Cisco MDS 9700 48-Port 16-Gbps Fibre Channel

Data Sheet
Cisco MDS 9700 48-Port 16-Gbps Fibre Channel
Switching Module
Product Overview
®
The Cisco MDS 9700 48-Port 16-Gbps Fibre Channel Switching Module deliver high performance and innovative
features to enable convergence, scalability, and intelligence in large, virtualized data centers. With up to 384
line-rate 16-Gbps Fibre Channel ports per chassis, intelligent fabric services such as integrated VSANs, InterVSAN Routing (IVR), and PortChannels, the Cisco MDS 9700 48-Port 16-Gbps Fibre Channel Switching Module
(Figure 1) enables deployment of large, scalable, and virtualized data centers.
For the most demanding storage networking environments, the Cisco MDS 9700 48-Port 16-Gbps Fibre Channel
Switching Module delivers uncompromising performance. The 48-port 16-Gbps switching module delivers fullduplex aggregate performance of 768 Gbps, making this module well suited for attachment of high-performance
16-Gbps storage subsystems, 16-Gbps Inter-Switch Links (ISLs), and high-performance and virtualized servers.
Figure 1.
Cisco MDS 9700 48-Port 16-Gbps Fibre Channel Switching Module
The Cisco MDS 9700 48-Port 16-Gbps Fibre Channel Switching Module enables you to consolidate SAN
deployments with fewer hardware components, consolidate workloads from hundreds of virtual machines with
performance, and scale with incremental updates as your SAN grows while protecting your existing investment.
The Cisco MDS 9700 48-Port 16-Gbps Fibre Channel Switching Module also provides Cisco VMpath technology,
which enables advanced virtual machine-aware SAN provisioning and monitoring for virtualized data centers. With
Cisco VMpath, you can monitor, manage, and control SAN resource allocation and performance on a per-virtual
machine basis and map paths all the way from the server to storage, enabling end-to-end tracking of missioncritical workloads.
Cisco MDS 9700 Series Fibre Channel Switching Module is hot-swappable and compatible with 2/4/8-Gbps,
4/8/16-Gbps and 10-Gbps FC interfaces, and supports hot-swappable Enhanced Small Form-Factor Pluggable
(SFP+) transceivers. MDS 9700 module also supports 10 Gigabit Ethernet clocked optics carrying 10Gbps Fibre
Channel traffic. Individual ports can be configured with Cisco 16-Gbps, 8-Gbps, or 10-Gbps SFP+ transceivers.
Each port supports 500 buffer credits for exceptional extensibility without requiring additional licensing. With the
Cisco Enterprise Package, up to 4095 buffer credits can be allocated to an individual port, enabling full link
bandwidth over long distances with no degradation in link utilization.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 10
The 16-Gbps Fibre Channel switching module continues to provide previously available features
such as predictable performance and high availability, advanced traffic management capabilities, integrated
VSANs and IVR, resilient high-performance ISLs, comprehensive security frameworks, fault detection and
isolation of errored packets, and sophisticated diagnostics.
Product Highlights
●
Outstanding SAN Performance: The combination of the 16-Gbps Fibre Channel switching module and the
Fabric-1 crossbar switching modules enables up to 1.5 Tbps of Fibre Channel throughput between
modules in each direction for each of the eight Cisco MDS 9710 payload slots. This per-slot bandwidth is
twice the bandwidth needed to support a 48-port 16-Gbps Fibre Channel module at full line rate. Cisco
MDS 9700 architecture, based on central arbitration and crossbar fabric, provides 16-Gbps line-rate,
nonblocking, predictable performance across all traffic conditions for every port in the chassis.
●
High Availability: The Cisco MDS 9700 provides outstanding availability and reliability. The Cisco MDS
9710 is the industry’s first director-class switch to enables redundancy on all major components, including
the Fabric Card. It provides Grid Redundancy on Power Supply and 1+1 redundant Supervisors. Users can
add additional fabric card to enable N+1 Fabric Redundancy.
●
Industry-leading scalability: With up to 24 terabits per second (Tbps) of Fibre Channel system bandwidth
and 384 2/4/8/16-Gbps full line-rate autosensing Fibre Channel ports in a single chassis or up to 1152
Fibre Channel ports in a single rack, the Cisco MDS 9710 leads the industry in scalability and is designed
to meet the requirements of the largest data center storage environments.
●
Intelligent network services: VSAN technology, access control lists (ACLs) for hardware-based intelligent
frame processing, and fabricwide quality of service (QoS) enable migration from SAN islands to
enterprisewide storage networks.
◦
Integrated hardware-based VSANs and IVR: Integration of VSANs into port-level hardware allows any
port in a system or fabric to be partitioned to any VSAN. Integrated hardware-based IVR provides linerate routing between any ports in a system or fabric without the need for external routing appliances.
◦
Intelligent storage services: The Cisco MDS 9700 operates with intelligent service capabilities on other
Cisco MDS 9000 Family platforms to provide services such as acceleration of storage applications for
data replication and backup and data migration to hosts and targets attached to the Cisco MDS 9700.
◦
Smart Zoning: When the Smart Zoning feature is enabled, Cisco MDS 9700 Series fabrics provision the
hardware access control entries specified by the zone set more efficiently, avoiding the superfluous
entries that would allow servers (initiators) to talk to other servers, or allow storage devices (targets) to
talk to other storage devices. This feature makes larger zones with multiple initiators and multiple targets
feasible without excessive consumption of hardware resources. Thus, smart zones can correspond to
applications, application clusters, hypervisor clusters, or other data center entities, saving the time that
administrators previously spent creating many small zones and enabling the automation of zoning tasks.
●
Virtual machine transparency: The Cisco MDS 9700 Series provides deterministic hardware performance
and a comprehensive feature set that allows virtual machines to have the same SAN attributes as a
physical server. On a per-virtual machine basis, the Cisco NX-OS Software offers VSANs, QoS policies,
access control, performance monitoring, and data protection to promote the scalability and mobility of
virtual machines. Cisco Prime Data Center Network Manager provides end-to-end visibility from the virtual
machine to the storage, with resource allocation, performance measurements, and predictions available on
a per-virtual machine basis to enable rapid troubleshooting in mission-critical virtualized environments.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 10
●
Comprehensive security: In addition to support for services such as VSANs, hardware-enforced zoning,
®
ACLs, per-VSAN role-based access control (RBAC), and Cisco TrustSec Fibre Channel link encryption,
the Cisco MDS 9700 Series supports a comprehensive security framework consisting of RADIUS and
1
TACACS+, Fibre Channel Security Protocol (FC-SP) , Secure File Transfer Protocol (SFTP), Secure Shell
(SSH) Protocol, and Simple Network Management Protocol Version 3 (SNMPv3). Cisco TrustSec
®1
Fibre
Channel link encryption delivers transparent, hardware-based 16-Gbps line-rate encryption of Fibre
Channel data on 16-Gbps Fibre Channel switching modules in addition to 10-Gbps line-rate encryption.
●
Resilient High-Performance ISLs: The Cisco MDS 9700 Series 16-Gbps Fibre Channel switching modules
support high-performance ISLs consisting of 16-Gbps or 10-Gbps secure Fibre Channel. Fibre Channel
switching modules also offer PortChannel technology, with up to 16 links spanning any port on any module
within a chassis grouped into a logical link for added scalability and resilience. Up to 4095 buffer-to-buffer
credits can be assigned to a single Fibre Channel port, providing industry-leading extension of storage
networks up to 4000 km at 2 Gbps, 2000 km at 4 Gbps, 1000 km at 8 Gbps, 500 km at 16 Gbps, or 680 km
at 10 Gbps while maintaining full link bandwidth. The Cisco MDS 9700 Series switch architecture helps
ensure that frames can never be reordered within a switch.
●
Sophisticated Diagnostics: The Cisco MDS 9700 48-Port 16-Gbps Fibre Channel Switching Module
provides intelligent diagnostics, protocol decoding, and network analysis tools as well as integrated Cisco
Call Home capability for added reliability, faster problem resolution, and reduced service costs.
●
1
Advanced FICON Services : The Cisco MDS 9710 is mainframe ready, with full support for FICON and
Linux environments.
Key Benefits
Lower Total Cost of Ownership with SAN Consolidation
With the exponential growth of data in today’s business environment, organizations need to deploy large-scale
SANs in the most efficient and cost-effective ways. To meet scalability requirements while managing total cost of
ownership (TCO), the Cisco MDS 9710 offers industry-leading port densities of up to 384 16-Gbps Fibre Channel
ports per chassis, 1.5-Tbps Fibre Channel performance per slot, up to 24-Tbps front-panel Fibre Channel line-rate
nonblocking system-level switching, unparalleled capabilities with intelligent fabric services, VSANs for
consolidating individual physical SAN islands while maintaining logical boundaries, and IVR for sharing resources
across VSANs. These features enable the consolidation of an organization’s data assets into fewer, larger, and
more manageable SANs, thus reducing the hardware footprint and associated capital and operational expenses.
Enterprise-Class Availability
The Cisco MDS 9700 was designed from the beginning for high availability. Beyond meeting the basic
requirements of nondisruptive software upgrades and redundancy of all critical hardware components, the Cisco
MDS 9700 software architecture offers outstanding availability.
Virtual Machine-Aware SAN Deployment
Growing adoption of server virtualization in the data center increases the number of hosts attached to the SAN,
places higher workloads on the SAN, requires more storage, and increases the need for SAN services. Cisco
VMpath technology, part of Cisco Prime Data Center Network Manager, provides end-to-end visibility from the
virtual machine to the storage, with resource allocation, performance measurements, and predictions available on
a per-virtual machine basis to enable rapid troubleshooting in mission-critical virtualized environments.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 10
Advanced Traffic Management
Advanced traffic management capabilities integrated into every Cisco MDS 9700 Series 16-Gbps Fibre Channel
Switching Module simplify deployment and optimization of large-scale fabrics.
●
Virtual Output Queue (VOQ): Helps ensure line-rate performance on each port, independent of traffic
pattern, by eliminating head-of-line blocking.
●
Up to 4095 Buffer-to-Buffer Credits: Can be assigned to any individual port for optimal bandwidth utilization
across distance.
●
PortChannels: Allow you to aggregate up to 16 physical ISLs into a single logical bundle, providing
optimized bandwidth utilization across all links; the bundle can be a mix of any port from any module in the
chassis, helping ensure that the bundle can remain active even in the event of a module failure.
●
Fabric Shortest Path First (FSPF)-based Multipathing: Provides the intelligence to load-balance across up
to 16 equal-cost paths and dynamically reroute traffic in the event of a switch failure.
●
QoS: Helps manage bandwidth and control latency to prioritize critical traffic; available on every port.
●
Lossless Networkwide In-Order Delivery Guarantee: The Cisco MDS 9700 Series switch architecture
guarantees that frames can never be reordered within a switch. This guarantee extends across an entire
multiswitch fabric, assuming that the fabric is stable and that no topology changes are made.
Advanced Diagnostics and Troubleshooting Tools
The Cisco MDS 9700 Series integrates proactive diagnostics, tools to verify connectivity and route latency, and
mechanisms for capturing and analyzing traffic, helping simplify the management of large-scale storage networks.
The power-on self-test (POST) and online diagnostics provide proactive health monitoring. Starting with Cisco
MDS 9000 NX-OS 6.2, the powerful Cisco Generic Online Diagnostics (GOLD) framework replaces the Cisco
Online Health Management System (OHMS) diagnostic framework on the new Cisco MDS 9700 Series Multilayer
Director chassis. Cisco GOLD is a suite of diagnostic facilities to verify that hardware and internal data paths are
operating as designed. Boot-time diagnostics, continuous monitoring, standby fabric loopback tests, and ondemand and scheduled tests are part of the Cisco GOLD feature set. This industry-leading diagnostics subsystem
enables the rapid fault isolation and continuous system monitoring critical in today's continuously operating
environments. Integrated hardware functions enable diagnostic capabilities such as Fibre Channel traceroute to
identify the exact path and timing of flows, and Switched Port Analyzer (SPAN) and Remote SPAN (RSPAN) to
intelligently capture network traffic. Captured Fibre Channel traffic can be analyzed with the embedded Cisco
Fabric Analyzer. Comprehensive port-based and flow-based statistics enable sophisticated performance analysis
and service-level agreement (SLA) accounting.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 10
Comprehensive Solution for Robust Security
Addressing the need for fool-proof security in storage networks, the Cisco MDS 9700 Series 16-Gbps Fibre
Channel line card offers an extensive security framework to protect the highly sensitive data crossing today’s
enterprise networks. The Cisco MDS 9700 employs intelligent packet inspection at the port level, including the
application of ACLs for hardware enforcement of zones, VSANs, and advanced port security features. VSANs are
used to achieve higher security and greater stability by providing complete isolation of devices that are connected
1
to the same physical SAN. IVR enables controlled sharing of resources between VSANs. In addition, FC-SP
provides switch-to-switch and host-to-switch Diffie-Hellman Challenge Handshake Authentication Protocol
(DH-CHAP) authentication supporting RADIUS or TACACS+ to help ensure that only authorized devices access
protected storage networks. Cisco TrustSec
®1
Fibre Channel link encryption, available on the Cisco MDS 9700
Series 16-Gbps modules, allows you to transparently encrypt ISLs at up to line-rate speeds, providing an
additional layer of protection for traffic within and between data centers. The Cisco MDS 9700 supports a fabric
binding feature that helps ensure that ISLs are enabled only between specified switches in the fabric binding
configuration.
Integrated Mainframe Support (Supported in a Future Software Release)
1
The Cisco MDS 9700 is mainframe ready, with full support for IBM System z FICON and Linux environments. The
Cisco MDS 9700 supports transport of the FICON protocol in both cascaded and noncascaded fabrics, as well as
an intermix of FICON and open systems Fibre Channel Protocol traffic on the same switch.
Product Specifications
Table 1 lists the product specifications for the Cisco MDS 9700 Series 16-Gbps Fibre Channel switching modules.
Table 1.
Technical Specifications
Feature
Description
Product compatibility
● Cisco MDS 9700 Series Multilayer Directors
Software compatibility
● Cisco MDS 9000 NX-OS Software Release 6.2.1 or later
Protocols
● Fibre Channel standards
◦
FC-PH, Revision 4.3 (ANSI INCITS 230-1994)
◦
FC-PH, Amendment 1 (ANSI INCITS 230-1994/AM1-1996)
◦
FC-PH, Amendment 2 (ANSI INCITS 230-1994/AM2-1999)
◦
FC-PH-2, Revision 7.4 (ANSI INCITS 297-1997)
◦
FC-PH-3, Revision 9.4 (ANSI INCITS 303-1998)
◦
FC-PI, Revision 13 (ANSI INCITS 352-2002)
◦
FC-PI-2, Revision 10 (ANSI INCITS 404-2006)
◦
FC-PI-3, Revision 4 (ANSI INCITS 460-2011)
◦
FC-PI-4, Revision 8 (ANSI INCITS 450-2008)
◦
FC-PI-5, Revision 6 (ANSI INCITS 479-2011)
◦
FC-FS, Revision 1.9 (ANSI INCITS 373-2003)
◦
FC-FS-2, Revision 1.01 (ANSI INCITS 424-2007)
◦
FC-FS-2, Amendment 1 (ANSI INCITS 424-2007/AM1-2007)
◦
FC-FS-3, Revision 1.11 (ANSI INCITS 470-2011)
◦
FC-LS, Revision 1.62 (ANSI INCITS 433-2007)
◦
FC-LS-2, Revision 2.21 (ANSI INCITS 477-2011)
◦
FC-SW-2, Revision 5.3 (ANSI INCITS 355-2001)
◦
FC-SW-3, Revision 6.6 (ANSI INCITS 384-2004)
◦
FC-SW-4, Revision 7.5 (ANSI INCITS 418-2006)
◦
FC-SW-5, Revision 8.5 (ANSI INCITS 461-2010)
◦
FC-GS-3, Revision 7.01 (ANSI INCITS 348-2001)
◦
FC-GS-4, Revision 7.91 (ANSI INCITS 387-2004)
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 10
Feature
Description
◦
FC-GS-5, Revision 8.51 (ANSI INCITS 427-2007)
◦
FC-GS-6, Revision 9.4 (ANSI INCITS 463-2010)
◦
FCP, Revision 12 (ANSI INCITS 269-1996)
◦
FCP-2, Revision 8 (ANSI INCITS 350-2003)
◦
FCP-3, Revision 4 (ANSI INCITS 416-2006)
◦
FCP-4, Revision 2b (ANSI INCITS 481-2011)
◦
FC-SB-2, Revision 2.1 (ANSI INCITS 349-2001)
◦
FC-SB-3, Revision 1.6 (ANSI INCITS 374-2003)
◦
FC-SB-3, Amendment 1 (ANSI INCITS 374-2003/AM1-2007)
◦
FC-SB-4, Revision 3.0 (ANSI INCITS 466-2011)
◦
FC-BB-2, Revision 6.0 (ANSI INCITS 372-2003)
◦
FC-BB-3, Revision 6.8 (ANSI INCITS 414-2006)
◦
FC-BB-4, Revision 2.7 (ANSI INCITS 419-2008)
◦
FC-BB-5, Revision 2.0 (ANSI INCITS 462-2010)
◦
FC-VI, Revision 1.84 (ANSI INCITS 357-2002)
◦
FC-SP, Revision 1.8 (ANSI INCITS 426-2007)
◦
FC-SP-2, Revision 2.71 (ANSI INCITS 496-2012)
◦
FAIS, Revision 1.03 (ANSI INCITS 432-2007)
◦
FAIS-2, Revision 2.23 (ANSI INCITS 449-2008)
◦
FC-IFR, Revision 1.06 (ANSI INCITS 475-2011)
◦
FC-FLA, Revision 2.7 (INCITS TR-20-1998)
◦
FC-PLDA, Revision 2.1 (INCITS TR-19-1998)
◦
FC-Tape, Revision 1.17 (INCITS TR-24-1999)
◦
FC-MI, Revision 1.92 (INCITS TR-30-2002)
◦
FC-MI-2, Revision 2.6 (INCITS TR-39-2005)
◦
FC-MI-3, Revision 1.03 (INCITS TR-48-2012)
◦
FC-DA, Revision 3.1 (INCITS TR-36-2004)
◦
FC-DA-2, Revision 1.06 (INCITS TR-49-2012)
◦
FC-MSQS, Revision 3.2 (INCITS TR-46-2011)
● Fibre Channel classes of service: Class 2, Class 3, and Class F
● Fibre Channel standard port types: E, F, FL, and B
● Fibre Channel enhanced port types: SD, ST, and TE
Cards, ports, and slots
● 48 autosensing 2/4/8-Gbps or 4/8/16-Gbps Fibre Channel ports
● 48 10-Gbps Fibre Channel ports
Features and Functions
Fabric services
● Name server
● Registered State Change Notification (RSCN)
● Login services
● Fabric Configuration Server (FCS)
● Public loop
● Broadcast
● In-order delivery
Advanced functions
● VSAN
● IVR
● PortChannel with Multipath Load Balancing
● Flow-based and zone-based QoS
● NPIV
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 10
Feature
Diagnostics and
troubleshooting tools
Description
● POST diagnostics
● Online diagnostics
● Internal port loopbacks
● SPAN and RSPAN
● Fibre Channel Traceroute
● Fibre Channel Ping
● Fibre Channel Debug
● Cisco Fabric Analyzer
● Syslog
● Online system health
● Port-level statistics
● Real-Time Protocol Debug
Network security
● VSANs
● ACLs
● Per-VSAN RBAC
● Fibre Channel zoning
◦
N-port Worldwide Name (WWN)
◦
N-port Fibre Channel ID (FC-ID)
◦
Fx-port WWN
◦
Fx-port WWN and interface index
◦
Fx-port domain ID and interface index
◦
Fx-port domain ID and port number
◦
Logical unit number (LUN)
● Fibre Channel Security Protocol (FC-SP) 1
◦
DH-CHAP switch-to-switch authentication
◦
DH-CHAP host-to-switch authentication
● Port Security and Fabric Binding
● Management access
◦
SSHv2 implementing Advanced Encryption Standard (AES)
◦
SNMPv3 implementing AES
◦
SFTP
● Cisco TrustSec1 Fibre Channel Link Level Encryption
◦
FICON
1
SSHv2 implementing AES
● FC-SB-3 compliant
● Cascaded FICON fabrics
● Intermix of FICON and Fibre Channel FCP traffic
● FICON Control Unit Port (CUP) management interface
Serviceability
● Configuration file management
● Nondisruptive software upgrades for Fibre Channel interfaces
● Cisco Call Home
● Power-management LEDs
● Port beaconing
● System LED
● SNMP traps for alerts
● Network boot
Performance
● Port speed: 2/4/8-Gbps and 4/8/16-Gbps autosensing, optionally configurable for 10-Gbps Fibre Channel
● Buffer credits: Up to 500 per port and up to 4095 on an individual port (with optional Cisco Enterprise
Package license activated)
● PortChannel: Up to 16 ports
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 10
Feature
Description
Supported Cisco optics, media,
and transmission distances
Speed
Media
Distance
16-Gbps SW, LC, SFP+
50/125-micron multimode
125m
16-Gbps SW, LC, SFP+
62.5/125-micron multimode
15m
16-Gbps LW, LC, SFP+
9/125-micron single-mode
10 km
10-Gbps SW, LC, SFP+
50/125-micron multimode
300m
10-Gbps SW, LC, SFP+
62.5/125-micron multimode
33m
10-Gbps LW, LC, SFP+
9/125-micron single-mode
10 km
8-Gbps SW, LC, SFP+
50/125-micron multimode
150m
8-Gbps SW, LC, SFP+
62.5/125-micron multimode
21m
8-Gbps LW, LC, SFP+
9/125-micron single-mode
10 km
8-Gbps ER, LC, SFP+
9/125-micron single-mode
40 km
10-GbE SR, LC, SFP+
50/125-micron multimode
300m
10-GbE LR, LC, SFP+
9/125-micron multimode
10 km
10-GbE ER, LC, SFP+
9/125-micron multimode
40 km
Reliability and availability
● Hot-swappable module
● Hot-swappable SFP+ transceivers
● Online diagnostics
● Stateful Process Restart
● Nondisruptive Supervisor Failover
● Any module, any port configuration for PortChannels
● Fabric-based multipathing
● Per-VSAN fabric services
● Port Tracking
● Virtual Routing Redundancy Protocol (VRRP) for management
Network management
● Access methods through Cisco MDS 9700 Series Supervisor Module
◦
Out-of-band 10/100/1000 Ethernet port (Supervisor-1)
◦
RS-232 serial console port
◦
In-band IP over Fibre Channel
● Access methods through Cisco MDS 9700 Series Fibre Channel Switching Module
◦ In-band FICON CUP over Fibre Channel
● Access protocols
◦
Command-line interface (CLI) through console and Ethernet ports
◦
SNMPv3 through Ethernet port and in-band IP over Fibre Channel access
◦
FICON CUP
● Distributed Device Alias service
● Network security
◦
Per-VSAN RBAC using RADIUS- and TACACS+-based authentication, authorization, and accounting
(AAA) functions
◦
SFTP
◦
SSHv2 implementing AES
◦
SNMPv3 implementing AES
● Management applications
Programming interfaces
◦
Cisco MDS 9000 Family CLI
◦
Cisco Fabric Manager
◦
Cisco Device Manager
● Scriptable CLI
● Cisco Prime Data Center Network Manager web services API
● Cisco Prime DCNM GUI
Environmental
● Temperature, ambient operating: 32 to 104°F (0 to 4 0°C)
● Temperature, ambient nonoperating and storage: -40 to 158°F (-40 to 70°C)
● Relative humidity, ambient (noncondensing) operating: 10 to 90%
● Relative humidity, ambient (noncondensing) nonoperating and storage: 10 to 95%
● Altitude, operating: -197 to 6500 ft (-60 to 2000m)
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 10
Feature
Description
Physical dimensions
● Dimensions (H x W x D): 1.75 x 15.9 x 21.8 in. (4.4 x 40.39 x 55.37 cm)
● Weight: 17 lb (7.71 kg)
Approvals and compliance
● Regulatory compliance
◦ CE Markings per directives 2004/108/EC and 2006/95/EC
● Safety compliance
◦
UL 60950-1 Second Edition
◦
CAN/CSA-C22.2 No. 60950-1 Second Edition
◦
EN 60950-1 Second Edition
◦
IEC 60950-1 Second Edition
◦
AS/NZS 60950-1
◦
GB4943 2001
● EMC compliance
◦
47CFR Part 15 (CFR 47) Class A
◦
AS/NZS CISPR22 Class A
◦
CISPR22 Class A
◦
EN55022 Class A
◦
ICES003 Class A
◦
VCCI Class A
◦
EN61000-3-2
◦
EN61000-3-3
◦
KN22 Class A
◦
CNS13438 Class A
◦
EN55024
◦
CISPR24
◦
EN300386
◦
KN24
Ordering Information
Table 2 provides ordering information for the Cisco MDS 9700 Series 48-Port 16-Gbps Fibre Channel Switching
Module.
Table 2.
Ordering Information
Part Number
Product Description
DS-X9448-768K9
48-Port 16-Gbps Fibre Channel Switching Module
DS-SFP-FC16G-SW
16 Gbps Fibre Channel SW SFP+, LC
DS-SFP-FC16G-LW
16 Gbps Fibre Channel LW SFP+, LC
DS-SFP-FC10G-SW
10 Gbps Fibre Channel SW SFP+, LC
DS-SFP-FC10G-LW
10 Gbps Fibre Channel LW SFP+, LC
DS-SFP-FC8G-SW
8 Gbps Fibre Channel SW SFP+, LC
DS-SFP-FC8G-LW
8 Gbps Fibre Channel LW SFP+, LC
DS-SFP-FC8G-ER
8 Gbps Fibre Channel Extended Reach SFP+, LC
SFP-10G-SR
10GBASE-SR SFP Module
SFP-10G-LR
10GBASE-LR SFP Module
SFP-10G-ER
10GBASE-ER SFP Module
2
2
2
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 10
Part Number
Product Description
Spare Components
DS-X9448-768K9=
48-Port 16-Gbps Fibre Channel Switching Module
DS-X9448768B8K9=
MDS 9700 48-port 16Gbps FC Module + 48 8-Gbps SW SFP+, Spare
DS-X9448768BSK9=
MDS 9700 48-port 16Gbps FC Module + 48 16-Gbps SW SFP+, Spare
DS-SFP-FC16G-SW=
16 Gbps Fibre Channel SW SFP+, LC
DS-SFP-FC16G-LW=
16 Gbps Fibre Channel LW SFP+, LC
DS-SFP-FC10G-SW=
10 Gbps Fibre Channel SW SFP+, LC
DS-SFP-FC10G-LW=
10 Gbps Fibre Channel LW SFP+, LC
DS-SFP-FC8G-SW=
8 Gbps Fibre Channel SW SFP+, LC
DS-SFP-FC8G-LW=
8 Gbps Fibre Channel LW SFP+, LC
DS-SFP-FC8G-ER=
8 Gbps Fibre Channel Extended Reach SFP+, LC
SFP-10G-SR=
10GBASE-SR SFP Module2
SFP-10G-LR=
10GBASE-LR SFP Module2
SFP-10G-ER=
10GBASE-ER SFP Module2
1
2
This feature will be supported in a future software release.
10G Ethernet optics use Etnernet clock rates but the pipe carries 10G FC traffic.
For More Information
For more information about the Cisco MDS 9700 Series Fibre Channel switching modules, visit
http://www.cisco.com/go/storage or contact your local account representative.
For detailed information about supported optics, see Cisco MDS 9000 Family Pluggable Transceivers.
Printed in USA
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-727817-01
10/13
Page 10 of 10
Download PDF

advertising