HPE BladeSystem c7000 Enclosure

QuickSpecs
HPE BladeSystem c7000 Enclosure
Overview
HPE BladeSystem c7000 Enclosure
HPE BladeSystem c7000 Enclosure - Front View
1-16. Device Bays 1-16
17-22. Power Supply Bays 1-6
23.
Insight Display
HPE BladeSystem c7000 Enclosure - Rear View
1. Active Cool 200 Fans and Fan Bays
2. Interconnect Module Bays
3. BladeSystem Onboard Administrator (left) and optional
redundant Onboard Administrator (right)
4. Power Inputs (single-phase 200-240V AC model shown)
Page 1
QuickSpecs
HPE BladeSystem c7000 Enclosure
Standard Features
HPE BladeSystem An HPE BladeSystem solution starts with either a BladeSystem c7000 or c3000 enclosure. For the c7000
enclosure, key enclosure options include hot-plug power supplies, power input module, hot-plug HPE Active
c-Class c7000
Cool Fans, and an optional redundant BladeSystem Onboard Administrator module. Once the enclosure and its
Enclosure
key components have been selected, the following components can be added: interconnect modules, HPE
ProLiant or Integrity server blades, expansion blades, and HPE OneView or Insight Control management
software. For information on these options please visit: https://www.hpe.com/us/en/integratedsystems/bladesystem.html
NOTE: Insight Control is not supported with Gen10 server blades.
A BladeSystem c7000 Enclosure holds up to 16 server blades and up to 8 compute, storage or workstation
blades plus redundant network and storage interconnects. It includes a shared, multi-terabit high-speed
midplane for wire-once connectivity of server blades to network and shared storage. Power is delivered through
a pooled power backplane that ensures the full capacity of the redundant hot-plug power supplies is available
to all system components.
Each c7000 enclosure is built with the following functions:
• Up to 16 half-height server blades, 8 full-height server blades, and/or 8 expansion blades per
enclosure (not exceeding 16 total blades).
NOTE: For information on mixing half-height server blades, full-height server blades, and expansion
blades, please see the section titled "Device Bay and Fan Bay Numbering and Population Guidelines"
later in this document.
• Up to 4 redundant interconnect I/O fabrics (Ethernet, Fibre Channel, InfiniBand, iSCSI, SAS, etc.)
supported simultaneously within the enclosure.
• Choice of single-phase high-line AC, three-phase high-line AC, single-phase high voltage AC, -48V DC,
or high voltage DC power options for flexibility in connecting to datacenter power.
• HPE Thermal Logic technology to minimize power consumption and reduce cooling.
• A minimum of four hot-plug HPE Active Cool 200 Fans. For additional capacity, redundancy, and
improved power consumption and acoustics, Active Cool 200 Fan kits can be added for a maximum of
10 fans.
• Redundant hot-plug cooling, redundant hot-plug power supplies, redundant connections, redundant
interconnect modules, and optional redundant BladeSystem Onboard Administrator management
module.
An BladeSystem Onboard Administrator management module is built in to the enclosure with the following
functions:
• Robust, multiple enclosure setup and control.
• Reports asset and inventory information for the devices in the enclosure.
• Reports thermal and power information, including real-time actual power usage per server and per
enclosure.
• Front-mounted Insight Display for easy management within the datacenter.
• Integrated access to all server blade iLOs from a single cable.
• Provides integrated access to interconnect bay device management ports from the single BladeSystem
Onboard Administrator cable.
• Single sign-on capability for all devices in the enclosure
• Role-based security locally and/or with LDAP directory services.
• Provides a wizard-based initial setup process for easy configuration.
A BladeSystem c7000 enclosure provides the following benefits:
• With local and remote hardware management integrated across the solution, one full enclosure can be
managed as easily as one server.
• Management and network interconnects extend scalability beyond a single enclosure, allowing
resources to be pooled and shared across multiple enclosures.
Page 2
QuickSpecs
HPE BladeSystem c7000 Enclosure
Standard Features
•
•
•
•
•
•
Accommodates multiple server and network designs in one enclosure.
Lower costs per server in comparison to rack-mounted servers.
Lower power consumption in comparison to rack-mounted servers.
Lower airflow requirements in comparison to rack-mounted servers.
Reduced and simplified cabling in comparison to rack-mounted servers.
Investment protection supporting G1 through Gen9 server blades.
HPE BladeSystem For customers that need a smaller blade system, the HPE BladeSystem c-Class c3000 Enclosure is the perfect
solution. Supporting up to 8 blades and 4 interconnects, the c3000 enclosure provides an ideal solution for
c-Class c3000
small and medium businesses and remote sites. For more information please visit:
Enclosure
https://www.hpe.com/us/en/integrated-systems/bladesystem.html
HPE ProLiant &
Integrity Server
Blades
Delivering best-in-class performance, choice and reliability on Intel® Xeon® and Intel® Itanium ® processors for
Windows, Linux, Solaris, OpenVMS or HP-UX based servers; the HPE portfolio of server blades supports a
variety of application requirements for scale-out architectures. Hewlett Packard Enterprise offers one-, two-,
four- , or eight processor server blades, with the widest range of performance, and form factors. For more
information please visit: https://www.hpe.com/us/en/integrated-systems/bladesystem.html.
HPE D2200sb
Storage Blade
Do you need a direct attached or shared storage solution within your BladeSystem enclosure?
Direct attached storage
The D2220sb Storage Blade delivers direct attached storage for c-Class Gen8 and greater server blades with
support for up to twelve hot plug small form factor (SFF) SAS or SATA Midline hard disk drives or SAS/SATA
SSDs. The enclosure backplane provides a PCI Express connection to an adjacent c-Class server blade and
enables high performance storage access without any additional cables. The D2220sb Storage Blade features
an onboard Smart Array P420i controller with 2GB flash-backed write cache for increased performance and
data protection. Up to eight D2220sb storage devices can be supported in a single BladeSystem c7000
Enclosure for up to 115.2 TB of capacity.
Two ways to create shared storage with the D2220sb
Use HPE StoreVirtual VSA software to turn the D2220sb into an iSCSI SAN for use by all servers in the
enclosure and any server on the network. HPE VSA software is installed in a virtual machine on a VMware ESX
host server adjacent to the D2220sb. HPE StoreVirtual VSA turns the D2220sb into a scalable and robust
iSCSI SAN, featuring storage clustering for scalability, network RAID for storage failover, thin provisioning,
snapshots, remote replication, and cloning. Expand capacity within the same enclosure or to other BladeSystem
enclosures by adding additional D2220sb Storage Blades and HPE VSA licenses. A cost effective bundle of the
D2220sb Storage Blade and a HPE StoreVirtual VSA license makes purchasing convenient. If storage needs
increase, add HPE P4300 or P4500 systems externally and manage everything via a single pane of glass.
The HPE StoreEasy 3830 and 3840 Gateway Storage Blades are flexible storage server solutions for
BladeSystem environments. Combine the StoreEasy 3830 or 3840 with the D2220sb Storage Blade to enable
file serving and iSCSI shared storage inside the BladeSystem enclosure.
NOTE: The D2220sb requires a c7000 Enclosure configuration with 10 fans.
For more information, please visit:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111399.
HPE Ultrium Tape Tape blades are ideal for HPE BladeSystem c-Class customers who need a data protection solution but are not
connected into a storage area network (SAN). They provide direct attach data protection for the adjacent
Blades
server and network backup protection for all other data within the enclosure. The HPE tape blades are the
industry's first bladed tape drives and are developed exclusively for the BladeSystem c-Class enclosures.
Page 3
QuickSpecs
HPE BladeSystem c7000 Enclosure
Standard Features
For more information, please visit:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154444.
Dynamic Power
Capping
HPE Dynamic Power Capping is the industry's first power capping solution that lets you reclaim trapped power
and cooling capacity without putting electrical infrastructure or server performance at risk. The enclosure
Dynamic Power Cap will be shared amongst all of the installed devices and individual server caps will be
changed to match the server load. This will optimize the performance of the servers while ensuring that the
enclosure stays below the cap value. See more in your Onboard Administrator documentation.
Rack Airflow
Requirements
Rack 10000 G2 series cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for
rack-mounted servers. The G2 10000 Series Racks provide enhanced airflow for maximum cooling, allowing
these racks to be fully loaded with servers using the latest processors.
NOTE: For operation with the -48VDC input module, the G2 1000 Series Rack Extension is required to allow
DC power cabling to be installed.
CAUTION: For the complete list of installation requirements, please see the “HPE BladeSystem c-Class Site
Planning Guide” at http://www.hpe.com/support/hpesc.
Third-party racks
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate
airflow and to prevent damage to the equipment:
• Front and rear doors: If your server rack includes closing front and rear doors, you must have a
minimum of 65% free area compared to the total area of the door evenly distributed from top to
bottom to permit adequate airflow.
• Front door: The clearance from face of rack to inside of the front door must be a minimum of 77 mm
(3 in).
• Rear door: The clearance between the rear of the enclosure and the rear rack door must be a
minimum of 175 mm (6.9 in) to accommodate system cabling.
• Side: The clearance between the installed rack component and the side panels of the rack must be a
minimum of 70 mm (2.75 in).
• Width: 483 mm (19 in)
• Depth: Maximum clearance between front and rear RETMA rails is 864 mm (34 in). Minimum
clearance for round-hole racks is 627 mm (24.7 in). Minimum clearance for square-hole racks is 635
mm (25 in).
• The rack must be able to accept the adjustable rack rails that are shipped with each enclosure:
− Minimum rail length: 635 mm (25 in)
− Maximum rail length: 864 mm (34 in)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that
can lead to thermal damage.
CAUTION: For the complete list of installation requirements, please see the “HPE BladeSystem c-Class Site
Planning Guide” at http://www.hpe.com/support/hpesc.
Factory Express
Portfolio for
Servers and
Storage
HPE Factory Express offers configuration, customization, integration and deployment services for Hewlett
Packard Enterprise servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration
and design services as well as individual factory services, such as image loading, asset tagging and custom
packaging. Hewlett Packard Enterprise products supported through Factory Express include: a wide array of
servers and storage: HPE Integrity, HPE ProLiant & HPE ProLiant & Integrity Server Blades, HPE BladeSystem,
HPE 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
Page 4
QuickSpecs
HPE BladeSystem c7000 Enclosure
Standard Features
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hpe.com/info/factoryexpress
HPE Simple
Configurator
HPE One Config Simple (OCS) is a guided self-service tool to help sales and non-technical people provide
customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for
configuration help, or use in your existing ordering processes. If you require "custom" rack configuration or
configuration for products not available in OCS, please contact HPE's Customer Business Center or an
Authorized Partner for assistance. https://h22174.www2.hpe.com/SimplifiedConfig/Welcome.
HPE OneView
Software
The HPE OneView architecture combines server, storage, and networking with control of datacenter
environmentals into a single, integrated management platform. Architected to deliver lifecycle
management for the complete Converged Infrastructure, it facilitates collaboration, removes friction, collapses
cycle times, eliminates error-prone work, and accelerates time to value. HPE OneView combines management
of servers and virtual connect with open integration to automate and customize existing tools and processes.
With OneView, you'll work smarter-with greater visibility and control-and fully capitalize on the benefits of a
Converged Infrastructure.
For more information on Hewlett Packard Enterprise OneView management, see:
https://www.hpe.com/us/en/product-catalog/detail/pip.5410258.html.
HPE Insight
Management
software
Insight Management Managing the growing number of servers can be complex and expensive for your
organization. IT managers need to address changing business needs with tools that
meet the challenges of managing today's complex Datacenters.
HPE Insight Management lowers the cost of running your HPE ProLiant servers by
providing you with best-in-class management tools, including HPE Insight Control, HPE
Virtual Connect Enterprise Manager (VCEM), and HPE Insight Dynamics / Matrix
Operating Environment. Insight Management increases your productivity and reduces
your operating costs to get you higher value from your HPE ProLiant servers.
Electronic download of Insight Management Media
Insight Management software media is available for free download (not including
license entitlement certificates) at this website:
http://www.hpe.com/info/servermanagement
Software media available for download includes:
• HPE Insight Control
• HPE Insight Control for Microsoft® System Center
• HPE Insight Control for VMware vCenter Server
• HPE Virtual Connect Enterprise Manager (VCEM)
• HPE Insight Dynamics / Matrix Operating Environment
Customers will receive an Insight Control or Insight Dynamics license entitlement
certificate via physical shipment or email. The license entitlement certificate must be
redeemed online or via fax in order to obtain the license activation key(s).
One year of 24x7 Software Technical Support and Updates are included with your
purchased licenses.
Hewlett Packard Enterprise provides a complete range of installation and support
services to ensure the successful deployment and operations of your server
Page 5
QuickSpecs
HPE BladeSystem c7000 Enclosure
Standard Features
infrastructure. For more information about support services and licensing options, see
the following website: http://www.hpe.com/info/servermanagement
Insight Software Media Kit (DVDs)
Physical media (DVDs) are also available for purchase from Hewlett Packard Enterprise
or from your authorized reseller
NOTE: Insight Management is not supported with Gen10 server blades.
Service Pack for
ProLiant (SPP)
Customers should use the HPE Service Pack for ProLiant (SPP) to perform firmware,
driver, and related software updates: https://www.hpe.com/servers/spp/
HPE Integrated
Lights-Out (iLO)
HPE Integrated Lights-Out (iLO) simplifies server setup, health monitoring, power and
thermal control, and lights-out remote administration of ProLiant ML, DL, and BL
servers. HPE iLO functions without additional software and can be accessed from any
location via a web browser. HPE iLO works hand-in-hand with HPE Systems Insight
Manager, Insight Control and Insight Dynamics for ProLiant, helping customers unleash
the value of the ProLiant platform and deliver the highest possible quality of IT service.
For more information, visit: http://www.hpe.com/info/ilo
HPE Insight Control
HPE Insight Control, a product option, delivers essential infrastructure management
that can help save time and money by making it easy to deploy, monitor, remote
control, and optimize your IT infrastructure through a single, simple management
console. For more information, see http://www.hpe.com/info/servermanagement..
HPE Insight Control includes one year of 24 x 7 HPE Software Technical Support and
Update Service ensuring rapid access to Hewlett Packard Enterprise support staff and
proactive delivery of software updates. For more information about this service, please
visit: http://www.hpe.com/us/en/services/foundation-care-services.html.
NOTE: Insight Control is not supported with Gen10 server blades.
HPE Matrix
Operating
Environment
The HPE Matrix Operating Environment (Matrix OE) for ProLiant and Integrity servers
is an integrated command center that helps you instantly adjust to dynamic business
demands. This advanced infrastructure management software lets you reduce the cost
of common data center tasks by up to 40 percent while keeping pace with your
changing business.
The HPE Matrix OE includes the automated provisioning, optimization, and recovery
management capabilities for HPE CloudSystem Matrix, the ideal platform for private
cloud and Infrastructure as a Service (IaaS).
NOTE: For more information, visit: http://www.hpe.com/info/matrixoe.
HPE Power
Advisor
The HPE Power Advisor is a tool provided by Hewlett Packard Enterprise to assist in the estimation of power
consumption at power up of a system and proper selection of components including power supplies at a
system, rack, and multi-rack level. A variety of additional features are also provided including a condensed bill of
materials, a cost of owner ship calculator, and a power report. The HPE Power Advisor allows for the mixing of
rack, tower, blade, and other products in a single environment.
HPE highly recommends using the HPE Power Advisor tool to ensure the number of power supply options you
have selected can fully support your BladeSystem configuration and to review maximum system power ratings
for facilities planning purposes.
HPE Power Advisor is available at: http://www.hpe.com/go/hppoweradvisor
Page 6
QuickSpecs
HPE BladeSystem c7000 Enclosure
Standard Features
Warranty
Warranty - This product is covered by a global limited warranty and supported by HPE Services and a
worldwide network of Hewlett Packard Enterprise Authorized Channel Partners. Hardware diagnostic support
and repair is available for three years from date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Additional support may be covered under the warranty or available for an
additional fee. Enhancements to warranty services are available through HPE Pointnext operational services or
customized service agreements.
• Enclosure: Three-year parts and labor, on-site limited global warranty. Certain restrictions and
exclusions apply
• Enclosure options: Fans, power supplies, BladeSystem Onboard Administrator, 1 year parts only or
enclosure warranty
• HPE BladeSystem Interconnects: 1 year parts and labor, on-site regardless of the warranty period for
the system in which they are installed
• HPE Storage Fibre Channel switches have a maximum warranty period of one (1) year regardless of
the warranty period for the system in which they are installed
• Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs for
details.
Page 7
QuickSpecs
HPE BladeSystem c7000 Enclosure
Service and Support
Service and
Support
HPE Technology Services for Industry Standard Servers
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our support
technology lets you to tap into the knowledge of millions of devices and thousands of experts to stay informed
and in control, anywhere, any time.
Protect your business beyond warranty with HPE Pointnext operational services
HPE Pointnext operational services enable you to order the right service level, length of coverage and response
time as you purchase your new server, giving you full entitlement for the term you select.
NOTE: Power supplies are covered as a part of the server infrastructure. No separate care packs need to be
purchased.
Connect your
devices to HPE:
Unlock all of the benefits of your technology investment by connecting your products to HPE. Achieve up to
77% reduction in down time, near 100% diagnostic accuracy and a single consolidated view of your
environment. By connecting, you will receive 24x7monitoring, pre-failure alerts, automatic call logging, and
automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter Care Service customers will also
benefit from proactive activities to help prevent issues and increase optimization. All of these benefits are
already available to you with your server storage and networking products, securely connected to Hewlett
Packard Enterprise support.
HPE Support
Center
Personalized online support portal with access to information, tools and experts to support Hewlett Packard
Enterprise business products. Submit support cases online, chat with Hewlett Packard Enterprise experts,
access support resources or collaborate with peers. Learn more: https://www.hpe.com/us/en/services/itsupport.html
The HPE Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for
live support. Now, you can get access to personalize IT support anywhere, anytime. HPE Insight Remote
Support and HPE Support Center are available at no additional cost with an Hewlett Packard Enterprise
warranty, HPE Care Pack or Hewlett Packard Enterprise contractual support agreement.
NOTE: HPE Support Center Mobile App is subject to local availability.
Parts and
Materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to maintain
the covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product QuickSpecs, or the technical product
data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced
by Hewlett Packard Enterprise due to malfunction.
For more
information
To learn more on HPE ProLiant servers and HPE BladeSystem servers, please contact your Hewlett Packard
Enterprise sales representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
https://www.hpe.com/us/en/integrated-systems/bladesystem.html
Page 8
QuickSpecs
HPE BladeSystem c7000 Enclosure
Pre-configured Models
HPE BladeSystem NOTE: Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models.
c-Class Server
Any additional options purchased will be shipped separately.
Blade Enclosures NOTE: If you desire a custom configuration, please see the "Configuration Information - Factory Integrated
Models" section of this QuickSpecs.
NOTE: Each BladeSystem c7000 Enclosure holds up to 16 half-height server blades, 8 full-height server
blades, and/or 8 expansion blades per enclosure (not exceeding 16 total blades).
HPE BLc7000 Platinum Enclosure with 1 Phase 6 Pwr Supplies 10 Fans ROHS 16 OneView
763850-B21
Licenses
NOTE: The c7000 Platinum Enclosure 763850-B21 includes sixteen (16) HPE OneView
licenses, six (6) 2400W Platinum hot-plug power supplies each with a worldwide 250W
C19 - C20 2.0m jumper cord, a single-phase 200-240V AC Intelligent Power Module, ten
(10) hot-plug Active Cool 200 Fans, an Onboard Administrator with KVM, and the
following blanking panels: 15 device bay, 7 interconnect module bay, and 1 redundant
Onboard Administrator module bay.
HPE BLc7000 Platinum Enclosure with 1 Phase 6 Power Supplies 10 Fans ROHS 16 Insight
681842-B21
Control LTU
NOTE: Insight Control is not supported with Gen10 server blades.
NOTE: The c7000 Platinum Enclosure 681842-B21 includes sixteen (16) HPE Insight
Control licenses, six (6) 2400W Platinum hot-plug power supplies each with a worldwide
250W C19 - C20 2.0m jumper cord, a single-phase 200-240V AC Intelligent Power
Module, ten (10) hot-plug Active Cool 200 Fans, an Onboard Administrator with KVM,
and the following blanking panels: 15 device bay, 7 interconnect module bay, and 1
redundant Onboard Administrator module bay.
HPE BLc7000 Platinum Enclosure w/ 1 Phase 2 Power Supplies 4 Fans ROHS Trial Insight
681840-B21
Control License
NOTE: Insight Control is not supported with Gen10 server blades.
NOTE: The c7000 Platinum Enclosure 681840-B21 includes sixteen (16) HPE Insight
Control trial licenses, two (2) 2400W Platinum hot-plug power supplies each with a
worldwide 250W C19 - C20 2.0m jumper cord, a single-phase 200-240V AC Intelligent
Power Module, four (4) hot-plug Active Cool 200 Fans, an Onboard Administrator with
KVM, and the following blanking panels: 15 device bay, 4 power supply bay, 6 fan bay, 7
interconnect module bay, and 1 redundant Onboard Administrator module bay.
Page 9
QuickSpecs
HPE BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
NOTE: This section lists some of the required and optional steps to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, Hewlett Packard Enterprise recommends contacting your local sales representative for information
on Factory Integrated Model product offerings and requirements.
For a configuration of the HPE BladeSystem, please do the following:
Step 1: Select desired model, configuration, and quantity of HPE ProLiant server and expansion
blades per enclosure (required)
NOTE: Each BladeSystem c7000 Enclosure holds up to 16 half-height server blades, 8 full-height server blades, and/or 8
expansion blades per enclosure (not exceeding 16 total blades).
Step 2: Determine the HPE BladeSystem c-Class Enclosure(s) and choose required options
(One of the following from each list unless otherwise noted)
Select the base server blade enclosure configuration (required)
HPE BladeSystem
BLc7000 c-Class
Server Blade
Enclosures
NOTE: The enclosures listed below include an Onboard Administrator with KVM and four (4) hot-plug Active
Cool 200 Fans. The power module, power supply kits, power cables, interconnects, additional fans, etc. are
added per the steps below.
NOTE: The enclosures listed below include the required blanking panels (device bay, interconnect module,
fan, power, and redundant OA module) as required per the ordered configuration. If the configuration is
modified at a later date, additional blanking panels (ordered separately) may be required.
HPE BLc7000 Platinum Configure-to-order Enclosure with ROHS Trial IC Lic
681844-B21
HPE Integrity BLc7000 CTO Enclosure
AD361D
NOTE: The AD361D enclosure is suggested for configurations primarily used with
Integrity blades.
NOTE: The TAA-compliant enclosure listed below includes two (2) Onboard
Administrators with KVM, six (6) hot-plug power supplies, and ten (10) hot-plug Active
Cool 200 Fans. Additional components are added per the steps below.
HPE BLc7000 TAA-compliant Configure-to-order Platinum Enclosure with 2x Onboard
681844-B22
Admin 6x PS 10x Fans
NOTE: HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet
the needs of US Federal Government customers. These products are either manufactured
or substantially transformed in a designated country.
Select the enclosure power and cooling options (required)
HPE c-Class
Power Systems
c-Class Power Modules (1 per enclosure)
HPE BLc7000 Single Phase FIO Intelligent Power Module
NOTE: This power module is for single phase, high-line 200-240VAC applications and has
six blue IEC-320 C20 power connectors that accept IEC C19-C20 power cables.
NOTE: The blue power connectors indicate HPE Power Discovery Services capability. HPE
Power Discovery Services are enabled when used with a HPE Power Discovery Servicesenabled power system including an Intelligent Power Distribution Unit (iPDU), C19-C20
iPDU cables, and the Platinum power supply kits 733460-B21, 733459-B21, 517521B21, or 588603-B21. See the iPDU, iPDU cable, c-Class Power Supply sections below for
these options.
NOTE: Also accepts standard (non-iPDU) C19 to C20 power cables, but HPE Power
Discovery Services are disabled. One WW 250W C19-C20 2.0m (non-iPDU) cable is
677595-B21
Page 10
QuickSpecs
HPE BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
included per supported power supply. Supported power supplies are listed here.
NOTE: This power module may be used with the power supply kits 733460-B21, 733459B21, 517521-B21, 588603-B21, 517521-B21, or 499243-B21. See the "c-Class Power
Supply" section below for the power supply kits.
HPE BLc7000 1 PH FIO Power Module Option
NOTE: This power module is for single phase, high-line 200-240VAC applications and has
six IEC-320 C20 power connectors that accept IEC C19-C20 power cables. One WW 250W
C19-C20 2.0m (non-iPDU) cable is included per supported power supply. Supported
power supplies are listed here.
NOTE: This power module may be used with the power supply kits 733460-B21, 733459B21, 517521-B21, 588603-B21, 517521-B21, or 499243-B21. See the "c-Class Power
Supply" section below for the power supply kits.
NOTE: This power module disables HPE Power Discovery Services.
HP BLc7000 3 PH NA/JP FIO Power Module Option
NOTE: This power module is for three phase, high-line 200-208VAC applications and has
two 3.05m (10 ft) power cables with NEMA L15-30p connectors.
NOTE: This power module may be used with the power supply kits 733460-B21, 733459B21, 517521-B21, 588603-B21, 517521-B21, or 499243-B21. See the "c-Class Power
Supply" section below for the power supply kits.
NOTE: This power module disables HPE Power Discovery Services.
NOTE: This power module requires a minimum of 3 power supply option kits. For full
redundancy, 6 power supply option kits are required.
HPE BLc7000 -48V DC Power Input Module
NOTE: This power module is for -36VDC to -72VDC applications and has 45DG 4AWG
1/4 2H terminal lug connectors. It is used with the HPE 2250W -48VDC Hot Plug Power
Supply Kit, AH332A. See the "c-Class Power Supply" section below for the power supply
kits.
NOTE: This power module disables HPE Power Discovery Services.
HPE HVDC 1PH AC Power Module BLc FIO Option
NOTE: This power module is for 277VAC and 380VDC applications and has six APP SafD-Grid connectors. It is used with the HPE 2650W Universal Hot Plug Power Supply Kits
(753618-B21 or 753619-B21). See the "c-Class Power Supply" section below for the
power supply kits.
NOTE: Cables are not included and may be ordered separately; see cable options J6X01A,
J6X02A, J6X03A (277VAC applications) and J6W98A, J6W99A, J6X00A (277VAC or
380VDC applications).
NOTE: This power module disables HPE Power Discovery Services.
c-Class Power Supply (Up to 6)
NOTE: HPE highly recommends using the HPE Power Advisor tool to ensure the number
of power supply options you have selected can fully support your BladeSystem
configuration and to review maximum system power ratings for facilities planning
purposes. HPE Power Advisor is available at: http://www.hpe.com/info/hppoweradvisor
NOTE: Each enclosure must include only one type of power supply. Mixing of power
supplies is not supported, except during hot swaps to different level or higher efficient
power supplies. The Onboard Administrator will exhibit a mismatch error due to mixed
power supplies until all power supplies are matched.
NOTE: If a three phase power module is selected (413380-B21), a minimum of 3 power
supply option kits is required. For full redundancy, 6 power supply option kits are required.
NOTE: HPE c7000 enclosure AC power supplies meet 80 PLUS Platinum or Gold power
efficiency requirements: Platinum (94%) and Gold (92%). The 80 PLUS program is a
unique forum that unites electric utilities, the computer industry, and consumers in an
effort to bring energy efficient technology solutions to the marketplace. 80 PLUS
413379-B21
413380-B21
AH331A
753623-B21
Page 11
QuickSpecs
HPE BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
independently tests power supply efficiency and publically posts the results on
https://plugloadsolutions.com/80PlusPowerSupplies.aspx. DC power supplies are not
eligible for 80 PLUS testing; efficiency is per HPE internal testing.
HPE 6X 2650W Performance Platinum Hot Plug FIO Power Supply Kit
NOTE: This power supply kit enables HPE Power Discovery Services when used with the
HPE BLc7000 Single Phase FIO Intelligent Power Module 677595-B21. See the "c-Class
Power Modules" section above for the power modules.
NOTE: Includes a quantity of 6 HPE 2650W Platinum 94% power supplies so a full
enclosure can be configured with a single part number.
NOTE: Includes six WW 250W C19 - C20 2.0m Jumper Cords.
NOTE: This power supply kit meets multiple energy efficiency initiatives: 2650W, 94%:
Climate Savers Computing Initiative PLATINUM and ECOS Consulting 80 PLUS Platinum.
HPE 2650W Performance Platinum Hot Plug Power Supply Kit
NOTE: This power supply kit enables HPE Power Discovery Services when used with the
HPE BLc7000 Single Phase FIO Intelligent Power Module 677595-B21. See the "c-Class
Power Modules" section above for the power modules.
NOTE: Includes one WW 250W C19 - C20 2.0m Jumper Cord.
NOTE: This power supply kit meets multiple energy efficiency initiatives: 2650W, 94%:
Climate Savers Computing Initiative PLATINUM and ECOS Consulting 80 PLUS Platinum.
HPE 6X 2400W Performance Platinum Hot Plug FIO Power Supply Kit
NOTE: This power supply kit enables HPE Power Discovery Services when used with the
HPE BLc7000 Single Phase FIO Intelligent Power Module 677595-B21. See the "c-Class
Power Modules" section above for the power modules.
NOTE: Includes a quantity of 6 HPE 2400W Platinum 94% efficient power supplies so a
full enclosure can be configured with a single part number.
NOTE: Includes six WW 250W C19 - C20 2.0m Jumper Cords.
NOTE: This power supply kit meets multiple energy efficiency initiatives: 2400W, 94%:
Climate Savers Computing Initiative PLATINUM and ECOS Consulting 80 PLUS Platinum.
HPE 2400W Performance Platinum Hot Plug Power Supply Kit
NOTE: This power supply kit enables HPE Power Discovery Services when used with the
HPE BLc7000 Single Phase FIO Intelligent Power Module 677595-B21. See the "c-Class
Power Modules" section above for the power modules.
NOTE: Includes one WW 250W C19 - C20 2.0m Jumper Cord.
NOTE: This power supply kit meets multiple energy efficiency initiatives: 2400W, 94%:
Climate Savers Computing Initiative PLATINUM and ECOS Consulting 80 PLUS Platinum.
HPE 2650W Performance Universal Hot Plug Power Supply Kit
NOTE: This power supply kit disables HPE Power Discovery Services.
NOTE: Compatible with the HPE HVDC 1PH AC Power Module BLc FIO Option 753623B21. See the "c-Class Power Modules" section above for the power modules.
NOTE: Cables are not included and may be ordered separately; see cable options J6X01A,
J6X02A, J6X03A (277VAC applications) and J6W98A, J6W99A, J6X00A (277VAC or
380VDC applications).
HPE 6X 2650W Performance Universal Hot Plug Power Supply Kit
NOTE: This power supply kit disables HPE Power Discovery Services.
NOTE: Compatible with the HPE HVDC 1PH AC Power Module BLc FIO Option 753623B21. See the "c-Class Power Modules" section above for the power modules.
NOTE: Cables are not included and may be ordered separately; see cable options J6X01A,
J6X02A, J6X03A (277VAC applications) and J6W98A, J6W99A, J6X00A (277VAC or
380VDC applications).
NOTE: Includes a quantity of 6 2650W universal power supplies so a full enclosure can be
configured with a single part number.
HPE 2650W Performance -48VDC Platinum Hot Plug Power Supply Kit
733460-B21
733459-B21
517521-B22
588603-B21
753618-B21
753619-B21
789934-B21
Page 12
QuickSpecs
HPE BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
HPE Cooling
Options
NOTE: This power supply kit disables HPE Power Discovery Services.
NOTE: Compatible with the HPE BLc7000 -48V DC Power Input Module AH331A. See the
"c-Class Power Modules" section above for the power modules.
HPE 6X 2650W Performance -48VDC Hot Plug FIO Power Supply Kit
789935-B21
NOTE: This power supply kit disables HPE Power Discovery Services.
NOTE: Compatible with the HPE BLc7000 -48V DC Power Input Module AH331A. See the
"c-Class Power Modules" section above for the power modules.
NOTE: Includes a quantity of 6 2650W -48VDC power supplies so a full enclosure can be
configured with a single part number.
c-Class Active Cool 200 Fan (Up to 6)
NOTE: A minimum of 4 Active Cool 200 Fans is required to a maximum of 10 Active Cool 200 Fans. The
enclosure selected in Step 2 already includes 4 fans allowing up to 6 additional.
NOTE: Ten Active Cool 200 Fans are strongly recommended for maximum cooling efficiency and
redundancy, reduced power consumption, and reduced noise.
NOTE: Enclosures configured with a three-phase power input module require a minimum of 6 Active Cool
200 Fans.
NOTE: Some blade configurations require 10 Active Cool 200 Fans.
NOTE: For the complete list of fan requirements and recommendations, see the “Server Blade and Fan
Population Guidelines” section of this document.
HPE BLc 6X Active Cool 200 Factory Integrated Fan Option
517520-B21
NOTE: This option (517520-B21) includes a quantity of 6 HPE Active Cool 200 Fans so a
full enclosure can be configured with 10 fans using a single part number.
HPE BLc7000 Enclosure HPE Single Active Cool Fan Option Kit
412140-B21
Step 3: Select a software bundle (optional)
(if nothing is selected the enclosure will ship with 16 Insight Control Trial Licenses)
HPE OneView
Software
HPE OneView Advanced with iLO Advanced
(c7000 enclosure required on same purchase order)
NOTE: The following HPE OneView part numbers can only be used when ordered on the
same order as a BladeSystem c7000 enclosure.
HPE OneView including 3yr 24x7 Support Enclosure FIO Bundle 16-server LTU
E5Y41A
Step 4: Select a redundant BladeSystem Onboard Administrator (optional)
HPE BLc7000 Onboard Administrator with KVM Option
HPE c-Class
Enclosure Options NOTE: The HPE c7000 Onboard Administrator (OA) supports the mixing with the HPE
c7000 OA with KVM. The HPE c7000 OA with KVM must be the active OA to provide the
enclosure KVM feature. The KVM menu has an OA CLI button at the bottom, which allows
an OA administrator to log into the OA and be able to force a takeover so the OA with
KVM will become the standby OA. The OA Firmware Sync feature cannot be used to
update mismatched OA modules. Mismatched OA firmware versions between the original
c7000 OA and c7000 OA with KVM require the administrator to use the GUI or CLI to
update the OA from a file (http, ftp, fttp, local client file using the GUI or USB key
containing the OA firmware file).
NOTE: The c7000 enclosure (part numbers 681840-B21, 681842-B21, 681844-B21,
763850-B21, and AD361D) come with a BladeSystem Onboard Administrator with KVM
as standard. Order this part number (456204-B21) when a second redundant
BladeSystem Onboard Administrator is desired for a c7000 enclosure.
NOTE: HPE BladeSystem c3000 and c7000 Enclosures support G1 through Gen9
456204-B21
Page 13
QuickSpecs
HPE BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
ProLiant and Integrity server blades, subject to support requirements of the Onboard
Administrator. If configuring an enclosure with only Gen9 server blades, Onboard
Administrator firmware 4.11 or greater is required. If configuring an enclosure with a mix
of Gen9 and earlier server blades, G6 to Gen9 is supported and requires Onboard
Administrator firmware 4.30 or greater. In addition to these requirements, the Onboard
Administrator firmware must be a version that supports all the components in the
enclosure. Hewlett Packard Enterprise recommends the current firmware whenever
possible for maximum compatibility and stability. Updating the Onboard Administrator
firmware may also require other subsystem firmware upgrades. For further information,
please see the HPE Service Pack for ProLiant (SPP) website and the HPE Support Center
documents “HPE ProLiant Server Blades - Compatibility with HPE BladeSystem c7000
and c3000 Enclosures and Firmware” and other documents related to ProLiant Gen9
Servers and Onboard Administrator firmware issues.
Step 5: Select 1 or more interconnect modules for each enclosure (required)
The following is a list of various HPE BladeSystem c-Class interconnect modules (Virtual Connect, Ethernet, Fibre Channel,
InfiniBand, and SAS interconnects). A pair of interconnects must be ordered if redundancy is required. For detailed interconnect
options, consult the specific interconnect QuickSpecs: https://www.hpe.com/h20195/v2/getpdf.aspx/c04284204.pdf?ver=10
NOTE: Interconnect bays 1 and 2 support the network (i.e. Ethernet capable) interconnects. These bays connect to the included
network adapter ports in the server blades (either embedded ports on G7 and earlier server blades or FlexibleLOM adapter(s)
on Gen8 and later server blades) via the NonStop passive midplane. An enclosure must be configured with at least a network
interconnect in interconnect bay 1.
NOTE: Interconnect bays 3 through 8 support all interconnects. These bays connect to the mezzanine slots in the server blades
via the NonStop passive midplane. Interconnect bays 3 and 4 must contain the same type of interconnect (network, SAN, SAS,
etc) as they connect to the same mezzanine slot. Likewise for interconnect bays 5, 6, 7, and 8.
NOTE: The HPE BladeSystem c-Class interconnects ship as single units unless otherwise noted. Interconnects must be ordered
in quantities of two for redundancy support.
NOTE: Options to specific c-Class interconnects are not included in the list below. Consult the individual interconnect
QuickSpecs to obtain part numbers for interconnect options such as cables, SFPs, etc.
HPE BladeSystem HP Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem
c-Class Network NOTE: Virtual Connect FlexFabric-20/40 F8 modules are supported on c7000 enclosures
Interconnects
with the following SKUs: 5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21.
NOTE: A c7000 enclosure with a 10 fan configuration is required when one or more HPE
Virtual Connect FlexFabric-20/40 F8 module(s) are installed.
HP Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem with TAA
NOTE: Virtual Connect FlexFabric-20/40 F8 modules are supported on c7000 enclosures
with the following SKUs: 5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21.
NOTE: A c7000 enclosure with a 10 fan configuration is required when one or more HPE
Virtual Connect FlexFabric-20/40 F8 module(s) are installed.
HPE Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 Option
NOTE: 662048-B21 includes 2 x HPE Virtual Connect Flex-10/10D modules plus 1 x
VCEM enclosure license. Customer will receive a printed license entitlement certificate and
2 Virtual Connect modules as a single deliverable. The license entitlement certificate must
be redeemed online or via fax to obtain the VCEM license activation key.
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
HPE Virtual Connect FlexFabric 10/24 Enterprise Edition BLc7000 Option
NOTE: 605865-B21 includes 2 x HPE Virtual Connect FlexFabric 10Gb/24-port modules
plus 1 x VCEM BL-c7000 enclosure license. Customer will receive a printed license
entitlement certificate and 2 Virtual Connect modules as a single deliverable. The license
691367-B21
691367-B22
662048-B21
638526-B21
605865-B21
Page 14
QuickSpecs
HPE BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
entitlement certificate must be redeemed online or via fax to obtain the VCEM license
activation key.
HPE Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
HPE 6125G Ethernet Blade Switch
HPE 6125G/XG Ethernet Blade Switch
HPE 1GB Ethernet Pass-Thru Module for c-Class BladeSystem
HPE 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem
HPE 10GbE Ethernet Pass-Thru TAA-compliant Module II for c-Class BladeSystem
HPE 10GBase-T SFP+ Transceiver
HP Cisco B22HP Fabric Extender for BladeSystem c-Class
HP Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class
NOTE: 657787-B21 includes 16 Cisco Fabric Extender Transceivers. These transceivers
can be used to connect the Fabric Extender with a parent Nexus 5000 over optical cable
up to 100 meters using OM3 grade fiber.
HPE SAS Switch
571956-B21
658247-B21
658250-B21
406740-B21
538113-B21
854194-B22
813874-B21
641146-B21
657787-B21
NOTE: The HPE 6Gb SAS switches are supported on c7000 enclosures with the following SKUs: 5XXXXXB21, 6XXXXX-B21, and 7XXXXX-B21.
HPE 6Gb SAS Switch Single Pack for HPE BladeSystem c-Class
BK763A
HPE 6Gb SAS Switch Dual Pack for HPE BladeSystem c-Class
BK764A
HPE BladeSystem NOTE: HPE Fibre Channel interconnect switches and modules supporting up to a 4Gbps internal port
c-Class SAN
downlink speed (connection speed from the server blades to the interconnect) (SKUs 403626-B21) are
supported on all c7000 enclosures.
Interconnects
NOTE: HPE Fibre Channel interconnect switches and modules supporting up to an 8Gbps internal port
downlink speed (connection speed from the server blades to the interconnect) (SKUs 466482-B21, 572018B21, AJ820C, AJ821C, AJ822C, AW563A, and AW564A) are supported on all c7000 enclosures.
NOTE: HPE Fibre Channel interconnect switches and modules supporting up to a 16Gbps internal port
downlink speed (connection speed from the server blades to the interconnect) (SKUs C8S45A, C8S46A,
C8S47A, 751465-B21, and 778720-B21) are supported on c7000 enclosures with the following SKUs:
5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21. A c7000 Platinum enclosure (SKUs 6XXXXX-B21 and
7XXXXX-B21) is required to permit the 16Gbps speed on the internal downlink ports. A c7000 enclosure
with SKU 5XXXXX-B21 will operate the internal ports up to 8Gbps.
HPE Virtual Connect 16Gb 24-port Fibre Channel Module for c-Class BladeSystem
751465-B21
HPE Virtual Connect 16Gb 24-port Fibre Channel TAA Module for c-Class BladeSystem
778720-B21
HPE Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem
466482-B21
HPE Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem
572018-B21
HPE 4GB Fibre Channel Pass-thru Module for c-Class BladeSystem
403626-B21
Brocade 8/12c SAN Switch for BladeSystem c-Class
AJ820C
Brocade 8/24c SAN Switch for BladeSystem c-Class
AJ821C
Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class
AJ822C
Brocade 16Gb/28 SAN Switch for BladeSystem c-Class
C8S46A
Brocade 16Gb/16 SAN Switch for BladeSystem c-Class
C8S45A
Brocade 16Gb/28 SAN Switch Power Pack+ for BladeSystem c-Class
C8S47A
Brocade 8/16Gb Embedded FC Switch 12-port Upgrade LTU
T5517A
HPE BladeSystem NOTE: The HPE QDR InfiniBand Switches are supported on c7000 enclosures with the following SKUs:
InfiniBand
5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21.
NOTE: The HPE FDR InfiniBand Switches are supported on c7000 enclosures with the following SKUs:
Interconnects
686610-B21, 686611-B21, and 7XXXXX-B21.
Page 15
QuickSpecs
HPE BladeSystem c7000 Enclosure
Configuration Information Factory Integrated Models
HPE 4X FDR InfiniBand Managed Switch Module for c-Class BladeSystem
HPE 4X FDR InfiniBand Switch Module for c-Class BladeSystem
648311-B21
648312-B21
Step 6: Select additional options from Related Options section below.
Page 16
QuickSpecs
HPE BladeSystem c7000 Enclosure
Related Options
HPE Data Center NOTE: Additional HPE Data Center racks are available than those listed below. For
Racks
information on the full line of HPE Data Center Racks and rack accessories, please see
http://www.hpe.com/info/rackandpower.
HPE 11000 G2 Series Racks
HPE 42U 600mm x 1075mm Advanced Shock Rack
HPE 42U 600mm x 1200mm Advanced Shock Rack
HPE 48U 600mm x 1075mm Advanced Shock Rack
HPE 42U 800mm x 1200mm Advanced Shock Rack
HPE Intelligent Series Rack
HPE 36U 600mm x 1075mm Enterprise Shock Rack
HPE 42U 600mm x 1075mm Enterprise Shock Rack
HPE 47U 600mm x 1075mm Enterprise Shock Rack
HPE Location Discovery Services
NOTE: For information on Hewlett Packard Enterprise Location Discovery Services, please
see http://www.hpe.com/info/rackandpower.
HPE 47U Location Discovery Kit
HPE 42U Location Discovery Kit
HPE 36U Location Discovery Kit
HPE Power
NOTE: A pair of PDUs must be ordered for AC feed redundancy.
Distribution Units NOTE: Additional HPE Power Distribution Units (PDUs) are available than those listed
below. For a complete list of all HPE PDUs, please visit:
(PDUs)
http://www.hpe.com/info/rackandpower
HPE Basic Power Distribution Units (bPDUs)
HPE Basic 4.9kVA/L6-30P 24A/208V Outlets (24) C13 (6) C19/Vertical NA/JP PDU
HPE Basic 3Ph 8.6kVA/L15-30P 24A/208V Outlets (24) C13 (6) C19/Vertical NA/JP PDU
HPE Basic 3Ph 8.6kVA/L21-30P 24A/120-208V Outlets (24) C13 (3) C19 (3) 520R/Vertical NA/JP PDU
HPE Remote Monitoring Power Distribution Units (mPDUs)
HPE Metered 4.9kVA/L6-30P 24A/208V Outlets (20) C13 (4) C19/Vertical NA/JP PDU
HPE Metered 3Ph 8.6kVA/L15-30P 24A/208V Outlets (18) C13 (3) C19/Vertical NA/JP
PDU
HPE Metered 3Ph 8.6kVA/L21-30P 24A/120-208V Outlets (18) C13 (3) C19 (3) 520R/Vertical NA/JP PDU
HPE Metered 3Ph 14.4kVA/CS8365C 40A/208V Outlets (12) C13 (12) C19/Vertical NA/JP
PDU
HPE Metered 3Ph 16.6kVA/60309 32A-30A 5-wire 24A/230V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (24) C13 (3)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
HPE Metered 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (12) C13 (12)
C19/Vertical NA/JP PDU
HP Environmental Sensor for Remote Monitored and Managed PDUs
NOTE: The HPE Environmental Sensor collects temperature and humidity information in
H6J66A
H6J68A
H6J88A
H6J70A
BW896A
BW904A
BW912A
BW947A
BW946A
BW945A
H5M59A
H5M62A
H5M64A
D9N47A
D9N51A
D9N53A
D9N58A
D9N62A
D9N54A
D9N59A
G9Z07A
E2D53A
Page 17
QuickSpecs
HPE BladeSystem c7000 Enclosure
Related Options
the rack and can be monitored via the local LCD display or remotely using Telnet or a
standard web interface. The sensor can also monitor the status of two user supplied
contact devices.
HPE Intelligent Power Distribution Units (iPDUs)
HPE Intelligent Modular 4.9kVA/L6-30P 24A/208V Outlets (6) C19/Horizontal NA/JP PDU
HPE Intelligent Modular 3Ph 8.6kVA/L15-30P 24A/208V Outlets (6) C19/Horizontal NA/JP
PDU
HPE Intelligent Modular 3Ph 17.3kVA/60309 60A 4-wire 48A/208V (6) C19/Horizontal
NA/JP PDU
HPE Intelligent Modular 3Ph 17.3kVA/IEC 60309 60A 4-wire 48A/208V (12)
C19/Horizontal NA/JP PDU
HPE
Uninterruptible
Power Systems
(UPSs)
HPE Intelligent
Power
Distribution Units
Power cords
(HPE C19 to C20)
NOTE: Additional HPE Uninterruptable Power Systems (UPSs) are available than those
listed here. For a complete list of all HPE UPSs and additional information, please visit
http://www.hpe.com/info/rackandpower.
R5000 Uninterruptible Power System (UPS)
HPE R5000 3U L630 High Voltage NA/JP Uninterruptible Power System
R7000 Uninterruptible Power System (UPS)
HPE R7000 4U 50A High Voltage NA/JP Uninterruptible Power System
HPE R8000/3 Uninterruptible Power System (UPS)
HPE R8000/3 8000kVA Three Phase NA 6U Rackmount Uninterruptible Power System
HPE R12000/3 Uninterruptible Power System (UPS)
HPE R12000/3 12000VA Three Phase NA 6U Rackmount Uninterruptible Power System
AF523A
AF535A
AF460A
AF462A
AF431A
AF429A
NOTE: For additional power cable information, please visit:
http://h18000.www1.hp.com/products/servers/proliantstorage/power-protection/options/powercable.html.
NOTE: Order with HPE Single Phase FIO Intelligent Power Module for c-Class BladeSystem (677595-B21).
These power cables enable Power Discovery Services communications between the HPE BladeSystem c7000
Enclosure and HPE Intelligent PDUs.
NOTE: These power cables are designated by bright blue IEC connectors.
HPE 1.37m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
TK744A
HPE 1.37m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
TK745A
HPE 2.0m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
TK738A
HPE 2.0m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
TK739A
HPE 2.5m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
TK740A
HPE 2.5m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
TK741A
HPE 3.0m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord
TK742A
HPE 3.0m 250V 16A C19-C20 WW 3PC Kit IPD Enabled Jumper Cord
TK743A
HPE C19 - C20 WW 250V 16Amp Flint Gray 1.20m Jumper Cord
HPE Power
Distribution Units HPE C19 - C20 WW 250V 16Amp Flint Gray 2.0m Jumper Cord
Power cords
HPE C19 - C20 WW 250V 16Amp 2.5m Jumper Cord
(HPE C19 to C20)
HPE C19 - C20 WW 250V 16Amp 4.5m Jumper Cord
Additional HPE
power Cords
AF520A
AF522A
HPE High Line Power Cords 200 - 240V AC
HPE C19 -Nema L6-30P US/CA 250V 16Amp 4.5m Power Cord
HPE C19 - Nema L6-20P NA/JP 250V 20Amp High Voltage 3.6m Power Cord
AF575A
AF574A
295633-B22
E7804A
E7805A
AF593A
Page 18
QuickSpecs
HPE BladeSystem c7000 Enclosure
Related Options
HPE High Voltage Power Cords 277V AC, 380V DC
NOTE: Power cables J6W98A, J6W99A, and J6X00A are intended for 277VAC or 380VDC
APP Saf-D-Grid to APP Saf-D-Grid applications.
NOTE: Power cables J6X01A, J6X02A, and J6X03A are intended for 277VAC APP Saf-DGrid to LS-25 applications.
HP SAFDGRID-SAFDGRID 277V 15Amp DC 0.76m Jumper Cord
HP SAFDGRID-SAFDGRID 277V 15Amp DC 1.37m Jumper Cord
HP SAFDGRID-SAFDGRID 277V 15Amp DC 2.0m Jumper Cord
HP SAFDGRID-LS-25 277V 15Amp AC 0.76m Jumper Cord
HP SAFDGRID-LS-25 277V 15Amp AC 1.37m Jumper Cord
HP SAFDGRID-LS-25 277V 15Amp AC 2.0m Jumper Cord
HPE Enclosure
Options
HPE Power
Supplies
HPE BLc7000 Onboard Administrator with KVM Option
NOTE: The HPE c7000 Onboard Administrator (OA) supports the mixing with the HPE
c7000 OA with KVM. The HPE c7000 OA with KVM must be the active OA to provide the
enclosure KVM feature. The KVM menu has an OA CLI button at the bottom, which allows
an OA administrator to log into the OA and be able to force a takeover so the OA with
KVM will become the standby OA. The OA Firmware Sync feature cannot be used to
update mismatched OA modules. Mismatched OA firmware versions between the original
c7000 OA and c7000 OA with KVM require the administrator to use the GUI or CLI to
update the OA from a file (http, ftp, tftp, local client file using the GUI or USB key
containing the OA firmware file).
NOTE: The c7000 enclosure (part numbers 681840-B21, 681842-B21, 681844-B21,
763850-B21, and AD361D) come with a BladeSystem Onboard Administrator with KVM
as standard. Order this part number (456204-B21) when a second redundant
BladeSystem Onboard Administrator is desired for a c7000 enclosure.
HPE BLc7000 10000 Series Rack Shipping Bracket Option
NOTE: The shipping bracket is required when shipping a c7000 enclosure when installed
in a rack. It is not required for normal operation.
HPE c-Class BladeSystem Miscellaneous Blanks Option Kit
NOTE: Contains 1 each of c3000/c7000 Active Cool Fan blank, c3000/c7000
interconnect module blank, c7000 Onboard Administrator blank, c3000 local KVM blank,
c3000 power supply blank, c7000 power supply blank, c3000 DVD blank, and a c3000
mini-divider.
NOTE: This kit is designed to replace lost or damaged blanks, or if reconfiguring an
enclosure where additional blanks are required.
HPE c-Class BladeSystem Bay Blank with Coupler Option
NOTE: This is option contains one half-height device blank and a coupler that can be
used for the c3000 and c7000 enclosures.
NOTE: Order quantity of one 412150-B21 for filling a half-height bay; the coupler is not
used.
NOTE: Order quantity of two 412150-B21 for filling a full-height bay. One coupler is
installed between the two half-height blanks to be connected together to create a fullheight blank.
NOTE: This kit is designed to replace lost or damaged blanks, or if reconfiguring an
enclosure where additional blanks are required.
J6W98A
J6W99A
J6X00A
J6X01A
J6X02A
J6X03A
456204-B21
433718-B21
412148-B21
412150-B21
NOTE: HPE highly recommends using the HPE Power Advisor tool to ensure the number
of power supply options you have selected can fully support your BladeSystem
configuration and to review maximum system power ratings for facilities planning
purposes. HPE Power Advisor is available at: http://www.hpe.com/info/hppoweradvisor
Page 19
QuickSpecs
HPE BladeSystem c7000 Enclosure
Related Options
NOTE: Mixing of power supplies is not supported on BladeSystem c7000 Enclosures,
except during hot swaps to different level power supplies. The Onboard Administrator
will exhibit a mismatch error due to mixed power supplies until all power supplies are
matched.
NOTE: If a three phase power module is selected (413380-B21 or 413381-B21), a
minimum of 3 power supply option kits are required. For full redundancy, 6 power supply
option kits are required.
NOTE: HPE c7000 enclosure AC power supplies meet 80 PLUS Platinum or Gold power
efficiency requirements: Platinum (94%) and Gold (92%). The 80 PLUS program is a
unique forum that unites electric utilities, the computer industry, and consumers in an
effort to bring energy efficient technology solutions to the marketplace. 80 PLUS
independently tests power supply efficiency and publically posts the results on
https://plugloadsolutions.com/80PlusPowerSupplies.aspx. DC power supplies are not
eligible for 80 PLUS testing; efficiency is per HPE internal testing.
HPE 2650W Performance Platinum Hot Plug Power Supply Kit
NOTE: This power supply kit enables HPE Power Discovery Services when used with the
HPE BLc7000 Single Phase FIO Intelligent Power Module 677595-B21. See the "c-Class
Power Modules" section above for the power modules.
NOTE: Includes one WW 250W C19 - C20 2.0m Jumper Cord.
NOTE: This power supply kit meets multiple energy efficiency initiatives: 2650W, 94%:
Climate Savers Computing Initiative PLATINUM and ECOS Consulting 80 PLUS Platinum.
HPE 2400W Performance Platinum Hot Plug Power Supply Kit
NOTE: This power supply kit enables HPE Power Discovery Services when used with the
HPE BLc7000 Single Phase FIO Intelligent Power Module 677595-B21. See the "c-Class
Power Modules" section above for the power modules.
NOTE: Includes one WW 250W C19 - C20 2.0m Jumper Cord.
NOTE: This power supply kit meets multiple energy efficiency initiatives: 2400W, 94%:
Climate Savers Computing Initiative PLATINUM and ECOS Consulting 80 PLUS Platinum.
HPE 2650W Performance Universal Hot Plug Power Supply Kit
NOTE: This power supply kit disables HPE Power Discovery Services.
NOTE: Compatible with the HPE HVDC 1PH AC Power Module BLc FIO Option 753623B21. See the "c-Class Power Modules" section above for the power modules.
NOTE: Cables are not included and may be ordered separately; see cable options
J6X01A, J6X02A, J6X03A (277VAC applications) and J6W98A, J6W99A, J6X00A
(277VAC or 380VDC applications).
HPE 2650W Performance -48VDC Platinum Hot Plug Power Supply Kit
NOTE: This power supply kit disables HPE Power Discovery Services.
NOTE: Compatible with the HPE BLc7000 -48V DC Power Input Module AH331A. See
the "c-Class Power Modules" section above for the power modules.
HPE Cooling
Options
HPE c-Class Active Cool Fan
HPE BLc7000 Enclosure HPE Single Active Cool Fan Option Kit
NOTE: A minimum of 4 Active Cool 200 Fans is required to a maximum of 10 Active Cool
200 Fans.
NOTE: Ten Active Cool 200 Fans are strongly recommended for maximum cooling
efficiency and redundancy, reduced power consumption, and reduced noise.
NOTE: Enclosures configured with a three-phase power input module require a minimum
of 6 Active Cool 200 Fans.
NOTE: Some blade configurations require 10 Active Cool 200 Fans.
NOTE: For the complete list of fan requirements and recommendations, see the “Server
Blade and Fan Population Guidelines” section of this document.
733459-B21
588603-B21
753618-B21
789934-B21
412140-B21
Page 20
QuickSpecs
HPE BladeSystem c7000 Enclosure
Related Options
HPE BladeSystem NOTE: For detailed interconnect options, consult the specific interconnect QuickSpecs:
c-Class Network https://www.hpe.com/h20195/v2/getpdf.aspx/c04284204.pdf?ver=10
Interconnects
NOTE: Interconnect bays 1 and 2 support the network (i.e. Ethernet capable)
interconnects. These bays connect to the included network adapter ports in the server
blades (either embedded ports on G7 and earlier server blades or FlexibleLOM adapter(s)
on Gen8 and later server blades) via the NonStop passive midplane. An enclosure must
be configured with at least a network interconnect in interconnect bay 1.
NOTE: Interconnect bays 3 through 8 support all interconnects. These bays connect to
the mezzanine slots in the server blades via the NonStop passive midplane. Interconnect
bays 3 and 4 must contain the same type of interconnect (network, SAN, SAS, etc) as
they connect to the same mezzanine slot. Likewise for interconnect bays 5, 6, 7, and 8.
NOTE: The HPE BladeSystem c-Class interconnects ship as single units unless otherwise
noted. Interconnects must be ordered in quantities of two for redundancy support.
NOTE: Options to specific c-Class interconnects are not included in the list below. Consult
the individual interconnect QuickSpecs to obtain part numbers for interconnect options
such as cables, SFPs, etc.
HP Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem
NOTE: Virtual Connect FlexFabric-20/40 F8 modules are supported on c7000 enclosures
with the following SKUs: 5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21.
NOTE: A c7000 enclosure with a 10 fan configuration is required when one or more HPE
Virtual Connect FlexFabric-20/40 F8 Module(s) are installed.
HP Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem with TAA
NOTE: Virtual Connect FlexFabric-20/40 F8 modules are supported on c7000 enclosures
with the following SKUs: 5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21.
NOTE: A c7000 enclosure with a 10 fan configuration is required when one or more HPE
Virtual Connect FlexFabric-20/40 F8 Module(s) are installed.
HPE Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 Option
NOTE: 662048-B21 includes 2 x HPE Virtual Connect Flex-10/10D modules plus 1 x
VCEM enclosure license. Customer will receive a printed license entitlement certificate
and 2 Virtual Connect modules as a single deliverable. The license entitlement certificate
must be redeemed online or via fax to obtain the VCEM license activation key.
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
HPE Virtual Connect FlexFabric 10/24 Enterprise Edition BLc7000 Option
NOTE: 605865-B21 includes 2 x HPE Virtual Connect FlexFabric 10Gb/24-port modules
plus 1 x VCEM BL-c7000 enclosure license. Customer will receive a printed license
entitlement certificate and 2 Virtual Connect modules as a single deliverable. The license
entitlement certificate must be redeemed online or via fax to obtain the VCEM license
activation key.
HPE Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
HPE 6125G Ethernet Blade Switch
HPE 6125G/XG Ethernet Blade Switch
HPE 1GB Ethernet Pass-Thru Module for c-Class BladeSystem
HPE 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem
HP Cisco B22HP Fabric Extender for BladeSystem c-Class
HP Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class
691367-B21
691367-B22
662048-B21
638526-B21
605865-B21
571956-B21
658247-B21
658250-B21
406740-B21
538113-B21
641146-B21
657787-B21
HPE BladeSystem NOTE: For detailed interconnect options, consult the specific interconnect QuickSpecs:
c-Class SAN
https://www.hpe.com/h20195/v2/getpdf.aspx/c04284204.pdf?ver=10
Interconnects
NOTE: Interconnect bays 1 and 2 support the network (i.e. Ethernet capable) interconnects. These bays
connect to the included network adapter ports in the server blades (either embedded ports on G7 and
earlier server blades or FlexibleLOM adapter(s) on Gen8 and later server blades) via the NonStop passive
Page 21
QuickSpecs
HPE BladeSystem c7000 Enclosure
Related Options
midplane. An enclosure must be configured with at least a network interconnect (listed above) in
interconnect bay 1.
NOTE: Interconnect bays 3 through 8 support all interconnects. These bays connect to the mezzanine slots
in the server blades via the NonStop passive midplane. Interconnect bays 3 and 4 must contain the same
type of interconnect (network, SAN, SAS, etc) as they connect to the same mezzanine slot. Likewise for
interconnect bays 5, 6, 7, and 8.
NOTE: The HPE BladeSystem c-Class interconnects ship as single units unless otherwise noted.
Interconnects must be ordered in quantities of two for redundancy support.
NOTE: Options to specific c-Class interconnects are not included in the list below. Consult the individual
interconnect QuickSpecs to obtain part numbers for interconnect options such as cables, SFPs, etc.
NOTE: HPE Fibre Channel interconnect switches and modules supporting up to a 4Gbps internal port
downlink speed (connection speed from the server blades to the interconnect) (SKU 403626-B21) are
supported on all c7000 enclosures.
NOTE: HPE Fibre Channel interconnect switches and modules supporting up to an 8Gbps internal port
downlink speed (connection speed from the server blades to the interconnect) (SKUs 466482-B21,
572018-B21, AJ820C, AJ821C, AJ822C, AW563A, and AW564A) are supported on all c7000 enclosures.
NOTE: HPE Fibre Channel interconnect switches and modules supporting up to a 16Gbps internal port
downlink speed (connection speed from the server blades to the interconnect) (SKUs C8S45A, C8S46A,
C8S47A, 751465-B21, and 778720-B21) are supported on c7000 enclosures with the following SKUs:
5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21. A c7000 Platinum enclosure (SKUs 6XXXXX-B21 and
7XXXXX-B21) is required to permit the 16Gbps speed on the internal downlink ports. A c7000 enclosure
with SKU 5XXXXX-B21 will operate the internal ports up to 8Gbps.
HPE Virtual Connect 16Gb 24-port Fibre Channel Module for c-Class BladeSystem
751465-B21
HPE Virtual Connect 16Gb 24-port Fibre Channel TAA Module for c-Class BladeSystem
778720-B21
HPE Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem
466482-B21
HPE Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem
572018-B21
HPE 4GB Fibre Channel Pass-thru Module for c-Class BladeSystem
403626-B21
Brocade 8/12c SAN Switch for BladeSystem c-Class
AJ820C
Brocade 8/24c SAN Switch for BladeSystem c-Class
AJ821C
Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class
AJ822C
Cisco MDS 9124e Switch for BladeSystem c-Class 12-port Upgrade LTU
T5169A
Brocade 16Gb/28 SAN Switch for BladeSystem c-Class
C8S46A
Brocade 16Gb/16 SAN Switch for BladeSystem c-Class
C8S45A
Brocade 16Gb/28 SAN Switch Power Pack+ for BladeSystem c-Class
C8S47A
Brocade 8/16Gb Embedded FC Switch 12-port Upgrade LTU
T5517A
HPE MDS 8/12c Fabric Switch 12-port Upgrade LTU
TA804A
NOTE: Licensed per switch.
HP StoreFabric Data Center Network Manager BladeSystem LTU
TC367A
NOTE: Installed on DCNM Server, each license can be assigned to only one switch.
HPE SAS Switch
NOTE: For detailed interconnect options, consult the specific interconnect QuickSpecs:
https://www.hpe.com/h20195/v2/getpdf.aspx/c04284204.pdf?ver=10
NOTE: Options to specific c-Class interconnects are NOT included in the list below.
Consult the individual interconnect QuickSpecs to obtain part numbers for interconnect
options such as cables, SFPs, etc.
NOTE: Interconnect Bay 1 must contain one of the Ethernet capable interconnect
modules.
NOTE: The HPE BladeSystem c-Class interconnects ship as single units unless otherwise
noted. Interconnects must be ordered in quantities of two for redundancy support.
NOTE: The HPE 6Gb SAS switches are supported on c7000 enclosures with the following
SKUs: 5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21.
Page 22
QuickSpecs
HPE BladeSystem c7000 Enclosure
Related Options
HPE 6Gb SAS Switch Single Pack for HPE BladeSystem c-Class
HPE 6Gb SAS Switch Dual Pack for HPE BladeSystem c-Class
BK763A
BK764A
HPE BladeSystem NOTE: For detailed interconnect options, consult the specific interconnect QuickSpecs:
InfiniBand
https://www.hpe.com/h20195/v2/getpdf.aspx/c04284204.pdf?ver=10.
Interconnects
NOTE: Options to specific c-Class interconnects are NOT included in the list below. Consult the individual
interconnect QuickSpecs to obtain part numbers for interconnect options such as cables, SFPs, etc.
NOTE: Interconnect Bay 1 must contain one of the Ethernet capable interconnect modules.
NOTE: The HPE BladeSystem c-Class interconnects ship as single units unless otherwise noted.
Interconnects must be ordered in quantities of two for redundancy support.
NOTE: The HPE QDR InfiniBand Switches are supported on c7000 enclosures with the following SKUs:
5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21.
NOTE: The HPE FDR InfiniBand Switches are supported on c7000 enclosures with the following SKUs:
686610-B21, 686611-B21, and 7XXXXX-B21.
HPE 4X FDR InfiniBand Managed Switch Module for c-Class BladeSystem
648311-B21
HPE 4X FDR InfiniBand Switch Module for c-Class BladeSystem
648312-B21
HPE OneView
Software
HPE Insight
Software
HPE OneView Physical Media Kit LTU
HPE OneView Advanced licenses for bundling with BladeSystem enclosures
HPE OneView Advanced with iLO Advanced
(c7000 enclosure required on same purchase order)
NOTE: The following HPE OneView part numbers can only be used when ordered on the
same order as a BladeSystem c7000 enclosure.
HPE OneView including 3yr 24x7 Support Enclosure Bundle Track 16-server LTU
NOTE: Server provisioning (via 'HPE Insight Control server provisioning') is licensed
as part of HPE OneView Advanced and provides multi-server OS and driver
provisioning. Media kit #BD883A can be ordered for a physical copy of this software
(USB flash drive).
E5Y37A
E5Y42A
Insight Control
NOTE: Insight Control is not supported with Gen10 server blades.
NOTE: Licenses ship without media. The Insight Management Media Kit can be ordered separately, or can
be downloaded at: http://www.hpe.com/info/insightmanagement..
NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in
order to obtain the license activation key(s). Includes one year of 24 x 7 HPE Software Technical Support
Service.
NOTE: For additional license kits, please see the QuickSpecs at:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123391.
NOTE: HPE Insight Control 7.2 introduced Insight Control server provisioning, a new
capability ideal for multi-server OS and firmware provisioning to ProLiant and
BladeSystem servers. Insight Control server provisioning is included and licensed as part
of HPE Insight Control. A media kit, "HPE Insight Control server provisioning USB media
kit" (# BD883A), including a USB, is available for customers who require a physical copy
of the media loaded with Insight Control server provisioning software. Please note that
this media kit is separate and in addition to the HPE Insight Management DVD Media Kit
(C6N31A).
HPE Insight Management Media Kit
C6N31A
NOTE: The HPE Insight Management Media Kit (C6N31A) contains DVDs without
licenses. Contains HPE Systems Insight Manager, HPE Insight Control, HPE Matrix
Operating Environment, and Virtual Connect Enterprise Manager software. Uses an
Page 23
QuickSpecs
HPE BladeSystem c7000 Enclosure
Related Options
integrated installer to perform quick and accurate software installation and updates.
HPE iLO Advanced HPE iLO Advanced for BladeSystem including 1yr 24x7 Support 8-server LTU
for BladeSystem
License
512489-B21
HPE Virtual
Connect
Enterprise
Manager
HPE Virtual Connect Enterprise Manager including 1yr 24x7 Support Single c7000
459864-B21
Enclosure LTU
HPE BladeSystem c-Class 4x10G QSFP+ MPO SR4 100m Transceiver
805755-B21
NOTE: This license (459864-B21) allows One BL-c7000 enclosure to be managed with VCEM. Customer
will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online or via fax to obtain the license activation key(s). Includes one year of 24 x 7 HPE
Software Technical Support and Update Service.
NOTE: For additional license kits, please visit:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154443 (Worldwide)
HPE c-Class
Storage Blades
HPE D2220sb Build-to-order Storage Blade
QW917A
NOTE: Includes 3yr NBD Parts-Only Warranty Service
HPE D2220sb Configure-to-order Storage Blade
QW918A
NOTE: Includes 3yr NBD Parts-Only Warranty Service
NOTE: The D2220sb requires a c7000 Enclosure configuration with 10 fans.
NOTE: Please see the HPE D2220sb Storage Blade QuickSpecs for technical specifications and additional
information at: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111399.
HPE Expansion
Blades
HPE BLc PCI Expansion Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123380
448018-B21
HPE Tape Backup NOTE: For the complete range of tape drives, autoloaders, libraries and media see:
http://www.hpe.com/storage/storeever For hardware and software compatibility of HPE tape backup
products see: http://www.hpe.com/storage/spock.
HPE StoreEver LTO-6 Ultrium 6250 Tape Drive in a 1U Rack Mount Kit
C0L99A
HPE StoreEver LTO-6 Ultrium 6250 Internal Tape Drive
EH969A
HPE StoreEver LTO-6 Ultrium 6250 External Tape Drive
EH970A
HPE Rack Options NOTE: For additional information regarding Rack Options, please see the following URL:
http://www.hpe.com/info/rackandpower.
HPE TFT7600 G2 KVM Console and Monitor
NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hpe.com/servers/kvm
HPE Server Console Switch G2 with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
AF618A
AF619A
Page 24
QuickSpecs
HPE BladeSystem c7000 Enclosure
Related Options
HPE Packaged
Support (Care
Pack) Services
HPE IP Console Switch G2 with Virtual Media & CAC
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
AF620A
AF621A
AF622A
HPE KVM Interface Adapters
HP KVM Console USB Interface Adapter
HP KVM Console USB 2.0 Virtual Media CAC Interface Adapter
HP KVM Console Serial/Power G2 Interface Adapter
AF628A
AF629A
AF625A
NOTE: Some options, including Fibre Channel and InfiniBand switches for the HPE c-Class BladeSystem, are
not covered under the c7000 enclosure Care Packs and carry separate Care Packs. Care Pack service level
support for these options should always be uplifted to match existing storage or server service level. Please
view the option QuickSpecs or contact your Hewlett Packard Enterprise sales representative or Hewlett
Packard Enterprise Authorized ServiceOne partner for Care Pack information.
NOTE: Additional HPE Packaged Support (formerly Care Pack) services can be found at:
https://www.hpe.com/us/en/services/it-support.html.
Proactive Care Services
HPE 3 year Proactive Care 24x7 c7000 Enclosure Service
HPE 3 year Proactive Care Call to Repair c7000 Enclosure Service
HPE 3 year Proactive Care 24x7 c7000 Enclosure with Insight Control Service
HPE 3 year Proactive Care Call to Repair c7000 Enclosure with Insight Control Service
NOTE: Insight Control is not supported with Gen10 server blades.
Installation & Start-up Services
HPE BladeSystem c7000 Infrastructure Startup Service
HPE BladSys c7000 Encd Network Startup Service
HPE Hardware Install c-Class Enclosure and Server Blade Service
HPE Installation during Non Standard Hours c7000 Enclosure + Blade Service
U3C33E
U3C36E
U3P10E
U3P13E
UE602E
UE603E
UE494E
UG870E
HPE Flexible Care Pack Services for your Integrity BladeSystem Enclosure
NOTE: Please contact your Hewlett Packard Enterprise sales representative or Hewlett Packard Enterprise
Authorized ServiceONE partner for additional Flexible Care Pack information.
Mission Critical Services
Integrity Blade svr enclosure HW Support
Integrity Blade svr enclosure HW Support
HA111A3#6Q6
HA112A3#6Q6
Installation & Start-up Services
HPE Support - bl860c Enclosure Inst SVC
HP Startup BladSys c-Class Encd Ntwk SVC
HA114A1#57A
HA124A1#56H
Page 25
QuickSpecs
HPE BladeSystem c7000 Enclosure
Power Input Module and Power Supply Specifications
NOTE: HPE highly recommends using the HPE Power Advisor tool to ensure the number of power supply options you have
selected can fully support your BladeSystem configuration and to review maximum system power ratings for facilities planning
purposes. HPE Power Advisor is available at: http://www.hpe.com/info/hppoweradvisor
Power Input Module
Power
Connection
HPE BLc7000 Single
Phase FIO Intelligent
Power Module
(677595-B21)
HPE BLc7000 1 PH
FIO Power Module
Option
(413379-B21)
Three Phase AC
NA/JPN
(413380-B21)9
6x IEC-320 C20
blue power
connectors2,3,4
1
Power Input Module Specifications
HPE Power Rated Input
Input
Discovery
Voltage
Frequency
Services
Supported Power
Supply Kits7
Supported3
200-240 VAC
6x IEC-320 C20
power
connectors5
50-60 Hz
Two 3.05m (10 ft)
power cables with
NEMA L15-30p
connectors
200-208 VAC
line to line,
3-phase delta
2650W Platinum9,10a
2400W Platinum8,9,10b
2400W Gold8,9,10c
2250W9,10d
Not
supported
HPE BLc7000 -48V DC 45DG 4AWG 1/4
2H terminal lugs
Power Input Module
(AH331A)
40-60 VDC
N/A
2250W -48VDC
(AH332A)
HPE HVDC 1PH AC
6x APP Saf-D-Grid
Power Module BLc FIO
receptacle
Option
connectors12
(753623-B21)
277 VAC,
380 VDC
50-60 Hz
(AC),
N/A (DC)
2650W Universal
(753618-B21 and
753619-B21)
1.
Supported
c7000
Enclosures11
4XXXXX-B21
4XXXXX-B22
4XXXXX-B23
5XXXXX-B21
6XXXXX-B21
7XXXXX-B21
See the “Technical Specifications” section for additional power specifications.The blue power connectors indicate HPE Power
Discovery Services capability.HPE Power Discovery Services are enabled when used with an Intelligent Power Distribution Unit
(iPDU), iPDU cables, and the Platinum power supply kits 733460-B21, 733459-B21, 517521-B21, or 588603-B21. See the
iPDU, iPDU cable, and c-Class Power Supply sections for these options.Accept IEC C19-C20 and C19-C20 Intelligent Power
Distribution Unit (iPDU) power cables. One WW 250W C19-C20 2.0m (non-iPDU) power cable is included per supported
power supply. iPDU power cables are ordered separately.Accept IEC C19-C20 power cables. One WW 250W C19-C20 2.0m
power cable is included per supported power supply. Rated 220 to 240 VAC line-to-neutral. The enclosure will not operate
from higher line-to-line voltage with the WYE wall plug configuration. This power input module is configured to provide 220 to
240 VAC to the power supplies.Each enclosure must include only one type of power supply. Mixing of power supplies is not
supported, except during hot swaps to different level or higher efficient power supplies. The Onboard Administrator will exhibit
a mismatch error due to mixed power supplies until all power supplies are matched.The three-phase power input module
(413380-B21) requires a minimum of 6 fans and 3 power supplies. For full redundancy, 6 power supplies are
required.Supported HPE power supply kits include:2650W Platinum: 733460-B21 (6-pack)and 733459-B21 (single).2400W
Platinum: 517521-B22 (6-pack) and 588603-B21 (single).2400W Gold: 517521-B21 (6-pack) and 499243-B21
(single).2250W: 412138-B21 (single).The Onboard Administrator firmware must be at least the minimum version that
supports all components installed within the enclosure.Power cables with APP Saf-D-Grid connectors are ordered separately.
Power Supply Specifications
Page 26
QuickSpecs
HPE BladeSystem c7000 Enclosure
Power Input Module and Power Supply Specifications
HPE 2650 Watt Platinum Hot Plug Power Supply
Part Number
733459-B21 (single), 733460-B21 (6-pack)
Input Voltage Range (Vrms)
200-240
Frequency Range (Nominal) (Hz)
50 / 60
Nominal Input Voltage (Vrms)
200
208
220
Maximum Rated Output Wattage (Watts)
2650
Nominal Input Current (Arms)
14.5
13.9
13.1
Maximum Rated Input Wattage (Watts)
2898
2901
2904
Maximum Rated VA (Volt-Amp)
2896
2888
2887
Efficiency (%) at Maximum Rated Output Wattage
91.2
91.3
91.4
Power Factor (Minimum)
0.98
Leakage Current (mA)
0.97
1.01
1.06
Maximum Inrush Current (A peak)
100
Maximum Inrush Current duration (mS)
10
Maximum British Thermal Unit Rating (BTU/Hr)
9888
9899
9910
HPE 2400 Watt Platinum Hot Plug Power Supply
Part Number
588603-B21 (single), 517521-B22 (6-pack)
Input Voltage Range (Vrms)
200-240
Frequency Range (Nominal) (Hz)
50 / 60
Nominal Input Voltage (Vrms)
200
208
220
Maximum Rated Output Wattage (Watts)
2450
Nominal Input Current (Arms)
13.9
13.4
12.6
Maximum Rated Input Wattage (Watts)
2692
2692
2678
Maximum Rated VA (Volt-Amp)
2778
2778
2762
Efficiency (%) at Maximum Rated Output Wattage
91
91
91.5
Power Factor (Minimum)
0.98
Leakage Current (mA)
0.97
1.01
1.06
Maximum Inrush Current (A peak)
100
Maximum Inrush Current duration (mS)
10
Maximum British Thermal Unit Rating (BTU/Hr)
9186
9186
9136
HPE 2400 Watt Gold Hot Plug Power Supply
Part Number
Input Voltage Range (Vrms)
Frequency Range (Nominal) (Hz)
Nominal Input Voltage (Vrms)
Maximum Rated Output Wattage (Watts)
Nominal Input Current (Arms)
Maximum Rated Input Wattage (Watts)
Maximum Rated VA (Volt-Amp)
Efficiency (%) at Maximum Rated Output Wattage
Power Factor (Minimum)
Leakage Current (mA)
Maximum Inrush Current (A peak)
499243-B21 (single), 517521-B21 (6-pack)
200-240
50 / 60
200
208
220
2450
14.15
13.58
12.81
2742
2737
2730
2830
2825
2817
87.5
87.7
87.9
0.98
0.97
1.01
1.06
100
230
240
12.5
2887
2882
91.8
12.0
2884
2878
91.9
1.11
1.16
9850
9840
230
240
12.0
2678
2762
91.5
11.4
2663
2747
92
1.11
1.16
9136
9086
230
240
12.23
2724
2812
88.1
11.70
2720
2807
88.2
1.11
1.16
Page 27
QuickSpecs
HPE BladeSystem c7000 Enclosure
Power Input Module and Power Supply Specifications
Maximum Inrush Current duration (mS)
Maximum British Thermal Unit Rating (BTU/Hr)
HPE 2250 Watt -48VDC Hot Plug Power Supply
Part Number
Input Voltage Range (V DC)
Frequency Range (Nominal) (Hz)
Nominal Input Voltage (Vrms)
Maximum Rated Output Wattage (Watts)
Nominal Input Current (Arms)
Maximum Rated Input Wattage (Watts)
Maximum Rated VA (Volt-Amp)
Efficiency (%) at Maximum Rated Output Wattage
Power Factor (Minimum)
Leakage Current (mA)
Maximum Inrush Current (A peak)
Maximum Inrush Current duration (mS)
Maximum British Thermal Unit Rating (BTU/Hr)
9356
9338
5
9313
9295
9280
AH332A (single)
40-60
N/A
48
2250
53.15
2523
2523
89.2
1.00
N/A
200
5
8607
HPE 2650 Watt Universal Hot Plug Power Supply
Part Number
753618-B21 (single), 753619-B21 (6-pack)
Input Voltage Range (Vrms)
277 VAC, 380 VDC
Frequency Range (Nominal) (Hz)
50 / 60 (AC), N/A (DC)
Nominal Input Voltage (Vrms)
277 VAC
Maximum Rated Output Wattage (Watts)
2650
Nominal Input Current (A rms)
10.40
Maximum Rated Input Wattage (Watts)
2868
Maximum Rated VA (Volt-Amp)
2881
Efficiency (%) at Maximum Rated Output Wattage
92.4
Power Factor (Minimum)
0.996 (AC), 1.000 (DC)
Leakage Current (mA)
1.16
Maximum Inrush Current (A peak)
100
Maximum Inrush Current duration (mS)
10
Maximum British Thermal Unit Rating (BTU/Hr)
9785
HPE 2650 Watt -48VDC Hot Plug Power Supply
Part Number
789934-B21 (Single), 753619 (6-pack)
Input Voltage Range ( V dc )
-40 to -72
Frequency Range (Nominal) ( Hz )
N/A
Nominal Input Voltage ( V dc )
-40
-48
Maximum Rated Output Wattage Rating
2650
2650
Nominal Input Current ( A )
-72.74
-60.18
Maximum Rated Input Wattage Rating ( Watts )
2909
2889
Maximum Rated Input VA Rating (Volt-Amp)
2909
2889
Efficiency ( % )
91.1
91.7
Power Factor (Minimum)
1.000
1.000
380 VDC
7.51
2853
2853
92.9
N/A
9735
-72
2650
-39.96
2877
2877
92.1
1.000
Page 28
QuickSpecs
HPE BladeSystem c7000 Enclosure
Power Input Module and Power Supply Specifications
Leakage Current ( mA )
Maximum Inrush Current (A peak )
Maximum Inrush Current duration ( mS )
Maximum British Thermal Unit Rating ( BTU-Hr )
Hold Up Time (ms)
9927
0.5
N/A
200
5
9857
0.5
9817
0.5
Page 29
QuickSpecs
HPE BladeSystem c7000 Enclosure
Fan Bay and Device Bay Numbering and Population Guidelines
Fan bay numbering
Fans must be placed in the following bays
Number of Fans
4
6
8
10
Fan Bays Used
4, 5, 9, 10
3, 4, 5, 8, 9, 10
1, 2, 4, 5, 6, 7, 9, 10
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Half-height device bay numbering
1. Device Bay 1
2. Device Bay 2
3. Device Bay 3
4. Device Bay 4
9. Device Bay 9
10. Device Bay 10
11. Device Bay 11
12. Device Bay 12
Page 30
QuickSpecs
HPE BladeSystem c7000 Enclosure
Fan Bay and Device Bay Numbering and Population Guidelines
5. Device Bay 5
6. Device Bay 6
7. Device Bay 7
8. Device Bay 8
13. Device Bay 13
14. Device Bay 14
15. Device Bay 15
16. Device Bay 16
Full-height device bay numbering
1. Device Bay 1
2. Device Bay 2
3. Device Bay 3
4. Device Bay 4
5. Device Bay 5
6. Device Bay 6
7. Device Bay 7
8. Device Bay 8
Full-height and half-height blade mixed configurations
The c7000 enclosure is divided into 4 zones by the vertical support metalwork. Within each zone a removable divider is used to
support half height devices. To install a full-height blade in any zone this divider must be removed. As a consequence a zone can
only contain either full-height server blades or half-height server blades.
NOTE: Expansion blades can be installed in the same zone as both full-height, single-wide and half-height blades. For more
information, please see the "Expansion blades" later in this document.
Page 31
QuickSpecs
HPE BladeSystem c7000 Enclosure
Fan Bay and Device Bay Numbering and Population Guidelines
The following device bays are located in each zone:
Zone
1
2
3
4
Half-Height Device Bays
1, 9, 2, 10
3, 11, 4, 12
5, 13, 6, 14
7, 15, 8, 16
Full-Height Device Bays
1, 2
3, 4
5, 6
7, 8
Expansion blades
Expansion blades consist of storage blades, tape blades, and the PCI Expansion Blade. Up to 8 expansion blades are supported per
HPE BladeSystem c-Class c7000 Enclosure. Expansion blades may be installed in the same zone as half-height and full-height,
single-wide server blades. Expansion blades are not supported with full-height, double-wide server blades. An expansion blade is
installed directly adjacent to a server blade, also known as a partner server blade. Expansion blade population rule best practices are
detailed below. For additional expansion blade rules and guidelines, please see the documentation that ships with the enclosure and
expansion blade. Hewlett Packard Enterprise recommends consulting your Hewlett Packard Enterprise sales representative to
confirm the validity of any configuration.
Figure 1
Installing an expansion blade adjacent to a halfheight server blade.
Figure 2
Installing a single expansion blade adjacent to a fullheight, single-wide server blade.
Expansion blade population best practices for half-height server blades
1. One half-height partner server blade supports one expansion blade (Figure 1).
2. Identify the partner server blade to be installed with the expansion blade. The two blades always occupy a pair of slots as
follows: 1 & 2, 3 & 4, 5 & 6, 7 & 8, 9 & 10, 11 & 12, 13 & 14, 15 & 16.
3. If the partner server blade is installed in an odd-numbered bay, the expansion blade is installed in the adjacent evennumbered bay to the right.
4. If the partner server blade is installed in an even-numbered bay, the expansion blade is installed in the adjacent oddnumbered bay to the left.
5. Each c7000 zone contains a removable divider that is used to support half-height devices. This divider is remains installed
whether the half-height devices are server or expansion blades.
Expansion blade population best practices for full-height, single-wide server blades:
Page 32
QuickSpecs
HPE BladeSystem c7000 Enclosure
Fan Bay and Device Bay Numbering and Population Guidelines
1. One full-height, single-wide partner server blade supports one or two expansion blades. Figure 2 shows installation of one
expansion blade.
2. Identify the partner server blade to be installed with the first expansion blade. The two blades always occupy a pair of slots,
as follows: 9 & 10, 11 & 12, 13 & 14, 15 & 16.
3. The partner server blade is installed in an odd-numbered bay. The first expansion blade is installed on the lower row of the
enclosure in an even-numbered bay (slots 10, 12, 14 or 16) adjacent to the partner server blade.
4. If only a single expansion blade is installed:
a. A half-height server blade may be installed in the empty bay directly above the expansion blade; this server blade
cannot be partnered with the expansion blade. A coupler bracket is installed on the expansion blade. A coupler
bracket is not installed on the server blade. A coupler bracket is included with each expansion blade.
b. If no device is desired in the empty bay above the expansion blade, a device bay blank is installed.
c. The upper half-height server blade or device bay blank must be removed before removing the lower expansion
blade.
5. If a second expansion blade is installed:
a. It is always located directly above the first installed expansion blade. A coupler bracket is installed on the lower
expansion blade. A coupler bracket is not installed on the upper expansion blade. A coupler bracket is included
with each expansion blade.
b. Two storage blades, two tape blades, two PCI Expansion Blades, or a mixture of any two. For a mixed configuration
that contains a storage blade, the storage blade is installed on the bottom bay and the tape blade or PCI
Expansion Blade is installed on the top bay.
c. The upper expansion blade must be removed before removing the lower expansion blade.
6. When partnering an expansion blade with a ProLiant BL620c G7 Server Blade, an HPE PCI Express Mezzanine Pass-Thru
Card for BladeSystem c-Class (431643-B21) is required. This card is installed in the mezzanine 3 connector in the server
blade for a lower bay expansion blade installation and a second card in installed in mezzanine 2 connector if a second
expansion blade is required.
7. The HPE ProLiant BL680c G7 Server Blade is a full-height, double-wide device. It does not support expansion blades.
Device bay and fan population guidelines
The device bay and fan bay population rule best practices are provided below. Hewlett Packard Enterprise recommends consulting
your Hewlett Packard Enterprise sales representative to confirm the validity of any configuration.
Summary:
Supported Device Bays
Configuration
Half-Height Bays
Full-Height Bays
No more than 1 full-height or 2 half1, 9, 2, 10
1, 2
height device bays occupied
No more than 4 full-height or 8 half1, 9, 2, 10, 3, 11, 4, 12
1, 2, 3, 4
height device bays occupied
At least 5 full-height or 9 half-height
device bays occupied
All
All
Minimum Number
of Fans
Supported
Fan Bays
4
4, 5, 9, 10
6
3, 4, 5, 8, 9, 10
8
1, 2, 4, 5, 6, 7, 9, 10
NOTE: Ten fans are strongly recommended in all configurations for maximum cooling efficiency and redundancy, reduced power
consumption, and reduced noise.
NOTE: Please see the complete detailed list below of device bay and fan bay population rule best practices.
Details:
1. Half-height devices are populated from top and bottom from left to right from the front of the enclosure. So the first two
half-height devices would be placed in bays 1 & 9, the second two half-height devices would be placed in bays 2 & 10, and
so on until the enclosure is full. Please refer to the above section “half-height device bay numbering” for additional
information.
2. Full-height servers are populated from left to right. Please see the above section “full-height device bay numbering” for
additional information.
3. An enclosure zone can only contain either full-height server blades or half-height server blades; mixing of the two form
factors is not allowed except when connecting an expansion blade to a server partner blade. Please refer to the above
Page 33
QuickSpecs
HPE BladeSystem c7000 Enclosure
Fan Bay and Device Bay Numbering and Population Guidelines
sections “Full-height and half-height blade mixed configurations” and “Expansion blades” for more information.
4. The type and number of installed blade devices and interconnect modules determine the number of required fans.
5. The enclosure supports a minimum of 4 Active Cool 200 Fans to a maximum of 10 Active Cool 200 Fans. Ten fans are
strongly recommended for maximum cooling efficiency and redundancy, reduced power consumption, and reduced noise.
6. For proper operation, fans and blades must be installed in the correct bays. The Onboard Administrator will ensure that fans
and blades are correctly placed before allowing systems to power on.
7. A minimum of 4 fans are required for a configuration that occupies 2 half-height device bays. Examples include up to 2
half-height, single-wide server blades, 1 half-height, double-wide server blade, 1 full-height, single-wide server blade, or 1
half-height, single-wide server blade and 1 expansion blade. The blades are installed in zone 1 (device bays 1, 9, 2, and/or
10). The fans are installed in fan bays 4, 5, 9, and 10.
8. A minimum of 6 fans are required for a configuration that occupies up to 8 half-height device bays. Examples include up to
8 half-height, single-wide server blades, 4 half-height, double-wide server blades, or 2 full-height, double-wide server
blades. The blades are installed in zones 1 and 2 (device bays 1, 9, 2, 10, 3, 11, 4, and/or 12). The fans are installed in fan
bays 3, 4, 5, 8, 9, and 10.
9. A minimum of 8 fans are required for a configuration that occupies at least 9 half-height device bays. The blades can be
installed in any device bays. The fans are installed in fan bays 1, 2, 4, 5, 6, 7, 9, and 10.
10. Ten fans support all device bays. The blades can be installed in any device bays. The fans are installed in all fan bays.
11. Device bay blanks and fan bay blanks are installed in all unoccupied bays.
12. In addition to the above, please observe the following:
a. A minimum of 6 fans are required for any enclosure configured with a three-phase power input module. The fans are
installed in fan bays 3, 4, 5, 8, 9, and 10.
b. A minimum of 8 fans are required if at least one switch module is installed in interconnect bay 1, 3, 5, or 7 and at least
one switch module is installed in interconnect bay 2, 4, 6, or 8. This does not apply to pass-thru modules. The fans are
installed in fan bays 1, 2, 4, 5, 6, 7, 9, and 10.
c. Ten fans are required for a configuration with:
i. One or more HPE Virtual Connect FlexFabric-20/40 F8 Modules.
ii. One or more D2220sb Storage Blades.
iii. More than half of the enclosure device bays are occupied and any quantity of D2200sb Storage Blades are
present.
iv. Nine or more BL460c G1 and/or BL460c G5 Server Blades.
Page 34
QuickSpecs
HPE BladeSystem c7000 Enclosure
Technical Specifications
HPE BladeSystem Dimensions
c7000 Server
Blade Enclosure
Height
Width
Depth
17.4 in (442 mm)
17.6 in (447.04 mm)
32 in (813 mm)
Shipping Dimensions Height
Width
Depth
29.88 in (759 mm)
23.88 in (607 mm)
39.88 in (1013 mm)
Enclosure Weight
Unboxed
148 lb (67 kg)
Shipping
191 lb (87 kg)
NOTE: The enclosure weight above includes only an empty enclosure- servers, the power input module,
power supplies, fans, interconnect modules, and Onboard Administrator(s) are not included. The weight for
the power input module, power supplies, fans, and Onboard Administrator(s) is listed below. Please see the
specific server blade and interconnect module QuickSpecs for their respective weight.
Power Input Module
Weight
(minimum 1, maximum
1)
Power Supply Weight
(minimum 1, maximum
6)
HPE Active Cool 200
Fan Weight
(minimum 4, maximum
10)
Onboard
Administrator Weight
(minimum 1, maximum
2)
3 lbs (1.4 kg)
6 lbs (2.7 kg)
4 lbs (1.8 kg)
3 lbs (1.4 kg)
482 lb (219 kg)
Maximum Enclosure Unboxed
Weight (approximate) Shipping
525 lb (238 kg)
NOTE: The approximate maximum enclosure weight above includes 16 server blades fully configured, the
power input module, six power supplies, ten fans, eight interconnect modules, and two Onboard
Administrators.
Temperature Range
Operating
Non-Operating
Relative Humidity
Operating
50° to 95° F (10° to 35° C)
-22° to 140° F (-30° to 60° C)
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-condensing.
Non-Operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F)maximum wet bulb temperature, noncondensing.
NOTE: Operating temperature has an altitude derating of 1.8° F (1° C) per 1,000 ft (304.8 m). No direct
sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is
30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum
temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.
Page 35
QuickSpecs
HPE BladeSystem c7000 Enclosure
Technical Specifications
NOTE: For detailed environmental and other installation requirements, please see the “HPE BladeSystem cClass Site Planning Guide” at http://www.hpe.com/support/hpesc.
Power
NOTE: HPE highly recommends using the HPE Power Advisor tool to ensure the number of power supply
options you have selected can fully support your BladeSystem configuration and to review maximum system
power ratings for facilities planning purposes. HPE Power Advisor is available at:
http://www.hpe.com/info/hppoweradvisor.
Single Phase AC
Power Input Module
(413379-B21)
Single Phase AC
Intelligent Power
Input Module
(677595-B21)
Power connection
677595-B21: 6x IEC-320 C20 blue power connectors
413379-B21: 6x IEC-320 C20 power connectors
NOTE: The blue power connectors indicate HPE
Power Discovery Services capability. HPE Power
Discovery Services are enabled when used with an
Intelligent Power Distribution Unit (iPDU), iPDU
cables, and a Platinum power supply kit.
NOTE: One WW 250W C19-C20 2.0m power cable is
included per power supply. iPDU power cables are
ordered separately.
Rated input voltage
200 to 220 VAC
Rated input frequency
50 to 60 Hz
Number of power supplies
supported
Minimum: One (1)
Maximum: Six (6)
2250W Power Supply
(412138-B21)
Maximum output (per
power supply)
Maximum output (total for
six power supplies)
Maximum input current
(per power supply)
Maximum input power
(per power supply)
2400W Gold Power Supply
(517521-B21, 6-pack)
(499243-B21, single)
Maximum output (per
power supply)
Maximum output (total for
six power supplies)
Maximum input current
(per power supply)
Maximum input power
(per power supply)
2400W Platinum Power
Supply
(517521-B22, 6-pack)
(588603-B21, single)
2250W
13,050W
13.1 A at 200 VAC
12.6 A at 208 VAC
11.9 A at 220 VAC
2621 VA
2450W
14,210W
13.9 A at 200 VAC
13.3 A at 208 VAC
12.6 A at 220 VAC
2780 VA
Maximum output (per
2450W
power supply)
Maximum output (total for 14,210W
six power supplies)
Maximum input current
13.2 A at 200 VAC
Page 36
QuickSpecs
HPE BladeSystem c7000 Enclosure
Technical Specifications
(per power supply)
Maximum input power
(per power supply)
2650W Platinum Power
Supply
(733460-B21, 6-pack)
(733459-B21, single)
Maximum output (per
power supply)
Maximum output (total for
six power supplies)
Maximum input current
(per power supply)
Maximum input power
(per power supply)
Power connection
Three Phase AC
NA/JPN Power Input
Module
(413380-B21)
Rated input voltage
12.7 A at 208 VAC
12.2 A at 220 VAC
2640 VA
2650W
15,370W
14.4 A at 200 VAC
13.8 A at 208 VAC
13.1 A at 220 VAC
2880 VA
Two 3.05m (10 ft) power cables with NEMA L15-30p
connectors
200 to 208 VAC line to line
3-phase delta
Rated input frequency
50 to 60 Hz
Number of power supplies
supported
Minimum: Three (3)
Maximum: Six (6)
2250W Power Supply
(412138-B21)
Maximum output (per
power supply)
Maximum output (total for
six power supplies)
Maximum input current
per line cord
Maximum input power per
line cord
2250W
Maximum output (per
power supply)
Maximum output (total for
six power supplies)
Maximum input current
per line cord
Maximum input power per
line cord
2450W
Maximum output (per
power supply)
Maximum output (total for
six power supplies)
Maximum input current
per line cord
Maximum input power per
line cord
2450W
2400W Gold Power Supply
(517521-B21, 6-pack)
(499243-B21, single)
2400W Platinum Power
Supply
(517521-B22, 6-pack)
(588603-B21, single)
13,050W
22.8 A at 200 VAC
21.8 A at 208 VAC
7863 VA
14,210W
24.2 A at 200 VAC
23. 2 A at 208 VAC
8352 VA
14,210W
22.9 A at 200 VAC
22 A at 208 VAC
7920 VA
Page 37
QuickSpecs
HPE BladeSystem c7000 Enclosure
Technical Specifications
2650W Platinum Power
Supply
(733460-B21, 6-pack)
(733459-B21, single)
-48VDC Power Input Power connection
Module
(AH331A)
Maximum output (per
power supply)
Maximum output (total for
six power supplies)
Maximum input current
per line cord
Maximum input power per
line cord
2650W
15,370W
25 A at 200 VAC
24 A at 208 VAC
8640 VA
Terminal lug: 45DG 4AWG 1/4 2H
Two-hole lug
45 degree bend
0.25in. (6.4mm) stud hole size
0.63in. (16mm) hole spacing
Rated input voltage
40 to 60 VDC
Number of power supplies
supported
Minimum: One (1)
Maximum: Six (6)
2250W -48VDC Power
Supply
(AH332A)
Maximum output (per
2250W
power supply)
Maximum output (total for 13,050W
six power supplies)
Maximum input current
75A
(per power supply)
2650W -48VDC Power
Supply
(789934-B21)
Maximum input power per 2700W
supply
Maximum output (per
2650W
power supply)
Maximum output (total for 15,370W
six power supplies)
Maximum input current
(per power supply)
73A
Maximum input power per 2892W
supply
High Voltage Power
Input Module
(753623-B21)
Power connection
6x APP Saf-D-Grid receptacle connectors
NOTE: Power cables with APP Saf-D-Grid connectors
are ordered separately.
Rated input voltage
277 VAC, 380 VDC
Rated input frequency
50 to 60 Hz (AC), N/A (DC)
Number of power supplies
supported
Minimum: One (1)
Maximum: Six (6)
Page 38
QuickSpecs
HPE BladeSystem c7000 Enclosure
Technical Specifications
2650W Universal Power
Supply
(753619-B21, 6-pack)
(753618-B21, single)
Acoustic Noise
Option Kits
Maximum output (per
power supply)
Maximum output (total
for six power supplies)
Maximum input current
(per power supply)
15,370W
10.5 A at 277 VAC
7.6 A at 380 VDC
Listed are the declared A-Weighted sound power levels (LWAd) and declared average
bystander position A-Weighted sound pressure levels (LpAm) when the product is
operating in a 23°C ambient environment. Noise emissions were measured in
accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296
(ECMA 109).
Idle
7.1 Bels
LWAd
54 dBA
LpAm
Operating
7.2 Bels
LWAd
54 dBA
LpAm
Power Supply Option Height
Shipping Dimensions Width
Depth
Weight
8.75 in (223 mm)
8.63 in (219 mm)
35.13 in (892 mm)
8.5 lbs (3.85 kg)
Fan Option Shipping Height
Dimensions
Width
Depth
Weight
8.75 in (223 mm)
9.75 in (248 mm)
15.88 in (403 mm)
4.0 lbs (1.8 kg)
Height
BladeSystem
Onboard
Width
Administrator Option Depth
Shipping Dimensions
Weight
2.50 in (63.5 mm)
9.88 in (251 mm)
13.50 in (343 mm)
4.0 lbs (1.8 kg)
EnvironmentalEnd-of-life
friendly Products Management and
and Approach
Recycling
2650W
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product
return, trade-in, and recycling programs in many geographic areas. For trade-in
information, please go to http://www.hpe.com/info/recycle. To recycle your product,
please go to: http://www.hpe.com/info/recycle or contact your nearest Hewlett
Packard Enterprise sales office. Products returned to Hewlett Packard Enterprise will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard Enterprise web
site at: http://www.hpe.com/info/recycle. These instructions may be used by
recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise
OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.
Page 39
QuickSpecs
HPE BladeSystem c7000 Enclosure
Summary of Changes
Date
25-Sep-2017
17-Jul-2017
Version History
From Version 70 to 71
From Version 69 to 70
Action
Changed
Changed
Removed
12-Jun-2017
From Version 68 to 69
Added
Description of Change
Configuration Information Factory Integrated Models section was updated.
Standard Features, Pre-Configured Models, Configuration Information
Factory Integrated Models, and Related Options, sections were updated.
Obsolete SKUs were deleted:
H5M70A, 252663-D74.
SKU added in Configuration Information Integrated Models section:
854194-B22.
Removed
Obsolete SKUs were deleted:
C6N33ABE, C6N32ABE, 689638-B21.
URLs in document were updated.
Obsolete SKUs were deleted:
431643-B21, EH963A, EH964A.
Information in QuickSpecs was updated.
Obsolete SKUs were deleted:
517521-B21, 499243-B21, AH332A, 516733-B21, AW563A,
AW564A, 505959-B21, AF537A, 499243-B21, AH332A, 516733B21, AW563A, AW564A, 505959-B21, BD883A, BS580B.
SKUs updated in Configuration Information - Factory Integrated
Models and Related Options, from: AJ820B, AJ821B, AJ822B; to:
AJ820C, AJ821C, AJ822C.
Obsolete SKU was deleted:
489184-B21
Overview and Related Options sections were updated.
Added two OneView option SKUs E5Y41A and E5Y42A.
Obsolete SKUs deleted:
451439-B21, 451438-B21, AP880A, E7X08A.
Configuration Information Factory Integrated Models and Related
Options sections were updated.
SKUs added in Related Options section:
813874-B21, 805755-B21
Obsolete SKUs were deleted:
E5Y41AAE, AZ871A, AZ878A
AF616A, 505958-B21, AZ872A, AZ879A, AF617A, TC317A,
AZ873A, AZ880A, U6W98E, QW914A, AZ874A, AZ881A,
AZ870A, QW915A, AZ875A, AZ883A, AZ877A, AQ697B, AZ876A,
AZ884A, AZ885A, AZ870A
What’s New was updated with HPE 2650W -48VDC Power Supply
Kit for BladeSystem c7000 Enclosure.
Service and Support section was revised.
Configuration Information Factory Integrated Models, Related
Options, Power Input Module and Power Supply Specifications, and
Technical Specifications were revised.
Overview, Service and Support, Configuration Information Factory
Integrated Models and Related Options sections were updated
SKUs Added on HPE BladeSystem c-Class Network Interconnects:
751465-B21, 778720-B21, 466482-B21
Obsolete SKUs removed:
AF536A, AT120A
Notes were updated throughout the QuickSpecs
Sub-header was added: Fan Bay and Device Bay Numbering
Populating Guidelines.
Device bay and fan population guidelines were updated
Overview, Pre-configured Models and Configuration Information
03-Apr-2017
From Version 67 to 68
Changed
Removed
13-Feb-2017
From Version 66 to 67
Changed
Removed
25-Mar-2016
From Version 65 to 66
Changed
Removed
15-Jan-2016
From Version 64 to 65
Changed
Added
Removed
28-Sep-2015
From version 63 to 64
Changed
Added
Removed
17-Aug-2015
From Version 62 to 63
Changed
9-Feb-2015
From Version 61 to 62
Changed
Added
Removed
19-Dec-2014
21-Nov-2014
From Version 60 to 61
From Version 59 to 60
Changed
Changed
7-Nov-2014
From Version 58 to 59
Changed
Page 40
QuickSpecs
HPE BladeSystem c7000 Enclosure
Summary of Changes
25-Sep-2014
9-Sep-2014
18-Aug-2014
From Version 57 to 58
From Version 56 to 57
From Version 55 to 56
Changed
Changed
Changed
Added
24-Jun-2014
From Version 54 to 55
Changed
Removed
Added
10-Jun-2014
31-Mar-2014
10-Dec-2013
11-Oct-2013
From Version 53 to 54
From Version 52 to 53
From Version 51 to 52
From Version 50 to 51
Changed
Added
Changed
Changed
13-Sep-2013
From Version 49 to 50
Changed
30-Aug-2013
From Version 48 to 49
Changed
14-Jun-2013
From Version 47 to 48
Changed
10-Jun-2013
From Version 46 to 47
Changed
28-Mar-2013
15-Mar-2013
From Version 45 to 46
From Version 44 to 45
Changed
Changed
1-Mar-2013
From Version 42 to 44
Removed
19-Feb-2013
From Version 41 to 42
Added
Changed
14-Dec-2012
From Version 40 to 41
Changed
Factory Integrated Models sections were updated
Changes were made throughout the QuickSpecs.
Changes were made throughout the QuickSpecs.
Overview, Related Options and Technical Specifications sections
were updated
SKUs added on configuration Information Factory Integrated
Models section:
753623-B21, 753618-B21, 753619-B21, C6N33ABE,
SKUs added on related options section:
J6W98A, J6W99A, J6X00A, J6X01A, J6X02A, J6X03A
Power Input Module and Power Supply Specifications section added
Overview, Configuration Information Factory Integrated Models,
Related Option, Device Bay and Fan Bay Numbering and Population
Guidelines, Technical Specificationssections were updated
SKU 691380-B21 was deleted, HPE Power Distribution Units SKUs
were deleted
HPE Data Center Racks SKUs on Configuration Information Factory
Integrated Models section, HPE Power Distribution Units SKUs were
added
Changes were made throughout the QuickSpecs.
HPE OneView Software was added.
Changes were made throughout the QuickSpecs.
Changes made to Step 5 & 6 of Configuration Information and to
the Related Options section.
Models, throughout Configuration Information - Factory Integrated
Models, and Related Options were revised.
Changes made in the Configuration Information, Related Options
and Technical Specifications sections.
2650 Watts Platinum Hot Plug Power Supply was added
HPE BladeSystem Power Sizer was removed
Changes made in the following sections:
Service and Support
Configuration Information - Steps 2 & 5
Related Options
Changes made in the North America and Canada versions only.
Changed name of product throughout document.
Changes made in the HPE Insight Management software,
Configuration Information: Steps 2 - 7 and Related Options sections
Related Options: Removed TC276AAE, 436222-B21 and
TC277AAE from the HPE Insight Software section.
Added the What's New section
Increased mid-plane bandwidth
Intelligent Infrastructure
2400W Platinum Hot Plug Power Supply (80 PLUS certified)
Single Phase Intelligent Power Module
Location Discovery Services
Support for HPE Insight Control 7.2 and higher releases
Changed name of product throughout document.
Changed name of HPE DSB400c Storage Blade to HPE D2200sb
Storage Blade throughout document.
Completely revised the Service and Support sections.
Changes made in the HPE Insight Management software,
Configuration Information: Steps 2 - 7 and Related Options sections
Changed SB40c to D2200sb throughout the QuickSpecs.
Changes made to Insight Management section.
Completely revised the Service and Support sections.
Page 41
QuickSpecs
HPE BladeSystem c7000 Enclosure
Summary of Changes
24-Sep-2012
From Version 39 to 40
Changed
31-Aug-2012
14-May-2012
26-Mar-2012
6-Mar-2012
9-Jan-2012
14-Nov-2011
From Version 38 to 39
From Version 37 to 38
From Version 36 to 37
From Version 35 to 36
From Version 34 to 35
From Version 33 to 34
Changed
Changed
Changed
Added
Removed
Changed
29-Sep-2011
From Version 32 to 33
Changed
26-Sep-2011
From Version 31 to 32
Changed
30-Aug-2011
From Version 30 to 31
Changed
29-Jun-2011
24-Jun-2011
From Version 29 to 30
From Version 28 to 29
Changed
Changed
23-Jun-2011
3-Jun-2011
29-Apr-2011
From Version 27 to 28
From Version 26 to 27
From Version 25 to 26
Changed
Changed
Changed
14-Feb-2011
From Version 24 to 25
Changed
8-Oct-2010
From Version 23 to 24
Changed
Changes made throughout the Configuration Information and
Related Options sections
Changes were made in HPE BladeSystem c-Class Overview,
Configuration Information Factory Integrated Models and Related
Options sections.
Changes made throughout the QuickSpecs.
Changes made in the Related Options section.
Changes made to the HPE Optical Drives.
Added in the reference to G8.
Removed a reference to G8.
Insight Management and HPE Insight Foundation were revised in
HPE Insight management software
Optimized, Standard and Basic Care Packages were updated in
Service and Support
HPE Tape Backup was revised in Related Options
Note was added to Power Cords
Revisions made in the Configuration Information and Related
Options sections.
Power Supplies, Cisco MDS 9124e Fabric Switch for HPE c-Class
BladeSystem, HPE Ultrium Tape Blades and HPE Pointnext
operational services were revised.
Power Distribution Units were revised in Configuration Information
Factory Integrated Models
Product descriptions were revised throughout Related Options
Changes were made within North America and Canada only.
Changes were made throughout, including removing HPE SAS
Switches from Related Options and adding HPE USB Keyboard and
Mouse to HPE Rack Options.
Link was corrected in Service and Support.
Changes were made within North America and Canada only.
Changes made to revise the Service and Support section along with
other changes to the Overview, Configuration Information and
Related Options sections.
HPE BladeSystem BLc7000 c-Class Server Blade Enclosures, HPE
Insight Software, HPE Virtual Connect Enterprise Manager, HPE
Uninterruptible Power Systems, HPE Rack Series and HPE Tape
Backup product descriptions were revised
HPE Virtual Connect FlexFabric 10/24 Enterprise Edition for
BladeSystem c7000 and HPE Virtual Connect FlexFabric 10Gb/24port Module for c-Class BladeSystem were added to HPE
BladeSystem c-Class Network Interconnects
HPE SB40c with (4) 300GB SAS SFF Bundle was added to HPE cClass Storage Blades
TFT7600 Rackmount Keyboard Monitor, USB Interface Adapter - 1
Pack, USB Virtual Media Interface Adapter and Serial Interface
adapter - 1 pack with power supply were removed from HPE Rack
Options
HPE Tape Backup and HPE Pointnext operational services were
revised
Service and Support was added
HPE Optical Drives was added to Related Options
10642G2 and 10647G2 1200 mm Shock Racks were added to
HPE Rack Series
HPE TFT7600 G2 KVM Console Rackmount Keyboard Monitors
were added to HPE Rack Options
HPE 1/10Gb Virtual Connect Ethernet Module for c-Class
Page 42
QuickSpecs
HPE BladeSystem c7000 Enclosure
Summary of Changes
2-Jul-2010
From Version 22 to 23
Removed
25-Jun-2010
21-Jun-2010
From Version 21 to 22
From Version 20 to 21
Removed
Changed
19-Feb-2010
From Version 19 to 20
Changed
25-Nov-2009
16-Nov-2009
2-Oct-2009
From Version 18 to 19
From Version 17 to 18
From Version 16 to 17
Changed
Changed
Changed
14-Aug-2009
From Version 15 to 16
Changed
17-Jul-2009
From Version 14 to 15
Changed
3-Jul-2009
From Version 13 to 14
Changed
BladeSystem was removed from HPE BladeSystem c-Class Network
Interconnects
2x1x16 IP Console Switch with Virtual Media was removed from
HPE KVM Switch Options
HPE Disk Backup was removed from Related Options
HPE Virtual Connect FlexFabric 10/24 Enterprise Edition for
BladeSystem c7000 was removed from HPE BladeSystem c-Class
Network Interconnects.
Removed a reference to an unavailable product.
HPE BLc Virtual Connect FlexFabric 10Gb/24-port Module Option
and HPE Virtual Connect FlexFabric 10/24 Enterprise Edition for
BladeSystem c7000 were added and HPE BladeSystem c-Class
Virtual Connect 1Gb SX SFP Option Kit and RJ-45 SFP Option Kit,
HPE GbE2c Layer 2/3 Ethernet Blade Switch Advanced
Functionality Software, HPE 1:10 GbE BLc Advanced Functionality
Software, HPE 10Gb Ethernet BL-c Switch and HPE 10GbE BLc
Advanced Functionality Software were removed from HPE
BladeSystem c-Class Network Interconnects
HPE 6X 2400W Platinum Efficiency FIO Power Supply and HPE
2400W Platinum Hot-Plug Power Supply were added to HPE
Power Supplies
NOTE was added to Step 4
HPE 4Gb Virtual Connect Fibre Channel Module for c-Class
BladeSystem, HPE Brocade 4/12 SAN Switch and 4/12 SAN Switch
Upgrade LTU and HPE Brocade 4/24 SAN Switch and 4/24 SAN
Switch Power Pack were removed
HPE Insight Control, No Media 1-Server License including 1 year of
24x7 Technical Support and Updates was removed from HPE
Insight Software
HPE StorageWorks MSL2024 2 LTO-2 Ultrium 448 SCSI Drive
Library, HPE StorageWorks MSL4048 1 LTO-3 Ultrium 960 SCSI
Drive Library and 960 4 GB FC Library and HPE StorageWorks
Virtual Library Systems were removed from HPE Tape Backup
HPE Power Supplies, HPE Insight Control, HPE Enclosure, HPE
Cooling Options, HPE Uninterruptible Power Systems, HPE Tape
Backup and HPE Disk Backup were revised throughout the
QuickSpecs.
Minor edits were made within the QuickSpecs.
Changes were made throughout the QuickSpecs.
Changes made throughout the QuickSpecs except for the Storage
and Technical Specifications sections.
Revised Step 5 of the Configuration Information Factory Integrated
Models section
Added a NOTE for HPE c7000 Onboard Administrator with KVM to
Step 4 of the Configuration Information Factory Integrated Models
section and c7000 Enclosure Options in the Related Options
section
Removed HPE c7000 Redundant Onboard Administrator Options
from Step 4 of the Configuration Information Factory Integrated
Models section and c7000 Enclosure Options in the Related
Options section
Revisions were made in the HPE BladeSystem c-Class Overview
section, Configuration Information Factory Integrated Models
section and to the Related Options section.
Corrected Part Number for HPE BLc7000 Insight Control suite for
Linux 16 License in Step 3 of the Configuration Information Factory
Page 43
QuickSpecs
HPE BladeSystem c7000 Enclosure
Summary of Changes
2-Jun-2009
From Version 12 to 13
Added
Changed
29-Apr-2009
From Version 11 to 12
Changed
27-Apr-2009
30-Mar-2009
From Version 10 to 11
From Version 9 to 10
Changed
Added
Changed
26-Jan-2009
From Version 8 to 9
Added
Changed
17-Nov-2008
From Version 7 to 8
Changed
Integrated Models section.
All c7000 enclosures support both models of Onboard
Administrator to NOTE in Step 4 of the Configuration Information
Factory Integrated Models section
Part numbers starting with 507 to NOTE in HPE BladeSystem
InfiniBand Interconnects in Step 5 of the Configuration Information
Factory Integrated Models section
NOTE to HPE c7000 Redundant Onboard Administrator Options
for c7000 Enclosure Options in the Related Options section
Updated HPE BladeSystem Power Sizer in the HPE BladeSystem cClass Overview section
Tape Blades were changed to HPE Ultrium Tape Blades in the
Related Options section
Changes affected the North America and Canada versions only. Just
the date and version were changed in the Worldwide version.
Changes were made throughout the QuickSpecs.
Active Cool 200 Fan and HPE ProLiant Onboard Administrator
throughout the QuickSpecs
HPE StorageWorks 3Gb SAS BL Switch and HPE 4x QRD IB Switch
Module for HPE c-Class BladeSystem to Step 5 of the Configuration
Information Factory Integrated Models section and Related Options
section
HPE 14.4 kVA Modular PDU to Step 6 of the Configuration
Information Factory Integrated Models section
Completely revised Insight Control Suites throughout the
QuickSpecs and Server Management Stand Alone Products in the
HPE BladeSystem c-Class Overview and Related Options sections
and Core Infrastructure Management and URL for HPE
BladeSystem Power Sizer in the HPE BladeSystem c-Class Overview
section
Revisions were made throughout Step 2 of the Configuration
Information section
Removed NOTE from HPE BladeSystem c-Class c7000 Enclosure
in the HPE BladeSystem c-Class Overview section and 10642 G2
(42U) Rear Extension Kit and HPE Modular Cooling System from
the Related Options section
NOTE for HPE 2400W High Efficiency Hot Plug Power Supply in
Step 2 of the Configuration Information Factory Integrated Models
and Related Options sections
HPE StorageWorks SB920c Tape Blade to HPE c-Class Tape
Blades in the Related Options section
HPE Airflow Optimization section to the Related Options
HPE Insight Control Environment for Linux section of HPE Insight
Control Environment for BladeSystem Management Suites in the
Related Options section
Updated HPE Rack 10000 G2 Series in the Related Options section
Minor formatting and grammatical changes were made within Step
5 of the Configuration Information Factory Integrated Models and
the Technical Specifications sections
Changes were made to the following sections:
Overview:
What's New
At A Glance
HPE BladeSystem c-Class Overview:
Rack Airflor Requirements
Server Management Stand Alone Software
Page 44
QuickSpecs
HPE BladeSystem c7000 Enclosure
Summary of Changes
15-Sep-2008
From Version 6 to 7
Added
Changed
8-Aug-2008
From Version 5 to 6
Added
Changed
14-Jul-2008
From Version 4 to 5
Changed
Configuration Information Factory Integrated Models
Step Two
Step Five
Step Six
Related Options
Changes were made throughout this section
Technical Specifications
HPE Blade System
Power
SAS Enterprise drives have a 3 year warranty regardless of the
system in which they are installed to the Warranty section of the At
A Glance
HPE 1:10 GbE BLc Advanced Functionality Software
HPE 10Gb Ethernet BL-c Switch
HPE GbE2c Layer 2/3 Ethernet Blade Switch Advanced
Functionality Software
Server Management Stand Alone Software Product
NOTES section for the following:
HPE Insight Control Environment for BladeSystem Management
Suite
HPE Virtual Connect Enterprise Manager
HPE PCI Expansion Blades
HPE c-Class Tape Blades
HPE StorageWorks All-in-One Storage Systems
Rack 10000 G2 Series
Tape Libraries
Power Cords
Completely revised the Uninterruptible Power Systems - Rack
Width Dimension for the HPE BladeSystem c7000 Server Blade
Enclosure
2m/6ft IEC C20-C19 jumper cord to the c-Class Power Supply
section in Step 2 of the Configuration Information Factory
Integrated Models and to the c7000 Power Options section of the
Related Options
HPE 17.3 kVA Modular PCU and HP22 kVA Modular PDU to the
HPE Modular Power Distribution Units section in Step 6 of the
Configuration Information Factory Integrated Models-48V DC
Power to Power Cords in the Power section of the Technical
Specifications
Power Cords section in the Related Options
HPE Single Phase and 3-Phase UPS sections in the Related Options
Changes were made to the following sections:
HPE BladeSystem c-Class Overview/Insight Control Environment
for BladeSystem Management Suite
HPE BladeSystem c-Class Overview/Server Management Stand
Alone Software Product - ProLiant Essentials
Configuration Information Factory Integrated Models/HPE
BladeSystem
c-Class SAN Interconnects
Configuration Information Factory Integrated Models/PDU cords
Related Options/HPE BladeSystem c-Class SAN Interconnects
Related Options/HPE Insight Control Environment for BladeSystem
Management Suite
Related Options/Server Management Stand Alone Software Product
- ProLiant Essentials
Related Options/Power Cords
Page 45
QuickSpecs
HPE BladeSystem c7000 Enclosure
Summary of Changes
Removed
12-May-2008
From Version 3 to 4
Changed
11-Feb-2008
05-Oct-2007
From Version 2 to 3
From Version 1 to 2
Changed
Changed
Options were removed from the following sections:
Related Options/Tape Libraries
Related Options/HPE KVM Switch Options
Technical Specifications/Power
Changes were made throughout the Overview, HPE BladeSystem cClass Overview, Configuration Information and Related Options
sections.
Changes were made throughout the QuickSpecs.
Updated the description for part number AF916A.
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other
countries.
c04128339 - 12810 – North America - V71 - 25-September-2017
Page 46
Download PDF