IES-2008B - Lantech Communications Global, Inc.

1
Industrial Managed Switches
IES-2008B
8 10/100TX Industrial Managed Switch

UL Class I Division II for Group A,B,C and D certified

ATEX Directive 94/9/EC certified (-ATEX model)

Pro-Ring2se for self-heal ring<20ms

Support Advanced SNMP including QoS, IGMP query & source only,
CPU load monitoring

Watchdog Design and Factory Default Button

DNV Type Approved for Ships, Craft and Off-shore Platforms**
Non-DNV model
DNV model
OVERVIEW
The Lantech IES-2008B is an 8-port 10/100BaseTX SNMP
loading is find dead.
industrial switch with Pro-Ring IIs self-recovery scheme in 20ms.
The advanced SNMP management features include QoS for 4
The IES-2008B is designed to meet with critical network
queues, 802.1q VLAN, IGMP snooping, query and source only
environment with IP 30 enclosure and test under extensive
for multicast IP surveillance, SSH/SSL* as well as Web
Industrial EMI and Safety standards. With UL Class I Division II /
Ping,CPU load monitoring, SNTP and SMTP etc
ATEX Directive 94/9/EC approval, the IES-2008B can be
implemented in hazardous or explosive condition without
The Pro-Ring2se self-recovery scheme can recover Ring
accelerating the damage. It’s the best choice for inflammable
network in less than 20ms with single ring up to 50 switches
environment where the liquid, gas and vapor etc might present
with one step setup. Lantech IES-2008B builds all the important
the hazardous condition which generally to be find in mining, oil
management features required in large network like DHCP
& gas, chemical, processing automation areas. It’s also suitable
Client/Server, 802.1X authentication, IGMP Query / Snooping
for surveillance, factory automation, transportation, telecom /
and source only for reverse multicast flow, and advanced
ISP outside terminal, heavy industrial factory and other factory
QoS. It also supports Ping commands via Web to detect
assembly lines.
whether a specific device is still connected for easy
trouble-shooting.
The Lantech IES-2008B is the best to be used in municipal, city
surveillance, automation, transportation, mining, heavy
The IES-2008B has the relay contact that is able to connect with
Industrial factory and other factory assembly lines where needs
alarm system and send Email and SNMP trap alert in case of
reliable and robust network. The -E / -ATEX model can be used
power or port failure.
in extreme environments with an operating temperature range
It also has the built-in factory reset
button and watchdog design can restore all setting back to
of -40°C to 75°C.
factory default and automatically reboot the switch when CPU
Datasheet Version 1.72
www.lantechcom.tw | info@lantechcom.tw
2
Industrial Managed Switches
FEATURES & BENEFITS

Pro-Ring2se for self-recovery scheme in less than

Port base, Tag Base and Type of Service Priority
20ms for single-ring with one setup

Supports Ingress Packet Filter and Egress Rate Limit

Back-plane (Switching Fabric): 1.6Gbps

Supports Broadcast/Multicast Packet Filter Control

1Mbits Packet Buffer / 8K MAC address table

Port Mirror: Monitor traffic in switched networks

UL Class I Division II for Group A,B,C and D certified

ATEX Directive 94/9/EC certified (-ATEX model)

System Log Server/Client

IP30 metal housing with DIN rail and Wall-mount**

SMTP e-mail Alert up to 6 emails
design

Security
 TX, RX, Both of TX and RX Packet

Provides EFT protection ±2000 VDC for power line
 Port Security: MAC address entries/Filter

Supports ±6000 VDC for ESD protection
 IP Source Guard: IP address security management to

Support CPU load monitoring and Web Ping to check if
prevent unauthorized intruder
 Login Security: IEEE802.1X/RADIUS
the connected device is alive

IEEE 802.1d Spanning Tree & IEEE 802.1w RSTP

IGMP with Snooping and Query mode for Multi Media

SNMP Trap

Application
Device cold start, Power status, Authentication
failure, Port Link up/Link down

IGMP source only for reverse multicast application

Relay Alarm Output System Events

Static Multicast Route for non-IGMP application

TFTP & Web Firmware Update & System Configure

Port Based VLAN, 802.1Q Tag VLAN

Port Trunk with LACP

Supports IEEE 802.1ab LLDP
factory default and Watchdog design to automatically

Supports IEEE 802.1p CoS, 4 priority queues per port
reboot switch when CPU load is found dead
Restore/Backup

Factory reset bottom can restore all setting back to
DIMENSIONS (unit=mm)
Non-DNV model
Datasheet Version 1.72
www.lantechcom.tw | info@lantechcom.tw
3
Industrial Managed Switches
DNV model
SPECIFICATION
Hardware Specification
Temperature
IEEE Standards
Case Dimension
IEEE802.3 10Base-T Ethernet
IEEE802.3u 100Base-TX
74(W) x 105 (D) x 152 (H) mm (non-DNV model)
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IP-30,
74.5(W) x 105 (D) x 182 (H) mm (DNV model)
Weight
850 g (non-DNV model)
IEEE802.3af Power over Ethernet
1000 g (DNV model)
IEEE802.1d Spanning Tree
Fan Number
0
IEEE802.1w Rapid Spanning Tree
Installation
DIN Rail and Wall Mount** Design
IEEE802.1p Class of Service
EMI & EMS
FCC Class A, CE EN61000-4-2,
IEEE802.1Q VLAN Tag
CE EN61000-4-3, CE EN61000-4-4,
IEEE802.1x User Authentication (Radius)
CE EN61000-4-5, CE EN61000-4-6,
IEEE802.1ab LLDP
CE EN61000-4-8, CE EN61000-4-11,
Switch Architecture
Back-plane (Switching Fabric): 1.6Gbps
Transfer Rate
14,880pps for Ethernet port
CE EN55032 Class A, CE EN55024
Safety
UL 60950
148,800pps for Fast Ethernet port
UL Class I Division II for Group A,B,C and D
Packet Buffer
1Mbits
hazardous location
MAC Address
8K MAC address table
Flash ROM
4Mbytes
DRAM
32Mbytes
Connectors
10/100TX: 8 x ports RJ-45 with Auto MDI/MDI-X
Power
function
Consumption
RS-232 connector: RJ-45 type
MTBF
1,034,882 hours
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable
Warranty
5 years
EIA/TIA-568 100-ohm (100m)
Software Specification
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable
Management
SNMP v1 v2c, v3/ Web/Telnet/CLI
EIA/TIA-568 100-ohm (100m)
SNMP MIB
RFC 1215 Traps MIB,
Network Cable
Protocol
CSMA/CD
LED
Per unit: Power (Green), Power 1 (Green), Power 2
ATEX Directive 94/9/EC (-ATEX model)
Stability Testing
IEC60068-2-6 (Vibration)
7W at full load
RFC 1213 MIBII
RFC 1158 MIBII
RFC 1157 SNMP MIB,
RFC 1493 Bridge MIB,
(Green), Fault (Yellow), Master (Green)
8 port 10/100: Link/Activity (Green), Full
RFC 1573 IF MIB
RFC 2674 VLAN MIB,
duplex/Collision (Yellow)
R.M. indicator (Green)
Power Supply
Partial RFC 1643 EtherLike,
Partial RFC 1757 RMON,
12V~48VDC(9V~56VDC);Dualt power connector
removable terminal block for master and slave power
Overload current
RFC 2674 Q-Bridge MIB; Bridge MIB,
RFC 2790 Host Resource MIB
Present
LLDP MIB*
RSTP MIB*
protection
Operating Humidity
5% ~ 95% (Non-condensing)
Operating
Standard: -20°C~60°C / -4°F~140°F
Temperature
Wide Operating Temperature (-E / -ATEX / -DNV
model):
-40°C~75°C / -40°F~167°F
Storage
-40°C~85°C / -40°F~185°F
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),
Private MIB
System Information
Show detail info incl.Name , Version
CPU load monitoring for every 1,5,15 minutes
Display network parameters incl. Mac, IP, Gateway,
Netmask
Datasheet Version 1.72
www.lantechcom.tw | info@lantechcom.tw
4
Industrial Managed Switches
Allow adding port description
Pro-Ring 2se
Internet
Pro-Ring 2se system Topologies for network recovery
Bandwidth Control
Support ingress packet filter and egress packet limit
in less than 20ms up to 50 switches.
& Storm Control
The egress rate control supports all of packet type
and the limit rates are 100K~102400Kbps(10/100),
VLAN
Note:Pro-Ring2se is not compatible with
100K~256000Kbps(1000)
Pro-Ring2s/Pro-RingII Pro-Ring I; 20ms recovery is
Ingress filter packet type combination rules are
on fiber port.
Broadcast/Multicast/Unknown Unicast packet,
Port Based VLAN
Broadcast/Multicast packet, Broadcast packet only
IEEE 802.1Q Tag VLAN (256 entries)/ VLAN ID (Up
and all of packet. The packet filter rate can be set
to 4K, VLAN ID can be assigned from 1 to 4096.)
from 100K~102400Kbps(10/100),
Port Trunk with
LACP Port Trunk: 4 Trunk groups/Maximum 4 trunk
LACP
members
LLDP
Supports LLDP to allow switch to advise its
100K~256000Kbps(1000)
Relay Alarm
fail alarm.
Alarm Relay current carry ability: 1A @ DC24V
identification and capability on the LAN
Spanning Tree
Quality of Service
Supports IEEE802.1d Spanning Tree, IEEE802.1w
SNMP Trap
2. Link down
The quality of service determined by port, Tag and
3. Link up
Supports IEEE802.1p class of service, per port
4. Authorization fail
DHCP
Provides DHCP Client/ DHCP Server/ Port and IP
Binding
provides 4 priority queues
Port Security
1. Cold start
Rapid Spanning Tree
IPv4 Type of service, IPv4/IPv6 Different Service
Class of Service
Provides one relay output for port breakdown, power
Supports 100 entries of MAC address for static MAC
DNS
Provide DNS client feature and support Primary and
Secondary DNS server.
and another 100 for MAC filter
Firmware Update
Supports TFTP/Web firmware update, TFTP backup
Port Mirror
Supports 3 mirroring types: "RX, TX and Both packet"
IGMP & Static
Supports IGMP snooping v1,v2
Multicast
256 static multicast forwarding groups and IGMP
Forwarding
query
Factory reset &
Factory reset bottom can restore all setting back to
IP Source Guard
Supports 10 IP addresses that have permission to
Watchdog design
factory default and Watchdog design to automatically
and restore. White list for TFTP upgrade and
configuration editable file
reboot switch when CPU loading is too high
access the switch management and to prevent
ifAlias
unauthorized intruder.
Login Security
Supports IEEE802.1X Authentication/RADIUS/Telnet
Flow Control
Supports Flow Control for Full-duplex and Back
Each port allows importing 128bits of alphabetic
string of word on SNMP and CLI interface
*Future Release
**Optional
Pressure for Half-duplex
System Log
Supports System log record and remote system log
server
SMTP
Supports SMTP Server and 6 e-mail accounts for
receiving event alert
SNTP
Supports SNTP to synchronize system clock to
ORDERING INFOMATION

IES-2008B….………...…….P/N: 8350-232
8 10/100TX Pro-Ring IIs Managed Industrial Switch; -20°C to 60°C

IES-2008B-E…………........P/N: 8350-233
8 10/100TX Pro-Ring IIs Managed Industrial Switch; -40°C to 75°C

IES-2008B-DNV…..…… …P/N: 8350-233DNV
8 10/100TX Pro-Ring IIs Managed Industrial Switch; -40°C to 75°C; DNV type approval

IES-2008B-ATEX………….P/N: 8350-233-ATEX
8 10/100TX Pro-Ring IIs Managed Industrial Switch; -40°C to 75°C; ATEX Directive 94/9/EC
OPTIONAL ACCESSORIES
DIN Rail Power
 MDR-40 Series
40W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ;
Operating Temp. -20°C~70°C (ambient, derating each output at 4% per degree from 60°C ~ 70°C)
 MDR-20 Series
20W Single Output Industrial Din Rail Power; 85-264VAC / 120-370VDC Input Range; Cooling by free air convection; RoHS2 ;
Operating Temp. -20°C~70°C (ambient, derating each output at 2.5% per degree from 50°C ~ 70°C)
Lantech Communications Global Inc.
www.lantechcom.tw
info@lantechcom.tw
© 2016 Copyright Lantech Communications Global Inc. all rights reserved.
The revise authority rights of product specifications belong to Lantech Communications Global Inc.
Lantech may make changes to specification and product descriptions at anytime, without notice.
Datasheet Version 1.72
www.lantechcom.tw | info@lantechcom.tw
Download PDF