker mode)

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have large rear left and right speakers or if a rear subwoofer is connected to the rear speakers. The entire range of the rear channel signal is directed to the rear left and right speakers.

SML

Select this if you have small rear left and right speakers.

The low-frequency signals (90 Hz and below) of the rear channel are directed to the speakers selected with “1E

BASS”.

NON

Select this if you do not have rear speakers.

y

• This unit is set in the virtual CINEMA DSP mode when you select NON for “1C REAR LR”. In this case, the rear center speaker will automatically be set to “NON” and the “1D REAR

CT” item will be skipped.

1D REAR CT (rear center speaker

mode)

By adding a rear center speaker to your speaker configuration, this unit can provide more realistic frontto-back and transitions.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large rear center speaker. The entire range of the rear center channel signal is directed to the rear center speaker.

SML

Select this if you have a small rear center speaker. The low-frequency signals (90 Hz and below) of the rear center channel are directed to the speakers selected with

“1E BASS”.

NON

Select this if you do not have a rear center speaker. All of the rear center channel signal are directed to the rear left and right speakers.

1E BASS (LFE/bass out mode)

LFE signals carry low-frequency effects when this unit decodes a Dolby Digital or DTS signal. Low-frequency signals are defined as 90 Hz and below. The Lowfrequency signals can be directed to both main left and right speakers, and the subwoofer (subwoofer can be used for both stereo reproduction and the DSP program).

Choices: SWFR (subwoofer), MAIN, BOTH

SWFR

Select this if you use a subwoofer. The LFE signals are directed to the subwoofer.

MAIN

Select this if you do not use a subwoofer. The LFE signals are directed to the main speakers.

BOTH

The LFE signals are directed to the subwoofer. Lowfrequency signals designated to the main channels in accordance with other speaker mode settings are directed to both main speakers and a subwoofer.

Note

• When you select MAIN for “1E BASS”, the low-frequency signals (90 Hz and below) of the main channel are directed to the main speakers even if you select SMALL for the main speaker mode.

42

0108V630_40-45_EN(U) 42 12/27/01, 7:47 PM

1F MAIN Lv (main level mode)

Change this setting if you cannot match the output level of the center, rear (L/R), and rear center speakers with the main speakers because of unusually high-efficiency performance from the main speakers.

Choices: Nrm (Normal), –10 dB

Nrm

Select this if you can match the output level of your effect speakers with that of your main speakers when using the test tone.

–10 dB

Select this if you cannot match the output level of your effect speakers with that of your main speakers when using the test tone.

2 LFE LEVEL

Use this feature to adjust the output level of the LFE

(low-frequency effect) channel when playing back a

Dolby Digital or DTS signal. The LFE signal carries the low-frequency special effect sound which is only added to certain scenes.

Control range:

SPEAKER ............ –20 to 0 dB

HEADPHONE ..... –20 to 0 dB

Initial setting: 0 dB

1 Press d/u to select the item to be adjusted.

SET MENU

3 SP DLY TIME (speaker delay time)

Use this feature to adjust the delay of the center and the rear center channel sounds. This feature works when there is sound output from the center speakers, with a source like Dolby Digital or DTS, etc. Ideally, the center speaker and the rear center speaker should be the same distance from the main listening position as the left and right speakers. However, in most home situations, the center speaker or the rear center speaker are placed in line with the main speakers or the rear speakers. By delaying the sound from the center speaker and the rear center speaker, the apparent distance from the center speaker and the rear center speaker to the main listening position can be adjusted to make it seem the same as the distance between the main left and right speaker, and the rear left and right speakers to the listening position. Adjusting the delay time for the center speaker is especially important for giving depth to the dialogue.

Control range:

CENTER .......................... 0 to 5 ms

REAR CNTR (center) ...... 0 to 30 ms

Initial setting:

CENTER .......................... 0 ms

REAR CNTR (center) ...... 3 ms

1 Press j / i to increase or decrease the delay of the center and the rear center channel sounds.

Center speaker image

2 Press j to adjust the LFE level.

Note

• Adjust the LFE level according to the capacity of your subwoofer or headphones.

L

C

C R

RL RC

RC

RR

y

• Increasing the delay by 1 ms simulates moving the speakers about 30 cm (one foot) farther away from the listening position.

0108V630_40-45_EN(U) 43 12/27/01, 7:47 PM

43

SET MENU

4 D. RANGE (dynamic range)

Use this feature to adjust the dynamic range. This setting is effective only when this unit is decoding Dolby Digital signals.

Choices: MAX, STD (standard), MIN (minimum)

MAX

Select the “MAX” for feature films.

STD

Select the “STD” for general use.

MIN

Select the “MIN” for listening to sources at low volume levels.

5 L/R BALANCE (balance of the main left and right speakers)

Use this feature to adjust the balance of the output level from the main left and right speakers.

Control range: 20 steps for L/R

Initial setting: 0 dB for L/R

1 Press i to decrease the output level for the

main left speaker. Press j for the main right speaker.

6 HP TONE CTRL (headphone tone control)

Use this feature to adjust the level of the bass and treble when you use your headphones.

Control range (dB):

BASS ............... –6 to +3

TRBL (treble) .. –6 to +3

Initial setting:

BASS ............... 0 dB

TRBL ............... 0 dB

7 I/O ASSIGN (input/output assignment)

It is possible to assign jacks according to the component to be used if this unit’s COMPONENT VIDEO input jack or DIGITAL INPUT/OUTPUT jack settings (component names for jacks) differ from that component. This makes it possible to change the jack assignment and effectively connect more components.

Once you assign, you can select that component with

INPUT l / h (or the input selector buttons on the remote control).

7A CMPNT-V INPUT for

COMPONENT VIDEO INPUT jacks

[A] and [B]

Choices: [A] DVD, V-AUX, VCR 2/DVR, VCR 1,

D-TV/CBL

[B] DVD, V-AUX, VCR 2/DVR, VCR 1,

D-TV/CBL

7B OPTICAL OUT for OPTICAL

OUTPUT jack (1)

Choices: (1) MD/CD-R, CD, V-AUX, VCR 2/

DVR, VCR 1, D-TV/CBL, DVD

7C OPTICAL IN for OPTICAL

INPUT jacks (2) to (4)

Choices: (2) MD/CD-R, CD, VCR 2/DVR, VCR 1,

D-TV/CBL, DVD

(3) MD/CD-R, CD, VCR 2/DVR, VCR 1,

D-TV/CBL, DVD

(4) MD/CD-R, CD, VCR 2/DVR, VCR 1,

D-TV/CBL, DVD

7D COAXIAL IN for COAXIAL

INPUT jack (5)

Choices: (5) MD/CD-R, CD, V-AUX, VCR 2/

DVR, VCR 1, D-TV/CBL, DVD

Notes

• You cannot select an item more than once for the same type of jack.

• When you connect a component to both the COAXIAL and

OPTICAL jacks, priority is given to the input signals from the

COAXIAL jack.

44

0108V630_40-45_EN(U) 44 12/27/01, 7:47 PM

SET MENU

8 INPUT MODE (initial input mode)

Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn on this unit (see page 25 for details about the input mode).

Choices: AUTO, LAST

AUTO

Select this to allow this unit to automatically detect the type of input signal and select the appropriate input mode.

LAST

Select this to set this unit to automatically select the last input mode used for the respective source.

9 DISPLAY SET

DIMMER

You can adjust the brightness of the front panel display.

Control range: –4 to 0

Initial setting: 0

10 MEM. GUARD (memory guard)

Use this feature to prevent accidental changes to settings on this unit.

Choices: ON, OFF

Select ON to protect the following features:

• All SET MENU items

• Center, rear speakers, rear center, and subwoofer levels

• DSP program parameters

Notes

• When this item is set to ON, you cannot use the test tone.

• When this item is set to ON, you cannot select any other SET

MENU items.

0108V630_40-45_EN(U) 45 12/27/01, 7:47 PM

45

REMOTE CONTROL FEATURES

In addition to controlling this unit, the remote control can operate other A/V components made by YAMAHA and other manufacturers. To control other components, you must set up the remote control with the manufacturer codes.

Control area

Controlling this unit

The shaded areas below can be used to control this unit when the AMP mode is selected. Press AMP to select the

AMP mode.

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

STANDBY

MD/CD-R TUNER

SYSTEM

POWER

SLEEP Å button and input selector buttons

DVD D-TV/CBL V-AUX 6CH INPUT

VCR 1 VCR2/DVR

A

AMP

Press AMP to control this unit.

+

TV VOL

TV MUTE

+

TV CH

TV INPUT

+

VOLUME

MUTE

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

MONO

MOVIE

6

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

LEVEL

TITLE

PRESET/CH

SELECT

STEREO

ENTER

EFFECT

SET MENU

MENU

A/B/C/D/E

+ –

TEST

RETURN

DISPLAY

REC

AUDIO

DISC SKIP

The buttons in the dotted lines

(SYSTEM

POWER,

STANDBY,

SLEEP, 6CH

INPUT, VOLUME

+/– and MUTE) function in any mode.

Controlling other component

The shaded areas below can be used to control other components. Each button has a different function depending on the selected components. Select the component to be controlled by pressing an input selector button.

Å button and input selector buttons switch the control area for each component.

* Å button is to operate the other components that are not connected to this unit.

Factory setting:

Å...VCR

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

STANDBY

MD/CD-R TUNER

SYSTEM

POWER

SLEEP

DVD

D-TV/CBL

V-AUX 6CH INPUT

VCR 1 VCR2/DVR

A

AMP

+

TV VOL

TV MUTE

+

VOLUME

+

TV CH

TV INPUT

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

MONO

MOVIE

6

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

PRESET/CH

LEVEL

TITLE

SELECT

SET MENU

MENU

A/B/C/D/E

+ –

TEST

RETURN DISPLAY

REC

AUDIO

DISC SKIP

Component control area

You can control up to 9 different components. You can set up manufacturer code and program other remote control functions for each component (see page 48).

46

0109V630_46-51_EN(U) 46 12/27/01, 7:47 PM

Setting the manufacturer code

You can control other components by setting a manufacturer code. Codes can be set for each of the 9 component controls.

The following table shows factory-set component

(Library: component category) and the manufacturer code for each component control.

Component control

(buttons)

CD

MD/CD-R

TUNER

DVD

D-TV/CBL

V-AUX

VCR 1

VCR 2/DVR

A

Component category

(Library)

Manufacturer Code

CD

MD

TUNER

DVD

YAMAHA

YAMAHA

YAMAHA

YAMAHA

0005

0024

0003

0098

REMOTE CONTROL FEATURES

Clearing setup manufacturer codes

Clearing setup manufacturer

code for the component control

1 Press an input selector button or Å to select the component control for which you want to clear the manufacturer code.

SYSTEM

POWER POWER

TV

POWER

AV

STANDBY

CD SLEEP MD/CD-R TUNER

DVD D-TV/CBL V-AUX 6CH INPUT

VCR 1 VCR2/DVR A AMP

2 Press CODE SET by using a ballpoint pen or similar object.

The TRANSMIT indicator flashes twice.

CODE SET

TRANSMIT

1 Press an input selector button or Å to select

2 the component you want to set up.

CD MD/CD-R TUNER SLEEP

DVD D-TV/CBL V-AUX 6CH INPUT

VCR 1 VCR2/DVR A AMP

Press CODE SET using a ballpoint pen or similar object.

The TRANSMIT indicator flashes twice.

CODE SET

TRANSMIT

Note

• If you do not press any button within 30 seconds after step 2, the clearing process is canceled. If this happens, start over from step 1.

3 Enter the code number “0000”.

The TRANSMIT indicator flashes twice, and the manufacturer code for the selected component is cleared.

y

• You can clear all setup manufacturer codes at once by entering the code number “9990”.

3 Press the numeric buttons to enter the four digit manufacturer’s code for the component to be used.

Refer to “LIST OF MANUFACTURER’S CODES”

at the end of this manual.

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MONO

MOVIE

6

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

STEREO

ENTER

EFFECT

The TRANSMIT indicator flashes twice.

Notes

• If the manufacturer of your component has more than one code, try each of them until you find the correct one.

• If you wait for more than 30 seconds during step 3, the setup process is canceled. If this happens, start over from step 2.

47

0109V630_46-51_EN(U) 47 12/27/01, 7:47 PM

REMOTE CONTROL FEATURES

Controlling other components

You can operate other components when you have set the manufacturer code for your component. Note, however, that some buttons may not operate your component.

Once you select an input source, the remote control switches to the mode for operating the component.

1

2

3

4

5

6

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

MD/CD-R

STANDBY

TUNER

SYSTEM

POWER

SLEEP

DVD D-TV/CBL V-AUX 6CH INPUT 7

VCR 1 VCR2/DVR A AMP

+

TV VOL

TV MUTE

HALL

1

+

TV CH

TV INPUT

+

VOLUME

MUTE

JAZZ CLUB

2

ROCK

CONCERT

3

ENTER-

TAINMENT

4 q

8

9

0

TV MUTE TV INPUT

MUTE

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

MONO

MOVIE

6

ROCK

CONCERT

3

ENTER-

TAINMENT

4

MOVIE

THEATER 1

MOVIE

THEATER 2

7 8

SELECT

0

EX/ES

+10

LEVEL

TITLE

TEST

RETURN

PRESET/CH

SELECT

STEREO

ENTER

EFFECT

SET MENU

MENU

A/B/C/D/E

+

DISPLAY

REC

AUDIO

DISC SKIP w e r

DVD player VCR TV, digital/cable TV CD player CD/MD recorder Tuner

1 AV POWER

2 TV POWER

3 TV CH + * 2

* 1 Power

* 2 TV power

TV channel up

* 2

* 1 Power

TV power

* 2 TV channel up

* 2 TV channel down * 2 TV channel down TV CH –

4 TV VOL + * 2 TV volume up

TV VOL –

5 TV MUTE

6 TV INPUT

7 1-9, 0, +10

8 TITLE

9 PRESET/CH u

PRESET/CH d

* 2 TV volume down

* 2 TV mute

* 2 TV input

Numeric buttons

Title

Up

Down

*

*

2

2 TV volume up

TV volume down

*

*

2

2

TV mute

TV input

Numeric buttons

VCR channel up

VCR channel down

PRESET/CH j

PRESET/CH i

SELECT

0 RETURN

q REC/DISC SKIP w e r

AUDIO

Left

Right

Select

Return

Disc skip

Play

Search backward

Search forward

Audio

Rec

Play

Search backward

Search forward d Pause t y a

w ENTER

e MENU

r DISPLAY

Pause

Skip backward

Skip forward

Stop

Title/Index

Menu

Display

Stop

Enter

* 3 VCR power

* 2 TV power

TV channel up

TV channel down

TV volume up

TV volume down

TV mute

TV input

Numeric buttons

* 3 VCR rec

* 3 VCR play

* 3 VCR search backward

* 3 VCR search forward

* 3 VCR pause

* 3 VCR stop

Enter

* 2

* 1 Power

TV power

* 2 TV channel up * 2

* 1 Power

* 2 TV power

TV channel up

* 2

* 1 Power

TV power

* 2 TV channel up

* 2 TV channel down * 2 TV channel down * 2 TV channel down

*

*

2

2 TV volume up

TV volume down

*

*

2

2

TV mute

TV input

Numeric buttons

* 2 TV volume up

* 2 TV volume down

* 2 TV mute

* 2 TV input

Numeric buttons

*

*

2

2 TV volume up

TV volume down

*

*

2

2

TV mute

TV input

Preset stations (1-8)

Disc skip

Play

Search backward

Search forward

Pause

Skip backward

Skip forward

Stop

Index

Display

Rec (MD)

Play

Search backward

Search forward

Pause

Skip backward

Skip forward

Stop

Index

Display

Preset up

Preset down

A/B/C/D/E

* 1

* 2

* 3

This button functions only when the original remote control of the component has POWER button.

These buttons can operate your TV without switching the input if the manufacturer code is set in D-TV/CBL.

These buttons can operate your VCR without switching the input to VCR if the manufacturer code is set in VCR.

48

0109V630_46-51_EN(U) 48 12/27/01, 7:47 PM

ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS

You can adjust the output level of each effect speaker

(center, rear left and right, rear center and subwoofer) while listening to a source.

Adjustment should be made with the remote control.

1

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

STANDBY

MD/CD-R TUNER

SYSTEM

POWER

SLEEP

DVD D-TV/CBL V-AUX 6CH INPUT

VCR 1 VCR2/DVR A AMP

+

TV VOL

TV MUTE

HALL

+

TV CH

TV INPUT

+

VOLUME

MUTE

JAZZ CLUB

ROCK

CONCERT

HALL

1

MUTE

JAZZ CLUB

2

ROCK

CONCERT

3 4

5

/DTS

SUR.

9

LEVEL

TITLE

6

SELECT

0

SELECT

7

EX/ES

+10

PRESET/CH

8

STEREO

ENTER

EFFECT

SET MENU

MENU

A/B/C/D/E

+ –

TEST

RETURN DISPLAY

REC

DISC SKIP

AUDIO

2

2

3

3 Press j / i to adjust the speaker output level.

• The control range for the center or rear left and right speakers is from +10 dB to –10 dB.

• The control range for the subwoofer is from 0 dB to –20 dB.

PRESET/CH

SELECT

+

1 Press AMP.

AMP

(While playing a source)

2 Press LEVEL repeatedly to select the speaker(s) you want to adjust.

Each time you press LEVEL, the selected speaker changes and appears on the front panel display as follows: center, rear right, rear center, rear left and subwoofer.

LEVEL

TITLE

Notes

• When the speaker output modes for “1A CENTER” and “1C

REAR LR” are set to NON, and “1E BASS” to MAIN, the output level of those speakers cannot be adjusted because there is no sound coming from these speakers.

• When you adjust the output level with LEVEL, the settings you made with the test tone will be changed.

• We recommend adjusting the speakers by following the steps described in “Using the test tone” on pages 21 and 22.

For 6ch Stereo

You can adjust the volume level for each channel in 6channel stereo mode.

Control range: 0 to 100%

CT level (Center level)

RL level (Rear left level)

RR level (Rear right level)

RC level (Rear center level)

Center speaker output level

Rear right speaker output level

Rear center speaker output level

Rear left speaker output level

1 Select 6ch Stereo.

2 Press u / d repeatedly to select the speaker(s) you want to adjust.

3 Press j / i to adjust the speaker output level.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If so, set the output level again.

Subwoofer output level

y

• Once you press LEVEL, you can also select the speaker(s) to be adjusted by pressing d / u.

PRESET/CH

LEVEL

TITLE –

SELECT

+

49

0109V630_46-51_EN(U) 49 12/27/01, 7:47 PM

ADJUSTING THE DELAY TIME

You can adjust the time difference between the beginning of the sound from the main speakers and the beginning of the sound effect from the rear speakers. The larger the value, the later the sound effect is generated. The delay time can be individually adjusted to all DSP programs.

The following table shows factory-set delay time.

Program

1.

CONCERT HALL

2.

JAZZ CLUB

3.

ROCK CONCERT

4.

DISCO

GAME

CONCERT VIDEO

5.

TV SPORTS

6.

MONO MOVIE

7.

70 mm SPECTACLE

DGTL SPECTACLE

DTS SPECTACLE

Spectacle EX/ES

70 mm SCI-FI

Sci-Fi EX/ES

DGTL SCI-FI

DTS SCI-FI

8.

70 mm ADVENTURE

DGTL ADVENTURE

DTS ADVENTURE

Adventure EX/ES

70 mm GENERAL

DGTL GENERAL

DTS GENERAL

General EX/ES

9.

PRO LOGIC/NORMAL

DOLBY DIGITAL/NORMAL

DTS DIGITAL SUR./NORMAL

Dolby D EX/DTS-ES

PRO LOGIC/ENHANCED

DOLBY DIGITAL/ENHANCED

DTS DIGITAL SUR./ENHANCED

Enhanced EX/ES

PRO LOGIC Movie

PRO LOGIC Music

5

5

5

20

15

15

15

15

5

5

5

15

5

15

15

15

20

15

15

15

20

Preset value (ms)

45

30

15

26

36

15

15

15

20

21

10

69

23

Adjustment should be made with the remote control.

1

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

MD/CD-R

STANDBY

TUNER SLEEP

DVD

D-TV/CBL V-AUX

6CH INPUT

VCR 1 VCR2/DVR

A

AMP

+

TV VOL

TV MUTE

+

TV CH

TV INPUT

HALL JAZZ CLUB

+

VOLUME

MUTE

ENTER-

TAINMENT

MUTE

HALL

1

TV

SPORTS

5

/DTS

SUR.

9

JAZZ CLUB

2

MONO

MOVIE

6

3

ENTER-

TAINMENT

4

MOVIE

THEATER 1

7

MOVIE

THEATER 2

8

SELECT

0

EX/ES

+10

LEVEL

TITLE

PRESET/CH

SELECT

STEREO

ENTER

EFFECT

SET MENU

MENU

A/B/C/D/E

+ –

TEST

RETURN DISPLAY

REC

DISC SKIP

AUDIO

2

3

4

1 Press AMP.

AMP

(While playing a source)

2 Select a DSP program you want to adjust the delay time.

3 Press u / d so that “DELAY” appears on the front panel display.

PRESET/CH

SELECT

+

DELAY

4 Press j / i to adjust the delay time.

Notes

• Adding too much delay will cause an unnatural effect with some sources.

• The sound is momentarily interrupted while adjusting the delay time.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However, if the power cord is disconnected from the AC outlet, or the power supply is cut for more than one week, the stored data will be lost. If so, adjust the delay time again.

50

0109V630_46-51_EN(U) 50 12/27/01, 7:47 PM

ADJUSTING THE PARAMETER SETTINGS FOR PRO LOGIC MUSIC

Changing parameter settings

You can adjust the values of PRO LOGIC Music parameters so the sound fields are recreated accurately in your listening room.

Adjustments should be made with the remote control.

1

CODE SET TRANSMIT

POWER

TV

CD

POWER

AV

STANDBY

MD/CD-R TUNER

SYSTEM

POWER

SLEEP

DVD D-TV/CBL V-AUX

6CH INPUT

VCR 1 VCR2/DVR A AMP

+

TV VOL

TV MUTE

+

TV CH

TV INPUT

HALL JAZZ CLUB

+

VOLUME

MUTE

MUTE

HALL

1

TV

SPORTS

5

JAZZ CLUB

2

MONO

MOVIE

6

3 4

MOVIE

THEATER 1

7

MOVIE

THEATER 2

8

9

SELECT

0

EX/ES

+10

LEVEL

TITLE

PRESET/CH

SELECT

STEREO

ENTER

EFFECT

SET MENU

MENU

A/B/C/D/E

+ –

TEST

RETURN DISPLAY

REC

DISC SKIP

AUDIO

2

3

4

Note

• You cannot change parameter values when “10 MEM.

GUARD” on the SET MENU is set to ON.

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the parameter value you edited will return to the factory setting. If so, edit the parameter value again.

1 Press AMP.

2 Select PRO LOGIC Music.

/DTS

SUR.

9

SELECT

0

3 Press u / d to select the parameter.

4 Press j / i to change the parameter value.

AMP

PRESET/CH

SELECT

PRESET/CH

SELECT

+

+

PRO LOGIC Music parameter descriptions

PANORAMA

Function:

Choices:

Turning the function on extends the front stereo image to include the surround speakers for wraparound effect.

OFF/ON, initial setting is OFF.

DIMENSION

Function: Gradually adjusts the soundfield either towards the front or towards the rear.

Control range: –3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).

CT WIDTH (Center width)

Function: Adjusts the center image from all three front speakers to varying degrees. The larger the value, adjusts the center image towards the main left and right speakers.

Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only from main left and right speakers), initial setting is 3.

5 Repeat steps 3 and 4 above as necessary to change other parameters.

12/29/01, 3:52 PM

51

0109V630_46-51_EN(U) 51

TROUBLESHOOTING

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center.

General

Problem

This unit fails to turn on when STANDBY/

ON (or SYSTEM

POWER) is pressed, or enters in the standby mode soon after the power has been turned on.

No sound.

The picture does not appear.

Cause Remedy

The power cord is not connected or the plug is not completely inserted.

The IMPEDANCE SELECTOR switch on the rear panel is not fully set to either the left or right position.

The protection circuitry has been activated.

Digital signals which this unit cannot reproduce are being input to this unit by playing a CD-ROM, etc.

The output and input for the picture are connected to different types of video jacks.

Firmly connect the power cord.

Set the switch fully to the left or right position when this unit is in the standby mode.

This unit has been exposed to a strong external electric shock (such as lightning and strong static electricity).

Incorrect input or output cable connections.

An appropriate input source has not been selected.

The speaker connections are not secure.

The main speakers to be used have not been selected properly.

The volume is turned down.

The sound is muted.

Make sure all speaker wire connections on this unit and on all speakers are secure and that the wire for each connection does not touch anything other than its respective connection.

Set this unit in the standby mode, disconnect the power cord, plug it back in after 30 seconds, then start operating.

Connect the cables properly. If the problem persists, the cables may be defective.

Select an appropriate input source with INPUT l

/ h or 6CH INPUT (or the input selector buttons).

Secure the connections.

Select the main speakers with SPEAKERS A and/or

B.

Turn up the volume.

Press MUTE or any operation buttons of this unit to cancel a mute and adjust the volume.

Play a source whose signals this unit can reproduce.

Make connections using the same type of video jacks (S VIDEO, VIDEO (composite), or

COMPONENT VIDEO) for both the input and output.

Refer to page

12

10, 11

10 – 16

23

10, 11

23

24

14, 15

52

0110V630_52-58_EN(U) 52 12/27/01, 7:47 PM

TROUBLESHOOTING

Problem

The sound suddenly goes off.

Only the speaker on one side can be heard.

No sound from the effect speakers.

No sound from the center speaker.

No sound from the rear speakers.

No sound from the subwoofer.

Poor bass reproduction.

Cause Remedy

The protection circuit has been activated because of a short circuit, etc.

The sleep timer has functioned.

The sound is muted.

Incorrect cable connections.

Incorrect setting of “5 L/R BALANCE” on the SET MENU.

The sound effect is off.

A Dolby Surround, Dolby Digital or

DTS decoding DSP program is being used with material not encoded with

Dolby Surround, Dolby Digital or DTS.

A 96-kHz sampling digital signal is being input to this unit.

The output level of the center speaker is set to minimum.

“1A CENTER” on the SET MENU is set to NON.

One of the Hi-Fi DSP programs (1 to 4) has been selected (except for 6ch Stereo).

The source encoded with a Dolby Digital or DTS signal does not have a center channel signal.

The output level of the rear speakers is set to minimum.

A monaural source is being played with program 9.

“1E BASS” on the SET MENU is set to

MAIN when a Dolby Digital or DTS signal is being played.

“1E BASS” on the SET MENU is set to

SWFR or MAIN when a 2-channel source is being played.

The source does not contain low bass signals (90 Hz and below).

“1E BASS” on the SET MENU is set to

SWFR or BOTH and your system does not include a subwoofer.

The speaker mode settings (main, center, rear, or rear center) on the SET MENU does not match your speaker configuration.

Check the IMPEDANCE SELECTOR switch is set to the appropriate position and then turn this unit back on.

Check the speaker wires are not touching each other and then turn this unit back on.

Turn on the power, and play the source again.

Press MUTE or any operation buttons of this unit to cancel a mute and adjust the volume.

Connect the cables properly. If the problem persists, the cables may be defective.

Adjust it to the appropriate position.

Press STEREO/EFFECT to turn it on.

Select another DSP program.

Raise the level of the center speaker.

Select the appropriate mode for your center speaker.

Select another DSP program.

Raise the output level of the rear speakers.

Select another DSP program.

Select SWFR or BOTH.

Select BOTH.

Select MAIN.

Select the appropriate position for each speaker based on the size of the speakers in your configuration.

Refer to page

12

10, 11

44

28

26 – 33

49

41

26 – 33

49

26 – 33

42

42

42

41 – 43

53

0110V630_52-58_EN(U) 53 12/27/01, 7:47 PM

TROUBLESHOOTING

Problem Cause Remedy

No sound from the rear center speaker.

“1C REAR LR” or “1D REAR CT” on the SET MENU is set to NON.

The Dolby Digital EX decoder or the

DTS-ES compatible decoder is not on.

Incorrect cable connections.

A “humming” sound can be heard.

The volume level cannot be increased, or the sound is distorted.

The sound effect cannot be recorded.

A source cannot be recorded by a digital recording component connected to the

DIGITAL OUTPUT jack of this unit.

The component connected to the OUT

(REC) jacks of this unit is turned off.

It is not possible to record the sound effect by a recording component.

A source component is not connected to the DIGITAL INPUT jacks of this unit.

The sound field parameters and some other settings on this unit cannot be changed.

This unit does not operate properly.

“10 MEM. GUARD” in the SET MENU is set to ON.

The internal microcomputer has been frozen by an external electric shock (such as lightning or excessive static electricity) or by a power supply with low voltage.

“CHECK SP WIRES” appears on the front panel display.

There is noise interference from digital or high-frequency equipment, or this unit.

Speaker cables are short circuited.

This unit is too close to the digital or high-frequency equipment.

This unit suddenly turns into the standby mode.

The internal temperature becomes too high and the overheat protection circuitry has been activated.

Select LRG or SML.

Press the EX/ES button on the remote control to turn it on.

Firmly connect the audio plugs. If the problem persists, the cables may be defective.

Turn on the power to the component.

Connect the source component to the DIGITAL

INPUT jacks of this unit.

Set “10 MEM. GUARD” in the SET MENU to

OFF.

Disconnect the AC power cord from the outlet and then plug it in again after about 30 seconds.

Make sure all speaker cables are connected correctly.

Move this unit further away from such equipment.

Wait until this unit cools down and then turn it back on.

Refer to page

42

28

10 – 16

54

0110V630_52-58_EN(U) 54 12/27/01, 7:47 PM

TROUBLESHOOTING

Tuner

Problem Cause Remedy

FM stereo reception is noisy.

The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor.

Check the antenna connections.

Try using a high-quality directional FM antenna.

Use the manual tuning method.

Adjust the antenna position to eliminate multipath interference.

FM

There is distortion, and clear reception cannot be obtained even with a good FM antenna.

There is multipath interference.

The station is too weak.

The desired station cannot be tuned in with the automatic tuning method.

Previously preset stations can no longer be tuned in.

This unit has been disconnected for a long period.

The signal is weak or the antenna connections are loose.

AM

The desired station cannot be tuned in with the automatic tuning method.

There are continuous crackling and hissing noises.

There are buzzing and whining noises

(especially in the evening).

Noises result from lightning, fluorescent lamps, motors, thermostats and other electrical equipment.

A TV set is being used nearby.

Use a high-quality directional FM antenna.

Use the manual tuning method.

Re-store the stations.

Tighten the AM loop antenna connections and orient it for best reception.

Use the manual tuning method.

Use an outdoor antenna and a ground wire.

This will help somewhat, but it is difficult to eliminate all noise.

Move this unit away from the TV.

Refer to page

17

34

17

17

34

34

35, 36

17

Remote control

Problem

The remote control does not work nor function properly.

Cause Remedy

Wrong distance or angle.

Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit.

The batteries are weak.

The manufacture code has not correctly set.

The remote control will function within a maximum range of 6 m (20 feet) and no more than 30 degrees off-axis from the front panel.

Reposition this unit.

Replace all batteries with new ones.

Set the code correctly.

Try setting another code of the same manufacturer.

Even if the manufacturer code is correctly set, there are some models that do not respond to the remote control.

Refer to page

7

3

47

55

0110V630_52-58_EN(U) 55 12/27/01, 7:47 PM

GLOSSARY

Dolby Surround

Dolby Surround uses a 4 channel analog recording system to reproduce realistic and dynamic sound effects: 2 main left and right channels (stereo), a center channel for dialog (monaural), and a rear channel for special sound effects (monaural). The rear channel reproduces sound within a narrow frequency range.

Dolby Surround is widely used with nearly all video tapes and laser discs, and in many TV and cable broadcasts as well. The Dolby Pro Logic decoder built into this unit employs a digital signal processing system that automatically stabilizes the volume on each channel to enhance moving sound effects and directionality.

Dolby Digital

Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio.

With 3 front channels (left, center, and right), and 2 rear stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (low frequency effect), the system has a total of 5.1 channels (LFE is counted as 0.1 channel).

By using 2-channel stereo for the rear speakers, more accurate moving sound effects and surround sound environment are possible than with Dolby Surround. The wide dynamic range (from maximum to minimum volume) reproduced by the 5 full-range channels and the precise sound orientation generated using digital sound processing provide listeners with previously unheard of excitement and realism.

With this unit, any sound environment from monaural up to a 5.1-channel configuration can be freely selected for your enjoyment.

Dolby Digital EX creates 6 full-bandwidth output channels from 5.1-channel sources. This is done using a matrix decoder that derives 3 surround channels from the

2 in the original recording. For the best results, Dolby

Digital EX should be used with movie sound tracks recorded with Dolby Digital Surround EX.

With this additional channel, you can experience more dynamic and realistic moving sound especially with scenes with “flyover” and “fly-around” effects.

Dolby Pro Logic

Dolby Pro Logic is an improved technique used to decode vast numbers of existing Dolby Surround softwares. This new technology enables a discrete 5channel playback with 2 main left and right channels, 1 center channel, and 2 rear left and right channels (instead of only 1 rear channel for conventional Pro Logic technology). A music mode is also available for 2-channel sources in addition to the movie mode.

DTS (Digital Theater Systems)

Digital Surround

DTS digital surround was developed to replace the analog soundtracks of movies with a 6-channel digital sound track, and is now rapidly gaining popularity in movie theaters around the world. Digital Theater Systems Inc.

has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS digital surround in your home.

This system produces practically distortion-free 6-channel sound (technically, a left, right and center channels, 2 rear channels, plus an LFE 0.1 channel as a subwoofer, for a total of 5.1 channels).

The unit incorporates DTS-ES compatible decoder that enables 6.1-channel reproduction by adding the rear center channel to existing 5.1-channel format. (The rear center channel is created from rear left and right channels.)

LFE 0.1 channel

This channel is for the reproduction of low bass signals.

The frequency range for this channel is 20 Hz to 120 Hz.

This channel is counted as 0.1 because it only enforces a low frequency range compared to the full-range reproduced by the other 5 channels in a Dolby Digital or

DTS 5.1 channel systems.

CINEMA DSP

D I G I T A L

Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater having many speakers and designed for acoustic effects. Since home conditions, such as room size, wall material, number of speakers, and so on, can differ so widely, it’s inevitable that there are differences in the sound heard as well. Based on a wealth of actually measured data, YAMAHA CINEMA DSP uses

YAMAHA original sound field technology to combine

Dolby Pro Logic, Dolby Digital and DTS systems to provide the visual and audio experience of movie theater in the listening room of your own home.

SILENT CINEMA

YAMAHA has developed a natural, realistic sound effect

DSP algorithm for headphones.

Parameters for headphones have been set for each sound field so that accurate representations of all the sound field programs can be enjoyed using headphones.

56

0110V630_52-58_EN(U) 56 12/27/01, 7:47 PM

Virtual CINEMA DSP

YAMAHA has developed a virtual CINEMA DSP algorithm that allows you to enjoy DSP sound field surround effects even without any rear speakers by using virtual rear speakers.

It is even possible to enjoy virtual CINEMA DSP using a minimal 2-speaker system that does not include a center speaker.

PCM (Linear PCM)

Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using any compression. This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for sampling the size of the analog signal per very small unit of time. Standing for “pulse code modulation”, the analog signal is encoded as pulses and then modulated for recording.

Sampling frequency and number

of quantized bits

When digitizing an analog audio signal, the number of times the signal is sampled per second is called the sampling frequency, while the degree of fineness when converting the sound level into a numeric value is called the number of quantized bits.

The range of rates that can be played back is determined based on the sampling rate, while the dynamic range representing the sound level difference is determined by the number of quantized bits. In principle, the higher the sampling frequency, the wider the range of frequencies that can be played back, and the higher the number of quantized bits, the more finely the sound level can be reproduced.

GLOSSARY

S-video signal

With the S-video signal system, the video signal normally transmitted using a pin cable is separated and transmitted as the Y signal for the luminance and the C signal for the chrominance through the S-video cable. Using the S

VIDEO jack eliminates video signal transmission loss and allows recording and playback of even more beautiful images.

Component video signal

With the component video signal system, the video signal is separated into the Y signal for the luminance and the

P

B

/C

B

and P

R

/C

R

signals for the chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent. The component signal is also called the “color difference signal” because the luminance signal is subtracted from the color signal.

A monitor with component input jacks is required in order to use the component signal for output.

0110V630_52-58_EN(U) 57 12/27/01, 7:47 PM

57

SPECIFICATIONS

AUDIO SECTION

• Minimum RMS Output Power for Main, Center, Rear, Rear Center

20 Hz to 20 kHz, 0.06% THD, 8

Ω ....................................... 75 W

1 kHz, 0.06% THD, 8 Ω ........................................................ 80 W

• DIN Standard Output Power

[Europe model]

1 kHz, 0.7% THD, 4

Ω ........................................................ 125 W

• Maximum Power (EIAJ)

[China, Korea and General models]

1 kHz, 10% THD, 8

Ω ......................................................... 110 W

• Dynamic Power (IHF)

8/6/4/2

Ω .......................................................... 90/120/150/190 W

• Damping Factor

20 Hz to 20 kHz, 8

Ω ................................................... 80 or more

• Frequency Response

CD to Main L/R ...................................... 10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

20 Hz to 20 kHz, 45 W, 8

Ω, Main L/R ................................ 0.06%

• Signal to Noise Ratio (IHF-A Network)

CD (250 mV, shorted) to Main L/R, Effect Off ................. 100 dB

• Residual Noise (IHF-A Network)

Main L/R ................................................................ 150 µV or less

• Channel Separation (1 kHz/10 kHz)

CD (5.1 k

Ω terminated) to Main L/R ........................ 60 dB/45 dB

• Tone Control (Main L/R)

BASS Boost/Cut ...................................................... ±10 dB/50 Hz

TREBLE Boost/Cut ............................................... ±10 dB/20 kHz

• Phones Output ............................................................. 0.34 V/560

• Input Sensitivity

CD, etc .................................................................... 150 mV/47 k

6CH INPUT ............................................................ 150 mV/47 k Ω

• Output Level

OUT (REC) ........................................................... 150 mV/1.2 k

OUTPUT MAIN/CENTER/REAR CENTER/

REAR (SURROUND) ............................................ 2.2 V/1.2 k

OUTPUT SUBWOOFER ............................................. 4 V/1.2 k

VIDEO SECTION

• Video Signal Type ...................................................... NTSC or PAL

• Composite Video Signal Level ...................................... 1 Vp-p/75

• S-Video Signal Level

Y ................................................................................. 1 Vp-p/75

C .......................................................................... 0.286 Vp-p/75

• Component Video Signal Level

Y ................................................................................. 1 Vp-p/75

P

B

/C

B

, P

R

/C

R

............................................................. 0.7 Vp-p/75

• Signal to Noise Ratio ............................................................... 50 dB

• Frequency Response (MONITOR OUT)

Composite, S-Video ................................. 5 Hz to 10 MHz, –3 dB

Component ................................................. DC to 30 MHz, –3 dB

FM SECTION

• Tuning Range

[U.S.A. and Canada models] ............................ 87.5 to 107.9 MHz

[Other models] .............................................. 87.50 to 108.00 MHz

• 50 dB Quieting Sensitivity (IHF, 100% mod.)

Mono/Stereo ........................ 2.0

µV (17.3 dBf) /25 µV (39.2 dBf)

• Selectivity (400 kHz) ............................................................... 70 dB

• Signal to Noise Ratio (IHF)

Mono/Stereo .............................................................. 76 dB/70 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo ................................................................. 0.2%/0.3%

• Stereo Separation (1 kHz) ....................................................... 45 dB

• Frequency Response ........................... 20 Hz to 15 kHz +0.5, –2 dB

AM SECTION

• Tuning Range ......................................... 530/531 to 1710/1611 kHz

• Usable Sensitivity ............................................................. 300

µV/m

GENERAL

• Power Supply

[U.S.A. and Canada models] ............................... AC 120 V/60 Hz

[Australia model] ................................................. AC 240 V/50 Hz

[U.K., Europe and Singapore models] ................ AC 230 V/50 Hz

[Korea model] ..................................................... AC 220 V/60 Hz

[China and General models] ..... AC 110/120/220/240 V, 50/60 Hz

• Power Consumption

[U.S.A. and Canada models] .................................. 290 W/370 VA

[Other models] ..................................................................... 290 W

Standby Mode ......................................................... approx. 0.6 W

• AC Outlets

[U.S.A., Canada, Europe and Singapore models]

.......................................................... 2 (Total 100 W maximum)

[China and General models] .................. 2 (Total 50 W maximum)

[U.K. and Australia models] ......................... 1 (100 W maximum)

• Dimension (W x H x D)

.......................... 435 x 161 x 390 mm (17” x 6-7/16” x 15-3/8”)

• Weight ...................................................................... 11.5 kg (25 lbs)

• Accessories ............................................................... Remote control

Batteries

Front VIDEO AUX jack cap

75-ohm/300-ohm antenna adapter (U.K. model)

AM loop antenna

Indoor FM antenna

*Specifications are subject to change without notice.

58

0110V630_52-58_EN(U) 58 1/9/02, 7:39 PM

LIST OF MANUFACTURER CODES

LISTE DES CODES DES FABRICANTS

TV

A TANDY

ABEX

0941

1151

ADMIRA 1141

ADVENTURA 1131

AIKO

AIWA

1121

1481

AKAI

ALBA

0331, 1101, 1111

0431

ALLERON

AMBASSADOR

AMSTRAD

1091

1081

0481, 1081

ANAM 0251, 1041, 1051,

1061, 1071

ANAM NATIONAL 1041

AOC 0361, 1021, 1031,

1111, 1161

ARCHER 1161

AUDIOSONIC 1001

AUDIOVOX 1051, 1161

BAUER 0441

BAUR

BEIJING

BELCOR

1001

1511, 1551, 1561

1031

BELL & HOWELL 0981, 0991

BEON 1001

BRADFORD 1051

BROCKWOOD 1031

BROKSONIC 1161

BUSH

CANDLE

1001

0351, 0361, 0961,

CAPEHART

CARVER

CATHAY

0971, 1111, 1131

1021

0101

1001

CELEBRITY 0951

CENTURION 0411

CHANGHONG 1541, 1551, 1561,

CITIZEN

1621

0351, 0361, 0921,

0931, 0941, 0961,

0971, 1111, 1121,

1131

CLAIRTONE 1011

CLARIVOX 1001

CONCERTO 0351, 0971

CONROWA 1751

CONTEC 0901, 0911, 1011,

CORANDO

CRAIG

CROWN

1051

0941

0251, 1051

0941, 1051

CURTIS MATHES 0161, 0361,

0931, 0941,

0981, 1111

CXC

DAEWOO

1051

0291, 0301, 0331,

0721, 0941, 1001,

1031, 1121, 1191,

1531, 1581, 1591,

DANSAI

DAYTRON

DECCA

DIXI

1601

1001

0941, 1031

0271, 1001

0331, 1001, 1071

DUMONT 0891, 1031

DYNATECH 0881

ELECTROBAND

ELECTROHOME

0951, 1011

0941

ELECTRON

ELIN

ELTA

EMERSON

0941

1001

0331

0001, 0021, 0061,

0071, 0081, 0091,

0111, 0811, 0821,

0831, 0841, 0851,

0861, 0871, 0901,

0921, 0941, 0981,

ENVISION

ERRES

1011, 1031, 1051,

1081, 1091

0361, 1111

1001

ETRON 0331

FERGUSON 1001

FINLUX

FISHER

1001

0171, 0801, 0981

FORMENTI 0441

FORMONTI 1001

FORTRESS

FUJITSU

FUNAI

1141

1091

1051, 1091, 1501,

1521

FUTURETECH 1051

GE 0131, 0161, 0201,

0751, 0761, 0771,

0781, 0791, 0811,

GEC

GEMINI

GENEXXA

0861, 1041

0271, 1001

0391

0431

GIBRALTER 0891, 1031, 1111

GOLDSTAR 0031, 0121, 0351,

0411, 0731, 0741,

0861, 0941, 0971,

1001, 1031, 1111,

1151

GOODMANS/TASHIKO

0271, 0661, 1001

GRANADA

GRUNDIG

1001

1781, 1791, 1801,

1811, 1821, 1831,

1841, 1851, 1861,

GUNPY

1871, 1881

1051, 1091

HARMAN/KARDON 0721

HALLMARK 0861

HANSEATIC 1001

HARVARD 1051, 1061

HINARI

HITACHI

1001, 1091

0181, 0351, 0671,

0681, 0691, 0701,

0711, 0871, 0941,

HYPSON

IMA

INDIANA

0971, 1351

1001

1051

1001

INFINITY REFERENCE

0101

INTERFUNK 1001

ITT 0611

JANEIL

JBL

JCB

JENSEN

JINXING

1131

0101

0951

0311

1531, 1541, 1551,

1561, 1571, 1621,

1631, 1641, 1651,

1691, 1731

JVC (VICTOR) 0261, 0281, 0641,

0651, 0661, 0841

KAWASHO

KAYPANI

0901

1021

KENWOOD

KLOSS

KTV

0361, 1031, 1111

0631, 0721, 1131

0921, 0941, 1011,

LEYCO

1051, 1111

1001

LIESENK & TTER 1001

LLOYTRON 0941

LOEWE 1001

LOGIK

LUXMAN

LXI

0991, 1771

0351, 0971

0101, 0621, 0761,

0861, 0981

MAGNAVOX 0101, 0341, 0391,

0401, 0411, 0421,

0581, 0591, 0601,

MAJESTIC

MARANTZ

0611, 0631, 0661,

0961, 1111

0991

0101, 0221, 0361,

MARK

MATSUI

1001, 1111

1001

0271, 0331, 1001

MEDIATOR 1001

MEGATRON 0691, 0861, 1161

MEI

MEMOREX

1011

M-ELECTRONIC 1001

0331, 0571, 0861,

0971, 0981, 0991,

1771

METZ

MGA

MIDLAND

1791, 1831, 1891,

1901, 1911, 1921,

1931, 1941

0361, 0561, 0571,

0861, 1031, 1111

0751, 0761, 0891,

0941, 1151

MITSUBISHI 0221, 0321, 0561,

0571, 0661, 0861,

1031, 1101, 1381

MONTGOMERY 1091

MOTOROLA 1041, 1141

MTC 0351, 0361, 0881,

0931, 0971, 1011,

NEC

1031, 1111

MULTITECH 0881, 1051

NAD 0551, 0621, 0861

0241, 0351, 0361,

0661, 0971, 1031,

NECKERMANN

1111, 1321, 1711

1001

NEI

NIKKAI

1001

0271, 0431, 1001,

1151

NIKKO 0861, 1111, 1121

NOVABEAM 0721

NTC

ONWA

OPTIMUS

OPTONICA

ORION

1121

1051

0551

0541, 1141

0831, 1001

OSAKI 0271, 1151

OTTO VERSAND 1001

PANASONIC 0101, 0191, 0251,

PANDA

0751, 1041, 1311,

1371, 1431

1541, 1721

PENNY 0161, 0361, 0521,

0531, 0621, 0731,

0751, 0761, 0781,

0791, 0861, 0931,

0941, 1031, 1041,

PEONY

PHILCO

PHILIPS

PHONOLA

PILOT

1111, 1151, 1161

1561, 1621

0361, 0581, 0591,

0601, 0611, 0631,

0961, 1031, 1111

0101, 0401, 1001

1001

0941, 1031, 1111

PIONEER 0511, 0551, 0871

PORTLAND 0941, 1031, 1121

PRICECLUB 0931

PRISM 0751

PROSCAN

PROTECH

PROTON

0761

1001

0501, 0861, 0941,

1021, 1161

PULSAR

PULSER

RADIOLA

RCA

0891

1031

QUASAR

QUELLE

RADIO SHACK

0251, 0751, 1041

1001

0541, 0941,

1031, 1051,

1151

1001

0051, 0141, 0151,

0181, 0411, 0491,

0531, 0761, 0771,

0871, 1031

REALISTIC 0541, 0861, 0941,

0971, 0981, 1031,

1051, 1111, 1151

RHAPSODY 1011

R-LINE

RUNCO

SAISHO

SAMPO

SAMSUNG

1001

0891, 1111

0331, 1081

0361, 0941, 1021,

1111, 1151

0331, 0341, 0351,

0361, 0861, 0931,

0941, 0971, 1001,

SAMSUX

SANYO

SBR

SCHEIDER

SCIMITSU

SCOTCH

SCOTT

SEARS

1031, 1111, 1151

0941

0171, 0231, 0271,

0661, 0801, 0911,

0981, 1231, 1251,

1261

1001

1001

1031

0861

0831, 0861, 0941,

1031, 1051, 1091

0101, 0161, 0171,

0351, 0481, 0521,

0621, 0761, 0801,

0861, 0971, 0981,

1091

SHANGHAI 1561, 1681

SHARP 0461, 0471, 0541,

0661, 0911, 0941,

SHOGUN

1141

1031

SIGNATURE 0991, 1771

SIMPSON 0581, 0961

SOLAVOX

SONOKO

1151

1001

I

02V630_code(U) 1 12/27/01, 7:47 PM

II

02V630_code(U)

SONTEC

SONY

1001

0371, 0451, 0661,

0841, 0951, 1281,

1441

SOUNDESIGN 0861, 0961, 1051,

1091

SOUNDWAVE 1001

SPECTRICON 1161

SQUAREVIEW 0481

SSS

STAR-LITE

1031, 1051

1051

SUPREM 0951

SUPRE-MACY 1131

SURPA

SYLVANIA

0351, 0971

0101, 0361, 0441,

0581, 0591, 0601,

0611, 0631, 0961,

1111

SYMPHONIC 0481

SYSLINE 1001

TANDY

TATUNG

0271, 0431, 1141

0271, 0881, 1001,

1041, 1161

TCL

TECHNICS

1561, 1631, 1701

0751

TECHWOOD 0351, 0751, 0971

TEKNIKA 0101, 0351, 0571,

0931, 0941, 0961,

TELETECH

TERA

THAKRAL

THORM

TMK

TOSHIBA

0971, 0991, 1031,

1051, 1091, 1121,

1131, 1771

0331

0501

1671

1001

0351, 0861, 0971,

1081

0381, 0521, 0621,

0661, 0931, 0981,

TOSONIC

1301

1011

TOTEVISION 0941

TRICAL 0911

UNIVERSAL 0781, 0791

UNIVERSUM 1001

VECTOR RESEARCH

0361, 1111

VESTEL 1001

VIDEO CONCEPT 1101

VIDIKRON

VIDTECH

0101, 0211

0861, 1031

VIKING

WARDS

1131

0101, 0361, 0451,

0541, 0581, 0591,

0601, 0611, 0771,

0781, 0791, 0861,

0971, 0991, 1031,

WATSON

XOGEGO

YAMAHA

YOKO

ZENITH

ZONDA

1091, 1111, 1771

1001

1611, 1621, 1661,

1741, 1761

0361, 1031, 1111

1001

0011, 0041, 0891,

0991, 1771

1161

CABLE TV

ABC 0256, 0376

ANTRONIX 0136

ARCHER

BBT

0136, 0286

0076

CABLETIME 0166

CABLEVISION

COLOUR VOICE

COMTRONICS

0196

0306, 0346

0216, 0276

EAGLE COMTRONICS

0276

EASTERN

ELECTRICORD

0066

0206

ELECTUS

GE

0266

0116, 0126

GEC CABLE SYSTEM

0196

HAMLIN H5 0676

HAMLIN H6 0666

HAMLIN H6S 0656

HAMLIN H8 0646

HAMLIN H9 0636

JERROLD 0256

JERROLD 400L

JERROLD 450L

0626

0616

JERROLD 550

JERROLD OSD CATV

0606

0596

JERROLD SPRUCER

0436

MAGNAVOX/PHILIPS

MAMM

MEMOREX

0416, 0426

0296

0386

MOVIE TIME 0146, 0206

NORTHCOAST

NSC 0146

0016

OAK 0106

OAK SIGMA 450 0546

OAK SIGMA 550 0536

PANASONIC TZ 120/130

0476

PANASONIC TZ 170/180

0446

PANASONIC TZ140 0466

PANASONIC TZ150/160

0456

PARAGON

PHILIPS

0386

0036, 0216, 0306,

0316, 0326, 0336,

0346

PIONEER

PIONEER BR50

0006, 0086

0846

PIONEER BR60/70/80/81/82

0696

PIONEER BR90

PULSAR 0386

0556

RCA DIGITAL SATELLITE

SYSTEM 0396, 0406

REALISTIC 0136

REGENCY/EASTERN 0686

RUNCO

SAMSUNG

0386

0276

SCIENTIFIC ATLANTA 175/475

0576

SCIENTIFIC ATLANTA 75

0366, 0586

SCIENTIFIC ATLANTA 8650

0566

SIGNAL

SL MARX

0276

0276

SPECTAVISION 0236

STANDARD COMPONENTS

0186

STARCOM V 0256

STARGATE 0276

SYLVANIA/TEXSCAN

0376, 0496

TEKNIKA

TELESERVICE

0176

0056

TELEVIEW

TEXSCAN

TFC

0276

0186, 0376

0026

TOCOM 0226, 0356

TOCOM 5503A 0526

TOCOM 5503VIP/5507 0516

TOCOM TC56 0506

TOSHIBA

TUDI

UNIKA

0386

0046

0136

UNIVERSAL 0136, 0156, 0206,

0286

VIDEOWAY

VIEWSTAR

ZENITH

0096

0216

0246, 0386, 0486

SATELLITE TUNER

ALPHA STAR 0826

CHAPARRAL 0756

ECHOSTAR 0836

GENERAL INSTRUMENT

HTS

0776, 0876

0836

HUGHES NETWORK SYSTEMS

JERROLD

0816

0776, 0786

PANASONIC 0806

PRIMESTAR 0776, 0786

RCA

SONY

0766

0796

(DBS)

HITACHI 0856

MAGNAVOX 0886

MEMOREX 0886

PANASONIC 0896

PHILIPS 0886

SONY 0906

STAR CHOICE 0876

TOSHIBA

UNIDEN

0866, 0916

0886

VCR

A TANDY

ADVENTURA 0992

AIKO 0982

AIWA

AKAI

0902

0992

0262, 0942, 0952,

0962, 0972

AMERICAN HIGH 0932

AMSTRAD 0992

ASA 0002, 0912

ASHA 0922

AUDIO DYNAMICS 0202

AUDIOVOX 0912

BEAUMARK 0922

BELL & HOWELL 0902

BLAUPUNKT 0412

BROKSONIC 0872, 0882, 0892

BUSH

CALIX

CANON

CCE

CITIZEN

COLT

CRAIG

0852

0912

0862, 0932

0852, 0982

0912, 0982

0852

0832, 0842, 0852,

0912, 0922

CURTIS MATHES 0662, 0822,

0932

CYBERNEX 0922

DAEWOO 0802, 0812, 0982

DBX 0202

DYNATECH 0472, 0992

ELECTROHOME 0912

ELECTROPHONIC 0912

EMEREX

EMERSON

0792

0072, 0132, 0142,

0152, 0162, 0172,

0182, 0192, 0212,

0702, 0712, 0722,

0732, 0742, 0752,

0762, 0772, 0782,

0872, 0882, 0892,

0912, 0952, 0992,

1072

FINLUX

FISHER

FUJI

FUNAI

GARRARD

GE

0002, 0992

0682, 0692, 0842,

0902

0672, 0932

0992

0992

0662, 0822, 0932

GO VIDEO 0642, 0652

GOLDSTAR 0082, 0632, 0912

GOODMANS 0402

GRADIENTE 0992

GRANDA 0612, 0902

GRUNDIG 0002

HARLEY DAVIDSON

0992

HARMAN/KARDON

0632, 1082

HARWOOD 0752, 0852

HEADQUARTER 0612

HI-Q

HINARI

HITACHI

0842

0852

0102, 0562, 0572,

0582, 0592, 0602,

0992

ITT 0942

JVC (VICTOR) 0202, 0522, 0532,

0542, 0552

KENWOOD

KLH

KODAK

LLOYD

LOGIK

0202, 0542, 0612,

0632, 0902

0852

0912, 0932

0992

0852

LUXOR

LXI

0942

0022, 0912

MAGNAVOX 0002, 0482, 0492,

MAGNIN

MARANTZ

0502, 0512, 0932

0922

0002, 0202, 0402,

MARTA

0632, 0932

0912

MATSUSHITA 0932

MATSUI

MEI

MEMOREX

0722

0222, 0932

0232, 0242, 0472,

0512, 0612, 0842,

0902, 0912, 0922,

0932, 0992

MGA 0762, 0952

MGA TECHNOLOGY

0922

MINOLTA 0592, 0602

MITSUBISHI 0452, 0462, 0542,

0762, 0952, 1082

MOTOROLA 0472, 0932

MTC 0922, 0992

2 12/27/01, 7:47 PM

MULTITECH 0852, 0992

NAD 0442

NEC 0122, 0202, 0292,

0422, 0432, 0542,

NIKKO

NOBLEX

OLYMPUS

OPTIMUS

0632

0912

0922

0412, 0932

0442, 0472, 0912

OPTONICA

ORION

0402

0212, 0722, 0742,

OSAKI

0772

0912

PANASONIC 0012, 0052, 0092,

0222, 0372, 0382,

0392, 0412, 0932

PENNY

PENTAX

PERDIO

PHILCO

PHILIPS

0202, 0432, 0602,

0632, 0692, 0912,

0922, 0932

0592, 0602

0992

0002, 0932

0002, 0282, 0402,

0492, 0932

0912 PILOT

PIONEER

PROSCAN

0442, 0542

1002, 1012, 1022,

1032, 1042, 1052,

PULSAR

QUARTER

QUARTZ

1062

0512

0612

0272, 0612

QUASAR

RADIO SHACK

RADIX

0382, 0392, 0932

0912, 0992

0912

RANDEX

RCA

0912

0112, 0382, 0392,

REALISTIC

RICOH

SAISHO

0482, 0592, 0602,

0662, 0822, 0942

0402, 0472, 0612,

0682, 0842, 0902,

0912, 0922, 0932,

0992

0352, 0362

0212, 0582, 0722,

SALORA

SAMSUNG

SANKY

SANSUI

SANYO

SBR

SCHEIDER

SCOTT

0732, 0742, 0772

0612, 0762

0212, 0312, 0922,

0962

0472, 0512

0292, 0542, 0832

0242, 0612, 0842,

0902, 0922

0002, 0282

0852

0342, 0712, 0762,

0872, 0882, 0892

SEARS

SHARP

SHINTOM

SHOGUN

SINGER

SONY

0302, 0592, 0602,

0612, 0682, 0692,

0842, 0902, 0912,

0932

0402, 0472

0852

0922

0852

0032, 0332, 0352,

0362, 0672, 0792,

0932

0602 STS

SUNPAK

SYLVANIA

0352

0002, 0492, 0502,

0762, 0932, 0992

SYMPHONIC 0992

TANDY

TASHIKO

0992

0712, 0992

TEAC

TECHNICS

TEKNIKA

0992

0932

0322, 0912, 0932,

0992

TELEFUNKEN 0252

TMK 0212, 0732, 0772,

TOSHIBA

0922

0062, 0302, 0342,

0622, 0682, 0712,

0762

TOTEVISION 0912, 0922

UNITECH 0922

VECTOR RESEARCH

0202, 0432, 0632

VIDEO CONCEPTS

0202, 0432, 0632,

WARDS

0952

0322, 0402, 0472,

YAMAHA

ZENITH

0482, 0602, 0712,

0842, 0852, 0922,

0932, 0992

0202, 0632

0042, 0362, 0512,

0672

DVD PLAYER

AKAI

DENON

0058

0188

HITACHI 0198

JVC (VICTOR) 0088, 0178

KENWOOD 0148

MAGNAVOX 0128

MITSUBISHI 0138

ONKYO 0068, 0128

PANASONIC 0028

PHILIPS 0098, 0128

PIONEER 0108, 0118

PROSCAN

RCA

SAMSUNG

SHARP

SONY

TECHNICS

THOMSON

TOSHIBA

YAMAHA

ZENITH

0158

0158

0078

0038

0018

0028

0168

0048, 0128

0008, 0028, 0098

0128

LD PLAYER

AIWA 0157

DENON 0147

DISCO VISION 0017

FUNAI 0157

HITACHI (E) 0017

KENWOOD 0087, 0107

MAGNAVOX 0027

MARANTZ 0027

MITSUBISHI 0137

NAD 0137

PANASONIC 0077, 0177

PHILIPS 0027

PIONEER

RCA

REALISTIC

SHARP

SONY

VICTOR

YAMAHA

0017, 0037, 0137

0167

0157

0127

0047, 0057, 0117

0097

0007, 0067

CD PLAYER

ACOUSTIC RESEARCH

1295

ADC

ADCOM

0025, 0065

0205, 0255, 1015

ADS

AIWA

0265

0295, 0945, 1035,

AKAI

ALPINE

1055

0175, 0485, 0535

1215, 1305

AUDIO-TECHNICA 0545

BSR 0245, 0655, 0775

CALIFORNIA AUDIO LAB

0055

CAPETRONIC 1205

CARRERA

CARVER

0245

0285, 1135

CASIO

CROWN

0345

0185

CURTIS MATHES 0345

DENON 0275, 0875, 0885

DEUAL (E) 0505

DYNAMIC BASS (H)

EMERSON

EROICA

FISHER

0555

0205, 0325, 1105

1275

0095, 0555, 0925,

GARRARD

GENEXXA

1005

0365

0305, 0325, 1105

GOLDSTAR 1135, 1225, 1265,

1335

HARMAN/KARDON 0105, 0175,

HITACHI

INKEL

0815

0115, 0395

JVC (VICTOR) 0315

KENWOOD

0465, 0995

0195, 0205, 0505,

0045, 0095, 0405,

0585, 0725, 0735,

0745, 0755, 0895

KYOCERA

LUXMAN

0025

0075, 0425, 0675,

0705, 0715, 0985

MAGNAVOX 0165, 0215, 0645,

MARANTZ

0955

0215, 0235, 0375,

0785, 1345

0355, 1085 MCINTOSH

MCS

MEMOREX

0905, 1315

0205, 0225, 0235,

MGA

MISSION

0305, 0325, 1105

0135

0215

MITSUBISHI 0135, 0445

MTC

NAD

1255

0035, 0615, 0685,

0695

NAKAMICHI 0125, 0435, 0515

NEC

NIKKO

ONKYO

0255, 0905, 0965

0545, 1005

0155, 0455, 0495,

0805, 1155

OPTIMUS

0865, 0895, 0935

PANASONIC 0055, 0825, 1095,

PENNY

PHILIPS

0225, 0245, 0555,

0595, 0845, 0855,

1125

0905

0165, 0215

0305, 0935, 1045 PIONEER

PROTON

QUASAR

RCA

0215, 1185

0055

0205, 0915, 1115

REALISTIC

REVOX

ROTEL

0205, 0225, 0235,

0325, 0555, 0845

1175

0215

SABA TELECOMMANDER (E)

0505

SAE

SAMSUNG

SANSUI

0215

1285

0215, 0625, 0975,

SANYO

1025, 1105

0145, 0555, 0635,

0765

0325, 1105 SCOTT

SEARS

SHARP

0345

0235, 0665, 0895,

1065, 1075

SHERWOOD 0115, 0235, 0395,

0475

SIEMENTS GARRARD

1245

SIGNATURE 0175

SONTEC

SONY

1165

0065, 0565, 0865,

STARON

STS

1145

1235

0025

SYLVANIA 0215

SYMPHONIC 0335

TANDY 0305

TANGBERG 1195

TEAC 0235, 0335, 0385,

0525, 0795, 0835,

1355

TECHNICS 0055, 0605, 1095

TECHWOOD 1325

TELEFUNKEN (E) 0505

THOMSON (E) 0505

TOSHIBA 0035, 0685

VECTOR RESEARCH

WARDS

YAMAHA

0065, 1135

0175

0005, 0015, 0085,

0415, 0545, 0575,

1065

CD RECORDER/CD-

RW

HITACHI 0474

JVC (VICTOR) 0504

MARANTZ

PHILIPS

PIONEER

YAMAHA

0484, 0494

0444

0454, 0464

0414

MD RECORDER

KENWOOD

PIONEER

SHARP

SONY

YAMAHA

0384

0424

0434

0394

0024, 0394, 0404

III

02V630_code(U) 3 12/27/01, 7:47 PM

TAPE DECK

AIWA

AKAI

CARVER

DENON

0094, 0214, 0224

0184

0094

0304

FISHER

GARRARD

0144

0194, 0204

JVC (VICTOR) 0274, 0284, 0294

KENWOOD 0124, 0134, 0154,

0234, 0244, 0264

MAGNAVOX 0094

MARANTZ 0094, 0344

MITSUBISHI 0184

OPTIMUS 0034, 0064, 0204,

0334

ONKYO

PHILIPS

PIONEER

REVOX

SANSUI

SHARP

0364, 0374

0094

0034, 0044, 0064

0354

0094, 0344

0264

SHERWOOD 0334

SONY 0054, 0084, 0324

TEAC

TECHNICS

0194, 0254

0074, 0314

WARDS

YAMAHA

0034

0004, 0014, 0104,

0114, 0164, 0174,

0264

IV

02V630_code(U) 4 12/27/01, 7:47 PM

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Malaysia V874820

03V630(U)-cv4 1 12/27/01, 7:47 PM

advertisement

Key Features

  • - Delivers powerful and clear sound for an immersive audio experience.
  • - Supports various audio formats, including Dolby Digital, DTS, and Pro Logic IIx.
  • - Multiple HDMI inputs and outputs for easy connectivity with various devices.
  • - Compact design that fits easily into any entertainment system.
  • - Provides multiple listening modes to optimize the sound for different content types.
  • - Easy-to-use remote control for convenient operation.

Related manuals

Frequently Answers and Questions

How many HDMI inputs does RX-V630 have?
It has 4 HDMI inputs.
Can it handle 4K video pass-through?
Yes, it supports 4K pass-through.
Does it support Bluetooth connectivity?
No, it does not have Bluetooth connectivity.
What is the power output of each channel?
It provides 75 watts per channel.
Can I control it with a smartphone app?
No, it does not have a dedicated smartphone app for control.
Download PDF

advertisement

Table of contents