STAINLESS STEEL
HAND SINKS
SPECIAL PURPOSE
Item #:
Keyhole Bracket for
easier installation and
greater stability.
Qty #:
Model #:
Project #:
FEATURES:
7-PS-72
7-PS-64
7-PS-727
CLASS 1 SECURITY
INSTALLATION
7-PS-747
CLASS 2 SECURITY
INSTALLATION
One piece Deep Drawn sink bowl design.
Sink bowl is 10” x 14” x 5”.
All sink bowls have a large liberal radii with a minimum dimension
of 2” and are rectangular in design for increased capacity.
Keyhole wall mount bracket.
Stainless steel basket drain 1-1/2” IPS.
Splash mounted 4” O.C. gooseneck faucet furnished with aerator.
Specific Features:
7-PS-55 features eye wash faucet attachment.
7-PS-64 features tubular support brackets.
7-PS-72 is H.A.C.C.P. compliant hand sink featuring slow,
self-closing, metering faucet with mixing valve.
7-PS-727 Unit totally enclosed. Bottom security panel provides
access for installation and services. Vandal Proof Aerators.
All fasteners are stainless steel tamper proof. Concealed drain.
Heavy duty gooseneck faucet. Towel dispenser with hinged towel
box with lock. Unit uses standard C-fold towels. Liquid Soap
dispenser.
7-PS-747 Unit totally enclosed. Bottom security panel provides
access for installation and services. Vandal Proof Aerators.
All fasteners are stainless steel tamper proof. Concealed drain.
Heavy duty gooseneck faucet.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to a satin
finish.
Die formed Countertop Edge with a 3/8” No-Drip offset.
One sheet of stainless steel - No Seams.
7-PS-55
MATERIAL:
Heavy gauge type 304 series stainless steel.
Wall mounting bracket is galvanized and of offset design.
All fittings are brass / chrome plated unless otherwise indicated.
MECHANICAL:
IMPORTANT: Faucet-mounted eyewashes require two motions to operate (turn
on water, pull knob to activate eyewash flow). Therefore, Advance Tabco does
not believe that these units meet the provisions of ANSI Z358.1-2004 as eyewash units. These units are intended solely as supplemental units in addition to
dedicated, plumbed eyewash equipment installed in the workplace.
Faucet-mounted eyewashes should be used with cold or warm water only. Use of
hot water might cause scalding.
Eyewash Faucets not to be used with Electronic Faucets.
Faucet supply is 1/2” IPS male thread hot and cold.
Standard Faucet conforms to NSF 61 Standard 9.
Faucets Are AB1953 Lead Free Compliant.
For Replacement Faucets & Upgrades, Drains & Accessories
Visit our website at www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
www.advancetabco.com
For Orders & Customer Service:
Email: customer@advancetabco.com or Fax: 631-242-6900
For Smart Fabrication™ Quotes:
Email: smartfab@advancetabco.com or Fax: 631-586-2933
REF-B
DIMENSIONS and SPECIFICATIONS
TOL Overall: ± .500” Interior: ± .250”
FITTINGS SUPPLIED AS SHOWN
7-PS-72
17 1/4"
7-PS-64
ALL DIMENSIONS ARE TYPICAL
17 1/4"
2"
8 5/8"
CL
2"
15 1/4"
10"
17 1/4"
10"
14"
Faucet
14"
Metered Faucet
8"
25 lbs.
8"
2"
5"
13"
1 1/2"
11 1/8"
15 lbs.
17 1/4"
7-PS-55
EYE WASH DETAIL
2"
15 1/4"
2"
5"
10 1/2"
10"
14"
Faucet
Eye Wash
Attachment
8"
13"
5"
2"
15 lbs.
7-PS-747
Mounting
Detail
17 1/4"
14"
2"
15 1/4"
10"
Faucet
23 1/2"
5"
Security Skirt Enclosure
2"
37"
15 7/8"
45 lbs.
REF-B 200 Heartland Boulevard, Edgewood, NY 11717-8380
P-Trap
7-PS-727
Unit with Towel Dispenser
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, MAY 2017