Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: BCPRO1050
BC Pro 1050VA Tower Standby 120V UPS with USB port
Highlights
1050VA / 1.05kVA tower 120V standby UPS
Maintains AC output during power failures
USB port, Front panel status LEDs, 97% efficient
NEMA 5-15P input plug and 6 NEMA 5-15R outlets
Description
Tripp Lite's BCPRO1050 standby UPS offers AC surge suppression and long lasting battery support for desktop PCs, network workstations and a
wide variety of consumer and professional electronics. Uninterruptible Power Supply / UPS circuits switch to battery backup mode within
milliseconds to keep connected equipment running without interruption or data loss during power failures, brownouts and overvoltages. AC surge
suppression prevents connected equipment damage. USB communications port supports full featured monitoring and data-saving auto-shutdown
options using Tripp Lite's free PowerAlert monitoring software.
Package Includes
BCPRO1050 UPS System
USB cable
Instruction manual
Features
BCPRO1050 tower 120V standby UPS offers AC power protection from blackouts, brownouts, overvoltages and transient surges
1050VA / 705 watt UPS output capacity
Uninterruptible Power Supply / UPS operation maintains battery-derived AC output during blackouts, brownouts and overvoltages to prevent
data loss and system downtime for connected equipment
Built-in USB port enables data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download
from www.tripplite.com
7 minutes runtime at 100% load (705 watts), 23 minutes runtime at 50% load (355 watts)
107 minutes runtime for a desktop computer system consuming 80 watts continuous
6 built-in NEMA 5-15R UPS supported outlets
NEMA 5-15P input connection with 6ft / 1.8m line cord
Network grade AC surge and lightning protection is available from all outlets
97% line mode efficiency rating uses less energy and BTU emissions
Front panel LEDs indicate line / battery mode, low battery, replace battery status; Audible alarm with alarm cancel / self-test button
Hot swappable user battery replacement
Tower housing supports desk or floor placement
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
1050
Output kVA capacity (kVA)
1
Output Watt Capacity
(watts)
705
Nominal Output Voltage(s)
Supported
115V; 120V
Frequency compatibility
60 Hz
Output voltage regulation
(Battery mode)
115V (+/- 5%)
Built-in UPS output
receptacles
6 5-15R outlet(s)
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
PWM sine wave
INPUT
Rated input current (at
maximum load)
6.4A
Nominal Input Voltage(s)
Supported
120V AC
UPS input connection type
5-15P
Input circuit breaker
15A
UPS Input cord length (ft.)
6
UPS Input cord length (m)
1.8
Recommended Electrical
Service
15A 120V
Input cord length (ft.)
6
Input cord length (m)
1.8
BATTERY
Full load runtime (minutes)
7 min. (705w)
Half load runtime (minutes)
23 min. (355w)
DC system voltage (VDC)
18
Battery recharge rate
(included batteries)
Less than 4 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
RBC52 (quantity 3)
Battery Access
Battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
LEDS ALARMS & SWITCHES
LED Indicators
5 LEDs indicate line power, battery power, battery low/replace and overload status
Alarms
Audible alarm indicates power-failure and low-battery conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule
rating
510
UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
AC suppression joule rating
510
AC suppression response
time
Instantaneous
PHYSICAL
Installation form factors
supported with included
accessories
Tower
Installation form factors
supported with optional
accessories
Wallmount (UPSWM - tower mounting kit)
Primary form factor
Tower
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / inches)
11.2 x 6.8 x 7
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / cm)
28.6 x 17.1 x 17.8
UPS / Power Module weight
(lbs)
29
UPS / Power Module weight
(kg)
13.2
UPS Shipping dimensions
(height x width x depth /
inches)
15.2 x 10.8 x 11.5
UPS Shipping dimensions
(height x width x depth / cm)
38.7 x 27.3 x 29.2
Shipping weight (lbs)
29
Shipping weight (kg)
13.2
UPS housing material
Polycarbonate
ENVIRONMENTAL
Operating Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity
0 to 95%, non-condensing
AC mode BTU / hr. (full
load)
74.1
Battery mode BTU / hr. (full
load)
562.3
COMMUNICATIONS
Communications interface
USB
PowerAlert software
Free download from www.tripplite.com
Communications cable
USB interface cable included
WatchDog compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time
2-4 milliseconds
Low voltage transfer to
battery power (setpoint)
99
High voltage transfer to
battery power (setpoint)
143
SPECIAL FEATURES
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Hot swappable batteries
Green & high efficiency
features
Greater than 95% efficiency - GREEN UPS
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B
(EMI)
WARRANTY
Product Warranty Period
(Worldwide)
2-year limited warranty
Connected Equipment
Insurance (U.S., Canada &
Puerto Rico)
$200,000 Ultimate Lifetime Insurance
Related Items
Optional Products
Related Model
Description
Qty.
CT120
Instant-Read- AC Outlet Circuit Tester
1
DCATV
Network Surge Suppressor - Essential protection for TV/VCR coaxial lines
1
DNET1
Network Surge Suppressor - Essential protection for data and communication lines
1
DTEL2
Network Surge Suppressor - Essential protection for data and communication lines
1
UPSWM
Wallmount Bracket and installation accessories (4 washers, 4 screws, 1 Velcro safety
strap)
1
U022-010
10-ft. USB2.0 A/B Gold Device Cable
(A Male to B Male)
1
WATCHDOGSW
WatchDog Service Monitoring / Reboot Software
1
WEXT3-BCPRO
3-Year Extended Warranty - For BC Pro Models
1
WEXT5-BCPRO
5-Year Extended Warranty - For BC Pro Models
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=7.
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.