HPE ProLiant BL460c Gen9 Server Blade

QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade - Carrier Grade
Supplement
Overview
HPE ProLiant BL460c Gen9 Server Blade - NEBS (GR-63 & GR-1089) and ETSI 300 386-2
Certified
1.
2.
3.
4.
5.
6.
HPE ProLiant BL460c Gen9 Server Blade – Internal View
FlexibleLOM adapter
7. USB 3.0 and TPM
Nand Flash & Micro SD
8. Embedded SATA Connector
Mezzanine Slots (x16 PCI 3.0)
9. Solid State Device Connector
Sixteen (16) DDR4 DIMM memory slots (8 per processor)
10. Two hot-plug drive bays
Up to two (2) Intel® Xeon® E5-2600 v3 family processors
11. HPE Smart Array P244br Controller with 1GB FBWC
HPE BLc 12W Smart Storage Battery connector
12. iLO Management Engine
What's New
•
•
•
•
Flexible Controller Options
Support for 2133MHz DDR4 memory
Support for 12Gb SAS internal hard drives and 12Gb SAS storage controller offerings
Support for the Intel E5-2600 v3 Product Family
Page 1
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
NOTE: This document covers the HPE ProLiant BL460c Gen9 server blade only. For information on HPE BladeSystems c-Class
Enclosures and HPE BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HPE BladeSystem c-Class Enclosures QuickSpecs:
• HPE BladeSystem c3000 Enclosure QuickSpecs at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04123379
NOTE: The c3000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c7000 Enclosure QuickSpecs at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04229580
NOTE: The c7000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c-Class Interconnect and Mezzanine Components at
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For optimal cooling and system performance the BL460c Gen9 Server Blade requires the c7000 enclosure to be
configured with 10 fans and the c3000 enclosure to be configured with 6 fans.
NOTE: For proper BladeSystem operation, the minimum required versions of HPE Onboard Administrator and HPE Virtual
Connect are required and available via the HPE Service Pack for ProLiant, please see http://www.hp.com/go/spp/download.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: The following Processors are considered NEBS certified, either by testing or Compliant by Similarity
Processor
One of the
following
depending on
Model
E5-2600 v3 series Processors
HPE BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W)
HPE BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W)
HPE BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W)
HPE BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W)
HPE BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W)
HPE BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W)
HPE BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W)
HPE BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W)
NOTE: DIMM slots 4 and 5 are not accessible when either the E5-2699 v3, the E5-2697 v3, the E5-2643 v3,
the E5-2637 v3, or the E5-2667 v3 is used. In a 2 processor configuration, there are twelve (12) total
available DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above, please reference the
'Memory Speed by Processor Model' table in the Memory section of the QuickSpecs.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency when using Intel® Turbo Boost Technology. The
frequency boost increment is dependent on the processor SKU and the number of active cores. In general, a
higher boost increment is obtained when fewer cores are active.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on
the quantity and type of DIMMs installed.
NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported.
Page 2
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
NOTE: For the Intel® C610 Chipset E5-2600 v3 Series, the letter preceding the model number indicates the
Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 =
Processor SKU, and x = L for low power SKUs.
NOTE: The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must be installed in
processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A processor must be
installed in processor slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies except the E52603 v3 and E5-2609 v3.
NOTE: The letter "L" following the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the maximum speed memory
can operate. Please see the see the "Memory" section later in this document.
Cache Memory
One of the
following
depending on
Model
45MB (1x45MB) L3 cache
NOTE: For Eighteen-core processors.
40MB (1x40MB) L3 cache
NOTE: For Sixteen-core processors.
35MB (1x35MB) L3 cache
NOTE: For Fourteen-core processors.
30MB (1x30MB) L3 cache
NOTE: For Twelve-core processors.
25MB (1x25MB) L3 cache
NOTE: For Ten-core processors.
20MB (1x20MB) L3 cache
NOTE: For Six or Eight-core processors.
15MB (1x15MB) L3 cache
NOTE: For Quad or Six-core processors.
10MB (1x10MB) L3 cache
NOTE: For Quad-core processors.
Chipset
Intel® C610 Series Chipset
Intel® E5-2600v3 Processor Family
NOTE: For more information regarding Intel chipsets, please see the following:
http://www.intel.com/products/server/chipsets/.
Upgradeability
Upgradeable to two (2) processors
On System
Management
Chipset
HPE iLO (Firmware HPE iLO4 2.0), 4GB NAND with 1GB USB user space configurable via UEFI and accessible
via iLO. Read and learn more in the iLO QuickSpecs.
NOTE: For more information, visit: http://www.hp.com/go/ilo
Memory
Protection
Advanced ECC
Memory Online Spare Mode (Rank Spare Mode)
Memory
One of the
following
Type
HPE SmartMemory
DDR4 Load Reduced (LRDIMM), or Registered (RDIMM)
Page 3
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
depending on
Model
Standard (Preconfigured Models)
Network
Controller
One of the
following
depending on
Model
One (1) 20Gb 2-port FlexFabric FLB, 10Gb 2-port HPE FlexFabric FLB, or 10Gb 2-port Ethernet FLB
NOTE: Supports FCoE, , TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and
autosensing 10Gb/1Gb Ethernet.
NOTE: Each port is autosensing the speed, and can interoperate with 1Gb HPE BladeSystem c-Class
interconnect components. Both ports will operate at the same speed.
NOTE: FlexFabric capabilities require the use of an HPE Virtual Connect FlexFabric or Flex10/10D module
module.
Fibre Channel over Ethernet (FCoE) is supported with HPE interconnects. Learn more at:
http://www.hp.com/go/bladesystem/interconnects
128GB (4 x 32GB) DDR4 2133MHz RDIMMs at 1.2V
64GB (4 x 16GB) DDR4 2133MHz RDIMMs at 1.2V
32GB (2 x 16GB) DDR4 2133MHz RDIMMs at 1.2V
32GB (2 x 16GB) DDR4 2133MHz RDIMMs at 1.2V
16GB (2 x 8GB) DDR4 2133MHz RDIMMs at 1.2V
16GB (2 x 8GB) DDR4 2133MHz RDIMMs at 1.2V
Maximum (LRDIMM) 1TB (16 x 64GB) up to 2133MHz at 1.2V
Maximum (RDIMM)
512GB (16 x 32GB) up to 2133MHz at 1.2V
NOTE: Support for 64GB LRDIMM and 32GB RDIMM available in earl 2015.
NOTE: HPE memory from previous generation servers (DDR3) is not compatible with this server. HPE
SmartMemory is required to realize the memory performance improvements and enhanced functionality
listed in this document for Gen9. For additional information, please see the HPE SmartMemory QuickSpecs
at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the Online Memory
Configuration Tool at: http://h22195.www2.hp.com/MemoryTool/Home/Legal
One (1) HPE FlexFabric 10Gb 2-port 536FLB FlexibleLOM
One (1) HPE FlexFabric 20Gb 2-port 650FLB FlexibleLOM
NOTE: FlexibleLOMs are not compatible with prior generation c-Class server blades
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HPE iLO 4 to Onboard Administrator link. The Onboard Administrator (with
10/100/1000 Mbps) to BladeSystem link is 1Gbps
Expansion Slots
Two (2) I/O expansion mezzanine slots:
• x16 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to interconnect
module bay 3 and the other to bay 4.
• x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).
NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port cards,
one port is routed to interconnect module bay 5 and the other to bay 6. For quad-port cards, one
port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to bay 8.
NOTE: A second processor must be installed (in processor slot 2) to have access to the second
expansion slot (expansion slot 2).
Mezzanine card options include:
• Dual-port 20Gb FlexFabric, Dual-port 10Gb FlexFabric, 10GbE options, and quad-port 1Gb Ethernet
server adapter mezzanine options for additional network ports.
• I/O accelerator mezzanine options for high transaction rate local storage
Page 4
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
HPE Server ROM
HPE ROM (read only memory) is now digitally signed using HPE's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts to
corrupt system ROM.
HPE ROM provides for essential initialization and validation of hardware components before control is passed
to the customer-installed operating system. The ROM also provides the capability of booting from various fixed
media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.
HPE ROM performs very early configuration of the video controller, to allow monitoring of initialization progress
via an attached monitor. If configuration or hardware errors are discovered during this early phase of hardware
initialization, suitable messages are now displayed on the connected monitor. Additionally, these configuration
or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.
HPE's ProLiant ROM is used to configure the following:
• Processor and chipset status registers
• System memory, memory map, and memory initialization
• System hardware configuration (integrated PCI devices and optional PCIe cards).
• Customer-specific BIOS configuration using the HPE ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HPE's RBSU (ROM based setup utility) user guide:
http://www.hp.com/support/rbsu
HPE Server UEFI
/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and
more secured configuration while interacting with your server at boot time. HPE ProLiant Gen9 platform
defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU) of
legacy BIOS. For more information, please visit http://www.hp.com/go/proliantuefi/docs
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
• Secure Boot
• Operating system specific functionality
• Support for > 2.2 TB (using GPT) boot drives
• USB 3.0 Stack
• Embedded UEFI Shell
• Mass Configuration Deployment Tool using HPE RESTful API
• PXE boot support for IPv6 networks
• Boot support for option cards that only support a UEFI option ROM
NOTE: For more information please visit http://www.hp.com/go/proliant/uefi
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to
support UEFI.
NOTE: HPE UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the
factory.
Storage Controller All BTO Modelsd
One (1) HPE Smart Array P244br Controller with 1GB Flash-Backed Write Cache
(FBWC) supporting RAID 0 and RAID 1, or HPE H244br Smart HBA.
NOTE: The HPE Smart Array P244br, the HPE H244br Smart HBA, and the HPE
B140i (chipset SATA). Support two (2) small form factor (SFF) hot plug drive bays.
NOTE: The FBWC and battery will be disabled when the server inlet temperature
exceeds 50C, the FBWC will be re-enabled when the temperature drops below 50C.
Page 5
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
The Smart Array P244 will continue to operate normally up to the short term
operating maximum of 55C.
Maximum Internal
Storage
One of the
following
depending on
Model
Hot Plug SFF SAS
2.4TB
2 x 1.2TB
Hot Plug SFF SATA
2.0TB
2 x 1.0TB
Hot Plug SFF SAS SSD 3.2TB
2 x 1.6TB
Hot Plug SFF SATA
1.6TB
2 x 800GB
SSD
NOTE: The ProLiant BL460c Gen9 server includes the HPE hot plug small form factor (SFF) SmartDrive
carrier for enhanced management and reduced maintenance errors. HPE drives from previous generation
servers (prior to Gen8) are not compatible with the ProLiant BL460c Gen9 drive bays.
Interfaces
Micro SDHC Slot
One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slot
USB 3.0 Port
One (1) internal USB 3.0 connector for USB flash media drive keys
NOTE: The above options are intended for integrated hypervisor virtualization environments.
Industry Standard ACPI 2.0
Microsoft® Logo certifications
Compliance
USB 3.0 Support
IPMI 2.0
Secure Digital 2.0
TPM 1.2 Support
IEEE (specific IEEE standards depending on Ethernet adapter card(s) installed)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
Active Directory v1.0
PCIe 3.0
ASHRAE A3
FIPS 140-2 Level-2 certification pending
Operating Systems Microsoft Windows Server
and Virtualization Red Hat Enterprise Linux (RHEL)
Software Support SUSE Linux Enterprise Server (SLES)
Canonical Ubuntu
for ProLiant
Oracle Solaris
Servers
VMware
NOTE: For more information on HPE's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page:
http://www.hp.com/servers/BL460cGen9
Enclosures
Hewlett Packard Enterprise offers two different c-Class server blade enclosures to meet your individual needs:
• The HPE BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant
BL460c Gen9 servers plugged vertically.
• The HPE BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HPE ProLiant
BL460c Gen9 servers plugged horizontally.
Page 6
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
Server blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator modules are
all designed to fit into the c3000 and c7000 enclosures.
NOTE: For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html
Graphics
Integrated Matrox G200eh video controller
• 1600 x 1200 (32 bpp)
• 1920 x 1200 (16 bpp)
HPE iLO Management On System Management Memory
• 16 MB Flash Video Memory
• 256 MB DDR 3 with ECC (112 MB after ECC and video)
Form Factor
HPE ProLiant BL460c Gen9 is a half-height server blade that plugs into the HPE BladeSystem c3000 and
c7000 enclosures.
Embedded
Management
HPE Integrated
Lights Out
Monitor your servers for ongoing management, service alerting, reporting and remote
management with iLO. Learn more at http://www.hp.com/go/ilo
UEFI
Configure and boot your servers securely with industry standard Unified Extensible
Firmware Interface (UEFI). Learn more at http://www.hp.com/go/ProLiant/uefi.
HPE RESTful API
RESTful API is an application programming interface. RESTful Web Service API served
by iLO’s web server. http://www.hp.com/go/restfulapi .
Intelligent
Provisioning
Provision servers by discovering and deploying 1 to few servers with Intelligent
Provisioning. Learn more at http://www.hp.com/go/intelligentprovisioning.
HPE Smart Update
Optimize firmware and driver updates with HPE Smart Update solutions. Learn more at
http://www.hp.com/go/smartupdate.
Server Utilities
HPE Systems Insight HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE
Manager (HPE SIM) Integrity Servers, and also provides you with basic support for non-Hewlett Packard
Enterprise servers. HPE SIM also integrates with HPE SUM to provide quick and
seemless firmware updates. Learn more at http://www.hp.com/go/sim.
Scripting Tool Kit and Provision 1 to many servers using your own scripts to discover and deploy them with
Windows PowerShell HPE Scripting Tool Kit for Windows and Linux or HPE Scripting Tools for Windows
PowerShell. Learn more at http://www.hp.com/go/ProLiantSTK or
http://www.hp.com/go/powershell.
HPE RESTful
Interface Tool
HPE iLO Mobile
Application
HPE RESTful API tool is a scripting tool to provision servers using RESTful API
Interface to discover and deploy servers at scale. Learn more at
http://www.hp.com/go/restfulapi.
Enables the ability to access, deploy, and manage your server anytime from anywhere
from select smartphones and mobile devices. For additional information please visit:
http://www.hp.com/go/ilo/mobileapp.
Page 7
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
HPE Insight Online
Security
•
•
•
•
•
•
•
•
•
•
•
Availability
HPE Insight Online, available at no additional cost as part of your HPE warranty, Care
Pack or contractual support agreement with HPE, is a personalized dashboard for
simplified tracking of IT operations and support information from anywhere, anytime.
Learn more at http://www.hp.com/go/insightonline/info.
Power-on password
Administrator's password
Keyboard password (QuickLock)
HPE iLO Management On System Management Chipset with:
− SSL encryption
− Secure Shell version 2
− Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on
browser, CLP and XML scripting interface
− AES and RC4 encryption of video
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 1.2 option
Advanced Encryption Standard (AES)
Intel® Advanced Encryption Standard-New Instructions (AES-NI)
FIPS 140-2 Level-2 certification pending
Memory
•
•
•
•
•
Advanced ECC uses single device data correction (SDDC) to detect and correct single and all multi-bit
error that occurs within a single DRAM chip. Both x4 and x8 SDDC are supported (x8 requires lockstep
mode).
Memory online spare mode (also known as rank spare mode) detects a rank that is degrading and
switches operation to the spare rank.
Memory demand and patrol scrubbing to prevent accumulation of correctable errors and reducing the
likelihood of unplanned downtime.
Failed DIMM isolation improves the service time thus improving the overall system availability.
Address parity protection available on RDIMMs and LRDIMMs detects address bit errors to improve
service time and overall system availability.
Mezzanine options and I/O
• Support for one (1) FlexibleLOM, providing two (2) (i.e. redundant) Ethernet ports
• Multiple mezzanine I/O expansion slots that support a wide variety of mezzanine cards each
supporting multiple data paths routed to redundant interconnect modules.
• Network Adapter Teaming (bonding) provides network fault tolerance, transmit load balancing, and
switch-assisted load balancing.
Storage
•
•
•
Two (2) Small Form Factor hot-plug SAS/SATA HDD or SSD drive bays.
Choice of the HPE Smart Array P244br Controller with 1GB FBWC/HPE, Smart HBA H244br, or theHP
B140i (chipset SATA). RAID 0 and 1 support for all three storage controller offerings.,
Optional dual-port Fibre Channel mezzanine card(s) for redundant SAN connections.
Processor/Chipset
• Processor internal sensors & thermal control protection against over-temperature conditions.
• Cache parity/ECC protects cache data from accidental data corruption.
• Machine Check Architecture (MCA) detects and captures hardware errors such as system bus,
memory ECC, parity, and cache, and improves service time.
• Intel® QPI Protocol Protection allows detection of data errors using a checksum of 8-bits.
Page 8
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Recommended Support Services for BL460
•
Core Disable for FRB (fault resilient boot) allows a system to power-on despite a failing core-pair. It
uses BIST (built-in self-test) results to detect a failure and disables the target core-pair upon
subsequent boot.
Server Blade Enclosure Infrastructure
• Pooled power for true N+N power redundancy through up to six (6) hot-plug, high-efficiency, common
slot enclosure-based power supplies (configuration dependent).
• Up to ten (10) enclosure-based hot-plug HPE Active Cool fans that scale to meet future demands,
optimize airflow, reduce power draw, and improve acoustic performance.
• Dual grid power providing redundant rack enclosure power feeds to the server blade enclosure.
• HPE Dynamic Power Saver Mode monitors the total enclosure power consumption in real time and
automatically adjusts with change in demand for improved efficiency and reliability.HPE Dynamic
Power Capping safely limits power usage without impacting performance by capping peak usage
instead of average power usage, removes risk to electrical infrastructure with a fast-acting, hardwarebased capping algorithm, and reclaims more power by dynamically controlling power limits based on
workload demand.
• Up to eight interconnect modules per server blade enclosure providing four simultaneous redundant
fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, Pass Thru Ethernet, etc.
• Enclosure crosslinks between adjacent enclosures to provide interconnect module-to-module
connections or as Virtual Connect module stacking links.
• Optional enclosure redundant Onboard Administrator system management module.
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network
of Hewlett Packard Enterprise Authorized Channel Partners. Hardware diagnostic support and repair is
available for three years from date of purchase. Support for software and initial setup is available for 90 days
from date of purchase. Enhancements to warranty services are available through HPE Care Pack services or
customized service agreements. Certain restrictions and exclusions apply. Hard drives have either a one year or
three year warranty; refer to specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1)
Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy
replacement but may involve added complexity. Customers may choose to have HPE replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical support is
available at http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
Page 9
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO server).
To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an Hewlett Packard
Enterprise approved configurator. Contact your local sales representative for information on CTO product offerings and
requirements.
NOTE: Configure-to-order server blades must start with a CTO Blade Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard
drives ordered with the server.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HPE ProLiant BL460c Gen9 E5-v3 10Gb/20Gb FlexibleLOM Configure-to-order Blade
Server
727021-B21
Configurable Models ship with:
One (1) FlexibleLOM connector providing a choice for one (1) of the supported 10Gb/20Gb
FlexibleLOMs (see Step 2)
Two (2) HPE small form factor hot-plug SAS/SATA/ HDD or SSD hard drive bays
Two (2) x16 PCIe I/O expansion slots (one Type A, one Type A/B)
One (1) integrated USB connector and one (1) MicroSDHC connector
One (1) TPM connector
HPE iLO Management (standard)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HPE Processors
NOTE: All configure-to-order processor kits (i.e. xxxxxx-L21) contain one (1) processor.
NOTE: If two processors are desired, select one xxxxxx-L21 here in Step 2 and one
xxxxxx-B21 in Step 4.
E5-2600 v3 series Processors
HP BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) FIO Processor
Kit
HP BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) FIO Processor
Kit
HP BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) FIO Processor
Kit
HP BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) FIO Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) FIO Processor
Kit
726988-L21
726989-L21
726990-L21
726991-L21
726992-L21
726993-L21
726994-L21
726995-L21
726997-L21
727003-L21
Page 10
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
E5-2600 v4 series Processors
HPE BL460c Gen9 Intel® Xeon® E5-2695v4 (2.1GHz/18-core/45MB/120W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2680v4 (2.4GHz/14-core/35MB/120W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2640v4 (2.4GHz/10-core/25MB/90W) FIO Processor
Kit
NOTE: All processors within the server must be identical.
NOTE: DIMM slots 4 and 5 are not accessible when the E5-2699 v4, E5-2697 v4, E52697A v4, E5-2667 v4, E5-2643 v4, E5-2637 v4, E5-2699 v3, the E5-2697 v3, the E52643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2 processor configuration, there
are twelve (12) total available DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above,
please reference the 'Memory Speed by Processor Model' table in the Memory section of
the QuickSpecs.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost
Technologies except the E5-2609 v4, E5-2603 v4, E5-2603 v3 and E5-2609 v3.
NOTE:DDR4 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported.
NOTE:For the Intel® C610 Chipset E5-2600 v3 and v4 Series, the letter preceding the
model number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a
Node, 6 is socket/segment designation, 00 = Processor SKU, and x = L for low power
SKUs.
NOTE:The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must
be installed in processor slot 1 for access to the first mezzanine expansion slot (expansion
slot 1). A processor must be installed in processor slot 2 for access to the second
mezzanine expansion slot (expansion slot 2).
NOTE:The letter "L" following the model number indicates denotes lower wattage.
HPE Memory
819853-L21
819842-L21
819839-L21
NOTE: HPE memory from previous generation servers (DDR3) is not compatible with this
server. HPE SmartMemory is required to realize the memory performance improvements
and enhanced functionality listed in this document for Gen9. For additional information,
please see the HPE SmartMemory QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed
within a server.
NOTE: Depending on the memory configuration and processor model, the memory speed
may run at 2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or
the Online Memory Configuration Tool at:
http://h22195.www2.hp.com/MemoryTool/Home/Legal
HPE SmartMemory
Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
726718-B21
726719-B21
Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
726722-B21
Registered DIMMs (RDIMMs) - E5-2600 v4 series Processors
Page 11
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit
HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit
NOTE: All DDR4 memory option kits consist of one DIMM per kit. For detailed memory
configuration rules and guidelines, please use the Online DDR4 Memory Configuration
Tool.
NOTE: Depending on the memory configuration and processor model, 2133MHz memory
may operate at a lower speed. Please see the see the "Memory" section later in this
document for details.
NOTE: For additional memory rules and guidelines, see the "Memory" section later in this
document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
http://www.hp.com/go/proliant-energy-efficient
HPE Networking
FlexibleLOM Adapters
NOTE: The server requires one (1) FlexibleLOM that is installed in the FlexibleLOM
connectors. All FlexibleLOMs are dual port: One port is routed to interconnect module bay
1 and the other to bay 2.
20Gb FlexibleLOM Adapters
HPE FlexFabric 20Gb 2-port 630FLB FIO Adapter
HPE FlexFabric 20Gb 2-port 650FLB FIO Adapter
10Gb FlexibleLOM Adapters
HPE FlexFabric 10Gb 2-port 536FLB FIO Adapter
HPE Ethernet 10Gb 2-port 560FLB FIO Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://www.hp.com/go/ProLiantNICs
805351-B21
836220-B21
805347-B21
700066-B21
700764-B21
766491-B21
684214-B21
Step 3: Choose Additional Factory Integration Options
HPE Insight
Software
HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server
FIO LTU
Converged
Infrastructure
Management
Software
HPE OneView with iLO Advanced - Server hardware required on same purchase order
HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU
HPE OneView for Blade Server including 3yr 24x7 Support FIO Bundle Physical 1-server
LTU
HPE Storage
Controllers
HP Smart Array P244br/1GB FBWC 12Gb 2-ports Int FIO SAS Controller
HPE H244brSmart HBA Controller
HPE FIO B140i RAID Enable Kit - BIOS Setting
NOTE: The HPE Smart Array B140i Controller (chipset SATA) comes standard with the
HPE BL460c Gen9 10Gb/20Gb FLB CTO Blade
(727021-B21). If neither the HPE
Smart Array P244br nor the HPE H244br controllers are chosen, a SATA cable will be
provided to support SATA devices for the two internal drives. If RAID is required when
using the B140i, please choose ‘HPE FIO B140i RAID Enable Kit - BIOS Setting’ (784308B21).
C6N36A
E5Y35AAE
F6Q89A
761871-B21
761878-B21
784308-B21
Step 4: Choose Additional Options for Factory Integration
Page 12
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Configuration Information - Factory Integrated Models
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional options,
including server blade enclosures interconnect, mezzanine options and power subsystem options; please see the Core Options
and Additional sections below; or the following:
• HPE BladeSystem c3000 Enclosure QuickSpecs:
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04123379
NOTE: The c3000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c7000 Enclosure QuickSpecs:
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04229580
NOTE: The c7000 HPE c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
• HPE BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html and
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For optimal cooling and system performance the BL460c Gen9 Server Blade requires the c7000 enclosure to be
configured with 10 fans and the c3000 enclosure to be configured with 6 fans.
Page 13
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
HPE Networking
NOTE: A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps when
connected to an interconnect module with 10Gb Ethernet downlinks.
NOTE: A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when connected to
an interconnect module with 1Gb Ethernet downlinks.
NOTE: The 10 Gigabit Ethernet adapters on each server blade connect to a 10Gb
interconnect in bays 3-6 (HPE BladeSystem c7000 Enclosure) or bays 2-4 (HPE
BladeSystem c3000 Enclosure).
20 Gigabit Ethernet Mezzanine Cards
HP FlexFabric 20Gb 2-port 630M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04312720
HPE FlexFabric 20Gb 2-port 650M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04347342
10 Gigabit Ethernet Mezzanine Cards
HPE FlexFabric 10Gb 2-port 534M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111368
HPE Ethernet 10Gb 2-port 560M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111406.
1 Gigabit Ethernet Mezzanine Cards
HPE Ethernet 1Gb 4-port 366M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111456
700076-B21
700767-B21
700748-B21
665246-B21
615729-B21
FlexibleLOM Adapters
NOTE: The server supports one (1) FlexibleLOM that is installed in the FlexibleLOM
connectors and is already included in the pre-configured models. However, it must be
added in Step 2 for Configure-to-Order Models. The FlexibleLOM options below are used
to change these original FlexibleLOMs.
20Gb FlexibleLOM Adapters
HPE FlexFabric 20Gb 2-port 630FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04312719
HPE FlexFabric 20Gb 2-port 650FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04347341
10Gb FlexibleLOM Adapters
HPE FlexFabric 10Gb 2-port 536FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
700065-B21
700763-B21
766490-B21
Page 14
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04347246
HPE Ethernet 10Gb 2-port 560FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111516
HPE Processors
E5-2600 v3 series Processors
HPE BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) Processor Kit
HPE BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) Processor Kit
655639-B21
726988-B21
726989-B21
726990-B21
726991-B21
726992-B21
726993-B21
726994-B21
726995-B21
726997-B21
727003-B21
E5-2600 v4 series Processors
HPE BL460c Gen9 Intel® Xeon® E5-2695v4 (2.1GHz/18-core/45MB/120W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2680v4 (2.4GHz/14-core/35MB/120W) FIO Processor
Kit
HPE BL460c Gen9 Intel® Xeon® E5-2640v4 (2.4GHz/10-core/25MB/90W) FIO Processor
Kit
NOTE: DIMM slots 4 and 5 are not accessible when either the E5-2699 v3, the E5-2697
v3, the E5-2643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2 processor
configuration, there are twelve (12) total available DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above,
please reference the 'Memory Speed by Processor Model' table in the Memory section of
the QuickSpecs.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading
Technology.
NOTE: Turbo indicates the maximum potential frequency when using Intel® Turbo Boost
Technology. The frequency boost increment is dependent on the processor SKU and the
number of active cores. In general, a higher boost increment is obtained when fewer cores
are active.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported.
NOTE: For the Intel® C610 Chipset E5-2600 v3 Series, the letter preceding the model
number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6
is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE: The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must
be installed in processor slot 1 for access to the first mezzanine expansion slot (expansion
slot 1). A processor must be installed in processor slot 2 for access to the second
mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost
Technologies except the E5-2603 v3 and E5-2609 v3.
NOTE: The letter "L" following the model number indicates denotes lower wattage.
819853-L21
819842-L21
819839-L21
Page 15
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
NOTE: The processor model as well as the memory configuration determines the
maximum speed memory can operate. Please see the see the "Memory" section later in
this document.
HPE Memory
NOTE: HPE memory from previous generation servers (DDR3) is not compatible with this
server. HPE SmartMemory is required to realize the memory performance improvements
and enhanced functionality listed in this document for Gen9. For additional information,
please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed
within a server.
NOTE: Depending on the memory configuration and processor model, the memory speed
may run at 2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or
the Online Memory Configuration Tool at:
http://h22195.www2.hp.com/MemoryTool/Home/Legal
HPE SmartMemory
Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit
NOTE: Depending on the memory configuration and processor model, 2133MHz memory
may operate at a lower speed. Please see the see the "Memory" section later in this
document and the Online Memory Configuration Tool for details at
http://h22195.www2.hp.com/MemoryTool/Home/Legal .
HPE Hard Drives
726718-B21
726719-B21
726722-B21
NOTE: The ProLiant BL460c Gen9 server includes the HPE hot-plug small form factor
(SFF) SmartDrive carrier for enhanced management and reduced maintenance errors.
HPE drives from generation G7 servers and before are not compatible with the BL460c
Gen9 drive bays.
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server,
but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives
types is not supported.
NOTE: HPE hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE: The hard drive options are not required when configuring a drive-less model.
SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive
HPE 1.8TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e HDD
HPE 1.2TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty HDD
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
718162-B21
791034-B21
781518-B21
652589-B21
652583-B21
652572-B21
652564-B21
652611-B21
652605-B21
Page 16
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Core Options
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server,
but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives
types is not supported
NOTE: The solid state M.2 SATA drives plug directly into a connector on the system
board and do not use a SFF drive cage slot.
NOTE: RAID 1, 0 are provided through the B140i in UEFI BIOS mode only.
HPE 64GB Value Endurance Solid State M.2 Enablement Kit for ProLiant Blades
HPE 64GB SATA Read Intensive 2242 3yr Wty Dual M.2 Kit
775588-B21
12G SAS VE SFF (2.5-inch) SC EV Enterprise Drives
HP 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State
Drive
16G SATA Hot Plug RI uFF (2.5-inch) Solid State Drives
HPE 340GB SATA 6G Read Intensive UFF 3yr Wty Dual M.2 Kit
762263-B21
815605-B21
Page 17
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Additional Options
HPE Insight
software
HPE Insight Control
HPE Insight Control including 1yr 24x7 Technical Support and Updates 1-server LTU
HPE Insight Control including 1yr 24x7 TSU E-LTU
HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO E-LTU
HPE Insight Management Media Kit
NOTE: HPE Insight Management Media Kit contains DVDs without licenses. Contains HPE
Systems Insight Manager, HPE Insight Control, HPE Matrix Operating Environment, and
Virtual Connect Enterprise Manager software. Uses an integrated installer to perform
quick and accurate software installation and updates.
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses
with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one year of 24 x
7 HPE Software Technical Support Service.
NOTE: Licenses ship without media. The HPE Insight Management Media Kit can be
ordered separately, or can be downloaded at http://www.hp.com/go/insightupdates
NOTE: For additional license kits, please see the QuickSpecs at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123391
HPE iLO Advanced HPE Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
License
Management
HPE iLO Advanced for BladeSystem including 3yr 24x7 Technical Support and Updates ELTU
HPE iLO Advanced for BladeSystem including 3yr 24x7 Tech Support and Updates 1-server
LTU
HPE iLO Advanced for BladeSystem including 1yr 24x7 Technical Support and Updates ELTU
HPE iLO Advanced for BladeSystem including 1yr 24x7 Support 1-server LTU
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one or three
years of 24 x 7 HPE Software Technical Support Service.
NOTE: For additional license kits, including electronic delivery options, please see the iLO
QuickSpecs at http://www.hp.com/go/iLO
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one or three year
of 24 x 7 HPE Software Technical Support Service.
NOTE: For additional license kits, please see the QuickSpecs at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154343
Converged
Infrastructure
Management
Software
HPE OneView
HPE OneView with iLO Advanced
HPE OneView including 3yr 24x7 Support Physical 1-server LTU
HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU
HPE OneView Physical Media Kit LTU
C6N27A
C6N28ABE
C6N36ABE
C6N31A
E6U63ABE
BD502A
E6U60ABE
512488-B21
E5Y34A
E5Y35AAE
E5Y37A
Page 18
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Additional Options
High Performance HPE Cluster Management Utility
Clusters
HPE Insight Cluster Management Utility 1yr 24x7 Flexible LTU
HPE Insight Cluster Management Utility 3yr 24x7 Flexible LTU
NOTE: These part numbers can be used to purchase one certificate for multiple licenses
and support with a single activation key. Each license is for one node (server). Customer
will receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in order to
obtain a license key. Customer also will receive a support agreement.
HPE Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs at
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111735.
QL803B
BD476A
BD477A
HPE Security
HP Trusted Platform Module Option
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely
store artifacts used to authenticate the server platform. These artifacts can include
passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption
(BitLocker) is a data protection feature available in Windows Server® 2008 R2. BitLocker
leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version
1.2. The TPM works with BitLocker to help protect user data and to ensure that a server
running Windows Server 2008 R2 has not been tampered with while the system was
offline.
NOTE: For more information about TPM, including a white paper, go to
http://www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
488069-B21
HPE Storage
Controllers
HPE Smart Array P244br/1GB FBWC 12Gb 2-ports Int SAS Controller
HPE H244br 12Gb 2-ports Int Smart Host Bus Adapter
NOTE: The FBWC and battery will be disabled when the server inlet temperature exceeds
50C, the FBWC will be re-enabled when the temperature drops below 50C. The Smart
Array P244 will continue to operate normally up to the short term operating maximum of
55C.
HPE QMH2672 16Gb Fibre Channel Host Bus Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04126962
749680-B21
726809-B21
710608-B21
HPE Flash Media HPE Flash Media Kits for USB Drives
Kits for USB Drives HPE Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HPE 8GB microSD Enterprise Mainstream Flash Media Kit
HPE 32GB microSD Mainstream Flash Media Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123175
HPE Care Pack
737953-B21
726116-B21
700139-B21
Proactive Care Services
Page 19
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Additional Options
Services
HPE 3 year Proactive Care 24x7 BL4xxc Gen9 Service
HPE 3 year Proactive Care 24x7 with DMR BL4xxc Gen9 Service
HPE 3 year Proactive Care Advanced 24x7 BL4xxc Gen9 Service
HPE 3 year Proactive Care Advanced 24x7 with DMR BL4xxc Gen9 Service
U7BN8E
U7BN9E
U7BT6E
U7CF8E
Installation Services
HPE Install c-Class Server Blade Service
NOTE: Additional HPE Care Pack services can be found at: http://www.hp.com/go/cpc
UE493E
Page 20
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Memory
For detailed memory configuration rules and guidelines, please use the Online DDR4 Memory Configuration Tool:
http://h22195.www2.hp.com/MemoryTool/Home/Legal
Memory Subsystem Architecture
Each Intel® Xeon® E5-2600 v3 family or Intel® Xeon® E5-2600 v3 family processor socket contains four memory channels that
support two DIMMs each for a total of eight (8) DIMM per installed processor or a grand total of sixteen (16) DIMMs for the server.
Up to 64GB capacity DIMMs are supported for 1TB of memory (16 DIMM slots x 64GB per DIMM).
NOTE: 64GB DIMM support available in earl 2015.
Memory Population Rules and Guidelines:
• A minimum of one DIMM is required per processor.
• Install DIMMs only if the corresponding processor is installed.
• If only one processor is installed in a two processor system, only half of the DIMM slots are available.
• DIMM sizes can be mixed in channel. To maximize performance, it is recommended to balance the total memory capacity
between all installed processors and to load the channels similarly whenever possible.
• LRDIMM and RDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant
Gen9 servers support RDIMM and LRDIMM.
• DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
• The maximum memory speed is a function of the memory type, memory configuration, and processor model.
• The maximum memory capacity is a function of the memory type and number of installed processors.
• HPE memory from previous generation servers is not compatible with the BL460c Gen9 Server Blade.
• To realize the performance memory capabilities listed in this document, HPE SmartMemory is required. For additional
information, please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535
• For memory population rules and additional memory guidelines, please see the BL460c Gen9 user guide at
http://www.hp.com/support.
Supported Memory Bandwidth on Intel® Xeon® E5-2600 v3 series Processors
DIMM Rank
DIMM Capacity
Register DIMM (RDIMM)
Single Rank (1R)
Dual Rank (2R)
8GB
16GB
8GB
Voltage
Std Voltage 1.2V
12 slot servers
16 slot servers
12
16
12 slot servers
Std Voltage 1.2V
Load Reduced (LRDIMM)
Dual Rank (2R)
Quad Rank (4R)
16GB
32GB
Std Voltage 1.2V
Std Voltage
1.2V
Std Voltage 1.2V
SLOTS THAT CAN BE POPULATED
12
12
16
16
12
16
12
16
96
MAXIMUM CAPACITY (GB)*
192
96
192
384
16 slot servers
128
256
256
512
1 DIMM Per Channel
2133
2133
2133
2133
2133
128
POPULATED DIMM SPEED (MT/s)
2133
2133
2 DIMM Per Channel
2133
2133
2133
*Maximum Capacity will vary based on individual serve platform qualification schedule
Memory Speed by E5-2600 v3 Series Processor Model
Page 21
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Memory
Processor Models
E5-2690 v3, E5-2695 v3, E5-2697 v3, E5-2698 v3, E5-2699 v3, E5-2687W v3, E5-2683 v3, E52680 v3, E5-2670 v3, E5-2667 v3 , E5-2660 v3, E5-2650 v3, E5-2650L, E5-2643 v3, E5-2637 v3
E5-2640 v3, E5-2630 v3, E5-2630L v3, E5-2623 v3, E5-2620 v3
E5-2609 v3, E5-2603 v3
Supported Memory
Speeds
2133MHz
1866MHz
1600MHz
Standard and Maximum Memory Capacity (Pre-configured Models) for E5-2600 v3 Series
Pre Configured Models
Standard Memory
Intel Xeon E5-2670 v3
128GB
(4x 32GB)
64GB
(4x 16GB)
32GB
(2x 16GB)
16GB
(2x 8GB)
Intel Xeon E5-2660 v3
Intel Xeon E5-2650 v3, E52640 v3
Intel Xeon E5-2620 v3, E52609 v3
Maximum Memory Plus
Optional Memory
896GB
(4x 32GB + 12x 64GB)
256GB
(4x 16GB + 12x 16GB)
256GB
(2x 16GB + 14x 16GB)
240GB
(2x 8GB + 14x 16GB)
Standard Memory Replaced
with Optional Memory
1TB
(16x 64GB)
1TB
(16x 64GB)
1TB
(16x 64GB)
1TB
(16x 64GB)
NOTE: Support for 64GB LRDIMMs and 32GB RDIMMs to be available by early 2015.
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
• 2GB = 2,048MB
• 4GB = 4,096MB
• 8GB = 8,192MB
• 16GB = 16,384MB
• 32GB = 32,768MB
Page 22
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Memory
Memory options part number decoder
Item
Description
Definition
1
Capacity
8 GByte
16 GByte
32 GByte
2
Rank
1R = Single-rank
2R = Dual-rank
4R = Quad-rank
3
Data width
x4 = 4-bit
x8 = 8-bit
4
Memory generation DDR4
5
Max. Memory speed 2133MT/s
6
CasLatency
P = 15
6
DIMM type
R = RDIMM (registered)
L = LRDIMM (load reduced)
Following are memory options available from HPE:
HPE Memory
NOTE: HPE memory from previous generation servers (DDR3) is not compatible with
this server. HPE SmartMemory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen9. For
additional information, please see the HPE SmartMemory QuickSpecs at:
http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed
within a server.
NOTE: Depending on the memory configuration and processor model, the memory
speed may run at 2133MHz, 1866MHz, or 1600MHz.
HPE SmartMemory
Registered DIMMs (RDIMMs)
Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors
Page 23
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Memory
HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit
Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors
HP 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory
Kit
NOTE: Depending on the memory configuration and processor model, 2133MHz
memory may operate at a lower speed. Please see the see the "Memory" section later in
this document.
726718-B21
726719-B21
726722-B21
Page 24
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Storage
1-2
2 x SFF hot-plug SAS, SATA, SAS SDD, and SATA SSD hard drives
Page 25
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Technical Specifications
System Unit
Dimensions
(H x W x D)
(with bezel)
7.11 x 2.18 x 20.37 in (18.07 x 5.54 x 51.76 cm)
Weight
(approximate)
Maximum: all processors, 16
DIMMs, hard drives,
mezzanine cards, and two
flash cache batteries installed)
Minimum: one processor and
2 DIMMs installed
14.00 lb (6.33 kg)
10.50 lb (4.75 kg)
Power Specifications For power specifications including input requirements, BTU rating, and power supply
output, please see the:
•
•
HPE BladeSystem c3000 Enclosure QuickSpecs at
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04123
379
HPE BladeSystem c7000 Enclosure QuickSpecs at
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04229580
To review typical system power ratings use the HPE Power Advisor which is available
via the online tool located at http://www.hp.com/go/hppoweradvisor.
NOTE: For optimal cooling and system performance the BL460c Gen9 Server Blade
requires the c7000 enclosure to be configured with 10 fans and the c3000 enclosure
to be configured with 6 fans.
System Inlet
Temperature
Operating
Non-operating
10° to 35°C (50° to 95°F) at sea level with an altitude
derating of 1.0°C per every 305 m (1.8°F per every
1,000 ft) above sea level to a maximum of 3,050 m
(10,000 ft), no direct sustained sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The
upper limit may be limited by the type and number of
options installed.
System performance may be reduced if operating with a
fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of change
is 20°C/hr (36°F/hr).
Extended Ambient
Operating Support
For Approved hardware configurations, the supported system inlet range is extended
to be:
5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude
derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a
maximum of 3050 m (10,000 ft)
NOTE: Qualifications for extended ambient configurations are detailed at:
https://www.hp.com/servers/ASHRAE
Relative Humidity
(non-condensing)
Operating
Non-operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-condensing.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-condensing.
Page 26
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Technical Specifications
Altitude
Operating
Non-operating
Acoustic Noise
3,050 m (10,000 ft). This value may be limited by the
type and number of options installed. Maximum
allowable altitude change rate is 457 m/min (1,500
ft/min).
9,144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1,500 ft/min).
For acoustic noise specifications, please see the HPE BladeSystem c-Class Enclosures
QuickSpecs located at:
• HPE BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/QuickSpecs/12790_div/
12790_div.html
• HPE BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/QuickSpecs/12810_div/
12810_div.html
HPE Smart Array Disk Drive Interface
P244br Controller
Server Interface
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
RAID Support
Other
12Gb/s SAS (Serial Attached SCSI)
6Gb/s SATA (Serial ATA)
x8 5G PCIe 3.0 provides 8GB/s maximum bandwidth
1GB flash backed write cache (FBWC) cache standard
64 (with included 1GB cache)
HPE Smart HBA Disk Drive Interface
H244br Controller
Server Interface
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
RAID Support
Other
12Gb/s SAS (Serial Attached SCSI)
6Gb/s SATA (Serial ATA)
x8 5G PCIe 3.0 provides 8GB/s maximum bandwidth
None
64
HPE Dynamic
Disk Drive Interface
Smart Array B140i Server Interface
Controller
SAS Connectors
Cache Memory
SAS Speed
Logical Drives
Supported
6Gb/s SATA (Serial ATA)
Embedded x4 PCIe 2.0
2 internal SATA ports
None
6Gb/s SATA links
Up to 10 logical volumes (2 physical drives)
64-bit, supporting servers memory space greater than 4GB
RAID 1 (mirroring), RAID 0 (striping), RAID 10
Upgradeable firmware with recovery ROM
Online drive flash (with SAS drives)
64-bit, supporting servers memory space greater than 4GB
RAID 1 (mirroring) and RAID 0 (striping)
Upgradeable firmware with recovery ROM
Online drive flash (with SAS drives)
Page 27
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Technical Specifications
Host Memory
Addressing
Hot Plug Support
RAID Support
Other
HPE FlexFabric
10Gb
2-port 536FLB
FlexibleLOM
Yes
RAID 1 (Mirroring)
RAID 0 (Striping)
Upgradeable firmware with recovery ROM
Type
Integrated dual-port KR 10Gb FlexibleLOM with FlexFabric (Flex-10, FCoE, hardwarebased iSCSI, iSCSI boot, TCP/IP offload engine, and autosensing 1Gb/10Gb Ethernet
capability)
Network Processor
QLogic 57840S with integrated MAC/PHY
Data Transfer
Method
Network Transfer
Rate
x8 PCI Express 3.0
IEEE Compliance
HPE FlexFabric
20Gb
2-port 650FLB
FlexibleLOM
64-bit, supporting greater than 4GB server memory space
Two ports, each at 20Gbps full duplex; 40Gbps aggregate full duplex theoretical
bandwidth
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb or 10Gb
HPE BladeSystem c-Class interconnect components. Both ports will operate at the
same speed.
NOTE: Each port on the 554FLB adapter transmits from the server at 20Gbps
(theoretical) full duplex.
802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4) and 802.3x
Standard Features
Full hardware offload of iSCSI and FCoE storage protocol processing for highest
performance
converged Ethernet data and storage networks.
Dual-port 10GbE Flex-10 FlexibleLOM network adapter that provides the flexibility to
choose the
type of LOM to meet growing infrastructure needs
Industry-leading throughput and latency performance
Supports HPE's Flex-10 blade interconnect technology
User configurable bandwidth settings when combined with the 10Gb Flex-10 Virtual
Connect
module. From 100Mb/s to10Gb/s on up to four "Physical Function" NICs per port, in
increments of
100Mb/s for NIC. The combined bandwidth of NICs cannot exceed port bandwidth i.e.
10 Gb.
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE)
Improved small packet performance
Support for Preboot eXecution Environment (PXE)
Integrated PHY and MAC
Supports for SR-IOV
Support for Network Partitioning (NPAR)
Type
Integrated dual-port KR2 20Gb FlexibleLOM with FlexFabric (Flex-20, FCoE, RoCE,
Tunnel Offload with VXLAN/NVGRE, hardware-based iSCSI, iSCSI boot, TCP/IP offload
engine, and autosensing Ethernet speed capability)
Network Processor
Emulex XE-104
Page 28
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Technical Specifications
Data Transfer
Method
Network Transfer
Rate
x8 PCI Express 3.0
IEEE Compliance
802.3ae, 802.1Q, 802.3x, 802.1p, 802.3ad/LACP, 802.1AB(LLDP), 802.1Qbg,
802.1Qbb, 802.1Qaz, 802.3ap
Standard Features
Dual 20Gb ports provide up to 80Gb bi-directional per adapter
Multi-speed adapter operates at either 20GbE or 10GbE
Converges FCoE or RoCE with LAN traffic on a single Ethernet wire
Tunnel Offload support for VXLAN and NVGRE
RDMA over Converged Ethernet (RoCE) for greater server efficiency and lower latency
(6125XLG only)
Advanced storage offload processing freeing up valuable CPU cycles
Supports UEFI and legacy boot options
Mixed Storage – supports NIC + FCoE on one port, and NIC + iSCSI on the other
Concurrent Storage – concurrently supports NIC, FCoE, and iSCSI storage functions on
the same port (NIC + FCoE + iSCSI)
Industry-leading throughput and latency performance
Supports HPE's Flex-20 blade interconnect technology
Over eight million small packets/s, ideal for web/mobile applications, mobile messaging,
and social media
User configurable bandwidth settings when combined with the 20Gb Flex-20 Virtual
Connect module. From 100Mb/s to10Gb/s on up to four "Physical Function" NICs per
port, in increments of 100Mb/s for NIC. The combined bandwidth of NICs cannot
exceed port bandwidth i.e. 20 Gb/s.
Greater bandwidth with PCIe 3.0
Jumbo Frames support
Supports Wake On LAN (WOL)
Support for Preboot eXecution Environment (PXE)
Support for Microsoft Windows SMB Direct
Optimized host virtualization density with SR-IOV support
EnvironmentEnd-of-life
friendly Products Management and
and Approach
Recycling
Two ports, each at 40 Gbps bi-directional; 80 Gbps aggregate bi-directional theoretical
bandwidth
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product
return, trade-in, and recycling programs in many geographic areas. For trade-in
information, please go to: http://www.hpe.com/info/recycle. To recycle your product,
please go to: http://www.hpe.com/info/recycle or contact your nearest Hewlett
Packard Enterprise sales office. Products returned to Hewlett Packard Enterprise will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard Enterprise web
site at: http://www.hpe.com/info/recycle. These instructions may be used by
recyclers and other WEEE treatment facilities as well as HEWLETT PACKARD
ENTERPRISE OEM customers who integrate and re-sell Hewlett Packard Enterprise
equipment.
Page 29
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Technical Specifications
Page 30
QuickSpecs
HPE ProLiant BL460c Gen9 Server Blade
Summary of Changes
Date
10-Feb-2017
Version History
From Version 3 to 4
Action
Changed
Added
Removed
11-Mar-2016
From Version 2 to 3
Changed
Added
Removed
19-Jun-2015
From Version 1 to 2
Changed
Description of Change
Configuration Information - Factory Integrated Models, and Core
Options sections were updated.
SKUs were added to QuickSpecs:
819853-L21, 819842-L21, 819839-L21, 805351-B21,
836220-B21, 805347-B21, 819853-L21, 819842-L21,
819839-L21, 775588-B21, 762263-B21, 815605-B21.
Obsolete SKUs were deleted:
691868-B21, 691866-B21, BD883A.
Configuration Information - Factory Integrated Models and Core
Options sections were updated.
SKUs added in Configuration Information - Factory Integrated
Models and Core Options sections:
781518-B21, 791034-B21, 775588-B21, 700767-B21,
700764-B21, 710608-B21.
Obsolete SKUs were deleted:
F6Q89AAE, E5Y38A, E5Y39AAE, QK763A, QK762A, QK761A,
D8S85AAE, D8S84A.
Information updated and corrections to QS.
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
Windows is a US registered trademark of Microsoft Corporation.
c04704792 - 15311 - Worldwide - V4 - 10-February-2017
Page 31