OWNER’S MANUAL
M1962D/M2062D
M2262D/M2362D
M2762D
Make sure to read the Safety Precautions before
using the product.
Keep the User's Guide(CD) in an accessible place
for furture reference.
See the label attached on the product and give the
information to your dealer when you ask for service.
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 6819 : M1962D
6820 : M2062D
6821 : M2262D
6822 : M2362D
6823 : M2762D
PREPARATION
FRONT PANEL CONTROLS
■
This is a simplified representation of the front panel. The image shown may be somewhat different from your set.
Headphone
Jack
IR receiver
(Remote controller
receiver)
Power Indicator
illuminates blue when the
set is switched on.
Note:You can adjust
Power indicator in the
OPTION menu.
INPUT
Button
INPUT
OK VOLUME PROGRAMME Power
MENU
Buttons
Button Button Buttons
Button
MENU
OK
VOL
PR
Light Sensor
This is lens for light sensor
select outside luminance,
when setting AUTO
BRIGHT ON.
1
PREPARATION
BACK PANEL INFORMATION
■
This is a simplified representation of the back panel. The image shown may be somewhat different from your set.
1
3
2
3
4
AUDIO IN
(RGB/DVI)
5
6
COMPONENT
IN
OPTICAL
DIGITAL
AUDIO OUT
Y
AV
V1
AV 1
VIDEO
PR
DVI-D IN (PC)
AC IN
PCMCIA (Personal Computer Memory Card
International Association) Card Slot
This feature is not available in all countries.
2
Power Cord Socket
This set operates on AC power. The voltage is indicated
on the Specifications page. Never attempt to operate
the set on DC power.
HDMI Input (Not Support PC)
Connect a HDMI signal to HDMI IN.
Or DVI (VIDEO) signal to HDMI IN with DVI to HDMI
cable.
4
RGB/DVI Audio Input
Connect the audio from a PC.
5
Optical Digital Audio Out
Connect digital audio from various types of eguipment
6
RGB INPUT (PC)
Connect the output from a PC.
7
USB IN
R
9
1
3
2
8
AUDIO
7
RS-232C IN
(CONTROL & SERVICE)
10
ANTENNA/
CABLE IN
(MONO) L -AUDIO- R
L
AC IN
USB IN
AV
V2
AV 2
VIDEO
PB
RGB IN (PC)
HDMI IN 1
AV IN 3
11
12
13
8
DVI-D Input
Connect the output from a PC.
9
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
10
Component Input
Connect a component video/audio device to these
jacks.
11
Audio/Video Input
Connect audio/video output from an external device to
these jacks.
12
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external
device to these jacks.
13
Antenna Input
Connect over-the-air signals to this jack.
<M1962D/M2062D/M2262D/M2362D>
PREPARATION
STAND INSTALLATION
■
The image shown may be somewhat different from your set.
1
Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
3
Turn the Stand Base Lock through 90° to fix the Stand Base to the Stand Body.
Insert the s t a n d b a s e into the product
OPEN
OPEN
2
Base Lock
4
5
OPEN
OPEN
<Locked>
3
<M2762D>
PREPARATION
STAND INSTALLATION
■
The image shown may be somewhat different from your set.
1
Carefully place the product screen side down on a
cushioned surface that will protect product and
screen from damage.
3
Attach the monitor to the Stand Base by turning the screw to the right.
*Turn the screw by using the screw handle
4
4
2
Insert the s t a n d b a s e into the product
<M1962D/M2062D/M2262D/M2362D>
PREPARATION
DETACHING STAND
■
The image shown may be somewhat different from your set.
Place the set screen side down on a cushion or
soft cloth.
3
Turn the Stand Base Lock through 90° to separate the Stand Base from the Stand Body.
4
Pushing Latch inside, Take the stand base from stand body.
Detach the monitor to the Stand Base by turning the screw to the left.
OPEN
OPEN
2
OPEN
OPEN
OPEN
OPEN
1
Latch
5
<M2762D>
PREPARATION
DETACHING STAND
■
The image shown may be somewhat different from your set.
1
Place the set screen side down on a cushion or
soft cloth.
2
Detach the monitor to the Stand Base by
turning the screw to the left.
3
Turn the screw by using the screw handle.
4
Pull the stand base.
5
6
PREPARATION
DETACHING STAND BODY
■
■
The image shown may be somewhat different from your set.
Remove the Stand Body in the same way as the following when using it as a Wall Hook.
<M1962D/M2062D/M2262D/M2362D>
1. Remove the screw 2 point.
2. Pull the stand body.
<M2762D>
1. Remove the screw 4 point.
2. Pull the stand body.
7
PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
For proper ventilation, allow a clearance of 4 inches on each side and from the wall. Detailed installation
instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
4 inches
4 inches
4 inches
4 inches
4 inches
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4 inches on each side and from the wall.
4 inches
4 inches
4 inches
8
4 inches
PREPARATION
POSITIONING YOUR DISPLAY
■
The image shown may be somewhat different from your set.
Adjust the position of the panel in various ways for maximum comfort.
• Tilt range
-5°
15°
LOCATION
Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose
the set to any unnecessary vibration, moisture, dust or heat. Also, ensure that the set is placed in a position to allow a
free flow of air. Do not cover the ventilation openings on the back cover.
If you intend to mount the set to a wall, attach Wall mounting interface (optional parts) to the back of the set.
When you install the set using the wall mounting interface (optional parts), attach it carefully so it will not drop.
- Be sure to use screws and a wall mount that meet VESA standards.
- Using screws longer than those recommended might damage the product.
- Using screws that do not meet VESA standards might either damage the product or result in it coming away from the
wall. We will not be held responsible for any damage resulting from failure to follow these instructions.
< Screw Mounting Interface Dimension >
M 1 9 6 2 D / M 2 0 6 2 D / M 2 2 6 2 D / M 2 3 6 2 D : 100mm x 100mm hole spacing
M 2 7 6 2 D : 200mm x 100mm hole spacing
Warning:
When adjusting the angle of the screen,do not put your
finger(s)in between the head of the monitor and the stand
body.You can hurt your finger(s).
9
PREPARATION
KENSINGTON SECURITY SYSTEM
- The product is equipped with a Kensington Security System connector on the back panel. Connect the
Kensington Security System cable as shown below.
- For detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the
Kensington Security System.
For further information, contact h t t p : / / w w w . k e n s i n g t o n . c o m, the internet homepage of the Kensington
company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and
LCD projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a. If the product feels cold to the touch, there may be a small “flicker” when it is turned on.
This is normal, there is nothing wrong with product.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However,
they have no adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
10
EXTERNAL EQUIPMENT SETUP
■
To prevent equipment damage, never plug in any power cords until you have finished connecting all equipment.
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
■ An antenna cable and converter are not supplied.
■
Wall
Antenna
Socket
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
ANTENNA/
CABLE IN
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
(VHF, UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Antenna
Signal
Amplifier
ANTENNA/
CABLE IN
VHF
■
■
In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown above.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
11
EXTERNAL EQUIPMENT SETUP
■
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
■
The image shown may be somewhat different from your set.
HD RECEIVER SETUP
When connecting with a component cable
1
Connect the SET-TOP outputs to the C O M P O N E N T I N
V I D E O sockets (Y PB PR) on the set.
2
Connect the audio cable from the SET-TOP to C O M P ON E N T I N A U D I O sockets of the set.
3
Press the I N P U T button to select C o m p o n e n t .
Signal
Component
HDMI
480i/576i
Yes
No
480p/576p
Yes
Yes
720p/1080i
Yes
Yes
1080p
Yes
Yes
COMPONENT
IN
Y
VIDEO
1
AUDIO
PB
2
PR
L
R
12
EXTERNAL EQUIPMENT SETUP
1
Connect the HDMI output of the digital set-top box to the
H D M I I N jack on the set.
HDMI IN 1
or
HDMI IN 2
When connecting with a HDMI
1
1
Connect the digital set-top box to H D M I I N jack on
the set.
2
Connect the audio output of the digital set-top box to
the A U D I O I N ( R G B / D V I ) jack on the set.
3
Turn on the digital set-top box. (Refer to the owner’s
manual for the digital set-top box.)
HDMI IN 1
AUDIO IN
(RGB/DVI)
or
HDMI IN 2
When connecting with a HDMI to DVI cable
2
1
AUDIO
DVI OUTPUT
L
R
! NOTE
G HDMI
Input does not support PC mode. If it is connected PC, the screen may not be displayed properly.
13
EXTERNAL EQUIPMENT SETUP
DVD SETUP
When connecting with a component cable
1
Connect the video output sockets (Y PB PR) of the DVD to
the C O M P O N E N T I N V I D E O sockets (Y PB PR) of the set.
2
Connect the audio cable from the DVD to C O M P O N E N T
I N A U D I O sockets of the set.
3
Press the I N P U T button to select C o m p o n e n t.
4
Press the P L A Y button on the DVD.
The DVD playback picture appears on the screen.
Component Input ports
To get better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the set
Video output ports
on DVD player
COMPONENT
IN
Y
VIDEO
1
AUDIO
PB
2
PR
L
R
14
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
EXTERNAL EQUIPMENT SETUP
When connecting with a Euro Scart[DVD]
1
AV 1
AV 2
Connect the Euro scart socket of the DVD to the Euro scart
socket of the set.
2
Press the I N P U T button to select A V 1.
If connected to A V 2 Euro scart socket, select A V 2 input
source.
3
Press the P L A Y button on the DVD.
The DVD playback picture appears on the screen.
1
(R)
(L)
AUDIO/
VIDEO
AUDIO
! NOTE
G
G
Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the AV 1 can be
received. These signals are transmitted, for example, by a paid TV decoder, game machine or photo CD unit, etc.
Please use shielded scart cable.
1
Connect the HDMI output of the DVD to the
H D M I I N jack on the set.
HDMI IN 1
or
HDMI IN 2
When connecting HDMI cable
1
! NOTE
G Set can receive the video and audio signal simultaneously by using a HDMI cable.
G
If the DVD player does not support Auto HDMI, you need to set the DVD output resolution appropriately.
15
EXTERNAL EQUIPMENT SETUP
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and set.
■ Typically a still picture is shown on the VCR. If a user uses 4:3 picture format for a long time, an afterimage
may remain on the sides of the screen.
■
When connecting with an antenna
ANTENNA/
CABLE IN
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
1
Wall Jack
2
Antenna
1
Connect the RF out socket of the VCR to the aerial socket of the set.
2
Connect the aerial cable to the RF aerial in socket of the VCR.
AV 1
16
AV 2
3
Store the VCR channel on a desired programme number using the ‘Manual
programme tuning’ section.
4
Select the programme number where the VCR channel is stored.
5
Press the P L A Y button on the VCR.
R
EXTERNAL EQUIPMENT SETUP
When connecting with a RCA cable
AV 2
R
AV 2
ANT IN
ANT OUT
AV 1
L
3
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
1
AUDIO R
Press the INPUT button to select AV3.
(MONO) L
2
AV-IN 3
VIDEO
1
S-VIDEO VIDEO
AV 1
Connect the audio/video out sockets of the VCR to
AUDIO/VIDEO in sockets of the set.
! NOTE
G
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the set.
USB SETUP
USB IN
1
Connect the USB device to the U S B I N jacks on the
side of set.
2
After connecting the U S B I N jacks, you use the U S B
function. (G p .89)
17
EXTERNAL EQUIPMENT SETUP
When connecting with a Euro Scart[VCR]
1
2
Connect the Euro scart socket of the VCR to the Euro
scart socket of the set.
AV
V1
Press the P L A Y button on the VCR.
If your VCR outputs an AV switching signal via the Scart
lead, the set will auto switch to A V 1 mode on start of
playback, but if you want to keep on watching in TV mode,
press the D / E or NUMBER buttons.
If connected to A V 2 Euro scart socket, select A V 2 input
source.
AV
V2
1
Otherwise press the I N P U T button on the remote control
handset to select A V 1. The VCR playback picture appears
on the screen.
(R)
You can also record programmes received by the set on
video tape.
AUDIO/
VIDEO
(L)
AUDIO
! NOTE
G
G
Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the AV 1
can be received. These signals are transmitted, for example, by a paid TV decoder, game machine or photo
CD unit, etc.
Please use shielded scart cable.
INSERTION OF CI MODULE
Insert the CI Module to P C M C I A (Personal Computer
Memory Card International Association) C A R D S L O T
of set as shown.
For further information, see p. 38.
18
TV
1
PCMCIA
CARD SLOT
- To view the scrambled (paid) services in digital TV
mode.
- This feature is not available in all countries.
1
EXTERNAL EQUIPMENT SETUP
PC SETUP
This product provides Plug and Play capability, meaning that the PC adjusts automatically to the set's settings.
When connecting with a D-sub 15 pin cable
1
Connect the signal cable from the monitor output socket of
the PERSONAL COMPUTER to the PC input socket of the set.
RGB IN (PC)
2
Connect the audio cable from the PC to the A U D I O I N
( R G B / D V I ) sockets of the set.
3
Press the INPUT button to select R G B.
4
Switch on the PC, and the PC screen appears on the set.
The set can be operated as a PC monitor.
AUDIO IN
(RGB/DVI)
1
2
RGB OUTPUT
AUDIO
! NOTE
G
You must use shielded signal interface cables (D sub 15 pin cable, DVI cable) with ferrite cores to maintain
standard compliance for the product.
19
EXTERNAL EQUIPMENT SETUP
When connecting with a DVI cable
1
Connect the DVI output of the PC to the D V I - D I N
jack on the set.
2
Connect the audio cable from the PC to the A U D I O
I N ( R G B / D V I ) sockets of the set.
AUDIO IN
(RGB/DVI)
DVI-D IN (PC)
1
DVI OUTPUT
2
AUDIO
! NOTE
20
G If the set is cold, there may be a small “flicker” when the
G If possible, use the 1920x1080 @ 60 Hz video mode
set is switched on. This is normal, there is nothing
wrong with the set.
G If possible, use the 1360x768 @ 60 Hz video mode to
obtain the best image quality for your LCD monitor. If
used with other resolutions, some scaled or processed
pictures may appear on the screen. The set has been
preadjusted to the mode 1360x768 @ 60
Hz.(( M 1 9 6 2 D )
G If possible, use the 1600x900 @ 60 Hz video mode to
obtain the best image quality for your LCD monitor. If
used with other resolutions, some scaled or processed
pictures may appear on the screen. The set has been
preadjusted to the mode 1600x900 @ 60
Hz.(( M 2 0 6 2 D )
to obtain the best image quality for your LCD monitor.
If used with other resolutions, some scaled or
processed pictures may appear on the screen. The set
has been preadjusted to the mode 1920x1080 @ 60
Hz. ( M 2 2 6 2 D / M 2 3 6 2 D / M 2 7 6 2 D )
G Some dot defects may appear on the screen, like Red,
Green or Blue spots. However, this will have no impact
or effect on the monitor performance.
G Do not press the LCD screen with your finger for a long
time as this may produce some temporary distortion
effects on the screen.
G Avoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may become
permanently imprinted on the screen; use a screen
saver when possible.
EXTERNAL EQUIPMENT SETUP
BACK COVER FOR WIRE ARRANGEMENT
Tie cables together with a cable tie as shown in the
illustration.
R
R
Cable tie
21
EXTERNAL EQUIPMENT SETUP
RGB/DVI[PC]
<M1962D>
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x400
31.468
31.469
37.5
37.879
46.875
48.363
60.123
47.776
47.712
47.7
70
60
75
60
75
60
75
60
60
60
640x480
800x600
1024x768
1280x768
1360x768
1366x768
<M2062D>
Resolution
720x350
720x400
640x480
800x600
832x624
1024x768
1152x870
1280x1024
1280x1024
1600x900
<M2262D/M2362D/M2762D>
Horizontal
Frequency(kHz)
25.175
31.468
31.469
37.5
37.879
46.875
49.725
48.363
60.123
68.681
63.981
79.976
60
Vertical
Frequency(Hz)
70
70
60
75
60
75
65
60
75
75
60
75
60
HDMI[DTV] (Not Support PC)
Resolution
720x480/60p
720x576/50p
1280x720/50p
1280x720/60p
1920x1080/60i
1920x1080/50i
1920x1080/24p
1920x1080/30p
1920x1080/50p
1920x1080/60p
22
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
31.469
31.5
31.25
37.5
44.96
45
33.72
33.75
28.125
27
33.75
56.25
67.43
67.5
60
60
50
50
60
60
60
60
50
24
30
50
60
60
Resolution
720x400
640x480
800x600
1024x768
1152x864
1280x1024
1680x1050
1600x1200
1920x1080
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.290
75.000
66.587
70
60
75
60
75
60
75
75
60
75
60
60
60
60
WATCHING TV /PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the set.
TV/PC
POWER
1
INPUT
1
TV/RADIO TEXT
I/II
MUTE
POWER Switches the set on or off.
TV/PC Selects TV or PC mode.
2
INPUT External input mode rotates in regular sequence.
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
MENU
3
2
TV/RADIO Selects Radio or TV channel.
I/II Selects the sound output.(Refer to the p.70,71)
MUTE Switches the sound on or off.
EXIT
3
OK
4
0~9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.(Refer to the p.39)
GUIDE
INFO i
Q.VIEW Returns to the previously viewed programme.
4
RETURN
VOL
PR
*
MENU Selects a menu. (Refer to the p.28)
5
EXIT Clears all on-screen displays.
FAV
INFO i Shows the present screen information.
Q.MENU
T.OPT
SUBTITLE
MARK
GUIDE Shows programme schedule.(Refer to the p.40~42)
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/Right) the system settings to your preference.
OK Accepts your selection or displays the current mode.
5
VOLUME UP Adjusts the volume.
/DOWN
RETURN Allows the user to move back one step in an interactive application, EPG or other user interaction function.
* No function
FAV Displays the selected favourite programme.(Refer to the p.39)
Programme Selects a programme.
UP/DOWN
23
WATCHING TV /PROGRAMME CONTROL
1
TV/PC
POWER
TV/RADIO TEXT
I/II
INPUT
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.
(Refer to the p.97~99)
MUTE
1
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
MENU
2
USB Menu Controls USB menu (Photo List and Music List)
control buttons (Refer to the p.89)
3
EXIT
Q.MENU Select the desired quick menu source.
(Refer to the p.27)
MARK Check and un-check programmes in the recorded set
menu.
OK
GUIDE
INFO i
RETURN
VOL
PR
*
FAV
2
Q.MENU
T.OPT
SUBTITLE
MARK
3
Installing Batteries
24
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+ with +, - with -).
■
Install two 1.5V AAA batteries. Don’t mix old or used batteries with
new ones.
■
Close cover.
WATCHING TV /PROGRAMME CONTROL
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
1
Firstly,connect the power cord correctly and check the main power( r / I )on the TV.
2
Set ID : Off
In standby mode to turn TV on, press the INPUT or PR D / E button on the TV or press the POWER button on the
remote control and the TV will switch on.
Set ID : On
In standby mode to turn TV on, press the INPUT or PR D / E button on the TV or press the POWER, INPUT, PR D /
or NUMBER button on the remote control and the TV will switch on.
E
Initializing setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust
the L a n g u a g e, M o d e S e t t i n g, C o u n t r y, A u t o t u n i n g.
Note:
a. If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b. Press the RETURN button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV featur s might not work,
depending on the DTV broadcasting environment.
H o m e U s e r” mode is the optimal setting for home environments, and is the TV's default mode.
d. "H
e. "SS t o r e D e m o"mode is the optimal setting for store environments. If a user modifies image quality data,
“SS t o r e D e m o” mode initializes the product to the image quality set by us after a certain period of time.
H o m e U s e, S t o r e D e m o) can be changed by executing M o d e S e t t i n g in the O P T I O N menu.
f. The mode (H
25
WATCHING TV /PROGRAMME CONTROL
PROGRAMME SELECTION
1
Press the P R + or - or NUMBER buttons to select a programme number.
TV/PC
POWER
TV/RADIO TEXT
VOLUME ADJUSTMENT
1
I/II
INPUT
MUTE
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
Press the VOL + or - button to adjust the volume.
If you want to switch the sound off, press the MUTE
button.
MENU
EXIT
OK
You can cancel this function by pressing the MUTE,
VOL + or - , or I/II button.
GUIDE
INFO i
RETURN
VOL
PR
*
FAV
Q.MENU
26
T.OPT
SUBTITLE
MARK
WATCHING TV /PROGRAMME CONTROL
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
• A s p e c t R a t i o: Selects your desired picture format.
For Zoom Setting, select 14:9, Zoom and Cinema
Zoom in Ratio Menu. After completing Zoom Setting,
the display goes back to Q.Menu.
• P i c t u r e M o d e : Selects your desired Picture Mode.
• S o u n d M o d e : It is a feature to automatically set the
sound combination which it deems the best for the
images being watched. Selects your desired Sound
Mode.
• A u d i o : Selects the sound output.
• S l e e p T i m e r : Sets the sleep timer.
• U S B E j e c t : Selects “USB Eject” in order to eject USB
device.
Q.Menu
Aspect Ratio
16:9
Zoom Setting
Picture Mode
Standard
Sound Mode
Standard
Audio
L+R
Sleep Timer
Off
Eject
USB Eject
Close
1Q. MENU
Display each menu.
2
OK
or
Select your desired Source.
3
OK
• Press the RETURN button to move to the previous menu screen.
27
WATCHING TV /PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your set's OSD (On Screen Display) may differ slightly from what is shown in this manual.
SETUP
Move
PICTURE
OK
Move
AUDIO
OK
Move
Auto tuning
Aspect Ratio : 16:9
Auto Volume : Off
Manual tuning
Auto Bright : Off
Clear Voice II : Off
Programme Edit
Picture Mode : Vivid
• Level
OK
3
-
+
0
L
R
Software Update : On
• Backlight 100
Balance
Diagnostics
• Contrast 100
Sound Mode : Standard
CI Information
• Brightness 50
• SRS TruSurround HD : Off
• Sharpness 70
• Treble
50
• Colour
• Bass
50
60
E
E
TIME
OPTION
Move
Menu Language
: English
Audio Language
: English
OK
SETUP
PICTURE
AUDIO
OPTION
LOCK
INPUT
TIME
USB
Subtitle Language : English
Hard of Hearing(
)
: Off
Data Service
: MHEG
Country
: UK
Input Label
Key Lock
Clock
Off Time
On Time
Sleep Timer
Auto Off
Move
OK
: Off
: Off
: Off
: On
: Off
E
LOCK
Move
Lock System
INPUT
OK
: Off
Move
OK
USB
Antenna
Photo List
Set Password
AV 1
Music List
Block Programme
AV 2
Parental Guidance : Off
AV 3
Input Block
Component
RGB
HDMI 1
HDMI 2
E
1MENU
Display each menu.
2
OK
Select a menu item.
3
OK
Move to the pop-up menu.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
28
Move
OK
WATCHING TV /PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming in digital mode, all previously stored service information will be deleted.
SETUP
Move
SETUP
OK
A u t otuning
tuning
Auto
Manual tuning
Programme Edit
Software Update : On
Diagnostics
CI Information
1MENU
Move
A u t otuning
tuning
Auto
Manual tuning
Programme Edit
Software Update : On
Diagnostics
CI Information
Select S E T U P.
OK
All service-information will be updated.
Continue?
Yes
No
SECAM L Search
V Automatic Numbering
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
2
• If you wish to keep on auto tuning, select
OK
Select A u t o T u n i n g.
OK
Select Y e s.
OK
Run Auto tuning.
YES using the F G button. Then, press the
OK button. Otherwise, select NO.
3
4
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
29
WATCHING TV /PROGRAMME CONTROL
MANUAL PROGRAMME TUNING (IN DIGITAL MODE)
Manual Tuning lets you manually add a programme to your programme list.
SETUP
Move
SETUP
OK
Auto tuning
Manual
M a n u atuning
l tuning
Programme Edit
Software Update : On
Diagnostics
CI Information
Move
Auto tuning
Manual
M a n u atuning
l tuning
Programme Edit
Software Update : On
Diagnostics
CI Information
OK
F
DTV
G
Your receiver will add this
channel to your channel list.
UHF CH.
Bad
30
Normal
Good
Add
Close
1MENU
Select S E T U P.
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
2
OK
Select M a n u a l T u n i n g.
OK
Select D T V.
3
4
Select the desired channel number.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
30
WATCHING TV /PROGRAMME CONTROL
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
Move
SETUP
OK
Auto tuning
Manual
M a n u atuning
l tuning
Programme Edit
Software Update : On
Diagnostics
CI Information
Move
OK
Auto tuning
Manual
M a n u atuning
l tuning
Programme Edit
Software Update : On
Diagnostics
CI Information
TV
F
G
Storage
1
System
BG
Band
V/UHF
Channel
1
Search
Name
F G
C 01
Store
Close
1MENU
6
Select S E T U P.
Select V / U H F or C a b l e.
7
2
or
Select M a n u a l T u n i n g.
OK
1
2
4
5
6
7
8
9
3
Select the desired
channel number.
0
8
3
Start searching.
Select T V.
OK
4
or
1
2
3
4
5
6
7
8
9
0
9
Select the desired programme number on.
OK
Select S t o r e.
5
Select a TV system.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
• Use NUMBER buttons to input a 4-digit password in Lock System ‘On’.
• L: SECAM L/L’ (France)
BG: PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M. East / Africa / Australia)
I: PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK: PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
• To store another channel, repeat steps 4 to 9.
31
WATCHING TV /PROGRAMME CONTROL
A
Assigning a station name
You can assign a station name with five characters to each programme number.
1MENU
5
Select SETUP.
OK
2
OK
Select Manual Tuning.
Select the position and make
your choice of the second
character, and so on.
You can use the alphabet A to
Z , the number 0 to 9 , +/ -, and
space.
6
3
OK
OK
Select Close.
OK
Select Store.
Select TV.
7
4
Select Name.
A
Fine Tuning
Normally fine tuning is only necessary if reception is poor.
1MENU
4
Select SETUP.
Select Fine.
5
2
OK
Select Manual Tuning.
OK
Select TV.
3
Fine tune for the best picture and
sound.
6
OK
Select Store.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
32
WATCHING TV /PROGRAMME CONTROL
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using PR + / - button during
TV viewing.
If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or
select it in the Programme edit menu
This function enables you to skip the stored programmes.
In some countries, it is possible to move a programme number by using the YELLOW button only.
1
SETUP
Move
YLE TV1
OK
Auto tuning
Manual tuning
Programme
P r o g r a m mEdit
e Edit
Software Update : On
Diagnostics
CI Information
DTV
RADIO
1 YLE TV1
2 YLE TV2
4 TV4 Stockholm
5 YLE FST
6 CNN
8 YLE24
9 YLE Teema
Favourite List
TV
14 TV4 Film
24 TV4 Fakta
50 TV400
24 TV4 Fakta
84 Kanal Lokal
24 TV4 Fakta
86 Info/3sat
87 Doku/Kika
88 TVE 1
E
FAV Favourite
Pr. Change
D
F G Navigation
E
P
Page Change
RETURN Previous
Skip
1MENU
Select S E T U P.
• Use NUMBER buttons to input a 4-digit
password in Lock System ‘On’.
2
OK
Select P r o g r a m m e E d i t.
3
OK
Enter the Programme Edit.
4
Select a programme to be stored or skipped.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
33
WATCHING TV /PROGRAMME CONTROL
IN DTV/RADIO MODE
A
Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE
Turn the skipped programme number to blue.
3
BLUE
A
that you will be unable to select it using the PR
+ / - button during normal TV viewing.
• If you wish to select a skipped programme, directly
enter the programme number with the NUMBER
buttons or select it in the programme edit or EPG.
Release the skipped programme.
Selecting favourite programme
1
FAV
34
• When a programme number is skipped, it means
Select your favourite programme number.
• It will automatically include the selected
programme into your favourite programme list.
WATCHING TV /PROGRAMME CONTROL
IN TV MODE
This function enables you to delete or skip the stored programmes.
You can also move some channels to other programme numbers.
A
Auto Sort
1
GREEN
Start Auto Sort.
• After activating Auto Sort once, you can no longer
edit programmes.
Deleting a programme
A
1
Select a programme number to be deleted.
• The selected programme is deleted, all the fol-
lowing programmes are shifted up one
2
RED
Turn the deleted programme number to red.
RED
Release the deleted programme.
3
A
Moving a programme
1
Select a programme number to be moved.
2
Turn the moved programme number to YELLOW.
YELLOW
3
YELLOW
A
Release the moved programme.
Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE
Turn the skipped programme number to blue.
3
BLUE
A
• When a programme number is skipped it means
that you will be unable to select it using the
PR + / - button during normal TV viewing.
• If you wish to select a skipped programme, directly
enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
Release the skipped programme.
Selecting a Favourite Programme
1
FAV
Select your favourite programme number.
• The selected programme will be added to the
favourite programme list.
35
WATCHING TV /PROGRAMME CONTROL
SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
SETUP
1MENU
Move
SETUP
OK
Move
Auto tuning
Manual tuning
Programme Edit
S o f t w a rUpdate
e U p d a: tOn
e : On
Software
Auto tuning
Manual tuning
Programme Edit
S o f t w a rUpdate
e U p d a: tOn
e : OO
n ff
Software
Diagnostics
CI Information
Diagnostics
CI Information
3
Select S E T U P.
Select S o f t w a r e U p d a t e.
On
On
Select O n or O f f.
• If you select On, a user
confirm message box will be
displayed to notify that new
software is found.
OK
2
OK
OK
4
OK
Save.
* When setting “Software Update”
Occasionally, a transmission of
updated digital software information will result in the following
menu on the TV screen.
Select the Y E S using the F G
button and when you see the
following picture.
After Software Update is completed, the System takes about
one minute to restart.
- During Progress of a Software Update, please note the following:
• Power to the set must not be interrupted.
• The set must not be switched off.
• The antenna must not be disconnected.
• After Software Update, you can confirm the updated software version in Diagnostics menu.
36
WATCHING TV /PROGRAMME CONTROL
DIAGNOSTICS (IN DIGITAL MODE ONLY)
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software
Version.
This displays the information and signal strength of the tuned MUX.
This displays the signal information and service name of the selected MUX.
SETUP
Move
Engineering Diagnostics
OK
Manufacturer
Model/Type
Serial No.
Software Version
Auto tuning
Manual tuning
Programme Edit
Software Update : On
Diagnostics
Diagnostics
: LG Electronics Inc.
: M2262D-PZ
:
: V1.10.0
D
CH 30
CH 34
CH 36
CI Information
CH 38
CH 54
CH 60
E
RETURN Prev.
1MENU
Popup
MENU Exit
Select S E T U P.
2
OK
Select D i a g n o s t i c s.
OK
Display Manufacturer, Model/Type, Serial Number and Software Version.
3
4
OK
Display the Channel information.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
37
WATCHING TV /PROGRAMME CONTROL
CI [COMMON INTERFACE] INFORMATION
This function enables you to watch some encrypted services (paid services). If you remove the CI Module, you
cannot watch paid services.
When the module is inserted into the CI slot, you can access the module menu.
To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module
from the set. This may cause a malfunction. When the set is turned on after inserting a CI Module, you may not
have any sound output.
This may be incompatible with the CI module and smart card.
CI (Common Interface) functions may not be possible depending upon the country broadcasting circumstances.
SETUP
Move
Viaccess Module
OK
Consultations
Auto tuning
Manual tuning
Programme Edit
Software Update : On
Diagnostics
C IInformation
Information
CI
Authorizations
Module information
Select the item
• This OSD is only for illustration and the menu options and
screen format will vary according to the Digital pay services
provider.
• It is possible for you to change CI (Common Interface)
menu screen and service by consulting your dealer.
1MENU
Select S E T U P.
2
OK
3
OK
4
OK
Select C I I n f o r m a t i o n.
Select the desired item: Module information, smart card information, language,
or software download, etc.
Save.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
38
WATCHING TV /PROGRAMME CONTROL
SELECTING THE PROGRAMME TABLE
You can check which programmes are stored in the memory by displaying the programme table.
Displayed in the
Locked Programme.
A
Displaying programme LIST
• You may find some blue programmes. These
1
LIST
A
Selecting a programme in the programme list
1
From the programme you are currently watching, the mode will
change from TV to DTV to Radio.
Switch to the chosen programme number.
OK
Paging through a programme list
1
PR
A
TV/RADIO
Select a programme.
2
A
have been set up to be skipped by auto
programming or in the programme edit mode.
• Some programmes with the channel number
shown in the programme LIST indicate there is
no station name assigned.
Display the PROGRAMME LIST.
Turns the pages.
2
LIST
Returns to normal TV viewing.
Displaying the favourite programme table
1
FAV
Display the Favourite Programme table.
39
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help navigate through all the possible viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In
addition, detailed information about the programme is often available in the EPG (the availability and amount of
these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcasted by broadcasting companies.
The EPG displays the programme description for the next eight days.
Switch on/off EPG
Programme Guide
1 YLE TV1
1 GUIDE
ALL
Switch on or off EPG.
1
2
4
5
6
8
06 Mar. 2006 15:09
D
06 Mar.
14:00
15:00
YLE TV1
No Information
Kungskonsumente
YLE TV2
No Information
TV2: Farmen No Information
TV..
No Information
YLE FST
No Information
No Information
CNN
... ... No Information ... ...
Tänään otsikoissa
YLE24
E
TV/RADIO Radio
Mode
Select a programme
1
or
PR
Select desired programme.
2
OK
40
Display the selected programme.
FAV Favourite
Date
INFO
Inforrmation
Schedule
Pr. Change
Schedule List
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
Button Function in NOW/NEXT Guide Mode
RED
YELLO
YELLOW
Enter Timer Record/Remind setting
mode.
BLUE
Enter Timer Record/Remind list mode.
OK
Select the Broadcast Programme.
Change EPG mode.
Change to the selected programme.
Select NOW or NEXT Programme.
PR
GUIDE
TV/RADIO
INFO i
Page Up/Down.
EXIT
or
Switch off EPG.
Select TV or RADIO Programme.
The detail information on or off.
Button Function in 8 Day Guide Mode
RED
GREEN
Change EPG mode.
Enter Date setting mode.
Select the Broadcast Programme.
PR
YELLO
YELLOW
Enter Timer Record/Remind setting
mode.
GUIDE
BLUE
Enter Timer Record/Remind list mode.
TV/RADIO
OK
Change to the selected programme.
Page Up/Down.
or
EXIT
Switch off EPG.
Select TV or RADIO Programme.
INFO i
The detailed information on or off.
Select NOW or NEXT Programme.
Button Function in Date Change Mode
GREEN
Switch off Date setting mode.
OK
Change to the selected date.
Switch off Date setting mode.
GUIDE
or
EXIT
Switch off EPG.
Select a date.
41
EPG (ELECTRONIC PROGRAMME GUIDE)
(IN DIGITAL MODE)
Button Function in Extended Description Box
Text Up/Down.
YELLO
YELLOW
Enter Timer Record/Remind setting
mode.
INFO i
GUIDE
The detailed information on or off.
or
EXIT
Switch off EPG.
Button Function in Record/Remind Setting Mode
- This function is available only when recording equipment that uses 8 pin recording signalling has
been connected to the DTV-OUT terminal, using a SCART cable.
YELLO
YELLOW
OK
Change to Guide or Timer list mode.
Select Type, Service, Date or Start/End
time.
Save Timer Record/Remind.
Function setting.
Button Function in Schedule List Mode
YELLO
YELLOW
GREEN
RED
42
Add new Manual Timer setting mode.
Enter Schedule list editing mode.
Delete the selected item.
BLUE
Change to Guide mode.
Select Schedule list.
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan, Original, 4:3, 14:9 and Zoom, Cinema
Zoom, Full Wide.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen
and remain visible.
You can adjust the enlarge proportion using
D E
button.
This function works in the following signal.
• You can also adjust A s p e c t R a t i o in the
RATIO OSD.
• For Zoom Setting, select 1 4 : 9, Z o o m
and C i n e m a Z o o m in Ratio OSD.
• 16:9
The following selection will allow you to
adjust the picture horizontally, in linear
proportion, to fill the entire screen (useful for
viewing 4:3 formatted DVDs).
• 4:3
The following selection will allow you to view
a picture with an original 4:3 aspect ratio,
grey bars will appear on both the left and
right of the screen.
43
PICTURE CONTROL
• Original
When your TV receives a wide screen signal, it
will automatically change to the picture
format broadcast.
• Cinema Zoom
Choose Cinema Zoom when you wish the picture to be altered, both horizontally extended
and vertically cropped. The picture adopting
a compromise between alteration and screen
coverage.
Original
• 14:9
You can view a picture format of 14:9 or a
general TV programme in the 14:9 mode. The
14:9 screen is viewed in the same way as in
4:3, but is magnified to the left and right.
• Just Scan
The following Selection allows you to view the
picture in the best quality without loss of
original picture in high resolution image.
Note: If there is interference in original picture, you can view interference at the edge.
Just Scan
• Zoom
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and
bottom of the picture will be cropped.
• Full Wide
When TV receives the wide screen signal,it will
lead you to adjust the picture horizontally or
vertically, in a linear proportion,to fill the entire
screen fully.
Full Wide
! NOTE
G
G
G
G
44
You can only select 16:9 (Wide), 4:3, 14:9, Zoom, Cinema Zoom in Component (under 720p) mode.
You can only select 4:3, 16:9 (Wide) in RGB/DVI mode only.
In HDMI/Component (over 720p) mode, Just Scan is available.
You can only select Original in UK digital teletext (MHEG-5).
PICTURE CONTROL
AUTO BRIGHT
When ON is selected, this function adjusts the screen brightness automatically, depending on the surrounding
environment, to provide optimal viewing conditions.
When OFF is selected, this function is turned off.
PICTURE
Move
OK
Aspect Ratio : 16:9
Aspect Ratio : 16:9
Auto Bright : Off
Auto Bright : Off
Picture Mode : Vivid
Picture Mode : Vivid
Move
• Backlight 100
• Contrast 100
• Contrast 100
• Brightness 50
• Brightness 50
• Sharpness 70
• Sharpness 70
• Colour
• Colour
60
OK
Off
Off
On
• Backlight 100
E
1MENU
PICTURE
60
E
Select P I C T U R E.
2
OK
Select A u t o B r i g h t .
OK
Select O n or O f f.
3
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
45
PICTURE CONTROL
PRESET PICTURE SETTINGS
Picture Mode-Preset
PICTURE
Move
OK
Aspect Ratio : 16:9
Auto Bright : Off
Picture Mode : Standard
• Backlight 100
• Contrast 100
PICTURE
Move
OK
Aspect Ratio : 16:9
Auto Bright : Off
• Brightness 50
• Sharpness
8
• Colour
50
Standard
Standard
sRGB
Cinema
Sport
Game
Expert 1
Expert 2
E
Picture Mode : Vivid
<RGB,DVI Mode>
• Backlight 100
• Contrast 100
PICTURE
• Brightness 50
OK
Aspect Ratio : 16:9
• Sharpness 70
• Colour
Move
Auto Bright : Off
60
Picture Mode : Vivid
E
• Backlight 100
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour
60
Vivid
Vivid
Standard
Cinema
Sport
Game
Expert 1
Expert 2
E
<Other mode>
1MENU
• Picture Mode adjusts the set for the best pic-
Select P I C T U R E.
ture appearance. Select the preset value in the
Picture Mode menu based on the programme
category.
2
OK
Select P i c t u r e M o d e.
OK
Select desired picture value.
3
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
46
PICTURE CONTROL
Auto Colour Tone Control (Warm/Medium/Cool)
Choose one of three automatic colour adjustments. Set to warm to enhance warm colours such as red, or set to
cool to see less intense colours with more blue.
PICTURE
Move
PICTURE
OK
D
• Backlight 100
• Backlight 100
• Contrast 100
• Contrast 100
• Brightness 50
• Brightness 50
• Sharpness 70
• Sharpness 70
• Colour
60
• Tint
1MENU
Move
OK
D
0
• Colour
R
0
F
Dynamic Contrast
60
• Tint
G
Colour Temperature
R
• Advanced Control
• Advanced Control
• Picture Reset
• Picture Reset
Medium
G
High
Dynamic Colour
High
Noise Reduction
Medium
Gamma
Medium
G
Black Level
Auto
Film Mode
Off
Close
Select P I C T U R E.
2
OK
Select A d v a n c e d C o n t r o l.
OK
Select C o l o u r T e m p e r a t u r e.
3
4
Select either C o o l, M e d i u m or W a r m.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
47
PICTURE CONTROL
Auto Colour Tone Control (6500K/9300K)
(RGB,DVI mode only)
Advanced control menu is inactivated when picture mode is sRGB.
Choose one of two automatic colour adjustments.
PICTURE
Move
OK
PICTURE
D
Move
OK
D
• Backlight 100
• Backlight 100
• Contrast 100
• Contrast 100
• Brightness 50
• Brightness 50
Colour Temperature
Dynamic Contrast
• Sharpness
• Sharpness
8
Dynamic Colour
50
Noise Reduction
• Colour
8
50
• Tint
0
• Colour
R
G
• Tint
0
R
Advanced Control
Control
•• Advanced
Advanced Control
Control
•• Advanced
• Picture Reset
• Picture Reset
E
Gamma
F
6500K
G
Off
Off
Off
Medium
G
Black Level
Auto
Film Mode
Off
E
Close
1MENU
Select P I C T U R E.
2
OK
Select A d v a n c e d C o n t r ol.
OK
Select C o l o u r T e m p e r a t u r e.
3
4
Select either 6 5 0 0 K, 9 3 0 0 K.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
48
PICTURE CONTROL
MANUAL PICTURE ADJUSTMENT
Picture Mode-User option
PICTURE
Move
OK
Aspect Ratio : 16:9
Standard (User)
Standard
sRGB
Picture Mode : Standard (User)
Cinema
• Backlight 100
Sport
• Contrast 100
Game
• Brightness 50
Expert 1
• Sharpness 8
Expert 2
• Colour
50
Auto Bright : Off
PICTURE
Move
OK
Aspect Ratio : 16:9
Auto Bright : Off
E
Picture Mode : Vivid (User)
<RGB,DVI Mode>
• Backlight 100
• Contrast 100
PICTURE
• Brightness 50
OK
Aspect Ratio : 16:9
• Sharpness 70
• Colour
Move
Auto Bright : Off
60
Picture Mode : Vivid (User)
E
• Backlight 100
• Contrast 100
• Brightness 50
• Sharpness 70
• Colour
60
Vivid (User)
Vivid
Standard
Cinema
Sport
Game
Expert 1
Expert 2
E
<Other mode>
1MENU
Select P I C T U R E.
2
OK
Select P i c t u r e M o d e.
OK
Select desired picture value.
OK
Select C o n t r a s t, B r i g h t n e s s, S h a r p n e s s, C o l o u r or T i n t.
OK
Make appropriate adjustments.
3
4
5
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
! NOTE
G
You cannot adjust colour and tint in the RGB, DVI mode.
49
PICTURE CONTROL
PICTURE IMPROVEMENT TECHNOLOGY
Dynamic Contrast
Optimizes the contrast automatically according to the brightness of the reflection.
Dynamic Colour
Adjusts the colour of the reflection automatically to reproduce natural colurs as close as possible.
Noise Reduction
Removes interference up to the point where it does not damage the original picture.
Gamma
High gamma values display whitish images and low gamma values display high contrast images.
PICTURE
Move
PICTURE
OK
D
• Backlight 100
• Backlight 100
• Contrast 100
• Contrast 100
• Brightness 50
• Brightness 50
• Sharpness 70
• Colour
60
• Tint
1MENU
Move
OK
D
0
R
Dynamic Contrast
Medium
F
High
G
Dynamic Colour
• Sharpness 70
High
Noise Reduction
Medium
• Colour
Gamma
Medium
60
• Tint
G
Colour Temperature
0
R
Advanced Control
Control
•• Advanced
• Advanced Control
• Picture Reset
• Picture Reset
G
Black Level
Auto
Film Mode
Off
Close
Select P I C T U R E.
2
OK
Select A d v a n c e d C o n t r o l.
OK
Select D y n a m i c C o n t r a s t, D y n a m i c C o l o u r, N o i s e R e d u c t i o n or G a m m a.
3
4
Select your desired Source.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
50
PICTURE CONTROL
ADVANCED - BLACK (DARKNESS) LEVEL
When you view a film, this function adjusts the set to the best picture quality.
This function works in the following mode: AV (NTSC-M), HDMI or Component.
PICTURE
Move
PICTURE
OK
D
Move
OK
D
• Backlight 100
• Backlight 100
• Contrast 100
• Contrast 100
Colour Temperature
Medium
• Brightness 50
• Brightness 50
Dynamic Contrast
High
• Sharpness 70
• Sharpness 70
Dynamic Colour
High
• Colour
• Colour
Noise Reduction
Medium
60
• Tint
0
R
60
• Tint
G
• Advanced Control
0
R
• Advanced Control
• Picture Reset
• Picture Reset
Gamma
Medium
G
Black Level
F
Film Mode
High
G
Off
Close
1MENU
• L o w : The reflection of the screen gets darker.
• H i g h : The reflection of the screen gets brighter.
Select P I C T U R E.
2
OK
Select A d v a n c e d C o n t r o l.
OK
Select B l a c k L e v e l.
3
4
Select L o w or H i g h.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
! NOTE
G
G
G
If input is not AV(NTSC-M), HDMI or component, this function set to auto.
In case of auto, user can’t adjust it directly.
Auto: Realizing the black level of the screen and set it to High or Low automatically.
51
PICTURE CONTROL
ADVANCED - FILM MODE
To set the product up for the best picture quality for viewing films.
This feature operates only in TV, AV and Component 480i/576i/1080i mode.
PICTURE
Move
OK
PICTURE
D
• Backlight 100
• Backlight 100
• Contrast 100
• Contrast 100
• Brightness 50
• Brightness 50
• Sharpness 70
• Sharpness 70
• Colour
60
• Tint
1MENU
Move
OK
D
0
• Colour
R
G
60
• Tint
0
R
• Advanced Control
• Advanced Control
• Picture Reset
• Picture Reset
Colour Temperature
Medium
Dynamic Contrast
High
Dynamic Colour
High
Noise Reduction
Medium
Gamma
Medium
G
Black Level
Film Mode
Auto
F
Off
G
Close
Select P I C T U R E.
2
OK
Select A d v a n c e d C o n t r o l.
OK
Select F i l m M o d e.
3
4
Select O n or O f f.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
52
PICTURE CONTROL
Expert Picture Control
By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit,
offering the optimal picture quality for users.
As the detail item for video quality experts to fine tune the video using specific videos, this may not be effective for general videos.
PICTURE
Move
PICTURE
OK
Move
OK
D
Aspect Ratio : 16:9
• Contrast
Auto Bright : Off
Picture Mode : Expert 1
• Backlight
• Contrast
20
80
• Brightness 50
• H Sharpness50
• V Sharpness50
Vivid
Standard
Cinema
Sport
Game
Expert 11
Expert
80
Dynamic Contrast
• Brightness 50
Noise Reduction
• H Sharpness50
Gamma
• V Sharpness50
Black Level
Auto
• Colour
Film Mode
Off
Colour Standard
G
SD
60
• Tint
0
• Expert Control
Expert 2
• Picture Reset
E
R
F
Off
G
Off
Medium
White Balance
Warm
• Pattern
Outer
E
Close
1MENU
Select P I C T U R E.
2
OK
Select P i c t u r e M o d e.
3
OK
Select E x p e r t 1 or E x p e r t 2.
OK
Select E x p e r t C o n t r o l.
OK
Select your desired Source.
4
5
6
Make appropriate adjustments.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
53
PICTURE CONTROL
■
Adjusts the contrast to keep it at the best level according to the brightness
of the screen. The resolution of gradation is improved by making bright
parts brighter and dark parts darker. This feature refers to dynamic contrast,
and enhances the feeling of presence that contrast controls are intended to
give by using dimming and other input signals.
■
Reduces screen noise without compromising video quality. This feature
is also used to reduce recursive noise and MPEG noise
(Mosquito/Block).
■
You can adjust brightness of dark area and middle gray level area of the
picture.
• Low : Make dark and middle gray level area of the picture brighten.
• Medium: Express original picture gradation.
• High: Make dark and middle gray level area of the picture darken.
Dynamic Contrast
(Off/Low/High)
Noise Reduction
(Off/Low/Medium/High)
Gamma
(Low/Medium/High)
• Low :The reflection of the screen gets darker.
Black Level
(Low/High)
Film Mode
(On/Off)
• High: The reflection of the screen gets brighter.
• Auto : Realizing the black level of the screen and set it to High or Low
automatically.
■ Makes dark parts on the screen look darker.
Set black level of the screen to proper level.
This function works in the following mode: AV (NTSC-M), HDMI or
Component .
This function enables to select “Low” or “High” in the following
mode : AV(NTSC-M), HDMI or Component. Otherwise, “Black level”
is set to “Auto”.
■
Makes video clips recorded in film look more natural.
This feature operates only in TV, AV and Component
480i/576i/1080i mode.
Select the international standard for the colour gamut that will be
applied when the colour gamut is set to Standard.
• SD: Increase colour accuracy by adjusting the output image to meet
the EBU (European Broadcasting Union) Colour Coordinate
Standard.
• HD: Increase colour accuracy by adjusting the output image to meet
ITU.BT-709 (High Definition Signal International Colour Coordinate
Standard).
■
Colour Standard
(SD/HD)
White Balance (Medium/Warm/Cool)
• Adjust white balance.
■
Pattern (Inner/Outer)
• Decide whether to use the Inner Pattern or External Pattern when
adjusting white balance.
■
White Balance
(Medium/Warm/Cool)
Red Gain/Green Gain/Blue Gain
• Adjust high-level white balance.
■
Red Offset/Green Offset/Blue Offset
• Adjust low-level white balance.
■
Colour (Red/Green/Blue/Yellow/Cyan/Magenta)
• Adjust colour saturation by area.
■ Tint (Red/Green/Blue/Yellow/Cyan/Magenta)
• Adjust colour tint by area.
■
Colour Management System
54
PICTURE CONTROL
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
PICTURE
Move
PICTURE
OK
D
• Backlight 100
• Backlight 100
• Contrast 100
• Contrast 100
• Brightness 50
• Brightness 50
• Sharpness 70
• Sharpness 70
• Colour
60
• Tint
1MENU
Move
OK
D
0
• Colour
R
60
• Tint
G
0
R
• Advanced Control
• Advanced Control
• Picture Reset
• Picture Reset
G
i
Resetting video configuration...
Select P I C T U R E.
2
OK
3
OK
Select P i c t u r e R e s e t.
Initialize the adjusted value.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
55
PICTURE CONTROL
SCREEN SETUP FOR PC MODE
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC] mode.
<M1962D>
<Vertical resolution : 768>
SCREEN
Resolution
Move
G
Auto Config.
Position
PICTURE
Move
RETURN Prev.
1024 x 768
1280 x 768
1360 x 768
1366 x 768
<M2062D/M2262D/M2362D/M2762D>
<Vertical resolution : 768>
SCREEN
Resolution
G
Auto Config.
Position
RETURN Prev.
1024 x 768
1280 x 768
1360 x 768
1366 x 768
OK
Size
Size
• Brightness 50
Phase
Phase
• Sharpness
8
Reset
Reset
• Colour
50
• Tint
0
D
• Contrast
Move
100
R
G
• Advanced Control
<M2262D/M2362D/M2762D>
<Vertical resolution : 1050>
<M2062D/M2262D/M2362D/M2762D>
<Vertical resolution : 900>
• Picture Reset
SCREEN
Screen
Resolution
Auto Config.
1MENU
Move
G
RETURN Prev.
1400 x 1050
1680 x 1050
SCREEN
Resolution
Auto Config.
Position
Position
Size
Size
Phase
Phase
Reset
Reset
Move
G
RETURN Prev.
1280 x 960
1400 x 900
1600 x 900
Select P I C T U R E.
2
OK
Select S C R E E N.
OK
Select R e s o l u t i o n.
3
4
Select the desired resolution.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
56
PICTURE CONTROL
Auto Configure (RGB [PC] mode only)
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not
correct, your set is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be
unstable for a few seconds while the auto configuration is in progress.
1. Using OSD
PICTURE
Move
D
• Contrast
OK
100
SCREEN
Move
RETURN Prev.
Resolution
• Brightness 50
• Sharpness
8
• Colour
50
• Tint
0
Auto Config.
Position
R
G
Size
• Advanced Control
To Set
Yes
No
Phase
• Picture Reset
Reset
Screen
1MENU
G
Select P I C T U R E.
• If the position of the image is still not correct,
try Auto adjustment again.
2
• If picture needs to be adjusted again after Auto
OK
Select S C R E E N.
OK
Select A u t o C o n f i g.
OK
Select Y e s.
adjustment in RGB (PC), you can adjust the
P o s i t i o n, S i z e or P h a s e.
3
4
5
OK
Run Auto Config.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
57
PICTURE CONTROL
2. Using OK(Remocon or control key)
This function is available for RGB signals only.
1
OK
Press OK.
Auto Config. G
(OK)
• If you don’t want Auto Configure, do
not press
OK
<M1962D>
2
OK
Press OK.
Auto in progress
<1360 x 768 Resolution>
Auto in progress
For optimal display
change resolution 1360 x 768
<Others Resolution>
<M2062D>
2
OK
Press OK.
Auto in progress
<1600 x 900 Resolution>
Auto in progress
For optimal display
change resolution 1600 x 900
<Others Resolution>
<M2262D/M2362D/M2762D>
2
OK
Press OK.
Auto in progress
<1920 x 1080 Resolution>
Auto in progress
For optimal display
change resolution 1920 x 1080
<Others Resolution>
58
PICTURE CONTROL
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still shaky, adjust the picture
phase manually.
This function works in the following mode: RGB[PC].
PICTURE
Move
D
• Contrast
OK
SCREEN
100
Resolution
• Brightness 50
• Sharpness
8
Auto Config.
• Colour
50
Position
• Tint
0
D
R
G
F
G
E
G
Size
• Advanced Control
Phase
• Picture Reset
Screen
1MENU
RETURN Prev.
Move
Reset
Select P I C T U R E.
2
OK
Select S C R E E N.
OK
Select P o s i t i o n, S i z e or P h a s e.
3
4
Make appropriate adjustments.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
59
PICTURE CONTROL
Screen Reset
Returns Position, Size and Phase to the default factory settings.
This function works in the following mode: RGB[PC].
PICTURE
Move
D
• Contrast
OK
100
8
• Colour
50
• Tint
0
RETURN Prev.
Auto Config.
To Set
Position
R
G
• Advanced Control
• Picture Reset
Screen
1MENU
Move
Resolution
• Brightness 50
• Sharpness
SCREEN
Size
Phase
Reset
G
Select P I C T U R E.
2
OK
Select S C R E E N.
OK
Select R e s e t.
OK
Select Y e s .
3
4
5
OK
Run Reset.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
60
SOUND CONTROL
AUTO VOLUME LEVELER
AVL automatically remains on the same volume level if you change programmes.
AUDIO
Move
OK
AutoVolume
Volume : :Off
Off
Auto
Clear Voice II : Off
Move
AutoVolume
Volume : :Off
Off
Auto
Off
Off
On
Clear Voice II : Off
• Level
Balance
3
-
+
0
L
R
Sound Mode : Standard
• Level
Balance
OK
3
-
+
0
L
R
Sound Mode : Standard
• SRS TruSurround HD : Off
• SRS TruSurround HD : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1MENU
AUDIO
E
Select A U D I O.
2
OK
Select A u t o V o l u m e.
OK
Select O n or O f f.
3
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
61
SOUND CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Move
OK
Auto Volume : Off
Move
OK
Auto Volume : Off
ClearVoice
VoiceIIII : :Off
Off
Clear
ClearVoice
VoiceIIII : :Off
Off
Clear
• Level
Balance
3
-
+
0
L
R
Sound Mode : Standard
• Level
Balance
3
-
0
L
Off
Off
On
+
R
Sound Mode : Standard
• SRS TruSurround HD : Off
• SRS TruSurround HD : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1MENU
AUDIO
E
Select A U D I O.
• Select levels from ‘-6’ to ’+6’.
2
OK
Select C l e a r V o i c e I I
OK
Select O n or O f f.
3
When the C l e a r V o i c e I I is selected O n,
4
OK
Select the desired L e v e l.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
62
SOUND CONTROL
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Move
AUDIO
OK
Auto Volume : Off
OK
Auto Volume : Off
Clear Voice II : Off
Clear Voice II : Off
• Level
Balance
Balance
3
-
+
0
L
R
• Level
Balance
Balance
Sound Mode : Standard
3
-
0
L
+
• Balance
0
R
F
L
R
G
Close
Sound Mode : Standard
• SRS TruSurround HD : Off
• SRS TruSurround HD : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1MENU
Move
E
Select A U D I O.
2
OK
Select B a l a n c e.
OK
Make desired adjustment.
3
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
63
SOUND CONTROL
PRESET SOUND SETTINGS - SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport and Game and you can also adjust
the frequency of the equalizer.
Sound Mode lets you enjoy the best sound without any Special adjustment as the set the appropriate sound
options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
AUDIO
Move
AUDIO
OK
Auto Volume : Off
OK
Auto Volume : Off
Clear Voice II : Off
Clear Voice II : Off
• Level
Balance
3
-
+
0
L
R
• Level
Balance
3
-
0
L
+
S t aRn d a r d
Standard
Sound
S o u n dMode
M o d e: Standard
: Standard
Music
• SRS TruSurround HD : Cinema
Off
Sound
S o u n dMode
M o d e: Standard
: Standard
• SRS TruSurround HD : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
E
1MENU
Move
Sport
Game
E
Select A U D I O.
2
OK
Select S o u n d M o d e.
OK
Select S t a n d a r d, M u s i c, C i n e m a, S p o r t or G a m e.
3
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
64
SOUND CONTROL
SOUND SETTING ADJUSTMENT - USER MODE
Adjusting the audio equalizer.
AUDIO
Move
AUDIO
OK
Auto Volume : Off
OK
Auto Volume : Off
Clear Voice II : Off
Clear Voice II : Off
• Level
Balance
3
-
+
0
L
R
• Level
50
• Bass
50
-
+
R
0 L
Standard(User)
Standard(User)
Sound
S o u n dMode
M o d e: Standard
: Standard(User)
Music
• SRS TruSurround HD : Off
Cinema
• Treble 50
Sport
• Bass
50 Game
E
• SRS TruSurround HD : Off
• Treble
3
Balance
Sound
S o u n dMode
M o d e: Standard
: Standard(User)
E
1MENU
Move
4
Select A U D I O.
2
OK
Select a T r e b l e, B a s s.
OK
Set the desired sound level.
5
OK
Select S o u n d M o d e.
OK
Select S t a n d a r d, M u s i c, C i n e m a, S p o r t or G a m e.
3
SRS TRUSURROUND HD
Select this option to sound realistic.
1MENU
2
• S R S T r u S u r r o u n d H D : TruSurround HD is a
Select A U D I O.
OK
Select S R S T r u S u r r o u n d H D.
OK
Select O n or O f f.
5
patented SRS technology that solves the problem
of playing 5.1 multicannel content over two
speakers.
• When SRS TruSurround HD is ‘On’. Treble, Bass
figure is fixed to 50 and deactivated.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
G
G
is a trademark of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
65
SOUND CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
OK
AUDIO
Move
D
Balance
0
L
R
Sound Mode : Standard
Balance
0
OK
L
• SRS TruSurround HD : Off
• SRS TruSurround HD : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
Digital Audio Out
TV Speaker
R
Sound Mode : Standard
• Reset
Reset
• Reset
Reset
: PCM
Digital Audio Out
: On
TV Speaker
E
1MENU
D
Resetting sound mode configuration...
: PCM
i
: On
E
Select A U D I O.
2
OK
Select R e s e t.
3
OK
Initialize the adjusted value.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
66
SOUND CONTROL
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio.
When Dolby digital is available, selecting Dolby Digital in the Digital Audio Out menu will set SPDIF output to
Dolby Digital
If Dolby Digital is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be
PCM.
Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital Audio,
only Dolby Digital will be played.
AUDIO
Move
AUDIO
OK
Move
D
Balance
0
L
Balance
R
Sound Mode : Standard
2
L
R
• SRS TruSurround HD : Off
• SRS TruSurround HD : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
D i g i t aAudio
l A u dOut
io Out
Digital
TV Speaker
:: PCM
PCM
• Reset
D i g i t aAudio
l A u dOut
io Out
Digital
:: PCM
PCM
: On
TV Speaker
: On
Auto
PCM
PCM
E
Select A U D I O.
OK
Select D i g i t a l A u d i o O u t.
OK
Select A u t o or P C M.
3
0
Sound Mode : Standard
E
1MENU
OK
D
Manufactured under license from
Dolby Laboratories. “Dolby “and
the double-D symbol are trademarks of Dolby Laboratories.
• There is a possibility that when HDMI mode,
some DVD players do not make SPDIF sound.
At that time, set the output of the digital
audio of the DVD player to PCM.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
67
SOUND CONTROL
TV SPEAKERS ON/ OFF SETUP
You can adjust the internal speaker status.
In TV, AV, COMPONENT, HDMI, RGB, DVI mode the TV speaker can be operational even though when there is
no video signal.
If you wish to use an external Hi-Fi system, turn off the TV internal speakers.
AUDIO
Move
AUDIO
OK
Move
D
Balance
0
Balance
R
Sound Mode : Standard
0
L
R
Sound Mode : Standard
• SRS TruSurround HD : Off
• SRS TruSurround HD : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
Digital Audio Out
: PCM
Digital Audio Out
: PCM
T VSpeaker
Speaker
TV
On
: :On
T VSpeaker
Speaker
TV
On
: :On
E
1MENU
OK
D
L
E
Off
On
On
Select A U D I O.
2
OK
Select T V S p e a k e r.
OK
Select O n or O f f.
3
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
68
SOUND CONTROL
AUDIO DESCRIPTION(IN DIGITAL MODE ONLY)
This function is for the blind, and provides explanatory audio describing the current situation in a TV programme
in addition to the basic audio.
When Audio Description On is selected, basic audio + Audio Description are provided only for those programmes
that have Audio Description included.
AUDIO
Move
AUDIO
OK
Move
D
• SRS TruSurround HD : Off
• SRS TruSurround HD : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
• Reset
• Reset
Digital Audio Out
: PCM
Digital Audio Out
: PCM
TV Speaker
: On
TV Speaker
: On
Audio Description
Description
Audio
On
:: On
Audio Description
Description
Audio
On Off
:: On
On
• Volume 50 On
• Volume 50
1MENU
OK
D
Select A U D I O.
2
OK
Select A u d i o D e s c r i p t i o n.
OK
Select O n or O f f.
3
When the A u d i o D e s c r i p t i o n is selected O n,
4
OK
Select the desired V o l u m e.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
69
SOUND CONTROL
I/II
Stereo/Dual Reception (In Analogue Mode Only)
When a programme is selected, the sound information for the station appears after the programme number and
station name disappear.
I/II
Select the sound output.
On Screen Display
MONO
Stereo
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
A
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound
is improved.
A
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL
I+II.
DUAL I
DUAL II
DUAL I+II
70
Broadcast
Mono
Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
SOUND CONTROL
NICAM Reception (In Analogue Mode Only)
If the set is equipped with the receiver for NICAM reception, high quality NICAM (Near
Instantaneous Companded Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of received broadcast as follows by pressing
the I/II button repeatedly.
1
When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O.
2
When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O.
If the stereo signal is weak, switch to F M m o n o.
3
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or
N I C A M D U A L I + I I or M O N O.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI, DVI mode, you can select output sound for the left and right loudspeakers.
Repeatedly press the I / I I button to select the sound output.
L + R : Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R
input is sent to the right loud speaker.
L + L : Audio signal from audio L input is sent to left and right loud speakers.
R + R : Audio signal from audio R input is sent to left and right loud speakers.
71
TIME SETTING
CLOCK SETUP
The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the set has no
DTV signal.)
You must set the time correctly before using on/off timer function.
TIME
Move
Clock
Clock
Off Time
On Time
Sleep Timer
Auto Off
TIME
OK
Clock
Clock
Off Time
On Time
Sleep Timer
Auto Off
: Off
: Off
: Off
: On
Move
: Off
: Off
: Off
: On
OK
Date
01
Month
Jan.
Year
2008
Hour
00
Minute
00
Time Zone
London
GMT
Close
1MENU
Select T I M E.
2
OK
Select C l o c k.
OK
Select either the year, date, or time option.
3
4
Set the year, date, and time options.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
72
TIME SETTING
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the set to standby at a preset time.
Two hours after the set is switched on by the on time function it will automatically switch back to standby mode
unless a button has been pressed.
The Off time function overrides the On timer function if both are set to the same time.
The set must be in standby mode for the On timer to work.
TIME
Clock
Off Time
Onn Time
O
Time
Sleep Timer
Auto Off
Move
TIME
OK
Clock
Off Time
Onn Time
O
Time
Sleep Timer
Auto Off
: Off
: Off
Off
: Off
: On
Move
: Off
: Off
Off
: Off
: On
OK
1/Jan. 2008 00:01
Repeat
F
Off
Hour
00
Minute
00
Mode
DTV
Programme
800
Volume
30
G
Close
1MENU
• To cancel On/Off Time function, select Off.
• For On Time function only
Select T I M E.
1
2
OK
OK
2
3
OK
Select M o d e.
Select O f f t i m e or O n t i m e.
Select R e p e a t.
Select T V, D T V or R a d i o.
3
4
Set the programme.
Select O f f, O n c e, D a i l y, M o n ~ F r i,
M o n ~ S a t, S a t ~ S u n or S u n.
5
4
Adjust volume level at
switch-on.
Set the h o u r.
6
Set the m i n u t e s.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
73
TIME SETTING
AUTO SHUT-OFF SETTING
If the set is switched on and there is no input signal, it will switch off automatically after 10 minutes.
TIME
Move
Clock
Off Time
On Time
Sleep Timer
AAuto
u t o Off
Off
1MENU
OK
: Off
: Off
: Off
: :On
On
TIME
Clock
Off Time
On Time
Sleep Timer
AAuto
u t o Off
Off
Move
: Off
: Off
: Off
: :On
On
OK
Off
On
On
Select T I M E.
2
OK
Select A u t o O f f.
OK
Select O f f or O n.
3
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
74
TIME SETTING
TIME ZONE SETUP
When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and
GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a
digital signal.
1
MENU
Select T I M E.
2
OK
Select T i m e Z o n e.
OK
Select your viewing area time zone.
OK
Confirm it.
3
4
SLEEP TIMER SETTING
You do not have to remember to switch the set off before you go to sleep.
The sleep timer automatically switches the set off after the preset time has elapsed.
1
MENU
Select T I M E.
2
OK
Select S l e e p T i m e r.
OK
Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0 or 2 4 0 M i n .
OK
Confirm it.
3
4
• When you switch the set off, the preset sleep time is cancelled.
• You can also adjust Sleep Timer in the TIME menu.
• When entering DPM (Sleep mode), the value of sleep time setting will be canceled.
75
OPTION SETTING
ON-SCREEN MENU LANGUAGE /
COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
1
OK
Select your desired language.
OK
Select your country.
2
* If you want to change Language/ Country selection
1MENU
Select OPTION.
2
OK
Select Menu Language or Country.
OK
Select your desired language or country.
3
4
OK
Save.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
! NOTE
G
G
G
G
G
76
If you do not finish the set-up Installation Guide by pressing EXIT or if you time out on the OSD (On
Screen Display) the installation menu will continuously appear whenever the set is switched on until the
set up is completed.
If you select the wrong local country, teletext may not appear correctly on the screen and some problems
may occur during teletext operation.
The CI (Common Interface) function may not be applied based on country broadcasting circumstances.
DTV mode control buttons may not function based on country broadcasting circumstances.
In countries that Digital broadcasting regulation isn’t fixed, some DTV functions may not work depending on digital broadcasting circumstances.
OPTION SETTING
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The Audio function allows selection of a preferred language.
If audio data in a selected language is not broadcast, the default language audio will be played.
Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected
language is not broadcast, the default language subtitle will be displayed.
When the languages you selected as the primary for Audio Language and Subtitle Language are not supported, you can select language in secondary category.
1MENU
1MENU
Select O P T I O N.
2
Select A u d i o L a n g u a g e, S u b t i t l e
L a n g u a g e.
OK
3
Select your desired language.
OK
Select O P T I O N.
2
Select H a r d o f
H e a r i n g( ) .
OK
3
Select O n or O f f.
OK
4
OK
Save.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
< Audio Language Selection >
G When two or more audio languages are broadcast, you can
select the audio language.
< Subtitle Language Selection >
G When two or more subtitle languages are broadcast, you
can select the subtitle language with the SUBTITLE button
on the remote control.
G Press the D E button to select a subtitle language.
Audio Language OSD Information
Display
N.A
Status
Not Available
MPEG Audio
Dolby Digital Audio
Audio for “Visual Impaired”
Audio for “Hearing Impaired”
Subtitle Language OSD Information
Display
N.A
Status
Not Available
Teletext Subtitle
Subtitle for “Hard of Hearing”
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider.
- When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) it may output a part of the Main audio.
77
OPTION SETTING
DATA SERVICE
(This menu is enabled only in Ireland.)
This function allow users to choose between MHEG(Digital Teletext) and Teletext if both exist at the same time.
If only one of them exists,either MHEG or Teletext is enabled regardless of which option you selected.
OPTION
Move
OPTION
OK
Move
Menu Language
: English
Menu Language
: English
Audio Language
: English
Audio Language
: English
Subtitle Language : English
Hard of Hearing(
Subtitle Language : English
: Off
Hard of Hearing(
Data Service
Service
Data
MHEG
:: MHEG
Data Service
Service
Data
Country
: UK
Country
)
Input Label
)
: Off
MHEG
MHEG
MHEG
:: MHEG
: UKTeletext
Input Label
Key Lock
: Off
Key Lock
E
1MENU
OK
: Off
E
Select OPTION.
2
OK
Select D a t a S e r v i c e.
OK
Select M H E G or T e l e t e x t.
3
4
OK
Save.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
78
OPTION SETTING
INPUT LABEL
Selects a label for each input source.
OPTION
Move
OPTION
OK
Move
Menu Language
: English
Menu Language
: English
Audio Language
: English
Audio Language
: English
OK
Subtitle Language : English
Subtitle Language : English
AV1
Hard of Hearing(
: Off
Hard of Hearing(
Data Service
: MHEG
Data Service
AV3
: MHEG
Country
: UK
Country
: UKComponent
)
Input
I n p u tLabel
Label
Key Lock
Input
I n p u tLabel
Label
: Off
Key Lock
E
)
: OffAV2
RGB
HDMI 1
: Off
E
HDMI 2
DVI
Close
1MENU
Select OPTION.
2
Select I n p u t L a b e l.
OK
3
OK
Select the source.
4
Select the label.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
79
OPTION SETTING
KEY LOCK
The set can be configured so that the remote control is required to control it. This feature can be used to
prevent unauthorized viewing.
OPTION
Move
OK
OPTION
Move
Menu Language
: English
Menu Language
: English
Audio Language
: English
Audio Language
: English
Subtitle Language : English
Subtitle Language : English
Hard of Hearing(
: Off
Hard of Hearing(
Data Service
: MHEG
Data Service
: MHEG
Country
: UK
Country
: UK
Input Label
KKey
e y Lock
Lock
Off
:: Off
Input Label
KKey
e y Lock
Lock
)
E
1MENU
2
OK
Select K e y L o c k.
OK
Select O n or O f f.
3
: Off
Off
:: Off
E
Select O P T I O N.
)
OK
Off
Off
On
• In Key Lock ‘On’, if the set is turned off, press
the r / I, INPUT, PR D E button on the TV or
POWER, INPUT, PR + - or NUMBER buttons on
the remote control.
• With the Key Lock On, the display ‘ Key Lock On
’ appears on the screen if any button on the
front panel is pressed while viewing the TV.
4
OK
Save.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
80
OPTION SETTING
DDC CI(Only RGB, DVI mode)
DDC/CI (Display Data Channel Command Interface) is a communication protocol for communications between
PC and set.
DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the set OSD
Set can be adjusted with PC by connecting communication between PC and set when DDC/CI is ON, and set
cannot be adjusted with PC because communication between PC and set is disconnected when DDC/CI is OFF.
<M1962D/M2062D/M2262D/M2362D>
OPTION
Move
OK
OPTION
D
Country
Move
OK
D
: UK
Country
Input Label
: UK
Input Label
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
: Off
Set ID
Power Indicator
DDC CI
CI
DDC
On
:: On
Power Indicator
DDC CI
CI
DDC
Mode Setting
: Home Use
Mode Setting
Factory Reset
Off
On
:: On
On
On
: Home Use
Factory Reset
<M2762D>
OPTION
Move
OK
OPTION
D
Input Label
OK
Input Label
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
Set ID
: Off
DDC CI
CI
DDC
On
:: On
Power Indicator
DDC CI
CI
DDC
Off
On
:: On
RTC
: Off
RTC
On
On
: Off
Mode Setting
: Home Use
Mode Setting
: Home Use
Power Indicator
Factory Reset
1MENU
Move
D
Factory Reset
Select O P T I O N.
2
OK
Select D D C C I.
OK
Select O n or O f f.
3
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
81
OPTION SETTING
RTC(Response time control) Only M2762D
-ODC (Over Drive Control)
This menu can reduce LCD response time or after image of LCD.
If you set ODC, you enable the response time control function.
OPTION
Move
OK
OPTION
D
Input Label
OK
Input Label
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
Set ID
: Off
Power Indicator
Power Indicator
DDC CI
: On
DDC CI
: On
RTC
RTC
:: On
Off
RTC
RTC
Mode Setting
: Home Use
Mode Setting
Offff
Off
:: On
O
ODC
: Home Use
Factory Reset
1MENU
Move
D
Factory Reset
Select O P T I O N.
2
OK
Select R T C.
3
OK
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
82
OPTION SETTING
MODE SETTING
We recommend setting the set to “Home Use” mode for the best picture in your home environment.
“Store Demo” mode is an optimal setting for displaying at stores.
<M1962D/M2062D/M2262D/M2362D>
OPTION
Move
OK
D
Country
: UK
Mode Setting
Input Label
Key Lock
: Off
Set ID
: Off
Selecting the environment.
Choose the setting mode you want.
Store Demo
Power Indicator
DDC CI
: On
Mode Setting
: Home Use
Home Use
Select [Home Use] to use this TV at home. To use this TV
at store, select [Store Demo].
Factory Reset
<M2762D>
OPTION
Move
OK
D
Mode Setting
Input Label
Key Lock
: Off
Set ID
: Off
Selecting the environment.
Choose the setting mode you want.
Power Indicator
Store Demo
DDC CI
: On
RTC
: Off
Mode Setting
: Home Use
Home Use
Select [Home Use] to use this TV at home. To use this TV
at store, select [Store Demo].
Factory Reset
1MENU
Select O P T I O N.
2
OK
Select M o d e S e t t i n g.
OK
Select S t o r e D e m o or H o m e U s e .
3
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
83
OPTION SETTING
Initializing
(Reset to original factory settings)
This function operates in current mode.
To initialize the adjusted value.
When the Lock System menu is “On”, the message to enter the password appears.
<M1962D/M2062D/M2262D/M2362D>
OPTION
Move
OPTION
OK
D
Country
Move
OK
D
: UK
Country
Input Label
: UK
Input Label
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
Set ID
: Off
Power Indicator
Power Indicator
DDC CI
: On
DDC CI
Mode Setting
Factory Reset
: Home Use
Mode Setting
Factory Reset
: On
All user
: Home
Usesettings and channel setting will be reset. Still Continue?
Yes
No
<M2762D>
OPTION
Move
OPTION
OK
D
Input Label
OK
Input Label
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
Set ID
: Off
Power Indicator
Power Indicator
DDC CI
: On
DDC CI
: On
RTC
: Off
RTC
Mode Setting
: Home Use
Mode Setting
: OffAll user settings and channel setting will
: Home
Usebe reset. Still Continue?
Factory Reset
1 MENU
Move
D
Factory Reset
Yes
No
Select O P T I O N.
2
OK
3
Select F a c t o r y R e s e t.
OK
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
84
PARENTAL CONTROL / RATINGS
SET PASSWORD & LOCK SYSTEM
Enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset.
LOCK
Move
LOCK
OK
1MENU
Move
OK
Off
L o c kSystem
S y s t e m :: Off
O
ff
Off
Lock
On
Set Password
Block Programme
Parental Guidance : Off
Input Block
L o c kSystem
S y s t e m :: Off
Off
Lock
Set Password
Block Programme
Parental Guidance : Off
Input Block
• If you forget your password, press ‘7’, ‘7’, ‘7’, ‘7’
Select L O C K.
on the remote control handset.
2
OK
Select L o c k S y s t e m.
OK
Select O n.
3
4
OK
5
OK
1
2
4
5
6
7
8
9
0
Set the password.
3
Input a 4-digit password.
Be sure to remember this number!
Re-enter new password to confirm.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
85
PARENTAL CONTROL / RATINGS
BLOCK PROGRAMME
Blocks any programmes that you do not want to watch or that you do not want your children to watch.
This function is available in Lock System “On”.
LOCK
Move
1
OK
YLE TV1
TV
DTV
Radio
D
Lock System
: Off
Set Password
Block
B l o c kProgramme
Programme
Parental Guidance : Off
Input Block
1 YLE TV1
2 YLE TV2
4 TV4 Stockholm
5 YLE FST
6 CNN
8 YLE24
9 YLE Teema
14 TV4 Film
24 TV4 Fakta
50 TV400
24 TV4 Fakta
84 Kanal Lokal
24 TV4 Fakta
86 Info/3sat
87 Doku/Kika
88 TVE 1
E
Pr. Change
D
F G
E
Navigation
P
Page Change
RETURN Previous
Block/Unblock
1MENU
Select L O C K.
2
Select B l o c k P r o g r a m m e.
OK
3
OK
Enter the Block Programme.
4
GREEN
Select a programme to be locked.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
86
PARENTAL CONTROL / RATINGS
PARENTAL CONTROL (IN DIGITAL MODE ONLY)
This function operates according to information from the broadcasting station. Therefore if the signal has
incorrect information, this function does not operate.
A password is required to gain access to this menu.
This set is programmed to remember which option it was last set to even if you switch the set off.
Prevents children from watching certain adult’s TV programmes, according to the ratings limit set.
LOCK
Move
LOCK
OK
Move
Lock System
: Off
Set Password
Block Programme
PParental
a r e n t a lGuidance
G u i d a n c: eOff: O f f
Lock System
: Off
Set Password
Block Programme
PParental
a r e n t a lGuidance
G u i d a n c: eOff: OFf f
Input Block
Input Block
1MENU
OK
Off
G
Close
Select L O C K.
2
OK
Select P a r e n t a l G u i d a n c e.
OK
Make appropriate adjustments.
3
4
OK
Save.
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
87
PARENTAL CONTROL / RATINGS
INPUT BLOCK
Enables you to block an input.
LOCK
Move
LOCK
OK
Lock System
: Off
Set Password
Block Programme
Parental Guidance : Off
Input
I n p u tBlock
Block
Move
Lock System
: Off
Set Password
Block Programme
Parental Guidance : Off
Input
I n p u tBlock
Block
OK
AV1
F
AV2
Off
G
Off
AV3
Off
Component
Off
RGB
Off
HDMI1
Off
HDMI2
Off
DVI
Off
Close
1MENU
Select L O C K.
2
OK
Select I n p u t B l o c k
OK
Select the source.
OK
Select O f f or O n.
3
4
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
88
TO USE A USB DEVICE
When connecting a USB device
When you connect a USB device, this pop-up menu is displayed, automatically.
If the pop-up menu does not appear, you can select Music List or Photo List in the USB menu.
“POP-UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated.
In USB device, you can not add a new folder or delete the existing folder.
1 Connect the USB device
to the U S B I N jack on
the rear of TV.
• This TV Supports on JPEG and MP3.
USB IN
USB memory
stick
When removing the USB device
Select the USB Eject menu before removing the
USB device.
1Q. MENU
2
Select P H O T O L I S T or M U S I C L I S T .
Select Eject.
2
PHOTO LIST
3
MUSIC LIST
OK
OK
Precautions when using the USB device
Only a USB storage device is recognizable.
If the USB storage device is connected through a USB hub, the device is not recognizable.
G A USB storage device using an automatic recognition programme may not be recognized.
G A USB storage device which uses its own driver may not be recognized.
G The recognition speed of a USB storage device may depend on each device.
G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may
cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has
normal music files or image files.
G Please use only a USB storage device which was formatted as a FAT16, FAT32, NTFS file system provided with
the Windows operating system. In case of a storage device formatted as a different utility programme which is
not supported by Windows, it may not be recognized.
Data in a USB storage device cannot be deleted in the NTFS file system.
G Please connect power to a USB storage device which requires an external power supply. If not, the device may
not be recognized.
G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered
by USB maker or an excessively long cable, the device may not be recognized.
G Some USB storage devices may not be supported or operated smoothly.
G Maximum of 999 files and folders can be recognized.
G Data in a USB storage device cannot be aligned.
Up to 128 English characters can be recognized as a file name.
G Please back up the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage.
G
G
89
TO USE A USB DEVICE
PHOTO LIST
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
PHOTO(*.JPEG) supporting file
Baseline: 15360 x 8640
Progressive format : 1024 x 768
• You can play JPEG files only.
• Only baseline scan is supported among JPEG (SOF0, SOF1 only).
• Non-supported files are displayed in the form of bitmap.
Screen Components
2
1MENU
OK
Select U S B.
OK
Select Photo List.
2
1
Moves to upper level folder
2
Current page/Total pages
3
4
Usable USB memory
5
Corresponding buttons on the
remote control
* MARK and FAV have same
function in USB mode (FAV
key operate like MARK key)
Page 2/3
Drive1
1366x768, 125KB
1
Up Folder
Navigation
4
USB Device
Photo List
Total number of marked photos
3
Option
No Marked
Free Space 150MB
Up Folder
KY103
KY101
KY104
KY102
KY105
JMJ001
JMJ005
JMJ002
JMJ006
JMJ003
JMJ007
JMJ004
JMJ008
P
Page Change
MARK
Mark
5
• Press the RETURN button to close the menu window.
90
RETURN
Exit
TO USE A USB DEVICE
Photo Selection and Pop-Up Menu
USB Device
Photo List
Page 2/3
Drive1
1366x768, 125KB
Free Space 150MB
Up Folder
KR103
KR101
KR104
KR102
KR105
JMJ001
JMJ005
JMJ002
JMJ006
JMJ003
JMJ007
JMJ004
Up Folder
Navigation
No Marked
Option
P
JMJ008
Page Change
MARK
Mark
RETURN
Exit
V i e w : Display the selected item.
G M a r k A l l : Mark all photos on the screen.
G Unmark All : Deselect all marked photos.
G D e l e t e : Delete the selected photo item.
G C l o s e : Close the pop-up menu.
G
USB Device
Photo List
Page 2/3
Drive1
No Marked
Free Space 150MB
Up Folder
KR103
KR101
KR102
JMJ001
JMJ002
1366x768,
125KB
Up Folder
Navigation
1
Option
JMJ003
KR104
1366x768, 125KB
KR105
View
JMJ005
Mark All
JMJ006
Delete
JMJ007
Close
JMJ004
P
Page Change
JMJ008
MARK
Mark
RETURN
Exit
Select the target folder or drive.
• Use the P
2
3
4
Select the desired photos.
OK
OK
Show the Pop-Up menu.
OK
button to navigation in the
photo page.
• Use the M A R K button to mark or unmark a
photo. When one or more photos are marked,
you can view individual photos or a slide show
of the marked photos. If no photos are marked,
you can view all photos individually or all photos in the folder in a slide show.
Select the desired Pop-Up menu.
• Press the RETURN button to close the menu window.
91
TO USE A USB DEVICE
Set up the menu in Full-Sized Screen
You can change the settings to display photos stored on a USB device, on a full-sized screen.
Detailed operations are available on full-sized photo view screen.
USB Device
Photo List
Page 2/3
Drive1
1366x768, 125KB
Up Folder
Navigation
Option
No Marked
Free Space 150MB
Up Folder
KR103
KR101
KR104
KR102
KR105
JMJ001
JMJ005
JMJ002
JMJ006
JMJ003
JMJ007
JMJ004
JMJ008
P
Page Change
MARK
Page 2/3
Drive1
No Marked
Exit
Free Space 150MB
Up Folder
KR103
KR101
KR102
JMJ001
JMJ002
1366x768, 125KB
JMJ003
KR104
Option
P
1/17
1366x768, 125KB
KR105
View
JMJ006
Delete
JMJ007
Close
Page Change
Slideshow
BGM
Delete
JMJ008
MARK
Mark
RETURN
Exit
Select the target folder or drive.
3
OK
OK
4
5
• Use the P
button to navigation in the
Select the desired photos.
Show the Pop-Up menu.
Select V i e w.
OK
The selected photo is displayed in full size.
• Press the RETURN button to close the menu window.
92
Hide
The aspect ratio of a photo may change the
size of the photo displayed on the screen in
full size.
Press the R E T U R N button to move to the previous menu screen.
photo page.
2
Option
JMJ005
Mark All
JMJ004
Up Folder
1
RETURN
USB Device
Photo List
Navigation
Mark
TO USE A USB DEVICE
6
OK
Select the Slideshow , B G M,
D e l e t e , Option or H i d e.
(Rotate),
• Use
button to select the previous or
next photo.
button to select and control the
• Use
menu on the full-sized screen.
1/17
Slideshow
BGM
Delete
Option
Hide
G
S l i d e s h o w : When no picture is selected, all photos in the current
folder are displayed during slide show. When selected, the selected
photos are displayed during slide show.
■ Set the time interval of the slide show in O p t i o n.
G
B G M : Listen to music while viewing photos in full size.
■ Set the BGM device and album in O p t i o n .
G
■
( R o t a t e ) : Rotate photos.
Rotates the photo 90°, 180°, 270°, 360°clockwise.
G
D e l e t e : Delete photos.
G
O P T I O N : Set values for S l i d e S p e e d and M u s i c F o l d e r.
■ Use
button and O K button to set values. Then go to
OK
and press O K to save the settings.
■ You cannot change M u s i c F o l d e r while BGM is playing.
Press F G to set the time interval
between slides.
Slide Speed
Fast
Music Folder
Music
OK
G
Cancel
H i d e : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press O K button
to display.
• Press the RETURN button to close the menu window.
93
TO USE A USB DEVICE
MUSIC LIST
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by
this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
MUSIC (*.MP3) supporting file
Bit rate 32 ~ 320kbps
• Sampling rate MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz.
Screen Components
1 MENU
2
OK
Select U S B.
Select Music List.
OK
2
1
Moves to upper level folder
2
Current page/Total pages
3
Total number of marked music
title
4
Usable USB memory
5
Corresponding buttons on
the remote control
* MARK and FAV have
same function in USB
mode (FAV key operate
like MARK key)
3
4
USB Device
Music List
Page 2/3
No Marked
Music
Free Space 150MB
Title
Duration
Up Folder
1:340, 120KB
1
Up Folder
Navigation
Option
P
Page Change
MARK
Mark
5
• Press the RETURN button to close the menu window.
94
RETURN
Exit
TO USE A USB DEVICE
Music Selection and Pop-Up Menu
As shown , up to 6 music titles are listed per page.
USB Device
Music List
No Marked
Page 2/3
Free Space 150MB
Duration
Title
Music
Up Folder
1:340, 120KB
Navigation
Option
P
Page Change
MARK
Mark
RETURN
Exit
USB Device
Music List
No Marked
Page 2/3
Free Space 150MB
Duration
Title
Music
Up Folder
4395KB
1Kbps
Play
Play with Photo
Mark All
1:340, 120KB
Delete
Close
Up Folder
Navigation
1
2
3
4
Option
P
Page Change
MARK
Mark
RETURN
Exit
Select the target folder or drive.
Select the desired music title
OK
OK
Show the Pop-Up menu.
OK
P l a y (During stop) : Play the selected music titles.
Once a music finishes playing, the next selected one
will be played. When there are no selected music
titles to play, the next one in the current folder will
be played. If you go to a different folder and press
the O K button, the current music in playback will
stop.
G P l a y M a r k e d : Play the selected music titles. Once
a music finishes playing, the next selected one will
be played automatically.
G S t o p P l a y (During playback) : Stop the playing
music titles.
G P l a y w i t h P h o t o : Start playing the selected
music titles and then move to the Photo List.
G M a r k A l l : Mark all music titles in the folder.
G U n m a r k A l l : Deselect all marked music titles.
G D e l e t e : Delete the selected music titles.
G C l o s e : Close the pop-up menu.
G
Up Folder
• Use the P
button to navigation in the
music page.
• Use M A R K button to mark or unmark a music.
When one or more music files are marked, the
marked music title will be played in sequence.
For example, if you want to listen to only one
music repeatedly, just mark the music only and
play it. If no music is marked, all the music in
the folder will be played in sequence.
Select the desired Pop-Up menu.
• Press the RETURN button to close the menu window.
95
TO USE A USB DEVICE
■
If you don't press any button for a while during the
playing, the play information box (as shown in the
below) will float as a screen saver.
■
The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to
an fixed image remaining on the screen for a extended
period of time.
! NOTE
When music is playing,
is displayed in back of the music title.
G A damaged or corrupted music does not play but displays 00:00 in playtime.
G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime.
G If you press O K, A buttons, screen saver is stopped.
G The P L A Y ( G) , P a u s e ( I I ) , A, GG, FF buttons on the remote control are also available in this mode.
G You can use the GG button to select the next music and the FF button to select the previous music.
G
Using the remote control
When playing,
FF
/ GG
repeatedly, press the R E W( FF) button to speed up FF -> FFF -> FFFF ->
FFFFF ->FFFFFF .
repeatedly, press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG
-> GGGGGG.
■
II
During playback, press the P a u s e( I I) button.
■ Still screen is displayed.
■
P L A Y ( G)
96
Pressing these buttons repeatedly increases the fast forward/reverse speed.
When using the
or
button during playback a cursor indicating the position
can be viewed on the screen.
Press the P L A Y( G) button to return to normal playback.
TELETEXT
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news,
weather, television programmes, share prices and many other topics.
The teletext decoder of this set can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext)
consists of a number of pages which are selected by directly entering the corresponding page number. TOP and
FASTEXT are more modern methods allowing quick and easy selection of teletext information.
SWITCH ON/OFF
Press the T E X T button to switch to teletext. The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number
indicates your selection, while the second shows the current page displayed.
Press the T E X T or E X I T button to switch off teletext. The previous mode reappears.
SIMPLE TEXT
A
Page selection
1
Enter the desired page number as a three-digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three-digit number and then re-enter the correct page number.
The PR+ or - button can be used to select the previous or next page.
2
TOP TEXT
The user guide displays four fields--red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
A
Block / group / page selection
4
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively, the PR + button can be used.
The red button permits you to return to previous selection. Alternatively, the PR - button can be used.
A
Direct page selection
1
2
3
Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three-digit number using
the NUMBER buttons in TOP mode.
97
TELETEXT
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
A Page selection
1
2
3
4
Press the i button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number
with the NUMBER buttons in FASTEXT mode.
The PR + or - button can be used to select the previous or next page.
SPECIAL TELETEXT FUNCTIONS
?
A REVEAL
Press this button to display concealed information, such as solutions of riddles or puzzles.
Press this button again to remove the information from the display.
A UPDATE
Displays the TV picture on the screen while waiting for the new teletext page. The display will appear at the top
left hand corner of the screen. When the updated page is available then display will change to the page number.
Press this button to view the updated teletext page.
A TIME
When viewing a TV programme, press this button to display the time at the top right hand corner of the screen.
Press this button again to remove the display. In teletext mode, press this button to select a sub page number. The
sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the
RED/GREEN, PR + or - or NUMBER buttons.
Press again to exit this function.
A HOLD
Stops the automatic page change which will occur if a teletext page consists of two or more sub pages. The number of sub pages and the sub page displayed is usually shown on the screen below the time. When this button is
pressed, the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is
inhibited. To continue press this button again.
98
DIGITAL TELETEXT
*This function works in UK only.
The set gives you access to a digital teletext which is greatly improved in various aspects such as text,
graphics and so on.
This digital teletext can be accessed by special digital teletext services and specific services which
broadcast digital teletext.
You should select off from the subtitle language to display teletext by pressing SUBTITLE button.
TELETEXT WITHIN DIGITAL SERVICE
1
Press the numeric or PR + or - button to select a digital
service which broadcasts digital teletext.
To know which are digital teletext services, refer to the
EPG service list.
2
Follow the indications on digital teletext and move onto the
next step by pressing TEXT, OK, D or E, F or G, RED,
GREEN, YELLOW, BLUE or NUMBER buttons and so on.
3
To change digital teletext service, just select a different
service by the numeric or PR + or - button.
If pressing the MENU, GUIDE or INFO i button, the teletext service disappear temporarily. When pressing these
buttons again, the teletext service is appeared.
TELETEXT IN DIGITAL SERVICE
1
Press the numeric or PR + or - button to select a certain
service which broadcasts digital teletext.
2
Press the TEXT or colour button to switch on teletext.
3
Follow the indications on digital teletext and move onto
the next step by pressing OK, D or E, F or G, RED,
GREEN, YELLOW, BLUE or NUMBER buttons and so on.
4
Press the TEXT or colour button to switch off digital teletext and return to TV viewing.
Some services may allow you to access text services by
pressing the RED button.
If pressing the MENU, GUIDE or INFO i button, the teletext service disappears temporarily. When pressing these
buttons again, the teletext service is appears.
99
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the set.
A Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A Ensure that the correct remote operating mode is set: TV, VCR, etc.
A Install new batteries.
A
The remote control
doesn’t work
Power is suddenly
turned off
Is the sleep timer set?
A Check the power control settings. Power interrupted.
A No broadcast on station tuned with A u t o s l e e p activated.
A
The video function does not work.
Check whether the product is turned on.
Try another channel. The problem may be with the broadcast.
A Is the power cord inserted into wall power outlet?
A Check your antenna direction and/or location.
A Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
A
A
No picture &No sound
Picture appears slowly
after switching on
A
This is normal, the image is muted during the product startup process. Please
contact your service centre, if the picture has not appeared after five minutes.
Adjust Colour in menu option.
A Keep a sufficient distance between the product and the VCR.
A Try another channel. The problem may be with the broadcast.
A Are the video cables installed properly?
A Activate any function to restore the brightness of the picture.
A
No color, poor colour,
or poor picture
Horizontal/vertical bars
or picture shaking
A
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
A Check for sources of possible interference.
A
Poor reception on
some channels
Lines or streaks
in pictures
100
A
A
Check antenna (Change the direction of the antenna).
APPENDIX
The audio function does not work.
A
Picture OK & No sound
A
A
A
No output from one
of the speakers
Unusual sound from
inside
the product
Press the VOL + or - button.
Sound muted? Press MUTE button.
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
A
Adjust B a l a n c e in menu option.
A
A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a problem with
the product.
Only RGB/DVI mode applied
No image is displayed.
Power is on, power indictor is blue but the screen
appears extremely dark.
Does the power indicator look blinking amber?
Does the ‘Out of range’
message appear?
Does the ‘Check signal
cable’ message appear?
A
Adjust brightness and contrast again.
A
If the product is in power saving mode, move the mouse or press any key.
A
The signal from the PC (Video card) is out of the vertical or horizontal
frequency range of the product.
Adjust the frequency range by referring to the Specifications in this user’s guide.
A
The signal cable between PC and product is not connected. Check the signal cable.
Press the ‘INPUT’ button in the remote control to check the input signal.
A
101
APPENDIX
‘Unknown Product’ message appears when the product is connected.
A
Install the product driver, which is provided with the product, or download it
from the web site.
(http://www.lge.com)
A
See if the plug_&_play function is supported by referring to the video card
user’s guide.
Did you install the driver?
After-image appears on the product.
After-image appears when
the product is turned off.
A
If you use a fixed image for a long time, the pixels may be damaged quickly.
Use the screen saver function.
A
Set screen color resolution to more than 24 bits (true color)
Select control Panel-Display-Settings-Color Table menu in Windows.
A
Check the connection status of the signal cable.
A
Several pixels (red, green, white or black color) may appear on the screen,
which can be attributable to the unique characteristics of the LCD panel.
It is not a malfunction of the LCD.
Screen color is abnormal.
Screen has poor color resoluion (16_colors).
Screen color is unstable
or mono color.
Do back spots appear on
the screen?
Only RGB mode applied
The screen image looks abnormal.
A
Is the screen position
wrong?
Do thin lines appear on
the background screen?
Horizontal noise appears
or the characters look
blurred.
102
A
Adjust the Position menu in OSD.
See if the video card resolution and frequency are supported by the product.
If the frequency is out of range, set to the recommended resolution in the
Control Panel-Display-Setting menu.
A
Adjust the Clock menu in OSD.
A
Adjust the Phase menu in OSD.
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy
your new set.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
To keep the dust off your screen for a while, wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dishwashing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the
screen.
2
Make sure the excess water is off the screen, and then let it air-dry before you turn on your set.
Cleaning the Cabinet
A
A
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
Extended Absence
CAUTION
G
If you expect to leave your set dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
103
APPENDIX
PRODUCT SPECIFICATIONS
<M1962D>
LCD Panel
Video Signal
Screen Type
18.51 inches Wide (470.1mm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 470.1mm
Pixel Pitch
0.30(H) x 0.30(V) mm
Max. Resolution
1366 X 768 @60 Hz
Recommended Resolution
1360 X 768 @60 Hz
Horizontal Frequency
30 - 61 kHz
Vertical Frequency
56 - 75 Hz
Synchronization Type
Separate Sync, Digital
Input Connector
Power
Tilt
TV, D-Sub Analog, SCART*2, PC Audio In, component, DVI-D, HDMI*2, CVBS
Rated Voltage
AC100-240V~ 50/60 Hz 0.6A
Power Consumption
On Mode
: 40W (typ.)
R G B)
Sleep Mode 1W (R
Off Mode
0.5 W
Tilt Range
-5 ~ 15°
Dimensions (Width x Height x Depth)
Weight
Operating Temperature
Environmental
conditions
104
10 ~ 35°C
Operating Humidity
20 ~ 80%
Storage Temperature
-10 ~ 60°C
Storage Humidity
■
449.7 x 368.8 x 221.6 mm (17.70 x 14.52 x 8.72 inches)
3.88 kg / 8.55 lbs
5 ~ 90%
The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
PRODUCT SPECIFICATIONS
<M2062D>
LCD Panel
Video Signal
Screen Type
20.0 inches Wide (508.5 mm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size : 508.5 mm
Pixel Pitch
0.2766 (H) x 0.2766 (V)
Max. Resolution
1600 X 900 @60 Hz
Recommended Resolution
1600 X 900 @60 Hz
Horizontal Frequency
30 - 83 kHz
Vertical Frequency
56 - 75 Hz
Synchronization Type
Separate Sync, Digital
Input Connector
Power
Tilt
TV, D-Sub Analog, SCART*2, PC Audio In, component, DVI-D, HDMI*2, CVBS
Rated Voltage
AC 100-240 V~ 50/60 Hz 0.9 A
Power Consumption
On Mode : 50W (typ.)
R G B)
Sleep Mode
1W (R
Off Mode
0.5W
Tilt Range
-5 ~ 15°
Dimensions (Width x Height x Depth)
Weight
Operating Temperature
Environmental
conditions
10 ~ 35°C
Operating Humidity
20 ~ 80%
Storage Temperature
-10 ~ 60°C
Storage Humidity
■
482.3 x 384.2 x 221.6 mm (18.99 x 15.13 x 8.72 inches)
4.8 kg / 10.58 lbs
5 ~ 90%
The specifications shown above may be changed without prior notice for quality improvement.
105
APPENDIX
PRODUCT SPECIFICATIONS
<M2262D>
LCD Panel
Video Signal
Screen Type
21.53 inches Wide (546.86 mm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 546.86 mm
Pixel Pitch
0.248(H) x 0.248(V) mm
Max. Resolution
1920 X 1080 @60 Hz
Recommended Resolution
1920 X 1080 @60 Hz
Horizontal Frequency
30 - 83 kHz
Vertical Frequency
56 - 75 Hz
Synchronization Type
Separate Sync, Digital
Input Connector
Power
Tilt
TV, D-Sub Analog, SCART*2, PC Audio In, component, DVI-D, HDMI*2, CVBS
Rated Voltage
AC100-240V~ 50/60 Hz 0.9A
Power Consumption
On Mode
: 53W (typ.)
R G B)
Sleep Mode
1W (R
Off Mode
0.5W
Tilt Range
-5 ~ 15°
Dimensions (Width x Height x Depth)
Weight
Environmental
conditions
Operating Temperature
10 ~ 35°C
Operating Humidity
20 ~ 80%
Storage Temperature
-10 ~ 60°C
Storage Humidity
■
106
517.2 x 399.8 x 221.6 mm (20.36 x 15.74 x 8.72 inches)
4.7 kg / 10.4 lbs
5 ~ 90%
The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
PRODUCT SPECIFICATIONS
<M2362D>
LCD Panel
Video Signal
Screen Type
23 inches Wide (584.2 mm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size : 584.2 mm
Pixel Pitch
0.265(H) x 0.265(V) mm
Max. Resolution
1920 X 1080 @60 Hz
Recommended Resolution
1920 X 1080 @60 Hz
Horizontal Frequency
30 - 83 kHz
Vertical Frequency
56 - 75 Hz
Synchronization Type
Separate Sync, Digital
Input Connector
Power
Tilt
TV, D-Sub Analog, SCART*2, PC Audio In, component, DVI-D, HDMI*2, CVBS
Rated Voltage
AC 100-240V ~ 50/60 Hz 1.0A
Power Consumption
On Mode
: 55W (typ.)
Sleep Mode
1W (RGB)
Off Mode
0.5W
Tilt Range
-5 ~ 15°
Dimensions (Width x Height x Depth)
Weight
Environmental
conditions
■
551.8 x 419.5 x 221.6 mm (21.72 x 16.52 x 8.72 inches)
5.2 kg / 11.46 lbs
Operating Temperature
Operating Humidity
10 ~ 35°C
20 ~ 80%
Storage Temperature
Storage Humidity
-10 ~ 60°C
5 ~ 90%
The specifications shown above may be changed without prior notice for quality improvement.
107
APPENDIX
PRODUCT SPECIFICATIONS
<M2762D>
LCD Panel
Video Signal
Screen Type
27 inches Wide (686 mm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 686 mm
Pixel Pitch
0.3114(H) x 0.3114(V) mm
Max. Resolution
1920 X 1080 @60 Hz
Recommended Resolution
1920 X 1080 @60 Hz
Horizontal Frequency
30 - 83 kHz
Vertical Frequency
56 - 75 Hz
Synchronization Type
Separate Sync, Digital
Input Connector
Power
TV, D-Sub Analog, SCART*2, PC Audio In, component, DVI-D, HDMI*2, CVBS
Rated Voltage
AC 100-240V ~ 50/60 Hz 1.2A
Power Consumption
On Mode
Sleep Mode
Off Mode
Tilt
Tilt Range
-5 ~ 15°
Swivel
Swivel Range
358°
Dimensions (Width x Height x Depth)
Weight
Environmental
conditions
■
108
: 100W (typ.)
1W (RGB)
0.5W
649.1 x 485 x 210 mm (25.56 x 19.09 x 8.27 inches)
7.2 kg / 15.87 lbs
Operating Temperature
Operating Humidity
10 ~ 35°C
20 ~ 80%
Storage Temperature
Storage Humidity
-10 ~ 60°C
5 ~ 90%
The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
PROGRAMMING THE REMOTE CONTROL
The remote is a multi-brand or universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
1
Test your remote control.
To find out whether your remote control can operate the component without programming, turn on the
component such as a VCR and press the corresponding mode button (such as a D V D or V C R) on the
remote control, while pointing at the component. Test the P O W E R and P R + / - buttons to see if the
component responds properly. If not, the remote requires programming to operate the device.
2
Turn on the component to be programmed, then press the corresponding mode button (such as a D V D or
V C R) on the remote control. The remote control button of desired device is lighted.
3
Press the M E N U and M U T E buttons simultaneously, the remote control is ready to be programmed for
the code.
4
Enter a code number using the number buttons on the remote control. Programming code numbers for the
corresponding component can be found on the following pages. Again, if the code is correct, the device
will turn off.
5
Press the M E N U button to store the code.
6
Test the remote control functions to see if the component responds properly. If not, repeat from step 2.
PROGRAMMING CODE
DVD
Brand
Codes
APEX DIGITAL
022
DENON
020
GE
005
HARMAN KARDON
JVC
012
LG
001
MAGNAVOX
013
MARANTZ
024
014
006
027
010 016 025
Brand
Codes
Brand
Codes
MITSUBISHI
NAD
ONKYO
PANASONIC
PHILIPS
PIONEER
PROCEED
PROSCAN
002
023
008
003
013
004
021
005
RCA
SAMSUNG
SONY
THOMPSON
TOSHIBA
YAMAHA
ZENITH
005
011
007
005
019
009
010
017
009
026
006
015
006
008
018
016 025
006
109
APPENDIX
VCR
Brand
AIWA
AKAI
Codes
034
016
125
AMPRO
072
ANAM
031
AUDIO DYNAMICS 012
BROKSONIC
035
CANON
028
CAPEHART
108
CRAIG
003
CURTIS MATHES 031
DAEWOO
005
065
112
DAYTRON
108
DBX
012
DYNATECH
034
ELECTROHOME 059
EMERSON
006
029
036
129
FISHER
003
FUNAI
034
GE
031
107
GO VIDEO
132
HARMAN KARDON
HITACHI
004
043
INSTANTREPLAY 031
JCL
031
JCPENNY
012
040
JENSEN
043
JVC
012
048
130
KENWOOD
014
047
LG (GOLDSTAR) 001
101
LLOYD
034
LXI
003
017
MAGIN
040
110
Brand
Codes
Brand
MAGNAVOX
031
067
012
069
101
027
031
003
033
101
045
013
013
049
151
034
024
012
048
043
053
066
133
SAMSUNG
043 046 124
146
MARANTZ
033
023
037
031
103
039 043
129
033
MARTA
MATSUI
MEI
MEMOREX
040
033
007
108
116
135
041
010 064
110 111
117 119
MGA
MINOLTA
MITSUBISHI
023 039 043
053
017
031
037
131
008
025
034
046
138
009
033
109
136
012
018
063
033
033
013
066
063 072
144 147
031
050
150
034
048
012
106
027
035
101
153
010
045
026 034
137 150
015 033
101
033 043
055 060
152
039 043
MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RCA
REALISTIC
013 020
114 123
009 013 014
034 101 106
RICO
RUNCO
SALORA
013
063
031
031
067
101
013
108
072
011
033
013
040
107
145
003
031
053
058
148
014
033 034 041
068
031 033 067
030
033
010
034
102
046
020
020
051
014 031
053 072
134 139
059
045 046
059 061
040
034
023 039 043
054
070 074 083
140 145
020 031 033
034 067
033 034 054
071 101
021 048
014
066
020
041
109
147
008
033
054
075
033
062
140
145
034
063
144
010 014
034 040
101
Codes
032
105
113
125
SANSUI
022
SANYO
003
102
SCOTT
017
131
SEARS
003
013
031
101
SHARP
031
SHINTOM
024
SONY
003
056
077
SOUNDESIGN
034
STS
013
SYLVANIA
031
067
SYMPHONIC
034
TANDY
010
TATUNG
039
TEAC
034
TECHNICS
031
TEKNIKA
019
101
THOMAS
034
TMK
006
TOSHIBA
008
059
TOTEVISION
040
UNITECH
040
VECTOR RESEARCH 012
VICTOR
048
VIDEO CONCEPTS 012
VIDEOSONIC
040
WARDS
003
031
053
YAMAHA
012
ZENITH
034
058
040 102 104
107 109 112
115 120 122
043 048 135
007 010 014
134
037 112 129
008 009 010
014 017 020
042 073 081
054 149
009 031 052
057 058 076
078 149
033 034 059
034
043
039 043
033 070
031 033 034
013 042 047
082 112 131
101
034 046
013
033
054
034
048
072
017
034
131
039
056
080
024
040
043
101
APPENDIX
IR CODES
1. How to Connect
A
Connect your wired remote control to the Remote Control port on the set.
2. Remote Control IR Codes
A
Output waveform
Single pulse, modulated with 37.917 KHz signal at 455 KHz
Carrier frequency
Tc
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
A
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
A
Tf
Lead code
9 ms
4.5 ms
A
Repeat code
0.55 ms
9 ms
A
2.25 ms
Bit description
Bit ”0”
Bit ”1”
0.56 ms
0.56 ms
2.24 ms
1.12 ms
A
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
111
APPENDIX
Code (Hexa)
00
01
02
03
40
41
06
07
08
09
0B
10
11
12
13
14
15
16
17
18
19
1A
1E
20
21
28
39
43
44
45
50
F0
0A
5B
1E
53
61
63
71
72
AA
AB
112
Function
PR +
PR VOL +
VOL Up (D)
Down (E)
Right (G)
Left (F)
POWER
MUTE
INPUT
Number Key 0
Number Key 1
Number Key 2
Number Key 3
Number Key 4
Number Key 5
Number Key 6
Number Key 7
Number Key 8
Number Key 9
Q.VIEW
FAV
TEXT
T.OPT
RETURN
SUBTITLE
MENU
OK( )
Q.MENU
TV/PC
TV/RADIO
I/II
EXIT
MARK
LIST
BLUE Key
YELLOW Key
GREEN Key
RED Key
INFO i
GUIDE
Note
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON (POWER ON/OFF)
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an A/V
control system) to control the product’s functions externally.
Connect the serial port of the control device to the RS232C jack on the product back panel.
Note: RS-232C connection cables are not supplied with
the product.
RS-232C IN
(CONTROL & SERVICE)
Type of Connector; D-Sub 9-Pin Male
No.
Pin Name
1
2
3
4
5
6
7
8
9
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
1
5
6
9
No Connection
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
113
APPENDIX
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. G p . 118
<M1962D/M2062D/M2262D/M2362D>
OPTION
Move
OPTION
OK
D
Country
Move
OK
D
: UK
Country
Input Label
: UK
Input Label
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
Set ID
: Off
Power Indicator
Off
F
Power Indicator
Close
DDC CI
: On
DDC CI
: On
Mode Setting
: Home Use
Mode Setting
: Home Use
Factory Reset
G
Factory Reset
<M2762D>
OPTION
Move
OPTION
OK
D
Input Label
OK
Input Label
Key Lock
: Off
Key Lock
: Off
Set ID
: Off
Set ID
: Off
Power Indicator
F
Power Indicator
Off
Close
DDC CI
: On
DDC CI
: On
RTC
: Off
RTC
: Off
Mode Setting
: Home Use
Mode Setting
: Home Use
Factory Reset
1MENU
Move
D
Factory Reset
Select O P T I O N.
2
OK
Select S e t I D.
OK
adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1~99.
3
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
114
G
APPENDIX
Communication Parameters
Baud rate : 9600 bps (UART)
A Data length : 8 bits
A Parity : None
Stop bit : 1 bit
A Communication code : ASCII code
A Use a crossed (reverse) cable.
A
A
Command Reference List
Transmission / Receiving Protocol
COMMAND COMMAND
DATA
1
2
(Hexadecimal)
01. Power
02. Aspect Ratio
03. Screen Mute
04. Volume Mute
05. Volume Control
06. Contrast
07. Brightness
08. Colour
09. Tint
10. Sharpness
11. OSD Select
12. Remote control lock mode
13. Treble
14. Bass
15. Balance
16. Colour Temperature
17. Auto Configure
18. Tune Command
19. Programme momory/Skip
20. Key
21. Control Backlight
22. Input select (Main)
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
j
m
m
m
m
x
a
c
d
e
f
g
h
i
j
k
l
m
r
s
t
u
u
a
b
c
g
b
00 ~ 01
Refer to p. 116
00 ~ 01
00 ~ 01
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 01
00 ~ 01
00 ~ 64
00 ~ 64
00 ~ 64
00 ~ 06
01
Refer to p. 118
00 ~ 01
Key Code
00 ~ 64
Refer to p. 118
* When setting 15 ~ 22, a menu does not appear on screen.
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1] : First command to control the TV.
(j, k, m or x)
* [Command 2] : Second command to control the TV.
: You can adjust the set ID to choose
* [Set ID]
desired monitor ID number in option
menu. Adjustment range is 1 ~ 99.
When selecting Set ID ‘0’, every
connected set is controlled.
Set ID is indicated as decimal (1~99)
on menu and as Hexa decimal
(0x0~0x63) on transmission/
receiving protocol.
: To transmit command data.
* [DATA]
Transmit ‘FF’ data to read status of
command.
: Carriage Return
* [Cr]
ASCII code ‘0x0D’
[
]
:
ASCII code ‘space (0x20)’
*
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The TV transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if
the data is in data read mode, it indicates present status data. If the data is in data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The TV transmits ACK (acknowledgement) based on
this format when receiving abnormal data from
nonviable functions or communication errors.
115
APPENDIX
01. Power (Command: k a)
04. Volume Mute (Command: k e)
G To control Power On/Off of the TV.
G To control volume mute on/off.
Transmission
You can also adjust mute using the MUTE button on
remote control.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Ack
01
: Power On
[a][ ][Set ID][ ][OK/NG][Data][x]
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack
[e][ ][Set ID][ ][OK/NG][Data][x]
02. Aspect Ratio (Command: k c) (Main Picture Size)
05. Volume Control (Command: k f)
G To adjust the screen format. (Main picture format)
G To adjust volume.
You can also adjust the screen format using the
A s p e c t R a t i o in the PICTURE menu.
(1) ATV, AV1,2,3 Input mode
- 16:9 / Original / 4:3 / 14:9 / Cinema Zoom /
Zoom / Full Wide
(2) DTV
- 16:9 / Just Scan / Original / 4:3 / 14:9 / Cinema
Zoom / Zoom
(3) RGB, DVI, HDMI Input (HDMI-PC) mode
- 4:3 / 16:9
(4) Component, HDMI input (not HDMI-PC) mode
- 16:9 / 4:3 / 14:9 / Cinema Zoom / Zoom
(Just Scan : Only 720p over)
Transmission
You can also adjust volume with the VOLUME buttons
on remote control.
Transmission
Normal screen (4:3)
Wide screen (16:9)
Zoom
Original
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping’. See page 118.
Ack
[f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
G To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 :
02 :
04 :
06 :
[k][f][ ][Set ID][ ][Data][Cr]
07 : 14:9
09 : Just Scan
0B : Full Wide
10~1F : Cinema Zom 1~16
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping’. See page 118.
Ack
[g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
G To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping’. See page 118.
Ack
03. Screen Mute (Command: k d)
[h][ ][Set ID][ ][OK/NG][Data][x]
G To select screen mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
01 : Screen mute on (Picture off)
Ack
[d][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
G To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping’. See page 118.
Ack
[i][ ][Set ID][ ][OK/NG][Data][x]
116
APPENDIX
09. Tint (Command: k j)
13. Treble (Command: k r)
G To adjust the screen tint.
G To adjust treble.
You can also adjust tint in the PICTURE menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping’. See page 118.
Ack
[j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
You can also adjust treble in the AUDIO menu.
In case that SRS TruSurround HD is ‘On’, it doesn’t
operate and is fixed to 50.
No operation at USB input
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping’. See page 118.
Ack
[r][ ][Set ID][ ][OK][Data][x]
G To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping’. See page 118.
Ack
[k][ ][Set ID][ ][OK/NG][Data][x]
14. Bass (Command: k s)
G To adjust Bass.
You can also adjust bass in the AUDIO menu.
In case that SRS TruSurround HD is ‘On’, it doesn’t
operate and is fixed to 50.
No operation at USB input
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
11. OSD Select (Command: k l)
G To select OSD (On Screen Display) on/off when
controlling remotely.
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping’. See page 118.
Ack
[s][ ][Set ID][ ][OK][Data][x]
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
15. Balance (Command: k t)
Data 00 : OSD off
Ack
G To adjust balance.
01 : OSD on
[l][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust balance in the AUDIO menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
1 2 . Remote control lock mode ( C o m m a n d : k m )
G To lock the front panel controls on the monitor and
remote control.
Transmission
Data Min : 00 ~ Max : 64
* Refer to ‘Real data mapping’. See page 118.
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
[k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
Ack
01 : Lock on
16. Colour Temperature (Command: k u)
G To adjust colour temperature. You can also adjust
[m][ ][Set ID][ ][OK/NG][Data][x]
Colour Temperature in the PICTURE menu.
Transmission
* If you are not using the remote control, use this mode.
When main power is on/off, external control lock is
released.
[k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm(not RGB DVI mode)
05:9300K 06:6500K(Only RGB DVI mode)
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
117
APPENDIX
17. Auto Configure (Command: j u)
20. Key (Command : m c)
G To adjust picture position and minimize image shaking
G To send IR remote key code.
automatically. It works only in RGB (PC) mode.
Transmission
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
Ack
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code - Refer to page 112.
Ack
[c][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping
00 : Step 0
A : Step 10 (Set ID 10)
21. Control Backlight (Command: m g)
G To Control the backlight. ( O n l y A u t o B r i g h t O f f )
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
Data : Min: 00 ~ Max: 64 (*transmit by hexadecimal code)
64 : Step 100
Ack
6E : Step 110
[g][ ][Set ID][ ][OK/NG][Data][x]
73 : Step 115
74 : Step 116
C7: Step 199
22. Input select (Command: x b)
(Main Picture Input)
FE : Step 254
FF : Step 255
G To select input source for main picture.
18. Tune Command (Command: m a)
G Select channel to following physical number.
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Data 00 : High channel data
Data 01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 88 (188H),
DTV No. 0 -> Don’t care
Data 02 : 0x00 : ATV, 0x10 : DTV, 0x20 : Radio
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data Structure
MSB
0
LSB
0
0
0
0
0
0
External Input
Input Number
External Input
Data
0
0
0
0
DTV
0
0
0
1
Analogue
0
0
1
0
AV
0
1
0
0
Component
[a][ ][Set ID][ ][OK/NG][Data][x]
0
1
1
0
RGB
Data Min: 00 ~ Max: 7DH
1
0
0
0
DVI
1
0
0
1
HDMI
Channel data range
Analogue - Min: 00 ~ Max: 63 (0~99)
Digital - Min: 00 ~ Max: 3E7 (0~999)
Ack
19. Programme memory/Skip (Command: m b)
G To set skip status for the current Programme.
Data
0
0
0
0
Input1
[m][b][ ][Set ID][ ][Data][Cr]
0
0
0
1
Input2
Data 00 : Skip
01 : Memory
0
0
1
0
Input3
Transmission
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
118
Input Number
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
0
UK Only