NBAUTO2Txx – Dual 10100 base TX to Fibre Ethernet

NBAUTOT2xx
Dual 10/100BaseTX to Fibre Ethernet Bridge Media
Converter
Feature:
•
•
•
•
•
•
•
•
•
•
•
•
•
Quick and easy setup with Web-based management
Dual 10/100BaseTX auto-negotiation/sensing/MDI/MDI-X on TP ports
Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX/100Base-FX and IEEE 802.3x flow
control
Extends network span from 2km (Multimode) and 20/40/60/80km (Single Mode)
Supports back-pressure-based flow control for Half-Duplex and pause-frame-based flow control for
Full-Duplex
Supports Store & Forward architecture and performs forwarding and filtering at non-blocking full wire
speed
Port-based 802.1q VLAN supported
Supports Port Security, Broadcast Storm control, Bandwidth Control (as FULL,128Kb, 256Kb,
512Kb,1M, 2M, 4M, 8M)
Spanning tree protocol supported, Smart Cable Analyzer, QoS and Direct Forwarding function
Reset switch to factory default
Supports packet length up to 1536/1552 bytes
Front panel mounted diagnostics LED’s
Cost effect solution proven in Africa with local support.
10/100BaseTX to Fibre Ethernet Bridge Media Converter
The Netshield dual 10/100BaseTX, NBAUTO2TXX, is dual rate adapting 10/100Mbps fast Ethernet to fibre bridging
Converter. It provides two 10/100M ports switch auto-negotiation and auto-MDI/MDIX and one 100M fibre port which
can extend the network local network, the units is idea for installations where only two remote workstation need to be
connected over a fibre extension or where two remote 10/100Base outlets are required, this reduces the required
capital expenditure for small installations or the duplication of copper infrastructure in large installations. . The units
are compatible with the single port NBAOTUTXX units and fully complies with IEEE802.3 and IEEE 802.3u Standards.
Product Specifications:
Standard:
IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX/FX and
IEEE 802.3x flow control
TP Port:
Dual 10/100Mpbs on shielded RJ-45
FX Port:
100Base-FX, SC/ST connector
LED Indicators:
Power, Link/Act, Speed, Duplex/Collision
Input Power:
100 - 240VAC , 50 to 60Hz feed into external power supply
Output Power:
DC 5V/2A External Power supply input into unit (Maximum)
Power Consumption:
Temperature:
4.2 Watt (Typical)
Operational 0℃ to 60℃ and -20℃ to 80℃ storage
Humidity:
5% to 90% non-condensing
Dimensions:
Unit size 26.7(H) x 70.8(W) x 94(B) mm and Packaging size 55(H) x 160(W) x 210(B) mm
Shipping Weight:
0.8Kg
Product Illustration:
Product matrix:
Product Code
Description
NBAUTO2T3C
10/100Base-TX/FX Bridge Media
Converter
10/100 Base-TX/FX Bridge Media
Converter
NBAUTO2T3T
NBAUTO2TCS
NBAUTO2TCS-40
NBAUTO2TCS-60
NBAUTO2TCS-80
10/100 Base-TX/FX Bridge Media
Converter
10/100 Base-TX/FX Bridge Media
Converter
10/100 Base-TX/FX Bridge Media
Converter
10/100 Base-TX/FX Bridge Media
Converter - DFB Laser
Wave
Length
1300nm
Connector
type
SC
Fibre type
Distance
2Km
TX min
Power
-14dB
TX Max
Power
-8dB
RX
Sensitivity
-32dBm
Link
Budget
18dB
Multi mode
1300nm
ST
Multi mode
2Km
-14dB
-8dB
-32dBm
18dB
1300nm
SC
Single mode
20Km
-15dB
-8dB
-32dBm
17dB
1300nm
SC
Single mode
40Km
-10dB
-6dB
-34dBm
24dB
1300nm
SC
Single mode
60Km
-5dB
0dB
-34dBm
29dB
1550nm
SC
Single mode
80Km
-5dB
0dB
-34dBm
29dB
Download PDF